Activity

From 2015-12-08 to 2016-01-06

2016-01-06

11:32 PM Bug report #5602: Identify disabled in WMS for grouped layers
Jukka Rahkonen wrote:
> Yes, but it seems to require that every individual layer in the group is queryable. If one la...
michele zanolli
05:09 AM Bug report #5602 (Closed): Identify disabled in WMS for grouped layers
Jukka Rahkonen wrote:
> Yes, but it seems to require that every individual layer in the group is queryable. If one la...
Giovanni Manghi
09:27 PM Bug report #14063 (Closed): Diagrams: impossible to change the legend until the dialog is validated
Fixed in changeset commit:"b8bce97c1f2f089ece559a9501c7e4d83732aa7c". Nyall Dawson
02:51 PM Bug report #14063 (Closed): Diagrams: impossible to change the legend until the dialog is validated
Open a layer properties dialog > diagram tab
Check "Show diagrams for this layer"
In the attributes section, add an a...
Harrissou Santanna
02:08 PM Bug report #14062: Expressions using commas as decimal seperator fail to evaluate
It fails. Tested with: *0,8 * 3*.
In the field calculator, I get an "Expression is invalid" at the bottom of the dial...
Harrissou Santanna
11:18 AM Bug report #14062 (Feedback): Expressions using commas as decimal seperator fail to evaluate
The spin boxes calculations use the same expression engine as field calculator. Can you test if the expressions with ... Nyall Dawson
11:18 AM Bug report #14062 (Feedback): Expressions using commas as decimal seperator fail to evaluate
The spin boxes calculations use the same expression engine as field calculator. Can you test if the expressions with ... Nyall Dawson
10:22 AM Bug report #14062: Expressions using commas as decimal seperator fail to evaluate
Oups, miss a title. Can be something like "Comma separated value not allowed in spinbox calculation" Harrissou Santanna
10:19 AM Bug report #14062 (Closed): Expressions using commas as decimal seperator fail to evaluate
In symbol properties (and elsewhere in QGIS), you can put a calculation expression in a spinbox instead of typing a v... Harrissou Santanna
01:02 PM Feature request #13750 (Closed): filter legend according to canvas extent AND scale visibility ra...
Seems done now in 2.12 Regis Haubourg
12:29 PM Bug report #13592 (Closed): Processing: `r.to.vect` and `v.generalize` fail
one last test, on qgis master, both modules on grass 6 and 7, on both linux and windows, no issues.
If you have da...
Giovanni Manghi
12:29 PM Bug report #13592 (Closed): Processing: `r.to.vect` and `v.generalize` fail
one last test, on qgis master, both modules on grass 6 and 7, on both linux and windows, no issues.
If you have da...
Giovanni Manghi
11:55 AM Bug report #13192 (Closed): Error when saving Matplotlib figure
as far as I understand this could be an issue in matplotlib as is packaged in osgeo4w, if so please file a ticket in ... Giovanni Manghi
11:55 AM Bug report #13192 (Closed): Error when saving Matplotlib figure
as far as I understand this could be an issue in matplotlib as is packaged in osgeo4w, if so please file a ticket in ... Giovanni Manghi
11:53 AM Bug report #13144 (Closed): Style Categorized not working with PostGis database
Jürgen Fischer wrote:
> Any output in the log?
closing for lack of feedback, please reopen if necessary.
Giovanni Manghi
11:53 AM Bug report #13144 (Closed): Style Categorized not working with PostGis database
Jürgen Fischer wrote:
> Any output in the log?
closing for lack of feedback, please reopen if necessary.
Giovanni Manghi
11:52 AM Bug report #12361 (Closed): QGIS crashes whenever using Python console
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
11:52 AM Bug report #12361 (Closed): QGIS crashes whenever using Python console
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
11:51 AM Bug report #6481 (Closed): ftools function "Export/Add geometry columns" produces incorrect dbase...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
11:51 AM Bug report #6481 (Closed): ftools function "Export/Add geometry columns" produces incorrect dbase...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
11:50 AM Bug report #9369 (Closed): "duplicate layer" takes ages to duplicate spatialite layers
Closing for lack of feedback and because I cannot replicate with recent releases, but please reopen if still true (an... Giovanni Manghi
11:50 AM Bug report #9369 (Closed): "duplicate layer" takes ages to duplicate spatialite layers
Closing for lack of feedback and because I cannot replicate with recent releases, but please reopen if still true (an... Giovanni Manghi
11:49 AM Bug report #13065 (Open): WFS 1.0.0 Client requests with a GML component fail against Geoserver (...
Giovanni Manghi
11:48 AM Bug report #14058 (Closed): editing layers created with DB Manager
I don't think that this option is related to editing capabilities of the loaded layer from query
http://qgis.org/api...
Giovanni Manghi
11:48 AM Bug report #14058 (Closed): editing layers created with DB Manager
I don't think that this option is related to editing capabilities of the loaded layer from query
http://qgis.org/api...
Giovanni Manghi
11:41 AM Bug report #8628 (Closed): DB Manager does not load PostGIS rasters using QGIS-master for Debian
Giovanni Manghi
08:53 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
11:20 AM Feature request #14061 (Closed): Composer: Add an option to export only the preview atlas feature
You can - don't use the atlas exports, just use the normal PDF/png/svg exports that you'd use if you didn't have an a... Nyall Dawson
11:20 AM Feature request #14061 (Closed): Composer: Add an option to export only the preview atlas feature
You can - don't use the atlas exports, just use the normal PDF/png/svg exports that you'd use if you didn't have an a... Nyall Dawson
08:54 AM Feature request #14061 (Closed): Composer: Add an option to export only the preview atlas feature
It'd be nice to be able to choose to export only the previewed atlas feature page(s) and not all the atlas. Harrissou Santanna
10:12 AM Feature request #4702 (Closed): GDAL tools: add gdal2tiles tool
Implemented in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:12 AM Feature request #4702 (Closed): GDAL tools: add gdal2tiles tool
Implemented in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:12 AM Feature request #4702 (Closed): GDAL tools: add gdal2tiles tool
Implemented in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:11 AM Feature request #3331 (Closed): GdalTools: add utilities for MapServer
PR is merged in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:11 AM Feature request #3331 (Closed): GdalTools: add utilities for MapServer
PR is merged in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:11 AM Feature request #3331 (Closed): GdalTools: add utilities for MapServer
PR is merged in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
10:11 AM Feature request #3331 (Closed): GdalTools: add utilities for MapServer
PR is merged in #1f22b432b52fa077f9837b9a8b77b9c8d6f84f62 ! Médéric RIBREUX
08:57 AM Bug report #14018 (Closed): UNable to create Multiple map outputs on one print composer
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:57 AM Bug report #14018 (Closed): UNable to create Multiple map outputs on one print composer
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:57 AM Bug report #13395 (Closed): Load style from database
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:57 AM Bug report #13395 (Closed): Load style from database
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:55 AM Bug report #13151 (Closed): Zonal statistics error: 0-d arrays can't be indexed
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:55 AM Bug report #13151 (Closed): Zonal statistics error: 0-d arrays can't be indexed
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:55 AM Bug report #11746 (Closed): Vertical lines appear as artifacts when map has lots of layers turned...
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:55 AM Bug report #11746 (Closed): Vertical lines appear as artifacts when map has lots of layers turned...
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:54 AM Bug report #12892 (Closed): Can't load table from SQL editor in DBManager with 'WHERE' argument
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:54 AM Bug report #12892 (Closed): Can't load table from SQL editor in DBManager with 'WHERE' argument
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:53 AM Bug report #14009 (Closed): ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:53 AM Bug report #14009 (Closed): ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
closing for lack of feedback, please reopen of necessary. Giovanni Manghi
08:40 AM Feature request #14060 (Open): Composer: Add an option to select the page to export
Create a multi page composition and "Export as image" this one.
You'll most of the time need to rename some of the g...
Harrissou Santanna
05:40 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Got it. Harrissou Santanna
05:36 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option

> Beyond what may be passionate words, *what is the guideline about issue report closure*? I use to close _my own re...
Giovanni Manghi
05:19 AM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server
Robin Houtmeyers wrote:
> Hi, I am reopening this issue since the QGIS WFS requests mentioned in #6 work ok now (this...
Giovanni Manghi
05:19 AM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server
Robin Houtmeyers wrote:
> Hi, I am reopening this issue since the QGIS WFS requests mentioned in #6 work ok now (this...
Giovanni Manghi
05:07 AM Bug report #14056 (Closed): QCA::scanForPlugins()
please ask questions on the users or developers mailing lists. Giovanni Manghi
05:07 AM Bug report #14056 (Closed): QCA::scanForPlugins()
please ask questions on the users or developers mailing lists. Giovanni Manghi
05:07 AM Bug report #13209: area not calculated correctly with OTF on
see also #14057 Giovanni Manghi
05:06 AM Bug report #14057 (Closed): $area bogus value
duplicate of #13209 Giovanni Manghi
05:06 AM Bug report #14057 (Closed): $area bogus value
duplicate of #13209 Giovanni Manghi
05:06 AM Bug report #14059: QGIS Server crash with OTF active and layer without features
No I don't have any evidence. I only checked the mentioned releases. Horst Düster
05:04 AM Bug report #14059 (Feedback): QGIS Server crash with OTF active and layer without features
Do you have any evidence that was not crashing in qgis < 2.8 ? Giovanni Manghi
05:00 AM Bug report #14059 (Closed): QGIS Server crash with OTF active and layer without features
1. open new project
2. add layer with features and CRS definition EPSG:4326
3. remove all features
4. select OTF diff...
Horst Düster
01:02 AM Feature request #14045: Style Manager : Allow selection of multiple symbols at once while groupin...
It sounds good to me.
And +1 for the drag'n drop to the group tree.
Harrissou Santanna

2016-01-05

12:34 AM Bug report #14058 (Closed): editing layers created with DB Manager
I noticed a strange behavior in layers created with DB manager. Tested it in QGIS 2.6.1 and QGIS 2.12.0
In QGIS 2.6....
Mart Reinola
01:31 PM Feature request #14045: Style Manager : Allow selection of multiple symbols at once while groupin...
Hi Harrissou,
I see. I think this dialog is a good example of using "modes":https://en.wikipedia.org/wiki/Mode_(comp...
Sebastian Dietrich
12:45 PM Bug report #10505 (Closed): Labels hidden by histograms
Fixed in master. Now you can set the z-index for labels and diagrams manually to control which will be drawn over the... Nyall Dawson
12:45 PM Bug report #10505 (Closed): Labels hidden by histograms
Fixed in master. Now you can set the z-index for labels and diagrams manually to control which will be drawn over the... Nyall Dawson
12:40 PM Bug report #13809: [Mint, Cinnamon DE] Properties dialog for layers panel is not a floating window
I don't use Linux but "this thread":http://askubuntu.com/questions/109321/popup-dialogs-attached-to-window-title-and-... Sebastian Dietrich
09:03 AM Bug report #14057 (Closed): $area bogus value
I created a snip file using two separate shape files. The resulting layer has approximately 12,000 features. When usi... Marina Mautner
06:08 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Jürgen Fischer wrote:
> Harrissou Santanna wrote:
> > there are so many elder bug reports that are worth closing, I t...
Harrissou Santanna
05:46 AM Bug report #14056 (Closed): QCA::scanForPlugins()
in vs2008
run:QCA::scanForPlugins(),software collapse,why?
I come from china, ,my tel:18310143979
houjiangzhen houjiangzhen
05:26 AM Bug report #13255 (Reopened): Some WFS data not displayed from LuciadLightspeed WFS server
Hi, I am reopening this issue since the QGIS WFS requests mentioned in #6 work ok now (this
issue was due to a miscon...
Robin Houtmeyers
05:14 AM Bug report #11307 (Closed): Default transparency for selections not honored
2.13.0-Master
Revision
cbd29e5
*
Fixed*
Dmitry Kravchook
03:53 AM Bug report #14055: Style Manager: Remove or deactivate the Help button
wow... quicky :)
Thanks
Harrissou Santanna
03:41 AM Bug report #14055 (Closed): Style Manager: Remove or deactivate the Help button
Fixed in changeset commit:"17ed9d15fa00aeb305ef0dbee48896665d38b01c". Nyall Dawson
02:25 AM Bug report #14055 (Closed): Style Manager: Remove or deactivate the Help button
Settings menu --> Style Manager
There's a Help button in the dialog that opens an empty dialog.
Should be removed acc...
Harrissou Santanna
03:42 AM Bug report #11864: wfs parsing of decimal value results in QString
I think this can be fixed by adding 'decimal' to the checks in qgswfsprovider?... Roel Huybrechts
03:41 AM Bug report #13888 (Closed): Label display not fit with layer order
Fixed in changeset commit:"5e4c14cd402009037d8d82e8a6d75d495c24d55a". Nyall Dawson
03:41 AM Feature request #13559 (Closed): Make it possible to control rendering order of diagrams
Fixed in changeset commit:"5e4c14cd402009037d8d82e8a6d75d495c24d55a". Nyall Dawson
03:38 AM Bug report #13863 (Reopened): Complex Polygon not displayed on screen if it can not be displayed ...
Not yet fixed Nyall Dawson
02:17 AM Bug report #5602: Identify disabled in WMS for grouped layers
Yes, but it seems to require that every individual layer in the group is queryable. If one layer in not queryable Map... Jukka Rahkonen
01:37 AM Bug report #5602: Identify disabled in WMS for grouped layers
Thanks for the explanation, I agree with you. Only a precisation: if the WMS Client queries the group layer - even if... michele zanolli

2016-01-04

12:44 AM Bug report #5602: Identify disabled in WMS for grouped layers
The reason is that in the GetCapabilities document that Mapserver creates the group layer is not marked as queryable.... Jukka Rahkonen
06:33 AM Bug report #5602 (Reopened): Identify disabled in WMS for grouped layers
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> I can't reproduce it on QGIS 2.13 master on BRGM WMS services on h...
michele zanolli
12:17 AM Bug report #14043 (Closed): feature rendering order not saved, settings lost when re-loading project
Fixed in changeset commit:"614c84f2c681ac8c8262a7130627272e40ac75c7". Anonymous
06:36 PM Bug report #14043: feature rendering order not saved, settings lost when re-loading project
This, https://github.com/qgis/QGIS/pull/2636, fixes the issue. Mathieu Pellerin - nIRV
05:58 PM Bug report #14043: feature rendering order not saved, settings lost when re-loading project
Matthias, ok, it might have to do with the fact that the layer I was testing is a rule-based symbology.
I'm attachin...
Mathieu Pellerin - nIRV
04:58 AM Bug report #14043 (Feedback): feature rendering order not saved, settings lost when re-loading pr...
Can't reproduce with a shapefile and the default symbology apart from the rendering order. Matthias Kuhn
06:31 PM Bug report #14050 (Closed): Style Manager : trying to add a symbol to a not renamed group fails
Fixed in changeset commit:"115cc483dd105be073fe8a6202547c97a9c3380c". Nyall Dawson
06:26 PM Bug report #14049 (Closed): Style Manager : Combining "Group Symbols" and "Apply Group" tools fre...
Fixed in changeset commit:"90eaba9f4f78097b18e48a4d99793fa6a2abbe23". Nyall Dawson
04:52 AM Bug report #14049: Style Manager : Combining "Group Symbols" and "Apply Group" tools freezes the ...
Thanks for working on this Harrissou Santanna
01:31 PM Bug report #14052 (Closed): Symbol selector dialog: useless advanced "Clip features to canvas ext...
Ok, let's close this. It's most definitely a symbol related setting and belongs in the dialog. Here's some extra proo... Nyall Dawson
12:33 PM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Harrissou Santanna wrote:
> there are so many elder bug reports that are worth closing, I think.
Feel free to do so.
Jürgen Fischer
04:57 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Harrissou Santanna wrote:
> I still don't understand which feature and which canvas we are talking about at this leve...
Giovanni Manghi
04:50 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
I still don't understand which feature and which canvas we are talking about at this level of the design (keep in min... Harrissou Santanna
04:22 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Harrissou Santanna wrote:
> Having it closed simply like that makes me feel that my report was just felt as noisy and...
Giovanni Manghi
05:22 AM Feature request #4702 (In Progress): GDAL tools: add gdal2tiles tool
Hello, bug triage...
there is [a PR](https://github.com/qgis/QGIS/pull/2633) for this feature request...
Médéric RIBREUX
05:19 AM Feature request #3331 (In Progress): GdalTools: add utilities for MapServer
Hello, bug triage...
there is now "a PR":https://github.com/qgis/QGIS/pull/2633 for this feature request...
Médéric RIBREUX
04:59 AM Feature request #3331 (Feedback): GdalTools: add utilities for MapServer
see https://github.com/qgis/QGIS/pull/2633 Giovanni Manghi
04:59 AM Feature request #3331 (Feedback): GdalTools: add utilities for MapServer
see https://github.com/qgis/QGIS/pull/2633 Giovanni Manghi
04:59 AM Feature request #3331 (Feedback): GdalTools: add utilities for MapServer
see https://github.com/qgis/QGIS/pull/2633 Giovanni Manghi
05:03 AM Bug report #13661 (Closed): Node tool should not allow to delete nodes and leave just 1 in lines ...
Giovanni Manghi
05:01 AM Feature request #12343 (Feedback): Add GRASS v.net* modules to Processing toolbox
Giovanni Manghi
05:00 AM Feature request #12343: Add GRASS v.net* modules to Processing toolbox
see https://github.com/qgis/QGIS/pull/2628 Giovanni Manghi
04:50 AM Bug report #13863 (Closed): Complex Polygon not displayed on screen if it can not be displayed en...
Giovanni Manghi
04:49 AM Bug report #13862 (Closed): Labels are not displayed on Layers with "cut-outs"
Giovanni Manghi

2016-01-03

11:53 PM Bug report #13661: Node tool should not allow to delete nodes and leave just 1 in lines or two in...
https://github.com/qgis/QGIS/pull/2632 provides a fix. Marco Hugentobler
11:31 PM Bug report #13490: PostGIS: Merge drops dataset whereas split retains it
Just for the record:
Until this is fixed in QGIS I implemented the functionality in "Digitizing tools":https://github...
Bernhard Ströbl
12:19 PM Bug report #14049: Style Manager : Combining "Group Symbols" and "Apply Group" tools freezes the ...
See "PR 2629":https://github.com/qgis/QGIS/pull/2629 for a solution. Sebastian Dietrich
11:51 AM Bug report #14049: Style Manager : Combining "Group Symbols" and "Apply Group" tools freezes the ...
You end up in the same frozen state when clicking on another tab while in _grouping mode_. Sebastian Dietrich
09:35 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Sorry if I hurt you. I wasn't criticising the work you may have done on the bug tracker. I've no skill to judge it so... Harrissou Santanna
07:33 AM Bug report #14052 (Feedback): Symbol selector dialog: useless advanced "Clip features to canvas e...
Harrissou Santanna wrote:
> Closing a subject while it's being discussed is not fair, Giovanni, and doesn't encourage...
Giovanni Manghi
05:49 AM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
Closing a subject while it's being discussed is not fair, Giovanni, and doesn't encourage people to contribute. This ... Harrissou Santanna
05:26 AM Bug report #14052 (Reopened): Symbol selector dialog: useless advanced "Clip features to canvas e...
Nyall Dawson:
> Short answer: this isn't a bug ;)
If by bug you mean "the option fails to do what it's designed for"...
Harrissou Santanna
04:58 AM Bug report #14052 (Closed): Symbol selector dialog: useless advanced "Clip features to canvas ext...
Giovanni Manghi
06:17 AM Feature request #4033 (Open): Map navigation - temporarily change to zoom in / zoom out / pan tool
Médéric RIBREUX
06:16 AM Feature request #4151 (Closed): New Feature: Render (Toggle map rendering) option for every layer...
Hello, bug triage...
closed for lack of feedback and the feature seems to be implemented in QGIS 2.13 master.
Feel ...
Médéric RIBREUX
06:16 AM Feature request #4151 (Closed): New Feature: Render (Toggle map rendering) option for every layer...
Hello, bug triage...
closed for lack of feedback and the feature seems to be implemented in QGIS 2.13 master.
Feel ...
Médéric RIBREUX
06:16 AM Feature request #4151 (Closed): New Feature: Render (Toggle map rendering) option for every layer...
Hello, bug triage...
closed for lack of feedback and the feature seems to be implemented in QGIS 2.13 master.
Feel ...
Médéric RIBREUX
06:14 AM Feature request #4054 (Open): Enhancement: option in the interpolation plugin to set the extent t...
Médéric RIBREUX
06:11 AM Feature request #4346 (Closed): startup tip suggestion
Hello, bug triage...
fixed in commit:88d3b9f
Médéric RIBREUX
06:11 AM Feature request #4346 (Closed): startup tip suggestion
Hello, bug triage...
fixed in commit:88d3b9f
Médéric RIBREUX
06:11 AM Feature request #4346 (Closed): startup tip suggestion
Hello, bug triage...
fixed in commit:88d3b9f
Médéric RIBREUX
05:01 AM Bug report #13061 (Feedback): QGIS crashes on close if data was read through GDAL in Python Console
Leonard Kong wrote:
> This is a blocking issue for me, . . . I have been thinking that this is a gdal problem and I t...
Giovanni Manghi
05:00 AM Feature request #12722 (Feedback): Allow copy/paste of columns between tables also when columns d...

> However I believe it should also work for the scenario where the columns have the same names but are in a differen...
Giovanni Manghi
05:00 AM Feature request #12722 (Feedback): Allow copy/paste of columns between tables also when columns d...

