Activity

From 2018-09-26 to 2018-10-25

2018-10-25

11:53 PM Bug report #20215: Coordinate widget on status bar doesn't display whole numbers
I have found option to get fixed number of decimal places for coordinates display - it's inside project properites, b... Vedran Stojnovic
06:42 PM Bug report #20215 (Open): Coordinate widget on status bar doesn't display whole numbers
Coordinate widget frame is not displaying all digits properly (first digit is partially hidden). QGIS is in fullscree... Vedran Stojnovic
11:34 PM Bug report #9160 (Closed): if only one point is selected "zoom to selected" does not zoom
Applied in changeset commit:qgis|edc03030efc9e5286df14e4b79629d98701421c2. Denis Rouzaud
11:34 PM Bug report #9160 (Closed): if only one point is selected "zoom to selected" does not zoom
Applied in changeset commit:qgis|edc03030efc9e5286df14e4b79629d98701421c2. Denis Rouzaud
05:25 PM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
ok, thanks for the feedbck! Denis Rouzaud
05:14 PM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
Denis: perhaps you did not receive notification because you haven't been assigned to this issue? I assigned you now.
...
Andreas Neumann
05:09 PM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
I did not receive a notification for your reply and did not see before implementing the solution I had in mind.
see ...
Denis Rouzaud
08:01 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
@Denis: not sure if I fully understand you. Overlapping other points? That might result in a very deep zoom in, proba... Andreas Neumann
10:44 PM Bug report #20153: Edit form: Hint value is set as default value during editing
related PR https://github.com/qgis/QGIS/pull/8114 Denis Rouzaud
09:29 PM Bug report #20214 (Feedback): QGIS crashes when trying to load xml file for new svgs in style man...
Can you share the XML file? Nyall Dawson
04:45 PM Bug report #20214 (Closed): QGIS crashes when trying to load xml file for new svgs in style manager
h2. User Feedback
h2. Report Details
*Crash ID*: 8d5ade14451aa30dd70d11d1d8df701994e63390
*Stack Trace...
Chris Franklin
08:47 PM Bug report #20217: QGIS crashes while editing layer
I think I might have run the calculation then got the crash when I pressed the "Save modifications" button because de... Harrissou Santanna
08:29 PM Bug report #20217 (Closed): QGIS crashes while editing layer
h2. User Feedback
I was copying features from a mapinfo .tab 2D point layer to a postgis table. Features got paste...
Harrissou Santanna
07:03 PM Feature request #20216 (Open): Drop-down menu for adding line object features
There are many add feature options which can be found in Edit menu, but there are no buttons for them on toolbar, so ... Vedran Stojnovic
04:17 PM Bug report #18973: Wrong identification of feature in a View
Thanks. It is the same problem as with virtual layers and spatialite layers. When no primary key is defined, an id is... Hugo Mercier
03:57 PM Feature request #20194 (Closed): ValueMap content cannot be exported or copy pasted
Applied in changeset commit:qgis|7a984c3f6977e8074fc7b58671d1e069f27b88ab. Anonymous
03:57 PM Feature request #20194 (Closed): ValueMap content cannot be exported or copy pasted
Applied in changeset commit:qgis|7a984c3f6977e8074fc7b58671d1e069f27b88ab. Anonymous
01:17 PM Bug report #19939: mesh: missing arrows around the edge of the canvas
fixed in 3.3 Peter Petrik
01:15 PM Bug report #19939 (Closed): mesh: missing arrows around the edge of the canvas
Applied in changeset commit:qgis|b0bd6293366a31f2bd7fa347aa104c326bc2d088. Peter Petrik
01:15 PM Bug report #19939 (Closed): mesh: missing arrows around the edge of the canvas
Applied in changeset commit:qgis|b0bd6293366a31f2bd7fa347aa104c326bc2d088. Peter Petrik
12:59 PM Feature request #16953: Make overriding a layer's CRS harder so users don't change it when trying...
I'll try to collect reports from users in the wild here to support my argument.
Just spotted: https://lists.fossgi...
Johannes Kroeger
10:25 AM Bug report #11244: Invalid values on Date/Time widget editor
I don't remember fixing this (but my brain sometimes forgets things)
If it works now, it's probably fixed.
Matthias Kuhn
10:20 AM Bug report #19517 (Closed): Serious problem with rasters statistics calculated by QGIS with estim...
Applied in changeset commit:qgis|70d4a276da8eaa4c5b3e84c467b95a3611b4b9c7. Anonymous
10:20 AM Bug report #19517 (Closed): Serious problem with rasters statistics calculated by QGIS with estim...
Applied in changeset commit:qgis|70d4a276da8eaa4c5b3e84c467b95a3611b4b9c7. Anonymous
10:15 AM Bug report #20202: DB Manager: Pyhon error when importing from PostGIS to GPKG with drag and drop
Alessandro Pasotti wrote:
> No errors here, can you share data and project?
I will but I will be able only later ...
Giovanni Manghi
10:10 AM Bug report #19724 (Closed): Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized...
Applied in changeset commit:qgis|d0813a88229372069c64dc868c813f4e6848a1df. Borys Jurgiel
10:10 AM Bug report #19724 (Closed): Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized...
Applied in changeset commit:qgis|d0813a88229372069c64dc868c813f4e6848a1df. Borys Jurgiel
09:24 AM Bug report #20213 (Open): Network setting doesn't follow proxy settings for web access in Windows 10
QGIS 3.3.0-Master doesn't follow it's own proxy settings for web access in Windows 10 Enterprise.
It only follows th...
Christoph Candido
08:56 AM Bug report #20212 (Feedback): QGIS Bonn 3.2 Crashing on exit
This crash comes from a python plugin. Can you start QGIS without plugins (with a fresh profile)? Alessandro Pasotti
08:52 AM Bug report #20212 (Closed): QGIS Bonn 3.2 Crashing on exit
I have replicated the effect many times even uninstalling and at fresh install I copy the message at exit below:
h2....
Berns Buenaobra
03:13 AM Bug report #19546: QGIS 3 slow on macOS at high resolutions
Here is an installer for QGIS 3.2.3 built with Qt 5.11.1.
http://www.kyngchaos.com/files/software/qgis/QGIS-macOS-...
William Kyngesburye

2018-10-24

01:54 AM Bug report #19546: QGIS 3 slow on macOS at high resolutions
I finally got Qt 5.11 installed, built QGIS 3.2.3 with that. Tested on a retina Mac with no slow issue. Though that... William Kyngesburye
09:51 PM Bug report #19207: Tracing with offset produce intersections
it is still an issue in actual master 3.3. is there a chance for fixing in 3.4?
thanks!
Jan Lippmann
09:13 PM Bug report #20211 (Closed): Crash on exiting QGIS master
This did it. You were right. Old versions of qgis libraries around 2.99 and such.
After removing everything and re...
Andreas Neumann
09:13 PM Bug report #20211 (Closed): Crash on exiting QGIS master
This did it. You were right. Old versions of qgis libraries around 2.99 and such.
After removing everything and re...
Andreas Neumann
09:05 PM Bug report #20211: Crash on exiting QGIS master
The log is useful, but can't really explain why such errors would occur. Hum, when I had similar errors in the past, ... Even Rouault
09:02 PM Bug report #20211: Crash on exiting QGIS master
Andreas Neumann wrote:
>
> Am I the only one experiencing such crashes on closing?
I'm experiencing such crashes...
Tobias Wendorff
09:01 PM Bug report #20211: Crash on exiting QGIS master
Now attaching the full valgrind log. Andreas Neumann
08:56 PM Bug report #20211: Crash on exiting QGIS master
Seems like valgrind stopped outputting information.
Should I run it again with --error-limit=no ?
Perhaps the n...
Andreas Neumann
08:51 PM Bug report #20211 (Closed): Crash on exiting QGIS master
I am experiencing crashes when closing QGIS with the most recent master:
When I open QGIS (no plugins enabled, com...
Andreas Neumann
09:04 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
>
> > I think this commit is not related to this topic.
> > I ...
Antonio Viscomi
10:48 AM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Antonio Viscomi wrote:

> I think this commit is not related to this topic.
> I talk about editing vertex not ab...
Giovanni Manghi
07:51 PM Bug report #20195: Theme does not work well with new Mac Mojave dark theme
see https://github.com/qgis/QGIS/pull/8309 Denis Rouzaud
01:21 PM Bug report #20195: Theme does not work well with new Mac Mojave dark theme
yes, most likely this one
https://bugreports.qt.io/browse/QTBUG-68891
apparently fixed in upcoming 5.12 (planned ...
Denis Rouzaud
07:35 PM Feature request #16432 (Closed): Update the field list in layer.dataProvider().forceReload()
layer.setDataSource() can be used instead Borys Jurgiel
07:35 PM Feature request #16432 (Closed): Update the field list in layer.dataProvider().forceReload()
layer.setDataSource() can be used instead Borys Jurgiel
07:35 PM Feature request #16432 (Closed): Update the field list in layer.dataProvider().forceReload()
layer.setDataSource() can be used instead Borys Jurgiel
07:22 PM Bug report #20210 (Closed): Crash Upon Exiting
h2. User Feedback
h2. Report Details
*Crash ID*: d5a2ce396a22c42eaad3e4a6718907052075897e
*Stack Trace...
Michael Jabot
06:22 PM Feature request #9531: Allow QGIS Relations to use composite keys
We are interested in funding this issue. Unfortunately we have to limit ourselves to a developer from the US because... cgsbob -
06:08 PM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
what about zoom in up to the point that the feature's symbol is not overlapping others or is sufficiently distant (in... Denis Rouzaud
06:07 PM Bug report #20202: DB Manager: Pyhon error when importing from PostGIS to GPKG with drag and drop
No errors here, can you share data and project? Alessandro Pasotti
11:02 AM Bug report #20202: DB Manager: Pyhon error when importing from PostGIS to GPKG with drag and drop
Despite the error the layers seems to be imported anyway. Giovanni Manghi
11:00 AM Bug report #20202: DB Manager: Pyhon error when importing from PostGIS to GPKG with drag and drop
The same operations is ok with Spatialite. Giovanni Manghi
10:58 AM Bug report #20202 (Closed): DB Manager: Pyhon error when importing from PostGIS to GPKG with drag...
create a GPKG
in DB manager try to import in this GPKG a PostGIS layer using drag and drop
after the options di...
Giovanni Manghi
05:38 PM Bug report #20164 (Closed): Layouts: Scale-based Rendering error
Alessandro Pasotti
05:38 PM Bug report #20193 (Closed): DBManager fails to display error messages with virtual layers
Implemented with https://github.com/qgis/QGIS/pull/8283 Alessandro Pasotti
05:38 PM Bug report #20193 (Closed): DBManager fails to display error messages with virtual layers
Implemented with https://github.com/qgis/QGIS/pull/8283 Alessandro Pasotti
05:27 PM Bug report #19641: Debian buster dependency broken
Hi,
I have tried the proposed workaround with the nightly build in debian :
sudo apt-get update
.../...
Réc...
Gerard OpenSideFlanker
05:24 PM Bug report #20204: QGIS crashes when clicking on attribute table header and clicking on sort
> Can you say how I can start the installed qgis with a clean profile?
Menu Settings --> User Profiles --> new pro...
Harrissou Santanna
03:52 PM Bug report #20204: QGIS crashes when clicking on attribute table header and clicking on sort
Giovanni Manghi wrote:
> Reginald Carlier wrote:
> > Giovanni,
> >
> > Can you say how I can start the installed...
Giovanni Manghi
03:51 PM Bug report #20204: QGIS crashes when clicking on attribute table header and clicking on sort
Reginald Carlier wrote:
> Giovanni,
>
> Can you say how I can start the installed qgis with a clean profile?
> O...
Giovanni Manghi
03:49 PM Bug report #20204: QGIS crashes when clicking on attribute table header and clicking on sort
Giovanni,
Can you say how I can start the installed qgis with a clean profile?
Or is there a method to disable al...
Reginald Carlier
02:39 PM Bug report #20204 (Closed): QGIS crashes when clicking on attribute table header and clicking on ...
Reginald Carlier wrote:
> I tested it on a shapefile and on a postgis layer. both crashed.
> At the moment I cannot...
Giovanni Manghi
02:39 PM Bug report #20204 (Closed): QGIS crashes when clicking on attribute table header and clicking on ...
Reginald Carlier wrote:
> I tested it on a shapefile and on a postgis layer. both crashed.
> At the moment I cannot...
Giovanni Manghi
01:54 PM Bug report #20204: QGIS crashes when clicking on attribute table header and clicking on sort
I tested it on a shapefile and on a postgis layer. both crashed.
At the moment I cannot delete my profile because th...
Reginald Carlier
01:05 PM Bug report #20204 (Feedback): QGIS crashes when clicking on attribute table header and clicking o...
It happens with all tables from any kind of datasource? try with a new/clean profile. Giovanni Manghi
01:05 PM Bug report #20204 (Feedback): QGIS crashes when clicking on attribute table header and clicking o...
It happens with all tables from any kind of datasource? try with a new/clean profile. Giovanni Manghi
11:51 AM Bug report #20204 (Closed): QGIS crashes when clicking on attribute table header and clicking on ...
As I wanted to sort the table on multiple fields I clicked on the header and after that I clicked on sort.
Result: Q...
Reginald Carlier
04:34 PM Bug report #5520 (Closed): Wrong boundingbox values in GetCapabilities for empty layers
Applied in changeset commit:qgis|da22f7ccac76a28691e0daeda9debd21cd182586. Paul Blottiere
04:34 PM Bug report #5520 (Closed): Wrong boundingbox values in GetCapabilities for empty layers
Applied in changeset commit:qgis|da22f7ccac76a28691e0daeda9debd21cd182586. Paul Blottiere
03:49 PM Bug report #20209 (Closed): QGIS crashes when creating a new GRASS location/mapset
Cuando doy un nombre a la localización en Grass, el programa siempre se cierra. Este es el reporte que me sale.
W...
Agustín Rodríguez
03:46 PM Bug report #20207 (Open): GeoPackage column misalignment after spatial join due to fid attribute
Giovanni Manghi
03:41 PM Bug report #20207: GeoPackage column misalignment after spatial join due to fid attribute
Giovanni Manghi wrote:
> do the original layers get changed in the process? if no then there is no data loss (not th...
Andreas Wicht
03:38 PM Bug report #20207 (Feedback): GeoPackage column misalignment after spatial join due to fid attribute
do the original layers get changed in the process? if no then there is no data loss (not that a wrong result is better). Giovanni Manghi
01:21 PM Bug report #20207 (Closed): GeoPackage column misalignment after spatial join due to fid attribute
Issue might be related to: #19708
Having a polygon layer in gpkg format and a point layer in *.shp format if you
...
Andreas Wicht
03:33 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
I try to summarise:
1 - I starded editing_
2 - I move the mouse on polygon 65592 to edit his vertex;
3 - vertex ed...
Antonio Viscomi
03:21 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > Antonio Viscomi wrote:
> > > Antonio Viscomi wrote:
> > > > G...
Antonio Viscomi
02:48 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > Antonio Viscomi wrote:
> > > Giovanni Manghi wrote:
> > > > >...
Antonio Viscomi
02:45 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Giovanni Manghi wrote:
> > > > > the data are already attached...
Giovanni Manghi
02:44 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > > > the data are already attached
> >
> > opening the projec...
Antonio Viscomi
02:43 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Giovanni Manghi wrote:
> > > the data are already attached
>
> opening the project asks for a layer that maybe wa...
Antonio Viscomi
02:31 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master

> > the data are already attached
opening the project asks for a layer that maybe was not attached here (or mayb...
Giovanni Manghi
02:25 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > I struggle to understand the problem even after having watched ...
Antonio Viscomi
02:24 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Giovanni Manghi wrote:
> I struggle to understand the problem even after having watched the screencasts.
> Attachin...
Antonio Viscomi
01:34 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
I struggle to understand the problem even after having watched the screencasts.
Attaching a project with data possib...
Giovanni Manghi
01:31 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Hi,
> > vertex editor don't hook the polygon boundary
> >
...
Antonio Viscomi
01:31 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Hi,
> > vertex editor don't hook the polygon boundary
> >
...
Antonio Viscomi
01:23 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Hi,
> vertex editor don't hook the polygon boundary
>
> I attach 3 screencast that sho...
Antonio Viscomi
01:23 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Hi,
> vertex editor don't hook the polygon boundary
>
> I attach 3 screencast that sho...
Antonio Viscomi
01:23 PM Bug report #20206: issues on vertex selection with the new "edit vertex tool" in QGIS Master
Antonio Viscomi wrote:
> Hi,
> vertex editor don't hook the polygon boundary
>
> I attach 3 screencast that sho...
Antonio Viscomi
01:21 PM Bug report #20206 (Closed): issues on vertex selection with the new "edit vertex tool" in QGIS Ma...
Hi,
vertex editor don't hook the polygon boundary
I attach 3 screencast that show this issues:
- the first (ver...
Antonio Viscomi
03:32 PM Bug report #19803: QGIS Crashes when tensorflow is imported from internal python console
QGIS Crashes when tensorflow is imported from internal python console
Hello,
I have similar issue as Asab Abass. ...
Samson Boadi
03:04 PM Bug report #20140: QgsExternalResourceWidgetWrapper crashes
I can reproduce that on Linux.
But it crashes before opening the file dialog.
David Signer
02:50 PM Bug report #20200 (Closed): wrong sequence detection under postgres
Applied in changeset commit:qgis|797911e1fe1f93eecb819862850877f4c022ea63. Anonymous
02:50 PM Bug report #20200 (Closed): wrong sequence detection under postgres
Applied in changeset commit:qgis|797911e1fe1f93eecb819862850877f4c022ea63. Anonymous
12:47 PM Bug report #20200 (In Progress): wrong sequence detection under postgres
PR https://github.com/qgis/QGIS/pull/8302 Alessandro Pasotti
12:47 PM Bug report #20200 (In Progress): wrong sequence detection under postgres
PR https://github.com/qgis/QGIS/pull/8302 Alessandro Pasotti
02:10 PM Bug report #18973: Wrong identification of feature in a View
yes, fully agreed. This improvement could be another step towards the using geopackages instead of shapefile matteo ghetta
11:32 AM Bug report #18973: Wrong identification of feature in a View
> Side comment: this is really what a user must do to see a (spatial) view show up in its GPKG datasource in QGIS?!
...
Harrissou Santanna
11:07 AM Bug report #18973: Wrong identification of feature in a View

> then registered the view in the gpkg_content table:
>
> [...]
>
> Finally registered also the geometric inf...
Giovanni Manghi
09:15 AM Bug report #18973: Wrong identification of feature in a View
hi guys, of course! In attach a geopackage with a single layer.
I created the view within the DB manager (a view ...
matteo ghetta
09:00 AM Bug report #18973: Wrong identification of feature in a View
Sounds something similar to #19930 (Fixed by https://github.com/qgis/QGIS/pull/8052) but that one was spatialite Alessandro Pasotti
08:50 AM Bug report #18973 (Feedback): Wrong identification of feature in a View
Can you provide your test data / project ?
Does the field that serves as unique identifier in the view is correct ?
Hugo Mercier
02:07 PM Feature request #20208 (Open): GUI translations in Transifex
The actual policy of GUI translation is to keep in Transifex only the Master version of QGIS.
I think that for trans...
stefano campus
01:57 PM Bug report #19524 (Feedback): [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Yes.
Already fixed if installed via Homebrew.
Will bbe finxed in standalone package for 3.4
Denis Rouzaud
01:57 PM Bug report #19524 (Feedback): [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Yes.
Already fixed if installed via Homebrew.
Will bbe finxed in standalone package for 3.4
Denis Rouzaud
01:56 PM Bug report #18914 (Closed): [macOS] Plugin list corrupted by wrongly placed checkboxes on Mac
feel free to reopen if needed Denis Rouzaud
01:56 PM Bug report #18914 (Closed): [macOS] Plugin list corrupted by wrongly placed checkboxes on Mac
feel free to reopen if needed Denis Rouzaud
01:56 PM Bug report #18943 (Closed): QGIS Server on MacOS X High Sierra
feel free to reopen if needed Denis Rouzaud
01:56 PM Bug report #18943 (Closed): QGIS Server on MacOS X High Sierra
feel free to reopen if needed Denis Rouzaud
01:42 PM Bug report #20205: QGIS 3 can not launch
I have used QGIS-OSGeo4W-3.2.3-1-Setup-x86_64.exe
During installation is everything ok. The problem appears when I...
Ana del Campo
01:08 PM Bug report #20205 (Feedback): QGIS 3 can not launch
Out of the blue? or did you just installed? standalone or osgeo4w? Giovanni Manghi
01:08 PM Bug report #20205 (Feedback): QGIS 3 can not launch
Out of the blue? or did you just installed? standalone or osgeo4w? Giovanni Manghi
01:01 PM Bug report #20205 (Closed): QGIS 3 can not launch
I can't launch QGIS 3.x on my computers. There is no error during installation. But I get the attached message when I... Ana del Campo
12:35 PM Bug report #16725 (Feedback): Parser error in Atlas 'Output filename expression' textbox - badly ...
Giovanni Manghi
10:35 AM Bug report #16725: Parser error in Atlas 'Output filename expression' textbox - badly handled error
Not reproduced with QGIS 3.3 where the message box is replaced by a message bar Hugo Mercier
12:06 PM Bug report #15709: bad match of valeurs with virtual layer
It is due to the virtual layer that does not have a unique id column defined.
In this case, the "id" will be an in...
Hugo Mercier
11:39 AM Bug report #18286 (Closed): cannot filter by $geometry, $length, $area etc.
Applied in changeset commit:qgis|d9a10280eb1d10f19457e845bda8b80d128d19c4. Hugo Mercier
11:39 AM Bug report #18286 (Closed): cannot filter by $geometry, $length, $area etc.
Applied in changeset commit:qgis|d9a10280eb1d10f19457e845bda8b80d128d19c4. Hugo Mercier
10:16 AM Bug report #18286 (In Progress): cannot filter by $geometry, $length, $area etc.
PR https://github.com/qgis/QGIS/pull/8298 Hugo Mercier
10:16 AM Bug report #18286 (In Progress): cannot filter by $geometry, $length, $area etc.
PR https://github.com/qgis/QGIS/pull/8298 Hugo Mercier
09:31 AM Bug report #18286: cannot filter by $geometry, $length, $area etc.
Hmmm, apparently the filter can fetch geometries when needed (this is what I observe with memory layers)
https://g...
Hugo Mercier
09:22 AM Bug report #18286: cannot filter by $geometry, $length, $area etc.
This is because attribute table doesn't fetch geometries (for performance reasons). Nyall Dawson
09:18 AM Bug report #18286: cannot filter by $geometry, $length, $area etc.
Confirmed.
When tested with a shapefile, "$" fields do not work. However, when trying with a memory layer it works.
Hugo Mercier
11:35 AM Bug report #20203: Crash when opening attribute table in form mode (potentially related to relati...
New, different stackt trace:... Andreas Neumann
11:27 AM Bug report #20203: Crash when opening attribute table in form mode (potentially related to relati...
More info:
If one opens the table first in "table mode" and then later switches to "form mode", the crash is not h...
Andreas Neumann
11:23 AM Bug report #20203: Crash when opening attribute table in form mode (potentially related to relati...
So far, I only tested on Windows 7, where the database is on a separate server somewhere in the LAN (with latency), n... Andreas Neumann
11:18 AM Bug report #20203 (Open): Crash when opening attribute table in form mode (potentially related to...
To replicate this issue you need the "EWS" project of Kanton Zug. It contains a complex form in the layer "EWS Anlage... Andreas Neumann
11:24 AM Bug report #20199: Aggregate function is not working
Dan Isaacs wrote:
> It seems possibly as though, unlike a normal expression, aggregate expressions need to be stored...
Giovanni Manghi
11:21 AM Bug report #19127 (Closed): [Digitizing] Snapping marker is not shown when the advanced digitizin...
Harrissou Santanna
11:05 AM Bug report #19127 (Feedback): [Digitizing] Snapping marker is not shown when the advanced digitiz...
Giovanni Manghi
10:47 AM Bug report #19127: [Digitizing] Snapping marker is not shown when the advanced digitizing panel i...
Is a duplicate of #18104 ? Loïc BARTOLETTI
10:58 AM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...
I see several issues in the provided project:
- virtual layers: selection works fine, but the identification tool id...
Hugo Mercier
10:43 AM Bug report #16822 (Feedback): Copy/paste features from a table in one project to another table in...

> Not reproducable on 3.3.0
then we should close this I guess.
Giovanni Manghi
08:46 AM Bug report #16822: Copy/paste features from a table in one project to another table in different ...
Confirmed on 2.18.16.
Not reproducable on 3.3.0
Hugo Mercier
10:42 AM Bug report #17760 (Feedback): Pasting from one table to another causes crash (2.18.15)
Giovanni Manghi
08:39 AM Bug report #17760: Pasting from one table to another causes crash (2.18.15)
Can't reproduce on 2.18.16 / linux.
Can't reproduce on 3.3.0
Hugo Mercier
10:42 AM Bug report #19632 (Feedback): copy-paste doesn't work
let's leave this open in feedback mode, then will close if no feedback is received. Giovanni Manghi
10:42 AM Bug report #19632 (Feedback): copy-paste doesn't work
let's leave this open in feedback mode, then will close if no feedback is received. Giovanni Manghi
08:33 AM Bug report #19632: copy-paste doesn't work
Can't reproduce. Tested on linux, version 3.3.0 commit:225c9227af.
I've tested with a GeoJSON layer with 93 fields...
Hugo Mercier
09:20 AM Bug report #20201 (Closed): Forms in search mode: relation reference widgets show "equal to" be d...
When opening an attribute table and is switching to "Search mode" (Ctrl-F), all widget values should be excluded from... Andreas Neumann
08:20 AM Bug report #16025 (Closed): [macOS] Control feature rendering order will crash QGIS
Nyall Dawson
07:13 AM Bug report #16025: [macOS] Control feature rendering order will crash QGIS
Confirmed that it is ok in QGIS 3.2. Liangxu Wang
08:16 AM Bug report #20099 (Closed): Locator bar does not update the filter of algorithms according to act...
Applied in changeset commit:qgis|7ecd303acca1b6ef14b4e8ee891f87c7ce99017e. Anonymous
08:16 AM Bug report #20099 (Closed): Locator bar does not update the filter of algorithms according to act...
Applied in changeset commit:qgis|7ecd303acca1b6ef14b4e8ee891f87c7ce99017e. Anonymous
08:15 AM Bug report #20134 (Closed): crash when trying to set exluded layer in QGIS Server WMS capabilities
Applied in changeset commit:qgis|6b917e09e14df14268f21ee51f767f73b6b241fc. Anonymous
08:15 AM Bug report #20134 (Closed): crash when trying to set exluded layer in QGIS Server WMS capabilities
Applied in changeset commit:qgis|6b917e09e14df14268f21ee51f767f73b6b241fc. Anonymous
06:32 AM Bug report #19911: The vertex editor is not synchronized with vertex movements in edit mode
Regis Haubourg wrote:
> the above PR has been merged, thansk Loic!
> I confirm it solves the update of coordinates ...
Loïc BARTOLETTI

2018-10-23

10:30 PM Bug report #20200 (Closed): wrong sequence detection under postgres
there is an issue with sequence detection under postgres when the layer is not in the public schema.
the problem is ...
Jan Lippmann
10:13 PM Bug report #20039: toolbar icons not correctly aligned
Harrissou Santanna wrote:
> @Nyall, is it a very recent fix? Because I just get it (using commit:"c94eefb6df" - a le...
Andrea Giudiceandrea
07:05 PM Bug report #20039: toolbar icons not correctly aligned
The symmetric classification one is a different bug - can you open a new report for this? Nyall Dawson
05:24 PM Bug report #20039 (Reopened): toolbar icons not correctly aligned
@Nyall, is it a very recent fix? Because I just get it (using commit:"c94eefb6df" - a less than a day commit). See at... Harrissou Santanna
05:24 PM Bug report #20039 (Reopened): toolbar icons not correctly aligned
@Nyall, is it a very recent fix? Because I just get it (using commit:"c94eefb6df" - a less than a day commit). See at... Harrissou Santanna
05:24 PM Bug report #20039 (Reopened): toolbar icons not correctly aligned
@Nyall, is it a very recent fix? Because I just get it (using commit:"c94eefb6df" - a less than a day commit). See at... Harrissou Santanna
10:34 AM Bug report #20039 (Closed): toolbar icons not correctly aligned
Giovanni Manghi
10:01 AM Bug report #20039: toolbar icons not correctly aligned
Nyall Dawson wrote:
> This should be fixed in master already. Do you still see it?
Thank you,
all right!!!
salvatore fiandaca
09:55 AM Bug report #20039 (Feedback): toolbar icons not correctly aligned
Nyall Dawson
09:55 AM Bug report #20039: toolbar icons not correctly aligned
This should be fixed in master already. Do you still see it? Nyall Dawson
08:32 AM Bug report #20039: toolbar icons not correctly aligned
I removed "operating system" since it's not only related to windows. Loïc BARTOLETTI
09:57 PM Feature request #13303 (Feedback): Saving changes in shape files when saving project or/and closi...
Afaics, it asks whether you'd like to save the changes in the layer either when closing the project or closing QGIS. ... Harrissou Santanna
09:57 PM Feature request #13303 (Feedback): Saving changes in shape files when saving project or/and closi...
Afaics, it asks whether you'd like to save the changes in the layer either when closing the project or closing QGIS. ... Harrissou Santanna
08:40 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Regis Haubourg wrote:
> Works here nicely in commit:5e6eef3, using "DEL" key.
Sorry Ragis,
I think this commit...
Antonio Viscomi
04:57 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
and this is the correct file Antonio Viscomi
04:54 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Antonio Viscomi wrote:
> Regis Haubourg wrote:
> > Works here nicely in commit:5e6eef3, using "DEL" key.
> > Can ...
Antonio Viscomi
04:50 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Regis Haubourg wrote:
> Works here nicely in commit:5e6eef3, using "DEL" key.
> Can you confirm and if necessary s...
Antonio Viscomi
04:50 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Regis Haubourg wrote:
> Works here nicely in commit:5e6eef3, using "DEL" key.
> Can you confirm and if necessary s...
Antonio Viscomi
02:17 PM Bug report #20139 (Feedback): Please make vertex panel to be able to delete a vertex in QGIS 3
Works here nicely in commit:5e6eef3, using "DEL" key.
Can you confirm and if necessary show a screencast of the con...
Regis Haubourg
08:23 PM Bug report #20134 (In Progress): crash when trying to set exluded layer in QGIS Server WMS capabi...
PR https://github.com/qgis/QGIS/pull/8291
I could not reproduce the crash but I've found a serious bug in the dial...
Alessandro Pasotti
08:23 PM Bug report #20134 (In Progress): crash when trying to set exluded layer in QGIS Server WMS capabi...
PR https://github.com/qgis/QGIS/pull/8291
I could not reproduce the crash but I've found a serious bug in the dial...
Alessandro Pasotti
07:12 PM Bug report #20199: Aggregate function is not working
It seems possibly as though, unlike a normal expression, aggregate expressions need to be stored in _exactly_ the sam... Dan Isaacs
06:58 PM Bug report #20199: Aggregate function is not working
Test file uploaded. I've included a reference function (using ref Functions plugin) for comparison. You should see th... Dan Isaacs
06:37 PM Bug report #20199 (Feedback): Aggregate function is not working
More information is needed: steps followed, field type, expression used and even data to test...
Thanks
Harrissou Santanna
05:55 PM Bug report #20199 (Closed): Aggregate function is not working
When using the aggregate function , the field calculator shows the correct figure, but the attribute table is empty. Dan Isaacs
07:06 PM Bug report #20195: Theme does not work well with new Mac Mojave dark theme
Isn't this fundamentally a qt issue? Nyall Dawson
01:53 PM Bug report #20195: Theme does not work well with new Mac Mojave dark theme
!https://i.imgur.com/oErP2rn.png! Denis Rouzaud
01:49 PM Bug report #20195 (Closed): Theme does not work well with new Mac Mojave dark theme
see !https://i.imgur.com/uhoTAhh.png! Denis Rouzaud
06:48 PM Bug report #19911: The vertex editor is not synchronized with vertex movements in edit mode
the above PR has been merged, thansk Loic!
I confirm it solves the update of coordinates in the editor panel.
I ...
Regis Haubourg
05:26 PM Bug report #20198 (Closed): QGIS Server WFS DescribeFeatureType not following TYPENAME parameter
Call to DescribeFeatureType always returns all data for all layers in project, regarding TYPENAME parameter exists or... Uroš Preložnik
05:00 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
I had the same problem (zip.dll not found) after the "Express Desktop Install". Then I installed libzip-bin and libzi... Alessandro Perego
04:24 PM Bug report #20164 (Feedback): Layouts: Scale-based Rendering error
I don't see any issue. Please check the attached image and uncheck scale dependant visibility.
Alessandro Pasotti
04:24 PM Bug report #20164 (Feedback): Layouts: Scale-based Rendering error
I don't see any issue. Please check the attached image and uncheck scale dependant visibility.
Alessandro Pasotti
04:24 PM Bug report #20164 (Feedback): Layouts: Scale-based Rendering error
I don't see any issue. Please check the attached image and uncheck scale dependant visibility.
Alessandro Pasotti
04:17 PM Feature request #20197 (Open): Show PostgreSQL- Foreign Table in DB-Manager project tree
The DB-Manager for PostGIS does not show Foreign Tables in a PostGIS database schema.
Normal Tables, Views and Mater...
Max Bohnet
04:14 PM Bug report #20099 (In Progress): Locator bar does not update the filter of algorithms according t...
PR https://github.com/qgis/QGIS/pull/8284 Alessandro Pasotti
04:14 PM Bug report #20099 (In Progress): Locator bar does not update the filter of algorithms according t...
PR https://github.com/qgis/QGIS/pull/8284 Alessandro Pasotti
04:12 PM Bug report #17243 (In Progress): QGIS 3 vertex editor problems
Regis Haubourg
04:01 PM Bug report #19410: Unable to remove Custom Auxiliary Field
Hi,
confirmed in master. It is even nastier:
- create manually an auxiliary db from layer properties / create
-...
Regis Haubourg
04:01 PM Bug report #19410: Unable to remove Custom Auxiliary Field
Hi,
confirmed in master. It is even nastier:
- create manually an auxiliary db from layer properties / create
-...
Regis Haubourg
04:01 PM Bug report #19410: Unable to remove Custom Auxiliary Field
Hi,
confirmed in master. It is even nastier:
- create manually an auxiliary db from layer properties / create
-...
Regis Haubourg
03:28 PM Bug report #20193: DBManager fails to display error messages with virtual layers
No problem :) Hugo Mercier
03:15 PM Bug report #20193: DBManager fails to display error messages with virtual layers
Sorry Hugo, I didn't see your comment before I made the PR.
Yes: there is no way to store an error message, that'...
Alessandro Pasotti
03:01 PM Bug report #20193 (In Progress): DBManager fails to display error messages with virtual layers
PR https://github.com/qgis/QGIS/pull/8283 Alessandro Pasotti
03:01 PM Bug report #20193 (In Progress): DBManager fails to display error messages with virtual layers
PR https://github.com/qgis/QGIS/pull/8283 Alessandro Pasotti
01:35 PM Bug report #20193: DBManager fails to display error messages with virtual layers
From what I can see, there is at least the following problem:... Hugo Mercier
12:23 PM Bug report #20193: DBManager fails to display error messages with virtual layers
as far as I remember it does not affect only virtual layers- Giovanni Manghi
11:27 AM Bug report #20193: DBManager fails to display error messages with virtual layers
Also occurs in QGIS 3.2.2 Regis Haubourg
11:25 AM Bug report #20193 (Closed): DBManager fails to display error messages with virtual layers
In QGIS master, error messages when trying to work with virtual layers are no more catched.
IN QGIS 2.1, just iss...
Regis Haubourg
03:19 PM Bug report #19868: copy/paste style doesn't works
patch has been merged, please test with next daily build and report if everything is ok! Denis Rouzaud
03:02 PM Bug report #19868 (Closed): copy/paste style doesn't works
Applied in changeset commit:qgis|daf53940421de07a5daf7e419cfbf06826ad2469. Denis Rouzaud
12:19 PM Bug report #19868: copy/paste style doesn't works
PR tested, it works here. Many thanks Denis! Regis Haubourg
03:11 PM Bug report #20180: Tracing with Offset produces QGIS Crash
I cannot say I'm really happy with the solution (which was to remove the clear button from this particular widget), p... Alessandro Pasotti
10:57 AM Bug report #20180 (Closed): Tracing with Offset produces QGIS Crash
Applied in changeset commit:qgis|5c28693d4935c36d36585630a7a9487bc5820d9c. Anonymous
10:57 AM Bug report #20180 (Closed): Tracing with Offset produces QGIS Crash
Applied in changeset commit:qgis|5c28693d4935c36d36585630a7a9487bc5820d9c. Anonymous
02:23 PM Bug report #20196 (Closed): [Data-defined] An expression with just the field in it is not recogni...
Looks like I've reported two years ago already. Harrissou Santanna
02:23 PM Bug report #20196 (Closed): [Data-defined] An expression with just the field in it is not recogni...
Looks like I've reported two years ago already. Harrissou Santanna
01:58 PM Bug report #20196 (Closed): [Data-defined] An expression with just the field in it is not recogni...
Discussion at http://osgeo-org.1560.x6.nabble.com/QGIS-Developer-Rotate-or-Offset-Point-symbol-how-do-they-work-Or-ar... Harrissou Santanna
02:10 PM Bug report #18396 (Feedback): Feature Attributes box overlap
Could you specify which OS is affected. Could you also try if latest 3.2 and master are affected ? Regis Haubourg
02:10 PM Bug report #18396 (Feedback): Feature Attributes box overlap
Could you specify which OS is affected. Could you also try if latest 3.2 and master are affected ? Regis Haubourg
02:09 PM Bug report #19940 (Feedback): Spatialite column with AUTOINCREMENT block with forms
Can you share your database? I created a spatialite from dbmanager using the "export to file" button, and I couldn't ... Regis Haubourg
11:31 AM Bug report #19940 (Open): Spatialite column with AUTOINCREMENT block with forms
If you create the spatialite from "Create New Spatialite Layer" it works but a spatialite created from DB Manager (wa... Loïc BARTOLETTI
01:40 PM Feature request #20194 (Closed): ValueMap content cannot be exported or copy pasted
It's not possible to copy value maps to a spreadsheet application. It would be very handy sometimes, since the import... Matthias Kuhn
11:58 AM Bug report #20175 (Closed): master - Copy style and paste style does not work
Regis Haubourg
11:48 AM Bug report #18362: Rotate tool doesn't work for newly created points in transaction group context
Still true in recent master Regis Haubourg
11:45 AM Bug report #12079 (Closed): Identify highlight color does not take alpha channel into account
Regis Haubourg
11:41 AM Feature request #6669 (Closed): Display table and fields comments for postgis datasources
Closing, too old issue now Regis Haubourg
11:41 AM Feature request #6669 (Closed): Display table and fields comments for postgis datasources
Closing, too old issue now Regis Haubourg
11:41 AM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
When I set breakpoints on exception raises with visual studio, I cannot reproduce the error. Looks like a synchronisa... Hugo Mercier
11:35 AM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
I actually have a different stack trace
*Stack Trace*...
Hugo Mercier
11:19 AM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
I'm struggling with visual studio. Do you remember exactly what exception was it ? Hugo Mercier
11:16 AM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
For reference - I spent some time looking at this one and the root cause is that an exception raised in the virtual l... Nyall Dawson
10:27 AM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
I indeed have a crash, under Windows only.
I think #19271 is the same problem.
Hugo Mercier
11:40 AM Bug report #11845 (Closed): QGIS startup is slow on windows with --configpath option
QGIS 3 is arriving as next LTR, and confipath option has changed. Please reopen if necessary Regis Haubourg
11:40 AM Bug report #11845 (Closed): QGIS startup is slow on windows with --configpath option
QGIS 3 is arriving as next LTR, and confipath option has changed. Please reopen if necessary Regis Haubourg
11:39 AM Bug report #8360 (Closed): odbc import fails if table name contain encodecharacters
Closing, it's a too old issue. Regis Haubourg
11:37 AM Bug report #18293 (Closed): New node tool is really slow to index for big project with many edita...
Tested in latest master 3.3, and it's fast fast! happy me. Regis Haubourg
11:37 AM Bug report #18293 (Closed): New node tool is really slow to index for big project with many edita...
Tested in latest master 3.3, and it's fast fast! happy me. Regis Haubourg
11:34 AM Feature request #20106 (Feedback): When editing a regular shape the dragging needs to give a cons...
If I understand correctly, you want the equivalent of a resize tool?
I can add it into https://github.com/qgis/QGI...
Loïc BARTOLETTI
11:15 AM Bug report #19939 (In Progress): mesh: missing arrows around the edge of the canvas
PR: https://github.com/qgis/QGIS/pull/8278 Peter Petrik
11:15 AM Bug report #19939 (In Progress): mesh: missing arrows around the edge of the canvas
PR: https://github.com/qgis/QGIS/pull/8278 Peter Petrik
11:13 AM Bug report #18018 (Feedback): a virtual layer make the project empty
Could you provide a sample project file with data that allows to reproduce the issue. It tried to reproduce with no s... Regis Haubourg
11:13 AM Bug report #18018 (Feedback): a virtual layer make the project empty
Could you provide a sample project file with data that allows to reproduce the issue. It tried to reproduce with no s... Regis Haubourg
11:13 AM Bug report #18018 (Feedback): a virtual layer make the project empty
Could you provide a sample project file with data that allows to reproduce the issue. It tried to reproduce with no s... Regis Haubourg
10:53 AM Bug report #17785 (Feedback): Virtual layers (nested), all layers disappear from project file (.q...

