QGIS » QGIS Application

2015-07-07

01:22 PM Bug report #13065: WFS 1.0.0 Client requests with a GML component fail against Geoserver (lack na...

For context, in the above case, I had used the expression string builder to issue the filter:
@intersects($geometry, ... Jeff G

11:18 AM Bug report #12933: Heatmap generating an empty raster

Can you move the priority back up now that it is clear your reasoning for dropping it was wrong (that the issue was d... David Vanescentes

11:01 AM Bug report #12933: Heatmap generating an empty raster

What do you mean when you say "are you using a proper search radius"? Like I wrote above, I tried using a radius of ... David Vanescentes

10:26 AM Bug report #13075: Opening field calculator eats up all CPU

Tested on another machine, it works, so it must be a local issue. It is pretty dangerous however, so it would be good... Paolo Cavallini

08:19 AM Feature request #13087 (Closed): Add polygon drawing tool to print composer

It would be very nice with the possibility to draw polygons in the print composer. Just like the polygon drawing tool... Jakob Lanstorp

2015-07-06

01:24 AM Bug report #13084 (Closed): Segfault when accessing geometry from Python console

Duplicate of #777.
A solution is to keep temporary reference to the feature you work with:... Martin Dobias

01:24 AM Bug report #13084 (Closed): Segfault when accessing geometry from Python console

Duplicate of #777.
A solution is to keep temporary reference to the feature you work with:... Martin Dobias

09:24 AM Bug report #13084 (Closed): Segfault when accessing geometry from Python console

Load the test data. Open python console. Run
@
iface.activeLayer().selectedFeatures()[0].geometry().exportToWkt()
... Daniel Baston

03:14 PM Bug report #13086: Attribute Table not updated after using changeAttributeValue

Thank you very much Luca Congedo

03:06 PM Bug report #13086 (Closed): Attribute Table not updated after using changeAttributeValue

Already fixed in master and backported to 2.10 Nyall Dawson

03:06 PM Bug report #13086 (Closed): Attribute Table not updated after using changeAttributeValue

Already fixed in master and backported to 2.10 Nyall Dawson

02:53 PM Bug report #13086 (Closed): Attribute Table not updated after using changeAttributeValue

Hello,
in QGIS 2.10 after editing a shapefile with changeAttributeValue the Attribute Table is not updated (but the ... Luca Congedo

01:07 PM Feature request #13076 (Closed): Case insensitive filtering of field names in expressions

Nyall Dawson

08:37 AM Feature request #13076: Case insensitive filtering of field names in expressions

OK, in this case it can be closed (sorry I can't test on 2.10, because of other bugs).
Thanks. Paolo Cavallini

02:41 AM Feature request #13076: Case insensitive filtering of field names in expressions

just tested (2.10 and msater), it is case insensitive. Giovanni Manghi

02:24 AM Feature request #13076 (Feedback): Case insensitive filtering of field names in expressions

This is the case since 2.10... or am I misinterpreting what you're after? Nyall Dawson

11:50 AM Feature request #13085 (Open): Add WMS-T (time) support

Add support for WMS with time support to Add WMS layer.
http://docs.geoserver.org/latest/en/user/services/wms/time... Anita Graser

08:28 AM Bug report #13082 (Closed): Removing a shape file layer doesn't close the file.

if you add a layer in QGIS Desktop 2.9.0 (61d81f0) and you remove it, the file isn't close and therefore can't be ove... Axel Volley

07:45 AM Bug report #13081 (Closed): Zonal Statistics miscalculates when handling polygons without raster ...

I believe the title says it all.
Working with the attached sample data, Zonal Statistics ended up calculating _means... Tobias Klinge

07:39 AM Bug report #13080 (Rejected): QT Forms. Opening two forms using IdentifyFeatures crashes

The following bug is referring to #12729 and related #12676 and #12711. The issue was expected to be fixed in version... Stelios Papageorgiou

07:10 AM Feature request #12109: Difference from 2 polygon in the same layer

Clipper plugin does the work. Could it be a good thing to add it to advanced editing bar? Luca Lanteri

05:41 AM Bug report #13079 (Closed): Postgis Hstore Postgresql osm.pbf file osmosis auto convert

Because i am not sure what should be changed, the title is "Postgis Hstore Postgresql osm.pbf file osmosis auto conve... baditaflorin -

05:35 AM Feature request #3989: PostgreSQL hstore support

i am using the latest version of QGIS baditaflorin -

05:34 AM Feature request #3989: PostgreSQL hstore support

I load the osm.pbf file to a postgresql with osmosis , but then i cannot do nothing with the data, because all the ta... baditaflorin -

03:48 AM Bug report #13077: qgis segmentation fault stylemanager

Great! It works! Holger Naumann

02:48 AM Bug report #13077 (Closed): qgis segmentation fault stylemanager

Fixed in changeset commit:"f4f7924dd8b0e0b4a3faf274c0872c17c27d0f2b". Nyall Dawson

03:32 AM Bug report #13078: Size of legend items

Vincent - looks related to your legend related changes, mind taking a look? Nyall Dawson

02:43 AM Bug report #13078: Size of legend items

No problem.
Holger Naumann

02:43 AM Bug report #13078: Size of legend items

No problem.
Holger Naumann

02:43 AM Bug report #13078: Size of legend items

No problem.
Holger Naumann

02:36 AM Bug report #13078 (Feedback): Size of legend items

Giovanni Manghi

02:32 AM Bug report #13078: Size of legend items

Can you share your project? Nyall Dawson

02:01 AM Bug report #13078 (Closed): Size of legend items

The legend looks ugly if i use map units in symbology.
It looks very good in < 2.10. Holger Naumann

03:26 AM Bug report #13071: Editing tools not available with PostGIS layers

Michal Zimmermann wrote:
> Thanks that works, QGIS crashes when tries to save the changes though. All the PostGIS say... Jürgen Fischer

02:59 AM Bug report #13071 (Feedback): Editing tools not available with PostGIS layers

I cannot confirm, here all the editing tools are accessible on PostGIS layers without a primary key (tested on 2.8.2,... Giovanni Manghi

02:59 AM Bug report #13071 (Feedback): Editing tools not available with PostGIS layers

I cannot confirm, here all the editing tools are accessible on PostGIS layers without a primary key (tested on 2.8.2,... Giovanni Manghi

02:35 AM Bug report #13075: Opening field calculator eats up all CPU

not reproducable on 2.10 and master (both Linux and Windows). Lowering priority as it is likely a local issue. Giovanni Manghi

2015-07-05

01:53 AM Bug report #6701 (Closed): Browser d&d into a postgis schema other then "public" does not work

Giovanni Manghi

01:45 AM Bug report #13077 (Closed): qgis segmentation fault stylemanager

After click on marker symbol in stylemanager QGIS crash with a segmentation fault.
I test it under Opensuse 13.2. Holger Naumann

01:39 AM Bug report #13075: Opening field calculator eats up all CPU

Nothing. Anything else I can do to debug it? Paolo Cavallini

01:35 AM Bug report #13075: Opening field calculator eats up all CPU

Can't confirm here too. Nothing in the debug log? Nathan Woodrow

01:15 AM Bug report #13075: Opening field calculator eats up all CPU

It seems independent from the specific shp. Just tested on a clean --configpath, no plugins, with the supersimple att... Paolo Cavallini

01:05 AM Bug report #13075 (Feedback): Opening field calculator eats up all CPU

not reproducable on master - steps to not reproduce open airports.shp from qgis sample dataset and click on "open fie... Jürgen Fischer

12:31 AM Bug report #13075 (Closed): Opening field calculator eats up all CPU

Opening the field calc, either from the main toolbar or from the table view, takes almosta a minute here, even for sa... Paolo Cavallini

01:11 AM Bug report #13071: Editing tools not available with PostGIS layers

And here comes more from QGIS... Michal Zimmermann

01:07 AM Bug report #13071: Editing tools not available with PostGIS layers

Thanks that works, QGIS crashes when tries to save the changes though. All the PostGIS says is:
2015-07-06 10:04:51 ... Michal Zimmermann

12:59 AM Bug report #13071: Editing tools not available with PostGIS layers

You must have a primarykey defined for the layer. In the previous release, it was not necessary for editing PostGIS l... Edward H

12:38 AM Feature request #13076 (Closed): Case insensitive filtering of field names in expressions

IMHO the filtering on the field names in expression should always be case insensitive, as most users would expect. Paolo Cavallini

10:48 PM Bug report #13072 (Closed): GRASS 7/Processing stopped to work with Processing 2.10.1

I've got QGIS 2.10.0 compiled on linux 64bit with the following cmake options:
@ -DWITH_GRASS7=ON \\
-DGRASS_... Donovan Cameron

11:12 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

Hi Nyall
That makes sense to add the 'Z' to the Polygon in 3D. I guess I don't normally use the 'Z' because I usuall... Casper Børgesen

11:12 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

Hi Nyall
That makes sense to add the 'Z' to the Polygon in 3D. I guess I don't normally use the 'Z' because I usuall... Casper Børgesen

2015-07-04

11:52 AM Bug report #13071 (Closed): Editing tools not available with PostGIS layers

2.10 doesn't allow to edit PostGIS layers with other tool than split features. I am both the owner of the database an... Michal Zimmermann

04:07 AM Bug report #13059 (Closed): Indents in scratch.py written by 2.10 causes IndentationError in 2.8....