> However I believe it should also work for the scenario where the columns have the same names but are in a differen...
Giovanni Manghi
04:58 AM Bug report #7077 (Feedback): Opening 1.8 project in 1.9 changes shading of raster layers
Giovanni Manghi

2016-01-02

09:58 PM Bug report #14052: Symbol selector dialog: useless advanced "Clip features to canvas extent" option
I think you may be misunderstanding what this setting does. Easiest way to explain is to try turning it on and off wi... Nyall Dawson
06:25 PM Bug report #14052 (Reopened): Symbol selector dialog: useless advanced "Clip features to canvas e...
I'm sorry but I don't understand your answer.
In the Style Manager, we're just building models of symbols, models tha...
Harrissou Santanna
01:33 PM Bug report #14052 (Closed): Symbol selector dialog: useless advanced "Clip features to canvas ext...
That option still applies to a symbol, even in the style manager - it's used to modify the appearance of a centroid o... Nyall Dawson
01:33 PM Bug report #14052 (Closed): Symbol selector dialog: useless advanced "Clip features to canvas ext...
That option still applies to a symbol, even in the style manager - it's used to modify the appearance of a centroid o... Nyall Dawson
04:51 AM Bug report #14052 (Closed): Symbol selector dialog: useless advanced "Clip features to canvas ext...
Open Settings menu --> Style Manager
Activate Line or Fill tab and click Edit or Add button
At the bottom of the symb...
Harrissou Santanna
06:16 PM Feature request #14045: Style Manager : Allow selection of multiple symbols at once while groupin...
Hi Sebastian,
I'm not using any of them :). I was just checking how it works so that I can update the Doc.
And indeed...
Harrissou Santanna
12:49 PM Feature request #14045: Style Manager : Allow selection of multiple symbols at once while groupin...
> It may be interesting to have an option to select many symbols at once (click'n drag, holding a shift or ctrl key).... Sebastian Dietrich
05:37 PM Feature request #14053: Symbol selector dialog: use same terms in the different properties of sym...
Hi Nyall,
I'm on 2.12.0 Trusty Tahr but didn't find anything different when (quickly) check these dialogs in master.
...
Harrissou Santanna
01:17 PM Feature request #14053 (Feedback): Symbol selector dialog: use same terms in the different proper...
Which version does this apply to? Can you give specifics? Nyall Dawson
10:50 AM Feature request #14053 (Closed): Symbol selector dialog: use same terms in the different properti...
While designing a symbol (marker, line or fill), according to the symbol layer type chosen, in its properties:
* "Rot...
Harrissou Santanna
01:50 PM Bug report #13809 (Closed): [Mint, Cinnamon DE] Properties dialog for layers panel is not a float...
This is an issue with Cinnamon, not QGIS. We use modal dialogs like the layer properties window where appropriate. Th... Nyall Dawson
01:50 PM Bug report #13809 (Closed): [Mint, Cinnamon DE] Properties dialog for layers panel is not a float...
This is an issue with Cinnamon, not QGIS. We use modal dialogs like the layer properties window where appropriate. Th... Nyall Dawson
12:53 PM Bug report #7077: Opening 1.8 project in 1.9 changes shading of raster layers
Is this still true for master?
Can you attach an example, e.g. a QGIS-1.8 project with one affected raster layer, in...
Sebastian Dietrich
04:23 AM Bug report #14051 (Closed): Symbol selector dialog: "lock layer's colors" button should have only...
Open the symbol selector dialog,
add new symbol layers to the symbol tree
and try to lock some of them with the "lo...
Harrissou Santanna

2016-01-01

08:21 PM Feature request #12722: Allow copy/paste of columns between tables also when columns do not have ...
There has been an improvement with 2.12 in seeing that pastes work most of the time provided the source table columns... Patrick Dunford
05:48 PM Bug report #14050: Style Manager : trying to add a symbol to a not renamed group fails
See "PR 2627":https://github.com/qgis/QGIS/pull/2627 for a solution. Sebastian Dietrich
11:28 AM Bug report #8997 (Closed): Memory vector layer datasource wrongly written in project
Fixed in changeset commit:"5a42728f3e5b7d49c959dc2a3363d91f411d9b53". Nyall Dawson
05:54 AM Bug report #14032: Changes in "Options/Digitizing/Rubberband/Line color" doesn't change backgroun...
Thanks for new feature - it works better than in arcmap Piotr Kania

2015-12-31

05:58 PM Bug report #14050 (Closed): Style Manager : trying to add a symbol to a not renamed group fails
Open the Settings menu --> Style Manager
Add a new group. Do not rename it.
All attempts to add symbols to this group...
Harrissou Santanna
05:53 PM Bug report #14049 (Closed): Style Manager : Combining "Group Symbols" and "Apply Group" tools fre...
Open Settings menu --> Style Manager
Create a group and rename it
Select the group and then the "Group Symbols" tool ...
Harrissou Santanna
03:44 PM Bug report #13061: QGIS crashes on close if data was read through GDAL in Python Console
This is a blocking issue for me, . . . I have been thinking that this is a gdal problem and I think most people looki... Leonard Kong
02:23 PM Bug report #14048 (Closed): Importing symbols in Style Library doesn't always use the group name ...
When importing symbols into Style library, there's a field to indicate the group to which symbols belong.
* If you en...
Harrissou Santanna
09:41 AM Feature request #14047 (Open): Standardize symbols export process between PNG, SVG and XML formats
From the Style Library you can :
* Export to PNG : export to distinct PNG files the **selected** symbols
* Export to ...
Harrissou Santanna
08:21 AM Feature request #14046 (Closed): Exporting symbol from Style Manager : add a checkbox near each s...
When trying to export symbols from the Style Manager, you have a dialog with all available symbols. You then need to ... Harrissou Santanna
08:19 AM Feature request #14045 (Closed): Style Manager : Allow selection of multiple symbols at once whil...
In Style Manager, when grouping symbols into a group, you get a dialog with symbols and a checkbox associated. This h... Harrissou Santanna

2015-12-30

06:00 PM Bug report #14041: opening the layer properties window can take ages nowadays
Nyall, after your commit:34c9daa, I cannot see a difference in speed between opening a layer properties window for a ... Mathieu Pellerin - nIRV
01:38 PM Bug report #8997: Memory vector layer datasource wrongly written in project
See "PR 2624":https://github.com/qgis/QGIS/pull/2624 for a solution. Sebastian Dietrich
05:29 AM Bug report #6449 (Closed): Big polygon in shapefile not shown in 1.8.0
cleaning the vector (v.clean/st_makevalid/etc.) gives a vector that works as expected. Giovanni Manghi
05:29 AM Bug report #6449 (Closed): Big polygon in shapefile not shown in 1.8.0
cleaning the vector (v.clean/st_makevalid/etc.) gives a vector that works as expected. Giovanni Manghi
05:20 AM Bug report #5875 (Closed): QGIS doesn't use its own GDAL tools and fails if another version of GD...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
05:20 AM Bug report #5875 (Closed): QGIS doesn't use its own GDAL tools and fails if another version of GD...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
05:19 AM Bug report #6218 (Closed): Loading styles issue
seems also somehow duplicate of #3775 Giovanni Manghi
05:19 AM Bug report #6218 (Closed): Loading styles issue
seems also somehow duplicate of #3775 Giovanni Manghi
03:43 AM Bug report #6097 (Closed): Getting wrong attribute values from a feature in qgis
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:43 AM Bug report #6097 (Closed): Getting wrong attribute values from a feature in qgis
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:43 AM Bug report #6187 (Closed): Raster disappears when bands change
closing as it seems fixed and for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:43 AM Bug report #6187 (Closed): Raster disappears when bands change
closing as it seems fixed and for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:40 AM Bug report #6375 (Closed): svg and simple symbol mix do not scale the same way
closing as it seems fixed and for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:40 AM Bug report #6375 (Closed): svg and simple symbol mix do not scale the same way
closing as it seems fixed and for the lack of feedback, please reopen if necessary. Giovanni Manghi
03:37 AM Bug report #14044 (Closed): Label rendering problem during zoom in or out
This bug is about rendering features' labels. Tested with QGIS 2.12 on Win7 OS. I added two vector layers (named 1 an... Mehmet Selim BILGIN
02:12 AM Bug report #14038: open graphical modeler models
christian user wrote:
> As a plugin, even core plugin, processing I guess remains untouched when installing a newer v...
Giovanni Manghi

2015-12-29

12:09 AM Bug report #13977 (Closed): QgsVectorFileWriter: bug at saving vector layer to shapefile
As explained, not a bug in QGIS Nyall Dawson
12:09 AM Bug report #13977 (Closed): QgsVectorFileWriter: bug at saving vector layer to shapefile
As explained, not a bug in QGIS Nyall Dawson
07:37 PM Bug report #13977: QgsVectorFileWriter: bug at saving vector layer to shapefile
Simon Chenery wrote:
> Use one of the following filenames to avoid Python escape sequence conversion of \\t to TAB in...
Sebastian Dietrich
06:01 PM Bug report #14043 (Closed): feature rendering order not saved, settings lost when re-loading project
The newly-introduced feature rendering order setttings are not saved in the project file, leading to the settings bei... Mathieu Pellerin - nIRV
05:00 PM Bug report #14041: opening the layer properties window can take ages nowadays
Ok, good to know it isn't just me.
Elevating to blocker since it's an ongoing regression that affects basic operati...
Mathieu Pellerin - nIRV
05:00 PM Bug report #14041: opening the layer properties window can take ages nowadays
Ok, good to know it isn't just me.
Elevating to blocker since it's an ongoing regression that affects basic operati...
Mathieu Pellerin - nIRV
02:41 AM Bug report #14041: opening the layer properties window can take ages nowadays
It's not just you - I'm seeing this too. Nyall Dawson
01:40 AM Bug report #14041 (Closed): opening the layer properties window can take ages nowadays
I've noticed that for some time now, opening the layer properties window can take 4-5 seconds on layers having a larg... Mathieu Pellerin - nIRV
03:50 AM Bug report #14038: open graphical modeler models
That's a good hint. I think this is not stated pretty clearely in the docs. As a plugin, even core plugin, processing... christian user
02:59 AM Bug report #14028 (Open): CurvePolygons not drawn
Nyall Dawson

2015-12-28

12:34 AM Bug report #10756 (Feedback): Minidump on closing QGIS 2.4
Giovanni Manghi
12:33 AM Bug report #10756: Minidump on closing QGIS 2.4
Leonard Kong wrote:
> Hi:
> I'm working on a plugin and am experiencing the exact same issue. I have traced it down ...
Giovanni Manghi
10:37 AM Bug report #10756: Minidump on closing QGIS 2.4
Hi:
I'm working on a plugin and am experiencing the exact same issue. I have traced it down to a gdal call in the my...
Leonard Kong
12:31 AM Bug report #13060 (Closed): Postgresql materialized view doesn't open
zimirrr leonid wrote:
> thx a lot.
> It worked!
>
> But why MV do need to be selected manualy and simple view don't?...
Giovanni Manghi
12:31 AM Bug report #13060 (Closed): Postgresql materialized view doesn't open
zimirrr leonid wrote:
> thx a lot.
> It worked!
>
> But why MV do need to be selected manualy and simple view don't?...
Giovanni Manghi
05:29 AM Bug report #13060: Postgresql materialized view doesn't open
thx a lot.
It worked!
But why MV do need to be selected manualy and simple view don't?
zimirrr leonid
05:19 AM Bug report #13060: Postgresql materialized view doesn't open
zimirrr leonid wrote:
> Sorry, didn't notice that))
> Here is the pic of full dialog
> I can't expand Feature id, the...
Giovanni Manghi
04:22 AM Bug report #13060: Postgresql materialized view doesn't open
Sorry, didn't notice that))
Here is the pic of full dialog
I can't expand Feature id, there is only "Select..."
zimirrr leonid
02:14 AM Bug report #13060: Postgresql materialized view doesn't open
zimirrr leonid wrote:
> i use 'SELECT row_number() over () AS qgisid ' to create unique rowid
>
> i've just tested i...
Giovanni Manghi
01:00 AM Bug report #13060: Postgresql materialized view doesn't open
i use 'SELECT row_number() over () AS qgisid ' to create unique rowid
i've just tested it in version 2.12.0 and that...
zimirrr leonid
01:00 AM Bug report #13060: Postgresql materialized view doesn't open
i use 'SELECT row_number() over () AS qgisid ' to create unique rowid
i've just tested it in version 2.12.0 and that...
zimirrr leonid
12:30 AM Bug report #14039 (Closed): Trouble Installing qgis-plugin-grass, Dependency Issue
Richard Carpenter wrote:
> Jürgen,
>
> I've tried installing it using 'debian-ltr' and 'ubuntugis-ltr', but not at t...
Giovanni Manghi
12:30 AM Bug report #14039 (Closed): Trouble Installing qgis-plugin-grass, Dependency Issue
Richard Carpenter wrote:
> Jürgen,
>
> I've tried installing it using 'debian-ltr' and 'ubuntugis-ltr', but not at t...
Giovanni Manghi
09:09 AM Bug report #14039: Trouble Installing qgis-plugin-grass, Dependency Issue
Jürgen,
I've tried installing it using 'debian-ltr' and 'ubuntugis-ltr', but not at the same time. I comment out th...
Richard Carpenter
08:31 AM Bug report #14039: Trouble Installing qgis-plugin-grass, Dependency Issue
Right. For distributions with GRASS7 there is no grass plugin in 2.8. GRASS7 support in plugin was added in 2.12 - o... Jürgen Fischer
03:12 AM Bug report #14039: Trouble Installing qgis-plugin-grass, Dependency Issue
Jürgen Fischer wrote:
> You might be mixing repositories. You should either have qgis.org/debian-ltr or qgis.org/ubu...
Giovanni Manghi
03:46 PM Bug report #8285 (Closed): Saving styles (qml and sld) doesn't work for CSV layers under Windows
Fixed in changeset commit:"b73785023b408cd5a989c445548e2fa0bb2b9647". Jürgen Fischer
03:29 PM Bug report #8285: Saving styles (qml and sld) doesn't work for CSV layers under Windows
See "PR 2620":https://github.com/qgis/QGIS/pull/2620 for a solution. Sebastian Dietrich
12:48 PM Bug report #13061: QGIS crashes on close if data was read through GDAL in Python Console
I can verify that it still exists with QGIS 2.12. My plugin crashes in exactly the same location. Leonard Kong
10:25 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Karl Kastner wrote:
> On my machine the bug can be reproduced when all plugins are disabled or by temporally moving t...
Giovanni Manghi
08:02 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
On my machine the bug can be reproduced when all plugins are disabled or by temporally moving the ~/.qgis2 folder bef... Karl Kastner
06:02 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Sorry for making a false alarm!
It was CadTools, I deinstalled them (and Digitizing Tools to be sure) and now it work...
Hynek Suchy
05:54 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Gerhard Spieles wrote:
> Hi Hynek,
> maybe a problem of installed plugins.
> See #13869
usually in my testing boxes ...
Giovanni Manghi
05:48 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Hi Hynek,
maybe a problem of installed plugins.
See #13869
Gerhard Spieles
05:35 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Jurgen, Nyall, shouldn't this be tagged as blocker? Giovanni Manghi
05:30 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Hello!
I would like to confirm this bug.
I am on Windows Vista 32bits Ultimate, QGIS 2.12.1 Lyon, standalone installe...
Hynek Suchy
05:17 AM Bug report #14038: open graphical modeler models
christian user wrote:
> It's the standard 2.8.5 LTR installation if this is of interest.
> Where can I find the versi...
Giovanni Manghi
04:29 AM Bug report #14038: open graphical modeler models
It's the standard 2.8.5 LTR installation if this is of interest.
Where can I find the version? I can see some stateme...
christian user
05:15 AM Bug report #13919: QGIS server security patch: random crashes and performance regression
Note that all the project I tested with QGIS server use Postgis as data source - if that helps. Andreas Neumann
05:14 AM Bug report #13919: QGIS server security patch: random crashes and performance regression
Hi Stéphane,
I hope you had a good Christmas vacation!
I tested https://github.com/sbrunner/QGIS/commit/6d56cba465b...
Andreas Neumann
04:58 AM Bug report #10636 (Closed): Translation for command description and help in Processing: GRASS and...
Paolo Cavallini
04:27 AM Bug report #7745: Please use grass-doc from local files, not from the web
Apparently not, at least on 2.8.5, see attached. Paolo Cavallini
04:00 AM Bug report #14029: Server crash upon first read of a project
I tried reproducing the issue on another machine with a simple project, activating and deactivating reprojection, and... Paolo Cavallini
03:52 AM Bug report #14008 (Closed): Crash zooming to wide extent
Confirmed, duplicate of #12757 Sandro Santilli
03:52 AM Bug report #14008 (Closed): Crash zooming to wide extent
Confirmed, duplicate of #12757 Sandro Santilli
03:06 AM Bug report #12416 (Open): QGIS 2.8.1 crash opening FileGDB (openGDB-Driver)
Flo Ju wrote:
> As an attachement the GDB-File (zipped) - QGIS 2.8.1 crashes on Win-Server VM and Win7 64Bit when ope...
Giovanni Manghi
01:14 AM Bug report #14024: DB Manager fails copying a LINESTRINGM
Not that I know of. Please check also https://lists.osgeo.org/pipermail/postgis-users/2015-December/041072.html
I'll ...
Paolo Cavallini

2015-12-27

05:21 PM Bug report #14039 (Feedback): Trouble Installing qgis-plugin-grass, Dependency Issue
You might be mixing repositories. You should either have qgis.org/debian-ltr or qgis.org/ubuntugis-ltr, but not both. Jürgen Fischer
05:21 PM Bug report #14039 (Feedback): Trouble Installing qgis-plugin-grass, Dependency Issue
You might be mixing repositories. You should either have qgis.org/debian-ltr or qgis.org/ubuntugis-ltr, but not both. Jürgen Fischer
05:17 PM Bug report #14039 (Closed): Trouble Installing qgis-plugin-grass, Dependency Issue
I'm trying to load QGIS and the additional programs that are recommended to install with it according to QGIS' instal... Richard Carpenter
04:27 PM Bug report #13060: Postgresql materialized view doesn't open
Nicolas Rochard wrote:
> Hello,
>
> - Server Configuration : PostGreSQL 9.3.6 + PostGIS 2.1.5
> - Desktop : QGIS 2.1...
Giovanni Manghi
04:15 PM Bug report #4007 (Closed): Building t2tdoc fails on Windows: 'TEXINPUTS' is not recognized as an ...
ok, reopen if necessary. Giovanni Manghi
04:15 PM Bug report #4007 (Closed): Building t2tdoc fails on Windows: 'TEXINPUTS' is not recognized as an ...
ok, reopen if necessary. Giovanni Manghi
03:07 PM Bug report #4007: Building t2tdoc fails on Windows: 'TEXINPUTS' is not recognized as an internal ...
Ah, sorry. If we don't have someone to reproduce I guess close it.
I don't have a windows build environment at the m...
Alister Hood
02:02 PM Bug report #4007: Building t2tdoc fails on Windows: 'TEXINPUTS' is not recognized as an internal ...
what to do with this ticket? closing? leaving it open? Giovanni Manghi
04:07 PM Bug report #13741: Spatialite moving fields
Jakub Kosik wrote:
> Not same at all - I got mess in fields of single object, not mixed with other objects. Also geom...
Giovanni Manghi
03:59 PM Bug report #13298: Shapefiles corrupting - objects and attributes becoming switched
I also can't replicate the original issue in the description, the one about the mixing/switching attributes.
Please ...
Giovanni Manghi
03:57 PM Bug report #13298: Shapefiles corrupting - objects and attributes becoming switched
Jamie Portman wrote:
> I found the shapefile and object that was having ONE of the issues (not the attributes and obj...
Giovanni Manghi
03:54 PM Bug report #13298: Shapefiles corrupting - objects and attributes becoming switched
Jean-Pierre Vinadia wrote:
> I have quite the same problem with QGIS 2.12.
> I work on a local drive.
> This problem ...
Giovanni Manghi
03:48 PM Bug report #13298: Shapefiles corrupting - objects and attributes becoming switched
Jean-Pierre Vinadia wrote:
> The problem appaers again with an other file. With QGIS 2.12.0
>
> It's really a very v...
Giovanni Manghi
03:14 PM Bug report #12928 (Closed): Using form view to edit data, changes the attribute that uses Date/Ti...
Nhung Seidensticker wrote:
> Hi Giovanni
> My boss is away for another 2 weeks. I need permission. Will provide some ...
Giovanni Manghi
03:14 PM Bug report #12928 (Closed): Using form view to edit data, changes the attribute that uses Date/Ti...
Nhung Seidensticker wrote:
> Hi Giovanni
> My boss is away for another 2 weeks. I need permission. Will provide some ...
Giovanni Manghi
03:11 PM Bug report #12795 (Open): Georeferencer generates incorrect GDAL script when input file is JPG
Giovanni Manghi
02:53 PM Bug report #9598 (Open): problems with adding embed layers/groups
Giovanni Manghi
02:48 PM Bug report #13976 (Closed): Missing strings in translation file
closing for the lack of a clear description (and lack of feedback). Jürgen Fischer
01:13 PM Bug report #13976: Missing strings in translation file
Jürgen Fischer wrote:
> The ts files weren't changed between "2.12.0 and 2.12.1":https://github.com/qgis/QGIS/compare...
Giovanni Manghi
02:42 PM Bug report #10044: OSM Polygons not rendering
this a very detailed report, but very difficult also to try replicate.
Could you test is using a recent release mak...
Giovanni Manghi
02:37 PM Bug report #13608 (Closed): Possible Bug in GEOS when calculating intersection of two polygons wi...
this was caused by a change in the qgis code that left several tools in the vector menu "broken" when the result cont... Giovanni Manghi
02:37 PM Bug report #13608 (Closed): Possible Bug in GEOS when calculating intersection of two polygons wi...
this was caused by a change in the qgis code that left several tools in the vector menu "broken" when the result cont... Giovanni Manghi
02:32 PM Bug report #12066: font marker symbols wrong size in map units
Oskar Karlin wrote:
> From 1:74000 and up (more zoomed out) this behaviour appears. And for some reason it's only one...
Giovanni Manghi
02:00 PM Bug report #12770 (Closed): shapefile gets corrupted after editing
I think that the original report/description is duplicate of #11007, that will be fixed (hopefully) in time for the n... Giovanni Manghi
02:00 PM Bug report #12770 (Closed): shapefile gets corrupted after editing
I think that the original report/description is duplicate of #11007, that will be fixed (hopefully) in time for the n... Giovanni Manghi
01:56 PM Bug report #12770: shapefile gets corrupted after editing
Mohamed Houd wrote:
> I get the same problems when editing a shapefile that was created first under QGIS 2.6 and open...
Giovanni Manghi
01:52 PM Bug report #5321 (Open): Inserting geometries using a WFS-T of ArcGIS Server
Giovanni Manghi
01:41 PM Bug report #12895: QGIS 2.8.1 freezes when saving data
see also #13963 Giovanni Manghi
01:24 PM Bug report #12895: QGIS 2.8.1 freezes when saving data
still an issue on the latest qgis releases?
Can you attach a sample project with data to allow us try replicate the ...
Giovanni Manghi
01:38 PM Bug report #5748 (Closed): QgsRasterLayer::setDrawingStyle() doesn't work
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
01:38 PM Bug report #5748 (Closed): QgsRasterLayer::setDrawingStyle() doesn't work
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
01:20 PM Bug report #10322: Scalebar bug in print composer
can anyone say if this is still an issue in the latest releases?
If yes, can anyone attach a project with layouts *an...
Giovanni Manghi
01:19 PM Bug report #4001 (Closed): addJoinedFeatureAttributes converts join value in substring to string ...
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> is it still true for QGIS 2.13 (master) ? The code has been heavil...
Giovanni Manghi
01:19 PM Bug report #4001 (Closed): addJoinedFeatureAttributes converts join value in substring to string ...
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> is it still true for QGIS 2.13 (master) ? The code has been heavil...
Giovanni Manghi
01:16 PM Bug report #6369 (Open): vsizip - relative paths not used & can't update path in "missing layers"...
Giovanni Manghi
01:14 PM Bug report #12774 (Closed): Attribute table only show first 99 rows from SQL Server views
Giovanni Manghi
01:12 PM Bug report #13490 (Open): PostGIS: Merge drops dataset whereas split retains it
Giovanni Manghi
01:08 PM Feature request #8387 (Open): Warn users when saving projects that contain memory/scratch layers
Giovanni Manghi
01:03 PM Bug report #13835 (Closed): Shapefiles with EPSG 2926 and 2927 Washington State Plane North and S...
clifford snow wrote:
> Typically I don't see authority parameters in .prj files. For example below is an ogrinfo repo...
Giovanni Manghi
01:03 PM Bug report #13835 (Closed): Shapefiles with EPSG 2926 and 2927 Washington State Plane North and S...
clifford snow wrote:
> Typically I don't see authority parameters in .prj files. For example below is an ogrinfo repo...
Giovanni Manghi
12:59 PM Bug report #12171 (Open): Processing Refactor fields: can't change an "int" field to "double" wit...
Still true on master, please change the category if it is a QGIS issue rather than a Processing one. Giovanni Manghi
12:01 PM Feature request #13814 (Open): Processing: use sqlite/spatialite as intermediate format
Giovanni Manghi
11:10 AM Bug report #14038: open graphical modeler models
Please let us know which Processing version (not same as QGIS version!) you are using.
I can only confirm that the m...
Anita Graser
09:32 AM Bug report #14038: open graphical modeler models
System is Win7 64bit on both machines.
I tried different QGIS versions on both machines to make it work(same version,...
christian user
04:19 AM Bug report #14038 (Feedback): open graphical modeler models
Are you copying the model between the same OS?
The different systems are using the *same* Processing version?
Can y...
Giovanni Manghi
04:19 AM Bug report #14038 (Feedback): open graphical modeler models
Are you copying the model between the same OS?
The different systems are using the *same* Processing version?
Can y...
Giovanni Manghi
02:42 AM Bug report #14038 (Closed): open graphical modeler models
Hi there I'm trying to open models I saved on another system. Unfortunately QGIS refuses to open the models. Opening ... christian user
07:57 AM Bug report #10042: QGIS 2.2 randomly crashing when panning a project with lots of data
Just a note that multithreading was integrated in 2.4 so it can't affect version 2.2 Martin Dobias
05:12 AM Bug report #11596: SVG markers have black border when exported as svg through print composer
what is the status of this issue? Giovanni Manghi
05:07 AM Bug report #11390 (Open): Attribute table in map composer : set column width to automatic is not ...
Giovanni Manghi
04:59 AM Bug report #13278: Qgis crash saving postgis layer
Jürgen Fischer wrote:
> Anibal Alarcon Acosta wrote:
> > When the restore is full the problem is the same. I can give...
Giovanni Manghi
04:21 AM Bug report #12373 (Open): exporting 3D Postgis layer to shapefile loses the Z value
see also #14006 Giovanni Manghi
04:21 AM Bug report #12373 (Open): exporting 3D Postgis layer to shapefile loses the Z value
see also #14006 Giovanni Manghi
04:20 AM Bug report #14006: Can't export layers from Postgis tables with Z component geometries
is this a regression also compared to #12373 ? Giovanni Manghi
04:11 AM Bug report #11622 (Closed): Crash with new feature selecting a polygon between some layers with r...
there was an issue (causing a crash) with the right click identify on map canvas, but this was solved around the time... Giovanni Manghi
04:11 AM Bug report #11622 (Closed): Crash with new feature selecting a polygon between some layers with r...
there was an issue (causing a crash) with the right click identify on map canvas, but this was solved around the time... Giovanni Manghi
04:08 AM Bug report #5851 (Closed): WMS projection from EPSG:4326 to EPSG:900913 cut part of the layer
yes, seems fixed in master (while is still not ok on 2.8.5). Giovanni Manghi
04:08 AM Bug report #5851 (Closed): WMS projection from EPSG:4326 to EPSG:900913 cut part of the layer
yes, seems fixed in master (while is still not ok on 2.8.5). Giovanni Manghi
03:59 AM Bug report #14037 (Open): frequent crash when editing data in relation forms (standard relation f...
Giovanni Manghi
03:56 AM Bug report #13977 (Feedback): QgsVectorFileWriter: bug at saving vector layer to shapefile
Giovanni Manghi
02:23 AM Bug report #10794 (Reopened): Processing: Lines disappearing in Modeler
sorry but still not fixed, at least in Versions 2.8.5 LTR, 2.12.1 christian user
02:23 AM Bug report #10794 (Reopened): Processing: Lines disappearing in Modeler
sorry but still not fixed, at least in Versions 2.8.5 LTR, 2.12.1 christian user

