Activity
From 2014-01-09 to 2014-02-07
2014-02-07
-
07:52 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
- Alvaro, the builds I use on my three machines with which I can replicate all the time are builds offered via the qgis...
-
05:56 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
- Hi Mathieu, I successfully built QGIS master in Ubuntu 13.10 :-)
!Ubuntu1310_Issue9360.jpg!
I use VirtualBox in Wi... -
06:05 PM Bug report #9213: 'bad_alloc' error at QGIS start
- I've now reproduced the random std::bad_alloc at startup bug. I think it's unrelated to the
std::bad_alloc on low RA... -
04:58 PM Bug report #8735 (Feedback): Automatic red alignment lines stay visible
- Is this reproducible in current dev version? That code area has been changed significantly in 2.1 and I'm confident t...
-
- Is this actually a bug (ie string is untranslatable) or it's just missing in a particular translation?
-
01:47 PM Bug report #9490: Line labels sometimes placed on an endpoint rather than in the middle
- Try un-checking "Discourage labels from covering features" for the _lots_ layer, or for both layers. It is under Vect...
-
01:32 PM Bug report #9508: Dissolve tool doesn't work
- Have you tried to upgrade "Processing" from the plugin installer?
I just tested v.dissolve with a shapefile and it ... -
02:29 AM Bug report #9508 (Closed): Dissolve tool doesn't work
- There is a "vector map not found" error when i try to execute dissolve tool. It doesn't work with both temporary and ...
-
- I don't think this is a bug - to me it's a feature. Why would you want to disable anti-aliasing when exporting a comp...
-
- I looked into GRASS and SAGA and both have the same problem, which means that in the FOSS GIS world, batch conversion...
-
05:21 AM Feature request #9477: GDAL translate: support ESRI rasters folders names as inputs
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- There is no crash or data corruption, so I'm lowering the priority.
The issue is not in GDAL (that by the way would ... -
- This is a follow up of #9315
Open a fair large vector like http://idena.navarra.es/descargas/CARTO1_Lin_6CNivelD.zip... -
- Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... -
10:13 AM Bug report #8584 (Closed): WFS 1.0.0 Client requests with FILTER fails against Geoserver
- Fixed in changeset commit:"10c15089d1735cec491ee0958b54b3fb0fad230d".
-
- Fixed in changeset commit:"8b8eb562f499c70b7be2001f4aec82b304d4ccfa".
-
07:57 AM Bug report #9030: WMS passwords stored in plaintext even if not chosen to
- When did the change in behaviour occur?
And no, this is not a case where the WMS URL itself contains the password. T... -
06:09 AM Bug report #9030 (Closed): WMS passwords stored in plaintext even if not chosen to
- Um, not reproducable in master (but I'm not aware that there was a change in behaviour since 2.0.1)
If you enter the... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- When I convert a layer to offline project, the primary key is preserved and I can keep update attributes.
Maybe a sh... -
07:52 AM Bug report #9350 (Reopened): reprojected postgresql layers are plotted with offset and very slow
- Thank you for the feedback and sorry to reopen this bug.
It might well be that there are some parameters missing for... -
- without those parameters is normal that you get a shift.
-
- without those parameters is normal that you get a shift.
-
02:11 AM Bug report #9350: reprojected postgresql layers are plotted with offset and very slow
- I found the error: The definition of one of my CRSs was incomplete. The Proj4 string QGIS provided for EPSG:3003 was
... -
06:37 AM Bug report #8708: Links in About broken
- About menu/sponsorship:
we already do a redirect so the link
http://qgis.org/en/sponsorship/donors.html
points to
... -
05:35 AM Bug report #8708: Links in About broken
- Agreed is not crucial, but given that it takes so little to fix, and is so bad for our "marketing", why not fixing it...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback. Reopen of necessary.
-
- Works for me on linux (either case 1 and 2 work as expected)
-
- see also #5239
-
- should be duplicate of #8628
-
- works as expected in qgis 2.0.1
-
- works as expected in qgis 2.0.1
-
05:43 AM Bug report #8977: rulebased styling with a dash in the field name
- Giovanni Manghi wrote:
> There is no crash or data corruption, so I'm lowering the priority.
There is (configuration... -
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
Can you please test the latest master and report... -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority.
It is still true in the latest master? -
- There is no crash or data corruption, so I'm lowering the priority also because there are alternatives in the process...
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- closing for lack of feedback, should be fixed.
-
- closing for lack of feedback, should be fixed.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- There is no crash or data corruption, so I'm lowering the priority.
-
- Fixed in changeset commit:"5a64215bd2bd6239a868a60c3f5c26ded518c61b".
-
-
- see #8174
-
- Sandro Santilli wrote:
> Is this duplicate of #2921 ?
yes, closed that too. -
02:34 AM Bug report #8887: qgis don't use correctly the map-units in dimension of data-defined-properties ...
- Hi,
I understand the explanation of simply square root not always right to resize a symbol.
But, I guess perhaps th... -
- Yay, thanks.
-
02:09 AM Bug report #9501: QGIS crash on specifying filter for WFS layer.
- Just adding filter item &geometry from the builder menu made crash for me.
-
01:55 AM Bug report #9032: LINESTRINGM not displayed
- I can confirm the issue. On my machine the testing table (provided by Martin) doesn't work on latest master while wor...
-
- Salvatore Larosa wrote:
> works fine for me either 2.0.1 or master version.
>
> Please can you provide more info abo... -
- Fixed in changeset commit:"408e2b7a121e241ef859a95929245f13505d7442".
2014-02-06
-
- Fixed in changeset commit:"d0719b012f65fae1e715ff20626e658eb8452167".
-
12:30 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
- Is this duplicate of #2921 ?
-
- Fixed in changeset commit:"caf33b657f6c845779797c86e82fb5d71a28b6ee".
-
- Fixed in changeset commit:"f3166a5897340411738429b78bdb551f1ba28cae".
-
12:20 AM Bug report #9507 (Closed): QGIS crash when opening a HTML Map Tip with some mistakes
- I wrote a simple html code to display a Map Tip on a vector layer:...
-
12:18 AM Bug report #9501: QGIS crash on specifying filter for WFS layer.
- Indeed it should have been set to "Yes".
I overlooked the option when I made the issue - And now I seem to be unable ... -
- I confirm QGis crash with both queries. This ticket should have *"Causes crash or corruption"* set to "Yes", shouldn'...
-
- @intersects( $geometry, geomFromWKT( 'LINESTRING(709841 6187968,727061 6198617)')) causes a crash aswell@
-
- Running QGIS 2.0.1-Dufour desktop on windows XP 32bit
I'm connected to a WFS server (some topographical data in GML 2... -
11:52 PM Bug report #9506 (Closed): preview atlas hides the coverage in the main canvas
- In an atlas composer:
1. Check "Hidden coverage layer"
2. Enable atlas preview
=> the layer is hidden on the main c... -
- Martin Dobias wrote:
> This should have nothing to do with geometry simplification. This is mainly about having those... -
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
- This should have nothing to do with geometry simplification. This is mainly about having those "qApp->processEvents()...
-
-
- I still cannot confirm. Used this testing table and the line shows up in canvas:...
-
03:08 PM Bug report #9505 (Closed): qgis crash on TIN interpolation of curve line
- hi if i create a tin on shape of curve line with 3d elevation it crash if i try with TIN interpolation
-
- You can delete the toolbar.
-
- python iface has a method addToolBar, to add a toolbar with buttons.
But there is no way to remove the toolbar.
I've... -
- works fine for me either 2.0.1 or master version.
Please can you provide more info about the problem ?
maybe adding ... -
- Paolo Cavallini wrote:
> Please add a more descriptive title
i want to update the title with something like "wrong l... -
- Please add a more descriptive title
-
- When i make a query with the spatial query plugin (intersection between 2 layers), the selected features correspond t...
-
11:44 AM Bug report #9503 (Closed): Fill patterns are clipped when exporting rotated composer to PDF
- In my composer I have a map with only a polygon shapefile layer. The map is rotated to 290 degrees. The polygon lay...
-
09:03 AM Bug report #9502: Reshape Tool quits working
- Also in QGIS version 2.1.0....
-
- When editing a polygon, the Reshape tool works for a while, about 20 edits, the stops working on that shape. It will ...
-
05:58 AM Bug report #9485: Line Offset in symbology generates artifacts
- Hi,
I took note that a similar issue had already been opened.
Here is a snapshot with and without simplification an... -
05:22 AM Bug report #5520: Wrong boundingbox values in GetCapabilities for empty layers
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- I raised this bug in priority because it is annoying
underlying data change and a layer may become empty (no features... -
- ramon . wrote:
> Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at... -
02:54 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
- Still not sure if its the same bug, but tracks.zip file is giving this error on the mint terminal at home:
ERROR 1: ... -
02:13 AM Bug report #9499 (Closed): path to external-svg-folder or storage of svg
- I tried to assign QGIS the path to my svg (in german: Layereigenschaften - Stil - Symbollayertyp is set to SVG-Markie...
-
- Upstream bug report: https://bugreports.qt-project.org/browse/QTBUG-36675
2014-02-05
-
- Alvaro - you might have run into the issue I describe here : http://nyalldawson.net/2013/04/building-qgis-on-ubuntu-1...
-
- Jürgen Fischer wrote:
> Alvaro Huarte wrote:
> > I am going to request help to qgis dev mailing list.
>
> Try to bui... -
- ramon . wrote:
> A couple of extra bits:
> 1. Alvaro, if you have a 64-bit install the python library is somewhere od... -
- Alvaro Huarte wrote:
> I am going to request help to qgis dev mailing list.
Try to build "packages":http://htmlprevi... -
- A couple of extra bits:
1. Alvaro, if you have a 64-bit install the python library is somewhere odd. Something /usr/l... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the log window doesn't throw any error message.
>
> Yes, please, try on lin... -
12:22 AM Bug report #9462 (Closed): layer.getFeatures on return the first feature
- in version 2.0.1 vector providers do not allow multiples iterators
[[https://issues.qgis.org/projects/quantum-gis/re... -
- I also have a problem with the on-the-fly reprojection, using QGIS 2.0.1 on a Kubuntu 12.04 system. Find attached a s...
-
09:20 PM Bug report #9482: Composer exporting to eps add its own extension .EPS
- I have. File->Export as image-> and select EPS
-
- How are you exporting to EPS? I don't have any choice of EPS export from composer...
-
- Marking as blocker since it's a regression.
In 2.0, the user could do this:
- Empty layer title string, which would ... -
- The fix here appears to be simple: when a layer title type is set to hidden, the vertical spacing value above the (fi...
-
- A regression slipped into QGIS master with regards to composer legend item's vertical spacing of layers set to hidden...
-
04:43 PM Bug report #9497 (Closed): Hide the UUID from the composer items
- Hi !
Some time ago, we introduced UUID for composer items.
Those are useful for plugin since they allow to identify ... -
- Fixed in changeset commit:"22346cd3c7c4c670a26ae1e606f8b0a6d9a0a0a4".