Fixed in changeset commit:"fbad68075b71e29c3384f63f1bbb3593d61d6853". Nathan Woodrow

2015-07-03

08:10 PM Bug report #13055 (Closed): WKT Parser seems to be unable to parse polygons with Z values

That's not valid WKT. It should be "PolygonZ((0 0 0, 0 1 0, 1 1 0, 0 0 0))". The following code snippet works:... Nyall Dawson

08:10 PM Bug report #13055 (Closed): WKT Parser seems to be unable to parse polygons with Z values

That's not valid WKT. It should be "PolygonZ((0 0 0, 0 1 0, 1 1 0, 0 0 0))". The following code snippet works:... Nyall Dawson

06:24 PM Bug report #13070 (Closed): "change width" via right-click on styles has stopped working

Fixed in changeset commit:"4bff1e094dc719de6ef452ea149f624488a56a36". Nyall Dawson

11:15 AM Bug report #13070 (Closed): "change width" via right-click on styles has stopped working

When Linux decided to upgrade me to the 2.10 candidate, I could no longer select a bunch of style entries in a symbol... Roy Brander

12:19 PM Bug report #13067 (Closed): The difference tool gives broken results in both 2.10 and 2.11

Fixed in changeset commit:"4fba5ff4937df59e65e7e927f0d94ee6b5818a45". Jürgen Fischer

07:02 AM Bug report #13067: The difference tool gives broken results in both 2.10 and 2.11

Can you check this PR ?
https://github.com/qgis/QGIS/pull/2192 Etienne Trimaille

02:04 AM Bug report #13067: The difference tool gives broken results in both 2.10 and 2.11

This is the second (basic) vector geoprocessing tool we at the moment see also #11986 (not to speak about how slow th... Giovanni Manghi

02:04 AM Bug report #13067: The difference tool gives broken results in both 2.10 and 2.11

This is the second (basic) vector geoprocessing tool we at the moment see also #11986 (not to speak about how slow th... Giovanni Manghi

08:26 AM Bug report #13069 (Closed): Add ring works on first found polygon

When I try add new ring on layer with multiple overlapping features, tool only works on first found feature and ignor... Jakub Kosik

07:52 AM Bug report #13064: DBManager topoviewer should zoom to topology extent when loading in empty map

Well, I pushed to 2.8 branch (so fix will be in 2.8.3) and master (for 2.11) Sandro Santilli

06:31 AM Bug report #13053 (Closed): WKT Parser can't handle multipolygon with spaces

Fixed in changeset commit:"29aaf1bad8d4ce2bd50391b886ea4116c03cf100". Jürgen Fischer

06:20 AM Feature request #13068 (Closed): In Contour extraction, check "Attribute name" by default

In the tool provided in Raster/Extraction/Contour, values of contour lines are not exported by default. The user must... Marie Silvestre

05:56 AM Bug report #6701: Browser d&d into a postgis schema other then "public" does not work

Works here for both 2.8.2 and 2.10.0. Could be closed. Regis Haubourg

02:36 AM Bug report #13066 (Closed): On upgrade from OSXMavericks to Yosemite (regardless of distro!), som...

Please file bugs in the plugin's tracker or notify the authors. Jürgen Fischer

02:36 AM Bug report #13066 (Closed): On upgrade from OSXMavericks to Yosemite (regardless of distro!), som...

Please file bugs in the plugin's tracker or notify the authors. Jürgen Fischer

02:25 AM Bug report #13059: Indents in scratch.py written by 2.10 causes IndentationError in 2.8.2-LTR

Steps to reproduce:
1. Open QGIS 2.10
2. Add a layer.
3. Go to the Field Calculator (this will prompt QGIS to write ... Kristian Evers

2015-07-02

01:47 AM Bug report #13067: The difference tool gives broken results in both 2.10 and 2.11

I can reproduce the issue computing the difference of regions and lakes in our QGIS Alaska sample data. (Difference b... Anita Graser

01:26 AM Bug report #13067 (Closed): The difference tool gives broken results in both 2.10 and 2.11

Running the difference tool (vector menu and processing) in QGIS 2.10 and master gives broken results.
Instead of rem... Etienne Trimaille

01:24 AM Bug report #12897 (Closed): Geopackage: add support in DB Manager

Implemented in commit:8b2bbcd cedric christen

01:24 AM Bug report #12897 (Closed): Geopackage: add support in DB Manager

Implemented in commit:8b2bbcd cedric christen

12:44 AM Bug report #13060: Postgresql materialized view doesn't open

Jürgen Fischer wrote:
> zimirrr leonid wrote:
> > i checked tableoid within my view, it is unique
>
> And output in ... zimirrr leonid

08:56 AM Bug report #13060: Postgresql materialized view doesn't open

zimirrr leonid wrote:
> i checked tableoid within my view, it is unique
And output in the log that has more informat... Jürgen Fischer

02:13 AM Bug report #13060: Postgresql materialized view doesn't open

i checked tableoid within my view, it is unique zimirrr leonid

11:19 PM Bug report #12436 (Closed): GRASS vectors can be used as Processing input, but fail

Fixed in changeset commit:"de728743b73541a320f68d087f4402a6d17620f1". Victor Olaya

11:19 PM Feature request #11328 (Closed): Increase the font size in the Modeller and in the Script editor

Fixed in changeset commit:"7d8e188e4d9c3b73cb797cc56ac94eab7e0f32b6". Victor Olaya

11:19 PM Feature request #12541 (Closed): Processing GDAL Rasterize: simplify the interface

Fixed in changeset commit:"12736ac56716c1c0c37b05355f1bc983e5f8add0". Victor Olaya

09:57 PM Bug report #13066 (Closed): On upgrade from OSXMavericks to Yosemite (regardless of distro!), som...

I got a new mac. The old one still works and I wisely stayed away from updating it to Yosemite knowing the issues inv... David Douglas

06:20 PM Bug report #13065 (Closed): WFS 1.0.0 Client requests with a GML component fail against Geoserver...

WFS 1.0.0 Client requests made from QGIS 2.8.1 will fail against Geoserver (tested on 2.7.1) if the request contains ... Jeff G

03:00 PM Bug report #13064: DBManager topoviewer should zoom to topology extent when loading in empty map

Giovanni could we get a 2.8.3 entry in Target Version ? Sandro Santilli

02:58 PM Bug report #13064 (Closed): DBManager topoviewer should zoom to topology extent when loading in e...

Fixed in changeset commit:"b9b6257eb7b6d475c4f9e0a5a540c9267aa87c95". Sandro Santilli

02:04 AM Bug report #13064 (Closed): DBManager topoviewer should zoom to topology extent when loading in e...

When loading a topology in an empty map, the topoviewer DBManager plugin should zoom to the topology extent.
For some... Sandro Santilli

02:20 PM Bug report #13062: DXF Export: problem with some basic shapes

BTW outstanding bugreport :) Jürgen Fischer

12:50 PM Bug report #13062 (Closed): DXF Export: problem with some basic shapes

Fixed in changeset commit:"b28c4847c7d928a3ec34f187bb7429e83a49f6a9". Jürgen Fischer

12:50 PM Bug report #13063 (Closed): DXF Export: data-defined choice of simple markers does not work

Fixed in changeset commit:"b28c4847c7d928a3ec34f187bb7429e83a49f6a9". Jürgen Fischer

04:31 AM Bug report #13063: DXF Export: data-defined choice of simple markers does not work

Actually "basic shapes" are "simple markers". Sorry about the wrong terminology. Andreas Neumann

02:03 AM Bug report #13063 (Closed): DXF Export: data-defined choice of simple markers does not work

In the attached project there is a layer called "Simple Markers Data Defined".
If you export this layer, all symbols... Andreas Neumann

02:05 AM Bug report #12802 (Reopened): invisible topology

So I pushed the fix (for DBManager topoviewer plugin) in both 2.8 branch (target: 2.8.3) and master branch (target: 2... Sandro Santilli

02:01 AM Bug report #12802 (Closed): invisible topology

Fixed in changeset commit:"a4e629b32afcb810a0d8b52b2cce6c3f0973fa61". Sandro Santilli

2015-07-01

01:57 AM Bug report #12802: invisible topology

There's no 2.8.3 choice in the "Target version", how should make sure the fix for this enters 2.8.3 ? Sandro Santilli

01:57 AM Bug report #12802: invisible topology

There's no 2.8.3 choice in the "Target version", how should make sure the fix for this enters 2.8.3 ? Sandro Santilli

01:51 AM Bug report #12802: invisible topology

The provider patch didn't work, so for safety I'll just touch the dbmanager plugin, taking any SRID<=0 in topology.to... Sandro Santilli

01:40 AM Bug report #12802: invisible topology

Now trying patching postgresql provider instead, to assume it's not just SRID=0 that "does not constraint" but also S... Sandro Santilli

01:34 AM Bug report #12802: invisible topology

Sorry, the patch DOES work, only you need to zoom to the layer after loading the topology. Sandro Santilli

01:33 AM Bug report #12802: invisible topology

gah, the patch shows it still fails with this "LayerSource":... Sandro Santilli

01:32 AM Bug report #12802: invisible topology

NOTE: master branch is also affected by this.
I'm testing a fix that only changes the DBManager plugin, reinterpretin... Sandro Santilli

01:27 AM Bug report #12802: invisible topology

Filed a ticket in PostGIS to request it being nicer with clients: https://trac.osgeo.org/postgis/ticket/3192
But it's... Sandro Santilli

01:22 AM Bug report #12802: invisible topology

And this is another working version of the same table, this time loaded via "Add PostGIS Layer" dialog:... Sandro Santilli

01:19 AM Bug report #12802: invisible topology

LayerProperties->General->LayerSource is as follows:
For the broken (not visible) layer:... Sandro Santilli

01:16 AM Bug report #12802: invisible topology

Sorry but I'd call this a blocker. I hadn't tested 2.8.0 or 2.8.1 or 2.8.2 yet, but 2.8 branch has an unusable topovi... Sandro Santilli

01:56 AM Bug report #13062 (Closed): DXF Export: problem with some basic shapes

For a point symbol data it seems like the following basic shapes are not correctly exported:
* equilateral triangle ... Andreas Neumann

01:35 AM Bug report #13061 (Closed): QGIS crashes on close if data was read through GDAL in Python Console

To reproduce start QGIS, run the following in Python Console and then close QGIS:... Radoslaw Guzinski

10:28 AM Bug report #13060 (Feedback): Postgresql materialized view doesn't open

check the message log - 'tableoid' is probably not unique. Jürgen Fischer

08:45 AM Bug report #13060: Postgresql materialized view doesn't open

but it opens layer with DBManager! zimirrr leonid

08:44 AM Bug report #13060 (Closed): Postgresql materialized view doesn't open

I have postgresql postgresql-9.4.4-1-windows-x64 and postgis 2.1.7-1 installed
I created materialized view but qgis d... zimirrr leonid

06:16 AM Bug report #13059 (Closed): Indents in scratch.py written by 2.10 causes IndentationError in 2.8....

This bug presents it self when running two version of QGIS, 2.10.0 and 2.8.2-ltr, on the same computer with the same ... Kristian Evers

04:18 AM Bug report #13058 (Closed): Remove internal OWSlib copy

Curently we maintain an internal, old copy of OWSlib in the MetaSearch plugin (now core). Te lib is more up to date o... Paolo Cavallini

02:40 AM Bug report #13051 (Open): Proportionnal symbol

I would suggest to raise this issues in the developers mailing list because I could not say if the actual implementat... Giovanni Manghi

02:40 AM Bug report #13051 (Open): Proportionnal symbol

I would suggest to raise this issues in the developers mailing list because I could not say if the actual implementat... Giovanni Manghi

02:40 AM Bug report #13051 (Open): Proportionnal symbol

I would suggest to raise this issues in the developers mailing list because I could not say if the actual implementat... Giovanni Manghi

02:40 AM Bug report #13051 (Open): Proportionnal symbol

I would suggest to raise this issues in the developers mailing list because I could not say if the actual implementat... Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:30 AM Bug report #13055: WKT Parser seems to be unable to parse polygons with Z values

assigning to Marco as it seems related to the changes in geometry engine. Giovanni Manghi

02:21 AM Bug report #13055 (Closed): WKT Parser seems to be unable to parse polygons with Z values

Recently I haven’t been able to insert WKT polygons with Z-values.