2015-12-26

12:57 AM Bug report #14028: CurvePolygons not drawn
QGIS 2.12.2 works. zicke -
03:50 AM Bug report #14028: CurvePolygons not drawn
commit:6a7f786 is already broken. zicke -
09:11 PM Bug report #13977: QgsVectorFileWriter: bug at saving vector layer to shapefile
Use one of the following filenames to avoid Python escape sequence conversion of \\t to TAB in your filename:
"C:\\\...
Simon Chenery
02:20 PM Feature request #14035: circular string show vertex for curve center as X or other means
Note the hotkey _R_ (hold it down) that displays a Pacman-like pattern to indicate the circle center.
!QgisPacman.png...
Sebastian Dietrich
02:05 PM Bug report #12757 (Reopened): Zoom out crashes QGIS
This issue has also been reported for QGIS 2.8.4 in "Debian Bug #809063":https://bugs.debian.org/809063, I've confirm... Bas Couwenberg
02:01 PM Bug report #14008: Crash zooming to wide extent
Isn't this the same issue as #12757?
Backporting the fix to release-2_8 should resolve this issue then.
Bas Couwenberg
12:00 PM Bug report #14037: frequent crash when editing data in relation forms (standard relation form-wid...
In QGIS 2.10, all worked fine without problems. Gerhard Spieles
07:19 AM Bug report #14037: frequent crash when editing data in relation forms (standard relation form-wid...
In QGIS 2.12.2, crash occurs also (see attached jpg). In 2.12.2 the data in embeded forms are not schown and when you... Gerhard Spieles
07:19 AM Bug report #14037: frequent crash when editing data in relation forms (standard relation form-wid...
In QGIS 2.12.2, crash occurs also (see attached jpg). In 2.12.2 the data in embeded forms are not schown and when you... Gerhard Spieles
07:19 AM Bug report #14037: frequent crash when editing data in relation forms (standard relation form-wid...
In QGIS 2.12.2, crash occurs also (see attached jpg). In 2.12.2 the data in embeded forms are not schown and when you... Gerhard Spieles
04:50 AM Bug report #14037: frequent crash when editing data in relation forms (standard relation form-wid...
I would let it as blocker, we encounter such crashes, but they are very difficult to catch and reproduce. We also hav... Regis Haubourg
11:13 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
another round of tests on this (on several different Linux flavors), no issues, not even on Debian Jessie and QGIS ma... Giovanni Manghi
10:29 AM Bug report #5498 (Closed): Make the default directory to the users "home" directory after a fresh...
yes fixed. Giovanni Manghi
10:29 AM Bug report #5498 (Closed): Make the default directory to the users "home" directory after a fresh...
yes fixed. Giovanni Manghi
09:58 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
Confirmed: thanks! Alessandro Pasotti
07:46 AM Bug report #11298 (Closed): customize render combobox
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
07:46 AM Bug report #11298 (Closed): customize render combobox
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
07:42 AM Bug report #13857 (Closed): Default values on a PG table: type cast appended
Fixed in changeset commit:"4c3cf64f01af32511ef5fc56b0b13aa705c00dd6". Jürgen Fischer
07:38 AM Bug report #10828 (Open): project loading and adding/removing layers is slow if project has compo...
see also #12125 and in particular #12125-17
Giovanni Manghi
07:38 AM Bug report #10828 (Open): project loading and adding/removing layers is slow if project has compo...
see also #12125 and in particular #12125-17
Giovanni Manghi
07:38 AM Bug report #10828 (Open): project loading and adding/removing layers is slow if project has compo...
see also #12125 and in particular #12125-17
Giovanni Manghi
07:38 AM Bug report #10828 (Open): project loading and adding/removing layers is slow if project has compo...
see also #12125 and in particular #12125-17
Giovanni Manghi
07:37 AM Bug report #12125 (Closed): Very poor performance with complex projects (saving, adding/removing ...
duplicate of #10828 Giovanni Manghi
07:37 AM Bug report #12125 (Closed): Very poor performance with complex projects (saving, adding/removing ...
duplicate of #10828 Giovanni Manghi
07:30 AM Bug report #10042: QGIS 2.2 randomly crashing when panning a project with lots of data
Can someone test now with one of the latest releases/master? this could have been triggered by issues with multithrea... Giovanni Manghi
07:08 AM Bug report #12686 (Closed): layer.featureAdded triggered on Feature Attribute Dialog confirm
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
07:07 AM Bug report #13584: Vertices snap to other when "Enable topological editing" is active
From the description is very difficult to understand what is/was the reported issue. A screencast would be much more ... Giovanni Manghi
06:56 AM Bug report #13809 (Open): [Mint, Cinnamon DE] Properties dialog for layers panel is not a floatin...
Giovanni Manghi
06:54 AM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
@('now'::text)::date@
do not work on 2.8.*, not sure on 2.10, and not sure if it has any importance for this report.
Giovanni Manghi
06:46 AM Feature request #5137 (Open): Allow save results from RoadGraph plugin as an OGR datasource (othe...

> In your bug report, would you mean to have the ability to export directly to a new file (with OGR provider) ?
I g...
Giovanni Manghi
06:46 AM Feature request #5137 (Open): Allow save results from RoadGraph plugin as an OGR datasource (othe...

> In your bug report, would you mean to have the ability to export directly to a new file (with OGR provider) ?
I g...
Giovanni Manghi
06:46 AM Feature request #5137 (Open): Allow save results from RoadGraph plugin as an OGR datasource (othe...

> In your bug report, would you mean to have the ability to export directly to a new file (with OGR provider) ?
I g...
Giovanni Manghi
06:37 AM Bug report #3714 (Open): Qt arguments are not supported
Giovanni Manghi
06:36 AM Bug report #4506 (Closed): Possible Malformation/redundancy on that PS code inside exported PDF f...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
06:36 AM Bug report #4506 (Closed): Possible Malformation/redundancy on that PS code inside exported PDF f...
closing for lack of feedback, please reopen if necessary. Giovanni Manghi
06:34 AM Bug report #7745 (Open): Please use grass-doc from local files, not from the web
Paolo Cavallini wrote:
> Fixed now?
https://github.com/qgis/QGIS/blob/master/python/plugins/processing/algs/grass7/G...
Giovanni Manghi
06:34 AM Bug report #7745 (Open): Please use grass-doc from local files, not from the web
Paolo Cavallini wrote:
> Fixed now?
https://github.com/qgis/QGIS/blob/master/python/plugins/processing/algs/grass7/G...
Giovanni Manghi
06:07 AM Bug report #10636 (Feedback): Translation for command description and help in Processing: GRASS a...
I can't find any evidence that the HTML manual pages for GRASS modules are available in languages other than EN. Look... Giovanni Manghi
06:07 AM Bug report #10636 (Feedback): Translation for command description and help in Processing: GRASS a...
I can't find any evidence that the HTML manual pages for GRASS modules are available in languages other than EN. Look... Giovanni Manghi
06:07 AM Bug report #10636 (Feedback): Translation for command description and help in Processing: GRASS a...
I can't find any evidence that the HTML manual pages for GRASS modules are available in languages other than EN. Look... Giovanni Manghi
05:32 AM Bug report #13569 (Closed): memory leak in renderer
http://osgeo-org.1560.x6.nabble.com/Possible-memory-leak-in-QGIS-redraws-td5228794.html
suggest that this has been f...
Giovanni Manghi
05:32 AM Bug report #13569 (Closed): memory leak in renderer
http://osgeo-org.1560.x6.nabble.com/Possible-memory-leak-in-QGIS-redraws-td5228794.html
suggest that this has been f...
Giovanni Manghi
05:30 AM Bug report #6686 (Feedback): Embedded layers from projects with groups misbehaving
Giovanni Manghi
05:09 AM Bug report #6686: Embedded layers from projects with groups misbehaving
I can not reproduce using current master (commit:917dd055198f52b6288210d0a11f304aeacc2976). Can you test with master/... Sebastian Dietrich
05:17 AM Bug report #13913: Embed layers and groups does not work properly with layer duplicate names
Additionally I encountered the following error:
If you have two or more groups with identical names QGIS always embed...
Sebastian Dietrich
04:59 AM Bug report #14036: graduated rendering: classes' upper and lower values precision truncated when ...
Regis, I noticed that the natural break function will only deal with the full dataset if it has less than 1,000 featu... Mathieu Pellerin - nIRV
04:51 AM Bug report #14036: graduated rendering: classes' upper and lower values precision truncated when ...
I already funded the same bug in early 2.x versions. We absolutely need a unit test here.
Regis Haubourg
04:52 AM Bug report #14024: DB Manager fails copying a LINESTRINGM
I Paolo, I dump and restore LINESTRINGM a lot here. Maybe you added a autocast conversion type in your postgres insta... Regis Haubourg
03:43 AM Bug report #5079 (Closed): Error adding WFS layer from an Intergraph WebMap WFS
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:43 AM Bug report #5079 (Closed): Error adding WFS layer from an Intergraph WebMap WFS
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:42 AM Bug report #5786 (Closed): "Text annotation" map tool not correctly interacting with other map tools
this seems fixed, please reopen if necessary. Giovanni Manghi
03:42 AM Bug report #5786 (Closed): "Text annotation" map tool not correctly interacting with other map tools
this seems fixed, please reopen if necessary. Giovanni Manghi

2015-12-25

12:41 AM Bug report #5087 (Closed): An action that makes the Identify Results dock appear forces a complet...
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> seems to be fixed, at least in QGIS 2.13 master in MS Windows 7 x6...
Giovanni Manghi
12:41 AM Bug report #5087 (Closed): An action that makes the Identify Results dock appear forces a complet...
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> seems to be fixed, at least in QGIS 2.13 master in MS Windows 7 x6...
Giovanni Manghi
12:33 AM Bug report #5602 (Closed): Identify disabled in WMS for grouped layers
closing for lack of feedback, reopen if necessary. Giovanni Manghi
12:33 AM Bug report #5602 (Closed): Identify disabled in WMS for grouped layers
closing for lack of feedback, reopen if necessary. Giovanni Manghi
12:31 AM Bug report #4645 (Closed): Changing multiple symbol colours at once is applied immediately to the...
seems really fixed now, please reopen if necessary. Giovanni Manghi
12:31 AM Bug report #4645 (Closed): Changing multiple symbol colours at once is applied immediately to the...
seems really fixed now, please reopen if necessary. Giovanni Manghi
12:29 AM Bug report #13857: Default values on a PG table: type cast appended
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > ('now'::text)::date
> >
> > (in a date column of course), works i...
Giovanni Manghi
12:23 AM Bug report #14037 (Feedback): frequent crash when editing data in relation forms (standard relati...
Hi, why blocker? it works fine in official qgis releases? Giovanni Manghi
10:42 AM Bug report #14037 (Closed): frequent crash when editing data in relation forms (standard relation...
When I edit data in in the subform of the standard generated form, qgis often crashes.
A jpg that shows a form in edi...
Gerhard Spieles
09:14 PM Bug report #14036 (Closed): graduated rendering: classes' upper and lower values precision trunca...
Fixed in commit:8ff4c78. Mathieu Pellerin - nIRV
09:14 PM Bug report #14036 (Closed): graduated rendering: classes' upper and lower values precision trunca...
Fixed in commit:8ff4c78. Mathieu Pellerin - nIRV
09:14 PM Bug report #14036 (Closed): graduated rendering: classes' upper and lower values precision trunca...
Fixed in commit:8ff4c78. Mathieu Pellerin - nIRV
07:58 PM Bug report #14036: graduated rendering: classes' upper and lower values precision truncated when ...
Ok, I figured out where the problem was, and opened a PR which fixes things (see https://github.com/qgis/QGIS/pull/26... Mathieu Pellerin - nIRV
01:04 AM Bug report #14036 (Closed): graduated rendering: classes' upper and lower values precision trunca...
This one is quite odd, and can be quite tricky for users (as it will change the map symbology rendering on project re... Mathieu Pellerin - nIRV

2015-12-24

12:20 AM Bug report #14001 (Closed): Crash in QGIS Server running without project in CGI mode
Fixed in changeset commit:"036eada9903d4e658fe7fcb6c399b61598665d7a". Anonymous
08:49 PM Bug report #13299 (Closed): Slow saving to network drive
Fixed in changeset commit:"4530c2abbedc318be1e290ef9ed8ad020ede94b7". Jürgen Fischer
11:02 AM Bug report #13299: Slow saving to network drive
Giovanni Manghi wrote:
> Very interesting, could you please write your notes in the developers mailing list? thanks!
...
Jürgen Fischer
04:11 PM Bug report #11307: Default transparency for selections not honored
Can you please test using current master? This should be fixed by commit:46bc85ae635cc07209627712157abe06d9850636. Sebastian Dietrich
03:45 PM Feature request #14035 (Closed): circular string show vertex for curve center as X or other means
Probaby useful to know where the arc center is when drawing it and for snapping options, like snap to circle center Antonio Locandro
03:41 PM Feature request #14034 (Feedback): Circular string add option to add close circle
Subject pretty clear, option to create a circle of given radius or define circle center and click to snap to another ... Antonio Locandro
03:38 PM Bug report #13683: DBManager doesn't work with the new authentication system
See #13841, which is a duplicate of this bug? There is a patch ("PR 2473":https://github.com/qgis/QGIS/pull/2473) sup... Sebastian Dietrich
03:32 PM Bug report #14033 (Closed): Circular string doesn't snap
When using the circular string option, it does not honor snapping Antonio Locandro
01:47 PM Bug report #13857: Default values on a PG table: type cast appended
Giovanni Manghi wrote:
> ('now'::text)::date
>
> (in a date column of course), works if adding a record in pgadmin (...
Jürgen Fischer
10:40 AM Bug report #13857 (Feedback): Default values on a PG table: type cast appended
I cannot confirm the specific issue described here, a default defined as
'test123'::character varying
returns as ex...
Giovanni Manghi
10:41 AM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
Jürgen Fischer wrote:
> Doing what in QGIS exactly?
see #13857-11
Giovanni Manghi
06:01 AM Bug report #13994 (Closed): QGIS /forget/ignore settings, for coloropacity in options/canvaslegen...
Fixed in changeset commit:"2415e37d19b6343e3ef45c106e6ab0f001a30c91". Anonymous
05:55 AM Bug report #13994: QGIS /forget/ignore settings, for coloropacity in options/canvaslegend/selecti...
The color (including the alpha channel) is correctly written to the project file, but the alpha channel is not read b... Sebastian Dietrich
05:29 AM Bug report #14030: Filter expressions to postgres provider
I think that the forms with relations were never actually using the expression compiler IIRC. Matthias Kuhn

2015-12-23

09:35 PM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still very much true, see attached. Paolo Cavallini
09:35 PM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still very much true, see attached. Paolo Cavallini
12:24 PM Bug report #9818 (Closed): Crash when launching globe
Fixed in changeset commit:"13a5167b4350485f04dbb65aa5bce5d10f25d8a2". Jürgen Fischer
08:14 AM Bug report #9818: Crash when launching globe
This issue was also reported in "Debian Bug #808817":https://bugs.debian.org/808817, since the crash is solved by hav... Bas Couwenberg
12:20 PM Bug report #14032 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
see #14016 Giovanni Manghi
12:20 PM Bug report #14032 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
see #14016 Giovanni Manghi
07:13 AM Bug report #14032 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Hi!
Win 7 sp1 x64, qgis x64 rev. 06553db
When I change values in "Options/Digitizing/Rubberband/Line color&Fill col...
Piotr Kania
12:16 PM Feature request #13570 (Closed): size varying assistant not available for line layers
Giovanni Manghi
02:12 AM Feature request #13570: size varying assistant not available for line layers
solved in master Regis Haubourg
12:12 PM Feature request #5560 (Closed): add option for field display order in identify window
Giovanni Manghi
08:08 AM Feature request #5560: add option for field display order in identify window
Hi, I don't have rights to close tickets. Can anyone close this one? Regis Haubourg
11:33 AM Feature request #9346 (Closed): DBManager allow to add non geographical queries to canvas
Giovanni Manghi
08:12 AM Feature request #9346: DBManager allow to add non geographical queries to canvas
Christmas cleaning crisis : can be closed! Regis Haubourg
08:22 AM Bug report #13406: Inverted polygon renderer and shapeburst fill create ghost borders in qgis ser...
lowering priority, we can use untiled layers for such use cases. Regis Haubourg
08:21 AM Feature request #8220: Add XLS and KMZ in Ogr supported file filter AND browser
Hi guys, still cleaning old requests. I have seen no change in that area in GDAL topic pointed by Jürgen. Are you sti... Regis Haubourg
07:23 AM Bug report #14030: Filter expressions to postgres provider
In fact, on my map canvas, i use the button "Identify Features" to visualize some datas edited with the "drag and dro... Edward H
05:22 AM Bug report #14030 (Feedback): Filter expressions to postgres provider
Which expression? Matthias Kuhn
02:31 AM Bug report #14030 (Closed): Filter expressions to postgres provider
Option "Execute expressions on postgres server side if possible" (in Options>Data Sources) works perfectly in QGIS 2.... Edward H
07:23 AM Bug report #14028: CurvePolygons not drawn
Yes. Worked before. But don't know which commit breaks it. zicke -
01:15 AM Bug report #14028 (Feedback): CurvePolygons not drawn
why blocker, is a regression? Giovanni Manghi
07:04 AM Bug report #14029 (Feedback): Server crash upon first read of a project
Jürgen Fischer
04:32 AM Bug report #14029: Server crash upon first read of a project
1. I have only PostGIS layers, so I cannot tell whether the problem is also with other sources (the Lizmap demo, base... Paolo Cavallini
03:36 AM Bug report #14029: Server crash upon first read of a project
Please include steps to reproduce (sample setup?). What's the difference between the projects that work to the proj... Jürgen Fischer
06:28 AM Bug report #14016 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Fixed in changeset commit:"c465705f0199fa75048242c5ae6752e35ad69862". Stéphane Brunner
01:21 AM Bug report #14016: Changes in "Options/Digitizing/Rubberband/Line color" doesn't change backgroun...
Should be fixed with: https://github.com/qgis/QGIS/pull/2608 Stéphane Brunner
04:57 AM Bug report #14031: refresh WFS option (using current extent)
Clarification: on 2.8.x once a non-caching WFS been loaded at full extent it won't be reloaded anymore. Kay Warrie
04:44 AM Bug report #14031 (Closed): refresh WFS option (using current extent)
My employer has several WFS with very large datasets.
(Example, this one: https://www.dov.vlaanderen.be/geoserver/dov...
Kay Warrie
04:45 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...
A more specific explanation of the problem:
A "serial" data type in PostgreSQL is syntactic sugar for "integer NOT N...
Bo Victor Thomsen
03:00 AM Bug report #12146: Join tables are not shown in form defined by Drag and drop designer
Just tested with QGIS 2.12.2 and it looks much better now:
now attributes are shown on form but *labels* are missing.
Artur Lill
01:13 AM Bug report #12146 (Reopened): Join tables are not shown in form defined by Drag and drop designer
Giovanni Manghi
02:09 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
Update: testing e6a265c1030bae01aa8d0eca905693e371ff0bd7
CGI still crashes with the same error:...
Alessandro Pasotti
01:25 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
Just tested with python disabled: still crashing. Alessandro Pasotti
01:10 AM Bug report #14020 (Closed): DB Manager and Browser cannot delete materialized views
Giovanni Manghi
01:09 AM Feature request #6377 (Closed): r.reclass path to reclass rules within modeler
Médéric RIBREUX