-
02:57 PM Bug report #9460: gdaltools relies on gdalinfo for raster SRS and extent, should use python API
- Merged, thanks Etienne.
-
- Fixed in changeset commit:"58faa5b4ad113860e798f2b5fdeb0741bb864e09".
-
Memory usage doesn't really 'grow' to ~880 MiB; QGIS is simply unable to allocate if it doesn't have that much virt...-
- Yeah, PointOnSurface could be an alternative to centroid - it would be good to try it out and have a comparison!
-
07:17 AM Bug report #9356 (Closed): Atlas print does nto respect composition page size, orientation
- I was doing a print on an A1 layout for Jakarta using Atlas export as pdf option. I am pleased to say I just tested a...
-
06:20 AM Bug report #9032: LINESTRINGM not displayed
- Yes Martin, I used postgis LINESTRINGM data. In current Master, they are displayed correctly.
However, I had also MU... -
- I cannot replicate with a LINESTRINGM shapefile. Did you use a shapefile or PostGIS or something else? Please attach ...
-
04:19 AM Bug report #9496 (Closed): Warning: QPen::setDashPattern: Pattern not of even length
- In QGIS Master I open a QGIS 2.0 project and most of the layers do not draw. They render perfectly in QGIS 2.0 but no...
-
03:39 AM Bug report #8400 (Closed): crash opening layer properties of a freshly inserted wms layer
- Seems to be fixed now. (using 5192e8d)
I'll re-open if it happens again. -
03:23 AM Bug report #8857: sip: Unable to find file "QtCore/QtCoremod.sip"
- just as a note: on ubuntu you have to install python-qt4-dev package to solve this problem
-
- Hi Etienne,
Don't get me wrong, the current implementation is good for power users, but most users aren't that techni... -
- Etienne Tourigny wrote:
> You should link here the new issues you created (as "Related issues")
They didn't seem per... -
01:18 AM Feature request #7058: Snapping priority - Prioritise vertices over lines
- This method would be really useful for many plugins.
2014-02-04
-
-
11:20 PM Feature request #9495: Add new symbol sets
- Probably duplicates #7981
-
- This is better done with a download (upload) web application,similar to the plugin one.
Some interesting set:
* http... -
- Taking from duplicate:
This is better done with a download (upload) web application,similar to the plugin one.
Some ... -
- See also #9495
-
- AFAIK this has been implemented. Please reopen if necessary
-
- AFAIK this has been implemented. Please reopen if necessary
-
03:54 PM Bug report #9213: 'bad_alloc' error at QGIS start
- Tests with latest master has shown that QGIS will throw bad_alloc error when there is less than 880 MiB of virtual me...
-
- mathieu rajerison wrote:
> I am under QGIS Dufour and I can not see none of these options.
>
> In layer properties, ... -
- This relates to #9456
-
- I am under QGIS Dufour and I can not see none of these options.
In layer properties, does rendering refer to "Style"... -
- This may be due because "simplification" of geometries is enabled.
You can disable it -> Layer properties -> Renderi... -
- Line offset in symbology is useful when you have a network with several lines superimposing with others.
But it gene... -
11:33 AM Feature request #9493: Filter improvements
- see my implementation here with commit "browser dock: add normal syntax (with wildcards at begin and end) and case in...
-
- Hi,
when I implemented the filter functionality I did things as simple as possible, using QT's QRegexp [1] class wit... -
- There are a number of simple improvements that I believe can be made to the Browser filter function to make it more u...
-
- You should link here the new issues you created (as "Related issues")
-
- To be entirely honest I wasn't really even aware that the Browser had this functionality. Looking at it now it's quit...
-
- +1 for making _Offset from Centroid_ the default. That just makes sense for polygons, -possible even for points-. Thi...
-
- I also find the wording confusing, I would expect "around centroid" place it right on the centroid, which "offset fro...
-
- @martin Ah yes that gives me better output thanks!
-
- > More obviously a bug - the only part of the WMS layer Metadata screen that's populated is the "properties". This co...
-
- Note - also seems like it should be removed from the "Browser" layer-properties too.
-
- Removing is seems like an idea, at least as long as it doesn't mean anything to the user.
Adding a layer-source that ... -
- I have a number of OGC services set up and accessible via the Browser.
If I right-click on the name of a service for... -
- 1) Add this WMTS service:
http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?service=WMTS
2) Connect using the usua... -
- okay Mathieu.
I had checked before posting but searched for "rounded" but not "round" word. So I hadn't seen the prev... -
- Hi Mathieu, this is Mathieu :)
See a recent issue I filed on this: #9479
Maybe this could be closed as duplicate of... -
- If you want some rounded frames in the composer, you have to import an SVG or an image of it.
It would be nice to ap... -
- Just a small update on the above. I think there's both an issue and a feature request at play here :)
The issue: the... -
- See #9481 for details.
-
- Hi !
I frequently encounter the following bug : depending on other layer's visibility, some labels (of polyline laye... -
04:38 AM Bug report #9489 (Closed): Copy/Paste issue with explicit primary keys
- Copy/paste from a shapefile to a Postgis table with explicit primary keys is no longer possible with QGis 2.0
(Explic... -
- The 2.2 announces gradient fills for objects.
The drop shadows can be applied to labels.
They can be useful to enha... -
- In the composer, the edit button is close to the delete button so that it can lead to delete a layer label instead of...
2014-02-03
-
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- Related pull was merged:
https://github.com/qgis/QGIS/pull/1125 -
- There is also "offset from centroid" option which does what you would expect - the labels are then positioned so that...
-
- When labelling polygons, using 'around centroid' the label placement uses the bottom left of the label instead of the...
-
- Doesn't QGIS come with GEOS? It could be worth having a try if label placement would look better by using GEOS PointO...
-
- There is something called Distance Transform that computes distance from each point to the border. We could probably ...
-
- When labelling polygons the label placement is often suboptimal. I am attaching a contrived example which illustrates...
-
- Fixed in 78ecef6f2a476043516eede1d3a8504481fc1e22
-
- Fixed in changeset commit:"78ecef6f2a476043516eede1d3a8504481fc1e22".
-
- Fixed in changeset commit:"10947f796c24f3c63c10b714d39dd876a5cce8c9".
-
- Translating help files in GUI is always the most painful part, and I am convinced it
is not the most useful one, as ... -
- with this patch, QGIS will try to see if there are geometric features in the clipboard every time it changes.
So as s... -
08:27 AM Bug report #9430: Disable "Paste Features as New Layer" if empty clipboard
- Denis Rouzaud wrote:
> This will output GEOS every time there is a new copy which is not made of WKT strings.
This i... -
- Exporting an image from map composer add its own extension .EPS to the file name. This behaviour is not present for o...
-
- In iterator loop, I call layer.dataProvider().changeAttributeValues({ feature.id() : attrs })
when I comment this lin... -
- I got an error : Error while updating internal statistics
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- NOTE: backported to 2.0 branch with commit:673406d271fbc54071c3cc8835fb1279e4ebe719 and commit:f8028087ad533307774c7...
-
- Fixed in changeset commit:"da4c4292374d049fde2c238a20a0b726ee9cf48d".
-
- Sorry for the noise, the version string is extracted using "postgis_version()", not "postgis_full_version()", so can'...
-
- Like this (will test after lunch):...
-
- Besides, may I suggest to look at the "TOPOLOGY" label in output from postgis_full_version() instead ?
-
- Found the bug, is in the function checking for topology support:
+ QgsPostgresResult result = PQexec( "SELECT cou... -
- Sorry but I cannot confirm the fix. Could be a problem on my side but as of f45e112 I still see the error:...
-
- QGIS is great, and its composer rocks; however, the current frame join style isn't great (see attached map frame), it...
2014-02-02
-
- see https://github.com/qgis/QGIS/pull/1140
the paste menu gets enabled as soon as there is something in the clipboar... -
- I'd vote for removing the add layer dialog, after having added all the missing functions to the browser.
-
- Title says it all. It'd be useful for the qgis.org ubuntugis-based ppa to offer ubuntu saucy qgis master builds as ub...
-
-
- GDAL translate: conversion of ESRI Raster to tiff has a bug
ESRI rasters are viewed by GDAL as a folder with several... -
- Hi !
When you save a composer (as PDF or image...), we could have the composer's name as default filename...
Th... -
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- Duplicate of #8298
-
- it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks
-
- it is an "old" and very annoying bug, that should already be fixed in qgsi master. Can you try and report back? thanks
-
09:49 AM Bug report #9475 (Closed): "Recently used coordinate reference systems" listbox doesn't receive f...
- The Coordinate Reference System Selector has a "Recently used coordinate reference systems" listbox which can be used...
-
03:23 AM Feature request #9471: attribute table isn't refreshed after save
- Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... -
- Hi Matthias,
> Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be... -
03:06 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
- Thanks you!
-
- Giovanni Manghi wrote:
> are the fixes already committed in master or to test I have to use Matthias branch?
Yes, th... -
- Salvatore Larosa wrote:
> Hi Matthias,
> I just noticed that with large shapefiles (over ~70k features)
> when turn ... -
- Nathan Woodrow wrote:
> I had the idea to allow those buttons to be customized as quick functions via a context menu ...
2014-02-01
-
03:52 PM Bug report #9474 (Closed): New vertices added to polygons break shape file topology
- Consider I have a vector layer with a polygon in it.
Wanting to modify the shape of the polygon I decide to add a n... -
- Hi Matthias,
I just noticed that with large shapefiles (over ~70k features)
when turn off the edit mode and you choo... -
-
01:01 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
- Working perfectly now! Thanks Evgeniy.
Cheers
-
- Evgeniy Nikulin wrote:
> GeometryCopier fixed
Thanks Evgeniy ! -
- GeometryCopier fixed
-
- Hi Alvaro
Here it crashes immediately (NB vs ddec663. Maybe it's a Mavericks related issue or another Plug-In relate... -
- Hi Rhenriques, I tested successly the "Random Points" plugin (doRandPoints.py).
I created a new point shapefile with... -
10:54 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Very odd! The MemoryLayerSaver (at least the most recent versions) uses a QDataStream to write the data. This corre...
-
- Fixed in changeset commit:"9ba28b386ffe182044a991ef5f24054dbb1c4c22".
-
- Fixed in changeset commit:"a9f4596f4d7bf4ae713b8872bafac6f508644e25".
-
02:03 AM Bug report #9445: crash during diagram creation
- Hi Matthias,
problem still there (qgis master updated this morning with debian-nightly repo). This the stacktrace:
...
2014-01-31
-
- Fixed in changeset commit:"e0a1d096ad659f8e85a90026441a8b5c0c00953b".
-
10:51 PM Feature request #9451: Create a unified "Add Data" dialog
- I have some early mockups that I did a while ago. I'll see if I can dig them up.
Maybe we need to increase the featu... -
10:46 PM Feature request #9451: Create a unified "Add Data" dialog
- Do we have any mockups for this?
What would be the difference of this in comparison to the browser? -
- Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... -
- Marking this as a blocker. A crash for a basic thing like this should be considered a serious issue.