I have tried the following in the Python console... Casper Børgesen

02:23 AM Bug report #13048 (Closed): WKT Parser seems to be unable to parse polygons with Z values

I have closed this issue due to me supplying a wrong _affected version_. Since I cannot update the affected version, ... Casper Børgesen

02:05 AM Feature request #13054 (Open): ability to create virtual band for raster layers

It'd be very useful for QGIS to be able to create virtual bands for raster layers, similar to virtual columns for vec... Mathieu Pellerin - nIRV

2015-06-30

01:41 AM Bug report #13053: WKT Parser can't handle multipolygon with spaces

it is a regression, in 2.8 all works fine Marco Bernasocchi

01:40 AM Bug report #13053 (Closed): WKT Parser can't handle multipolygon with spaces

Looks like there is an issue is with the new geometry classes - try entering this in the python console:... Marco Bernasocchi

01:07 AM Bug report #13051: Proportionnal symbol

Hi, I trying this morning with the 2.10 version available in OSGEO install and the two problems are still the same Fabien Cerbelaud

12:04 PM Bug report #13051 (Feedback): Proportionnal symbol

2.9.25 is pretty "old", and there have been developments/fixes lately in this area, could you test qgis 2.10 or the n... Giovanni Manghi

12:04 PM Bug report #13051 (Feedback): Proportionnal symbol

2.9.25 is pretty "old", and there have been developments/fixes lately in this area, could you test qgis 2.10 or the n... Giovanni Manghi

02:52 AM Bug report #13051 (Closed): Proportionnal symbol

Hi, I try the nighlty version of QGIS 2.9.25 and I have a problem with the size method in graduate symbol. The size m... Fabien Cerbelaud

11:54 PM Bug report #12948 (Reopened): different SVG extent in composer than in map canvas

In composer, SVG symbols are rendered on their whole extent and not the document extent like in the map canvas.
At le... Denis Rouzaud

11:54 PM Bug report #12948 (Reopened): different SVG extent in composer than in map canvas

In composer, SVG symbols are rendered on their whole extent and not the document extent like in the map canvas.
At le... Denis Rouzaud

11:54 PM Bug report #12948 (Reopened): different SVG extent in composer than in map canvas

In composer, SVG symbols are rendered on their whole extent and not the document extent like in the map canvas.
At le... Denis Rouzaud

10:42 PM Bug report #12978 (Closed): Adding a field after a virtual field does not show correctly

I can confirm, fixed. Thanks. Paolo Cavallini

10:42 PM Bug report #12978 (Closed): Adding a field after a virtual field does not show correctly

I can confirm, fixed. Thanks. Paolo Cavallini

06:04 PM Bug report #13043 (Closed): Custom GRASS location not found, wrong GRASS_PREFIX (6) used

Argh! I'm an idiot. Somehow my custom GRASS build lost its headers. Works now. Sorry for the noise. But I do nee... William Kyngesburye

06:04 PM Bug report #13043 (Closed): Custom GRASS location not found, wrong GRASS_PREFIX (6) used

Argh! I'm an idiot. Somehow my custom GRASS build lost its headers. Works now. Sorry for the noise. But I do nee... William Kyngesburye

01:55 PM Bug report #13044 (Feedback): Qgis Grass Mapset crash QGIS

I cannot confirm, I used qgis 2.8.2 and 2.10 with GRASS64 and the GRASS sample datasets.
What GRASS version are you u... Giovanni Manghi

01:55 PM Bug report #13044 (Feedback): Qgis Grass Mapset crash QGIS

I cannot confirm, I used qgis 2.8.2 and 2.10 with GRASS64 and the GRASS sample datasets.
What GRASS version are you u... Giovanni Manghi

01:55 PM Bug report #13044 (Feedback): Qgis Grass Mapset crash QGIS

I cannot confirm, I used qgis 2.8.2 and 2.10 with GRASS64 and the GRASS sample datasets.
What GRASS version are you u... Giovanni Manghi

01:04 PM Bug report #12933: Heatmap generating an empty raster

David Vanescentes wrote:
> I decided to create a version of the shapefile where there are no points over 72.18 degree... Giovanni Manghi

11:56 AM Bug report #13037 (Feedback): WFS GetCapabilities respons misses <keywords> key

I cannot confirm on qgis server master
<WFS_Capabilities version="1.0.0" updateSequence="0" xsi:schemaLocation="http... Giovanni Manghi

11:56 AM Bug report #13037 (Feedback): WFS GetCapabilities respons misses <keywords> key

I cannot confirm on qgis server master
<WFS_Capabilities version="1.0.0" updateSequence="0" xsi:schemaLocation="http... Giovanni Manghi

11:51 AM Bug report #13040 (Closed): postgresql/postgis slow opening

Giovanni Manghi

11:47 AM Bug report #13048 (Feedback): WKT Parser seems to be unable to parse polygons with Z values

is this a regression? Giovanni Manghi

11:42 AM Feature request #13045: Ability to fix topology error

I agree that having a tool to check for errors and not having one for fixing them (in the same place) is frustrating.... Giovanni Manghi

11:42 AM Feature request #13045: Ability to fix topology error

I agree that having a tool to check for errors and not having one for fixing them (in the same place) is frustrating.... Giovanni Manghi

11:04 AM Feature request #11929: Show feature selection into Composer

Hugo Mercier wrote:
> Hi,
>
> Nyall, Giovanni, could you develop on why this is not a good idea to allow displaying ... Giovanni Manghi

11:01 AM Feature request #13018 (Feedback): Tools of the print composer - atlas

Giovanni Manghi

10:55 AM Bug report #13046 (Closed): Grass tools button (GRASS plugin) does not work

Giovanni Manghi

10:52 AM Bug report #13052: Problem with reshape

Confirmed on master too.
Actually it is like this: if you the tool once then it has no effect (even after saving), i... Giovanni Manghi

10:52 AM Bug report #13052: Problem with reshape

Confirmed on master too.
Actually it is like this: if you the tool once then it has no effect (even after saving), i... Giovanni Manghi

08:54 AM Bug report #13052 (Closed): Problem with reshape

The reshape tool stopped working with either lines and polygons in version 2.10. After you perform the operation, the... Philipe Borba

04:54 AM Bug report #12507 (Closed): Browser connections issues in master

Fixed in changeset commit:"129be681b079a5876656264b196ab86e2ff7f659". Jürgen Fischer

04:34 AM Bug report #12987: Values not updating properly when editing attribute table

Possibly related to commit:cc13c57. That fix only applies to 2.10 though, not 2.8. Nyall Dawson

03:44 AM Bug report #12987: Values not updating properly when editing attribute table

Hi,
I confirm this on 2.10 and master, on windows (OSGeo4W 64bits). It happens both with Field Calculator and normal... Pedro Venâncio

02:23 AM Feature request #12109: Difference from 2 polygon in the same layer

Hi More generally I have users askling for interactive tools inside the edited layer with classical intersect / buffe... Regis Haubourg

02:21 AM Feature request #13050 (Open): Add interactive editing tools using spatial operators (difference,...

We have users here missing some very handy Mapinfo digitizing tools. Those tools allow to modify features inside the ... Regis Haubourg

2015-06-29

11:56 PM Bug report #13029 (Closed): qgis crash

Closed due to no feedback. Saber Razmjooei

11:31 PM Bug report #13048 (Closed): WKT Parser seems to be unable to parse polygons with Z values

Recently I haven’t been able to insert WKT polygons with Z-values.

I have tried the following in the Python console... Casper Børgesen

10:55 AM Feature request #8201: Enhance disabling/enabling toolbars (and panels)

Hi Bernd,
please have a look here: https://github.com/qgis/QGIS/pull/2180 and comment on the question if you want Richard Duivenvoorde

09:22 AM Bug report #12421 (Closed): QGIS form : range with decimal > rounding by saving project ?

Fixed in changeset commit:"2bd5b89319118d19692e16f93bd3942c99d827a9". Jürgen Fischer

05:34 AM Bug report #12421 (Reopened): QGIS form : range with decimal > rounding by saving project ?

Hi, I just tried the stable release and the problem does not seem to be fully fixed.
Now it is no longer possible to... Stefan Blumentrath

08:49 AM Bug report #13046: Grass tools button (GRASS plugin) does not work

False alarm.
After a restart the issue was no longer there. andre mano

08:45 AM Bug report #13046 (Closed): Grass tools button (GRASS plugin) does not work

After opening an existing mapset the 'open GRASS tools' button does not lead to the expected interface - nothing happ... andre mano

07:27 AM Feature request #11929: Show feature selection into Composer

Hi,
Nyall, Giovanni, could you develop on why this is not a good idea to allow displaying the current selection in a... Hugo Mercier

06:34 AM Bug report #13005: QgsOracleFeatureIterator: returns all features if layer has no index

working fine in latest nightly.
thanks for the fix !
Frank
Frank Dekervel

03:23 AM Feature request #13018: Tools of the print composer - atlas

There is already a feature action called "Set as atlas feature for". When selecting a feature of the coverage layer o... Hugo Mercier

02:27 AM Bug report #13043: Custom GRASS location not found, wrong GRASS_PREFIX (6) used

Sorry for the troubles. I have also GRASS 6 and 7 in custom paths and configure can find them, tested on Linux and Wi... Radim Blazek

2015-06-28

01:47 AM Feature request #13045 (Closed): Ability to fix topology error

the only tool that exist and works in QGIS without needing a masters degree to setup is Topology Checker, that is use... baditaflorin -

01:34 AM Bug report #13044 (Closed): Qgis Grass Mapset crash QGIS

... baditaflorin -

02:58 PM Bug report #13043: Custom GRASS location not found, wrong GRASS_PREFIX (6) used

Ugh, and somehow it's still linking the GRASS.app libraries. So it's not using any prefix I set to find the GRASS li... William Kyngesburye

10:47 AM Bug report #13043 (Closed): Custom GRASS location not found, wrong GRASS_PREFIX (6) used

This is a combination of an old issue and the recent split GRASS 6/7 build mechanism.
When configuring QGIS for GRAS... William Kyngesburye

2015-06-26

01:50 AM Bug report #6702 (Closed): empty postgis schemas do not show in browser

Works OK in master (since 2.8 I think) Nyall Dawson

01:50 AM Bug report #6702 (Closed): empty postgis schemas do not show in browser

Works OK in master (since 2.8 I think) Nyall Dawson

09:03 AM Bug report #13041 (Closed): Processing Toolbox Doesn't Pick Up New Database Connections

The processing toolbox seems to build its cache of available PostGIS connections when QGIS is loaded and the cache is... Spencer Gardner

07:57 AM Bug report #13040: postgresql/postgis slow opening

users gp5st and @jef, on irc channel, gave me advise to add some parameters in my qgs file
i added to all <datasource... zimirrr leonid

06:40 AM Bug report #13040 (Closed): postgresql/postgis slow opening

hello
i have done some testing-logging and there is some questions.
i have a qgis(2.8.2 WIN7) project with >50 tables... zimirrr leonid

07:56 AM Bug report #8572 (Closed): PostGIS Geography Type, ERROR: Invalid geography

Fixed in changeset commit:"90b3efb93dd0b6460ce496a8acd7fcbf34b22f63". Jürgen Fischer

04:19 AM Bug report #8572: PostGIS Geography Type, ERROR: Invalid geography

This still happens with 2.6.1. I'm surprised the priority is so low given it makes QGIS useless with many PostGIS dat... Jonathan Moules

06:34 AM Feature request #13039 (Open): SQL Query User Library

I like QGIS's current feature that allows a user to store SQL within a QGIS project, but it would it be even better t... Mitchell Weier

05:20 AM Bug report #12171 (Feedback): Processing Refactor fields: can't change an "int" field to "double"...

