Activity

From 2015-04-26 to 2015-05-25

2015-05-25

08:16 PM Bug report #12793: Minidump when adding a layer (vector, raster, etc.)
I made a backup of the original .qgis2 folder but still the same issue.
I also did a fresh install to the most recent...
Oscar Alvarez
07:22 PM Bug report #12821 (Closed): Error in Processing documentation
There is an error in the page:
https://docs.qgis.org/2.8/en/docs/user_manual/processing/3rdParty.html
where it is wr...
Rodrigo Trevisan
04:37 PM Bug report #11546 (Reopened): QGIS crash/close unexpectedly after some actions
I'm on Debian stretch/sid 61-bit with QGIS 2.8.1 and this started happening to me last week after a routine system up... Valerie Anderson
01:23 PM Bug report #12813: Node tool on PostGIS table with null geometry causes crash
I've just tried it on 2.9.0-Master (on Windows) 32 and 64 bit versions, and I get the same error.
Also, noticed that...
Simon Casley
10:54 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
Paolo Cavallini wrote:
> Verified on several machines during the workshop at the HF in Nodebo.
I have tested 5/6 lin...
Giovanni Manghi
10:26 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
Verified on several machines during the workshop at the HF in Nodebo. Paolo Cavallini
10:25 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
please test also on other machines. Giovanni Manghi
10:25 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
tested again with numbers too, all ok. Giovanni Manghi
10:16 AM Bug report #8511: Iterations: autofill mode fills the output name in a wrong way under Linux
Checked again, on current master and ``pippo`` becomes ``pipp1o`` when autofilled with numbers. Paolo Cavallini
09:02 AM Bug report #8511 (Feedback): Iterations: autofill mode fills the output name in a wrong way under...
just tested on a clean installation of master and works as expected (ubuntu). Giovanni Manghi
08:42 AM Bug report #8511 (Reopened): Iterations: autofill mode fills the output name in a wrong way under...
I do not confir, still true here; verified also during the workshop at the HF in Nodebo. Paolo Cavallini
08:42 AM Bug report #8511 (Reopened): Iterations: autofill mode fills the output name in a wrong way under...
I do not confir, still true here; verified also during the workshop at the HF in Nodebo. Paolo Cavallini
08:35 AM Bug report #8511 (Closed): Iterations: autofill mode fills the output name in a wrong way under L...
it is fine in master, please reopen if necessary. Giovanni Manghi
08:35 AM Bug report #8511 (Closed): Iterations: autofill mode fills the output name in a wrong way under L...
it is fine in master, please reopen if necessary. Giovanni Manghi
10:00 AM Bug report #12789: r.surf.area misses an output
fixed with https://github.com/qgis/QGIS/pull/2076
HTML output is broken in any module
See #6379
Giovanni Manghi
10:00 AM Bug report #12789: r.surf.area misses an output
fixed with https://github.com/qgis/QGIS/pull/2076
HTML output is broken in any module
See #6379
Giovanni Manghi
08:58 AM Bug report #12703 (Closed): Help for all SAGA processing modules missing
Giovanni Manghi
08:31 AM Bug report #12335: Processing can't find SAGA in Debian [regression]
Not confirmed here, on Sid. Paolo Cavallini
08:30 AM Bug report #12335 (Feedback): Processing can't find SAGA in Debian [regression]
is this still true? Giovanni Manghi
08:08 AM Bug report #8742 (Closed): Reproject layer does not work with custom CRS
seems to work fine in the latest master, please reopen if necessary. Giovanni Manghi
08:08 AM Bug report #8742 (Closed): Reproject layer does not work with custom CRS
seems to work fine in the latest master, please reopen if necessary. Giovanni Manghi
07:55 AM Bug report #9925 (Closed): Source SRS not recognized for rasters
Tested with 6 differnt raster, now it seems to work. Probably fixed in the meantime. Paolo Cavallini
07:55 AM Bug report #9925 (Closed): Source SRS not recognized for rasters
Tested with 6 differnt raster, now it seems to work. Probably fixed in the meantime. Paolo Cavallini
07:46 AM Bug report #9925 (Feedback): Source SRS not recognized for rasters
please attach sample data. Giovanni Manghi
07:51 AM Bug report #7697 (Feedback): GRASS commands, OS X not working
Is this still an issue? I have recently given training to people with OsX and they had no problems in running QGIS/Pr... Giovanni Manghi
07:51 AM Bug report #7697 (Feedback): GRASS commands, OS X not working
Is this still an issue? I have recently given training to people with OsX and they had no problems in running QGIS/Pr... Giovanni Manghi
07:29 AM Bug report #12655 (Closed): Copy / paste style on different geometry layers
Fixed in changeset commit:"0b9ea9a6160b17294b46b070c1b491bdebb93865". Hugo Mercier
05:48 AM Bug report #9902: Using v.voronoi with "output tessellation as graph" returns point result
The reason for this is that the line output is written by GRASS into the 0_ layer and not the 1_ layer that is the on... Giovanni Manghi
05:48 AM Bug report #9902: Using v.voronoi with "output tessellation as graph" returns point result
The reason for this is that the line output is written by GRASS into the 0_ layer and not the 1_ layer that is the on... Giovanni Manghi
05:48 AM Bug report #9902: Using v.voronoi with "output tessellation as graph" returns point result
The reason for this is that the line output is written by GRASS into the 0_ layer and not the 1_ layer that is the on... Giovanni Manghi
04:58 AM Feature request #12806: Write output table in R scripts not supported
Sorry, I don't think it is a duplicate issue. Anyway, I think that the piece of code is here:
https://github.com/qgi...
matteo ghetta
03:33 AM Bug report #12778: Quick field calc bar in attribute table bug
Pull request proposed: https://github.com/qgis/QGIS/pull/2075 Arnaud Morvan

2015-05-24

01:49 AM Bug report #5967 (Closed): Wrong Formula in Raster Terrain Analysis' curvature filter
Fixed in changeset commit:"b7a4e9856b11a1468a3c707c011b3c1becc09a93". Marco Hugentobler
01:25 AM Bug report #12775 (Closed): r.flow had a compulsory parameter that should be optional
Giovanni Manghi
04:29 AM Bug report #12775: r.flow had a compulsory parameter that should be optional
fixed in
https://github.com/qgis/QGIS/pull/2073
Giovanni Manghi
04:29 AM Bug report #12775: r.flow had a compulsory parameter that should be optional
fixed in
https://github.com/qgis/QGIS/pull/2073
Giovanni Manghi
01:25 AM Bug report #12777 (Closed): Processing: Grass 7 r.relief has different "units" parameter than Gra...
Giovanni Manghi
02:42 AM Bug report #12777: Processing: Grass 7 r.relief has different "units" parameter than Grass 6 vers...
Markus Mayr wrote:
> (I mistakenly commented on GitHub - I moved the comment here)
>
> As I understood the descripti...
Giovanni Manghi
11:12 AM Feature request #12820 (Closed): Improve polygon symbol preview
The current polygon symbol previews are cropped to the square border. This is an issue for styles such as the default... Anita Graser
10:57 AM Bug report #12819 (Closed): Fix dialog consistency for effect properties
To ensure GUI consistency, please rearrange the elements of the effect properties dialog to mirror the order in the l... Anita Graser
10:50 AM Bug report #12818: Layer properties dialog displays horizontal scrollbar on min width
Actually, there seems to be no real reason why the dialog has to be that wide. Would be good to figure out why the sc... Anita Graser
10:44 AM Bug report #12818 (Closed): Layer properties dialog displays horizontal scrollbar on min width
The current behavior of the layer properties dialog is not optimal: it can be resized to a width which is a few pixel... Anita Graser
08:53 AM Bug report #12606 (Closed): URL format in request DescribeFeature, && in URL request.
closing for lack of feedback. Giovanni Manghi
08:53 AM Bug report #12606 (Closed): URL format in request DescribeFeature, && in URL request.
closing for lack of feedback. Giovanni Manghi
05:57 AM Bug report #6945 (Open): SAGA vector produced without .prj if the input layer does not have it
Giovanni Manghi
05:42 AM Bug report #7117 (Closed): SAGA Grid Calculator does not work when "Use NoData" is set to "Yes"
Giovanni Manghi
05:40 AM Bug report #5954 (Closed): v.distance does not list existing columns, possibly broken?
Paolo Cavallini wrote:
> I think this can be solved, so better keep it open not to forget about it.
replaced by #12817
Giovanni Manghi
05:39 AM Feature request #12817 (Closed): add v.distance to Processing/GRASS
the tool must be added as a special case because it updates an existing GRASS vector and does not create a new vector... Giovanni Manghi
04:53 AM Bug report #5848: Different icons for QGIS and QGIS Browser
Here's the ico Anita Graser
04:35 AM Bug report #3659 (Closed): Size scale field does not work with symbol levels
Seems fixed now: Size scale field has been removed from the Advanced button and size scaling can now be achieved usin... Anita Graser
04:35 AM Bug report #3659 (Closed): Size scale field does not work with symbol levels
Seems fixed now: Size scale field has been removed from the Advanced button and size scaling can now be achieved usin... Anita Graser
04:35 AM Bug report #3659 (Closed): Size scale field does not work with symbol levels
Seems fixed now: Size scale field has been removed from the Advanced button and size scaling can now be achieved usin... Anita Graser
03:59 AM Bug report #12057: Computed area is wrong when reprojection is active
Stefan Blumentrath wrote:
> The problem is still present in QGIS code revision 2ff6f72 (Installed through OSGeo4W, 32...
Giovanni Manghi
03:51 AM Bug report #12057: Computed area is wrong when reprojection is active
The problem is still present in QGIS code revision 2ff6f72 (Installed through OSGeo4W, 32bit, Win 7).
However, "Ident...
Stefan Blumentrath
03:49 AM Bug report #12734 (Closed): QGis crashes when deleting last vertex of a postgis MultiLineString part
reopen if necessary. Giovanni Manghi
03:49 AM Bug report #12734 (Closed): QGis crashes when deleting last vertex of a postgis MultiLineString part
reopen if necessary. Giovanni Manghi
03:23 AM Bug report #12734: QGis crashes when deleting last vertex of a postgis MultiLineString part
Testing it further on Ubuntu QGis 2.8.2 with fresh PostGis vector layers, I couldn't reproduce the crash...
So it mig...
Christophe Damour
03:49 AM Bug report #12771 (Reopened): error Segmentation fault
Giovanni Manghi
03:02 AM Bug report #12771: error Segmentation fault
This issue should be reopened, because qgsspatialiteprovider.cpp uses the deprecated spatialite_init() method causing... Bas Couwenberg

2015-05-23

09:42 PM Bug report #12816: a number of buttons are oversized under gnome shell's default gtk theme
I should say that I set my toolbar button to 16px.
The proper fix here should probably be for the dockable panel too...
Mathieu Pellerin - nIRV
09:33 PM Bug report #12816 (Closed): a number of buttons are oversized under gnome shell's default gtk theme
After being driven to madness by ubuntu unity's poor window focus management, I've decided to switch to Gnome Shell 3... Mathieu Pellerin - nIRV
11:03 AM Bug report #12747: [OSX] problem with composer grids and frames
Unfortunately I don't think this is something we're able to fix within QGIS itself - it seems to be a quirk with the ... Nyall Dawson
10:42 AM Bug report #12747: [OSX] problem with composer grids and frames
Hi
I also agree that this bug should be considered as blocker. It's very annoying to go to another software to be ab...
Rhenriques Henriques
06:39 AM Bug report #9216 (Closed): The map becomes black when scale is > 1:1600
I can't replicate it anymore. Etienne Trimaille
03:22 AM Bug report #12585 (Closed): Diagrams don't work with Conical Projection
Giovanni Manghi
03:01 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
Arnaud Morvan wrote:
> The geometries are effectively invalid, this is not a bug, split parts makes invalid geometrie...
Roy Roge
02:44 AM Feature request #12815 (Open): Digitizing Remove Fill (or Separate Fill and Line Opacity Options)
Would it be possible to tweak the digitising settings so that the auto-fill of polygons could be optionally removed? ... Rebecca Bennett

2015-05-22

11:58 PM Bug report #3659: Size scale field does not work with symbol levels
Tried to check but these changes are not in OSGeo4W nightly yet. Will check again tomorrow. Anita Graser
12:56 PM Bug report #3659 (Feedback): Size scale field does not work with symbol levels
Anita - is this resolved using vmora's work in latest master? Nyall Dawson
05:36 PM Feature request #12814 (Open): Creation date / last modified of layer in general layer info panel?
I can't find a creation date / last modified on a layer information panel - am I missing something?.
I thought it w...
James Harvey
03:50 PM Bug report #12777: Processing: Grass 7 r.relief has different "units" parameter than Grass 6 vers...
(I mistakenly commented on GitHub - I moved the comment here)
As I understood the description ("With an elevation ma...
Markus Mayr
12:01 PM Bug report #12777: Processing: Grass 7 r.relief has different "units" parameter than Grass 6 vers...
fixed with
https://github.com/qgis/QGIS/pull/2067
Giovanni Manghi
12:01 PM Bug report #12777: Processing: Grass 7 r.relief has different "units" parameter than Grass 6 vers...
fixed with
https://github.com/qgis/QGIS/pull/2067
Giovanni Manghi
01:21 PM Bug report #11765 (Closed): Untranslatable strings from ./src/core/qgscolorscheme.h
Fixed in changeset commit:"df7e07bcf7889c79297eb5ff25ca6244ec71c82b". Nyall Dawson
12:58 PM Bug report #4108 (Closed): Switching from new to old polygon symbology then back again ends up wi...
No longer relevant Nyall Dawson
12:58 PM Bug report #4108 (Closed): Switching from new to old polygon symbology then back again ends up wi...
No longer relevant Nyall Dawson
12:50 PM Bug report #4029 (Closed): diagram: find maximum value with joined field
Not reproducable with current master Nyall Dawson
12:50 PM Bug report #4029 (Closed): diagram: find maximum value with joined field
Not reproducable with current master Nyall Dawson
12:50 PM Bug report #4029 (Closed): diagram: find maximum value with joined field
Not reproducable with current master Nyall Dawson
12:08 PM Bug report #12395 (Closed): Incorrect coordinates in status bar
Fixed in changeset commit:"803a0b9375217671fc625f3156533d693b5d1895". Alexander Bruy
12:02 PM Bug report #5848: Different icons for QGIS and QGIS Browser
We discussed this shortly at the dev meeting. The browser icon should be significantly different to be easily disting... Anita Graser
12:02 PM Bug report #5848: Different icons for QGIS and QGIS Browser
We discussed this shortly at the dev meeting. The browser icon should be significantly different to be easily disting... Anita Graser
11:57 AM Bug report #12774: Attribute table only show first 99 rows from SQL Server views
Jason Moore wrote:
> Attribute table cache. And I haven't found any other data sources that exhibit this behavior. Tr...
Jason Moore
11:55 AM Bug report #12774: Attribute table only show first 99 rows from SQL Server views
Attribute table cache. And I have found any other data sources that exhibit this behavior. Tried shp and dxf. Jason Moore
11:43 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
Ticket created on "GDAL !#5974":https://trac.osgeo.org/gdal/ticket/5974 Arnaud Morvan
10:53 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
The geometries are effectively invalid, this is not a bug, split parts makes invalid geometries, it is a logical cons... Arnaud Morvan
09:03 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
_6 - split one of the two polygons with the split parts tool -> at this point you get an invalid geometry_
At this p...
Arnaud Morvan
07:58 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
I noted that the "split parts" tool is not working properly *also using multipart geometries*:
step to reproduce the...
Roy Roge
06:22 AM Bug report #12799 (Open): QgsFeatureRequest iterator using filterRect (spatial index) lose some f...
The issue here is that the "split parts" tool should not be active/usable to split (main) geometries, that are not "p... Giovanni Manghi
06:22 AM Bug report #12799 (Open): QgsFeatureRequest iterator using filterRect (spatial index) lose some f...
The issue here is that the "split parts" tool should not be active/usable to split (main) geometries, that are not "p... Giovanni Manghi
06:22 AM Bug report #12799 (Open): QgsFeatureRequest iterator using filterRect (spatial index) lose some f...
The issue here is that the "split parts" tool should not be active/usable to split (main) geometries, that are not "p... Giovanni Manghi
06:22 AM Bug report #12799 (Open): QgsFeatureRequest iterator using filterRect (spatial index) lose some f...
The issue here is that the "split parts" tool should not be active/usable to split (main) geometries, that are not "p... Giovanni Manghi
06:22 AM Bug report #12799 (Open): QgsFeatureRequest iterator using filterRect (spatial index) lose some f...
The issue here is that the "split parts" tool should not be active/usable to split (main) geometries, that are not "p... Giovanni Manghi
10:59 AM Bug report #12812 (Closed): Number_of_unique_values_in_classes.py has disappeared
Fixed commit:e25fb2d Paolo Cavallini
10:59 AM Bug report #12812 (Closed): Number_of_unique_values_in_classes.py has disappeared
Fixed commit:e25fb2d Paolo Cavallini
10:14 AM Bug report #12812: Number_of_unique_values_in_classes.py has disappeared
Mine was displaying well.
I've tried to update it, but impossible to update this script (and only this one), error me...
Arnaud Morvan
09:36 AM Bug report #12812 (Closed): Number_of_unique_values_in_classes.py has disappeared
One module has disappeared from the interface:
qgis/scripts/Number_of_unique_values_in_classes.py
The file is there...
Paolo Cavallini
10:37 AM Bug report #12813 (Feedback): Node tool on PostGIS table with null geometry causes crash
could you please qgis master and report back? Giovanni Manghi
10:37 AM Bug report #12813 (Feedback): Node tool on PostGIS table with null geometry causes crash
could you please qgis master and report back? Giovanni Manghi
10:29 AM Bug report #12813 (Closed): Node tool on PostGIS table with null geometry causes crash
Hi,
When using the node tool to edit features from a PostGIS table, I was getting an 'Unknown Exception' error whene...
Simon Casley
10:25 AM Feature request #12324: QGIS 2.8 Wien - Crashed on SQL Server Spatial Layers
what is the status of this issue? Giovanni Manghi
10:24 AM Feature request #12811 (Open): Generate Mailing Labels
Giovanni Manghi
10:16 AM Feature request #12811: Generate Mailing Labels

> Am I taking this the wrong way?
yes :) but of course we are just discussing, I wasn't slamming the door.

Propri...
Giovanni Manghi
09:58 AM Feature request #12811: Generate Mailing Labels
Giovanni Manghi wrote:
> my opinion is that this task would best fit a plugin rather than a core functionality (is a ...
Keith Kie
09:42 AM Feature request #12811 (Feedback): Generate Mailing Labels
my opinion is that this task would best fit a plugin rather than a core functionality (is a very specific requirement... Giovanni Manghi
09:06 AM Feature request #12811 (Open): Generate Mailing Labels
Hello QGIS community! This is my first post on here so my apologies for its roughness. I tried a search for "mailing ... Keith Kie
10:03 AM Bug report #12734: QGis crashes when deleting last vertex of a postgis MultiLineString part
Christophe Damour wrote:
> Giving it another try, I can only reproduce it when I delete the last vertex +of the last ...
Giovanni Manghi
09:58 AM Bug report #10080 (Closed): Model does not show up in toolbox due to erroneous "Error in algorith...
Giovanni Manghi
09:55 AM Bug report #12060 (Closed): WFS: missing fields when using GetFeature on a layer with a join
it works fine in master. Thanks! Giovanni Manghi
09:55 AM Bug report #12060 (Closed): WFS: missing fields when using GetFeature on a layer with a join
it works fine in master. Thanks! Giovanni Manghi
08:40 AM Bug report #12801: Processing: "Join attributes table" doesn't work in batch mode
Pull request proposed: https://github.com/qgis/QGIS/pull/2065 Arnaud Morvan
02:00 AM Bug report #12801: Processing: "Join attributes table" doesn't work in batch mode
I attach the shapefiles so you can reproduce the error. Joana Marcelino
07:49 AM Bug report #12809 (Closed): Add New Script from File has Python Error
Giovanni Manghi
07:14 AM Bug report #12809: Add New Script from File has Python Error
this was fixed in commit:4d62566db702843f78154e76d0d3bc3e65c8556c Victor Olaya
06:30 AM Bug report #12809: Add New Script from File has Python Error
Removed "processing" folder from stated location and all is good, thanks. Lucy Arnold
05:28 AM Bug report #12809: Add New Script from File has Python Error
I confirm the issue on qgis master.
you can probably get rid of the issue my not upgrading the processing plugin or ...
Giovanni Manghi
05:28 AM Bug report #12809: Add New Script from File has Python Error
I confirm the issue on qgis master.
you can probably get rid of the issue my not upgrading the processing plugin or ...
Giovanni Manghi
05:28 AM Bug report #12809: Add New Script from File has Python Error
I confirm the issue on qgis master.
you can probably get rid of the issue my not upgrading the processing plugin or ...
Giovanni Manghi
05:28 AM Bug report #12809: Add New Script from File has Python Error
I confirm the issue on qgis master.
you can probably get rid of the issue my not upgrading the processing plugin or ...
Giovanni Manghi
05:28 AM Bug report #12809: Add New Script from File has Python Error
I confirm the issue on qgis master.
you can probably get rid of the issue my not upgrading the processing plugin or ...
Giovanni Manghi
05:08 AM Bug report #12809 (Closed): Add New Script from File has Python Error
Downloaded 2.8.2 and swapped for 2.8.1. Tried to add in a script from file and get the following error in a python er... Lucy Arnold
07:13 AM Bug report #12808: Select by location doesn't work when 'Use selected features only' checkbox is ...
You are correct, the tool is working as intended. My bug report was based on a misconception of the "use only selecte... Kilian Steinkohl
05:10 AM Bug report #12808: Select by location doesn't work when 'Use selected features only' checkbox is ...