Please confirm ... -
- Hi Vincent,
Is this an issue in both, 2.0.1 and master? I have just yesterday been working on auto-updates (so be su... -
- This is an issue when you have underlying triggers that will change the table when you save your modifications.
The ... -
- Hi, I added a new issue to GeometryCopier plugin for notify it to author:
https://github.com/yellow-sky/GeometryCopie... -
- Hi Alvaro
So far, in my case, things are behaving normally, after uninstalling the "Geometry copier" plug-in. I'll w... -
- Rhenriques Henriques wrote:
> Hi again
>
> I've isolated the culprit. This slowness is due to the experimental "Geom... -
10:51 AM Bug report #8367 (Closed): "missing font text" red message on layer labeling settings
- Hi,
This was already fixed.
Thanks Larry! -
09:18 AM Feature request #9473 (Closed): Migrate point diplacement style to new labelling engine
- Now the "Point displacement" style doesn't use the new label engine for labelling the diplaced simbol, so the collisi...
-
07:37 AM Bug report #9414: Custom CRS with units=mm stored as units=m
- Leyan Ouyang wrote:
> I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based ... -
03:36 AM Bug report #9414: Custom CRS with units=mm stored as units=m
- I made a small pull request allowing to avoid the OGR conversion before storing the CRS. Based on my quick tests, it ...
-
- I guess everything is around NULL handling. On my memory layer working well, NULL are in fact objects <class 'PyQt4.Q...
-
- With memory provider, there is no workaround with varchar.
Pretty serious issue since it ruins the intersest of plug... -
- Same behaviour when using memory data provider. Strangely, when creating memory layer, all goes well, but when loadin...
-
- This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since...
-
- On Ubuntu 12.04 with today's Master from ubuntugis unstable it works ok.
-
05:18 AM Bug report #9470 (Closed): Cannot remove a group in TOC
- Rick click on a group - Remove
Work fine with 2.0.1 -
- his answer:...
-
- Is the geom _MultiPolygon_?
-
- could not join the video, here it is:
http://youtu.be/d06KI0igcP0
Content:
* add a ring to a fresh polygon in shapef... -
- I received a mail from someone having troubles to add ring in polygons on postgis layers.
He tried both 2.0 and maste... -
06:13 AM Bug report #9357: Lots of PostGIS connections with a standalone python script
- I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi...
-
- I have included two screenshots to help explain the problem I am having. These screenshots were taken at the same poi...
-
04:59 AM Feature request #4002: Enhancement: Option to display title in layer panel from wfs/wms plugins
- I'm curious about this issue. Displaying the name tag instead of the title tag for wms/wfs layers seems to me as a si...
-
04:05 AM Feature request #8112: GetLegendGraphic URL for each Layer in GetCapa
- We are in feature freeze, the pull-request will be merged just after release. I have tested it, and it works fine.
-
- This feature is present in the Sextante version used by gvSIG and it was important to include it in Processing, since...
-
- Hi !
This is probably a duplicate of #7735 -
- Does this issue still exists ?
We don't have this issue on Linux/Ubuntu but there are some path issue on windows. -
03:08 AM Bug report #8055: Panels disabled in the customization config are still available in the main menu
- Now in master they're also listed in the context menu.
-
- Have you tested again ?
If yes and that the bug persists, can you give me accessibility to examples ? -
02:49 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template
- I know that there are workarounds but it's still a serious bug.
This "known limitation" is not really "known" by mos... -
- The known limitation is that QGIS-Server needs a fake X server to render HTML in GetPrint.
We use it in production ... -
- I can't repeat the bug.
Some one to confirm or infirm it ? -
- I can't repeat the bug.
Some one to confirm or infirm it ? -
- A patch has been supplied with a pull-request.
The code change is only 5 lines.
Someone to review ? -
01:57 AM Bug report #9461: Axis order in GML files
- I think setting GML_CONSIDER_EPSG_AS_URN to YES by default would help
-
- See also "[GDAL] GML - Geography Markup Language, section CRS support":http://gdal.org/ogr/drv_gml.html and "[gdal-de...
-
- Hi Arnaud,
Can you try to update the statistics for this layer? (Go to the "Add Spatialite Layer" dialog, connect to...
2014-01-30
-
12:43 AM Bug report #6407: Sometimes QGIS inserts extra blank lines in the project macros when saving
- Interesting.
I observed a similar behavior on Windows if you put metadata in text areas with new-lines (e.g. in the ... -
- r.report module produces a window with a big r.report written. If we save to file, a file with only "r.report" is pro...
-
- I've sporadically run into this before, but it's always gone away after I've shutdown and come back int the morning.....
-
08:44 PM Bug report #8785: Style file not saved in Win 8
- Same as #7936
Cannot save style from layer made from csv. -
- Bug still active in January 2014 weekly (v2.1.0-1) x86. Cannot save styles from a csv, gives no error message.
-
08:04 PM Bug report #9466 (Closed): Print composer - missing string for translation
- Second tab in print composer (i.e. Item Properties) is missing for translation.
-
- Hi !
QgsProject's snapSettingsChanged() signal is broken... It's never sent. It seems it must be sent from QgsSnappi... -
- Hi !
This issue seem to have been forgotten, but I find it quite serious (plus probably not too hard to implement).
... -
- Fixed in changeset commit:"e4f410b589c43ce346930fd2523b815741c6257a".
-
- Perfectly valid request.
-
- Nothing to be sorry about. Consistency is good.
-
- Nothing to be sorry about. Consistency is good.
-
08:48 AM Feature request #9464 (Closed): Consistent Terminology and Syntax
- In writing up documentation for a client who will be using QGIS, when adding a new field or column I suggest using th...
-
-
- My propsed fix was based on wrong assumptions, the main reason for the bad performance was not the fix for #9268 but ...
-
- Fixed in changeset commit:"d378f942a50ad25cc24570e125ea3724e09d79d6".
-
- I have created a branch which could potentially fix both issues, but I did not have any time at all to test it.
If s... -
01:29 PM Bug report #9414: Custom CRS with units=mm stored as units=m
- All units reported by cs2cs -lu should be supported in parsing proj.4 strings in GDAL trunk. See gdal ticket:
http:... -
- Leyan Ouyang wrote:
> edit: seems it does not work either.
No success on my side too.
-
- This is a limitation in OGR, not in QGis. When creating a custom CRS, QGis just uses the OGR function OSRImportFromPr...
-
01:06 PM Bug report #5640 (Closed): QGIS says "Spatialite 3.0.1", but Functions that are new in Spatialite...
- In QGIS 2.0, Spatialite version 4 is working as expected.
-
- Fixed in changeset commit:"70c594984f71f997fe80335e4eac45f3f488f30d".
-
- I confirm, It happens with the node tool, and for Postgis (not tested other providers) but for polygons only.
Duplic... -
- if the SRS is specified like this: urn:ogc:def:crs:EPSG:2169 it is OK, if it is specified like this: EPSG:2169, it is...
-
- Axis order in GML files is still an issue.
I am working with GML files having the data in EPSG:2169.
According to th... -
-
- duplicate #9442
-
- I can't move a vertex anymore in a polygon.
the problem seems to be here
https://github.com/qgis/QGIS/blob/master/sr... -
- When I make iterator, I get only one feature while layer.featureCount() return 28
total = layer.featureCount()
reque... -
07:03 AM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Hi Giovanni, yes it works well in the stable version (2.0.1). Labels of features with NULL values in X and Y fields a...
-
05:57 AM Feature request #7878: Windows 8 Location Provider GPS Support
- OK thanks!
I hope that Windows 8 Location Provider GPS will be supported by QGIS in near future. -
- No we are in feature freeze for 2.2 now so it will have to wait until after that.
-
- I understand. But here is an information that Windows 8 Location Provider GPS Support will be available in QGIS 2.2 (...
-
- No this is a new feature and will have to wait until after the feature freeze.
-
- I would like to ask if there are any chances to support Windows Location Provider in QGIS 2.2? While using Centrafuse...
-
- see pull request https://github.com/qgis/QGIS/pull/1129
-
- GdalTools should rely on commandline tools only for complex operations, not basic dataset info.
The SRS and extent q... -
- Moreover, it would be nice to have a general user option to switch on or off maptips..
-
05:16 AM Feature request #7051: Option to have Map Tips display on all layers
- I also agree that Map Tips should act on all visible layers. There is no point in selecting the layer first, as other...
-
- I had the idea to allow those buttons to be customized as quick functions via a context menu in the tree view. This w...
-
- It would be very useful to add more shortcuts buttons (ex: AND/OR/etc.) in the field calculator.
-
- In an atlas-defined project, a layer that has a rule-based symbology that relies on the $atlasfeatureid will not rend...
-
- If I understand this bug correctly, it's been fixed in master. Are you able to test with a current development versio...
-
- Fixed in changeset commit:"3994c9816a1018d992b0d2308457e7e6c0809586".
-
- Fixed in changeset commit:"78ea81a6bd4342e197f95f099aa14a1104978a55".
-
- I added objectName to all core C++ plugins in commit:0f590db.
Also various QgisApp::get*Menu() (used by changed to a...
2014-01-29
-
- I've tried with NVIDIA proprietary driver, as well as the open source Nouveau driver, and in both cases I can duplica...
-
- Alvaro: that was with yesterdays nightly, so fairly current dev version. In 2.0.1 I get very fleeting white outs - mu...
-
- Mathieu Pellerin - nIRV wrote:
> I've recorded a video of the issue, which hopefully might do a better job than my wo... -
- Ok Mathieu, I'll try, but it will be hard for me, I've never used Linux, much less compiled QGIS in Linux
-
- Alvaro, the log window doesn't throw any error message.
Yes, please, try on linux / ubuntu 13.10, it does seem to be... -
- I am sorry Mathieu, I do not get to reproduce this behavior.
Can you view error messages in log window please ?
I u... -
- Ok Mathieu, thanks, I study it!
-
- I've recorded a video of the issue, which hopefully might do a better job than my words at explaining the problem; it...
-
- Thanks Ramon, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When use... -
- Steps to reproduce:
1. Open a project that has an atlas setup
2. Open the composer in which you've set up an atlas
3.... -
- OK, I can actually reproduce the issue in QGis 2.0.1, so I guess it is not strictly speaking a regression. However, I...
-
- Yes, while a raster layer is being rendered I can not check in legend (the application is locked), but while a vector...
-
- Does it happens only with vectors?
-
- Hi Leyan, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When user ch... -
06:21 PM Feature request #8845: PDF output types & placement.
- I found this link that has more info about PDF placement errors in InDesign.
http://indesignsecrets.com/failed-to-op... -
- I have tested the PDF's created by QGIS on a old Macbook Pro in an old copy of InDesign 3 and they work fine. The iss...
-
- I am still having issues with PDF placement. I have also tried the raster PDF output from QGIS, but still get errors ...
-
- The current line offset algorithm used in line symbol layers is prone to extreme jagged spikes and other rendering er...
-
- Seems to no longer be the case.
-
- Thanks Nathan, It was a curious.