Trying to replicate here. ...
Regis Haubourg
10:53 AM Bug report #17785 (Feedback): Virtual layers (nested), all layers disappear from project file (.q...

Trying to replicate here. ...
Regis Haubourg
10:44 AM Bug report #20047: SQL queries on virtual layers frequently crashes QGIS
Nyall Dawson wrote:
> - the exception thrown in sqlite when the expression is invalid is not caught, despite there b...
Hugo Mercier
10:20 AM Bug report #20192 (Feedback): qgis 3.2 crashing when applying a changed rule based style on a geo...
It happens only if the datasource is o a network? Is the style saved in the db or a separate file? Can you share samp... Giovanni Manghi
10:20 AM Bug report #20192 (Feedback): qgis 3.2 crashing when applying a changed rule based style on a geo...
It happens only if the datasource is o a network? Is the style saved in the db or a separate file? Can you share samp... Giovanni Manghi
05:27 AM Bug report #20192 (Closed): qgis 3.2 crashing when applying a changed rule based style on a geopa...
Adding a new rule based style to an existing style file on geopackage layer. QGIS crashes when Applied. damien stephens
09:50 AM Bug report #19176 (Feedback): QGIS 3.0.3 crashes when using 'DB Manager' and 'PostGIS execute SQL'
Is it still occuring in QGIS 3.2 or latest master ? Regis Haubourg
09:50 AM Bug report #19176 (Feedback): QGIS 3.0.3 crashes when using 'DB Manager' and 'PostGIS execute SQL'
Is it still occuring in QGIS 3.2 or latest master ? Regis Haubourg
09:47 AM Bug report #19271 (Closed): Crash on SQL queries - virtual layers
Tested here with latest nightlies.
I get "database error" messages in a popup but no QGIS crash.
For sure the...
Regis Haubourg
09:47 AM Bug report #19271 (Closed): Crash on SQL queries - virtual layers
Tested here with latest nightlies.
I get "database error" messages in a popup but no QGIS crash.
For sure the...
Regis Haubourg
09:47 AM Bug report #19271 (Closed): Crash on SQL queries - virtual layers
Tested here with latest nightlies.
I get "database error" messages in a popup but no QGIS crash.
For sure the...
Regis Haubourg
09:25 AM Bug report #20176: Area (cartesian) calculations differ between layers of different projections
Nyall Dawson wrote:
> This is totally expected behavior -- if you measure area or length using the Cartesian method,...
Dan Isaacs
02:20 AM Bug report #20176 (Closed): Area (cartesian) calculations differ between layers of different proj...
This is totally expected behavior -- if you measure area or length using the Cartesian method, then it's using the la... Nyall Dawson
02:20 AM Bug report #20176 (Closed): Area (cartesian) calculations differ between layers of different proj...
This is totally expected behavior -- if you measure area or length using the Cartesian method, then it's using the la... Nyall Dawson
08:40 AM Bug report #18742 (Closed): [Layout] In multisize pages layout, exporting to PDF does not behave ...
Applied in changeset commit:qgis|5e6eef3e54d83c0bc983cd8f8f5f32194b0519fd. Nyall Dawson
08:40 AM Bug report #18742 (Closed): [Layout] In multisize pages layout, exporting to PDF does not behave ...
Applied in changeset commit:qgis|5e6eef3e54d83c0bc983cd8f8f5f32194b0519fd. Nyall Dawson
07:17 AM Bug report #18742 (In Progress): [Layout] In multisize pages layout, exporting to PDF does not be...
Nyall Dawson
08:40 AM Bug report #20186 (Closed): restricting layers to be added to legend to those turned on in the se...
Applied in changeset commit:qgis|8cf64c8a51d7d2d9f6c60f2632ac4e20f27f595d. Nyall Dawson
08:40 AM Bug report #20186 (Closed): restricting layers to be added to legend to those turned on in the se...
Applied in changeset commit:qgis|8cf64c8a51d7d2d9f6c60f2632ac4e20f27f595d. Nyall Dawson
02:53 AM Bug report #20186 (In Progress): restricting layers to be added to legend to those turned on in t...
Nyall Dawson
08:36 AM Bug report #20032 (Feedback): Attributes Form gives Wrong value for $area
What are:
- the CRS
- the ellipsoid
Also, what are the area from measurement tools or postgis/spatialite st_area...
Loïc BARTOLETTI
08:21 AM Bug report #20155 (Closed): crash loading style from postgres db when there is no "layer_styles" ...
Applied in changeset commit:qgis|897322a4ea985e42644a7ae2f7a9e1e85a22b859. Anonymous
08:21 AM Bug report #20155 (Closed): crash loading style from postgres db when there is no "layer_styles" ...
Applied in changeset commit:qgis|897322a4ea985e42644a7ae2f7a9e1e85a22b859. Anonymous
08:08 AM Bug report #20132: Vector toolbar contains no tools
These are shortcuts for Processing (plugin) tools, which you'll see that is checked under Plugin Manager dialog.
(Un...
Harrissou Santanna
04:38 AM Bug report #20132: Vector toolbar contains no tools
Hi,
I suddenly started having the same issue on one of our workstations... We have never enabled plugins and we hav...
Donald Newlands

2018-10-22

11:22 PM Bug report #20146: QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output.
Giovanni Manghi wrote:
> yeah... there are a bunch of GRASS tools that can output multiple rasters... so the solutio...
Odysseas Vl
11:12 PM Bug report #18628: QGIS 3: vertex editor highlights features in non-visible layers
Tested in 3.2.
I turned off 'enable snapping by default' (in digitizing options). Now the vertex editor only acts...
Carolyn Krause
10:56 PM Bug report #19896 (Closed): Composer margin expression does not work
Applied in changeset commit:qgis|c94eefb6df0bf9e504452986da943d7b9f8574c8. Nyall Dawson
10:56 PM Bug report #19896 (Closed): Composer margin expression does not work
Applied in changeset commit:qgis|c94eefb6df0bf9e504452986da943d7b9f8574c8. Nyall Dawson
04:47 AM Bug report #19896 (In Progress): Composer margin expression does not work
Nyall Dawson
10:49 PM Bug report #19724: Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized in most ...
Thank you very much, Borys. Harrissou Santanna
09:15 PM Bug report #19724: Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized in most ...
See https://github.com/qgis/QGIS/pull/8269 Borys Jurgiel
08:32 PM Bug report #19724: Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized in most ...
I'm just fixing it. Borys Jurgiel
07:39 PM Bug report #19724: Algorithm shortcuts in Vector & Raster menus shouldn't be capitalized in most ...
Hi, May I ask if there's any progress on this?
If using title case for dialogs seems to make dialogs look pretty in ...
Harrissou Santanna
10:22 PM Bug report #18333 (Closed): QgsPolygonV2.vertexAt NotImplementedError, in memory layer, polygons ...
Let's close as won't fix then. It works in 3.x Nyall Dawson
06:34 PM Bug report #18333: QgsPolygonV2.vertexAt NotImplementedError, in memory layer, polygons with z-di...
sorry, there is no plan on my side to work on 2.18 bindings Denis Rouzaud
10:18 PM Bug report #20188 (Feedback): Error while merge vector layer
You must try with a much recent version, possibly qgis 3.3 (as is scheduled to be the next 3.4/ltr). Giovanni Manghi
08:01 PM Bug report #20188 (Closed): Error while merge vector layer
facing issue many times while merging vector layers from Vector -> Data management tools -> Merge vector layers ( in ... Amit Kulkarni
09:34 PM Feature request #20191 (Open): Rule-based symbology- cancel option for adding categories or ranges
In rule-based symbology, if you choose the option to add categories or ranges to the rule, there is no cancel option.... Josh Waters
09:27 PM Feature request #20190 (Open): Rule-based symbology legend values
Under rule-based symbology, if I add ranges to the rule, it auto-populates legend entries. Those seem to get lost ho... Josh Waters
08:31 PM Bug report #18988 (Closed): QGIS Server rendering different from Desktop rendering
The image is valid so i'm closing this. Shouldn't we enable multithreading on Travis by default?
I wrote that test s...
Tudor Bărăscu
03:22 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
... Paul Blottiere
02:42 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
Will check later on and close this after retesting. Thanks a lot Paul for your valuable work.
I have a pull reques...
Tudor Bărăscu
02:24 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
Hi Tudor,
The PR fixing the freezing issue is merged now (https://github.com/qgis/QGIS/pull/8228).
Can you chec...
Paul Blottiere
08:24 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Denis Rouzaud wrote:
> This issue should be fixed in next release with Qt updated (it happened with Qt 5.9).
Is t...
Jason Ferrier
08:05 PM Bug report #20189 (Open): Muted colours in legend when exporting as PDF
Occurs in 3.3 (master) and 3.2.3
When exporting as PDF I want lines and text to export as vector so that the text...
Rob Willson
08:04 PM Bug report #11244 (Feedback): Invalid values on Date/Time widget editor
Giovanni Manghi
06:36 PM Bug report #11244: Invalid values on Date/Time widget editor
Matthias, can this be closed? Denis Rouzaud
07:41 PM Bug report #20176: Area (cartesian) calculations differ between layers of different projections
Dan Isaacs wrote:
> Just to add, in case it's useful, I re-projected the 'Stands' Layer to EPSG:27700 and the area r...
Giovanni Manghi
07:41 PM Bug report #20176: Area (cartesian) calculations differ between layers of different projections
Dan Isaacs wrote:
> Just to add, in case it's useful, I re-projected the 'Stands' Layer to EPSG:27700 and the area r...
Giovanni Manghi
06:26 PM Bug report #20176: Area (cartesian) calculations differ between layers of different projections
Just to add, in case it's useful, I re-projected the 'Stands' Layer to EPSG:27700 and the area reads correctly again.... Dan Isaacs
12:36 PM Bug report #20176 (Open): Area (cartesian) calculations differ between layers of different projec...
Giovanni Manghi
11:18 AM Bug report #20176: Area (cartesian) calculations differ between layers of different projections
Just tested it with 3.3.0-Master QGIS code revision 99f3419446 the problem remains. Dan Isaacs
09:33 AM Bug report #20176 (Feedback): Area (cartesian) calculations differ between layers of different pr...
Please test with 3.3 Nyall Dawson
09:26 AM Bug report #20176 (Closed): Area (cartesian) calculations differ between layers of different proj...
Attached is a test project. In one layer 'Lake' is a lake of known area (11Ha) in EPSG:27700. The area is correct acc... Dan Isaacs
07:33 PM Bug report #18286: cannot filter by $geometry, $length, $area etc.
Tudor Bărăscu wrote:
> @Giovanni I think this issue should have a High priority as I discovered more problems (conse...
Giovanni Manghi
07:33 PM Bug report #18286: cannot filter by $geometry, $length, $area etc.
Tudor Bărăscu wrote:
> @Giovanni I think this issue should have a High priority as I discovered more problems (conse...
Giovanni Manghi
01:38 PM Bug report #18286: cannot filter by $geometry, $length, $area etc.
@Giovanni I think this issue should have a High priority as I discovered more problems (consequences) tied to it.
Fo...
Tudor Bărăscu
07:31 PM Bug report #20186: restricting layers to be added to legend to those turned on in the selected ma...
can do Rob Willson
07:24 PM Bug report #20186 (Feedback): restricting layers to be added to legend to those turned on in the ...
Can you ask in the developers mailing list if this change was introduced by design? Thanks! Giovanni Manghi
07:24 PM Bug report #20186 (Feedback): restricting layers to be added to legend to those turned on in the ...
Can you ask in the developers mailing list if this change was introduced by design? Thanks! Giovanni Manghi
05:27 PM Bug report #20186 (Closed): restricting layers to be added to legend to those turned on in the se...
in QGIS 2.18 when you had selected for your layout to "follow visibility preset" and then went to "Add layer to legen... Rob Willson
07:28 PM Bug report #20172 (Closed): Adding a new vertex ignore snap on polygon whit self intersection
Giovanni Manghi
03:21 PM Bug report #20172: Adding a new vertex ignore snap on polygon whit self intersection
Giovanni Manghi wrote:
> > sorry I don't know how explain it better
>
> make a screencast, thanks.
Sorry,
I'm...
Antonio Viscomi
10:35 AM Bug report #20172: Adding a new vertex ignore snap on polygon whit self intersection

> sorry I don't know how explain it better
make a screencast, thanks.
Giovanni Manghi
10:05 AM Bug report #20172: Adding a new vertex ignore snap on polygon whit self intersection

> -I try to add a vertex to a polygon with self intersection in;
> -the vertex that I need to add don't snap to th...
Antonio Viscomi
09:53 AM Bug report #20172: Adding a new vertex ignore snap on polygon whit self intersection
Giovanni Manghi wrote:
> It could be me, but I have not understand exactly what the issue is. Can you add detailed s...
Antonio Viscomi
09:30 AM Bug report #20172 (Feedback): Adding a new vertex ignore snap on polygon whit self intersection
It could be me, but I have not understand exactly what the issue is. Can you add detailed step by step operations to ... Giovanni Manghi
06:56 PM Feature request #20171: Unable to create a folder within the file name widget when saving layers
Actually, no. Just tested on 2.18 and at least there, it does seem to be the same behavior: OK is disabled until the ... Harrissou Santanna
06:48 PM Feature request #20171: Unable to create a folder within the file name widget when saving layers
Are you sure this is really a regression? Alessandro Pasotti
06:41 PM Bug report #20155 (In Progress): crash loading style from postgres db when there is no "layer_sty...
PR https://github.com/qgis/QGIS/pull/8267 Alessandro Pasotti
06:41 PM Bug report #20155 (In Progress): crash loading style from postgres db when there is no "layer_sty...
PR https://github.com/qgis/QGIS/pull/8267 Alessandro Pasotti
06:37 PM Bug report #18365 (Closed): range widget doesn't show value
seems to be fixed Denis Rouzaud
06:37 PM Bug report #18365 (Closed): range widget doesn't show value
seems to be fixed Denis Rouzaud
06:28 PM Bug report #18395: Calculating new field works inside QGIS Python console but not in standalone p...
sorry, no idea on my side Denis Rouzaud
06:28 PM Bug report #18395: Calculating new field works inside QGIS Python console but not in standalone p...
sorry, no idea on my side Denis Rouzaud
06:15 PM Bug report #18891: Changed Ruler distance units do not "stick" - instead always revert to Meters ...
it uses the units from the project properties.
I agree this is not very clear and optimal.
Will ask on the mailing ...
Denis Rouzaud
05:33 PM Bug report #20180 (In Progress): Tracing with Offset produces QGIS Crash
PR https://github.com/qgis/QGIS/pull/8266 Alessandro Pasotti
05:33 PM Bug report #20180 (In Progress): Tracing with Offset produces QGIS Crash
PR https://github.com/qgis/QGIS/pull/8266 Alessandro Pasotti
12:41 PM Bug report #20180 (Closed): Tracing with Offset produces QGIS Crash
h2. User Feedback
While erasing the offset value from the tracing tool the crash occurred.
I think it might be ...
Alexander Barth
05:28 PM Feature request #20187 (Open): [Digitizing] Allow the "Offset curves" and "Simplify features" too...
This will be more consistent with the gneral behavior of digitizing tools: process on selection.
and I guess this is...
Harrissou Santanna
05:26 PM Bug report #19868: copy/paste style doesn't works
PR https://github.com/qgis/QGIS/pull/8265
I will merge asap
Denis Rouzaud
05:11 PM Bug report #19868: copy/paste style doesn't works
found the upstream bug
https://bugreports.qt.io/browse/QTBUG-53384
this affects 5.6.0, fixed in 5.6.2....and Ubunt...
Denis Rouzaud
04:55 PM Bug report #19868: copy/paste style doesn't works
no issue on Fedora.
It might be a Qt issue.
QMetaEnum::fromType is from Qt 5.5.
What is your Qt version?
Denis Rouzaud
04:02 PM Bug report #19868: copy/paste style doesn't works
if you have any line with metaenum written in it it'd be interesting. Feel free to post the whole ouptput on pastebin... Denis Rouzaud
03:54 PM Bug report #19868: copy/paste style doesn't works
As described in #20178 I have the same issue.
Not sure it is related or it can be useful, but I copy here the messag...
Alessandro Sarretta
03:35 PM Bug report #19868 (Feedback): copy/paste style doesn't works
as already discussed, there is no line about missing metaenum here.
can you provide more details?
Denis Rouzaud
05:26 PM Bug report #20178 (Closed): Not possible to paste a style because all "Paste Style" options are g...
Denis Rouzaud
03:50 PM Bug report #20178: Not possible to paste a style because all "Paste Style" options are grayed
Loïc BARTOLETTI wrote:
> Is it the same as #19868 ?
Yes, it seems exactly the same
Alessandro Sarretta
03:32 PM Bug report #20178: Not possible to paste a style because all "Paste Style" options are grayed
most likely.
I would really need some more info to help here (not on Ubuntu)
Denis Rouzaud
02:59 PM Bug report #20178: Not possible to paste a style because all "Paste Style" options are grayed
Is it the same as #19868 ? Loïc BARTOLETTI
12:45 PM Bug report #20178: Not possible to paste a style because all "Paste Style" options are grayed
Some people with QGIS 3.3.0-Master on Windows, commit:99f3419 seem not to have any issue.
My QGIS is updated with co...
Alessandro Sarretta
10:41 AM Bug report #20178 (Closed): Not possible to paste a style because all "Paste Style" options are g...
1- Copy a style from a layer
2- Try to paste the style to a different layer: all "Paste Style" options are greyed an...
Alessandro Sarretta
05:19 PM Bug report #20185 (Open): [Digitizing] Inconsistencies between input dialogs from advanced digiti...
When using the:
- rotate tool: you get an input widget with needed parameters. You *press Enter or Esc* to validate ...
Harrissou Santanna
05:01 PM Bug report #20184 (Open): [Options] Missing "cap style" parameter in Options --> digitizing tab -...
When using the "Offset curve" tool from the advanced digitizing toolbar, you get a input dialog with options like "Jo... Harrissou Santanna
05:01 PM Bug report #20183 (Closed): QGIS Backwards Incompatible Changes names incorrect
Hi,
When porting a Qgis plugin from qgis2 to 3 using https://qgis.org/api/api_break.html I found some errors in th...
Richard Boon
05:00 PM Bug report #20182 (Closed): importing dxf, it loses z or elevation attribute.
When import a contour layer from dxf, z or elevation attribute is disappeared.
I can see only line color, thinkenss ...
yonghyun kim
03:55 PM Bug report #20175: master - Copy style and paste style does not work
yes!! salvatore fiandaca
02:57 PM Bug report #20175: master - Copy style and paste style does not work
Is it the same as #19868 ? Loïc BARTOLETTI
08:42 AM Bug report #20175 (Closed): master - Copy style and paste style does not work
by copying all the categories and pasting them into another layer, the destination layer becomes transparent and no l... salvatore fiandaca
03:25 PM Feature request #20181 (Open): [mdal] Open Meshes from the command-line
It would be great to open meshes directly from the commmand-line. E.g.
qgis mesh.2dm
Currently this only works ...
Michel Kuhlmann
02:38 PM Bug report #17727: Problem with choosing function by Double click in Field Calculator in QGIS 2.99
https://github.com/qgis/QGIS/pull/8262 Denis Rouzaud
01:07 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Nicolai Mogensen wrote:
> Batsu Yoba wrote:
> > Giovanni Manghi wrote:
> > > I think that now the installer works ...
Nicolai Mogensen
12:53 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Batsu Yoba wrote:
> Giovanni Manghi wrote:
> > I think that now the installer works as expected, please reopen if n...
Nicolai Mogensen
12:53 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Batsu Yoba wrote:
> Giovanni Manghi wrote:
> > I think that now the installer works as expected, please reopen if n...
Nicolai Mogensen
12:53 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Batsu Yoba wrote:
> Giovanni Manghi wrote:
> > I think that now the installer works as expected, please reopen if n...
Nicolai Mogensen
10:43 AM Feature request #20179 (Open): Transpose attribute tables in composer/layout to vertical
Sometimes it's better to lay out tables vertically (meaning that the fields are carried in rows not in columns). For ... Dan Isaacs
10:15 AM Bug report #20177 (Open): [mdal] Not possible to delete extra-dataset
In the mesh properties panel, it is possible to 'Assign Extra Dataset to Mesh'.
But it not possible to remove one...
Michel Kuhlmann
09:52 AM Bug report #20174 (Closed): Copy style and paste style does not work
Duplicate of #20174 Saber Razmjooei
09:52 AM Bug report #20174 (Closed): Copy style and paste style does not work
Duplicate of #20174 Saber Razmjooei
08:42 AM Bug report #20174 (Closed): Copy style and paste style does not work
by copying all the categories and pasting them into another layer, the destination layer becomes transparent and no l... salvatore fiandaca
08:15 AM Bug report #19703 (Closed): Open MDAL data dialog does NOT show All files
Applied in changeset commit:qgis|4fa62e9b3bbe6383db2b682e89003a0a85428bad. Richard Duivenvoorde
08:15 AM Bug report #19703 (Closed): Open MDAL data dialog does NOT show All files
Applied in changeset commit:qgis|4fa62e9b3bbe6383db2b682e89003a0a85428bad. Richard Duivenvoorde
04:50 AM Bug report #19060 (Feedback): Then insert image in layout
Please re-test with QGIS 3.3 Nyall Dawson
04:50 AM Bug report #19101 (Feedback): Scale bar in Layout always opens at height of 11.9 mm
Can you share an example project? Nyall Dawson
04:14 AM Bug report #19574 (Closed): Map Composer doesn't load map anymore
Closed due to lack of feedback Nyall Dawson
04:13 AM Bug report #19728 (Closed): crash moving layout items
Closed due to lack of feedback/detail Nyall Dawson
04:12 AM Bug report #19498 (Closed): Layout - some vector layers not rendered
Closed due to lack of feedback Nyall Dawson
04:12 AM Bug report #19854 (Closed): Print Layout
Closed due to lack of feedback Nyall Dawson

2018-10-21

01:32 AM Bug report #17765 (Closed): TestQgsComposerUtils::readOldDataDefinedPropertyMap() Compared values...
Test/class no longer exists Nyall Dawson
01:32 AM Bug report #17766 (Closed): TestQgsComposerUtils::fontDescentMM() 'qgsDoubleNear( QgsComposerUtil...
Test/class no longer exists Nyall Dawson
01:32 AM Bug report #18487 (Closed): Print composer extremely slow outputting PDF's
Closed due to lack of feedback Nyall Dawson
06:10 PM Feature request #19718: Add Keyboard Shortcut for the the 'Add Delimited Text Layer'
Devdatta, while an official shortcut can be set, you can meanwhile add your own shortcut in the Settings --> Keyboard... Harrissou Santanna
01:43 PM Feature request #19718: Add Keyboard Shortcut for the the 'Add Delimited Text Layer'
Hey, I'll try to tackle this, could you assign it to me? evangelos vafeiadis
12:20 PM Bug report #20173 (Closed): KML loading bug
Hi,
There is a bug with loading some kml/kmz files with raster data:
steps to reproduce:
1.create a kmz file wit...
Idan Miara
09:55 AM Bug report #19099: Data defined Size legend is wrong when using separated symbols
Think some of the other issues Harrissou linked are related to this problem. Attached file is a scheme of some test I... Martina Savarese
04:44 AM Bug report #18892 (Closed): Scale jump from mouse tremor
Applied in changeset commit:qgis|b3e526338b8924f0beb81ca611cb4e2d3637c258. Denis Rouzaud
04:44 AM Bug report #18892 (Closed): Scale jump from mouse tremor
Applied in changeset commit:qgis|b3e526338b8924f0beb81ca611cb4e2d3637c258. Denis Rouzaud

2018-10-20

09:17 PM Bug report #20172 (Closed): Adding a new vertex ignore snap on polygon whit self intersection
Hi all,
I noticed another issues...
If there are some topological errors,
and I edit the feature to solve them,
...
Antonio Viscomi
02:42 PM Bug report #18304 (Feedback): Python error when importing a shapefile to PostGIS in DB Manager
chris Mr wrote:
> Giovanni Manghi wrote:
> > Description and subject updated.
>
> I ran into this problem today ...
Giovanni Manghi
01:06 PM Bug report #20169 (Closed): Gnome: Open Gdal dialog shows silly long filter list with empty items
Closing myself, as I found out this is a Gnome typical thing, to be fixed upstream.
You can test it with whatever ...
Richard Duivenvoorde
12:51 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Giovanni Manghi wrote:
> I think that now the installer works as expected, please reopen if necessary.
hi, i just...
Batsu Yoba
12:51 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Giovanni Manghi wrote:
> I think that now the installer works as expected, please reopen if necessary.
hi, i just...
Batsu Yoba
08:19 AM Feature request #20171 (Open): Unable to create a folder within the file name widget when saving ...
let's take a temporary layer you'd like to make permanent
Click on the icon, opening the "save scratch layer" dialog...
Harrissou Santanna
06:21 AM Bug report #18872: Symbol Selector Window 'overflows' the screen on small resolutions
This is still a real issue for users of small screens. I'm running into this problem using QGIS 3.2.3 on Windows 10, ... Ryan Dalton
05:37 AM Bug report #16219: SVG Fill symbol behavior does not seem consistent with other fill symbol layers
I was wondering the exact same thing. I always found it an odd quirk. Mars Sjoden

2018-10-19

11:57 PM Bug report #17773: No Retina / HiDPI support in 2.99 on osx
Great news!!! :D Ugo Santana
08:55 PM Bug report #17773 (Closed): No Retina / HiDPI support in 2.99 on osx
Applied in changeset commit:qgis|ea982fe3d268fd3d56833b17a2310607a00e29b9. Denis Rouzaud
08:55 PM Bug report #17773 (Closed): No Retina / HiDPI support in 2.99 on osx
Applied in changeset commit:qgis|ea982fe3d268fd3d56833b17a2310607a00e29b9. Denis Rouzaud
04:39 PM Bug report #17773: No Retina / HiDPI support in 2.99 on osx
PR on its way :)
https://github.com/qgis/QGIS/pull/8242
Denis Rouzaud
11:32 PM Bug report #18892: Scale jump from mouse tremor
Thank you! Much appreciated. Garth Fletcher
10:36 PM Bug report #18892: Scale jump from mouse tremor
PR on its way
both things should be fixed
see https://github.com/qgis/QGIS/pull/8247
Denis Rouzaud
08:26 PM Bug report #18892: Scale jump from mouse tremor

To replicate:
open any project, set scale to, say, 1:40,000
select + zoom tool
using mouse
click down in ...
Garth Fletcher
08:03 PM Bug report #18892 (Feedback): Scale jump from mouse tremor
Denis Rouzaud
08:02 PM Bug report #18892: Scale jump from mouse tremor
I am not able to reproduce.
Can you describe precise steps on what to do?
Are you using the trackpad or a mouse?
Denis Rouzaud
11:22 PM Bug report #18304: Python error when importing a shapefile to PostGIS in DB Manager
Giovanni Manghi wrote:
> Description and subject updated.
I ran into this problem today as well. Has anyone tried...
chris Mr
10:50 PM Bug report #20155: crash loading style from postgres db when there is no "layer_styles" table in ...
the title "qgis crash - load style from qml file for geometryless layer" of this issue is no more correct
can a re...
Jan Lippmann
10:28 PM Bug report #20155: crash loading style from postgres db when there is no "layer_styles" table in ...
Peter Petrik wrote:
> unable to reproduce.
>
> Jan Lippmann wrote:
> > load from style file is not correct! only...
Jan Lippmann
03:07 PM Bug report #20155: crash loading style from postgres db when there is no "layer_styles" table in ...
unable to reproduce.
Jan Lippmann wrote:
> load from style file is not correct! only click on "Load Style..." but...
Peter Petrik
10:40 PM Bug report #20147 (Closed): [edit-in-place] - difference deletes invalid geometries
Applied in changeset commit:qgis|71e2a6be7e5d59d6ee7d137c28754ae527a8465b. Anonymous
10:40 PM Bug report #20147 (Closed): [edit-in-place] - difference deletes invalid geometries
Applied in changeset commit:qgis|71e2a6be7e5d59d6ee7d137c28754ae527a8465b. Anonymous
10:40 PM Bug report #20101 (Closed): [Processing] "Buffer" is not listed as an edit in place algorithm for...
Applied in changeset commit:qgis|51c3c2a6182684961572a0e1f90c6d8c55af21ea. Anonymous
10:40 PM Bug report #20101 (Closed): [Processing] "Buffer" is not listed as an edit in place algorithm for...
Applied in changeset commit:qgis|51c3c2a6182684961572a0e1f90c6d8c55af21ea. Anonymous
10:18 PM Bug report #20133 (Closed): map composer scale error
Applied in changeset commit:qgis|0a662576a74a742e1a8936a6f8dcfcc5a33607ae. Nyall Dawson
10:18 PM Bug report #20133 (Closed): map composer scale error
Applied in changeset commit:qgis|0a662576a74a742e1a8936a6f8dcfcc5a33607ae. Nyall Dawson
02:12 AM Bug report #20133: map composer scale error
https://github.com/qgis/QGIS/pull/8233 fixes this for me -- it's an issue with precision in the widget showing the cu... Nyall Dawson
08:58 PM Bug report #3975: PDF exports on OSX always convert text to outlines
This is still an issue in QGIS 3.2 on Windows 10 as well, though it has evolved. I *can* get text to export, but only... Nick S
08:26 PM Bug report #3975: PDF exports on OSX always convert text to outlines
Barend Kobben wrote:
> Well, you’re missing the fact that all text is now cut up letter by letter....
>
> That’s...
Barend Kobben
08:22 PM Bug report #3975: PDF exports on OSX always convert text to outlines
Well, you’re missing the fact that all text is now cut up letter by letter....