> However the behavior you describe with the progress bar moving from side to side, can be triggered by enabling "us...
Giovanni Manghi
05:10 AM Bug report #12808: Select by location doesn't work when 'Use selected features only' checkbox is ...

> However the behavior you describe with the progress bar moving from side to side, can be triggered by enabling "us...
Giovanni Manghi
05:10 AM Bug report #12808: Select by location doesn't work when 'Use selected features only' checkbox is ...

> However the behavior you describe with the progress bar moving from side to side, can be triggered by enabling "us...
Giovanni Manghi
04:41 AM Bug report #12808: Select by location doesn't work when 'Use selected features only' checkbox is ...
I am not able to reproduce this on 2.9.0
However the behavior you describe with the progress bar moving from side to ...
Jakob Hvitnov
03:54 AM Bug report #12808 (Closed): Select by location doesn't work when 'Use selected features only' che...
When using 'Select by location' with 'Use selected features only' checked, the results are not as expected.
When tryi...
Kilian Steinkohl
07:06 AM Feature request #12810: 'Default setting of data-link-paths on program-level instead /in addition...
Please update description to 'Default setting of data-link-paths on program-level instead /in addition of on a projec... Filip Mahieu
07:04 AM Feature request #12810 (Open): 'Default setting of data-link-paths on program-level instead /in a...
In 'Project - properties - General - 'Save path'' one can choose 'relative' or 'absolute'. Default always 'relative' ... Filip Mahieu
06:56 AM Feature request #12788: Absolute path to images in composer
I found a solution: see http://gis.stackexchange.com/questions/90612/how-to-save-qgis-composer-template-with-image-e-... Filip Mahieu
06:37 AM Feature request #9890 (Open): Show "Nearest neighbor analysis" in results viewer when running fro...
Giovanni Manghi
06:35 AM Bug report #12682 (Closed): Deleting Features from Shapefiles on Network Drives
closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
06:35 AM Bug report #12682 (Closed): Deleting Features from Shapefiles on Network Drives
closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
06:30 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Confirm, that the missing legend-grafic in wms seems to lead to freeze QGIS, when a legend-element is in a composer.
...
Gerhard Spieles
03:04 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Gerhard Spieles wrote:
> Tested the problem with a newly creates Project in 2.90, rev. e8587c3.
> If a legend elemet ...
Giovanni Manghi
05:57 AM Bug report #12428 (Closed): GPX export format forced extensions incompatibility
closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
05:57 AM Bug report #12428 (Closed): GPX export format forced extensions incompatibility
closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
05:51 AM Bug report #11834 (Closed): qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>...
closing for lack of feedback. Giovanni Manghi
05:50 AM Bug report #8919: R scripts: not possible to export .csv
see also #12806 Giovanni Manghi
05:50 AM Feature request #12806 (Closed): Write output table in R scripts not supported
duplicate of #8919 Giovanni Manghi
05:50 AM Feature request #12806 (Closed): Write output table in R scripts not supported
duplicate of #8919 Giovanni Manghi
05:24 AM Feature request #12806: Write output table in R scripts not supported
Alexander, OutputTable is available but doesn't work.
This is a duplicate of #8919
There are plenty of ways of cre...
Filipe Dias
03:18 AM Feature request #12806: Write output table in R scripts not supported
Yes, you can specify table as output, but no csv (or other table file format) appear in the legend. With the followin... matteo ghetta
03:01 AM Feature request #12806 (Rejected): Write output table in R scripts not supported
OutputTable already available in R scripts with "##myoutput = output table" Alexander Bruy
03:01 AM Feature request #12806 (Rejected): Write output table in R scripts not supported
OutputTable already available in R scripts with "##myoutput = output table" Alexander Bruy
05:49 AM Bug report #12713 (Open): when columns have the same name, styling with the first one does not work
Giovanni Manghi
05:17 AM Bug report #12290 (Closed): proxy settings only works one time, and then QGIS "forgets" the settings
Not reproducable in 2.8.2 and master. Saber Razmjooei
05:15 AM Bug report #11145 (Closed): Large format export/printing (with transparencies and blending modes)...
Bernd Eversmann wrote:
> Unfortunately I don't have access to a Win32 machine with QGIS at the moment. Can anyone els...
Giovanni Manghi
05:15 AM Bug report #11145 (Closed): Large format export/printing (with transparencies and blending modes)...
Bernd Eversmann wrote:
> Unfortunately I don't have access to a Win32 machine with QGIS at the moment. Can anyone els...
Giovanni Manghi
05:13 AM Feature request #11491 (Open): When using data defined colors the map legend shows always a blac...
Giovanni Manghi
05:12 AM Bug report #9706 (Feedback): marker symbol not centered
Slightly better in 2.8.2 but still not right in centre.
Saber Razmjooei
05:12 AM Bug report #9706 (Feedback): marker symbol not centered
Slightly better in 2.8.2 but still not right in centre.
Saber Razmjooei
04:57 AM Bug report #9735 (Closed): Raster resampling bilinear produces unexpected results
closing for lack of feedback. Please reopen if necessary, possibly attaching sample data. Thanks! Giovanni Manghi
04:57 AM Bug report #9735 (Closed): Raster resampling bilinear produces unexpected results
closing for lack of feedback. Please reopen if necessary, possibly attaching sample data. Thanks! Giovanni Manghi
04:47 AM Bug report #12415 (Closed): Geoprocessing tools not working
closing for lack of feedback. I also asked to test on OsX and it seems to works fine on the latest qgis releases. Giovanni Manghi
04:47 AM Bug report #12415 (Closed): Geoprocessing tools not working
closing for lack of feedback. I also asked to test on OsX and it seems to works fine on the latest qgis releases. Giovanni Manghi
04:44 AM Bug report #10558 (Closed): Unexpected interactions between labelling and diagrams
seems fixed in the latest master, reopen if necessary. Giovanni Manghi
04:44 AM Bug report #10558 (Closed): Unexpected interactions between labelling and diagrams
seems fixed in the latest master, reopen if necessary. Giovanni Manghi
04:40 AM Bug report #12514 (Open): Getting weird lines in Print Composer
Giovanni Manghi
04:34 AM Bug report #12301 (Closed): Identify tool and highlighting behaviour
Mart Reinola wrote:
> Before i didnt have to close dialogs, now i do. That means extra clicks. So, in that aspect, th...
Giovanni Manghi
04:34 AM Bug report #12301 (Closed): Identify tool and highlighting behaviour
Mart Reinola wrote:
> Before i didnt have to close dialogs, now i do. That means extra clicks. So, in that aspect, th...
Giovanni Manghi
03:13 AM Bug report #12057: Computed area is wrong when reprojection is active
Stefan Blumentrath wrote:
> I can second that it is not fixed on OSGeo4W (QGIS e8587c3) on Win 7.
this build does no...
Giovanni Manghi
02:41 AM Bug report #12057: Computed area is wrong when reprojection is active
I can second that it is not fixed on OSGeo4W (QGIS e8587c3) on Win 7.
I created a regular grid in two different CRS ...
Stefan Blumentrath
02:30 AM Bug report #12807 (Closed): ParameterTableField : can't see all the fields which contains an integer
In my own GeoAlgorithm, I have a ParameterTableField with datatype=0 (DATA_TYPE_NUMBER).
However, I can't see all the...
Etienne Trimaille
02:09 AM Bug report #11460 (Closed): qgis crashes when trying to load hotkeys settings
I close the ticket, but feel free to open if you still experience the same problem. Saber Razmjooei
02:05 AM Bug report #11460: qgis crashes when trying to load hotkeys settings
qgis 2.8.1
still have same problem
but i did some test on virtual machine, clean windows 7, clean istall of qgis and ...
zimirrr leonid
02:05 AM Bug report #11460: qgis crashes when trying to load hotkeys settings
qgis 2.8.1
still have same problem
but i did some test on virtual machine, clean windows 7, clean istall of qgis and ...
zimirrr leonid

2015-05-21

01:55 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Tested the problem with a newly creates Project in 2.90, rev. e8587c3.
If a legend elemet is added to any composer in...
Gerhard Spieles
04:19 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Hi Giovanni,
when you add a legend in composer again, the poblem is back again.
The issue schould be solved in 2.10.
...
Gerhard Spieles
01:47 AM Bug report #12719 (Open): QGIS crashes when 'Hide deprecated' enabled from Select datum transform...
I confirm is still crashes on master. Giovanni Manghi
01:44 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
Crash dump was too big too attach - I still have it if required. Info from Event Viewer:
Faulting application name: ...
Steve Pritchard
01:43 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
I've downloaded and installed 2.8.2. I followed the same steps as before and QGIS STILL CRASHED.
I had previously ad...
Steve Pritchard
04:06 AM Bug report #12719 (Feedback): QGIS crashes when 'Hide deprecated' enabled from Select datum trans...
I can't reproduce in 2.8.2
Could you try and report back?
Saber Razmjooei
01:42 AM Bug report #12057 (Reopened): Computed area is wrong when reprojection is active
Martin Dobias wrote:
> The problem is most likely the same as #12406 - please try again with the latest master.
sorr...
Giovanni Manghi
01:42 AM Bug report #12057 (Reopened): Computed area is wrong when reprojection is active
Martin Dobias wrote:
> The problem is most likely the same as #12406 - please try again with the latest master.
sorr...
Giovanni Manghi
01:25 AM Bug report #12057 (Closed): Computed area is wrong when reprojection is active
fixed in master. Giovanni Manghi
01:25 AM Bug report #12057 (Closed): Computed area is wrong when reprojection is active
fixed in master. Giovanni Manghi
04:56 AM Bug report #12057 (Feedback): Computed area is wrong when reprojection is active
The problem is most likely the same as #12406 - please try again with the latest master. Martin Dobias
01:31 AM Bug report #12804 (Feedback): The Label Option: FirstCap return always " all uppercase"

> Infact the FirstCap, dont mean put the first Upper and leave the other unchanged.
> But instead mean Put only the ...
Giovanni Manghi
01:10 AM Bug report #12804 (Reopened): The Label Option: FirstCap return always " all uppercase"
No, it is not a duplicate of other ticket.
In the ther ticket it was proposed a workaround at program level .
This ...
aperi2007 -
11:16 PM Bug report #12804 (Closed): The Label Option: FirstCap return always " all uppercase"
duplicate of #7611 Giovanni Manghi
11:16 PM Bug report #12804 (Closed): The Label Option: FirstCap return always " all uppercase"
duplicate of #7611 Giovanni Manghi
01:40 PM Bug report #12804 (Closed): The Label Option: FirstCap return always " all uppercase"
As in subject:
the label option "FirstCap" return a label always ALL-Uppercase.
Instead it should return Upper the f...
aperi2007 -
01:27 AM Bug report #11784 (Closed): Measure Line behaviour when "On the fly" enabled
closing for lack of feedback. Giovanni Manghi
01:27 AM Bug report #11784 (Closed): Measure Line behaviour when "On the fly" enabled
closing for lack of feedback. Giovanni Manghi
01:03 AM Bug report #9782 (Closed): Processing: model builder misses close and maximize buttons on Gnome3
just checked on G3, and it seems ok. Giovanni Manghi
01:03 AM Bug report #9782 (Closed): Processing: model builder misses close and maximize buttons on Gnome3
just checked on G3, and it seems ok. Giovanni Manghi
01:00 AM Bug report #10238 (Closed): SAGA algorithms doesn't work in Modeler QGIS 2.2
closing for lack of feedback. Giovanni Manghi
01:00 AM Bug report #10238 (Closed): SAGA algorithms doesn't work in Modeler QGIS 2.2
closing for lack of feedback. Giovanni Manghi
12:57 AM Bug report #11374 (Open): Error while launching a model from the modeler
Giovanni Manghi
12:54 AM Bug report #11374: Error while launching a model from the modeler
Yes, this still true.
Processing version : 2.9.99
QGis 2.8.2 and qgis master
Etienne Trimaille
12:21 AM Bug report #11374 (Feedback): Error while launching a model from the modeler
Still true? Paolo Cavallini
12:56 AM Bug report #11631 (Closed): field calculator update is very slow
closing for lack of feedback. Giovanni Manghi
12:56 AM Bug report #11631 (Closed): field calculator update is very slow
closing for lack of feedback. Giovanni Manghi
12:55 AM Bug report #11071 (Closed): SQL injection on PostGIS layer filtering
closing for lack of feedback. Giovanni Manghi
12:55 AM Bug report #11071 (Closed): SQL injection on PostGIS layer filtering
closing for lack of feedback. Giovanni Manghi
12:54 AM Feature request #12806 (Closed): Write output table in R scripts not supported
With an R script one can specify the ##name=output vector or ##name=output raster parameters.
It would be nice to hav...
matteo ghetta
12:53 AM Bug report #5954 (Feedback): v.distance does not list existing columns, possibly broken?
I think this can be solved, so better keep it open not to forget about it. Paolo Cavallini
12:51 AM Bug report #5954 (Closed): v.distance does not list existing columns, possibly broken?
v.distance has been removed because it can't be used in Processing, unless it will be added as a special case (it upd... Giovanni Manghi
12:51 AM Bug report #5954 (Closed): v.distance does not list existing columns, possibly broken?
v.distance has been removed because it can't be used in Processing, unless it will be added as a special case (it upd... Giovanni Manghi
12:47 AM Bug report #12764 (Closed): Processing: GRASS r.quantiles produce an empty output
duplicate of #6379 Giovanni Manghi
12:47 AM Bug report #12764 (Closed): Processing: GRASS r.quantiles produce an empty output
duplicate of #6379 Giovanni Manghi
12:47 AM Bug report #6379 (Open): HTML output does not work for Processing/GRASS modules
Still empty result on master, see also #12764 Giovanni Manghi
12:47 AM Bug report #6379 (Open): HTML output does not work for Processing/GRASS modules
Still empty result on master, see also #12764 Giovanni Manghi
12:47 AM Bug report #6379 (Open): HTML output does not work for Processing/GRASS modules
Still empty result on master, see also #12764 Giovanni Manghi
12:42 AM Feature request #8778 (Closed): Drop-down list as input parameter
Fixed with commit:a58085b matteo ghetta
12:40 AM Feature request #10806 (Open): Attribute table: add option to allow only "correct" name of the he...
Giovanni Manghi
12:39 AM Bug report #7194 (Closed): Print layout: tab partially shown
seems fixed to me even at 1024x768. Giovanni Manghi
12:39 AM Bug report #7194 (Closed): Print layout: tab partially shown
seems fixed to me even at 1024x768. Giovanni Manghi
12:34 AM Bug report #10815 (Open): refine rules (add ranges/categories): expressions not applied/written c...
Giovanni Manghi
12:29 AM Feature request #12357 (Feedback): Vectors : Line - Poligon - Point - Some interactive operations...
Some of the features already exist in 2.8.2 with the integration of some of CAD Tools functions. Saber Razmjooei
12:29 AM Feature request #12357 (Feedback): Vectors : Line - Poligon - Point - Some interactive operations...
Some of the features already exist in 2.8.2 with the integration of some of CAD Tools functions. Saber Razmjooei
12:22 AM Feature request #5446: Select group from existing groups
Agreed, it would be useful. Paolo Cavallini
12:20 AM Bug report #4404 (Open): NZMG and other NZGD49 based CRSs are wrong
Giovanni Manghi
12:20 AM Feature request #6885 (Feedback): Modeler - retain parameter values when editing
Still true? Paolo Cavallini
12:19 AM Bug report #7327 (Open): dxf export drops elevation data
seems still valid. Giovanni Manghi
12:10 AM Bug report #11087 (Closed): Modeler, help from QGIS 2.2 don't work in QGIS 2.4
I think we can close this, as nobody is going to fix it. Paolo Cavallini
12:10 AM Bug report #11087 (Closed): Modeler, help from QGIS 2.2 don't work in QGIS 2.4
I think we can close this, as nobody is going to fix it. Paolo Cavallini
12:04 AM Bug report #11433 (Closed): Processing: Help editor does not save the text
Fixed, merci Arnaud! Paolo Cavallini
12:04 AM Bug report #11433 (Closed): Processing: Help editor does not save the text
Fixed, merci Arnaud! Paolo Cavallini
08:35 AM Bug report #11433: Processing: Help editor does not save the text
Pull request proposed: https://github.com/qgis/QGIS/pull/2058 Arnaud Morvan
08:02 AM Bug report #11433: Processing: Help editor does not save the text
I notice that, for the script case, if script help file already exist, help content is written to file on help dialog... Arnaud Morvan
07:47 AM Bug report #11433: Processing: Help editor does not save the text
Actually in master help edition dialog work on a copy of the algorithm.
https://github.com/qgis/QGIS/blob/master/pyth...
Arnaud Morvan
11:59 PM Bug report #9829 (Closed): Copy paste from one layer (anyformat) to another (shape) kills attribu...
just tested and works as expected on the latest master. Giovanni Manghi
11:59 PM Bug report #9829 (Closed): Copy paste from one layer (anyformat) to another (shape) kills attribu...
just tested and works as expected on the latest master. Giovanni Manghi
11:45 PM Bug report #10526 (Open): Label: line geometry labels drawn to wrong location when CRS transformed
Giovanni Manghi
11:27 PM Bug report #12423 (Feedback): Processing - Bar Plot (QGIS) doesn't plot string "category name field"
Giovanni Manghi
11:19 PM Bug report #12423: Processing - Bar Plot (QGIS) doesn't plot string "category name field"
How you can draw plot when both fields (mean and stddev, name and value) contains strings or dates? Alexander Bruy
11:26 PM Bug report #12774 (Feedback): Attribute table only show first 99 rows from SQL Server views
Jason Moore wrote:
> Found that views return all rows if the setting Options->Data Sources->Attribute table row cache...
Giovanni Manghi
08:54 AM Bug report #12774: Attribute table only show first 99 rows from SQL Server views
Found that views return all rows if the setting Options->Data Sources->Attribute table row cache is set to anything b... Jason Moore
11:17 PM Bug report #7724 (Closed): Label type cases do not alter output if label text is upper case
duplicate of #7611 Giovanni Manghi
11:17 PM Bug report #7724 (Closed): Label type cases do not alter output if label text is upper case
duplicate of #7611 Giovanni Manghi
11:00 PM Bug report #12805 (Closed): Print Composer Grid MacOSX
duplicate of #12747 Giovanni Manghi
11:00 PM Bug report #12805 (Closed): Print Composer Grid MacOSX
duplicate of #12747 Giovanni Manghi
11:00 PM Bug report #12805 (Closed): Print Composer Grid MacOSX
duplicate of #12747 Giovanni Manghi
05:05 PM Bug report #12805 (Closed): Print Composer Grid MacOSX
Print composer still does not show draw coordinates outside a map frame in print composer.
This is an annoying bug t...
Rhenriques Henriques
10:58 PM Feature request #12803 (Closed): Renaming ability for SHP (and others?)
duplicate of #4739 Giovanni Manghi
10:58 PM Feature request #12803 (Closed): Renaming ability for SHP (and others?)
duplicate of #4739 Giovanni Manghi
01:13 PM Feature request #12803 (Closed): Renaming ability for SHP (and others?)
Currently there is no way to rename a shapefile other than code within QGIS or any other open source application.
Ta...
Matthew Baker
12:01 PM Bug report #10560 (Reopened): Wrong feature count after edit
I tested it in 2.8.2. The bug still exists.
I paste a couple of copied features into the layer. The count changes fro...
Steve Lowman
07:10 AM Bug report #10560 (Closed): Wrong feature count after edit
Works fine in 2.8.2. Saber Razmjooei
09:04 AM Bug report #12752 (Closed): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
gdal still crashing on linux
[email protected]:~/Desktop > gdalinfo snfl_2014093012_to_2015050112.nc
Warning 1: No...
Giovanni Manghi
09:04 AM Bug report #12752 (Closed): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
gdal still crashing on linux
[email protected]:~/Desktop > gdalinfo snfl_2014093012_to_2015050112.nc
Warning 1: No...
Giovanni Manghi
08:56 AM Bug report #12802 (Closed): invisible topology
The topology "city_data" as created by PostGIS topology regression test cannot be showed anymore by TopoViewer plugin... Sandro Santilli
08:53 AM Bug report #12770: shapefile gets corrupted after editing
are you doing concurrent editions of this shapes? are you manually editing the shapefile with a program like libre/ms... Giovanni Manghi
08:53 AM Bug report #12770: shapefile gets corrupted after editing
are you doing concurrent editions of this shapes? are you manually editing the shapefile with a program like libre/ms... Giovanni Manghi
08:51 AM Bug report #12778: Quick field calc bar in attribute table bug
it affects also linux, and I raise the prioprity as it corrupts the data. Anyway is not a regression, seems that has ... Giovanni Manghi
08:51 AM Bug report #12778: Quick field calc bar in attribute table bug
it affects also linux, and I raise the prioprity as it corrupts the data. Anyway is not a regression, seems that has ... Giovanni Manghi
08:51 AM Bug report #12778: Quick field calc bar in attribute table bug
it affects also linux, and I raise the prioprity as it corrupts the data. Anyway is not a regression, seems that has ... Giovanni Manghi
08:51 AM Bug report #12778: Quick field calc bar in attribute table bug
it affects also linux, and I raise the prioprity as it corrupts the data. Anyway is not a regression, seems that has ... Giovanni Manghi
08:46 AM Bug report #11460 (Feedback): qgis crashes when trying to load hotkeys settings
Can't reproduce that in 2.8.2
Could you test and report back?
Saber Razmjooei
08:43 AM Bug report #12735 (Closed): Qgis cannot read PRJ file of DXF and PDF
just had a chat with others here at the developer meeting and, as I supposed, is wrong to assume that you can simply ... Giovanni Manghi
08:43 AM Bug report #12735 (Closed): Qgis cannot read PRJ file of DXF and PDF
just had a chat with others here at the developer meeting and, as I supposed, is wrong to assume that you can simply ... Giovanni Manghi
08:41 AM Bug report #12801 (Closed): Processing: "Join attributes table" doesn't work in batch mode
Load four shapefiles (eg s1,s2, s3 and s4)
Run join attributes table as a batch process
Set up: Join s2 to s1 and s...
Filipe Dias
07:05 AM Bug report #12800 (Closed): Copy/paste a command line from the Processing history into the python...
Copy/paste a command line from the Processing history into the python console doesn't work if you have are using a la... Etienne Trimaille
05:45 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
It is the result of the "split parts", can you select the feature clicking in the upper "half" rectangle?
i can not...
Roy Roge
05:30 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
I can't reproduce with your file. It is a multipart polygon. Is that result of the split or is the original file? Saber Razmjooei
05:18 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...
I'm using QGIS 2.8.2 64bit on windows.
Step to reproduce:
# Create a new polygon shapefile
# draw a rectangle
# cut ...
Roy Roge
04:10 AM Bug report #12799 (Feedback): QgsFeatureRequest iterator using filterRect (spatial index) lose so...
Tried in 2.8.2 and get proper results. Could you confirm QGIS version?
A sample data will help too.
Saber Razmjooei
04:10 AM Bug report #12799 (Feedback): QgsFeatureRequest iterator using filterRect (spatial index) lose so...
Tried in 2.8.2 and get proper results. Could you confirm QGIS version?
A sample data will help too.
Saber Razmjooei
04:03 AM Bug report #12799 (Closed): QgsFeatureRequest iterator using filterRect (spatial index) lose some...
*new description:*
#12799-9
*old:*
Draw a polygon and use the "Split parts" advanced digitizing tool on it.
S...
Roy Roge
05:45 AM Bug report #12730: "Check Geometry Validity" produces incorrect result
That's interesting. Is the intent of the "QGIS Method" to validate against a different set of rules than GEOS / OGC? Daniel Baston
05:34 AM Bug report #12406: QgsDistanceArea.measure(geometry) - for Polygons in WGS84
Backported to 2.8 in commit:1949fe9c86215e7818c9b21e14c80d4e417c2d7a Martin Dobias
04:52 AM Bug report #12406 (Closed): QgsDistanceArea.measure(geometry) - for Polygons in WGS84
Fixed in changeset commit:"19c1dc69e9ff09cbb4323cb73a64c7cd805dc63f". Martin Dobias
04:58 AM Bug report #12256 (Feedback): Removing WFS layer from TOC crashes QGIS
I tried to save one of the layers as spatialite. But it came up with an error:
@Export to vector file failed.
Error: ...
Saber Razmjooei
03:00 AM Bug report #12595 (Closed): Sample R scripts for Processing (Point pattern analysis) should accep...
Fixed in master, corresponding scripts (they now in the online repository) also updated Alexander Bruy
03:00 AM Bug report #12595 (Closed): Sample R scripts for Processing (Point pattern analysis) should accep...
Fixed in master, corresponding scripts (they now in the online repository) also updated Alexander Bruy
02:54 AM Bug report #12798 (Closed): v.generalize in Processing: wrong output projection
duplicate of #11884 Giovanni Manghi
02:53 AM Bug report #12798 (Feedback): v.generalize in Processing: wrong output projection
Probably a duplicate of #5702 Paolo Cavallini
02:53 AM Bug report #12798 (Feedback): v.generalize in Processing: wrong output projection
Probably a duplicate of #5702 Paolo Cavallini
02:43 AM Bug report #12798 (Closed): v.generalize in Processing: wrong output projection
On 19/10/2014
Paolo Cavallini Reported this bug in qgis developer mailing list
From 19/10/2014 to 20/10/2014
Both Pa...
Jack Attack
02:38 AM Bug report #8557: Untranslatable strings in Processing
In my install, Run, Close, Advanced interface and similar are still untranslated; unsure whether they are missing fro... Paolo Cavallini
02:31 AM Bug report #12797 (Closed): Layer not shown if Proportional size AND symbol levels are activated
Tested with points and lines, in master and 2.8.2.
When using advanced fields for proportionnal size display of cate...
Regis Haubourg
02:28 AM Bug report #4584 (Open): Make projection info consistent
Not fully: see e.g. the create new spatialite layer dialog. Paolo Cavallini
02:14 AM Bug report #12796: Export Spatialite point layer to CSV fails on Geometry AS_XY
Confirmed also in master but not in 2.6.1.

