QGIS » QGIS Application

2014-02-06

11:53 PM Bug report #9501: QGIS crash on specifying filter for WFS layer.

I confirm QGis crash with both queries. This ticket should have *"Causes crash or corruption"* set to "Yes", shouldn'... Nacho Varela

05:17 AM Bug report #9501: QGIS crash on specifying filter for WFS layer.

@intersects( $geometry, geomFromWKT( 'LINESTRING(709841 6187968,727061 6198617)')) causes a crash aswell@ Thomas Sogaard-Pedersen

03:29 AM Bug report #9501 (Closed): QGIS crash on specifying filter for WFS layer.

Running QGIS 2.0.1-Dufour desktop on windows XP 32bit
I'm connected to a WFS server (some topographical data in GML 2... Thomas Sogaard-Pedersen

11:52 PM Bug report #9506 (Closed): preview atlas hides the coverage in the main canvas

In an atlas composer:
1. Check "Hidden coverage layer"
2. Enable atlas preview
=> the layer is hidden on the main c... Denis Rouzaud

11:13 PM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...

Martin Dobias wrote:
> This should have nothing to do with geometry simplification. This is mainly about having those... Alvaro Huarte

08:53 PM Bug report #9447 (Open): Toggling layer visibility sometimes has no effect when using geometry si...

This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()... Martin Dobias

08:53 PM Bug report #9447 (Open): Toggling layer visibility sometimes has no effect when using geometry si...

This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()... Martin Dobias

08:53 PM Bug report #9447 (Open): Toggling layer visibility sometimes has no effect when using geometry si...

This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()... Martin Dobias

10:40 PM Revision e3aef431 (qgis): [TRANSUP] nl by Richard

Signed-off-by: Werner Macho <[email protected]> Werner Macho

09:03 PM Bug report #8174 (Closed): Polygons digitized in Postgis layer with "Avoid Intersections" turned ...

Fixed in changeset commit:"caf33b657f6c845779797c86e82fb5d71a28b6ee". Martin Dobias

08:48 PM Bug report #9032 (Feedback): LINESTRINGM not displayed

Martin Dobias

08:45 PM Bug report #9032: LINESTRINGM not displayed

I still cannot confirm. Used this testing table and the line shows up in canvas:... Martin Dobias

04:00 PM Revision d26831b3 (qgis): [TRANSUP] fix typos

Signed-off-by: Werner Macho <[email protected]> Werner Macho

03:08 PM Bug report #9505 (Closed): qgis crash on TIN interpolation of curve line

hi if i create a tin on shape of curve line with 3d elevation it crash if i try with TIN interpolation SC SC

02:22 PM Revision 1401f483 (qgis): Merge pull request #1144 from Jean-Roc/traduction_ui

update french translation Werner Macho

12:55 PM Bug report #9504: iface.addToolBar but no iface.removeToolBar

You can delete the toolbar. Jürgen Fischer

12:50 PM Bug report #9504 (Closed): iface.addToolBar but no iface.removeToolBar

python iface has a method addToolBar, to add a toolbar with buttons.
But there is no way to remove the toolbar.
I've... Richard Duivenvoorde

12:46 PM Revision ffcbdabe (qgis): [composer] Refresh control images following frame join stle change

Nyall Dawson

12:46 PM Revision d22f7e8b (qgis): [composer] Fix stacking of items breaks after pasting items. Make sure ...

Nyall Dawson

12:05 PM Bug report #9500: Wrong list of "result entities ID" after a spatial query

works fine for me either 2.0.1 or master version.
Please can you provide more info about the problem ?
maybe adding ... Salvatore Larosa

09:09 AM Bug report #9500: Wrong list of "result entities ID" after a spatial query

Paolo Cavallini wrote:
> Please add a more descriptive title
i want to update the title with something like "wrong l... Jean-Michel Follin

08:46 AM Bug report #9500 (Feedback): Wrong list of "result entities ID" after a spatial query

Please add a more descriptive title Paolo Cavallini

02:13 AM Bug report #9500 (Closed): Wrong list of "result entities ID" after a spatial query

When i make a query with the spatial query plugin (intersection between 2 layers), the selected features correspond t... Jean-Michel Follin

11:50 AM Revision 4bff0ede (qgis): Merge pull request #11 from olivierdalang/od_french

Corrections de français Jean-Roc Morreale

11:44 AM Bug report #9503 (Closed): Fill patterns are clipped when exporting rotated composer to PDF

In my composer I have a map with only a polygon shapefile layer. The map is rotated to 290 degrees. The polygon lay... Ed B

09:03 AM Bug report #9502: Reshape Tool quits working

Also in QGIS version 2.1.0.... Samuel Grant

06:50 AM Bug report #9502 (Closed): Reshape Tool quits working

When editing a polygon, the Reshape tool works for a while, about 20 edits, the stops working on that shape. It will ... Samuel Grant

08:16 AM Revision 167d9b8a (qgis): Merge pull request #1143 from Cracert/i18n

[TRANSUP] pl: WMS Werner Macho

06:22 AM Revision 84975bf0 (qgis): [TRANSUP] pl: WMS

Robert Szczepanek

05:58 AM Bug report #9485: Line Offset in symbology generates artifacts

Hi,
I took note that a similar issue had already been opened.
Here is a snapshot with and without simplification an... mathieu rajerison

05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers

I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... Bernhard Ströbl

05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers

I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... Bernhard Ströbl

05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers

I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... Bernhard Ströbl

04:06 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

ramon . wrote:
> Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at... Alvaro Huarte

02:54 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at home:
ERROR 1: ... ramon .

02:13 AM Bug report #9499 (Closed): path to external-svg-folder or storage of svg

I tried to assign QGIS the path to my svg (in german: Layereigenschaften - Stil - Symbollayertyp is set to SVG-Markie... Marianne Wargenau

01:30 AM Bug report #6085: Composer does not maintain state of render preview and page zoom

Upstream bug report: https://bugreports.qt-project.org/browse/QTBUG-36675 Nyall Dawson

2014-02-05

12:52 AM Revision 267b9606 (qgis): fix doxygen warning

Jürgen Fischer

12:49 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro - you might have run into the issue I describe here : http://nyalldawson.net/2013/04/building-qgis-on-ubuntu-1... Nyall Dawson

11:52 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > I am going to request help to qgis dev mailing list.
>
> Try to bui... Alvaro Huarte

11:48 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

ramon . wrote:
> A couple of extra bits:
> 1. Alvaro, if you have a 64-bit install the python library is somewhere od... Alvaro Huarte

11:43 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro Huarte wrote:
> I am going to request help to qgis dev mailing list.
Try to build "packages":http://htmlprevi... Jürgen Fischer

11:38 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

A couple of extra bits:
1. Alvaro, if you have a 64-bit install the python library is somewhere odd. Something /usr/l... ramon .

11:23 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> Alvaro, the log window doesn't throw any error message.
>
> Yes, please, try on lin... Alvaro Huarte

12:47 AM Revision 22346cd3 (qgis): memory provider: add more native types (fixes #9371)

Jürgen Fischer

12:22 AM Bug report #9462 (Closed): layer.getFeatures on return the first feature

in version 2.0.1 vector providers do not allow multiples iterators
[[https://issues.qgis.org/projects/quantum-gis/re... Arnaud Morvan

12:09 AM Revision fe05619b (qgis): postgres provider: fix saving of multigeometries to tables without geom...

Jürgen Fischer

12:09 AM Revision 9295e6e9 (qgis): debian packaging update

Jürgen Fischer

11:54 PM Revision 58faa5b4 (qgis): Merge pull request #1129 from etiennesky/gdaltools_fixes2

gdaltools: use GDAL python bindings to get raster SRS and extent (fix #9460) Giuseppe Sucameli

11:09 PM Bug report #9350: reprojected postgresql layers are plotted with offset and very slow

I also have a problem with the on-the-fly reprojection, using QGIS 2.0.1 on a Kubuntu 12.04 system. Find attached a s... Kay F. Jahnke

10:54 PM Revision 6178860d (qgis): [TRANSUP] small fix in german translation

Signed-off-by: Werner Macho <[email protected]> Werner Macho

10:30 PM Revision acf2c3f7 (qgis): faute de majuscule

Olivier Dalang

10:30 PM Revision fd3e3033 (qgis): faute de grammaire

Olivier Dalang

10:30 PM Revision 0f524d10 (qgis): translation update

Olivier Dalang

09:20 PM Bug report #9482: Composer exporting to eps add its own extension .EPS

I have. File->Export as image-> and select EPS Bogdan Hlevca

08:14 PM Bug report #9482 (Feedback): Composer exporting to eps add its own extension .EPS

How are you exporting to EPS? I don't have any choice of EPS export from composer... Nyall Dawson

09:03 PM Revision 467e8f15 (qgis): Update srs.db

Marco Hugentobler

08:02 PM Bug report #9498: legend item vertical spacing (once again) broken for layers set to hidden

Marking as blocker since it's a regression.
In 2.0, the user could do this:
- Empty layer title string, which would ... Mathieu Pellerin - nIRV

07:25 PM Bug report #9498: legend item vertical spacing (once again) broken for layers set to hidden

The fix here appears to be simple: when a layer title type is set to hidden, the vertical spacing value above the (fi... Mathieu Pellerin - nIRV

07:22 PM Bug report #9498 (Closed): legend item vertical spacing (once again) broken for layers set to hidden

A regression slipped into QGIS master with regards to composer legend item's vertical spacing of layers set to hidden... Mathieu Pellerin - nIRV

05:10 PM Revision b49a9172 (qgis): [TRANSUP] added telugu language on request

Signed-off-by: Werner Macho <[email protected]> Werner Macho

04:43 PM Bug report #9497 (Closed): Hide the UUID from the composer items

Hi !
Some time ago, we introduced UUID for composer items.
Those are useful for plugin since they allow to identify ... Olivier Dalang

03:48 PM Bug report #9371 (Closed): Paste Features as New Vector Layer/New Memory Vector layer fails with ...

Fixed in changeset commit:"22346cd3c7c4c670a26ae1e606f8b0a6d9a0a0a4". Jürgen Fischer

02:57 PM Bug report #9460: gdaltools relies on gdalinfo for raster SRS and extent, should use python API

Merged, thanks Etienne. Giuseppe Sucameli

02:54 PM Bug report #9460 (Closed): gdaltools relies on gdalinfo for raster SRS and extent, should use pyt...

Fixed in changeset commit:"58faa5b4ad113860e798f2b5fdeb0741bb864e09". Giuseppe Sucameli

01:25 PM Revision b25dff85 (qgis): [composer] Standardise capitalization on all controls

Nyall Dawson

01:14 PM Revision 7d4776a4 (qgis): [composer] Fix graphical corruption with map grid frames

Nyall Dawson

01:00 PM Revision d8c95926 (qgis): [composer] Fix qt disconnect warnings

Nyall Dawson

12:59 PM Revision 5adbaf7d (qgis): [composer] Use miter joins for item frames (partial fix for #9479)

Nyall Dawson

12:48 PM Bug report #9213: 'bad_alloc' error at QGIS start

Memory usage doesn't really 'grow' to ~880 MiB; QGIS is simply unable to allocate if it doesn't have that much virt... Ferdinand Majerech

12:41 PM Revision b85faf14 (qgis): [composer] Follow up 78ecef6, fix setting line width in scalebars

Nyall Dawson

10:29 AM Revision 17546e77 (qgis): Merge pull request #1142 from Cracert/i18n

[TRANSUP] pl: QgsOracle cont. Werner Macho

09:05 AM Revision 03f2ec93 (qgis): new icon for Fill Ring tool. Thanks, Robert!

Alexander Bruy

08:15 AM Bug report #9480: Labels for polygon centroids should always originate inside a polygon

Yeah, PointOnSurface could be an alternative to centroid - it would be good to try it out and have a comparison! Martin Dobias

07:17 AM Bug report #9356 (Closed): Atlas print does nto respect composition page size, orientation

I was doing a print on an A1 layout for Jakarta using Atlas export as pdf option. I am pleased to say I just tested a... Tim Sutton

06:20 AM Bug report #9032: LINESTRINGM not displayed

Yes Martin, I used postgis LINESTRINGM data. In current Master, they are displayed correctly.
However, I had also MU... Regis Haubourg

05:30 AM Bug report #9032: LINESTRINGM not displayed

I cannot replicate with a LINESTRINGM shapefile. Did you use a shapefile or PostGIS or something else? Please attach ... Martin Dobias

06:17 AM Revision 48c91a45 (qgis): [TRANSUP] pl: QgsOracle cont.

Robert Szczepanek

04:19 AM Bug report #9496 (Closed): Warning: QPen::setDashPattern: Pattern not of even length

In QGIS Master I open a QGIS 2.0 project and most of the layers do not draw. They render perfectly in QGIS 2.0 but no... Gavin Fleming

03:39 AM Bug report #8400 (Closed): crash opening layer properties of a freshly inserted wms layer

Seems to be fixed now. (using 5192e8d)
I'll re-open if it happens again. Jonathan Moules

03:23 AM Bug report #8857: sip: Unable to find file "QtCore/QtCoremod.sip"

just as a note: on ubuntu you have to install python-qt4-dev package to solve this problem Werner Macho

02:13 AM Feature request #9493: Filter improvements

Hi Etienne,
Don't get me wrong, the current implementation is good for power users, but most users aren't that techni... Jonathan Moules

01:45 AM Feature request #9451: Create a unified "Add Data" dialog

Etienne Tourigny wrote:
> You should link here the new issues you created (as "Related issues")
They didn't seem per... Jonathan Moules

01:18 AM Feature request #7058: Snapping priority - Prioritise vertices over lines

This method would be really useful for many plugins. luca76 -

2014-02-04

11:31 PM Feature request #9495 (Rejected): Add new symbol sets

Paolo Cavallini

11:20 PM Feature request #9495: Add new symbol sets

Probably duplicates #7981 Alexander Bruy

10:46 PM Feature request #9495 (Rejected): Add new symbol sets

This is better done with a download (upload) web application,similar to the plugin one.
Some interesting set:
* http... Paolo Cavallini

11:31 PM Feature request #7981: Add SVG symbol sets

Taking from duplicate:
This is better done with a download (upload) web application,similar to the plugin one.
Some ... Paolo Cavallini

11:20 PM Feature request #7981: Add SVG symbol sets

See also #9495 Alexander Bruy

10:59 PM Feature request #9006 (Resolved): Invert color ramp on vector layers

AFAIK this has been implemented. Please reopen if necessary Paolo Cavallini

10:59 PM Feature request #9006 (Resolved): Invert color ramp on vector layers

AFAIK this has been implemented. Please reopen if necessary Paolo Cavallini

04:43 PM Revision b2dc019e (qgis): [TRANSUP] es by Carlos

Signed-off-by: Werner Macho <macho@mint> Werner Macho

03:54 PM Bug report #9213: 'bad_alloc' error at QGIS start

Tests with latest master has shown that QGIS will throw bad_alloc error when there is less than 880 MiB of virtual me... Ivan Mincik

02:24 PM Bug report #9485: Line Offset in symbology generates artifacts

mathieu rajerison wrote:
> I am under QGIS Dufour and I can not see none of these options.
>
> In layer properties, ... Alvaro Huarte

11:33 AM Bug report #9485: Line Offset in symbology generates artifacts

This relates to #9456 Nyall Dawson

07:08 AM Bug report #9485: Line Offset in symbology generates artifacts

I am under QGIS Dufour and I can not see none of these options.
In layer properties, does rendering refer to "Style"... mathieu rajerison

04:51 AM Bug report #9485: Line Offset in symbology generates artifacts

This may be due because "simplification" of geometries is enabled.
You can disable it -> Layer properties -> Renderi... Alvaro Huarte

01:13 AM Bug report #9485 (Closed): Line Offset in symbology generates artifacts

Line offset in symbology is useful when you have a network with several lines superimposing with others.
But it gene... mathieu rajerison

11:33 AM Feature request #9493: Filter improvements

see my implementation here with commit "browser dock: add normal syntax (with wildcards at begin and end) and case in... Etienne Tourigny

10:49 AM Feature request #9493: Filter improvements

Hi,
when I implemented the filter functionality I did things as simple as possible, using QT's QRegexp [1] class wit... Etienne Tourigny

09:25 AM Feature request #9493 (Closed): Filter improvements

There are a number of simple improvements that I believe can be made to the Browser filter function to make it more u... Jonathan Moules

10:50 AM Feature request #9451: Create a unified "Add Data" dialog

You should link here the new issues you created (as "Related issues") Etienne Tourigny

09:13 AM Feature request #9451: Create a unified "Add Data" dialog

To be entirely honest I wasn't really even aware that the Browser had this functionality. Looking at it now it's quit... Jonathan Moules

10:47 AM Bug report #9481: Polygon labels cannot be centred over their polygons

+1 for making _Offset from Centroid_ the default. That just makes sense for polygons, -possible even for points-. Thi... Larry Shaffer

07:40 AM Bug report #9481: Polygon labels cannot be centred over their polygons

I also find the wording confusing, I would expect "around centroid" place it right on the centroid, which "offset fro... Etienne Tourigny

05:00 AM Bug report #9481 (Closed): Polygon labels cannot be centred over their polygons

@martin Ah yes that gives me better output thanks! Tim Sutton

09:33 AM Bug report #8870: "Metadata" for WMS/WFS/etc? layer issues

> More obviously a bug - the only part of the WMS layer Metadata screen that's populated is the "properties". This co... Jonathan Moules

09:32 AM Feature request #8868: Don't show provider specific layer data source string

Note - also seems like it should be removed from the "Browser" layer-properties too. Jonathan Moules

08:04 AM Feature request #8868: Don't show provider specific layer data source string

Removing is seems like an idea, at least as long as it doesn't mean anything to the user.
Adding a layer-source that ... Jonathan Moules

09:30 AM Bug report #9494 (Closed): Browser - Edit - doesn't work for OWS services

I have a number of OGC services set up and accessible via the Browser.
If I right-click on the name of a service for... Jonathan Moules

09:29 AM Revision a4c2148a (qgis): Merge pull request #1125 from ahuarte47/Issue_9454

Fix bug #9454: MapNodeTool unnecessarily refresh the map Denis Rouzaud

09:15 AM Feature request #9492 (Closed): Browser doesn't list layers - WMTS

1) Add this WMTS service:
http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?service=WMTS
2) Connect using the usua... Jonathan Moules

09:01 AM Revision 10947f79 (qgis): [composer] Increase number of decimal places for grid intervals and off...

Nyall Dawson

09:01 AM Revision 78ecef6f (qgis): [composer] Draw mouse handles and item bounds outside of item's frames,...

Nyall Dawson

08:12 AM Revision 0fc0ffbb (qgis): Merge pull request #1141 from Cracert/i18n

[TRANSUP] pl: QgsOracle Werner Macho

07:24 AM Revision f7116f68 (qgis): [TRANSUP] pl: QgsOracle

Robert Szczepanek

07:12 AM Feature request #9488: Rounded frames in the composer

okay Mathieu.
I had checked before posting but searched for "rounded" but not "round" word. So I hadn't seen the prev... mathieu rajerison

05:48 AM Feature request #9488: Rounded frames in the composer

Hi Mathieu, this is Mathieu :)
See a recent issue I filed on this: #9479
Maybe this could be closed as duplicate of... Mathieu Pellerin - nIRV

01:29 AM Feature request #9488 (Closed): Rounded frames in the composer

If you want some rounded frames in the composer, you have to import an SVG or an image of it.
It would be nice to ap... mathieu rajerison

05:46 AM Feature request #9479: change composer item frame join style to miter join

Just a small update on the above. I think there's both an issue and a feature request at play here :)
The issue: the... Mathieu Pellerin - nIRV

05:33 AM Feature request #9491 (Feedback): Set "Offset from centroid" as standard for polygon label placement

See #9481 for details. Paolo Cavallini

05:19 AM Bug report #9490 (Closed): Line labels sometimes placed on an endpoint rather than in the middle

Hi !
I frequently encounter the following bug : depending on other layer's visibility, some labels (of polyline laye... Olivier Dalang

04:38 AM Bug report #9489 (Closed): Copy/Paste issue with explicit primary keys

Copy/paste from a shapefile to a Postgis table with explicit primary keys is no longer possible with QGis 2.0
(Explic... Fabrice Fabrice

01:26 AM Feature request #9487 (Closed): Dropping the shadows of some objects

The 2.2 announces gradient fills for objects.
The drop shadows can be applied to labels.
They can be useful to enha... mathieu rajerison

01:22 AM Feature request #9486 (Closed): Editing Layer Labels in Composer Legends by Double-Clicking

In the composer, the edit button is close to the delete button so that it can lead to delete a layer label instead of... mathieu rajerison

2014-02-03

12:36 AM Bug report #9454 (Closed): MapNodeTool unnecessarily refresh the map

Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 Alvaro Huarte

12:36 AM Bug report #9454 (Closed): MapNodeTool unnecessarily refresh the map

Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 Alvaro Huarte

12:21 AM Bug report #9481: Polygon labels cannot be centred over their polygons

There is also "offset from centroid" option which does what you would expect - the labels are then positioned so that... Martin Dobias

11:59 AM Bug report #9481 (Closed): Polygon labels cannot be centred over their polygons

When labelling polygons, using 'around centroid' the label placement uses the bottom left of the label instead of the... Tim Sutton

12:17 AM Bug report #9480: Labels for polygon centroids should always originate inside a polygon

Doesn't QGIS come with GEOS? It could be worth having a try if label placement would look better by using GEOS PointO... Jukka Rahkonen

12:16 AM Bug report #9480: Labels for polygon centroids should always originate inside a polygon

There is something called Distance Transform that computes distance from each point to the border. We could probably ... Martin Dobias

11:37 AM Bug report #9480 (Closed): Labels for polygon centroids should always originate inside a polygon

When labelling polygons the label placement is often suboptimal. I am attaching a contrived example which illustrates... Tim Sutton

12:03 AM Bug report #9443 (Closed): Snapping to guides not working in windows

Fixed in 78ecef6f2a476043516eede1d3a8504481fc1e22 Nyall Dawson

12:02 AM Bug report #8943 (Closed): Problems with "Snap to alignments" in Map Composer

Fixed in changeset commit:"78ecef6f2a476043516eede1d3a8504481fc1e22". Nyall Dawson

12:02 AM Bug report #8828 (Closed): Composer Grid Intervals

Fixed in changeset commit:"10947f796c24f3c63c10b714d39dd876a5cce8c9". Nyall Dawson

11:09 PM Feature request #9483 (Feedback): Replace help with pages from the manual

Translating help files in GUI is always the most painful part, and I am convinced it
is not the most useful one, as ... Paolo Cavallini

10:16 PM Bug report #9430: Disable "Paste Features as New Layer" if empty clipboard

with this patch, QGIS will try to see if there are geometric features in the clipboard every time it changes.
So as s... Denis Rouzaud

08:27 AM Bug report #9430: Disable "Paste Features as New Layer" if empty clipboard

Denis Rouzaud wrote:
> This will output GEOS every time there is a new copy which is not made of WKT strings.
This i... Radim Blazek

06:08 PM Bug report #9482 (Closed): Composer exporting to eps add its own extension .EPS

Exporting an image from map composer add its own extension .EPS to the file name. This behaviour is not present for o... Bogdan Hlevca

04:01 PM Revision 9ddfdd8f (qgis): Merge branch 'master' of github.com:qgis/QGIS

Paolo Cavallini

04:00 PM Revision 97cd1206 (qgis): Updated IT translation

Paolo Cavallini

03:28 PM Revision f8028087 (qgis): Fix query to detect postgis topology availability.

Closes #9453 Sandro Santilli

03:25 PM Revision da4c4292 (qgis): Fix query to detect postgis topology availability.

Closes #9453 Sandro Santilli

10:37 AM Revision 673406d2 (qgis): postgres provider: don't look for topology layers without topology supp...