That’s pretty useless, if you want...
Barend Kobben
07:40 PM Bug report #3975 (Feedback): PDF exports on OSX always convert text to outlines
I have been trying by unchecking 'Draw text as outlines' in the label settings
!https://i.imgur.com/Gv101OH.png!
...
Denis Rouzaud
08:57 PM Feature request #11103 (Closed): Support for retina displays (HiDPI)
fixed in master, to be released in 3.4
https://github.com/qgis/QGIS/pull/8242
Youhou!
Denis Rouzaud
08:57 PM Feature request #11103 (Closed): Support for retina displays (HiDPI)
fixed in master, to be released in 3.4
https://github.com/qgis/QGIS/pull/8242
Youhou!
Denis Rouzaud
08:04 PM Bug report #16025: [macOS] Control feature rendering order will crash QGIS
reporter specifies QGIS 2.18.
I guess it'll be a won't fix?
Denis Rouzaud
07:57 PM Bug report #19314 (Closed): 3.2 crashes on startup on a Mac
Denis Rouzaud
07:55 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
This issue should be fixed in next release with Qt updated (it happened with Qt 5.9). Denis Rouzaud
07:54 PM Bug report #19546: QGIS 3 slow on macOS at high resolutions
I had a discussion with William Kyngesburye who told me that this should be fixed in Qt 5.12.
Let's see what comes o...
Denis Rouzaud
07:49 PM Bug report #20170 (Closed): "no result buffer" warning, application restart required after PostGI...
Running QGIS 3.2.0-Bonn on MacOS Mojave, though this has been a consistent problem since QGIS 2.x.
I run queries a...
Will McDonald
06:24 PM Feature request #20102: Pre-render canvas outside of visible area
This screenshot is taken while scrolling canvas in QGis 3.2.3
qgis/main_canvas_preview_jobs is set to true
"Whe...
Alexey T
05:48 PM Bug report #20169 (Closed): Gnome: Open Gdal dialog shows silly long filter list with empty items
See screenshot. I see this only on my Linux machines (both on Debian and Flatpak version).
To reproduce:
- Open D...
Richard Duivenvoorde
05:24 PM Bug report #19703: Open MDAL data dialog does NOT show All files
See https://github.com/qgis/QGIS/pull/8245 Richard Duivenvoorde
04:53 PM Bug report #19703: Open MDAL data dialog does NOT show All files

Ok, I had a look into this myself, and found that the value of mFilter in qgsfilewidget.ccp
https://github.com/q...
Richard Duivenvoorde
05:05 PM Bug report #17661 (Feedback): Qgis and data crash on Mac
Giovanni Manghi
03:53 PM Bug report #17661: Qgis and data crash on Mac
Which scale bar in the main window, can you please send screenshot? Scale has format x:y and it cannot be scrolled. Peter Petrik
04:36 PM Bug report #18035 (Feedback): QGIS crashes upon opening of layer labelling (etc.) panel
Giovanni Manghi
03:49 PM Bug report #18035: QGIS crashes upon opening of layer labelling (etc.) panel
maybe duplicate of #16575 ? Peter Petrik
04:20 PM Bug report #18465: 'Load' button in Layer Properties > Style > Min/max settings has disappeared
Peter Petrik wrote:
> In QGIS 3.3, the loading of min/max settings work on clicking on "apply" button.
not handy ...
Giovanni Manghi
04:20 PM Bug report #18465: 'Load' button in Layer Properties > Style > Min/max settings has disappeared
In QGIS 3.3, the loading of min/max settings work on clicking on "apply" button. Peter Petrik
03:59 PM Bug report #18394 (Feedback): QGIS 3 crashes when Processing dragged out of main window and then ...
Unable to reproduce on MacOS 10.14 (18A391) with QGIS 3.3 master. Garth mentioned it cannot be reproduced with 3.0.2 Peter Petrik
03:03 PM Feature request #20168 (Open): add interactive digiting tool to split multipart to single parts
Hi all,
I often use the "Multipart to single parts" plugin developed by Alexandre Neto.
I think this is very usef...
Antonio Viscomi
02:30 PM Feature request #20167 (Open): [Processing] In batch mode, the "Remove row" button does not remov...
Open an algorithm dialog
switch to batch mode
add a bunch of files from system
Try to delete one file in the middl...
Harrissou Santanna
02:29 PM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > > The plugin I need was ported and located I experimental plugi...
Giovanni Manghi
02:28 PM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
Giovanni Manghi wrote:
> > The plugin I need was ported and located I experimental plugin... So this ticket can be e...
Antonio Viscomi
02:22 PM Bug report #20162: Please provide an Edition tool able to split multipart in single parts

> The plugin I need was ported and located I experimental plugin... So this ticket can be erased
I think the int...
Giovanni Manghi
11:21 AM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
Giovanni Manghi wrote:
> > Ok but I thinking that a button on editing toolbar that acts directely on feature will be...
Antonio Viscomi
10:58 AM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
> Ok but I thinking that a button on editing toolbar that acts directely on feature will be more useful
re-file th...
Giovanni Manghi
02:21 AM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
FYI, the plugin is already ported to 3. You'd need to enable "show experimental plugins" in the Plugins settings tab ... Harrissou Santanna
02:21 PM Bug report #13986 (Feedback): Server segfaults when requesting certain GetLegendGraphics without ...
Giovanni Manghi
01:16 PM Bug report #13986: Server segfaults when requesting certain GetLegendGraphics without bbox
I tried to reproduce this issue with the current master branch (3.X), but without success. So it seems specific to QG... Paul Blottiere
01:55 PM Bug report #20154 (Closed): Broken clustering method selection in GRASS v.cluster processing algo...
Giovanni Manghi
01:53 PM Bug report #20160: GRASS Tool "r.stats.quantile.out" Getting Conflicting Parameters
https://github.com/qgis/QGIS/pull/8241 Giovanni Manghi
01:52 PM Bug report #18894 (Closed): Qgis crashes on deleting auxiliary storage
Paul Blottiere
01:52 PM Bug report #18894: Qgis crashes on deleting auxiliary storage
Already fixed by https://github.com/qgis/QGIS/pull/6603 in QGIS 3.2. Paul Blottiere
01:52 PM Bug report #18978 (Closed): Crash when deleting auxillary storage table
Paul Blottiere
01:52 PM Bug report #18978: Crash when deleting auxillary storage table
Already fixed by https://github.com/qgis/QGIS/pull/6603 in QGIS 3.2. Paul Blottiere
12:52 PM Bug report #20092: GeoPackage SQL issues in DB Manager
I am seeing this kind of problems also on QGIS 3.2.3 on linux.
In my case the layers were imported using Save as s...
Alexandre Neto
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
11:43 AM Feature request #20130: Identify tool does not work on mesh layer
Let's change it to a bug so that someone will fix it ;)
See discussion here:
https://github.com/qgis/QGIS/pull/7582
Saber Razmjooei
10:57 AM Bug report #20161 (Feedback): Crash after loading several spatial tables from Esri File GDB 10.6....
Please attach data we can use to replicate the issue. Giovanni Manghi
10:57 AM Bug report #20161 (Feedback): Crash after loading several spatial tables from Esri File GDB 10.6....
Please attach data we can use to replicate the issue. Giovanni Manghi
10:57 AM Bug report #20161 (Feedback): Crash after loading several spatial tables from Esri File GDB 10.6....
Please attach data we can use to replicate the issue. Giovanni Manghi
10:56 AM Bug report #20138: "Show selected features" attribute table behavior doesn't work
Matthew Jurewicz wrote:
> Giovanni Manghi wrote:
> > Matthew Jurewicz wrote:
> > > The issue doesn't seem to be fi...
Giovanni Manghi
10:02 AM Bug report #20136 (Closed): Requesting a feature by its feature id not working with filtered gpkg
Applied in changeset commit:qgis|391ec8a5dd4508f75b6538ab7be309379695add4. Even Rouault
10:02 AM Bug report #20136 (Closed): Requesting a feature by its feature id not working with filtered gpkg
Applied in changeset commit:qgis|391ec8a5dd4508f75b6538ab7be309379695add4. Even Rouault
09:56 AM Bug report #19911: The vertex editor is not synchronized with vertex movements in edit mode
PR submitted https://github.com/qgis/QGIS/pull/8032
I'm affecting Loïc, but Denis, I you are on it also, feel free ...
Regis Haubourg
09:52 AM Feature request #20166 (Feedback): support serving projects stored in postgresql
now that QGIS can save projects in postgresql, QGIS Server should support serving them as WMS/WFS etc. Sebastian Brocks
09:47 AM Bug report #20165 (Open): project selection combobox initially empty when trying to open project ...
When I want to open a project from PostgreSQL, the project dropdown box is initially empty. I need to switch the tabl... Sebastian Brocks

2018-10-18

01:47 AM Bug report #20164 (Closed): Layouts: Scale-based Rendering error
Hey everyone,
Forgive me if this post is incorrectly issued, or if it is lacking information. This is my first tim...
Jack Charde
10:55 PM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
Saber Razmjooei wrote:
> Already implemented.
> Selected the features and from the Processing Toolbox, click on Edi...
Antonio Viscomi
10:16 PM Bug report #20162 (Closed): Please provide an Edition tool able to split multipart in single parts
Already implemented.
Selected the features and from the Processing Toolbox, click on Edit Features in Place. Then yo...
Saber Razmjooei
09:12 PM Bug report #20162: Please provide an Edition tool able to split multipart in single parts
Sorry this is a feature request not a bug Antonio Viscomi
09:09 PM Bug report #20162 (Closed): Please provide an Edition tool able to split multipart in single parts
Hi all,
In Qgis 2 there is a useful plugin (multipart split) created by Alexandre Neto that allow user to split sel...
Antonio Viscomi
10:52 PM Bug report #20073: Form validation doesn't take care of 2 columns primary key
Yes, I can confirm what Mathieu said. The primary key is done for each column, individually, not checking all columns... Etienne Trimaille
01:59 PM Bug report #20073: Form validation doesn't take care of 2 columns primary key
Hi Etienne and Nyall,
same problem here with a 3 columns primary keys (QGIS 3.2 on ubuntu 18.04).
And I think I u...
Mathieu Bossaert
10:01 PM Feature request #20163: [3d] Support for expression/field to set width and height for lines
Also to add to the list: Extrusion! Saber Razmjooei
10:00 PM Feature request #20163 (Open): [3d] Support for expression/field to set width and height for lines
In QGIS 3.3 it is possible to add width and height for lines in 3D map scenes. But currently only single value input ... Saber Razmjooei
08:43 PM Bug report #20161 (Closed): Crash after loading several spatial tables from Esri File GDB 10.6.0 ...
h2. User Feedback
Importing features to PostGIS from Esri File GDB 10.6.0 using DB Manager
h2. Report Details
...
BrianBoru Quinn
08:19 PM Bug report #20094: Extracting z-coordinates takes ages and makes the system unresponsive
It works with qgis 3.3.0-Master in Ubuntu 18.10 Cosmic Cuttlefish, the attribute editor opens somewhat slower than in... Karl Kastner
09:56 AM Bug report #20094: Extracting z-coordinates takes ages and makes the system unresponsive
I've just merged a new PR that address this issue (and others) in a different way, please test the current master and... Alessandro Pasotti
07:10 PM Bug report #20160 (Closed): GRASS Tool "r.stats.quantile.out" Getting Conflicting Parameters
In QGIS 3.2.3 (and 3.2.2) and GRASS 7.2.2, the r.stats.quantile.out tool under GRASS Raster tools errors out. Here's ... Todd Jamison
06:45 PM Bug report #20138: "Show selected features" attribute table behavior doesn't work
Giovanni Manghi wrote:
> Matthew Jurewicz wrote:
> > The issue doesn't seem to be fixed in the latest nightly dev b...
Matthew Jurewicz
01:56 PM Bug report #20138: "Show selected features" attribute table behavior doesn't work
Matthew Jurewicz wrote:
> The issue doesn't seem to be fixed in the latest nightly dev build
it works fine here, ...
Giovanni Manghi
05:50 PM Bug report #20101: [Processing] "Buffer" is not listed as an edit in place algorithm for polygon ...
PR https://github.com/qgis/QGIS/pull/8231 Alessandro Pasotti
05:41 PM Bug report #20101 (In Progress): [Processing] "Buffer" is not listed as an edit in place algorith...
Alessandro Pasotti
05:41 PM Bug report #20101: [Processing] "Buffer" is not listed as an edit in place algorithm for polygon ...
Nevermind, I've found a solution. Alessandro Pasotti
11:32 AM Bug report #20101 (Feedback): [Processing] "Buffer" is not listed as an edit in place algorithm f...
Wait, the dissolve option is a showstopper: there is no way to maintain it with a feature based algorithm, need to ch... Alessandro Pasotti
10:27 AM Bug report #20101: [Processing] "Buffer" is not listed as an edit in place algorithm for polygon ...
Let's see if we can sneak this into 3.4 ... Alessandro Pasotti
05:49 PM Bug report #20147 (In Progress): [edit-in-place] - difference deletes invalid geometries
PR https://github.com/qgis/QGIS/pull/8231 Alessandro Pasotti
05:49 PM Bug report #20147 (In Progress): [edit-in-place] - difference deletes invalid geometries
PR https://github.com/qgis/QGIS/pull/8231 Alessandro Pasotti
09:28 AM Bug report #20147: [edit-in-place] - difference deletes invalid geometries
Jan Lippmann wrote:
> the difference alg. deletes selected invalid geometries and the alg do not respect "modify sel...
Jan Lippmann
05:36 PM Feature request #20159 (Closed): Singlepart to Multipart
is called "promote to multipart" Giovanni Manghi
05:36 PM Feature request #20159 (Closed): Singlepart to Multipart
is called "promote to multipart" Giovanni Manghi
05:20 PM Feature request #20159 (Feedback): Singlepart to Multipart
It's there; it has been renamed into "Collect geometries" (or "Promote to multipart" ? I'm never sure). Harrissou Santanna
04:11 PM Feature request #20159 (Closed): Singlepart to Multipart
In QGIS 2.18 not only the Tool Multipart to Singlepart but also the tool Singlepart to Multipart were available. Unfo... Sara Lena Kordasch
03:30 PM Bug report #19517: Serious problem with rasters statistics calculated by QGIS with estimated option
Pull request pending https://github.com/qgis/QGIS/pull/8230 Matthias Kuhn
02:46 PM Bug report #19517: Serious problem with rasters statistics calculated by QGIS with estimated option
It looks like GDAL writes this file when GDALClose is called.
I am considering to delete it right after if two condi...
Matthias Kuhn
02:46 PM Bug report #19517: Serious problem with rasters statistics calculated by QGIS with estimated option
It looks like GDAL writes this file when GDALClose is called.
I am considering to delete it right after if two condi...
Matthias Kuhn
03:08 PM Bug report #20158 (Closed): Moving segments after range selection of vertices destroys topology
When using the vertex range selection, in order to select several segments which are supposed to be moved, the operat... Andreas Wicht
03:07 PM Bug report #20150: MeasurementTool stays active (or at least isn't removed) after changing Tool
No, it is not a regression for what I know, because it also happens in a QGIS 2.18.24 that I have here.
So apparen...
Richard Duivenvoorde
02:02 PM Bug report #20150 (Feedback): MeasurementTool stays active (or at least isn't removed) after chan...
Giovanni Manghi
02:02 PM Bug report #20150: MeasurementTool stays active (or at least isn't removed) after changing Tool
isn't this a regression? Giovanni Manghi
11:29 AM Bug report #20150 (Closed): MeasurementTool stays active (or at least isn't removed) after changi...
See screenshot rulerPanToolActive.png while the pantool is active, the lines drawn by the measurementtool are still v... Richard Duivenvoorde
03:05 PM Bug report #20157 (Feedback): Qgis freezes when opening Postgresql connection
No problems here (on Linux) on both 2.18 and 3.3 with remote PostGIS connections.
Can you try if using 3.3 makes any...
Giovanni Manghi
03:05 PM Bug report #20157 (Feedback): Qgis freezes when opening Postgresql connection
No problems here (on Linux) on both 2.18 and 3.3 with remote PostGIS connections.
Can you try if using 3.3 makes any...
Giovanni Manghi
02:18 PM Bug report #20157 (Closed): Qgis freezes when opening Postgresql connection
I have created a connection to a remote Postgresql within a qgis project.
First time it worked fine.
When I reope...
Clara Tattoni
02:59 PM Bug report #20154: Broken clustering method selection in GRASS v.cluster processing algorithm
https://github.com/qgis/QGIS/pull/8227 Giovanni Manghi
01:30 PM Bug report #20154 (Closed): Broken clustering method selection in GRASS v.cluster processing algo...
In processing window of _v.cluster_ GRASS algorithm there is no option to choose single clustering method. The menu s... Oto Kalab
02:43 PM Bug report #20151 (Feedback): Qgis fails at rendering some features in different extents and OTF ...
Just tried on qgis master on linux using the above projections: no issues here. Giovanni Manghi
02:43 PM Bug report #20151 (Feedback): Qgis fails at rendering some features in different extents and OTF ...
Just tried on qgis master on linux using the above projections: no issues here. Giovanni Manghi
02:43 PM Bug report #20151 (Feedback): Qgis fails at rendering some features in different extents and OTF ...
Just tried on qgis master on linux using the above projections: no issues here. Giovanni Manghi
11:34 AM Bug report #20151 (Closed): Qgis fails at rendering some features in different extents and OTF pr...
I'm using GADM countries dataset (https://gadm.org/) and global ~10km raster aiming to produce a global map.
Tryi...
Dor Fridman
02:38 PM Bug report #20146: QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output.
yeah... there are a bunch of GRASS tools that can output multiple rasters... so the solution in Processing is to make... Giovanni Manghi
02:28 PM Bug report #20146: QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output.
it worked here (with a random raster): the output (the tool ask for a folder path) must be specified, then inside the... Giovanni Manghi
02:18 PM Bug report #20146 (Feedback): QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output.
Can you provide some sample data we can use with this tool? Giovanni Manghi
02:15 PM Bug report #20155: crash loading style from postgres db when there is no "layer_styles" table in ...
load from style file is not correct! only click on "Load Style..." button in the layer properties...then qgis crash Jan Lippmann
01:40 PM Bug report #20155 (Closed): crash loading style from postgres db when there is no "layer_styles" ...
h2. User Feedback
click "load style from qml file" for geometryless layer (in my case a postgres table)...qgis cra...
Jan Lippmann
02:12 PM Bug report #18465 (Open): 'Load' button in Layer Properties > Style > Min/max settings has disapp...
it misses indeed. Giovanni Manghi
02:12 PM Bug report #18465 (Open): 'Load' button in Layer Properties > Style > Min/max settings has disapp...
it misses indeed. Giovanni Manghi
02:12 PM Bug report #18465 (Open): 'Load' button in Layer Properties > Style > Min/max settings has disapp...
it misses indeed. Giovanni Manghi
10:58 AM Bug report #18465: 'Load' button in Layer Properties > Style > Min/max settings has disappeared
Alessandro Pasotti wrote:
> I belive this was fixed long ago, can you please test latest nightlies and confirm?
I...
Dor Fridman
02:08 PM Bug report #9954 (Closed): QGIS Server print the wrong table if a geometryless is added to the la...
If it works on master I think we can close this. Giovanni Manghi
02:08 PM Bug report #9954 (Closed): QGIS Server print the wrong table if a geometryless is added to the la...
If it works on master I think we can close this. Giovanni Manghi
02:08 PM Bug report #9954 (Closed): QGIS Server print the wrong table if a geometryless is added to the la...
If it works on master I think we can close this. Giovanni Manghi
11:41 AM Bug report #9954 (Feedback): QGIS Server print the wrong table if a geometryless is added to the ...
It seems to work fine on current Master (3.X).
@Giovanni Manghi, did you test it on 2.18 lately?
Paul Blottiere
11:41 AM Bug report #9954 (Feedback): QGIS Server print the wrong table if a geometryless is added to the ...
It seems to work fine on current Master (3.X).
@Giovanni Manghi, did you test it on 2.18 lately?
Paul Blottiere
02:06 PM Bug report #20156 (Open): QgsVectorFileWriter creates new fields with field type Integer64 instea...
The data type of the third argument of QgsVectorFileWriter is QgsFields [1], a container of fields. Suppose an entry ... Evangelos Rozos
02:00 PM Bug report #19868: copy/paste style doesn't works
my full log attached
Regis Haubourg
10:18 AM Bug report #19868: copy/paste style doesn't works
Hi,
I am using nighlty builds for ubuntu / ubuntuGIS.
It seems to be built with debug options yes.
Grepping ...
Regis Haubourg
01:58 PM Bug report #20135 (Open): Development version QGIS-server crashes on Win10
Giovanni Manghi
11:14 AM Bug report #20135: Development version QGIS-server crashes on Win10
That's what I thought, so I rremoved QGis 2.18 from my machine. Problem still exists.
After complete removal of QGis...
Koen Volleberg
01:55 PM Bug report #20133 (Open): map composer scale error
Giovanni Manghi
09:26 AM Bug report #20133: map composer scale error
I'm sorry it's the same.
Look at pictures linked (done with v3.3): scale bar locked at its left on 0 (line color bla...
Loïc Bouffard
09:26 AM Bug report #20133: map composer scale error
I'm sorry it's the same.
Look at pictures linked (done with v3.3): scale bar locked at its left on 0 (line color bla...
Loïc Bouffard
01:54 PM Bug report #20112 (Closed): error loading QGIS (3.2 and 3.3 nightly)
I think that now the installer works as expected, please reopen if necessary. Giovanni Manghi
01:54 PM Bug report #20112 (Closed): error loading QGIS (3.2 and 3.3 nightly)
I think that now the installer works as expected, please reopen if necessary. Giovanni Manghi
01:19 PM Bug report #20153 (Closed): Edit form: Hint value is set as default value during editing
the Fomr hint is set as default value stargin editing
betetr a video than words (attached)
I think it's a regression
Luigi Pirelli
01:10 PM Bug report #20152 (Open): WCS client issues
The following public wcs services:
https://geodata.nationaalgeoregister.nl/ahn2/wcs?
https://geodata.nationaalg...
Richard Duivenvoorde
11:12 AM Bug report #20149 (Open): Postgis provider dialog does not show empty schema's
After creating a fresh schema, this cannot be viewed in the browser or postgis connection dialog.
(not even when you...
Richard Duivenvoorde
11:04 AM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile
I also tried to compile https://github.com/qgis/QGIS/archive/final-2_18_19.tar.gz on Debian Stretch and I didn't have... Paul Blottiere
11:04 AM Bug report #20148 (Open): WFS layers read in QGIS 2.18 cannot be read in QGIS 3
WFS layers easily read in Qgis 2.18 can only be read in QGIS 3 if I manually specify the correct WFS version when add... magerlin -
07:28 AM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
Here is the original ticket #13668 Saber Razmjooei
07:25 AM Bug report #15105 (Closed): Problem with handling Plugin layers style
Saber Razmjooei
07:23 AM Feature request #15497 (Closed): Using Trace status (on/off) in the status bar
The magnet is good enough! Saber Razmjooei

2018-10-17

01:17 AM Bug report #20136 (In Progress): Requesting a feature by its feature id not working with filtered...
https://github.com/qgis/QGIS/pull/8216 Even Rouault
05:19 PM Bug report #20136: Requesting a feature by its feature id not working with filtered gpkg
The filter was set to a simple `1 = 1`, so it shouldn't filter out anything Matthias Kuhn
04:16 PM Bug report #20136 (Closed): Requesting a feature by its feature id not working with filtered gpkg
In the attached dataset, T_Id is a stable primary key, recognized by OGR (ogrinfo says "FID Column = T_Id" and in som... Matthias Kuhn
11:59 PM Bug report #20147 (Closed): [edit-in-place] - difference deletes invalid geometries
the difference alg. deletes selected invalid geometries and the alg do not respect "modify selected features"
opti...
Jan Lippmann
11:08 PM Bug report #17899: Shape to Geopackage: Creation of field fid failed (OGR error: Wrong field type...
I ran into a similar problem w/ FIDs while exporting to geopackage. A line shapefile w/ multiple part features was ex... Mike Bannister
10:08 PM Bug report #20146 (Closed): QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output.
QGIS 3.2.3 Bonn and GRASS 7. r.texture does not provide any output. Not in temp folders, not in user defined folders.... Odysseas Vl
09:42 PM Bug report #20133 (Feedback): map composer scale error
Please test with 3.3 Nyall Dawson
03:18 PM Bug report #20133 (Closed): map composer scale error
hi,
I met a problem of precision of my map composer's scale on different version. Always not solve on v3.2.
After m...
Loïc Bouffard
09:42 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
I mark this a bug, because in QGIS 2.18 it was possible to remove a vertex from panel. Saber Razmjooei
09:42 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
I mark this a bug, because in QGIS 2.18 it was possible to remove a vertex from panel. Saber Razmjooei
09:42 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
I mark this a bug, because in QGIS 2.18 it was possible to remove a vertex from panel. Saber Razmjooei
09:42 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
I mark this a bug, because in QGIS 2.18 it was possible to remove a vertex from panel. Saber Razmjooei
09:42 PM Bug report #20139: Please make vertex panel to be able to delete a vertex in QGIS 3
I mark this a bug, because in QGIS 2.18 it was possible to remove a vertex from panel. Saber Razmjooei
05:21 PM Bug report #20139 (Closed): Please make vertex panel to be able to delete a vertex in QGIS 3
Hi all,
Using the new vertex editor I often find it difficult to locate the vertex
in map canvas.
So I think ...
Antonio Viscomi
09:39 PM Bug report #20145 (Open): [mdal][gui] Remove unused buttons for displaying contours and vectors
Can we get rid of Show contours and Show vectors under Properties? If we go with #20144 these are not needed, as they... Saber Razmjooei
09:22 PM Bug report #20138: "Show selected features" attribute table behavior doesn't work
Shift + F6 is a good work-around. The issue doesn't seem to be fixed in the latest nightly dev build. Please read des... Matthew Jurewicz
05:39 PM Bug report #20138: "Show selected features" attribute table behavior doesn't work
I also noticed this before earlier on, then I was recommended to use Shift + F6, which worked like expected. Jeffrey Bostoen
05:23 PM Bug report #20138: "Show selected features" attribute table behavior doesn't work
I can confirm: on master it works just fine, can you please test the latest builds? Alessandro Pasotti
05:21 PM Bug report #20138 (Feedback): "Show selected features" attribute table behavior doesn't work
works as expected here on qgis/master on linux. Giovanni Manghi
05:18 PM Bug report #20138 (Closed): "Show selected features" attribute table behavior doesn't work
Settings > Options > "Data Sources" > "Attribute table behavior" > "Show selected features" does not affect map layer... Matthew Jurewicz
09:20 PM Bug report #20144 (Open): [mdal][gui] Usability issue with activating/deactivating quantities
Currently the General tab under Mesh layer looks like Figure 1. This is not a common way of turning layers on/off und... Saber Razmjooei
08:26 PM Feature request #20143 (Closed): No mesh layer entry in layer menu
From the main menu, Layer> Add Layer >
and there is no Mdal layer.
Saber Razmjooei
06:52 PM Bug report #20142 (Closed): Numeric calculation in "Merge selected features" dialog does not work
Select two features and click on "merge selected features" button
In the new dialog, for a numeric field try to use ...
Harrissou Santanna
06:45 PM Feature request #20141: Manually curve and otherwise place and manipulate individual labels (aka ...
I don't know about "manually curving" but you can place and manipulate individual labels in QGIS (for a long time now... Harrissou Santanna
06:23 PM Feature request #20141 (Open): Manually curve and otherwise place and manipulate individual label...
Create the ability to manually curve and otherwise place and manipulate individual labels (aka "annotation" in Esri-s... atanas entchev
06:19 PM Bug report #20140 (Closed): QgsExternalResourceWidgetWrapper crashes
QGIS crashes when using a QgsExternalResourceWidget in the Attribute TableView to edit the String Field value of a Qg... Benjamin Jakimow
05:34 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
Rob Willson wrote:
> just now (2018-10-15 15:27 EST) I was able to update again through osgeo4w-setup-x86_64. I was ...
Antonio Viscomi
05:24 PM Bug report #20008 (Closed): Very Slow Table Operations while the Table is Open
Giovanni Manghi
05:23 PM Bug report #20135 (Feedback): Development version QGIS-server crashes on Win10
Not sure if it still works as 2.*, but if is the case I remember that installing both qgis server master and 2.* on W... Giovanni Manghi
03:39 PM Bug report #20135 (Open): Development version QGIS-server crashes on Win10
Hi all,
I wanted to do a test-drive of the 3.3 development version of QGIS-server on my Win10 laptop.
The 3.2 relea...
Koen Volleberg
05:14 PM Bug report #20137 (Closed): Topological editing don't works as expected in QGIS Master
#18046 Giovanni Manghi
05:14 PM Bug report #20137 (Closed): Topological editing don't works as expected in QGIS Master
#18046 Giovanni Manghi
04:52 PM Bug report #20137 (Closed): Topological editing don't works as expected in QGIS Master
Hi all,
in QGIS 3.2.3 as in MASTER (9cae77f262)
I need to edit a polygon shapefile with topological editing acti...
Antonio Viscomi
03:34 PM Bug report #20134 (Closed): crash when trying to set exluded layer in QGIS Server WMS capabilities
h2. User Feedback
When I try to exlude a layer from the WMS capabilities, QGIS crashes. The list that appears in a...
Sebastian Brocks
02:56 PM Bug report #19653 (Closed): Snapping Toolbar missing from View > Toolbars menu
Duplicate #18499
Fixed in master (3.4) https://github.com/qgis/QGIS/pull/7940/files
Loïc BARTOLETTI
02:56 PM Bug report #19653 (Closed): Snapping Toolbar missing from View > Toolbars menu
Duplicate #18499
Fixed in master (3.4) https://github.com/qgis/QGIS/pull/7940/files
Loïc BARTOLETTI
01:48 PM Bug report #20127: [Processing] Esri shapefile format is listed twice in file selector dialog whe...
Actually it's the vector file selector itself that has the bug. Trying to add file from the data source manager > vec... Harrissou Santanna
09:11 AM Bug report #20127 (Open): [Processing] Esri shapefile format is listed twice in file selector dia...
Open an algorithm dialog
switch to batch mode
click the browser icon for input layer
in the select file dialog, th...
Harrissou Santanna
01:28 PM Bug report #20132 (Feedback): Vector toolbar contains no tools
Hi,
As it has been replied in the user ML, by default, the vector toolbar in QGIS has no tool unless you enable plug...
Harrissou Santanna
12:48 PM Bug report #20132 (Closed): Vector toolbar contains no tools
The vector toolbar has no tools. In in Interface Customisation panel the vector toolbar has no triangle next to it to... Andrew Grant-Adamson
01:25 PM Bug report #20101: [Processing] "Buffer" is not listed as an edit in place algorithm for polygon ...
This is not a bug but a feature request: native:buffer algorithm do not inherit from QgsProcessingFeatureBasedAlgorit... Alessandro Pasotti
12:27 PM Bug report #19910: Marker opacity is not working on a Marker Lines
Still valid on QGIS 3.3 (a0d46d12c1). Alexandre Neto
12:27 PM Bug report #19910: Marker opacity is not working on a Marker Lines
Still valid on QGIS 3.3 (a0d46d12c1). Alexandre Neto
12:27 PM Bug report #19910: Marker opacity is not working on a Marker Lines
Still valid on QGIS 3.3 (a0d46d12c1). Alexandre Neto
11:59 AM Bug report #20131 (Closed): [3d] Navigation in 3d map and locked left click
It happens a lot of times, when panning (using left-click and drag) the map gets stuck and panning does not work any ... Saber Razmjooei
11:58 AM Bug report #20074 (Feedback): Blank canvas after applying filter/query builder
Giovanni Manghi
10:41 AM Bug report #20074: Blank canvas after applying filter/query builder
Can you check again with the most recent master? The fix from Even for OSM file two days ago may have fixed it (#20098) Martin Dobias
11:40 AM Feature request #20102 (Feedback): Pre-render canvas outside of visible area
"Prerender some buffer area outside of canvas to make scrolling smoother"
We already do it (turned on by default b...
Martin Dobias
10:47 AM Feature request #20130 (Closed): Identify tool does not work on mesh layer
In the crayfish plugin 2 the elevation of the mesh at the current cursor position (hover over) was shown in the crayf... Michel Kuhlmann
10:47 AM Bug report #20109: Editing Oracle Spatial view in QGIS
Ok I've continued my tests. The issue always occurs when I have an "instead of" trigger on my view even if it's a one... Maxime Resibois
10:08 AM Bug report #20129 (Closed): Map window smaller than application window
#19524 Giovanni Manghi
10:08 AM Bug report #20129 (Closed): Map window smaller than application window
#19524 Giovanni Manghi
10:05 AM Bug report #20129 (Closed): Map window smaller than application window
Map window don't follow application window. I attach an picture.
Thanks
Stefano
Stefano Guerrini
10:03 AM Bug report #20126 (Feedback): Importing Excel *.xlsm files as well
does OGR (try ogrinfo) recognize such format? Giovanni Manghi
08:51 AM Bug report #20126 (Closed): Importing Excel *.xlsm files as well
* QGIS can recognize *.xlsx files by dragging and dropping however it doesn't recognize *.xlsm (Macro Enabled) files ... Haitham Shatti
09:23 AM Feature request #20128 (Open): [Processing]Last used format is not proposed by default in file se...
Open an algorithm dialog
switch to batch mode
click the browser icon for input layer
in the select file dialog, br...
Harrissou Santanna

2018-10-16

07:11 PM Bug report #19383 (Closed): QGIS Server WMS GetFeatureInfo requests parameter TOLERANCE=0 not wor...
Applied in changeset commit:qgis|2c5d1c548b95345290deaf02ef64925d7834da0c. Paul Blottiere
07:11 PM Bug report #19383 (Closed): QGIS Server WMS GetFeatureInfo requests parameter TOLERANCE=0 not wor...
Applied in changeset commit:qgis|2c5d1c548b95345290deaf02ef64925d7834da0c. Paul Blottiere
07:10 PM Bug report #20064 (Closed): QGIS Server WFS Update Transaction bug
Applied in changeset commit:qgis|fff0c0309994a1da1d381108819054f3eb6dfefa. René-Luc ReLuc
07:10 PM Bug report #20064 (Closed): QGIS Server WFS Update Transaction bug
Applied in changeset commit:qgis|fff0c0309994a1da1d381108819054f3eb6dfefa. René-Luc ReLuc
06:16 PM Bug report #20124 (Rejected): [mdal] Refreshing the canvas does not reload the mesh
To reproduce:
1- Load a mesh layer
2- then outside QGIS, make some changes to the mesh
3- Press F5 (or Refresh the...
Saber Razmjooei
05:23 PM Bug report #20109: Editing Oracle Spatial view in QGIS
A small precision : this issue occurs only with multi-table view. With a view that is a mirror of an unique table the... Maxime Resibois
02:15 PM Bug report #20109 (Open): Editing Oracle Spatial view in QGIS
Giovanni Manghi
11:45 AM Bug report #20109: Editing Oracle Spatial view in QGIS
Yes it works the same way in QGIS 3.2 and 3.3 nightly Maxime Resibois
04:37 PM Bug report #20123 (Open): Import to MS SQL failed due to international characters
When I load the attached layer to QGIS (dbf encoding is UTF-8), I am unable to import the data to MS SQL through the ... Martin Dobias
04:36 PM Bug report #19700: No output from grass toolbox function
Nyall Dawson wrote:
> Is this fixed now?
Oops. I've been a bit busy lately, I didn't had time to have a look. Mig...
vince -
04:32 PM Bug report #20122 (Closed): Import of a layer to MS SQL fails
When I try to import the attached shapefile with one feature to MS SQL server through the browser dock, it says the i... Martin Dobias
03:18 PM Bug report #20067 (Closed): Duplicate feature action fails with PostgreSQL error message
Applied in changeset commit:qgis|d26848e97746ccab3a8ac5c0a9cc56db63e34501. David Signer
03:18 PM Bug report #20067 (Closed): Duplicate feature action fails with PostgreSQL error message
Applied in changeset commit:qgis|d26848e97746ccab3a8ac5c0a9cc56db63e34501. David Signer
03:02 PM Bug report #18628 (Feedback): QGIS 3: vertex editor highlights features in non-visible layers
Carolyn Krause wrote:
> This issue is still occurring in QGIS 3.0.3.
I tested on master, and despite having snapp...
Giovanni Manghi
03:02 PM Bug report #18628 (Feedback): QGIS 3: vertex editor highlights features in non-visible layers
Carolyn Krause wrote:
> This issue is still occurring in QGIS 3.0.3.
I tested on master, and despite having snapp...
Giovanni Manghi
10:22 AM Bug report #18628: QGIS 3: vertex editor highlights features in non-visible layers
I had the same problem and noticed that 'Enable snapping by default' was ticked on under the 'Digitizing' options. Un... Chris Buckmaster
02:48 PM Bug report #20008: Very Slow Table Operations while the Table is Open
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > This slowness is also present in QGIS 2.18
> > and also occur...
Antonio Viscomi
02:09 PM Bug report #20008 (Feedback): Very Slow Table Operations while the Table is Open
Antonio Viscomi wrote:
> This slowness is also present in QGIS 2.18
> and also occurs with fewer features in shape...
Giovanni Manghi
12:47 PM Bug report #20008: Very Slow Table Operations while the Table is Open
This slowness is also present in QGIS 2.18
and also occurs with fewer features in shapefiles (15000-16000 are enoug...
Antonio Viscomi
01:05 PM Bug report #16226: Map Settings variables are not updating
This issue is still present in 3.3.
The map settings variables on the map item properties dialog are not updated w...
Alexandre Neto
01:05 PM Bug report #16226: Map Settings variables are not updating
This issue is still present in 3.3.
The map settings variables on the map item properties dialog are not updated w...
Alexandre Neto
11:47 AM Bug report #20121 (Open): Inconsistent placement of Cancel button in Load Style window
When loading style, the new window has two options: Cancel and Load Style
Almost everywhere in QGIS, Cancel is the m...
Saber Razmjooei
11:44 AM Bug report #20120 (Open): Remembering the last folder when loading style
I have all my qml files in a folder and when trying to apply style from file in the new window, it will always point ... Saber Razmjooei
10:55 AM Feature request #20119 (Open): Support for MySQL 8
When upgrading the MySQL databases to MySQL 8 we are experiencing some issues:
- Upon opening a table through the ...
Hans Johansen
09:44 AM Bug report #20118: 3d map in print composer with 3d lines
https://www.dropbox.com/s/32pl9l3s8mlag4e/bug_3d_lines.zip?dl=0 Saber Razmjooei
09:43 AM Bug report #20118 (Closed): 3d map in print composer with 3d lines
I am trying to print a 3d map which is created with 3d lines. The lines are all over the place.
The link to projec...
Saber Razmjooei
08:06 AM Feature request #20117 (Open): Saving edits as background task
When making major changes to layer, trying to save the layer may take several minutes.
It will be good to have the...
Saber Razmjooei

