Activity
From 2013-06-13 to 2013-07-12
2013-07-12
-
11:43 PM Bug report #6695: Contour extraction doe not consider chosen format
-f format:
create output in a particular format, default is shapefiles.-
05:54 PM Bug report #8276: crashes related to gdal ECW plugin
- BTW, this is on XP.
-
- Yes, the standalone browser.
No, not doing something specific - it happens when I just open it and then close it.
I k... -
04:32 AM Bug report #8276 (Feedback): crashes related to gdal ECW plugin
- Are you referring to the browser standalone application or the browser tool in qgis desktop? I guess is the standalon...
-
04:52 PM Bug report #8286 (Closed): save edits becomes slower until QGIS crashes
- My fault probably a problem created by the plugin "digitizing tool". After disinstalling, always get better.
I'll clo... -
- I cannot replicate the issue, can you attach a sample project and specify the exact steps to replicate and the projec...
-
- save edits commands in editing session becomes slower after about 10-15 "save edits" commands. 3 save more and QGIS C...
-
- I have seen this with a lot different layers, so I attach a sample one.
* take the attached "aa" shape and import it... -
- regis Haubourg wrote:
> Ok thanks, this issue could be solved by an official 64 bit build, discussed today in the lis... -
- This is still an issue (and causing crash) on the latest master revision (tested on a Windows 7 VM with 4gb of ram):
... -
- This is still an issue (and causing crash) on the latest master revision (tested on a Windows 7 VM with 4gb of ram):
... -
- I can confirm the issue on the latest master on Windows 7 (4gb of ram in a VM):
The attached project is made of a ha... -
- I can confirm the issue on the latest master on Windows 7 (4gb of ram in a VM):
The attached project is made of a ha... -
- Minoru Akagi wrote:
> Thank you, Giovanni and Jürgen!
Thank Jürgen, I did nothing :) -
02:55 PM Bug report #8237: Georeferencer:Japanese file name problem
- Thank you, Giovanni and Jürgen!
-
02:22 PM Bug report #8237 (Closed): Georeferencer:Japanese file name problem
- "Pull request !#581":https://github.com/qgis/Quantum-GIS/pull/581 was merged.
-
- "Pull request !#581":https://github.com/qgis/Quantum-GIS/pull/581 was merged.
-
02:28 PM Bug report #8283: Loading QGIS 1.8 color ramp in QGIS 2.0 causes crash
- more info by full backtrace: http://codepad.org/zvJHsbNC
-
- Jürgen Fischer wrote:
> um, doesn't crash here.
no crash here too -
- Hi Jürgen,
did you try with sample data of #7080 ? -
- um, doesn't crash here.
-
- I think this is a duplicate of #7080
-
05:06 AM Bug report #8283 (Closed): Loading QGIS 1.8 color ramp in QGIS 2.0 causes crash
- Loading a raster dataset with a legacy (QGIS 1.8) qml which contains a colour ramp causes QGIS 2.0 to crash.
I've at... -
-
> I can not see those messages but when I try to close the app I get a segfault-
>
> Stacktrace: http://codepad.or... -
- Giovanni Manghi wrote:
> it "works" again on master.
>
> The progress bar does not move, the result is wrong and now... -
02:08 PM Bug report #7244: Split multipolygon geometry fails
- Bug fixed thanks to fundings from Agence de l'Eau Adour-Garonne.
-
- Fixed in changeset commit:"6272274fb5c9df63eaf1c94defc25a7aa8290cf7".
-
- Salvatore Larosa wrote:
> Still persists here with the same stacktrace.
just tested, no crash here -
- also fixed by commit:cafc367
-
- also fixed by commit:cafc367
-
06:15 AM Bug report #8284 (Closed): Can not drag and drop layers to Spatialite in DB Manager
- Running OS X 1.8.3 with nightly build from Dakota Cartographic. The build uses SpatiaLite 4. Drag and drop works very...
-
- Fixed in changeset commit:"cafc3677fdcd4fa999e6b0b609beaaa68d41e8e9".
-
- Hi Alexander, I cannot replicate the issue with the latest master on Windows 7 64 bit, using a bunch of SL vectors. I...
-
- When trying to save a style, nothing happens. No crash, but also nothing saved.
When trying to save as 'sld' format,... -
> Confirmed under Windows, at least for CSV layers added with the "add delimited text" tool.
it is anyway a differe...-
> Confirmed under Windows, at least for CSV layers added with the "add delimited text" tool.
it is anyway a differe...-
> Confirmed under Windows, at least for CSV layers added with the "add delimited text" tool.
it is anyway a differe...-
10:51 AM Bug report #7055 (Closed): All plugins report python error in QGIS 1.9.0 Alpha, rev b16c68e
- Core plugins should have been fixed by now. Please open specific tickets against individual plugins.
-
- Core plugins should have been fixed by now. Please open specific tickets against individual plugins.
-
- Giovanni Manghi wrote:
> Vincent Mora wrote:
> > Is there a reason why the feature is highlighted but not selected by... -
- Vincent Mora wrote:
> Is there a reason why the feature is highlighted but not selected by the tool ?
sorry I don't ... -
- Is there a reason why the feature is highlighted but not selected by the tool ?
Because, if there isn't, the renderi... -
- regis Haubourg wrote:
> Hi, I'm just about to fund some work on this because we have some huge datasets, and this rea... -
- regis Haubourg wrote:
> Hi, I'm just about to fund some work on this because we have some huge datasets, and this rea... -
- regis Haubourg wrote:
> Hi, I'm just about to fund some work on this because we have some huge datasets, and this rea... -
- Vincent Mora wrote:
> I tried with current master in debug on a good laptop (lenovo w530 proc i7) with the dataset ht... -
- I tried with current master in debug on a good laptop (lenovo w530 proc i7) with the dataset httpp://www.faunalia.pt/...
-
- Zane Egginton wrote:
> https://dl.dropboxusercontent.com/u/2192477/hobson_square_edits.mov
> Note: I've speed up port... -
- Zane Egginton wrote:
> https://dl.dropboxusercontent.com/u/2192477/hobson_square_edits.mov
> Note: I've speed up port... -
- Zane Egginton wrote:
> https://dl.dropboxusercontent.com/u/2192477/hobson_square_edits.mov
> Note: I've speed up port... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Do you think is a qgis (wfs) server issue?
>
> Not reproducable h... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > Do you think is a qgis (wfs) server issue?
>
> Not reproducable h... -
- Giovanni Manghi wrote:
> Do you think is a qgis (wfs) server issue?
Not reproducable here. Maybe commit:cb35c894007... -
- sounds like a duplicate of #8242
-
- sounds like a duplicate of #8242
-
02:32 AM Bug report #8282 (Closed): QGis Crashes when a PostGIS Layer is modified (ie in pgAdmin) while it...
- Good morning to all,
I have a project using a postgis layer. When this project is open in QGIs, if I do some changes... - 05:04 AM Bug report #8277 (Closed): Non-positional str.format() arg specifiers break Console for Python 2.6
- Fixed in changeset commit:"272400e30d603e22641292cca57c8fb49bba5b55".
-
04:50 AM Bug report #4604: WFS option "Only request features overlapping the current view extent" disappea...
- This seems to have been missing from 1.8 too. While it would be good to have back there seems to be a lot involved i...
-
- I have qgis master compiled now against gdal 1.10 and it shows only the "name" and "description" fields, while with g...
-
- Paolo Cavallini wrote:
> Apparently it is misclassified, see attached.
confirmed, but it works if you use mode "equa... -
- Apparently it is misclassified, see attached.
-
- Nathan Woodrow wrote:
> Do you have a image. I don't have any issues with colour ramps here.
!https://issues.qgi... -
- Do you have a image. I don't have any issues with colour ramps here.
-
- Apparently the ramp is created well, but is not applied, and the resulting vector or raster is blank.
-
-
03:28 AM Bug report #6525 (Closed): The WFS provider repeats the field with PK
- Sorry,
butI'm no more able to test this. The wfs server is not available.
I guess this is closable if the issue is ... -
- Sorry,
butI'm no more able to test this. The wfs server is not available.
I guess this is closable if the issue is ... -
- BTW, since a crash was observed with a *postgis DB*, I just tryied with 80k and 640k datasets, for the latter it sure...
-
- https://github.com/qgis/Quantum-GIS/pull/720
-
02:16 AM Feature request #8281 (Open): Change the way .gpx and .kml are created
- The creation of both .gpx and .kml files is excessively complex. I suggest changing the behavior of "save as..." to:
...
2013-07-11
-
- So it's n² complexity all right ! (see the attached plot).
I'm going to try and implement the proposed warning. -
- It took a couple hours (more or less, I wasn't waiting in from of the machine) but my 2M records where eventually sor...
-
- Vincent Mora wrote:
> Giovanni: *what do you mean by "freezes"* ? Is it still computing or crashes ?
freezes means ... -
- Giovanni: *what do you mean by "freezes"* ? Is it still computing or crashes ?
I'm trying with a few millions polygo... -
- Sorry for that, it was for #7244. Working on this one right now.
-
- Vincent Mora wrote:
> https://github.com/qgis/Quantum-GIS/pull/717
this patch does not seems related to this ticket :) -
- https://github.com/qgis/Quantum-GIS/pull/717
-
- Vincent Mora wrote:
> Created a SL DB with provided script.
>
> In qgis (today's master 56210eb0b5c),
> - Add Spati... -
- Created a SL DB with provided script.
In qgis (today's master 56210eb0b5c),
- Add SpatiaLite Layer
- Properties->St... -
01:01 AM Bug report #7996 (Closed): Duplicate profiles in raster layer "Save As"
- yep, it seems to have been fixed in trunck, thanks for the notification !
-
- yep, it seems to have been fixed in trunck, thanks for the notification !
-
05:11 PM Bug report #7996: Duplicate profiles in raster layer "Save As"
- I think that bug was not valid anymore. Can you confirm?
I am using master version, on Ubuntu 13.04 and I can't repr... -
- Fixed in changeset commit:"18a04b55f001383597d00a9b1d4b96907da3e634".
-
- The first time when I try to save a vector layer using menu "save as" the option to export as Spatialite exists and w...
-
08:41 PM Bug report #8277 (Closed): Non-positional str.format() arg specifiers break Console for Python 2.6
- Running QGIS with Python 2.6, PyQGIS console throws errors because no positional arg specifier is used for str.format...
-
06:14 PM Bug report #8274: Disappearing data
- https://dl.dropboxusercontent.com/u/2192477/hobson_square_edits.mov
Note: I've speed up portions of this to reduce bo... -
- Could you attach a screen record of it happening please.
-
- Could you attach a screen record of it happening please.
-
- sorry, blue vector = modified data layer, red = original data
and these images are a better resolution.
-
- sorry, blue vector = modified data layer, red = original data
and these images are a better resolution.
-
- First up, I'm new here and new to the software however I'm really impressed with QGIS, well done all!
Ive been editin... -
- When the gdal ECW plugin is installed, QGIS browser crashes on exit:
The instruction at "0x7c93729b" referenced memo... -
- Fixed in changeset commit:"b45b7d6f88d9165cce43a1f6a7573a56bd1d8a0e".
-
03:15 PM Bug report #8273 (Closed): Attributes not loaded from kml/kmz file
- While the attached kmz file will display within QGIS master, none of the attributes are visible. Opening the file in ...
-
- I'm going to fix hopefully before 2.0.
-
- I'm going to fix hopefully before 2.0.
-
08:33 AM Feature request #8270 (Closed): Incremental output in python console
- It would be great if the Python console showed script output as it were produced by the script, rather than waiting u...
-
01:24 PM Bug report #8272 (Rejected): Bad size request with a georeferenced raster
- With some georeferenced rasters (for instance a jpeg file with a .jgw world file), visual artifacts may appear on som...
-
- aperi2007 - wrote:
> The duplicate happen also if the PK is integer type and not only if serial type.
Is this still ... -
- Fixed in changeset commit:"9e5e9484df0cfb37b74aefcad70743afbbdceb8e".
-
- CSS for table headers, rows and columns into info tab are not longer visible in current master.
See image (2.0 vs 1.... -
- Fixed in changeset commit:"fd85aeea954642b1a13acab1d5e624008875ef4a".
-
- Fixed in changeset commit:"bd245ee42dba97bf21f130006c9c1c66564b464c".
-
- Confirmed on Linux. As far as I remember is a regression.
-
- Confirmed on Linux. As far as I remember is a regression.
-
- Confirmed on Linux. As far as I remember is a regression.
-
- https://github.com/qgis/Quantum-GIS/pull/717
-
- Jürgen Fischer wrote:
> The cut edge is the line between the part of the split line between the two polygons. Appare... -
- Here is a minimal test case for the issue.
Note that the split of one of the polygons in a multipolygon works and pr... -
- Here is a minimal test case for the issue.
Note that the split of one of the polygons in a multipolygon works and pr... -
08:33 AM Bug report #8246 (Closed): End markers not always drawn with style "marker line"
- Fixed in 646db83cf048d5d34b8d413c35a8ad2e01aa26db
-
- If it works on qgis master then there is nothing to do, as there are no backports.
If is not working on qgis master ... -
- If it works on qgis master then there is nothing to do, as there are no backports.
If is not working on qgis master ... -
- If it works on qgis master then there is nothing to do, as there are no backports.
If is not working on qgis master ... -
- I ran the following code in the Python console, with a layer selected:...
-
- Jürgen Fischer wrote:
> Fixed in changeset commit:"ac21c62662164156d7e1905303ab9456b208bdd9".
"Save As" is based on ... -
- Fixed in changeset commit:"ac21c62662164156d7e1905303ab9456b208bdd9".
-
- Yes, you are right. If the threshold is set to >0 (which it should always be) no error occurs.
-
- with threshold = 0 the error layer is (should be) empty, so you get the error if using a different value?
-
- With "teste.model" it takes a while to get it to crash. The first 5 or 6 double clicks work fine, but eventually qgis...
-
- I am using version QGis 1.8 Lisboa, under Ubuntu 12.04.
When I try to save a shapefile as spatialite (right click on... -
- does not seems a regression. I see it on 1.8 too.
-
- Thanks. Can reproduce it now.
-
03:21 AM Bug report #8263: Rendering rule-based w/o label
- Mmmh I found how to reproduce it --> It does that when the 'Show feature count' is on.
-
- Strange. I can't seem to reproduce here could you put together a sample project with some test data so we can test.
-
03:07 AM Bug report #8267 (Closed): Line breaks in Metadata Title and Abstract
- When typing abstracts and title (although line breaks not always logic) in the Metadata tab in the layer properties, ...