2015-12-22

12:38 AM Bug report #12146: Join tables are not shown in form defined by Drag and drop designer
I confirm that this bug is Not Fixed Yet:
1. *Attribute editor layout* is set to *Drag and Drop designer*.
2. I added...
Artur Lill
12:26 AM Bug report #14029: Server crash upon first read of a project
Can you be more precise :
Do you have problems with other QGIS Provider (OGR: ESRI Shapefile, etc) or only with PostG...
René-Luc ReLuc
11:18 PM Bug report #14029: Server crash upon first read of a project
2.8.4 reinstalled, I confirm, it's a regression. Paolo Cavallini
10:23 PM Bug report #14029 (Closed): Server crash upon first read of a project
On the same server installation, Debian stable, QGIS 2.8.5, a few projects (including Lizmap demo) work, whereas othe... Paolo Cavallini
09:56 PM Bug report #14028 (Closed): CurvePolygons not drawn
CurvePolygons from PostGIS are not drawn in the mapcanvas if they do not contain a curve/arc.
zicke -
05:46 PM Feature request #14027 (Open): save as KML data source options should use field list dropdown widget
It'd be nice for the DescriptionField and NameField data source options (in the "Save as..." dialog) to make use of t... Mathieu Pellerin - nIRV
04:42 PM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
Giovanni Manghi wrote:
> then there is something wrong, at least on 2.8.4:
> I just tested and if I have a default i...
Jürgen Fischer
02:38 PM Bug report #13952: QGIS node tool causes snapping another feature randomly
It is same issue I've noticed in earlier versions (look at issue #10957 dig3.png).
More, it happens only if I have m...
Jakub Kosik
12:21 PM Feature request #6494: "Show selected features" setting should cooperate with the override in the...
Interesting. If in QGIS settings I select "show visible features", in the attribute table I have the option "Show al... Alister Hood
06:47 AM Feature request #6494 (Closed): "Show selected features" setting should cooperate with the overri...
Hello, bug triage...
in QGIS 2.13 master (and probably in 2.12.1), the Attribute table behavior setting only affects...
Médéric RIBREUX
06:47 AM Feature request #6494 (Closed): "Show selected features" setting should cooperate with the overri...
Hello, bug triage...
in QGIS 2.13 master (and probably in 2.12.1), the Attribute table behavior setting only affects...
Médéric RIBREUX
06:47 AM Feature request #6494 (Closed): "Show selected features" setting should cooperate with the overri...
Hello, bug triage...
in QGIS 2.13 master (and probably in 2.12.1), the Attribute table behavior setting only affects...
Médéric RIBREUX
12:16 PM Feature request #2987: Auto GCP detection library
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> I am closing this feature request for lack of feedback and because...
Alister Hood
05:11 AM Feature request #2987 (Closed): Auto GCP detection library
Hello, bug triage...
I am closing this feature request for lack of feedback and because it seems that AutoGCP has be...
Médéric RIBREUX
05:11 AM Feature request #2987 (Closed): Auto GCP detection library
Hello, bug triage...
I am closing this feature request for lack of feedback and because it seems that AutoGCP has be...
Médéric RIBREUX
12:12 PM Bug report #14024 (Closed): DB Manager fails copying a LINESTRINGM
It turns out to be a PostGIS issue, sending upstream Paolo Cavallini
12:12 PM Bug report #14024 (Closed): DB Manager fails copying a LINESTRINGM
It turns out to be a PostGIS issue, sending upstream Paolo Cavallini
12:09 PM Bug report #14020: DB Manager and Browser cannot delete materialized views
See also #13829 Paul Kanelli
11:53 AM Bug report #6561 (Open): 'cubic' resambling for "zoomed in" (scale > 100%) rasters creates undesi...
Nyall Dawson
11:53 AM Bug report #6561: 'cubic' resambling for "zoomed in" (scale > 100%) rasters creates undesired vis...
It's still an issue - as per the commit note above, it's now only visible on image edges. Nyall Dawson
09:33 AM Bug report #6561 (Feedback): 'cubic' resambling for "zoomed in" (scale > 100%) rasters creates un...
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master . Can you confirm ?
Médéric RIBREUX
11:35 AM Feature request #6377: r.reclass path to reclass rules within modeler
Hi Médéric,
You are absolutely right! Thank you very much!
Can someone with sufficient privileges close this featur...
Pedro Venâncio
10:11 AM Feature request #6667 (Closed): save map tips status configuration
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions): the setting showTips is ...
Médéric RIBREUX
10:11 AM Feature request #6667 (Closed): save map tips status configuration
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions): the setting showTips is ...
Médéric RIBREUX
10:11 AM Feature request #6667 (Closed): save map tips status configuration
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions): the setting showTips is ...
Médéric RIBREUX
10:11 AM Bug report #13857 (Open): Default values on a PG table: type cast appended
This refers to the PK issue, not to the main one, which is still valid. Paolo Cavallini
09:52 AM Feature request #6626 (Closed): merge and publishing
Hello, bug triage...
I am closing this feature request for lack of feedback and vague description.
Feel free to reo...
Médéric RIBREUX
09:52 AM Feature request #6626 (Closed): merge and publishing
Hello, bug triage...
I am closing this feature request for lack of feedback and vague description.
Feel free to reo...
Médéric RIBREUX
09:46 AM Feature request #6605 (Closed): Image not exported to PDF
Hello, bug triage...
with QGIS 2.13 (and probably with earlier versions) I can perfectly add a picture/image in a co...
Médéric RIBREUX
09:46 AM Feature request #6605 (Closed): Image not exported to PDF
Hello, bug triage...
with QGIS 2.13 (and probably with earlier versions) I can perfectly add a picture/image in a co...
Médéric RIBREUX
09:46 AM Feature request #6605 (Closed): Image not exported to PDF
Hello, bug triage...
with QGIS 2.13 (and probably with earlier versions) I can perfectly add a picture/image in a co...
Médéric RIBREUX
09:25 AM Feature request #6580 (Feedback): Save Layer Metadata Title and Abstract
Hello, bug triage...
what do we do with this bug ? Metadata data information is stored in QLR files (at least title,...
Médéric RIBREUX
09:25 AM Feature request #6580 (Feedback): Save Layer Metadata Title and Abstract
Hello, bug triage...
what do we do with this bug ? Metadata data information is stored in QLR files (at least title,...
Médéric RIBREUX
08:07 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
The good is that with latest master I can now reproduce it in the Qt-Creator debugger, the bad is that it still segfa... Alessandro Pasotti
07:41 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
Pushed a commit to master that prevents from copying QgsSymbolV2 (that would be a possible reason for this crash. In ... Matthias Kuhn
07:28 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
I'm pretty sure it's related to
static QgsMarkerSymbolV2 sSkipRender;
in qgscategorizedsymbolrendererv2.h
It may h...
Matthias Kuhn
08:04 AM Bug report #14010 (Reopened): Converting to Offline Editing of WFS-T layer causes minidump
Giovanni Manghi
05:26 AM Bug report #14010: Converting to Offline Editing of WFS-T layer causes minidump
Giovanni Manghi wrote:
>
> I have found no evidence that this tools was ever intended to be used with wfs-t. Do you e...
Drew Nix
08:01 AM Bug report #4943 (Closed): Georeferenced plugin don't put projection into tif
this report is quite old and the georeferencer got several bug fixes along the time, even quite recently. Reopen if n... Giovanni Manghi
08:01 AM Bug report #4943 (Closed): Georeferenced plugin don't put projection into tif
this report is quite old and the georeferencer got several bug fixes along the time, even quite recently. Reopen if n... Giovanni Manghi
07:50 AM Bug report #13863: Complex Polygon not displayed on screen if it can not be displayed entirely
will be fixed with https://github.com/qgis/QGIS/pull/2606 Giovanni Manghi
07:50 AM Bug report #13862: Labels are not displayed on Layers with "cut-outs"
will be fixed with https://github.com/qgis/QGIS/pull/2606 Giovanni Manghi
07:50 AM Bug report #13862: Labels are not displayed on Layers with "cut-outs"
will be fixed with https://github.com/qgis/QGIS/pull/2606 Giovanni Manghi
07:50 AM Bug report #13862: Labels are not displayed on Layers with "cut-outs"
will be fixed with https://github.com/qgis/QGIS/pull/2606 Giovanni Manghi
07:46 AM Feature request #6579 (Feedback): Scale selector vs Coordinate box width
Hello, bug triage...
we perhaps need to extend the size of the scale QComboBox but if we do this, we should also inc...
Médéric RIBREUX
07:34 AM Feature request #6558: Split-pane entry and output for PyQGIS console
Hello, bug triage...
I think we can close this feature request because every point is covered in the Python console....
Médéric RIBREUX
07:30 AM Bug report #6552 (Closed): WFS client: Filter Element contains incoherent XML Namespaces
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions). Now, the filter request ...
Médéric RIBREUX
07:30 AM Bug report #6552 (Closed): WFS client: Filter Element contains incoherent XML Namespaces
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions). Now, the filter request ...
Médéric RIBREUX
07:30 AM Bug report #6552 (Closed): WFS client: Filter Element contains incoherent XML Namespaces
Hello, bug triage...
this is fixed in QGIS 2.13 master (and probably in previous versions). Now, the filter request ...
Médéric RIBREUX
07:27 AM Bug report #13065 (Feedback): WFS 1.0.0 Client requests with a GML component fail against Geoserv...
Hello, bug triage...
this is also true for an attribute filter (tested on QGIS 2.13 master):...
Médéric RIBREUX
07:27 AM Bug report #13065 (Feedback): WFS 1.0.0 Client requests with a GML component fail against Geoserv...
Hello, bug triage...
this is also true for an attribute filter (tested on QGIS 2.13 master):...
Médéric RIBREUX
07:16 AM Bug report #14026 (Closed): DBManager Import layer/file to Oracle not working - Error 8 Loading o...
QGIS 2.12.0 - DB Manager 0.1.20 - Windows 7 - Oracle 11g 11.2.0.3.0
Import vector layer, shape file as well as a lay...
Armando Forlani
07:10 AM Bug report #14002 (Closed): regression: attribute table opens to form view
Mathieu Pellerin - nIRV
07:10 AM Bug report #14002: regression: attribute table opens to form view
Yes, fixed in commit:bc30075 shortly after this issue was filed. Closing. Mathieu Pellerin - nIRV
07:00 AM Bug report #14002: regression: attribute table opens to form view
Isn't this already fixed in master? Alessandro Pasotti
07:03 AM Bug report #14025: Crash when loading project with custom renderer for vector layers
Not sure, but this could be the problem:
src/core/symbology-ng/qgssinglesymbolrendererv2.cpp:458...
Alessandro Pasotti
06:26 AM Bug report #14025 (Closed): Crash when loading project with custom renderer for vector layers
I have custom renderer for vector layers, and can save project including information about this custom renderer. But ... Alexander Bruy
06:41 AM Bug report #14021 (Closed): changing a value in the advanced settings editor makes qgis crash
Fixed in commit:ca37d004ac Alessandro Pasotti
06:41 AM Bug report #14021 (Closed): changing a value in the advanced settings editor makes qgis crash
Fixed in commit:ca37d004ac Alessandro Pasotti
05:59 AM Bug report #14021: changing a value in the advanced settings editor makes qgis crash
Fixed in https://github.com/qgis/QGIS/pull/2607 Alessandro Pasotti
05:50 AM Bug report #14021 (In Progress): changing a value in the advanced settings editor makes qgis crash
Alessandro Pasotti
06:39 AM Bug report #6481 (Feedback): ftools function "Export/Add geometry columns" produces incorrect dba...
Hello, bug triage...
I am sorry for such a late answer but do you have any DBase reference about the maximum number ...
Médéric RIBREUX
06:37 AM Feature request #11733: add "add Data" functionality

Note that current efforts around link types can be found in https://github.com/OSGeo/Cat-Interop/blob/master/LinkPro...
Tom Kralidis
06:20 AM Feature request #11733: add "add Data" functionality
Hi
I'd like contribute with this functionality.
My idea is to implement the reading of the "missing" protocols (we ha...
jorge luis infante
06:21 AM Bug report #13973: Crash when switching from custom renderer to another
Ok, I solved issue with crash when switching from custom renderer to standard. But there stll get Python error when s... Alexander Bruy
06:08 AM Bug report #13299: Slow saving to network drive
Jakob Lanstorp wrote:
> #11211 is the same problem as this issue.
>
> This problem is due to how QGIS writes some of...
Giovanni Manghi
06:07 AM Bug report #13299: Slow saving to network drive
see also #11211 Giovanni Manghi
06:07 AM Bug report #11211 (Closed): Save QGIS project on VPN connection is very slow
duplicate of #13299 Giovanni Manghi
06:07 AM Bug report #11211 (Closed): Save QGIS project on VPN connection is very slow
duplicate of #13299 Giovanni Manghi
05:47 AM Bug report #14015 (Closed): Saving categorized style into Postgresql causes crash on QGIS master
it now work ok on the latest master. Thanks! Giovanni Manghi
05:47 AM Bug report #14015 (Closed): Saving categorized style into Postgresql causes crash on QGIS master
it now work ok on the latest master. Thanks! Giovanni Manghi
03:50 AM Bug report #14015: Saving categorized style into Postgresql causes crash on QGIS master
Cannot reproduce with current master.
You might want to add a step-by-step instructions to reproduce.
Alessandro Pasotti
05:46 AM Feature request #6450: Allow QGIS to 'guess' field types for calculated fields in spatialite views
Oops, sorry for the noise: I've made tests with calculated fields and QGIS don't recognise them (even with a CAST fun... Médéric RIBREUX
05:36 AM Feature request #6450 (Feedback): Allow QGIS to 'guess' field types for calculated fields in spat...
Hello, bug triage...
in QGIS 2.13 master (and probably in 2.12.1), when I make a SQLite view, QGIS find attribute ty...
Médéric RIBREUX
05:28 AM Bug report #3777 (Open): Attribute table record selection
Médéric RIBREUX
05:28 AM Feature request #3759 (Open): Random points in symbol layer properties
Médéric RIBREUX
05:26 AM Feature request #3703 (Open): improvement of spatial selection
Médéric RIBREUX
05:26 AM Feature request #3619 (Open): [FEATURE] Extended tooltips for tool bars
Médéric RIBREUX
05:25 AM Feature request #3584 (Open): Select features by radius should display current radius
Médéric RIBREUX
05:25 AM Feature request #3572 (Open): Handling of symbology load error on project load
Médéric RIBREUX
05:24 AM Feature request #3567 (Open): Thousands separator
Médéric RIBREUX
05:24 AM Feature request #3525 (Open): Auto resize label box in composer to fit it's contents
Médéric RIBREUX
05:23 AM Bug report #14023 (Closed): QgisCloud
anyway this must be filed in the qgiscloud tracker, not here. cheers! Giovanni Manghi
05:23 AM Bug report #14023 (Closed): QgisCloud
anyway this must be filed in the qgiscloud tracker, not here. cheers! Giovanni Manghi
05:00 AM Bug report #14023 (Feedback): QgisCloud
Hello, bug triage...
I am sorry but you need to report bugs in english (most developers are not french) ! Could you ...
Médéric RIBREUX
05:00 AM Bug report #14023 (Feedback): QgisCloud
Hello, bug triage...
I am sorry but you need to report bugs in english (most developers are not french) ! Could you ...
Médéric RIBREUX
05:23 AM Feature request #3524 (Open): Vector layer placement in leged on adding a new one
Médéric RIBREUX
05:22 AM Bug report #3489 (Open): Missing DB name in Add PostGis layer gives no useful warning
Médéric RIBREUX
05:22 AM Feature request #3486 (Open): Snapping for move tool
Médéric RIBREUX
05:22 AM Feature request #3474 (Closed): Add supporting any field for Singleparts to multipart tool
Hello, bug triage...
I am closing this feature request for lack of feedback and because Processing tool can do what ...
Médéric RIBREUX
05:22 AM Feature request #3474 (Closed): Add supporting any field for Singleparts to multipart tool
Hello, bug triage...
I am closing this feature request for lack of feedback and because Processing tool can do what ...
Médéric RIBREUX
05:20 AM Bug report #3456 (Open): Difference between vectors is empty if one of the inputs has errors
Médéric RIBREUX
05:18 AM Bug report #3333 (Closed): GdalTools: strange responsivenes of multiple files selector
Hello, bug triage...
I am closing this bug report for lack of feedback and because I can't find any "strange respons...
Médéric RIBREUX
05:18 AM Bug report #3333 (Closed): GdalTools: strange responsivenes of multiple files selector
Hello, bug triage...
I am closing this bug report for lack of feedback and because I can't find any "strange respons...
Médéric RIBREUX
05:15 AM Feature request #3331 (Open): GdalTools: add utilities for MapServer
Médéric RIBREUX
05:14 AM Feature request #3288 (Open): Enable stacked layers selection for "Simplify Feature"
Médéric RIBREUX
05:13 AM Feature request #3209 (Open): Set "Skip attribute creation" as a default setting when user choose...
Médéric RIBREUX
05:07 AM Feature request #1502 (Open): Allow vector symbol classification to affect outline color
Médéric RIBREUX
02:39 AM Bug report #13893 (Closed): Short arcs/curves have wrong center and radius and results big circle...
Applied to master branch. Thanks, Timo. Marco Hugentobler

2015-12-21

10:37 PM Bug report #14024 (Closed): DB Manager fails copying a LINESTRINGM
D&D between DBs fails for LINESTRINGM layers. It works well for LINESTRING. Paolo Cavallini
03:31 PM Bug report #13299: Slow saving to network drive
Same problem with 2.12, win7, 64bit.
when I save in localhost it takes 5 seconds, in network it delay more than 1 minute
Carlos Lopez Quintanilla
02:40 PM Bug report #14023: QgisCloud
Bonjour,
je viens de découvrir QgisCloud et d'uploader un projet.je constate que les couleurs de polygone sont détéri...
Pierre PierreLeLoup
02:37 PM Bug report #14023 (Closed): QgisCloud
Bonjour,
je viens de découvrir QgisCloud et d'uploader un projet.je constate que les couleurs de polygone sont détéri...
Pierre PierreLeLoup
01:21 PM Bug report #13862: Labels are not displayed on Layers with "cut-outs"
Yorck Neumann wrote:
> No, I can not see any grey / red rectangles.
>
> I have set up a new Test-Project just ha...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
01:17 PM Bug report #13863 (Feedback): Complex Polygon not displayed on screen if it can not be displayed ...
this polygon has a nasty error,
if trying to import it in postgis I get
Creation error for features from #0 to #0. P...
Giovanni Manghi
12:52 PM Bug report #13211 (Open): attribute table in print composer does not refresh
Giovanni Manghi
12:50 PM Bug report #11775 (Closed): Crash after simple zooming and panning map
duplicate of #11141 reopen if necessary. Giovanni Manghi
12:50 PM Bug report #11775 (Closed): Crash after simple zooming and panning map
duplicate of #11141 reopen if necessary. Giovanni Manghi
12:48 PM Bug report #13338 (Closed): problems with the style of simple markers in pointlayers in QGIS 2.10...
likely a local issue(?), please reopen if necessary. Giovanni Manghi
12:48 PM Bug report #13338 (Closed): problems with the style of simple markers in pointlayers in QGIS 2.10...
likely a local issue(?), please reopen if necessary. Giovanni Manghi
12:44 PM Bug report #13658 (Closed): Polygons disappear after saving
Rombert Stapel wrote:
> I haven't encountered the issue so far in 2.12. My CRS was almost identical to Daniele's sett...
Giovanni Manghi
12:44 PM Bug report #13658 (Closed): Polygons disappear after saving
Rombert Stapel wrote:
> I haven't encountered the issue so far in 2.12. My CRS was almost identical to Daniele's sett...
Giovanni Manghi
12:43 PM Bug report #13658: Polygons disappear after saving
mr twister wrote:
> #11007
this is a known issue that will be taken care for 2.14.
Giovanni Manghi
12:37 PM Bug report #14010: Converting to Offline Editing of WFS-T layer causes minidump
Drew Nix wrote:
> Based on the Documentation (http://docs.qgis.org/2.8/en/docs/user_manual/plugins/plugins_offline_ed...
Giovanni Manghi
05:10 AM Bug report #14010: Converting to Offline Editing of WFS-T layer causes minidump
Drew Nix wrote:
> Based on the Documentation (http://docs.qgis.org/2.8/en/docs/user_manual/plugins/plugins_offline_ed...
Giovanni Manghi
05:06 AM Bug report #14010: Converting to Offline Editing of WFS-T layer causes minidump
Based on the Documentation (http://docs.qgis.org/2.8/en/docs/user_manual/plugins/plugins_offline_editing.html), this ... Drew Nix
12:34 PM Bug report #13530: cpt-city ramps missing
Jeff Moyen wrote:
> > it is the plugin that indeed creates this variable.
> > So it seems that if the user needs real...
Giovanni Manghi
12:09 PM Bug report #13530: cpt-city ramps missing

> it is the plugin that indeed creates this variable.
> So it seems that if the user needs really to re-run the plug...
Jeff Moyen
11:45 AM Bug report #13530: cpt-city ramps missing

> My interpretation would be that at some point, something (QGIS or the plugin?) wrote in the registry, and that uni...
Giovanni Manghi
04:40 AM Bug report #13530: cpt-city ramps missing
You're absolutely right, It's gone now. Sorry for the misunderstanding.
See my comment #6 above : it was there after...
Jeff Moyen
02:35 AM Bug report #13530: cpt-city ramps missing
Jeff Moyen wrote:
> settings|options
>
> tab "advanced", all the way at the bottom ("advanced settings editor")
in ...
Giovanni Manghi
02:01 AM Bug report #13530: cpt-city ramps missing
settings|options
tab "advanced", all the way at the bottom ("advanced settings editor")
Jeff Moyen
01:40 AM Bug report #13530: cpt-city ramps missing

> 1) in options|advanced
where is this option?
cheers!
Giovanni Manghi
01:31 AM Bug report #13530: cpt-city ramps missing
Giovanni,
I don't believe so. Right now in Lyon I do have access to the cpt-city palettes (after the trick I explain...
Jeff Moyen
01:15 AM Bug report #13530 (Closed): cpt-city ramps missing
it seems to me that the location of the cpt pallettes is controlled by the "color ramp manager" plugin (see attached ... Giovanni Manghi
01:15 AM Bug report #13530 (Closed): cpt-city ramps missing
it seems to me that the location of the cpt pallettes is controlled by the "color ramp manager" plugin (see attached ... Giovanni Manghi
01:15 AM Bug report #13530 (Closed): cpt-city ramps missing
it seems to me that the location of the cpt pallettes is controlled by the "color ramp manager" plugin (see attached ... Giovanni Manghi
12:11 PM Bug report #14022: Version check should be user-controlled
Here's the list of reasons correctly formatted for Textile:
* There is no user-facing control for setting this statu...
Shaun Walbridge
12:09 PM Bug report #14022 (Closed): Version check should be user-controlled
In 2.12 and later releases, it looks like on startup, QGIS phones home to check for a newer release and displays this... Shaun Walbridge
12:02 PM Bug report #12361: QGIS crashes whenever using Python console
this seems pretty much a local issue... something new to add to this report?
tried a recent release, 2.8.4 or 2.12.1?
Giovanni Manghi
11:59 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
not sure about Debian, but on Ubuntu I see no issues here. Giovanni Manghi
11:58 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Paolo Cavallini wrote:
> Apparently still valid: the result of st_resample cannot be read.
>
> CREATE TABLE dtm1k
> ...
Giovanni Manghi
11:56 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Paolo Cavallini wrote:
> Now it seems to work, except for -r (out of db) rasters, that crash QGIS
works fine on QGIS...
Giovanni Manghi
11:47 AM Bug report #14021 (Closed): changing a value in the advanced settings editor makes qgis crash
subject says it all, tested on master/osgeo4w. Giovanni Manghi
11:34 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...
Giovanni Manghi wrote:
> it happens only when in the dialog the user does not specify the primary key by enabling the...
Giovanni Manghi
11:34 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...
Giovanni Manghi wrote:
> it happens only when in the dialog the user does not specify the primary key by enabling the...
Giovanni Manghi
09:44 AM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > > If it's about the defaults of the default layer those are only c...
Giovanni Manghi
07:42 AM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
Giovanni Manghi wrote:
> > If it's about the defaults of the default layer those are only considered for primary key ...
Jürgen Fischer
04:30 AM Bug report #13755: Copy/paste PostGIS layer: date not autofill ( ('now'::text)::date)
Jürgen Fischer wrote:
> If it's about the defaults of the default layer those are only considered for primary key co...
Giovanni Manghi
09:29 AM Feature request #4273: North arrow in lower/upper centre canvas
I've been having a look at doing this. I might include Feature request #3756 as well as it's all pretty much the same... Duncan Runnacles
09:25 AM Bug report #13893: Short arcs/curves have wrong center and radius and results big circles to map
Will try the patch in the next days. Marco Hugentobler
04:51 AM Bug report #13893 (Open): Short arcs/curves have wrong center and radius and results big circles ...
Giovanni Manghi
06:01 AM Bug report #13148 (Closed): Netcdf files : computational problem with the gdal tools
without further details and a dataset is impossible to troubleshoot this issue. Feel free to reopen. Giovanni Manghi
06:01 AM Bug report #13148 (Closed): Netcdf files : computational problem with the gdal tools
without further details and a dataset is impossible to troubleshoot this issue. Feel free to reopen. Giovanni Manghi
06:00 AM Bug report #13377 (Closed): Unable to Snap to new features after saving, without reloading data
closing for lack of feedback and because it also works as expected, at least on master. Giovanni Manghi
06:00 AM Bug report #13377 (Closed): Unable to Snap to new features after saving, without reloading data
closing for lack of feedback and because it also works as expected, at least on master. Giovanni Manghi
05:51 AM Bug report #13151: Zonal statistics error: 0-d arrays can't be indexed
tested again on several computers (Windows 7/10, linux) with your data and the latest processing available: no issues. Giovanni Manghi
05:51 AM Bug report #13151: Zonal statistics error: 0-d arrays can't be indexed
tested again on several computers (Windows 7/10, linux) with your data and the latest processing available: no issues. Giovanni Manghi
05:42 AM Bug report #9369: "duplicate layer" takes ages to duplicate spatialite layers
what is the status of this issue? I can't replicate even with large projects. Can a sample project and data be shared... Giovanni Manghi
05:40 AM Bug report #11540 (Open): Cannot load http_digest authenticated WMS
Giovanni Manghi
03:13 AM Bug report #9425 (Open): grass_script.bat always fails if USERNAME contains MBCS
Giovanni Manghi
02:37 AM Bug report #14018: UNable to create Multiple map outputs on one print composer
MIchael O'Grady wrote:
> More of a bug report? But if I'm doing it wrong? I have tried locking the layers to make the...
Giovanni Manghi
02:34 AM Bug report #14018: UNable to create Multiple map outputs on one print composer
More of a bug report? But if I'm doing it wrong? I have tried locking the layers to make them uneditable but it still... MIchael O'Grady
01:19 AM Bug report #14018 (Feedback): UNable to create Multiple map outputs on one print composer
IS this a question or a bug report? cheers! Giovanni Manghi
02:31 AM Bug report #13448 (Open): Qgis DBManager does nothing and does not output nothing in the console ...
Giovanni Manghi
01:34 AM Bug report #10955 (Closed): Error in Windows 64 bit installer
Hi Jürgen,
if is feeeback then the ticket it to be closed, as the reporter has not left any feedback since long ago.
Giovanni Manghi
01:34 AM Bug report #10955 (Closed): Error in Windows 64 bit installer
Hi Jürgen,
if is feeeback then the ticket it to be closed, as the reporter has not left any feedback since long ago.
Giovanni Manghi
01:31 AM Bug report #10955 (Feedback): Error in Windows 64 bit installer
Jürgen Fischer
01:30 AM Bug report #12416: QGIS 2.8.1 crash opening FileGDB (openGDB-Driver)