2018-10-15

11:13 PM Bug report #19099: Data defined Size legend is wrong when using separated symbols
@gioman, can we consider this a regression. I mean, this used to work just fine before this several options to repres... Alexandre Neto
10:35 PM Bug report #20116 (Feedback): can not reduce the size of the data entry form
Drag and drop designer? Custom ui with QT designer? Giovanni Manghi
10:35 PM Bug report #20116 (Feedback): can not reduce the size of the data entry form
Drag and drop designer? Custom ui with QT designer? Giovanni Manghi
08:54 PM Bug report #20116 (Closed): can not reduce the size of the data entry form
Hi everyone.
I created a data entry form. However, the size of the mask is too large. If I move the mouse cursor to ...
Roberto Montagnetti
10:34 PM Bug report #20115 (Feedback): the vertex tool does not work
Works fine here on QGIS master. A screenshot of your snapping options and a screencast that shows how are you using t... Giovanni Manghi
10:34 PM Bug report #20115 (Feedback): the vertex tool does not work
Works fine here on QGIS master. A screenshot of your snapping options and a screencast that shows how are you using t... Giovanni Manghi
08:48 PM Bug report #20115 (Closed): the vertex tool does not work
Hi everybody,
topological modification using the vertices tool does not work.
If I select the vertex that I want to...
Roberto Montagnetti
10:30 PM Bug report #20114: [processing] no cell size option for IDW interpolation alg
Saber Razmjooei wrote:
> Hi Gio, they are two different algs. But I agree they are similar issues. As long as there ...
Giovanni Manghi
10:29 PM Bug report #20114: [processing] no cell size option for IDW interpolation alg
Hi Gio, they are two different algs. But I agree they are similar issues. As long as there is a note for devs not to ... Saber Razmjooei
10:20 PM Bug report #20114 (Feedback): [processing] no cell size option for IDW interpolation alg
"Duplicate" of #19701 ?
Both tools are almost unusable without a parameter for output resolution (pixel size).
Giovanni Manghi
08:01 PM Bug report #20114 (Closed): [processing] no cell size option for IDW interpolation alg
Not sure if it is a feature request or a bug!
In QGIS 2.18 interpolation plugin, user can set either the cell size...
Saber Razmjooei
10:23 PM Bug report #20113 (Closed): Label tools not working on rule based labelling
Already fixed for V3.4 Nyall Dawson
10:23 PM Bug report #20113 (Closed): Label tools not working on rule based labelling
Already fixed for V3.4 Nyall Dawson
10:08 PM Bug report #20113 (Feedback): Label tools not working on rule based labelling
Does it works as expected on 2.18? Giovanni Manghi
10:08 PM Bug report #20113 (Feedback): Label tools not working on rule based labelling
Does it works as expected on 2.18? Giovanni Manghi
05:38 PM Bug report #20113 (Closed): Label tools not working on rule based labelling
If rule bases labelling ist turned on, Label tools are not working on attributes stored in the Layers feature table e... Johannes Metzler
10:22 PM Bug report #20111: Crasing on opening a .bak project from AutoSave plugin
Isn't this a plugin issue? Nyall Dawson
10:05 PM Bug report #20111 (Feedback): Crasing on opening a .bak project from AutoSave plugin
Giovanni Manghi
10:04 PM Bug report #20111: Crasing on opening a .bak project from AutoSave plugin
Steps to replicate? Giovanni Manghi
10:04 PM Bug report #20111: Crasing on opening a .bak project from AutoSave plugin
Steps to replicate? Giovanni Manghi
10:04 PM Bug report #20111: Crasing on opening a .bak project from AutoSave plugin
Steps to replicate? Giovanni Manghi
10:04 PM Bug report #20111: Crasing on opening a .bak project from AutoSave plugin
Steps to replicate? Giovanni Manghi
03:37 PM Bug report #20111 (Closed): Crasing on opening a .bak project from AutoSave plugin
h2. User Feedback
h2. Report Details
*Crash ID*: ddfe7c264a7641a1e1676a7e5128f1d4002f56b7
*Stack Trace...
Roberto Lopez
10:17 PM Bug report #18943 (Feedback): QGIS Server on MacOS X High Sierra
Giovanni Manghi
07:30 PM Bug report #18943: QGIS Server on MacOS X High Sierra
apparently mac ports has issues with mod_fcgi. Is this the way you installed QGIS?
see https://stackoverflow.com/que...
Denis Rouzaud
10:17 PM Bug report #20112 (Feedback): error loading QGIS (3.2 and 3.3 nightly)
Seen this today too. This should be closed and reported in the osgeo4w bug tracker, I think. Giovanni Manghi
10:17 PM Bug report #20112 (Feedback): error loading QGIS (3.2 and 3.3 nightly)
Seen this today too. This should be closed and reported in the osgeo4w bug tracker, I think. Giovanni Manghi
10:17 PM Bug report #20112 (Feedback): error loading QGIS (3.2 and 3.3 nightly)
Seen this today too. This should be closed and reported in the osgeo4w bug tracker, I think. Giovanni Manghi
10:17 PM Bug report #20112 (Feedback): error loading QGIS (3.2 and 3.3 nightly)
Seen this today too. This should be closed and reported in the osgeo4w bug tracker, I think. Giovanni Manghi
09:30 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
just now (2018-10-15 15:27 EST) I was able to update again through osgeo4w-setup-x86_64. I was able to screen capture... Rob Willson
09:30 PM Bug report #20112: error loading QGIS (3.2 and 3.3 nightly)
just now (2018-10-15 15:27 EST) I was able to update again through osgeo4w-setup-x86_64. I was able to screen capture... Rob Willson
05:33 PM Bug report #20112 (Closed): error loading QGIS (3.2 and 3.3 nightly)
after running OSGeo set up this morning to update to the latest nightly build there was an error message generated du... Rob Willson
10:15 PM Bug report #20109 (Feedback): Editing Oracle Spatial view in QGIS
Does it works the same way in QGIS 3.2/3.3? Giovanni Manghi
10:15 PM Bug report #20109 (Feedback): Editing Oracle Spatial view in QGIS
Does it works the same way in QGIS 3.2/3.3? Giovanni Manghi
11:30 AM Bug report #20109 (Closed): Editing Oracle Spatial view in QGIS
I try with QGIS to insert new features in a multi-table Oracle Spatial view that is updatable by adding an "instead o... Maxime Resibois
08:32 PM Feature request #19571 (Closed): Add support to read WFS GML data containing geometry collections
Applied in changeset commit:qgis|9014285bc7bbf1c4ac98f30243bc1e88ff7ce9fd. Even Rouault
08:32 PM Feature request #19571 (Closed): Add support to read WFS GML data containing geometry collections
Applied in changeset commit:qgis|9014285bc7bbf1c4ac98f30243bc1e88ff7ce9fd. Even Rouault
08:05 PM Bug report #19092 (Closed): Measure tool on a Mac uses the top right corner of the cross hair cur...
Applied in changeset commit:qgis|4cc4bab969772fc6508979166e5ab08afd0437f8. Denis Rouzaud
08:05 PM Bug report #19092 (Closed): Measure tool on a Mac uses the top right corner of the cross hair cur...
Applied in changeset commit:qgis|4cc4bab969772fc6508979166e5ab08afd0437f8. Denis Rouzaud
07:59 PM Bug report #18418 (Closed): Scroll zoom erratic on Mac trackpad
Applied in changeset commit:qgis|6396571d565cb77d1e99ab160b474040bc61c56d. Denis Rouzaud
07:59 PM Bug report #18418 (Closed): Scroll zoom erratic on Mac trackpad
Applied in changeset commit:qgis|6396571d565cb77d1e99ab160b474040bc61c56d. Denis Rouzaud
04:07 PM Bug report #4520 (Closed): QGIS mapserver: Spaces in GetFeatureInfo filter string values are reje...
Paul Blottiere
04:06 PM Bug report #4520: QGIS mapserver: Spaces in GetFeatureInfo filter string values are rejected
A unit test is now included in QGIS 2.18 and Master for this use case:... Paul Blottiere
02:00 PM Bug report #20110 (Open): Bug with Drag and Drop Designer on QGIS 3.2
Hello,
The Drag and Drop Designer to create forms on QGIS 3.2.3 (Unbuntu Xenial) does not accept to drop items fro...
didier peeters
11:52 AM Bug report #20092: GeoPackage SQL issues in DB Manager
Here is a clarification about DB Manager:
These queries fail in the "GeoPackage" section. But it works in the "Virtu...
Antoine Fonoxo
11:09 AM Bug report #20104 (Closed): GDAL data provider cache is not cleared after triggerRepaint
Applied in changeset commit:qgis|e7d15b64951da2d7efba0d32e40cb294aefcd9db. Even Rouault
11:09 AM Bug report #20104 (Closed): GDAL data provider cache is not cleared after triggerRepaint
Applied in changeset commit:qgis|e7d15b64951da2d7efba0d32e40cb294aefcd9db. Even Rouault
11:09 AM Bug report #20098 (Closed): getFeatures() can't be run twice on an OSM file
Applied in changeset commit:qgis|906f80219f726ce36d8a23fb758938bdf8a75db1. Even Rouault
11:09 AM Bug report #20098 (Closed): getFeatures() can't be run twice on an OSM file
Applied in changeset commit:qgis|906f80219f726ce36d8a23fb758938bdf8a75db1. Even Rouault
11:02 AM Bug report #19987 (Closed): Anchor point legend not firmly anchored in template
Applied in changeset commit:qgis|530397c1683cc787ef90bc27e2d958779ed0d754. Nyall Dawson
11:02 AM Bug report #19987 (Closed): Anchor point legend not firmly anchored in template
Applied in changeset commit:qgis|530397c1683cc787ef90bc27e2d958779ed0d754. Nyall Dawson
05:30 AM Bug report #19987 (In Progress): Anchor point legend not firmly anchored in template
Nyall Dawson
10:31 AM Bug report #20094 (Closed): Extracting z-coordinates takes ages and makes the system unresponsive
Applied in changeset commit:qgis|9d82df5d16ebb3e13dfc09e45307c6d1a7d1828a. Anonymous
10:31 AM Bug report #20094 (Closed): Extracting z-coordinates takes ages and makes the system unresponsive
Applied in changeset commit:qgis|9d82df5d16ebb3e13dfc09e45307c6d1a7d1828a. Anonymous
09:59 AM Feature request #20102 (Open): Pre-render canvas outside of visible area
Giovanni Manghi
09:53 AM Feature request #20102: Pre-render canvas outside of visible area
Yes.
I have 8-core CPU. Tried to disable and to enable multi-core rendering with 2,4,8 cores. It doesn't help much
Alexey T
09:57 AM Bug report #18951 (Closed): Layer-symbology menu do not change in any language
duplicate of #19879 Jürgen Fischer
09:57 AM Bug report #18951 (Closed): Layer-symbology menu do not change in any language
duplicate of #19879 Jürgen Fischer
09:34 AM Bug report #18286: cannot filter by $geometry, $length, $area etc.
Just filling out a bug report when I noticed this one.
Filtering a line or polygon layer by $length or $area doesn't...
Tudor Bărăscu
09:15 AM Bug report #19671: The Ok button for the form dialog is disabled for NOT NULL Postgres columns
@Nyall Yes! IMHO It's ok that the forms get the constraints automatically but the settings of the constraints should ... Tudor Bărăscu
08:08 AM Bug report #19671 (Feedback): The Ok button for the form dialog is disabled for NOT NULL Postgres...
Does this relate to #20073 ? Nyall Dawson
08:08 AM Bug report #19671 (Feedback): The Ok button for the form dialog is disabled for NOT NULL Postgres...
Does this relate to #20073 ? Nyall Dawson
07:48 AM Bug report #19671 (Open): The Ok button for the form dialog is disabled for NOT NULL Postgres col...
Tudor Bărăscu
08:44 AM Bug report #19043 (Closed): Data defined override for line width doesn't work properly when takin...
Works! Tudor Bărăscu
08:38 AM Bug report #10739 (Closed): Custom Forms with Python logic don't work anymore as the dialog close...
Not relevant anymore (at least for me). Tudor Bărăscu
08:37 AM Bug report #17018 (Closed): Entering the < character in a Constraint description field doesn't sh...
It works on Master now Tudor Bărăscu
07:23 AM Bug report #18993: QGIS3 Layout: the html label renderer ignores many styles e.g. font-size, lett...
For the record, it's a CSS syntax requirement, not a Qt-specific behavior here. Mathieu Pellerin - nIRV
07:20 AM Bug report #18993 (Rejected): QGIS3 Layout: the html label renderer ignores many styles e.g. font...
You need to remove the space before your unit type:
e.g.
font-size: 600pt;
Nyall Dawson
07:20 AM Bug report #18993 (Rejected): QGIS3 Layout: the html label renderer ignores many styles e.g. font...
You need to remove the space before your unit type:
e.g.
font-size: 600pt;
Nyall Dawson
06:44 AM Bug report #19471 (Feedback): Crash when start print layout
Nyall Dawson
05:06 AM Bug report #14897 (Closed): Styling panel name: Remove the biggest "Undo/Redo" buttons in History...
Applied in changeset commit:qgis|c0d35ce5de92fdc337ae22ebe80ce80a14663567. Nathan Woodrow
05:06 AM Bug report #14897 (Closed): Styling panel name: Remove the biggest "Undo/Redo" buttons in History...
Applied in changeset commit:qgis|c0d35ce5de92fdc337ae22ebe80ce80a14663567. Nathan Woodrow
03:58 AM Bug report #14466 (Rejected): Conditional formatted table cells expressions are evaluated wrong
Can't reproduce here but reopen if it's still happening in lastest nighly builds. Nathan Woodrow
03:58 AM Bug report #14466 (Rejected): Conditional formatted table cells expressions are evaluated wrong
Can't reproduce here but reopen if it's still happening in lastest nighly builds. Nathan Woodrow

2018-10-14

01:48 AM Bug report #19688 (In Progress): [Expression]Allow to remove custom functions directly from QGIS
I have started working on this but have some issues with the QFile::remove not removing the file. Nathan Woodrow
12:39 AM Feature request #17033: Replace provider filter by expression engine

> I'd just like to add that the edit limitation is related to the data format you are working with (shapefiles?). D...
Giovanni Manghi
12:35 AM Bug report #20074: Blank canvas after applying filter/query builder
Saber Razmjooei wrote:
> The problem is even worse. The whole canvas goes blank for me.
here is not even necessar...
Giovanni Manghi
11:48 AM Bug report #20074: Blank canvas after applying filter/query builder
The problem is even worse. The whole canvas goes blank for me. Saber Razmjooei
11:48 AM Bug report #20074: Blank canvas after applying filter/query builder
The problem is even worse. The whole canvas goes blank for me. Saber Razmjooei
11:48 AM Bug report #20074: Blank canvas after applying filter/query builder
The problem is even worse. The whole canvas goes blank for me. Saber Razmjooei
11:48 AM Bug report #20074: Blank canvas after applying filter/query builder
The problem is even worse. The whole canvas goes blank for me. Saber Razmjooei
11:40 AM Bug report #20074 (Open): Blank canvas after applying filter/query builder
Saber Razmjooei
11:36 AM Bug report #20074 (Closed): Blank canvas after applying filter/query builder
Hmmm...it appears to be working in 3.3 but as soon as I move the map, all features disappear. Saber Razmjooei
12:30 AM Bug report #20073 (Feedback): Form validation doesn't take care of 2 columns primary key
Etienne -- I'm thinking of removing the force-disabling of these checkboxes so that users can ALWAYS turn off the con... Nyall Dawson
11:20 PM Bug report #2113 (Open): curved labels: only a few are drawn
Giovanni Manghi
07:52 PM Bug report #2113: curved labels: only a few are drawn
This problem still exists in 3.2.1. I tried increasing letter spacing and changing to all-caps for the letter sizes ... Tom Grundy
07:52 PM Bug report #2113: curved labels: only a few are drawn
This problem still exists in 3.2.1. I tried increasing letter spacing and changing to all-caps for the letter sizes ... Tom Grundy
10:32 PM Bug report #20105 (Feedback): Processing Toolkit Heatmap (Kernel Density Estimation) Gives Error ...
It's likely a lack of space. Try with a larger pixel size or smaller radius. Nyall Dawson
04:59 PM Bug report #20105 (Closed): Processing Toolkit Heatmap (Kernel Density Estimation) Gives Error "C...
Using OS X High Sierra, QGIS 3.2.3, Python 3.6.5 and running Heatmap from the processing tool box on a layer projecte... Konrad Lawson
10:24 PM Feature request #20102 (Feedback): Pre-render canvas outside of visible area
Tried to enable multi-core rendering? Giovanni Manghi
10:24 PM Feature request #20102 (Feedback): Pre-render canvas outside of visible area
Tried to enable multi-core rendering? Giovanni Manghi
10:24 PM Feature request #20102 (Feedback): Pre-render canvas outside of visible area
Tried to enable multi-core rendering? Giovanni Manghi
10:05 PM Bug report #20108 (Open): QGIS save project not working properly
Steps to reproduce the error:
-Load a 3.2.3 .qgz file in QGIS Master (ae397bf24a) installed via OSGEO4W
-Save the...
Mario Reyes
09:58 PM Bug report #20107 (Open): Inconsistent number of decimal places in Identify tool
In QGIS 3.3.0-Master, using the Identify tool, the Length, Area and Perimeter values are displayed always with 3 deci... Andrea Giudiceandrea
05:52 PM Feature request #20106 (Open): When editing a regular shape the dragging needs to give a constrai...
In Qgis 3 is this useful set of tools to create regular shapes like squares, rectangles etc
If you want to make a ...
Patrick Dunford
05:51 PM Bug report #20104 (In Progress): GDAL data provider cache is not cleared after triggerRepaint
https://github.com/qgis/QGIS/pull/8186/ Even Rouault
03:34 PM Bug report #20104 (Closed): GDAL data provider cache is not cleared after triggerRepaint
While porting Serval plugin [1] to QGIS 3.2 I have discovered that after a raster datasource is modified and triggerR... Radek Pasiok
03:27 PM Feature request #19571: Add support to read WFS GML data containing geometry collections
PR: https://github.com/qgis/QGIS/pull/8185
Also there is a GDAL fix needed to parse the MultiGeometry.geometryMemb...
Even Rouault
03:21 PM Feature request #19571 (Open): Add support to read WFS GML data containing geometry collections
Even Rouault
12:44 PM Bug report #20098: getFeatures() can't be run twice on an OSM file
https://github.com/qgis/QGIS/pull/8184 Even Rouault
12:02 PM Bug report #19969 (Closed): GDAL_contour not found
Saber Razmjooei
11:12 AM Bug report #18622: Mouse pointer displacement
Hi Konrad, the color picker is odd because it has a transparent area that is supposed to take the color of the backgr... Alessandro Pasotti
10:18 AM Bug report #18622: Mouse pointer displacement
Thanks Alessandro,
I'm running 3.2.3 now.
I can confirm that there is a similar problem for the color picker cu...
Konrad Lawson

2018-10-13

01:35 AM Bug report #20074: Blank canvas after applying filter/query builder
I just confirmed the problem exists on 3.2.3 with the previous note.
I installed the weekly x64 build (commit:9ccb1b...
Ivan Ivanov
10:34 PM Bug report #20103 (Closed): Data Type Change in Clip Raster by Mask Layer
Already fixed in 3.4 Nyall Dawson
10:34 PM Bug report #20103 (Closed): Data Type Change in Clip Raster by Mask Layer
Already fixed in 3.4 Nyall Dawson
10:28 PM Bug report #20103 (Closed): Data Type Change in Clip Raster by Mask Layer
In the Clip Raster by Mask Layer tool the default GDAL console call includes the -ot parameter with a default value o... Martin Lacayo
03:23 PM Bug report #18622: Mouse pointer displacement
Of course this needs to be fixed, we have only a few MacOS developers (and I'm not one of them) so this could take so... Alessandro Pasotti
03:03 PM Bug report #18622: Mouse pointer displacement
Alessandro Pasotti wrote:
> Can you please make this test?
>
> When digitizing, open the python console and type ...
Konrad Lawson
01:36 PM Feature request #20102 (Feedback): Pre-render canvas outside of visible area
Moving and zooming a map with many features is slow.
I propose to make some improvements.
1. Prerender some buffer ...
Alexey T
10:09 AM Feature request #19161: [Processing] GDAL translate needs more option
I think so, gdal_warp and gdal_transalte are 2 differents programm with different goals even if they have common func... Dominique Lyszczarz
09:55 AM Feature request #17033: Replace provider filter by expression engine
Editing filtered layer does not works either with Geopackage, or maybe I'm missing something. Dominique Lyszczarz
06:45 AM Bug report #20101 (Closed): [Processing] "Buffer" is not listed as an edit in place algorithm for...
"Buffer" is not listed as an edit in place algorithm for polygon layer while "multi-ring" alg is. Harrissou Santanna
06:08 AM Bug report #20100 (Open): [Processing] Edit-in place "Drop geometries" algorithm from the locator...
I accidentally run the in-place edit "drop geometries" alg (from the locator bar) on the provided sqlite layer (witho... Harrissou Santanna
05:29 AM Bug report #20099 (Closed): Locator bar does not update the filter of algorithms according to act...
Add a point and line layers
Select the line layer
In the locator bar, type "ef ". You get the list of edit-in-place...
Harrissou Santanna
02:40 AM Bug report #20098: getFeatures() can't be run twice on an OSM file
Using GDAL/OGR 2.2.3 on Ubuntu 18.04 Etienne Trimaille
02:30 AM Bug report #20098 (Closed): getFeatures() can't be run twice on an OSM file
Since this commit https://github.com/qgis/QGIS/commit/f410b4a4da07463a25786045b107282dffabf1bd, the python iterator g... Etienne Trimaille

2018-10-12

12:57 AM Bug report #20074: Blank canvas after applying filter/query builder
You need to test on 3.3, not 3.2 Nyall Dawson
10:46 PM Bug report #20074: Blank canvas after applying filter/query builder
I can confirm it happens on the current latest Debian and Windows version with .osm files, 3.2.3. I found a workaroun... Ivan Ivanov
12:56 AM Bug report #20097 (Rejected): iface.addvectorlayer doesn't work in processing script
This isnt thread safe, so not possible in 3.x. use context.addLayerToLoadOnCompletion instead Nyall Dawson
12:56 AM Bug report #20097 (Rejected): iface.addvectorlayer doesn't work in processing script
This isnt thread safe, so not possible in 3.x. use context.addLayerToLoadOnCompletion instead Nyall Dawson
10:31 PM Bug report #20097 (Rejected): iface.addvectorlayer doesn't work in processing script
Hello,
if you try to load a layer within a processing script using : layer = iface.addVectorLayer("path2asimplesha...
Vincent Dionne
10:29 PM Feature request #20096 (Open): Discover relations for PostGIS tables where the database user is n...
The "Discover Relations" feature is a great time-saver, but for PostGIS layers, it only works when the database user ... Matt Yoder
10:27 PM Bug report #20094 (In Progress): Extracting z-coordinates takes ages and makes the system unrespo...
PR (master) https://github.com/qgis/QGIS/pull/8177 Alessandro Pasotti
10:27 PM Bug report #20094 (In Progress): Extracting z-coordinates takes ages and makes the system unrespo...
PR (master) https://github.com/qgis/QGIS/pull/8177 Alessandro Pasotti
09:30 PM Bug report #20094: Extracting z-coordinates takes ages and makes the system unresponsive
In addition to 2.18 this also affects master . Alessandro Pasotti
09:30 PM Bug report #20094: Extracting z-coordinates takes ages and makes the system unresponsive
In addition to 2.18 this also affects master . Alessandro Pasotti
08:01 PM Bug report #20094 (Closed): Extracting z-coordinates takes ages and makes the system unresponsive
qgis displays the sand-dial forever and other applications become unresponsive when z-coordinates are extracted.
S...
Karl Kastner
08:58 PM Bug report #20095 (Closed): QGIS composer changing legend position when exporting
I'm observing the same issue than "this question":https://gis.stackexchange.com/questions/265163/qgis-map-composer-ch... Clément Ronzon
06:48 PM Bug report #19099: Data defined Size legend is wrong when using separated symbols

I have also noticed this problem. From some testing, seems that the symbols size in the legend is using the actual ...
Alexandre Neto
06:11 PM Bug report #20090 (Closed): GeoPackage SQL issues in DB Manager
duplicate of #18974 (edited) Giovanni Manghi
06:11 PM Bug report #20090 (Closed): GeoPackage SQL issues in DB Manager
duplicate of #18974 (edited) Giovanni Manghi
05:03 PM Bug report #20090: GeoPackage SQL issues in DB Manager
SQL queries on geometries failed on every gpkg I tested.
Here is a sample.
I tested the same queries with ogrinfo...
Antoine Fonoxo
04:09 PM Bug report #20090 (Feedback): GeoPackage SQL issues in DB Manager
post the dataset plesae. Giovanni Manghi
02:23 PM Bug report #20090 (Closed): GeoPackage SQL issues in DB Manager
DB Manager issues with GPKG geometries on perfectly valid GeoPackage files (made by QGIS or ogr2ogr).
The following ...
Antoine Fonoxo
06:01 PM Bug report #20091: WCS request for a GeoServer ImageMosaic reports invalid layer provider
I am currently testing it locally. I will see if I can provide it externally or send some data after the weekend. Nikola Jankovic
03:57 PM Bug report #20091 (Feedback): WCS request for a GeoServer ImageMosaic reports invalid layer provider
An URL we can use would be great. Giovanni Manghi
02:25 PM Bug report #20091 (Open): WCS request for a GeoServer ImageMosaic reports invalid layer provider
I have published temporal tiff files as an ImageMosaic with GeoServer and tested with normal GET requests and everyth... Nikola Jankovic
04:39 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
JOSE ANTONIO VERA wrote:
> Giovanni Manghi wrote:
> > > > means that It only works if the destination folder is: \D...
Giovanni Manghi
04:22 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
Giovanni Manghi wrote:
> > > means that It only works if the destination folder is: \Documents or \my Desktop or at ...
JOSE ANTONIO VERA
04:22 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
Giovanni Manghi wrote:
> > > means that It only works if the destination folder is: \Documents or \my Desktop or at ...
JOSE ANTONIO VERA
04:22 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
Giovanni Manghi wrote:
> > > means that It only works if the destination folder is: \Documents or \my Desktop or at ...
JOSE ANTONIO VERA
03:57 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command

> > means that It only works if the destination folder is: \Documents or \my Desktop or at the root of an external ...
Giovanni Manghi
03:01 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
Giovanni Manghi wrote:
> JOSE ANTONIO VERA wrote:
> > I was able to do the process with GDAL Sieve in QGIS 3.2.3
>...
JOSE ANTONIO VERA
04:36 PM Bug report #19868: copy/paste style doesn't works
can you check for Qt warnings if you have anything related to metaenum in the log? (not sure if you need to compile u... Denis Rouzaud
04:07 PM Bug report #19868 (Open): copy/paste style doesn't works
Hi Denis,
I test on ubuntu 16.04 with 46938c0 and whatever datasource I use, copying style (all or sub section) doe...
Regis Haubourg
04:28 PM Bug report #20093 (Closed): Save / Load style window allows to change text
fixed in commit:6bade339350a5673304d136c7c8d193f64f48d8b Denis Rouzaud
04:28 PM Bug report #20093 (Closed): Save / Load style window allows to change text
fixed in commit:6bade339350a5673304d136c7c8d193f64f48d8b Denis Rouzaud
04:14 PM Bug report #20093 (Closed): Save / Load style window allows to change text
The new super cool window to choose parts of layer definition for load / save in QML or DB allox user to modify the t... Regis Haubourg
04:27 PM Bug report #13487 (Open): QGIS allows to create tables with invalid field names
wrong commit message.... Denis Rouzaud
04:26 PM Bug report #13487 (Closed): QGIS allows to create tables with invalid field names
Denis Rouzaud
04:11 PM Bug report #19259: QGIS 3. Oracle error while adding features - ORA-01861
I had this issue too. Apparently it's a problem with the date format columns. Maxime Resibois
04:05 PM Bug report #19020 (Closed): [Layout] Inconsistencies in export to image vs svg file naming
Can't reproduce. Harrissou Santanna
04:05 PM Bug report #19020 (Closed): [Layout] Inconsistencies in export to image vs svg file naming
Can't reproduce. Harrissou Santanna
03:49 PM Bug report #18543 (Feedback): 'Select features by value' QGIS crashes
can you test with the latest 2.18? Giovanni Manghi
03:49 PM Bug report #18543 (Feedback): 'Select features by value' QGIS crashes
can you test with the latest 2.18? Giovanni Manghi
12:10 PM Bug report #18543: 'Select features by value' QGIS crashes
In QGIS 3 it is resolved, but in qgis 2.18.20 it is not resolved. Enrico Fiore
02:28 PM Bug report #20092 (Open): GeoPackage SQL issues in DB Manager
DB Manager issues with GPKG geometries on perfectly valid GeoPackage files (made by QGIS or ogr2ogr).
The following ...
Antoine Fonoxo
12:45 PM Bug report #20085 (Closed): Failed DXF export
Thanks for confirmation. Harrissou Santanna
12:45 PM Bug report #20085 (Closed): Failed DXF export
Thanks for confirmation. Harrissou Santanna
12:45 PM Bug report #20085 (Closed): Failed DXF export
Thanks for confirmation. Harrissou Santanna
12:24 PM Bug report #20085: Failed DXF export
SOLVED! Many thanks!It tries to assign a default location "bin". When I instead give a path of my own it works again.... Anders Brändström
11:34 AM Bug report #20085: Failed DXF export

> 3. name of the file to be created
do you set a path other than the name?
Giovanni Manghi
11:32 AM Bug report #20085: Failed DXF export
1. I have the project open
2. I click "Export project to DXF"
3. I get a page where I can set the layers or select ...
Anders Brändström
10:40 AM Bug report #20085 (Feedback): Failed DXF export
What do you mean by "get failed"? Any error message? Empty file? No output (in a folder you have necessary rights)?
...
Harrissou Santanna
07:29 AM Bug report #20085 (Closed): Failed DXF export
QGIS 3.2.3-Bonn
Exporting project to DXF
Getting Export failed when trying to export project. It worked yesterday w...
Anders Brändström
12:43 PM Bug report #20089 (Closed): Concurrent access to the same shape file db don't recognize a new ver...
when i try to make a project compose by one or more shape file, and i try to open it in concurrent access by two or m... Roberto Comune Boffelli Comune
11:06 AM Feature request #20066 (Open): Implement tool to load INSPIRE GML datasets
Giovanni Manghi
11:02 AM Bug report #20084 (Feedback): Saving a geopackage causes data table columns to delete
Can you please try with QGIS master to see if it makes any difference? thanks. Giovanni Manghi
11:02 AM Bug report #20084 (Feedback): Saving a geopackage causes data table columns to delete
Can you please try with QGIS master to see if it makes any difference? thanks. Giovanni Manghi
11:02 AM Bug report #20084 (Feedback): Saving a geopackage causes data table columns to delete
Can you please try with QGIS master to see if it makes any difference? thanks. Giovanni Manghi
04:10 AM Bug report #20084 (Closed): Saving a geopackage causes data table columns to delete
This has happened to me at least twice, fortunately I kept the original tables.
1. A shapefile was saved as a geop...
Patrick Dunford
10:59 AM Bug report #1170 (Feedback): GPS Plugin non-functional (OS X) for Serial Bus/Com port units
Giovanni Manghi
07:42 AM Bug report #1170: GPS Plugin non-functional (OS X) for Serial Bus/Com port units
Still true? Paolo Cavallini
10:48 AM Bug report #20088 (Open): "Embed Layers and Groups" only allows to embed from qgs files, not qgz
More details here: http://osgeo-org.1560.x6.nabble.com/QGIS-Developer-QGIS-3-does-not-allow-to-embed-layers-from-qgz-... magerlin -
10:29 AM Bug report #20087 (Open): Axis order issue for urn:ogc:def:crs:EPSG::4326
While using the WCS 1.0.0 connection capabilities in QGIS, we noticed that QGIS by default uses lon/lat axis order fo... Robin Houtmeyers
10:28 AM Bug report #20086 (Closed): Label tools not working on rule based labelling
Fixed in 3.4 Nyall Dawson
10:28 AM Bug report #20086 (Closed): Label tools not working on rule based labelling
Fixed in 3.4 Nyall Dawson
09:59 AM Bug report #20086 (Closed): Label tools not working on rule based labelling
If the labelling option is set to ruele based labelling the labelling tools are working only on labels with Auxiliary... Johannes Metzler
07:16 AM Bug report #20077: geopackage - table operations via network shares take a very long time
Okay, that's not nice, of course. The concurrent use is one of the main advantage when storing data on a shared netwo... Burghardt Scholle
06:41 AM Feature request #20083 (Feedback): Eliminate multiple dialog levels in Layer Properties
Why not just use the styling dock? It all works perfectly without extra dialogs there. Nyall Dawson
03:53 AM Feature request #20083 (Feedback): Eliminate multiple dialog levels in Layer Properties
Currently in the layer properties it is divided into a number of areas. Most of the areas in this dialog are well des... Patrick Dunford
06:20 AM Bug report #20078 (Closed): QGIS crashed when trying to enable Processing Plugin
Alessandro Pasotti
02:17 AM Bug report #20055 (Closed): Legend in Print Layout does not follow set map-theme
Duplicate of #16795 Nyall Dawson
02:17 AM Bug report #20055 (Closed): Legend in Print Layout does not follow set map-theme
Duplicate of #16795 Nyall Dawson
02:16 AM Bug report #20081 (Closed): Problem with legend for multi-style and themes in Report
Nyall Dawson