-
- https://github.com/qgis/Quantum-GIS/pull/715
-
- Sorry for the PR with several commits in it. I'm going to fix that.
I also have a default behaviour with spatialite ...
2013-07-10
-
- With the latest master commit:42d57d6 if you move a node shared by two polygons (with the option topological editing)...
-
- v.clean works correctly with the attached shp (threshold = 0, snap = 0). The cleaned shapefile is added but an error ...
-
- Minoru Akagi wrote:
> I want to tag this issue as blocker if possible, because with QGIS 1.6 (QGIS-OSGeo4W-1.6.0-1461... -
- I want to tag this issue as blocker if possible, because with QGIS 1.6 (QGIS-OSGeo4W-1.6.0-14615-Setup.exe, which can...
-
> I am not sure it is GDAL's issue or QGIS's issue, but I hope it will be fixed as soon as possible, otherwise some ...-
> I am not sure it is GDAL's issue or QGIS's issue, but I hope it will be fixed as soon as possible, otherwise some ...-
- Here is a new patch, along the line of what I proposed earlier: https://github.com/qgis/Quantum-GIS/pull/714
-
- After trying to generate unique primary key values in split, I realized that this is not an easy endeavor. Moreover, ...
-
- The defaultValue is not implemented for SL provider. As a result the pk value of a feature created by split is the sa...
-
-
- Run qgis.bat and not qgis-bin.exe.
-
01:22 PM Bug report #8256 (Closed): QGis from command line
- I try to launch QGis from command line with a string formatted as:
c:\\OSGeo4W\\bin\\qgis-bin.exe --project test_mon... -
- When using a rendering rule-based, if no label defined for the rule, the symbol is incorrect (it takes the first one ...
-
- When editing geometryless tables, the proper icon (a "+" symbol) is available only through the table of attributes, w...
-
- *New description:*
When connecting to a PostGIS server and the password was not saved then it would be good to have ... -
10:54 PM Bug report #8260 (Closed): Point in polygon analysis fails with "TypeError: arguments did not mat...
- I am using QGIS 1.8 on Windows 7 (I've tried 1.8.0-5 and 1.8.0-7)
I want to perform a point in polygon analysis usin... -
09:56 PM Feature request #8259 (Closed): Documentation SAGA GIS in Sextante
- You may change the code of the function helpFile() in file SagaAlgorithm.py:...
-
- Open polygons.shp (testdata on #8219). The second field of the attribute table is a string type and includes NULL val...
-
- Fixed in changeset commit:"56210eb0b5c7914d246b1c82ad48e676b00b6557".
-
- Fixed in changeset commit:"56210eb0b5c7914d246b1c82ad48e676b00b6557".
-
- Sorry about closing the bug...
-
- Fixed in changeset commit:"56210eb0b5c7914d246b1c82ad48e676b00b6557".
- 05:52 PM Bug report #8243 (Closed): joins are not created when duplicating a layer
- Fixed in changeset commit:"9ed180303c8f4172c9c6155e9cb226f79fc734b4".
-
- Replace image selector with new SVG picker dialog.
-
- This has been "fixed" by adding a label to indicate that it isn't a filter. The correct solution is to use the new S...
- 05:02 PM Bug report #7764 (Closed): composer: search directories filter/dropdown (to add images) does not ...
- Fixed in changeset commit:"f5632b68fd124e0d8d9428b038bb03e7290b3d3a".
-
-
- Fixed in changeset commit:"42d57d6f8f5bd9db295e87ed5fc67cede59ba36d".
-
- Fixed in changeset commit:"8284300090f5704949796b86832b1061166dddf3".
-
12:22 PM Bug report #8231: Layer is still visible after un-checking (while canvas is rendering)
- #8096 is the bug for that "All Layers" issue =)
-
- Giovanni Manghi wrote:
> maybe this is somehow related to the fact that also the "show all layers" and "hide all laye... -
- Donovan Cameron wrote:
> Hey Matt.
>
> I checked and don't have render caching enabled on QGIS 1.8.
>
> I'm noticin... -
- Hey Matt.
I checked and don't have render caching enabled on QGIS 1.8.
I'm noticing that if you toggle the visibili... -
07:34 AM Bug report #8231 (Feedback): Layer is still visible after un-checking (while canvas is rendering)
- Do you have render caching enabled (In settings => Options => Rendering)?
It is known to cause such effects. -
- seems meanwhile somewhow it was fixed.
-
- seems meanwhile somewhow it was fixed.
-
- Not reproducable.
-
- If you modify the geometry of a feature (eg move a point) and then change its primary key (with attribute table), the...
-
- Patrick Dunford wrote:
> It is data that has been deleted which becomes undeleted at save and I see it all the time.
... -
- I have been adding and deleting features on a single layer with no duplicate data. If you lock down a process or som...
-
04:01 AM Bug report #7729: Save of edited layer results in duplicated data
- It is data that has been deleted which becomes undeleted at save and I see it all the time.
-
- Closing this for now as I can't reproduce it here.
-
- Closing this for now as I can't reproduce it here.
-
- Fixed in changeset commit:"6f82a8983ace2587ad3ccc81609365b4c6fb34c1".
-
- If the user does not select an appropriate resolution for the resulting raster(s), it risks to get stuck with an exce...
-
- I'm not sure this should be blocker as there is still some missing features from the data defined but we should just ...
2013-07-09
-
- I nathan, at this moment I have commit:d37e03b version on win7, that's the most recent version I can download with OS...
-
- Alessandro, can you do some more testing for us using a new version of master. I can't replicate any data loss or inc...
-
- Jürgen Fischer wrote:
> Should be provider independant and is reproduceable with a multipolygon shape here too.
The ... -
- Should be provider independant and is reproduceable with a multipolygon shape here too.
-
- Carlos Alberto Machicado Cabezas wrote:
> Found a solution focused on the shapelfile data, the problem lies in the ge... -
05:51 PM Bug report #5109 (Reopened): ERROR: Geometry type Poly not match MultiPoly
- Found a solution focused on the shapelfile data, the problem lies in the geometry in this case multipolygon Multipart...
-
- Found a solution focused on the shapelfile data, the problem lies in the geometry in this case multipolygon Multipart...
-
- Found a solution focused on the shapelfile data, the problem lies in the geometry in this case multipolygon Multipart...
-
- Yes it's better to close the ticket only when the pull request is merged. Thanks for fixing this Daniel.
-
-
- Fixed in https://github.com/ddanielvaz/Quantum-GIS/commit/801cde9d9418b8c25a070b8f5bee02cef324e57e
-
- Fixed in https://github.com/ddanielvaz/Quantum-GIS/commit/801cde9d9418b8c25a070b8f5bee02cef324e57e
-
- Nathan Woodrow wrote:
> This works fine for me running the latest master. Not all plugins add themselves to this too... -
- This works fine for me running the latest master. Not all plugins add themselves to this toolbar so it's up to each ...
-
- This works fine for me running the latest master. Not all plugins add themselves to this toolbar so it's up to each ...
-
- The issue #4069 says that plugins should be categorized in appropriated menu. I don't know if that behaviour may be c...
-
11:38 PM Bug report #8246 (Closed): End markers not always drawn with style "marker line"
- In some cases, end markers are not always drawn.
In the attached sample I set both start and end markers. Both start... -
- I mean export with "Save as" (right-click on layer in legend tree).
-
- When exporting from a Postgis table and if the source table contains a column named "ogc_fid" one cannot export the t...
-
- Larry what is your stance on this?
-
06:23 PM Bug report #8194: Heatmap plugin doesn't work for points along highway
- Nyall, what happens when you press *Zoom to Layer* after applying my provided filter to that layer? If it doesn't zoo...
-
- Proposed fix is here:
https://github.com/nyalldawson/Quantum-GIS/commit/8d7a686a86961e1642176d91ad3a883b8b92d3b7
I'm... -
- Nyall was able to replicate the issue. (He told me over email instead of posting here.)
He has a proposed fix, altho... -
- Aren Cambre wrote:
> Got it! Can you email me directly at [email protected]? I'd like discuss transferring the data... -
- Aren Cambre wrote:
> Got it! Can you email me directly at [email protected]? I'd like discuss transferring the data... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"cb1e7d3f6b0864d1b448b52e7ccb49faaad20f63".
Better fix in commit:2... -
- Fixed in https://github.com/ddanielvaz/Quantum-GIS/commit/a7c8b9423880e79f89466dc299a70f28b8cbc233
Please see pull r... -
01:28 PM Bug report #8237: Georeferencer:Japanese file name problem
- This problem is the same as I reported to the GDAL site before.
http://trac.osgeo.org/gdal/ticket/4376
It has not be... -
- The issue is solved, here is the pull request: https://github.com/qgis/Quantum-GIS/pull/708
-
- Vincent Mora wrote:
> So, back to the original plan (generate primary keys for new features) ?
You have to draw a li... -
- Jürgen Fischer wrote:
> only if the column is set to auto_increment - but that's not mandatory. So there could well ... -
- Vincent Mora wrote:
> OK, so I will start by implementing the getPrimaryKey() for the SL provider,
>
> What you say... -
- OK, so I will start by implementing the getPrimaryKey() for the SL provider,
What you say is that if I set the key ... -
- Jürgen Fischer wrote:
> If the spatialite provider reported a @NULL@ value as @defaultValue@ for the primary key colu... -
- Vincent Mora wrote:
> For the moment I'm planning to detect primary keys and add new keys for added features (what is... -
- For the moment I'm planning to detect primary keys and add new keys for added features (what is done in postgres prov...
-
- Olivier Dalang wrote:
> This is critical since after exiting edit mode, even if you discard the changes, you loose on... -
- There is a flaw in QgsVectorLayerEditBuffer::commitChanges IMO: in the case one of the operations (deleteFeature, add...
-
- Here is a simple test to reproduce the problem.
-
12:48 PM Bug report #8221: QGIS Crashes when saving the project and corrupt project file
- Thanks a lot
-
- Fixed in changeset commit:"36bf49de19e91896d72e0a692a06c1377f53e898".
-
- Fixed in changeset commit:"7ccd3d0ab9c008791589d4cd4eedfc56370ea2a8".
-
- Same as Nathan here. I have to commit twice (I think first time to truncate the field name, second to really commit) ...
-
- I can't reproduce here. My field name is truncated but no data loss.
-
11:28 AM Bug report #8244: Plugin manager crashes when adding a repository
- Hi, we switched from simple QHttp requests to QgsNetworkAccessManager (mainly in order to properly support proxies) a...
-
10:45 AM Bug report #8244: Plugin manager crashes when adding a repository
- Thanks Borys, I'm compiling the updated code so I'm sure that'll fix the crash problem. It seems that the 406 error i...
-
- It was a side-effect of the recent change in closing pending requests. Now it's fixed, however, your repository still...
-
- Fixed in changeset commit:"682a89c957650c438d28b721e1633fab4a881466".
-
- Confirmed here too after pulling
from py-bt:... -
- Ok, seems I can replicate the crash.
-
- It seems that I can't add any repositories at the moment. I've tried adding the Sourcepole repo and Carson Farmer's r...
-
- It does not crash here, but I get an error indicating "server replied: Not Acceptable"
-
- I have created an unofficial plugin repository, which was working under 1.8. When I try to add it in master (e689364)...
-
- Hi Jigdo,
Hopefully it will be fixed this week. I have it working, but with some scaling issues. -
09:36 AM Bug report #3975: PDF exports on OSX always convert text to outlines
- This is becoming a serious issue. It is impossible to select an multiline label in a QGIS svg export when using Inks...
-
- Hello,
The problem is back. Trying to install the latest qgis nightly on debian wheezy throws out broken dependencie... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"78b04df91a1b85ee70ff5b326980f480b3069d47".
It was caused by locki... -
- Fixed in changeset commit:"78b04df91a1b85ee70ff5b326980f480b3069d47".
-
- ok, I can reproduce it now. I suspect it's a file locking issue in OGR (might be tied to windows). Looking into GD...
-
- Fixed in changeset commit:"aca3dfaf77a227e95c67a5dabbe67887b30a53fe".
-
- What is the status of this?
-
- Is there anything unique about this dataset? I haven't noticed any problems viewing it. It's just a bunch of points.
-
- Matthias Kuhn wrote:
> There's a hardcoded limit of 1000 allowed errors in QgsVectorFileWriter (qgsvectorfilewriter.c... -
- Why is there a hard coded limit? That is pretty bad design IMO. We should just write what we can and report what we ...
-
- There's a hardcoded limit of 1000 allowed errors in QgsVectorFileWriter (qgsvectorfilewriter.cpp:860).
This could (an... -
- This are my findings:
* exporting large/huge postgis layers works ok: I tested on layers with up to 5 million featur... -
- This are my findings:
* exporting large/huge postgis layers works ok: I tested on layers with up to 5 million featur... -
- This are my findings:
* exporting large/huge postgis layers works ok: I tested on layers with up to 5 million featur... -
- This are my findings:
* exporting large/huge postgis layers works ok: I tested on layers with up to 5 million featur... -
- One other fact: both computers were using the same PostGIS database instance. I.e., the computer that worked was conn...
-
- Aren Cambre wrote:
> OK, I tried it on another computer and couldn't reproduce. So I went back to the original comput... -
- Aren Cambre wrote:
> OK, I tried it on another computer and couldn't reproduce. So I went back to the original comput... -
- Aren Cambre wrote:
> OK, I tried it on another computer and couldn't reproduce. So I went back to the original comput... -
- The joins are not copied when duplicating a layer.
-
- I cannot retitle this ticket, so I list 4 tools using @ftools_utils.checkFieldNameLength()@ instead.
doGeoprocessing... -
- Minoru Akagi wrote:
> Some fTools' processes are sometimes discontinued for the same reason. Especially with "Join at... -
- Some fTools' processes are sometimes discontinued for the same reason. Especially with "Join attributes by location" ...
-
- This is intended behavior now. The feature field list should equal the layer field list and the index should match.
-
- This is intended behavior now. The feature field list should equal the layer field list and the index should match.
-
- it happens also when adding a geometryless postgis table
-
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ...
2013-07-08
-
- on 1.8 it works beautifully.
-
- Add a postgis layer
rename a column (I used DB Manager)
remove the layer -> crash
please notice that after renami... -
- isn't this duplicate of #7927?
The issue seems always the same as
#4821
and/or
#7791
Please reopen if necessary. -
- isn't this duplicate of #7927?
The issue seems always the same as
#4821
and/or
#7791
Please reopen if necessary. -
- isn't this duplicate of #7927?
The issue seems always the same as
#4821
and/or
#7791
Please reopen if necessary. -
10:56 PM Bug report #8240: Exporting PDF Error From Print Composer
- Had more success with my Windows setup. I found that some SVG icons were causing issues. These were icons that were e...