Jürgen Fischer

09:30 AM Revision f45e1123 (qgis): Fix for dxf label export

Marco Hugentobler

09:25 AM Revision f18a090f (qgis): Merge pull request #1139 from Cracert/i18n

[TRANSUP] pl: DlgAutofill Werner Macho

09:01 AM Bug report #9462: layer.getFeatures on return the first feature

In iterator loop, I call layer.dataProvider().changeAttributeValues({ feature.id() : attrs })
when I comment this lin... Arnaud Morvan

07:50 AM Bug report #9462: layer.getFeatures on return the first feature

I got an error : Error while updating internal statistics Arnaud Morvan

07:50 AM Revision f9861f84 (qgis): revert 7a9e682 and 983b1c9

Denis Rouzaud

06:30 AM Bug report #9453: ERROR: schema "topology" does not exist

NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7... Sandro Santilli

06:30 AM Bug report #9453: ERROR: schema "topology" does not exist

NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7... Sandro Santilli

06:26 AM Bug report #9453 (Closed): ERROR: schema "topology" does not exist

Fixed in changeset commit:"da4c4292374d049fde2c238a20a0b726ee9cf48d". Sandro Santilli

06:08 AM Bug report #9453: ERROR: schema "topology" does not exist

Sorry for the noise, the version string is extracted using "postgis_version()", not "postgis_full_version()", so can'... Sandro Santilli

04:55 AM Bug report #9453: ERROR: schema "topology" does not exist

Like this (will test after lunch):... Sandro Santilli

04:54 AM Bug report #9453: ERROR: schema "topology" does not exist

Besides, may I suggest to look at the "TOPOLOGY" label in output from postgis_full_version() instead ? Sandro Santilli

04:53 AM Bug report #9453: ERROR: schema "topology" does not exist

Found the bug, is in the function checking for topology support:
+ QgsPostgresResult result = PQexec( "SELECT cou... Sandro Santilli

02:45 AM Bug report #9453 (Reopened): ERROR: schema "topology" does not exist

Sorry but I cannot confirm the fix. Could be a problem on my side but as of f45e112 I still see the error:... Sandro Santilli

05:05 AM Feature request #9479 (Closed): change composer item frame join style to miter join

QGIS is great, and its composer rocks; however, the current frame join style isn't great (see attached map frame), it... Mathieu Pellerin - nIRV

03:39 AM Revision 30f7c4f0 (qgis): [TRANSUP] pl: DlgAutofill

Robert Szczepanek

2014-02-02

11:36 PM Bug report #9430 (Reopened): Disable "Paste Features as New Layer" if empty clipboard

see https://github.com/qgis/QGIS/pull/1140
the paste menu gets enabled as soon as there is something in the clipboar... Denis Rouzaud

11:03 PM Feature request #9451: Create a unified "Add Data" dialog

I'd vote for removing the add layer dialog, after having added all the missing functions to the browser. Paolo Cavallini

09:34 PM Revision d25f85d2 (qgis): add checkbox in db conn dialog in order to keep the window open after a...

Salvatore Larosa

08:59 PM Revision 983b1c95 (qgis): fix #9430 followup 7a9e682

Denis Rouzaud

08:44 PM Revision f80ea493 (qgis): [TRANSUP] sv by Victor

Signed-off-by: Werner Macho <[email protected]> Werner Macho

06:00 PM Feature request #9478 (Closed): offer ubuntugis-based qgis master builds for ubuntu 13.10 (saucy ...

Title says it all. It'd be useful for the qgis.org ubuntugis-based ppa to offer ubuntu saucy qgis master builds as ub... Mathieu Pellerin - nIRV

04:38 PM Bug report #9443 (Reopened): Snapping to guides not working in windows

Nyall Dawson

10:59 AM Revision 6570d397 (qgis): russian translation update

Alexander Bruy

10:56 AM Revision 0a12ee0b (qgis): Merge pull request #1137 from Cracert/i18n

[TRANSUP] pl: QObject, qgsDatum Werner Macho

10:49 AM Feature request #9477 (Closed): GDAL translate: support ESRI rasters folders names as inputs

GDAL translate: conversion of ESRI Raster to tiff has a bug
ESRI rasters are viewed by GDAL as a folder with several... Filipe Dias

10:43 AM Feature request #9476 (Closed): When exporting a composer, use it's name as default filename

Hi !
When you save a composer (as PDF or image...), we could have the composer's name as default filename...
Th... Olivier Dalang

10:06 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

Duplicate of #8298 Salvatore Larosa

10:06 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

Duplicate of #8298 Salvatore Larosa

10:06 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

Duplicate of #8298 Salvatore Larosa

10:06 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

Duplicate of #8298 Salvatore Larosa

10:06 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

Duplicate of #8298 Salvatore Larosa

10:03 AM Bug report #9475 (Feedback): "Recently used coordinate reference systems" listbox doesn't receive...

it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks Giovanni Manghi

10:03 AM Bug report #9475 (Feedback): "Recently used coordinate reference systems" listbox doesn't receive...

it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks Giovanni Manghi

09:49 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...

The Coordinate Reference System Selector has a "Recently used coordinate reference systems" listbox which can be used... Lee Hachadoorian

06:36 AM Revision c859938b (qgis): [TRANSUP] pl: QObject, qgsDatum

Robert Szczepanek

03:23 AM Feature request #9471: attribute table isn't refreshed after save

Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... Vincent Mora

03:23 AM Feature request #9471: attribute table isn't refreshed after save

Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... Vincent Mora

03:06 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Thanks you! Evgeniy Nikulin

01:27 AM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Giovanni Manghi wrote:
> are the fixes already committed in master or to test I have to use Matthias branch?
Yes, th... Salvatore Larosa

01:08 AM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... Giovanni Manghi

01:06 AM Feature request #9458: Add more shortcuts buttons to field calculator and expression builder

Nathan Woodrow wrote:
> I had the idea to allow those buttons to be customized as quick functions via a context menu ... Giovanni Manghi

2014-02-01

03:52 PM Bug report #9474 (Closed): New vertices added to polygons break shape file topology

Consider I have a vector layer with a polygon in it.
Wanting to modify the shape of the polygon I decide to add a n... Attila Szász

01:42 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Hi Matthias,
I just noticed that with large shapefiles (over ~70k features)
when turn off the edit mode and you choo... Salvatore Larosa

01:30 PM Bug report #9470 (Feedback): Cannot remove a group in TOC

Salvatore Larosa

01:01 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Working perfectly now! Thanks Evgeniy.
Cheers
Rhenriques Henriques

12:42 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Evgeniy Nikulin wrote:
> GeometryCopier fixed
Thanks Evgeniy ! Alvaro Huarte

12:02 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

GeometryCopier fixed Evgeniy Nikulin

06:41 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Alvaro
Here it crashes immediately (NB vs ddec663. Maybe it's a Mavericks related issue or another Plug-In relate... Rhenriques Henriques

01:34 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Rhenriques, I tested successly the "Random Points" plugin (doRandPoints.py).
I created a new point shapefile with... Alvaro Huarte

11:18 AM Revision 9ba28b38 (qgis): [composer] Ensure url is correctly loaded for html items on project loa...

Nyall Dawson

11:18 AM Revision a9f4596f (qgis): [composer] Set initial background colour on map items to canvas backgro...

Nyall Dawson

10:54 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...

Very odd! The MemoryLayerSaver (at least the most recent versions) uses a QDataStream to write the data. This corre... Chris Crook

09:12 AM Revision dba34c3d (qgis): Merge pull request #1135 from Cracert/i18n

[TRANSUP] pl Werner Macho

07:38 AM Revision 041244d7 (qgis): [composer] Disable snapping when item is rotated for now (not yet imple...

Nyall Dawson

07:15 AM Revision e0a1d096 (qgis): [composer] Fix snapping during item resize incorrectly snapping to mous...

Nyall Dawson

03:28 AM Revision b6c19916 (qgis): [TRANSUP] pl

Robert Szczepanek

02:18 AM Bug report #9374 (Closed): Print Composer - html frame stays empty when re-opening the project

Fixed in changeset commit:"9ba28b386ffe182044a991ef5f24054dbb1c4c22". Nyall Dawson

02:18 AM Bug report #3811 (Closed): Background color is not set in a composer even if set in project prope...

Fixed in changeset commit:"a9f4596f4d7bf4ae713b8872bafac6f508644e25". Nyall Dawson

02:03 AM Bug report #9445: crash during diagram creation

Hi Matthias,
problem still there (qgis master updated this morning with debian-nightly repo). This the stacktrace:
... matteo ghetta

2014-01-31

12:04 AM Bug report #9443 (Closed): Snapping to guides not working in windows

Fixed in changeset commit:"e0a1d096ad659f8e85a90026441a8b5c0c00953b". Nyall Dawson

10:51 PM Feature request #9451: Create a unified "Add Data" dialog

I have some early mockups that I did a while ago. I'll see if I can dig them up.
Maybe we need to increase the featu... Nathan Woodrow

10:46 PM Feature request #9451: Create a unified "Add Data" dialog

Do we have any mockups for this?
What would be the difference of this in comparison to the browser? Matthias Kuhn

10:48 PM Bug report #9445: crash during diagram creation

Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... Matthias Kuhn

10:48 PM Bug report #9445: crash during diagram creation

Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... Matthias Kuhn

10:42 PM Feature request #9471: attribute table isn't refreshed after save

Hi Vincent,
Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be su... Matthias Kuhn

06:23 AM Feature request #9471 (Open): attribute table isn't refreshed after save

This is an issue when you have underlying triggers that will change the table when you save your modifications.
The ... Vincent Mora

09:40 PM Revision b6f2a922 (qgis): #9454: avoid unnecessarily refresh the map

Alvaro Huarte

05:07 PM Revision 346df986 (qgis): [TRANSUP] danish with new translator added

Signed-off-by: Werner Macho <[email protected]> Werner Macho

04:16 PM Revision 4f443dd3 (qgis): Update OTB processing modules

Alexia Mondot

04:16 PM Revision 7abca16d (qgis): fixes bugs about processing evolution

Alexia Mondot

04:13 PM Revision 128158b3 (qgis): import removed to fix bugs

Alexia Mondot

03:03 PM Revision b834922f (qgis): prevent snapping to non-geometric layers (was leading to multiple logs:...

Denis Rouzaud

03:02 PM Revision dd0849d5 (qgis): delete viminfo from news

Signed-off-by: Werner Macho <[email protected]> Werner Macho

02:59 PM Revision f2b6956a (qgis): [TRANSUP] nb by James

Signed-off-by: Werner Macho <[email protected]> Werner Macho

02:12 PM Revision 6d942e59 (qgis): Dxf export: fix linestyle export for simple line

Marco Hugentobler

12:22 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi, I added a new issue to GeometryCopier plugin for notify it to author:
https://github.com/yellow-sky/GeometryCopie... Alvaro Huarte

05:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Alvaro
So far, in my case, things are behaving normally, after uninstalling the "Geometry copier" plug-in. I'll w... Rhenriques Henriques

02:15 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Rhenriques Henriques wrote:
> Hi again
>
> I've isolated the culprit. This slowness is due to the experimental "Geom... Alvaro Huarte

11:20 AM Revision cdadc701 (qgis): add ParameterMultipleExternalInput parameter type

Alexia Mondot

10:51 AM Bug report #8367 (Closed): "missing font text" red message on layer labeling settings

Hi,
This was already fixed.
Thanks Larry! Pedro Venâncio

09:18 AM Feature request #9473 (Closed): Migrate point diplacement style to new labelling engine

Now the "Point displacement" style doesn't use the new label engine for labelling the diplaced simbol, so the collisi... Luca Lanteri

09:13 AM Revision e8465213 (qgis): Merge pull request #1131 from ahuarte47/Issue_8725R-ST_SnapToGrid

Fix bug #8725R: replace ST_Simplify by ST_SnapToGrid to avoid collapsed geometries by postgis Jürgen Fischer

08:46 AM Revision d050b0a8 (qgis): Merge pull request #1132 from Cracert/i18n

[TRANSUP] pl: qgsComposer Werner Macho

07:37 AM Bug report #9414: Custom CRS with units=mm stored as units=m

Leyan Ouyang wrote:
> I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based ... Andre Joost

03:36 AM Bug report #9414: Custom CRS with units=mm stored as units=m

I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based on my quick tests, it ... Leyan Ouyang

07:10 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...

I guess everything is around NULL handling. On my memory layer working well, NULL are in fact objects <class 'PyQt4.Q... Regis Haubourg

07:01 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...

With memory provider, there is no workaround with varchar.
Pretty serious issue since it ruins the intersest of plug... Regis Haubourg

06:54 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...

Same behaviour when using memory data provider. Strangely, when creating memory layer, all goes well, but when loadin... Regis Haubourg

06:43 AM Feature request #9472 (Closed): Join adjacent lines

This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since... Pedro Venâncio

06:15 AM Bug report #9470: Cannot remove a group in TOC

On Ubuntu 12.04 with today's Master from ubuntugis unstable it works ok. Filipe Dias

05:18 AM Bug report #9470 (Closed): Cannot remove a group in TOC

Rick click on a group - Remove
Work fine with 2.0.1 Rémi Bovard

06:15 AM Bug report #9468: cannot add ring in a polygon

his answer:... Denis Rouzaud

05:28 AM Bug report #9468: cannot add ring in a polygon

Is the geom _MultiPolygon_? Rémi Bovard

02:05 AM Bug report #9468: cannot add ring in a polygon

could not join the video, here it is:
http://youtu.be/d06KI0igcP0
Content:
* add a ring to a fresh polygon in shapef... Denis Rouzaud

01:51 AM Bug report #9468 (Closed): cannot add ring in a polygon

I received a mail from someone having troubles to add ring in polygons on postgis layers.
He tried both 2.0 and maste... Denis Rouzaud

06:13 AM Bug report #9357: Lots of PostGIS connections with a standalone python script

I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi... James Stott

06:13 AM Bug report #9357: Lots of PostGIS connections with a standalone python script

I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi... James Stott

05:14 AM Revision 414d59c5 (qgis): [TRANSUP] pl: qgsComposer

Robert Szczepanek

04:59 AM Feature request #4002: Enhancement: Option to display title in layer panel from wfs/wms plugins

I'm curious about this issue. Displaying the name tag instead of the title tag for wms/wfs layers seems to me as a si... Casper Børgesen

04:05 AM Feature request #8112: GetLegendGraphic URL for each Layer in GetCapa

We are in feature freeze, the pull-request will be merged just after release. I have tested it, and it works fine. René-Luc ReLuc

04:05 AM Feature request #9469 (Rejected): Split lines with points layer

This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since... Pedro Venâncio

04:01 AM Bug report #6407: Sometimes QGIS inserts extra blank lines in the project macros when saving

Hi !
This is probably a duplicate of #7735 Olivier Dalang

03:29 AM Bug report #7826: Server: composer picture does not work with relative path

Does this issue still exists ?
We don't have this issue on Linux/Ubuntu but there are some path issue on windows. René-Luc ReLuc

03:08 AM Bug report #8055: Panels disabled in the customization config are still available in the main menu

Now in master they're also listed in the context menu. Borys Jurgiel

02:57 AM Bug report #8795: Potential WFS filtering issue

Have you tested again ?
If yes and that the bug persists, can you give me accessibility to examples ? René-Luc ReLuc

02:49 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template

I know that there are workarounds but it's still a serious bug.
This "known limitation" is not really "known" by mos... Alessandro Pasotti

02:40 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template

The known limitation is that QGIS-Server needs a fake X server to render HTML in GetPrint.
We use it in production ... René-Luc ReLuc

02:31 AM Bug report #8518: OWS tab - Abstract field of service capabilities adds additional new lines at p...

I can't repeat the bug.
Some one to confirm or infirm it ? René-Luc ReLuc

02:31 AM Bug report #8518: OWS tab - Abstract field of service capabilities adds additional new lines at p...

I can't repeat the bug.
Some one to confirm or infirm it ? René-Luc ReLuc

02:30 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable

A patch has been supplied with a pull-request.
The code change is only 5 lines.
Someone to review ? René-Luc ReLuc

01:57 AM Bug report #9461: Axis order in GML files

I think setting GML_CONSIDER_EPSG_AS_URN to YES by default would help Jeff Konnen

01:51 AM Bug report #9461: Axis order in GML files

See also "[GDAL] GML - Geography Markup Language, section CRS support":http://gdal.org/ogr/drv_gml.html and "[gdal-de... Jürgen Fischer

01:49 AM Revision db1192f1 (qgis): #8725R: Replace ST_Simplify by ST_SnapToGrid

Alvaro Huarte

01:42 AM Bug report #9462 (Feedback): layer.getFeatures on return the first feature

Hi Arnaud,
Can you try to update the statistics for this layer? (Go to the "Add Spatialite Layer" dialog, connect to... Matthias Kuhn

2014-01-30

12:43 AM Bug report #6407: Sometimes QGIS inserts extra blank lines in the project macros when saving

Interesting.
I observed a similar behavior on Windows if you put metadata in text areas with new-lines (e.g. in the ... Andreas Neumann

11:59 PM Revision e4f410b5 (qgis): [ftools] S'part to M'part with non-string columns and NULL values

Fix #8625 Matthias Kuhn

11:05 PM Revision 3fe3bc58 (qgis): [TRANSUP] es by Carlos

Signed-off-by: Werner Macho <[email protected]> Werner Macho

10:30 PM Revision 3ba33d73 (qgis): [attrtable] Only update table at the end of an edit command

Fix #9315 Matthias Kuhn

10:30 PM Revision d378f942 (qgis): [attrtable] No checks when the model is not based on a request

Huge speedup
Fix #9315 Matthias Kuhn

09:12 PM Bug report #9467 (Closed): r.report grass module from processing flawed

r.report module produces a window with a big r.report written. If we save to file, a file with only "r.report" is pro... Rhenriques Henriques

08:53 PM Bug report #8785: Style file not saved in Win 8

I've sporadically run into this before, but it's always gone away after I've shutdown and come back int the morning..... ramon .

08:44 PM Bug report #8785: Style file not saved in Win 8

Same as #7936
Cannot save style from layer made from csv. kilo lima

08:42 PM Bug report #7936: Cannot save Layer Styles

Bug still active in January 2014 weekly (v2.1.0-1) x86. Cannot save styles from a csv, gives no error message. kilo lima

08:04 PM Bug report #9466 (Closed): Print composer - missing string for translation

Second tab in print composer (i.e. Item Properties) is missing for translation. Robert Szczepanek

07:17 PM Revision 70c59498 (qgis): fix QgsGeometry::moveVertex on polygon (fixes #9442)

Jürgen Fischer

06:49 PM Bug report #9465 (Closed): QgsProject's snapSettingsChanged() signal is broken

Hi !
QgsProject's snapSettingsChanged() signal is broken... It's never sent. It seems it must be sent from QgsSnappi... Olivier Dalang

05:49 PM Feature request #7058: Snapping priority - Prioritise vertices over lines

Hi !
This issue seem to have been forgotten, but I find it quite serious (plus probably not too hard to implement).
... Olivier Dalang

05:16 PM Revision db277ce7 (qgis): Fix for hiding deprecated datum transforms

Marco Hugentobler

04:22 PM Revision a4f1470c (qgis): Fix inversion of rotation parameters for epgs datum transformation meth...

Marco Hugentobler

02:59 PM Bug report #8625 (Closed): singlepart to multipart broken in QGIS 2.0/master

Fixed in changeset commit:"e4f410b589c43ce346930fd2523b815741c6257a". Matthias Kuhn

02:49 PM Feature request #9464: Consistent Terminology and Syntax

Perfectly valid request. Matthias Kuhn

02:44 PM Feature request #9464: Consistent Terminology and Syntax

Nothing to be sorry about. Consistency is good. Nathan Woodrow

02:44 PM Feature request #9464: Consistent Terminology and Syntax

Nothing to be sorry about. Consistency is good. Nathan Woodrow

08:48 AM Feature request #9464 (Closed): Consistent Terminology and Syntax

In writing up documentation for a client who will be using QGIS, when adding a new field or column I suggest using th... Nathan Saylor

02:42 PM Revision 4b9e181e (qgis): use python API to get raster extent, instead of relying on gdalinfo

Etienne Tourigny

02:13 PM Revision 1d812b31 (qgis): use python API to get raster SRS, instead of relying on gdalinfo

Etienne Tourigny

02:02 PM Revision 9021b37f (qgis): allow snapping to vertex and segment to remove part/ring

Denis Rouzaud

01:37 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104

Matthias Kuhn

01:37 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104

My propsed fix was based on wrong assumptions, the main reason for the bad performance was not the fix for #9268 but ... Matthias Kuhn

01:33 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104

Fixed in changeset commit:"d378f942a50ad25cc24570e125ea3724e09d79d6". Matthias Kuhn

06:32 AM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

I have created a branch which could potentially fix both issues, but I did not have any time at all to test it.
If s... Matthias Kuhn

01:29 PM Bug report #9414: Custom CRS with units=mm stored as units=m

All units reported by cs2cs -lu should be supported in parsing proj.4 strings in GDAL trunk. See gdal ticket:
http:... kyle -

07:40 AM Bug report #9414: Custom CRS with units=mm stored as units=m

Leyan Ouyang wrote:
> edit: seems it does not work either.
No success on my side too.
Andre Joost

02:41 AM Bug report #9414: Custom CRS with units=mm stored as units=m

This is a limitation in OGR, not in QGis. When creating a custom CRS, QGis just uses the OGR function OSRImportFromPr... Leyan Ouyang

01:06 PM Bug report #5640 (Closed): QGIS says "Spatialite 3.0.1", but Functions that are new in Spatialite...

In QGIS 2.0, Spatialite version 4 is working as expected. Brian Freed

12:24 PM Revision 415b467d (qgis): Fix failing PyQgsBlendModes test

Nyall Dawson

12:24 PM Revision 058cba20 (qgis): [composer] Add some anomoly images for scale bar tests

Nyall Dawson

12:24 PM Revision 78ea81a6 (qgis): [composer] Set the expression context for labels created while atlas pr...

Nyall Dawson

12:24 PM Revision 3994c981 (qgis): [composer] Snap items to page edge, not page outlines or shadow (fix #9...

Nyall Dawson

12:24 PM Revision ffae8acc (qgis): [composer] Fix incorrect calculation of map bounds when a map is switch...

Nyall Dawson

11:49 AM Revision 0f590db0 (qgis): set objectName on QMenu/QAction in C++ core plugins, fixes partially #9134

Radim Blazek

11:39 AM Revision eeae09ce (qgis): Show NTv2 in datum transform dialog tooltip and do case insensitive fil...

Marco Hugentobler

10:52 AM Revision b1d1f105 (qgis): Fix apply null grid shift for source projection string

Marco Hugentobler

10:38 AM Revision c21fc541 (qgis): missing action for add part

Denis Rouzaud

10:18 AM Bug report #9442 (Closed): Digitizing broken in QGIS master

Fixed in changeset commit:"70c594984f71f997fe80335e4eac45f3f488f30d". Jürgen Fischer

07:17 AM Bug report #9442: Digitizing broken in QGIS master

I confirm, It happens with the node tool, and for Postgis (not tested other providers) but for polygons only.
Duplic... Denis Rouzaud

08:44 AM Revision 8bc1dfad (qgis): Merge pull request #1126 from Cracert/i18n

[TRANSUP] pl: qgsVectorLayer, QgsRelation Werner Macho

08:09 AM Bug report #9461: Axis order in GML files

if the SRS is specified like this: urn:ogc:def:crs:EPSG:2169 it is OK, if it is specified like this: EPSG:2169, it is... Jeff Konnen

06:12 AM Bug report #9461 (Closed): Axis order in GML files

Axis order in GML files is still an issue.
I am working with GML files having the data in EPSG:2169.
According to th... Jeff Konnen

07:47 AM Bug report #9463 (Closed): move vertex does not work anymore

Denis Rouzaud

07:18 AM Bug report #9463: move vertex does not work anymore

duplicate #9442 Denis Rouzaud

07:11 AM Bug report #9463 (Closed): move vertex does not work anymore

I can't move a vertex anymore in a polygon.
the problem seems to be here
https://github.com/qgis/QGIS/blob/master/sr... Denis Rouzaud

07:05 AM Bug report #9462 (Closed): layer.getFeatures on return the first feature

When I make iterator, I get only one feature while layer.featureCount() return 28
total = layer.featureCount()
reque... Arnaud Morvan

07:03 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...

Hi Giovanni, yes it works well in the stable version (2.0.1). Labels of features with NULL values in X and Y fields a... Alexandre Neto

05:57 AM Feature request #7878: Windows 8 Location Provider GPS Support

OK thanks!
I hope that Windows 8 Location Provider GPS will be supported by QGIS in near future. Seb Radzimski

03:05 AM Feature request #7878: Windows 8 Location Provider GPS Support

No we are in feature freeze for 2.2 now so it will have to wait until after that. Nathan Woodrow

02:59 AM Feature request #7878: Windows 8 Location Provider GPS Support

I understand. But here is an information that Windows 8 Location Provider GPS Support will be available in QGIS 2.2 (... Seb Radzimski

02:43 AM Feature request #7878: Windows 8 Location Provider GPS Support

No this is a new feature and will have to wait until after the feature freeze. Nathan Woodrow

02:24 AM Feature request #7878: Windows 8 Location Provider GPS Support

I would like to ask if there are any chances to support Windows Location Provider in QGIS 2.2? While using Centrafuse... Seb Radzimski

05:56 AM Revision e150ab16 (qgis): [TRANSUP] pl: qgsVectorLayer, QgsRelation

Robert Szczepanek

05:51 AM Bug report #9460: gdaltools relies on gdalinfo for raster SRS and extent, should use python API

see pull request https://github.com/qgis/QGIS/pull/1129 Etienne Tourigny

05:48 AM Bug report #9460 (Closed): gdaltools relies on gdalinfo for raster SRS and extent, should use pyt...

GdalTools should rely on commandline tools only for complex operations, not basic dataset info.
The SRS and extent q... Etienne Tourigny

05:36 AM Feature request #7051: Option to have Map Tips display on all layers

Moreover, it would be nice to have a general user option to switch on or off maptips.. Regis Haubourg

05:16 AM Feature request #7051: Option to have Map Tips display on all layers

I also agree that Map Tips should act on all visible layers. There is no point in selecting the layer first, as other... Per Gammerath

05:00 AM Feature request #9458: Add more shortcuts buttons to field calculator and expression builder

I had the idea to allow those buttons to be customized as quick functions via a context menu in the tree view. This w... Nathan Woodrow

04:41 AM Feature request #9458 (Open): Add more shortcuts buttons to field calculator and expression builder

It would be very useful to add more shortcuts buttons (ex: AND/OR/etc.) in the field calculator. Giovanni Manghi

04:58 AM Bug report #9459 (Closed): layer fails to render when rule-based symbology make use of $atlasfeat...