It is a regression bug and marked as blocker.
Saber Razmjooei
02:14 AM Bug report #12796: Export Spatialite point layer to CSV fails on Geometry AS_XY
Confirmed also in master but not in 2.6.1.

It is a regression bug and marked as blocker.
Saber Razmjooei
02:14 AM Bug report #12796: Export Spatialite point layer to CSV fails on Geometry AS_XY
Confirmed also in master but not in 2.6.1.

It is a regression bug and marked as blocker.
Saber Razmjooei
02:02 AM Bug report #12796 (Closed): Export Spatialite point layer to CSV fails on Geometry AS_XY
When exporting a Spatialite point layer via "Save as...", geometry is only exported when selecting "AS_WKT". When sel... Jochen Huber
02:03 AM Bug report #9777 (Closed): Simplification of polygons may return invalid polygons
Tried in 2.8.2 and can't reproduce. Saber Razmjooei
02:03 AM Bug report #9777 (Closed): Simplification of polygons may return invalid polygons
Tried in 2.8.2 and can't reproduce. Saber Razmjooei

2015-05-20

01:43 AM Bug report #12795 (Closed): Georeferencer generates incorrect GDAL script when input file is JPG
*Problem:*
When georeferencing a _JPEG_ image QGIS return telling the transformation could not be made.
*Why:*
Accor...
Casper Børgesen
01:38 AM Bug report #12579: Qgis crashes when trying to use geoprocessing tools
Not reproducible here with master and 2.8 Alexander Bruy
01:36 AM Bug report #12730 (Feedback): "Check Geometry Validity" produces incorrect result
Arnaud Morvan wrote:
> GEOS method returns that the polygon is valid.
shoud we close this then?
Giovanni Manghi
01:36 AM Bug report #12730 (Feedback): "Check Geometry Validity" produces incorrect result
Arnaud Morvan wrote:
> GEOS method returns that the polygon is valid.
shoud we close this then?
Giovanni Manghi
10:16 AM Bug report #12730: "Check Geometry Validity" produces incorrect result
The two parts of the polygon have one point in common.
In Settings/Options/Digitizing/Feature creation, there is two ...
Arnaud Morvan
01:29 AM Bug report #4584 (Feedback): Make projection info consistent
Seems fixed now with new projection selector widget Alexander Bruy
01:28 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
all versions are affected gontran casella
01:24 AM Bug report #12785 (Open): Adding spatialite layer to project data gets corrupted(?)
Giovanni Manghi
10:21 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
a question:
My problem you play on your computer or server?
gontran casella
10:12 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
can be, but this happens on own base QSLITE I carry directly with the function add a layer startialite gontran casella
10:03 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
gontran casella wrote:
> The same problem arises when inserting a layer qspartialite
if the issue is about the "qspa...
Giovanni Manghi
09:48 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
The same problem arises when inserting a layer qspartialite
gontran casella
08:51 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
isn't this about a 3rd party plugin? Giovanni Manghi
08:32 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
the plots are good, that is the data paths (identifiant_EVV) is false gontran casella
08:25 AM Bug report #12785 (Feedback): Adding spatialite layer to project data gets corrupted(?)
Are you sure the CRS is set correctly? Saber Razmjooei
08:20 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
this is not an error but rather a data transformation
!test_qgis.bmp!
gontran casella
08:00 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
Could you copy some of the error messages you get from QGIS log message.
Also could you run ogrinfo on the master fil...
Saber Razmjooei
08:00 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
Could you copy some of the error messages you get from QGIS log message.
Also could you run ogrinfo on the master fil...
Saber Razmjooei
07:23 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
this is not the troubleshooting, data (1 GB). This is an extraction(mydraaf.sqlite).
The problem is that the informat...
gontran casella
07:04 AM Bug report #12785: Adding spatialite layer to project data gets corrupted(?)
Something wrong with your table. Here is ogrinfo output:
@ERROR 1: Unable to query table draaf082014 for column defin...
Saber Razmjooei
04:56 AM Bug report #12785 (Closed): Adding spatialite layer to project data gets corrupted(?)
*New description:*
--------------
Take the attached SL database, examine the "test" table with DB Manager, it has a ...
gontran casella
01:27 AM Bug report #5073 (Feedback): Empty space in Raster property window
Still valid? Alexander Bruy
01:23 AM Bug report #8557: Untranslatable strings in Processing
Still valid? Alexander Bruy
01:21 AM Bug report #11494 (Closed): Convex Hull - QProgressBar.setRange(int, int): argument 2 has unexpec...
Not reproducible with fTools and Processing Alexander Bruy
01:21 AM Bug report #11494 (Closed): Convex Hull - QProgressBar.setRange(int, int): argument 2 has unexpec...
Not reproducible with fTools and Processing Alexander Bruy
01:02 AM Bug report #12792 (Closed): Labels rendered multiple times with curved placement
Fixed in changeset commit:"7d97ab50fcdafb559d4d603a966ed7b606a95d79". Nyall Dawson
11:53 PM Bug report #12792: Labels rendered multiple times with curved placement
confirmed here on master. Giovanni Manghi
09:04 PM Bug report #12792 (Closed): Labels rendered multiple times with curved placement
Labels are rendered multiple times, with start position moved about 0.5mm, when on Label Placement: Curved, 'on line'... Tomasz Nycz
01:01 AM Feature request #12753 (Closed): Keep topology when simplifying polygons
Simplification/generalization maintain topology for adjacent polygons is a complex operation that in QGIS you can do ... Giovanni Manghi
01:01 AM Feature request #12753 (Closed): Keep topology when simplifying polygons
Simplification/generalization maintain topology for adjacent polygons is a complex operation that in QGIS you can do ... Giovanni Manghi
12:58 AM Bug report #12760 (Closed): Qgis 2.8, gdal python scripts gives error at end of process
there are indeed issues with gdal lately (I have seen then also on linux), but this is not caused by qgis. Giovanni Manghi
12:58 AM Bug report #12760 (Closed): Qgis 2.8, gdal python scripts gives error at end of process
there are indeed issues with gdal lately (I have seen then also on linux), but this is not caused by qgis. Giovanni Manghi
12:56 AM Bug report #12766: modeller: number used to define a default for a parameter (from a list) is ign...
not a saga thing, but a modeller one where the parameter/number used to define the default parameter (from a list) is... Giovanni Manghi
12:56 AM Bug report #12766: modeller: number used to define a default for a parameter (from a list) is ign...
not a saga thing, but a modeller one where the parameter/number used to define the default parameter (from a list) is... Giovanni Manghi
12:22 AM Bug report #12779 (Closed): Attribute table edits appear not to be working after sort
Hi, this has been fixed in latest qgis versions, give a try to 2.8.2. Cheers! Giovanni Manghi
12:22 AM Bug report #12779 (Closed): Attribute table edits appear not to be working after sort
Hi, this has been fixed in latest qgis versions, give a try to 2.8.2. Cheers! Giovanni Manghi
11:55 PM Bug report #12234 (Open): QGIS freezes when adding a legend in composer and project has a WMS lay...
Giovanni Manghi
01:30 PM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Testing the problem in detail show, that following elements in the composers make the stress:
- Expression in a Text...
Gerhard Spieles
11:39 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...
Tested QGIS-Codeversion 06732f1 without success
Gerhard Spieles
11:47 PM Bug report #12793 (Feedback): Minidump when adding a layer (vector, raster, etc.)
try rename/remove (make a backup first) the .qgis2 folder, restart qgis and try again. Giovanni Manghi
10:22 PM Bug report #12793 (Closed): Minidump when adding a layer (vector, raster, etc.)
QGIS creates a minidump file, and crashes when I add a layer (whether a new or existing project), regardless of layer... Oscar Alvarez
10:31 AM Bug report #12790 (Closed): Help for r.stream.* modules missing
A 404 page is displayed. Paolo Cavallini
10:31 AM Bug report #12789 (Closed): r.surf.area misses an output
Input is present, output not. Help unclear. Paolo Cavallini
10:08 AM Bug report #12783 (Feedback): Import CSV via "add delimited text layer" ignores Date fields in CSVT
Saber Razmjooei
10:08 AM Bug report #12783: Import CSV via "add delimited text layer" ignores Date fields in CSVT
Maybe this is the limitation of importing it as csv.
If you import it as a spatialite table and then make geometry, t...
Saber Razmjooei
03:01 AM Bug report #12783 (Closed): Import CSV via "add delimited text layer" ignores Date fields in CSVT
When importing a CSV file with fields defined in CSVT, QGIS ignores fields designated as "Date" and imports them as Q... Jeremy Kidwell
08:45 AM Bug report #12778: Quick field calc bar in attribute table bug
I´ve comfirmed in QGIS 2.8.1 and 2.8.2 (WIN8.1 and WIN7). In the Field calculator does not affect but in quick field ... Andre Duarte Duarte
07:16 AM Bug report #12778: Quick field calc bar in attribute table bug
Confirmed also in QGIS 2.8.2
Feild Calculator does not seem to have been affected by this problem.
Saber Razmjooei
08:28 AM Bug report #12770 (Feedback): shapefile gets corrupted after editing
Saber Razmjooei
06:07 AM Bug report #12770: shapefile gets corrupted after editing
Maybe worth providing sample data. Saber Razmjooei
06:53 AM Bug report #12787 (Closed): Crash when not selecting layer in Value Relation edit widget
Fixed in changeset commit:"c33b9fa1d5c39758313ae39c173801d0ea764655". Martin Dobias
06:39 AM Bug report #12787: Crash when not selecting layer in Value Relation edit widget
Suggested fix: https://github.com/qgis/QGIS/pull/2049 Jakob Hvitnov
06:20 AM Bug report #12787 (Closed): Crash when not selecting layer in Value Relation edit widget
Reproducible crash (SIGSEV2 segmentation fault) when selecting the "Value Relation" type of edit widget and exiting t... Jakob Hvitnov
06:48 AM Feature request #12788 (Open): Absolute path to images in composer
It would be nice to be able to save the absolute path to the images you use in a composer, and espacially (more neede... Filip Mahieu
06:37 AM Bug report #12752: QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
Attached is more info Saber Razmjooei
06:37 AM Bug report #12752: QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
Attached is more info Saber Razmjooei
06:34 AM Bug report #12752: QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
It works for me:
QGIS 2.8.2 - 64 bit
GDAL: GDAL/OGR 1.11.2
Windows 7
OSGEO4W installer
Saber Razmjooei
06:21 AM Feature request #6949 (Closed): raster "save as..." dialog misses the "add result to map" option
Fixed in changeset commit:"7e69bd12869ce6dc2a4bc61533902429c151cb03". Alexander Bruy
05:34 AM Bug report #12668: Edit widget properties not saved
Tested on QGIS dev in Ubuntu 14.04 for every edit widget type with no issues.
All edit widgets selectors keep their s...
Jakob Hvitnov
05:10 AM Bug report #12639 (Closed): Convex hull does not save a prj file
Paolo Cavallini
04:12 AM Bug report #12705: Vector layer scatterplot: inverted axes
Also backported to 2.8 Alexander Bruy
04:11 AM Bug report #12705 (Closed): Vector layer scatterplot: inverted axes
Fixed in changeset commit:"8ad18834fbfeba793e3f54882bff755c100d424d". Alexander Bruy
03:52 AM Feature request #12784 (Closed): Allow scripts to deactivate CRS warning
As discussed during the dev meeting: it would be nice to have a way to deactivate the CRS warning (when input layers ... Anita Graser
03:08 AM Feature request #12430: GetFeatureInfo with INFO_FORMAT=text/html should only send HTML maptip co...
Any thoughts about this feature ? René-Luc ReLuc
03:08 AM Feature request #12430: GetFeatureInfo with INFO_FORMAT=text/html should only send HTML maptip co...
Any thoughts about this feature ? René-Luc ReLuc
03:07 AM Bug report #12060: WFS: missing fields when using GetFeature on a layer with a join
I thought this bug has been fixed in 2.8.2 with this commit 4f36b6572e71ed16f2071081f2f152c1d290b7cb cherry-picked fr... René-Luc ReLuc

2015-05-19

01:55 AM Feature request #12782 (Open): Boxplot graphs for vectors
The new histogram tab for the graduated classification in the vector menu is really useful.
Add a similar tab with bo...
matteo ghetta
01:52 AM Bug report #12768: Create points along lines fails
Also backported to 2.8 Alexander Bruy
01:51 AM Bug report #12768 (Closed): Create points along lines fails
Fixed in changeset commit:"d978f3fd9bb61f8da0bac0e175bf623e5e6c5688". Alexander Bruy
01:47 AM Bug report #12731: Error using "Number of unique values in classes" algorithm
Also backported to 2.8 Alexander Bruy
01:46 AM Bug report #12731 (Closed): Error using "Number of unique values in classes" algorithm
Fixed in changeset commit:"426596c29faef4b0c233949d47fe947df9d6bfe9". Alexander Bruy
01:40 AM Bug report #12289: Select by Attribute via Processing does not work properly
Also backported to 2.8 Alexander Bruy
01:38 AM Bug report #12289 (Closed): Select by Attribute via Processing does not work properly
Fixed in changeset commit:"9b41e7bb9ac7546ddad9a705530f2639b8b24650". Alexander Bruy
01:29 AM Bug report #12710: Processing: r.covar echoes the command to the Result window
Also backported to 2.8 Alexander Bruy
01:24 AM Bug report #12710 (Closed): Processing: r.covar echoes the command to the Result window
Fixed in changeset commit:"028467eaf93ca5422625326e254de25197388a96". Alexander Bruy
01:29 AM Feature request #12781 (Open): New histograms for rasters
The new histogram tab for vector is very useful and looks nice. It would be good to extend it also for raster, in ord... Paolo Cavallini
01:21 AM Bug report #11495 (Rejected): it is not possible to select the extent of another layer in the Mod...
There are special algorithms in modeler for this: "Vector layer bounds" and "Raster layer bounds" from "Modeler-only ... Alexander Bruy
01:21 AM Bug report #11495 (Rejected): it is not possible to select the extent of another layer in the Mod...
There are special algorithms in modeler for this: "Vector layer bounds" and "Raster layer bounds" from "Modeler-only ... Alexander Bruy
01:18 AM Bug report #12702 (Feedback): Help for all qgis:graphics missing
If I'm not wrong, these algorithms was reactivated after 2.6, so their descriptions not available in 2.6 manual. When... Alexander Bruy
01:13 AM Bug report #12587: Processing field calculator misses recent expression
Also backported to 2.8 Alexander Bruy
01:10 AM Bug report #12587 (Closed): Processing field calculator misses recent expression
Fixed in changeset commit:"dbf026d3c6762b1c9638cc86461390e7b3c4ddc6". Alexander Bruy
01:13 AM Bug report #12639 (Feedback): Convex hull does not save a prj file
Not reproducible here Alexander Bruy
01:04 AM Bug report #12643: Processing convex hull does not work
Also backported to 2.8 Alexander Bruy
01:02 AM Bug report #12643 (Closed): Processing convex hull does not work
Fixed in changeset commit:"71fa5d41a173c55a2369d92f111d06aeb64091de". Alexander Bruy
12:36 AM Bug report #12780 (Closed): Correct GML interpreted as plain table when XSD is present
I'm not sure if this is a bug or not. I have a correct GML file, and it is interpreted as geospatial data by QGIS, bu... Joeri Theelen
12:12 AM Bug report #12646 (Closed): Split RGB bands stopped to work in latest Processing releases
Giovanni Manghi
12:01 AM Bug report #12779 (Closed): Attribute table edits appear not to be working after sort
I guess this is a bug:
# start QGIS and load a shapefile;
# open the shapefile attribute table and start an edit sess...
Joeri Theelen
11:37 PM Bug report #12772 (Closed): two SAGA branches in Processing configuration dialog
Victor Olaya
04:48 AM Bug report #12772 (Closed): two SAGA branches in Processing configuration dialog
Victor Olaya
01:08 PM Bug report #12234 (Feedback): QGIS freezes when adding a legend in composer and project has a WMS...
Please test and give feedback with latest master (commit:06732f137357ff1f3c2a55a3253037d8df85596b) Nyall Dawson
09:26 AM Bug report #12778 (Closed): Quick field calc bar in attribute table bug
When I delete or add fields and use quick field calc bar then update the wrong field. For example, I have four fields... Andre Duarte Duarte
09:16 AM Bug report #12757: Zoom out crashes QGIS
PR open for comments:
https://github.com/qgis/QGIS/pull/2044
Sandro Santilli
08:19 AM Bug report #12757: Zoom out crashes QGIS
Confirmed. Doesn't require anything being loaded on the map.
The problem is an overflow on scale values. Should we li...
Sandro Santilli
08:03 AM Bug report #12757: Zoom out crashes QGIS
easy replicatable by using the scrollwheel of a mouse: just keep zooming out by running the wheel...
Richard Duivenvoorde
09:09 AM Bug report #12777 (Closed): Processing: Grass 7 r.relief has different "units" parameter than Gra...
The algorithm r.relief can not be executed since the parameters for "units" have changed from "none, meters, feet" to... Markus Mayr
09:05 AM Feature request #12776 (Open): Attribute table undo button
Undo button in the menu of the attribute table increase productivity. Filling some avoid errors. Is possible to add t... Andre Duarte Duarte
08:16 AM Bug report #11967: r.statistics needs to be implemented as a special case in Processing (or removed)
I added the proposed step to the processing code: https://github.com/qgis/QGIS/pull/2043
For me, this produces valid ...
Markus Mayr
07:28 AM Bug report #12775 (Closed): r.flow had a compulsory parameter that should be optional
See the manpage: "optionally an input aspect raster map aspin and/or an input barrier raster map barin".
barin is def...
Paolo Cavallini
06:36 AM Bug report #12774: Attribute table only show first 99 rows from SQL Server views
I was wrong, this behavior is not found from the local SQL Server db. I get all rows from the same views. Jason Moore
06:28 AM Bug report #12774 (Closed): Attribute table only show first 99 rows from SQL Server views
Whenever I add a non spatial SQL Server layer from a view and check the attribute table there are only 99 rows return... Jason Moore
06:08 AM Bug report #12773 (Closed): processing uses polyg style for lines and points
Victor Olaya
05:59 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Should have been fixed with commit:27f1d9fb3ebb2445c7bec4350fd5b822d4d718e1 -- can you confirm ? Sandro Santilli
04:04 AM Bug report #12771 (Rejected): error Segmentation fault
Problem with Debian packaging. They are aware of it, going to fix, hopefully soon. Paolo Cavallini
04:04 AM Bug report #12771 (Rejected): error Segmentation fault
Problem with Debian packaging. They are aware of it, going to fix, hopefully soon. Paolo Cavallini
03:42 AM Bug report #12771 (Closed): error Segmentation fault
Hi evrybody,
since a view days qgis (after an update) crashes when open a sqlite database.
massage:
src/core/qgspro...
reiko fuerst
02:32 AM Bug report #12770 (Closed): shapefile gets corrupted after editing
I'm using Windows 8.1, tried few versions of QGIS and they all give me the same problem. Have no issues editing the s... Weronika Rapa
02:10 AM Feature request #12769 (Open): Data defined opacity for vector features
Hi !
Lately, more and more settings got data-definable. But it seems opacity/transparency was somewhat forgotten !
...
Olivier Dalang