-
- My old MacBook Pro details to compare my Windows Xeon against are OSX 10.6.7 2.5 GHZ Intel Core Duo, 4GB Ram.
I can ... -
- I am on Windows Weekly build 1ad5b7 (QGIS-OSGeo4W-1.9.0-26-Setup.exe 01-Jul-2013 20:10)
Win 7 Pro
Intel Xeon 3.4 GH... -
- The error message could be a little more verbose, but it is right anyway: the output of the geoprocessing tools are s...
-
- The error message could be a little more verbose, but it is right anyway: the output of the geoprocessing tools are s...
-
- The error message could be a little more verbose, but it is right anyway: the output of the geoprocessing tools are s...
-
- The error message could be a little more verbose, but it is right anyway: the output of the geoprocessing tools are s...
-
- The error message could be a little more verbose, but it is right anyway: the output of the geoprocessing tools are s...
-
- Related: #3857
-
- *New description:*
a few tools in the vector menu are unable to cope with attributes with names of > 10 chars. The... -
01:26 AM Bug report #7540: Merge tool bug when a shapefile is loaded multiple times
- Hi !
The behavior changed a little bit but I still get data corruption (with master from yesterday, under Windows 7)... -
> So you can reproduce the problem? Just checking, if I should try harder...
no I can't.
Olivier still true for ...-
- Giovanni Manghi wrote:
> I don't think it causes crash, it causes data corruption.
So you can reproduce the problem?... -
- Fixed in changeset commit:"f2031053878af267ef5fa77b676a7907ede8294d".
-
- Fixed in changeset commit:"83cf4be9f68203c18949e4d548e0b3014ac99839".
-
- > We need other feedbacks !
O also get the crash, you must click on "remove favorite" on the actual folder you added... -
- Hi Matthias,
I did set QGIS_BEBUG=2 and I can see the @mName@ var,
but I don't understand as it might helps !
I not... -
- It runs into a Q_ASSERT in qgsdataitem.cpp:260
If you could adjust the debug output to include messages of level 2, t... -
- Very strange, maybe a Qt issue ?
I don't think it is a local problem as I tried on different machine and I always go... -
- Sorry, I was not able to reproduce it with these steps (right click -> add as favorite -> remove favorite)
I am usin... -
- ...and I can confirm the crash even on Windows XP !
-
- I am able to reproduce it using the right click and
selecting "Add as favourites" and then "Remove favourites" on the... -
- I can't either.
-
- I can't replicate in qgis master.
-
- Adding and removing a folder to favorites makes QGIS to crash.
Stacktrace:... -
-
> there is no 'enable backbuffer' option at all anywhere in the settings that I can find.
there are no backports. -
- Alexander Bruy wrote:
> Fix from commit:487879df52 introduces another problem. When backbuffer enabled and layers loa... -
- Hello,
I am using the QGIS 1.8 debian wheezy build from 'http://qgis.org/debian/ wheezy main' repository, the flicke... -
> I also get column lines showing after I have deleted attributes. I will post this as a new issue.
probably alread...-
- Giovanni Manghi wrote:
> there is the "wrap on text" option, is no good for you?
The image posted 18.png was for th... -
- There is a pull request to fix this issue: https://github.com/qgis/Quantum-GIS/pull/581
-
05:55 AM Bug report #8237 (Closed): Georeferencer:Japanese file name problem
- Could I report GDAL georeferencer problem here?
Error occurs, when we use Japanese file name to output file name.
Th... -
03:20 PM Bug report #6192 (Closed): Globe plugin brings QGIS to its knees
- Fixed in changeset commit:"a3be02a4925bc3a5a62d9ad85660a7c613794cfc".
-
02:08 PM Bug report #7877: Crash when saving .qml style file for layer
- Hi Giovanni.
I updated my Win7 copy to latest master this afternoon, checked again, didn't work. All my files are sav... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Simon Dedman wrote:
> Tentative reopening, not sure if this should be a new bug, but:
> When trying to save a style, ... -
- Tentative reopening, not sure if this should be a new bug, but:
When trying to save a style, nothing happens. No cras... -
- Fixed in changeset commit:"bf1d1b0453ba5bc274cc3a960a2cb6de4e061ee4".
-
- I think that bug was fixed in "GDAL !#4509":http://trac.osgeo.org/gdal/ticket/4509
-
- In the new API SAGA GIS v2.1 has changed overlapping polygons, now the "Polygons Intersects" function is divided int...
-
- Fixed in changeset commit:"abd7533fcad0e685c63ec59cd756f299f8916ac6".
-
- Just tested a 50k polygon layer, double precision column, values between 0 and 1, natural breaks, no crash.
Please t... -
- I'd like a dataset to reproduce the bug.
-
- Etienne Tourigny wrote:
> supported file filters should be updated with a more flexible mechanism, and perhaps allows... -
09:32 AM Feature request #8220: Add XLS and KMZ in Ogr supported file filter AND browser
- supported file filters should be updated with a more flexible mechanism, and perhaps allows all supported files to be...
-
- rcline - wrote:
> Only able to test with OS X.
then please share a project (and data) to allow us try in other OSes. -
- Only able to test with OS X.
-
- Fixed in changeset commit:"c735d1a068b83c979de7138f6a35f884066b013d".
-
- I can reproduce here and I guess it is a Browser issue.
Stacktrace on the crash:... -
-
- Is this a bug or a feature?
Before each feature had a map of attribute values with the attributes field index and it... -
- I can confirm that the problem is there with SL and not there with PostGIS.
-
- Jürgen Fischer wrote:
> lenny is oldoldstable. And if upgrading to Qt 4.7 helps, this might be a Qt problem after al... -
- Jürgen Fischer wrote:
> lenny is oldoldstable. And if upgrading to Qt 4.7 helps, this might be a Qt problem after al... -
- Jürgen Fischer wrote:
> lenny is oldoldstable. And if upgrading to Qt 4.7 helps, this might be a Qt problem after al... -
- Fixed in changeset commit:"c5e110d8f5c84f9c67ef7036f18859ff939c4604".
-
- Tested QGIS d37e03b installed from OSGeo4W.
- Open ESRI Shapefile
- Put over 10byte character in field calculator's ... -
- not reproducable here - anything special about the table you want to save?
2013-07-07
-
- Corrected by commit:a4fb5c7cedc991c49c36d6e2597bee217d84fc10
-
- During edits, if choosing crosses as markers, vertices are marked in red, errors in green. This is counterintuitive, ...
-
- OK, I tried it on another computer and couldn't reproduce. So I went back to the original computer, removed the insta...
-
- OK, I tried it on another computer and couldn't reproduce. So I went back to the original computer, removed the insta...
-
- Reproducable with GDAL 1.9, but not 1.10.
-
- apparently a GDAL/OGR problem:...
-
- The main cause is underlying c++ code. The following code attached shows the bug in c++
-
- This bug was found while attempt to solve the bug #8219.
-
- If there are NULL values in field of a shapefile, the python Qgis API method ...
-
- Fixed in changeset commit:"a39b5ab2fad15910a9abec7f9aa44b016928d86e".
-
08:23 AM Bug report #8233 (Closed): QGIS comes to focus when it shouldn't
- Sometimes, when QGIS is running in the background or minimized, it comes into focus. The following is the message log...
-
- I understand now why it works this way, but I don't see the real usefulness. It is rather un-intuitive, I was honest...
2013-07-06
-
- Aren Cambre wrote:
> I have a SQL dump of the PostGIS datasource handy, so I can share it with you. Please email me a... -
- Aren Cambre wrote:
> I have a SQL dump of the PostGIS datasource handy, so I can share it with you. Please email me a... -
- kosuke ASAHI wrote:
> QGIS code version d37e03b from OSGeo4W, we still have same problem.
but it's still a duplicate... -
10:06 PM Bug report #8186 (Reopened): Fail to make spatial index for shapefile, with Japanese string in t...
- QGIS code version d37e03b from OSGeo4W, we still have same problem.
-
- If I uncheck a layer to stop it from being visible while the canvas is rendering, it doesn't actually turn it off.
Z... -
-
- This is fixed in current master. Reopen if needed.
-
- I installed the latest dev from [Dakota Carto[http://qgis.dakotacarto.com/]] QGIS code revision: 7587972.
*Info abou... -
- I commented the line ...
-
- The attribute table of the attached dataset has three fields. "id" and "name" are string type fields. "nvertex" is in...
-
- Please, attach the dataset you are using.
-
- sorry, I can't reproduce with these steps. master 7d273b1eed
-
10:15 AM Bug report #8212: style manager searching finds non-related elements
- I think there is a misunderstanding between *search*ing and *filter*ing here. The query is run over the entire XML de...
-
- See pull request 702. https://github.com/qgis/Quantum-GIS/pull/702
-
- Fixing bug in pull request 702.
Plase see: https://github.com/qgis/Quantum-GIS/pull/702
PS: sorry for previous noise. -
- see attached image. Testes on master.
2013-07-05
-
- The reason of the error "'QPyNullVariant' object has no attribute 'strip'" is that there are NULL values in the field...
-
12:39 AM Bug report #7267 (Closed): loss of attributes during split feature operation
- Fixed in commit:0f578a460.
-
- Fixed in commit:0f578a460.
-
- Fixed in changeset commit:"0f578a46062ec74139066891f63d693d308f2f1e".
-
- We should provide a way (in settings) to export the current settings so they can be exported to another machine or ba...
-
- Just reproduced on a different Windows 7 x64 machine with d37e03b.
-
- I have a SQL dump of the PostGIS datasource handy, so I can share it with you. Please email me at [email protected]...
-
- Aren Cambre wrote:
> Do you have any "point" datasets with where you can filter to a small area?
any point layer, o... -
- I have a SQL dump of the PostGIS datasource handy, so I can share it with you. Please email me at [email protected]...
-
- Daniel Vaz wrote:
> Adding the following two lines before the while loop.
>
> [...]
Probably you are using 1.8 and ... -
- Please, see issue #7073.
There is a hack that solves the problem (for simplest case tested for me).
Adding the foll... -
- Got it! Can you email me directly at [email protected]? I'd like discuss transferring the data outside this issue.
-
- Aren Cambre wrote:
> Well, this is weird.
>
> I've modified my dataset by combining 3 similar ones and reducing the ... -
- Well, this is weird.
I've modified my dataset by combining 3 similar ones and reducing the number of columns. So ins... -
- Fixed in changeset commit:"4538cf1593a22c1aba998abfc6f3c730b0943a71".
-
- Cannoy replicate on QGIS master. Are you on 1.8 or master?
-
05:35 AM Bug report #8224 (Closed): QGIS closes when selecting the 'about' option in the help menu
- When clicking on 'about' in the help menu, QGIS closes without any error message or warning
-
- Are you on QGIS 1.8 or master? I can't replicate any of the above on master. If you are on master please provide a sa...
-
- Printing to pdf with the print composer in QGIS master gives the following problems:
* If using symbol fills compose... -
- Partially fixed in commit:d37e03be4f : plugins should use the same icon in the manager and the toolbars now.
I haven... -
- There not much more left to do for qgis 1.8, please try QGIS master and report back if the issue persist. Thanks.
-
- There not much more left to do for qgis 1.8, please try QGIS master and report back if the issue persist. Thanks.
-
- There not much more left to do for qgis 1.8, please try QGIS master and report back if the issue persist. Thanks.
-
04:36 AM Bug report #8222 (Closed): Error after closing "Check geometry validity" dailog window
- After completing analysis, every time error occurs while trying to close dialog window.
---------------------------... -
- The hack that solves the problem, is added the following two lines before the while loop....
-
- When lines are in the same layer, I think that there is a problem using the same provider to iterate over both lines....
-
- Here, this bug don't occurs when saving only one file. When the user is using atlas, it is prompted where will the di...
-
- Fixed in changeset commit:"7587972293b0a754c358e41980bab7846009239f".
-
06:42 AM Bug report #8225 (Closed): Map position jumps on first mouse click after manually entering map co...
- When manually entering map coordinates in the coordinate field the map is centered correctly on this position. But wh...
-
- Sorry, I am using QGis version 1.8 on Ubuntu 12.04 and after I recompile under gdal 1.9 the option works fine. Thanks...
-
> Pedro Venâncio wrote:
> > 1) If you click on some of the errors in the list, when you make "New project", the last...-
- rcline - wrote:
> Using Print in the toolbar and either going directly to a printer or going to the PDF driver in Mac... -
02:40 AM Bug report #7927 (Closed): composer fails to export with high dpi, without any message
- Ok thanks, this issue could be solved by an official 64 bit build, discussed today in the lists.
I think issue can b... -
- *Version* QGIS master version b7d7076
*Issue* : With an existing opened project, when you load a layer from the brow... -
- I cannot replicate the issue anynmore, so seems really fixed! thanks!
-
- I cannot replicate the issue anynmore, so seems really fixed! thanks!
2013-07-04
-
- Matthias Kuhn wrote:
> Is this bugreport still valid after #7021 has been fixed?
yes, because the result layer is em... -
- Without feature selection, the following error was logged....
-
- In addition, it is necessary to check "Use only selected features" to replicate this error.
-
- When I used "Convex hull(s)" tool with "Create convex hulls based on input field" option selected, the following erro...
-
- Etienne Tourigny wrote:
> the following patch resolves the issue. Tested and matches item names as well as tags.
Hi,... -
01:36 AM Bug report #7927: composer fails to export with high dpi, without any message
- You can specify a different value for heap/stack size, large data flags (see http://msdn.microsoft.com/en-us/library/...
-
- Why building QGIS from source could solve this?
-
- The problem is that QT (4.8 or 5.0) does not raise any error if it can't create the image export. It just returns a N...
-
- duplicate of #5501
-
- duplicate of #5501
-
- If I have 3 layers I want to union, I have to run the *Union* tool (*Vector* > *Geoprocessing Tools* > *Union*) multi...
-
- Hi,
User here are a bit lost when having to open xls files, just because ogr file filters don't mention it, and beca... -
- When I used "Line Intersection" tool, I got the following error message....
-
- To not have to visualize yet another selection:
* Let's add another icon "advanced copy"
* Offer the user a dialog t... -
- I don't want to copy the whole row. Only a single attribute.
-
- Selecting rows, clicking "ctrl+c" or the icon copy the values and an extra row on top with the attribute names. The o...
-
- The attribute table should have a selection of tools which all for copying the data from the selected rows.
These co... -
-
- This issue has already been fixed in GDAL. With GDAL 1.10, we will be able to open xls files that include non-ascii c...
-
- No problem with master, so I'm closing this. Please reopen if necessary.