In an atlas-defined project, a layer that has a rule-based symbology that relies on the $atlasfeatureid will not rend... Mathieu Pellerin - nIRV

03:29 AM Bug report #6403 (Feedback): link between composer and canvas should use the map-center don't top

If I understand this bug correctly, it's been fixed in master. Are you able to test with a current development versio... Nyall Dawson

03:25 AM Bug report #9455 (Closed): Composer Item snaps to paper's shadow rather than paper

Fixed in changeset commit:"3994c9816a1018d992b0d2308457e7e6c0809586". Nyall Dawson

03:25 AM Bug report #9457 (Closed): while in atlas preview mode, newly inserted label item expressions not...

Fixed in changeset commit:"78ea81a6bd4342e197f95f099aa14a1104978a55". Nyall Dawson

03:00 AM Bug report #9134: customization menu doesn't work

I added objectName to all core C++ plugins in commit:0f590db.
Also various QgisApp::get*Menu() (used by changed to a... Radim Blazek

2014-01-29

11:13 PM Revision 12256f1b (qgis): [TRANSUP] greek by Thodoris

Signed-off-by: Werner Macho <[email protected]> Werner Macho

10:33 PM Revision 5f1c8f49 (qgis): [attrtable] Don't update sort column cache when unaffected

Fix #9424 Matthias Kuhn

09:36 PM Revision bc757ffe (qgis): * fix QgsGeometry::moveVertex for multipolygons()

* add test for QgsGeometry::addPart()
* remove expectedFailure decoration from PyQgsGeometry.testSimplifyIssue4189
* ... Jürgen Fischer

07:51 PM Revision d63104ae (qgis): fix gdaltools getRasterSRS() and use gdalsrsinfo with gdal >= 1.9

Etienne Tourigny

07:27 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

I've tried with NVIDIA proprietary driver, as well as the open source Nouveau driver, and in both cases I can duplica... Mathieu Pellerin - nIRV

04:24 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro: that was with yesterdays nightly, so fairly current dev version. In 2.0.1 I get very fleeting white outs - mu... ramon .

12:03 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> I've recorded a video of the issue, which hopefully might do a better job than my wo... Giovanni Manghi

07:39 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Ok Mathieu, I'll try, but it will be hard for me, I've never used Linux, much less compiled QGIS in Linux Alvaro Huarte

07:19 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro, the log window doesn't throw any error message.
Yes, please, try on linux / ubuntu 13.10, it does seem to be... Mathieu Pellerin - nIRV

04:38 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

I am sorry Mathieu, I do not get to reproduce this behavior.
Can you view error messages in log window please ?
I u... Alvaro Huarte

03:29 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Ok Mathieu, thanks, I study it! Alvaro Huarte

03:06 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

I've recorded a video of the issue, which hopefully might do a better job than my words at explaining the problem; it... Mathieu Pellerin - nIRV

01:21 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Thanks Ramon, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When use... Alvaro Huarte

07:06 PM Bug report #9457 (Closed): while in atlas preview mode, newly inserted label item expressions not...

Steps to reproduce:
1. Open a project that has an atlas setup
2. Open the composer in which you've set up an atlas
3.... Mathieu Pellerin - nIRV

06:56 PM Revision 7456eb79 (qgis): postgres provider: don't look for topology layers without topology supp...

Jürgen Fischer

06:21 PM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...

OK, I can actually reproduce the issue in QGis 2.0.1, so I guess it is not strictly speaking a regression. However, I... Leyan Ouyang

02:58 PM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...

Yes, while a raster layer is being rendered I can not check in legend (the application is locked), but while a vector... Alvaro Huarte

11:55 AM Bug report #9447 (Feedback): Toggling layer visibility sometimes has no effect when using geometr...

Does it happens only with vectors? Giovanni Manghi

01:11 AM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...

Hi Leyan, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When user ch... Alvaro Huarte

06:21 PM Feature request #8845: PDF output types & placement.

I found this link that has more info about PDF placement errors in InDesign.
http://indesignsecrets.com/failed-to-op... James Harvey

06:00 PM Feature request #8845: PDF output types & placement.

I have tested the PDF's created by QGIS on a old Macbook Pro in an old copy of InDesign 3 and they work fine. The iss... James Harvey

05:46 PM Feature request #8845: PDF output types & placement.

I am still having issues with PDF placement. I have also tried the raster PDF output from QGIS, but still get errors ... James Harvey

06:01 PM Revision 62075294 (qgis): identify reprojected raster: use 1x1 pixel context in layer crs to get ...

Radim Blazek

03:58 PM Feature request #9456 (Closed): Improve offset line algorithm

The current line offset algorithm used in line symbol layers is prone to extreme jagged spikes and other rendering er... Nyall Dawson

03:56 PM Bug report #7873 (Closed): Delimited Text Icon has reverted

Seems to no longer be the case. ramon .

03:55 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Thanks Nathan, It was a curious.
Best Regards Alvaro Huarte

03:52 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Like we have in Python. Well layer.getFeatures returns a lazy iterator that only evals when you call next. A bit lik... Nathan Woodrow

03:47 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

In c# we can write a method as...
IEnumerable<QgsFeature> QgsVectorLayer::selectedFeaturesEnum()
{
QgsFeatureRequ... Alvaro Huarte

03:35 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

In C++ or Python.
What are you trying to do? Nathan Woodrow

03:29 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi, I have a question, it is possible use in QGIS/Qt something similar to IEnumerable/IEnumerator interfaces of c# ?
... Alvaro Huarte

03:16 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Nathan Woodrow wrote:
> Or better yet just use `selectedFeaturesCount()`.
You are right, thanks Nathan Alvaro Huarte

03:10 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Ups...
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L126
https://github.com/yello... Alvaro Huarte

03:09 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Or better yet just use `selectedFeaturesCount()`. Nathan Woodrow

03:07 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

I think that the problem is:
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L109
It... Alvaro Huarte

02:57 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi again
I've isolated the culprit. This slowness is due to the experimental "Geometry copier" plug-in by Nikulin Ev... Rhenriques Henriques

02:41 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... Alvaro Huarte

02:40 PM Bug report #9348 (Closed): Selection of thousands of points very slow in QGIS2

Giovanni Manghi

02:39 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi again Alvaro
Definitely a plug-in. I've just disabled all and selection is normal. I'm going to isolate the culpr... Rhenriques Henriques

02:33 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... Giovanni Manghi

02:29 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Try running with @--noplugins@ to check if it is a plugin issue Matthias Kuhn

02:27 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Alvaro
That example is before or after the code modification? Your selection is indeed quicker. Maybe it's an OS ... Rhenriques Henriques

01:51 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Rhenriques, I get "normal" results, I have released a video (~18mb):
http://www.filedropper.com/testissue9348
c... Alvaro Huarte

10:55 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Alvaro
The data that I'm using is restricted. However I've generated a Random 400000 Points layer for the Iberian... Rhenriques Henriques

09:02 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Rhenriques Henriques wrote:
> Hi Alvaro
>
> Thank you so much for taking ongoing this annoying issue. I've made the ... Alvaro Huarte

08:24 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Alvaro
Thank you so much for taking ongoing this annoying issue. I've made the modifications to the xxx.h files i... Rhenriques Henriques

03:20 PM Bug report #9455 (Closed): Composer Item snaps to paper's shadow rather than paper

Hi !
There's a rectangle which represents the shadow of the paper in the composer. When moving objects around, they ... Olivier Dalang

02:54 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Matthias Kuhn wrote:
> I could (partially) revert commit:5c38775 which could probably help here. But this would in tu... Giovanni Manghi

02:51 PM Bug report #9429 (Closed): slow selection of features

Giovanni Manghi

02:44 PM Bug report #9429: slow selection of features

I think so Alvaro Huarte

02:37 PM Bug report #9429: slow selection of features

> But this issue is about other use case.
> I have not closed the issue #9348
the patch proposed has been merged an... Giovanni Manghi

08:36 AM Bug report #9429: slow selection of features

Rhenriques Henriques wrote:
> Be careful because this problem is not solved. Selection remains slow as before in the ... Alvaro Huarte

08:30 AM Bug report #9429 (Reopened): slow selection of features

Be careful because this problem is not solved. Selection remains slow as before in the latest NB. Even with the modif... Rhenriques Henriques

02:04 PM Revision ddec6639 (qgis): Merge pull request #1122 from Cracert/i18n

[TRANSUP] pl: WidgetGradient, QgsRel Werner Macho

02:04 PM Revision 0b882d01 (qgis): Merge pull request #1123 from Jean-Roc/traduction_ui

update fr ui Werner Macho

02:00 PM Revision b1aa21d8 (qgis): update fr ui

Jean-Roc Morreale

01:36 PM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Outch, that was a bad one indeed. Sorry for that. Matthias Kuhn

01:35 PM Bug report #9424 (Closed): Attribute table editing writes simultaneously in the selected column ...

Fixed in changeset commit:"5f1c8f4980e2c6e78a4a49a3994a46e0da2dc059". Matthias Kuhn

11:50 AM Bug report #9424 (Open): Attribute table editing writes simultaneously in the selected column fo...

Giovanni Manghi

12:31 PM Revision ba0a6378 (qgis): Partial fix for #9196 - better handling of bounding boxes of WMS layers

Do not use WGS84 bounding box for all layers - instead use either bounding box
as declared in capabilities document f... Martin Dobias

12:31 PM Revision ec7718b5 (qgis): Second part of fix for #9196 (WMTS)

If WMTS capabilities do not include a bounding box, try to detect it from
tileset matrix information (instead of usin... Martin Dobias

11:54 AM Bug report #7822 (Closed): Export to Spatialite is really slow, compared to commandline ogr2ogr

Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... Giovanni Manghi

11:54 AM Bug report #7822 (Closed): Export to Spatialite is really slow, compared to commandline ogr2ogr

Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... Giovanni Manghi

11:44 AM Feature request #9451: Create a unified "Add Data" dialog

There's also an old ticket #773 for the same thing Martin Dobias

05:01 AM Feature request #9451 (Closed): Create a unified "Add Data" dialog

Create a unified "Add Data" dialog that can be used for any data source. This will significantly improve user experie... Jonathan Moules

11:42 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...

Matthias Kuhn wrote:
> Is this still an issue?
>
> Looking at my earlier comments, I didn't take care of this one: "... Giovanni Manghi

11:37 AM Revision 7a9e6820 (qgis): fix #9430: do not enable copy to layer if nothing to copy

Denis Rouzaud

11:37 AM Bug report #9148 (Feedback): Data Defined Label Locations NULL value doesn't work as expected wit...

Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases? Giovanni Manghi

11:37 AM Bug report #9148 (Feedback): Data Defined Label Locations NULL value doesn't work as expected wit...

Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases? Giovanni Manghi

11:32 AM Bug report #9442 (Open): Digitizing broken in QGIS master

Issued confirmed for shapefiles, PostGIS ok. Giovanni Manghi

04:08 AM Bug report #9442: Digitizing broken in QGIS master

Hi, I can reproduce the issue on my machine (7a9e682),
but only using Polygon features with OGR and Spatialite provi... Salvatore Larosa

02:46 AM Bug report #9442 (Feedback): Digitizing broken in QGIS master

I can't reproduce with today's master on ubuntu Denis Rouzaud

10:02 AM Bug report #9453 (Closed): ERROR: schema "topology" does not exist

Fixed in changeset commit:"7456eb7924edd0a660ca98b3e6d7517bdce2fea8". Jürgen Fischer

08:39 AM Bug report #9453 (Closed): ERROR: schema "topology" does not exist

Metadata tables of topology are queried even if topology is not available, resulting in an error.
This is when connec... Sandro Santilli

09:13 AM Bug report #5896: Identify of WMS layers does not work

Confirmed for points and lines and fixed. Identify tool is now using as context 1x1 pixel box reprojected to layer CR... Radim Blazek

09:03 AM Bug report #5896 (Closed): Identify of WMS layers does not work

Fixed in changeset commit:"62075294638e3716c244371d056797efda125905". Radim Blazek

08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map

This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte

08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map

This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte

08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map

This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte

08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map

This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte

08:46 AM Bug report #9454 (Closed): MapNodeTool unnecessarily refresh the map

When MapNodeTool is active and user changes the selected nodes, it unnecessarily refresh the map Alvaro Huarte

07:38 AM Feature request #6816 (Feedback): Display length and azimuth while digitizing polylines and polygons

there is a new plugin which does this: CadInput [0]
as of today, it is available as an experimental plugin.
[0] http... Denis Rouzaud

07:36 AM Bug report #8873: "Delete Ring" - snap tolerance warning

https://github.com/qgis/QGIS/pull/1127 Denis Rouzaud

05:04 AM Feature request #2490 (Closed): Topological editing for lines

luca76 -

04:15 AM Bug report #9196 (Closed): WMTS and CRS issue

Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias

04:15 AM Bug report #9196 (Closed): WMTS and CRS issue

Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias

04:15 AM Bug report #9196 (Closed): WMTS and CRS issue

Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias

04:13 AM Bug report #9444: WFS client not requesting new features when not-cached

> If you would raise the maxfeaturenumber of your WFS to 10000, I think you would be happy with current 'strategy' :-... Jonathan Moules

04:11 AM Feature request #9450 (Open): New WFS connection option - Max number of features returned

On the WFS "New Connection" - create a new option:
"Maximum Features Returned (if known)" (or some better wording).
... Jonathan Moules

04:10 AM Revision 8c47c0e8 (qgis): [TRANSUP] pl: WidgetGradient, QgsRel

Robert Szczepanek

02:40 AM Bug report #9430 (Closed): Disable "Paste Features as New Layer" if empty clipboard

Fixed in changeset commit:"7a9e6820043d26579d8a07f1ce0adde841f842e7". Denis Rouzaud

02:24 AM Bug report #9441 (Closed): cannot add a 1 segment line part in a multiline layer

Denis Rouzaud

2014-01-28

12:27 AM Bug report #9448 (Closed): New spatialite layer never completes

Same as #8340
alobo -

12:16 AM Bug report #9448 (Closed): New spatialite layer never completes

I try
1. Layer/New spatialite layer
2. Navigate to a directory and name the new layer test
3. Operation never comple... alobo -

11:49 PM Bug report #9429 (Closed): slow selection of features

Alvaro Huarte

11:49 PM Bug report #9429 (Resolved): slow selection of features

Alvaro Huarte

09:56 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu seems to think I can get the error with this data http://www.licadho-cambodia.org/error2.zip.
What I'm seein... ramon .

08:33 PM Revision 00680cd7 (qgis): Merge pull request #1104 from leyan/projectCRS

Consistent management of project CRS properties in project file Marco Hugentobler

07:24 PM Revision 2dabba45 (qgis): gdaltools batch operations: only update progress when there are input f...

Etienne Tourigny

07:04 PM Revision 921510d1 (qgis): gdaltools warp: overwrite existing files when not in batch mode

Etienne Tourigny

06:15 PM Bug report #9447 (Closed): Toggling layer visibility sometimes has no effect when using geometry ...

When I toggle layers visibility from the Layers window, sometimes there is no effect. The checkbox is toggled, but th... Leyan Ouyang

06:02 PM Revision 469bcbf8 (qgis): [TRANSUP] filename change to bring it closer to webpage and documentation

Signed-off-by: Werner Macho <[email protected]> Werner Macho

05:43 PM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

I also met this issue, very confusing to see random data changed in the table, even if the underlying data is not aff... Leyan Ouyang

05:09 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Hi Matthias
> Are you saying, that when you edit an attribute in the attribute table, it should not automatically b... Giovanni Manghi

03:59 AM Bug report #9424 (Feedback): Attribute table editing writes simultaneously in the selected colum...

I am not sure I understand this report.
Are you saying, that when you edit an attribute in the attribute table, it s... Matthias Kuhn

05:21 PM Revision 3256c926 (qgis): Add scale method to data defined size label, related to #8887

Radim Blazek

04:57 PM Revision 8cf9936d (qgis): #9441 add 1 segment line part to multiline layer

Denis Rouzaud

11:34 AM Bug report #9397 (Closed): Project's CRS is not written properly in the project's file

Fixed by leyan in https://github.com/qgis/QGIS/pull/1104 Marco Hugentobler

10:43 AM Revision 17aa0f06 (qgis): Merge pull request #1121 from zjankovic/master

Refreshed CRO translation Werner Macho

10:17 AM Revision 8500e800 (qgis): Refreshed CRO translation

Zoran

09:02 AM Revision ff9c76af (qgis): Merge pull request #1119 from Cracert/i18n

[TRANSUP] pl: ScriptEditor, SettingsDialogPython, Widget.. Werner Macho

08:49 AM Bug report #8887: qgis don't use correctly the map-units in dimension of data-defined-properties ...

There is no bug but it is quite tricky. Data defined size may be used in two modes as area or diameter. Unfortunately... Radim Blazek

08:19 AM Bug report #9148 (Reopened): Data Defined Label Locations NULL value doesn't work as expected wit...

Alexandre Neto

08:16 AM Bug report #9148 (Closed): Data Defined Label Locations NULL value doesn't work as expected with ...

Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,... Alexandre Neto

08:16 AM Bug report #9148 (Closed): Data Defined Label Locations NULL value doesn't work as expected with ...

Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,... Alexandre Neto

08:12 AM Bug report #9446 (Closed): offset tool crashes with multipolygons

to reproduce:
active layer: an editable line layer
enable offset tool
click on a multipolygon feature Denis Rouzaud

07:58 AM Bug report #9441 (Resolved): cannot add a 1 segment line part in a multiline layer

fixed in #8cf9936d44bd2bbc733f3d6e57456f6ca65bd508 Denis Rouzaud

07:30 AM Revision 6d162e68 (qgis): [composer] Update default toolbar positions

Nyall Dawson

07:30 AM Revision 6c3f2ed8 (qgis): [composer] Standardise capitalisation

Nyall Dawson

07:23 AM Bug report #9444: WFS client not requesting new features when not-cached

Hi,
Not all QGIS users are also managing the WFS server they are using so they could raise the server side maxFeatur... Jukka Rahkonen

06:33 AM Bug report #9444: WFS client not requesting new features when not-cached

On second thought, it is not so much a bug in the logic I think, but more that what you want is a different 'refresh ... Richard Duivenvoorde

06:20 AM Bug report #9444: WFS client not requesting new features when not-cached

if I run QGIS in debug mode here on Linux, and load your wfs and pan the view, I see this message:
src/providers/wfs... Richard Duivenvoorde

04:20 AM Bug report #9444: WFS client not requesting new features when not-cached

Hi Richard - I think you're more referring to what I reported in this ticket - #8871 - which is a different thing. I ... Jonathan Moules

01:42 AM Bug report #9444: WFS client not requesting new features when not-cached

sorry for the longread...
I wrote a small blog about this 'problem' http://www.qgis.nl/2013/04/29/qgis-en-wfs-cachin... Richard Duivenvoorde

01:18 AM Bug report #9444: WFS client not requesting new features when not-cached

Everybody can not repeat the issue with these steps but one must zoom to correct area before 2) gives any features. T... Jukka Rahkonen

01:07 AM Bug report #9444: WFS client not requesting new features when not-cached

We have been experiencing the same issue. Datasets of different sizes and with different feature limits all have this... Neil Benny

04:33 AM Revision 7df74aea (qgis): [TRANSUP] pl: ScriptEditor, SettingsDialogPython, Widget..

Robert Szczepanek

04:08 AM Bug report #8481 (Feedback): "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is...

Is this still an issue?
Looking at my earlier comments, I didn't take care of this one: "Postgres: Field length and ... Matthias Kuhn

03:55 AM Bug report #9445 (Closed): crash during diagram creation

Hi,
qgis crashes when trying to create histogram diagram (no matter which variables or how many variables).
No probl... matteo ghetta

03:52 AM Bug report #9431 (Feedback): Crash When Using Relationships with Large PostGIS Tables

Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... Matthias Kuhn

03:52 AM Bug report #9431 (Feedback): Crash When Using Relationships with Large PostGIS Tables

Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... Matthias Kuhn

02:13 AM Bug report #9348 (Feedback): Selection of thousands of points very slow in QGIS2

Alvaro Huarte

01:36 AM Bug report #9439: QGIS sends requests for layers when scrolling

I have seen this before. OpenJUMP used to do the same. Adding a timer that waits for 0.7 seconds resolved the issue. ... Jukka Rahkonen

2014-01-27

12:26 AM Revision d647354a (qgis): sip fixes

Jürgen Fischer

12:20 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Mathieu, to try reproduce the error, please can you send me the situation on the map? (windows size, map center po... Alvaro Huarte

08:28 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro, the layer gone missing is definitively linked to on the fly reprojection between ESPG:3148 (meter-based) to E... Mathieu Pellerin - nIRV

12:19 AM Bug report #9444 (Closed): WFS client not requesting new features when not-cached

Might be a regression.
1) Add http://maps.warwickshire.gov.uk/gs/ows as a WFS service
2) Add "Street Lights" - unche... Jonathan Moules

08:27 PM Revision c4b4d6f2 (qgis): german translation update and translation string fix

Jürgen Fischer

04:41 PM Revision 6331e70e (qgis): Update of IT GUI translation - thanks Stefano Campus

Paolo Cavallini

04:08 PM Bug report #9443 (Closed): Snapping to guides not working in windows

In windows the snapping to guides is not snapping to the guides.
http://osgeo-org.1560.x6.nabble.com/Guides-and-grid... ramon .

03:59 PM Feature request #9381: Print composer: add option for point grid

Is a point grid like in the attached file?
(Yep, I know the red dots are big and glary, but that can be changed) ramon .

02:59 PM Revision d0d55818 (qgis): Merge pull request #1117 from asiersarasua/master

Basque translation update Werner Macho

02:27 PM Bug report #9375 (Feedback): Simplification causes GEOS exceptions when layer has labels

Alvaro Huarte

02:01 PM Revision a8463aa0 (qgis): Basque translation update

Asier Sarasua

01:55 PM Revision 7b21c727 (qgis): Fix windows build

Nathan Woodrow

01:54 PM Revision eb9a22e9 (qgis): Dump CASE correctly in QgsExpression::dump()

Nathan Woodrow

01:13 PM Revision 578a83a0 (qgis): Drop margins on expression builder

Nathan Woodrow

12:12 PM Revision d876ea2a (qgis): [composer] fixed composer legends inappropriately connected to the firs...

Olivier Dalang

12:11 PM Revision 177e5a19 (qgis): [composer] ComposerLegend update all now only applies to referenced map...

Olivier Dalang

11:41 AM Revision cac7790e (qgis): Typo fix, thanx to Carlos

Signed-off-by: Werner Macho <[email protected]> Werner Macho

11:19 AM Bug report #8600: QGIS 2.0 not working with NTLM proxy

Yes before the switch happened in the plugin manager NTLM worked for downloading plugins. Other core web access funct... Jeremy Palmer

03:47 AM Bug report #8600 (Feedback): QGIS 2.0 not working with NTLM proxy

Hi Jeremy,
is this really a regression or it wasn't supported either on older qgis releases?
The blocker tag is res... Giovanni Manghi

09:30 AM Revision b49dda69 (qgis): sip documentation fix

Jürgen Fischer

09:22 AM Revision 74e7314c (qgis): update sip bindings II

Jürgen Fischer

08:45 AM Revision 08405c51 (qgis): Merge pull request #1115 from Cracert/i18n

[TRANSUP] pl Werner Macho

08:13 AM Bug report #9442 (Closed): Digitizing broken in QGIS master

It seems that editing broke in QGIS master
Testing on
2.1.0+git20140126+55727f7~precise-ubuntugis1
Trying move a ... Giovanni Manghi

08:00 AM Bug report #9441: cannot add a 1 segment line part in a multiline layer

new part's geometry is invalid -- to be more precise Denis Rouzaud

07:59 AM Bug report #9441 (Closed): cannot add a 1 segment line part in a multiline layer

trying to add a 1 segment line part to a feature in a multiline layer gives "invalid geometry" after right clicking. Denis Rouzaud

07:52 AM Bug report #9440 (Open): Do not show DB geometric columns in table view

When there is only one column in a database table, it is displayed on the canvas, and nothing is shown on the table i... Paolo Cavallini

07:05 AM Feature request #4852: Add gdal2xyz.py to GdalTools

There are still reasons not to do so:
* Processing is not always 100% stable
* GDALTools shows the gdal command line,... Paolo Cavallini

07:01 AM Feature request #4852: Add gdal2xyz.py to GdalTools

How about porting gdaltools to processing toolbox (those that do not have an equivalent) and removing gdaltool? Etienne Tourigny

03:58 AM Feature request #4852: Add gdal2xyz.py to GdalTools

oh, right, I had forgot about it :) Giovanni Manghi

03:57 AM Feature request #4852 (Closed): Add gdal2xyz.py to GdalTools

gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago Alexander Bruy

03:57 AM Feature request #4852 (Closed): Add gdal2xyz.py to GdalTools

gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago Alexander Bruy

02:46 AM Feature request #4852: Add gdal2xyz.py to GdalTools

Antonio Locandro wrote:
> any updates? do you think this could be done for 2.2 or 2.4
it should be relatively easy t... Giovanni Manghi

06:49 AM Revision 41dd3d69 (qgis): [TRANSUP] pl

Robert Szczepanek

06:08 AM Bug report #9439 (Closed): QGIS sends requests for layers when scrolling

The following certainly happens with WMS, WCS, WMTS. Probably happens with other data providers, but they don't log a... Jonathan Moules

05:34 AM Bug report #9438 (Closed): WMS CRS listed multiple times

Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... Jonathan Moules

05:28 AM Bug report #9437: WMS Client getting WGS84 BBOX wrong

Might be related to #6941 and/or #9196 Jonathan Moules

05:25 AM Bug report #9437 (Closed): WMS Client getting WGS84 BBOX wrong

Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... Jonathan Moules

05:14 AM Feature request #8898: "Save vector layer as" - limit export

I like the "Extent" functionality on the "Save Raster layer as" dialog. Could that not be used/replicated?
That gets... Jonathan Moules

02:06 AM Feature request #8898: "Save vector layer as" - limit export

For the extent-based export, there are two options:
1. have just a checkbox ("Export only features visible in map can... Martin Dobias

04:59 AM Bug report #9436 (Closed): QGIS locks up while waiting for WMS response

For whatever reason, my WMS server isn't responding to queries at all (timeout).
To replicate: Requires Non-functioni... Jonathan Moules

04:41 AM Bug report #6212: Incorrect sorting of uppercase and accented words in the "Style -> Categorized"...