> I was just looking for an open ticket on this subject. QGIS closes unexpectedly when attempting to open a 124Mb Fi...
Giovanni Manghi
01:25 AM Bug report #14020 (Closed): DB Manager and Browser cannot delete materialized views
DB Manager:... Giovanni Manghi
01:11 AM Bug report #11746: Vertical lines appear as artifacts when map has lots of layers turned on.
Donovan Cameron wrote:
> I'm able to reproduce it easily now =)
>
> I add the Digital Road Atlas (layer that ends in...
Giovanni Manghi

2015-12-20

12:31 AM Bug report #14017 (Closed): Configuring the Topology checker tool makes QGIS master crash
Fixed in changeset commit:"7afa9e31619d6f898c00a4755dd6682c13ebf507". Nyall Dawson
12:06 PM Bug report #14017: Configuring the Topology checker tool makes QGIS master crash
spotted by Anita. Giovanni Manghi
12:05 PM Bug report #14017 (Closed): Configuring the Topology checker tool makes QGIS master crash
subject says it all. Tested on QGIS master/osgeo4w. Giovanni Manghi
11:26 PM Bug report #4375 (Closed): Zoom to layer extent does not work for a point layer with a single point.
Me too. Alister Hood
11:26 PM Bug report #4375 (Closed): Zoom to layer extent does not work for a point layer with a single point.
Me too. Alister Hood
04:42 AM Bug report #4375: Zoom to layer extent does not work for a point layer with a single point.
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> It is not centered on the point but the point is displayed.
I can...
Giovanni Manghi
11:22 PM Bug report #5173: Shape file field precision includes the . when saving, but not when editing in ...
#14019 Alister Hood
10:30 AM Bug report #5173 (Closed): Shape file field precision includes the . when saving, but not when ed...
Alister Hood wrote:
> Yes, it is pretty much fixed.
> There is a problem with a corner case which would perhaps be be...
Giovanni Manghi
10:30 AM Bug report #5173 (Closed): Shape file field precision includes the . when saving, but not when ed...
Alister Hood wrote:
> Yes, it is pretty much fixed.
> There is a problem with a corner case which would perhaps be be...
Giovanni Manghi
11:21 PM Bug report #14019 (Closed): Problems with a field where precision = length
This looks like it is just a corner case remaining after the fix for #5173.
A) QGIS allows me to create a column wit...
Alister Hood
09:36 PM Bug report #14018 (Closed): UNable to create Multiple map outputs on one print composer
I am unable to put multiple map outputs on one print composer, each showing a different selection of attributes from ... MIchael O'Grady
07:37 PM Bug report #13336: Allow raster calculator with huge raster inputs
Can you also send me a link to them? nyall dot dawson at gmail dot com Nyall Dawson
10:44 AM Bug report #13336 (Open): Allow raster calculator with huge raster inputs
Nicolas Cadieux wrote:
> Send me an email to nicolas.cadieux at archeotec.ca if you need files to resolve this issue...
Giovanni Manghi
10:44 AM Bug report #13336 (Open): Allow raster calculator with huge raster inputs
Nicolas Cadieux wrote:
> Send me an email to nicolas.cadieux at archeotec.ca if you need files to resolve this issue...
Giovanni Manghi
05:11 PM Bug report #12416: QGIS 2.8.1 crash opening FileGDB (openGDB-Driver)
Giovanni Manghi wrote:
> I have also tested some very large filegdb dataset linked here
>
> #11746-6
>
> with ...
clifford snow
03:16 AM Bug report #12416: QGIS 2.8.1 crash opening FileGDB (openGDB-Driver)
I have also tested some very large filegdb dataset linked here #11746-6 with no issues whatsoever.
I suggest to cl...
Giovanni Manghi
04:22 PM Bug report #14007: Can't create new features from Postgis Table with Z component
I can confirm this issue. Some information about it with sample data:
http://osgeo-org.1560.x6.nabble.com/Problem-ed...
Pedro Venâncio
04:21 PM Bug report #14006: Can't export layers from Postgis tables with Z component geometries
I can confirm this issue. Some information about it with sample data:
http://osgeo-org.1560.x6.nabble.com/Problem-ed...
Pedro Venâncio
11:06 AM Bug report #3466 (Closed): Extremely Bloated PDF Vector Export under Win.
Giovanni Manghi
10:41 AM Bug report #5744 (Closed): Apply and Cancel buttons don't change language
Giovanni Manghi
10:40 AM Bug report #5780 (Open): Most labels in menus are in Title Case
Giovanni Manghi
10:39 AM Bug report #6230 (Closed): Layer may become unselected after "paste style"
Giovanni Manghi
10:38 AM Bug report #5125 (Closed): Inconsistent behaviour - whether or not newly added layers are automat...
Alister Hood wrote:
> I didn't test adding layers programmatically, but yes, I think it can be closed. Can anyone re...
Giovanni Manghi
10:38 AM Bug report #5125 (Closed): Inconsistent behaviour - whether or not newly added layers are automat...
Alister Hood wrote:
> I didn't test adding layers programmatically, but yes, I think it can be closed. Can anyone re...
Giovanni Manghi
10:28 AM Bug report #6210 (Closed): Choosing the CRS from the "recently used CRS" does nothing (on the fir...
no need to wait to close this one, it has been fixed a long ago. Giovanni Manghi
10:28 AM Bug report #6210 (Closed): Choosing the CRS from the "recently used CRS" does nothing (on the fir...
no need to wait to close this one, it has been fixed a long ago. Giovanni Manghi
10:26 AM Bug report #13963 (Open): QGIS greadily allocates memory and crashes when editing moderately larg...
Karl Kastner wrote:
> There is no dbf, as there are no attributes. This is a Matlab export. Matlab does not create a ...
Giovanni Manghi
10:26 AM Bug report #13963 (Open): QGIS greadily allocates memory and crashes when editing moderately larg...
Karl Kastner wrote:
> There is no dbf, as there are no attributes. This is a Matlab export. Matlab does not create a ...
Giovanni Manghi
10:26 AM Bug report #13963 (Open): QGIS greadily allocates memory and crashes when editing moderately larg...
Karl Kastner wrote:
> There is no dbf, as there are no attributes. This is a Matlab export. Matlab does not create a ...
Giovanni Manghi
10:15 AM Bug report #6468 (Closed): loadNamedStyle does not apply labelfield
closing for lack of feedback. Giovanni Manghi
10:15 AM Bug report #6468 (Closed): loadNamedStyle does not apply labelfield
closing for lack of feedback. Giovanni Manghi
10:15 AM Bug report #12749 (Open): when using custom functions to style a layer, map canvas gives wrong co...
Giovanni Manghi
10:13 AM Bug report #13525 (Closed): QgisRelationEditorWidget in custom form emits duplicate signals
mescal72 - wrote:
> I'm a python newbye so may be the code in the form can be not correct.
so, in this case shouldn...
Giovanni Manghi
10:13 AM Bug report #13525 (Closed): QgisRelationEditorWidget in custom form emits duplicate signals
mescal72 - wrote:
> I'm a python newbye so may be the code in the form can be not correct.
so, in this case shouldn...
Giovanni Manghi
10:08 AM Bug report #13201 (Closed): Snapping options are not working.
Giovanni Manghi
09:53 AM Bug report #13233 (Open): GPS Information - the Connection is not restored
Giovanni Manghi
09:51 AM Bug report #9182 (Closed): Range in Min - Max change
This seems to be solved :-)
Regards
Lene
Lene Fischer
09:51 AM Bug report #9182 (Closed): Range in Min - Max change
This seems to be solved :-)
Regards
Lene
Lene Fischer
09:51 AM Bug report #12702 (Open): Help for all qgis:graphics missing
2.8.4/master still affected. Giovanni Manghi
09:51 AM Bug report #12702 (Open): Help for all qgis:graphics missing
2.8.4/master still affected. Giovanni Manghi
09:45 AM Bug report #11693 (Open): provider.addFeatures() returns True but fails
Giovanni Manghi
09:44 AM Bug report #10636 (Closed): Translation for command description and help in Processing: GRASS and...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:44 AM Bug report #10636 (Closed): Translation for command description and help in Processing: GRASS and...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:43 AM Bug report #9848 (Closed): user models and scripts are not added if --configpath option is used
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:43 AM Bug report #9848 (Closed): user models and scripts are not added if --configpath option is used
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:42 AM Bug report #13357 (Closed): Layers populated with empty diagrams after migrating project from old...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:42 AM Bug report #13357 (Closed): Layers populated with empty diagrams after migrating project from old...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:40 AM Bug report #12923 (Open): Project with SQL Server Layers opens much slower in 2.8 than 2.6
Giovanni Manghi
09:39 AM Bug report #12542 (Open): Processing: better naming structure for output
Giovanni Manghi
09:21 AM Bug report #12701 (Open): QGIS crashes when trying to add ODBC new layer
Giovanni Manghi
09:20 AM Bug report #6226 (Closed): Primary key field hidden on attributes tables addes to qgis
duplicate of #11498 Giovanni Manghi
09:20 AM Bug report #6226 (Closed): Primary key field hidden on attributes tables addes to qgis
duplicate of #11498 Giovanni Manghi
09:19 AM Bug report #11498: spatialite layer added via browser lose first field
see also #6226 Giovanni Manghi
09:10 AM Bug report #11498 (Open): spatialite layer added via browser lose first field
Giovanni Manghi
09:05 AM Bug report #8327 (Open): MSSQL provider overwrites username in table creation
Giovanni Manghi
09:04 AM Bug report #9325 (Closed): Saving as Spatialite saves as SQLite that allows setting width of the ...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:04 AM Bug report #9325 (Closed): Saving as Spatialite saves as SQLite that allows setting width of the ...
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:03 AM Bug report #9851 (Closed): Processing - Toolbox tree view should not collapse when a model is add...
Giovanni Manghi
09:02 AM Bug report #11845 (Open): QGIS startup is slow on windows with --configpath option
Giovanni Manghi
09:01 AM Bug report #13531 (Open): Pythonpath is reverted to old QGIS version on restart
Giovanni Manghi
09:00 AM Bug report #13643 (Closed): After adding Postgis view I can't see records in attribute table
closing for lack of feedback, reopen if necessary. Giovanni Manghi
09:00 AM Bug report #13643 (Closed): After adding Postgis view I can't see records in attribute table
closing for lack of feedback, reopen if necessary. Giovanni Manghi
08:59 AM Bug report #13883 (Open): Scalebar problem in QGis 2.12.0
Giovanni Manghi
08:57 AM Bug report #3996 (Closed): wrong extents in shapefile.
if there was an issue this seems long gone, reopen if necessary. Giovanni Manghi
08:57 AM Bug report #3996 (Closed): wrong extents in shapefile.
if there was an issue this seems long gone, reopen if necessary. Giovanni Manghi
08:52 AM Bug report #13679 (Open): QGIS master crashes when closing DB Manager in preview mode for PostGIS...
Giovanni Manghi
08:25 AM Bug report #3991 (Closed): WFS 1.1 data is not displayed
seems to work ok, tested on master. Giovanni Manghi
08:25 AM Bug report #3991 (Closed): WFS 1.1 data is not displayed
seems to work ok, tested on master. Giovanni Manghi
08:11 AM Bug report #4076 (Closed): Hanging on trying to use --snapshot option from command line
it works also on Windows. Giovanni Manghi
08:11 AM Bug report #4076 (Closed): Hanging on trying to use --snapshot option from command line
it works also on Windows. Giovanni Manghi
08:02 AM Bug report #11395 (Open): QgsAttributeForm not entering edit mode
Giovanni Manghi
08:01 AM Bug report #9706 (Closed): marker symbol not centered
seems ok to me on master, reopen if necessary. Giovanni Manghi
08:01 AM Bug report #9706 (Closed): marker symbol not centered
seems ok to me on master, reopen if necessary. Giovanni Manghi
07:59 AM Bug report #12783 (Open): Import CSV via "add delimited text layer" ignores Date fields in CSVT
Giovanni Manghi
07:49 AM Bug report #12629 (Open): Vector Layer TranslateFeatures performance (2.8.1 vs 1.8.0)
Giovanni Manghi
07:35 AM Bug report #13592: Processing: `r.to.vect` and `v.generalize` fail
Paolo Cavallini wrote:
> Have you tested with the same data? The problem is still present, so it warrants deeper inv...
Giovanni Manghi
04:51 AM Bug report #13592: Processing: `r.to.vect` and `v.generalize` fail
Paolo Cavallini wrote:
> Have you tested with the same data? The problem is still present
anyway if a ticket is in f...
Giovanni Manghi
04:49 AM Bug report #13592 (Feedback): Processing: `r.to.vect` and `v.generalize` fail
Paolo Cavallini wrote:
> Have you tested with the same data?
I had, on both Linux and Windows, with different QGIS a...
Giovanni Manghi
04:49 AM Bug report #13592 (Feedback): Processing: `r.to.vect` and `v.generalize` fail
Paolo Cavallini wrote:
> Have you tested with the same data?
I had, on both Linux and Windows, with different QGIS a...
Giovanni Manghi
05:11 AM Bug report #3518 (Closed): Spatial Query not selecting points in complex polygons
closing for lack of feedback. Giovanni Manghi
05:11 AM Bug report #3518 (Closed): Spatial Query not selecting points in complex polygons
closing for lack of feedback. Giovanni Manghi
04:52 AM Bug report #13857 (Feedback): Default values on a PG table: type cast appended
Giovanni Manghi
04:47 AM Bug report #13857: Default values on a PG table: type cast appended
Paolo Cavallini wrote:
> Giovanni, please don't close valid issues. Thanks.
didn't you stated it was a 'local mistake'?
Giovanni Manghi
04:48 AM Bug report #14014: Plugin SLD4raster. Error message start of operation
giulio monaldi wrote:
> sorry
> I can't find the form to send the report in the section plugins.
> GM
see here
http:...
Giovanni Manghi
04:43 AM Bug report #4238 (Closed): Geoserver WFS-T throws error when using QGIS Cut Spatial Objects tool
closing for lack of feedback. Giovanni Manghi
04:43 AM Bug report #4238 (Closed): Geoserver WFS-T throws error when using QGIS Cut Spatial Objects tool
closing for lack of feedback. Giovanni Manghi
04:35 AM Bug report #12974 (Closed): "Select by location" does not give any warning whe using layers with ...
We are on the path of getting rid of the "vector" menu tools and access them only through the Processing toolobox, wh... Giovanni Manghi
04:35 AM Bug report #12974 (Closed): "Select by location" does not give any warning whe using layers with ...
We are on the path of getting rid of the "vector" menu tools and access them only through the Processing toolobox, wh... Giovanni Manghi
04:35 AM Bug report #12974 (Closed): "Select by location" does not give any warning whe using layers with ...
We are on the path of getting rid of the "vector" menu tools and access them only through the Processing toolobox, wh... Giovanni Manghi
04:32 AM Feature request #4564 (Open): Make ftools tools work with input layers with different CRSs
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> with QGIS 2.13 master, I can use the geoprocessing tools of fTools...
Giovanni Manghi
04:32 AM Feature request #4564 (Open): Make ftools tools work with input layers with different CRSs
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> with QGIS 2.13 master, I can use the geoprocessing tools of fTools...
Giovanni Manghi
04:32 AM Feature request #4564 (Open): Make ftools tools work with input layers with different CRSs
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> with QGIS 2.13 master, I can use the geoprocessing tools of fTools...
Giovanni Manghi
04:28 AM Bug report #13891 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Piotr Kania
04:27 AM Bug report #13954 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Piotr Kania
04:27 AM Bug report #13992 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Piotr Kania
04:27 AM Bug report #14016 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Hi!
Win 7 sp1 x64, qgis x64 rev. 6a973d6
When I change values in "Options/Digitizing/Rubberband/Line color&Fill col...
Piotr Kania
04:25 AM Bug report #13853 (Closed): Error on edit sqlite layer
The linked SL database is not right: the layer is missing the CRS and the primary key. Once properly given the pk and... Giovanni Manghi
04:25 AM Bug report #13853 (Closed): Error on edit sqlite layer
The linked SL database is not right: the layer is missing the CRS and the primary key. Once properly given the pk and... Giovanni Manghi
04:24 AM Bug report #13967 (Closed): gdal_merge crashes python
please file the issue in the osgeo4w bug tracker. Thanks. Giovanni Manghi
04:24 AM Bug report #13967 (Closed): gdal_merge crashes python
please file the issue in the osgeo4w bug tracker. Thanks. Giovanni Manghi
04:23 AM Bug report #13192 (Feedback): Error when saving Matplotlib figure
shouldn't this be filed on the osgeo4w tracker (where the dependencies and python libraries for Windows are packaged)? Giovanni Manghi
03:59 AM Bug report #13969 (Closed): Status WiKi
please raise this question in the users or developers mailing list, thanks. Giovanni Manghi
03:59 AM Bug report #13969 (Closed): Status WiKi
please raise this question in the users or developers mailing list, thanks. Giovanni Manghi
03:58 AM Bug report #13988 (Closed): WCS layer loaded but unable to use it with raster calculator
duplicate of #5857, WCS layers are not supported yet as valid input raster layers. Giovanni Manghi
03:58 AM Bug report #13988 (Closed): WCS layer loaded but unable to use it with raster calculator
duplicate of #5857, WCS layers are not supported yet as valid input raster layers. Giovanni Manghi
03:56 AM Bug report #14010 (Closed): Converting to Offline Editing of WFS-T layer causes minidump
duplicate of #3673 (and not a regression, so not a blocker). Giovanni Manghi
03:56 AM Bug report #14010 (Closed): Converting to Offline Editing of WFS-T layer causes minidump
duplicate of #3673 (and not a regression, so not a blocker). Giovanni Manghi
03:54 AM Bug report #12522 (Closed): Raster layers sometimes not painted when zooming (>=2.4)
duplicate of #13155 Giovanni Manghi
03:54 AM Bug report #12522 (Closed): Raster layers sometimes not painted when zooming (>=2.4)
duplicate of #13155 Giovanni Manghi
03:53 AM Bug report #13155: A Multiband image(e.g. landsat5,7,8) cannot be displayed in windows8.
see also #12522 Giovanni Manghi
03:43 AM Bug report #13155 (Open): A Multiband image(e.g. landsat5,7,8) cannot be displayed in windows8.
I think there is enough feedback to say that the issue is confirmed, at least on some Windows machines. Giovanni Manghi
03:39 AM Feature request #4314 (Open): Apply polygon styles also to points
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> in QGIS 2.13 (and probably in previous versions), you can't apply ...
Giovanni Manghi
03:39 AM Feature request #4314 (Open): Apply polygon styles also to points
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> in QGIS 2.13 (and probably in previous versions), you can't apply ...
Giovanni Manghi
03:39 AM Feature request #4314 (Open): Apply polygon styles also to points
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> in QGIS 2.13 (and probably in previous versions), you can't apply ...
Giovanni Manghi
03:36 AM Bug report #4587 (Closed): 'Zoom to best scale' Generates Bad Bounding Box
just tested on a Mapserver WMS service and it seems ok to me on QGIS ltr. Giovanni Manghi
03:36 AM Bug report #4587 (Closed): 'Zoom to best scale' Generates Bad Bounding Box
just tested on a Mapserver WMS service and it seems ok to me on QGIS ltr. Giovanni Manghi
03:28 AM Bug report #4620 (Closed): Killing QGIS deletes all user settings
closing for lack of feedback and as it seems fixed in recent qgis releases.
I remember to have seen this in the past...
Giovanni Manghi
03:28 AM Bug report #4620 (Closed): Killing QGIS deletes all user settings
closing for lack of feedback and as it seems fixed in recent qgis releases.
I remember to have seen this in the past...
Giovanni Manghi
03:25 AM Bug report #4473 (Closed): Form annotations broken in master and 1.7.1
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:25 AM Bug report #4473 (Closed): Form annotations broken in master and 1.7.1
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:24 AM Bug report #4525 (Closed): Composer map rotation / items
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:24 AM Bug report #4525 (Closed): Composer map rotation / items
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:23 AM Bug report #4555 (Closed): Rendering of symbols when exporting to pdf
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:23 AM Bug report #4555 (Closed): Rendering of symbols when exporting to pdf
closing for lack of feedback and as it seems fixed in recent qgis releases. Giovanni Manghi
03:22 AM Feature request #4542 (Open): ColorBrewer color ramps: better GUI organization
Giovanni Manghi
03:14 AM Bug report #10876 (Closed): Broken non-latin text attributes when doing Shapefile import in GRASS...
closing this because anyway there is no evidence that importing the same vector with native GRASS you get a better re... Giovanni Manghi
03:14 AM Bug report #10876 (Closed): Broken non-latin text attributes when doing Shapefile import in GRASS...
closing this because anyway there is no evidence that importing the same vector with native GRASS you get a better re... Giovanni Manghi