2018-10-11

11:35 PM Bug report #20081: Problem with legend for multi-style and themes in Report
Duplicate of #20055 Saber Razmjooei
09:29 PM Bug report #20081 (Closed): Problem with legend for multi-style and themes in Report
The legend generated in the Report, is based on the default style of the layer style.
My use case is as:
1- Added...
Saber Razmjooei
10:53 PM Bug report #20078: QGIS crashed when trying to enable Processing Plugin
Thank you so much. That worked. Sri Mounica Motipalli
04:40 PM Bug report #20078 (Feedback): QGIS crashed when trying to enable Processing Plugin
Try creating (and using) a new/clean profile. Giovanni Manghi
04:40 PM Bug report #20078 (Feedback): QGIS crashed when trying to enable Processing Plugin
Try creating (and using) a new/clean profile. Giovanni Manghi
03:16 PM Bug report #20078 (Closed): QGIS crashed when trying to enable Processing Plugin
I some how missed Processing plugin in my menu bar. So I'm trying to get it back by trying to check the checkbox asso... Sri Mounica Motipalli
10:22 PM Feature request #20075: Print Composer: Sort attribute table objects by non-displayed fields
Would also love to see this functionality! Jamie Sheehan
10:00 PM Feature request #20066: Implement tool to load INSPIRE GML datasets
You need to convert it using ogr2ogr (v 2.2) and a template, which with a quick googling I found out to be https://in... Saber Razmjooei
09:59 PM Feature request #20066: Implement tool to load INSPIRE GML datasets
You need to convert it using ogr2ogr (v 2.2) and a template, which with a quick googling I found out to be https://in... Saber Razmjooei
09:57 PM Bug report #20082 (Open): Split Tool "Bursts" linestring when used on complex linestring
When using the Split tool on a complex linestring (lots of nodes) the linestring "bursts" into many segments. Attache... Simon Dellis
09:44 PM Bug report #20079: CRS with Scaling in PROJ4 causes Vertex Tool to fail
In that case duplicate of #20080 Saber Razmjooei
09:42 PM Bug report #20079 (Closed): CRS with Scaling in PROJ4 causes Vertex Tool to fail
In that case duplicate of #20079 Saber Razmjooei
09:42 PM Bug report #20079 (Closed): CRS with Scaling in PROJ4 causes Vertex Tool to fail
In that case duplicate of #20079 Saber Razmjooei
07:53 PM Bug report #20079: CRS with Scaling in PROJ4 causes Vertex Tool to fail
Well, now I cannot reproduce this bug!
Vertex Tool is now finding features on layers with scaling in the CRS. I c...
Keith Johnson
06:13 PM Bug report #20079 (Closed): CRS with Scaling in PROJ4 causes Vertex Tool to fail
I created a CRS based on a State Plane and added a +k_0 parameter in order to make measured dimensions fit ground ref... Keith Johnson
09:00 PM Bug report #20077: geopackage - table operations via network shares take a very long time
The use of SQLITE_USE_OGR_VFS=YES has the side effect of not implementing SQLite locking, which explains the speed in... Even Rouault
04:41 PM Bug report #20077: geopackage - table operations via network shares take a very long time
Okay, it's been a long day but ...
wow, the environment variable "SQLITE_USE_OGR_VFS=YES" has done it - under Window...
Burghardt Scholle
12:44 PM Bug report #20077: geopackage - table operations via network shares take a very long time
Can you retry your tests by defining the following environment variables (may require restarting QGIS each time you c... Even Rouault
11:31 AM Bug report #20077 (Open): geopackage - table operations via network shares take a very long time
I have created a new geopackage with OpenStreetMap data under QGIS Master. Unfortunately, there is also the problem w... Burghardt Scholle
06:28 PM Bug report #20080 (Open): Saving Memory Layer to a file misses Scaling part of the CRS
I created a custom CRS based on a state plane, and added a +k_0 parameter to make ground references in an image measu... Keith Johnson
06:05 PM Bug report #16575: QGIS 2.18.7 crashes on macOS 10.12.4 when undocking the label panel
Peter Petrik wrote:
> unable to reproduce with QGIS 3.3 (375afe5beaf5a17768f4898401a8d76ee4af3878) on MacOS Mojave 1...
Giovanni Manghi
05:22 PM Bug report #16575: QGIS 2.18.7 crashes on macOS 10.12.4 when undocking the label panel
unable to reproduce with QGIS 3.3 (375afe5beaf5a17768f4898401a8d76ee4af3878) on MacOS Mojave 10.14.0 Peter Petrik
05:35 PM Bug report #16025 (Feedback): [macOS] Control feature rendering order will crash QGIS
Giovanni Manghi
05:12 PM Bug report #16025: [macOS] Control feature rendering order will crash QGIS
unable to reproduce with QGIS 3.3 (375afe5beaf5a17768f4898401a8d76ee4af3878) on MacOS Mojave 10.14.0 Peter Petrik
03:29 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon
> is not a regression, in QGIS 3 changed the way the shapefiles are interpreted... now they are always loaded as MULT... Gabriele Monfardini
02:42 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon

> Even if it is probably not an high priority issue, I think current behaviour is a regression w.r.t. 2.18.
> Is i...
Giovanni Manghi
02:35 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon
> that is what the option does. What the option does NOT is converting MULTI geometries to fit NOT MULTI table after ... Gabriele Monfardini
12:36 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon

> The fact is that if you are importing a NOT MULTI shapefile in a new table, and you check the option in DB Manage...
Giovanni Manghi
12:14 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon
Giovanni Manghi wrote:
> that option name in DB Manager always has been misleading and SHOULD really be changed. DB ...
Gabriele Monfardini
12:07 PM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
that's fine - thanks! Andreas Neumann
11:51 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
Yes I will fix it. But I have to continue on Monday. Hope you don't mind. David Signer
11:47 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
Good catch - thanks!
In 3.0 this still worked fine. So something in 3.2 or master introduced this problem.
Can ...
Andreas Neumann
11:45 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
fyi:
Found the error. It's because it creates a value like "03.0108_1" in @[email protected] called by @createFeatu...
David Signer
10:25 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
Just seen another thing. Could it be that an error is given back and then the error message is tried to write into th... David Signer
10:16 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
I've been able to reproduce.
Your expression:
@get_ews_anlage_gemeinde_formatted() || '.' || get_ews_anlage_nr( g...
David Signer
11:35 AM Bug report #20068 (Closed): Geopackage: problems with renaming or drop tables
Giovanni Manghi
11:34 AM Bug report #20068: Geopackage: problems with renaming or drop tables
You're right. I've created the new issue #20077 (edited). Can you please close this issue? Thanks. Burghardt Scholle
11:19 AM Bug report #20068: Geopackage: problems with renaming or drop tables
Burghardt Scholle wrote:
> I have created a new geopackage with OpenStreetMap data under QGIS Master. Unfortunately,...
Giovanni Manghi
11:13 AM Bug report #20068: Geopackage: problems with renaming or drop tables
I have created a new geopackage with OpenStreetMap data under QGIS Master. Unfortunately, there is also the problem w... Burghardt Scholle
10:29 AM Bug report #20068: Geopackage: problems with renaming or drop tables
At the moment only smb, but I will try nfs during the day. Burghardt Scholle
10:15 AM Bug report #20068: Geopackage: problems with renaming or drop tables
Burghardt Scholle wrote:
> geopackage via network,
a network shared folder? on what protocol (i.e. samba, nfs, e...
Giovanni Manghi
10:10 AM Bug report #20068: Geopackage: problems with renaming or drop tables
Hi,
first of all Thank you very much for your answers.
This morning I did extensive tests with geopackage files. I ...
Burghardt Scholle
09:58 AM Bug report #17642 (Closed): Grass cannot be used in QGIS 2.18.14 LTR on Windows 64bit
Did recently some fresh installations of 2.18.24 on Windows and Processing/GRASS is just fine. Giovanni Manghi
09:58 AM Bug report #17642 (Closed): Grass cannot be used in QGIS 2.18.14 LTR on Windows 64bit
Did recently some fresh installations of 2.18.24 on Windows and Processing/GRASS is just fine. Giovanni Manghi
09:58 AM Bug report #17642 (Closed): Grass cannot be used in QGIS 2.18.14 LTR on Windows 64bit
Did recently some fresh installations of 2.18.24 on Windows and Processing/GRASS is just fine. Giovanni Manghi
07:24 AM Bug report #17642: Grass cannot be used in QGIS 2.18.14 LTR on Windows 64bit
Hi, I had the same issue so what i did to solve it was to just erase the path of the GRASS7, because it was not using... Andrea Tapia
09:57 AM Bug report #20033 (Closed): Column misalignment after operations on large geopackage
Giovanni Manghi
07:57 AM Bug report #19688: [Expression]Allow to remove custom functions directly from QGIS
> which is not a common/easy place to reach - I personnaly struggle to access the AppData folder on Windows
If you...
Nathan Woodrow
07:37 AM Feature request #20076 (Open): Heatmap renderer should feature a holding feature or a way to comp...
The heatmap renderer is a very handy tool, but if the MAX value is set to "automatic", that value is recomputed each ... vince -

2018-10-10

12:37 AM Feature request #20075 (Open): Print Composer: Sort attribute table objects by non-displayed fields
*Short version:* Allow Print Composer attribute tables to be sorted by fields that are not selected for display.
*...
Nick Allen
10:29 PM Bug report #20063: The "output folder" Processing configuration has no effect
That's correct - they are always stored in the /tmp / windows temp folder Nyall Dawson
02:53 PM Bug report #20063 (Closed): The "output folder" Processing configuration has no effect
Nyall Dawson wrote:
> That's not used for temporary files. It's only used as the default location for "real" outputs...
Giovanni Manghi
02:53 PM Bug report #20063 (Closed): The "output folder" Processing configuration has no effect
Nyall Dawson wrote:
> That's not used for temporary files. It's only used as the default location for "real" outputs...
Giovanni Manghi
02:50 PM Bug report #20063: The "output folder" Processing configuration has no effect
That's not used for temporary files. It's only used as the default location for "real" outputs. Nyall Dawson
12:29 PM Bug report #20063: The "output folder" Processing configuration has no effect
Nyall Dawson wrote:
> Which setting are your referring to exactly?
settings > options > processing > general > ou...
Giovanni Manghi
10:27 PM Bug report #18798 (Rejected): Polygon Shapefile loaded as Multipolygon
This change is by design - shapefiles don't have a definition of single/multi geometries (unless they are point layer... Nyall Dawson
10:27 PM Bug report #18798 (Rejected): Polygon Shapefile loaded as Multipolygon
This change is by design - shapefiles don't have a definition of single/multi geometries (unless they are point layer... Nyall Dawson
05:49 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon
Gabriele Monfardini wrote:
> Loading a shapefile to postgis using DB Manager a polygon shapefile is imported as mult...
Giovanni Manghi
05:43 PM Bug report #18798: Polygon Shapefile loaded as Multipolygon
Loading a shapefile to postgis using DB Manager a polygon shapefile is imported as multipolygon even if the option "C... Gabriele Monfardini
10:24 PM Bug report #20074 (Feedback): Blank canvas after applying filter/query builder
Try with 3.3 - there's been some related fixes. Nyall Dawson
09:55 PM Bug report #20074 (Closed): Blank canvas after applying filter/query builder
I imported a lines vector layer from OSM. I then used query builder to apply a filter, e.g. "highway" = 'primary'. ... David Pierce
09:17 PM Bug report #20033: Column misalignment after operations on large geopackage
Hmm, after I was able to track down the installer, the process seems to work fine in the weekly build. belg4mit -
05:14 PM Bug report #20033: Column misalignment after operations on large geopackage
belg4mit - wrote:
> I just tried with subsetting, and it still fails here. Are you also using Windows?
I'm on Lin...
Giovanni Manghi
04:52 PM Bug report #20033: Column misalignment after operations on large geopackage
I just tried with subsetting, and it still fails here. Are you also using Windows? And generating a geopackage? Creat... belg4mit -
04:52 PM Bug report #20033: Column misalignment after operations on large geopackage
I just tried with subsetting, and it still fails here. Are you also using Windows? And generating a geopackage? Creat... belg4mit -
04:52 PM Bug report #20033: Column misalignment after operations on large geopackage
I just tried with subsetting, and it still fails here. Are you also using Windows? And generating a geopackage? Creat... belg4mit -
01:06 PM Bug report #20033: Column misalignment after operations on large geopackage

> Here's the ogr2ogr output https://nmrgroupinc-my.sharepoint.com/:u:/p/jpierce/EcV_o8PsWalGgh-nuDKDRJYBd9ADzEHOHsi...
Giovanni Manghi
12:32 PM Bug report #20033: Column misalignment after operations on large geopackage

> Here's the ogr2ogr output https://nmrgroupinc-my.sharepoint.com/:u:/p/jpierce/EcV_o8PsWalGgh-nuDKDRJYBd9ADzEHOHsi...
Giovanni Manghi
08:37 PM Bug report #20073: Form validation doesn't take care of 2 columns primary key
Moreover, checkbox doesn't keep the same status when we switch from one layer to another one.
Look at my GIF, at t...
Etienne Trimaille
08:24 PM Bug report #20073 (Closed): Form validation doesn't take care of 2 columns primary key
I have a PostGIS table like this referencing my schemas and my tables:... Etienne Trimaille
06:41 PM Bug report #20072 (Open): Field validation is not done automatically
On my GIF,
* I set the "schema" combobox to "biocenose marine".
* My "table" combobox is updated according to the d...
Etienne Trimaille
06:08 PM Bug report #19960 (Closed): layer tree embedded widget provider's supportsLayer() method is never...
Thanks Ricardo! Giovanni Manghi
06:08 PM Bug report #19960 (Closed): layer tree embedded widget provider's supportsLayer() method is never...
Thanks Ricardo! Giovanni Manghi
06:08 PM Bug report #19960: layer tree embedded widget provider's supportsLayer() method is never called
Alessandro Pasotti wrote:
> it's used in QgsLayerTreeEmbeddedConfigWidget::setLayer
yes, it is **now** used in `Q...
Ricardo Silva
03:36 PM Bug report #19960 (Rejected): layer tree embedded widget provider's supportsLayer() method is nev...
it's used in QgsLayerTreeEmbeddedConfigWidget::setLayer Alessandro Pasotti
03:36 PM Bug report #19960 (Rejected): layer tree embedded widget provider's supportsLayer() method is nev...
it's used in QgsLayerTreeEmbeddedConfigWidget::setLayer Alessandro Pasotti
05:06 PM Bug report #16787: Error when clicking button 'TEST' with for the rule "ELSE" in rule based renderer
Still valid in master 3.3, even with the dedicated "Else" radiobutton: if you enable the Else option, you have no acc... Harrissou Santanna
04:03 PM Bug report #20068: Geopackage: problems with renaming or drop tables
I cannot replicate the issue on Linux with QGIS master and GDAL master.
What I did:
- open a GeoPackage with a sing...
Even Rouault
03:48 PM Bug report #20068 (Feedback): Geopackage: problems with renaming or drop tables
Giovanni Manghi
03:23 PM Bug report #20068: Geopackage: problems with renaming or drop tables
I've just tested delete a GPKG table from the browser and re-create it with the same name and it works just fine on c... Alessandro Pasotti
02:35 PM Bug report #20068: Geopackage: problems with renaming or drop tables
I feared this answer :-). Burghardt Scholle
02:09 PM Bug report #20068: Geopackage: problems with renaming or drop tables
as far as I can remember this is a long standing issue, affecting also Spatialite tables. Giovanni Manghi
01:00 PM Bug report #20068 (Closed): Geopackage: problems with renaming or drop tables
Hi,
after deleting a table in a geopackage, I can no longer create a table with the same name in the same gpkg file....
Burghardt Scholle
03:47 PM Bug report #20071 (Open): "Show feature count" on a rule based renderer gives wrong result for th...
This is a revival of #13999.
In the attached screenshots, I use the Else shortcut in one case and the full rule in t...
Harrissou Santanna
03:45 PM Bug report #20070 (Open): In rule based renderer, "Show feature count" returns 0 if no symbol is ...
In rule based renderer, "show features count" does not return the count for any rule that has its symbol disabled. Se... Harrissou Santanna
03:38 PM Feature request #19892 (Closed): Append the layer name to the algorithm dialog title when in edit...
I think it's done, right? Alessandro Pasotti
03:38 PM Feature request #19892 (Closed): Append the layer name to the algorithm dialog title when in edit...
I think it's done, right? Alessandro Pasotti
03:34 PM Bug report #19964 (Closed): layer tree embedded widgets do not show up for raster layers
Alessandro Pasotti
03:19 PM Bug report #19778: macOS: QGIS 3.2.2 canvas do not scale when resizing program window
I confirm the same bug also in Mac OS 10.13 and Mac OS 10.14 with 3.2.2 and 3.2.3 (attached printscreen of my fellow) amedeo fadini
02:54 PM Bug report #20069 (Feedback): Qgis Crashes while perform spatial query (difference)
"gdal tools" do not exist anymore in QGIS 3, so I guess is about a Processing tool.
Anyway we need more details (t...
Giovanni Manghi
02:50 PM Bug report #20069 (Closed): Qgis Crashes while perform spatial query (difference)

Crash ID: a7c268a28ae77cf4b529c72afb0e7e918acd0dc8
Stack Trace
QgsNativeAlgorithms::trUtf8 :
Q...
Agenildo Abreu
01:26 PM Feature request #20066: Implement tool to load INSPIRE GML datasets
See attached image:
as I suspected the GML in the complex INSPIRE data model. You need to use a plugin that allows y...
Giovanni Manghi
01:26 PM Feature request #20066: Implement tool to load INSPIRE GML datasets
See attached image:
as I suspected the GML in the complex INSPIRE data model. You need to use a plugin that allows y...
Giovanni Manghi
01:26 PM Feature request #20066: Implement tool to load INSPIRE GML datasets
See attached image:
as I suspected the GML in the complex INSPIRE data model. You need to use a plugin that allows y...
Giovanni Manghi
12:39 PM Feature request #20066 (Feedback): Implement tool to load INSPIRE GML datasets
Hi,
please add a link (or attach one of those files).
Anyway, if the GML are in the (complex) INSPIRE data model ...
Giovanni Manghi
11:30 AM Feature request #20066: Implement tool to load INSPIRE GML datasets
Capture of diferente files Noel Suárez González
11:30 AM Feature request #20066: Implement tool to load INSPIRE GML datasets
Capture of diferente files Noel Suárez González
11:13 AM Feature request #20066 (Open): Implement tool to load INSPIRE GML datasets
some GML files can not be loaded correctly in QGIS 3.2.3 in macOS Noel Suárez González
11:54 AM Bug report #20067: Duplicate feature action fails with PostgreSQL error message
The concerned column is most likely the one named "anlage_nr" with the following definition:
anlage_nr charact...
Andreas Neumann
11:52 AM Bug report #20067 (Closed): Duplicate feature action fails with PostgreSQL error message
The Duplicate feature action that is available from the Actions menu of a feature form is currently broken in QGIS 3.... Andreas Neumann
11:30 AM Bug report #19987: Anchor point legend not firmly anchored in template
Actually, afaics no need to use a template. An anchor set for a legend in a print layout is not respected:
# create ...
Harrissou Santanna
11:30 AM Bug report #19987: Anchor point legend not firmly anchored in template
Actually, afaics no need to use a template. An anchor set for a legend in a print layout is not respected:
# create ...
Harrissou Santanna
09:59 AM Bug report #20053: decimal separator in csv files
Thanks for checking, actually I think that even with C locale the output was not entirely correct: you did not get th... Alessandro Pasotti
09:56 AM Bug report #20053 (Closed): decimal separator in csv files
Applied in changeset commit:qgis|859b39a63438e426f227114747a49ddcfd49bc09. Anonymous
09:56 AM Bug report #20053 (Closed): decimal separator in csv files
Applied in changeset commit:qgis|859b39a63438e426f227114747a49ddcfd49bc09. Anonymous
09:47 AM Bug report #20054 (Closed): regression: console flooded with QSql* warnings when rendering XYZ la...
Applied in changeset commit:qgis|69dab87d4a254bca9c3b22ae0dc07af3f22c6a1a. Mathieu Pellerin - nIRV
09:47 AM Bug report #20054 (Closed): regression: console flooded with QSql* warnings when rendering XYZ la...
Applied in changeset commit:qgis|69dab87d4a254bca9c3b22ae0dc07af3f22c6a1a. Mathieu Pellerin - nIRV
09:41 AM Bug report #20054 (In Progress): regression: console flooded with QSql* warnings when rendering X...
Yes, it comes from the auth system and there is a PR: https://github.com/qgis/QGIS/pull/8149 (I wonder why this ticke... Alessandro Pasotti
09:41 AM Bug report #20054 (In Progress): regression: console flooded with QSql* warnings when rendering X...
Yes, it comes from the auth system and there is a PR: https://github.com/qgis/QGIS/pull/8149 (I wonder why this ticke... Alessandro Pasotti
09:39 AM Bug report #20057 (Closed): CTRL+V does not paste copied features on linux/kde
Local issue Alessandro Pasotti
09:39 AM Bug report #20057 (Closed): CTRL+V does not paste copied features on linux/kde
Local issue Alessandro Pasotti
09:26 AM Bug report #20065 (Closed): QgsInterface::adddockwidget slows down when large layers open
Having opened a larger vector layer, reloading a plugin using PluginReloader is slower in QGIS 3.2.x than in QGIS 2.... Johannes Elstner
03:56 AM Bug report #19886: QGIS application dialog can't be resized with the keyboard
Yes, I tried with QtCreator, QtDesigner, VLC and Virtualbox. They all works well. Etienne Trimaille
03:07 AM Bug report #19886 (Feedback): QGIS application dialog can't be resized with the keyboard
Does it work with other Qt applications? Nyall Dawson

2018-10-09

12:56 AM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Denis Rouzaud wrote:
> Konrad, can you tell me how you installed QGIS (homebrew?)
Hi Denis, myself (on two machin...
Konrad Lawson
09:11 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
3.2.3. , installed with the installer from qgis.org… Ades Six
08:49 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Konrad, can you tell me how you installed QGIS (homebrew?) Denis Rouzaud
11:31 PM Bug report #20064: QGIS Server WFS Update Transaction bug
Error from server is: 400 Bad Request:... Uroš Preložnik
11:14 PM Bug report #20064: QGIS Server WFS Update Transaction bug
Pull request: https://github.com/qgis/QGIS/pull/8155 Uroš Preložnik
10:05 PM Bug report #20064 (Closed): QGIS Server WFS Update Transaction bug
WFS Update transaction only works if there is only one Property element in transaction (meaning one field or geometry... Uroš Preložnik
11:06 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> from that comment I deduce that if the layers are added using the QGIS Browser the issue do...
Andrea Giudiceandrea
08:50 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time

> If I compare to using the OpenFileGDB driver, then the performance is slower (not as instantaneous as the OpenFil...
Giovanni Manghi
11:05 AM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> > Title: Slow performance when using OGR FileGDB driver to read file geodatabases.
>
> s...
Casper Børgesen
10:44 AM Bug report #19968: Very long loading times when opening the same FileGDB the second time

> Title: Slow performance when using OGR FileGDB driver to read file geodatabases.
should not reflect the findin...
Giovanni Manghi
10:25 PM Bug report #20008: Very Slow Table Operations while the Table is Open
related user list thread http://osgeo-org.1560.x6.nabble.com/Very-Slow-Table-Operations-in-QGIS-3-2-3-td5380521.html Luigi Pirelli
09:08 PM Bug report #19886: QGIS application dialog can't be resized with the keyboard
I can confirm this issue on another computer, still with Ubuntu and QGIS 3.2.
It also doesn't work with the mouse ...
Etienne Trimaille
09:04 PM Bug report #20033: Column misalignment after operations on large geopackage
Hrmph, so they are. I could have sworn I checked after subsetting the original ogr2ogr output and it was fine. It see... belg4mit -
08:48 PM Bug report #20033: Column misalignment after operations on large geopackage
belg4mit - wrote:
> Did you check the screenshots I included? I neglected to spell it out,
> but some of the fields...
Giovanni Manghi
02:58 PM Bug report #20033: Column misalignment after operations on large geopackage
Did you check the screenshots I included? I neglected to spell it out,
but some of the fields are pretty obviously m...
belg4mit -
10:56 AM Bug report #20033: Column misalignment after operations on large geopackage
belg4mit - wrote:
> The sharing permissions were incorrect for some reason, try this:
> https://nmrgroupinc-my.shar...
Giovanni Manghi
08:44 PM Bug report #20059 (Closed): Map projection shrieked drastically
duplicates #19524 Denis Rouzaud
08:44 PM Bug report #20059 (Closed): Map projection shrieked drastically
duplicates #19524 Denis Rouzaud
11:37 AM Bug report #20059: Map projection shrieked drastically
I think there is already another thicket about this issue. Giovanni Manghi
11:37 AM Bug report #20059: Map projection shrieked drastically
I think there is already another thicket about this issue. Giovanni Manghi
08:48 AM Bug report #20059 (Closed): Map projection shrieked drastically
In QGIS 3.2.3 (Bonna) on macOS High Sierra, the map projection window shrinked to larger extent. In the earlier versi... PARESH CHAUKHANDE
08:43 PM Bug report #18914 (Feedback): [macOS] Plugin list corrupted by wrongly placed checkboxes on Mac
I have observed this in the past but cannot reproduce anymore (I guess it was when plugin was broken).
Can you test ...
Denis Rouzaud
08:35 PM Bug report #20063: The "output folder" Processing configuration has no effect
Which setting are your referring to exactly? Nyall Dawson
11:46 AM Bug report #20063 (Closed): The "output folder" Processing configuration has no effect
After changing it in processing general options and restarting qgis, the ouput folder for temp layer is always the on... Giovanni Manghi
08:32 PM Bug report #18452 (Closed): Snapping options missing on Mac
Denis Rouzaud
08:26 PM Bug report #18043 (Feedback): Zoom and identify tools very small on MacOSX with retina display
Denis Rouzaud
08:26 PM Bug report #18043: Zoom and identify tools very small on MacOSX with retina display
I have found this patch to make the cursor way too big.
Jeremy, were the cursor looking fine on your Mac lately? Do ...
Denis Rouzaud
08:25 PM Bug report #20049: Snap geometries -tool cannot handle polylines with length of zero
Petri Latva-Käyrä wrote:
> I unfortunately cannot test with QGIS 3, as I do not have permissions in my office comput...
Giovanni Manghi
03:26 PM Bug report #20049: Snap geometries -tool cannot handle polylines with length of zero
I unfortunately cannot test with QGIS 3, as I do not have permissions in my office computer to update software myself... Petri Latva-Käyrä
11:17 AM Bug report #20049 (Feedback): Snap geometries -tool cannot handle polylines with length of zero
Are you speaking of the core C++ plugin? Giovanni Manghi
11:17 AM Bug report #20049 (Feedback): Snap geometries -tool cannot handle polylines with length of zero
Are you speaking of the core C++ plugin? Giovanni Manghi
08:24 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
JOSE ANTONIO VERA wrote:
> I was able to do the process with GDAL Sieve in QGIS 3.2.3
> It was only done in a folde...
Giovanni Manghi
04:43 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
I was able to do the process with GDAL Sieve in QGIS 3.2.3
It was only done in a folder other than C:
I did it in \...
JOSE ANTONIO VERA
11:32 AM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
JOSE ANTONIO VERA wrote:
> I have the same error.
> I understand that "GDAL Tools" is native to QGIS 3.2.3.
"gda...
Giovanni Manghi
06:19 PM Bug report #18803 (Feedback): Flip order of lower and upper class values for graduated symbology
As I'd fill this dialog from top to bottom and ascendantly sorted, it makes sense to me to provide lower values befor... Harrissou Santanna
04:26 PM Bug report #20053: decimal separator in csv files
Alessandro Pasotti wrote:
> Just to be sure: if you change your locale number formatting options to "English" or "C"...
Soren Lindqvist
11:11 AM Bug report #20053: decimal separator in csv files
Giovanni, this had actually nothing to do with CSV, it was a bug in the json formatter. Alessandro Pasotti
11:10 AM Bug report #20053 (In Progress): decimal separator in csv files
PR https://github.com/qgis/QGIS/pull/8150 Alessandro Pasotti
11:10 AM Bug report #20053 (In Progress): decimal separator in csv files
PR https://github.com/qgis/QGIS/pull/8150 Alessandro Pasotti
11:10 AM Bug report #20053 (In Progress): decimal separator in csv files
PR https://github.com/qgis/QGIS/pull/8150 Alessandro Pasotti
11:10 AM Bug report #20053 (In Progress): decimal separator in csv files
PR https://github.com/qgis/QGIS/pull/8150 Alessandro Pasotti
11:01 AM Bug report #20053 (Feedback): decimal separator in csv files
was the csv added with the "add delimited text layer" tool? Giovanni Manghi
11:01 AM Bug report #20053 (Feedback): decimal separator in csv files
was the csv added with the "add delimited text layer" tool? Giovanni Manghi
11:01 AM Bug report #20053 (Feedback): decimal separator in csv files
was the csv added with the "add delimited text layer" tool? Giovanni Manghi
09:02 AM Bug report #20053: decimal separator in csv files
Just to be sure: if you change your locale number formatting options to "English" or "C" in QGIS options general tab,... Alessandro Pasotti
01:02 PM Bug report #19455 (Closed): Add MSSQL layer to canvas crashes QGIS3.2
Giovanni Manghi
12:57 PM Bug report #19455: Add MSSQL layer to canvas crashes QGIS3.2
I just tested as per above. It doesn't crash 3.3 master now. Also works with larger data sets from MSSQL. Looks good.... Liam Caffrey
12:33 PM Bug report #20061 (Closed): Repeated switching on and off the editing mode of the ORACLE-layer fr...
Giovanni Manghi
12:32 PM Bug report #20061: Repeated switching on and off the editing mode of the ORACLE-layer freezes qgis
Nyall Dawson wrote:
> Have you tried with no plugins enabled?
oh... I apologize for the trouble. Now I tried with...
Evgeniy Z
10:58 AM Bug report #20061 (Feedback): Repeated switching on and off the editing mode of the ORACLE-layer ...
Have you tried with no plugins enabled? Nyall Dawson
09:45 AM Bug report #20061 (Closed): Repeated switching on and off the editing mode of the ORACLE-layer fr...
QGIS 3.2.3
In project only one Oracle-layer, for example.
If I try to commit after each change of geometry, then th...
Evgeniy Z
11:47 AM Feature request #20060: Allow cancelling gdal algorithms
Lene Fischer wrote:
> I now have tried to change settings for Processing to output folder to c:\gis\temp
> restart ...
Giovanni Manghi
09:09 AM Feature request #20060: Allow cancelling gdal algorithms
I now have tried to change settings for Processing to output folder to c:\gis\temp
restart program
trying to run th...
Lene Fischer
08:59 AM Feature request #20060: Allow cancelling gdal algorithms
Get this report
Processing algorithm…
Algorithm 'Clip raster by mask layer' starting…
Input parameters:
{ 'ALPHA...
Lene Fischer
08:57 AM Feature request #20060 (Open): Allow cancelling gdal algorithms
Trying to clip a raster with a mask layer. Deciding to stop the process - but Executing in the statusbar does not res... Lene Fischer
11:44 AM Bug report #20032: Attributes Form gives Wrong value for $area
I cannot reproduce on current master (or I didn't understand how to) Alessandro Pasotti
11:10 AM Bug report #20032: Attributes Form gives Wrong value for $area
Lene Fischer wrote:
> Regression from 3.2 to 3.3 sorry If I have misunderstood that ...
Hi Lene,
that is correct...
Giovanni Manghi
11:38 AM Bug report #20047 (Closed): SQL queries on virtual layers frequently crashes QGIS
see also #20029 (edited) Giovanni Manghi
11:38 AM Bug report #20047 (Closed): SQL queries on virtual layers frequently crashes QGIS
see also #20029 (edited) Giovanni Manghi
11:36 AM Bug report #20062 (Feedback): crash after opening attribute table
Please try with QGIS master, I think there have been fixes in this area lately. Giovanni Manghi
11:36 AM Bug report #20062 (Feedback): crash after opening attribute table
Please try with QGIS master, I think there have been fixes in this area lately. Giovanni Manghi
10:07 AM Bug report #20062 (Closed): crash after opening attribute table
h2. User Feedback
I just joined a vector multiple geometry layer with a table from a postgres database. I opened t...
Luca Lancellotti
11:21 AM Bug report #20051 (Feedback): SAGA "Fill Sink" keeps running
Lene Fischer wrote:
> The process keeps runnning - but the data is processed and is placed in C:\Users\dlt265\AppDat...
Giovanni Manghi
11:21 AM Bug report #20051 (Feedback): SAGA "Fill Sink" keeps running
Lene Fischer wrote:
> The process keeps runnning - but the data is processed and is placed in C:\Users\dlt265\AppDat...
Giovanni Manghi
11:21 AM Bug report #20051 (Feedback): SAGA "Fill Sink" keeps running
Lene Fischer wrote:
> The process keeps runnning - but the data is processed and is placed in C:\Users\dlt265\AppDat...
Giovanni Manghi
11:16 AM Bug report #20058: $area show wrong values in labels
Thanks for correcting my typo and for precising the title/theme. Roberto Uhlig
09:01 AM Bug report #20058: $area show wrong values in labels
Please can anyone correct my typo in the title/theme field to the correct $area and remove the wrong -§area-.
I can'...
Roberto Uhlig
08:39 AM Bug report #20058 (Closed): $area show wrong values in labels
Hi core-Dev's and community!
Thanks for fixing Ellipsoid $area calculation.
Now I'm trying to label my feature's ...
Roberto Uhlig
11:14 AM Bug report #20054 (Feedback): regression: console flooded with QSql* warnings when rendering XYZ ...
is "authentication system" the correct category here? Giovanni Manghi
11:14 AM Bug report #20054 (Feedback): regression: console flooded with QSql* warnings when rendering XYZ ...
is "authentication system" the correct category here? Giovanni Manghi
06:11 AM Bug report #20054 (Closed): regression: console flooded with QSql* warnings when rendering XYZ la...
Not sure when this started happening, just noticed the messages today. When rendering a XYZ layer with an https conne... Mathieu Pellerin - nIRV
11:11 AM Bug report #20057 (Feedback): CTRL+V does not paste copied features on linux/kde
master/kde here, works ok for me. Giovanni Manghi
08:27 AM Bug report #20057 (Closed): CTRL+V does not paste copied features on linux/kde
It migh be a local issue but CTRL+V does nothing here Alessandro Pasotti
10:59 AM Bug report #20052 (Feedback): crash after drawing new polygon in vector layer
1) try with a new profile
2) try qgis master (with a clean/new profile)
and see of it makes any difference. Thanks.
Giovanni Manghi
10:59 AM Bug report #20052 (Feedback): crash after drawing new polygon in vector layer
1) try with a new profile
2) try qgis master (with a clean/new profile)
and see of it makes any difference. Thanks.
Giovanni Manghi
09:23 AM Bug report #20056 (Rejected): Where is Zonal Statistics?
Look in the processing toolbox Nyall Dawson
09:23 AM Bug report #20056 (Rejected): Where is Zonal Statistics?
Look in the processing toolbox Nyall Dawson
08:02 AM Bug report #20056 (Rejected): Where is Zonal Statistics?
Hello,
I just downloaded the new version of QGIS - Bonn and I cannot find the extension Zonal Statistics. Can anyo...
Ester Polaina
08:58 AM Bug report #19424 (Closed): Not possible to add views from Add Layer window
Applied in changeset commit:qgis|c225f56026bf12c6068ad8a6b087e4194b3e8fc8. Martin Dobias
08:58 AM Bug report #19424 (Closed): Not possible to add views from Add Layer window
Applied in changeset commit:qgis|c225f56026bf12c6068ad8a6b087e4194b3e8fc8. Martin Dobias
08:54 AM Bug report #20020: Geopackage avoid intersection allow no geometry
Thanks :-) Lene Fischer
08:39 AM Bug report #20020 (Closed): Geopackage avoid intersection allow no geometry
Applied in changeset commit:qgis|08b6b6065a6c0aea8302b68739a5e8d902feba11. Anonymous
08:39 AM Bug report #20020 (Closed): Geopackage avoid intersection allow no geometry
Applied in changeset commit:qgis|08b6b6065a6c0aea8302b68739a5e8d902feba11. Anonymous
07:18 AM Bug report #20055 (Closed): Legend in Print Layout does not follow set map-theme
If multiple map themes are created using different styles for the 1 layer, and Print Layouts are created using the "f... Jamie Sheehan
06:35 AM Feature request #16047 (Closed): Use the raster band names when available
Applied in changeset commit:qgis|b86f84edb5f40c3bf1275f3f2511b2d315e5f88b. Anonymous
06:35 AM Feature request #16047 (Closed): Use the raster band names when available
Applied in changeset commit:qgis|b86f84edb5f40c3bf1275f3f2511b2d315e5f88b. Anonymous
02:50 AM Bug report #19555 (Closed): DWG import overwrites existing Geopackage without warning
Applied in changeset commit:qgis|b74292aaaeed37ccc20f74ebb12ba364218db149. Anonymous
02:50 AM Bug report #19555 (Closed): DWG import overwrites existing Geopackage without warning
Applied in changeset commit:qgis|b74292aaaeed37ccc20f74ebb12ba364218db149. Anonymous