IS this a Processing issue or a QGIS one? Processing just passes the precision value to the QgsField object, and it s... Victor Olaya

05:01 AM Bug report #12340 (Closed): using --configpath on new empty dir raises Python error + subsequest ...

Yep. Seems it was close to what you had too. Sorry I didn't even check. Nathan Woodrow

04:49 AM Bug report #12340: using --configpath on new empty dir raises Python error + subsequest segfault

@nathan:
is commit:2112128 the final fix? So we can close this one?
Richard Duivenvoorde

03:43 AM Bug report #12807 (Closed): ParameterTableField : can't see all the fields which contains an integer

Fixed in changeset commit:"ae7f180c096bb3d5dc21c8e4b2529d979536b32e". Victor Olaya

03:01 AM Bug report #12515 (Closed): Missing connection error not handled properly when downloading models

Fixed in changeset commit:"38d598008ec9cdb12949f78daac05c80db1ecc05". Victor Olaya

03:01 AM Bug report #12511 (Closed): Allow selecting either a directory or a file in the processing settings

Fixed in changeset commit:"b80a1bcac5659417c6fb05f47249fa0992410469". Victor Olaya

2015-06-25

01:58 AM Feature request #13038 (Open): Add ability to choose field type in CSV plugin provider import

Hi,
when importing CSV, we often have text identifiers that are similar to numerics, ie: "09123". CSV plugin auto t... Regis Haubourg

01:04 AM Bug report #13005 (Closed): QgsOracleFeatureIterator: returns all features if layer has no index

Fixed in changeset commit:"318137ae5649bb270613287804beb8e0fbab591f". Jürgen Fischer

11:50 PM Bug report #13005 (Reopened): QgsOracleFeatureIterator: returns all features if layer has no index

hello,
i think i found the cause why it isn't working yet. inside the "if" you changed in commit:dfc2cf0, there is a... Frank Dekervel

12:38 AM Bug report #13010 (Closed): Processing: Export/Add geometry columns silently fails to overwrite e...

Fixed in changeset commit:"8a541823e57aed73486dff32e344c01e334f7d67". Victor Olaya

10:12 PM Bug report #12928: Using form view to edit data, changes the attribute that uses Date/Time widget...

Hi Giovanni
My boss is away for another 2 weeks. I need permission. Will provide some sample data and project when I ... Nhung Seidensticker

05:59 PM Bug report #13033 (Closed): Data defined settings at root Marker are copied to child Symbol Layer...

Fixed in changeset commit:"cb104f0fcbd8e88356c2f8303748a1a525db6b15". Vincent Mora

09:55 AM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

And this one is to keep size/angle expressions when subsymbol changes https://github.com/qgis/QGIS/pull/2167 Vincent Mora

08:28 AM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

PR is here https://github.com/qgis/QGIS/pull/2166 Vincent Mora

07:36 AM Bug report #12802 (Reopened): invisible topology

Actually, I'm still seeing it, on both 2.8 and master.
Pretty easy to reproduce. Just load POSTGIS_SOURCE_TREE/topolo... Sandro Santilli

07:36 AM Bug report #12802 (Reopened): invisible topology

Actually, I'm still seeing it, on both 2.8 and master.
Pretty easy to reproduce. Just load POSTGIS_SOURCE_TREE/topolo... Sandro Santilli

2015-06-24

10:07 PM Bug report #12933: Heatmap generating an empty raster

I decided to create a version of the shapefile where there are no points over 72.18 degrees latitude (moved those poi... David Vanescentes

10:52 AM Bug report #12933: Heatmap generating an empty raster

After I posted that last post I thought about it and I have a theory as to why your image (points.png) shows the poin... David Vanescentes

09:07 AM Bug report #12933: Heatmap generating an empty raster

I think you might not be aligning that bing picture correctly or maybe something else is going awry with how you are ... David Vanescentes

08:25 AM Bug report #12933: Heatmap generating an empty raster

David Vanescentes wrote:
> I really don't think this issue is due to quirks in this specific dataset (other than its ... Giovanni Manghi

08:15 AM Bug report #12933: Heatmap generating an empty raster

I really don't think this issue is due to quirks in this specific dataset (other than its size maybe) so I think it i... David Vanescentes

11:59 AM Bug report #13037 (Closed): WFS GetCapabilities respons misses <keywords> key

When you request getCapabilities to QGIS-server es. http://x.x.x.x/cgi-bin/qgis_mapserv.fcgi?map=myproject.qgs&servic... Michele Giordano

09:09 AM Bug report #12478 (Closed): Estimated extent of PostGIS layers with mixed case names

Fixed in changeset commit:"048aff01bb9cf42e2c1c17eb0ddbd81537443e19". Jürgen Fischer

05:29 AM Bug report #12800: Copy/paste a command line from the Processing history into the python console ...

PR already merged
Thanks! Victor Olaya

02:39 AM Bug report #12800: Copy/paste a command line from the Processing history into the python console ...

Thanks.
However, I can't run any model from the processing dock now.
Launching a model from my plugin also :... Etienne Trimaille

04:23 AM Feature request #13036 (Feedback): Improve handling of homonymous field names in table joins

please try qgis master and report back. Thanks. Giovanni Manghi

04:23 AM Feature request #13036 (Feedback): Improve handling of homonymous field names in table joins

please try qgis master and report back. Thanks. Giovanni Manghi

04:10 AM Feature request #13036: Improve handling of homonymous field names in table joins

This issue might be related to #10244 (can't verify since no sample data was provided)
Also, #3633 suggested somethin... Konstantin Greger

04:06 AM Feature request #13036 (Closed): Improve handling of homonymous field names in table joins

When joinig two tables that contain fields wit identical names (apart from the field used for the join) the handling ... Konstantin Greger

03:52 AM Bug report #11627 (Closed): uncheck "case sensitive" in legend filter

Fixed in changeset commit:"433e87df148811b5efc9cc123978c0f3aae19ded". Nyall Dawson

03:49 AM Bug report #12546 (Closed): Rotate tool not availlable when using rules and svg symbology

Duplicate of #12123 Nyall Dawson

03:49 AM Bug report #12546 (Closed): Rotate tool not availlable when using rules and svg symbology

Duplicate of #12123 Nyall Dawson

03:44 AM Bug report #12475 (Closed): Print layout unsuitable for small screens

Duplicate of #11633 Nyall Dawson

03:44 AM Bug report #12475 (Closed): Print layout unsuitable for small screens

Duplicate of #11633 Nyall Dawson

03:34 AM Bug report #12330 (Feedback): Incorrect rendering of Indic Kannadad script in map canvas

Is this using curved labels? If so, can you please retest with master and confirm that this is still an issue (it sho... Nyall Dawson

03:28 AM Bug report #12978 (Feedback): Adding a field after a virtual field does not show correctly

Can you confirm if this has been fixed in master? I believe a related change should have fixed this. Nyall Dawson

03:09 AM Bug report #12888 (Closed): Symbol with data-defined size that evaluate to NULL are drawn

Fixed in changeset commit:"4fb22b4ef6daccdca163c696b16c950afc3c93b9". Vincent Mora

2015-06-23

01:12 AM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

>If you want to control the symbols sizes independently, you can still do that, we could add the assistant at the sym... Nyall Dawson

01:07 AM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

Hi,
IMO if you are at the higher level, you want to control all thinks below, so I'm not fond of a lock below.
If ... Vincent Mora

02:38 PM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

I originally thought the same (in fact, I got part way through coding it this way) but hit an issue.
Imagine the fol... Nyall Dawson

01:54 PM Bug report #13033: Data defined settings at root Marker are copied to child Symbol Layer items

Hi, putting Nyall in the list, he reviewed the code from Vincent Mora (I funded that feature).
In fact, old impleme... Regis Haubourg

08:54 AM Bug report #13033 (Closed): Data defined settings at root Marker are copied to child Symbol Layer...

Hi !
Steps :
While looking at #12769 I found that there's a problem in Symbol's data-defined properties such as siz... Olivier Dalang

01:16 PM Bug report #12730 (Closed): "Check Geometry Validity" produces incorrect result

Fixed in changeset commit:"3eef29ab1bd4cc007b7db5012dad23d9c39e2249". Jürgen Fischer

07:32 AM Bug report #12730: "Check Geometry Validity" produces incorrect result

Related to https://github.com/qgis/QGIS-Documentation/issues/472 Daniel Baston

11:13 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

duplicate of #11296
Jürgen Fischer

11:13 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

duplicate of #11296
Jürgen Fischer

11:13 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

duplicate of #11296
Jürgen Fischer

11:13 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

duplicate of #11296
Jürgen Fischer

11:13 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

duplicate of #11296
Jürgen Fischer

11:06 AM Bug report #13035 (Closed): Shape Vertices Deleted by QGIS are Still Visable by Other Shapefile V...

I used the QGIS2.8.1 node editing tool to delete several vertices of a shapefile (to remove a small peninsula), then ... Marc Hurst

10:34 AM Bug report #13034 (Closed): Cannot render script as parent algorithm in Graphical Modeler

When working in the Processing modeler, if I set the parent algorithm of anything to a script, I get a QT error. Clos... Dalen Brauner

09:18 AM Bug report #12802 (Closed): invisible topology

can't reproduce, dunno what happened. Sandro Santilli

09:18 AM Bug report #12802 (Closed): invisible topology

can't reproduce, dunno what happened. Sandro Santilli

08:42 AM Bug report #13032 (Closed): Save as... fails to populate fields if layer has similar names only d...