2015-12-19

04:17 PM Bug report #10955 (Open): Error in Windows 64 bit installer
Giovanni Manghi
04:14 PM Bug report #7935 (Closed): SVG paths still absolute if project set to use relative paths
closing for lack of feedback. Giovanni Manghi
04:14 PM Bug report #7935 (Closed): SVG paths still absolute if project set to use relative paths
closing for lack of feedback. Giovanni Manghi
04:11 PM Bug report #3115 (Closed): Old project layer got lost after installing plug ins and updating
closing for lack of feedback. Giovanni Manghi
04:11 PM Bug report #3115 (Closed): Old project layer got lost after installing plug ins and updating
closing for lack of feedback. Giovanni Manghi
04:06 PM Bug report #13198 (Closed): Unable to delete features of a table inside a public schema of postgr...
closing for lack of feedback. Giovanni Manghi
04:06 PM Bug report #13198 (Closed): Unable to delete features of a table inside a public schema of postgr...
closing for lack of feedback. Giovanni Manghi
02:54 PM Bug report #13144: Style Categorized not working with PostGis database
baditaflorin - wrote:
> I think the problem it`s because i am using a view to see the 2.800.000
so you are trying to...
Giovanni Manghi
02:45 PM Feature request #3697 (Open): Add option "Zoom to full extent including invisible layers"
Giovanni Manghi
02:45 PM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Jukka Rahkonen wrote:
> I would say this is not a bug because changing the behaviour would make some other users unha...
Giovanni Manghi
02:45 PM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Jukka Rahkonen wrote:
> I would say this is not a bug because changing the behaviour would make some other users unha...
Giovanni Manghi
02:45 PM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Jukka Rahkonen wrote:
> I would say this is not a bug because changing the behaviour would make some other users unha...
Giovanni Manghi
02:37 PM Bug report #12295 (Open): Edit tools act on hidden features
Giovanni Manghi
02:36 PM Bug report #12956 (Closed): DB Manager: copying a table from a PostGIS schema into another fails
Paul Kanelli wrote:
> In QGIS 2.12 the sequences of serial columns don't get lost when copying a table from a schema ...
Giovanni Manghi
02:36 PM Bug report #12956 (Closed): DB Manager: copying a table from a PostGIS schema into another fails
Paul Kanelli wrote:
> In QGIS 2.12 the sequences of serial columns don't get lost when copying a table from a schema ...
Giovanni Manghi
02:31 PM Bug report #13143 (Closed): Print Composer won't export PDF
duplicate of #13399 Giovanni Manghi
02:31 PM Bug report #13143 (Closed): Print Composer won't export PDF
duplicate of #13399 Giovanni Manghi
02:30 PM Bug report #13454 (Closed): 2.11 Authentification System error
closing for lack of feedback. Giovanni Manghi
02:30 PM Bug report #13454 (Closed): 2.11 Authentification System error
closing for lack of feedback. Giovanni Manghi
02:29 PM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument
Nicolas Rochard wrote:
> Create Geometry Table : http://paste.opensuse.org/93583864
> Create Attribute Table : http:/...
Giovanni Manghi
02:27 PM Bug report #13679: QGIS master crashes when closing DB Manager in preview mode for PostGIS layers...
Giovanni Manghi wrote:
> salvatore fiandaca wrote:
> > I installed QGIS 2.12 in another machine (6 GB RAM, 64-bit, Wi...
salvatore fiandaca
02:01 PM Bug report #13679: QGIS master crashes when closing DB Manager in preview mode for PostGIS layers...
Steven Mizuno wrote:
> It occurred to me that preventing the mapcanvas from rendering might help.
> have found that i...
Giovanni Manghi
02:00 PM Bug report #13679: QGIS master crashes when closing DB Manager in preview mode for PostGIS layers...
salvatore fiandaca wrote:
> I installed QGIS 2.12 in another machine (6 GB RAM, 64-bit, Win 10, like mine), the mini-...
Giovanni Manghi
02:26 PM Bug report #13394 (Closed): Saving to remote drives
the suggested solution seems ok. Closing for lack of feedback. Giovanni Manghi
02:26 PM Bug report #13394 (Closed): Saving to remote drives
the suggested solution seems ok. Closing for lack of feedback. Giovanni Manghi
02:22 PM Bug report #13473 (Closed): oracle show 0 when asked for 'show feature count' in layer list
closing for lack of feedback. Giovanni Manghi
02:22 PM Bug report #13473 (Closed): oracle show 0 when asked for 'show feature count' in layer list
closing for lack of feedback. Giovanni Manghi
02:20 PM Bug report #12874 (Open): [Composer] DEL button doesn't remove items from the print composer on M...
Giovanni Manghi
02:19 PM Bug report #8285: Saving styles (qml and sld) doesn't work for CSV layers under Windows
see also #12859 Giovanni Manghi
02:19 PM Bug report #12859 (Closed): Qgis layer style file not saving
duplicate of #8285 Giovanni Manghi
02:19 PM Bug report #12859 (Closed): Qgis layer style file not saving
duplicate of #8285 Giovanni Manghi
02:11 PM Bug report #12774: Attribute table only show first 99 rows from SQL Server views
closing for lack of feedback. Giovanni Manghi
02:10 PM Bug report #12236 (Closed): Snapping options
closing for lack of feedback. Giovanni Manghi
02:10 PM Bug report #12236 (Closed): Snapping options
closing for lack of feedback. Giovanni Manghi
02:10 PM Bug report #12118 (Open): Advanced digitizing toolbar not shown on first install
Giovanni Manghi
02:06 PM Bug report #3673 (Open): Offline edit: do not allow select not PostGIS/WFS-T layers
Giovanni Manghi
01:54 PM Bug report #13614 (Open): Erroneous gaps in the histogram when column type is integer
Giovanni Manghi
01:52 PM Bug report #13395: Load style from database
just tested on 2.12 on Win7 and QGIS master, and it works as expected. Giovanni Manghi
01:50 PM Bug report #14015 (Closed): Saving categorized style into Postgresql causes crash on QGIS master
subject says it all. Works fine up to 2.12 Giovanni Manghi
12:40 PM Bug report #4104 (Closed): error ' attribute value change(s) not applied' when editing csv files
Giovanni Manghi
12:38 PM Bug report #13408 (Closed): Graphical Modeler Raster layer Input does not recognize GRASS raster ...
see #7727
(on Windows and Linux GRASS raster layers are not yet shown as available inputs, when it will then is expe...
Giovanni Manghi
12:38 PM Bug report #13408 (Closed): Graphical Modeler Raster layer Input does not recognize GRASS raster ...
see #7727
(on Windows and Linux GRASS raster layers are not yet shown as available inputs, when it will then is expe...
Giovanni Manghi
12:10 PM Bug report #6299 (Closed): Sextante output do not have the same Encoding as the inputs
it seems to me that this is now fixed (at least in master), please reopen of necessary. Giovanni Manghi
12:10 PM Bug report #6299 (Closed): Sextante output do not have the same Encoding as the inputs
it seems to me that this is now fixed (at least in master), please reopen of necessary. Giovanni Manghi
11:29 AM Bug report #13592 (Reopened): Processing: `r.to.vect` and `v.generalize` fail
Have you tested with the same data? The problem is still present, so it warrants deeper investigation. I'll test with... Paolo Cavallini
10:06 AM Bug report #13592 (Closed): Processing: `r.to.vect` and `v.generalize` fail
closing for lack of feedback. Giovanni Manghi
10:06 AM Bug report #13592 (Closed): Processing: `r.to.vect` and `v.generalize` fail
closing for lack of feedback. Giovanni Manghi
11:26 AM Bug report #13857 (Reopened): Default values on a PG table: type cast appended
Giovanni, please don't close valid issues. Thanks. Paolo Cavallini
10:55 AM Bug report #13857 (Closed): Default values on a PG table: type cast appended
Giovanni Manghi
11:12 AM Bug report #13691 (Closed): Zoom level affects display of the layer
closing for lack of feedback. Giovanni Manghi
11:12 AM Bug report #13691 (Closed): Zoom level affects display of the layer
closing for lack of feedback. Giovanni Manghi
11:12 AM Bug report #13699 (Closed): Spatialite database file remains locked after layers removed.
closing for lack of feedback. Giovanni Manghi
11:12 AM Bug report #13699 (Closed): Spatialite database file remains locked after layers removed.
closing for lack of feedback. Giovanni Manghi
11:11 AM Bug report #13794 (Closed): Memory behaving strangely
closing for lack of feedback. Giovanni Manghi
11:11 AM Bug report #13794 (Closed): Memory behaving strangely
closing for lack of feedback. Giovanni Manghi
11:10 AM Bug report #13706 (Closed): Not working grass plugin in QGis Lyon for osx - file browser-
closing for lack of feedback. Giovanni Manghi
11:10 AM Bug report #13706 (Closed): Not working grass plugin in QGis Lyon for osx - file browser-
closing for lack of feedback. Giovanni Manghi
11:10 AM Bug report #13721 (Closed): Connection Issues with 2.12 and SQL Server 2014
closing for lack of feedback. Giovanni Manghi
11:10 AM Bug report #13721 (Closed): Connection Issues with 2.12 and SQL Server 2014
closing for lack of feedback. Giovanni Manghi
11:08 AM Bug report #13910 (Closed): Inactive action tool
closing for lack of feedback. Giovanni Manghi
11:08 AM Bug report #13910 (Closed): Inactive action tool
closing for lack of feedback. Giovanni Manghi
11:07 AM Bug report #13195 (Closed): Georeferencer freezes on second map processing
closing for lack of feedback. Giovanni Manghi
11:07 AM Bug report #13195 (Closed): Georeferencer freezes on second map processing
closing for lack of feedback. Giovanni Manghi
11:05 AM Bug report #3826 (Closed): Using 100% CPU when connected to GPS
closing for lack of feedback. Giovanni Manghi
11:05 AM Bug report #3826 (Closed): Using 100% CPU when connected to GPS
closing for lack of feedback. Giovanni Manghi
10:50 AM Bug report #3487 (Closed): Select features by rectangle does not work properly
closing for lack of feedback. Giovanni Manghi
10:50 AM Bug report #3487 (Closed): Select features by rectangle does not work properly
closing for lack of feedback. Giovanni Manghi
10:50 AM Bug report #13133 (Closed): Crash On Vector Analysis of Large Dataset
closing for lack of feedback. Giovanni Manghi
10:50 AM Bug report #13133 (Closed): Crash On Vector Analysis of Large Dataset
closing for lack of feedback. Giovanni Manghi
10:49 AM Bug report #13793 (Closed): Red semitransparent background visible when I use Node tool
it was merged 4 days ago. Giovanni Manghi
10:49 AM Bug report #13793 (Closed): Red semitransparent background visible when I use Node tool
it was merged 4 days ago. Giovanni Manghi
10:48 AM Bug report #13718 (Closed): "Add saved file to map" doesn't work if there are some errors during ...
Giovanni Manghi
10:46 AM Bug report #4156 (Closed): PDF generated using new symbology looks different on screen and on paper
closing for lack of feedback. Giovanni Manghi
10:46 AM Bug report #4156 (Closed): PDF generated using new symbology looks different on screen and on paper
closing for lack of feedback. Giovanni Manghi
10:45 AM Bug report #13882 (Closed): LAStools crashes in windows 10
Sandor Murain wrote:
> LAStools are crashing, I have tried outside QGIS and they give me the same problem.
> Thank yo...
Giovanni Manghi
10:45 AM Bug report #13882 (Closed): LAStools crashes in windows 10
Sandor Murain wrote:
> LAStools are crashing, I have tried outside QGIS and they give me the same problem.
> Thank yo...
Giovanni Manghi
10:44 AM Bug report #13729 (Closed): Formatting and rounding errors in world files (tfw) exported by Map C...
closing for lack of feedback. Giovanni Manghi
10:44 AM Bug report #13729 (Closed): Formatting and rounding errors in world files (tfw) exported by Map C...
closing for lack of feedback. Giovanni Manghi
10:42 AM Bug report #13799 (Closed): 'Merge' algorithm can't recognize GeoTiff layers
closing for lack of feedback. Giovanni Manghi
10:42 AM Bug report #13799 (Closed): 'Merge' algorithm can't recognize GeoTiff layers
closing for lack of feedback. Giovanni Manghi
10:42 AM Bug report #13758 (Closed): Attribute Table, Clipboard
closing for lack of feedback. Giovanni Manghi
10:42 AM Bug report #13758 (Closed): Attribute Table, Clipboard
closing for lack of feedback. Giovanni Manghi
10:41 AM Bug report #13648 (Closed): After saving postgis layer edition unnecessary log message appears
closing for lack of feedback. Giovanni Manghi
10:41 AM Bug report #13648 (Closed): After saving postgis layer edition unnecessary log message appears
closing for lack of feedback. Giovanni Manghi
10:40 AM Bug report #13627 (Closed): relative paths broken in 2.8.3
closing for lack of feedback. Giovanni Manghi
10:40 AM Bug report #13627 (Closed): relative paths broken in 2.8.3
closing for lack of feedback. Giovanni Manghi
10:38 AM Bug report #13261 (Closed): Composer: items cannot be longer moved/resized/selected/unselected......
closing for lack of feedback. Giovanni Manghi
10:38 AM Bug report #13261 (Closed): Composer: items cannot be longer moved/resized/selected/unselected......
closing for lack of feedback. Giovanni Manghi
10:33 AM Bug report #11625 (Closed): Georeferencer wrong tool highlighted
closing for lack of feedback. Giovanni Manghi
10:33 AM Bug report #11625 (Closed): Georeferencer wrong tool highlighted
closing for lack of feedback. Giovanni Manghi
10:33 AM Bug report #11354 (Closed): Labels: special font styles disappears after SVG export
closing for lack of feedback. Giovanni Manghi
10:33 AM Bug report #11354 (Closed): Labels: special font styles disappears after SVG export
closing for lack of feedback. Giovanni Manghi
10:32 AM Bug report #14014: Plugin SLD4raster. Error message start of operation
sorry
I can't find the form to send the report in the section plugins.
GM
giulio monaldi
09:54 AM Bug report #14014 (Closed): Plugin SLD4raster. Error message start of operation
please file the ticket in the plugins bug tracker. Thanks! Giovanni Manghi
09:54 AM Bug report #14014 (Closed): Plugin SLD4raster. Error message start of operation
please file the ticket in the plugins bug tracker. Thanks! Giovanni Manghi
09:11 AM Bug report #14014 (Closed): Plugin SLD4raster. Error message start of operation
The anomaly occurs with the new version qgis 2.12.1-Lyon
giulio monaldi
10:31 AM Bug report #11717 (Closed): symbology/layers wrong order
closing for lack of feedback. Giovanni Manghi
10:31 AM Bug report #11717 (Closed): symbology/layers wrong order
closing for lack of feedback. Giovanni Manghi
10:31 AM Bug report #13618 (Closed): Defining output name (without path) in Processing causes tools to fail
closing for lack of feedback. Giovanni Manghi
10:31 AM Bug report #13618 (Closed): Defining output name (without path) in Processing causes tools to fail
closing for lack of feedback. Giovanni Manghi
10:30 AM Bug report #12813 (Closed): Node tool on PostGIS table with null geometry causes crash
closing for lack of feedback. Giovanni Manghi
10:30 AM Bug report #12813 (Closed): Node tool on PostGIS table with null geometry causes crash
closing for lack of feedback. Giovanni Manghi
10:12 AM Bug report #13818 (Closed): Selecting multiple files in SAGA/Processing uses wrong separator
closing for lack of feedback. Giovanni Manghi
10:12 AM Bug report #13818 (Closed): Selecting multiple files in SAGA/Processing uses wrong separator
closing for lack of feedback. Giovanni Manghi
10:11 AM Bug report #13184 (Closed): Labelling of hidden shapes when sub-categorization is used.
closing for lack of feedback. Giovanni Manghi
10:11 AM Bug report #13184 (Closed): Labelling of hidden shapes when sub-categorization is used.
closing for lack of feedback. Giovanni Manghi
10:09 AM Bug report #12371 (Closed): projection problems
closing for lack of feedback. Giovanni Manghi
10:09 AM Bug report #12371 (Closed): projection problems
closing for lack of feedback. Giovanni Manghi
10:09 AM Bug report #13675 (Closed): Crashes when I try to move the features of memory layer that is rende...
closing for lack of feedback. Giovanni Manghi
10:09 AM Bug report #13675 (Closed): Crashes when I try to move the features of memory layer that is rende...
closing for lack of feedback. Giovanni Manghi
10:08 AM Bug report #12793 (Closed): Minidump when adding a layer (vector, raster, etc.)
closing for lack of feedback. Giovanni Manghi
10:08 AM Bug report #12793 (Closed): Minidump when adding a layer (vector, raster, etc.)
closing for lack of feedback. Giovanni Manghi
10:06 AM Bug report #13724 (Closed): QGIS 2.12 won't open on OS X El Capitán
closing for lack of feedback. Giovanni Manghi
10:06 AM Bug report #13724 (Closed): QGIS 2.12 won't open on OS X El Capitán
closing for lack of feedback. Giovanni Manghi
10:05 AM Bug report #13753 (Closed): Data defined label rotation in Radians, not Degrees
closing for lack of feedback. Giovanni Manghi
10:05 AM Bug report #13753 (Closed): Data defined label rotation in Radians, not Degrees
closing for lack of feedback. Giovanni Manghi
09:57 AM Bug report #14009: ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
cannot confirm here... Giovanni Manghi
06:14 AM Bug report #14009: ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
Jürgen Fischer wrote:
> platform?
Windows 7 Enterprise
Joshua Picotte
03:07 AM Bug report #14009 (Feedback): ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
Jürgen Fischer
03:06 AM Bug report #14009: ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
platform? Jürgen Fischer

2015-12-18

10:25 PM Bug report #14013 (Open): DB Manager: commit on versioned layers fails
Currently the commit to the DB fails for versioned layers, because the original ID (which is not NULLable) is not fil... Paolo Cavallini
10:21 PM Feature request #14012 (Closed): DB Manager: add an option to store $user to Versioning
It would be good to add to the Versioning command an option to automatically store the user who did the editing. It s... Paolo Cavallini
03:01 PM Bug report #13941: Debian build failure.
fyi: binutils now updated in Debian Testing, and QGIS is building again \\o/ Richard Duivenvoorde
01:48 PM Feature request #14011 (Open): Access QGIS measurement (and all QWidgetAction) widget with a dete...
To access the measurement widget in the toolbar that contains "Measure Line", "Measure Area" and "Measure Angle", I h... Thomas Gratier
12:48 PM Bug report #14010: Converting to Offline Editing of WFS-T layer causes minidump
Also occurs on Fedora 20.3 QGIS v2.10. Drew Nix
12:43 PM Bug report #14010 (Closed): Converting to Offline Editing of WFS-T layer causes minidump
Converting to Offline Editing of WFS-T layer causes minidump
Steps to reproduce:
Add a WFS-T Layer
Convert layer off...
Drew Nix
11:34 AM Bug report #14009 (Closed): ogr2ogr not compiled with postgres drivers in QGIS v. 2.12
ogr2ogr that comes packaged with QGIS v. 2.12 does not appear to come distributed with the postgres drivers. Is this... Joshua Picotte
11:16 AM Bug report #13336: Allow raster calculator with huge raster inputs
Hi,
I just saw the comments. Sorry for not responding. I though I would get an email. I could share a file but it'...
Nicolas Cadieux
09:50 AM Bug report #14008: Crash zooming to wide extent
Master branch (commit:efaae1f, to become 2.14) is not affected. Sandro Santilli
09:49 AM Bug report #14008: Crash zooming to wide extent
Re-writing the input WKT as the redmine formatting eat part of it:... Sandro Santilli
09:29 AM Bug report #14008 (Closed): Crash zooming to wide extent
Easy to reproduce with QuickWKT plugin (but it was spotted while trying to load a wide extent layer from PostGIS so t... Sandro Santilli
07:15 AM Bug report #14007 (Closed): Can't create new features from Postgis Table with Z component
In QGIS 2.12, having a Postgis table with Z component. It's not possible to add a new features, as it fails to save. ... Alexandre Neto
06:55 AM Bug report #14006 (Closed): Can't export layers from Postgis tables with Z component geometries
In QGIS 2.12, having a layer from a Postgis table with Z component geometries, it's not possible to save as/export th... Alexandre Neto
03:22 AM Bug report #13037 (Closed): WFS GetCapabilities respons misses <keywords> key
Fixed in changeset commit:"e2d1320295fa16fc40f2787531bd5d2cbda2bd29". René-Luc ReLuc
02:33 AM Bug report #14005 (Closed): composer: qgis freezes when pasting a map legend item
Since 2.12, pasting a map legend item onto a new composer window freezes QGIS, and the only way to get it unfreezed i... Mathieu Pellerin - nIRV
01:25 AM Bug report #14004 (Closed): Night Mapping Theme - Small refinements
1. Colours are not shown while classifying value classes in a raster (see img_1)
2. HTML box in the print composer i...
Niccolo' Marchi

2015-12-17

12:27 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
I first notice this on master, re-tested now on latest master 4511cc474e5b7 and it still segfaults. Alessandro Pasotti
11:59 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
In that case it's related to geoemtry modifiers. Have you tested with current master? There's been a number of relate... Nyall Dawson
09:09 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
I've done dozens of clean builds going back and I tracked it down to:
Last working commit: 29a3c64
First segfaulting ...
Alessandro Pasotti
03:01 PM Bug report #10756 (Reopened): Minidump on closing QGIS 2.4
RE: LecoS - Landscape Ecology Statistics removal fixing program crashing on exit.
I have never used LecoS Plugin and ...
mr warw
06:30 AM Bug report #13037: WFS GetCapabilities respons misses <keywords> key
When fixed, please backport it also to 2.8 LTS. Thanks. Ivan Mincik
01:42 AM Feature request #1528 (Closed): Add Image Map plugin functionality to Print Composer
Hello, bug triage...
I am closing this feature request because of lack of feedback and because it should be done on ...
Médéric RIBREUX
01:42 AM Feature request #1528 (Closed): Add Image Map plugin functionality to Print Composer
Hello, bug triage...
I am closing this feature request because of lack of feedback and because it should be done on ...
Médéric RIBREUX
01:32 AM Feature request #3691 (Open): Drag & drop of layers between qgis instances
Médéric RIBREUX
01:28 AM Feature request #2606 (Open): target field shall be selected automatically
Médéric RIBREUX
01:28 AM Feature request #2659 (Closed): Saving multilayer vector datasets as several shapefiles
Hello, bug triage...
I am closing this feature request because there is no feedback after one month and because QGIS...
Médéric RIBREUX
01:28 AM Feature request #2659 (Closed): Saving multilayer vector datasets as several shapefiles
Hello, bug triage...
I am closing this feature request because there is no feedback after one month and because QGIS...
Médéric RIBREUX

2015-12-16

12:57 AM Bug report #5704 (Closed): Issues with rule based rendering and copy and paste style / qml files
Hello, bug triage...
well, as there is no feedback and based on the fact that I cannot reproduce it, I declare that ...
Médéric RIBREUX
12:57 AM Bug report #5704 (Closed): Issues with rule based rendering and copy and paste style / qml files
Hello, bug triage...
well, as there is no feedback and based on the fact that I cannot reproduce it, I declare that ...
Médéric RIBREUX
12:55 AM Feature request #971 (Open): Make available map extents available as a window that accepts cursor...
Médéric RIBREUX
12:54 AM Feature request #787 (Open): Georeferencer: Add the possibility to reproject reference points
Médéric RIBREUX
05:56 PM Bug report #13686: [compile] qgis master fails with "error: ‘PyUnicode_AsUTF8’ was not declared i...
Yea, and these are some of the cmake options.
@ -DPYTHON_EXECUTABLE=/usr/bin/python2 \\
-DPYTHON_LIBRARY=/usr...
Donovan Cameron
03:57 PM Bug report #13686: [compile] qgis master fails with "error: ‘PyUnicode_AsUTF8’ was not declared i...
Donovan Cameron wrote:
> On Arch Linux, python version is currently at: python3 (3.5.1), python2 (2.7.11)
And you're...
Jürgen Fischer
02:55 PM Bug report #13686: [compile] qgis master fails with "error: ‘PyUnicode_AsUTF8’ was not declared i...
On Arch Linux, python version is currently at: python3 (3.5.1), python2 (2.7.11) Donovan Cameron
05:38 PM Bug report #14002 (Closed): regression: attribute table opens to form view
Since a few weeks now, the attribute table opens to form view instead of the default table view. I'm pretty sure it's... Mathieu Pellerin - nIRV
01:45 PM Bug report #13987: Identify Feature not finding feature
I have identified one difference
Point data from a Table in Postgresql, imported via DB Manager - Identify feature d...
Harry Clarke
11:05 AM Bug report #14001: Crash in QGIS Server running without project in CGI mode
How recently are we talking here? Any chance you could bisect to the offending commit? Nyall Dawson
10:00 AM Bug report #14001 (Closed): Crash in QGIS Server running without project in CGI mode
Recently I've started to see segfaults when qgis server is running in CGI mode.
I couldn't find the source of the pr...
Alessandro Pasotti
06:14 AM Feature request #14000 (Open): Altas option: hidden coverage layer > show current feature
*Use case:* A layer contains a set of objects representing alternate configurations for the same feature. (size, scal... Matt Sim
05:17 AM Bug report #13999 (Closed): "Show feature count" on a rule based gives wrong result for the "ELSE...
If we set a rule based with an "ELSE" statement, the feature count is wrong. It shows the total number of features in... Etienne Trimaille
03:49 AM Bug report #13998 (Closed): QGIS is not rotating the Pixels when showing a rotated tif
When loading a rotated geo-tif (rotation-parameters in tfw-file set) the image is rotated but the image-pixels themse... Peter Drexel