Confirmed as fixed. Jonathan Moules

04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)

Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... Julien LARSENEUR

04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)

Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... Julien LARSENEUR

04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)

Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... Julien LARSENEUR

04:35 AM Bug report #8870: "Metadata" for WMS/WFS/etc? layer issues

Note: Apparently these fields are for user metadata. My question then is - why? They can be easily automatically popu... Jonathan Moules

03:48 AM Feature request #9435 (Open): Simplification of layers when exporting composition to svg

QGIS should have an option to simplify map layers when exporting to svg. Otherwise complex map layers result in svg s... Nyall Dawson

03:37 AM Bug report #9415 (Closed): Problem with current Debian build

Fixed in latest master version.
Andy Wood

03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly

There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek

03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly

There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek

03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly

There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek

03:21 AM Bug report #7177 (Closed): Composer's legend "all" button does not take "lock layers" into account

Fixed in changeset commit:"177e5a195249f0ebae68c7a76acebb0fb95b7d36". Olivier Dalang

03:14 AM Bug report #9060: Area is wrong in QGIS master (again)

Alvaro Huarte wrote:
> Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The cur... Giovanni Manghi

03:05 AM Bug report #5758: Primary key issue when using merge attributes of selected features tool

This is the error I get when trying to save my changes:
Could not commit changes to layer sgev... Alexandre Neto

03:02 AM Bug report #5758 (Reopened): Primary key issue when using merge attributes of selected features tool

I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... Alexandre Neto

03:02 AM Bug report #5758 (Reopened): Primary key issue when using merge attributes of selected features tool

I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... Alexandre Neto

02:52 AM Feature request #8537 (Closed): snap when measuring

I can confirm that snapping works (at least on master) also for measuring tools. Giovanni Manghi

02:52 AM Feature request #8537 (Closed): snap when measuring

I can confirm that snapping works (at least on master) also for measuring tools. Giovanni Manghi

02:51 AM Feature request #8495: lat-long graticule on projected map

Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... Giovanni Manghi

02:51 AM Feature request #8495: lat-long graticule on projected map

Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... Giovanni Manghi

02:47 AM Feature request #7208: replace the "merge shapefiles" code with new more efficient one (python co...

Antonio Locandro wrote:
> Any updates on this?
nope. Giovanni Manghi

02:44 AM Bug report #5896: Identify of WMS layers does not work

> I added a new description/title to this ticket to makes things a little more clear. It seems that overall things a... Giovanni Manghi

02:39 AM Revision af1bdf66 (qgis): Merge pull request #1114 from ahuarte47/Issue_9429

Fix bug #9429: no validate featureIds using all feature collection Nathan Woodrow

02:33 AM Revision 624ef2f1 (qgis): #9429: no validate featureIds using all feature collection

Alvaro Huarte

02:17 AM Bug report #9433: Error in DB Manager reading toplogy.layer

No idea, sorry - I just noticed that the error is gone when connecting from master Paolo Cavallini

02:14 AM Bug report #9433: Error in DB Manager reading toplogy.layer

No backport ?

:'(
Any pointer to the fixing commit, in case anyone is willing to backport ? Sandro Santilli

01:54 AM Bug report #9433: Error in DB Manager reading toplogy.layer

Yes. However, a test revealed that in master the problem does not show off. As no backporting will be done, I think t... Paolo Cavallini

01:44 AM Bug report #9433: Error in DB Manager reading toplogy.layer

Does the user you connect as have permissions to read topology.layer ? Sandro Santilli

01:20 AM Bug report #9433 (Closed): Error in DB Manager reading toplogy.layer

Clicking on topology.layer of a postgis_topology DB consistently returns
an error. PostGIS 2.1.1. Tested on Debian un... Paolo Cavallini

02:05 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

I do not test this case use, but this patch
https://github.com/qgis/QGIS/pull/1114
can fix this issue
Alvaro
Alvaro Huarte

02:02 AM Feature request #4136 (Closed): Symbolizing field from a table joined to a joined table

Bernhard Ströbl

01:57 AM Bug report #7780: Incorrect number of rows when testing layer filter expression

I would not mind passing this issue to "Feature". And if there is no better solution, we could inform the user that h... Alexandre Neto

01:45 AM Bug report #9434 (Closed): DB Manager versioning: language "SQL" does not exist

Activating versioning in DB Manager throws an error:
language "SQL" does not exist
QGIS 2.0.1, on Debian and Window... Paolo Cavallini

01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...

Seems fixed. Please reopen if necessary. Paolo Cavallini

01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...

Seems fixed. Please reopen if necessary. Paolo Cavallini

01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...

Seems fixed. Please reopen if necessary. Paolo Cavallini

01:32 AM Feature request #6985 (Closed): Export print layout as image with world file

AFAIK, this has been implemented. Reopen if necessary. Paolo Cavallini

01:32 AM Feature request #6985 (Closed): Export print layout as image with world file

AFAIK, this has been implemented. Reopen if necessary. Paolo Cavallini

01:19 AM Feature request #8868: Don't show provider specific layer data source string

Then to avoid more confusion I suggest to just remove the whole "Layer source" field.
Currently the is no universal ... Martin Dobias

2014-01-26

12:50 AM Bug report #9429: slow selection of features

Hi Alvaro, thanks for looking into this long standing and painful issue.
Does this
#9348
duplicates this ticket?
... Giovanni Manghi

11:58 PM Bug report #9429 (Reopened): slow selection of features

Reopened to enable ids validation in new optional parameter:
QgsVectorLayer::setSelectedFeatures( const QgsFeatureId... Alvaro Huarte

05:45 PM Bug report #9429 (Closed): slow selection of features

Alvaro Huarte

05:35 PM Bug report #9429: slow selection of features

Nathan Woodrow wrote:
> I agree the check is not needed. We have the ids and if they are not in the layer then they j... Alvaro Huarte

05:16 PM Bug report #9429: slow selection of features

I agree the check is not needed. We have the ids and if they are not in the layer then they just don't get selected n... Nathan Woodrow

04:42 PM Bug report #9429 (Closed): slow selection of features

Any selection of features in QGIS calls to 'QgsVectorLayer::setSelectedFeatures' and from this commit (#39fab67e602aa... Alvaro Huarte

12:49 AM Bug report #5896: Identify of WMS layers does not work

Radim Blazek wrote:
> The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by co... Giovanni Manghi

12:46 AM Bug report #9432 (Closed): Points In Polygons: New column should be integer not real

Maybe I'm missing something, but if we are doing a count the result will always be a whole number so the data type of... Chris Brown

12:09 AM Bug report #9431: Crash When Using Relationships with Large PostGIS Tables

Jeremy - I am not the developer of this feature. But yes - currently, the tables are all fetched to the client and th... Andreas Neumann

06:08 PM Bug report #9431 (Closed): Crash When Using Relationships with Large PostGIS Tables

Does this feature support large relationship tables from a database? I tried to build a relationship between PostgreS... Jeremy Palmer

11:23 PM Bug report #9050 (Closed): Cannot add a scalebar in meters of project is wgs84

I'll close this issue as it's implemented in master.
However, the implementation is currently somewhat confusing as ... Mathieu Pellerin - nIRV

11:20 PM Bug report #9050 (Feedback): Cannot add a scalebar in meters of project is wgs84

Isn't this fixed in master? Paolo Cavallini

04:40 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84

This kind of behaviour is available in other COTS software, I don't know if people actually pay attention that it cou... Antonio Locandro

11:20 PM Feature request #8537: snap when measuring

The snap settings are taken from digitizing options Paolo Cavallini

05:12 PM Feature request #8537: snap when measuring

@paolo, how do you enable this? I tried measurement yesterday and it didn't snap at all. I was under the impression t... Antonio Locandro

11:11 PM Bug report #8068: Wrong font display in qgis server

It's blocker. We can not use the server > 1.8. Evgeniy Nikulin

06:36 PM Revision d4e36941 (qgis): update sip bindings

Jürgen Fischer

06:14 PM Feature request #8711: Please add decent North arrows

Hi !
A google-images search on "north arrows" gives a lot of ideas.
Please add only very simple, clean and pro-loo... Olivier Dalang

05:14 PM Feature request #8711: Please add decent North arrows

I guess adding arrows would mean generating SVG for them right? If someone can point me in the right direction and pr... Antonio Locandro

06:04 PM Revision 3c5c7de3 (qgis): Fixed point pattern fill usedAttributes(), fixes #7736

Radim Blazek

05:59 PM Bug report #9371: Paste Features as New Vector Layer/New Memory Vector layer fails with bigint co...

I also get a problem with int4 columns from a PostGIS source. Error is "Cannot create field id (int4,int)". PostGIS s... Jeremy Palmer

05:26 PM Bug report #9430 (Closed): Disable "Paste Features as New Layer" if empty clipboard

The new "paste features as new layer" feature should be disabled if the clipboard is empty.
Also see #9083
In addit... Jeremy Palmer

05:16 PM Feature request #9381: Print composer: add option for point grid

I think a few more options should be added apart from what its proposed, currently only zebra option and another I ca... Antonio Locandro

05:11 PM Feature request #8495: lat-long graticule on projected map

Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected map in other COTS software,... Antonio Locandro

05:08 PM Feature request #7208: replace the "merge shapefiles" code with new more efficient one (python co...

Any updates on this? Antonio Locandro

05:07 PM Feature request #6499: Allow choose the default measurement units to use

Yes I think this would be useful Antonio Locandro

05:05 PM Feature request #5516: Better sorting of menus

I would think the new UI/UX user list would be able to comment on this topic and reach a resolution, hopefully for 2.... Antonio Locandro

05:04 PM Feature request #4950: Progress bar when export print-layout to image/pdf

I think this would be an awesome addition, maybe Nyall can look into it Antonio Locandro

05:03 PM Feature request #4852: Add gdal2xyz.py to GdalTools

any updates? do you think this could be done for 2.2 or 2.4 Antonio Locandro

03:23 PM Bug report #9060: Area is wrong in QGIS master (again)

Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The current settings are prese... Alvaro Huarte

02:01 PM Bug report #9060 (Feedback): Area is wrong in QGIS master (again)

Rhenriques Henriques wrote:
> Nyall is right! I've only tested in projects with projected units. The settings are not... Giovanni Manghi

03:12 PM Revision 742f49f0 (qgis): russian translation update

Alexander Bruy

03:10 PM Bug report #8818: "value map" widget broken

> Alvaro Huarte wrote:
> > One question about another issue:
> > Why QGIS does not draw current selected features as ... Alvaro Huarte

12:56 PM Bug report #8818: "value map" widget broken

Giovanni Manghi wrote:
> ... I have seen the correct values (the ones defined in the "value" column of the map), but... Alvaro Huarte

02:48 AM Bug report #8818: "value map" widget broken

Alvaro Huarte wrote:
> >
> > I have tested your patched QGIS and unfortunately it is still not working.
>
> Very we... Giovanni Manghi

02:31 PM Bug report #9169 (Closed): Grass raster values not identified properly

closing for lack of feedback Giovanni Manghi

02:31 PM Bug report #9169 (Closed): Grass raster values not identified properly

closing for lack of feedback Giovanni Manghi

02:30 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

I could (partially) revert commit:5c38775 which could probably help here. But this would in turn reintroduce bug #926... Matthias Kuhn

02:16 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Matthias Kuhn wrote:
> Is it a regression?
it seems faster in qgis 2.0.1 Giovanni Manghi

01:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

Is it a regression? Matthias Kuhn

01:41 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... Giovanni Manghi

01:41 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... Giovanni Manghi

02:25 PM Bug report #8451 (Closed): "Transform error caught: forward transform of..." while editing on qgi...

The original issue described in this ticket seems gone in the latest master. Giovanni Manghi

02:25 PM Bug report #8451 (Closed): "Transform error caught: forward transform of..." while editing on qgi...

The original issue described in this ticket seems gone in the latest master. Giovanni Manghi

12:37 PM Bug report #9112 (Closed): QGIS master crashes on Linux when editing Spatialite layers with OTFR on

seems to work as expected on the latest master. Giovanni Manghi

12:37 PM Bug report #9112 (Closed): QGIS master crashes on Linux when editing Spatialite layers with OTFR on

seems to work as expected on the latest master. Giovanni Manghi

12:31 PM Bug report #7209 (Closed): WCS client seems broken

Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... Giovanni Manghi

12:31 PM Bug report #7209 (Closed): WCS client seems broken

Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... Giovanni Manghi

12:28 PM Bug report #7822 (Open): Export to Spatialite is really slow, compared to commandline ogr2ogr

Alexander Bruy wrote:
> Still cannot confirm. Export takes several seconds.
Hi Alex,
I can confirm the issue at so... Giovanni Manghi

12:03 PM Bug report #8820 (Closed): "Value map" edit widget appears to have the value of the first value i...

seems ok on master. Please reopen if necessary. Giovanni Manghi

12:03 PM Bug report #8820 (Closed): "Value map" edit widget appears to have the value of the first value i...

seems ok on master. Please reopen if necessary. Giovanni Manghi

11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps

I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. Giovanni Manghi

11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps

I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. Giovanni Manghi

11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps

I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. Giovanni Manghi

11:51 AM Revision f4a7fcb7 (qgis): render missing SVG symbol (?) if SVG file does not exist

Radim Blazek

11:34 AM Bug report #9088 (Open): Text Annotation Symbols size is wrong in map composer

Giovanni Manghi

11:32 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... Giovanni Manghi

11:24 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... Alvaro Huarte

05:45 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...

Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105ecfa8. Disabling simplify geometr... Mathieu Pellerin - nIRV

11:22 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons

Closing for lack of feedback/sample data to replicate. Giovanni Manghi

11:22 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons

Closing for lack of feedback/sample data to replicate. Giovanni Manghi

11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi... Giovanni Manghi

11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi... Giovanni Manghi

11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi... Giovanni Manghi

11:18 AM Revision 55727f75 (qgis): Support SVG relative paths in SVG cache to enable relative data defined...

Radim Blazek

11:02 AM Bug report #8734 (Closed): Bug on dfx2shp plugin

Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... Giovanni Manghi

11:02 AM Bug report #8734 (Closed): Bug on dfx2shp plugin

Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... Giovanni Manghi

10:58 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer

Still true? Giovanni Manghi

10:58 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer

Still true? Giovanni Manghi

10:56 AM Bug report #8332 (Open): QGIS uses comma as decimal separator for shapefile attribute data

Giovanni Manghi

10:54 AM Bug report #8707 (Closed): Doens't load most of the layers.

Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary. Giovanni Manghi

10:54 AM Bug report #8707 (Closed): Doens't load most of the layers.

Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary. Giovanni Manghi

10:51 AM Bug report #7624 (Closed): QGIS crashes when pressing OK on the heatmap dialog

Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... Giovanni Manghi

10:51 AM Bug report #7624 (Closed): QGIS crashes when pressing OK on the heatmap dialog

Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... Giovanni Manghi

10:45 AM Revision 667e0671 (qgis): Merge pull request #1111 from Cracert/i18n

[TRANSUP] pl: plugin manager, options Werner Macho

10:45 AM Revision 16773ae8 (qgis): [TRANSUP] es by carlos, hu by Zoltan, nl by Raymond and Richard

Signed-off-by: Werner Macho <[email protected]> Werner Macho

10:41 AM Bug report #8979 (Open): Crashing WFS in 32bit Windows Install

Giovanni Manghi

10:39 AM Bug report #8438 (Open): WMT-S Crashes when loading layer

Giovanni Manghi

10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool

Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... Giovanni Manghi

10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool

Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... Giovanni Manghi

10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool

Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... Giovanni Manghi

10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool

Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... Giovanni Manghi

10:24 AM Bug report #5239 (Open): TIN interpolation causes crash

Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... Giovanni Manghi

10:24 AM Bug report #5239 (Open): TIN interpolation causes crash

Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... Giovanni Manghi

10:17 AM Bug report #8821 (Closed): bug print, create pdf and pictures

closing for lack of details, impossible to understand precisely what is the issue and how replicate it. Giovanni Manghi

10:17 AM Bug report #8821 (Closed): bug print, create pdf and pictures

closing for lack of details, impossible to understand precisely what is the issue and how replicate it. Giovanni Manghi

10:13 AM Bug report #7113 (Closed): QGS project files containing openlayers layers make QGIS crash when op...

Giovanni Manghi

10:12 AM Bug report #7113: QGS project files containing openlayers layers make QGIS crash when openlayers ...

closing for lack of feedback. Giovanni Manghi

10:13 AM Bug report #7607 (Closed): Crash after importing a vector layer to db using DBManager

Giovanni Manghi

10:13 AM Bug report #7607: Crash after importing a vector layer to db using DBManager

closing for lack of feedback. Giovanni Manghi

09:23 AM Bug report #9428 (Open): Transparency of markers in marker line is neither applied nor stored

The GUI for markers in a marker line has a transparency slider but the setting is not applied to the markers in the p... Anita Graser

09:06 AM Bug report #7736 (Closed): data defined rotation does not work for point pattern fills

Fixed in changeset commit:"3c5c7de3023c9ec2e9daa4d74b4846fd3e35caad". Radim Blazek

08:28 AM Bug report #7177: Composer's legend "all" button does not take "lock layers" into account

Done in pull request https://github.com/qgis/QGIS/pull/1113 Olivier Dalang

06:21 AM Bug report #9427 (Closed): Legend and scale refer to "Map 3", but there is no way to know which o...

Hi !
Composer Legends and Composer Scales refer to a particular map.
This map is selected by the user with a drop d... Olivier Dalang

06:00 AM Bug report #9397: Project's CRS is not written properly in the project's file

Great, thanks ! I set done to 100% and hope it will be merged soon ! Olivier Dalang

04:28 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master

Giovanni Manghi wrote:
> >
> > Hi Giovanni, if I create the spatial index and update the extent from layer properti... Alvaro Huarte

04:24 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master

Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... Giovanni Manghi

04:24 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master

Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... Giovanni Manghi

04:17 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master

Giovanni Manghi wrote:
> after making a whatever editing operation the vectors do render correctly, so maybe after al... Alvaro Huarte

02:27 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master

Hi, I have tested the data and ArcView 3.1 crash! I edited the code for QGIS does not use the current map extent to f... Alvaro Huarte

02:01 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master

after making a whatever editing operation the vectors do render correctly, so maybe after all is a data issue(?). Not... Giovanni Manghi

01:32 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master

I just compiled from source the latest code and have issues with the attached vectors (try zoom in).
This does not s... Giovanni Manghi

02:56 AM Bug report #8883: The svg path don't work on datadefined property - SVG file

In commit:f4a7fcb I also added rendering of missing SVG symbol, currently question mark ('?'), in case an SVG file do... Radim Blazek

02:19 AM Bug report #8883 (Closed): The svg path don't work on datadefined property - SVG file

Fixed in changeset commit:"55727f755afac80243433141d8ae74bf2b5734db". Radim Blazek

01:54 AM Bug report #9425: grass_script.bat always fails if USERNAME contains MBCS

I'm sorry, the report explains 2 bugs.
Former is "Windows batch file which ends LF can't process MBCS". Attached patc... Tarot Osuji

01:27 AM Bug report #9425 (Closed): grass_script.bat always fails if USERNAME contains MBCS

On Windows, if USERNAME contains Multi Byte Character Set, processing with GRASS (grass_script.bat) always fails.
The... Tarot Osuji

01:53 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

please note that the values in the column used for ordering are not (over)written after pressing "save", anyway even ... Giovanni Manghi

01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi

01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi

01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi

01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting

Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi

01:46 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master

If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... Giovanni Manghi

01:46 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master

If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... Giovanni Manghi

01:28 AM Bug report #8487 (Closed): manual CRS being overwritten by QGIS

Giovanni Manghi

01:24 AM Bug report #8487: manual CRS being overwritten by QGIS

Yes you can close it, thanks all. The original issue as well as the related issues brought up in the discussion are a... Gavin Fleming

01:10 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian

Further info: loaded rasters can in general be loaded, whereas those resulting from in-db elaborations (e.g., aspect ... Paolo Cavallini

2014-01-25

12:49 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian

I can show rasters, except for those registered out-of-db (-R) Paolo Cavallini

11:32 PM Revision 105ecfa8 (qgis): make sure the symbology-ng db can be copied in qgis_stylev2test

Jürgen Fischer

09:38 PM Revision 587be8cd (qgis): debian packaging fix

Jürgen Fischer

03:49 PM Revision ce346419 (qgis): remove leading dir separator from symbol path when it's relative,

SLD: remove file schema from OnlineResource tag's path Giuseppe Sucameli

03:03 PM Bug report #9424 (Closed): Attribute table editing writes simultaneously in the selected column ...

When editing the Attribute table of a vector layer writing the value in a column will automatically update that value... Bogdan Hlevca

02:36 PM Revision b90fb29e (qgis): Backport fix for mis-detection of PostGIS table types (#9421)

Don't try to detect geometry type or srid, if it's already known
Backport of eaf5725f569fab62a67a51c0b0bddbb6a44797a2... Sandro Santilli

01:33 PM Revision b399c1e1 (qgis): use qIsNaN to test for NaNs

Jürgen Fischer

01:33 PM Revision 6b1bc026 (qgis): update CODING, regenerate t2t, include CODING.html

Jürgen Fischer

11:28 AM Revision 5a2beb36 (qgis): fix doxygen warnings

Jürgen Fischer

10:53 AM Feature request #9373: Support for UDP connections in GPS Widget

Dear all:
I've made a PR !#1112 regarding to this issue. I hope that everything is OK, but I have some doubts with t... jtornero -

10:28 AM Revision 781e34a5 (qgis): fix QgsGeometry::asMultiPoint() (followup 6bbd17c2; fixes #9423)

Jürgen Fischer

09:00 AM Bug report #6212 (Closed): Incorrect sorting of uppercase and accented words in the "Style -> Cat...

Reopen if necessary. Giovanni Manghi

09:00 AM Bug report #6212 (Closed): Incorrect sorting of uppercase and accented words in the "Style -> Cat...

Reopen if necessary. Giovanni Manghi

02:59 AM Bug report #6212: Incorrect sorting of uppercase and accented words in the "Style -> Categorized"...

Actually I cannot confirm in master - for me the sorting is case insensitive and respects accented characters (see at... Martin Dobias

05:36 AM Revision c27d499f (qgis): [TRANSUP] pl: plugin manager, options

Robert Szczepanek

04:25 AM Bug report #8818: "value map" widget broken

>
> I have tested your patched QGIS and unfortunately it is still not working.
Very weird! I follow step by step yo... Alvaro Huarte

01:09 AM Bug report #8818 (Open): "value map" widget broken

> Done:
> http://www.filedropper.com/qgis-osgeo4w-210-i8818-setup-x86
Hi Alvaro, many thanks for your time!
I hav... Giovanni Manghi

03:06 AM Revision 9439eb86 (qgis): Fix globe plugin crash at launch on Mac

Larry Shaffer

02:12 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

greatest, latest, and most regressing one ... (assumption, not verified, but made with high experience of the matter) Sandro Santilli

02:10 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

Sandro, considering QGIS 2.2 is (planned) to be released in less than a month, might simply be better to update to th... Mathieu Pellerin - nIRV

02:07 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

Could this be backported to 2.0 branch too ? Sandro Santilli

01:38 AM Bug report #8975 (Closed): line pattern fill: the style is applied to symbol border and not to li...