2015-05-18

01:56 AM Bug report #12768 (Closed): Create points along lines fails
Algorithm Create points along lines starting...
name 'QGis' is not defined See log for more details
Uncaught error w...
Paolo Cavallini
12:48 AM Bug report #5702: GRASS output is not georeferenced
More useful info from the mailing list. See thread here:
http://lists.osgeo.org/pipermail/qgis-developer/2014-October...
Paolo Cavallini
12:42 AM Bug report #12767 (Closed): SAGA "ParameterSelection" default value is not respected in the modeller
*New description:*
Apparently in the modeler the defaults for ParameterSelection parameters are not respected and dif...
Paolo Cavallini
01:39 PM Bug report #3975: PDF exports on OSX always convert text to outlines
I still see this issue in PDFs using QGIS 2.8.1 on Windows 10, even after unchecking the "draw text as outlines" box ... Nick S
01:06 PM Bug report #3975: PDF exports on OSX always convert text to outlines
Just confirmed the bug for MacOSX (10.9.5). Tested on linux and Windows, it works fine there. So the remaining proble... Barend Kobben
01:18 PM Bug report #12750 (Closed): Labelling: replace a space with return conflicts with Return within a...
Fixed in changeset commit:"4b4075b5b94d84abf51831409626b6321898c40e". Nyall Dawson
08:38 AM Bug report #12766 (Closed): modeller: number used to define a default for a parameter (from a lis...
The default method for saga:slope,aspect etc is 6, whereas the same alg when used in a model has a default of 0.
This...
Paolo Cavallini
07:58 AM Bug report #12701: QGIS crashes when trying to add ODBC new layer
And by de eVis plugin opens the list table more or less instantaneously (with two databases). Joan Molinas
07:29 AM Bug report #12701: QGIS crashes when trying to add ODBC new layer
I tried it with version 1.8, and it works but it takes very long time.
I've also tried with version 2.4 and does not...
Joan Molinas
06:08 AM Bug report #12747: [OSX] problem with composer grids and frames
hi,
Giovanni, I read that an issue is tagged as blocker if the feature has ever worked in a previous release. In Os X...
Harrissou Santanna
05:44 AM Feature request #12765 (Open): Drive time isochrones (vector tool)
It would be fantastic to be able to create drive time isochorones (or areas) using qGIS only! At present, creating dr... Frank Schuessler
05:07 AM Bug report #12764 (Closed): Processing: GRASS r.quantiles produce an empty output
For html; unclear role of the text output. Paolo Cavallini
04:29 AM Bug report #12763 (Closed): Processing: GRASS r.horizon do not produce an output
Both modules (*.height actually missed an output parameter) Paolo Cavallini
04:28 AM Bug report #12762: Map polluted by circles ?!
But I never enabled diagrams in any of the two versions, how did they get enabled ? Sandro Santilli
03:47 AM Bug report #12762 (Closed): Map polluted by circles ?!
This happens if you save a project in master and then open in 2.8. You can fix it by turning off diagrams for the lay... Nyall Dawson
03:47 AM Bug report #12762 (Closed): Map polluted by circles ?!
This happens if you save a project in master and then open in 2.8. You can fix it by turning off diagrams for the lay... Nyall Dawson
03:06 AM Bug report #12735: Qgis cannot read PRJ file of DXF and PDF
unfortunately it does not work even with files QPJ .....
is possibile to make little QGS file only for one PDF or DXF...
malcom jamal

2015-05-17

01:09 AM Bug report #12762 (Closed): Map polluted by circles ?!
This is a pretty weird bug I'm facing.
My map contains circles that move around whenever I zoom.
The circles seem to ...
Sandro Santilli
11:49 PM Feature request #12761 (Rejected): More uniform naming of Progessing algs
Currently, different naming is used for the same or similar commands, as they reflect original heterogeneous names fr... Paolo Cavallini
11:25 PM Bug report #12760 (Closed): Qgis 2.8, gdal python scripts gives error at end of process
I am using Qgis 2.8.1 64-bit (Standalone installer) on Windows 7 64-bit. In the OSGeo4W Shell I am encountering a pro... Henry White
04:31 PM Bug report #12755: QGIS intermittent crash since 2.8.1
I'm using dbsql(connectionName,sqlQuery) from the refFunctions plugin to get random rows from the postgres db which i... Sean Lin
04:47 AM Bug report #12755: QGIS intermittent crash since 2.8.1
You're using virtual field with a custom function that directly accesses the database via QtSql? Jürgen Fischer
04:40 AM Bug report #12755: QGIS intermittent crash since 2.8.1
I'm using pgbouncer with postgresql 9.3.5 x64. Had a prior problem with idle connections being left opened. Sean Lin
04:36 AM Bug report #12755 (Closed): QGIS intermittent crash since 2.8.1
The following stackdump happens intermittently but usually when I move a vector point to a new location. ... Sean Lin
12:56 PM Bug report #12759 (Closed): Advanced digitizing: two panels with the same name
One is the extended tools for basic digitizing, the other is the new CAD-style digitizing.
My suggestion: add the fi...
Paolo Cavallini
12:35 PM Bug report #12758 (Closed): Infinite zoom out is allowed in Print layout
From test limiting the zoomout to 1-5% should be more than enough for everybody.
Better still to limit it to the size...
Paolo Cavallini
12:32 PM Bug report #12757 (Closed): Zoom out crashes QGIS
Pretty simple to replicate.
Thanks Tim for letting us know.
Paolo Cavallini
11:13 AM Bug report #12756 (Closed): Plugin installer: box for repositories too high
We currently have only one official repo, and it is unlikely than users will heve more than two. The current box for ... Paolo Cavallini
05:16 AM Bug report #12433 (Closed): Expression builder dialog becomes too wide because of preview string
Fixed in changeset commit:"204cf7519500de7ceff298ef450c60479fe11acf". Nyall Dawson

2015-05-16

06:55 AM Bug report #8942: R6034 runtime error
I just installed 2.8.2 32-bit version on both a 64-bit machine and a 32-bit machine. The R6034 error message appears... Chris George
03:12 AM Feature request #12754 (Open): Add split part from a multipart polygon
The current tool split parts is only splitting a single polygon in two
parts of the same record. The part cannot be ...
Paolo Cavallini

2015-05-15

07:59 AM Feature request #12753: Keep topology when simplifying polygons
NB: I mean when using the "Simplify" tool in the Vector menu (to simplify a layer), not the "Simplify" tool in the Ad... shenriod -
05:52 AM Feature request #12753 (Closed): Keep topology when simplifying polygons
When using the "simplify" tool on a polygon layer, the topology is destroyed and many gaps appear between polygons th... shenriod -

2015-05-14

01:52 PM Bug report #12752 (Feedback): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
it may be not a qgis issue after all, in fact
[email protected]:~/Downloads > gdalinfo snfl_2014093012_to_2015050112...
Giovanni Manghi
01:52 PM Bug report #12752 (Feedback): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
it may be not a qgis issue after all, in fact
[email protected]:~/Downloads > gdalinfo snfl_2014093012_to_2015050112...
Giovanni Manghi
01:52 PM Bug report #12752 (Feedback): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
it may be not a qgis issue after all, in fact
[email protected]:~/Downloads > gdalinfo snfl_2014093012_to_2015050112...
Giovanni Manghi
01:21 PM Bug report #12752 (Closed): QGIS 2.0 to 2.8 segmentation fault opening/reading NetCDF + CF grid
Several versions of qgis on several platforms (Fedora Core 19, Ubuntu 14.04, Mac OS Mavericks) segfault and bomb when... Greg Fall
12:59 PM Bug report #12748 (Closed): crash creating layer from delimited text file
Giovanni Manghi
07:28 AM Bug report #12748: crash creating layer from delimited text file
dear Giovanni Manghi,
thank you for your feedback. it seems that i have solved this issue by updating my windows 7.
a...
zamir rasid
07:28 AM Bug report #12748: crash creating layer from delimited text file
dear Giovanni Manghi,
thank you for your feedback. it seems that i have solved this issue by updating my windows 7.
a...
zamir rasid
11:02 AM Bug report #12646: Split RGB bands stopped to work in latest Processing releases
see https://github.com/qgis/QGIS/pull/2037 Giovanni Manghi
11:02 AM Bug report #12646: Split RGB bands stopped to work in latest Processing releases
see https://github.com/qgis/QGIS/pull/2037 Giovanni Manghi
11:02 AM Bug report #12646: Split RGB bands stopped to work in latest Processing releases
see https://github.com/qgis/QGIS/pull/2037 Giovanni Manghi
05:05 AM Bug report #12646: Split RGB bands stopped to work in latest Processing releases
Giovanni, could you upload that sh file, so i can see what is wrong with it?
Thanks!
Victor Olaya
10:35 AM Bug report #12429: Run only the selected part of a SQL query
Let me know if there is a problem with these two PR.
Can you please review them ? 2.8.2 is already out.
Etienne Trimaille
09:53 AM Bug report #12751 (Closed): When advanced (CAD) digitizing is ON, Overview panel cannot be resized
It remains pretty big. When deactivating the panel, the normal behaviour is resumed. Paolo Cavallini
09:52 AM Bug report #12750 (Closed): Labelling: replace a space with return conflicts with Return within a...
Return within a string and the option to replace a character (typically space) with return do not interact nicely (th... Paolo Cavallini
06:03 AM Bug report #12749 (Closed): when using custom functions to style a layer, map canvas gives wrong ...
Sorry, I don't know how i may title this bug... Hope that I'll explain it well.
I've set a custom function that I app...
Harrissou Santanna
02:08 AM Bug report #12628: DBManager doesn't properly manage timestamp format
Same problem with 'time without time zone' data type Moreno Comelli

2015-05-13

01:06 AM Bug report #12748 (Feedback): crash creating layer from delimited text file
Please attach the offending csv file. Giovanni Manghi
01:06 AM Bug report #12748 (Feedback): crash creating layer from delimited text file
Please attach the offending csv file. Giovanni Manghi
01:06 AM Bug report #12748 (Feedback): crash creating layer from delimited text file
Please attach the offending csv file. Giovanni Manghi
01:06 AM Bug report #12748 (Feedback): crash creating layer from delimited text file
Please attach the offending csv file. Giovanni Manghi
01:06 AM Bug report #12748 (Feedback): crash creating layer from delimited text file
Please attach the offending csv file. Giovanni Manghi
10:44 PM Bug report #12748 (Closed): crash creating layer from delimited text file
hello. my name is zamir and i'am a new user for qgis. i want to report a bug that i encountered.
Right now im doing t...
zamir rasid
01:33 PM Bug report #11077: Segfault when using QgsComposition().exportAsPdf() in python
Hi men.
I think my problem is related......
Evan GAROT--ADRIAN
06:58 AM Bug report #12747: [OSX] problem with composer grids and frames
Ohw I forgot the title:
Problème with Grid and particulars on Max OS X QGIS version 2.6.1 and 2.8.1
delinte thibault
06:21 AM Bug report #12747 (Closed): [OSX] problem with composer grids and frames
Hello everybody,
I come back to you
I went to "georezo":http://georezo.net/forum/viewtopic.php?pid=268356 and they ...
delinte thibault
04:14 AM Bug report #12729 (Closed): QT Forms. Opening two forms using IdentifyFeatures crashes
Fixed in changeset commit:"03da1fcabd31d6b726dffe8f8bb07c53d3f15132". Matthias Kuhn
03:03 AM Bug report #12729: QT Forms. Opening two forms using IdentifyFeatures crashes
Just to be sure it is not related to your particular python scripts: Does it also happen with a very minimal python i... Matthias Kuhn
04:14 AM Bug report #12711 (Closed): Error when opening more than one form with init function
Fixed in changeset commit:"03da1fcabd31d6b726dffe8f8bb07c53d3f15132". Matthias Kuhn
04:14 AM Bug report #12676 (Closed): Subforms with Python init function crash when adding values
Fixed in changeset commit:"03da1fcabd31d6b726dffe8f8bb07c53d3f15132". Matthias Kuhn
03:00 AM Bug report #10724 (Closed): Drag and Drop Designer - Edit tabs or groups labels
Fixed in changeset commit:"d64086d1bce10a863d3aa1867cfe53fcb6268f17". Matthias Kuhn
02:57 AM Feature request #9469 (Rejected): Split lines with points layer
Duplicates #5040 Alexander Bruy
02:57 AM Feature request #9469 (Rejected): Split lines with points layer
Duplicates #5040 Alexander Bruy
02:16 AM Feature request #12741: Layer output to file should be loaded inside the TOC with the same name o...
I've made a PR: https://github.com/qgis/QGIS/pull/2036 Giovanni Allegri

2015-05-12

01:47 AM Feature request #12709 (Closed): Ability to resize Handle Bad Layers window QGIS 2.8.1
Giovanni Manghi
01:25 AM Feature request #12709: Ability to resize Handle Bad Layers window QGIS 2.8.1
OK, sorry, my fault, I missed that, you can close this ticket. Lars Scharfenberg
01:16 AM Feature request #12709: Ability to resize Handle Bad Layers window QGIS 2.8.1
Hi
It's already possible to enlarge the whole dialog. Just need to pick it in the blue border and you can resize it. ...
Harrissou Santanna
01:02 AM Feature request #12741: Layer output to file should be loaded inside the TOC with the same name o...
Giovanni Allegri wrote:
> Thanks Giovanni, I missed that option. Anyway, I think it should be default behaviour when ...
Giovanni Manghi
02:36 PM Feature request #12741: Layer output to file should be loaded inside the TOC with the same name o...
Thanks Giovanni, I missed that option. Anyway, I think it should be default behaviour when a file is chosen as output... Giovanni Allegri
02:09 PM Feature request #12741 (Feedback): Layer output to file should be loaded inside the TOC with the ...
you can change this behavior in
processing > options > general > use filename as layer name
Giovanni Manghi
08:45 AM Feature request #12741 (Open): Layer output to file should be loaded inside the TOC with the same...
When a user saves the ouput of an algorithm to a file, it should be loaded to QGIS with the same name of the output f... Giovanni Allegri
12:49 AM Bug report #12629: Vector Layer TranslateFeatures performance (2.8.1 vs 1.8.0)
Firstly I posted this question on the Qgis developers mailing list.
Secondly I tried to play with "grouped"/"ungroup...
jopan -
12:33 AM Bug report #12746 (Closed): qgis 1:2.8.1-0+20trusty in ubuntugis unstable repository has unresolv...
Please use 2.8.2 from our ubuntugis repository at http://qgis.org/ubuntugis (see "Debian/Ubuntu":http://qgis.org/en/s... Jürgen Fischer
12:33 AM Bug report #12746 (Closed): qgis 1:2.8.1-0+20trusty in ubuntugis unstable repository has unresolv...
Please use 2.8.2 from our ubuntugis repository at http://qgis.org/ubuntugis (see "Debian/Ubuntu":http://qgis.org/en/s... Jürgen Fischer
12:15 AM Bug report #12746 (Closed): qgis 1:2.8.1-0+20trusty in ubuntugis unstable repository has unresolv...
The qgis version in the ubuntugis unstable repository has a dependency on libgdal.so.1-1.11.1 but the available versi... Andreas Wiesmann
11:50 PM Bug report #12734: QGis crashes when deleting last vertex of a postgis MultiLineString part
Giving it another try, I can only reproduce it when I delete the last vertex +of the last part+ of the MultiLineString. Christophe Damour
03:06 PM Bug report #12745 (Closed): processing python error
using the GRASS r.drain module I'm getting (master and 2.8.2, Windows and Linux) the following python error that does... Giovanni Manghi
02:55 PM Bug report #12744 (Closed): Italian translation of "Output layer" should be "Strato in uscita"
"Output layer" is translated both as "Vettore in uscita" and "Raster in uscita" (https://www.transifex.com/projects/p... Giovanni Allegri
02:52 PM Bug report #12742 (Closed): Fix output parameter names
I've just verified that it's a italian translation issue. "Output layer" is translated both as "Vettore in uscita" an... Giovanni Allegri
02:11 PM Bug report #12742 (Feedback): Fix output parameter names
can you make an example of a tool that misbehave as you describe? Giovanni Manghi
08:47 AM Bug report #12742 (Closed): Fix output parameter names
There are many algorithms where the output parameter name is not consistent with the type of output.
E.g. "Raster Out...
Giovanni Allegri
01:34 PM Bug report #12740: Algorithms sometimes disappear from the toolbox
I confirm the issue. Unable to replicate it reliably though. Only seen with the simplified interface. Paolo Cavallini
01:24 PM Bug report #12740: Algorithms sometimes disappear from the toolbox
weird, I also give quite a lot of training and I do not remember someone to have ever hit this issue. Giovanni Manghi
08:43 AM Bug report #12740 (Closed): Algorithms sometimes disappear from the toolbox
That's explained in the subject.
Many users are facing this issue. During my courses I hear them complaining they can...
Giovanni Allegri
01:20 PM Bug report #12743: SegFault on adding composer map on a composition
Hi Nyall.
Im really sorry because i found this solution, i test it and that don't work the first time. That's why i ...
Evan GAROT--ADRIAN
12:30 PM Bug report #12743 (Closed): SegFault on adding composer map on a composition
This line:... Nyall Dawson
12:30 PM Bug report #12743 (Closed): SegFault on adding composer map on a composition
This line:... Nyall Dawson
09:27 AM Bug report #12743 (Closed): SegFault on adding composer map on a composition
I've a segfault on adding a QgsComposerMap to a QgsComposition
Code (last line):...
Evan GAROT--ADRIAN
01:19 PM Bug report #12710 (Open): Processing: r.covar echoes the command to the Result window
Paolo Cavallini wrote:
> Seems fixed in QGIS 2.8.2
it does not seems fixed here, tested on both 2.8.2 and master und...
Giovanni Manghi
01:19 PM Bug report #12710 (Open): Processing: r.covar echoes the command to the Result window
Paolo Cavallini wrote:
> Seems fixed in QGIS 2.8.2
it does not seems fixed here, tested on both 2.8.2 and master und...
Giovanni Manghi
11:02 AM Bug report #12710 (Feedback): Processing: r.covar echoes the command to the Result window
Seems fixed in QGIS 2.8.2 Paolo Cavallini
12:07 PM Bug report #12729: QT Forms. Opening two forms using IdentifyFeatures crashes
Hi Matthias
I do confirm that if I remove the python it doesn't crash.
If the python is present then when i close t...
Stelios Papageorgiou
11:08 AM Bug report #3792: When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> I'll check during HF. I think closing an issue that is still valid for LTR would not be appr...
Giovanni Manghi
10:56 AM Bug report #3792: When loading the same layer twice, new diagrams disappear
I'll check during HF. I think closing an issue that is still valid for LTR would not be appropriate, as people will k... Paolo Cavallini
05:25 AM Bug report #3792: When loading the same layer twice, new diagrams disappear
Well, it would still be nice to receive a definite "resolved" from Paolo. There's still a chance it's an unaddressed ... Nyall Dawson
05:04 AM Bug report #3792 (Feedback): When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> Thanks for clarifying. So essentially this remains an open issue for LTR, fixed in master.
...
Giovanni Manghi
05:04 AM Bug report #3792 (Feedback): When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> Thanks for clarifying. So essentially this remains an open issue for LTR, fixed in master.
...
Giovanni Manghi
04:43 AM Bug report #3792 (Open): When loading the same layer twice, new diagrams disappear
Thanks for clarifying. So essentially this remains an open issue for LTR, fixed in master. Paolo Cavallini
02:15 AM Bug report #3792: When loading the same layer twice, new diagrams disappear
Unfortunately it's not possible to backport this one - it's a fairly large change that requires a break in project fo... Nyall Dawson
11:02 AM Bug report #11439: r.covar GRASS command (and possibly others) in Processing does not return visi...
Confirmed, it works now.
Thanks.
Paolo Cavallini
08:40 AM Bug report #4159: Should detect a grayscale image with an alpha channel as grayscale (and related...
This issue appears to still be present in current master.
Also, this happens when a GeoTiff (grayscale raster with a...
Larry Shaffer
08:40 AM Bug report #4159: Should detect a grayscale image with an alpha channel as grayscale (and related...
This issue appears to still be present in current master.
Also, this happens when a GeoTiff (grayscale raster with a...
Larry Shaffer
08:40 AM Bug report #4159: Should detect a grayscale image with an alpha channel as grayscale (and related...
This issue appears to still be present in current master.
Also, this happens when a GeoTiff (grayscale raster with a...
Larry Shaffer
08:40 AM Bug report #4159: Should detect a grayscale image with an alpha channel as grayscale (and related...
This issue appears to still be present in current master.
Also, this happens when a GeoTiff (grayscale raster with a...
Larry Shaffer
07:36 AM Bug report #12738 (Closed): After using "difference" consider 2 or more separated polygons as one
This bug (unconvinience) appears while working with vector layers, particularly when counting difference (Vector> Geo... Ekaterina Petrunenko
06:56 AM Feature request #12737 (Closed): Accessing style in sqlite database
Jürgen Fischer
05:32 AM Feature request #12737: Accessing style in sqlite database
My brain stopped working!
I tried to add the spatialite layer through folder connections...
Close the issue!
Klas Karlsson
05:18 AM Feature request #12737 (Closed): Accessing style in sqlite database
The QGIS Browser panel is the easiest way to add data to projects. Just drag and drop. It works fine for most datatyp... Klas Karlsson
03:15 AM Bug report #12736 (Closed): Problems managing WMS metadata
* When adding a WMS layer, the abstract is not shown for the root element, but for layers only. It's correctly shown ... Moreno Comelli
02:44 AM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
Giovanni Manghi wrote:
> Sitansu Pattnaik wrote:
> > Well I conducted a training for close to 60 people last week. In...
Sitansu Pattnaik