-
- The *Add PostGIS Tables* dialog takes far too long to be ready. Part of my problem is that I have several views, so i...
-
- I am using a datasource that shows events along roadways. Doesn't matter what filter I apply, the zoom extent for *Zo...
-
-
- Daniel Vaz wrote:
> GDAL ticket was concluded. I suggest to reopen and fix that bug.
There's no bug - QGIS supports ... -
- Daniel Vaz wrote:
> GDAL ticket was concluded. I suggest to reopen and fix that bug.
There's no bug - QGIS supports ... -
- Daniel Vaz wrote:
> GDAL ticket was concluded. I suggest to reopen and fix that bug.
There's no bug - QGIS supports ... -
- GDAL ticket was concluded. I suggest to reopen and fix that bug.
-
- GDAL ticket was concluded. I suggest to reopen and fix that bug.
-
- GDAL ticket was concluded. I suggest to reopen and fix that bug.
-
- GDAL ticket was concluded. I suggest to reopen and fix that bug.
-
- GDAL ticket was concluded. I suggest to reopen and fix that bug.
-
- When snap to grid is enabled, changing grid spacing and selection tolerance don't seem to change placement behaviour ...
-
- Can you give me the steps for that.
-
- Patrick, would you be able to generate a backtrace or crashdump?
This would help a lot for getting an idea for where ... -
- Fixed in changeset commit:"e53aa07698323c0a65d9071c35815ed0eedc72a2".
-
- Fixed in changeset commit:"e53aa07698323c0a65d9071c35815ed0eedc72a2".
-
- #8102 is "fixed" (Python GC is not run on exit for older affected SIP versions)
Can you check if this issue is also s... -
- When exporting from a print template to PDF, resulting files are overwritten without asking. See also #4024
Warning:...
2013-07-03
-
- Using Print in the toolbar and either going directly to a printer or going to the PDF driver in Mac print dialog give...
-
- Hmm... still can't reproduce this unfortunately. It may be an OSX specific issue...
Just to confirm, which method ar... -
- If Print as raster is checked in the Composition tab, any project will produce the error including having only a sing...
-
- If Print as raster is checked in the Composition tab, any project will produce the error including having only a sing...
-
- If Print as raster is checked in the Composition tab, any project will produce the error including having only a sing...
-
02:39 PM Bug report #8102: Qgis Crash on exit
- Hi Matthias,
I no longer have the crash. I think I can confirm the fix!
Thank you very much! -
- Fixed in changeset commit:"f3e08b521f8053056bb7accb6dc46582e0a2c05a".
-
- One of the following package updates solves the problem, if I downgrade I get the crash also:
PyQt4-4.9.5 => PyQt4-4... -
- Thanks. I guess what I am looking for is a glanceable display that doesn't require (painful) analysis of log files. J...
-
- the following patch resolves the issue. Tested and matches item names as well as tags.
Can Arun please review it? I ... -
- the following patch resolves the issue. Tested and matches item names as well as tags.
Can Arun please review it? I ... -
- When entering specific and short string in the search box, incorrect elements are found.
For example, when selectin... -
- Fixed in changeset commit:"d2b2bb18699c49a7eddfdd7644933e3e82cd42ea".
-
05:21 AM Bug report #8207 (Closed): Gdal rasterize readthedocs page link broken
- fixed
-
- I think it should be http://www.gdal.org/gdal_rasterize.html instead of http://www.gdal.org/gdal-rasterize.html
I wi...
2013-07-02
-
- Also interesting:...
-
- I tracked down the issue in the ZoomToCoordinates plugin:
The issue is related to creating a QMainWindow in __init__... -
- http://qt-project.org/doc/qt-4.8/qcombobox.html#completer
-
- Is this bugreport still valid after #7021 has been fixed?
-
- Fixed in changeset commit:"7d75fcc38778cf0e1bb005124e69b4e30dd49821".
-
- Fixed in changeset commit:"7d75fcc38778cf0e1bb005124e69b4e30dd49821".
-
- Fixed in changeset commit:"7d75fcc38778cf0e1bb005124e69b4e30dd49821".
-
- Matthias Kuhn wrote:
> Fixed in changeset commit:"ce1a9a821db2c494cfbd6ed12a658a47d4c587e3".
>
> Please verify, the f... -
- Fixed in changeset commit:"ce1a9a821db2c494cfbd6ed12a658a47d4c587e3".
Please verify, the fix was implemented based o... -
- Salvatore Larosa wrote:
> is this a duplicate of #7845 ?
no, are separate issues, I changed the titles now. -
- I can't replicate this - can you please share some more details (preferably if you can share your project file here s...
-
- If print as raster is selected and set to 72 dpi, then the map is scaled correctly but quality is poor. As the dpi is...
-
- I went across a bug in print composition.
Create a map, with a scale of 50000.
Enable a grid (1000m x 1000m), and ma... -
- More comments in GDAL list:
http://lists.osgeo.org/pipermail/gdal-dev/2013-June/036545.html -
- I am not sure if this may be considered a WFS Client issue.
I think it is a QGIS Server issue. WFS-T created with QGI... -
- using shp file has worked here:
http://lrssvt.ns0.it/cgi-bin/qgis_mapserv.fcgi?map=/home/sam/Scaricati/linien/test2_... -
- update and delete now works, adding still does not.
-
- Hopefully a small problem:
the manual here: http://qgis.readthedocs.org/en/latest/docs/user_manual/plugins/plugins_g... -
> following the above steps I did not get any crash !
> tested with a polygon layer and I do not see unusual behavio...-
- The problem is, that the postgres provider assigns -1 / 0 to field size / field precision differently that they are a...
-
- I can reproduce it now. I don't know what the problem was before.
-
- I just checked it again on my computer (see #6723-8)
Well it crashed again. -
03:04 AM Bug report #6302 (Closed): QGIS WFS Server Geometry Type not recognize by ArcGIS
2013-07-01
-
- Hi, I'm just about to fund some work on this because we have some huge datasets, and this really is a blocker.
PLeas... -
- identify on the attached sample data is very slow but works as expected, no error message here !
and is it correct t... -
- Hi,
sorry I probably missed something, I thought error message was raised on QGIS side to prevent possible error on ... -
- Sorry, but a "Continue" button won't do anything. We cannot presently rewrite QT source code (even if it would be use...
-
- Hi, tested today, and i could export 220 dpi - A1 with no problem. A1 - 300 dpi raised a message (see attached screen...
-
- The problem is not QGIS but QT ! Presently, exporting an image goes throught QT's memory checks, which depends on the...
-
- This is too bad.
It really is a problem in day to day work. It is the part of the core of the GIS work to have table... -
- It seems that the colors change, when the (attribute table) window get or looses focus. It therefore is not a QGIS is...
-
- On QGIS master in Windows I have the issue that the selected rows
(when I select the features in the map) in the tabl... -
- When I tried to total the attribute values of points in each polygon with "join attributes by location" tool, I got t...
-
-
- confirmed on Linux.
backtrace: http://codepad.org/aebehHO2 -
- is it still true ?
following the above steps I did not get any crash !
tested with a polygon layer and I do not see ... -
- more info:
maybe backtrace with locals variables helps: http://codepad.org/iiWFniqY -
- Just tested with the latest master (df398a1) and I can confirm it !
-
- I can not reproduce it here, tested on Linux and Windows XP.
Please do you check if this may be closed ? -
- Hi Aren,
Such a panel already exists: Log Messages.
Currently, it gives good information on a variety of items, but... -
- Same here: http://lrssvt.ns0.it/img/label_font_wms.gif
-
- I am unable to debug the crash to provide additional info because
I am getting the #8102 crash, but my colleague get... -
- is this a duplicate of #7845 ?
-
- I didn't noticed such implications.
-
- I think this should be considered as blocker.
on 1.8 the creating and deleting (Table and Schema) works properly but... -
- does not seems that it is a huge priority, even if is a small regression.
-
- in master it refresh when creating, not deleting
-
- Yes, and it might be nice to provide a one command line to send to users to change the repo address.
-
- Just be aware that everyone will have to update thier git repes to point to the changed name.
-
- To be coherent, github repo should be renamed from Quantum-GIS to QGIS before 2.0 release.
-
- duplicate of #7856
-
- duplicate of #7856
-
- Salvatore Larosa wrote:
> it seems to work fine at the moment with the latest master.
> (or at the least I am seeing ... -
- Salvatore Larosa wrote:
> it seems to work fine at the moment with the latest master.
> (or at the least I am seeing ... -
- Matthias Kuhn wrote:
> Would you be able to debug the crash in gdb and then enter "py-bt" in the gdb console?
> I hop... -
- Would you be able to debug the crash in gdb and then enter "py-bt" in the gdb console?
I hope this gives valuable add...
2013-06-30
-
01:15 AM Feature request #8201 (Closed): Enhance disabling/enabling toolbars (and panels)
- With a lot of plugins installed, the number of toolbars and panels soon reach a confusing stage where users would lik...
-
- In the the latest master revisions the plugins toolbar is completely empty. The plugins that is supposed to show in t...
-
-
- yes, it is fixed.
-
- Fixed in changeset commit:"4240807cbede9c173f4ce4bfa1d920e4f0d91606".
-
- it "works" again on master.
The progress bar does not move, the result is wrong and now the log is full of... -
- it seems to work fine at the moment with the latest master.
(or at the least I am seeing the same behavior of 1.8)
C... -
> 1) If you click on some of the errors in the list, when you make "New project", the last error that was clicked, d...-
> 1) If you click on some of the errors in the list, when you make "New project", the last error that was clicked, d...-
- Fixed in changeset commit:"1ad59b798e20dfe8b75f784cdf7a0d23a714aa3c".
-
- I am unable to reproduce. I don't see any message error using gdalinfo tool. (Linux)
so, IMHO this is not a blocker i... -
- confirmed here !
-
- Fixed in changeset commit:"92b930ac4712975ab93825173a6799081cacfe8a".
-
- duplicate of #7377
-
- duplicate of #7377
-
12:23 PM Bug report #7370: QGIS 1.8 crashes when attempting to specify CRS
- Sandro, Giovanni,
as I understood, no, Charles thanked me for the solution that involved editing registry. But the p... -
- Fixed in changeset commit:"dcdcd12c721c1126be707ebe07149b41a1c95603".
-
- Salvatore Larosa wrote:
> With latest master only OWS doesn't fetch, in WFS I can see the layers.
confirmed, the WFS... -
-
- seems a 3rd party tool and the author prefers use the tracker on github rather then this, so you must file the ticket...
-
- seems a 3rd party tool and the author prefers use the tracker on github rather then this, so you must file the ticket...
-
- it is a core or 3rd party plugin?
-
11:25 AM Bug report #8199 (Closed): raster interpolation bug
- An error has occured while executing Python code:...
-
- Salvatore Larosa wrote:
> well, but I still don't understand the reason why this issue is a blocker for PostGIS provi... -
- well, but I still don't understand the reason why this issue is a blocker for PostGIS provider too.
Also on 1.8 I get... -
- >
> ah, I only see the following message:
yes, this message is about this ticket (splitting the parts of a multipar... -
- Giovanni Manghi wrote:
> it is still true, you must try split both parts of a multipart feature. Splitting of SL laye... -
- Salvatore Larosa wrote:
> I cannot reproduce with PostGIS layer ! (spatialite not tested yet)
> I tried it with a mul... -
- Salvatore Larosa wrote:
> I cannot reproduce with PostGIS layer ! (spatialite not tested yet)
> I tried it with a mul... -
- Salvatore Larosa wrote:
> I cannot reproduce with PostGIS layer ! (spatialite not tested yet)
> I tried it with a mul... -
- I cannot reproduce with PostGIS layer ! (spatialite not tested yet)
I tried it with a multipolygon features.
My test... -
- Hi,
Here the problem is also not dependent of plugins.
QGIS compiled against Qt 4.8.1 and Python-Qt 4.9.1. -
- Salvatore Larosa wrote:
> Hi Giovanni,
> please could you provide any stacktrace for the crash ?
>
> might this be r... -
- Fixed in changeset commit:"a40364866ea41cd6b4cfed5064d2004eee2fa921".
-
- Still confirmed here
removing the layer as suggested by Paolo the prj is loaded properly !
Stacktrace:... -
- Thanks Jürgen for having fixed this.
Just one more thing odd, if you use the identify tool onto France geometry the ... -
- Fixed in changeset commit:"f3d79a88398f4c28e0377ddfb95d5c0a4abcc2bb".
-
-
> delete and update operations work properly both master and 1.8.
I tested also 1.8, and now oddly it fails (all k... -
- Salvatore Larosa wrote:
> just tried on Lisboa and I got the same error !
>
> my testcase is with http://lrssvt.ns0.... -
07:51 AM Bug report #7704 (Closed): Only one geometry type can be loaded from tables with multiple geometr...
- Fixed in master
-
- Fixed in master
-
- Jürgen Fischer wrote:
> Salvatore Larosa wrote:
> > I always get:
> > [...]
> >
> > both master and 1.8
>
> seems l... -
- Salvatore Larosa wrote:
> I always get:
> [...]
>
> both master and 1.8
seems like a server problem to me, too.
-
- Fixed in changeset commit:"1e0b9c217d007cee05e405d145b057206f58f4fb".
2013-06-29
-
- Chris Berkhout wrote:
> Yes, I got mixed up with the versions. Sorry, 1.8.0 has the disappearing fields, master has j... -
- Chris Berkhout wrote:
> Yes, I got mixed up with the versions. Sorry, 1.8.0 has the disappearing fields, master has j... -
10:13 PM Bug report #8106 (Closed): Ftools - Nearest Neighbour does not work
- I've just verified it working fine here. Closing, please re-open if issue is others have different observations.
-
- I see, the reason why I didn't see it is because I wasn't relying on a qgis layer, I was selecting a raster via file ...
-
- Big thanks for this one.
-
- Fixed in changeset commit:"71759760cff1c7dc01476a59da78f2e8becc1f5a".
-
- commit:fe9b8d4672 fixes the crash, but there's still something wrong with the GML (not yet figured out if it's the ge...
-
- confirmed here
stacktrace:... -
- I always get:...
-
- With latest master only OWS doesn't fetch, in WFS I can see the layers.
-
- just tried on Lisboa and I got the same error !
my testcase is with http://lrssvt.ns0.it/cgi-bin/wfs_catasto/qgis_ma... -
- Confirmed here with the same error!
-
- I can not reproduce it !
Please, could you ri-check with the latest master ? -
- Hi Giovanni,
please could you provide any stacktrace for the crash ?
might this be related to #8102 ?
here on exit ... -
- Fixed in changeset commit:"b697371834cf5958ada8d17d06af7aef6fb51b06".