Giovanni Manghi

01:28 AM Bug report #9423 (Closed): QgsGeometry.asMultiPoint() returns wrong values

Fixed in changeset commit:"781e34a5bc690df4c1868bbc1b35cfdda0eb25da". Jürgen Fischer

01:15 AM Bug report #9423: QgsGeometry.asMultiPoint() returns wrong values

QGIS 2.0.1 also returns correct values. I get wrong results with master version (eaf5725). Minoru Akagi

01:09 AM Bug report #9423 (Closed): QgsGeometry.asMultiPoint() returns wrong values

Tested with this code:... Minoru Akagi

01:18 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)

If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th... Giovanni Manghi

01:18 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)

If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th... Giovanni Manghi

2014-01-24

12:59 AM Revision eaf5725f (qgis): postgres provider: don't try to detect geometry type or srid, if it's a...

Jürgen Fischer

12:36 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Agreed, no migration should be necessary Paolo Cavallini

10:02 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

> I am leaving this open for this last problem, but I am not going to fix that.
I'm personally ok with this. When a... Giovanni Manghi

09:42 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Regarding backward compatibility. This was obviously buggy in 2.0 and I am not convinced that we have to keep backwar... Radim Blazek

09:07 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Vertical and horizontal markers lines fixed in commit:c21973f.
The longest interval is taken as pattern length. Smal... Radim Blazek

07:34 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Color/width: removed from QgsLinePatternFillSymbolLayerWidget in commit:95c3c6f because such options (for sub symbols... Radim Blazek

03:43 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

This issue has common background with #8974, some problems you may find testing this issue were fixed there. Radim Blazek

10:56 PM Revision 72988e9a (qgis): fix windows build

Jürgen Fischer

10:54 PM Revision dd26778f (qgis): Added jenkins run script

Tim Sutton

05:56 PM Revision c21973ff (qgis): fixed horizontal and vertical marker line fill using maximum markers in...

Radim Blazek

05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels

Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer

05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels

Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer

05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels

Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer

05:15 PM Bug report #8818: "value map" widget broken

Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... Alvaro Huarte

01:47 PM Bug report #8818: "value map" widget broken

Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... Alvaro Huarte

07:38 AM Bug report #8818: "value map" widget broken

Matthias Kuhn wrote:
> I don't know, if this PR really fixes the described problem. If I am not mistaken, this proble... Giovanni Manghi

07:33 AM Bug report #8818 (Feedback): "value map" widget broken

Matthias Kuhn

07:33 AM Bug report #8818: "value map" widget broken

I don't know, if this PR really fixes the described problem. If I am not mistaken, this problem is related to the val... Matthias Kuhn

04:34 PM Revision 79b74157 (qgis): Merge pull request #1110 from mwa/dev_labeling_from_sld

Read labeling from SLD Marco Hugentobler

04:24 PM Revision 95c3c6ff (qgis): removed color/width from line pattern fill symbol layer widget, fixes p...

Radim Blazek

04:08 PM Revision ef001fdc (qgis): read labeling from SLD

Mathias Walker

04:00 PM Bug report #9421 (Closed): Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

Fixed in changeset commit:"eaf5725f569fab62a67a51c0b0bddbb6a44797a2". Jürgen Fischer

03:00 PM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

Note that this is a regression. Version 1.8.0 works fine, showing a single entry with the correct SRID (0) and the co... Sandro Santilli

01:51 PM Bug report #9421 (Closed): Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)

Multipolygon PostGIS tables with unknown srid (0) appear twice in the "Add PostGIS Layer" dialog, once with a SRID pr... Sandro Santilli

02:46 PM Revision 52229056 (qgis): Merge pull request #1108 from Oslandia/remove_dead_code_in_qgssinglesym...

remove dead code in qgssinglesymbolrendererv2 Jürgen Fischer

02:04 PM Revision 6ca57f9d (qgis): [TRANSUP] nb by James

Signed-off-by: Werner Macho <[email protected]> Werner Macho

12:33 PM Revision 3fd75ac4 (qgis): fix line pattern fill misalignements, fixes #8974

Radim Blazek

11:59 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)

The French Guiana RGFG95/UTM22N projection (EPSG:2972) is bad defined. This seems to be corrected under the dev versi... Julien LARSENEUR

10:40 AM Bug report #9419 (Closed): Jenks natural breaks has a bad interval

Running Jenks classification on results in the last interval with an erroneous upper bound value. See attached pic. D... Sophia Parafina

10:14 AM Revision c7141e04 (qgis): fix duplicate translation in several translation files

Jürgen Fischer

09:58 AM Revision 760529bd (qgis): fix build with internal spatialite (followup 0d2c564cf; fixes #9417)

Jürgen Fischer

09:53 AM Revision 6f15e59f (qgis): fix deleteVertex for POLYGON and MULTILINESTRING

Jürgen Fischer

09:34 AM Revision a30a9dd0 (qgis): Merge pull request #992 from fsdias/master

Fix Relative_distribution_(distance_covariate).rsx Victor Olaya

09:22 AM Revision c3f4befa (qgis): fix nightly build and cppcheck in qwtpolar-0.1 (followup 0d2c564c)

Jürgen Fischer

09:10 AM Revision 37efe919 (qgis): remove dead code in qgssinglesymbolrendererv2

Vincent Mora

08:57 AM Revision 569e571a (qgis): [TRANSUP] fr by JRM, gl by Xan and pl by Robert

Signed-off-by: Werner Macho <[email protected]> Werner Macho

08:39 AM Revision 169b580f (qgis): Merge pull request #1103 from Jean-Roc/traduction_ui

update french translation Werner Macho

08:38 AM Revision 524788b9 (qgis): Merge pull request #1107 from Cracert/i18n

[TRANSUP] pl Werner Macho

07:57 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master

In qgis master there are CRSs (at least the ones I'm used to use, from Portugal and Italy) that are now missing the t... Giovanni Manghi

07:08 AM Bug report #4417 (Feedback): editing widgets: "slider range" and "dial range" do not show any val...

What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... Giovanni Manghi

07:08 AM Bug report #4417 (Feedback): editing widgets: "slider range" and "dial range" do not show any val...

What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... Giovanni Manghi

07:04 AM Bug report #8487 (Feedback): manual CRS being overwritten by QGIS

Gavin Fleming wrote:
> bug appears to be fixed in 2.1.0 Master (though the new north-oriented CRS definitions Tim add... Giovanni Manghi

06:21 AM Bug report #9357: Lots of PostGIS connections with a standalone python script

An update.
I decided to take a look at the connections that were being sent to PostGIS while my script was running u... James Stott

06:11 AM Bug report #9413: Misalignment after raster clipping

Giovanni Manghi wrote:
> interesting, what others tools (if any) would benefit from this parameter?
Only gdalwarp us... Etienne Tourigny

05:40 AM Bug report #9413: Misalignment after raster clipping

Etienne Tourigny wrote:
> Probably needs an argument like -tap
interesting, what others tools (if any) would benefit... Giovanni Manghi

04:57 AM Bug report #9413: Misalignment after raster clipping

Probably needs an argument like -tap Etienne Tourigny

02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping

Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... Giovanni Manghi

02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping

Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... Giovanni Manghi

02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping

Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... Giovanni Manghi

02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping

Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... Giovanni Manghi

05:42 AM Bug report #9196: WMTS and CRS issue

WFS seems to be fine. Jonathan Moules

05:41 AM Bug report #9196: WMTS and CRS issue

Note: A similar thing also seems to happen with WMS. Rather than zoom to the bounding box of the layer (try "z_OS_Ras... Jonathan Moules

05:34 AM Feature request #8898: "Save vector layer as" - limit export

Thinking about it more, it needs to be able to allow multiple possible exports:
Selected / All
Visible / All
And an... Jonathan Moules

04:50 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version

> today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success... Giovanni Manghi

04:50 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version

> today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success... Giovanni Manghi

04:47 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Hello,
today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have su... Marisa Silva

02:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Marisa Silva wrote:
> Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in ad... Giovanni Manghi

04:48 AM Feature request #8868: Don't show provider specific layer data source string

Jonathan Moules wrote:
> I'd suggest therefore that it shouldn't be shown. Instead it should show the server name tha... Giovanni Manghi

04:40 AM Feature request #8868: Don't show provider specific layer data source string

I'd suggest therefore that it shouldn't be shown. Instead it should show the server name that has been connected to. ... Jonathan Moules

03:41 AM Feature request #8868: Don't show provider specific layer data source string

The information in the field is actually right - for all data providers it displays the internal resource identifier.... Saber Razmjooei

03:35 AM Feature request #8868: Don't show provider specific layer data source string

The WMS query shown is wrong on a number of levels:
1) It doesn't start with the URL, but ends with it as a paramete... Jonathan Moules

04:41 AM Revision d5ef0c5d (qgis): [TRANSUP] pl

Robert Szczepanek

03:40 AM Bug report #8974: line pattern fill: at specific distance between lines it shows an undesired (re...

Hopefully fixed, please test.
There were other skeletons in the closet like misalignement on offset, missing line m... Radim Blazek

03:35 AM Bug report #8974 (Closed): line pattern fill: at specific distance between lines it shows an unde...

Fixed in changeset commit:"3fd75ac403c65976d75930c575fc5a20eab4f10b". Radim Blazek

02:01 AM Revision a78a0035 (qgis): fix windows build (fixes #9416)

Jürgen Fischer

01:15 AM Bug report #9417 (Closed): 0d2c564 Breaks master

Fixed in changeset commit:"760529bd7fd1c63ae5cc93ab3fd9392a68e0fda2". Jürgen Fischer

2014-01-23

12:39 AM Bug report #9417 (Closed): 0d2c564 Breaks master

I am building with master (a30a9dd) and it fails when I use:
//MODIFIED property for variable: WITH_PYSPATIALITE
WIT... Tim Sutton

11:31 PM Bug report #9036: db manager's spatialite node gone in latest qgis master

Ok, so problem was indeed my very old osgeo4w setup executable. The spatialite node now works when installing qgis ma... Mathieu Pellerin - nIRV

09:16 PM Bug report #9036: db manager's spatialite node gone in latest qgis master

Alexander confirmed via IRC that on his machine, both the 32-bit and 64-bit osgeo4w qgis master packages do not exhib... Mathieu Pellerin - nIRV

10:10 PM Revision 2a1ef13d (qgis): german translation update

Jürgen Fischer

10:02 PM Revision c38fadba (qgis): fix mersenne-twister warnings

Jürgen Fischer

09:48 PM Revision 6bbd17c2 (qgis): QgsGeometry refactoring:

* rework wkb parsing using Qgs(Const)WkbPtr
* replaces pointer dereferencing with memcpy
* should work on platform ... Jürgen Fischer

09:37 PM Revision cb5c4e99 (qgis): add QgsDistanceArea tests and enhance QgsGeometry tests a bit

(in preparation for a QgsGeometry wkb update) Jürgen Fischer

09:37 PM Revision 0d2c564c (qgis): implement more cppcheck suggestions

Jürgen Fischer

09:37 PM Revision 37df7923 (qgis): fix source path stripping in debug messages

Jürgen Fischer

09:37 PM Revision 68011dd2 (qgis): fix QGis::featureType output

Jürgen Fischer

09:34 PM Revision 94027df2 (qgis): Merge pull request #1091 from 3nids/uioptionbase2

dialog base: separator and dialog title as argument to init/restore Larry Shaffer

05:27 PM Bug report #9416: Problem compiling QGIS in visual studio

Thanks Jürgen! Alvaro Huarte

05:02 PM Bug report #9416 (Closed): Problem compiling QGIS in visual studio

Fixed in changeset commit:"a78a0035ac397c72cdbf878f69eb0060bd4fed66". Jürgen Fischer

03:38 PM Bug report #9416: Problem compiling QGIS in visual studio

May be 'QScopedPointer::swap' ( http://qt-project.org/doc/qt-5.0/qtcore/qscopedpointer.html#swap ) ?
Alvaro Huarte

03:28 PM Bug report #9416 (Closed): Problem compiling QGIS in visual studio

I can not build QGIS in visual studio when this commit is applied: commit:e8205c98c938b60569c30d5c0bbec3acab1f441a
t... Alvaro Huarte

04:34 PM Revision db7cddfc (qgis): Dxf export: fix copy paste bug

Marco Hugentobler

04:12 PM Revision b0861958 (qgis): Add qgstransectsample.sip

Marco Hugentobler

04:12 PM Revision f351c4f7 (qgis): [FEATURE:] Add point sample class to analysis library

Marco Hugentobler

04:12 PM Revision 5a193df4 (qgis): [FEATURE]: class for random transect sampling in analysis lib

Marco Hugentobler

04:05 PM Revision f4fc1340 (qgis): Merge pull request #1102 from ahuarte47/Issue_8725R-ST_Simplify2

Fix bug #8725R: no check simplification topology for point geometries in postgis provider Tim Sutton

02:24 PM Revision 0536cfa3 (qgis): Merge pull request #1105 from mwa/fix_expression_from_ogc_filter

Fix empty expression when reading from OGC filter Marco Hugentobler

02:09 PM Revision 31c93333 (qgis): fix empty expression when reading from OGC filter

Mathias Walker

01:12 PM Revision 6cd0fa16 (qgis): create the CRS project properties during the project creation

Leyan Ouyang

01:03 PM Revision eae4c2e1 (qgis): group CRS project property updates in the same place

Leyan Ouyang

12:45 PM Revision c9b85b0c (qgis): update ProjectCrs property in the project file

Leyan Ouyang

11:28 AM Revision 393071f2 (qgis): update fr ui

correct typos Jean-Roc Morreale

11:25 AM Revision b0474d6f (qgis): #8725R: no check simplification topology for point geometries

Alvaro Huarte

11:11 AM Revision bbd13f27 (qgis): Merge pull request #10 from mdouchin/traduction_mdouchin

French translation update Jean-Roc Morreale

09:48 AM Revision 810773a6 (qgis): cleanup 3568fe7

Jürgen Fischer

09:28 AM Revision eb929991 (qgis): Merge pull request #1083 from Oslandia/fix_max_on_joined_fields

fix bug in max value on joined fields Jürgen Fischer

09:12 AM Revision 3568fe76 (qgis): Merge pull request #1075 from Oslandia/expressions_in_symbol_rotation_a...

[FEATURE] allow for expressions in symbol rotation and scale Martin Dobias

08:38 AM Bug report #8068: Wrong font display in qgis server

Hi,
can we expect this issue to be fixed in version 2.2? It would really be appreciated. We havn't upgraded our produ... Karl-Magnus Jonsson

08:24 AM Revision 467f9783 (qgis): Merge pull request #1101 from Cracert/i18n

[TRANSUP] pl: Globe, expr.editor Werner Macho

07:58 AM Revision 8b530012 (qgis): Merge pull request #1099 from ahuarte47/Issue_8725R-ST_simplify

Fix bug #8725R: fix collapsed geometries by ST_simplify function of postgis Tim Sutton

06:51 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... Radim Blazek

06:51 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... Radim Blazek

06:47 AM Revision 7fca30b7 (qgis): [TRANSUP] pl: Globe, expr.editor

Robert Szczepanek

05:32 AM Bug report #9415 (Closed): Problem with current Debian build

In debian rules file, section: install: build
perl -i -pe 's=#!/usr/bin/env python=#!/usr/bin/python2.7=;' $(find de... Andy Wood

05:25 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in administrator account an... Marisa Silva

05:22 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Marisa Silva wrote:
> Sorry, where can I view that information?
> I've already performed uninstall and install again,... Giovanni Manghi

05:19 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Sorry, where can I view that information?
I've already performed uninstall and install again, also installed in anoth... Marisa Silva

05:11 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Have a look at your installation logs.
Might be that the installation was broken before the CRS synchronization at t... Andre Joost

03:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... Marisa Silva

03:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... Marisa Silva

05:05 AM Bug report #9414 (Closed): Custom CRS with units=mm stored as units=m

I try to set up a custom CRS with
@+proj=tmerc +lat_0=51.4 +lon_0=7.0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0... Andre Joost

04:36 AM Bug report #9397: Project's CRS is not written properly in the project's file

I updated the CRS properties management in this pull request, this should solve the issue: https://github.com/qgis/QG... Leyan Ouyang

02:41 AM Revision 49a807ab (qgis): fix build with GDAL <=1.9

Jürgen Fischer

02:11 AM Bug report #9413 (Closed): Misalignment after raster clipping

After clipping of a raster with a vector mask layer using the "gdalwarp -q -cutline" function, the clipped raster sho... Pascal Fust

2014-01-22

12:17 AM Feature request #9412: add a "minimum characters to wrap" option to labels

An alternative to this (maybe more intuitive) would be to implement a wordwrap() function in the expression builder:
... Mathieu Pellerin - nIRV

11:38 PM Feature request #9412 (Closed): add a "minimum characters to wrap" option to labels

It would be really useful for label's multiple lines formatting to be able to set a minimum number of characters for ... Mathieu Pellerin - nIRV

08:55 PM Revision 9aa4155e (qgis): [composer] Paste in place should put items in page which cursor is over...

Nyall Dawson

07:36 PM Revision fbdf34c2 (qgis): warn user when trying to add sqlite connection to browser and a connect...

Etienne Tourigny

07:20 PM Feature request #9411 (Closed): qgis composer item X, Y position values should be relative to page

Right now, the X and Y position value of an item is a value that reflects the absolute position within the qgis compo... Mathieu Pellerin - nIRV

06:48 PM Revision 2baf4030 (qgis): #8725R: fix invalid LineStrings

Alvaro Huarte

05:54 PM Revision d5ea0b08 (qgis): French translation update

Michael Douchin

02:20 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Hi Andreas
Thank you so much for the reply. The problem happens with or without spatial index. Tested both situation... Rhenriques Henriques

12:35 PM Bug report #9348: Selection of thousands of points very slow in QGIS2

Does the point shapefile have a spatial index. Can you share the data so we can test the issue? Andreas Neumann

01:25 PM Revision 5d020209 (qgis): Merge pull request #1100 from jonnyforestGIS/master

[TRANSUP] pt_PT Werner Macho

01:20 PM Revision 5c1fed5b (qgis): Add saving of recent expressions. Fix #6091

Nathan Woodrow

01:18 PM Revision 4077084f (qgis): [TRANSUP] pt_PT

adding some translations João Gaspar

01:18 PM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...

There is that. But maybe the tool in the Raster Menu was designed that way because of some use case?
Anyway, it's im... Filipe Dias

01:14 PM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...

Filipe Dias wrote:
> Giovanni Manghi wrote:
> > The different stats are explained because all the pixels that have 0 ... Giovanni Manghi

01:09 PM Bug report #9400 (Reopened): "Clip raster by mask layer" produces different results than "Clipper...

Giovanni Manghi wrote:
> The different stats are explained because all the pixels that have 0 value are evidently cou... Filipe Dias

12:52 PM Bug report #9400 (Closed): "Clip raster by mask layer" produces different results than "Clipper" ...

The different stats are explained because all the pixels that have 0 value are evidently counted in the stats (that d... Giovanni Manghi

03:05 AM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...

SAGA 2.10/"Clip grid with polygon" produced a raster with the same statistics as the output from "clip raster with ma... Filipe Dias

02:57 AM Bug report #9400 (Closed): "Clip raster by mask layer" produces different results than "Clipper" ...

I tried clipping a raster with "Clipper" from the Raster Menu and "Clip with mask layer" from the Processing Toolbox ... Filipe Dias

12:52 PM Revision f6f0384c (qgis): #87525R: refactoring and minor changes

Alvaro Huarte

12:52 PM Revision 01a733ba (qgis): #8725R: fix collapsed polygons by ST_simplify in postgis

Alvaro Huarte

12:49 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master

Assuming that you are using the column "Average.Depth" to create the categorized symbology, then the "." in the colum... Giovanni Manghi

12:36 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master

Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... Simon Dedman

12:36 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master

Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... Simon Dedman

12:29 PM Bug report #9394 (Feedback): Non-'Single Symbol' styles hide the layer in Master

I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac... Giovanni Manghi

12:29 PM Bug report #9394 (Feedback): Non-'Single Symbol' styles hide the layer in Master

I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac... Giovanni Manghi

12:45 PM Bug report #9408: Layer disappears when zoomed in past 'layer extent'

If you have evidence that qgis creates bad indexes or that corrupts them, then please file a new ticket. Giovanni Manghi

12:43 PM Bug report #9408 (Closed): Layer disappears when zoomed in past 'layer extent'

Source of problem: my meddling with the shapefile had caused a ".qix" file to be created. Overwriting the spoiled fil... Simon Dedman

10:58 AM Bug report #9408 (Feedback): Layer disappears when zoomed in past 'layer extent'

I would be happy to test the data: giovanni DOT manghi AT faunalia DOT pt Giovanni Manghi

09:00 AM Bug report #9408 (Closed): Layer disappears when zoomed in past 'layer extent'

Hi all.
I have a problem with a vector shapefile sent to me from the British Oceanography Data Centre (so I assume ... Simon Dedman

12:28 PM Bug report #8615: Python error on startup (Windows 64-bit)

Thanks Jurgen, will do. Simon Dedman

12:09 PM Bug report #8615: Python error on startup (Windows 64-bit)

Simon Dedman wrote:
> Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.
>
> [...]... Jürgen Fischer

11:42 AM Bug report #8615: Python error on startup (Windows 64-bit)

Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.... Simon Dedman

12:00 PM Revision 12a463d2 (qgis): Merge pull request #1087 from ahuarte47/Issue_9360R

Fix bug #9360-revival: fix whole layer not rendered (when simplify geometry activated; followup 3305a6c; fixes #9360) Jürgen Fischer

12:00 PM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...

If you use the full file path as key, this is what gets stored in the settings, and this does NOT work.
connections\... Etienne Tourigny

11:43 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...

Changing the way connection are stored in settings requires some thinking, in order to not break things.
Perhaps an... Etienne Tourigny

11:03 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...

Hi ! Thanks for quick reaction !!
Actually, I sometimes need specifically to have two spatialite databases with the ... Olivier Dalang

10:39 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...

Added warning in commit fbdf34c2b26e90f7c6e077eb54be53cae03d100f - and previous connection is preserved.
Setting thi... Etienne Tourigny

10:01 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...

It seems to me this is by design and would be hard to change. sqlite connections are stored in QGIS2.conf like this,... Etienne Tourigny

03:41 AM Bug report #9404 (Closed): Browser can only connect to one spatialite file of several files shari...

Hi !
If you have two spatialite files with the same name but in different folders, you can only connect to one using... Olivier Dalang

11:55 AM Bug report #9244 (Closed): Paste in place doesn't work across pages anymore

Fixed in changeset commit:"9aa4155e36c01e4fb5f851faa44a05c8764c4279". Nyall Dawson

03:47 AM Bug report #9244: Paste in place doesn't work across pages anymore

Steps to reproduce (tested in 06b1fbc):
1) create a new file
2) create a new composer
3) set number of pages to 2
4)... Olivier Dalang

11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached

Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi

11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached

Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi

11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached

Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi

11:14 AM Revision f2d0100d (qgis): Merge pull request #1094 from ahuarte47/Issue_8725R-maxscale

Feature #8725R: support for maximum scale at which the layer should be simplified Tim Sutton

11:13 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version

Hi Marisa
As Giovanni, I'm not having any issues with any portuguese CRS with the same version under Windows or MacO... Rhenriques Henriques

10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version

Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... Giovanni Manghi

10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version

Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... Giovanni Manghi

10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version

Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... Giovanni Manghi

10:39 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version

Hello,
I've installed QGIS Dufour 2.0.1 (in a windows 7 professional at 64 bit) with: "QGIS-OSGeo4W-2.0.1-3-Setup-x86... Marisa Silva

11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts

Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi

11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts

Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi

11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts

Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi

11:06 AM Feature request #3249 (Closed): SVG marker selection by user

Giovanni Manghi

11:05 AM Bug report #8975 (Reopened): line pattern fill: the style is applied to symbol border and not to ...

Giovanni Manghi

09:55 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels

Hi Nyall, if you are testing a postgis layer, then these error comes from a bug in ST_Simplify function of postgis ( ... Alvaro Huarte

03:43 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels

Hi Nyall, the pull #1087 was merged, can you test your issue please ?
Alvaro Huarte

09:27 AM Revision 52d114fb (qgis): [composer] Use better cross hairs cursor

Nyall Dawson

08:44 AM Revision 754307a4 (qgis): Merge pull request #1097 from Cracert/i18n

[TRANSUP] pl: Composer, DXF, previous mistake (tnx Werner) Werner Macho

08:43 AM Revision e2b1e33a (qgis): [TRANSUP] nl by Richard

Signed-off-by: Werner Macho <[email protected]> Werner Macho

07:59 AM Revision 58d25efb (qgis): [composer] Don't default to showing grid when opening 2.0 projects

Nyall Dawson

07:57 AM Revision befe56ff (qgis): [composer] Switch to select tool after pasting items (fix #8958)

Nyall Dawson

07:56 AM Revision 2e4fbc21 (qgis): [composer] Always evaluate label expressions (fix #9342)

Nyall Dawson

05:26 AM Feature request #9406: Add option to remove duplicate labels

the option is much alike the one for lines, that allows not repeat the label of connected lines. In this case would a... Giovanni Manghi

04:28 AM Feature request #9406 (Closed): Add option to remove duplicate labels

It is sometimes useful to remove duplicate labels from the map. The remaining label can be placed over one of the fea... Giovanni Manghi

04:22 AM Feature request #6091 (Closed): Add a "recent used" expressions list in field calculator

Fixed in changeset commit:"5c1fed5b2eb0f6c4dc30e39abd12f11a750d5f32". Anonymous

04:01 AM Feature request #9405 (Closed): differentiate between built-in plugins and user plugins

Hi !
I find it unclear for the user that user-installed plugins and built-in plugins are not differentiated at all... Olivier Dalang

03:38 AM Feature request #9403 (Open): Listing "project's databases" in DBManager and in Browser

Hi !
Currently, to open a database in DBManager, you must first create a connection to it in the Browser.
Why not a... Olivier Dalang

03:24 AM Feature request #9402 (Closed): Make the new Field Calculator tool available in the Modeler

It would be great to able to use the excellent new Field Calculator tool in the Modeler. At the moment only the old F... Filipe Dias

03:01 AM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...