Best Regards -
- Like we have in Python. Well layer.getFeatures returns a lazy iterator that only evals when you call next. A bit lik...
-
- In c# we can write a method as...
IEnumerable<QgsFeature> QgsVectorLayer::selectedFeaturesEnum()
{
QgsFeatureRequ... -
- In C++ or Python.
What are you trying to do? -
- Hi, I have a question, it is possible use in QGIS/Qt something similar to IEnumerable/IEnumerator interfaces of c# ?
... -
- Nathan Woodrow wrote:
> Or better yet just use `selectedFeaturesCount()`.
You are right, thanks Nathan -
- Ups...
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L126
https://github.com/yello... -
- Or better yet just use `selectedFeaturesCount()`.
-
- I think that the problem is:
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L109
It... -
- Hi again
I've isolated the culprit. This slowness is due to the experimental "Geometry copier" plug-in by Nikulin Ev... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... -
-
- Hi again Alvaro
Definitely a plug-in. I've just disabled all and selection is normal. I'm going to isolate the culpr... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is... -
- Try running with @--noplugins@ to check if it is a plugin issue
-
- Hi Alvaro
That example is before or after the code modification? Your selection is indeed quicker. Maybe it's an OS ... -
- Hi Rhenriques, I get "normal" results, I have released a video (~18mb):
http://www.filedropper.com/testissue9348
c... -
- Hi Alvaro
The data that I'm using is restricted. However I've generated a Random 400000 Points layer for the Iberian... -
- Rhenriques Henriques wrote:
> Hi Alvaro
>
> Thank you so much for taking ongoing this annoying issue. I've made the ... -
- Hi Alvaro
Thank you so much for taking ongoing this annoying issue. I've made the modifications to the xxx.h files i... -
- Hi !
There's a rectangle which represents the shadow of the paper in the composer. When moving objects around, they ... -
- Matthias Kuhn wrote:
> I could (partially) revert commit:5c38775 which could probably help here. But this would in tu... -
-
- I think so
-
> But this issue is about other use case.
> I have not closed the issue #9348
the patch proposed has been merged an...-
- Rhenriques Henriques wrote:
> Be careful because this problem is not solved. Selection remains slow as before in the ... -
- Be careful because this problem is not solved. Selection remains slow as before in the latest NB. Even with the modif...
-
- Outch, that was a bad one indeed. Sorry for that.
-
- Fixed in changeset commit:"5f1c8f4980e2c6e78a4a49a3994a46e0da2dc059".
-
-
- Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... -
- Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line.... -
- There's also an old ticket #773 for the same thing
-
- Create a unified "Add Data" dialog that can be used for any data source. This will significantly improve user experie...
-
- Matthias Kuhn wrote:
> Is this still an issue?
>
> Looking at my earlier comments, I didn't take care of this one: "... -
- Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases?
-
- Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases?
-
- Issued confirmed for shapefiles, PostGIS ok.
-
- Hi, I can reproduce the issue on my machine (7a9e682),
but only using Polygon features with OGR and Spatialite provi... -
- I can't reproduce with today's master on ubuntu
-
- Fixed in changeset commit:"7456eb7924edd0a660ca98b3e6d7517bdce2fea8".
-
- Metadata tables of topology are queried even if topology is not available, resulting in an error.
This is when connec... -
- Confirmed for points and lines and fixed. Identify tool is now using as context 1x1 pixel box reprojected to layer CR...
-
- Fixed in changeset commit:"62075294638e3716c244371d056797efda125905".
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
-
- When MapNodeTool is active and user changes the selected nodes, it unnecessarily refresh the map
-
- there is a new plugin which does this: CadInput [0]
as of today, it is available as an experimental plugin.
[0] http... -
- https://github.com/qgis/QGIS/pull/1127
-
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou...
-
- > If you would raise the maxfeaturenumber of your WFS to 10000, I think you would be happy with current 'strategy' :-...
-
- On the WFS "New Connection" - create a new option:
"Maximum Features Returned (if known)" (or some better wording).
... -
- Fixed in changeset commit:"7a9e6820043d26579d8a07f1ce0adde841f842e7".
-
2014-01-28
-
12:27 AM Bug report #9448 (Closed): New spatialite layer never completes
- Same as #8340
-
- I try
1. Layer/New spatialite layer
2. Navigate to a directory and name the new layer test
3. Operation never comple... -
-
-
- Mathieu seems to think I can get the error with this data http://www.licadho-cambodia.org/error2.zip.
What I'm seein... -
- When I toggle layers visibility from the Layers window, sometimes there is no effect. The checkbox is toggled, but th...
-
- I also met this issue, very confusing to see random data changed in the table, even if the underlying data is not aff...
-
- Hi Matthias
> Are you saying, that when you edit an attribute in the attribute table, it should not automatically b... -
- I am not sure I understand this report.
Are you saying, that when you edit an attribute in the attribute table, it s... -
11:34 AM Bug report #9397 (Closed): Project's CRS is not written properly in the project's file
- Fixed by leyan in https://github.com/qgis/QGIS/pull/1104
-
- There is no bug but it is quite tricky. Data defined size may be used in two modes as area or diameter. Unfortunately...
-
-
- Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,...
-
- Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,...
-
- to reproduce:
active layer: an editable line layer
enable offset tool
click on a multipolygon feature -
- fixed in #8cf9936d44bd2bbc733f3d6e57456f6ca65bd508
-
- Hi,
Not all QGIS users are also managing the WFS server they are using so they could raise the server side maxFeatur... -
- On second thought, it is not so much a bug in the logic I think, but more that what you want is a different 'refresh ...
-
- if I run QGIS in debug mode here on Linux, and load your wfs and pan the view, I see this message:
src/providers/wfs... -
- Hi Richard - I think you're more referring to what I reported in this ticket - #8871 - which is a different thing. I ...
-
- sorry for the longread...
I wrote a small blog about this 'problem' http://www.qgis.nl/2013/04/29/qgis-en-wfs-cachin... -
- Everybody can not repeat the issue with these steps but one must zoom to correct area before 2) gives any features. T...
-
01:07 AM Bug report #9444: WFS client not requesting new features when not-cached
- We have been experiencing the same issue. Datasets of different sizes and with different feature limits all have this...
-
- Is this still an issue?
Looking at my earlier comments, I didn't take care of this one: "Postgres: Field length and ... -
- Hi,
qgis crashes when trying to create histogram diagram (no matter which variables or how many variables).
No probl... -
- Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... -
- Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt... -
-
- I have seen this before. OpenJUMP used to do the same. Adding a timer that waits for 0.7 seconds resolved the issue. ...
2014-01-27
-
- Hi Mathieu, to try reproduce the error, please can you send me the situation on the map? (windows size, map center po...
-
- Alvaro, the layer gone missing is definitively linked to on the fly reprojection between ESPG:3148 (meter-based) to E...
-
- Might be a regression.
1) Add http://maps.warwickshire.gov.uk/gs/ows as a WFS service
2) Add "Street Lights" - unche... -
- In windows the snapping to guides is not snapping to the guides.
http://osgeo-org.1560.x6.nabble.com/Guides-and-grid... -
- Is a point grid like in the attached file?
(Yep, I know the red dots are big and glary, but that can be changed) -
-
11:19 AM Bug report #8600: QGIS 2.0 not working with NTLM proxy
- Yes before the switch happened in the plugin manager NTLM worked for downloading plugins. Other core web access funct...
-
- Hi Jeremy,
is this really a regression or it wasn't supported either on older qgis releases?
The blocker tag is res... -
- It seems that editing broke in QGIS master
Testing on
2.1.0+git20140126+55727f7~precise-ubuntugis1
Trying move a ... -
- new part's geometry is invalid -- to be more precise
-
- trying to add a 1 segment line part to a feature in a multiline layer gives "invalid geometry" after right clicking.
-
- When there is only one column in a database table, it is displayed on the canvas, and nothing is shown on the table i...
-
- There are still reasons not to do so:
* Processing is not always 100% stable
* GDALTools shows the gdal command line,... -
- How about porting gdaltools to processing toolbox (those that do not have an equivalent) and removing gdaltool?
-
- oh, right, I had forgot about it :)
-
- gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago
-
- gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago
-
- Antonio Locandro wrote:
> any updates? do you think this could be done for 2.2 or 2.4
it should be relatively easy t... -
- The following certainly happens with WMS, WCS, WMTS. Probably happens with other data providers, but they don't log a...
-
- Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... -
- Might be related to #6941 and/or #9196
-
- Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ... -
- I like the "Extent" functionality on the "Save Raster layer as" dialog. Could that not be used/replicated?
That gets... -
- For the extent-based export, there are two options:
1. have just a checkbox ("Export only features visible in map can... -
- For whatever reason, my WMS server isn't responding to queries at all (timeout).
To replicate: Requires Non-functioni... -
- Confirmed as fixed.
-
04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway... -
- Note: Apparently these fields are for user metadata. My question then is - why? They can be easily automatically popu...
-
- QGIS should have an option to simplify map layers when exporting to svg. Otherwise complex map layers result in svg s...
-
03:37 AM Bug report #9415 (Closed): Problem with current Debian build
- Fixed in latest master version.
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ...
-
- Fixed in changeset commit:"177e5a195249f0ebae68c7a76acebb0fb95b7d36".
-
- Alvaro Huarte wrote:
> Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The cur... -
- This is the error I get when trying to save my changes:
Could not commit changes to layer sgev... -
- I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... -
- I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl... -
- I can confirm that snapping works (at least on master) also for measuring tools.
-
- I can confirm that snapping works (at least on master) also for measuring tools.
-
- Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... -
- Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m... -
- Antonio Locandro wrote:
> Any updates on this?
nope. -
> I added a new description/title to this ticket to makes things a little more clear. It seems that overall things a...-
- No idea, sorry - I just noticed that the error is gone when connecting from master
-
- No backport ?
:'(
Any pointer to the fixing commit, in case anyone is willing to backport ? -
- Yes. However, a test revealed that in master the problem does not show off. As no backporting will be done, I think t...
-
- Does the user you connect as have permissions to read topology.layer ?
-
- Clicking on topology.layer of a postgis_topology DB consistently returns
an error. PostGIS 2.1.1. Tested on Debian un... -
- I do not test this case use, but this patch
https://github.com/qgis/QGIS/pull/1114
can fix this issue
Alvaro
-
-
- I would not mind passing this issue to "Feature". And if there is no better solution, we could inform the user that h...
-
- Activating versioning in DB Manager throws an error:
language "SQL" does not exist
QGIS 2.0.1, on Debian and Window... -
- Seems fixed. Please reopen if necessary.
-
- Seems fixed. Please reopen if necessary.
-
- Seems fixed. Please reopen if necessary.
-
- AFAIK, this has been implemented. Reopen if necessary.
-
- AFAIK, this has been implemented. Reopen if necessary.
-
- Then to avoid more confusion I suggest to just remove the whole "Layer source" field.
Currently the is no universal ...
2014-01-26
-
- Hi Alvaro, thanks for looking into this long standing and painful issue.