2015-05-11

01:39 AM Bug report #12735 (Closed): Qgis cannot read PRJ file of DXF and PDF
hi,
i have many little survey with local coordinate, this can correctly georeferenced with USER CRS, but when the CRS...
malcom jamal
01:17 AM Bug report #12713 (Feedback): when columns have the same name, styling with the first one does no...
There are two issues here, but the real one seems a qgis issue.
The SAGA module gridstatisticsforpolygons creates an...
Giovanni Manghi
01:17 AM Bug report #12713 (Feedback): when columns have the same name, styling with the first one does no...
There are two issues here, but the real one seems a qgis issue.
The SAGA module gridstatisticsforpolygons creates an...
Giovanni Manghi
01:17 AM Bug report #12713 (Feedback): when columns have the same name, styling with the first one does no...
There are two issues here, but the real one seems a qgis issue.
The SAGA module gridstatisticsforpolygons creates an...
Giovanni Manghi
01:17 AM Bug report #12713 (Feedback): when columns have the same name, styling with the first one does no...
There are two issues here, but the real one seems a qgis issue.
The SAGA module gridstatisticsforpolygons creates an...
Giovanni Manghi
12:38 AM Bug report #12734 (Feedback): QGis crashes when deleting last vertex of a postgis MultiLineString...
Cannot confirm on qgis master on Linux. Giovanni Manghi
12:38 AM Bug report #12734 (Feedback): QGis crashes when deleting last vertex of a postgis MultiLineString...
Cannot confirm on qgis master on Linux. Giovanni Manghi
11:57 PM Bug report #12734 (Closed): QGis crashes when deleting last vertex of a postgis MultiLineString part
QGis crashes when I try to delete the last vertex of a postgis MultiLineString part.
Christophe Damour
12:10 AM Bug report #3792: When loading the same layer twice, new diagrams disappear
Cannot install master right now. Could anyone please confirm? In any case, the ticket should be left open for a backp... Paolo Cavallini
12:13 PM Bug report #3792 (Feedback): When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> I confirm the bug is still true for 2.8.2, and very easy to replicate in my case.
> Removing...
Giovanni Manghi
12:13 PM Bug report #3792 (Feedback): When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> I confirm the bug is still true for 2.8.2, and very easy to replicate in my case.
> Removing...
Giovanni Manghi
12:13 PM Bug report #3792 (Feedback): When loading the same layer twice, new diagrams disappear
Paolo Cavallini wrote:
> I confirm the bug is still true for 2.8.2, and very easy to replicate in my case.
> Removing...
Giovanni Manghi
10:27 AM Bug report #3792 (Reopened): When loading the same layer twice, new diagrams disappear
I confirm the bug is still true for 2.8.2, and very easy to replicate in my case.
Removing the second layer and openi...
Paolo Cavallini
10:27 AM Bug report #3792 (Reopened): When loading the same layer twice, new diagrams disappear
I confirm the bug is still true for 2.8.2, and very easy to replicate in my case.
Removing the second layer and openi...
Paolo Cavallini
12:02 AM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still true in 2.8.2. The issue is not translating the help, but using the one already translated. Paolo Cavallini
12:02 AM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still true in 2.8.2. The issue is not translating the help, but using the one already translated. Paolo Cavallini
12:02 AM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still true in 2.8.2. The issue is not translating the help, but using the one already translated. Paolo Cavallini
12:02 AM Bug report #10636 (Reopened): Translation for command description and help in Processing: GRASS a...
Still true in 2.8.2. The issue is not translating the help, but using the one already translated. Paolo Cavallini
02:23 PM Bug report #10636 (Closed): Translation for command description and help in Processing: GRASS and...
closing for lack of feedback. Giovanni Manghi
02:23 PM Bug report #10636 (Closed): Translation for command description and help in Processing: GRASS and...
closing for lack of feedback. Giovanni Manghi
10:50 PM Bug report #12733 (Closed): Layer order list corrupted if a layer reference can't be resolved
If a project has a layer order that overrides the default rendering order and a layer reference can't be resolved dur... Andreas Neumann
05:33 PM Bug report #12732 (Closed): segfault in qtwebkit-4.8.6
Well, just found I had a pretty old version of the OpenLayers plugin, which apparently manages to kill qtwebkit with ... Victor Matare
05:03 PM Bug report #12732: segfault in qtwebkit-4.8.6
just found the QT5 cmake option, will try to build against QT5 and report back. Victor Matare
04:56 PM Bug report #12732 (Closed): segfault in qtwebkit-4.8.6
for me, qgis 2.8.1 consistently produces the attached segfault when adding an OpenLayers basemap. Now I realize this ... Victor Matare
02:31 PM Bug report #11439 (Closed): r.covar GRASS command (and possibly others) in Processing does not re...
closing for lack of feedback (and now the issue with r.covar is another one, see #12710) Giovanni Manghi
02:31 PM Bug report #11439 (Closed): r.covar GRASS command (and possibly others) in Processing does not re...
closing for lack of feedback (and now the issue with r.covar is another one, see #12710) Giovanni Manghi
02:20 PM Bug report #12268 (Closed): Oracle : attributes right padded with white characters.
Giovanni Manghi
02:19 PM Bug report #12508 (Closed): Inverted Polygons in Style Crash with a minidump
closing for lack of feedback. Giovanni Manghi
02:19 PM Bug report #12508 (Closed): Inverted Polygons in Style Crash with a minidump
closing for lack of feedback. Giovanni Manghi
02:18 PM Bug report #12420 (Open): Tools not available in simplified interface
Giovanni Manghi
01:16 PM Bug report #11764 (Closed): Primary digitizing tools do not work in QGIS 2.6 (create and divide p...
closing for lack of feedback. Giovanni Manghi
01:16 PM Bug report #11764 (Closed): Primary digitizing tools do not work in QGIS 2.6 (create and divide p...
closing for lack of feedback. Giovanni Manghi
12:37 PM Bug report #12731: Error using "Number of unique values in classes" algorithm
complete python error is
Uncaught error while executing algorithm
Traceback (most recent call last):
Traceback (most...
Giovanni Manghi
12:37 PM Bug report #12731: Error using "Number of unique values in classes" algorithm
complete python error is
Uncaught error while executing algorithm
Traceback (most recent call last):
Traceback (most...
Giovanni Manghi
12:37 PM Bug report #12731: Error using "Number of unique values in classes" algorithm
complete python error is
Uncaught error while executing algorithm
Traceback (most recent call last):
Traceback (most...
Giovanni Manghi
12:27 PM Bug report #12731 (Closed): Error using "Number of unique values in classes" algorithm
The "Number of unique values in classes" Progessing algorithm returns:
"Algorithm Number of unique values in classes ...
Luca Lanteri
12:34 PM Bug report #11663 (Open): Bad polygon simplification
still true on the latest master. Giovanni Manghi
12:34 PM Bug report #11663 (Open): Bad polygon simplification
still true on the latest master. Giovanni Manghi
10:01 AM Bug report #11939: Updating field values does not work on sorted columns
Confirmed, now it works. Paolo Cavallini
09:57 AM Bug report #10006: Processing>OTB: error in Mean Shift filtering
Confirmed, now it works.
Thanks for checking.
Paolo Cavallini
09:53 AM Bug report #11441: Parallel multi-core rendering glitches with OTF reprojection
Still true for 2.8.1 (Win8 OSGeo4W 64bit). Anita Graser
09:31 AM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
Another update with some more observations:
I completely uninstalled the Nvidia graphics drivers and the problem stil...
Luke Roth
08:21 AM Bug report #12730 (Closed): "Check Geometry Validity" produces incorrect result
The following is a valid, two-part MULTIPOLYGON:
MULTIPOLYGON (((-71.757875 44.565735, -71.748526 44.560716, -71.758...
Daniel Baston
07:16 AM Bug report #12729: QT Forms. Opening two forms using IdentifyFeatures crashes
Just noticed this report here which is very likely related (or even a duplicate) #12711
Can you confirm it is a cras...
Matthias Kuhn
07:01 AM Bug report #12729 (Feedback): QT Forms. Opening two forms using IdentifyFeatures crashes
If you remove the python init function, does it also crash? Matthias Kuhn
06:56 AM Bug report #12729 (Closed): QT Forms. Opening two forms using IdentifyFeatures crashes
Release Wien 2.8.1 Under windows 7.
On the properties of a layer we have selected on "fields tab" the "provide ui-fil...
Stelios Papageorgiou
07:11 AM Bug report #12700: Attribute table : rows are higher than needed (hidpi)
It was introduced by this change:
https://github.com/qgis/QGIS/pull/2014
Now the row height is calculated automatica...
Matthias Kuhn
02:01 AM Bug report #11936 (Closed): Layer Properties - Equal Interval and Pretty Breaks not working when ...
closing for lack of feedback. Giovanni Manghi
02:01 AM Bug report #11936 (Closed): Layer Properties - Equal Interval and Pretty Breaks not working when ...
closing for lack of feedback. Giovanni Manghi

2015-05-10

01:46 AM Bug report #11441 (Open): Parallel multi-core rendering glitches with OTF reprojection
Giovanni Manghi
01:44 AM Bug report #12185 (Open): cannot copy postgis layers between two schemas in the same db using qgi...
Giovanni Manghi
01:40 AM Bug report #10006 (Closed): Processing>OTB: error in Mean Shift filtering
closing for lack of feedback. Giovanni Manghi
01:40 AM Bug report #10006 (Closed): Processing>OTB: error in Mean Shift filtering
closing for lack of feedback. Giovanni Manghi
01:31 AM Bug report #12728 (Closed): Autodeteccion SRC al Abrir ShapeFile no detecta Latitud de Origen
I open shapefile in SRC "Gauss Krugger Buenos Aires", qgis guesses CRS wrong. string PROJ4 of generated SRC is :
+p...
Hernan Nasar
01:13 AM Bug report #11839 (Closed): add WxS layer from browser defaults to first projection instead of pr...
Giovanni Manghi
01:13 AM Bug report #11889 (Open): Setting "use project CRS" in "settings -> options -> CRS > CRS for new ...
Giovanni Manghi
01:11 AM Bug report #11904 (Closed): "Save As" on json layer leads to segfault
Giovanni Manghi
01:09 AM Bug report #11939 (Closed): Updating field values does not work on sorted columns
Giovanni Manghi
01:07 AM Bug report #12696 (Open): Composer Manager - Label rotation
Giovanni Manghi
12:57 AM Bug report #11391 (Closed): select by expression on numerical field doesn't give expected results
seems ok in the latest master. Giovanni Manghi
12:57 AM Bug report #11391 (Closed): select by expression on numerical field doesn't give expected results
seems ok in the latest master. Giovanni Manghi
12:53 AM Bug report #12406 (Feedback): QgsDistanceArea.measure(geometry) - for Polygons in WGS84
Giovanni Manghi
12:45 AM Bug report #5848 (Open): Different icons for QGIS and QGIS Browser
Giovanni Manghi
12:44 AM Bug report #12057: Computed area is wrong when reprojection is active
also
related to QGIS Application - Bug report #9060 Area is wrong in QGIS master (again), closed, 11/13/2013
related ...
Stefan Blumentrath
05:01 AM Bug report #12057: Computed area is wrong when reprojection is active
see also #8558 Giovanni Manghi
12:43 AM Bug report #12305 (Closed): Field widget: Date/Time allow NULL values - does not work
closing for lack of feedback. Giovanni Manghi
12:43 AM Bug report #12305 (Closed): Field widget: Date/Time allow NULL values - does not work
closing for lack of feedback. Giovanni Manghi
12:41 AM Bug report #12254 (Open): MSSQL 2008 SRID not recognized
Giovanni Manghi
12:15 AM Bug report #11742 (Closed): Band jumps back to Band 1 each time properties are made on a layer
closing for lack of feedback. Giovanni Manghi
12:15 AM Bug report #11742 (Closed): Band jumps back to Band 1 each time properties are made on a layer
closing for lack of feedback. Giovanni Manghi
12:09 AM Bug report #3792 (Closed): When loading the same layer twice, new diagrams disappear
closing for lack of feedback. Giovanni Manghi
12:09 AM Bug report #3792 (Closed): When loading the same layer twice, new diagrams disappear
closing for lack of feedback. Giovanni Manghi
12:08 AM Bug report #11624 (Closed): saved layer styles not restoring
closing for lack of feedback. Giovanni Manghi
12:08 AM Bug report #11624 (Closed): saved layer styles not restoring
closing for lack of feedback. Giovanni Manghi
12:01 PM Bug report #12395 (Open): Incorrect coordinates in status bar
Giovanni Manghi
11:53 AM Feature request #11503 (Open): Save as image do not export text annotations
Giovanni Manghi
11:52 AM Bug report #12603: Adding a node to overlapping lines in topological mode no longer works
Nathan Edgars II wrote:
> Ah, now I see the shortcut.
>
> And this is odd. It happens for a shapefile and .qgs file ...
Giovanni Manghi
11:47 AM Bug report #12375 (Closed): Dissolve plugin not working properly
closing for lack of feedback. Giovanni Manghi
11:47 AM Bug report #12375 (Closed): Dissolve plugin not working properly
closing for lack of feedback. Giovanni Manghi
11:45 AM Bug report #12399 (Closed): Expressions: when only a field is used, this is considered an error
closing for lack of feedback. Giovanni Manghi
11:45 AM Bug report #12399 (Closed): Expressions: when only a field is used, this is considered an error
closing for lack of feedback. Giovanni Manghi
10:28 AM Bug report #3975: PDF exports on OSX always convert text to outlines
Can you guys (Giovanni and Jürgen) explain to me what is the problem in solving the bug? I would have not dreamt when... Barend Kobben
08:22 AM Bug report #12597 (Closed): Exported image with world file is not located properly when imported ...
Giovanni Manghi
08:20 AM Bug report #12618 (Closed): 2.8.1 circles which don't seem to be on any layer
Giovanni Manghi
08:19 AM Bug report #12611 (Closed): Field calculator forcing creation of new virtual field on PostgreSQL/...
closing for lack of feedback. Giovanni Manghi
08:19 AM Bug report #12611 (Closed): Field calculator forcing creation of new virtual field on PostgreSQL/...
closing for lack of feedback. Giovanni Manghi
07:37 AM Bug report #12713: when columns have the same name, styling with the first one does not work
Merci Even for checking. So this should be either an issue of Processing, not giving appropriate column names, or ups... Paolo Cavallini
07:37 AM Bug report #12713: when columns have the same name, styling with the first one does not work
Merci Even for checking. So this should be either an issue of Processing, not giving appropriate column names, or ups... Paolo Cavallini
06:11 AM Bug report #12350 (Closed): GDAL output without proper coordinates
closing for lack of feedback. Giovanni Manghi
06:11 AM Bug report #12350 (Closed): GDAL output without proper coordinates
closing for lack of feedback. Giovanni Manghi
06:06 AM Bug report #12529 (Closed): getFeature() expression not working with geometryless tables
closing for lack of feedback. Giovanni Manghi
06:06 AM Bug report #12529 (Closed): getFeature() expression not working with geometryless tables
closing for lack of feedback. Giovanni Manghi
06:05 AM Bug report #12506 (Closed): Crash adding delimited text layer
Giovanni Manghi
06:04 AM Bug report #12501 (Closed): QGIS does consistantly display all features of ESRI .shp files on Map
closing for lack of feedback. Giovanni Manghi
06:04 AM Bug report #12501 (Closed): QGIS does consistantly display all features of ESRI .shp files on Map
closing for lack of feedback. Giovanni Manghi
05:23 AM Bug report #12473 (Closed): $area malfunctioning
Giovanni Manghi
05:22 AM Bug report #12282 (Open): unable to gather unique values or to classify (graduated/categorized) v...
Giovanni Manghi
05:22 AM Bug report #12419 (Closed): QGIS 2.6.1 crashes on right-click change transparency in Layer Proper...
closing for lack of feedback. Giovanni Manghi
05:22 AM Bug report #12419 (Closed): QGIS 2.6.1 crashes on right-click change transparency in Layer Proper...
closing for lack of feedback. Giovanni Manghi
05:21 AM Bug report #12410 (Closed): Application Crash Add vector layer
closing for lack of feedback. Giovanni Manghi
05:21 AM Bug report #12410 (Closed): Application Crash Add vector layer
closing for lack of feedback. Giovanni Manghi
05:20 AM Bug report #12408 (Closed): Impossible to register a image
closing for lack of feedback. Giovanni Manghi
05:20 AM Bug report #12408 (Closed): Impossible to register a image
closing for lack of feedback. Giovanni Manghi
05:19 AM Bug report #11944 (Closed): Save style in database (spatialite) disappeared in QGIS 2.6.1
closing for lack of feedback. Giovanni Manghi
05:19 AM Bug report #11944 (Closed): Save style in database (spatialite) disappeared in QGIS 2.6.1
closing for lack of feedback. Giovanni Manghi
05:18 AM Bug report #11850 (Closed): Can't classify based on joined column
closing for lack of feedback. Giovanni Manghi
05:18 AM Bug report #11850 (Closed): Can't classify based on joined column
closing for lack of feedback. Giovanni Manghi
05:17 AM Bug report #11822 (Closed): Unable to install on Windows 7, 64bit
closing for lack of feedback. Giovanni Manghi
05:17 AM Bug report #11822 (Closed): Unable to install on Windows 7, 64bit
closing for lack of feedback. Giovanni Manghi
05:16 AM Bug report #10098 (Closed): Zooming results in parts of features disappearing when spatial indexe...
Giovanni Manghi
05:15 AM Bug report #11400 (Closed): merge features disregards type
closing for lack of feedback. Giovanni Manghi
05:15 AM Bug report #11400 (Closed): merge features disregards type
closing for lack of feedback. Giovanni Manghi
05:14 AM Bug report #11576 (Closed): Composer legend not responding to pyqgis commands
closing for lack of feedback. Giovanni Manghi
05:14 AM Bug report #11576 (Closed): Composer legend not responding to pyqgis commands
closing for lack of feedback. Giovanni Manghi
05:13 AM Bug report #11512 (Closed): DBManager layer not projecting properly
closing for lack of feedback. Giovanni Manghi
05:13 AM Bug report #11512 (Closed): DBManager layer not projecting properly
closing for lack of feedback. Giovanni Manghi
05:05 AM Bug report #11112 (Closed): Large Format Printing (A1, A0)
closing for lack pf feedback. Giovanni Manghi
05:05 AM Bug report #11112 (Closed): Large Format Printing (A1, A0)
closing for lack pf feedback. Giovanni Manghi
05:00 AM Bug report #8558 (Closed): Switching CRS On The Fly messes up area calculations
see #12057 Giovanni Manghi
05:00 AM Bug report #8558 (Closed): Switching CRS On The Fly messes up area calculations
see #12057 Giovanni Manghi
03:52 AM Bug report #12630 (Closed): Get sample query expression non-responsive for large PostGIS datasets
Jürgen Fischer
03:51 AM Bug report #12630 (In Progress): Get sample query expression non-responsive for large PostGIS dat...
Jürgen Fischer
02:37 AM Bug report #11808 (Closed): [2.6.1] problem upload in the attribute table with $x $y
closing for lack of feedback. Giovanni Manghi
02:37 AM Bug report #11808 (Closed): [2.6.1] problem upload in the attribute table with $x $y
closing for lack of feedback. Giovanni Manghi
02:36 AM Bug report #11992 (Closed): DXF with UTF-8 layer names imported with ascii layer attributes
closing for lack of feedback. Giovanni Manghi
02:36 AM Bug report #11992 (Closed): DXF with UTF-8 layer names imported with ascii layer attributes
closing for lack of feedback. Giovanni Manghi
02:33 AM Bug report #11479 (Closed): Direct printing only prints small area of the print layout
closing for lack of feedback. Giovanni Manghi
02:33 AM Bug report #11479 (Closed): Direct printing only prints small area of the print layout
closing for lack of feedback. Giovanni Manghi
02:29 AM Bug report #11449 (Closed): .osm extension missing when downloading OSM data with the "download O...
closing for lack of feedback. Giovanni Manghi
02:29 AM Bug report #11449 (Closed): .osm extension missing when downloading OSM data with the "download O...
closing for lack of feedback. Giovanni Manghi
02:28 AM Bug report #11953 (Closed): QGIS Crashes When Splitting a Vector Layer
closing for lack of feedback. Giovanni Manghi
02:28 AM Bug report #11953 (Closed): QGIS Crashes When Splitting a Vector Layer
closing for lack of feedback. Giovanni Manghi
02:27 AM Bug report #11629 (Closed): Merged LineStrings disappear
closing for lack of feedback. Giovanni Manghi
02:27 AM Bug report #11629 (Closed): Merged LineStrings disappear
closing for lack of feedback. Giovanni Manghi
02:26 AM Bug report #11565 (Closed): Impossible to import a WMS map
closing for lack of feedback. Giovanni Manghi
02:26 AM Bug report #11565 (Closed): Impossible to import a WMS map
closing for lack of feedback. Giovanni Manghi
02:25 AM Bug report #11919 (Closed): Calculation of areas in feet off by a factor of 10 in Illinois east p...
Giovanni Manghi
02:24 AM Bug report #12017 (Closed): cannot open georeferencer
closing for lack of feedback. Giovanni Manghi
02:24 AM Bug report #12017 (Closed): cannot open georeferencer
closing for lack of feedback. Giovanni Manghi
02:23 AM Bug report #11776 (Closed): Crash after delete single line
closing for lack of feedback. Giovanni Manghi
02:23 AM Bug report #11776 (Closed): Crash after delete single line
closing for lack of feedback. Giovanni Manghi
02:22 AM Bug report #5630 (Closed): After specifying a Target SRID with drag and drop, QGIS still opens th...
closing for lack of feedback. Giovanni Manghi
02:22 AM Bug report #5630 (Closed): After specifying a Target SRID with drag and drop, QGIS still opens th...
closing for lack of feedback. Giovanni Manghi
02:20 AM Bug report #11142 (Closed): Adding three shapefile layers when I add just one for QGIS 2.4.0
closing for lack of feedback. Giovanni Manghi
02:20 AM Bug report #11142 (Closed): Adding three shapefile layers when I add just one for QGIS 2.4.0
closing for lack of feedback. Giovanni Manghi
02:18 AM Bug report #8178 (Closed): Shifted raster: origin in qgis different than that reported by gdalinfo
closing for lack of feedback and because the general notion that layers that are not georeferenced should align is no... Giovanni Manghi
02:18 AM Bug report #8178 (Closed): Shifted raster: origin in qgis different than that reported by gdalinfo
closing for lack of feedback and because the general notion that layers that are not georeferenced should align is no... Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:12 AM Bug report #12719: QGIS crashes when 'Hide deprecated' enabled from Select datum transformations ...
confirmed also on master/linux. Was ok on previous qgis releases. Giovanni Manghi
02:01 AM Bug report #12256: Removing WFS layer from TOC crashes QGIS
to test use
http://wfs.ksdot.org/arcgis_web_adaptor/services/Accident/Accidents_WFS/MapServer/WFSServer?
Giovanni Manghi
02:00 AM Bug report #10966 (Closed): with OTFR on $area is always computed in square meters even if the CR...
merged with #12057 Giovanni Manghi
02:00 AM Bug report #10966 (Closed): with OTFR on $area is always computed in square meters even if the CR...
merged with #12057 Giovanni Manghi