Fixed in changeset commit:"12a463d2b06d5f10b94d4143c86465d8c4b0ecad". Jürgen Fischer

02:48 AM Feature request #9399 (Closed): Print Composer / Atlas generation - scale settings

Let the Atlas generator respect scale settings defined under "Project
properties" --> "General" --> "Project scales" ... Bo Victor Thomsen

01:54 AM Revision d61e6da4 (qgis): [TRANSUP] pl: Composer, DXF, previous mistake (tnx Werner)

Robert Szczepanek

01:08 AM Bug report #9356 (Feedback): Atlas print does nto respect composition page size, orientation

Tim,
How are you exporting the composition? Are you using the built-in pdf export option or printing to a pdf driver... Nyall Dawson

2014-01-21

12:55 AM Bug report #8705: Duplication of Composer should inherit custom paper size

Larry,
How'd you go with your fix for the other settings? Do you have a public branch I can test? Nyall Dawson

12:51 AM Feature request #9398 (Closed): map overview in composer with different coordinate systems

In the map composer, if the overview and the principal map use 2 different coordinate systems, the overview rectangle... julie -

12:51 AM Bug report #9244 (Feedback): Paste in place doesn't work across pages anymore

I can't replicate this... are you able to re-test and give me steps to reproduce it? Thanks! Nyall Dawson

11:42 PM Bug report #9342 (Closed): composer regression - expressions in text items are not evaluated

Fixed in changeset commit:"2e4fbc21a62129e62b0702f9e87f5dd86809c710". Nyall Dawson

11:42 PM Bug report #8958 (Closed): when pasting composer item(s) move / resize tool should automatically ...

Fixed in changeset commit:"befe56ff1be31dd1ef522de5d514a393394a951a". Nyall Dawson

08:55 PM Revision 58403d3d (qgis): Merge pull request #1095 from Cracert/i18n

[TRANSUP] pl: Atlas, Composer Werner Macho

07:20 PM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

IMO, this needs to be re-opened as follow-up clean ups are needed:
1/ *Saved symbols that relies on line pattern fil... Mathieu Pellerin - nIRV

04:34 PM Bug report #9397 (Closed): Project's CRS is not written properly in the project's file

Hi !
The project's CRS seems to be written in two places in a QGIS file : in the <properties>/<SpatialRefSys> block ... Olivier Dalang

01:00 PM Bug report #9393: impossible to select "regular" font style for labels

Borys Jurgiel wrote:
> Is it the default font in Ubuntu? If so I'd set the bug priority to High.
>
Yes - it's the d... Nyall Dawson

04:19 AM Bug report #9393: impossible to select "regular" font style for labels

Is it the default font in Ubuntu? If so I'd set the bug priority to High.
Btw. The same problem with DejaVu Sans on ... Borys Jurgiel

03:25 AM Bug report #9393: impossible to select "regular" font style for labels

I confirm problem on my system too. Mathieu Pellerin - nIRV

02:47 AM Bug report #9393 (Closed): impossible to select "regular" font style for labels

Here's a strange one... Using Ubuntu, it's impossible to select the "Regular" variant of the "Ubuntu" font in label p... Nyall Dawson

12:57 PM Revision 1cd307c9 (qgis): Merge branch 'master' of github.com:qgis/QGIS

Paolo Cavallini

12:57 PM Revision 061dccee (qgis): First update of IT GUI translation

Paolo Cavallini

12:43 PM Revision 03d1e2b5 (qgis): [composer] Use crosshairs cursor when drawing new items

Nyall Dawson

12:11 PM Bug report #8615: Python error on startup (Windows 64-bit)

Just received the same error on a QGIS 2.0.1 64-bit install on Win8.1 Eric Compas

11:18 AM Revision f79dfa15 (qgis): #9360R: enable ogr simplification for GDAL-OGR >= 1.11

Alvaro Huarte

11:07 AM Revision 7f32985c (qgis): [TRANSUP] es by carlos

Signed-off-by: Werner Macho <[email protected]> Werner Macho

10:11 AM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks

Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
Rhenriques Henriques

10:11 AM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks

Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
Rhenriques Henriques

09:21 AM Bug report #9396 (Closed): deactivate the Select datum transformations dialog by default

I'd classify the current behavior as a serious usability issue. Here is why:
* Most users are happy with the defaul... Anita Graser

09:18 AM Revision a5b0e045 (qgis): Consider scale based visibility in dxf export. Const correctness for ma...

Marco Hugentobler

07:23 AM Bug report #9395 (Closed): WFS layers time out, even though the timeout is not reached

Whenever I open existing projects containing WFS layers, I often get errors like this in the log, and the layer is ma... Jacob Madsen

05:58 AM Revision 7d2bf150 (qgis): [FEATURE] Add option for simple line symbols to be drawn only inside a

polygon. Allows for creation of "national geographic" style borders on
maps where a thick border does not overlap int... Nyall Dawson

05:50 AM Feature request #9373: Support for UDP connections in GPS Widget

--------- THIS MESSAGE IS OLD AND SORT OF NONSENSE AND YOU CAN SKIP IT TO THE NEXT ONE -----------
Well, this is wha... jtornero -

05:21 AM Feature request #3249: SVG marker selection by user

Well, AFAIK it works already... should it be closed?
Best regards jtornero -

05:06 AM Bug report #8426 (Closed): Transparency mangles WMS layers

This can be closed. Appears to be working now (master). Jonathan Moules

04:17 AM Bug report #3975: PDF exports on OSX always convert text to outlines

See:
https://github.com/qgis/QGIS/pull/1096 Vincent Mora

03:55 AM Revision 6d663c5f (qgis): Ensure binaries run through install_name_tool are user-writable during ...

Larry Shaffer

03:46 AM Revision ebae9471 (qgis): [TRANSUP] pl: Atlas, Composer

Robert Szczepanek

03:45 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project

Good morning,
in attached you'll find a zip with the project, a shp layer and the html file used in the map composer... Mathieu Bossaert

02:48 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project

Can you please share a project which is showing this behaviour? Nyall Dawson

02:58 AM Bug report #9394 (Closed): Non-'Single Symbol' styles hide the layer in Master

Hi all,
I've just posted this problem on gis.stackexchange "here":https://gis.stackexchange.com/questions/83522/grad... Simon Dedman

02:12 AM Revision 031596c4 (qgis): #8725R: define simplifyDrawingCanbeApplied better

Alvaro Huarte

01:45 AM Bug report #9392 (Closed): Ortho Projection produces artifacts

I`m trying to create a sphere-like view using qgis and the "world from space"-projection http://spatialreference.org/... achim tack

01:39 AM Revision 653af3a4 (qgis): #8725R: add maximum scale at which the layer should be simplified

Alvaro Huarte

2014-01-20

12:44 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project

Good morning Giovanni,
I still have the problem with last nightly version form osgeo4w (00c8196) Mathieu Bossaert

01:47 PM Bug report #9374 (Feedback): Print Composer - html frame stays empty when re-opening the project

Can you test QGIS master and report back? Thanks! Giovanni Manghi

12:29 AM Bug report #8975 (Closed): line pattern fill: the style is applied to symbol border and not to li...

Paolo Cavallini

12:16 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

IMHO the problem will be apparent with any device: the discontinuity between adjacent tiles will always be visible un... Paolo Cavallini

12:12 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Yes the border problem seem resolved.
>The problem is, that current implementation is based on tiles (QgsImageFillSy... aperi2007 -

12:05 AM Bug report #9388 (Closed): rpad doesn't work

Nathan Woodrow

11:52 PM Bug report #9388: rpad doesn't work

Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t... Tobias Schneider

11:52 PM Bug report #9388: rpad doesn't work

Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t... Tobias Schneider

11:36 PM Bug report #9388: rpad doesn't work

Nathan Woodrow wrote:
> What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
>
> This is my output in ... Tobias Schneider

02:57 PM Bug report #9388: rpad doesn't work

What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
This is my output in 2.0: @001 100@ and in master... Nathan Woodrow

09:22 AM Bug report #9388: rpad doesn't work

Also posted this here previously: http://gis.stackexchange.com/questions/83338/how-to-format-labels-with-leading-zeroes Tobias Schneider

09:18 AM Bug report #9388 (Closed): rpad doesn't work

When I try to use the "rpad" function to label point features, it doesn't add any padding symbols. The function "lpad... Tobias Schneider

10:59 PM Revision 00c8196b (qgis): Merge pull request #1093 from ahuarte47/Issue_8725R-UIpoints

Feature #8725R: hide simplification rendering tab for point layers Tim Sutton

10:25 PM Revision b440367f (qgis): #8725R: remove rendering panel for points layer

Alvaro Huarte

09:50 PM Bug report #9391 (Closed): Implement human readable listings for WMT-S titleset styles

Within the "Style" column of the Tileset table on the add WMTS layer dialog, ensure that the WMTS get capabilities l... Jeremy Palmer

03:41 PM Revision 7cb79c49 (qgis): debian packaging update

Jürgen Fischer

02:48 PM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks

Today's QGIS NB crashes before open under MacOSX Mavericks.
Cheers Rhenriques Henriques

02:28 PM Bug report #9378: QGIS crash when editing WFS layers with overlaps

Appears frequently on the 32-bit Windows version, no matter if the Windows OS itself is 32- or 64-bit Jacob Madsen

02:25 PM Bug report #9378 (Feedback): QGIS crash when editing WFS layers with overlaps

does not happem on qgis master 64bit/linux.
Does happen on master/Windows? Giovanni Manghi

03:45 AM Bug report #9378 (Closed): QGIS crash when editing WFS layers with overlaps

Please open the attached project file with QGIS 2.0.1 32-bit in Windows. Login is:
Username: vejlby
Password: testjy... Jacob Madsen

02:03 PM Bug report #9376: QGIS crash on sorting attribute columns on WFS layers.

Confirmed on Linux 64bit/master... Giovanni Manghi

02:03 PM Bug report #9376: QGIS crash on sorting attribute columns on WFS layers.

Confirmed on Linux 64bit/master... Giovanni Manghi

03:28 AM Bug report #9376 (Closed): QGIS crash on sorting attribute columns on WFS layers.

Steps to reproduce:
Open attached project file in QGIS 2.0.1 32- or 64-bit. Login with
Username vejlby
Password tes... Jacob Madsen

02:00 PM Bug report #9369 (Feedback): "duplicate layer" takes ages to duplicate spatialite layers

I'm not able to replicate, it would be possible to attach sample data/project? Giovanni Manghi

02:00 PM Bug report #9369 (Feedback): "duplicate layer" takes ages to duplicate spatialite layers

I'm not able to replicate, it would be possible to attach sample data/project? Giovanni Manghi

01:54 PM Bug report #7472 (Closed): vector editing errors

Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post... Giovanni Manghi

01:54 PM Bug report #7472 (Closed): vector editing errors

Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post... Giovanni Manghi

01:45 PM Bug report #8818: "value map" widget broken

Matthias Kuhn wrote:
> Giovanni, any progress on this?
Hi Matthias,
these days I'm not able (lack of time, sleep de... Giovanni Manghi

03:11 AM Bug report #8818: "value map" widget broken

Giovanni, any progress on this? Matthias Kuhn

01:40 PM Revision c22c0d99 (qgis): feature action: fix crash at launch

Denis Rouzaud

01:34 PM Feature request #9385 (Closed): Print composer - Construction Lines

Giovanni Manghi

12:58 PM Feature request #9385: Print composer - Construction Lines

Nyall Dawson wrote:
> This is already possible - you can drag a line from the ruler to add a snap line at any positio... Nicholas Duggan

12:08 PM Feature request #9385 (Feedback): Print composer - Construction Lines

This is already possible - you can drag a line from the ruler to add a snap line at any position on the page. Is that... Nyall Dawson

06:24 AM Feature request #9385 (Closed): Print composer - Construction Lines

The print composer could really do with a way to align all the map features, this is done in many software (CAD, ArcG... Nicholas Duggan

01:33 PM Feature request #9380 (Closed): Print composer grid options - No option for grid colour change

Giovanni Manghi

01:02 PM Feature request #9380: Print composer grid options - No option for grid colour change

Agreed, please remove Nicholas Duggan

12:12 PM Feature request #9380 (Feedback): Print composer grid options - No option for grid colour change

This is currently possible - click the "Line Style" button in the grid properties. Nyall Dawson

05:09 AM Feature request #9380 (Closed): Print composer grid options - No option for grid colour change

Within the QGIS 2.0.1 print composer, there are options to have either a line or cross graticule grid on the map fram... Nicholas Duggan

01:33 PM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame

Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap... Giovanni Manghi

01:33 PM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame

Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap... Giovanni Manghi

01:07 PM Bug report #9383: Print Composer - Map Frame contents does not fill frame

Hi Nyall,
So far with the vector data I've tried, I haven't seen any issue, it would appear it is predominantly the ... Nicholas Duggan

12:09 PM Bug report #9383 (Feedback): Print Composer - Map Frame contents does not fill frame

Hmm... looks like you are using the OpenLayers plugin in your map, is this correct? Can you please confirm whether yo... Nyall Dawson

05:59 AM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame

Contents of map frame doesn't fully fill frame (see attached image).
This works on the same PC (Windows 8.1) within 1... Nicholas Duggan

01:30 PM Revision 9f3e8f48 (qgis): wms provider: also include SCALE parameter for UMN mapserver (followup ...

Jürgen Fischer

12:45 PM Revision 0c99423b (qgis): #9360R: disable ogr simplification while OGR_G_SetPoints does not exist

Alvaro Huarte

12:04 PM Bug report #9389 (Closed): Identify Feature - not possible to scroll horizontally

I have the problem, that in the "Identify Feature" window, I can't scroll to the right side at a large row.
QGIS: 2.... Antoine Guerin

11:47 AM Revision d4b1bb47 (qgis): Reintroduce geometry caching while rendering (used esp. for snapping)

Martin Dobias

11:35 AM Revision 85a17c24 (qgis): Add QgsMapLayerAction and QgsMapLayerActionRegistry, which can be

used as a generic api for registering actions which can apply to
a specific map layer or layer type.
Create a QgsMap... Nyall Dawson

11:32 AM Revision fc3094ff (qgis): [TRANSUP] no by james and dk by Jacob

Signed-off-by: Werner Macho <[email protected]> Werner Macho

11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...

I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer

11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...

I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer

11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...

I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer

09:23 AM Revision f9c5ee0c (qgis): dialog base: separator and dialog title as argument to init/restore

Denis Rouzaud

08:55 AM Revision 4bfba09b (qgis): Server adjustments (allow usage from build dir, new API)

Martin Dobias

08:40 AM Revision e1442e23 (qgis): Merge pull request #1090 from Cracert/i18n

[TRANSUP] pl Werner Macho

08:20 AM Bug report #9386 (Closed): [processing] v.sample fails when creating intermediate table

cleaning unnecessary fields does the trick. Closing the issue, this is totally a grass's one. Regis Haubourg

08:15 AM Bug report #9386: [processing] v.sample fails when creating intermediate table

Error occurs in GRASS native GUI... May be a OSGEO4W trouble? Regis Haubourg

08:12 AM Bug report #9386: [processing] v.sample fails when creating intermediate table

Well, I tested in grass plugin, and same error. Processing is not to be blamed though..
Not sure I must move to gra... Regis Haubourg

06:35 AM Bug report #9386 (Closed): [processing] v.sample fails when creating intermediate table

Hi, v.sample fails when creating temp table of sampling points.
It seemed to wrok in processing version of december ... Regis Haubourg

07:07 AM Bug report #3975: PDF exports on OSX always convert text to outlines

I'm interested in adding export non-vectorized text as an option to the svg export.
Larry:is it the way to go ?
Vincent Mora

06:43 AM Feature request #9387 (Closed): Print Composer - Coordinate system as expression

The addition of dynamic text through expressions in QGIS 2 is awesome! Unfortunately I still need to fill out the coo... Nicholas Duggan

05:17 AM Feature request #9381 (Closed): Print composer: add option for point grid

Within the current QGIS Print Composer, there are only the options to use a line grid or cross grid symbol. I believe... Nicholas Duggan

04:36 AM Bug report #9379 (Closed): QGIS crash when opening certain WFS projects

Attached file was created on QGIS 2.0.1 64-bit. When it's opened in QGIS 2.0.1 32-bit, QGIS crashes with a minidump a... Jacob Madsen

04:34 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels

Hi Nyall, are you using current master ? I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52... Alvaro Huarte

03:12 AM Bug report #9375 (Closed): Simplification causes GEOS exceptions when layer has labels

I'm running into an issue with the new rendering simplification option. With this enabled on a layer which has labels... Nyall Dawson

03:40 AM Bug report #9377 (Closed): WMS getfeatureinfo result dialog not rendered ok and disappears

Both in current testing and 2.0.1 (here on Debian), I have troubles with the WMS getfeatureinfo output.
It defaults ... Richard Duivenvoorde

02:55 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> I think we should close it when the polygon layer not rendered issue is fixed (which... Alvaro Huarte

02:52 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

I think we should close it when the polygon layer not rendered issue is fixed (which occurs when simplify geometry is... Mathieu Pellerin - nIRV

02:39 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> Alvaro, @nirvn is me :)
Argggggggg, sorry, I have not noticed.
Then Can I close thi... Alvaro Huarte

02:37 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro, @nirvn is me :) Mathieu Pellerin - nIRV

02:27 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Mathieu, @nirvn commented that layers disappears in the extreme zoomed out scales even with simplification disable... Alvaro Huarte

02:45 AM Revision 5162889c (qgis): [TRANSUP] pl

Robert Szczepanek

02:40 AM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields

As soon as you install the updated OGR on your machine, QGIS will make use of it, even if you still run QGIS 2.0. The... Matthias Kuhn

02:31 AM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields

@Matthias: The OGR side seems to be fixed. Can you have a look at our own code? Or do you know whom to ask? Will QGIS... Anita Graser

02:25 AM Feature request #9373: Support for UDP connections in GPS Widget

Hello,
What kind of specs should be needed (ports, hosts...?
AFAIK It depends a lot on the R/V, but basically the m... jtornero -

02:03 AM Feature request #9373: Support for UDP connections in GPS Widget

Could you include pointers to any specs please? Jürgen Fischer

2014-01-19

12:40 AM Bug report #9374 (Closed): Print Composer - html frame stays empty when re-opening the project

Good morning to everyone,
I am facing a little problem with html frame in the map composer.
It is very helpful and p... Mathieu Bossaert

12:19 AM Revision 9209ef6e (qgis): [Plugin Manager] Fix ui layout

Borys Jurgiel

12:17 AM Revision 377d30aa (qgis): [Plugin Manager] Fix window title issues after recent changes in QgsOpt...

Borys Jurgiel

12:12 AM Feature request #9373 (Open): Support for UDP connections in GPS Widget

Sometimes NMEA data (not only GPS but sounders, etc) data is feeded through UDP datagrams. This is common, for insta... jtornero -

11:56 PM Feature request #9372 (Closed): More uniform CRS selector

CRS slector is different in many dialogs. See e.g. Save as... dialogs for raster and for vectors.
The raster solution... Paolo Cavallini

04:39 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Mathieu Pellerin - nIRV wrote:
> Alvaro, the first project attached to this issue works much, much better with your ... Alvaro Huarte

02:13 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Giovanni, thanks, I know it, I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52ff49c8e35... Alvaro Huarte

02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... Giovanni Manghi

02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... Giovanni Manghi

02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... Giovanni Manghi

02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... Giovanni Manghi

02:50 PM Bug report #9371 (Closed): Paste Features as New Vector Layer/New Memory Vector layer fails with ...

The new "Paste Features As" doesn't correctly handle PostGIS layers with a bigint columns. Attempting to paste featur... Nyall Dawson

02:23 PM Revision 6c14b503 (qgis): #9360R: enable ogr simplification on provider side only cpp

Alvaro Huarte

12:07 PM Bug report #9370 (Closed): QGIS guesses wrong CRS when units are us-feet

Full discussion under http://osgeo-org.1560.x6.nabble.com/gdal-dev-gdalinfo-coordinates-problem-td5098718.html
Sampl... Andre Joost

11:36 AM Bug report #7735 (Reopened): QgsProject.writeEntry bugs with line endings

Hi ! It seems the bug reappeared (or never really disappeared ?!!).
It affects the "save query" feature of the DB ma... Olivier Dalang

11:23 AM Bug report #7039: Use message bar for handling bad layers

I very much agree !
The fact that layers which are currently unavailable are deleted upon opening a project is a big... Olivier Dalang

11:09 AM Revision a2b8efaa (qgis): #9360R: mix CPP/C code - experimental

Alvaro Huarte

10:50 AM Revision 72ec87de (qgis): add myself to translators, russian translation update

Alexander Bruy

10:08 AM Revision 0c1f5c57 (qgis): Merge pull request #1088 from Cracert/i18n

[TRANSUP] pl: simple update Werner Macho

09:46 AM Bug report #9369 (Closed): "duplicate layer" takes ages to duplicate spatialite layers

Hi !
When duplicating spatialite layers using the "Duplicate layer" command from the contextual menu, it takes somet... Olivier Dalang

06:28 AM Bug report #7472 (Reopened): vector editing errors

Hi all, apologies for reopening if this isn't the best way of raising this.
I've just posted this problem on gis.sta... Simon Dedman

02:08 AM Revision 1eaefaa0 (qgis): [TRANSUP] pl: simple update

Robert Szczepanek

02:01 AM Revision b7ee396e (qgis): #9360R: remove ogr_geometry.h

Alvaro Huarte

01:15 AM Revision 2e819346 (qgis): #9360R: fix bad ogr simplification

Alvaro Huarte

2014-01-18

12:46 AM Bug report #7368: QGIS writing out incorrect .prj file

Confirm such behavior on latest master. dr -

11:22 PM Revision 06b1fbcb (qgis): german translation update

Jürgen Fischer

11:07 PM Revision 5377ad34 (qgis): debian packaging update

Jürgen Fischer

11:05 PM Revision a9d8bd1e (qgis): update sip some bindings

Jürgen Fischer

09:41 PM Revision 3327cdc9 (qgis): fix typos, indentation and some warnings

Jürgen Fischer

07:40 PM Revision 1a5332ab (qgis): Merge pull request #1082 from 3nids/uioptionbase

UI: dialog base: add current category to dialog title if in icon only mode Larry Shaffer

04:35 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Mathieu,
I have released a new pull request that I hope to be merged soon.
https://github.com/qgis/QGIS/pull/1087... Alvaro Huarte

04:48 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...

Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil... Mathieu Pellerin - nIRV

04:48 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...

Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil... Mathieu Pellerin - nIRV

03:04 PM Feature request #9368 (Closed): Print Composer Map Label and Texture Rotation

Currently, when map rotation is specified in the print composer, everything on the map is rotated, including labels a... Matthew Petroff

11:43 AM Feature request #9366: Allow scale values < 1 in composer map items

Petras Jokubauskas wrote:
> **Should I assign myself to this issue?
No, I'll tackle it after feature freeze. Should... Nyall Dawson

03:35 AM Feature request #9366: Allow scale values < 1 in composer map items

It is possible to crash Qgis using Print composer in state as it is now, so at first it is bug report.
However it is... Petras Jokubauskas

03:01 AM Feature request #9366 (Open): Allow scale values < 1 in composer map items

Giovanni Manghi

01:27 AM Feature request #9366 (Feedback): Allow scale values < 1 in composer map items

Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts? Giovanni Manghi

01:27 AM Feature request #9366 (Feedback): Allow scale values < 1 in composer map items

Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts? Giovanni Manghi

04:10 AM Feature request #9367 (Closed): allow setting smaller scale bar in composer Scalebar items

hello,
this is connected a bit with #9366, but this post is just about scalebar alone.
At this moment, thanks to rest... Petras Jokubauskas

03:58 AM Revision bf814c20 (qgis): indentation update

Jürgen Fischer

03:46 AM Revision ea486879 (qgis): fix warnings

Jürgen Fischer

03:46 AM Revision 3305a6c7 (qgis): ogr geometry simplifier:

- stick to C API
- enable simplification only with GDAL >=1.9 Jürgen Fischer

03:37 AM Revision c3a21743 (qgis): debian packaging update: reenable globe plugin on debian unstable

Jürgen Fischer

02:09 AM Bug report #9267 (Rejected): Plus button for Default datum transformations doesn't work

Works in master Alexander Bruy

02:09 AM Bug report #9267 (Rejected): Plus button for Default datum transformations doesn't work

Works in master Alexander Bruy

02:05 AM Bug report #4819 (Reopened): "Identify Features" tool is slow with complex/big features (lot of n...