Does this
#9348
duplicates this ticket?
... -
- Reopened to enable ids validation in new optional parameter:
QgsVectorLayer::setSelectedFeatures( const QgsFeatureId... -
-
- Nathan Woodrow wrote:
> I agree the check is not needed. We have the ids and if they are not in the layer then they j... -
- I agree the check is not needed. We have the ids and if they are not in the layer then they just don't get selected n...
-
- Any selection of features in QGIS calls to 'QgsVectorLayer::setSelectedFeatures' and from this commit (#39fab67e602aa...
-
- Radim Blazek wrote:
> The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by co... -
12:46 AM Bug report #9432 (Closed): Points In Polygons: New column should be integer not real
- Maybe I'm missing something, but if we are doing a count the result will always be a whole number so the data type of...
-
- Jeremy - I am not the developer of this feature. But yes - currently, the tables are all fetched to the client and th...
-
- Does this feature support large relationship tables from a database? I tried to build a relationship between PostgreS...
-
- I'll close this issue as it's implemented in master.
However, the implementation is currently somewhat confusing as ... -
- Isn't this fixed in master?
-
04:40 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
- This kind of behaviour is available in other COTS software, I don't know if people actually pay attention that it cou...
-
- The snap settings are taken from digitizing options
-
- @paolo, how do you enable this? I tried measurement yesterday and it didn't snap at all. I was under the impression t...
-
- It's blocker. We can not use the server > 1.8.
-
- Hi !
A google-images search on "north arrows" gives a lot of ideas.
Please add only very simple, clean and pro-loo... -
- I guess adding arrows would mean generating SVG for them right? If someone can point me in the right direction and pr...
-
- I also get a problem with int4 columns from a PostGIS source. Error is "Cannot create field id (int4,int)". PostGIS s...
-
- The new "paste features as new layer" feature should be disabled if the clipboard is empty.
Also see #9083
In addit... -
- I think a few more options should be added apart from what its proposed, currently only zebra option and another I ca...
-
- Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected map in other COTS software,...
-
- Any updates on this?
-
- Yes I think this would be useful
-
- I would think the new UI/UX user list would be able to comment on this topic and reach a resolution, hopefully for 2....
-
- I think this would be an awesome addition, maybe Nyall can look into it
-
- any updates? do you think this could be done for 2.2 or 2.4
-
- Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The current settings are prese...
-
- Rhenriques Henriques wrote:
> Nyall is right! I've only tested in projects with projected units. The settings are not... -
- > Alvaro Huarte wrote:
> > One question about another issue:
> > Why QGIS does not draw current selected features as ... -
- Giovanni Manghi wrote:
> ... I have seen the correct values (the ones defined in the "value" column of the map), but... -
- Alvaro Huarte wrote:
> >
> > I have tested your patched QGIS and unfortunately it is still not working.
>
> Very we... -
- closing for lack of feedback
-
- closing for lack of feedback
-
- I could (partially) revert commit:5c38775 which could probably help here. But this would in turn reintroduce bug #926...
-
- Matthias Kuhn wrote:
> Is it a regression?
it seems faster in qgis 2.0.1 -
- Is it a regression?
-
- dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... -
- dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme... -
- The original issue described in this ticket seems gone in the latest master.
-
- The original issue described in this ticket seems gone in the latest master.
-
- seems to work as expected on the latest master.
-
- seems to work as expected on the latest master.
-
- Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... -
- Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa... -
- Alexander Bruy wrote:
> Still cannot confirm. Export takes several seconds.
Hi Alex,
I can confirm the issue at so... -
- seems ok on master. Please reopen if necessary.
-
- seems ok on master. Please reopen if necessary.
-
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
- I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression. -
-
- Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105... -
- Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105ecfa8. Disabling simplify geometr...
-
- Closing for lack of feedback/sample data to replicate.
-
- Closing for lack of feedback/sample data to replicate.
-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...-
- Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... -
- Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th... -
- Still true?
-
- Still true?
-
-
- Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary.
-
- Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary.
-
- Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... -
- Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... -
-
-
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ... -
- Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... -
- Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi... -
- closing for lack of details, impossible to understand precisely what is the issue and how replicate it.
-
- closing for lack of details, impossible to understand precisely what is the issue and how replicate it.
-
-
- closing for lack of feedback.
-
-
- closing for lack of feedback.
-
09:23 AM Bug report #9428 (Open): Transparency of markers in marker line is neither applied nor stored
- The GUI for markers in a marker line has a transparency slider but the setting is not applied to the markers in the p...
-
- Fixed in changeset commit:"3c5c7de3023c9ec2e9daa4d74b4846fd3e35caad".
-
- Done in pull request https://github.com/qgis/QGIS/pull/1113
-
- Hi !
Composer Legends and Composer Scales refer to a particular map.
This map is selected by the user with a drop d... -
- Great, thanks ! I set done to 100% and hope it will be merged soon !
-
- Giovanni Manghi wrote:
> >
> > Hi Giovanni, if I create the spatial index and update the extent from layer properti... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor... -
- Giovanni Manghi wrote:
> after making a whatever editing operation the vectors do render correctly, so maybe after al... -
- Hi, I have tested the data and ArcView 3.1 crash! I edited the code for QGIS does not use the current map extent to f...
-
- after making a whatever editing operation the vectors do render correctly, so maybe after all is a data issue(?). Not...
-
- I just compiled from source the latest code and have issues with the attached vectors (try zoom in).
This does not s... -
- In commit:f4a7fcb I also added rendering of missing SVG symbol, currently question mark ('?'), in case an SVG file do...
-
- Fixed in changeset commit:"55727f755afac80243433141d8ae74bf2b5734db".
-
01:54 AM Bug report #9425: grass_script.bat always fails if USERNAME contains MBCS
- I'm sorry, the report explains 2 bugs.
Former is "Windows batch file which ends LF can't process MBCS". Attached patc... -
- On Windows, if USERNAME contains Multi Byte Character Set, processing with GRASS (grass_script.bat) always fails.
The... -
- please note that the values in the column used for ordering are not (over)written after pressing "save", anyway even ...
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- Confirmed in master, a huge regression that must be fixed before the new release.
-
- If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... -
- If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete... -
-
- Yes you can close it, thanks all. The original issue as well as the related issues brought up in the discussion are a...
-
- Further info: loaded rasters can in general be loaded, whereas those resulting from in-db elaborations (e.g., aspect ...
2014-01-25
-
- I can show rasters, except for those registered out-of-db (-R)
-
- When editing the Attribute table of a vector layer writing the value in a column will automatically update that value...
-
10:53 AM Feature request #9373: Support for UDP connections in GPS Widget
- Dear all:
I've made a PR !#1112 regarding to this issue. I hope that everything is OK, but I have some doubts with t... -
- Reopen if necessary.
-
- Reopen if necessary.
-
- Actually I cannot confirm in master - for me the sorting is case insensitive and respects accented characters (see at...
-
- >
> I have tested your patched QGIS and unfortunately it is still not working.
Very weird! I follow step by step yo... -
> Done:
> http://www.filedropper.com/qgis-osgeo4w-210-i8818-setup-x86
Hi Alvaro, many thanks for your time!
I hav...-
- greatest, latest, and most regressing one ... (assumption, not verified, but made with high experience of the matter)
-
- Sandro, considering QGIS 2.2 is (planned) to be released in less than a month, might simply be better to update to th...
-
- Could this be backported to 2.0 branch too ?
-
-
- Fixed in changeset commit:"781e34a5bc690df4c1868bbc1b35cfdda0eb25da".
-
01:15 AM Bug report #9423: QgsGeometry.asMultiPoint() returns wrong values
- QGIS 2.0.1 also returns correct values. I get wrong results with master version (eaf5725).
-
- Tested with this code:...
-
- If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th...
-
- If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th...
2014-01-24
-
- Agreed, no migration should be necessary
-
> I am leaving this open for this last problem, but I am not going to fix that.
I'm personally ok with this. When a...-
- Regarding backward compatibility. This was obviously buggy in 2.0 and I am not convinced that we have to keep backwar...
-
- Vertical and horizontal markers lines fixed in commit:c21973f.
The longest interval is taken as pattern length. Smal... -
- Color/width: removed from QgsLinePatternFillSymbolLayerWidget in commit:95c3c6f because such options (for sub symbols...
-
- This issue has common background with #8974, some problems you may find testing this issue were fixed there.
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s...
-
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... -
- Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a... -
- Matthias Kuhn wrote:
> I don't know, if this PR really fixes the described problem. If I am not mistaken, this proble... -
-
- I don't know, if this PR really fixes the described problem. If I am not mistaken, this problem is related to the val...
-
- Fixed in changeset commit:"eaf5725f569fab62a67a51c0b0bddbb6a44797a2".
-
- Note that this is a regression. Version 1.8.0 works fine, showing a single entry with the correct SRID (0) and the co...
-
- Multipolygon PostGIS tables with unknown srid (0) appear twice in the "Add PostGIS Layer" dialog, once with a SRID pr...
-
- The French Guiana RGFG95/UTM22N projection (EPSG:2972) is bad defined. This seems to be corrected under the dev versi...
-
10:40 AM Bug report #9419 (Closed): Jenks natural breaks has a bad interval
- Running Jenks classification on results in the last interval with an erroneous upper bound value. See attached pic. D...
-
- In qgis master there are CRSs (at least the ones I'm used to use, from Portugal and Italy) that are now missing the t...
-
- What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... -
- What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then... -
- Gavin Fleming wrote:
> bug appears to be fixed in 2.1.0 Master (though the new north-oriented CRS definitions Tim add... -
- An update.
I decided to take a look at the connections that were being sent to PostGIS while my script was running u... -
- Giovanni Manghi wrote:
> interesting, what others tools (if any) would benefit from this parameter?
Only gdalwarp us... -
- Etienne Tourigny wrote:
> Probably needs an argument like -tap
interesting, what others tools (if any) would benefit... -
- Probably needs an argument like -tap
-
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
... -
- WFS seems to be fine.
-
- Note: A similar thing also seems to happen with WMS. Rather than zoom to the bounding box of the layer (try "z_OS_Ras...
-
- Thinking about it more, it needs to be able to allow multiple possible exports:
Selected / All
Visible / All
And an... -
- > today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success...
-
- > today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success...
-
04:47 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
- Hello,
today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have su... -
- Marisa Silva wrote:
> Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in ad... -
- Jonathan Moules wrote:
> I'd suggest therefore that it shouldn't be shown. Instead it should show the server name tha... -
- I'd suggest therefore that it shouldn't be shown. Instead it should show the server name that has been connected to. ...
-
03:41 AM Feature request #8868: Don't show provider specific layer data source string
- The information in the field is actually right - for all data providers it displays the internal resource identifier....
-
- The WMS query shown is wrong on a number of levels:
1) It doesn't start with the URL, but ends with it as a paramete... -
- Hopefully fixed, please test.
There were other skeletons in the closet like misalignement on offset, missing line m... -
- Fixed in changeset commit:"3fd75ac403c65976d75930c575fc5a20eab4f10b".