2015-05-09

01:59 AM Bug report #12057: Computed area is wrong when reprojection is active
see also #10966 ("with OTFR on $area is always computed in square meters even if the CRS is in feet"). Giovanni Manghi
01:56 AM Bug report #12630 (Closed): Get sample query expression non-responsive for large PostGIS datasets
Fixed in changeset commit:"e509fc53ce5cfdb64b984177c5279a6cf7d8644c". Jürgen Fischer
01:40 AM Bug report #12290 (Feedback): proxy settings only works one time, and then QGIS "forgets" the set...
not reproducable here in master. Jürgen Fischer
01:40 AM Bug report #12290 (Feedback): proxy settings only works one time, and then QGIS "forgets" the set...
not reproducable here in master. Jürgen Fischer
01:39 AM Bug report #12312 (Closed): QGIS master crashed when adding a column to a layer with a joined csv
seems fixed in qgis master- Giovanni Manghi
01:39 AM Bug report #12312 (Closed): QGIS master crashed when adding a column to a layer with a joined csv
seems fixed in qgis master- Giovanni Manghi
01:30 AM Bug report #12397 (Closed): Qgis crashes when closing the program when project has just a simple ...
seems fixed on qgis master, please reopen if necessary. Giovanni Manghi
01:30 AM Bug report #12397 (Closed): Qgis crashes when closing the program when project has just a simple ...
seems fixed on qgis master, please reopen if necessary. Giovanni Manghi
01:27 AM Bug report #12461 (Open): Unable to commit date changes to MSSQL table in 2.8.1 Wien
Giovanni Manghi
01:27 AM Bug report #12450 (Open): Raster Calculator giving bogus values
Giovanni Manghi
01:23 AM Bug report #11546 (Closed): QGIS crash/close unexpectedly after some actions
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
01:23 AM Bug report #11546 (Closed): QGIS crash/close unexpectedly after some actions
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
01:20 AM Bug report #12413 (Closed): empty multilinestring causes crash
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
01:20 AM Bug report #12413 (Closed): empty multilinestring causes crash
closing for the lack of feedback, please reopen if necessary. Giovanni Manghi
01:18 AM Bug report #12253 (Open): WMTS When Zoomed Out Crashes QGIS
Giovanni Manghi
01:17 AM Bug report #11453 (Closed): Crash when zooming in too far with MSSQL spatial layer
Giovanni Manghi
01:16 AM Bug report #11453: Crash when zooming in too far with MSSQL spatial layer
Martin Dobias wrote:
> This may have been fixed with commit:b48e7fd3 - could you please test again?
closing for the ...
Giovanni Manghi
01:13 AM Bug report #12264 (Closed): Heatmap generated TIF with bad CRS
seems fixed in qgis master, please reopen if necessary. Giovanni Manghi
01:13 AM Bug report #12264 (Closed): Heatmap generated TIF with bad CRS
seems fixed in qgis master, please reopen if necessary. Giovanni Manghi
01:09 AM Bug report #12637 (Open): Primary key set to null when using Identify on layer or editing a child...
Jürgen Fischer
12:52 AM Bug report #12697 (Closed): Legend items name can be changed only for the first
tested also on Windows. Giovanni Manghi
12:52 AM Bug report #12697 (Closed): Legend items name can be changed only for the first
tested also on Windows. Giovanni Manghi
12:46 AM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
Sitansu Pattnaik wrote:
> Well I conducted a training for close to 60 people last week. In that group about 20 people...
Giovanni Manghi
12:45 AM Bug report #12409 (Closed): Creation of new mapsets does not work anymore
this issue was already fixed in qgis master. Giovanni Manghi
12:45 AM Bug report #12409 (Closed): Creation of new mapsets does not work anymore
this issue was already fixed in qgis master. Giovanni Manghi
09:32 PM Bug report #12409: Creation of new mapsets does not work anymore
same problem on mac yosemite (10.10.3)
using kyngchaos installers
Julio Novoa
01:37 PM Bug report #12713: when columns have the same name, styling with the first one does not work
Examination with ogrinfo shows that there are in fact 2 columns with same name "Calculated" (and with different value... Even Rouault
01:34 PM Bug report #12708 (Closed): After a successful installation on archlinux - QGIS can't find libqwt...
set LD_LIBRARY_PATH to /usr/lib/qwt or add it to /etc/ld.config and run ldconfig. Jürgen Fischer
01:34 PM Bug report #12708 (Closed): After a successful installation on archlinux - QGIS can't find libqwt...
set LD_LIBRARY_PATH to /usr/lib/qwt or add it to /etc/ld.config and run ldconfig. Jürgen Fischer
12:59 PM Bug report #12725 (Closed): GRASS datasources always have absolute paths in QGIS project
Fixed in changeset commit:"e5dbd186d8f185174ac5fc8fd152e586aa9925f0". Jürgen Fischer
12:11 PM Bug report #12690 (Open): Snapping do not work for new features after save edits on oracle spatia...
Giovanni Manghi
12:10 PM Bug report #12699 (Closed): Plugin Manager : Installed plugins list is not sorted
Giovanni Manghi
12:08 PM Feature request #12249: Editor Toolbar similar to ArcGIS
Irucka Embry wrote:
> Thank you, I have checked out the toolbar.
so can we close this?
Giovanni Manghi
03:41 AM Bug report #12727 (Closed): Openstreetmap Import to spatialite incomplete
From the QGIS user mailing list http://osgeo-org.1560.x6.nabble.com/OSM-data-gaps-td5204902.html and http://osgeo-org... Andre Joost

2015-05-08

01:34 AM Bug report #12725 (Closed): GRASS datasources always have absolute paths in QGIS project
I've noticed that in a QGIS project with "Save paths" set to "relative", datasources are still absolute for GRASS dat... Joeri Theelen
06:49 PM Feature request #12250: Ability to load R packages and easily execute custom R scripts without Py...
Thank you for your note about the ability to run any R scripts from QGIS. I originally posted this feature request be... Irucka Embry
06:49 PM Feature request #12250: Ability to load R packages and easily execute custom R scripts without Py...
Thank you for your note about the ability to run any R scripts from QGIS. I originally posted this feature request be... Irucka Embry
08:29 AM Feature request #12250: Ability to load R packages and easily execute custom R scripts without Py...
Irucka Embry wrote:
> Hi, would it be possible to use rpy2 (http://rpy.sourceforge.net/) to have the interface to R?
...
Giovanni Manghi
05:42 AM Feature request #12250: Ability to load R packages and easily execute custom R scripts without Py...
Hi, would it be possible to use rpy2 (http://rpy.sourceforge.net/) to have the interface to R?
I know that SageMath ...
Irucka Embry
02:32 PM Feature request #12724 (Closed): Add GeoPackage to "Save Vector Layer as..."
Jürgen Fischer
12:07 PM Feature request #12724: Add GeoPackage to "Save Vector Layer as..."
Sorry. I did'nt find my other Feature request #12187 before. Should be merged then. Sfkeller -
12:04 PM Feature request #12724 (Closed): Add GeoPackage to "Save Vector Layer as..."
GeoPackage 1.0 (*.gpkg) is supported by OGR with a read/write driver.
And GeoPackage is already built into the "Add V...
Sfkeller -
08:43 AM Bug report #12704 (Closed): Vector layer scatterplot: resulting graph not loaded in Windows
Fix confirmed, thanks. Paolo Cavallini
08:43 AM Bug report #12704 (Closed): Vector layer scatterplot: resulting graph not loaded in Windows
Fix confirmed, thanks. Paolo Cavallini
02:05 AM Bug report #12704: Vector layer scatterplot: resulting graph not loaded in Windows
Paolo, please check if it was fixed with commit:12d92e4fb4dc772ae568b0f3b1f47c4b41b6aa2f Radoslaw Guzinski
08:26 AM Feature request #12722 (Feedback): Allow copy/paste of columns between tables also when columns d...
the columns do have the same datatype and name? Giovanni Manghi
08:26 AM Feature request #12722 (Feedback): Allow copy/paste of columns between tables also when columns d...
the columns do have the same datatype and name? Giovanni Manghi
03:06 AM Feature request #12722 (Feedback): Allow copy/paste of columns between tables also when columns d...
*new description:*
#12722-6
*
old description:*
I have a number of projects where I am combining several tabl...
Patrick Dunford

2015-05-07

01:43 AM Feature request #12720 (Rejected): Select -all- OSM topology to spatial Lite
Vector -> Open Street Map -> Topology to spatial Lite
it would be great if there was a button for "select ALL tags" ...
Mo Scott
01:41 AM Bug report #12719 (Closed): QGIS crashes when 'Hide deprecated' enabled from Select datum transfo...
When I add a layer to my project whose CRS is different from the project CRS (OTF CRS on), I'm prompted for the Datum... Steve Pritchard
01:26 AM Bug report #12718 (Closed): Constant reload of map when reducing window size
Under Ubuntu Laptop when you resize the QGis-Window under a certain extend (but latest at half-window-view) the map-o... Mo Scott
09:49 PM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
A sample image which caused the problem:
https://drive.google.com/file/d/0B_ZSxE5g2YppVV9DcTRnM2VCeVk/view?usp=sharin...
Sitansu Pattnaik
07:56 PM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
Well I conducted a training for close to 60 people last week. In that group about 20 people had this problem. I have ... Sitansu Pattnaik
01:45 PM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)
Just a note that I have this problem as well. I've tried installing all of the released versions from 2.2 through 2.... Luke Roth
07:54 PM Feature request #12249: Editor Toolbar similar to ArcGIS
Thank you, I have checked out the toolbar. Irucka Embry
07:54 PM Feature request #12249: Editor Toolbar similar to ArcGIS
OK, thank you for letting me know about the Editor toolbar (called "Digitizing"). I will check it out. Irucka Embry
07:52 PM Feature request #12251: ArcGIS Joins (spreadsheets, tables, etc.)
With the question that I posted, I am referring to a workbook (with possibly many worksheets) and not a single table/... Irucka Embry
04:14 PM Bug report #12717 (Closed): Trunk build fails on qgscomposerscalebar.cpp
Fixed in changeset commit:"2c3855267ee29e4ee1113de270a7a9dc001a4f61". Jürgen Fischer
03:46 PM Bug report #12717 (Closed): Trunk build fails on qgscomposerscalebar.cpp
Below is the relevant build output on trying to build trunk on OS X:... John Tull
03:46 PM Bug report #12674 (Closed): Add Oracle Spatial Layer
Fixed in changeset commit:"656af530c3fa9353e35a812f880350e01f37ebc0". Jürgen Fischer
02:01 AM Bug report #12674 (Feedback): Add Oracle Spatial Layer
does this happen only when opening/saving existing projects created in 2.6 or also in new projects? does it affects b... Giovanni Manghi
02:17 PM Feature request #12693: option to have the label color automatically match the polygon color
I honestly don't know enough to know where to draw the line between where plugin vs direct functionality lies. I've ... Cris Jesse
10:20 AM Bug report #12697: Legend items name can be changed only for the first
Tried again on Linux, and I agree with you. Must have been a local issue, or one with Windows (unchecked). If it work... Paolo Cavallini
02:04 AM Bug report #12697 (Feedback): Legend items name can be changed only for the first
seems to work fine on master or I have not understand correctly the issue. Giovanni Manghi
10:05 AM Bug report #12713 (Open): when columns have the same name, styling with the first one does not work
*new description:*
#12713-3
*old description:*
This file:
http://www.faunalia.eu/~paolo/qgis/result.zip
...
Paolo Cavallini
09:43 AM Bug report #12699: Plugin Manager : Installed plugins list is not sorted
Weird. After I report this issue, I'm no more able to reproduce it. All goes well.
May be closed and set as invalid u...
Harrissou Santanna
09:18 AM Bug report #12712 (Closed): Composer map doesn't rotate when angle is set using "data define over...
Create a print composer
Add a composer map
In its main properties, add a value in the map rotation spinbox. The map...
Harrissou Santanna
09:16 AM Bug report #12695 (Closed): GDAL Rasterize does not rasterize vectors with field 0
Paolo Cavallini
09:16 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
Fixed with commit:fb141e76feb45ee544136b78b356d55e6b19b587
Thanks.
Paolo Cavallini
02:05 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
maybe is better to change the default type to int16? Giovanni Manghi
08:43 AM Bug report #12690: Snapping do not work for new features after save edits on oracle spatial layer
my tests:
in qgis 2.2 this was no issue
in qgis 2.4 this was no issue
in qgis 2.6 this was no issue
Jan Lippmann
07:55 AM Bug report #12683: Processing refactor fields: python error on unhandeld field types
of course... thanks! Giovanni Manghi
07:54 AM Bug report #12683 (Closed): Processing refactor fields: python error on unhandeld field types
Giovanni Manghi
03:29 AM Bug report #12683: Processing refactor fields: python error on unhandeld field types
see
https://github.com/qgis/QGIS/pull/2033
Giovanni Manghi
06:15 AM Bug report #12696: Composer Manager - Label rotation
Hi,
I think it's rather about text added to print composer (such as title, source...) than labelling.
The "Rotation"...
Harrissou Santanna
05:39 AM Bug report #12711 (Closed): Error when opening more than one form with init function
Hello,
when I open more than one form dialog on a layer with a Python init function, I have the following error mess...
Médéric RIBREUX
05:25 AM Feature request #8995 (Closed): [composer] Size of scale bar bloated (problem for Atlas, LizMap, ...
Fixed in changeset commit:"45bdae461dc64cbc3e7224b13da5a3cbddf89492". Sandro Mani
03:52 AM Bug report #12594 (Closed): Sample R scripts for Processing (Home Range Analysis) do not work
script removed (for now). Giovanni Manghi
03:52 AM Bug report #12594 (Closed): Sample R scripts for Processing (Home Range Analysis) do not work
script removed (for now). Giovanni Manghi
03:16 AM Bug report #12594 (Feedback): Sample R scripts for Processing (Home Range Analysis) do not work
this scripts are broken anyway, see
https://github.com/qgis/QGIS/pull/2032
so I guess this can be closed (when the...
Giovanni Manghi
02:37 AM Bug report #12680 (Open): DBManager don't recognize a PostGIS geography table (or view) as geomet...
Giovanni Manghi
02:33 AM Bug report #12680: DBManager don't recognize a PostGIS geography table (or view) as geometrical
Yes Giovanni,
these tables/views are correctly recognized as geometrical by "add postgis layer" or QGis Browser.
Marco Li Volsi