-
- in the log shows...
-
- Fixed in changeset commit:"4a37805a80392e2ec5c99ab7e1082ada7ff7c8cf".
-
- Jürgen Fischer wrote:
> Always?
yes, see attached screencast
-
-
- Jürgen Fischer wrote:
> Another approach - try again please.
I am now able to install msvcrt-1.0.1-8 in both account... -
- Jürgen Fischer wrote:
> Minoru Akagi wrote:
> > I just sent it to you via e-mail.
>
> From another run without insta... -
- Minoru Akagi wrote:
> I just sent it to you via e-mail.
From another run without installing @msvcrt@? -
- I just sent it to you via e-mail.
msvcrt-1.0.1-8\\etc\\postinstall\\msvcrt.bat has the following lines. TEMP include... -
- Minoru Akagi wrote:
> Jürgen Fischer wrote:
> > Retry please (remove the previously downloaded file first) and check ... -
- Jürgen Fischer wrote:
> Retry please (remove the previously downloaded file first) and check @OSGeo4W/var/log/setup.l... -
- Minoru Akagi wrote:
> Jürgen Fischer wrote:
> > Right, this is a OSGeo4W issue. Try @osgeo4w-setup.exe -t@, which w... -
- Jürgen Fischer wrote:
> Right, this is a OSGeo4W issue. Try @osgeo4w-setup.exe -t@, which will install @msvcrt-1.0.... -
- Right, this is a OSGeo4W issue. Try @osgeo4w-setup.exe -t@, which will install @msvcrt-1.0.1-8@ and see if that helps.
-
- It works as expected here.
What datasource are you using? I tested shapes and postgis on qgis/master on Linux. -
- Aren Cambre wrote:
> Would you take an SQL export of a PostGIS 2.0/Postgres 9.2 table?
yes thanks, so we can test al... -
- Would you take an SQL export of a PostGIS 2.0/Postgres 9.2 table?
-
- It's a PostGIS layer, but QGIS won't let me export it due to #8101.
-
- Fixed in changeset commit:"376c5f3a4720b408dfc7d5fa501e2f4ddcb65994".
-
-
- Matthias Kuhn wrote:
> Unable to reproduce using the field calculator. Can you provide more detailed instructions ple... -
- Fixed in changeset commit:"0ebf28aa15b059ec7572ebdbe453c80eb571fda6".
-
- Fixed in changeset commit:"49e5c8f89bb49f3c492ea8c3ea2e4f7bfe1e9dfc".
-
2013-06-28
-
- Always? Not reproducable here.
-
- This would be an issue to be discussed at OSGeo4W, but as I don't know the details, I report the result of testing he...
-
- When I try to install QGIS (v1.7.4, v1.8 and the newest dev-version 1.9) with a Japanese Windows' user name (2byte), ...
-
- Can you share the source layer you are using for this?
-
- I closed qgis, removed the .qgis2 directory, and started it back up. The heatmap started working again at default set...
-
- I have a highway with a lot of points on it that represent crashes; this is actually a point layer with a filter.
Th... -
- It's not really low as Martin is planning to work on it after 2.0.
-
- I'm surprised this remains low priority. This would be a huge benefit for complex maps.
-
- Please give us a panel that shows load times and other relevant diagnostic information, at a glance, for layers. It's...
-
- The Heatmap plugin is the only item in the *Heatmap* submenu of *Raster*. Submenus should not be used if there is onl...
-
- In the *Heatmap Plugin* dialog, if you check *Advanced* then alternately click in the *Rows* and *Columns* fields, th...
-
- I have a point layer with a filter applied. If I use the *Zoom to Layer* feature with that layer selected, it zooms a...
-
- That fixed it. Thanks. Set to closed.
-
- Can you try and confirm if the following change leads to the expected result:...
-
- Are you sure your DB Manager is upgraded?
-
- This worked prior to the SIP changes. When I click on the triangle to display the schemas and tables in our PostgreSQ...
-
- Unable to reproduce using the field calculator. Can you provide more detailed instructions please.
-
06:42 AM Bug report #8183: GRASS plugin cannot locate qgis.g.info
- The given patch *DOES NOT* solve the given issue :-( The given patch is for issue #7269
-
- Changing to blocker. We need to decide on a (single) updated logo before we release.
-
05:51 AM Feature request #8190 (Open): Add scan on demand to database providers
- Scanning huge database (with several schemas) takes too much time.
Is it possible to only list all schema in the UI a... -
- Hiroyuki Kobayashi wrote:
> pleae tell me how to confirm my report.
with usernames with characters like ã ê ó ò etc ... -
- Install qgis-dev with OSGeo4W Installer, and then run qgis-dev.bat under a user account with Japanese name. You can a...
-
02:22 AM Bug report #8189: Linear (Affine?) option always outputs (and applies) a 0 translation
- TTC2770v2_0_6geootbrot.tif is the rotated tif used for the test
https://dl.dropboxusercontent.com/u/3180464/TTC2770v2... -
- The Linear option in the Raster Georeferencing plugin is always calculating a 0 for the Rotatio. I attach a clear exa...
-
02:17 AM Feature request #5981 (Closed): Make "gis" icon set default
-
02:05 AM Bug report #8165 (Open): gdaltools "info" does not work until you change a option
2013-06-27
-
- Giuseppe Sucameli wrote:
> Unable to reproduce the Info tool's problem on my Ubuntu 12.10.
as you can seen in the at... -
- Giuseppe Sucameli wrote:
> Unable to reproduce the Info tool's problem on my Ubuntu 12.10.
as you can seen in the at... -
- Giuseppe Sucameli wrote:
> Unable to reproduce the Info tool's problem on my Ubuntu 12.10.
as you can seen in the at... -
- rcline - wrote:
> I get the following QString error on OS X 10.8.3 with latest nightly build from Dakaota Cartography... -
- Unable to reproduce the Info tool's problem on my Ubuntu 12.10.
-
- zirneklitis - wrote:
> Supplemented files used for RPM packing.
Would you mind submit the patch as pull request on g... -
- zirneklitis - wrote:
> Supplemented files used for RPM packing.
Would you mind submit the patch as pull request on g... -
- Supplemented files used for RPM packing.
-
- Supplemented files used for RPM packing.
-
- Supplemented files used for RPM packing.
-
- Self compiled QGIS Master.
OS: Fedora 18 x 64
The GRASS plug-in is compiled without errors.
The plug-in allows to op... -
- Initialisation of qgis.db from server is added in e00f0c006f8aca18d4d51f66c5245ee53e95bbb8.
-
- Initializing qis.db in the server sounds reasonable to me. What about moving QgisApp::createDB() to core (e.g. static...
-
- reopen if necessary.
-
- reopen if necessary.
-
- When selecting CRS for restrictions (in Project properties>OWS Server), the first line is always blank, even though o...
-
- please tell me how to confirm my report.
-
- Could you confirm this issue in master, please?
-
- When I try to install plugins online (via internet) , I get error message and can't install them at all with my Windo...
-
11:53 PM Bug report #8186: Fail to make spatial index for shapefile, with Japanese string in the file name
- I found this problem in binary from OSGeo4w dev . code revision commit:0cac8b4
-
- after load shapefile that filename contain Japanese string, when make spatial index at the property dialog, fail.
In ... -
- Fixed in changeset commit:"e491acb2aa6e9351937d42944ebbe5d7573b5ca8".
-
- Seems so.
toString is the way to go. -
- QVariant::toString() seems to return better results than QString::number(), doesn't it?
In python:... -
- I haven't tried if it perform a correct validation when running from outside GdalTools.
-
- QgsRasterFormatSaveOptionWidget "validate" button always displays "Valid" when clicked from GdalTools GUIs (e.g. from...
-
- Salvatore Larosa wrote:
> here the crash is not dependent from plugins (I guess) as I run with --noplugins command.
... -
- Borys Jurgiel wrote:
> In my case the crash only happens if Value Tool is loaded (or was loaded in the session, even ... -
- In my case the crash only happens if Value Tool is loaded (or was loaded in the session, even if I unload it prior to...
-
- It is impossible to open FileGDB with the compiled QGIS version from the latest source (git clone git://github.com/qg...
-
07:01 AM Bug report #8181: groupLayerRelationship method broken in Python
- Sorry for the noise, I was under the impression of running current master but instead I was running an older version....
-
- Hi, try to update your revision, that should be fixed in commit:1f10010
I am closing as it is a duplicate of #8061
... -
- QGIS master (28efcda) crashes when using iface.legendInterface().groupLayerRelationship() in a project with at least ...
-
06:38 AM Bug report #8154: Problems with Atlas and Map dimensions on composer using Python
- I have resorted to using the getNewExtent() method in the atlasdialog.py file from the original atlas plugin. This do...
-
06:21 AM Feature request #8180: Encryption of Passwords in qgs files
- Fair point. But then I'd have to share the database password with the users which is very sub-optimal for a whole raf...
-
- You don't need to save username/passwords. If you do they'll be unencrypted (and you are warned about that), if you ...
-
- At least with Oracle (and the others? I have no way to test), when a project is stored as a qgs file, the password is...
-
- When a vector layer or a group is selected, mActionLocalHistogramStretch and mActionFullHistogramStretch toolbar butt...
-
- Fixed in changeset commit:"59222a08d05d28191ae1def36e9a7a6d8dd32eb4".
-
- After processing a raster layer (TTC2770v2_0_1.tif) with OTB (TTC2770v2_0_1otb.tif), I get a shifted display of
the n... -
- The present step is very tiny and often needs tens of clicks.
-
- If multiple layers are selected, the action is only applied to one of them. It would be very useful to apply them to ...
-
- I don't why I set this as blocker as it is not a regression.
-
- Now it seems that it affects also qgis server. see #7881
-
02:32 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
- I've just tried on Master on my Debian 7 PC, the bug's still there.
-
- Minoru Akagi wrote:
> The width values of real type fields in 2013_tissue_results.csvt are too short. With sufficient... -
- Minoru Akagi wrote:
> The width values of real type fields in 2013_tissue_results.csvt are too short. With sufficient...
2013-06-26
-
- The width values of real type fields in 2013_tissue_results.csvt are too short. With sufficient values like Real(10.3...
-
- A discussion on the german fossgis-user group revealed that generating raster previews slows down raster loading a lo...
-
- I reopen this bug because it seems that editing is still affected by the seriouos problems already described. I perfo...
-
- Matthias Kuhn wrote:
> What's left of python when running with --noplugins?
> Only the python console and part of the... -
- Can you try on QGIS master and report back? Thanks!
-
- Can you try on QGIS master and report back? Thanks!
-
- Can you try on QGIS master and report back? Thanks!
-
- I check with ST_Overlaps on Postgis layer after digitizing each polygon and the frequency this problem happens (numbe...
-
- Fixed in changeset commit:"21ff6204547b21439aa946fc26cb0cc83979416f".
-
- Fixed in changeset commit:"65aa1d5ae06e0f28fbbd75355a3c339dc7eb58b4".
-
- Hi, I will do at home as soon as possible. Thanks for the answer and the directions. Best regards.
-
- Daniel Vaz wrote:
> I read the OGR documentation and I suppose that it problem would be related with transaction syst... -
- The issue #3002 reports the same problem described here.
-
- I read the OGR documentation and I suppose that it problem would be related with transaction system which isn't being...
-
- I read the OGR documentation and I suppose that it problem would be related with transaction system which isn't being...
-
- I get the following QString error on OS X 10.8.3 with latest nightly build from Dakaota Cartography.
An error has o... -
- qgis.db is used by QGIS Desktop or Server to store user defined Coordinate Reference System.
This storing is mandato... -
04:29 AM Bug report #8162: QGIS master error matplotlib
- Jürgen Fischer wrote:
> Will happen automatically next week...
Perfect. Thank you very much. -
- Luca Congedo wrote:
> Thank you. This solved the issue.
> Probably matplotlib should be updated also in the weekly pa... -
- Save the transform parameters
(i.e., Transform: Linear Transform (-15.396, -3.1051) Scale (0.992788, 0.995925) Rotat...
2013-06-25
-
- Ah, I did the test on a windows 7 machine, so that might be linux-specific.
-
- Mathieu Pellerin - nIRV wrote:
> Giovanni, it works OK with me via Raster > Miscellaneous > Information on qgis maste... -
- Giovanni, it works OK with me via Raster > Miscellaneous > Information on qgis master as of commit 619558d.
-
- it returns always
@Usage: gdalinfo [--help-general] [-mm] [-stats] [-hist] [-nogcp] [-nomd]
[-norat] [-noct] [-no... -
- Fixed in changeset commit:"2d6c92b82b9ab070282cb073c0a58ebc249b713e".
-
- pull request to fix this issue: https://github.com/qgis/Quantum-GIS/pull/678
-
- This is an issue that Borys let me know. When I open shapefiles from command-line or browser, the encoding is set to ...
-
- Thank you. This solved the issue.
Probably matplotlib should be updated also in the weekly package (downloaded from h... -
-
- Please update your installation with latest matplotlib package (1.2.1) available in OSGeo4W.
BTW, this is not QGIS i... -
- Hi everybody,
I have this error with QGIS master weekly 1.9.0-25.
From the Python console run:
from matplotlib.back... -
- The "add feature" button is now active, but any try to commit an edit (on a wfs layer that in the server is a postgis...
-
- For point layers, clicking exactly on the point is difficult, and the user misses the popup very often. Better define...
-
- I have a *qgs* file which has a *maplayer* with a *datasource* with a wrong *user* field defined. Every time I open t...
-
- Fixed in commit:86bebab and following.
-
- Fixed in commit:86bebab and following.
-
- It was requested as a feature, however it was just a matter of gui tweaking, so it's fixed.
-
- Fixed in changeset commit:"619558dabc180f3471b26fef276ff7fbbf3e0e3f".
-
- Fixed in changeset commit:"86bebab3cee614acee434edcba4b232ce64b07e2".
-
- In official _QGIS_ builds for _Fedora_ the following patched is applied:...
-
- JEF, the static QTimer::singleShot seems to delete the timer once is executed. It causes an assertion fail in the slo...
-
- Fixed in changeset commit:"24bbd485a90dea3de0e26c0535c959fff1429768".
-
- Once any request is created, a periodic QTimer is started, aborting it every 20 seconds. It seems in some cases the t...
-
- The latter. I mean QNetworkReply::OperationCanceledError.
-
- Is that a verbatim message or translated back from Polish?
-
- Requests controlled by QgsNetworkAccessManager are aborted every 20 seconds (by default) by its timeout timer. As a r...
-
- Sometimes you can run a query that isn't quite correct (even though its syntax is correct and it executes) or you can...