-
- Fixed in changeset commit:"760529bd7fd1c63ae5cc93ab3fd9392a68e0fda2".
2014-01-23
-
- I am building with master (a30a9dd) and it fails when I use:
//MODIFIED property for variable: WITH_PYSPATIALITE
WIT... -
- Ok, so problem was indeed my very old osgeo4w setup executable. The spatialite node now works when installing qgis ma...
-
- Alexander confirmed via IRC that on his machine, both the 32-bit and 64-bit osgeo4w qgis master packages do not exhib...
-
- Thanks Jürgen!
-
- Fixed in changeset commit:"a78a0035ac397c72cdbf878f69eb0060bd4fed66".
-
- May be 'QScopedPointer::swap' ( http://qt-project.org/doc/qt-5.0/qtcore/qscopedpointer.html#swap ) ?
-
- I can not build QGIS in visual studio when this commit is applied: commit:e8205c98c938b60569c30d5c0bbec3acab1f441a
t... -
08:38 AM Bug report #8068: Wrong font display in qgis server
- Hi,
can we expect this issue to be fixed in version 2.2? It would really be appreciated. We havn't upgraded our produ... -
- aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... -
- aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution.... -
- In debian rules file, section: install: build
perl -i -pe 's=#!/usr/bin/env python=#!/usr/bin/python2.7=;' $(find de... -
- Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in administrator account an...
-
- Marisa Silva wrote:
> Sorry, where can I view that information?
> I've already performed uninstall and install again,... -
- Sorry, where can I view that information?
I've already performed uninstall and install again, also installed in anoth... -
- Have a look at your installation logs.
Might be that the installation was broken before the CRS synchronization at t... -
- Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... -
- Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can... -
- I try to set up a custom CRS with
@+proj=tmerc +lat_0=51.4 +lon_0=7.0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0... -
- I updated the CRS properties management in this pull request, this should solve the issue: https://github.com/qgis/QG...
-
02:11 AM Bug report #9413 (Closed): Misalignment after raster clipping
- After clipping of a raster with a vector mask layer using the "gdalwarp -q -cutline" function, the clipped raster sho...
2014-01-22
-
- An alternative to this (maybe more intuitive) would be to implement a wordwrap() function in the expression builder:
... -
- It would be really useful for label's multiple lines formatting to be able to set a minimum number of characters for ...
-
- Right now, the X and Y position value of an item is a value that reflects the absolute position within the qgis compo...
-
- Hi Andreas
Thank you so much for the reply. The problem happens with or without spatial index. Tested both situation... -
- Does the point shapefile have a spatial index. Can you share the data so we can test the issue?
-
- There is that. But maybe the tool in the Raster Menu was designed that way because of some use case?
Anyway, it's im... -
- Filipe Dias wrote:
> Giovanni Manghi wrote:
> > The different stats are explained because all the pixels that have 0 ... -
- Giovanni Manghi wrote:
> The different stats are explained because all the pixels that have 0 value are evidently cou... -
- The different stats are explained because all the pixels that have 0 value are evidently counted in the stats (that d...
-
- SAGA 2.10/"Clip grid with polygon" produced a raster with the same statistics as the output from "clip raster with ma...
-
- I tried clipping a raster with "Clipper" from the Raster Menu and "Clip with mask layer" from the Processing Toolbox ...
-
- Assuming that you are using the column "Average.Depth" to create the categorized symbology, then the "." in the colum...
-
12:36 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master
- Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... -
- Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i... -
- I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac...
-
- I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac...
-
- If you have evidence that qgis creates bad indexes or that corrupts them, then please file a new ticket.
-
- Source of problem: my meddling with the shapefile had caused a ".qix" file to be created. Overwriting the spoiled fil...
-
- I would be happy to test the data: giovanni DOT manghi AT faunalia DOT pt
-
- Hi all.
I have a problem with a vector shapefile sent to me from the British Oceanography Data Centre (so I assume ... -
- Thanks Jurgen, will do.
-
- Simon Dedman wrote:
> Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.
>
> [...]... -
- Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while....
-
- If you use the full file path as key, this is what gets stored in the settings, and this does NOT work.
connections\... -
- Changing the way connection are stored in settings requires some thinking, in order to not break things.
Perhaps an... -
- Hi ! Thanks for quick reaction !!
Actually, I sometimes need specifically to have two spatialite databases with the ... -
- Added warning in commit fbdf34c2b26e90f7c6e077eb54be53cae03d100f - and previous connection is preserved.
Setting thi... -
- It seems to me this is by design and would be hard to change. sqlite connections are stored in QGIS2.conf like this,...
-
- Hi !
If you have two spatialite files with the same name but in different folders, you can only connect to one using... -
- Fixed in changeset commit:"9aa4155e36c01e4fb5f851faa44a05c8764c4279".
-
- Steps to reproduce (tested in 06b1fbc):
1) create a new file
2) create a new composer
3) set number of pages to 2
4)... -
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Yes, it happens many times and the timeout option does not seems to have any effect.
-
- Hi Marisa
As Giovanni, I'm not having any issues with any portuguese CRS with the same version under Windows or MacO... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ... -
- Hello,
I've installed QGIS Dufour 2.0.1 (in a windows 7 professional at 64 bit) with: "QGIS-OSGeo4W-2.0.1-3-Setup-x86... -
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
- Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue?
-
-
-
- Hi Nyall, if you are testing a postgis layer, then these error comes from a bug in ST_Simplify function of postgis ( ...
-
- Hi Nyall, the pull #1087 was merged, can you test your issue please ?
-
- the option is much alike the one for lines, that allows not repeat the label of connected lines. In this case would a...
-
- It is sometimes useful to remove duplicate labels from the map. The remaining label can be placed over one of the fea...
- 04:22 AM Feature request #6091 (Closed): Add a "recent used" expressions list in field calculator
- Fixed in changeset commit:"5c1fed5b2eb0f6c4dc30e39abd12f11a750d5f32".
-
- Hi !
I find it unclear for the user that user-installed plugins and built-in plugins are not differentiated at all... -
- Hi !
Currently, to open a database in DBManager, you must first create a connection to it in the Browser.
Why not a... -
- It would be great to able to use the excellent new Field Calculator tool in the Modeler. At the moment only the old F...
-
- Fixed in changeset commit:"12a463d2b06d5f10b94d4143c86465d8c4b0ecad".
-
02:48 AM Feature request #9399 (Closed): Print Composer / Atlas generation - scale settings
- Let the Atlas generator respect scale settings defined under "Project
properties" --> "General" --> "Project scales" ... -
- Tim,
How are you exporting the composition? Are you using the built-in pdf export option or printing to a pdf driver...
2014-01-21
-
- Larry,
How'd you go with your fix for the other settings? Do you have a public branch I can test? -
12:51 AM Feature request #9398 (Closed): map overview in composer with different coordinate systems
- In the map composer, if the overview and the principal map use 2 different coordinate systems, the overview rectangle...
-
- I can't replicate this... are you able to re-test and give me steps to reproduce it? Thanks!
-
- Fixed in changeset commit:"2e4fbc21a62129e62b0702f9e87f5dd86809c710".
-
- Fixed in changeset commit:"befe56ff1be31dd1ef522de5d514a393394a951a".
-
- IMO, this needs to be re-opened as follow-up clean ups are needed:
1/ *Saved symbols that relies on line pattern fil... -
- Hi !
The project's CRS seems to be written in two places in a QGIS file : in the <properties>/<SpatialRefSys> block ... -
- Borys Jurgiel wrote:
> Is it the default font in Ubuntu? If so I'd set the bug priority to High.
>
Yes - it's the d... -
- Is it the default font in Ubuntu? If so I'd set the bug priority to High.
Btw. The same problem with DejaVu Sans on ... -
- I confirm problem on my system too.
-
- Here's a strange one... Using Ubuntu, it's impossible to select the "Regular" variant of the "Ubuntu" font in label p...
-
12:11 PM Bug report #8615: Python error on startup (Windows 64-bit)
- Just received the same error on a QGIS 2.0.1 64-bit install on Win8.1
-
- Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
-
- Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
-
- I'd classify the current behavior as a serious usability issue. Here is why:
* Most users are happy with the defaul... -
07:23 AM Bug report #9395 (Closed): WFS layers time out, even though the timeout is not reached
- Whenever I open existing projects containing WFS layers, I often get errors like this in the log, and the layer is ma...
-
- --------- THIS MESSAGE IS OLD AND SORT OF NONSENSE AND YOU CAN SKIP IT TO THE NEXT ONE -----------
Well, this is wha... -
- Well, AFAIK it works already... should it be closed?
Best regards -
- This can be closed. Appears to be working now (master).
-
- See:
https://github.com/qgis/QGIS/pull/1096 -
03:45 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project
- Good morning,
in attached you'll find a zip with the project, a shp layer and the html file used in the map composer... -
- Can you please share a project which is showing this behaviour?
-
- Hi all,
I've just posted this problem on gis.stackexchange "here":https://gis.stackexchange.com/questions/83522/grad... -
01:45 AM Bug report #9392 (Closed): Ortho Projection produces artifacts
- I`m trying to create a sphere-like view using qgis and the "world from space"-projection http://spatialreference.org/...
2014-01-20
-
- Good morning Giovanni,
I still have the problem with last nightly version form osgeo4w (00c8196) -
- Can you test QGIS master and report back? Thanks!
-
-
- IMHO the problem will be apparent with any device: the discontinuity between adjacent tiles will always be visible un...
-
- Yes the border problem seem resolved.
>The problem is, that current implementation is based on tiles (QgsImageFillSy... -
-
11:52 PM Bug report #9388: rpad doesn't work
- Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t...
-
- Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t...
-
- Nathan Woodrow wrote:
> What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
>
> This is my output in ... -
- What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
This is my output in 2.0: @001 100@ and in master... -
- Also posted this here previously: http://gis.stackexchange.com/questions/83338/how-to-format-labels-with-leading-zeroes
-
- When I try to use the "rpad" function to label point features, it doesn't add any padding symbols. The function "lpad...
-
- Within the "Style" column of the Tileset table on the add WMTS layer dialog, ensure that the WMTS get capabilities l...
-
- Today's QGIS NB crashes before open under MacOSX Mavericks.
Cheers -
- Appears frequently on the 32-bit Windows version, no matter if the Windows OS itself is 32- or 64-bit
-
- does not happem on qgis master 64bit/linux.
Does happen on master/Windows? -
- Please open the attached project file with QGIS 2.0.1 32-bit in Windows. Login is:
Username: vejlby
Password: testjy... -
- Confirmed on Linux 64bit/master...
-
- Confirmed on Linux 64bit/master...
-
- Steps to reproduce:
Open attached project file in QGIS 2.0.1 32- or 64-bit. Login with
Username vejlby
Password tes... -
- I'm not able to replicate, it would be possible to attach sample data/project?
-
- I'm not able to replicate, it would be possible to attach sample data/project?
-
- Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post... -
- Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post... -
- Matthias Kuhn wrote:
> Giovanni, any progress on this?
Hi Matthias,
these days I'm not able (lack of time, sleep de... -
- Giovanni, any progress on this?