2018-10-08

12:24 AM Bug report #20039: toolbar icons not correctly aligned
It seems that such strange behaviour is a little bit everywhere in the GUI dialog windows.
Some other examples:
...
Andrea Giudiceandrea
10:46 PM Bug report #20047: SQL queries on virtual layers frequently crashes QGIS
If anyone's looking into this, here's my findings:
- it's windows only
- the exception thrown in sqlite when the ex...
Nyall Dawson
01:36 PM Bug report #20047 (Closed): SQL queries on virtual layers frequently crashes QGIS
SQL requests on virtual layers frequently crashes Dbmanager. It's seems the 2.18 vesion was more stable and produces ... matthieu carlini
10:44 PM Bug report #20051: SAGA "Fill Sink" keeps running
In 3.0 the choice was made to only expose the native output formats from 3rd party providers like saga. We did this t... Nyall Dawson
05:46 PM Bug report #20051: SAGA "Fill Sink" keeps running
The process keeps runnning - but the data is processed and is placed in C:\Users\dlt265\AppData\Local\Temp Lene Fischer
04:44 PM Bug report #20051 (Closed): SAGA "Fill Sink" keeps running
Using SAGA Fill Sink ans Fill Sink (Wang & Liu)I´m only presented to save in SDAT filformat.
In 2.18 there are multi...
Lene Fischer
10:29 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
I've added a quick screencast showing Garth's workaround for this problem on 3.2.x and OSX High Sierra. The video is ... Konrad Lawson
09:18 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
Same problem here. Also, in university course teaching QGIS, the 80% of our students who are using Macs are all exper... Konrad Lawson
10:10 PM Bug report #20045 (Closed): Display of more complex attribute forms broken
Applied in changeset commit:qgis|f5d2b88dbaa9c20fcf2bc7153f1ce74650f19950. David Signer
10:10 PM Bug report #20045 (Closed): Display of more complex attribute forms broken
Applied in changeset commit:qgis|f5d2b88dbaa9c20fcf2bc7153f1ce74650f19950. David Signer
11:01 AM Bug report #20045: Display of more complex attribute forms broken
I think it's because of an implementation regarding the QML widget I did. David Signer
10:48 AM Bug report #20045: Display of more complex attribute forms broken
The container-groups are not displayed. I'll investigate on this. David Signer
09:58 AM Bug report #20045 (Closed): Display of more complex attribute forms broken
In the latest master version the display of more complex forms is totally broken. A lot of information is missing.
...
Andreas Neumann
09:18 PM Bug report #20053 (Closed): decimal separator in csv files
When opening cvs files with data that contains decimals separator with "." it change after opening in QGIS to "," the... Soren Lindqvist
06:44 PM Bug report #19390: Copy/Paste features causes crash in 2.18.24
Antonio Viscomi wrote:
> This issues it appear also in Qgis 2.18.24 in case of an incompatibility in the types of so...
Antonio Viscomi
06:42 PM Bug report #19390: Copy/Paste features causes crash in 2.18.24
This issues it appear also in Qgis 2.18.24 in case of an incompatibility in the types of some field Antonio Viscomi
05:07 PM Bug report #20049: Snap geometries -tool cannot handle polylines with length of zero
I just tested a similar scenario in QGIS 3 and it works just fine, can you try a recent build of QGIS 3? Alessandro Pasotti
04:57 PM Bug report #20049: Snap geometries -tool cannot handle polylines with length of zero
Can you please provide an example project and data to reproduce the issue? Alessandro Pasotti
03:14 PM Bug report #20049 (Closed): Snap geometries -tool cannot handle polylines with length of zero
I encountered an issue with the Snap geometries -tool when trying to snap polylines to reference polylines. My datase... Petri Latva-Käyrä
04:48 PM Bug report #20052 (Closed): crash after drawing new polygon in vector layer
just after right-clicking to draw a new polygon in a vector layer from sqlite database joined with a sqlite table fro... Luca Lancellotti
04:28 PM Feature request #13778 (Closed): Keep dialog persistent on view>panels and View>toolbar
Lene Fischer
04:27 PM Feature request #13772 (Closed): Store 'Field Edit Widget' in Layer Defiition File
I close this request - while it is implemented in 3.4 Lene Fischer
04:27 PM Feature request #13772 (Closed): Store 'Field Edit Widget' in Layer Defiition File
I close this request - while it is implemented in 3.4 Lene Fischer
04:26 PM Bug report #20032 (Open): Attributes Form gives Wrong value for $area
Regression from 3.2 to 3.3 sorry If I have misunderstood that ...
Lene Fischer
10:34 AM Bug report #20032 (Feedback): Attributes Form gives Wrong value for $area
For me on linux an Int64 returns null.
Why this was tagged a regression, works fine on 2.18?
Giovanni Manghi
04:00 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
I have the same error.
I understand that "GDAL Tools" is native to QGIS 3.2.3.
I've run the process in both, from m...
JOSE ANTONIO VERA
04:00 PM Bug report #20043: Sieve GDAL error Not recognized as an internal or external command
I have the same error.
I understand that "GDAL Tools" is native to QGIS 3.2.3.
I've run the process in both, from m...
JOSE ANTONIO VERA
10:19 AM Bug report #20043 (Feedback): Sieve GDAL error Not recognized as an internal or external command
"gdal tools", you sure? or you run the command from the Processing toolbox?
Start by trying again using QGIS 3 with ...
Giovanni Manghi
10:19 AM Bug report #20043 (Feedback): Sieve GDAL error Not recognized as an internal or external command
"gdal tools", you sure? or you run the command from the Processing toolbox?
Start by trying again using QGIS 3 with ...
Giovanni Manghi
03:57 PM Bug report #20048: Incorrectly uses epsg:2158 for epsg:25829 prj files
Datums are exactly the same.
PROJCS["ETRS89 / UTM zone 29N",
GEOGCS["ETRS89",
DATUM["European_Terr...
Luigi Pirelli
02:02 PM Bug report #20048 (Closed): Incorrectly uses epsg:2158 for epsg:25829 prj files
One of the official spanish crs is EPSG:25829 (ETRS 89, UTM Zone 29) and many downloadable shapefiles for public admi... Francisco Puga
03:24 PM Bug report #20050 (Open): GPKG and SQLite files containing raster layers are incorrectly added to...
*1)* When *a geopackage file contains only 1 raster layer* and you drag and drop the GPKG file into the map or you us... Andrea Giudiceandrea
03:20 PM Bug report #20013: Mars projection issue
Hi, I can confirm this issue is not OS specific as I can reproduce it on a linux system.
As far as I can tell, thi...
Matthie Volat
03:04 PM Bug report #20033: Column misalignment after operations on large geopackage
The sharing permissions were incorrect for some reason, try this:
https://nmrgroupinc-my.sharepoint.com/:u:/p/jpierc...
belg4mit -
10:14 AM Bug report #20033: Column misalignment after operations on large geopackage
belg4mit - wrote:
> Example files and results are available here https://nmrgroupinc-my.sharepoint.com/:u:/r/persona...
Giovanni Manghi
01:07 PM Bug report #18742: [Layout] In multisize pages layout, exporting to PDF does not behave correctly...
Still present and I think the isssue is what I concluded previously:
> it looks like excluding the first page of the...
Harrissou Santanna
01:03 PM Bug report #20046: Log Messages Panel disappears
The panel disappears. Kadir S
01:02 PM Bug report #20046 (Open): Log Messages Panel disappears
While _Log Messages Panel_ is open, it disappears if I minimize and maximize QGIS. When switching another program and... Kadir S
01:01 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Casper Børgesen wrote:
> > Giovanni Manghi wrote:
> > >... Anyway, if this observation is...
Casper Børgesen
11:20 AM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Casper Børgesen wrote:
> Giovanni Manghi wrote:
> >... Anyway, if this observation is right then the title and desc...
Giovanni Manghi
10:02 AM Bug report #19968 (Open): Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
>... Anyway, if this observation is right then the title and description of this ticket shoul...
Casper Børgesen
11:51 AM Bug report #20044 (Rejected): QGIS crashes while run custom processing algorithm with a selection...
Not a qgis bug - it's due to incorrect use of the API.
You are appending your scope to the expression context once...
Nyall Dawson
11:51 AM Bug report #20044 (Rejected): QGIS crashes while run custom processing algorithm with a selection...
Not a qgis bug - it's due to incorrect use of the API.
You are appending your scope to the expression context once...
Nyall Dawson
09:51 AM Bug report #20044 (Rejected): QGIS crashes while run custom processing algorithm with a selection...

h2. User Feedback
QGIS 3 crashes when running my vector selection algorithm.
The selection was changed on scree...
Michael Kuerbs
11:36 AM Bug report #19564 (Closed): PostgreSQL sequences not always used when adding feature
Giovanni Manghi
10:40 AM Bug report #19564: PostgreSQL sequences not always used when adding feature
I have tested on a fresh install of PostgreSQL 9.6 and can't reproduce the issue. As I am the only one having this is... Nicolas Boisteault
11:15 AM Bug report #16805 (Closed): Corrupting SQL Server tables when using drag and drop in QGIS browser
Applied in changeset commit:qgis|745495fe733ae8694adf3e428156594085dd75c0. Nyall Dawson
11:15 AM Bug report #16805 (Closed): Corrupting SQL Server tables when using drag and drop in QGIS browser
Applied in changeset commit:qgis|745495fe733ae8694adf3e428156594085dd75c0. Nyall Dawson
08:40 AM Bug report #16805 (In Progress): Corrupting SQL Server tables when using drag and drop in QGIS br...
Nyall Dawson
10:15 AM Bug report #20041 (Feedback): crash when handling bad layers
Can you please add some more detail? is not clear to me when this happens or how to try replicate here locally. Giovanni Manghi
10:15 AM Bug report #20041 (Feedback): crash when handling bad layers
Can you please add some more detail? is not clear to me when this happens or how to try replicate here locally. Giovanni Manghi
10:15 AM Bug report #20041 (Feedback): crash when handling bad layers
Can you please add some more detail? is not clear to me when this happens or how to try replicate here locally. Giovanni Manghi
10:15 AM Bug report #20041 (Feedback): crash when handling bad layers
Can you please add some more detail? is not clear to me when this happens or how to try replicate here locally. Giovanni Manghi
10:12 AM Bug report #20029 (Open): SQL query including "row_number" on a virtual layer crashes QGIS
Giovanni Manghi
10:10 AM Bug report #20030: Crashes every time I try to save
Regardless of the project/data loaded in it? Giovanni Manghi
10:09 AM Bug report #20037: Polygon not visible when selected if opacity is set to 0%
As far as I cab remember this as always (QGIS 0.*) been an issue. In fact there should be a ticket around, a very old... Giovanni Manghi
09:00 AM Bug report #13932 (Closed): MSSQL Features Don't Draw when Multiple Geometry Columns are Present
Applied in changeset commit:qgis|da211938944cda270976244115f21fd4ef6c825f. Nyall Dawson
09:00 AM Bug report #13932 (Closed): MSSQL Features Don't Draw when Multiple Geometry Columns are Present
Applied in changeset commit:qgis|da211938944cda270976244115f21fd4ef6c825f. Nyall Dawson
08:05 AM Bug report #13932 (In Progress): MSSQL Features Don't Draw when Multiple Geometry Columns are Pre...
Nyall Dawson
09:00 AM Bug report #15124 (Closed): MSSQL Float Fields Don't Allow Decimal Entry on Forms
Applied in changeset commit:qgis|71c5051356d66a0acbde84f40679ab4ece4bf6bd. Nyall Dawson
09:00 AM Bug report #15124 (Closed): MSSQL Float Fields Don't Allow Decimal Entry on Forms
Applied in changeset commit:qgis|71c5051356d66a0acbde84f40679ab4ece4bf6bd. Nyall Dawson
07:14 AM Bug report #15124 (In Progress): MSSQL Float Fields Don't Allow Decimal Entry on Forms
Nyall Dawson
08:46 AM Bug report #19998: Cannot export output of 'Points along geometry' tool as Geopackage
Yes, it is definitely related... The easiest solution is to delete the fid column in the temporary layer and then sav... Jérôme Guélat
08:41 AM Bug report #17719: Dragging and dropping MS SQL table in browser window causes overwriting of exi...
> Do you think the ability to drag and drop tables in the browser window will be removed entirely in lieu of using a ... Nyall Dawson
08:32 AM Bug report #18608 (Closed): Layer tree embedded widgets do not show up unless you move layer
Applied in changeset commit:qgis|56149ff39a56c8cf809ee57c1af92aef4ca882ec. Anonymous
08:32 AM Bug report #18608 (Closed): Layer tree embedded widgets do not show up unless you move layer
Applied in changeset commit:qgis|56149ff39a56c8cf809ee57c1af92aef4ca882ec. Anonymous
08:14 AM Bug report #15752 (Closed): Degradation of rendering performances in MSSQL provider
Applied in changeset commit:qgis|dafeaf4372b9e029160438345cce852dbfcf0741. Nyall Dawson
06:31 AM Bug report #15752 (In Progress): Degradation of rendering performances in MSSQL provider
Nyall Dawson
07:14 AM Bug report #13684 (Closed): Conditional cell full row doesn't update on value changed
Applied in changeset commit:qgis|7c5cc27b8f89854ea84be14eace13daa7a807dc9. Nathan Woodrow
07:14 AM Bug report #13684 (Closed): Conditional cell full row doesn't update on value changed
Applied in changeset commit:qgis|7c5cc27b8f89854ea84be14eace13daa7a807dc9. Nathan Woodrow
05:08 AM Bug report #15404 (Closed): Hang when compiling complex expressions for mssql provider
Applied in changeset commit:qgis|f630c93816d95fb7c85c718a332f3fd9043703f6. Nyall Dawson
05:08 AM Bug report #15404 (Closed): Hang when compiling complex expressions for mssql provider
Applied in changeset commit:qgis|f630c93816d95fb7c85c718a332f3fd9043703f6. Nyall Dawson
04:04 AM Bug report #15404: Hang when compiling complex expressions for mssql provider
https://github.com/qgis/QGIS/pull/8135 Nyall Dawson
04:02 AM Bug report #15404 (In Progress): Hang when compiling complex expressions for mssql provider
Nyall Dawson
03:21 AM Bug report #15404 (Open): Hang when compiling complex expressions for mssql provider
Hmm - I can reproduce on master too Nyall Dawson
03:21 AM Bug report #15404 (Open): Hang when compiling complex expressions for mssql provider
Hmm - I can reproduce on master too Nyall Dawson
04:48 AM Bug report #14466 (Feedback): Conditional formatted table cells expressions are evaluated wrong
Possible that this has already been fixed in a older version as I can't replicate it in 3.x. Nathan Woodrow
04:48 AM Bug report #14466 (Feedback): Conditional formatted table cells expressions are evaluated wrong
Possible that this has already been fixed in a older version as I can't replicate it in 3.x. Nathan Woodrow
04:47 AM Bug report #14466: Conditional formatted table cells expressions are evaluated wrong
I can't seem to replicate this here using the following
!conditions.png!
Nathan Woodrow
04:47 AM Bug report #14466: Conditional formatted table cells expressions are evaluated wrong
I can't seem to replicate this here using the following
!conditions.png!
Nathan Woodrow
04:05 AM Bug report #19465 (Closed): Pressing Enter in "Label with" deletes expressions
Applied in changeset commit:qgis|556cddd4d9fcb3e45ddb8cd210e2306ef65a2446. Nathan Woodrow
04:05 AM Bug report #19465 (Closed): Pressing Enter in "Label with" deletes expressions
Applied in changeset commit:qgis|556cddd4d9fcb3e45ddb8cd210e2306ef65a2446. Nathan Woodrow
02:01 AM Bug report #19861 (Closed): Browser: Impossible to delete GeoPackage table if the path has accents
Nyall Dawson
02:00 AM Bug report #20042 (Feedback): Crash during closing the program
More detail is needed. Do you see this every time? Have you any plugins installed? Nyall Dawson

2018-10-07

11:22 PM Bug report #20031 (Closed): The only layer contained in a singlelayer GPKG / SQLite / FileGDB is ...
Applied in changeset commit:qgis|119cd8ace97d9dfef6c6d5f5fb3aca727a6cc31f. Even Rouault
11:22 PM Bug report #20031 (Closed): The only layer contained in a singlelayer GPKG / SQLite / FileGDB is ...
Applied in changeset commit:qgis|119cd8ace97d9dfef6c6d5f5fb3aca727a6cc31f. Even Rouault
11:22 PM Bug report #20040 (Closed): "Export to a file" from DBManager to GeoPackage generates a file with...
Applied in changeset commit:qgis|bd6c1115bbef29f06ca02840ac7ecadc2a8ce8e2. Even Rouault
11:22 PM Bug report #20040 (Closed): "Export to a file" from DBManager to GeoPackage generates a file with...
Applied in changeset commit:qgis|bd6c1115bbef29f06ca02840ac7ecadc2a8ce8e2. Even Rouault
11:22 PM Bug report #20038 (Closed): mapCanvas.saveAsImage('path') adds a red cross to the image
Applied in changeset commit:qgis|7c6cb910cc75053dad930eb0e274a2acac87c1d3. Anonymous
11:22 PM Bug report #20038 (Closed): mapCanvas.saveAsImage('path') adds a red cross to the image
Applied in changeset commit:qgis|7c6cb910cc75053dad930eb0e274a2acac87c1d3. Anonymous
04:34 PM Bug report #20038: mapCanvas.saveAsImage('path') adds a red cross to the image
PR https://github.com/qgis/QGIS/pull/8132 Alessandro Pasotti
09:03 PM Bug report #19826 (Closed): GetFeatureInfo with FILTER doesn't work for gpkg - Test added
Applied in changeset commit:qgis|5a9067e722be19cd0ceb3c4417f034ad40c02bb4. Paul Blottiere
09:03 PM Bug report #19826 (Closed): GetFeatureInfo with FILTER doesn't work for gpkg - Test added
Applied in changeset commit:qgis|5a9067e722be19cd0ceb3c4417f034ad40c02bb4. Paul Blottiere
05:32 PM Bug report #17550 (Closed): Opacity slider in the Layers Panel partially broken for WMS and XYZ l...
Duplicates #18608
Borys Jurgiel
05:32 PM Bug report #17550 (Closed): Opacity slider in the Layers Panel partially broken for WMS and XYZ l...
Duplicates #18608
Borys Jurgiel
04:07 PM Bug report #20043 (Closed): Sieve GDAL error Not recognized as an internal or external command
Operating system Windows 10 64 bit
QGIS 3.2.3 Bonn
GDAL version 2.2.4
Problem:
"C:\PROGRA~1\QGIS" Not recogni...
JOSE ANTONIO VERA
11:02 AM Bug report #20042 (Closed): Crash during closing the program
h2. User Feedback
h2. Report Details
*Crash ID*: 92ef31e937cd660304e6d8f8a3bc5989713cbe10
*Stack Trace...
Massimo Calosi

2018-10-06

11:17 PM Bug report #20041: crash when handling bad layers
Jake Maier wrote:
> Qgis crashed when I tried to re-assign the directories to the files. I tried to apply a new dire...
Jake Maier
11:14 PM Bug report #20041 (Closed): crash when handling bad layers
Qgis crashed when I tried to re-assign the directories to the files. I tried to apply a new directory to several file... Jake Maier
10:34 PM Bug report #20040 (Closed): "Export to a file" from DBManager to GeoPackage generates a file with...
From https://lists.osgeo.org/pipermail/qgis-user/2018-October/041207.html
{{{
Just checking if others are observing...
Even Rouault
09:53 PM Bug report #19215 (Closed): KML coordinate format
Fixed/workaround in GDAL:
- master: https://github.com/OSGeo/gdal/commit/b7ae35320a4300822d556396be8e7b3f507012b6
-...
Even Rouault
09:53 PM Bug report #19215 (Closed): KML coordinate format
Fixed/workaround in GDAL:
- master: https://github.com/OSGeo/gdal/commit/b7ae35320a4300822d556396be8e7b3f507012b6
-...
Even Rouault
09:53 PM Bug report #19215 (Closed): KML coordinate format
Fixed/workaround in GDAL:
- master: https://github.com/OSGeo/gdal/commit/b7ae35320a4300822d556396be8e7b3f507012b6
-...
Even Rouault
08:10 PM Bug report #18543: 'Select features by value' QGIS crashes
Is this still an issue? I am unable to reproduce in 3 Stephen Knox
08:08 PM Bug report #20033: Column misalignment after operations on large geopackage
Example files and results are available here https://nmrgroupinc-my.sharepoint.com/:u:/r/personal/jpierce_nmrgroupinc... belg4mit -
08:08 PM Bug report #20033: Column misalignment after operations on large geopackage
Example files and results are available here https://nmrgroupinc-my.sharepoint.com/:u:/r/personal/jpierce_nmrgroupinc... belg4mit -
12:22 PM Bug report #20033 (Feedback): Column misalignment after operations on large geopackage
I tried on master/linux, and cannot confirm. I prepared the data as you describe. Then for both inputs I saved (in gp... Giovanni Manghi
12:22 PM Bug report #20033 (Feedback): Column misalignment after operations on large geopackage
I tried on master/linux, and cannot confirm. I prepared the data as you describe. Then for both inputs I saved (in gp... Giovanni Manghi
12:22 PM Bug report #20033 (Feedback): Column misalignment after operations on large geopackage
I tried on master/linux, and cannot confirm. I prepared the data as you describe. Then for both inputs I saved (in gp... Giovanni Manghi
06:06 PM Bug report #20039 (Closed): toolbar icons not correctly aligned
creating a project relation occurs the one described in the object salvatore fiandaca
05:44 PM Bug report #20030: Crashes every time I try to save
Giovanni Manghi wrote:
> Please try again using a new/clean profile.
Tried it. The problem still persists.
Also ...
ABHISHEK RAMANATHAN
10:54 AM Bug report #20030 (Feedback): Crashes every time I try to save
Please try again using a new/clean profile. Giovanni Manghi
04:37 PM Bug report #19989 (Closed): QGIS crashes on Windows when loading and invalid KML file
Didn't test on Windows, but could reproduce crashes on Linux with ogrinfo by limiting the process memory with ulimit ... Even Rouault
04:37 PM Bug report #19989 (Closed): QGIS crashes on Windows when loading and invalid KML file
Didn't test on Windows, but could reproduce crashes on Linux with ogrinfo by limiting the process memory with ulimit ... Even Rouault
04:37 PM Bug report #19989 (Closed): QGIS crashes on Windows when loading and invalid KML file
Didn't test on Windows, but could reproduce crashes on Linux with ogrinfo by limiting the process memory with ulimit ... Even Rouault
03:22 PM Bug report #20038 (Closed): mapCanvas.saveAsImage('path') adds a red cross to the image
While exporting a series of images for an animation with the TimeManager plugin I noticed a red cross in the exported... S Ottens
01:54 PM Bug report #20029: SQL query including "row_number" on a virtual layer crashes QGIS
Giovanni Manghi wrote:
> This happens regardless of the table used in the query? Does the same on 2.18?
Actually,...
Gus Tech
10:50 AM Bug report #20029 (Feedback): SQL query including "row_number" on a virtual layer crashes QGIS
This happens regardless of the table used in the query? Does the same on 2.18? Giovanni Manghi
10:50 AM Bug report #20029 (Feedback): SQL query including "row_number" on a virtual layer crashes QGIS
This happens regardless of the table used in the query? Does the same on 2.18? Giovanni Manghi
10:50 AM Bug report #20029 (Feedback): SQL query including "row_number" on a virtual layer crashes QGIS
This happens regardless of the table used in the query? Does the same on 2.18? Giovanni Manghi
01:18 PM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
---
Checked this once again.
I have two files in archive
test.qgz - saved in 3.2
test.qgs - the same saved in 2...
Alexey T
11:13 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Alexey T wrote:
> In my original project I have pyramids. Didn't include it in this test
I received a notificatio...
Giovanni Manghi
12:48 PM Bug report #18608: Layer tree embedded widgets do not show up unless you move layer
PR https://github.com/qgis/QGIS/pull/8126 Alessandro Pasotti
12:48 PM Bug report #18608: Layer tree embedded widgets do not show up unless you move layer
PR https://github.com/qgis/QGIS/pull/8126 Alessandro Pasotti
11:38 AM Bug report #20037 (Open): Polygon not visible when selected if opacity is set to 0%
If a polygon layer exists and the style of that layer is set to a Fill pattern and the fill's opacity is set to 0% th... Patrick Dunford
11:02 AM Feature request #20036 (Open): Allow optional outputs for processing models
Hi !
When running a processing model, it happens that you're not interested in all available outputs. In that case...
Olivier Dalang
10:55 AM Bug report #20020: Geopackage avoid intersection allow no geometry
PR https://github.com/qgis/QGIS/pull/8125 Alessandro Pasotti
10:45 AM Bug report #20020: Geopackage avoid intersection allow no geometry
Why this was tagged a regression? is the behavior in 2.18 different? Giovanni Manghi
10:01 AM Bug report #20020: Geopackage avoid intersection allow no geometry
A warning message is actually a good idea, but do you agree with me that the feature(s) should be pasted anyway, even... Alessandro Pasotti
10:54 AM Bug report #20010 (Closed): Abnormal RAM usage by geometry check
Giovanni Manghi
10:52 AM Bug report #19968 (Feedback): Very long loading times when opening the same FileGDB the second time
Andrea Giudiceandrea wrote:
> I can reproduce the issue on Windows 7 64 bit (core i5, 8GB) with QGIS 3.3.0-Master (3...
Giovanni Manghi
10:14 AM Bug report #18301: Processing tools don't ask for input layer when choosing directly a multi laye...
Confirmed also for SQLite and FileGDB (maybe others) multilayer containers.
In processing algorithms dialog window...
Andrea Giudiceandrea
09:22 AM Bug report #20035 (Open): Expressions like `aggregate` or `layer_property` use QgsProject().insta...
Hi !
I'm writing a python algorithm for the processing framework allowing to export PDFs. This requires instantiat...
Olivier Dalang
07:26 AM Feature request #12788: Absolute path to images in composer
IMO this should be classified as a bug rather than feature request, as you'd expect all path to respect the project's... Olivier Dalang
06:16 AM Feature request #20034 (Open): FID field in table should not be editable
When editing a data table for a layer it is possible to accidentally overtype the FID field causing an error when sav... Patrick Dunford

2018-10-05

11:49 PM Bug report #15404 (Feedback): Hang when compiling complex expressions for mssql provider
Just a hunch - can you verify that if you load each layer in turn into QGIS, that the correct crs for the layer is as... Nyall Dawson
03:30 PM Bug report #15404 (Open): Hang when compiling complex expressions for mssql provider
I just checked the described reproduction steps on 3.2.1-Bonn, and, yes, QGIS rendering still hangs on that layer. Th... Joachim Heilmann
10:47 PM Bug report #20027 (Closed): In processing algorithms is not possible to properly select an input ...
Duplicate of #18301 Nyall Dawson
10:47 PM Bug report #20027 (Closed): In processing algorithms is not possible to properly select an input ...
Duplicate of #18301 Nyall Dawson
02:36 PM Bug report #20027 (Closed): In processing algorithms is not possible to properly select an input ...
In processing algorithms dialog window it is not possible to properly select a layer ("Select file" in the algorithm ... Andrea Giudiceandrea
10:38 PM Bug report #20020 (Open): Geopackage avoid intersection allow no geometry
Lene Fischer
10:38 PM Bug report #20020: Geopackage avoid intersection allow no geometry
While inserting a feature with no geometry I would like to get an errormessage just after the insertion, not wait unt... Lene Fischer
05:29 PM Bug report #20020 (Feedback): Geopackage avoid intersection allow no geometry
I'm not sure about the expected behavior: when copy-pasting, I would expect that even if geometry is not compatible o... Alessandro Pasotti
04:23 AM Bug report #20020 (Closed): Geopackage avoid intersection allow no geometry
Digitizing or copy/paste in a geopackage layer with 'avoid intersection' on.
If I paste features in a polygon layer ...
Lene Fischer
10:13 PM Bug report #20033: Column misalignment after operations on large geopackage
Broken in 3.2.3 as well as 3.2.2 belg4mit -
07:57 PM Bug report #20033 (Closed): Column misalignment after operations on large geopackage
I have been working with a large public data set from NY http://gis.ny.gov/gisdata/inventories/details.cfm?DSID=1300
...
belg4mit -
10:05 PM Bug report #10793 (Closed): MSSQL: Add Multipolygon Feature creates wrong geometrytype
Applied in changeset commit:qgis|81db0052ff880c5fd535b6f8eb25516212347199. Nyall Dawson
10:05 PM Bug report #10793 (Closed): MSSQL: Add Multipolygon Feature creates wrong geometrytype
Applied in changeset commit:qgis|81db0052ff880c5fd535b6f8eb25516212347199. Nyall Dawson
08:52 AM Bug report #10793 (In Progress): MSSQL: Add Multipolygon Feature creates wrong geometrytype
Nyall Dawson
10:03 PM Bug report #17773: No Retina / HiDPI support in 2.99 on osx
some more info here http://doc.qt.io/qt-5/scalability.html
apparently Mac has a different way of handling the DPI sc...
Denis Rouzaud
07:45 PM Bug report #19774 (Closed): Missing attributes in large table
Yes, it turns out the errors was ESRI's. belg4mit -
07:29 PM Bug report #20032 (Closed): Attributes Form gives Wrong value for $area
Using Geopackage setting 'Attributes form' to Text Edit Default value using $area and apply default value on update.
...
Lene Fischer
06:35 PM Bug report #19104 (Closed): OPen GDB Directory (ArcGis)
Closing due to lack of feedback Even Rouault
06:35 PM Bug report #19104 (Closed): OPen GDB Directory (ArcGis)
Closing due to lack of feedback Even Rouault
06:33 PM Bug report #19709 (Closed): Exporting a GeoPackage to Shapefile wrongly changes the field types
Even Rouault
05:42 PM Bug report #18477: QGIS 3 "unable to save auxiliary storage"
Same issue in 3.2.1 on Windows 10. Simple project (nevada_county_roads) and base data (Road_Centerlines) attached. ... Tom Grundy
05:42 PM Bug report #18477: QGIS 3 "unable to save auxiliary storage"
Same issue in 3.2.1 on Windows 10. Simple project (nevada_county_roads) and base data (Road_Centerlines) attached. ... Tom Grundy
05:29 PM Bug report #20031 (Closed): The only layer contained in a singlelayer GPKG / SQLite / FileGDB is ...
When there is only 1 layer in a GPKG / SQLite / FileGDB container file and you drag and drop the file in the map or y... Andrea Giudiceandrea
05:12 PM Bug report #20030 (Closed): Crashes every time I try to save
h2. User Feedback
Crashes every time I try to save.
h2. Report Details
*Crash ID*: 65bc8b0471ac57c943ac39fef...
ABHISHEK RAMANATHAN
05:09 PM Bug report #20024 (Feedback): Loss Z value after copying point into another layer
I cannot reproduce with PointZ memory layers on linux/master. Alessandro Pasotti
11:15 AM Bug report #20024 (Closed): Loss Z value after copying point into another layer
I have several Point 3D shape, and after copying points from first layer into another layer and save changes - point ... Ali Kurtveliiev
04:52 PM Bug report #17719: Dragging and dropping MS SQL table in browser window causes overwriting of exi...
Do you think the ability to drag and drop tables in the browser window will be removed entirely in lieu of using a DB... Matthew Baker
05:54 AM Bug report #17719 (Closed): Dragging and dropping MS SQL table in browser window causes overwriti...
Duplicate of #16805 Nyall Dawson
05:54 AM Bug report #17719 (Closed): Dragging and dropping MS SQL table in browser window causes overwriti...
Duplicate of #16805 Nyall Dawson
04:51 PM Feature request #20028 (Rejected): request profile information (qProf 0.4.2)
This is the issue tracker for main QGIS application and qProf is a plugin, you should open a request in the plugin's ... Alessandro Pasotti
04:51 PM Feature request #20028 (Rejected): request profile information (qProf 0.4.2)
This is the issue tracker for main QGIS application and qProf is a plugin, you should open a request in the plugin's ... Alessandro Pasotti
04:40 PM Feature request #20028: request profile information (qProf 0.4.2)
also the scalar factor of the profile (horizontal scale and vertical scale) luis marcelo dambrowski dambrowski
04:00 PM Feature request #20028 (Rejected): request profile information (qProf 0.4.2)
add necessary information in the qProf plugin.
information I need:
x and y axis titles (example: distance and h...
luis marcelo dambrowski dambrowski
04:16 PM Bug report #20029 (Closed): SQL query including "row_number" on a virtual layer crashes QGIS
h2. User Feedback
I was trying this short SQL script on a PostGIS layer in the DB Manager:
select id, gov_na, r...
Gus Tech
04:15 PM Bug report #20025: GDAL/OGR Dissolve algorithm not properly working with point/multipoint layers
Giovanni Manghi wrote:
> Assigning to myself unless you have a patch in the works(?).
I'm not working on a patch....
Andrea Giudiceandrea
02:52 PM Bug report #20025: GDAL/OGR Dissolve algorithm not properly working with point/multipoint layers
Assigning to myself unless you have a patch in the works(?). This probably affects also the buffer tool (that has a d... Giovanni Manghi
02:02 PM Bug report #20025 (Closed): GDAL/OGR Dissolve algorithm not properly working with point/multipoin...
If the input layer is a point/multipoint layer and the output layer is set to "Save to temporary file" or is a shapef... Andrea Giudiceandrea
03:52 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
I can reproduce the issue on Windows 7 64 bit (core i5, 8GB) with QGIS 3.3.0-Master (3032af2dcc) (qgis-dev-3.3.0-84) ... Andrea Giudiceandrea
02:23 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Casper Børgesen wrote:
> > Giovanni Manghi wrote:
> > > Have you tried on a clean profile...
Casper Børgesen
03:40 PM Bug report #20010: Abnormal RAM usage by geometry check
Today I've retry to perform geometry check with the same parameter and the same data
but with a clean user profile
...
Antonio Viscomi
02:50 PM Bug report #19938: GDAL/OGR vector geoprocessing algorithms not working with GPKG, SQLite, FileGD...
Andrea Giudiceandrea wrote:
> Andrea Giudiceandrea wrote:
>
> > Moreover, it is not possible to add the output la...
Andrea Giudiceandrea
02:19 PM Bug report #20026 (Open): Processing algorithms are not able to add the output layer to an exitin...
Core processing algorithms are not able to add the output layer to an exiting SQLite (maybe others?) container file w... Andrea Giudiceandrea
12:36 PM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
In my original project I have pyramids. Didn't include it in this test Alexey T
11:44 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Alexey T wrote:
> Recently this issue was tested in QGIS Desktop 3.2.3 x64
> And as far as I remember this happens ...
Giovanni Manghi
10:30 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Recently this issue was tested in QGIS Desktop 3.2.3 x64
And as far as I remember this happens in some previous vers...
Alexey T
10:21 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Alexy, which version of QGIS 3 are you referring to? 3.0, 3.2, or a current master build?
First thought that comes...
Mathieu Pellerin - nIRV
09:59 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Sorry here it is
https://yadi.sk/d/TAo_ezPuBZ2HjA
Alexey T
09:49 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18

> The project is here (50 Mb):
> https://yadi.sk/d/0rDe-wm9Le8Uzw
missing tif files.
Giovanni Manghi
09:34 AM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
I made further investigation
My raster layers are in EPSG:4326
When I set current view to EPSG:3395 or any other ...
Alexey T
12:13 PM Feature request #4236: Add ability to (over)write CRS for an existing raster file e.g. to geotif ...
Re the suggested workaround to use gdal_edit, I see that this is now available in Processing, as "Assign Projection".... Alister Hood
11:57 AM Feature request #10332 (Closed): List possible databases in MS SQL connection dialog
Nyall Dawson
02:58 AM Feature request #10332 (Feedback): List possible databases in MS SQL connection dialog
This is fixed now, right?
Nyall Dawson
02:58 AM Feature request #10332 (Feedback): List possible databases in MS SQL connection dialog
This is fixed now, right?
Nyall Dawson
09:56 AM Bug report #19771: QGIS slow commit on large tables
referenced in #20008 Luigi Pirelli
09:56 AM Feature request #19790: Handle Bad Layers - DISABLE instead of DELETE
+1 Much needed. Knut Berg
09:56 AM Bug report #20008: Very Slow Table Operations while the Table is Open
not sure if it is duplicate of #19771 Luigi Pirelli
09:47 AM Bug report #20023 (Closed): Qgis ver 3.2.3 can't install Semi Automatic Classification plugin
The SCP is a 3rd party plugin, issues with it or caused by it must be reported to the plugin author(s). Giovanni Manghi
09:47 AM Bug report #20023 (Closed): Qgis ver 3.2.3 can't install Semi Automatic Classification plugin
The SCP is a 3rd party plugin, issues with it or caused by it must be reported to the plugin author(s). Giovanni Manghi
09:22 AM Bug report #20023 (Closed): Qgis ver 3.2.3 can't install Semi Automatic Classification plugin
Qgis crashes when I try to install Semi automatic classification plugin
I'm sending two images.
The specs of my p...
Ioannis Faraslis
09:03 AM Bug report #20022 (Open): Polygon style: Simple line with offset
When using the 'Layer Properties - Symbology - Fill - Simple line' with a offset value (positive or negative), the li... Amanda Zwicky
07:59 AM Bug report #15305 (Closed): importing layers to MS SQL Server via browser drag & drop
Applied in changeset commit:qgis|b7f5a3c1ea1f158505db0ecf337dcbc63ee9ae95. Nyall Dawson
07:59 AM Bug report #15305 (Closed): importing layers to MS SQL Server via browser drag & drop
Applied in changeset commit:qgis|b7f5a3c1ea1f158505db0ecf337dcbc63ee9ae95. Nyall Dawson
05:53 AM Bug report #15305 (In Progress): importing layers to MS SQL Server via browser drag & drop
Nyall Dawson
06:50 AM Bug report #19988 (Feedback): Unable to save newly created vertices in MSSQL polyline in QGIS 3
I can't reproduce -- can you post more details and steps to reproduce this issue? Nyall Dawson
04:40 AM Feature request #20021 (Open): Print Layout missing Page Properties
Trying to change page properties in a layout there are no entries from a menu, tab or icon. Only solution is a right ... Lene Fischer
02:47 AM Bug report #20015 (Closed): qgis 3.3 master random selection does not work anymore
Applied in changeset commit:qgis|8cad2a6e16698d0dfcfc876d3ddd1cc9e2a0499b. Nyall Dawson
02:47 AM Bug report #20015 (Closed): qgis 3.3 master random selection does not work anymore
Applied in changeset commit:qgis|8cad2a6e16698d0dfcfc876d3ddd1cc9e2a0499b. Nyall Dawson
02:22 AM Bug report #20015 (In Progress): qgis 3.3 master random selection does not work anymore
Nyall Dawson