2015-05-06

01:58 AM Bug report #12696 (Feedback): Composer Manager - Label rotation
if you want to show upside down labels you must use the proper option in labelling > rendering, isn't this what you a... Giovanni Manghi
01:58 AM Bug report #12696 (Feedback): Composer Manager - Label rotation
if you want to show upside down labels you must use the proper option in labelling > rendering, isn't this what you a... Giovanni Manghi
01:47 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
Got it, thanks. Perhaps a better default could be chosen for nulls? Paolo Cavallini
01:24 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
I tested on both QGIS master and 2.8.1 on both Linux and Windows and in all cases, with the provided vector, there ar... Giovanni Manghi
01:44 AM Bug report #12690: Snapping do not work for new features after save edits on oracle spatial layer
was this an issue on previous qgis releases? Giovanni Manghi
01:41 AM Bug report #12680 (Feedback): DBManager don't recognize a PostGIS geography table (or view) as ge...
this tables do show using the "add postgis layer" dialog or the qgis browser? Giovanni Manghi
01:39 AM Bug report #12625 (Feedback): Difficult to set value in drop down list in table column
Patrick Dunford wrote:
> This is still observed in 2.9.0
could please make and attach a screencast that shows the is...
Giovanni Manghi
01:39 AM Bug report #12625 (Feedback): Difficult to set value in drop down list in table column
Patrick Dunford wrote:
> This is still observed in 2.9.0
could please make and attach a screencast that shows the is...
Giovanni Manghi
01:35 AM Bug report #12701 (Feedback): QGIS crashes when trying to add ODBC new layer
Does it happens with previous qgis releases? Giovanni Manghi
01:35 AM Bug report #12701 (Feedback): QGIS crashes when trying to add ODBC new layer
Does it happens with previous qgis releases? Giovanni Manghi
01:35 AM Bug report #12701 (Feedback): QGIS crashes when trying to add ODBC new layer
Does it happens with previous qgis releases? Giovanni Manghi
08:34 AM Bug report #12701 (Closed): QGIS crashes when trying to add ODBC new layer
QGIS crashes (program closes) when attempting to add a new layer from ODBC Data Base connection.
I try to establish a...
Joan Molinas
01:33 AM Bug report #12710 (Closed): Processing: r.covar echoes the command to the Result window
not producing html formatted output Paolo Cavallini
01:31 AM Feature request #12709 (Closed): Ability to resize Handle Bad Layers window QGIS 2.8.1
An option to resize the "handle bad layers" window would be nice. I often have problems finding layers when I decide ... Lars Scharfenberg
01:22 AM Bug report #11603 (Closed): R library can't install on windows in Processing
The PR was merged. Giovanni Manghi
01:22 AM Bug report #11603 (Closed): R library can't install on windows in Processing
The PR was merged. Giovanni Manghi
01:20 AM Bug report #12700: Attribute table : rows are higher than needed (hidpi)
not sure if this change was by design or the result of the fixes for high resolution screens. Giovanni Manghi
02:33 AM Bug report #12700 (Closed): Attribute table : rows are higher than needed (hidpi)
In previous versions, the rows in attribute table fits the height of the content (even better on MACOS X than Windows... Harrissou Santanna
01:17 AM Feature request #12693 (Feedback): option to have the label color automatically match the polygon...
In general seems to me that this request would be better fitted for a plugin rather than a tool available directly in... Giovanni Manghi
02:00 PM Feature request #12693: option to have the label color automatically match the polygon color
lol, thankfully no I did not set all those colors manually. I simply went to:
Layers Properties
> Style (tab)
> > ...
Cris Jesse
02:07 AM Feature request #12693: option to have the label color automatically match the polygon color
Did u set your color manually? all 1400? wouaw...
I don't think There is currently _a graphic way_ to automatically m...
Harrissou Santanna
02:24 PM Bug report #12057: Computed area is wrong when reprojection is active
I can confirm this issue on Windows 7, QGIS 2.8.1 and 2.6.1 (both 32bit). In addition I had a very similar issue with... Stefan Blumentrath
11:52 AM Bug report #12708 (Closed): After a successful installation on archlinux - QGIS can't find libqwt...
Hi,
After a successful installation on archlinux - QGIS can't find libqwt.so.6...
Shai Efrati
09:20 AM Feature request #12707 (Open): Avoid too similar colours in the same project
When loading layers a random colour is assigned to each. Quite often it happens that the colours are rather similar, ... Paolo Cavallini
09:10 AM Bug report #12706 (Closed): Batch in Processing: wrong column width
By default, columns for input and output are very narrow, and the last one (Load in QGIS) takes up much space.
Most w...
Paolo Cavallini
09:05 AM Bug report #12705 (Closed): Vector layer scatterplot: inverted axes
X axis is displayed vertical, Y horizontal Paolo Cavallini
09:03 AM Bug report #12704 (Closed): Vector layer scatterplot: resulting graph not loaded in Windows
Only the <img etc is displayed, with the correct path where one could find the png. Paolo Cavallini
09:01 AM Bug report #12703 (Closed): Help for all SAGA processing modules missing
Some modules have an available help, but this is not displayed in the Help tab (it used to be) Paolo Cavallini
08:59 AM Bug report #12702 (Closed): Help for all qgis:graphics missing
Message:
The requested URL /2.6/en/docs/user_manual/processing_algs/qgis/graphics/barplot.html was not found on this ...
Paolo Cavallini
05:27 AM Bug report #12672 (Closed): SAGA Kriging in QGIS is slower than in SAGA itself
When calling from QGIS there is a need for more operations, since SAGA does not generate results in formats compatibl... Victor Olaya
02:24 AM Bug report #12699 (Closed): Plugin Manager : Installed plugins list is not sorted
In Plugin Manager, unlike the other tabs, the Installed tab shows the list of plugins in a weird order. Should better... Harrissou Santanna

2015-05-05

12:21 AM Bug report #12691 (Closed): Path names with ' and " give problems when saving projects
Fixed in changeset commit:"b49b49232a598ac22b60be398e5d8e125b53a3d6". Jürgen Fischer
01:59 PM Feature request #12693: option to have the label color automatically match the polygon color
I was able to find the EasyCustomLabelling, but I still could not figure out how to pull the colors from the project-... Cris Jesse
01:26 PM Feature request #12693: option to have the label color automatically match the polygon color
Adding in shadows, backgrounds, buffers, etc would take care of not being able to see the matching colors.
I did i...
Cris Jesse
08:04 AM Feature request #12693: option to have the label color automatically match the polygon color
Hi,
Wouldn't it be hard to read red label on red polygon, yellow label inside yellow polygon and so on...?
Do you kn...
Harrissou Santanna
10:32 AM Bug report #11603: R library can't install on windows in Processing
Please have a look at: https://github.com/qgis/QGIS/pull/2028 (pull request 2022 has been closed).
This new pull requ...
Stefan Blumentrath
09:55 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
See: https://github.com/qgis/QGIS-Documentation/tree/master/source/docs/training_manual/exercise_data/processing/extents Paolo Cavallini
07:50 AM Feature request #12698 (Closed): Add "crop" function to Printing layout
When resizing a map in Print layout, this is automatically resized (zoomed). It would be good if a modifier (Ctrl?) c... Paolo Cavallini
07:26 AM Bug report #12396 (Closed): Dependencies issue with python-qgis on Ubuntu-Gnome 14.04.2
This issue seems to be fixed since an update of ubuntu 14.04.2. Installation works now properly. Maxime Jay-Allemand
06:53 AM Bug report #12697 (Closed): Legend items name can be changed only for the first
Names for individual classes in a thematic map can be changed in Print composer > Legend. However, only the changes o... Paolo Cavallini
04:46 AM Bug report #8212 (Closed): style manager searching finds non-related elements
Fixed in changeset commit:"09675101452bdd1cde8dfdf4c7482164eca0be3b". Nathan Woodrow
02:11 AM Bug report #12696 (Closed): Composer Manager - Label rotation
Place a label and try to rotate it counter-clockwise. It is not possible since the rotation angle does not accept neg... Vassilios Grigoriadis

2015-05-04

01:25 AM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
Paolo Cavallini wrote:
> Done with the basins from exercise data.
> Thanks.
if you mean the training manual exercise...
Giovanni Manghi
10:14 PM Bug report #12695: GDAL Rasterize does not rasterize vectors with field 0
Done with the basins from exercise data.
Thanks.
Paolo Cavallini
01:46 PM Bug report #12695 (Feedback): GDAL Rasterize does not rasterize vectors with field 0
Cannot confirm on qgis master. Please attach sample data. Giovanni Manghi
01:46 PM Bug report #12695 (Feedback): GDAL Rasterize does not rasterize vectors with field 0
Cannot confirm on qgis master. Please attach sample data. Giovanni Manghi
12:39 PM Bug report #12695 (Closed): GDAL Rasterize does not rasterize vectors with field 0
All records are rasterized, except those with value of the selected field = 0. This seems inappropriate Paolo Cavallini
01:14 AM Bug report #12690: Snapping do not work for new features after save edits on oracle spatial layer
The problem there is also at point and line features.
if i restart the qgis project. snapping is working for all feat...
Jan Lippmann
03:36 AM Bug report #12690: Snapping do not work for new features after save edits on oracle spatial layer
correct. does not happen with postgis oder mssql layer. but with oracle spatial...*all 3rd party plugins are disabled... Jan Lippmann
02:54 AM Bug report #12690 (Feedback): Snapping do not work for new features after save edits on oracle sp...
does not happen with postgis layers. Maybe a side effect of some 3rd party plugin? could you disable them and try aga... Giovanni Manghi
03:34 PM Bug report #12694 (Closed): Incorrect reading of OziExplorer .map raster projection file
Already fixed in master and will be fixed in 2.8.2 Nyall Dawson
03:34 PM Bug report #12694 (Closed): Incorrect reading of OziExplorer .map raster projection file
Already fixed in master and will be fixed in 2.8.2 Nyall Dawson
11:01 AM Bug report #12694 (Closed): Incorrect reading of OziExplorer .map raster projection file
In our office we were loading a .png raster image that had an associated .JPR and .map georeferencing files. When lo... David Mancini
12:34 PM Bug report #8511 (Open): Iterations: autofill mode fills the output name in a wrong way under Linux
Confirmed, just now. Paolo Cavallini
12:34 PM Bug report #8511 (Open): Iterations: autofill mode fills the output name in a wrong way under Linux
Confirmed, just now. Paolo Cavallini
11:35 AM Bug report #12680: DBManager don't recognize a PostGIS geography table (or view) as geometrical
Hy Anita.
I have PostGIS "2.1 USE_GEOS=1 USE_PROJ=1 USE_STATS=1" version on "PostgreSQL 9.4.0, compiled by Visual C++...
Marco Li Volsi
10:07 AM Bug report #12680: DBManager don't recognize a PostGIS geography table (or view) as geometrical
Did you add an entry into geometry_columns with metadata for the view?
Please add more detail to the description.
Anita Graser
10:21 AM Feature request #12693: option to have the label color automatically match the polygon color
Ideally we would still want to be able to edit other parts of the label formats as well, such as size, adding shadow,... Cris Jesse
10:18 AM Feature request #12693 (Closed): option to have the label color automatically match the polygon c...
Sorry if this is already available, I couldn't find anything for it. I have projects that come up from time to time ... Cris Jesse
10:05 AM Bug report #12670 (Closed): Problem with the print project
This seems to be a support request rather than a bug report. Anita Graser
10:05 AM Bug report #12670 (Closed): Problem with the print project
This seems to be a support request rather than a bug report. Anita Graser
10:00 AM Bug report #12692: Identify for inverted polygon: please select the interior
From a UX perspective I certainly agree that identify highlights should be consistent independent of the configured r... Anita Graser
09:16 AM Bug report #12692 (Closed): Identify for inverted polygon: please select the interior
he Identify tool works in a strange (to me) way for inverted polygons: you have to click inside the polygon, but then... Paolo Cavallini
07:24 AM Bug report #12625 (Reopened): Difficult to set value in drop down list in table column
This is still observed in 2.9.0
Patrick Dunford
05:03 AM Bug report #12691 (Closed): Path names with ' and " give problems when saving projects
When saving a project in a folder containing an ' the following error is given
`
An error occured during execution of...
Christian Christelis
03:30 AM Bug report #11863 (Closed): invalid sld for graduated style on field with negative values
Fixed in changeset commit:"f800ac635b9f98d53becb721a1fd8f27c233a55c". Martin Dobias
02:40 AM Bug report #12686: layer.featureAdded triggered on Feature Attribute Dialog confirm
It may be that this is how it is designed to work?
I updated to my code in the function connected to featuredAdded ...
Andrew McClure
02:27 AM Bug report #12606: URL format in request DescribeFeature, && in URL request.
Peder Dalin wrote:
> Thanks for the answer.
>
> I have done some more research in this case. The web request in the ...
Giovanni Manghi
02:25 AM Bug report #12682 (Feedback): Deleting Features from Shapefiles on Network Drives
Giovanni Manghi

2015-05-03

01:10 AM Bug report #12690 (Closed): Snapping do not work for new features after save edits on oracle spat...
Snapping do not work for new features after save edits on oracle spatial
steps:
1. start editing a oracle spatial po...
Jan Lippmann
11:40 PM Feature request #4255 (Closed): Diagram overlays & print composer: add option to add legend for d...
Fixed in changeset commit:"72cfe46f6a5844c113a74b762710964a341fa3bd". Vincent Mora
04:23 PM Feature request #12688: relative paths in image source expression
The expression parser isn't going to know if @'qr/'@ is a string or a path, making it guess would be a bad thing.
...
Nathan Woodrow
03:56 PM Feature request #12688 (Closed): relative paths in image source expression
I have an atlas with a QR code on each page. the qr codes are jpg images stored in a folder relative to the project r... Jesse McMillan
04:00 PM Feature request #12689 (Open): Add option for "Save as Image" to create a georeferenced file
Currently both the TIF and TIFF options for Project/Save as Image only create TIFF file with world file (.tif/.tifw o... Michael Sumner
03:46 PM Feature request #12687 (Open): save custom functions in project file
I use the function builder tab in the expression string builder to get the current document path using a python strin... Jesse McMillan
02:27 PM Bug report #11603: R library can't install on windows in Processing
Added a preliminary quick fix (comparable to Takayuki Mizutans solution) in https://github.com/qgis/QGIS/pull/2022
Ye...
Stefan Blumentrath
01:46 PM Bug report #12686: layer.featureAdded triggered on Feature Attribute Dialog confirm
This may be part of the problem. On Ubuntu I get the error:
Warning: QUndoStack::endMacro(): no matching beginMacro(...
Andrew McClure
09:31 AM Bug report #12686: layer.featureAdded triggered on Feature Attribute Dialog confirm
When I don't connect the signal featureAdded, a new feature is created with the correct values from the dialog, but t... Andrew McClure
09:21 AM Bug report #12686 (Closed): layer.featureAdded triggered on Feature Attribute Dialog confirm
Use case:
Select a vector (point) layer
Make it editable
Select a feature (opens feature Dialog in edit mode if au...
Andrew McClure
04:03 AM Bug report #12631: QgsSnapper.snapToCurrentLayer() not working anymore in QGIS 2.8
I'm encountering the same problem, and indeed, it breaks plugins. To clarify it is QgsMapCanvasSnapper.snapToCurrentL... cmoe -

2015-05-01

02:26 PM Bug report #10729 (Closed): R scripts failing due to writing permissions failure in windows
Duplicate to: #11603 Stefan Blumentrath
02:26 PM Bug report #11603: R library can't install on windows in Processing
Sounds like a good (in terms of convenient for the user) solution could be to add the possibility to specify R_LIBS_U... Stefan Blumentrath
11:12 AM Bug report #12411: First call to GetCapabilities after copy of the same .qgs file crashes QGIS Se...
James Keener wrote:
> It seems that the rest of the functions in src/server/qgsserverprojectparser.cpp check if
> `m...
Jürgen Fischer
08:17 AM Bug report #12411: First call to GetCapabilities after copy of the same .qgs file crashes QGIS Se...
It seems that the rest of the functions in src/server/qgsserverprojectparser.cpp check if
`mXMLDoc` is null (or rath...
James Keener
08:04 AM Bug report #12411: First call to GetCapabilities after copy of the same .qgs file crashes QGIS Se...
I attached gdb to the apache with mod_fcgid qgis_mapserv.fcgi process on an ubunutu 14.04.2 VM. I then updated the q... James Keener
08:09 AM Feature request #12684: QGIS should backup settings before save
Hi, that's strange, here ini files are saved at every change. On what platform are you working? Did you configure a -... Regis Haubourg
08:01 AM Bug report #12682: Deleting Features from Shapefiles on Network Drives
Hi,
could you share a shape example before / after editing?
Are you editing shp concurrently ? In this case, there ...
Regis Haubourg

2015-04-30

08:48 AM Feature request #12684 (Open): QGIS should backup settings before save
As per title - QGIS app should make a backup copy of settings file(s) before writing out a new configuration.
Ration...
marisn -
08:08 AM Bug report #12683 (Closed): Processing refactor fields: python error on unhandeld field types
Hello,
I am facing errors when I try to use the "refactor fields" algorithm on some Oracle and SQLite layers.
It se...
Médéric RIBREUX
07:49 AM Bug report #12682 (Closed): Deleting Features from Shapefiles on Network Drives
We are a small GIS department of 4 folks working with a shape file composed of points. We have local installs (C:) of... Miles Shugar
06:55 AM Feature request #12675: Arcs are not displayed from an Oracle spatial layer
Arcs are currently not supported in QGIS (see also "QEP !#8":https://github.com/mhugent/QGIS-Enhancement-Proposals/bl... Jürgen Fischer
05:49 AM Feature request #12675 (Closed): Arcs are not displayed from an Oracle spatial layer
All the features (areas and lines) from an Oracle spatial layer containing arcs are not displayed in QGIS 2.8 and ear... Rene Mueller
06:39 AM Feature request #12681 (Closed): Add a search bar in the "Configure Shortcuts" Dialog
All is in the title.
As the actions listed in the shortcuts dialog become wider (and more if you install some plugins...
Harrissou Santanna
06:20 AM Bug report #12680 (Closed): DBManager don't recognize a PostGIS geography table (or view) as geom...
DBManager don't recognize a PostGIS geography table (or view) as geometrical, but only alphanumerical Marco Li Volsi
06:20 AM Bug report #12679 (Open): atlas generation : output filename textbox with default expression afte...
Enable atlas generation in a print composer
set any options you want and erase the output filename expression.
Whil...
Harrissou Santanna
06:05 AM Bug report #12677: Zoom to layer on PostGIS Table with geography type
I have found that also on PostGIS Views Marco Li Volsi
05:59 AM Bug report #12677 (Closed): Zoom to layer on PostGIS Table with geography type
"Zoom to layer" button does not perform when applied on a PostGIS layer with geography type.
The same problem happens...
Marco Li Volsi
06:04 AM Bug report #12678 (Closed): coverage layer not checked before parsing filename expression in atla...
Enable "atlas generation" in a new print composer
Erase the content of fileName expression
And launch atlas export ...
Harrissou Santanna
05:56 AM Bug report #12676 (Closed): Subforms with Python init function crash when adding values
Hello,
I am not anymore able to use subforms (based on project relations) which have a Python init function.
When tr...
Médéric RIBREUX
05:41 AM Bug report #12674 (Closed): Add Oracle Spatial Layer
After entering the details for the oracle connection and testing it successfully, all the tables of the database are ... Rene Mueller
04:48 AM Feature request #12673 (Closed): when creating a composer, show a *sorted* list of existing print...
Open a project with existing print composers.
Open Composer Manager and add a new composer
In the prompted dialog, th...
Harrissou Santanna
04:26 AM Feature request #12667: Pause snapping during editing session
Hi,
+1. Totally agree...
Harrissou Santanna
04:12 AM Bug report #12670: Problem with the print project
I'll answer in french
Bonjour Thibault,
Pour le problème avec la grille, as-tu pensé à définir un pas (intervalle) p...
Harrissou Santanna
02:06 AM Bug report #12672 (Closed): SAGA Kriging in QGIS is slower than in SAGA itself
The interpolating tool (saga ordinary kriging) is very slow in QGIS. It took 30 minutes in QGIS to interpolate a shap... Marcel Foelsch

2015-04-29

01:27 AM Bug report #12671 (Closed): Cursor icon is too small on HiDPI screen
Cursor icon size is hardcoded to 16x16 in many parts of the code (for example: https://github.com/qgis/QGIS/blob/mast... Alessandro Pasotti
12:02 AM Bug report #12649: inconsistencies in editing tools when working on a postgis layer without prima...
I asked because it's the foundation for the decision if the tools should be enabled or not :)
In this case I agree t...
Matthias Kuhn
06:04 AM Bug report #12649 (Open): inconsistencies in editing tools when working on a postgis layer withou...
Hi,
Matthias Kuhn wrote:
> Do you have an idea how to modify (send an update to the db) an existing feature without ...
Giovanni Manghi
05:31 AM Bug report #12649 (Feedback): inconsistencies in editing tools when working on a postgis layer wi...
Do you have an idea how to modify (send an update to the db) an existing feature without a primary key? Matthias Kuhn
02:38 PM Bug report #12623: Project templates should be stored relative to config folder
The same applies to a lot of settings related to Processing (e.g. paths to providers like SAGA or GRASS) and also mod... Stefan Blumentrath
11:48 AM Bug report #12643 (Open): Processing convex hull does not work
here it fails with any input, test attached point shapefile Giovanni Manghi
11:48 AM Bug report #12643 (Open): Processing convex hull does not work
here it fails with any input, test attached point shapefile Giovanni Manghi
11:42 AM Bug report #12646 (Open): Split RGB bands stopped to work in latest Processing releases
Giovanni Manghi
11:41 AM Bug report #12646: Split RGB bands stopped to work in latest Processing releases
on Linux (qgis master) I get
A iniciar o algoritmo Split RGB bands...
/home/giovanni/.qgis2//processing/saga_batch_...
Giovanni Manghi
10:35 AM Bug report #12670 (Closed): Problem with the print project
Hello,
First sorry for my english, it's a little bad. I'll try to explain my problem in english but i put a french e...
delinte thibault
05:37 AM Bug report #12629: Vector Layer TranslateFeatures performance (2.8.1 vs 1.8.0)
You can also play with the following snippet:... Matthias Kuhn
05:28 AM Bug report #12629: Vector Layer TranslateFeatures performance (2.8.1 vs 1.8.0)
Can you check if it helps to group it in a single undo command.
I.e. compare the result of the following two snippets...
Matthias Kuhn
05:33 AM Bug report #12627 (Closed): Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP
Matthias Kuhn
04:55 AM Bug report #12668 (Feedback): Edit widget properties not saved
Matthias Kuhn
04:55 AM Bug report #12668: Edit widget properties not saved
> Closing the workspace down and reopening it
Did you save and reload the project? That's where the settings are saved.
Matthias Kuhn
02:20 AM Bug report #12669 (Closed): Could not snap to a segment on the current layer
I'm getting the error "Could not snap to a segment on the current layer" when trying to select a POINT feature in a P... Sandro Santilli