-
-
12:58 PM Feature request #9385: Print composer - Construction Lines
- Nyall Dawson wrote:
> This is already possible - you can drag a line from the ruler to add a snap line at any positio... -
- This is already possible - you can drag a line from the ruler to add a snap line at any position on the page. Is that...
-
- The print composer could really do with a way to align all the map features, this is done in many software (CAD, ArcG...
-
-
- Agreed, please remove
-
- This is currently possible - click the "Line Style" button in the grid properties.
-
- Within the QGIS 2.0.1 print composer, there are options to have either a line or cross graticule grid on the map fram...
-
- Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap... -
- Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap... -
- Hi Nyall,
So far with the vector data I've tried, I haven't seen any issue, it would appear it is predominantly the ... -
- Hmm... looks like you are using the OpenLayers plugin in your map, is this correct? Can you please confirm whether yo...
-
- Contents of map frame doesn't fully fill frame (see attached image).
This works on the same PC (Windows 8.1) within 1... -
12:04 PM Bug report #9389 (Closed): Identify Feature - not possible to scroll horizontally
- I have the problem, that in the "Identify Feature" window, I can't scroll to the right side at a large row.
QGIS: 2.... -
- I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m...
-
- I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m...
-
- I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m...
-
- cleaning unnecessary fields does the trick. Closing the issue, this is totally a grass's one.
-
- Error occurs in GRASS native GUI... May be a OSGEO4W trouble?
-
- Well, I tested in grass plugin, and same error. Processing is not to be blamed though..
Not sure I must move to gra... -
- Hi, v.sample fails when creating temp table of sampling points.
It seemed to wrok in processing version of december ... -
- I'm interested in adding export non-vectorized text as an option to the svg export.
Larry:is it the way to go ?
-
- The addition of dynamic text through expressions in QGIS 2 is awesome! Unfortunately I still need to fill out the coo...
-
- Within the current QGIS Print Composer, there are only the options to use a line grid or cross grid symbol. I believe...
-
- Attached file was created on QGIS 2.0.1 64-bit. When it's opened in QGIS 2.0.1 32-bit, QGIS crashes with a minidump a...
-
- Hi Nyall, are you using current master ? I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52...
-
- I'm running into an issue with the new rendering simplification option. With this enabled on a layer which has labels...
-
- Both in current testing and 2.0.1 (here on Debian), I have troubles with the WMS getfeatureinfo output.
It defaults ... -
- Mathieu Pellerin - nIRV wrote:
> I think we should close it when the polygon layer not rendered issue is fixed (which... -
- I think we should close it when the polygon layer not rendered issue is fixed (which occurs when simplify geometry is...
-
- Mathieu Pellerin - nIRV wrote:
> Alvaro, @nirvn is me :)
Argggggggg, sorry, I have not noticed.
Then Can I close thi... -
- Alvaro, @nirvn is me :)
-
- Hi Mathieu, @nirvn commented that layers disappears in the extreme zoomed out scales even with simplification disable...
-
- As soon as you install the updated OGR on your machine, QGIS will make use of it, even if you still run QGIS 2.0. The...
-
- @Matthias: The OGR side seems to be fixed. Can you have a look at our own code? Or do you know whom to ask? Will QGIS...
-
- Hello,
What kind of specs should be needed (ports, hosts...?
AFAIK It depends a lot on the R/V, but basically the m... -
- Could you include pointers to any specs please?
2014-01-19
-
- Good morning to everyone,
I am facing a little problem with html frame in the map composer.
It is very helpful and p... -
- Sometimes NMEA data (not only GPS but sounders, etc) data is feeded through UDP datagrams. This is common, for insta...
-
- CRS slector is different in many dialogs. See e.g. Save as... dialogs for raster and for vectors.
The raster solution... -
- Mathieu Pellerin - nIRV wrote:
> Alvaro, the first project attached to this issue works much, much better with your ... -
- Hi Giovanni, thanks, I know it, I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52ff49c8e35...
-
- Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... -
- Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... -
- Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... -
- Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g... -
- The new "Paste Features As" doesn't correctly handle PostGIS layers with a bigint columns. Attempting to paste featur...
-
- Full discussion under http://osgeo-org.1560.x6.nabble.com/gdal-dev-gdalinfo-coordinates-problem-td5098718.html
Sampl... -
- Hi ! It seems the bug reappeared (or never really disappeared ?!!).
It affects the "save query" feature of the DB ma... -
- I very much agree !
The fact that layers which are currently unavailable are deleted upon opening a project is a big... -
- Hi !
When duplicating spatialite layers using the "Duplicate layer" command from the contextual menu, it takes somet... -
- Hi all, apologies for reopening if this isn't the best way of raising this.
I've just posted this problem on gis.sta...
2014-01-18
-
12:46 AM Bug report #7368: QGIS writing out incorrect .prj file
- Confirm such behavior on latest master.
-
- Hi Mathieu,
I have released a new pull request that I hope to be merged soon.
https://github.com/qgis/QGIS/pull/1087... -
- Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil...
-
- Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil...
-
03:04 PM Feature request #9368 (Closed): Print Composer Map Label and Texture Rotation
- Currently, when map rotation is specified in the print composer, everything on the map is rotated, including labels a...
-
- Petras Jokubauskas wrote:
> **Should I assign myself to this issue?
No, I'll tackle it after feature freeze. Should... -
03:35 AM Feature request #9366: Allow scale values < 1 in composer map items
- It is possible to crash Qgis using Print composer in state as it is now, so at first it is bug report.
However it is... -
-
- Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts? -
- Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts? -
- hello,
this is connected a bit with #9366, but this post is just about scalebar alone.
At this moment, thanks to rest... -
- Works in master
-
- Works in master
-
-
- see also http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030315.html
2014-01-17
-
- why does it made citation?
-
- Hello everybody,
this is my first post, sorry if it is too big,
I am geologist/ petrologist and use QGIS not only for... -
- Partially fixed in commit:8f8ea0e, the line symbol layer is now used for fill, outline is not drawn (like with point ...
-
- Fixed in changeset commit:"c2a8ad0a35894418d98ccc44b02f3b8e8f89de86".
-
- here's the project file
-
- > I also see the layer-not-rendered issue with polygon layer too. Is the patch covering this case too?
Hi Mathieu, ... -
- Fixed in changeset commit:"8c9f41cfa1e6e8cc6625a3436756e3b29754142c".
-
- Alvaro, that was fast :)
I don't have a build environment ready to test patch :/ can certainly verify when its comm... -
- Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro -
- Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro -
- Note: the regression was spotted on a linux (Ubuntu 13.10) machine, not tested on windows yet.
-
- To note that QGIS "can" already export (from the canvas, not the composer) as geopdf: the format is supported in gdal...
-
- Hi, I release a new pull request (https://github.com/qgis/QGIS/pull/1071) it attempts to correct this error.
Can you... -
03:26 AM Bug report #9365: QGIS save as SLD style for graduated styled layer different from what it's show...
- Please consider this pic as IMAGE 2 - Geoserver Output Saved SLD
-
- I've found that when applying a graduated style to a layer in QGIS, if I save the style as SLD to use it in my Geoser...
-
02:33 AM Feature request #9352: update 7 parameter transformation fir Israel ITM grid
- This should be reported to the Proj4 bug tracker, because QGIS takes all CRS from there.
Proj4 only uses valid EPSG ... -
01:22 AM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper
- Alvaro Huarte wrote:
> Hi Bernt, this patch was merged to master.
> Next release will contain it!
>
> Best Regards
>...
2014-01-16
-
12:51 AM Feature request #9364 (Open): Provide a UI for creating custom Projection
- I often have to work with data, which is my Country's statutory projection. This is a custom LCC Projection, which do...
-
- Often I have data in Geographic Lat-long and want to buffer them to 1km or something similar.
The current way to do... -
- Feels the same as #8771 speaks about geopdf but it would be more safe to call it as geospatial pdf because GeoPDF is ...
-
12:25 AM Feature request #9362 (Open): Export PDF layers from QGIS map composers
- As in the attached image.
PDF layers are formally known as Optional Content Groups.
"They represent a collection o... -
- Can you share the 1.9 project file?
-
- QGIS 2.1 nightly build crashed on loading a 1.9 project file. So I starting it as root and it now showed a bad WMS la...
-
- A very serious regression has made its way into QGIS master following the (2nd) simplify geometry commits. Whole laye...
-
- Using the client wcs from last trunk,
I notice that the client wcs with the option "always-cache" use a local cached ... -
- Hi Bernt, this patch was merged to master.
Next release will contain it!
Best Regards
Alvaro -
10:12 AM Bug report #9358 (Closed): Qgis 2.1 for Mac isn't able to save Project on a server share (Ubuntu ...
- If I open a project located on a server share, Qgis creates immediately a new file in the project location with the s...
-
- I have a standalone python script that creates a bunch of PDFs for me.
Recently this script has developed an issu... -
- Hi
I've been testing the atlas updates here. One thing I got stuck with is that although I set the composition page ... -
- Even in the case of points (no complex calculations to do), it takes hours for half a million points (on a slow machi...
-
- Giovanni Manghi wrote:
> yeah I know, this is why I wrote "apparently". Anyway now I tested also under Windows and ap... -
- Radim Blazek wrote:
> The last considerable change in WCS client was 3 months ago, so I have no idea how it got broke... -
- Probably this could be solved with a new command, allowing the user to arbitrarily reduce the precision of coordinate...
-
01:18 AM Feature request #9352 (Closed): update 7 parameter transformation fir Israel ITM grid
-
Please update +towgs84 parameter for the Israel ITM grid (EPSG:2039).
The 7 parameter transformation is officia...
2014-01-15
-
- When loading a GPX, by default tracks, routes, and waypoints are loaded, even if empty. For the user it mey be diffic...
-
- "Always-cache" is also used for get capabilities, if the request failed the first time (during the server configurati...
-
- Using the client wcs from last trunk,
I notice that the option "always-cache" don't seem work. It return always a mes... -
- The last considerable change in WCS client was 3 months ago, so I have no idea how it got broken and cured itself in ...
-
> I've really very difficulties to make crashing my QGIS (Linux - 0ca7316), please could you say to me what I should...-
- Paolo Cavallini wrote:
> In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly b... -
- Giovanni Manghi wrote:
> On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and... -
- In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly broken service will not be...
-
- Alvaro Huarte wrote:
> Hi Bernt, I propose this pull request:
> https://github.com/qgis/QGIS/pull/1081
>
> Can you t... -
- Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro -
- Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro -
- The move in wms 1.3.0 to a more strict axis ordering and a changed behaviour from qgis 1.8 to 2.0 is turning into a m...
-
- Yes the lines that appear when you move an object around on the layout to show if they are aligned.
I tested on OSX ... -
- Why not adding a very small portion of the raster?
-
11:42 AM Bug report #9349: QGis Zonal Statistics Plugin NoData included in Calculations
- Could not upload the files due to size limitations
-
- I have an ESRI raster file (w001001.adf) with a NoData value of -32768 and otherwise non-negative data. I have a vect...