-
- The element you want in the GetCapabilities is not mandatory.
QGIS-Server already provide the URL for GetLegendGraph... -
- Commit 562aec32d860cdf9baf6857232287f61c96c899c commit:562aec32d860cdf9baf6857232287f61c96c899c
-
- Commit 562aec32d860cdf9baf6857232287f61c96c899c commit:562aec32d860cdf9baf6857232287f61c96c899c
-
- Commit 562aec32d860cdf9baf6857232287f61c96c899c commit:562aec32d860cdf9baf6857232287f61c96c899c
-
- Commit 562aec32d860cdf9baf6857232287f61c96c899c commit:562aec32d860cdf9baf6857232287f61c96c899c
-
- Commit a5ca9d71808b505a84009b952bafcc21b7fb3dc2 commit:a5ca9d71808b505a84009b952bafcc21b7fb3dc2
-
- Commit a5ca9d71808b505a84009b952bafcc21b7fb3dc2 commit:a5ca9d71808b505a84009b952bafcc21b7fb3dc2
-
- Commit a5ca9d71808b505a84009b952bafcc21b7fb3dc2 commit:a5ca9d71808b505a84009b952bafcc21b7fb3dc2
-
- Commit a5ca9d71808b505a84009b952bafcc21b7fb3dc2 commit:a5ca9d71808b505a84009b952bafcc21b7fb3dc2
-
- In the OGC standard, the parameter PROPERTYNAME is ussed to filter attributes in the request getFeature. In version 1...
-
- Giovanni Manghi : does the bug still exists ?
-
-
-
- Sandro Furieri wrote:
> Geopackage will simply be based on the top of SQLite's own SQL dialect. Accordingly to this, ... -
04:49 AM Feature request #8143: Add tooltip about why users cannot delete columns in Spatialite layers
- Geopackage will simply be based on the top of SQLite's own SQL dialect. Accordingly to this, Geopackage as well will ...
-
- Jürgen Fischer wrote:
> The providers can only expose which capabilities they have (eg. DeleteAttributes), but can't ... -
- Sandro Furieri wrote:
> some tricky workaround is surely possible: e.g.
>
> # begin a huge monolithic transaction
> ... -
- regis Haubourg wrote:
> I'm now testing with 64 bit Win 7..
With a 64bit build? Otherwise it doesn't matter if you ... -
- Well, not sure if it is the same issue. Old one lead to crash, new one lead to no action. I'm now testing with 64 bit...
-
- just for curiosity: isn't this the old issue of printing on Windows? As QGIS on win is 32bit then it can use just 4gb...
-
- Threshold is too low. I was able to print a 300 dpi with no problem on A1 paper size, in yesterday's osgeo4w revision...
-
- Jürgen Fischer wrote:
> Jonathan Moules wrote:
> > But these two are the very first layers in the project is the prob... -
- Jonathan Moules wrote:
> But these two are the very first layers in the project is the problem (fresh start of QGIS).... -
- But these two are the very first layers in the project is the problem (fresh start of QGIS).
Both are added at the sa... -
- Adding layers usually doesn't change the extent of the project - only for the very first layer in the project sets th...
-
- Sorry for the delay. Re-tested, this time with some .asc files. Happens here too. Data is in EPSG:27700. See attached.
-
- If the file is created from scratch in master, then reloaded later, it works fine. So it seems to just have issue loa...
2013-06-24
-
- Hi all,
Is anyone else having problems with using atlas with python?
I am writing some python code that uses the At... -
02:30 PM Bug report #8147 (Closed): QGIS Tips - required some changes
- Thanks for the Tips
-
- Thanks for the Tips
-
06:10 AM Bug report #8147 (Closed): QGIS Tips - required some changes
- There are required some changes in QGIS Tips in connection with new version and also better understanding and remembe...
-
- From what I see your report is about qgis 1.8.
In QGIS master the things are a little better but still wrong, as the... -
- From what I see your report is about qgis 1.8.
In QGIS master the things are a little better but still wrong, as the... -
- From what I see your report is about qgis 1.8.
In QGIS master the things are a little better but still wrong, as the... -
- From what I see your report is about qgis 1.8.
In QGIS master the things are a little better but still wrong, as the... -
- From what I see your report is about qgis 1.8.
In QGIS master the things are a little better but still wrong, as the... -
- Could you please add sample data to allow me test locally? thanks!
-
- In the old PostGIS Manager plugin it was possible to add triggers for area/perimeter/length, that was very handy beca...
-
- Apparently in DB Manager I can create a view like
@CREATE VIEW test_view AS
SELECT a.gid AS gid, a.descricao, ST_Int... -
- The providers can only expose which capabilities they have (eg. DeleteAttributes), but can't tell upper layers why th...
-
- some tricky workaround is surely possible: e.g.
# begin a huge monolithic transaction
# rename the already existing ... -
- please note well: this is not a specific defect affecting the SpatiaLite data provider, it simply is a direct consequ...
-
- please note well: this is not a specific defect affecting the SpatiaLite data provider, it simply is a direct consequ...
-
- subject says it all.
I would add that from a user point of view it would be really appreciated a workaround to allow... -
- I do not have a clear recipe to replicate this, just use DB manager for a while as a normal user would do, add layers...
-
- In DB Manager I created a few views with quite a lot of records (thousands, tens of thousands) and when I open the "t...
-
- When trying to add in the canvas a view without a primary key using DB Manager it will fail "silently"***
A error me... -
- it used to work on 1.8
-
- When computing a new column of type real or double, it seems that is ok, but after saving edits and closing/reopening...
-
- Salvatore Larosa wrote:
> Maybe I am wrong, but I dont see any loss of attributes.
>
> If the layer is not categoriz... -
- Maybe I am wrong, but I dont see any loss of attributes.
If the layer is not categorized you can see the new split g... -
- My mistake it seems it still happens.
-
- Nathan Woodrow wrote:
> The iterator fixes in commit:4164d6ed0b84 and commit:3747c2bb02062
I'm testing with
49970b0... -
- Nathan Woodrow wrote:
> The iterator fixes in commit:4164d6ed0b84 and commit:3747c2bb02062
I'm testing with
49970b0... -
- The iterator fixes in commit:4164d6ed0b84 and commit:3747c2bb02062
-
- Nathan Woodrow wrote:
> Should be fixed now. Please test and reopen if not.
what it is the revision that fixes it? -
- enable data defined rotation -> ok
then
enable data defined position -> labels become horizontal
then
move manua... -
- Add a PostGIS layer table of attributes, toggle editing, click on "delete columns" and select >1 columns to remove.
... -
- The main thing to be aware of here is the Set Filter/Query option is setting a filter at the provider level, in most ...
-
05:03 AM Feature request #8141 (Open): query / filter on attribute tables with external tables joined
- concerns version 1.8 and 1.9
i have been searching various blogs and use groups and found that issue addressed allre... -
- Alessandro Ciali wrote:
> In the 2nd case, you have to select one row in the merge selected feature window and the cl... -
- In the 2nd case, you have to select one row in the merge selected feature window and the clik on the "Take attribute ...
-
> * selecting two or more features and using merge selected features tool without making any choice in the merge fe...-
- Matthias Kuhn wrote:
> Please test if commit:7d38eac solved this issue.
Hi Matthias,
it still crashes when clicking... -
- Matthias Kuhn wrote:
> Please test if commit:7d38eac solved this issue.
Hi Matthias,
it still crashes when clicking... -
- Matthias Kuhn wrote:
> This bug only concerns a crash when exiting qgis.
Hi Matthias, right. I got it also on exit. ... -
- This bug only concerns a crash when exiting qgis.
-
- Matthias Kuhn wrote:
> We can comment them again, that's not a big deal, the OS will clean up (at least the memory) o... -
- no more memory leak. Anyway the clip with the original posted dataset is very slow, but this is probably not a regres...
-
- no more memory leak. Anyway the clip with the original posted dataset is very slow, but this is probably not a regres...
-
- Until a recent qgis server upgrade things worked well. Now checked by setting up all fonts in the project a lmodern a...
-
- Checked with current master, seems to work fine.
Sorry for the noise. -
- Checked with current master, seems to work fine.
Sorry for the noise.
2013-06-23
-
- Just a quick question.
Are you sure that the fonts are properly installed on QGIS server? I also had font-issues bet... -
- I've tried clipping buildings_3763 (buildings.zip) shapefile with the clip_layer (clip_layer.zip) shapefile, and QGIS...
-
-
- Regis, this might be "fixed" by this commit:bed65cb1f4dbc582d0b3be0d3b1d9e9083e8086e
The above introduces a warning ... -
- Patric, others, has anyone witnessed this issue in the last few weeks? I did see this issue over a month ago but at t...
-
- Should be fixed now. Please test and reopen if not.
-
- Should be fixed now. Please test and reopen if not.
-
- Fixed in changeset commit:"4ecf3ebd0bae19f97f32bb040c9df95967135ba8".
-
- Hi,
with qgis-dev.
The proxy settings of options->network
seem don't be used by plugin manager to retrieve the list... -
- when clicking on the button to choose a vector...
-
- Hi, this is not the place where to make questions, for that please use the mailing lists, the irc channell or gistack...
-
- Hi, this is not the place where to make questions, for that please use the mailing lists, the irc channell or gistack...
-
03:29 AM Feature request #8136 (Closed): Buffer Distance Feature
- Hi,
In Buffer command, there is no option to define the unit of distance (such as in km, m, feet etc.). It only requ... -
- Seems to work fine here. Could you add some more details.
2013-06-22
-
- All the other providers are done now.
-
- All the other providers are done now.
-
- All the other providers are done now.
-
- Nathan Woodrow wrote:
> The PostGIS and spatialite driver are yet to be done.
so better tag this as "in progress"? -
- Fixed in changeset commit:"49970b0413d6b042e734b327f50013e8d42b6e34".
-
-
12:40 PM Bug report #8135 (Closed): Saving shp with joined attributes results in wrong column values
- I joined a shp attribute with a csv attribute. While the two are joined in the cache the number precision in the att...
-
- fixed in commit:99f998aa3
-
- fixed in commit:99f998aa3
-
- Fixed in changeset commit:"99f998aa30ec5862214e4dd971730980cb91aed2".
-
- With the latest version commit:f8d6e32 on win7 64bit, QGIS master no more crashes using merge selected features, but:...
-
-
- fixed in commit:684aa98e961
-
- fixed in commit:684aa98e961
-
- This patch does not solve the problem on a database with existing tables, but missing columns.
ogr2ogr produced such... -
- Fixed in changeset commit:"ef838c799f2a7e01b2057adc04c29d4bb484c2b7".
-
- documentation added in commit:c6a4bb86a.
-
- documentation added in commit:c6a4bb86a.
2013-06-21
-
- I have just tested version commit:f8d6e32 and it seems to perform editing in a right way! I've tested all the editing...
-
- This should be fixed now with the ogr provider. The PostGIS and spatialite driver are yet to be done.
- 07:23 AM Bug report #7472 (Closed): vector editing errors
- Fixed in changeset commit:"4164d6ed0b8498f3e3e45cfa40b639674c8c5074".
-
01:28 AM Bug report #8134: WMT-S doesn't draw an image if zoomed in beyond maximum tilematrix
- Ah thanks. That will be the problem. Sorry. I will contact our service devs.
-
- But there is a TileMatrix 20 in the capabilities, but it has the same scale dominator as 19. So I guess it's undefin...
-
- We are developing a new WMTS service and have found QGIS tries to request tiles for levels lower than supported in th...
-
- Fixed in changeset commit:"aa0a17b253f73ddaa913a09637a00175e3464a74".
-
- a similar issue was fixed a few days ago and affected the browser.
-
- Error is
Error -1
global name 'QString' is not defined -
- So it must be a local problem. I'll test with next builds. Sorry for the noise.
-
- So it must be a local problem. I'll test with next builds. Sorry for the noise.
-
- cannot confirm here on both Linux and Windows.
-
- cannot confirm here on both Linux and Windows.
-
- cannot confirm here on both Linux and Windows.
-
- Correct, only NULLs. I'm on Debian sid, up to date, self-packaged.
-
- av2.zip has one column filled only with nulls. Anyway, no crash here. Maybe it's OS dependent?.
-
- Not a general phenomenon. Can be reliably reproduced here with the attached sample.
-
10:39 AM Bug report #7618 (Feedback): Distance Matrix entries are only calculated for the first feature
- This issue is fixed thanks to the 'iterator bug' fix by Nathan
-
- There is no real "fix" for that, because one is handled by OGR, the other one by QgsExpression.
A recent similar bug ... -
09:02 AM Bug report #8129: Vector feature subset query uses ilike as like for non-latin letters
- Jürgen Fischer wrote:
> I suppose you're referring to OGR data sources. Does @ogrinfo -sql "select field from somesh... -
- I suppose you're referring to OGR data sources. Does @ogrinfo -sql "select field from someshapefile where FIELD like...
-
- When using "FIELD" ilike '%ā%' in attribute table expression, it will give both results with "ā" and "Ā" letters as e...
-
09:21 AM Bug report #8130 (Closed): WFS client: invalid columns after copy/paste
- When copying features from a Postgis layer to a WFS layer, attribute are set incorrectly. When saving the wfs layer, ...
-
- Tested on linux, QGIS master at revision 4164d6ed0b8498f3e3e45cfa40b639674c8c5074 (22/06/2013).
-
- When openening a Wfs multilines layer (gml:MultiLinePropertyType) that contains no record, the QGis layer has an "Unk...
- 07:23 AM Bug report #7862 (Closed): "Already active iterator on this provider was closed." when splitting ...
- Fixed in changeset commit:"4164d6ed0b8498f3e3e45cfa40b639674c8c5074".
-
05:54 AM Bug report #8108 (Closed): 'Select by location' does not show selection on map
- Tested it on Ubuntu 12.10 with a QGIS build from today and the problem is gone :)
(If you access the algorithm from S... -
- When rotating an object (rectangle) in the print composer, its size grows with the
amount of rotation.
2013-06-20
-
- Radim Blazek wrote:
> I have the same problem with current master with single WMS layer on Debian 5.0 and Qt 4.6.1, b... -
- Could be related, based on the stack trace.
Can you try to enable backbuffering in Settings => Options => Rendering. -
- Closing this, as it seems not to be QGIS specific.
If somebody else confirms or you have evidence, that it is QGIS re... -
- I have noticed the same bug in Qt Designer. So it should not b QGIS specific. But very weird though, and very annyoin...
-
- When a getFeature request has a FILTER parameter, and when no data corresponds, QGIS answer sometimes with ...
-
- We can comment them again, that's not a big deal, the OS will clean up (at least the memory) on app exit anyway.