Jürgen Fischer

01:32 AM Bug report #4819: "Identify Features" tool is slow with complex/big features (lot of nodes)

see also http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030315.html Giovanni Manghi

2014-01-17

12:36 AM Feature request #9366: Allow scale values < 1 in composer map items

why does it made citation? Petras Jokubauskas

12:32 AM Feature request #9366 (Closed): Allow scale values < 1 in composer map items

Hello everybody,
this is my first post, sorry if it is too big,
I am geologist/ petrologist and use QGIS not only for... Petras Jokubauskas

10:41 PM Revision 174577b9 (qgis): Fix FindQScintilla module for non-standard install locations

Larry Shaffer

06:00 PM Revision c2a8ad0a (qgis): wms-c: don't crash if tile matrix set isn't available anymore (fixes #9...

Jürgen Fischer

05:50 PM Revision 8f8ea0e1 (qgis): use line pattern fill symbol layer line symbol for fill instead of for ...

Radim Blazek

05:38 PM Revision 71e09ec3 (qgis): Use new unit conversion function to calculate dxf line width

Marco Hugentobler

05:02 PM Revision cc195a63 (qgis): german translation update

Jürgen Fischer

04:35 PM Revision 6926bc92 (qgis): Dxf export: fix order in multiline labels

Marco Hugentobler

04:35 PM Revision 4b60d098 (qgis): Fix dxf label size calculation

Marco Hugentobler

04:34 PM Revision 82acf769 (qgis): Set text color and show label boxes for debugging

Marco Hugentobler

04:34 PM Revision 78bd89d0 (qgis): Split multiline labels for dxf export

Marco Hugentobler

04:34 PM Revision a7a942ce (qgis): Export labels to dxf

Marco Hugentobler

04:29 PM Revision fb180388 (qgis): Merge pull request #1056 from ahuarte47/Issue_9060_B

[Feature]: Centralize conversion units in one unique function Marco Hugentobler

03:51 PM Revision 8c9f41cf (qgis): Merge pull request #1086 from ahuarte47/Issue_9360

fix bug whole layer not rendered (when simplify geometry activated; fixes #9360) Jürgen Fischer

02:57 PM Revision cc13f9d0 (qgis): #9360: fix bug simplification when transform is activated

Alvaro Huarte

02:12 PM Revision 71360c3c (qgis): [TRANSUP] Prepare ts files for new Release

Werner Macho

02:09 PM Revision 7ca60b30 (qgis): followup f33c4904d3b: add Q_DECL_DEPRECATED and sip annotation to hasCr...

Jürgen Fischer

01:01 PM Revision db18d835 (qgis): Oracle provider: added featureSource() support

Martin Dobias

12:48 PM Revision 5315cff1 (qgis): Allow Qt to search for Qt plugins (e.g. sqldrivers) in our plugin direc...

Without this it is necessary to explicitly provide QT_PLUGIN_PATH environment
variable for Qt plugins we build (e.g. ... Martin Dobias

12:01 PM Revision d8b55a2a (qgis): Merge pull request #1085 from tomass/master

Lithuanian translation update Werner Macho

10:29 AM Revision 2e9d3a8c (qgis): CRS axis inversion retrieval update:

- back to OGRGetAxis() as OSREPSGTreatsAsNorthingEasting() was introduced with
GDAL 1.10 (fixes builds with earlier... Jürgen Fischer

09:08 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

Partially fixed in commit:8f8ea0e, the line symbol layer is now used for fill, outline is not drawn (like with point ... Radim Blazek

09:00 AM Bug report #9361 (Closed): 2.1 core dump on loading 1.9 project

Fixed in changeset commit:"c2a8ad0a35894418d98ccc44b02f3b8e8f89de86". Jürgen Fischer

03:05 AM Bug report #9361: 2.1 core dump on loading 1.9 project

here's the project file Gavin Fleming

08:27 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

> I also see the layer-not-rendered issue with polygon layer too. Is the patch covering this case too?
Hi Mathieu, ... Alvaro Huarte

06:51 AM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...

Fixed in changeset commit:"8c9f41cfa1e6e8cc6625a3436756e3b29754142c". Jürgen Fischer

06:40 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Alvaro, that was fast :)
I don't have a build environment ready to test patch :/ can certainly verify when its comm... Mathieu Pellerin - nIRV

06:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro Alvaro Huarte

06:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro Alvaro Huarte

01:20 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)

Note: the regression was spotted on a linux (Ubuntu 13.10) machine, not tested on windows yet. Mathieu Pellerin - nIRV

07:48 AM Revision b7612f27 (qgis): UI: dialog base: add current category to dialog title

Denis Rouzaud

07:35 AM Revision f4315d7f (qgis): Lithuanian translation update

Tomas

05:05 AM Feature request #9362: Export PDF layers from QGIS map composers

To note that QGIS "can" already export (from the canvas, not the composer) as geopdf: the format is supported in gdal... Giovanni Manghi

03:48 AM Bug report #9060: Area is wrong in QGIS master (again)

Hi, I release a new pull request (https://github.com/qgis/QGIS/pull/1071) it attempts to correct this error.
Can you... Alvaro Huarte

03:26 AM Bug report #9365: QGIS save as SLD style for graduated styled layer different from what it's show...

Please consider this pic as IMAGE 2 - Geoserver Output Saved SLD stefano nardone

03:22 AM Bug report #9365 (Closed): QGIS save as SLD style for graduated styled layer different from what ...

I've found that when applying a graduated style to a layer in QGIS, if I save the style as SLD to use it in my Geoser... stefano nardone

02:33 AM Feature request #9352: update 7 parameter transformation fir Israel ITM grid

This should be reported to the Proj4 bug tracker, because QGIS takes all CRS from there.
Proj4 only uses valid EPSG ... Andre Joost

01:22 AM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper

Alvaro Huarte wrote:
> Hi Bernt, this patch was merged to master.
> Next release will contain it!
>
> Best Regards
>... Bernt Rane

2014-01-16

12:51 AM Feature request #9364 (Open): Provide a UI for creating custom Projection

I often have to work with data, which is my Country's statutory projection. This is a custom LCC Projection, which do... Devdatta Tengshe

12:42 AM Feature request #9363 (Open): Buffer tool should provide a way of using Units other than data sou...

Often I have data in Geographic Lat-long and want to buffer them to 1km or something similar.
The current way to do... Devdatta Tengshe

12:38 AM Feature request #9362: Export PDF layers from QGIS map composers

Feels the same as #8771 speaks about geopdf but it would be more safe to call it as geospatial pdf because GeoPDF is ... Jukka Rahkonen

12:25 AM Feature request #9362 (Open): Export PDF layers from QGIS map composers

As in the attached image.
PDF layers are formally known as Optional Content Groups.
"They represent a collection o... Asier Sarasua

12:15 AM Bug report #9361: 2.1 core dump on loading 1.9 project

Can you share the 1.9 project file? Jürgen Fischer

10:04 PM Bug report #9361 (Closed): 2.1 core dump on loading 1.9 project

QGIS 2.1 nightly build crashed on loading a 1.9 project file. So I starting it as root and it now showed a bad WMS la... Gavin Fleming

08:38 PM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...

A very serious regression has made its way into QGIS master following the (2nd) simplify geometry commits. Whole laye... Mathieu Pellerin - nIRV

07:08 PM Revision e8b8e3a4 (qgis): Merge pull request #1081 from ahuarte47/Issue_9345

Bug #9345: fix calculation of axis ordering of CRS Jürgen Fischer

06:28 PM Revision 2db44a59 (qgis): identified features highlight clip on zoom out fix

Radim Blazek

05:28 PM Revision f33c4904 (qgis): signal hasCrsTransformEnabled() renamed to hasCrsTransformEnabledChanged()

Radim Blazek

01:02 PM Revision 80b44a76 (qgis): fix bug in max value on joined fields

Vincent Mora

12:47 PM Bug report #9359 (Closed): The WCS client don't seem to refresh the cache

Using the client wcs from last trunk,
I notice that the client wcs with the option "always-cache" use a local cached ... aperi2007 -

11:51 AM Bug report #9345 (Closed): WMS axis ordering depending on CRS a 2.0 rollout stopper

Hi Bernt, this patch was merged to master.
Next release will contain it!
Best Regards
Alvaro Alvaro Huarte

11:01 AM Revision 119b7fd3 (qgis): WCS provider: use a download handler (like WMS)

Martin Dobias

10:30 AM Revision c7ccdc9e (qgis): fixed toSld() & replaced "" by QString

Vincent Mora

10:12 AM Bug report #9358 (Closed): Qgis 2.1 for Mac isn't able to save Project on a server share (Ubuntu ...

If I open a project located on a server share, Qgis creates immediately a new file in the project location with the s... Riccardo Casoli

08:59 AM Revision 07cbc22f (qgis): Resolved handling of WMS requests in worker threads

Martin Dobias

07:35 AM Revision 8b6d180b (qgis): Merge pull request #1079 from 3nids/uioptionbase

UI: remove top labels, use collapsible groupboxes, and other small improvements Denis Rouzaud

07:15 AM Revision 03a7125b (qgis): UI: remove top labels, use collapsible groupboxes, and other small impr...

Denis Rouzaud

06:19 AM Bug report #9357 (Closed): Lots of PostGIS connections with a standalone python script

I have a standalone python script that creates a bunch of PDFs for me.

Recently this script has developed an issu... James Stott

05:55 AM Bug report #9356 (Closed): Atlas print does nto respect composition page size, orientation

Hi
I've been testing the atlas updates here. One thing I got stuck with is that although I set the composition page ... Tim Sutton

05:15 AM Bug report #9355 (Closed): Export/add geometric column terribly slow

Even in the case of points (no complex calculations to do), it takes hours for half a million points (on a slow machi... Paolo Cavallini

04:53 AM Bug report #7209: WCS client seems broken

Giovanni Manghi wrote:
> yeah I know, this is why I wrote "apparently". Anyway now I tested also under Windows and ap... Radim Blazek

04:05 AM Bug report #7209: WCS client seems broken

Radim Blazek wrote:
> The last considerable change in WCS client was 3 months ago, so I have no idea how it got broke... Giovanni Manghi

04:20 AM Revision 5310040a (qgis): add header installation of simplify methods

Jürgen Fischer

03:07 AM Feature request #9326: Tolerance (snapping) during analyses

Probably this could be solved with a new command, allowing the user to arbitrarily reduce the precision of coordinate... Paolo Cavallini

02:12 AM Revision 2af29d18 (qgis): #9345: fix axis invert calculation

Alvaro Huarte

01:18 AM Feature request #9352 (Closed): update 7 parameter transformation fir Israel ITM grid

Please update +towgs84 parameter for the Israel ITM grid (EPSG:2039).
The 7 parameter transformation is officia... Michael Davis

2014-01-15

12:46 AM Feature request #9351 (Open): Load GPX: do not load empty layers

When loading a GPX, by default tracks, routes, and waypoints are loaded, even if empty. For the user it mey be diffic... Paolo Cavallini

12:40 AM Revision bf39737c (qgis): fixed bug in rotation & removed xml encode/decode

Vincent Mora

12:38 AM Bug report #7209: WCS client seems broken

"Always-cache" is also used for get capabilities, if the request failed the first time (during the server configurati... Radim Blazek

11:35 PM Bug report #7209: WCS client seems broken

Using the client wcs from last trunk,
I notice that the option "always-cache" don't seem work. It return always a mes... aperi2007 -

10:05 AM Bug report #7209: WCS client seems broken

The last considerable change in WCS client was 3 months ago, so I have no idea how it got broken and cured itself in ... Radim Blazek

05:58 AM Bug report #7209: WCS client seems broken

> I've really very difficulties to make crashing my QGIS (Linux - 0ca7316), please could you say to me what I should... Giovanni Manghi

05:54 AM Bug report #7209: WCS client seems broken

Paolo Cavallini wrote:
> In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly b... Giovanni Manghi

05:51 AM Bug report #7209: WCS client seems broken

Giovanni Manghi wrote:
> On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and... Salvatore Larosa

05:41 AM Bug report #7209: WCS client seems broken

In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly broken service will not be... Paolo Cavallini

12:12 AM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper

Alvaro Huarte wrote:
> Hi Bernt, I propose this pull request:
> https://github.com/qgis/QGIS/pull/1081
>
> Can you t... Bernt Rane

05:21 PM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper

Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro Alvaro Huarte

05:21 PM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper

Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro Alvaro Huarte

05:28 AM Bug report #9345 (Closed): WMS axis ordering depending on CRS a 2.0 rollout stopper

The move in wms 1.3.0 to a more strict axis ordering and a changed behaviour from qgis 1.8 to 2.0 is turning into a m... Bernt Rane

11:21 PM Bug report #9324 (Closed): Regression: Inference lines in composer no longer appear

Yes the lines that appear when you move an object around on the layout to show if they are aligned.
I tested on OSX ... Tim Sutton

10:44 PM Bug report #9349: QGis Zonal Statistics Plugin NoData included in Calculations

Why not adding a very small portion of the raster? Paolo Cavallini

11:42 AM Bug report #9349: QGis Zonal Statistics Plugin NoData included in Calculations

Could not upload the files due to size limitations Jason Tokayer

11:40 AM Bug report #9349 (Closed): QGis Zonal Statistics Plugin NoData included in Calculations

I have an ESRI raster file (w001001.adf) with a NoData value of -32768 and otherwise non-negative data. I have a vect... Jason Tokayer

10:12 PM Revision eb9ce3a3 (qgis): Fix warning

Nyall Dawson

06:53 PM Feature request #9339: Do not print setting for composer layer

At the moment I have a duplicate composer layout as a work around with the alignment image on. I delete the image use... James Harvey

06:51 PM Feature request #9339: Do not print setting for composer layer

Yes similar to that item, but not just labels. Would be for objects like images placed and items like lines and other... James Harvey

06:21 PM Revision 00efc467 (qgis): Set raster no data color back to 0,0,0,0 and overwrite that in raster d...

Radim Blazek

04:57 PM Revision e721e7f7 (qgis): Bugfixes for dxf export

Marco Hugentobler

01:54 PM Revision 0ca73163 (qgis): DB Manager: remove text under icons

Denis Rouzaud

11:45 AM Revision 48afac37 (qgis): followup 4502592: use QgsCollapsibleGroupBox

Denis Rouzaud

11:42 AM Bug report #9350 (Closed): reprojected postgresql layers are plotted with offset and very slow

Running QGIS master as of 2014-01-15, Postgis 2.1.1, osm2pgsql 0.85.0_20140107
Attached is a screenshot which displa... Thomas Baumann

11:41 AM Revision c53f8819 (qgis): Moved WMS capabilities, URI parsing out of provider class.

With this change, all WMS capabilities are kept within one class.
When the provider is cloned, the existing capabilit... Martin Dobias

11:31 AM Revision 9812804c (qgis): make icons more consistent in relation editor widget

Denis Rouzaud

11:17 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

The same applies to the editing of values in the attribute table. Rhenriques Henriques

10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Then tagging as a regression. Giovanni Manghi

10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Then tagging as a regression. Giovanni Manghi

10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Then tagging as a regression. Giovanni Manghi

10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2

Then tagging as a regression. Giovanni Manghi

10:51 AM Bug report #9348 (Closed): Selection of thousands of points very slow in QGIS2

The selection of thousands of points from a 5 million point shapefile takes ages to process and eventually crashes QG... Rhenriques Henriques

11:00 AM Revision e40a23a0 (qgis): #8725-R: add "Advanced settings" panel

Alvaro Huarte

11:00 AM Revision d439dfbc (qgis): #8725-R: include qgsvectorsimplifymethod.sip

Alvaro Huarte

11:00 AM Revision 2c67e511 (qgis): #8725-R: no simplify point layers in postgres provider

Alvaro Huarte

11:00 AM Revision 1e781ff8 (qgis): #8725-R: fix old API in other test cpp files

Alvaro Huarte

11:00 AM Revision 4cc82e62 (qgis): #8725-R: refactoring of simplification API in FeatureIterators

Alvaro Huarte

11:00 AM Revision 61041dac (qgis): #8725-R: simplify edited geometries in QgsVectorLayerFeatureIterator

Alvaro Huarte

11:00 AM Revision a7ff8ce3 (qgis): #8725-R: no check 0-pointers to delete

Alvaro Huarte

11:00 AM Revision 61c8cad6 (qgis): #8725-R: no check geometry pointer twice

Alvaro Huarte

11:00 AM Revision 7cb8ff7f (qgis): #8275-R: simplification on a per-iterator basis

Alvaro Huarte

11:00 AM Revision 22c0c794 (qgis): #8725-R: minor changes and UI update

+ add comment about 'prepareSimplification' in constructor
+ fix comment in 'providerCanSimplify'
+ improve UI messages Alvaro Huarte

11:00 AM Revision 8fb87f18 (qgis): #8725-R: minor changes

Alvaro Huarte

11:00 AM Revision 84fe6762 (qgis): Fix warnings

Matthias Kuhn

11:00 AM Revision 062c1e41 (qgis): #8725-R: fix old API in testqgsblendmodes.cpp

Alvaro Huarte

11:00 AM Revision 42fd6a2b (qgis): #8725-R: never simplifying the first two or last two vertices in a line

This ensure that the angles at the line start and end are the same after
simplification Alvaro Huarte

11:00 AM Revision f37b0562 (qgis): #8725-R: New vector provider capability for topological simplification

Alvaro Huarte

11:00 AM Revision 3b6ed3bf (qgis): #8725-R: PostgresProvider simplifies on provider side

PostgresFeatureIterator implements simplification on provider side Alvaro Huarte

11:00 AM Revision dcaf0b5a (qgis): #8725-R: OgrProvider simplifies on provider side

OgrFeatureIterator implements simplification on provider side Alvaro Huarte

11:00 AM Revision 23b6523f (qgis): #8725-R: FeatureIterator and other minor changes

Alvaro Huarte

11:00 AM Revision faebcce1 (qgis): #8725-R: move VectorSimplifyMethod to other file

Alvaro Huarte

11:00 AM Revision 0ec7d359 (qgis): #8725-R: FeatureIterator use SimplifyMethod

AbstractFeatureIterator use SimplifyMethod to simplify locally the
geometries fetched from data source (provider) Alvaro Huarte

11:00 AM Revision c2834024 (qgis): #8725-R: VectorLayer use SimplifyMethod

VectorLayer define QgsVectorSimplifyMethod to configure the new
QgsSimplifyMethod member of QgsFeatureRequest Alvaro Huarte

11:00 AM Revision 6358fde7 (qgis): #8725-R: define QgsSimplifyMethod

Define QgsSimplifyMethod to use as optional parameter in
QgsFeatureRequest Alvaro Huarte

11:00 AM Revision 08b5e305 (qgis): #8725-R: simplifier execute in rendering loop

Alvaro Huarte

11:00 AM Revision 0a970eb7 (qgis): #8725-R: define UseRenderingOptimization

Redefine RenderingPrintComposition to UseRenderingOptimization Alvaro Huarte

11:00 AM Revision 319acc2b (qgis): #8725-R: show map2pixel threshold in panels

Alvaro Huarte

10:49 AM Revision 10db5770 (qgis): credentials: give focus to password if a user is given

Denis Rouzaud

10:43 AM Revision 0d8875f6 (qgis): Merge pull request #1078 from 3nids/uiatlas

lighter UI for atlas composer Nyall Dawson

10:33 AM Revision 4502592b (qgis): UI: splitter for the query builder dialog

Denis Rouzaud

10:26 AM Revision 20acfc03 (qgis): remove outline of items in list widget when they have focus

Denis Rouzaud

09:52 AM Revision 11ca7fac (qgis): Merge pull request #1049 from lynxlynxlynx/master

Two build fixes for Arch Jürgen Fischer

09:40 AM Bug report #9320: Weird behavior when creating columns from a joined table

Confirmed on Linux with QGIS master commit:48afac3 Alexander Bruy

09:35 AM Bug report #7822: Export to Spatialite is really slow, compared to commandline ogr2ogr

Still cannot confirm. Export takes several seconds. Alexander Bruy

09:34 AM Bug report #9101: Raster artefact in composer pdf export

Summary:
* QGIS was working well, writing RGBA 0,0,0,0 for transparent pixels, but there is a bug in Acroba Reader s... Radim Blazek

09:23 AM Bug report #9101 (Closed): Raster artefact in composer pdf export

Fixed in changeset commit:"00efc467844fc710e12a4ab7a64b3fc76b133ad2". Radim Blazek

04:32 AM Bug report #9101: Raster artefact in composer pdf export

For raster artefacts on left / right border I have created new issue #9343. Radim Blazek

09:25 AM Bug report #9343 (Closed): Raster artefacts on data / no data border

Fixed in commit:00efc46784.
This bug was caused by first attempts to fix #9101. Radim Blazek

05:03 AM Bug report #9343: Raster artefacts on data / no data border

The artefacts have the same color as RGB part of QgsRasterRenderer::NODATA_COLOR = qRgba( 255, 255, 255, 0 ). It mean... Radim Blazek

04:22 AM Bug report #9343 (Closed): Raster artefacts on data / no data border

Artefacts appear within raster extent on the left/right side of no null data and on the left / right side of raster e... Radim Blazek

09:19 AM Revision 34809e1e (qgis): lighter UI for atlas composer

Denis Rouzaud

08:25 AM Revision 89a774a3 (qgis): add splitters to raster calc dialog, use QgsCollapsibleGroupBox to save...

Denis Rouzaud

08:05 AM Bug report #9317: OTB Band Math error with Processing (sextante) modeler

Apparently, this problem is only for the QGIS 2 version 64 bits... ken oz

08:01 AM Revision 5d4877a5 (qgis): fix warning

Denis Rouzaud

06:01 AM Feature request #9346 (Closed): DBManager allow to add non geographical queries to canvas

Hi,
FastSQLayer allowed adding non geographic query results in QGIS. This is very handy for join/relates, adding sta... Regis Haubourg

05:59 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter

Paolo Cavallini wrote:
> If this works in master, it can indeed be closed. Reopen if necessary.
it is not fixed, but... Giovanni Manghi

05:47 AM Bug report #8592 (Closed): Field Calculator: Nonsense values for $area and $perimeter

If this works in master, it can indeed be closed. Reopen if necessary. Paolo Cavallini

04:53 AM Feature request #9344 (Closed): Queries saving in DBManager

Wouldn't be nice to have the possibility to store the queries written in DBManager either in the project file OR in Q... didier peeters

03:20 AM Feature request #9340: Bordering polygons dash and dot outline not rendering systematically

Fair enough. It is possible to achieve that through conversion to lines and removing overlaps. I thought other softwa... Miroslav Umlauf

01:11 AM Feature request #9340: Bordering polygons dash and dot outline not rendering systematically

Your wish is understandable but I guess it is hard to fulfill. Polygons are separate shapes so at the common borders ... Jukka Rahkonen

02:56 AM Bug report #9342: composer regression - expressions in text items are not evaluated

Oh, just forgot, shouldn't we add some unit test to avoid such important regressions? Regis Haubourg

02:55 AM Bug report #9342: composer regression - expressions in text items are not evaluated

Ok!, BTW all you did in composer is just great in production use! Regis Haubourg

01:14 AM Bug report #9342: composer regression - expressions in text items are not evaluated

This was a consequence of the new atlas preview mode. I realise now I've forgotten to take into account the fact that... Nyall Dawson

02:25 AM Feature request #8261 (Resolved): Put focus on "password" field when adding a PostGIS table

solved #10db5770c4c159763f77c972b4ba4b82f02a4b20 Denis Rouzaud

2014-01-14

12:49 AM Bug report #9342 (Closed): composer regression - expressions in text items are not evaluated

Expressions in text items (like writting current date) are no more evaluated in composer. Expression builder do evalu... Regis Haubourg

12:43 AM Revision 4ba3e7c8 (qgis): Fix hue/saturation changes for rasters causing debug noise when raster ...

Nyall Dawson

12:39 AM Feature request #9065 (Closed): Support for nautical miles and more rational scalebars in composer

implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83 Jürgen Fischer

12:39 AM Feature request #9065 (Closed): Support for nautical miles and more rational scalebars in composer

implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83 Jürgen Fischer

07:30 PM Feature request #9065 (Resolved): Support for nautical miles and more rational scalebars in composer

Nyall Dawson

10:14 PM Revision bb9c9893 (qgis): Fixed bug in the processing toolbox qgis:intersection tool, preventing

attempts at writing the wrong geometry type to a shapefile. Joshua Arnott

09:54 PM Revision 73ddf5a9 (qgis): Lithuanian translation update

Tomas

08:58 PM Revision 47d253e0 (qgis): #9060: Enable degrees as valid DisplayUnit in QgsOptions dialog

Alvaro Huarte

08:58 PM Revision 2bffa19f (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsDecorationScaleBar

Alvaro Huarte

08:58 PM Revision 48cf5b32 (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsGrassGisLib

Alvaro Huarte

08:58 PM Revision 23f6a231 (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsComposerScaleBar

Alvaro Huarte

08:53 PM Revision c20f38b6 (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsDistanceArea

in Alvaro Huarte

08:53 PM Revision b662d1be (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsWmsProvider

in Alvaro Huarte

08:53 PM Revision 5d59d83d (qgis): #9060: use QGis::fromUnitToUnitFactor in QgsDxfExport

in Alvaro Huarte

08:53 PM Revision 65f43a8b (qgis): #9060: define global unit conversor

Alvaro Huarte

08:47 PM Bug report #9341 (Closed): Polygon outline offset

When using offset for polygon outline it creates overhang of outlines in starting (ending) node of polygon. Miroslav Umlauf

08:40 PM Feature request #9340 (Open): Bordering polygons dash and dot outline not rendering systematically

When there are adjacent (bordering) polygons with the same dashed/dotted outline in one layer it should be rendered a... Miroslav Umlauf

07:29 PM Feature request #9339: Do not print setting for composer layer

James - is this a duplicate of #4357? Does that match what you're after? Nyall Dawson

06:46 PM Feature request #9339: Do not print setting for composer layer

Have a look for a plugin called Layer Combinations. It will allow you to create combinations of layers which you can... Nathan Woodrow

06:41 PM Feature request #9339 (Closed): Do not print setting for composer layer

It would be good to have a tick box on each layout composer item for "Do not print" layer. Like setting some layers i... James Harvey

06:55 PM Revision e8205c98 (qgis): changed std::auto_ptr for QScopedPointer

Vincent Mora

06:23 PM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.