-
- At the moment I have a duplicate composer layout as a work around with the alignment image on. I delete the image use...
-
- Yes similar to that item, but not just labels. Would be for objects like images placed and items like lines and other...
-
- Running QGIS master as of 2014-01-15, Postgis 2.1.1, osm2pgsql 0.85.0_20140107
Attached is a screenshot which displa... -
- The same applies to the editing of values in the attribute table.
-
- Then tagging as a regression.
-
- Then tagging as a regression.
-
- Then tagging as a regression.
-
- Then tagging as a regression.
-
- The selection of thousands of points from a 5 million point shapefile takes ages to process and eventually crashes QG...
-
- Confirmed on Linux with QGIS master commit:48afac3
-
- Still cannot confirm. Export takes several seconds.
-
- Summary:
* QGIS was working well, writing RGBA 0,0,0,0 for transparent pixels, but there is a bug in Acroba Reader s... -
- Fixed in changeset commit:"00efc467844fc710e12a4ab7a64b3fc76b133ad2".
-
- For raster artefacts on left / right border I have created new issue #9343.
-
- Fixed in commit:00efc46784.
This bug was caused by first attempts to fix #9101. -
- The artefacts have the same color as RGB part of QgsRasterRenderer::NODATA_COLOR = qRgba( 255, 255, 255, 0 ). It mean...
-
- Artefacts appear within raster extent on the left/right side of no null data and on the left / right side of raster e...
-
08:05 AM Bug report #9317: OTB Band Math error with Processing (sextante) modeler
- Apparently, this problem is only for the QGIS 2 version 64 bits...
-
- Hi,
FastSQLayer allowed adding non geographic query results in QGIS. This is very handy for join/relates, adding sta... -
- Paolo Cavallini wrote:
> If this works in master, it can indeed be closed. Reopen if necessary.
it is not fixed, but... -
- If this works in master, it can indeed be closed. Reopen if necessary.
-
04:53 AM Feature request #9344 (Closed): Queries saving in DBManager
- Wouldn't be nice to have the possibility to store the queries written in DBManager either in the project file OR in Q...
-
03:20 AM Feature request #9340: Bordering polygons dash and dot outline not rendering systematically
- Fair enough. It is possible to achieve that through conversion to lines and removing overlaps. I thought other softwa...
-
- Your wish is understandable but I guess it is hard to fulfill. Polygons are separate shapes so at the common borders ...
-
- Oh, just forgot, shouldn't we add some unit test to avoid such important regressions?
-
- Ok!, BTW all you did in composer is just great in production use!
-
- This was a consequence of the new atlas preview mode. I realise now I've forgotten to take into account the fact that...
-
- solved #10db5770c4c159763f77c972b4ba4b82f02a4b20
2014-01-14
-
- Expressions in text items (like writting current date) are no more evaluated in composer. Expression builder do evalu...
-
- implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83
-
- implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83
-
-
- When using offset for polygon outline it creates overhang of outlines in starting (ending) node of polygon.
-
- When there are adjacent (bordering) polygons with the same dashed/dotted outline in one layer it should be rendered a...
-
- James - is this a duplicate of #4357? Does that match what you're after?
-
- Have a look for a plugin called Layer Combinations. It will allow you to create combinations of layers which you can...
-
- It would be good to have a tick box on each layout composer item for "Do not print" layer. Like setting some layers i...
-
06:23 PM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.
- This is real useful because this is the only way in Qgis to save a geo-referenced image, more exactly to get a world ...
-
- I can confirm the same bug with QGIS 2.0.1 on windows.
-
- I can confirm the same bug with QGIS 2.0.1 on windows.
-
- In the field properties, it is possible to add a Calendar widget, selecting a date/time format. However, the widget o...
-
- the current default for step in the range widget is 0, which seems inappropriate. Please set it at 1
-
- duplicate of #9012 #8998 and probably more
-
- duplicate of #9012 #8998 and probably more
-
- duplicate of #9012 #8998 and probably more
-
- duplicate of #9012 #8998 and probably more
-
02:20 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
- In the print composer, I make a wonderfull layout.
Then I try to export it (the format doesn't matter, the problem e... -
- Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f".
-
- Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f".
-
- The problem can be extended to all datasources containing multi and single objects. If faced it with a shape2postgis ...
2014-01-13
-
12:17 AM Feature request #9330 (Closed): Rotate Rendered Map Canvas
- Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0....
-
-
- Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0....
-
- When adding a custom path to a lib or external application, the path is not saved unless one press Return after havin...
-
- See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html
-
- In case of layers with essentially the same shapes, with different precision, the diff between these layers produces ...
-
- See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html
-
- In case of layers with topological errors, analyses fail, and the user has no clue about the reasons.
I suggest to c... -
- Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
-
- Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
-
- Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
-
- Fixed in changeset commit:"173e1d72a668fcf26366fc64052ed664fefe059b".
-
- Sorry - I don't have a dev environment on Windows. If you put it into master I could test it with the next nightly to...
-
- Can a windows user give a try to https://github.com/qgis/QGIS/pull/1069
I was coding it pretty much in the dark -
- Reopened due to demand on mailing list.
-
- Reopened due to demand on mailing list.
-
- Can you clarify this for me -- what exactly do you mean by inference lines? The snap lines?
-
- In master ( e745b2f ) there seems to be a regression in composer. The inference lines that were shown when moving obj...
-
09:45 AM Bug report #9259: SpatiaLite new column issue
- done #9325
-
- 1. Load any shapefile with say 1 polygon
2. Right-click - save as Spatialite, check Add to canvas
3. After it is done... -
- Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063
-
- Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063
-
- Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063
-
- Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063
-
- Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error... -
- Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error... -
03:42 AM Bug report #9323 (Closed): QGIS Processing Options python error on windows8
- Hello, im a forestry student from Portugal, that started working now with a company and used ArcGIS and IDRISI as SIG...
-
- I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... -
- I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... -
- I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi... -
- Thank you very much, Stéphane
2014-01-12
-
12:31 AM Feature request #8682: Add expressions to diagrams
- This issue can be closed :-)
-
- Alex, please re-open, the osgeo4w pyspatialite package _is_ installed (as stated in description).
-
-
-
- I cannot replicate it anymore on master, I guess it has been fixed.
-
- I cannot replicate it anymore on master, I guess it has been fixed.
-
- Fixed in changeset commit:"d59ab8052287425b98bf7add107e789737ec4c7c".
-
-
04:55 AM Bug report #9254: Vector points style: "outline width" = 0 still show the outline
- Great work, thanks everybody :)
-
- The pull request was merged :-)
https://github.com/qgis/QGIS/pull/1046
2014-01-11
-
- Fixed in changeset commit:"d82a3991a9ebf6066c6b455bf0de04f129677baa".
-
12:04 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
- You have fixed the problem in OSGeo4W. So i assume the solution will also be available in the next standalone QGIS In...
-
- Holger Bischoping wrote:
> Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
> Thanks a lot
Huh? That's unchanged.
-
- Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
Thanks a lot
-
- I suppose the 64bit installer. It's fixed in OSGeo4W now.
-
-
- Are you using the 64bit or the 32bit installer on Windows 64bit?
-
- h1. Context: QGIS - Standalone - Installer
QGIS-Version 2.0.1-Dufour QGIS-Codeversion d94c044
... -
- Thanks Salvatore :)
-
- This should happen (in 2.0.1) only for point layer, with line and polygon layer should be working.
I had fixed this i... -
- OSGeo4W 32bit supports ECW (and MrSID).
-
- OSGeo4W 32bit supports ECW (and MrSID).
-
-
- OSGeo4W 32bit supports ECW now, doesn't ?
-
- Fixed in commit:e4c60ad
-
- Fixed in commit:e4c60ad
-
-
- I think this is not related to the console code, please could you try the latest master code ?
Also could you provide... -
- Fixed in changeset commit:"d04239d70b2e2a00137d85ae4d1f46419388fab8".
-
- Given this rule fragment:...
2014-01-10
-
- tagging this as a regression at least until I will have time to test if is still an issue on QGIS master.
-
- tagging this as a regression at least until I will have time to test if is still an issue on QGIS master.
-
- tagging this as a regression at least until I will have time to test if is still an issue on QGIS master.
-
10:59 AM Bug report #9320 (Closed): Weird behavior when creating columns from a joined table
- Steps to reproduce:
1- Join the layer named 'Joined_Table.csv' to the layer named 'BBS_Routes' using the shared rou... -
- The default copy and assigment operator of QgsExpression causes segfault (multiple delete) if used.
Since the copy a... -
- QGIS allows user to copy\\paste a style where the origin layer style has different geometry type than the destination...
-
- Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Giovanni Manghi wrote:
> > > weird, is still broke here, see attach... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > weird, is still broke here, see attached screencast.
>
> Hi Giovan... -
- Giovanni Manghi wrote:
> weird, is still broke here, see attached screencast.
Hi Giovanni, maybe I've missed somethi... -
- Andrey Isakov wrote:
> +1 for this feature
meantime the SAGA dissolve in the processing toolbox allows to choose up ... -
02:39 AM Feature request #6040: Dissolve should support multiple fields
- +1 for this feature
-
- OTB Band Math used with the Processing modeler doesn't work. According to the log file (see below), it seems that the...
-
-
- If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... -
- If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... -
- If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... -
- If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http... -
- The attached shp has a number of topological errors. The fTools checker (under manu Vector>Gemoetry tools) detects 34...
-
- Matthias Kuhn wrote:
> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a d...
2014-01-09
-
11:57 PM Feature request #9287: Live linked layer styles
- This would be a great feature!
I would add a possibility to link feature styles to styles in style manager.
Styles c... -
- I've noticed a similar latency recently, but in a release build (i.e. without debug output, so Jürgens commits should...
-
- Fixed in changeset commit:"ccde424dc14ebc82c97e62d3568b1cf15f3bfda9".
-
02:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
- This only occurs when Attribute Table is open.
-
- This only occurs when Attribute Table is open.
-
- using OSGeo4W64, 2.1.0-104 while trying to update a field in a large dataset (~300MB) with the Field Calculator ...ve...
-
> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a database perspective ...-
-
- Fixed in https://github.com/qgis/QGIS/pull/1062
-
- When filter contains strings with more than two words, it gets grouped but the individual elements in the token list ...
-
- Not sure it is necessary. I'd put it besides the "invert colour" checkbox.
-
- Added a few people to this ticket, would appreciate feddback on questions raised in last comment.
-
- Actually, implementing "invert palette" shouldn't be too hard.
The question is, where should this option appear? In... -
- Added invert checkbox for vector layer classification (Categorized and Graduated) in 0a8c1ccd090f28efe2706e6f56d8ce28...
-
- Additional condition: The label column should only be adjusted, when it is still unmodified.
-
- Confirmed here.
I have fixed an issue which masked the real issue and led to a memory leak in the categorized render...
2014-01-08
-
- Fixed in changeset commit:"1f9c378c77160f64612391e4e40824b853d59ddd".
Also available in: Atom