But... -
- Commenting out the lines 799 and 800 in @qgisapp.cpp@ does not produce the crash.
-
- here the stacktrace with gdb:...
-
- Confirmed here also with the @qgis --noplugins@ command
-
-
- commit:469fb25300d95958e8ddaff8b691f9989456b532 disables 'jpeg' in capabilities
-
- I got rejected: http://trac.osgeo.org/gdal/ticket/5124
:-) -
- I've now tested version commit:e4b278d (win7 64bit). To be sure that any plugin could collide with merge tool, I rena...
2013-06-19
-
- vinayan Parameswaran wrote:
> Hi Giovanni,
>
> got time to test this?
Hi!
yes it is fixed!
there is till this iss... -
- vinayan Parameswaran wrote:
> Hi Giovanni,
>
> got time to test this?
Hi!
yes it is fixed!
there is till this iss... -
- Hi Giovanni,
got time to test this? -
- uff... it is a roller coaster... it seems fixed for PostGIS but still an issue for SL, can you confirm?
-
- Fixed in changeset commit:"b16cc468c7839fb152e0aa23020221e368b5970b".
-
- In QGIS master, install a plugin with a description which is taller than fits in the window, so you need to scroll do...
-
- Fixed in changeset commit:"09a9a81bb0ff3edfdc5090300dd050e88ec0cd9c".
-
- browse input folder - press ok.....
-
- Fixed in changeset commit:"09a9a81bb0ff3edfdc5090300dd050e88ec0cd9c".
-
- add any vector layer with some unique values in any field. Press ok on the splite vector layer tool....
-
- So, relative paths *to* projects are not supported as for now.
-
- Done: http://trac.osgeo.org/gdal/ticket/5124. The line number was a little different in trunk.
-
- The default file extension for a format is taken from the GDAL metadata for that format. Unfortunately, for GeoTiff G...
-
- The default file extension for a format is taken from the GDAL metadata for that format. Unfortunately, for GeoTiff G...
-
- Fixed in changeset commit:"4ea2769d92baecd1d935ff1e701ab04ed33db194".
-
- Furthermore, all the overlapping toolbars make the first impression *very* poor.
-
- When QGIS is started the first time, all toolbars are mashed in one row and essential tools are hidden where many new...
-
- Fixed in changeset commit:"b2441f809897fdaed1656cb3fb6653da9a34b1b2".
-
- seems to be an error with the new api updates..
add any raster layer to map.
open proximity(raster distance) tool.
c... -
- Fixed in changeset commit:"0b0de71f69f36293aabd824736bd0c468318d414".
-
- open the DEM tool.
1.selecting any of the checkboxes would popup python errors..
2.using the browse dialog, specify o... -
- Using the new data defined symbology options to e.g. color features based on attribute values does not offer any usab...
-
- Please test if commit:7d38eac solved this issue.
-
- Please test if commit:7d38eac solved this issue.
-
- Fixed in changeset commit:"7d38eac04352bbfe7800782e462380f9525fe6cb".
-
- Fixed in changeset commit:"419d8ee5931225d672d92984f60c54b69c2f25e7".
-
- I get a different error now..
An error has occured while executing Python code:
Traceback (most recent call last):
... -
- Fixed in changeset commit:"cfadfb5573eb68a4a754e5cb918a09e1e3af2c94".
-
- ...
-
- +1, you can raise a bit priority for this
-
- Currently, ``buildvrt`` adds layers as a list of arguments; this can cause problems in case of a very long list. Bett...
-
- Hi Vinayan,
No, in the previous screencast it is not visible, but see this: http://goo.gl/f3a7J
-> New project cras... -
- Do you have any plugins enabled? Especially an open plugin dock or window would explain something.
-
02:17 AM Feature request #8112 (Closed): GetLegendGraphic URL for each Layer in GetCapa
- Some clients need the GetLegendGraphic URl to be provided as child node of Layers-tag in getCapabilities file. I'm no...
2013-06-18
-
01:28 AM Bug report #7643: Empty console Output on R, under SEXTANTE
- Hi Filipe,
Thanks for your patience. I re-run the algorithm, and the output of the sextante_script.r.Rout (which is a... -
- Hi Filipe,
Thanks for your patience. I re-run the algorithm, and the output of the sextante_script.r.Rout (which is a... -
- The plugin manager now shows an error, if the domain could not be resolved or other network related errors.
If I ent... -
- I confirm here in a Debian box, also for shapefile. The following request works:
http://192.168.0.79/cgi-bin/qgis_ma... -
- I confirm here in a Debian box, also for shapefile. The following request works:
http://192.168.0.79/cgi-bin/qgis_ma... -
- I did not add any layer. simply opening and closing QGIS would produce this. Tested on Ubuntu 12.04
-
- I will test for this issue asap on both Linux and Windows. Did you added a layer using the browser? There was an issu...
-
- I will test for this issue asap on both Linux and Windows. Did you added a layer using the browser? There was an issu...
-
- The current master crashes when closing a project. here is the output..
QGis Version: commit:da0e4f3... -
- Hi Pedro,
Thanks for reporting..it is hopefully a simple fix. Are you sure the stack-trace posted is based on crash w... -
- Hi Vinayan,
Thank you for the quick fix! But now two different things occurs:
1) If you click on some of the error... -
- This seems to be solved, but I stumbled upon some other problems trying it. Can you please test and update the status...
-
- ...
-
- Fixed in changeset commit:"6eb31889d8ec57641046b676b59c41a2cbbf02c4".
-
- Distance matrix does not work after the recent python updates.
Issue 1 - 'Input Unique Id' combobox is not populate... -
- Fixed in changeset commit:"5e4a9dff6b4374e448307482baecab4688868fb8".
-
- press ok with default values on any shapefile.
log..... -
- Fixed in changeset commit:"5e4a9dff6b4374e448307482baecab4688868fb8".
-
- press ok with default values..here is the log.....
-
- Fixed in changeset commit:"5e4a9dff6b4374e448307482baecab4688868fb8".
-
- I do not know much about this tool..but pressing ok produces the below message.....
-
- Just tried again but without checking the *Skip attribute creation* box. The only real difference here was that the D...
-
- Interesting: I ran the same operation back to back (with the filtered dataset). It took 6 minutes the first time, 19 ...
-
- Here's that file of the heatmap errors.
-
- OK, on the export of the filtered subset of only about 6000 points, it takes about 6 minutes to complete. I've attach...
-
- This is interesting. I get the same symptom if I use the *Filter* feature to bring the layer down to about 6000 point...
-
- I tested with a 568k polygon layer on a remote postgis server, and it took about 2 minutes to export it as shape (wit...
-
- On 1.8.0 and 1.9 192e130, I load a PostGIS layer with 2,889,598 points. These represent a few years' worth of a type ...
-
- When creating a new GeoTIFF heatmap, the Heatmap module uses a *.tif* extension. Please use *.tiff*. *.tif* is a hold...
-
- it works fine here with a build from yesterday on Linux. What build are you using? platform?
-
- If one runs a 'Select by location' in QGIS 1.9.0-Master, the map is not updated with the new selection. If you, after...
-
- > *Please notice that actually*
> *qgis will use the posgres 8.3 libraries that are all dismissed.*
> *This mean the ... -
- I agree the windows is not a primary consideration
Infact we are just moved on Linux with MapServer.
And plan to use ... -
- Windows Server 2003 is already out of mainstream support, and no service packs have been made for it since 2009: http...
-
- >Therefore, the rare Windows machine that don't have Calibri and can't even use one of the free ways of getting it is...
-
- > *The question is to think to project qgis like a project for only that machine where it born (for you eyes only) or...
-
- now it seems that the issue changed as the CRS can be choosen but not from the "recently used..." list.
-
- It should be fixed in commit:a65a6b7bd84769e79
although I have no proxy to test it. Please reopen if still broken. -
- It should be fixed in commit:a65a6b7bd84769e79
although I have no proxy to test it. Please reopen if still broken. -
- It should be fixed in commit:a65a6b7bd84769e79
although I have no proxy to test it. Please reopen if still broken. -
05:47 AM Bug report #8067: layer with cylindrical equal-area projection does not render correctly
- Yes that is the correct projection. It is cylindrical equal-area with a non-standard reference location (E90 N30).
-
- Brian Sipos wrote:
> Attached is the shape causing issues. I re-encoded as SQLite to keep a single file, but the same... -
- When trying to connect to a spatialite db with missing columns in the tables "geometry_columns" or "spatial_ref_sys" ...
-
2013-06-17
-
- The question is to think to project qgis like a project for only that machine where it born (for you eyes only) or f...
-
- I'm glad you're thinking outside the box, but I have four concerns:
# The fonts they mimic or intend to replace (Time... -
- Why not use the Font Liberation ?
https://fedorahosted.org/liberation-fonts/
It is free and public and so it could ... -
- This has improved somewhat in master. If you try to delete a joined column or edit a joined field it fails silently,...
-
09:15 PM Bug report #8098 (Closed): QGIS trunk fail to compile with PyQT 4.10.2
- I am using ArchLinux and making a local package of QGIS trunk. It fails after PyQT upgrades to 4.10.2 today....
-
- > that at least for point layers,
I just tested with current master and it occurs with polygon layers to. I haven'... -
- Fixed in changeset commit:"3d7b802dc514912a695b26885e398f5266906e1f".
-
- Hi,
The topological errors found by the topology checker and identified in red does not disappear, even after doing ... -
- Hi,
When you click on "Layer -> Show all layers" or "Layer -> Hide all layers", the option is applied in the TOC but... -
08:43 AM Bug report #8085: A 64 bits build on Windows crash on exit
- OK, I'll provide feedback on that issue of the developers list but I found bit more on this and another trouble.
-
- Closing as the original issue is solved.
It would not complain if you have no python support (to test, try to open t... -
- Things are getting better. With that condition it now exits cleanly but your question makes me think there is somethi...
-
- Maybe you did not compile / load the python library at all?
Can you try to update the code to use the following if:
... -
- I have some experience with VS debugging but never with a dump file so I don't really know how it would work. I'm afr...
-
- I just realized, that I am not even able to extract a backtrace from the dump file without the matching binaries. I a...
-
- zipped the file size dropped to 1.4 Mb so it should pass now
-
- Joaquim Luis wrote:
> No no python code executed. Only opening and close causes the dump generation.
> I am trying to... -
- No no python code executed. Only opening and close causes the dump generation.
I am trying to upload the dump but I s... -
08:38 AM Bug report #8094 (Closed): mistake in Fr translation "Generation d'atals" in the composer
- "Generation d'atals" instead of "generation d'atlas"
-
- French metropolitan Lambert SCR, excepté L93, leads to error message :
"exception
poursuivre la transformation de ...... -
- When one has a Plugin repository at a local server inside a local network one cannot use the local plugin repository ...
-
- Thank you for filling this bug.
This problem is solved already in commit:b96f67b
Please update (in case your reposit... -
- Hello,
When I use Delaunay triangulation of fTools of Qgis version 1.9.0+git20130615+192e130~precise-ubuntugis1 (pre... -
- Thank you for reporting.
These issues should be resolved, but please keep us posted on further errors -
05:46 AM Bug report #8089 (Closed): Errors with polygonize and rasterize
- Updated this morning and changeset does indeed fix most errors in GdalTools and Ftools. However, errors remains in po...
-
- In the Heatmap plugin, if I change the *Rows* field for a heatmap in the *Advanced* section, which automagically chan...
-
- Attached is the shape causing issues. I re-encoded as SQLite to keep a single file, but the same drawing issue occurs...
-
- Brian Sipos wrote:
> It's relative large in size (1.5 MiB) but I can send the shape files if needed to diagnose this... -
- Yes, I just installed QGIS master code rev. 28efcda and this issue is present. I free-hand drew some arbitrary layer ...
-
- Fixed in changeset commit:"1f10010ebf064ce31a53af2917231bd9ac41e413".
-
- I can confirm this problem when compiling master on many Linux distributions.
-
03:37 AM Bug report #7802: "Join attributes by location" in qgis master has a memory leak and leads to crash
- Hi all, i confirm that now it works, the memory leak is resolved.
Regards!
-
- vinayan Parameswaran wrote:
> Giovanni..not at all..simply that rule will not run if the geometry contains such an er... -
- Giovanni..not at all..simply that rule will not run if the geometry contains such an error..i am still working out wh...
-
- vinayan Parameswaran wrote:
> I will fix the crash today or tomorrow.. it is due to an error in the geometry(multiple... -
- it works here on the latest master revision. Can you attach sample data? cheers.
-
02:34 AM Bug report #8088 (Closed): extract projection fails
- This occurs after I select a tif:...
-
-
- Marco Hugentobler wrote:
> commit:6370153e81bba76997ec1db5c1296f71b284c256 should solve the problem with ring-less po...
2013-06-16
-
01:36 AM Bug report #8087 (Closed): QGIS crash when read layer from mssql
- Error in terminal:
# qgis
(If push the button connect to mssql)
*** Error in `/usr/bin/qgis.bin': malloc(): memory co... -
- Thanks Larry,
Bug solved for me. I couldn't reproduce the issue vith bold/italic stuff. Do I close the ticket?
-
- I will fix the crash today or tomorrow.. it is due to an error in the geometry(multiple nodes at the same coordinate....
-
- No patch so far .. I've been only working on the UI ..
Don't have the skills to debug that error though I think it sh... -
- Werner Macho wrote:
> Thanks for the Clearification .. so the Tolerance should be kept hidden from beginning on.. Bec... -
-
-
-
- Agreed, seems fixed now.
-
- 1.9.0+git20130614+07ea0aa~unstable1 is from 2013/06/14.
The fix (commit:fec833f) was introduced later (2016/06/15). -
- I'm getting the crash with 1.9.0+git20130614+07ea0aa~unstable1
-
- #7931 seems to be related and is fixed since yesterday. Can this one be closed as well?
-
- That call was inserted recently to cleanup the python environment.
I can imagine that this problem is unrelated to yo... -
- OK, that worked. The crash dump is now 10 Mb
It crashes in the QgisApp::~QgisApp() destructor, near its end at
m... -
- Joaquim Luis wrote:
> Tried to build a debug version but errors at
>
> [...]
Try RelWithDebInfo
-
- Tried to build a debug version but errors at...
-
01:25 PM Bug report #8085: A 64 bits build on Windows crash on exit
- confirm crash while exit on win7 64bit.
Screenshot with dmp popup is attached. -
- Dump file did not go through. Size limits?
-
- Here goes the dump file
-
- Produce a backtrace please.
-
- Hi,
I built a 64 bits version using pure native dependencies, that is everything id build with VS2010 64 bits.