2015-04-28

01:33 AM Bug report #12665 (Closed): pyodbc DLL issue in 32-bit standalone
duplicate of #12489 Jürgen Fischer
01:33 AM Bug report #12665 (Closed): pyodbc DLL issue in 32-bit standalone
duplicate of #12489 Jürgen Fischer
01:33 AM Bug report #12665 (Closed): pyodbc DLL issue in 32-bit standalone
duplicate of #12489 Jürgen Fischer
08:10 AM Bug report #12665 (Closed): pyodbc DLL issue in 32-bit standalone
pyodbc distributed with the 32-bit Windows standalone version fails to load. This appears to be related to the way it... Gary Sherman
01:30 AM Bug report #12668 (Closed): Edit widget properties not saved
If I set a layer up with edit widget properties anything other than "Text Edit" this remains saved only as long as th... Edward Rollason
12:55 AM Feature request #12667 (Feedback): Pause snapping during editing session
It would be very useful to be able to dynamically pause snapping during an edit session to allow creation of vertices... Edward Rollason
11:44 PM Bug report #11070 (Closed): Handle bad layers - Working WMS-layers uncorrect seen as bad
Filip Mahieu
02:18 PM Bug report #12637: Primary key set to null when using Identify on layer or editing a child table.
I've also uploaded a PDF that shows what happens in the attribute table. cgsbob -
08:56 AM Bug report #12542: Processing: better naming structure for output
Glad you agree. Have you checked what I have done so far? Agreed with that? Main stuff missing is GRASS, where both 6... Paolo Cavallini
08:46 AM Bug report #12586: Processing field calculator allows no_value for column name
Fine, thanks. Would you mind backporting it, so it will go to 2.8.2? Paolo Cavallini
08:20 AM Bug report #12610: QGIS not showing WMS legend while LegendURL is present
More specific: QGis blocks when effectively adding the legend in the composer. You see in attachment what you get aft... Filip Mahieu
08:10 AM Bug report #12610: QGIS not showing WMS legend while LegendURL is present
We do have a similar error here. When loading the WMS url=http://wms.agiv.be/ogc/wms/omkl&layers=Ortho&format=image/p... Filip Mahieu
07:51 AM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP
ArcMap gives this error message when it fails to read the shapefile exported by QGIS:
> ArcMap Drawing Errors
> One ...
Marc Hurst
05:38 AM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP
I have not personally seen the error message. I asked my associates for a transcript; but I have not received it.
Ye...
Marc Hurst
05:51 AM Bug report #11646 (Closed): Size bug in custom UI forms displaying sub-forms
Hello,
As of QGIS 2.8.1, the bug is fixed ! No need to resize the sub-forms anymore.
Thanks to whoever has fixed th...
Médéric RIBREUX
05:51 AM Bug report #11646 (Closed): Size bug in custom UI forms displaying sub-forms
Hello,
As of QGIS 2.8.1, the bug is fixed ! No need to resize the sub-forms anymore.
Thanks to whoever has fixed th...
Médéric RIBREUX
05:50 AM Bug report #11647 (Closed): Collapse bug for custom form sub-forms
Hello,
it seems that somebody has fixed the bug in QGIS 2.8.1: I can't reproduce it anymore...
Well thank you very ...
Médéric RIBREUX
05:50 AM Bug report #11647 (Closed): Collapse bug for custom form sub-forms
Hello,
it seems that somebody has fixed the bug in QGIS 2.8.1: I can't reproduce it anymore...
Well thank you very ...
Médéric RIBREUX
03:34 AM Bug report #12549: QGIS GUI scaling issues on retina display
Thanks heaps. Question: Do we have to wait for QT5 to get true scaling of the application on HiDPI? i.e icon, fonts, ... Jeremy Palmer
02:35 AM Bug report #12606: URL format in request DescribeFeature, && in URL request.
Thanks for the answer.
I have done some more research in this case. The web request in the QGIS log and the actual H...
Peder Dalin

2015-04-27

01:51 AM Bug report #12549: QGIS GUI scaling issues on retina display
fixed in commit:15c1dbc Jürgen Fischer
01:49 AM Bug report #12549 (Closed): QGIS GUI scaling issues on retina display
Fixed in https://github.com/qgis/QGIS/pull/2014 Alessandro Pasotti
01:43 AM Bug report #12549: QGIS GUI scaling issues on retina display
This is an attempt to fix this issue:
https://github.com/qgis/QGIS/pull/2014
Alessandro Pasotti
01:50 AM Bug report #11337: Attribute Table does not show correctly on high resolution (2880x1620) monitors
fixed in commit:15c1dbc Jürgen Fischer
01:49 AM Bug report #11337 (Closed): Attribute Table does not show correctly on high resolution (2880x1620...
Fixed in https://github.com/qgis/QGIS/pull/2014 Alessandro Pasotti
01:43 AM Bug report #11337: Attribute Table does not show correctly on high resolution (2880x1620) monitors
This is an attempt to fix this issue:
https://github.com/qgis/QGIS/pull/2014
Alessandro Pasotti
12:39 AM Bug report #12542 (Feedback): Processing: better naming structure for output
Yes, definitely the labels can be changed, and that won't break anything in the execution of algorithms.
As you say,...
Victor Olaya
12:30 AM Bug report #12583 (Closed): Don't work Edit Rendering styles for outputs for some providers
Fixed in changeset commit:"9f2c544bffdb3484a86199908301c8a023175767". Victor Olaya
12:20 AM Bug report #12586 (Closed): Processing field calculator allows no_value for column name
Fixed in changeset commit:"55108ae70908212b794c99cae0fc9f617ff51a12". Victor Olaya
12:02 AM Bug report #12643 (Feedback): Processing convex hull does not work
cannot reprocude it in here, but it looks like it's a problem with your layer. Can you share it? Victor Olaya
11:59 PM Bug report #12646 (Feedback): Split RGB bands stopped to work in latest Processing releases
i should be fine now. seems that 2.1.4 changed (again) the naming of output files for that algorithm.
However, i see...
Victor Olaya
11:31 PM Feature request #7541 (Closed): attribute table : add a "show selected features if there is a sel...
Fixed in changeset commit:"288b242aa943bce816a91aaa3d96658efadbf9e0". Matthias Kuhn
11:02 PM Feature request #12607: Improved handling of calculated values
Yes, that's certainly the most robust solution I see, a simple automated way of keeping calculated Shapefile fields u... Dan Isaacs
03:56 PM Feature request #12607: Improved handling of calculated values
Ok so the main issue is you need to have those fields in the database, say @[email protected], because you need to use the fields... Nathan Woodrow
12:12 PM Feature request #12607 (Open): Improved handling of calculated values
Giovanni Manghi
04:13 AM Feature request #12607: Improved handling of calculated values
To use the example I gave in the original post, you have a simple set of polygons, each has an area value, a populati... Dan Isaacs
03:03 AM Feature request #12607: Improved handling of calculated values
Maybe I'm missing something but the virtual fields already does all this by updating itself when something changes. ... Nathan Woodrow
02:41 AM Feature request #12607: Improved handling of calculated values
My apologies if I have misinterpreted the purpose of this section, but I've not submitted a bug report, I've submitte... Dan Isaacs
07:16 PM Bug report #12660 (Closed): Feature count on SHP file layer does not update after deleting record...
Feature count on SHP file layer does not update after deleting records during edit mode and saving the changes.
Turni...
James Harvey
02:37 PM Bug report #12659 (Closed): Certain fonts don't work in Print Composer
My team uses Clan Pro for our qgis work. We have about 10 different weights and styles of clan pro that we use.
It ap...
Sarah van Vliet
12:00 PM Bug report #6254 (Closed): Distance Matrix doesn't work with postgis vector
Giovanni Manghi
11:35 AM Bug report #12657 (Closed): Processing/GRASS don't work under Windows if username or input/output...
Already discussed with Victor and Alexander. The issue has no easy solution apparently.
If the username has non as...
Giovanni Manghi
09:54 AM Bug report #12637: Primary key set to null when using Identify on layer or editing a child table.
cgsbob - wrote:
> Matthias Kuhn wrote:
> > * Which kind of feature form are you using (autogenerated, drag and drop o...
cgsbob -
09:52 AM Bug report #12637: Primary key set to null when using Identify on layer or editing a child table.
Matthias Kuhn wrote:
> * Which kind of feature form are you using (autogenerated, drag and drop or ui file)?
> * Do ...
cgsbob -
09:50 AM Bug report #12656 (Closed): Style Manager filter ignores currently selected group
I have created a new group in Style Manager and populated it with some styles. When I filter the symbols in my group ... Spencer Gardner
05:37 AM Bug report #12655 (Closed): Copy / paste style on different geometry layers
Currently we can paste a style to all kinds layer whatever source geometry is and it makes some strange behaviour on ... Rémi Bovard
05:21 AM Bug report #12654 (Closed): Remove geographical operations on table layers
It's nonsense to have geographical operations (from right click or Layer menu) on table layers like:
* Set layer scal...
Rémi Bovard
04:07 AM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I confirmed on 2.6.1 on a large table (2.8M records): there is considerably faster and int columns values are ordered... Giovanni Manghi
04:07 AM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I confirmed on 2.6.1 on a large table (2.8M records): there is considerably faster and int columns values are ordered... Giovanni Manghi
04:07 AM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I confirmed on 2.6.1 on a large table (2.8M records): there is considerably faster and int columns values are ordered... Giovanni Manghi
03:48 AM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
GDAL is working (sort of). The output is displaced from the data as per 'Displace.tiff'. The associated log is 'displ... Bruce Atkinson
03:48 AM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
GDAL is working (sort of). The output is displaced from the data as per 'Displace.tiff'. The associated log is 'displ... Bruce Atkinson
03:43 AM Bug report #12653: Embed layers window causes QGIS crash when no project is selected
confirmed here on master, message is just "seg fault". Giovanni Manghi
03:43 AM Bug report #12653: Embed layers window causes QGIS crash when no project is selected
confirmed here on master, message is just "seg fault". Giovanni Manghi
03:43 AM Bug report #12653: Embed layers window causes QGIS crash when no project is selected
confirmed here on master, message is just "seg fault". Giovanni Manghi
03:43 AM Bug report #12653: Embed layers window causes QGIS crash when no project is selected
confirmed here on master, message is just "seg fault". Giovanni Manghi
03:37 AM Bug report #12653 (Closed): Embed layers window causes QGIS crash when no project is selected
Steps to reproduce:
* Layer > Embed layers and groups
* OK
Result: Crash with minidump
Rémi Bovard
03:40 AM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP

> The attached shapefile contained in "wup12782groves-a.zip" was exported from QGIS Version 2.8.1 (on a Windows 7 sy...
Giovanni Manghi

2015-04-26

12:55 AM Bug report #12652 (Closed): marker rotation and polygon containing rings
I want to style a polygon so that black triangles face inside the polygon. That works ok but as soon as the polygon c... Bernhard Ströbl
12:31 AM Feature request #12607: Improved handling of calculated values
Dan Cuillin wrote:
> 1) The 'update' button I'm referring to is actually the 'update all' button on the attribute tab...
Giovanni Manghi
12:10 AM Feature request #12607: Improved handling of calculated values
1) The 'update' button I'm referring to is actually the 'update all' button on the attribute table. If I have a colum... Dan Isaacs
03:08 PM Feature request #12607 (Feedback): Improved handling of calculated values
what "update" button do you refer to?
Generally speaking: I do not agree that this is a "major flow" in QGIS (or any...
Giovanni Manghi
03:08 PM Feature request #12607 (Feedback): Improved handling of calculated values
what "update" button do you refer to?
Generally speaking: I do not agree that this is a "major flow" in QGIS (or any...
Giovanni Manghi
12:11 AM Bug report #12625 (Closed): Difficult to set value in drop down list in table column
Patrick Dunford wrote:
> I'm currently using 2.5
Use a more recent version. In 2.8.1 this is fixed. Please reopen if...
Giovanni Manghi
12:11 AM Bug report #12625 (Closed): Difficult to set value in drop down list in table column
Patrick Dunford wrote:
> I'm currently using 2.5
Use a more recent version. In 2.8.1 this is fixed. Please reopen if...
Giovanni Manghi
07:41 PM Bug report #12625: Difficult to set value in drop down list in table column
I'm currently using 2.5 Patrick Dunford
11:58 PM Feature request #12650 (Open): atlas - export only certain pages

> That's what I'm looking for. I can enter page numbers to export and only export those pages in the "page range" fi...
Giovanni Manghi
11:58 PM Feature request #12650 (Open): atlas - export only certain pages

> That's what I'm looking for. I can enter page numbers to export and only export those pages in the "page range" fi...
Giovanni Manghi
08:18 PM Feature request #12650: atlas - export only certain pages
not exactly. I mean you could use it for that but it's relatively labor-intensive for such a simple task.
I've been u...
Jesse McMillan
08:18 PM Feature request #12650: atlas - export only certain pages
not exactly. I mean you could use it for that but it's relatively labor-intensive for such a simple task.
I've been u...
Jesse McMillan
08:18 PM Feature request #12650: atlas - export only certain pages
not exactly. I mean you could use it for that but it's relatively labor-intensive for such a simple task.
I've been u...
Jesse McMillan
03:11 PM Feature request #12650 (Feedback): atlas - export only certain pages
In the atlas option there is the one that allows you to filter (by expression) what you want to print. Isn't this wha... Giovanni Manghi
03:11 PM Feature request #12650 (Feedback): atlas - export only certain pages
In the atlas option there is the one that allows you to filter (by expression) what you want to print. Isn't this wha... Giovanni Manghi
02:58 PM Feature request #12650 (Open): atlas - export only certain pages
I would like the ability to export only certain pages from an atlas.
For instance:I have an atlas with 149 pages, and...
Jesse McMillan
09:29 PM Bug report #12651 (Closed): Parameters not Displaying in Browser
In the Standalone Browser, when selecting a folder, nothing appears in the Param tab. When I asked a more experienced... Zach Axelrod
08:09 PM Bug report #12618: 2.8.1 circles which don't seem to be on any layer
> Hi Nyall,
> the way this circles showed seems to make sense to be something related to diagrams, I have anyway chec...
cgsbob -
03:13 PM Bug report #12618: 2.8.1 circles which don't seem to be on any layer
Nyall Dawson wrote:
> I'm 99% confident it's caused by empty diagrams - can you double check to help me confirm?
Hi ...
Giovanni Manghi
02:50 PM Bug report #12618: 2.8.1 circles which don't seem to be on any layer
I'm 99% confident it's caused by empty diagrams - can you double check to help me confirm? Nyall Dawson
03:15 PM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I don't have such big dataset to test with right now, anyway until then I'll tag this a regression as it seems to be. Giovanni Manghi
03:15 PM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I don't have such big dataset to test with right now, anyway until then I'll tag this a regression as it seems to be. Giovanni Manghi
03:15 PM Bug report #12630: Get sample query expression non-responsive for large PostGIS datasets
I don't have such big dataset to test with right now, anyway until then I'll tag this a regression as it seems to be. Giovanni Manghi
02:43 PM Bug report #12649 (Closed): inconsistencies in editing tools when working on a postgis layer with...
Not sure if this is a regression.
Add a postgis layer without primary.
Toggling editing is possible but:
* only th...
Giovanni Manghi
02:32 PM Bug report #12648 (Closed): When editing a CSV (added as geometryless table) newly added records ...
To see the added record is necessary to close and reopen the table of attributes.
This was not the case in past qgis...
Giovanni Manghi
02:20 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
Thanks for testing!!
Perhaps it's a Mac thing. I'm not the only one with a problem, at least for GDAL; see http://w...
Bruce Atkinson
01:54 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
I cannot test on OsX as I don't have such platform (or know anyone that could allow me to try), but on Linux and Wind... Giovanni Manghi
01:23 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
The models are shown in the log files, specifically for GDAL Algorithm Grid (Inverse distance to a power) and for GRA... Bruce Atkinson
01:23 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
The models are shown in the log files, specifically for GDAL Algorithm Grid (Inverse distance to a power) and for GRA... Bruce Atkinson
01:23 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
The models are shown in the log files, specifically for GDAL Algorithm Grid (Inverse distance to a power) and for GRA... Bruce Atkinson
01:23 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
The models are shown in the log files, specifically for GDAL Algorithm Grid (Inverse distance to a power) and for GRA... Bruce Atkinson
01:23 PM Bug report #12647: qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac, 10.10.3)
The models are shown in the log files, specifically for GDAL Algorithm Grid (Inverse distance to a power) and for GRA... Bruce Atkinson
01:06 PM Bug report #12647 (Feedback): qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (m...
Please detail the modules you are trying to run and if possible attach sample of your inputs. Giovanni Manghi
01:06 PM Bug report #12647 (Feedback): qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (m...
Please detail the modules you are trying to run and if possible attach sample of your inputs. Giovanni Manghi
12:18 PM Bug report #12647 (Closed): qgis 2.8.1 – processing gdal 1.11.2 error/processing GRASS error (mac...
I'm getting an error when using either GDAL or GRASS in the ToolBox (see GDAL.tiff, GREASS.tiff). The complete logs a... Bruce Atkinson
01:39 PM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP

> The attached shapefile contained in "wup12782groves-a.zip" was exported from QGIS Version 2.8.1 (on a Windows 7 sy...
Giovanni Manghi
12:35 PM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP
Please excuse me for taking so long to reply; I've been out of town.
Exporting shapefiles from QGIS to send to my as...
Marc Hurst
12:35 PM Bug report #12627: Shapefile exported from Version 2.8.1 is Unreadable to ARCMAP
Please excuse me for taking so long to reply; I've been out of town.
Exporting shapefiles from QGIS to send to my as...
Marc Hurst
11:17 AM Feature request #6894: GRASS r.mapcalc cumbersome to use, issues on Windows
Adding r.mapcalc becomes now paramount because in GRASS 7 there is no more r.mapcalculator Giovanni Manghi
04:37 AM Bug report #12645 (Closed): DB Manager: python error when clicking on missing/broken Spatialite c...
Fixed in changeset commit:"102f6d31002917e72441fad013d0165c4da3132d". Jürgen Fischer
03:54 AM Bug report #12646 (Closed): Split RGB bands stopped to work in latest Processing releases
it worked fine until Processing shipped with qgis 2.6.1, since then the module does not work anymore. Giovanni Manghi
03:51 AM Bug report #12637 (Feedback): Primary key set to null when using Identify on layer or editing a c...
Giovanni Manghi
02:13 AM Bug report #12637: Primary key set to null when using Identify on layer or editing a child table.
* Which kind of feature form are you using (autogenerated, drag and drop or ui file)?
* Do you have the custom widg...
Matthias Kuhn

2015-04-25

01:59 AM Bug report #12645 (Closed): DB Manager: python error when clicking on missing/broken Spatialite c...
... Giovanni Manghi
01:57 AM Bug report #12617: Join without caching do not work with Spatialite tables
Confirmed on master too. Seems like it never worked as expected (tested down to 2.0.1). Giovanni Manghi
01:57 AM Bug report #12617: Join without caching do not work with Spatialite tables
Confirmed on master too. Seems like it never worked as expected (tested down to 2.0.1). Giovanni Manghi
01:57 AM Bug report #12617: Join without caching do not work with Spatialite tables
Confirmed on master too. Seems like it never worked as expected (tested down to 2.0.1). Giovanni Manghi
01:57 AM Bug report #12617: Join without caching do not work with Spatialite tables
Confirmed on master too. Seems like it never worked as expected (tested down to 2.0.1). Giovanni Manghi
01:57 AM Bug report #12617: Join without caching do not work with Spatialite tables
Confirmed on master too. Seems like it never worked as expected (tested down to 2.0.1). Giovanni Manghi
01:54 AM Bug report #12606 (Feedback): URL format in request DescribeFeature, && in URL request.
seems fine here on QGIS master, example:
?service=WFS&amp;version=1.0.0&amp;request=DescribeFeatureType&amp;typeName...
Giovanni Manghi
 

Also available in: Atom