2018-10-04

01:44 AM Bug report #19980 (Closed): Copy and pasting part of style with geometry error
Yes, badly spelled the commit Denis Rouzaud
01:44 AM Bug report #19980 (Closed): Copy and pasting part of style with geometry error
Yes, badly spelled the commit Denis Rouzaud
01:08 AM Bug report #19980: Copy and pasting part of style with geometry error
Fixed? Nyall Dawson
01:36 AM Feature request #20019 (Open): Annotation display filtering via layers or map views
In complex maps, it would be great to be able to filter the display of specific annotations using layers (either exis... Eron Lloyd
01:25 AM Bug report #18373: Annotation Scaling
This is happening in QGIS 3.2.3 on macOS, as well. In 2.18.x, it seemed to work reliably in Windows, at least, but it... Eron Lloyd
10:58 PM Bug report #20007 (Closed): Substitutions don't play well with wrapped labels
Applied in changeset commit:qgis|234985b59d67e0741763ae32f6913b4c45f01ec4. Nyall Dawson
10:58 PM Bug report #20007 (Closed): Substitutions don't play well with wrapped labels
Applied in changeset commit:qgis|234985b59d67e0741763ae32f6913b4c45f01ec4. Nyall Dawson
05:14 AM Bug report #20007 (In Progress): Substitutions don't play well with wrapped labels
Nyall Dawson
10:44 PM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Alexey T wrote:
> Look what I found.
> All plugins are disabled.
> I have a large group of GeoTIff layers in my pr...
Giovanni Manghi
10:35 PM Bug report #20016: QGIS 3 is much less responsive than QGIS 2.18
Look what I found.
All plugins are disabled.
I have a large group of GeoTIff layers in my project.
When I disable ...
Alexey T
08:54 PM Bug report #20016 (Feedback): QGIS 3 is much less responsive than QGIS 2.18
You observe this regardless of the amount/type of data you have in the project? Can you test with a clean/new profile... Giovanni Manghi
08:54 PM Bug report #20016 (Feedback): QGIS 3 is much less responsive than QGIS 2.18
You observe this regardless of the amount/type of data you have in the project? Can you test with a clean/new profile... Giovanni Manghi
06:31 PM Bug report #20016 (Closed): QGIS 3 is much less responsive than QGIS 2.18
I have both QGis 3 and 2.18 installed.
Since version 3 UI has become very unresponsive and laggy. Looks like as it f...
Alexey T
10:43 PM Bug report #17124: Editing behavior of filtered layers is inconsistent
Antonio Viscomi wrote:
> In fact any change in snap tolerance setting don't solve the issues
this ticket isn't re...
Giovanni Manghi
09:25 PM Bug report #17124: Editing behavior of filtered layers is inconsistent
In fact any change in snap tolerance setting don't solve the issues
Antonio Viscomi
10:32 PM Bug report #20010: Abnormal RAM usage by geometry check
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > Antonio Viscomi wrote:
> > > Input file is huge but I can prov...
Antonio Viscomi
10:29 PM Bug report #20010: Abnormal RAM usage by geometry check
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > Input file is huge but I can provide it Tomorrow,
> > For set...
Antonio Viscomi
10:21 PM Bug report #20010: Abnormal RAM usage by geometry check
Ok the settings in Italian language are in screenshots attached
Thanks a lot
Antonio Viscomi
10:10 PM Bug report #20010: Abnormal RAM usage by geometry check
Antonio Viscomi wrote:
> Input file is huge but I can provide it Tomorrow,
> For settings in geometry checker how ...
Giovanni Manghi
09:58 PM Bug report #20010: Abnormal RAM usage by geometry check
Let me know how i can share settings Antonio Viscomi
09:57 PM Bug report #20010: Abnormal RAM usage by geometry check
Here are the data i tried to check
https://drive.google.com/file/d/16_PNEWJvXyU0gLig1AncZptZ4OVlCXM-/view?usp=sharing
Antonio Viscomi
09:35 PM Bug report #20010: Abnormal RAM usage by geometry check
Input file is huge but I can provide it Tomorrow,
For settings in geometry checker how should I can share them?
W...
Antonio Viscomi
08:50 PM Bug report #20010: Abnormal RAM usage by geometry check

> in previous version of QGIS 3 (but with only 16GB of ram) it worked fine (ram usage about 6-7GB)
same input fi...
Giovanni Manghi
04:38 PM Bug report #20010: Abnormal RAM usage by geometry check
Giovanni Manghi wrote:
> Why is tagged as a regression? You does not observe this leak in previous releases like 2.1...
Antonio Viscomi
04:06 PM Bug report #20010 (Feedback): Abnormal RAM usage by geometry check
Why is tagged as a regression? You does not observe this leak in previous releases like 2.18? Giovanni Manghi
07:36 AM Bug report #20010 (Closed): Abnormal RAM usage by geometry check
Hi all,
I must perform geometry check in a polygon layer...
I setup the checker than I observe a Ram usage of abou...
Antonio Viscomi
10:11 PM Bug report #19996 (Closed): edit vertex tool act on polygon layer during edit a point geometry
Closing because the main subject/issue of this ticket was fixed in master with https://github.com/qgis/QGIS/pull/6998... Giovanni Manghi
10:11 PM Bug report #19996 (Closed): edit vertex tool act on polygon layer during edit a point geometry
Closing because the main subject/issue of this ticket was fixed in master with https://github.com/qgis/QGIS/pull/6998... Giovanni Manghi
09:23 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Snap is a crap if is like a climb on a mirror Antonio Viscomi
09:21 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > is not only my problem apparently since someone has worked to d...
Antonio Viscomi
09:01 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> is not only my problem apparently since someone has worked to develop a function that would...
Giovanni Manghi
04:24 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
is not only my problem apparently since someone has worked to develop a function that would allow the choice (regardl... Antonio Viscomi
04:04 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> is was already merged, so it is already available in QGIS master AKA 3.3 AKA 3.4 in the works.
at this point w...
Giovanni Manghi
04:03 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> we hope that the request https://github.com/qgis/QGIS/pull/6998 is accepted but in the meantime this vision seems...
Giovanni Manghi
04:02 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
I'm not opposed to the changes but if them are there are fine for 'some'users there are also certainly millions of us... Antonio Viscomi
03:46 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
> A edit tool MAY act on only one layer at a time
I agree but not all of us did agree. But while I wrote it can ac...
Harrissou Santanna
03:46 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> so I remain of the assumption that this is a gigantic bug as well as being a maddening step...
Giovanni Manghi
03:43 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
so I remain of the assumption that this is a gigantic bug as well as being a maddening step backwards Antonio Viscomi
03:31 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Harrissou Santanna wrote:
> > If I may... I can see that the tolerance for point vector is...
Antonio Viscomi
03:30 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Harrissou Santanna wrote:
> > If I may... I can see that the tolerance for point vector is...
Antonio Viscomi
03:18 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Harrissou Santanna wrote:
> If I may... I can see that the tolerance for point vector is set at 0, meaning no snap. ...
Antonio Viscomi
02:49 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
If I may... I can see that the tolerance for point vector is set at 0, meaning no snap. I deduce that your vertex too... Harrissou Santanna
02:23 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> All the options are setting as default options both in mani as in sample project... The only difference is in fla...
Giovanni Manghi
01:56 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
*main instead of mani (sorry) Antonio Viscomi
01:44 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> > in addition, the only layer on which the snap is active is "intersect_geo_frane1"
>
>...
Antonio Viscomi
01:05 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> This is not a phylosophic question
> A vertex editor like this is only a regression
> it's just a waste of ti...
Giovanni Manghi
12:37 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> in addition, the only layer on which the snap is active is "intersect_geo_frane1"
in the project you attached...
Giovanni Manghi
12:35 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> if something works fine, it is not necessary to replace it
Important/big changes in QGIS are first proposed in...
Giovanni Manghi
12:32 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Antonio Viscomi wrote:
> > > Giovanni Manghi wrote:
> > > > >...
Antonio Viscomi
12:24 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Giovanni Manghi wrote:
> > > > maybe I can not make myself und...
Antonio Viscomi
12:20 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > > maybe I can not make myself understood
> >
> > no you have...
Antonio Viscomi
12:17 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> > maybe I can not make myself understood
>
> no you have. I think you are not understand...
Antonio Viscomi
12:07 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> maybe I can not make myself understood
no you have. I think you are not understanding what is going on here:
...
Giovanni Manghi
12:06 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> it can not depend on the snap if you change polygons vertex with a point editor (is a geometry type question)
...
Giovanni Manghi
12:03 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > > pity that my snapping is disabled
> >
> >
> > that you s...
Antonio Viscomi
12:02 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> > pity that my snapping is disabled
>
>
> that you show in the attached image is the G...
Antonio Viscomi
11:55 AM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> pity that my snapping is disabled
that you show in the attached image is the GENERAL (default) configuration...
Giovanni Manghi
11:53 AM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > > in attached file there are both data and project (with a clea...
Antonio Viscomi
11:37 AM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> > in attached file there are both data and project (with a clean user profile)... the bug i...
Antonio Viscomi
10:57 AM Bug report #19996 (Feedback): edit vertex tool act on polygon layer during edit a point geometry

> in attached file there are both data and project (with a clean user profile)... the bug is still present
The f...
Giovanni Manghi
10:57 AM Bug report #19996 (Feedback): edit vertex tool act on polygon layer during edit a point geometry

> in attached file there are both data and project (with a clean user profile)... the bug is still present
The f...
Giovanni Manghi
10:57 AM Bug report #19996 (Feedback): edit vertex tool act on polygon layer during edit a point geometry

> in attached file there are both data and project (with a clean user profile)... the bug is still present
The f...
Giovanni Manghi
09:40 PM Bug report #20000 (Open): Coordinate Capture plugin geographic coordinate issue
The subject of this ticket should be: Coordinate Capture plugin geographic coordinate issue Charles Clancy
10:06 AM Bug report #20000: Coordinate Capture plugin geographic coordinate issue

> Issue 2 is related to #13997, which I submitted in 2016. The behavior that I was writing about in #13997 is still...
Giovanni Manghi
09:23 PM Bug report #20005 (Closed): Fields to copy in 'Join attributes by field value' in processing mode...
Note that I also intend to add this in a Tokyo you on the setting, but for boring technical reasons this has to wait ... Nyall Dawson
09:23 PM Bug report #20005 (Closed): Fields to copy in 'Join attributes by field value' in processing mode...
Note that I also intend to add this in a Tokyo you on the setting, but for boring technical reasons this has to wait ... Nyall Dawson
08:48 PM Bug report #20005: Fields to copy in 'Join attributes by field value' in processing modeler only ...

> Would adding that piece of information to the doc here: https://github.com/qgis/QGIS-Documentation/blob/master/so...
Giovanni Manghi
05:31 PM Bug report #20005: Fields to copy in 'Join attributes by field value' in processing modeler only ...
Just tested the suggestion from Nyall and it functions as it should when using a ... David Todd
09:15 PM Bug report #20017 (Closed): Raster - Miscellaneous - Merge ECW images
No, you can't create ECW files. The ECW library/driver that is shipped with the OSGeo4W installer is read only. As fa... Giovanni Manghi
09:15 PM Bug report #20017 (Closed): Raster - Miscellaneous - Merge ECW images
No, you can't create ECW files. The ECW library/driver that is shipped with the OSGeo4W installer is read only. As fa... Giovanni Manghi
07:06 PM Bug report #20017 (Closed): Raster - Miscellaneous - Merge ECW images

QGIS version 3.2.1-Bonn
I have many ECW image tiles, and I want to combine them into one image (mosaic).
So wh...
ZHI JUN ZHU
08:53 PM Bug report #20015: qgis 3.3 master random selection does not work anymore
Confirmed on Linux too. Giovanni Manghi
08:53 PM Bug report #20015: qgis 3.3 master random selection does not work anymore
Confirmed on Linux too. Giovanni Manghi
05:56 PM Bug report #20015 (Closed): qgis 3.3 master random selection does not work anymore
it is not possible to insert any value !! salvatore fiandaca
08:45 PM Bug report #19971 (Closed): QGIS 3.3 MASTER dbmanager time execution query not present
Fixed in transifex Jürgen Fischer
08:45 PM Bug report #19971 (Closed): QGIS 3.3 MASTER dbmanager time execution query not present
Fixed in transifex Jürgen Fischer
07:32 PM Bug report #20018 (Feedback): Server and desktop too slow with Postgis views
If a layer is defined with a view or with sql, qgis issues a select distinct count of the id, I guess that it does th... Jesus Rodriguez Marcial
04:38 PM Bug report #19524: [macOS] Map canvas with wrong size on QGIS 3.2.1 start up
if necessary more info, confirmed on 3.2.3 on srtartup Luigi Pirelli
03:17 PM Bug report #20014 (Closed): WMS GetContext has multiple StyleList layers
On querying Qgis Server (qgs_mapserv.fcgi) 2.18.23 with a WMS GetContext, each Layer in the response contains several... Jean-Charles Billaud
01:41 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Casper Børgesen wrote:
> Giovanni Manghi wrote:
> > Have you tried on a clean profile?
>
> What do you mean by a...
Giovanni Manghi
01:39 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Have you tried on a clean profile?
What do you mean by a _clean profile_?
Casper Børgesen
10:35 AM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Casper Børgesen wrote:
> Giovanni Manghi wrote:
> > Just tested on master/linux and the operations as you show them...
Giovanni Manghi
12:15 PM Bug report #20013 (Feedback): Mars projection issue
Hello,
I recently encountered an issue on QGIS 3.2 and I don't find any solution or other thread on this subject.
...
Sylvain Breton
11:48 AM Bug report #20012 (Closed): QGIS 3.2 GRASS error
I found the error.
The parameter "Minimum size of exterior watershed basin" must be a positive value.
Lia Duarte
11:31 AM Bug report #20012 (Closed): QGIS 3.2 GRASS error
I have QGIS 3.2 in Windows 10 and when I run GRASS algorithms it gives me an error about "raster not found".
I acc...
Lia Duarte
11:44 AM Bug report #19992: Select tool switch on Pan tool
Giovanni Manghi wrote:
> > in my humble opinion anything acting on the main interface abnormally even if it or is no...
Antonio Viscomi
11:19 AM Bug report #19992: Select tool switch on Pan tool

> in my humble opinion anything acting on the main interface abnormally even if it or is not a direct problem of th...
Giovanni Manghi
11:02 AM Bug report #19992: Select tool switch on Pan tool
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > Antonio Viscomi wrote:
> > > dear Giovanni Manghi,
> > > user...
Antonio Viscomi
10:55 AM Bug report #19992: Select tool switch on Pan tool
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > dear Giovanni Manghi,
> > users, usually report and developers...
Antonio Viscomi
10:49 AM Bug report #19992 (Closed): Select tool switch on Pan tool
Antonio Viscomi wrote:
> dear Giovanni Manghi,
> users, usually report and developers investigate problems...
> y...
Giovanni Manghi
10:46 AM Bug report #19992 (Reopened): Select tool switch on Pan tool
dear Giovanni Manghi,
users, usually report and developers investigate problems...
you will never grow going like ...
Antonio Viscomi
10:39 AM Bug report #19992: Select tool switch on Pan tool
Giovanni Manghi wrote:
> > > today I've start to work with a new clean profile
> > > -I've reinstalled the plugins ...
Antonio Viscomi
10:19 AM Bug report #19992 (Closed): Select tool switch on Pan tool

> > today I've start to work with a new clean profile
> > -I've reinstalled the plugins approved and tested by you...
Giovanni Manghi
09:57 AM Bug report #19992: Select tool switch on Pan tool
Antonio Viscomi wrote:
> Hi Giovanni,
> today I've start to work with a new clean profile
> -I've reinstalled the ...
Antonio Viscomi
09:50 AM Bug report #19992 (Reopened): Select tool switch on Pan tool
Hi Giovanni,
today I've start to work with a new clean profile
-I've reinstalled the plugins approved and tested by...
Antonio Viscomi
09:50 AM Bug report #19992 (Reopened): Select tool switch on Pan tool
Hi Giovanni,
today I've start to work with a new clean profile
-I've reinstalled the plugins approved and tested by...
Antonio Viscomi
10:10 AM Bug report #20011 (Feedback): QGIS crashes when Check Geometries tool is run
Please try again with QGIS master (possibly on a clean/new profile). Giovanni Manghi
10:10 AM Bug report #20011 (Feedback): QGIS crashes when Check Geometries tool is run
Please try again with QGIS master (possibly on a clean/new profile). Giovanni Manghi
08:50 AM Bug report #20011 (Closed): QGIS crashes when Check Geometries tool is run
See attached screenshot of tool parameters and crash report. Eric Armitage
10:08 AM Bug report #20008: Very Slow Table Operations while the Table is Open
This is an issue that affects QGIS since LONG ago. In fact I'm pretty sure that there should be already a ticket abou... Giovanni Manghi
08:25 AM Bug report #19388 (Closed): Consistent crash with join layer
Applied in changeset commit:qgis|2609815cd134112489a3933461324c176cafcbe8. Anonymous
08:25 AM Bug report #19388 (Closed): Consistent crash with join layer
Applied in changeset commit:qgis|2609815cd134112489a3933461324c176cafcbe8. Anonymous

2018-10-03

01:29 AM Bug report #20000: Coordinate Capture plugin geographic coordinate issue
Issue 1 is now #20009
Issue 2 is related to #13997, which I submitted in 2016. The behavior that I was writing abo...
Charles Clancy
02:08 PM Bug report #20000 (Feedback): Coordinate Capture plugin geographic coordinate issue
Hi,
1) would be a feature request (arguably) for me
regarding 2) I'm not sure if I understand the issue: someth...
Giovanni Manghi
02:02 AM Bug report #20000 (Open): Coordinate Capture plugin geographic coordinate issue
I've observed a couple of issues with the Coordinate Capture plugin:
1) The geographic decimal degree readout needs ...
Charles Clancy
01:20 AM Feature request #20009 (Open): Coordinate capture plugin coordinate precision
The Coordinate Capture plugin is a nice tool, but it has an issue. The decimal geographic coordinate readout is only ... Charles Clancy
01:01 AM Bug report #19433 (Closed): "List of contour levels" field in GRASS r.contour is mandatory, shoul...
Fixed in master Nyall Dawson
01:01 AM Bug report #19433 (Closed): "List of contour levels" field in GRASS r.contour is mandatory, shoul...
Fixed in master Nyall Dawson
03:27 PM Bug report #19433: "List of contour levels" field in GRASS r.contour is mandatory, shouldn't be
amedeo fadini wrote:
> I've tried to changhe this line in python/plugins/processing/algs/grass7/description/r.contou...
Giovanni Manghi
12:25 AM Bug report #18266 (Closed): Browser panel does not show same folder icons in two different user p...
Should be fixed in master -- we use custom icons now. Nyall Dawson
12:25 AM Bug report #18266 (Closed): Browser panel does not show same folder icons in two different user p...
Should be fixed in master -- we use custom icons now. Nyall Dawson
10:52 PM Bug report #20008: Very Slow Table Operations while the Table is Open
confirmed on windows too with master three days ago... not checked current master Luigi Pirelli
10:38 PM Bug report #20008 (Closed): Very Slow Table Operations while the Table is Open
I'm working with a geopackage on ~530k features, and just about everything I try to do in the table takes way longer ... Kelley Jabr
10:19 PM Bug report #19936 (Closed): Split Features tool changing the attributes of the new feature on QGI...
Applied in changeset commit:qgis|e375d1ddd70f7ee66a415f3beb21a00844f7b044. Philipe Borba
10:19 PM Bug report #19936 (Closed): Split Features tool changing the attributes of the new feature on QGI...
Applied in changeset commit:qgis|e375d1ddd70f7ee66a415f3beb21a00844f7b044. Philipe Borba
10:16 PM Bug report #16759 (Closed): QGIS shows incomplete data when opening a .pbf/.osm file
Applied in changeset commit:qgis|f410b4a4da07463a25786045b107282dffabf1bd. Stephen Knox
10:16 PM Bug report #16759 (Closed): QGIS shows incomplete data when opening a .pbf/.osm file
Applied in changeset commit:qgis|f410b4a4da07463a25786045b107282dffabf1bd. Stephen Knox
10:09 PM Feature request #16503: Add tool to import vectors into MSSQL
Probably both are required Nyall Dawson
02:11 PM Feature request #16503: Add tool to import vectors into MSSQL
Nyall, are you thinking adding a new option in Processing for output types (a new "add to MS SQL table") or adding a ... Giovanni Manghi
10:08 PM Bug report #20005 (Feedback): Fields to copy in 'Join attributes by field value' in processing mo...
Try with a ; delimited list, no start our end brackets.
Eg
Field1;field2
Nyall Dawson
03:36 PM Bug report #20005 (Closed): Fields to copy in 'Join attributes by field value' in processing mode...
_What I am trying?_
* Join two layers and copy only certain fields from layer 2
* I am doing this in the processing...
Max Stephan
10:04 PM Bug report #20003 (Closed): restore the "precision" parameter in the"join attributes by location"...
This is a "won't fix". The setting in 2.x was extremely misleading in that it did not actually add an accuracy thresh... Nyall Dawson
10:04 PM Bug report #20003 (Closed): restore the "precision" parameter in the"join attributes by location"...
This is a "won't fix". The setting in 2.x was extremely misleading in that it did not actually add an accuracy thresh... Nyall Dawson
11:57 AM Bug report #20003 (Closed): restore the "precision" parameter in the"join attributes by location"...
On qgis 2.18 in Join attributes by location we can choice accuracy for spatial criteria, but since QGIS 3.0 I don't s... Ludovic JACQUET
09:15 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> > I hope this explain short screencast can explain
> >
> > many thanks for your patience...
Antonio Viscomi
07:58 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry

> I hope this explain short screencast can explain
>
> many thanks for your patience
yes is clearer now. Anyw...
Giovanni Manghi
06:17 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Giovanni Manghi wrote:
> > > Antonio Viscomi wrote:
> > > > A...
Antonio Viscomi
06:14 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > Antonio Viscomi wrote:
> > > Antonio Viscomi wrote:
> > > > G...
Antonio Viscomi
06:05 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> Antonio Viscomi wrote:
> > Antonio Viscomi wrote:
> > > Giovanni Manghi wrote:
> > > > I...
Antonio Viscomi
05:58 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Antonio Viscomi wrote:
> > Giovanni Manghi wrote:
> > > I cannot replicate but also I'm n...
Giovanni Manghi
05:58 PM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Giovanni Manghi wrote:
> > I cannot replicate but also I'm not really sure HOW replicate.
...
Antonio Viscomi
05:57 PM Bug report #19996 (Open): edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> I cannot replicate but also I'm not really sure HOW replicate.
> A project+data would real...
Antonio Viscomi
05:57 PM Bug report #19996 (Open): edit vertex tool act on polygon layer during edit a point geometry
Giovanni Manghi wrote:
> I cannot replicate but also I'm not really sure HOW replicate.
> A project+data would real...
Antonio Viscomi
03:02 PM Bug report #19996 (Feedback): edit vertex tool act on polygon layer during edit a point geometry
I cannot replicate but also I'm not really sure HOW replicate.
A project+data would really help, also a screencast w...
Giovanni Manghi
03:02 PM Bug report #19996 (Feedback): edit vertex tool act on polygon layer during edit a point geometry
I cannot replicate but also I'm not really sure HOW replicate.
A project+data would really help, also a screencast w...
Giovanni Manghi
09:50 AM Bug report #19996: edit vertex tool act on polygon layer during edit a point geometry
Antonio Viscomi wrote:
> Hi all,
> I've two layers in start editing (a point layer and a polygon layer)...
> well ...
Antonio Viscomi
08:32 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Just tested on master/linux and the operations as you show them in the screencast are basic...
Casper Børgesen
07:52 PM Bug report #19992 (Closed): Select tool switch on Pan tool
Giovanni Manghi
06:04 PM Bug report #19992: Select tool switch on Pan tool
Giovanni Manghi wrote:
> > I attached here a screenshot with all the pluin I've installed...
>
> the fact that y...
Antonio Viscomi
02:21 PM Bug report #19992: Select tool switch on Pan tool
> I attached here a screenshot with all the pluin I've installed...
the fact that you have "gdal tools" in the pl...
Giovanni Manghi
07:22 PM Bug report #19579: Crash on vector edit (that has the 4326 CRS) is reprojected in CRS 3857
Whoops. Thanks Giovanni. Got my regression definition switched up.
Thanks for all your help.
-Jacob
Jacob Farneth
02:36 PM Bug report #19579: Crash on vector edit (that has the 4326 CRS) is reprojected in CRS 3857
Jacob Farneth wrote:
> Hi Giovanni,
>
> I have now had a chance to test with 2.18. I do not believe I can replic...
Giovanni Manghi
07:09 PM Bug report #20007 (Closed): Substitutions don't play well with wrapped labels
To use substitutions and wordwrap expressions together in a label the user needs to configure the substitutions to in... Anita Graser
06:08 PM Bug report #19993 (Rejected): QGIS Crashed running Python code obtained form StackExchnge
I'm afraid there is nothing we can do, QGIS C++ is wrapped by SIP binding generator in such a way that you can easily... Alessandro Pasotti
06:08 PM Bug report #19993 (Rejected): QGIS Crashed running Python code obtained form StackExchnge
I'm afraid there is nothing we can do, QGIS C++ is wrapped by SIP binding generator in such a way that you can easily... Alessandro Pasotti
05:09 PM Bug report #20006 (Open): When using map_get() in expressions referencing multiple maps in print ...
h3. When exporting from a Layout with inset maps, these is unexpected behaviour concerning the use of the map_get fun... Robert Carey
05:05 PM Bug report #19999: Crash report
Byron Quesada wrote:
> The crash message appears when i try to create a new directory of maps in QGIS Desktop 3.2.3 ...
Giovanni Manghi
03:53 PM Bug report #19999: Crash report
The crash message appears when i try to create a new directory of maps in QGIS Desktop 3.2.3 with GRASS 7.4.1, after ... Byron Quesada
02:38 PM Bug report #19999 (Feedback): Crash report
Please add detailed steps (possibly with also a sample project and data) to allow us replicate the issue. Thanks. Giovanni Manghi
03:23 PM Bug report #19971: QGIS 3.3 MASTER dbmanager time execution query not present
See: https://github.com/qgis/QGIS/pull/8101 for some (mostly unrelated) issues Alessandro Pasotti
02:42 PM Bug report #19971: QGIS 3.3 MASTER dbmanager time execution query not present
btw, even if the translation was ok, there is still an error in the reported value ... I'm fixing it now. Alessandro Pasotti
02:13 PM Bug report #19971 (Open): QGIS 3.3 MASTER dbmanager time execution query not present
It's a bug in the italian translations:... Alessandro Pasotti
02:13 PM Bug report #19971 (Open): QGIS 3.3 MASTER dbmanager time execution query not present
It's a bug in the italian translations:... Alessandro Pasotti
02:13 PM Bug report #19971 (Open): QGIS 3.3 MASTER dbmanager time execution query not present
It's a bug in the italian translations:... Alessandro Pasotti
02:07 PM Bug report #19971: QGIS 3.3 MASTER dbmanager time execution query not present
also Ok here: master/kubuntu 18.04 Giovanni Manghi
12:23 PM Bug report #19971: QGIS 3.3 MASTER dbmanager time execution query not present
Alessandro Pasotti wrote:
> I cannot reproduce on linux, is it windows only?
I just checked into GNU / Linux Mint...
salvatore fiandaca
11:40 AM Bug report #19971 (Feedback): QGIS 3.3 MASTER dbmanager time execution query not present
I cannot reproduce on linux, is it windows only? Alessandro Pasotti
03:12 PM Bug report #19330: Provider Feature Filter Query Builder - CHANGES ATTRIBUTE VALUES
Olcay Ebcin wrote:
> Dear Nyall,
> Please find attached geopackage file.
> if you filter features as row_status=1 ...
Giovanni Manghi
03:12 PM Bug report #19330: Provider Feature Filter Query Builder - CHANGES ATTRIBUTE VALUES
Olcay Ebcin wrote:
> Dear Nyall,
> Please find attached geopackage file.
> if you filter features as row_status=1 ...
Giovanni Manghi
03:12 PM Bug report #19330: Provider Feature Filter Query Builder - CHANGES ATTRIBUTE VALUES
Olcay Ebcin wrote:
> Dear Nyall,
> Please find attached geopackage file.
> if you filter features as row_status=1 ...
Giovanni Manghi
02:43 PM Bug report #19989 (Open): QGIS crashes on Windows when loading and invalid KML file
Confirmed on master/windows 10. Giovanni Manghi
02:43 PM Bug report #19989 (Open): QGIS crashes on Windows when loading and invalid KML file
Confirmed on master/windows 10. Giovanni Manghi
02:43 PM Bug report #19989 (Open): QGIS crashes on Windows when loading and invalid KML file
Confirmed on master/windows 10. Giovanni Manghi
02:43 PM Bug report #19989 (Open): QGIS crashes on Windows when loading and invalid KML file
Confirmed on master/windows 10. Giovanni Manghi
02:19 PM Bug report #19974: QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> I can't change GPU
I didn't suggested to change your GPU, I just said that maybe is GPU r...
Giovanni Manghi
01:48 PM Bug report #20004 (Closed): Raster Warp(reproject) - reading in file path incorrectly
This is fixed in 3.2.3 Nyall Dawson
01:48 PM Bug report #20004 (Closed): Raster Warp(reproject) - reading in file path incorrectly
This is fixed in 3.2.3 Nyall Dawson
12:57 PM Bug report #20004 (Closed): Raster Warp(reproject) - reading in file path incorrectly
When I am reprojecting raster files using QGIS 3.2 the file pathways are being read into the GDAL/PGR command incorre... charlotte wheeler
12:50 PM Bug report #20001 (Feedback): "vector" menu is empty when QGIS is localized in Italian
I cannot reproduce on current master with italian locale, can you try the nightly build and check if the issue is sti... Alessandro Pasotti
12:07 PM Bug report #20001: "vector" menu is empty when QGIS is localized in Italian
I've seen this before, it is related with locale configuration and menu item translations ... Alessandro Pasotti
11:03 AM Bug report #20001 (Closed): "vector" menu is empty when QGIS is localized in Italian
Version: latest QGis 3.2.3 - When I select "Vettore" on the top of program, the window of commands doesn't open. I ca... marianna ronconi
12:28 PM Bug report #19940 (Feedback): Spatialite column with AUTOINCREMENT block with forms
I cannot reproduce on current master, can you share a project? Alessandro Pasotti
12:19 PM Bug report #19998: Cannot export output of 'Points along geometry' tool as Geopackage
I think it is related to #19708 and #19758 Andrea Giudiceandrea
11:39 AM Feature request #20002 (Open): Ability to save/load Composer Attribute Table attributes configura...
Let's say I have multiple layers with similar tables/fields and I would like to create one or more atlas with tables ... Andrea Ghensi
09:23 AM Bug report #19388: Consistent crash with join layer
Does anyone know any more about this issue yet? I've got to recommend QGIS to a client in a couple of weeks, for a pr... Dan Isaacs
07:56 AM Bug report #18622: Mouse pointer displacement
@Philippe, this ticket is about displacement, not size, what you need to check is if after a click the point/vertex i... Alessandro Pasotti

2018-10-02

01:08 AM Bug report #17024 (Closed): Identify Tool gives false hits for layers with spatial index (MS SQL)
Thanks for the confirmation! Nyall Dawson
01:08 AM Bug report #17024 (Closed): Identify Tool gives false hits for layers with spatial index (MS SQL)
Thanks for the confirmation! Nyall Dawson
12:05 AM Bug report #17024: Identify Tool gives false hits for layers with spatial index (MS SQL)
Issue no longer exists in QGIS 3. Damien Smith
10:33 PM Bug report #17024 (Feedback): Identify Tool gives false hits for layers with spatial index (MS SQL)
Please test with 3.2 and report if the issue still exists Nyall Dawson
12:55 AM Bug report #18622: Mouse pointer displacement
Alessandro Pasotti wrote:
> Can you please make this test?
>
> When digitizing, open the python console and type ...
Philipe Borba
12:12 AM Bug report #15218: MSSQL columns with default values not ignored
Confirmed issue has been fixed in QGIS 3.
Damien Smith
10:17 PM Bug report #15218 (Closed): MSSQL columns with default values not ignored
Closed due to lack of feedback Nyall Dawson
11:03 PM Bug report #19999 (Closed): Crash report

version :
QMetaObject::activate :
QWizard::subTitleFormat :
QWizard::next :
QMetaObject::activate :
QAbstractB...
Byron Quesada
10:42 PM Bug report #15404 (Feedback): Hang when compiling complex expressions for mssql provider
Still an issue with 3.2? Nyall Dawson
10:42 PM Bug report #15404 (Feedback): Hang when compiling complex expressions for mssql provider
Still an issue with 3.2? Nyall Dawson
10:41 PM Bug report #12923 (Feedback): Project with SQL Server Layers opens much slower in 2.8 than 2.6
Still an issue with 3.2? Nyall Dawson
10:41 PM Bug report #12923 (Feedback): Project with SQL Server Layers opens much slower in 2.8 than 2.6
Still an issue with 3.2? Nyall Dawson
10:40 PM Bug report #16190 (Feedback): Connection MSSQL (not localhost)
Is this still an issue with 3.2? I suspect it's just down to the difficult "magic" connection settings required for s... Nyall Dawson
10:40 PM Bug report #16190 (Feedback): Connection MSSQL (not localhost)
Is this still an issue with 3.2? I suspect it's just down to the difficult "magic" connection settings required for s... Nyall Dawson
10:37 PM Bug report #17423 (Feedback): QGIS select by expression mismatch with MSSQL layers
Can you provide a SQL dump of part of this layer? Nyall Dawson
10:33 PM Bug report #19293 (Closed): Incorrect working of the identification tool on the MSSQL layers
Actually this is a duplicate of #17024 Nyall Dawson
10:33 PM Bug report #19293 (Closed): Incorrect working of the identification tool on the MSSQL layers
Actually this is a duplicate of #17024 Nyall Dawson
10:32 PM Bug report #19293 (Feedback): Incorrect working of the identification tool on the MSSQL layers
Please test with 3.2 and report if the error still occurs Nyall Dawson
10:23 PM Bug report #19350 (Feedback): MS SQL Layers causing crashes
Should be fixed in 3.3 master - please test Nyall Dawson
10:21 PM Bug report #19455 (Feedback): Add MSSQL layer to canvas crashes QGIS3.2
Should be fixed in 3.3 master - please test Nyall Dawson
10:20 PM Bug report #19272 (Feedback): MSSQL Zooming Crash
Should be fixed in 3.3 master - please test Nyall Dawson
10:20 PM Bug report #19266 (Feedback): Crash when Open Attribute Table of a MSSQL layer
Should be fixed in 3.3 master - please test Nyall Dawson
10:19 PM Bug report #18486 (Feedback): QGIS 2.18 / 3.0 Crashes Zooming Layer from MS SQL database.
Should be fixed in 3.3 master - please test Nyall Dawson
10:18 PM Bug report #6381 (Closed): MSSQL tables - Primary Key with multiple columns Problem
Closing due to lack of feedback Nyall Dawson
10:18 PM Bug report #6381 (Closed): MSSQL tables - Primary Key with multiple columns Problem
Closing due to lack of feedback Nyall Dawson
08:54 PM Bug report #19330: Provider Feature Filter Query Builder - CHANGES ATTRIBUTE VALUES
Dear Nyall,
Please find attached geopackage file.
if you filter features as row_status=1 and identify or label feat...
Olcay Ebcin
03:06 AM Bug report #19330 (Feedback): Provider Feature Filter Query Builder - CHANGES ATTRIBUTE VALUES
Can you share the project/data? It's not possible to reproduce this without it. Nyall Dawson
08:52 PM Bug report #19989: QGIS crashes on Windows when loading and invalid KML file
Seems like there is a difference in behaviour between Linux and Windows versions of QGIS, in that some error conditio... Harry Clarke
10:26 AM Bug report #19989 (Feedback): QGIS crashes on Windows when loading and invalid KML file
No crash here on master/linux. The KML (a whopping 2.1GB one) does not load. The QGIS logs says it is an invalid KML,... Giovanni Manghi
10:26 AM Bug report #19989 (Feedback): QGIS crashes on Windows when loading and invalid KML file
No crash here on master/linux. The KML (a whopping 2.1GB one) does not load. The QGIS logs says it is an invalid KML,... Giovanni Manghi
10:26 AM Bug report #19989 (Feedback): QGIS crashes on Windows when loading and invalid KML file
No crash here on master/linux. The KML (a whopping 2.1GB one) does not load. The QGIS logs says it is an invalid KML,... Giovanni Manghi
05:09 PM Bug report #19579: Crash on vector edit (that has the 4326 CRS) is reprojected in CRS 3857
Hi Giovanni,
I have now had a chance to test with 2.18. I do not believe I can replicate with 2.18. Perhaps I've...
Jacob Farneth
03:39 PM Bug report #19761: Unable to close QGIS because of an (ghost?) active task
I guess some steps to reproduce would help... I haven't been able to.
Nyall Dawson
12:53 PM Bug report #19761 (Open): Unable to close QGIS because of an (ghost?) active task
Yes, right now!
Can you tell me the kind of information you need because I'm not sure I did something particular and...
Harrissou Santanna
03:39 PM Bug report #19995 (Feedback): Modeler issues with output and input
Please test with 3.4 nightlies -- there's been many related fixes. Nyall Dawson
01:11 PM Bug report #19995 (Closed): Modeler issues with output and input
Greetings
I'm trying to run a model and the output of an element doesn't get treated as an input.
I am using a ...
al ray
03:26 PM Bug report #19998 (Closed): Cannot export output of 'Points along geometry' tool as Geopackage
I have a polygon layer which I use as an input to the 'Points along geometry tool'. I produce a temporary layer which... James Duffy
01:54 PM Bug report #19997 (Open): Zoom from mac mousepad does not work
Zooming in does not really work from the trackpad. I have a macbook air.
This seems like a fundamental feature th...
ross bernet
01:48 PM Bug report #19994 (Feedback): *Crash ID*: a44e2a23c5f92aa1297b5d0c48103ea1e0ceb46b
Include a problem description and steps to reproduce the issue. Jürgen Fischer
12:54 PM Bug report #19994 (Closed): *Crash ID*: a44e2a23c5f92aa1297b5d0c48103ea1e0ceb46b
h2. User Feedback
h2. Report Details
*Crash ID*: a44e2a23c5f92aa1297b5d0c48103ea1e0ceb46b
*Stack Trace...
André SIMOES
01:38 PM Bug report #19996 (Closed): edit vertex tool act on polygon layer during edit a point geometry
Hi all,
I've two layers in start editing (a point layer and a polygon layer)...
well when I edit the point layer (a...
Antonio Viscomi
12:17 PM Bug report #19968 (Open): Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Just tested on master/linux and the operations as you show them in the screencast are basic...
Casper Børgesen
10:30 AM Bug report #19968 (Feedback): Very long loading times when opening the same FileGDB the second time
Just tested on master/linux and the operations as you show them in the screencast are basically instantaneous. Giovanni Manghi
12:06 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
@Giovanni. Which part, exactly?
On my local machine, the server tests at least.. are taking the environment variable...
Tudor Bărăscu
10:16 AM Bug report #18988: QGIS Server rendering different from Desktop rendering