Altho... -
- In Arch Linux I get the same error as:
Warning: QLayout: Attempting to add QLayout "" to ModelerParameterDefinitionD... -
- Joaquim Luis wrote:
> How can it be broken if I manually fix the makefiles to point to sip location and than it works... -
- How can it be broken if I manually fix the makefiles to point to sip location and than it works?
-
- sounds like you sip install is broken.
-
- sounds like you sip install is broken.
-
- Hi,
please use meaningful subjects/titles. -
- Fails to find sip. For example, running some commands from the FindSIP.py file...
-
- Fixed in changeset commit:"06272115d533fa9d2ae79dba2fd5fb8ad1c3175f".
-
- The repeated occurrence of GEOS_LIBRARY at line 33-34 is an error as it will cause a linking error when code will try...
-
- Fixed in changeset commit:"65b0cd924302fe0eb82e0ebf6d948f3cc74a0603".
-
- no, don't think so. Switching between the different output formats was not available in 1.8 yet
-
- is this a regression since 1.8 and/or previous master versions?
-
- When loading a wms (eg http://geodata.nationaalgeoregister.nl/ahn25m/ows and then select layer 'bladindex'), loading ...
-
- Oops, I meant to file this as a feature request! Can someone fix?
-
- #8079 was a false alarm because I did not catch that a *?qgis=2.0* querystring is appended to whatever is specified i...
-
- #8080
-
- *?qgis=2.0* is what I was missing! In *Plugin Manager* > *Settings*, I double-clicked on the repository under *Plugin...
-
- Aren Cambre wrote:
> You're saying that http://plugins.qgis.org/plugins/plugins.xml is not correct then? It says both... -
- You're saying that http://plugins.qgis.org/plugins/plugins.xml is not correct then? It says both plugins have the sam...
-
- most plugins have not yet been updated to work in the latest master revision, Openlayers is one of them. New memory l...
-
- most plugins have not yet been updated to work in the latest master revision, Openlayers is one of them. New memory l...
-
- Plugin Manager appears to be arbitrarily excluding some plugins.
Example: In http://plugins.qgis.org/plugins/plugins... -
- I've had a few situations where I am experimenting with Heatmap plugin settings, progressively refining the settings ...
-
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
confirmed on ... -
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
The leak seem... -
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
The leak seem... -
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
The leak seem... -
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
The leak seem... -
- Matthias Kuhn wrote:
> Please check if this was solved with the fixed memory leak in the OGR provider.
The leak seem... -
- Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat... -
- Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file path, I get a minidump. ...
-
- Turns out that QGIS in fact opened the heatmap as another layer immediately after creating the heatmap. It just took ...
-
- I just used the Heatmap plugin to create a heatmap. Per Process Explorer, QGIS retains a lock on the file even when i...
-
- In the attached image, I undocked the *Log Messages* window by dragging its title bar. Note how the area where it was...
-
-
- fixed in commit:3d9d1eeb
-
- fixed in commit:3d9d1eeb
-
- Now it seems the Union tool is broken after the SIP update, the message is (notice that it just shows in the log pane...
-
- Larry Shaffer wrote:
> Thanks for the URL.
>
> This appears to be related to issue #7928. There is something wrong i... -
-
- The error (unicode object has no attribute contains) should be resolved. I will leave it open for the missing check f...
-
- Fixed in changeset commit:"f6ae6c48b35a1f858a78f890c050f10b4ef481cf".
-
-
- Thanks Matthias. You are correct. It was not set to autogenerate by default. After selecting autogenerate it works fine.
-
- I also does not confirm.
-
- Now I see,
the "date format" parameter is mandatory, without it then the widget does not work as does not use any de... -
- Now I see,
the "date format" parameter is mandatory, without it then the widget does not work as does not use any de...
2013-06-15
-
- Works here.
Can you make sure, that in "layer properties" => "Fields", the combobox for "attribute editor layout" is ... -
- Hi all,
I've also found a peculiar problem when creating new polygons. After finishing drawing the polygon, the attr... -
- Hi all,
I updated yesterday, and then again today. Yesterday's update (which was labeled as 20130612) and today's up... -
- Please check if this was solved with the fixed memory leak in the OGR provider.
-
- I cannot reproduce it either
-
- Loading PostGIS native rasters through DB Manager is slow but effective. When loading an out-of-db (registered throug...
-
08:30 PM Bug report #8058 (Closed): No update of CRS cache when modifying a custom CRS
- Yes, can be closed for me, the main issue is solved.
-
- >I added a pull request to deal with deleted custom CRS
Applied. It would also be possible to just delete the crs ca... -
- can this be closed?
-
- Hi Régis,
Should be fixed with commit commit:9e2c4a0 Please test.
There remains an unrelated issue when bold and/or... -
- Larry Shaffer wrote:
> could you see if it also happens when a font size is defined in map units (like UTM meters)?
... -
- Assuming this is for fonts defined as points (is it?), as a test, could you see if it also happens when a font size i...
-
- I believe this may be due to my recent reworking of that part of labeling engine. I'll be working on #3975 next (same...
-
- Confirmed the issue with font sizes. I cannot see any problem with transparencies of both features or labels.
-
- Thanks! I was hoping there was some meta-font you could use, similar to *MS Shell Dlg*, but I couldn't figure one out...
-
- Hi Aren,
Thank you very much for pointing this out, and for providing excellent reference links. I agree it should b... -
- On Windows, the labeler uses *MS Shell Dlg* font for labels by default. This appears to be a holdover from olden days...
-
- Hi Filipe,
Filipe Dias wrote:
> Of course it should not be empty. But a warning message should be displayed (e.g. Th... -
- Of course it should not be empty. But a warning message should be displayed (e.g. The selected field has NULL values)...
-
- If you choose a column with no values (and it should have something to work) then the error is the one you report.
A... -
- If you choose a column with no values (and it should have something to work) then the error is the one you report.
A... -
- If you choose a column with no values (and it should have something to work) then the error is the one you report.
A... -
- If you choose a column with no values (and it should have something to work) then the error is the one you report.
A... -
- Filipe Dias wrote:
> Im using the latest version before the SIP update.
then you should re-test after updating, the ... -
- Im using the latest version before the SIP update.
-
- Steps to reproduce
Vector
Random points
Use value from input field (in this case "id" which is NULL)
Define output
Ru... -
- Fixed in changeset commit:"192e13013b24d8c3be3584555db11b9ab61dec37".
-
- Fixed in changeset commit:"e44907868299f013b7d0a8f54f00dc0a5dd916b3".
-
- The inconsistent icons of qgis core tools are
* add oracle layer
* add sql server layer
* add sql anywhere layer
* a... -
- The inconsistent icons of qgis core tools are
* add oracle layer
* add sql server layer
* add sql anywhere layer
* a... -
- In 07ea0aa, the icons for adding new layers are inconsistent. All seem to use a newer style except for MSSQL and Oracle.
-
- On Windows 7, it is normative for QGIS to default to your own documents directory (*C:\\Users\\_username_\\Documents*...
-
- Well possible. It was in the OGR provider whenever a feature was requested with FilterFid.
-
- Matthias Kuhn wrote:
> Fixed in commit:5cbfe07
> Can you please verify that:
> * The tool works properly again
> * Th... -
- Fixed in commit:5cbfe07
Can you please verify that:
* The tool works properly again
* The memory leak issue is resolved -
- Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
bump, see #4419-5 -
- Does this happens on QGIS master? please try and report back. cheers.
2013-06-14
-
- can not be reproduced here on the latest master (Linux).
I don't understand why it happens on Windows, maybe convert... -
- affects me too, same description.
-
- Steps to reproduce:
1. Open db manager
2. Enter into a database (spatialite or postgis, doesn't matter)
3. Open the S... -
- Another possible one: http://mapicons.nicolasmollet.com/
Thanks Werner! -
- Fonts in qgs-server are bigger than in the client, and look much worse (rasterized?). Confirmed in two different inst...
-
This works for me. Actually the behavior is not exactly the same, as the layers are reprojected automatically as soo...-
- The updateCRSCache function is fine. However, there is also a crs transform cache that copies the crs and that needs ...
-
- Should be fixed now.
- 09:03 PM Bug report #7931 (Closed): QGIS crashes when clicking "new project" or in program exit if a layer...
- Fixed in changeset commit:"fec833f14553effb2d242f6832c6b17198337987".
-
- Fixed in changeset commit:"6c2689edc35648100dcf197582d280eba4a80714".
-
- should not be blocker?
-
- Steps to reproduce:
1. Open db manager
2. Expend the spatialite node, and expend any spatialite database present
3. Q... -
- Fixed by Etienne in commit:84d77663d8478e14dbd6534d624545a632db7307
-
- Fixed by Etienne in commit:84d77663d8478e14dbd6534d624545a632db7307
-
- I am importing some line-string data along with a set of political-boundary reference lines as separate layers. When ...
-
- commit:6370153e81bba76997ec1db5c1296f71b284c256 should solve the problem with ring-less polygons. Do you confirm?
-
- I close the ticket this work correctly on other external system, as reported.
So the only possible cause can be an in... -
- I close the ticket this work correctly on other external system, as reported.
So the only possible cause can be an in... -
- I tested using a subfolder as relative path.
Still it is not working.
More precisely.
I'm able to connect to the qgi... -
- Hi,
I'm running OSGEO4W master under windows 7 enterprise 64 bits service pack 1. I remember having the same proble... -
- I am using python 2.7.3-0ubuntu7 and python-sip 4.13.3-2 in Linux Mint 14 (ubuntu quental), latest master.
The patch... -
- I've just pushed the changeset :
https://github.com/qgis/Quantum-GIS/pull/658
2013-06-13
-
- Seems you don't have any Python support enabled. If you use http://qgis.org/debian-nightly packages, make sure you ha...
-
- Seems you don't have any Python support enabled. If you use http://qgis.org/debian-nightly packages, make sure you ha...
-
07:41 PM Bug report #8063 (Closed): Does not appear buttons in left panel 'Get more' and 'Settings' from ...
- OS: Debian7 Wheezy (new GNOME) 64bits
Does not appear buttons in left panel: 'Get more' and 'Settings' from 'manage ... -
- There are no 1.8 builds for jessie - try the "nightly builds of master for unstable/sid":https://issues.qgis.org/proj...
-
- There are no 1.8 builds for jessie - try the "nightly builds of master for unstable/sid":https://issues.qgis.org/proj...
-
12:39 AM Bug report #8064: Python error on QGIS 1.8.0 when running on Debian testing with latest updates
- Giovanni Manghi wrote:
> most probably a local issue, maybe you have mixed packages?
Mixed packages of what?
This ha... -
- most probably a local issue, maybe you have mixed packages?
-
- When launching QGIS 1.8.0 on Debian testing with latest updates an error appears:...
-
- Works fine here with latest master
-
- Mine is just improvisation.
The attached patch should fix the problem !
(but I do not know if it breaks something e... -
- this happens if there are groups or not
-
- I have a python plugin which uses legendInterface().groupLayerRelationship() and when trying to port it to new spiv2...
-
-
- Fixed in commit:820a0f783f135756e9
I'd be thankful for any extensive installer testing, as I don't use proxy. -
12:59 PM Bug report #8060 (Closed): pyplugin_installer
- When using a network proxy, the python plugin installer fails with an error with the current pyQT Api switcheroo.
Th... -
- Hello.
I can't reproduce your bug. Exports as images (jpg) are fine for me on my test case. (QGis MASTER a3ea7ce/ Ub... -
- Should be fixed with commit commit:d547b25
Please test. That commit also fixes another unreported bug where scales c... -
11:19 AM Bug report #8052: QGIS 2.0 does not respect labels' scale-based visibility option when opening pr...
- Hi Larry.
I wasn't aware of issues going from 1.9 to 2.0. I assumed that they were the same version and 2.0 was a co... -
- Hi Duarte,
This is a known effect after recent changes to new labeling to support expressions ("mailing list posts":... -
- Hi Duarte,
This is a known effect after recent changes to new labeling to support expressions ("mailing list posts":... -
- Hi Duarte,
This is a known effect after recent changes to new labeling to support expressions ("mailing list posts":... -
- The min/max scales are set but disabled because the checkbox is turned off.
It is a migration issue of old projects.... -
10:12 AM Bug report #6476: data defined ellipse symbols on polygon centroid fill
- Posted email to dev mailing list to see if anyone else was working on simillar bugs:
http://lists.osgeo.org/pipermail... -
- In 1.8, if I update a custom CRS, I can directly use the new value for this CRS, while in master, I have to restart Q...
-
- While translating I found some strange strings:...
-
- What is the OS of your server ?
--> The server OS is RedHat ES6 64 bit.
Do you have the same problem with other vect... -
- * What is the OS of your server ?
* Do you have the same problem with other vector data file ?
* Do you use MAP param... -
I create a db spatialite using the spatialite 4.0 or 4.1
after this I convert it to a spatialite 3.0
On a windows 7...-
- Can you give us more information :
* How did you defined that QGIS-Server doesn't find spatialite db in relative path... -
- yes it looks fine.
-
- duplicates #8054
-
- duplicates #8054
-
- 1. The widgets_tree.py rejects dialogs containing qgs widget classes, thus they are not included to the custiomizatio...
-
- See the discussion: http://lists.osgeo.org/pipermail/qgis-developer/2013-June/026738.html
and please don't move autom... -
- QGIS should render ring as a hole in the polygon and this indeed happens with attached TAB, but not with MIF/MID.
Li... -
- see also #8055
-
- 1. The widgets_tree.py rejects dialogs containing qgs widget classes, thus they are not included to the custiomizatio...
-
- It's probably still valid in master, however I can't check it because of #8054.
-
- Panels disabled by the customization are not listed under right-click on the toolbar area, what is ok.
However they a... -
- I suspect it's this
// TODO[MD]: just one resize of attributes
f.setFields( &L->mUpdatedFields );
In QgsVe... -
- I try to get features within some rectangle, and want to get only some attributes without geometries. So I use next c...
-
- confirmed here.
-
- confirmed here.
-
- mmqgis is a 3rd party plugin, you must notify the author Michael Minn <[email protected]>.
cheers! -
- mmqgis is a 3rd party plugin, you must notify the author Michael Minn <[email protected]>.
cheers! -
- Denis Rouzaud wrote:
> any idea what to look for?
> is it a problem of my OS? Although, I only experience this in QG... -
- QGIS could improve the non default ( ) use project CRS / ( ) use default CRS displayed below settings for loaded laye...
2013-06-12
-
- any idea what to look for?
is it a problem of my OS? Although, I only experience this in QGIS. Qt related? -
- When an embed group is loaded with all its layers visible, it is not checked.
See image. attached or here http://ima...
Also available in: Atom