2015-12-15

11:30 PM Bug report #13997 (Closed): Unintended datum shift to WGS84 in map canvas
I'm a new QGIS user running 2.12 Lyon. I've encountered an issue with map canvas units and an unexpected and transpar... Charles Clancy
05:54 PM Bug report #6131 (Closed): New layer creation file browser doesn't resolve aliases in MacOS
Bonjour Médéric,
I'm closing the ticket. I confirm aliases are now properly handled with latest QGIS. Thanks -- Alex...
Alexandre Leroux
05:54 PM Bug report #6131 (Closed): New layer creation file browser doesn't resolve aliases in MacOS
Bonjour Médéric,
I'm closing the ticket. I confirm aliases are now properly handled with latest QGIS. Thanks -- Alex...
Alexandre Leroux
03:59 PM Bug report #8285: Saving styles (qml and sld) doesn't work for CSV layers under Windows
Still open with Windows7 pro 64bits, v2.12.1-Lyon commit:16760fd
Quite annoying especially now that we have nice soph...
Laurence Bechet
02:39 PM Bug report #13996 (Closed): Spatialite views can only loaded as tables in DB Manager, Browser pa...
DB Manager recognize spatial views not as layers. The browser-panel load the views correct as layer.
jpg is attached.
Gerhard Spieles
02:23 PM Bug report #13995 (Closed): singleband pseudocolor discrete rendered wrong
I'm trying to display discrete colors for ranges of values, but it's using values below what's set for a range. The ... William Kyngesburye
02:17 PM Bug report #13994 (Closed): QGIS /forget/ignore settings, for coloropacity in options/canvaslegen...
When you set the color opacity e.g. 50% for selected features, QGIS woks fine. You can save this in options/canvasleg... Gerhard Spieles
08:56 AM Bug report #2856 (Closed): Grass toolbox filter input isn't labelled
The filter is now labeled (2.12). Radim Blazek
08:46 AM Bug report #4975 (Closed): GRASS modules present twice
Fixed in changeset commit:"b57ff40c8b74e05aa08ea0da4031e8baa2e5d2a5". Radim Blazek
08:29 AM Bug report #5084 (Closed): Blank tab on Grass Tool Module
Fixed in changeset commit:"99721527b2dceff90d360dd985b6bfb437b65e21". Radim Blazek
08:19 AM Bug report #13991 (Closed): QGIS Server WFS GetFeature returns wrong content-length header
Fixed in changeset commit:"a37ca2b52fec4752c6345760cbe0e3c62861c2ce". René-Luc ReLuc
05:32 AM Bug report #13991: QGIS Server WFS GetFeature returns wrong content-length header
Pull request https://github.com/qgis/QGIS/pull/2582 fixes the problem. https://github.com/qgis/QGIS/pull/2583 tests it.
asgerpetersen -
05:15 AM Bug report #13991 (Closed): QGIS Server WFS GetFeature returns wrong content-length header
GetFeature returns a content-length header which does not include the length of the content returned after the '<wfs:... asgerpetersen -
08:04 AM Bug report #2578 (Closed): GUI for several GRASS modules wrong
Radim Blazek
08:03 AM Bug report #2578: GUI for several GRASS modules wrong
Multiple map input is supported since 2.12. Radim Blazek
07:58 AM Bug report #3341 (Closed): GRASS MASK only vizualized for PERMANENT
Rasters are masked in GRASS library until G_suppress_masking()/Rast_suppress_masking() is called. Rasters are masked ... Radim Blazek
07:43 AM Bug report #13182: QGIS WFS Server returns empty answer
I think this issue may be related to #13991
The response may look empty because the server sets a wrong content-leng...
asgerpetersen -
05:57 AM Bug report #13830 (Closed): Invalid scripts from models with advancedpythonfieldcalculator
Fixed in changeset commit:"95b92c79608afda0709dcdf8e89ee40b81a51ec7". Victor Olaya
05:32 AM Bug report #13993 (Closed): eVis plugin and UTF8
Hello,
I'm using plugin eVis on QGIS 2.12.1, os win 10. If I make database conections to MS Access or MS SQL and then...
Andrej Trdin
05:26 AM Bug report #13992 (Closed): Changes in "Options/Digitizing/Rubberband/Line color" doesn't change ...
Hi!
Win 7 sp1 x64, qgis x64 rev. 576875e
When I change values in "Options/Digitizing/Rubberband/Line color/" it doe...
Piotr Kania
05:04 AM Bug report #9585 (Closed): Show features count doesn't kept after opening project
Yes, it seems it's fixed now :) Rémi Bovard
03:23 AM Bug report #13232 (Closed): Use estimated data in PG connection doesn't work
This is not a bug in QGIS but in POstGIS, hopefully fixed upstream:
https://github.com/postgis/postgis/commit/92865a...
Alessandro Pasotti
03:11 AM Bug report #13990 (Closed): generated set of rules for postgis layer with joint attributes is not...
I have a layer stored in a postgis database. I can render it in Qgis.
I joined a set of attributes from an xls file t...
philippe Clastre
03:00 AM Feature request #13989: Install / Build / Setup
If you install from OSGeo4W you have more choices. Jürgen Fischer
02:53 AM Feature request #13989 (Open): Install / Build / Setup
Installing QGIS (under Windows OS) is very very time-consuming because of the huge amount of small files to be unpack... Dietmar Berthold
02:23 AM Bug report #13988 (Closed): WCS layer loaded but unable to use it with raster calculator
When i load a WCS raster layer from a geoserver, this layer is rendered in qgis.
But if i want to query this layer wi...
philippe Clastre
01:50 AM Bug report #13987 (Closed): Identify Feature not finding feature
Using Point data from a Postgresql table, Identify Feature reports "No feature at this position found", despite the c... Harry Clarke

2015-12-14

08:40 PM Feature request #7681 (Closed): double left click on CRS Selector window's list items should beha...
Fixed commit:34ccc34 Mathieu Pellerin - nIRV
08:40 PM Feature request #7681 (Closed): double left click on CRS Selector window's list items should beha...
Fixed commit:34ccc34 Mathieu Pellerin - nIRV
08:40 PM Feature request #7681 (Closed): double left click on CRS Selector window's list items should beha...
Fixed commit:34ccc34 Mathieu Pellerin - nIRV
02:49 PM Bug report #13981 (Closed): Error while updating QGIS
Fixed in changeset commit:"002e2335e4cd9f1f4d69ffa3cef1a9145f6b12e1". Jürgen Fischer
01:15 PM Feature request #12273 (Closed): Insert PointOnSurface function in Expression
Implemented in 2.14 Nyall Dawson
01:15 PM Feature request #12273 (Closed): Insert PointOnSurface function in Expression
Implemented in 2.14 Nyall Dawson
01:12 PM Feature request #6269 (Closed): Better tokens for text replacement in Print Composer labels
Nyall Dawson
09:21 AM Bug report #13986 (Closed): Server segfaults when requesting certain GetLegendGraphics without bbox
QGIS server segfaults (500 Internal Server Error) with a specific layer style and the GetLegendGraphics request does ... Tom Palan
05:06 AM Bug report #13985 (Closed): Merge Vector Layer: Attribute values are wrongly assigning if that at...
Merge Vector Layer: The attributes which are not exists in one of the input vector layer are assigning ‘10’ after mer... Nag R
04:59 AM Bug report #13984 (Closed): custom python init function config is lost in master
Fixed in changeset commit:"ca5707ddeba8773aa5a91608b1d317a44f3f9bd1". Anonymous
04:48 AM Bug report #13984 (In Progress): custom python init function config is lost in master
Alessandro Pasotti
04:30 AM Bug report #13984: custom python init function config is lost in master
I asked for a sample project because I tested the import of an old project with init function in the "dotted" form "m... Alessandro Pasotti
04:25 AM Bug report #13984 (Closed): custom python init function config is lost in master
Opening a 2.12 project with current master
If a layer has a custom init function using an external python file
Master...
Denis Rouzaud

2015-12-13

11:08 PM Bug report #5173: Shape file field precision includes the . when saving, but not when editing in ...
Yes, it is pretty much fixed.
There is a problem with a corner case which would perhaps be best filed as a new issue:...
Alister Hood
11:01 PM Bug report #6283 (Closed): no reversion of direction when digitizing polygons counter clockwise i...
Hi,
maybe I was under the impression that the shape-file standard is a general standard. Thanks for pointing this out...
Bernhard Ströbl
07:17 AM Bug report #6283 (Feedback): no reversion of direction when digitizing polygons counter clockwise...
Hello, bug triage...
here is what the "Shapefile standard":http://www.esri.com/library/whitepapers/pdfs/shapefile.pd...
Médéric RIBREUX
10:29 PM Bug report #5155 (Closed): memory layer attribute fields are combined when a memory layer or colu...
Yes, I can't find a recent copy of the profile from line plugin so I guess we'd better close it because we can't test... Alister Hood
10:29 PM Bug report #5155 (Closed): memory layer attribute fields are combined when a memory layer or colu...
Yes, I can't find a recent copy of the profile from line plugin so I guess we'd better close it because we can't test... Alister Hood
09:48 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
No.
"Problem 1" from my initial report is fixed.
"Problem 2" is partially fixed - if you manually edit the path it is...
Alister Hood
06:42 AM Bug report #6369 (Feedback): vsizip - relative paths not used & can't update path in "missing lay...
Hello, bug triage...
this seems to be fixed in QGIS 2.13 and probably in 2.12.1. Can you confirm ?
Médéric RIBREUX
09:29 PM Bug report #6230: Layer may become unselected after "paste style"
Yes, seems to be fixed. Alister Hood
07:02 AM Bug report #6230 (Feedback): Layer may become unselected after "paste style"
Hello, bug triage...
this seems to be fixed, at least in QGIS 2.13 master. The initial state (collapsed of expanded)...
Médéric RIBREUX
09:17 PM Bug report #5125: Inconsistent behaviour - whether or not newly added layers are automatically se...
I didn't test adding layers programmatically, but yes, I think it can be closed. Can anyone remind me whether the po... Alister Hood
07:39 PM Bug report #9714 (Closed): Show features count options on many layers doesn't work
Fixed in changeset commit:"4ca81bac2f5f226ed1d3278baaabb2429b7033a2". Nathan Woodrow
12:53 PM Bug report #9714: Show features count options on many layers doesn't work
See "PR 2576":https://github.com/qgis/QGIS/pull/2576 for a solution. Sebastian Dietrich
11:36 AM Bug report #9714: Show features count options on many layers doesn't work
Note that this also applies to the _Show in overview_ and _Make toplevel_ functions. Sebastian Dietrich
07:39 PM Bug report #4110 (Closed): order of layers changes when they are added to a group
Fixed in changeset commit:"b64ebfb2e25cf6c5eca12ead2e2f2b1f2dbe1376". Nathan Woodrow
05:50 PM Bug report #6410 (Closed): expanded layer collapses when clicking on the 'ok' or 'apply' buttons ...
Mathieu Pellerin - nIRV
06:56 AM Bug report #6410 (Feedback): expanded layer collapses when clicking on the 'ok' or 'apply' button...
Hello, bug triage...
the last part of the bug seems to be fixed (at least in QGIS 2.13 master): When I apply style o...
Médéric RIBREUX
02:58 PM Bug report #13983 (Closed): Split parts on MultiLineString: discards data
The issue is that geometry data is silently discarded when using the *Split Parts* tool on MultiLineString geometries... Mike Taves
01:34 PM Bug report #9585: Show features count doesn't kept after opening project
I can not reproduce in current master (commit:262514d97d0ac754e5c2989a2ae85c0eb54c7242).
Can this issue be closed?
Sebastian Dietrich
01:24 PM Bug report #9576: SLD rule-based style export loses quotes around layer names
I can not reproduce using the current master (commit:262514d97d0ac754e5c2989a2ae85c0eb54c7242).
What are the exact s...
Sebastian Dietrich
12:25 PM Bug report #6449 (Feedback): Big polygon in shapefile not shown in 1.8.0
Hello, bug triage...
in QGIS 2.13 master, I can display the shapefile but at certain zoom levels, some polygons are ...
Médéric RIBREUX
12:25 PM Bug report #6449 (Feedback): Big polygon in shapefile not shown in 1.8.0
Hello, bug triage...
in QGIS 2.13 master, I can display the shapefile but at certain zoom levels, some polygons are ...
Médéric RIBREUX
12:13 PM Bug report #13982 (Closed): QGIS crashes when plt.savefig() Matplotlib function is called
On Windows (Linux is not affected) when plt.savefig() function from Matplotlib library is called QGIS crashes. Empty ... Yury Ryabov
11:48 AM Bug report #6226 (Feedback): Primary key field hidden on attributes tables addes to qgis
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master (and it should also be the case in QGIS 2.12.1).
When ...
Médéric RIBREUX
11:38 AM Feature request #6297 (Feedback): Startup python script for all users
Hello, bug triage...
Nathan Woodrow wrote:
> Thanks. I'll have a look over it tonight.
well, this was a very long ...
Médéric RIBREUX
11:31 AM Feature request #6269 (Feedback): Better tokens for text replacement in Print Composer labels
Hello, bug triage...
Let sum it up. On QGIS 2.13 master we have:
* Can insert expressions in the composer.
* In the...
Médéric RIBREUX
10:41 AM Bug report #13686: [compile] qgis master fails with "error: ‘PyUnicode_AsUTF8’ was not declared i...
Same problem here for weeks. There is some related discussion on http://lists.osgeo.org/pipermail/qgis-developer/2015... Johannes Kroeger
09:12 AM Feature request #6201 (Closed): Option to disable automatic reclassification
Médéric RIBREUX
03:41 AM Feature request #6201: Option to disable automatic reclassification
I can confirm that indeed in 2.12 you need to click 'classify' to reclassify when changing the column. So for me, thi... Tammo Jan Dijkema
03:35 AM Feature request #6201 (In Progress): Option to disable automatic reclassification
Hello, bug triage...
I think this is fixed in QGIS 2.13 (and probably in earlier versions): when you change the colu...
Médéric RIBREUX
07:29 AM Bug report #13981 (Closed): Error while updating QGIS
Trying to update QGIS master and get an error:... dr -
07:28 AM Feature request #6310 (Feedback): Streamline all geoprocessing workflow
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a "Add result to canvas" check...
Médéric RIBREUX
07:04 AM Bug report #6097 (Feedback): Getting wrong attribute values from a feature in qgis
Hello, bug triage...
I can't reproduce it on QGIS master (2.13).
Can you confirm this ?
Médéric RIBREUX
06:49 AM Bug report #6375 (Feedback): svg and simple symbol mix do not scale the same way
Hello, bug triage...
it seems to be fixed, at least in QGIS 2.13. There is no more scale parameter (perhaps replaced...
Médéric RIBREUX
05:58 AM Feature request #6377 (Feedback): r.reclass path to reclass rules within modeler
Hello, bug triage...
to put a path in Processing modeler, you have to create an input with "File" type. Once done, y...
Médéric RIBREUX
04:31 AM Bug report #6218 (Feedback): Loading styles issue
Hello, bug triage...
I've made some tests on QGIS 2.13 master and when I load the qml with the wrong column name, ev...
Médéric RIBREUX
04:24 AM Feature request #6255: Add button to force recalculating stats of raster layers
The stats are certainly updated if the extent is changed, but
cannot check if they do in the case the extent remains ...
alobo -
04:09 AM Feature request #6255 (Feedback): Add button to force recalculating stats of raster layers
Hello, bug triage...
isn't it the case when you use the "Load" button and the Extent and accuracy options in Raster ...
Médéric RIBREUX
04:16 AM Bug report #6291 (Closed): python API provides removed blueBandName() for QgsRasterLayer (returni...
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is no blueBandName method for Qgs...
Médéric RIBREUX
04:16 AM Bug report #6291 (Closed): python API provides removed blueBandName() for QgsRasterLayer (returni...
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is no blueBandName method for Qgs...
Médéric RIBREUX
04:16 AM Bug report #6291 (Closed): python API provides removed blueBandName() for QgsRasterLayer (returni...
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is no blueBandName method for Qgs...
Médéric RIBREUX
04:04 AM Bug report #6246 (Closed): Edit widget "range": cannot set negative values
Hello, bug triage...
this is fixed, at least in QGIS 2.13...
I am closing this bug.
Médéric RIBREUX
04:04 AM Bug report #6246 (Closed): Edit widget "range": cannot set negative values
Hello, bug triage...
this is fixed, at least in QGIS 2.13...
I am closing this bug.
Médéric RIBREUX
04:04 AM Bug report #6246 (Closed): Edit widget "range": cannot set negative values
Hello, bug triage...
this is fixed, at least in QGIS 2.13...
I am closing this bug.
Médéric RIBREUX
03:48 AM Bug report #6210 (Feedback): Choosing the CRS from the "recently used CRS" does nothing (on the f...
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master (it should also work on QGIS 2.12.1).
Can you confirm ?
Médéric RIBREUX
03:19 AM Bug report #6187 (Feedback): Raster disappears when bands change
Hello, bug triage...
I can't reproduce this bug on QGIS 2.13 master (should be the same with QGIS 2.12.1).
Can you ...
Médéric RIBREUX
02:59 AM Bug report #6131 (Feedback): New layer creation file browser doesn't resolve aliases in MacOS
Hello, bug triage...
do you still have this bug with the latest QGIS version (2.12.1) ?
Médéric RIBREUX
02:48 AM Feature request #10323 (Closed): copy/paste style for multiple layers
Fixed in changeset commit:"f0aeee8c5be6ed29ffc2ff636bc59c68cac19585". Salvatore Larosa
02:32 AM Bug report #13980 (Closed): Unable to open files from Python console editor
When I click on the Open File button in the editor dialog in the Python console, QGIS fails to open the file browser ... Jesse Taylor
02:10 AM Feature request #5903 (Feedback): For raster data store min-max in the project file
Hello, bug triage...
in QGIS 2.13 master, when I save a raster, it seems that min/max values are stored in the proje...
Médéric RIBREUX
02:03 AM Feature request #5898 (Feedback): Layersets
Hello, bug triage...
I think we can xlose it because in QGIS 2.12 (and probably in earlier versions), there is the "...
Médéric RIBREUX
02:00 AM Bug report #5875 (Feedback): QGIS doesn't use its own GDAL tools and fails if another version of ...
Hello, bug triage...
do you still have this problem ? I can't reproduce it on Windows 7 with QGIS 2.12.1 but perhaps...
Médéric RIBREUX

2015-12-12

12:50 AM Bug report #7905 (Closed): unset keyboard shortcuts are not remembered
Fixed in changeset commit:"aedcf3a76b6690a167dbf62f82699f240d2aa63b". Nyall Dawson
07:33 PM Bug report #8320 (Closed): Order of predefined scale settings wrong
Fixed in changeset commit:"7f674a4e965968451dd95eb2c7b91e0d932d3714". Nyall Dawson
05:11 PM Bug report #3618 (Closed): Annotations are not reprojected correctly
Fixed in changeset commit:"2982082f12e6201476d3bfe2bcc8447815c5ab8c". Nyall Dawson
12:02 PM Bug report #13642 (Closed): Disabling the GdalTools plugin doesn't clear its tools under Raster menu
Fixed in changeset commit:"666eda68560c73ff72e2e1efb82a1d00a5eb48ff". Jürgen Fischer
08:38 AM Bug report #13642: Disabling the GdalTools plugin doesn't clear its tools under Raster menu
See "PR 2574":https://github.com/qgis/QGIS/pull/2574 for a solution. Sebastian Dietrich
12:01 PM Feature request #6197 (Closed): New filetype extensions for SpatiaLite
Fixed in changeset commit:"f8c4b3a21cb13cc0871cb0fb2ec9b231742b71d5". Jürgen Fischer
12:01 PM Feature request #5242 (Closed): Open KMZ without needing to unzip
Fixed in changeset commit:"f8c4b3a21cb13cc0871cb0fb2ec9b231742b71d5". Jürgen Fischer
12:01 PM Feature request #4362 (Closed): File dialogues should recognise VRT files with .ovf and .ovr exte...
Fixed in changeset commit:"f8c4b3a21cb13cc0871cb0fb2ec9b231742b71d5". Jürgen Fischer
12:01 PM Feature request #3799 (Closed): Cannot add new OGR layer types
Fixed in changeset commit:"f8c4b3a21cb13cc0871cb0fb2ec9b231742b71d5". Jürgen Fischer
07:38 AM Feature request #5857 (Open): Make QGIS support WCS layers as valid raster input layers
Médéric RIBREUX wrote:
> Hello, bug triage...
>
> this should be fixed with the QGIS WCS client. I've just tested it...
Giovanni Manghi
07:32 AM Feature request #5857 (Feedback): Make QGIS support WCS layers as valid raster input layers
Hello, bug triage...
this should be fixed with the QGIS WCS client. I've just tested it on this server: http://webma...
Médéric RIBREUX
07:37 AM Bug report #5851 (Feedback): WMS projection from EPSG:4326 to EPSG:900913 cut part of the layer
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master (it should also work in QGIS 2.12.1). I am using the s...
Médéric RIBREUX
07:25 AM Bug report #6438 (Closed): grass641 is not available
Hello, bug triage...
on Debian Stable (Jessie) and Testing (Stretch), QGIS can compile without any problem with the ...
Médéric RIBREUX
07:25 AM Bug report #6438 (Closed): grass641 is not available
Hello, bug triage...
on Debian Stable (Jessie) and Testing (Stretch), QGIS can compile without any problem with the ...
Médéric RIBREUX
07:25 AM Bug report #6438 (Closed): grass641 is not available
Hello, bug triage...
on Debian Stable (Jessie) and Testing (Stretch), QGIS can compile without any problem with the ...
Médéric RIBREUX
07:12 AM Bug report #13979 (Closed): Legend Item Properties - Symbol Size
In Item Properties for a Legend in Print Composer, the size of symbols is displayed too large when the size of the sy... Harry Clarke
06:55 AM Bug report #13931: QGIS 2.12.1 - Filter legend by map content has new bug
I have a similar problem that the Filter Legend by map content is not working correctly. In one layer which has one s... Harry Clarke
03:08 AM Bug report #4518 (Open): Rotation of labels and symbols should be in the same direction
Médéric RIBREUX
03:03 AM Bug report #3551 (Open): Selecting with mouse in table
Médéric RIBREUX
03:02 AM Bug report #3539 (Open): v.to.db: allow selecting 2/3 columns
Médéric RIBREUX
03:00 AM Bug report #3155 (Open): Zoom to layer works incorrectly while layer editing
Médéric RIBREUX
02:59 AM Bug report #3089 (Open): Problem with On-the-fly CRS transformation
Médéric RIBREUX
02:59 AM Bug report #1796 (Open): Multi-line text in a SVG file is not drawn correctly in Print Composer
Médéric RIBREUX

2015-12-11

07:31 AM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
The following works in PyQt4, but I did not heavily test. For tests I did see the uploaded file. Perhaps this could b... Dewey Dunnington
03:04 AM Feature request #13978 (Open): Add vector ARC/INFO Binary Coverage to include INFO table attribut...
When adding vectors from ARC/INFO Binary Coverage folder, QGIS is not picking the attributes that are stored in "info... Davor Lister
01:53 AM Bug report #13977: QgsVectorFileWriter: bug at saving vector layer to shapefile
Platform used while detecting this bug was Windows 7. I don't know know about Linux, where case sensitivity of paths ... Hannes Kohlmann
01:49 AM Bug report #13977 (Closed): QgsVectorFileWriter: bug at saving vector layer to shapefile
When trying to save a layer, I get error number 3 in the case of the following example:
@QgsVectorFileWriter.writeAsV...
Hannes Kohlmann
01:36 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers
I copied my project to a local drive and I realized that it didn't change the matter.
Project with 6 composers: 26 s...
Per Gammerath
01:24 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers
It seems that this issue is more acute when projects are loaded from a network drive, as Lene Fischer stated in comme... Per Gammerath