When using "save as..." in a layer, the tool fails to fill all fields values correctly if there are columns with simi... Alexandre Neto

08:36 AM Feature request #12769: Data defined opacity for vector features

@Karolina do you have an idea when you'd be able to work on this ? I had a look at the source, unfortunately it seems... Olivier Dalang

08:09 AM Bug report #10522 (Closed): Data-defined symbology not working with field names that are valid ex...

Indeed, this is fixed in master. Martin Dobias

08:09 AM Bug report #10522 (Closed): Data-defined symbology not working with field names that are valid ex...

Indeed, this is fixed in master. Martin Dobias

06:57 AM Feature request #13031 (Open): map extent

Select the map extent should be available for all the processing tools and not only for some. Perhaps it is worth thi... ilaria marengo

06:35 AM Bug report #13011 (Closed): CRS not ok between switching between projects with different crs

Fixed in changeset commit:"fd4b38c55a368d7a04888d785fc873ca86528150". Jürgen Fischer

05:18 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

Thanks for your work, I will test it in my master version asap.
Victor Olaya wrote:
> Fixed in changeset commit:"38a... Nicolas Rochard

05:16 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

Paolo's error is casused by trying to running the buffer with an empty layer. I will fix that separately, to handle t... Victor Olaya

05:15 AM Bug report #12894 (Closed): Processing: memory layers saved using QGIS tools have all attributes ...

Fixed in changeset commit:"38a247f26cc4e0d23ae01cc48b2590a41968ad5a". Victor Olaya

04:50 AM Bug report #10828 (Open): project loading and adding/removing layers is slow if project has compo...

Saber Razmjooei

02:36 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

You must have a really fast computer then. I'm running QGIS on a quad core 2.40 GHz, 4 GB ram. With 30 layouts, it ta... Per Gammerath

02:26 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

With 22 print layouts it loads in ~10 seconds for me now. With this no. of layout, I'd say it is acceptable! Saber Razmjooei

04:32 AM Bug report #6379 (Closed): HTML output does not work for Processing/GRASS modules

Fixed in changeset commit:"a842d475126d3dd368f7af45278015420149a1ae". Victor Olaya

04:17 AM Bug report #12793: Minidump when adding a layer (vector, raster, etc.)

Hi,
I just tried adding layers from the browser on Win7, 64bit. I tested versions 2.8.2, 2.8 nightly and master. All... Andreas Neumann

03:05 AM Bug report #12740 (Feedback): Algorithms sometimes disappear from the toolbox

Not able to reproduce this in Win, but it fails most of the time (althoug not always)in Mac, raising an IOError if sa... Victor Olaya

02:29 AM Bug report #13029 (Feedback): qgis crash

Does QGIS crash after running qgis2web plugin?
If so, please file a ticket on the plugin bug tracker. Saber Razmjooei

2015-06-22

01:49 AM Bug report #13029 (Closed): qgis crash

with qgis:
Installato: 1:2.9.0+git20150621+cb7f9b4+20trusty-ubuntugis
Candidato: 1:2.9.0+git20150621+cb7f9b4+20t... Marco Braida

01:39 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

Try this map Per Gammerath

01:36 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

On my computer, there is a 11 seconds difference. To emphasize the problem, try and the duplicate layouts, and you wi... Per Gammerath

01:31 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

It opens and saves pretty much instantly for wihtout layout.qgs and a couple of seconds with layout.qgs project on my... Saber Razmjooei

01:26 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers

Try this these projects Per Gammerath

12:50 AM Bug report #10828 (Feedback): project loading and adding/removing layers is slow if project has c...

Do you have some sample projects with data? Saber Razmjooei

12:50 AM Bug report #10828 (Feedback): project loading and adding/removing layers is slow if project has c...

Do you have some sample projects with data? Saber Razmjooei

12:28 AM Bug report #10828 (Reopened): project loading and adding/removing layers is slow if project has c...

I've just downloaded and tested QGIS 2.8, and it strikes me that the issue with slow loading still exists, though the... Per Gammerath

12:12 AM Bug report #12800 (Closed): Copy/paste a command line from the Processing history into the python...

This should be fixed now. It will work even if the database table is not open in QGIS as a layer
Notice that the log... Victor Olaya

11:55 PM Bug report #12578: Large pause before snapping to large layer

The problem is in 2.10 for sure. See Martin's email (2nd in the thread) regarding the new geometry engine and snappin... Saber Razmjooei

09:39 PM Bug report #13020 (Closed): Snapping on intersection fails

Fixed in changeset commit:"f29b55a08c346e583bf69007c4234d5116a11528". Martin Dobias

04:02 AM Bug report #13020 (Open): Snapping on intersection fails

Confirmed in Windows and Debian. Saber Razmjooei

04:02 AM Bug report #13020 (Open): Snapping on intersection fails

Confirmed in Windows and Debian. Saber Razmjooei

04:02 AM Bug report #13020 (Open): Snapping on intersection fails

Confirmed in Windows and Debian. Saber Razmjooei

03:57 AM Bug report #13020: Snapping on intersection fails

In QGIS 2.8.2 (Ubuntu 14.04) snapping on intersection is working properly. Paul Kanelli

06:24 PM Bug report #13028 (Closed): SVG Symbols in Master on Ubuntu

Created a project in Master on Ubuntu 14.04 - SVG symbols are almost all white with some random ones being black - so... Randal Hale

04:00 PM Bug report #13026 (Closed): Wrong German translation in Rastermenu

Jürgen Fischer

06:25 AM Bug report #13026 (Closed): Wrong German translation in Rastermenu

"RGB nach PCT" is duplicate see screenshot
Jan Lippmann

03:11 PM Bug report #13024 (Closed): Can't edit ESRI .gdb file

The filegdb driver is optional - on OSGeo4W the driver is available as package @gdal-filegdb@ (see also #12045). Jürgen Fischer

03:11 PM Bug report #13024 (Closed): Can't edit ESRI .gdb file

The filegdb driver is optional - on OSGeo4W the driver is available as package @gdal-filegdb@ (see also #12045). Jürgen Fischer

06:36 AM Bug report #13024: Can't edit ESRI .gdb file

+additional:+
WIN 7
*no ESRI-FileGDB Driver available with:* ... Jan Lippmann

05:42 AM Bug report #13024: Can't edit ESRI .gdb file

Is it possible to use *ESRI-FileGDB Driver* in QGis 2.8.2.? Joze Stih

05:37 AM Bug report #13024: Can't edit ESRI .gdb file

Jan Lippmann wrote:
> -in qgis 2.8.2 is no *ESRI-FileGDB Driver* available
> -in qgis 2.8.2 is only *OpenFileGDB Driv... Jürgen Fischer

05:20 AM Bug report #13024: Can't edit ESRI .gdb file

do you use ESRI-FileGDB Driver or OpenFileGDB Driver?
-with *ESRI-FileGDB Driver* i can edit features in the actual ... Jan Lippmann

03:59 AM Bug report #13024 (Closed): Can't edit ESRI .gdb file

I can't edit ESRI .gdb file layers in QGis 2.8.2. becouse "Start Edit" button is grey. In QGis 2.6.1 (and older) it i... Joze Stih

02:29 PM Bug report #12933: Heatmap generating an empty raster

I am not sure what you mean when you said some points in the dataset were too far north. I randomized the dataset wi... David Vanescentes

09:44 AM Bug report #12522: Raster layers sometimes not painted when zooming (>=2.4)

I think I've found something that might help in narrowing down the issue. Based on some googling on the QT graphics ... Luke Roth

08:40 AM Feature request #13017: Graduated Size can be disabled by previous settings

Noted! Not a bug, but still a feature request, because I think it's a bit unintuitive.
The Data Defined Override but... Klas Karlsson

08:40 AM Feature request #13017: Graduated Size can be disabled by previous settings

Noted! Not a bug, but still a feature request, because I think it's a bit unintuitive.
The Data Defined Override but... Klas Karlsson

02:17 AM Feature request #13017: Graduated Size can be disabled by previous settings

You can select all the classes and right click -> change size. That allows you to remove the data defined size Nyall Dawson

07:52 AM Bug report #12766 (Closed): modeller: number used to define a default for a parameter (from a lis...

Fixed in changeset commit:"78359ec510ce222a03d1d98351f241d8f11bbf8b". Victor Olaya

07:18 AM Bug report #13027 (Closed): Join by location does not work when layers have equivalent filed names

Join by location, both in the ftools and processing, are not working as expect when the join and target layers have f... Alexandre Neto

07:16 AM Bug report #13019 (Closed): Raster Style Single band PseudoColor Continuous

I close the ticket, but if after correcting the color ramp, it still gives you wrong extents, feel free to re-open. Saber Razmjooei

07:06 AM Bug report #13019: Raster Style Single band PseudoColor Continuous

You were right about the color ramp. But it is a standard. I was helping a new student today. She had the same issue ... Lene Fischer

07:02 AM Bug report #13019: Raster Style Single band PseudoColor Continuous

It works fine for me.
Could it be a problem related to your color ramp?
Saber Razmjooei

06:51 AM Bug report #13019: Raster Style Single band PseudoColor Continuous

See video on http://screencast.com/t/CDixGe7FD
Lene Fischer

06:46 AM Bug report #13019 (Feedback): Raster Style Single band PseudoColor Continuous

Hi Lene,
Have you got some sample raster file. It works as expected on mine. Saber Razmjooei

06:46 AM Bug report #13019 (Feedback): Raster Style Single band PseudoColor Continuous

Hi Lene,
Have you got some sample raster file. It works as expected on mine. Saber Razmjooei

06:51 AM Bug report #13025: trying to compil an application using qgis 1.8 with the 2.8

Problem with Build/Install is related to:
https://github.com/qgis/QGIS
and the instruction provided here:
https://git... Saber Razmjooei

06:46 AM Bug report #13025: trying to compil an application using qgis 1.8 with the 2.8

here is some more information
same problem on the header file :
qgsrenderer.h, qgssymbologyutils.h, and qgssinglesymb... florent florent

06:44 AM Bug report #13025 (Closed): trying to compil an application using qgis 1.8 with the 2.8

Hello Florent,
This is not a bug with QGIS. With any software update you expect some changes (see for example: https... Saber Razmjooei

05:55 AM Bug report #13025 (Closed): trying to compil an application using qgis 1.8 with the 2.8

hello
i have an old project that use the 1.8 library of qgis under ubuntu
we need to upgrade the system and the appli... florent florent

05:18 AM Bug report #4602 (Closed): Georeferencer PDF report

Fixed in changeset commit:"f037b11f8e99633b0b5ec953e688d9232a5429f1". Nyall Dawson

04:05 AM Bug report #13023 (Closed): http://plugins.qgis.org/ IS DOWN

Saber Razmjooei

03:31 AM Bug report #13023 (Closed): http://plugins.qgis.org/ IS DOWN

http://plugins.qgis.org/ is down, so no Plugins can be loaded at the moment.
There should be a server-side automatic ... dr Geo

03:57 AM Bug report #12706 (Closed): Batch in Processing: wrong column width

Fixed in changeset commit:"b4edf8af889ac55354da74c4e6b5e79dfddb7ada". Victor Olaya

03:03 AM Feature request #7967: Modeler: Output of a tool is not graphically used as the input of the next...