> I just wanted to close it when I deactivated the parallel rendering on my desktop and it works now (ctest -R PyQg...
Giovanni Manghi
07:17 AM Bug report #18988: QGIS Server rendering different from Desktop rendering
It's the logical thing to do! Closing it now!
I just wanted to close it when I deactivated the parallel rendering ...
Tudor Bărăscu
11:50 AM Bug report #19990 (Closed): The Processing edit-in-place mode does not seem to identify layer units
Applied in changeset commit:qgis|57f77d01cb9adb4042fb66a0b953c2cb8a225bfa. Nyall Dawson
11:50 AM Bug report #19990 (Closed): The Processing edit-in-place mode does not seem to identify layer units
Applied in changeset commit:qgis|57f77d01cb9adb4042fb66a0b953c2cb8a225bfa. Nyall Dawson
06:16 AM Bug report #19990 (In Progress): The Processing edit-in-place mode does not seem to identify laye...
Nyall Dawson
11:42 AM Bug report #19992: Select tool switch on Pan tool
Antonio Viscomi wrote:
> Nyall Dawson wrote:
> > Perhaps it's plugin related?
>
> which plugin could it affect h...
Antonio Viscomi
11:24 AM Bug report #19992: Select tool switch on Pan tool
Nyall Dawson wrote:
> Perhaps it's plugin related?
which plugin could it affect hold of native core tool?
Antonio Viscomi
11:19 AM Bug report #19992: Select tool switch on Pan tool
Perhaps it's plugin related? Nyall Dawson
10:41 AM Bug report #19992: Select tool switch on Pan tool
Giovanni Manghi wrote:
> Cannot confirm here on master/linux.
I confirm this bug also in master 80723e89fd on Windo...
Antonio Viscomi
10:05 AM Bug report #19992 (Feedback): Select tool switch on Pan tool
Cannot confirm here on master/linux. Giovanni Manghi
10:05 AM Bug report #19992 (Feedback): Select tool switch on Pan tool
Cannot confirm here on master/linux. Giovanni Manghi
09:48 AM Bug report #19992 (Closed): Select tool switch on Pan tool
Hi all,
I noticed that:
when I switch from the active layer to another in TOC,
the "Select tool" I've previously c...
Antonio Viscomi
11:34 AM Bug report #19993 (Rejected): QGIS Crashed running Python code obtained form StackExchnge
This was the code that caused the crash:... Thomas Kibbey
11:01 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
I tried to change drivers but it's doesn't worked. Timur Aptikeev
10:58 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
I can't change GPU Timur Aptikeev
10:56 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
Giovanni Manghi wrote:
> Timur Aptikeev wrote:
> > This problem only this PC !!!
>
> local issue then, maybe gra...
Timur Aptikeev
10:20 AM Bug report #19974 (Open): QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> This problem only this PC !!!
local issue then, maybe graphic card related(?).
Giovanni Manghi
10:20 AM Bug report #19974 (Open): QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> This problem only this PC !!!
local issue then, maybe graphic card related(?).
Giovanni Manghi
10:20 AM Bug report #19974 (Open): QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> This problem only this PC !!!
local issue then, maybe graphic card related(?).
Giovanni Manghi
10:20 AM Bug report #19974 (Open): QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> This problem only this PC !!!
local issue then, maybe graphic card related(?).
Giovanni Manghi
06:05 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"

This problem only this PC !!!
Timur Aptikeev
06:03 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
I have this PC
CPU-Z - Текстовый отчет
-------------------------------------------------------------------------
...
Timur Aptikeev
05:56 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
Giovanni Manghi wrote:
> Timur Aptikeev wrote:
> > Giovanni Manghi wrote:
> > > Regardless of the data you loaded ...
Timur Aptikeev
10:21 AM Bug report #19271 (Feedback): Crash on SQL queries - virtual layers
Giovanni Manghi
10:21 AM Bug report #19985: QGIS crashes when using the georeferencer
Have also a try on QGIS 3.* Giovanni Manghi
10:21 AM Bug report #19985: QGIS crashes when using the georeferencer
Have also a try on QGIS 3.* Giovanni Manghi
09:39 AM Bug report #19991 (Feedback): QGIS crash on exit
Create a clean/new profile (no 3rd party plugins or legacy configurations), restart qgis, try again. Giovanni Manghi
09:39 AM Bug report #19991 (Feedback): QGIS crash on exit
Create a clean/new profile (no 3rd party plugins or legacy configurations), restart qgis, try again. Giovanni Manghi
09:39 AM Bug report #19991 (Feedback): QGIS crash on exit
Create a clean/new profile (no 3rd party plugins or legacy configurations), restart qgis, try again. Giovanni Manghi
06:04 AM Bug report #18958 (Closed): Weird character at the end of Project --> Open from --> PostgreSQL me...
Yes - it was fixed Nyall Dawson
06:04 AM Bug report #18958 (Closed): Weird character at the end of Project --> Open from --> PostgreSQL me...
Yes - it was fixed Nyall Dawson

2018-10-01

01:50 AM Bug report #19985: QGIS crashes when using the georeferencer
Giovanni Manghi wrote:
> The screenshot is about the Georeferencer: does the crash happen only when using this tool?...
Алексей Житников
05:49 PM Bug report #19985: QGIS crashes when using the georeferencer
The screenshot is about the Georeferencer: does the crash happen only when using this tool? only with a specific data... Giovanni Manghi
05:48 PM Bug report #19985 (Feedback): QGIS crashes when using the georeferencer
QGIS 2.14 is not supported anymore.
Regarding 2.18: please try using a clean installation, for example try by dele...
Giovanni Manghi
05:48 PM Bug report #19985 (Feedback): QGIS crashes when using the georeferencer
QGIS 2.14 is not supported anymore.
Regarding 2.18: please try using a clean installation, for example try by dele...
Giovanni Manghi
05:48 PM Bug report #19985 (Feedback): QGIS crashes when using the georeferencer
QGIS 2.14 is not supported anymore.
Regarding 2.18: please try using a clean installation, for example try by dele...
Giovanni Manghi
05:48 PM Bug report #19985 (Feedback): QGIS crashes when using the georeferencer
QGIS 2.14 is not supported anymore.
Regarding 2.18: please try using a clean installation, for example try by dele...
Giovanni Manghi
08:23 AM Bug report #19985 (Closed): QGIS crashes when using the georeferencer
Good afternoon.
The problem is that in QGIS 2.14.22 when attaching a raster to a given layer, the error qgis-ltr-bin...
Алексей Житников
01:22 AM Bug report #19271: Crash on SQL queries - virtual layers
I can't reproduce a crash on the queries flagged, although they don't work, but that isn't surprising since they don'... Stephen Knox
10:42 PM Feature request #16252: SDO_DIMNAME values QGIS Oracle Data Provider
@Jürgen Fischer
Are there any plans to fix this issue?
Lukas Künzel
09:37 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
Hi Tudor,... Paul Blottiere
08:49 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
Installed on a new VM with Debian Buster, I cannot replicate at all, same packages same CmakeCache.txt file .. same c... Tudor Bărăscu
07:08 PM Bug report #19991 (Closed): QGIS crash on exit
As I clicked the X to close out of QGIS, it crashed. It also crashes at various times while using the program, but t... Kevin Rhodes
06:31 PM Bug report #19990 (Closed): The Processing edit-in-place mode does not seem to identify layer units
In the attached screenshot, the same alg for the same layer in both edit and normal mode: in the normal mode, units a... Harrissou Santanna
05:51 PM Bug report #19974: QGIS crashes when opening "New 3D Map View"
Timur Aptikeev wrote:
> Giovanni Manghi wrote:
> > Regardless of the data you loaded in the project? does it happen...
Giovanni Manghi
11:54 AM Bug report #19974: QGIS crashes when opening "New 3D Map View"
Giovanni Manghi wrote:
> Regardless of the data you loaded in the project? does it happen with a new/clean profile?
...
Timur Aptikeev
05:46 PM Feature request #19784 (Open): make the "Delete Ring" Tool work also by clicking on the ring boun...
Giovanni Manghi
10:34 AM Feature request #19784: make the "Delete Ring" Tool work also by clicking on the ring boundaries
Harrissou Santanna wrote:
> Meanwhile, Tom, another workaround can be to draw a rough polygon that covers the ring b...
Tom na
05:41 PM Bug report #18958: Weird character at the end of Project --> Open from --> PostgreSQL menu title
Think this can be closed now - can't see any evidence of this at all Stephen Knox
05:12 PM Feature request #19832: Delete layers/files rather than remove
Alessandro Pasotti wrote:
> Tom, when we say "browser" we mean the QGIS internal browser dock widget (usually show i...
Tom na
10:32 AM Feature request #19832: Delete layers/files rather than remove
Tom, when we say "browser" we mean the QGIS internal browser dock widget (usually show in the top left corner of the ... Alessandro Pasotti
10:28 AM Feature request #19832 (Reopened): Delete layers/files rather than remove
I can't edit the existing ticket, but I was referring to the QGIS Desktop application and not having to use browser o... Tom na
05:12 PM Bug report #19983 (Closed): [edit-in-place] - clip do not work
Yes. Sorry For the noise... Jan Lippmann
06:21 AM Bug report #19983: [edit-in-place] - clip do not work
Hi Jan,
Did you receive my email regarding this?
Nyall Dawson
03:30 PM Bug report #19861: Browser: Impossible to delete GeoPackage table if the path has accents
The same bug is also occurring with master (3.3, rev. 3032af2dcc) Jérôme Guélat
03:21 PM Bug report #19433: "List of contour levels" field in GRASS r.contour is mandatory, shouldn't be
I've tried to changhe this line in python/plugins/processing/algs/grass7/description/r.contour.txt
From:

...
amedeo fadini
10:12 AM Bug report #19433: "List of contour levels" field in GRASS r.contour is mandatory, shouldn't be
Michel Gouédard wrote:
> Hi,
>
> When starting r.contour from the GRASS group on a raster with "Increment between...
amedeo fadini
03:05 PM Bug report #19989 (Closed): QGIS crashes on Windows when loading and invalid KML file
h2. User Feedback
Trying to load KML layer for
National Forest Inventory Woodland England
File downloaded from...
Harry Clarke
01:37 PM Bug report #19988 (Closed): Unable to save newly created vertices in MSSQL polyline in QGIS 3
An error is thrown in QIGS 3.2.2. when trying to save geometri changes to MSSQL polylines.
The issue only occurs whe...
Victor Olsen
12:32 PM Bug report #19981 (Closed): Value relation, value 0 = NULL
Applied in changeset commit:qgis|6574e69292edfa5c5c516df0d28c72c626388850. Anonymous
12:32 PM Bug report #19981 (Closed): Value relation, value 0 = NULL
Applied in changeset commit:qgis|6574e69292edfa5c5c516df0d28c72c626388850. Anonymous
08:23 AM Bug report #19981: Value relation, value 0 = NULL
Thanks for the report and the test project, I'll have a look ASAP! Alessandro Pasotti
08:20 AM Bug report #19981: Value relation, value 0 = NULL
Sure, i have exported two tables into a geopackage (originally from postgres). One polygon layer as well as a layer w... Casper Bertelsen
12:09 PM Bug report #19984 (Closed): opencl warnings when building on ubuntu 'cosmic' 18.10
Applied in changeset commit:qgis|9244d3fd678acd81de44ab6bfee6a346edf26af4. Anonymous
12:09 PM Bug report #19984 (Closed): opencl warnings when building on ubuntu 'cosmic' 18.10
Applied in changeset commit:qgis|9244d3fd678acd81de44ab6bfee6a346edf26af4. Anonymous
09:01 AM Bug report #19984 (In Progress): opencl warnings when building on ubuntu 'cosmic' 18.10
https://github.com/qgis/QGIS/pull/8077 Alessandro Pasotti
04:28 AM Bug report #19984 (Closed): opencl warnings when building on ubuntu 'cosmic' 18.10
When building QGIS with OpenCL enabled on ubuntu 'cosmic' 18.10, this warning gets repeated a number of times:
<pr...
Mathieu Pellerin - nIRV
11:20 AM Bug report #18477: QGIS 3 "unable to save auxiliary storage"
I did not succeed in reproducing the error, so I opened a PR in order to add a more explicit message: https://github.... Paul Blottiere
11:12 AM Bug report #19987 (Closed): Anchor point legend not firmly anchored in template
I created the following layout templates with legends:
- Legend in the upper-right corner.
- Anchor point in the...
Gert Jan Pieterse
10:49 AM Bug report #19930 (Closed): "Zoom to feature" does not work
commit:b395488b4f0230e3fe849200f9b76aee395f53c5 Alessandro Pasotti
10:49 AM Bug report #19930 (Closed): "Zoom to feature" does not work
commit:b395488b4f0230e3fe849200f9b76aee395f53c5 Alessandro Pasotti
10:33 AM Bug report #19986 (Open): Obsolete VC redist version installed
Qgis keeps on installing VC redistributable version 9.0.30729.17, regardless whether a newer version of VC++ 2008 (9.... Yogurt Yogurt
09:56 AM Bug report #19966: Cyrillic symbols in QGIS Server
Alessandro Pasotti wrote:
> Try setting QT_QPA_FONTDIR env var to a folder that contains your fonts, for instance: /...
Alexander Novikov
08:47 AM Bug report #19589 (Closed): Not possible to save style to non-spatial layers in PostGIS
Applied in changeset commit:qgis|bb0c62935562ebe28a0d862e4bdf985865bde595. Martin Dobias
08:47 AM Bug report #19589 (Closed): Not possible to save style to non-spatial layers in PostGIS
Applied in changeset commit:qgis|bb0c62935562ebe28a0d862e4bdf985865bde595. Martin Dobias
08:32 AM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> yes please.
I have uploaded a short video to youtube where you can see whats happening i...
Casper Børgesen
08:19 AM Bug report #18260 (Closed): qgis 3 crashes at start
Applied in changeset commit:qgis|5508ea036eea095adcb7bb0bda943dfd52a3cd66. Nyall Dawson
08:19 AM Bug report #18260 (Closed): qgis 3 crashes at start
Applied in changeset commit:qgis|5508ea036eea095adcb7bb0bda943dfd52a3cd66. Nyall Dawson
08:07 AM Bug report #19979 (Closed): Data defined label does not works anymore in combinaison with rule ba...
Applied in changeset commit:qgis|0e2ceb90fe3c4816a71fa681d28a351fdff9c7ab. Nyall Dawson
08:07 AM Bug report #19979 (Closed): Data defined label does not works anymore in combinaison with rule ba...
Applied in changeset commit:qgis|0e2ceb90fe3c4816a71fa681d28a351fdff9c7ab. Nyall Dawson
06:14 AM Bug report #19979 (In Progress): Data defined label does not works anymore in combinaison with ru...
Nyall Dawson
07:10 AM Bug report #19931: The "iterate over this layer" button is missing for the "Extract selected feat...
Well, making it working is non-trivial, to say the least. I can "fix" it and re-add the button, but it'll continue to... Nyall Dawson
06:58 AM Bug report #19931: The "iterate over this layer" button is missing for the "Extract selected feat...
I'm not sure I understand: in 2.18, the tool would be buggy so it should not be ported and fixed in 3.x?
The quest...
Harrissou Santanna
06:41 AM Bug report #19931 (Rejected): The "iterate over this layer" button is missing for the "Extract se...
I've looked into this -- while the button exists in 2.18, it has absolutely no meaning. In iterating mode a temporary... Nyall Dawson
06:41 AM Bug report #19931 (Rejected): The "iterate over this layer" button is missing for the "Extract se...
I've looked into this -- while the button exists in 2.18, it has absolutely no meaning. In iterating mode a temporary... Nyall Dawson
06:25 AM Bug report #19931 (In Progress): The "iterate over this layer" button is missing for the "Extract...
Nyall Dawson
06:46 AM Bug report #19761 (Feedback): Unable to close QGIS because of an (ghost?) active task
Can you reproduce this? I need some more info here. Nyall Dawson
06:40 AM Bug report #19982: "Save scratch layer" does not use same dialog as "save vector layer": very few...
Oh yeah, you are right, I forgot that aspect of the features. Users Doc might need some precision on this I think.
S...
Harrissou Santanna
06:16 AM Bug report #19836 (Closed): QgsProcessingParameterMultipleLayers unreliable order in processing m...
Applied in changeset commit:qgis|ee4afe2db1fdeb4480a10028fa7a77aab8ef1596. Anonymous
06:16 AM Bug report #19836 (Closed): QgsProcessingParameterMultipleLayers unreliable order in processing m...
Applied in changeset commit:qgis|ee4afe2db1fdeb4480a10028fa7a77aab8ef1596. Anonymous

2018-09-30

10:18 PM Bug report #19982 (Closed): "Save scratch layer" does not use same dialog as "save vector layer":...
This is by design - any option which changes the structure of the nature is hidden, because the layer is swapped in p... Nyall Dawson
10:18 PM Bug report #19982 (Closed): "Save scratch layer" does not use same dialog as "save vector layer":...
This is by design - any option which changes the structure of the nature is hidden, because the layer is swapped in p... Nyall Dawson
04:41 PM Bug report #19982 (Closed): "Save scratch layer" does not use same dialog as "save vector layer":...
Add a temporary scratch layer
Click the icon next to it in order to save it on disk. The "Save scratch layer" dialog...
Harrissou Santanna
09:34 PM Bug report #19981 (Feedback): Value relation, value 0 = NULL
Giovanni Manghi
11:38 AM Bug report #19981: Value relation, value 0 = NULL
It would be great if you could attach a minimal project to reproduce the issue. Alessandro Pasotti
10:43 AM Bug report #19981 (Closed): Value relation, value 0 = NULL
I have a value of 0 in a column of data type integer.
The column is set to widget type "Value relation", relating ...
Casper Bertelsen
07:44 PM Bug report #19983: [edit-in-place] - clip do not work
7z archiv includes a gif animation of what i do...edit-in-place.gif Jan Lippmann
07:38 PM Bug report #19983 (Closed): [edit-in-place] - clip do not work
hello,
i try to clip a polygon with another, but the clip alg in "edit in place" mode do nothing.
make i somet...
Jan Lippmann
03:55 PM Bug report #1963: "Ghost Lines" when using Anti-aliasing, polygons with shared boundaries, and no...
I don't think so, it was either on IRC or Twitter.
This issue remains, please keep it opened. The workaround is ju...
Johannes Kroeger
02:49 PM Bug report #18434: QGIS 3.0 new node tool picks up nodes of hidden layers & isn;t constrained by ...
It has nothing to do with snapping, it's about picking up vertices for editing. Another words:
Vertex Tool (All La...
Borys Jurgiel
02:49 PM Bug report #18434: QGIS 3.0 new node tool picks up nodes of hidden layers & isn;t constrained by ...
It has nothing to do with snapping, it's about picking up vertices for editing. Another words:
Vertex Tool (All La...
Borys Jurgiel
02:49 PM Bug report #18434: QGIS 3.0 new node tool picks up nodes of hidden layers & isn;t constrained by ...
It has nothing to do with snapping, it's about picking up vertices for editing. Another words:
Vertex Tool (All La...
Borys Jurgiel
02:46 AM Bug report #16759: QGIS shows incomplete data when opening a .pbf/.osm file
Please see proposed pull request here (https://github.com/qgis/QGIS/pull/8067), and I also attach a screen shot post ... Stephen Knox

2018-09-29

12:30 AM Bug report #19934 (Closed): QGIS 3.2 processing scripts not updated when saved / crash when tryin...
Applied in changeset commit:qgis|a0292c3ff37d0a8007ab17b55876bb7190c46691. Nyall Dawson
12:30 AM Bug report #19934 (Closed): QGIS 3.2 processing scripts not updated when saved / crash when tryin...
Applied in changeset commit:qgis|a0292c3ff37d0a8007ab17b55876bb7190c46691. Nyall Dawson
07:23 PM Bug report #16858: Python error:RuntimeError: wrapped C/C++ object of type SnapGeometriesToLayer ...
I just had this happen with https://github.com/root676/QNEAT3/issues/8
Is there no way to catch these? I feel that...
Johannes Kroeger
01:33 PM Bug report #19762 (Closed): QgsApplication.setMaxThreads not work appropriately
Francisco Raga wrote:
> Yes ,I know,but it doesn't work , When I put -1 , it doesn't check the QComboBox and doesn't...
Jürgen Fischer
01:33 PM Bug report #19762 (Closed): QgsApplication.setMaxThreads not work appropriately
Francisco Raga wrote:
> Yes ,I know,but it doesn't work , When I put -1 , it doesn't check the QComboBox and doesn't...
Jürgen Fischer
12:15 PM Bug report #19762: QgsApplication.setMaxThreads not work appropriately
Jürgen Fischer wrote:
> Francisco Raga wrote:
> > Jürgen Fischer wrote:
> > > How is that different from the quote...
Francisco Raga
12:15 PM Bug report #19762: QgsApplication.setMaxThreads not work appropriately
Jürgen Fischer wrote:
> Francisco Raga wrote:
> > Jürgen Fischer wrote:
> > > How is that different from the quote...
Francisco Raga
12:15 PM Bug report #19762: QgsApplication.setMaxThreads not work appropriately
Jürgen Fischer wrote:
> Francisco Raga wrote:
> > Jürgen Fischer wrote:
> > > How is that different from the quote...
Francisco Raga
09:18 AM Bug report #19762: QgsApplication.setMaxThreads not work appropriately
Francisco Raga wrote:
> Jürgen Fischer wrote:
> > How is that different from the quoted code?
>
> then -1 set ma...
Jürgen Fischer
10:51 AM Bug report #18988: QGIS Server rendering different from Desktop rendering
I cannot replicate under ubuntu 18.04 but I installed another system with debian Buster (testing) and it's the same.
...
Tudor Bărăscu
09:40 AM Bug report #19980 (Closed): Copy and pasting part of style with geometry error
With the new addition to copy and paste part of style by Denis, it always gives an error of geometry mismatch between... Saber Razmjooei

2018-09-28

11:43 PM Bug report #19979 (Closed): Data defined label does not works anymore in combinaison with rule ba...
Please find in attachement a simple project that illustrate the issue : trying moving a label does not works.
The ...
Dominique Lyszczarz
11:37 PM Bug report #19973 (Closed): QGIS 3.3 master delete duplicate geometries does not work
Applied in changeset commit:qgis|9698444f4af4712cb4a6508c839c014fa0b335e1. Nyall Dawson
11:37 PM Bug report #19973 (Closed): QGIS 3.3 master delete duplicate geometries does not work
Applied in changeset commit:qgis|9698444f4af4712cb4a6508c839c014fa0b335e1. Nyall Dawson
02:40 PM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
Nyall Dawson wrote:
> How's "Execution completed in 0.18 seconds" sound?
wow, it sounds great
thank you
salvatore fiandaca
05:49 AM Bug report #19973 (In Progress): QGIS 3.3 master delete duplicate geometries does not work
https://github.com/qgis/QGIS/pull/8047/files Nyall Dawson
05:34 AM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
How's "Execution completed in 0.18 seconds" sound? Nyall Dawson
05:02 AM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
(For reference -- there's a dedicated, optimised, 'remove duplicate vertices' algorithm which may be of use here) Nyall Dawson
04:58 AM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
Not a regression - the algorithm is just extremely inefficient and doesn't scale for large layers (it compares EVERY ... Nyall Dawson
03:50 AM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
On my system, core i5-460M, 8 GB RAM, Windows 7 64 bit:
vertices extracted: 5629 points
running "delete duplica...
Andrea Giudiceandrea
10:03 PM Bug report #18988 (Open): QGIS Server rendering different from Desktop rendering
Hi Paul. With the current master all the getmap request for that specific labeling layer are freezing. I created a ... Tudor Bărăscu
10:33 AM Bug report #18988: QGIS Server rendering different from Desktop rendering
I just build the master from the beginning and I cannot even get an image.. the server freezes at your example reques... Tudor Bărăscu
09:10 PM Bug report #19969: GDAL_contour not found

> I read further into the install notes, and it looks like this version does not find external tools. I shouldn't h...
Giovanni Manghi
08:38 PM Bug report #19969: GDAL_contour not found
Giovanni Manghi wrote:
> Nicole Morgan wrote:
> > Johannes Kroeger wrote:
> > > How exactly did you install QGIS a...
Nicole Morgan
05:15 PM Bug report #19969: GDAL_contour not found
Nicole Morgan wrote:
> Johannes Kroeger wrote:
> > How exactly did you install QGIS and did you modify anything dur...
Giovanni Manghi
05:27 PM Bug report #19945 (Closed): ogr based tools cannot output anymore to temp files
Cannot replicate anymore... weird, I didn't even updated master since I reported this. Giovanni Manghi
05:27 PM Bug report #19945 (Closed): ogr based tools cannot output anymore to temp files
Cannot replicate anymore... weird, I didn't even updated master since I reported this. Giovanni Manghi
04:30 AM Bug report #19945 (Feedback): ogr based tools cannot output anymore to temp files
I can't reproduce -- can you post steps to reproduce? Can you create folders under tmp? Nyall Dawson
05:21 PM Bug report #19966: Cyrillic symbols in QGIS Server
Try setting QT_QPA_FONTDIR env var to a folder that contains your fonts, for instance: /usr/share/fonts/truetype/ Alessandro Pasotti
05:10 PM Bug report #19974 (Feedback): QGIS crashes when opening "New 3D Map View"
Regardless of the data you loaded in the project? does it happen with a new/clean profile? Giovanni Manghi
07:06 AM Bug report #19974 (Closed): QGIS crashes when opening "New 3D Map View"
h2. User Feedback
h2. Report Details
*Crash ID*: 68bf4581be50f55e6e74853b53033b18edb52eb3
*Stack Trace...
Timur Aptikeev
05:08 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Casper Børgesen wrote:
> Giovanni Manghi wrote:
> > Does it work differently in QGIS 2.18?
>
> I have just tried...
Giovanni Manghi
05:08 PM Bug report #19968: Very long loading times when opening the same FileGDB the second time
Casper Børgesen wrote:
> Giovanni Manghi wrote:
> > Does it work differently in QGIS 2.18?
>
> I have just tried...
Giovanni Manghi
11:24 AM Bug report #19968 (Open): Very long loading times when opening the same FileGDB the second time
Giovanni Manghi wrote:
> Does it work differently in QGIS 2.18?
I have just tried on the two machines and QGIS 2....
Casper Børgesen
05:06 PM Bug report #19906 (Closed): GetMap request with line in the SLD does not output the line in the r...
Applied in changeset commit:qgis|f74f78557d9b18484afa44263f2c4e79f581ab0f. Paul Blottiere
05:06 PM Bug report #19906 (Closed): GetMap request with line in the SLD does not output the line in the r...
Applied in changeset commit:qgis|f74f78557d9b18484afa44263f2c4e79f581ab0f. Paul Blottiere
04:22 PM Bug report #19762: QgsApplication.setMaxThreads not work appropriately
Jürgen Fischer wrote:
> How is that different from the quoted code?
then -1 set max thread if we see the API and ...
Francisco Raga
03:58 PM Feature request #19978 (Open): 'DWG/DXF-Import' - Missing text
When importing files from the Austrian cadastre some text (e.g. 'Grundstücksnummern') is missing.
(See also: http:...
R. R.
03:44 PM Feature request #19977 (Open): setting in QGIS to have plugins automatically upgrade in background
many users I set QGIS up for have to be continually reminded to check for plugin upgrades. Would be better for non-po... Rob Willson
03:43 PM Bug report #19976 (Closed): 'DWG/DXF-Import' - encoding option missing
Please add an option to select the encoding when importing DWG/DXF files. R. R.
01:43 PM Bug report #19975: crash when enabling drop shadow on label background svg
This only happens when the path to the SVG file is data-defined. Sebastian Brocks
01:38 PM Bug report #19975 (Open): crash when enabling drop shadow on label background svg
h2. User Feedback
When I enable a drop shadow effect on a label background loaded from SVG, QGIS crashes
h2. Re...
Sebastian Brocks
11:08 AM Bug report #19930 (In Progress): "Zoom to feature" does not work
https://github.com/qgis/QGIS/pull/8052 Alessandro Pasotti
11:08 AM Bug report #19930 (In Progress): "Zoom to feature" does not work
https://github.com/qgis/QGIS/pull/8052 Alessandro Pasotti
08:19 AM Bug report #19953: Labeling: Halo-effect only works with 1mm setting
Good question, mostly I work with Halo.
So I just tried to set decimal values for a background rectangle. In the siz...
Magdalena Blank
08:19 AM Bug report #19953: Labeling: Halo-effect only works with 1mm setting
Good question, mostly I work with Halo.
So I just tried to set decimal values for a background rectangle. In the siz...
Magdalena Blank
04:59 AM Bug report #19953 (Feedback): Labeling: Halo-effect only works with 1mm setting
Is the problem here that you cannot enter decimal values in ANY spin box? Nyall Dawson
07:26 AM Bug report #19934: QGIS 3.2 processing scripts not updated when saved / crash when trying process...
I suspect the crash reported here has already been fixed -- it was likely a crash caused by having a processing algor... Nyall Dawson
06:25 AM Bug report #19938 (Closed): GDAL/OGR vector geoprocessing algorithms not working with GPKG, SQLit...
Applied in changeset commit:qgis|737ab3069a6ce279a3ddb7f9df38baed481c10f5. Nyall Dawson
06:25 AM Bug report #19938 (Closed): GDAL/OGR vector geoprocessing algorithms not working with GPKG, SQLit...
Applied in changeset commit:qgis|737ab3069a6ce279a3ddb7f9df38baed481c10f5. Nyall Dawson
02:53 AM Bug report #19938: GDAL/OGR vector geoprocessing algorithms not working with GPKG, SQLite, FileGD...
Andrea Giudiceandrea wrote:
> Moreover, it is not possible to add the output layer to an exiting GPKG, SQLite... c...
Andrea Giudiceandrea
05:36 AM Bug report #19946 (Closed): ogr based tools do not work anymore with PostGIS inputs (possibly als...
Applied in changeset commit:qgis|7977450796903babff4791301e64ecf52f52b039. Nyall Dawson
05:36 AM Bug report #19946 (Closed): ogr based tools do not work anymore with PostGIS inputs (possibly als...
Applied in changeset commit:qgis|7977450796903babff4791301e64ecf52f52b039. Nyall Dawson
04:59 AM Bug report #16759: QGIS shows incomplete data when opening a .pbf/.osm file
Even -- any ideas here? Nyall Dawson
02:08 AM Bug report #16759: QGIS shows incomplete data when opening a .pbf/.osm file
The error shown is "ERROR 1: Too many features have accumulated in points layer. Use OGR_INTERLEAVED_READING=YES mode... Stephen Knox

2018-09-27

12:26 AM Bug report #14900: Styling panel: Clicking the Apply button adds a new row to history tab even if...
This is a tricky one and not easy to solve at the moment as we don't know what has changed on each widget. Each widg... Nathan Woodrow
09:24 PM Bug report #19973: QGIS 3.3 master delete duplicate geometries does not work
EDIT:
for a dataset of <6k points it takes 243 seconds
salvatore fiandaca
09:11 PM Bug report #19973 (Closed): QGIS 3.3 master delete duplicate geometries does not work
I extracted the vertices of the polygonal vector that I attach,
subsequently I launch the geo-algorithm 'delete dup...
salvatore fiandaca
07:12 PM Bug report #19963: Save Features As "broken" - CSV & Geometry AS_WKT not working
Giovanni Manghi wrote:
> Dan V wrote:
> > it's still very confusing!
>
> Can you elaborate? is there something w...
Dan V
09:28 AM Bug report #19963: Save Features As "broken" - CSV & Geometry AS_WKT not working
Dan V wrote:
> it's still very confusing!
Can you elaborate? is there something we can do better in this case?
Giovanni Manghi
06:34 PM Bug report #19969: GDAL_contour not found
Johannes Kroeger wrote:
> How exactly did you install QGIS and did you modify anything during the installation proce...
Nicole Morgan
05:10 PM Bug report #19969 (Feedback): GDAL_contour not found
Giovanni Manghi
04:27 PM Bug report #19969: GDAL_contour not found
How exactly did you install QGIS and did you modify anything during the installation process? Johannes Kroeger
04:18 PM Bug report #19969 (Closed): GDAL_contour not found
I am trying to make contours from a base layer using the default contour tool and get "/bin/sh: gdal_contour: command... Nicole Morgan
05:48 PM Bug report #18988 (Feedback): QGIS Server rendering different from Desktop rendering
Paul Blottiere
05:47 PM Bug report #18988: QGIS Server rendering different from Desktop rendering
I just tested this issue with the next GetMap request and the rendered image is correct:... Paul Blottiere
05:42 PM Feature request #19972 (Open): Enrich point cluster renderer display options
hello,
Point cluster renderer is a great functionnality. But I would like to show in cluster (not only the cluster...
Patrick Palmier
05:18 PM Bug report #19967: Extension Processing
Data Tactis wrote:
> I'm sending you a screenshot of the error message
when the crash happens?
Try again with a ...
Giovanni Manghi
02:35 PM Bug report #19967: Extension Processing
I'm sending you a screenshot of the error message Data Tactis