2015-12-10

12:53 AM Bug report #13976 (Feedback): Missing strings in translation file
The ts files weren't changed between "2.12.0 and 2.12.1":https://github.com/qgis/QGIS/compare/final-2_12_0...final-2_... Jürgen Fischer
12:41 AM Bug report #13976 (Closed): Missing strings in translation file
In context "QgsExpressionBuilderWidgetBase" in QGIS 2.12.1 the strings "Run script", "Save file" and "Save the curren... Marina Pavlova
09:18 PM Feature request #5603 (Closed): Add support for project files in the QGIS browser
Added to master now. commit:ffd7c9436fb2888b8e5ada52968d231f49173876 Nathan Woodrow
09:18 PM Feature request #5603 (Closed): Add support for project files in the QGIS browser
Added to master now. commit:ffd7c9436fb2888b8e5ada52968d231f49173876 Nathan Woodrow
02:59 PM Bug report #13975 (Closed): Lithuanian Raster Menu
The raster menu in the Lithuanian locale is broken into two different menus. See the duplicate Rastras entries in the... Zac Flamig
01:08 PM Bug report #13971 (Closed): Merge attributes tool is broken
Fixed in changeset commit:"b23ddfe2b4f767bde4f0ab89303739cadfa114ef". Nyall Dawson
02:46 AM Bug report #13971 (Closed): Merge attributes tool is broken
Using the "take attributes from the selected feature" option, all numeric values are set to 0 while strings are NULL
...
Harrissou Santanna
10:45 AM Feature request #13974 (Open): Expression for Map Composer Legend
The ability to use an expression for the legend text.
For certain very large shapefiles, with 1000's of features, it ...
Chris Paul
10:27 AM Bug report #13973 (Closed): Crash when switching from custom renderer to another
Subject says it all. To reproduce:
# add custom renderer for vector layer (e.g. one from "VectorFieldRenderer":http:...
Alexander Bruy
09:23 AM Bug report #13256 (Closed): Shapefile corrupted on edit
Thanks. Looks like this is part of the issue reported at #11007 (also connected with the issue linked above). Spencer Gardner
09:22 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
There is no dbf, as there are no attributes. This is a Matlab export. Matlab does not create a dbf if there are no at... Karl Kastner
07:19 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
The archive is missing the dbf. Jürgen Fischer
04:27 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
The kernel output is mostly useless. Please attach the shape file. Jürgen Fischer
03:10 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Thanks for the advice to add the LTR repository. The bug also affects 2.8.4. It does not occur on every deletion thou... Karl Kastner
09:20 AM Bug report #13972 (Closed): Categorize symbols uses wrong field after table join
I have two layers: Layer A and Layer B. Layer A is a shapefile. Layer B is from an ESRI File Geodatabase. If I join L... Spencer Gardner
02:50 AM Bug report #13482: only first element selectable in spatialite layer
I also notice this behavior on spatialite database created by "Offline editing" tool. I have to note that the ID is n... Grga Franges
02:44 AM Feature request #4476: Add a 2 cases if() command to Raster Calculator
Well, that syntax is really odd, I had not even thought on it.
I guess that
if(condition, result1, result2)
would be ...
alobo -
02:44 AM Bug report #13970 (Closed): Relation reference widget does not retain values
After a relation reference widget is filled, form closed and layer edits saved, the id of related feature is saved in... Grga Franges

2015-12-09

12:15 AM Feature request #5339: Allow to use the line styles as styles for polygon borders
Sorry, I didn't test enough to see that the line styles in the library were composed of marker and simple lines. Nice... Médéric RIBREUX
06:52 PM Feature request #5339 (Closed): Allow to use the line styles as styles for polygon borders
Yes, this is possible now. You can style polygons with "outline: simple line" or "outline: marker line" symbol types. Nyall Dawson
06:52 PM Feature request #5339 (Closed): Allow to use the line styles as styles for polygon borders
Yes, this is possible now. You can style polygons with "outline: simple line" or "outline: marker line" symbol types. Nyall Dawson
02:28 AM Feature request #5339: Allow to use the line styles as styles for polygon borders
Hello, bug triage...
still true in QGIS 2.13 master. We need a new symbol level which could be named as "outline: co...
Médéric RIBREUX
08:26 PM Bug report #13969 (Closed): Status WiKi
What is the status of the QGIS wiki? The how_do_I_do page https://issues.qgis.org/projects/quantum-gis/wiki/How_do_I_... Jan Hoogendoorn
06:53 PM Bug report #5590 (Open): Arrow in composer - "bounding box" corners
It's still an issue... not as bad as it used to be, but still needs addressing. Nyall Dawson
03:36 AM Bug report #5590 (Feedback): Arrow in composer - "bounding box" corners
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master. Can you confirm this bug is fixed (I think it is) ?
Médéric RIBREUX
06:23 PM Feature request #13968 (Open): split vector shp by vector shp to many shp
In ArcGIS there is split tool that is used to split vector polygon by polygon vector to produce many shapefile. Can Q... mega saputra
04:10 PM Bug report #5780: Most labels in menus are in Title Case
Go to the last section on this page: http://www.qgis.org/de/site/getinvolved/development/qgisdevelopersguide.html Alister Hood
11:00 AM Bug report #5780 (Feedback): Most labels in menus are in Title Case
Hello, bug triage...
where can I find the QGIS Developper Manual (or a reference document on HIG) to see if we can c...
Médéric RIBREUX
01:29 PM Bug report #13967 (Closed): gdal_merge crashes python
Using gdal_merge in OSGeoW4 shell or from qgis terminates with a properly merged file but with a python crash once th... Nicolas Cadieux
11:19 AM Feature request #6197 (Feedback): New filetype extensions for SpatiaLite
Hello, bug triage...
to sum up:
* Add .db3, .s3db, .sqlite3, .db3, .s3db, .sqlite3 to OGR provider/Add Spatialite L...
Médéric RIBREUX
10:58 AM Bug report #5748 (Feedback): QgsRasterLayer::setDrawingStyle() doesn't work
Hello, bug triage...
in QGIS 2.13 master, when I set a raster from single band to pseudo-color from the layer proper...
Médéric RIBREUX
10:52 AM Bug report #5786 (Feedback): "Text annotation" map tool not correctly interacting with other map ...
Médéric RIBREUX
10:50 AM Bug report #5786: "Text annotation" map tool not correctly interacting with other map tools
Hello, bug triage...
I think this is fixed (at least in QGIS 2.13 master): whenever I press on the text annotation, ...
Médéric RIBREUX
09:26 AM Feature request #4820: Color interpolation "exact" does not work
Médéric RIBREUX wrote:
> Hello,
>
> ok, I've found it... but what should be done ? Should we disable totally the "Ge...
Giovanni Manghi
09:24 AM Feature request #4820: Color interpolation "exact" does not work
Hello,
ok, I've found it... but what should be done ? Should we disable totally the "Generate new color map" groupbo...
Médéric RIBREUX
05:03 AM Feature request #4820 (Open): Color interpolation "exact" does not work

> where can we find this option in the actual raster properties ? I can't find it anywhere...
raster properties, sy...
Giovanni Manghi
09:18 AM Bug report #5744: Apply and Cancel buttons don't change language
We don't maintain the Qt translations - which contain "Apply" and "Cancel". So sometimes the QGIS interface appears t... Jürgen Fischer
09:08 AM Bug report #5744 (Feedback): Apply and Cancel buttons don't change language
Hello, bug triage...
it seems that at least in QGIS 2.13 master (and probably in 2.12.1), "Apply" and "Cancel" butto...
Médéric RIBREUX
09:14 AM Bug report #4413 (Closed): Generating SVG preview takes very long
Hello, bug triage...
it needs about 3 seconds on a low CPU (AMD A4-5000 1.5 GHz) to be displayed.
I am closing this...
Médéric RIBREUX
09:14 AM Bug report #4413 (Closed): Generating SVG preview takes very long
Hello, bug triage...
it needs about 3 seconds on a low CPU (AMD A4-5000 1.5 GHz) to be displayed.
I am closing this...
Médéric RIBREUX
09:14 AM Bug report #4413 (Closed): Generating SVG preview takes very long
Hello, bug triage...
it needs about 3 seconds on a low CPU (AMD A4-5000 1.5 GHz) to be displayed.
I am closing this...
Médéric RIBREUX
08:59 AM Feature request #5540 (Closed): Add paper units to print composer bar scale segment size
Médéric RIBREUX
05:11 AM Feature request #5540: Add paper units to print composer bar scale segment size
I agree there is nothing missing, please close this issue. Ed B
03:11 AM Feature request #5540 (Feedback): Add paper units to print composer bar scale segment size
Hello, bug triage...
in QGIS 2.13 master (and probably in QGIS 2.12.1), you can set a fixed size (between a minimum ...
Médéric RIBREUX
06:54 AM Feature request #6894: GRASS r.mapcalc cumbersome to use, issues on Windows
Giovanni Manghi wrote:
> there is hope see
>
> https://trac.osgeo.org/grass/ticket/2592
I'm not sure that this new ...
Giovanni Manghi
05:58 AM Bug report #5616: "Add" button is enabled when no PostGIS layers are selected
Hello, bug triage...
still true in QGIS 2.13...
Médéric RIBREUX
05:52 AM Feature request #5651: add the "-wo OPTIMIZE_SIZE=TRUE" option to the warp tool
Hello, bug triage...
still true for QGIS 2.13 master. It could also be good to add this option to Processing GDAL wa...
Médéric RIBREUX
05:38 AM Feature request #5606: Defining column types for CSV imports
Hello, bug triage...
the PR has been merged.
One good idea (on the GUI part) would be to try to make the delimited ...
Médéric RIBREUX
05:24 AM Bug report #5602 (Feedback): Identify disabled in WMS for grouped layers
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master on BRGM WMS services on http://geoservices.brgm.fr/geo...
Médéric RIBREUX
05:16 AM Feature request #5560: add option for field display order in identify window
Yep, I had not been focusing on that part. It is solved. Regis Haubourg
03:47 AM Feature request #5560 (Feedback): add option for field display order in identify window
Regis Haubourg wrote:
> Hi,
> could we imagine that field id is used to order identify results at start, and then le...
Médéric RIBREUX
05:00 AM Feature request #5587 (Closed): v.in.ogr.qgis should allow us to ignore details
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a ??-t?? parameter on v.in.ogr...
Médéric RIBREUX
05:00 AM Feature request #5587 (Closed): v.in.ogr.qgis should allow us to ignore details
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a ??-t?? parameter on v.in.ogr...
Médéric RIBREUX
05:00 AM Feature request #5587 (Closed): v.in.ogr.qgis should allow us to ignore details
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a ??-t?? parameter on v.in.ogr...
Médéric RIBREUX
05:00 AM Feature request #5587 (Closed): v.in.ogr.qgis should allow us to ignore details
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a ??-t?? parameter on v.in.ogr...
Médéric RIBREUX
05:00 AM Feature request #5587 (Closed): v.in.ogr.qgis should allow us to ignore details
Hello, bug triage...
in QGIS 2.13 master (and probably in earlier versions), there is a ??-t?? parameter on v.in.ogr...
Médéric RIBREUX
04:37 AM Bug report #13966 (Closed): error executing init function if project and function is located in d...
If you create a project including a init function and locate the files in a directory containing non-ascii characters... Bo Victor Thomsen
03:34 AM Feature request #5569 (Feedback): Turn all attribute table buttons into right click options
Hello, bug triage...
For the moment, Right-clicking in the attribute table displays a submenu with two entries (Sele...
Médéric RIBREUX
03:00 AM Feature request #5516 (Feedback): Better sorting of menus
Hello, bug triage...
I think this is fixed since at least QGIS 2.6 ?
Can someone confirm that nothing is missing in...
Médéric RIBREUX
02:58 AM Bug report #5498 (Feedback): Make the default directory to the users "home" directory after a fre...
Hello, bug triage...
I think this should have been fixed by "this commit":#aeafe3c88473f09b0daa434b66ba16f34c449a3e ...
Médéric RIBREUX
02:48 AM Feature request #5426 (Closed): selected objects should go to top level
Hello, bug triage...
this is a duplicate of #5411.
I am closing it !
Médéric RIBREUX
02:48 AM Feature request #5426 (Closed): selected objects should go to top level
Hello, bug triage...
this is a duplicate of #5411.
I am closing it !
Médéric RIBREUX
02:19 AM Feature request #13965 (Closed): Plugin installer, change tabulation order so that "enter" in plu...
Hi,
I have been tricked a few times by this UI design.
When doing a search in plugin installer, I use to type "Carr...
Regis Haubourg
02:09 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
Hello, bug triage...
in QGIS 2.13 master, the bug seems to be fixed: I've got null values for both columns and the g...
Médéric RIBREUX
02:09 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
Hello, bug triage...
in QGIS 2.13 master, the bug seems to be fixed: I've got null values for both columns and the g...
Médéric RIBREUX
02:09 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
Hello, bug triage...
in QGIS 2.13 master, the bug seems to be fixed: I've got null values for both columns and the g...
Médéric RIBREUX
01:57 AM Bug report #5321 (Feedback): Inserting geometries using a WFS-T of ArcGIS Server
Hello, bug triage...
do you still have this bug in the WFS client of a recent version of QGIS (2.12.1 or master) ?
I...
Médéric RIBREUX
01:49 AM Bug report #13571: data defined size assistant displays different size in legend vs canvas
Hi, I would be very thanksfull if a backport to 2.12 could be done. (christmas is coming...)
We financed this since 2...
Regis Haubourg
01:49 AM Bug report #5258: WMS layer properties should be updated upon visiting the 'layer properties' dialog
Hello, bug triage...
seems to be still true for QGIS 2.13. Perhaps should we add a refresh button on metadata tab to...
Médéric RIBREUX
01:47 AM Feature request #13570: size varying assistant not available for line layers
Partially solved in PR https://github.com/qgis/QGIS/pull/2414. Still misses legend in registry. Regis Haubourg
01:09 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Karl Kastner wrote:
> Release 2.8.4 is not in the repositories, at least neither in http://qgis.org/ubuntugis nor in ...
Jürgen Fischer
01:00 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Release 2.12.1 segfaults immediately at start up. This has to do with python plugins, because it starts up if the pac... Karl Kastner

2015-12-08

12:58 AM Bug report #13963: QGIS greadily allocates memory and crashes when editing moderately large shape...
Release 2.12.1 segfaults immediately at start up. This has to do with python plugins, because it starts up if the pac... Karl Kastner
08:55 PM Bug report #13963 (Feedback): QGIS greadily allocates memory and crashes when editing moderately ...
Please test with 2.8.4 or 2.12.1 Nyall Dawson
09:35 AM Bug report #13963 (Closed): QGIS greadily allocates memory and crashes when editing moderately la...
When editing moderately large shapefiles (228428 points, 1.1MB << 1% total RAM). QGIS starts to allocate huge amounts... Karl Kastner
12:58 AM Feature request #5242 (In Progress): Open KMZ without needing to unzip
Hello, bug triage...
QGIS 2.13 master can open kmz files... but it lacks the *.kmz filter in the OGR file selector.
...
Médéric RIBREUX
12:58 AM Feature request #5242 (In Progress): Open KMZ without needing to unzip
Hello, bug triage...
QGIS 2.13 master can open kmz files... but it lacks the *.kmz filter in the OGR file selector.
...
Médéric RIBREUX
12:43 AM Bug report #5232: "add direction symbol" does not work with curved labels
Hello, bug triage...
just for information, this bug is still true for QGIS 2.13 master.
Médéric RIBREUX
12:12 AM Bug report #13964 (Closed): Untranslatable strings in Processing
Fixed in changeset commit:"6c3141b605c07bc40f35fd9a23089420445cec12". Jürgen Fischer
10:59 PM Bug report #13964 (Closed): Untranslatable strings in Processing
The strings "Geoalgorithms" (in Processing Toolbox simplified interface), "Run", "Run as batch process..." and "Help"... Marina Pavlova
10:42 PM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
The main issue here is that stream the file so we can't just do a normal replace like you would.
We could do somet...
Nathan Woodrow
10:31 PM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
This is how EndOfLine is used in the Qt source
@
case EndOfLine:
778 if (ch == QLatin1Char('\
...
Nathan Woodrow
06:08 PM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
If it were a Python issue I'd happily fix it, but I know nothing about C++ so it would be a bad idea for me to try. Q... Dewey Dunnington
01:38 PM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
Since the "corresponding Qt-Bug":https://bugreports.qt.io/browse/QTBUG-18038 is set to _won't fix_ you would have to ... Sebastian Dietrich
09:52 AM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
I agree it's odd behaviour and definitely Excel's fault, but it's difficult to run tutorials having to tell people th... Dewey Dunnington
09:46 AM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
QGIS (Qt's TextStream) expects "\
\
" (CRLF; windows/dos style) or "\
" (LF; unixoid) as line ending. Nowadays "\
" ...
Jürgen Fischer
09:37 AM Bug report #13962: Text delimited file with carriage return line endings will not load in QGIS
Note: via OGR it works (ie. "Add Vector Layer" / drag & drop into qgis window) Jürgen Fischer
09:27 AM Bug report #13962 (Closed): Text delimited file with carriage return line endings will not load i...
I am trying to load a .csv with carriage return line endings (the default for Microsoft Excel in Mac OSX). This has b... Dewey Dunnington
02:56 PM Bug report #8320: Order of predefined scale settings wrong
See "PR 2558":https://github.com/qgis/QGIS/pull/2558 for a solution. Sebastian Dietrich
09:02 AM Feature request #5221 (Closed): Write QPJ file when defining CRS for layer
Hello, bug triage...
Ok I am closing it because fTools works...
Médéric RIBREUX
09:02 AM Feature request #5221 (Closed): Write QPJ file when defining CRS for layer
Hello, bug triage...
Ok I am closing it because fTools works...
Médéric RIBREUX
09:02 AM Feature request #5221 (Closed): Write QPJ file when defining CRS for layer
Hello, bug triage...
Ok I am closing it because fTools works...
Médéric RIBREUX
08:46 AM Bug report #5183 (Closed): Scale bar has wrong units for GeoJSON layer
Hello, bug triage...
well, if this is not a bug, I am pleased to close it !
Médéric RIBREUX
08:46 AM Bug report #5183 (Closed): Scale bar has wrong units for GeoJSON layer
Hello, bug triage...
well, if this is not a bug, I am pleased to close it !
Médéric RIBREUX
08:45 AM Bug report #5173 (Feedback): Shape file field precision includes the . when saving, but not when ...
Hello, bug triage...
I can't reproduce it on QGIS 2.13 master (have set a decimal field of size 3 and precision 2).
...
Médéric RIBREUX
08:41 AM Bug report #5155 (Feedback): memory layer attribute fields are combined when a memory layer or co...
Hello, bug triage...
I think we can close this bug. The new memory layer has been implemented in QGIS core (the old ...
Médéric RIBREUX
08:37 AM Bug report #5154 (In Progress): Need to check that precision<field width when adding a column
Hello, bug triage...
in QGIS 2.13 master, you can't set a precision greater than the field length for decimal number...
Médéric RIBREUX
08:26 AM Feature request #5138 (Feedback): A window should display a message about D&D feature
Hello, bug triage...
for the moment, there is no popup window on DBManager and I think this is good because DBManage...
Médéric RIBREUX
08:20 AM Feature request #5137 (Feedback): Allow save results from RoadGraph plugin as an OGR datasource (...
Hello, bug triage...
on QGIS 2.13 master, when you export the results of the roadgraph plugin, you can choose betwee...
Médéric RIBREUX
08:14 AM Bug report #5125 (Feedback): Inconsistent behaviour - whether or not newly added layers are autom...
Hello, bug triage...
in QGIS 2.13 master (and probably in previous versions), the newly added layer is automatically...
Médéric RIBREUX
08:05 AM Feature request #5117 (Feedback): Make the first column of the Attribute Table show feature ID
Hello, bug triage...
I think this is fixed in QGIS 2.13 (and probably in previous versions). Here is what I've found...
Médéric RIBREUX
07:59 AM Feature request #5122 (Feedback): Temporal data, timestamps, and symbolizing based on date
Hello, bug triage...
since QGIS 2.12, the time capabilities of QGIS have greatly evolved:
- There is a better suppo...
Médéric RIBREUX
07:46 AM Feature request #5115 (Feedback): Save more than one style in a .qml file and give user a choice ...
Hello, bug triage...
multi-style for layers is completely implemented in QGIS 2.13 master (and in previous versions)...
Médéric RIBREUX
07:46 AM Feature request #5115 (Feedback): Save more than one style in a .qml file and give user a choice ...
Hello, bug triage...
multi-style for layers is completely implemented in QGIS 2.13 master (and in previous versions)...
Médéric RIBREUX
07:37 AM Bug report #5085 (Closed): Font size is not correctly exported to SVG/PDF
Yes, the font size seems correct now. Thanks for checking! Anita Graser
07:37 AM Bug report #5085 (Closed): Font size is not correctly exported to SVG/PDF
Yes, the font size seems correct now. Thanks for checking! Anita Graser
07:18 AM Bug report #5085 (Feedback): Font size is not correctly exported to SVG/PDF
Hello, bug triage...
on QGIS 2.13 master, the SVG conversion of a label in DejaVu Sans 10 gives a DejaVu Sans 9,9188...
Médéric RIBREUX
07:36 AM Bug report #13866: Copy Paste attribute table from postgres causes crash
Worse than this, it is not possible at all to copy lines from attribute table, from menu. It is greyed out there, whe... Regis Haubourg
07:33 AM Feature request #5093 (Closed): Cancel current canvas redraw on a new redraw request
Hello, bug triage...
this is fixed in QGIS 2.13 and in previous versions. There is a new rendering engine and when I...
Médéric RIBREUX
07:33 AM Feature request #5093 (Closed): Cancel current canvas redraw on a new redraw request
Hello, bug triage...
this is fixed in QGIS 2.13 and in previous versions. There is a new rendering engine and when I...
Médéric RIBREUX
07:33 AM Feature request #5093 (Closed): Cancel current canvas redraw on a new redraw request
Hello, bug triage...
this is fixed in QGIS 2.13 and in previous versions. There is a new rendering engine and when I...
Médéric RIBREUX
07:24 AM Bug report #5087 (Feedback): An action that makes the Identify Results dock appear forces a compl...
Hello, bug triage...
seems to be fixed, at least in QGIS 2.13 master in MS Windows 7 x64. Can you confirm it (I have...
Médéric RIBREUX
07:20 AM Bug report #13948 (Closed): PyQGIS doesn't work
Fixed in changeset commit:"197ee6cb3a95fafc6f119d3a4cfad04e27de8468". Anonymous
07:08 AM Bug report #5079 (Feedback): Error adding WFS layer from an Intergraph WebMap WFS
Hello, bug triage...
as the WFS service is not public and it is not easy to set up a dedicated Intergraph server, wo...
Médéric RIBREUX
06:59 AM Bug report #5051 (Closed): SPIT should add indexes to key and geometry fields
Hello, bug triage...
as said in previous bug, SPIT has been removed from QGIS and I am closing this bug !
Médéric RIBREUX
06:59 AM Bug report #5051 (Closed): SPIT should add indexes to key and geometry fields
Hello, bug triage...
as said in previous bug, SPIT has been removed from QGIS and I am closing this bug !
Médéric RIBREUX
06:58 AM Feature request #5050 (Closed): If SHP is currently-selected layer, SPIT should be prepoulated wi...
Hello, bug triage...
SPIT has been removed from QGIS, use Processing Import into PostGIS instead.
I am closing this...
Médéric RIBREUX
06:58 AM Feature request #5050 (Closed): If SHP is currently-selected layer, SPIT should be prepoulated wi...
Hello, bug triage...
SPIT has been removed from QGIS, use Processing Import into PostGIS instead.
I am closing this...
Médéric RIBREUX
04:35 AM Bug report #13947: postgis tables with inherits can lead to not unique QgsFeature.id
Nice fix :-)
The actual problem is the incomplete support for inheritance in PostgreSQL. _Inheritance_ together with...
Sebastian Dietrich
02:06 AM Bug report #13947 (Closed): postgis tables with inherits can lead to not unique QgsFeature.id
Fixed in changeset commit:"269f70928571be08fe67d14eb43bda77945d8773". Jürgen Fischer
03:19 AM Bug report #13941: Debian build failure.
see also https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=807170 (issue opened for Qt4 Debian maintainers) Richard Duivenvoorde
02:47 AM Bug report #13960 (Closed): Edit widget configuration is stored twice
Hello,
since at least QGIS 2.4 (and probably in earlier versions), the XML configuration of the edit widgets is stor...
Médéric RIBREUX
01:16 AM Bug report #11007: Deleted/edited features within SHAPEFILE are still recognized in other softwar...
Hi,
IF you're opening attribute table, select all in attribute table, and save as with the option only selected featu...
jerome andal

2015-12-07

12:36 AM Bug report #13947 (Reopened): postgis tables with inherits can lead to not unique QgsFeature.id
The patch does not cover the case in which use estimated metadata is true. Alessandro Pasotti
12:34 AM Bug report #13959: Filtering legend by expression hides unselected items
Reproduced. I will have a look soon Hugo Mercier
12:10 AM Bug report #13948: PyQGIS doesn't work
Matthias Kuhn wrote:
> Do you run "make install"?
> Can you run from the build directory?
I'm using QGIS from packag...
dr -
 

Also available in: Atom