Ok, I'm changing it to a feature request then. Filipe Dias

02:50 AM Feature request #7967 (Feedback): Modeler: Output of a tool is not graphically used as the input ...

This is not a bug, it is intentional. The output element in the canvas just represents that the algorithm output is g... Victor Olaya

02:50 AM Feature request #7967 (Feedback): Modeler: Output of a tool is not graphically used as the input ...

This is not a bug, it is intentional. The output element in the canvas just represents that the algorithm output is g... Victor Olaya

02:57 AM Bug report #13005: QgsOracleFeatureIterator: returns all features if layer has no index

i tried nightly of today (61d81f0), and it doesn't seem to be solved: qgis still selects all the features when i try ... Frank Dekervel

02:41 AM Bug report #10794 (Closed): Processing: Lines disappearing in Modeler

This is fixed already. I am closing it Victor Olaya

02:38 AM Bug report #12773 (Closed): processing uses polyg style for lines and points

Fixed in changeset commit:"5d4928fae2969f9a212e70dcd2adf2d9fd213369". Victor Olaya

02:25 AM Bug report #12420 (Closed): Tools not available in simplified interface

The simplified interface is not suppossed to contain all available algorithm. IT shows a different organization, but ... Victor Olaya

02:05 AM Bug report #13022 (Closed): ELSE expression symbol used when other rules are set invisible in the...

Using the rule-based symbols with several rules and an ELSE expression, If you, in the map canvas legend, set a rule ... Alexandre Neto

2015-06-21

01:35 AM Feature request #13021 (Closed): HTML labelling in map window

It would be great to be able to use HTML rendering for map labels. This is already supported in composer and the expr... Jochen Huber

01:28 AM Bug report #12690: Snapping do not work for new features after save edits on oracle spatial layer

The problem is solved.
Thank You Jürgen Jan Lippmann

01:12 AM Bug report #12902 (Closed): Opening a model from file throws an error

Fixed in changeset commit:"b6975d61214a9383c220787bbd65f7628613f68e". Victor Olaya

01:02 AM Bug report #12898 (Closed): Processing: Field calculator requires an output file name

fixed in commit:5013bb5 Victor Olaya

12:37 AM Bug report #13020 (Feedback): Snapping on intersection fails

Could you check if it works in QGIS 2.8? Saber Razmjooei

12:33 AM Bug report #13020 (Closed): Snapping on intersection fails

Snapping on intersection isn't working. I've tested differnt types of geometries and layers. "Enable snapping on inte... Paul Kanelli

12:35 AM Bug report #8853 (Feedback): Parameter "-GRIDS" is not passed in SAGA "Grid Calculator", but just...

Grid calculator is working fine now. Should we close this ticket? Victor Olaya

12:28 AM Bug report #11976 (Closed): qgis:grid parameter order changed breaking dependent scripts

I guess it's fine if the scripts in the repo are fixed. I hope this kind of issue does not happen on a regular basis. Anita Graser

10:51 PM Bug report #11976: qgis:grid parameter order changed breaking dependent scripts

Not sure we should still consider this a problem
The change was a minor API break, but it was already sometime ago a... Victor Olaya

12:28 AM Bug report #8772 (Closed): Deactivating a module in Modeler has no effect after the save and clos...

This is no longer true. Since the modeler was rewritten, the enabled/disabled state of algorithm is kept in the model... Victor Olaya

12:25 AM Bug report #10264 (Closed): Geojson/Sqlite/Mbtiles extensions not correctly picked from file sele...

Fixed in changeset commit:"1579a68b13b4f69f48620b16eac3dff309ac3ff4". Victor Olaya

12:11 AM Bug report #10735 (Closed): SAGA GDAL export fails when format plugins installed

Fixed in changeset commit:"32d6275fa3514f4bdea61ea4919c36c47537402e". Victor Olaya

11:58 PM Bug report #9818: Crash when launching globe

For QGIS 2.8, installing openscenegraph-plugin-osgearth on Ubuntu does not fix the issue for me anymore. Clicking the... Anita Graser

10:47 PM Bug report #12905 (Closed): processing: output in formats different from default (shp/tif) do not...

fixed in commit:a135164 and commit:83782cc Victor Olaya

10:31 PM Feature request #13017: Graduated Size can be disabled by previous settings

I think it is, when the override cancels settings in another branch of the styling. You get no option to fix it from ... Klas Karlsson

03:56 PM Feature request #13017: Graduated Size can be disabled by previous settings

Is this a bug? Data defined settings are intended to always override any other settings... Nyall Dawson

01:22 PM Feature request #13017 (Open): Graduated Size can be disabled by previous settings

If you have a point layer and first use a single symbol style, +with+ a data defined override as size, you need to cl... Klas Karlsson

10:29 PM Bug report #13019: Raster Style Single band PseudoColor Continuous

Same in 2.6 to 2.10 Lene Fischer

10:29 PM Bug report #13019 (Closed): Raster Style Single band PseudoColor Continuous

Hi
When styling a raster from Singleband Gray to Singleband Pseudocolor I choose Continuous and click Classify.
The r... Lene Fischer

02:30 PM Feature request #13018 (Closed): Tools of the print composer - atlas

For those who use atlas and wants to print only a record in large data sets, I think it's useful to be able to choose... Antonio chianese

07:36 AM Bug report #13013 (Closed): Custom function accepted in 2.8 is invalid in Master

Thank you, Salvatore. I didn't see that change. Harrissou Santanna

06:56 AM Bug report #13013: Custom function accepted in 2.8 is invalid in Master

it is occurring because you are running the function from Recent list which has stored it with the $ char in 2.8 vers... Salvatore Larosa

04:46 AM Feature request #8388 (Closed): Georeferencer - allow to disable automatic reducing

Fixed in changeset commit:"9041950fbcdb01dd667653bc5e04d9b4f144e79b". Nyall Dawson

04:46 AM Bug report #10018 (Closed): Georeferencer: does not load a georef file into main canvas if "Creat...

Fixed in changeset commit:"759d85a2f2d831c8749d9087d0ec7d1ae1550aa0". Nyall Dawson

04:46 AM Bug report #7429 (Closed): georeferencer creates the world file without any message

Fixed in changeset commit:"759d85a2f2d831c8749d9087d0ec7d1ae1550aa0". Nyall Dawson

04:46 AM Bug report #3804 (Closed): Georeferencer deletes active raster

Fixed in changeset commit:"f3d032a32c919aa4b267973721dd38dff6a90603". Nyall Dawson

04:45 AM Bug report #6215 (Closed): Georeference has no way to remove currently loaded image

Fixed in changeset commit:"eaaa98fd4599aef44237c69f1a54808d66e64b51". Nyall Dawson

04:07 AM Bug report #13016 (Closed): Node tool: No visual feedback about snapping when editing end point o...

Using the node tool to edit the end point of a linestring there is no visible feedback about snapping. Paul Kanelli

03:46 AM Feature request #13015 (Closed): Add function help for IF expression in field calculator

In the field calculator the function help for IF expressions is missing.
IF (condition, result_when_true, result_whe... Paul Kanelli

2015-06-20

09:58 PM Bug report #12819 (Closed): Fix dialog consistency for effect properties

Fixed in changeset commit:"88629a6b19a110d5260d2b2641f631b17e347e7f". Nyall Dawson

02:02 PM Bug report #13014: Processing: OGR Convert Format fails to convert KML to Shapefile

Giovanni Manghi wrote:
> in your kml file the "name" tag contains a layer name in the form of "PONTO1.kml" while it s... Jorge Santos

01:50 PM Bug report #13014 (Closed): Processing: OGR Convert Format fails to convert KML to Shapefile

in your kml file the "name" tag contains a layer name in the form of "PONTO1.kml" while it should be "PONTO1". Maybe ... Giovanni Manghi

01:50 PM Bug report #13014 (Closed): Processing: OGR Convert Format fails to convert KML to Shapefile

in your kml file the "name" tag contains a layer name in the form of "PONTO1.kml" while it should be "PONTO1". Maybe ... Giovanni Manghi

01:43 PM Bug report #13014: Processing: OGR Convert Format fails to convert KML to Shapefile

Thanks, Jukka/Giovanni. Here goes. Jorge Santos

01:40 PM Bug report #13014 (Feedback): Processing: OGR Convert Format fails to convert KML to Shapefile

I have just tested on qgis master on Windows and is ok here. Please attach sample data. Giovanni Manghi

01:40 PM Bug report #13014 (Feedback): Processing: OGR Convert Format fails to convert KML to Shapefile

I have just tested on qgis master on Windows and is ok here. Please attach sample data. Giovanni Manghi

01:24 PM Bug report #13014: Processing: OGR Convert Format fails to convert KML to Shapefile

Please attach a minimal version of PONTO1.kml so that others can try to reproduce the issue. BTW. I would not call it... Jukka Rahkonen

12:10 PM Bug report #13014 (Closed): Processing: OGR Convert Format fails to convert KML to Shapefile

There's a crash when I'm trying to convert data form KML to ESRI Shapefile. No outtput file was produced. QGIS 2.8.2 ... Jorge Santos

09:28 AM Bug report #13013 (Closed): Custom function accepted in 2.8 is invalid in Master

I have created a custom function (**$compta**) within the new Function Editor in QGIS 2.8.... Harrissou Santanna

08:18 AM Bug report #12699: Plugin Manager : Installed plugins list is not sorted

Not all the time, I hadn't remarked this since my previous report. The day I got it, It was :
- the first time I laun... Harrissou Santanna

08:10 AM Bug report #12749: when using custom functions to style a layer, map canvas gives wrong colors (i...