This is real useful because this is the only way in Qgis to save a geo-referenced image, more exactly to get a world ... baditaflorin -

06:16 PM Bug report #8273: Attributes not loaded from kml/kmz file

I can confirm the same bug with QGIS 2.0.1 on windows.
baditaflorin -

06:16 PM Bug report #8273: Attributes not loaded from kml/kmz file

I can confirm the same bug with QGIS 2.0.1 on windows.
baditaflorin -

05:25 PM Revision 7d404d97 (qgis): allow for expressions in symbol rotation and scale

the single, graduated and categorised symbol renderers have been
refactored to avoid use of raw pointers (auto_ptr ar... Vincent Mora

04:16 PM Revision a31ebb47 (qgis): fix warning

Denis Rouzaud

03:26 PM Revision 853d1ad7 (qgis): CODING

Small typo fix in coding doc Tim Sutton

03:20 PM Revision 1be2674a (qgis): Merge pull request #1073 from 3nids/expressiondialogsplitter

expression builder: add splitters and change buttons Denis Rouzaud

03:17 PM Revision 8edd6a49 (qgis): expression builder: add splitters and change buttons

respect HIG Denis Rouzaud

01:13 PM Revision 27f5b8d0 (qgis): Merge pull request #1072 from nyalldawson/atlas_multimap3

[FEATURE][composer] Allow for more than one atlas controlled map in comp... Nyall Dawson

12:52 PM Revision 6bb9dfec (qgis): [FEATURE][composer] Allow for more than one atlas controlled map in com...

Nyall Dawson

11:12 AM Revision 680ffe0a (qgis): Make insertVertex/moveVertex/deleteVertex work without cache

Martin Dobias

09:50 AM Revision 2cdc8965 (qgis): [TRANSUP] Arabic by Hosham, added new translator

Signed-off-by: Werner Macho <[email protected]> Werner Macho

06:40 AM Bug report #9335 (Closed): Widgets: impossible to input a time

In the field properties, it is possible to add a Calendar widget, selecting a date/time format. However, the widget o... Paolo Cavallini

06:38 AM Bug report #9334 (Closed): Value widget: set default step at 1

the current default for step in the range widget is 0, which seems inappropriate. Please set it at 1 Paolo Cavallini

04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)

duplicate of #9012 #8998 and probably more Giovanni Manghi

04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)

duplicate of #9012 #8998 and probably more Giovanni Manghi

04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)

duplicate of #9012 #8998 and probably more Giovanni Manghi

04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)

duplicate of #9012 #8998 and probably more Giovanni Manghi

02:20 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)

In the print composer, I make a wonderfull layout.
Then I try to export it (the format doesn't matter, the problem e... Sarah De Laet

04:13 AM Feature request #6484 (Closed): Atlas: support for multiple maps

Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f". Nyall Dawson

04:13 AM Feature request #9248 (Closed): Atlas - Using the same coverage layer multiple times in a sheet.

Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f". Nyall Dawson

02:47 AM Bug report #8437: db manager don't load esri personal geodb to postgis single feature instead of ...

The problem can be extended to all datasources containing multi and single objects. If faced it with a shape2postgis ... Regis Haubourg

2014-01-13

12:17 AM Feature request #9330 (Closed): Rotate Rendered Map Canvas

Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0.... Bjorn Nyberg

12:15 AM Bug report #9329 (Closed): Rotate Rendered Map Canvas

Bjorn Nyberg

12:12 AM Bug report #9329 (Closed): Rotate Rendered Map Canvas

Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0.... Bjorn Nyberg

11:10 PM Bug report #9328 (Closed): Path requires Return to be saved

When adding a custom path to a lib or external application, the path is not saved unless one press Return after havin... Paolo Cavallini

10:55 PM Feature request #9326: Tolerance (snapping) during analyses

See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html Paolo Cavallini

10:50 PM Feature request #9326 (Feedback): Tolerance (snapping) during analyses

In case of layers with essentially the same shapes, with different precision, the diff between these layers produces ... Paolo Cavallini

10:55 PM Feature request #9327: Add warning for topological errors

See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html Paolo Cavallini

10:53 PM Feature request #9327 (Closed): Add warning for topological errors

In case of layers with topological errors, analyses fail, and the user has no clue about the reasons.
I suggest to c... Paolo Cavallini

10:52 PM Revision 385bb598 (qgis): Simplified 173e1d7

Matthias Kuhn

10:28 PM Revision 173e1d72 (qgis): [attrtable] Force default selection color (regardless of window focus)

Fix #8205 Matthias Kuhn

10:28 PM Revision 6febfd22 (qgis): Fix warning

Matthias Kuhn

06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104

Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -

06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104

Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -

06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104

Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -

05:30 PM Revision 47d09fee (qgis): Fixed point displacement renderer (and made it faster)

Martin Dobias

01:57 PM Revision a273b69a (qgis): Further tweak to pull request docs.

Tim Sutton

01:29 PM Bug report #8205 (Closed): Selected rows in attribute table have wrong/too light background color

Fixed in changeset commit:"173e1d72a668fcf26366fc64052ed664fefe059b". Matthias Kuhn

04:58 AM Bug report #8205: Selected rows in attribute table have wrong/too light background color

Sorry - I don't have a dev environment on Windows. If you put it into master I could test it with the next nightly to... Andreas Neumann

04:26 AM Bug report #8205: Selected rows in attribute table have wrong/too light background color

Can a windows user give a try to https://github.com/qgis/QGIS/pull/1069
I was coding it pretty much in the dark Matthias Kuhn

03:56 AM Bug report #8205 (Reopened): Selected rows in attribute table have wrong/too light background color

Reopened due to demand on mailing list. Matthias Kuhn

03:56 AM Bug report #8205 (Reopened): Selected rows in attribute table have wrong/too light background color

Reopened due to demand on mailing list. Matthias Kuhn

12:50 PM Revision 78841d91 (qgis): delimitedtext: add support for featureSource()

Martin Dobias

12:40 PM Bug report #9324: Regression: Inference lines in composer no longer appear

Can you clarify this for me -- what exactly do you mean by inference lines? The snap lines?
Nyall Dawson

04:08 AM Bug report #9324 (Closed): Regression: Inference lines in composer no longer appear

In master ( e745b2f ) there seems to be a regression in composer. The inference lines that were shown when moving obj... Tim Sutton

12:38 PM Revision 88c73a13 (qgis): Added a little more debug info so show which projects were found and wh...

Tim Sutton

12:38 PM Revision e745b2ff (qgis): Added notes on merging pull requests based on Matthias's message in mai...

Tim Sutton

11:21 AM Revision e3d6236a (qgis): german translation update

Jürgen Fischer

10:50 AM Revision 6d3f1b8a (qgis): Fix issue with combination of edit buffer + vector join

Martin Dobias

09:45 AM Bug report #9259: SpatiaLite new column issue

done #9325 Maxim Dubinin

09:45 AM Bug report #9325 (Closed): Saving as Spatialite saves as SQLite that allows setting width of the ...

1. Load any shapefile with say 1 polygon
2. Right-click - save as Spatialite, check Add to canvas
3. After it is done... Maxim Dubinin

06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable

Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc

06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable

Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc

06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable

Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc

06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable

Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc

05:49 AM Revision 7397bd82 (qgis): delimitedtext: move methods specific to feature iterator from provider ...

Martin Dobias

03:59 AM Bug report #9323: QGIS Processing Options python error on windows8

Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error... Richard Duivenvoorde

03:59 AM Bug report #9323: QGIS Processing Options python error on windows8

Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error... Richard Duivenvoorde

03:42 AM Bug report #9323 (Closed): QGIS Processing Options python error on windows8

Hello, im a forestry student from Portugal, that started working now with a company and used ArcGIS and IDRISI as SIG... José Alves

02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor

I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... René-Luc ReLuc

02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor

I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... René-Luc ReLuc

02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor

I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... René-Luc ReLuc

02:20 AM Feature request #8682 (Closed): Add expressions to diagrams

Thank you very much, Stéphane Matthias Kuhn

2014-01-12

12:31 AM Feature request #8682: Add expressions to diagrams

This issue can be closed :-) Stéphane Brunner

08:56 PM Bug report #9036: db manager's spatialite node gone in latest qgis master

Alex, please re-open, the osgeo4w pyspatialite package _is_ installed (as stated in description). Mathieu Pellerin - nIRV

06:19 PM Revision a18b4a35 (qgis): highlight identified feature using real feature shape

Radim Blazek

05:48 PM Revision d59ab805 (qgis): avoid saving OGR layer to the very same OGR layer (fixes #9221)

Jürgen Fischer

04:48 PM Revision 134dc489 (qgis): fix warnings

Jürgen Fischer

11:52 AM Revision 9f786826 (qgis): Merge pull request #1046 from ahuarte47/Issue_9254

Bug #9254: fix point-style with "outline width" = 0 still show the outline Nyall Dawson

10:20 AM Revision 8990b66e (qgis): WMS server: even more performant png8 conversion

Marco Hugentobler

09:20 AM Revision f59f0777 (qgis): wms server: call getStyles from getStyle

Marco Hugentobler

09:04 AM Revision b6f9ddcf (qgis): GetStyles: changed layers list from mapLayerFromTypeName to mapLayerFom...

Alessandro Pasotti

08:58 AM Bug report #9157 (Closed): Offline editing tool is very slow when it creates the Spatialite local...

Giovanni Manghi

08:55 AM Revision d82a3991 (qgis): Fix #9314

Alessandro Pasotti

08:55 AM Bug report #9119 (Closed): srs.db not closed (with OTF reprojection)

Giovanni Manghi

08:53 AM Bug report #8993 (Closed): resizing the map object with "draw coordinates" option active does not...

I cannot replicate it anymore on master, I guess it has been fixed. Giovanni Manghi

08:53 AM Bug report #8993 (Closed): resizing the map object with "draw coordinates" option active does not...

I cannot replicate it anymore on master, I guess it has been fixed. Giovanni Manghi

08:49 AM Bug report #9221 (Closed): Overwriting shapefile removes all attribute data and features

Fixed in changeset commit:"d59ab8052287425b98bf7add107e789737ec4c7c". Jürgen Fischer

05:01 AM Bug report #9254 (Closed): Vector points style: "outline width" = 0 still show the outline

Matthias Kuhn

04:55 AM Bug report #9254: Vector points style: "outline width" = 0 still show the outline

Great work, thanks everybody :) Noone Noone

04:13 AM Bug report #9254 (Resolved): Vector points style: "outline width" = 0 still show the outline

The pull request was merged :-)
https://github.com/qgis/QGIS/pull/1046 Alvaro Huarte

03:48 AM Revision 0c6d9ef9 (qgis): [composer] Allow data defined symbol expressions using atlas feature pr...

Nyall Dawson

2014-01-11

12:21 AM Bug report #9314 (Closed): Wrong FILTER validation in WMS

Fixed in changeset commit:"d82a3991a9ebf6066c6b455bf0de04f129677baa". Alessandro Pasotti

12:04 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit

You have fixed the problem in OSGeo4W. So i assume the solution will also be available in the next standalone QGIS In... Holger Bischoping

12:50 PM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit

Holger Bischoping wrote:
> Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
> Thanks a lot
Huh? That's unchanged.
Jürgen Fischer

12:42 PM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit

Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
Thanks a lot
Holger Bischoping

10:39 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit

I suppose the 64bit installer. It's fixed in OSGeo4W now. Jürgen Fischer

10:03 AM Bug report #9322 (Feedback): Qwt5 cannot be imported by plugin on Windows 64bit

Giovanni Manghi

08:14 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit

Are you using the 64bit or the 32bit installer on Windows 64bit? Jürgen Fischer

07:42 AM Bug report #9322 (Closed): Qwt5 cannot be imported by plugin on Windows 64bit

h1. Context: QGIS - Standalone - Installer

QGIS-Version 2.0.1-Dufour QGIS-Codeversion d94c044
... Holger Bischoping

10:51 PM Revision 224e3401 (qgis): Merge pull request #1065 from tomass/master

Lithuanian translation update Werner Macho

10:38 PM Revision 4fbf244c (qgis): Lithuanian translation update

Tomas

03:02 PM Revision d04239d7 (qgis): [processing] small fix for non-ascii string (fixes #9175)

Salvatore Larosa

11:11 AM Bug report #9091: Field calculator toolbar item disabled in edit mode

Thanks Salvatore :) Noone Noone

06:26 AM Bug report #9091: Field calculator toolbar item disabled in edit mode

This should happen (in 2.0.1) only for point layer, with line and polygon layer should be working.
I had fixed this i... Salvatore Larosa

10:40 AM Revision 557cc6ff (qgis): GPX: added support for featureSource()

Martin Dobias

10:32 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows

OSGeo4W 32bit supports ECW (and MrSID). Jürgen Fischer

10:32 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows

OSGeo4W 32bit supports ECW (and MrSID). Jürgen Fischer

10:09 AM Bug report #8759 (Feedback): ECW support missing in 32bit QGIS on Windows

Giovanni Manghi

10:06 AM Bug report #8759: ECW support missing in 32bit QGIS on Windows

OSGeo4W 32bit supports ECW now, doesn't ? Salvatore Larosa

09:54 AM Bug report #8644 (Closed): Models with utf-8 description can't be executed

Fixed in commit:e4c60ad Salvatore Larosa

09:54 AM Bug report #8644 (Closed): Models with utf-8 description can't be executed

Fixed in commit:e4c60ad Salvatore Larosa

08:58 AM Revision 8d21cbf5 (qgis): GRASS provider updated to support featureSource()

Martin Dobias

06:17 AM Bug report #9141 (Closed): processing script editor window does not have close button on linux

Salvatore Larosa

06:13 AM Bug report #9162 (Feedback): Crash when typing something into python editor

I think this is not related to the console code, please could you try the latest master code ?
Also could you provide... Salvatore Larosa

06:09 AM Bug report #9175 (Closed): [processing] scripts with non ascii character can't be saved

Fixed in changeset commit:"d04239d70b2e2a00137d85ae4d1f46419388fab8". Salvatore Larosa

03:23 AM Bug report #9321 (Closed): Empty RULE parameter in GetLEgendGraphic returns all rules even if a r...

Given this rule fragment:... Alessandro Pasotti

2014-01-10

07:04 PM Revision 1bca3108 (qgis): [TRANSUP] norway by James

Signed-off-by: Werner Macho <[email protected]> Werner Macho

06:14 PM Revision b9c087ef (qgis): Fix vectorlayercache test

Matthias Kuhn

05:22 PM Revision f847a268 (qgis): Cleaner handling of dxf symbology and linestyles

Marco Hugentobler

04:43 PM Revision 1d3dd1bc (qgis): Add missing git ignore

Stéphane Brunner

04:43 PM Revision a0911d6b (qgis): [diagram] Add expression for diagram attributes and size

Stéphane Brunner

11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table

tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi

11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table

tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi

11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table

tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi

10:59 AM Bug report #9320 (Closed): Weird behavior when creating columns from a joined table

Steps to reproduce:
1- Join the layer named 'Joined_Table.csv' to the layer named 'BBS_Routes' using the shared rou... Guillaume Larocque

09:41 AM Bug report #9319 (Closed): copy of QgsExpression causes segfault

The default copy and assigment operator of QgsExpression causes segfault (multiple delete) if used.
Since the copy a... Vincent Mora

09:32 AM Bug report #9318 (Closed): Paste layer style is allowed on layers with different geometry types a...

QGIS allows user to copy\\paste a style where the origin layer style has different geometry type than the destination... Alexandre Neto

09:23 AM Revision 443a4165 (qgis): [BUG][QGIS-Server] Project Properties WCS Layers Row Count

I have forgotten to set the row count of the WCS Layers table in the
projetc properties. D'Hont René-Luc

09:03 AM Bug report #8818: "value map" widget broken

Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Giovanni Manghi wrote:
> > > weird, is still broke here, see attach... Alvaro Huarte

07:52 AM Bug report #8818: "value map" widget broken

Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > weird, is still broke here, see attached screencast.
>
> Hi Giovan... Giovanni Manghi

01:35 AM Bug report #8818: "value map" widget broken

Giovanni Manghi wrote:
> weird, is still broke here, see attached screencast.
Hi Giovanni, maybe I've missed somethi... Alvaro Huarte

08:53 AM Revision 27713b81 (qgis): [Processing] Headless scriptability little enhanced

D'Hont René-Luc

07:53 AM Feature request #6040: Dissolve should support multiple fields

Andrey Isakov wrote:
> +1 for this feature
meantime the SAGA dissolve in the processing toolbox allows to choose up ... Giovanni Manghi

02:39 AM Feature request #6040: Dissolve should support multiple fields

+1 for this feature Andrey Isakov

07:45 AM Bug report #9317 (Closed): OTB Band Math error with Processing (sextante) modeler

OTB Band Math used with the Processing modeler doesn't work. According to the log file (see below), it seems that the... ken oz

06:19 AM Bug report #8298 (In Progress): CRS change with recently used CRS makes no effect in the first ch...

René-Luc ReLuc

01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice

If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... René-Luc ReLuc

01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice

If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... René-Luc ReLuc

01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice

If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... René-Luc ReLuc

01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice

If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... René-Luc ReLuc

03:53 AM Bug report #9316 (Open): Topology errors detected by some checker, not from others

The attached shp has a number of topological errors. The fTools checker (under manu Vector>Gemoetry tools) detects 34... Paolo Cavallini

02:44 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master

Matthias Kuhn wrote:
> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a d... Andrey Isakov

2014-01-09

12:51 AM Revision ccde424d (qgis): reduce debugging noise in attribute table (fixes #9315)

Jürgen Fischer

11:57 PM Feature request #9287: Live linked layer styles

This would be a great feature!
I would add a possibility to link feature styles to styles in style manager.
Styles c... Lauri Kajan

10:29 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

I've noticed a similar latency recently, but in a release build (i.e. without debug output, so Jürgens commits should... Matthias Kuhn

03:52 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104

Fixed in changeset commit:"ccde424dc14ebc82c97e62d3568b1cf15f3bfda9". Jürgen Fischer

02:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

This only occurs when Attribute Table is open. joe larson

02:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104

This only occurs when Attribute Table is open. joe larson

02:20 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104

using OSGeo4W64, 2.1.0-104 while trying to update a field in a large dataset (~300MB) with the Field Calculator ...ve... joe larson

05:58 PM Revision 46a6224c (qgis): missing QgsDistanceArea.setSourceCrs() in SIP

Radim Blazek

02:32 PM Revision 63ba802e (qgis): Categorized renderer: fix memory leak

Matthias Kuhn

02:24 PM Revision 6175f241 (qgis): indentation

Denis Rouzaud

01:57 PM Revision 0a8c1ccd (qgis): Merge pull request #1059 from etiennesky/coloramps-inverted

add checkbox to invert color ramps in graduated and categorized symbology Etienne Tourigny

01:40 PM Revision 129bd987 (qgis): indentation update

Jürgen Fischer

10:07 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master

> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a database perspective ... Giovanni Manghi

09:09 AM Revision 1b029693 (qgis): Merge pull request #1058 from elpaso/master

GetStyles split from GetStyle Marco Hugentobler

08:56 AM Bug report #9307 (Feedback): QGIS 2.0 won't open on OSX 10.9

Giovanni Manghi

08:10 AM Bug report #9314: Wrong FILTER validation in WMS

Fixed in https://github.com/qgis/QGIS/pull/1062 Alessandro Pasotti

08:08 AM Bug report #9314 (Closed): Wrong FILTER validation in WMS

When filter contains strings with more than two words, it gets grouped but the individual elements in the token list ... Alessandro Pasotti

06:20 AM Revision a07ddd6c (qgis): GRASS raster: remove superfluous QProcess instances

Martin Dobias

05:45 AM Revision 1b7c7943 (qgis): WCS: quick and dirty way to get it working

Martin Dobias

05:45 AM Feature request #9303: Add a switch to reverse colours and invert palette

Not sure it is necessary. I'd put it besides the "invert colour" checkbox. Paolo Cavallini

05:17 AM Feature request #9303: Add a switch to reverse colours and invert palette

Added a few people to this ticket, would appreciate feddback on questions raised in last comment. Etienne Tourigny

05:14 AM Feature request #9303: Add a switch to reverse colours and invert palette

Actually, implementing "invert palette" shouldn't be too hard.
The question is, where should this option appear? In... Etienne Tourigny

05:01 AM Feature request #9303: Add a switch to reverse colours and invert palette

Added invert checkbox for vector layer classification (Categorized and Graduated) in 0a8c1ccd090f28efe2706e6f56d8ce28... Etienne Tourigny

05:36 AM Bug report #9312: Manually adjusting "Value" in a "Graduated" class doesn't update the "Label" co...

Additional condition: The label column should only be adjusted, when it is still unmodified. Matthias Kuhn

05:35 AM Bug report #9290: Join problems if filename contains dot

Confirmed here.
I have fixed an issue which masked the real issue and led to a memory leak in the categorized render... Matthias Kuhn

2014-01-08

12:10 AM Bug report #8727 (Closed): GetProjectSettings returns field name instead of alias for display field

Fixed in changeset commit:"1f9c378c77160f64612391e4e40824b853d59ddd". Alessandro Pasotti

06:33 PM Revision 1bf41063 (qgis): [pyqgis-console] fixes save as action in editor

Salvatore Larosa

06:33 PM Revision 83192988 (qgis): Fix about dialog (followup 740024c)

Salvatore Larosa

06:33 PM Revision 9b0652f0 (qgis): [pyqgis-console] APIs file update (pyqgis.pap)

Salvatore Larosa

05:54 PM Revision 868d50c7 (qgis): creatensis.pl: default arch to x86_64

Jürgen Fischer

09:46 AM Revision b4d7e02d (qgis): fix windows build (also syncs QgsComposition sip binding)

Jürgen Fischer

09:20 AM Bug report #9312 (Closed): Manually adjusting "Value" in a "Graduated" class doesn't update the "...

When I classify an integer or float field using graduated values and manually adjust the values, the label column doe... Donovan Cameron

08:51 AM Bug report #9311 (Closed): Creating a group layer reverses order of selected layers in new group

When selecting more than one layer in the layer list and creating a group from them, the order of the layers is rever... Donovan Cameron

07:44 AM Revision 4fd3b1fb (qgis): [composer] Add nautical miles support to scalebar, more rational defaul...

jtornero -

07:32 AM Bug report #9307: QGIS 2.0 won't open on OSX 10.9

Hi Jon
Go to http://www.kyngchaos.com/software/qgis , download the "requirements" and install.
When you install Mav... Rhenriques Henriques

05:59 AM Revision 926a6765 (qgis): Merge pull request #1060 from ahuarte47/Issue_9308

Bug #9308: fix impossible to remove a group in the legend Jürgen Fischer

05:49 AM Revision 3687ac11 (qgis): WFS: added featureSource() - now it is possible to do rendering

Martin Dobias

05:14 AM Revision eaf1f381 (qgis): Fix Mac build

Larry Shaffer

04:56 AM Revision ffb815b0 (qgis): WMS provider fixes for multi-threading

This is still far from working nicely or being finished:
- cloned provider does not get capabilities copied over, so ... Martin Dobias

03:33 AM Feature request #9094 (Closed): Del-key should delete feature

Alvaro Huarte

03:02 AM Bug report #9310 (Closed): Save dialogue for Geoprocessing outputs is inconsistent

The dialogue for saving a vector output using Windows 7 (64 and 32bit) is a different dialogue box from the save vect... Neil Benny

02:27 AM Bug report #2487: Memory data provider should not be saved

regis Haubourg wrote:
> It is easy to delete layers not needed, so I vote to keep persistent memory layers. But if on... Radim Blazek

01:17 AM Bug report #2487: Memory data provider should not be saved

+1 with Chris, Memory Layer Saver plugin is installed in default config here and IMHO should be ported to core.
It is... Regis Haubourg

01:15 AM Revision 46a6024b (qgis): Change to darker background for side bar. No Frame for list widget

Nathan Woodrow

2014-01-07

12:08 AM Revision 2155dd8c (qgis): #9308: enable remove groups in the legend

Alvaro Huarte