Sorry, it's not that kind of functions. I wrote a custom function in the function editor. I was learning how this fea... Harrissou Santanna

07:12 AM Feature request #1898: Group Transparency/Opacity for Legend Groups

see also #3438 Andreas Neumann

07:12 AM Feature request #3438: Transparency for vector symbol layers

Actually I think it is already possible to do what you want - on a feature you can have opaque and transparent fills,... Andreas Neumann

07:12 AM Feature request #3438: Transparency for vector symbol layers

Actually I think it is already possible to do what you want - on a feature you can have opaque and transparent fills,... Andreas Neumann

06:04 AM Bug report #12423: Processing - Bar Plot (QGIS) doesn't plot string "category name field"

Maybe I miss something. What kind of feedback is needed ?
Thanks
Luca
Luca Lanteri

03:30 AM Bug report #13002 (Closed): Crash opening GRASS 7 mapset in QGIS browser on Windows

Fixed in changeset commit:"cb7f9b4cf7f65632125c047ce8c319472a0ff728". Radim Blazek

02:24 AM Bug report #13012 (Closed): labelling: drop shadow draws over character when the label placement ...

When drop shadow is enabled, and the label placement is set to curved, the drop shadow effect is drawn over character... Mathieu Pellerin - nIRV

2015-06-19

01:00 AM Bug report #13011: CRS not ok between switching between projects with different crs

Thanks Richard for testing. I can reproduce it by following the Training manual Processing exercises, loading one pro... Paolo Cavallini

12:56 AM Bug report #13011 (Closed): CRS not ok between switching between projects with different crs

checking after an email of Paolo on the list:
https://lists.osgeo.org/pipermail/qgis-developer/2015-June/038236.html... Richard Duivenvoorde

08:40 PM Feature request #9362: Export PDF layers from QGIS map composers

If you want to make a Georeferenced PDF for Avenza:
Set up your print composer, and export it as a georeferenced ima... James Wilson

08:40 PM Feature request #8771: Export print layouts in geospatial pdf format

If you want to make a Georeferenced PDF for Avenza:
Set up your print composer, and export it as a georeferenced ima... James Wilson

01:41 PM Bug report #12904 (Closed): Processing: list of variables not updated

#7810 Giovanni Manghi

01:41 PM Bug report #12904 (Closed): Processing: list of variables not updated

#7810 Giovanni Manghi

01:36 PM Bug report #5365 (Closed): Line detection fails

closed for lack of feedback and because it works. Giovanni Manghi

01:36 PM Bug report #5365 (Closed): Line detection fails

closed for lack of feedback and because it works. Giovanni Manghi

01:30 PM Feature request #4154 (Closed): Add GDAL calc

already implemented. Giovanni Manghi

01:30 PM Feature request #4154 (Closed): Add GDAL calc

already implemented. Giovanni Manghi

01:29 PM Feature request #12020 (Closed): "Import Vector into PostGIS database" should also allow to impor...

Giovanni Manghi

01:28 PM Feature request #11515 (Closed): Use ogr2ogr to create midpoints along lines

already implemented. Giovanni Manghi

01:28 PM Feature request #11515 (Closed): Use ogr2ogr to create midpoints along lines

already implemented. Giovanni Manghi

01:27 PM Feature request #11569 (Closed): Use ogr2ogr to Dissolve polygons

already implemented. Giovanni Manghi

01:27 PM Feature request #11569 (Closed): Use ogr2ogr to Dissolve polygons

already implemented. Giovanni Manghi

01:23 PM Bug report #12985 (Closed): Shapefile: The length of real type field is reduced by 1 every save

Fixed in changeset commit:"513cfad235cf587c48475d3d70b9fdd10a68dd06". Jürgen Fischer

11:04 AM Bug report #13001 (Closed): bigint geometries empty

Fixed in changeset commit:"1a6aee18f03614addbc0a104e38ec0c476890569". Jürgen Fischer

10:26 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

The provider (MSVC) calls Vect__open_old with struct Map_info variable allocated in the provider where sizeof(struct ... Radim Blazek

05:40 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

I have also compiled GRASS 6.4.4 by MinGW myself in the same environment like GRASS 7.0.0 and it works without crash.... Radim Blazek

03:05 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

Jürgen Fischer wrote:
> What calls @_lock_file@? I suppose somewhere on the path something passes a FILE pointer ret... Radim Blazek

02:49 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

Even Rouault commented in mailing list:
> I cannot comment on this particular case, but in the Windows world, I beli... Radim Blazek

02:44 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

See also https://lists.osgeo.org/pipermail/osgeo4w-dev/2015-June/002928.html Jürgen Fischer

02:30 AM Bug report #13002: Crash opening GRASS 7 mapset in QGIS browser on Windows

What calls @_lock_file@? I suppose somewhere on the path something passes a FILE pointer returned from one DLL to a ... Jürgen Fischer

02:27 AM Bug report #13002 (Closed): Crash opening GRASS 7 mapset in QGIS browser on Windows

QGIS crashes when trying to expand a GRASS mapset with vectors using GRASS 7 provider on Windows (OSGeo4W). It works ... Radim Blazek

10:19 AM Bug report #13010 (Closed): Processing: Export/Add geometry columns silently fails to overwrite e...

If the command is applied to a shp that contains already the xcoor, ycoor columns, the resulting layer is unchanged (... Paolo Cavallini

10:09 AM Bug report #13009 (Closed): Processing: select extent on canvas does not bring the window to the ...

When selecting an extent from the canvas, on win and osx the window of the current module disappears, leaving space f... Paolo Cavallini

09:49 AM Feature request #13008 (Open): Processing: batch processes loading files dialog always shows all ...

Better if it remembers the last choice (e.g. shp). Paolo Cavallini

09:32 AM Bug report #13007 (Closed): Labels for lines: at least one Position Placement should be there

Currently it is possible to unselect all three options under Vector > Properties > Labelling > Placement > Position, ... Paolo Cavallini

08:04 AM Bug report #6099 (Closed): Save as... for raster: missing extension on Gnome3

Fixed in changeset commit:"2125f6ac0d693be8a1798ea2044dc0cbdc41c817". Salvatore Larosa

07:12 AM Bug report #13005: QgsOracleFeatureIterator: returns all features if layer has no index

@sdo_filter@ requires a spatial index. @sdo_relate@ is only available with the spatial extension (ie. not in oracle ... Jürgen Fischer

07:08 AM Bug report #13005 (Closed): QgsOracleFeatureIterator: returns all features if layer has no index

Fixed in changeset commit:"dfc2cf0bbf7516886d6cbf7cb3211bbc023df19b". Jürgen Fischer

05:48 AM Bug report #13005 (Closed): QgsOracleFeatureIterator: returns all features if layer has no index

Hello,
i'm using QGis to show a view with a computed geometry column (and hence, i don't have a spatial index).
When... Frank Dekervel

06:28 AM Bug report #12996 (Closed): Regression - Wrong default values on feature attributes edit form

Fixed in changeset commit:"61f39d6ff3586d205b98d30ef80f84ed13e07c66". Jürgen Fischer

05:54 AM Bug report #13004: GRASS module r.drain won't start in Processing

if you choose a vector right now it does not work because the module expectes a GRASS vector input, and Processing is... Giovanni Manghi

05:52 AM Bug report #13004 (Closed): GRASS module r.drain won't start in Processing

This has been fixed here
https://github.com/qgis/QGIS/pull/2151
anyway you won't be able to use vector point layers... Giovanni Manghi

05:52 AM Bug report #13004 (Closed): GRASS module r.drain won't start in Processing

This has been fixed here
https://github.com/qgis/QGIS/pull/2151
anyway you won't be able to use vector point layers... Giovanni Manghi

04:39 AM Bug report #13004 (Closed): GRASS module r.drain won't start in Processing

I'm running QGIS dev version (dbfbc69) with GRASS 7.0.1 RC1 and Processing 2.9.3.
I'm trying to run the r.drain modul... Marie Silvestre

05:21 AM Bug report #10480 (Closed): Georeferencer truncates coordinates to 2 decimals

Fixed in changeset commit:"cecae9f107351404f202166237b3397735d4d9c2". Nyall Dawson

04:29 AM Bug report #12923: Project with SQL Server Layers opens much slower in 2.8 than 2.6

Most are not very complex. Two or three joined tables, one always being the feature table which has a unique int colu... Jason Moore

04:08 AM Bug report #13003 (Closed): processing: add a special case for r.drain

This module computes least cost paths for draining water.
The start point can be seeded as a list of coordinates AND... Giovanni Manghi

03:49 AM Bug report #12745 (Closed): processing python error

I also cannot replicate it anymore. Giovanni Manghi

03:49 AM Bug report #12745 (Closed): processing python error

I also cannot replicate it anymore. Giovanni Manghi

02:06 AM Bug report #11627: uncheck "case sensitive" in legend filter

Same thing for filter for field names in the Expressions. Paolo Cavallini

2015-06-18

01:07 AM Bug report #12745 (Feedback): processing python error

Martin Dobias

01:07 AM Bug report #12745: processing python error

I am unable to replicate - could you please provide a simple test project?
Martin Dobias

12:48 AM Bug report #13001 (Closed): bigint geometries empty

I have a PostGIS table with the pk being a bigint. If I put an *integer* into the bigint field all works ok (e.g. cop... Bernhard Ströbl

11:45 PM Bug report #10477 (Closed): Shortcut CTRL+R to invert selection is not working

Seems to be working fine in master and 2.8 Nathan Woodrow

11:45 PM Bug report #10477 (Closed): Shortcut CTRL+R to invert selection is not working

Seems to be working fine in master and 2.8 Nathan Woodrow

11:18 PM Bug report #12998: Warn users when using graduated/categorized/rule-based renderer and no rules h...

This can be done with no brus - no line, but yes, its' cumbersome. Paolo Cavallini

10:49 PM Bug report #12998: Warn users when using graduated/categorized/rule-based renderer and no rules h...

I think that is the correct thing to do in this case. We do really need a No Symbol render that would still allow fo... Nathan Woodrow

10:47 PM Bug report #12998: Warn users when using graduated/categorized/rule-based renderer and no rules h...

I'm a bit puzzled by this, but that's OK.
Changing the title and category of the ticket according to your suggestion. Paolo Cavallini

10:47 PM Bug report #12998: Warn users when using graduated/categorized/rule-based renderer and no rules h...

I'm a bit puzzled by this, but that's OK.
Changing the title and category of the ticket according to your suggestion. Paolo Cavallini

06:43 PM Bug report #12998: Warn users when using graduated/categorized/rule-based renderer and no rules h...

Only visible features are labeled, so the behavior is correct. Maybe just better to warn users when using graduated/c... Martin Dobias

09:03 AM Bug report #12998 (Open): Warn users when using graduated/categorized/rule-based renderer and no ...

* load a layer
* add labelling > correct
* go to either graduated or categorized style, and do not press the Classi... Paolo Cavallini

10:55 PM Bug report #12881 (Closed): Incorrect Loading of Layer Group in Layer Definition File (*.qlr)

Fixed in changeset commit:"a316290ada9e3141358dfac4cc03c6567ea057b9". Anonymous

10:21 PM Bug report #12335 (Closed): Processing can't find SAGA in Debian [regression]

Fixed in changeset commit:"eaf17e56c2ff6c74eb43319096a177fc301d5a39". Martin Dobias

10:08 PM Feature request #12967: Selection toolbar

Yeah I think this is a good idea too. Nathan Woodrow

09:22 PM Bug report #12930 (Closed): Crash when deleting a column from attribute table

Fixed in changeset commit:"6215f773e22cb55dac694ae6b213cd1f9ac39c53". Martin Dobias

02:06 AM Bug report #12930: Crash when deleting a column from attribute table

apparently it happens only when deleting the column from within the table of attributes, and it happens only on Linux... Giovanni Manghi

08:21 PM Bug report #12757 (Closed): Zoom out crashes QGIS

Fixed in changeset commit:"1bf9844652ad2b92ab2da2a37ebf941257416403". Sandro Santilli

08:21 PM Bug report #12911 (Closed): Path offset doesnt work in nightly

Fixed in changeset commit:"5e4841d94d7586a66e6be21b70d368ef65ca6087". Martin Dobias

06:43 PM Bug report #12254 (Closed): MSSQL 2008 SRID not recognized

Fixed in changeset commit:"9c73a22af52f3eec3959f2ed0e6953a6443d875b". Nathan Woodrow

05:39 PM Bug report #13000 (Closed): composer legend item clips layer symbols with layer-wide transparency...

The composer legend item currently clips polygon layer's symbols with large border width when the layer has layer-wid... Mathieu Pellerin - nIRV

03:57 PM Bug report #12923: Project with SQL Server Layers opens much slower in 2.8 than 2.6

What do your views look like? Nothing special? Have a unique int column for a key? Nathan Woodrow

04:09 AM Bug report #12923: Project with SQL Server Layers opens much slower in 2.8 than 2.6

I do have a spatial index on the feature table that stores all of the geometry data for the various views that I have... Jason Moore

03:36 PM Bug report #12774: Attribute table only show first 99 rows from SQL Server views

So just to check that is: non spatial tables which are views? Nathan Woodrow

04:27 AM Bug report #12774: Attribute table only show first 99 rows from SQL Server views

Still happens, only on non-spatial attribute tables (looks like only those that reference views in mssql) and only if... Jason Moore

03:30 PM Feature request #12999 (Open): Adding new attribute "Height of geoid" to QgsGPSInformation

I am trying to use QGIS for collecting points with height information in the field. The positional information comes ... Holger Eberhardt

11:34 AM Bug report #12992: osm.pbf files not showing objects count

OGR is not able to count feature on a OSM layer.
If you go to the layer properties -> metadata -> it's written -1 for... Etienne Trimaille

04:50 AM Bug report #12992 (Closed): osm.pbf files not showing objects count

If you open a osm.pbf file, and you want to show the count, qgis will not show them baditaflorin -

10:15 AM Bug report #12979 (Closed): D&D designer: if a tab is given an empty name, it remains empty

Special case of it, right. Sorry for the noise. Paolo Cavallini

10:15 AM Bug report #12979 (Closed): D&D designer: if a tab is given an empty name, it remains empty

Special case of it, right. Sorry for the noise. Paolo Cavallini

08:39 AM Bug report #12300 (Closed): Rendering issue with transparent WMS layers

Fixed in changeset commit:"dbfbc692838e768b13c970c7d777829883b4b841". Martin Dobias

08:10 AM Bug report #12995 (Closed): Regression - Wrong default values on feature attributes edit form

duplicated with #12996 Antoine EDENN

08:06 AM Bug report #12995 (Closed): Regression - Wrong default values on feature attributes edit form

QGIS 2.9 have a problem with edit form default values when you load table from postgres. QGIS recognize correctly dat... Antoine EDENN

08:07 AM Bug report #12996 (Closed): Regression - Wrong default values on feature attributes edit form

QGIS 2.9 have a problem with edit form default values when you load table from postgres. QGIS recognize correctly dat... Antoine EDENN

07:54 AM Bug report #12994 (Closed): 2.2 Gb osm.pbf file is not open correctly in QGIS

i tried to open a 2.2 GB in QGIS, and not all the ways are loading, making me think that the file is corrupt.
After... baditaflorin -

07:33 AM Feature request #12492: defaults for the edit widgets

+ 1 , would be very nice ! Regis Haubourg

06:19 AM Bug report #12589 (Closed): Choose which fields are joined behaves wrongly when the target field ...

Fixed in changeset commit:"78708159b28bcbfa94e53f8b93f91790fa43ec02". Martin Dobias

06:09 AM Bug report #12699: Plugin Manager : Installed plugins list is not sorted

So does it happen incidentally, or all the time on this computer? If incidentally, are you able to recall that situat... Borys Jurgiel

05:44 AM Bug report #12699 (Reopened): Plugin Manager : Installed plugins list is not sorted

I don't know if I have to reopen the issue (otherwise, what is reopening option for?) or create new issue but I repro... Harrissou Santanna

05:44 AM Bug report #12699 (Reopened): Plugin Manager : Installed plugins list is not sorted

I don't know if I have to reopen the issue (otherwise, what is reopening option for?) or create new issue but I repro... Harrissou Santanna

05:44 AM Bug report #12699 (Reopened): Plugin Manager : Installed plugins list is not sorted

I don't know if I have to reopen the issue (otherwise, what is reopening option for?) or create new issue but I repro... Harrissou Santanna

05:53 AM Bug report #3407 (Closed): Georeferencer asks for output file name even if only tfw is selected

Fix was implemented in 47a1280f25ac394cce236c7ee327a606e10ccd10 Nyall Dawson

05:53 AM Bug report #3407 (Closed): Georeferencer asks for output file name even if only tfw is selected

Fix was implemented in 47a1280f25ac394cce236c7ee327a606e10ccd10 Nyall Dawson

05:45 AM Bug report #12795: Georeferencer generates incorrect GDAL script when input file is JPG

So... to clarify, there's two issues. One is that the generated GDAL script is wrong, the second is that QGIS can't t... Nyall Dawson

05:33 AM Bug report #12795: Georeferencer generates incorrect GDAL script when input file is JPG

Nyall Dawson wrote:
> I can't reproduce - is this only when using the generated GDAL scripts? Does the georeferencing... Casper Børgesen

05:34 AM Bug report #12993 (Closed): slow WFS response using big project files

Serving WFS gets slow when the project file contains a large number of layers (tested with Postgis layers). The issue... Henrik Uggla

05:17 AM Bug report #12319 (Closed): QGIS 2.8.1 crash when loading project

OK, I cleared the QGIS settings from the Windows registry and now the problem has gone away. Sorry about the noise.
... Bart Noordervliet

04:24 AM Bug report #12340 (Reopened): using --configpath on new empty dir raises Python error + subseques...

Reopening this one, because this still occurs with me.
If I surround the import expressions part with a try/catch, a... Richard Duivenvoorde

04:18 AM Feature request #12991 (Closed): "build virtual vector": add option to allow add the layers as "u...

The vrt created by the tool does not have the
<OGRVRTUnionLayer>
tag that allows load the layers inside the vrt as... Giovanni Manghi

04:14 AM Feature request #12990: "build virtual vector": add support for postgis/spatialite layers

Luigi Pirelli wrote:
> may you add the error and (if generated) the erroneous generated format?
no output generated,... Giovanni Manghi

04:07 AM Feature request #12990: "build virtual vector": add support for postgis/spatialite layers

may you add the error and (if generated) the erroneous generated format? Luigi Pirelli

04:00 AM Feature request #12990 (Open): "build virtual vector": add support for postgis/spatialite layers

Trying to create a virtual vector with postgis/spatialite layers (or anything that is not a shapefile) the tool will ... Giovanni Manghi

04:04 AM Feature request #12988 (Closed): Allow symbol offset of more than 100 map units

Fixed in changeset commit:"03aa1e7e27a5b1a8458f0e5ba564932a763bc1f3". Nyall Dawson

03:52 AM Feature request #10845: Improve Snapping Options

I will have a look at this for the next release after 2.10 Nathan Woodrow

03:52 AM Feature request #10845: Improve Snapping Options

I will have a look at this for the next release after 2.10 Nathan Woodrow

03:20 AM Feature request #10845: Improve Snapping Options

Being able to "select/Deselect" all with the advnaced snapping otions would be a massive help, I have hundreds of lay... Jon Pine

03:48 AM Bug report #11625: Georeferencer wrong tool highlighted

I've just checked under OSX and still can't reproduce this. Can you attach a screencast showing how you trigger it? Nyall Dawson

03:02 AM Bug report #12631 (Closed): QgsSnapper.snapToCurrentLayer() not working anymore in QGIS 2.8

Fixed in changeset commit:"e6466477136a440125108cbe2406cbf971ceff19". Martin Dobias

02:48 AM Bug report #4311 (Closed): Georeferencer: "generate pdf map" result in a blank PDF

Fixed in changeset commit:"ca7848808e0cc507365d15c307e5f6f0f525dfda". Nyall Dawson

02:31 AM Bug report #12578: Large pause before snapping to large layer

I tested the release candidate yesterday and it is still the same. Do we think this will be resolved in 2.10 and the ... Matt Travis

02:14 AM Bug report #12987 (Feedback): Values not updating properly when editing attribute table

I cannot confirm here (ubuntu too) on both 2.8.2 and master. Giovanni Manghi

02:14 AM Bug report #12987 (Feedback): Values not updating properly when editing attribute table

I cannot confirm here (ubuntu too) on both 2.8.2 and master. Giovanni Manghi

02:14 AM Bug report #12987 (Feedback): Values not updating properly when editing attribute table

I cannot confirm here (ubuntu too) on both 2.8.2 and master. Giovanni Manghi

2015-06-17

01:34 AM Bug report #12987: Values not updating properly when editing attribute table

Frank Sokolic wrote:
> I have also tested the Field Calculator and tried to add polygon centroids using the $x and $y... Giovanni Manghi

01:32 AM Bug report #12987: Values not updating properly when editing attribute table

I have also tested the Field Calculator and tried to add polygon centroids using the $x and $y functions. These just ... Frank Sokolic

12:32 AM Bug report #12987 (Closed): Values not updating properly when editing attribute table

This happens when editing +shapefile+ attribute tables:
# Open an attribute table
# Enable editing
# Edit values in t... Frank Sokolic

01:32 AM Bug report #12009 (Closed): Creating new QgsComposerHtml from Python causes segmentation fault

Fixed in changeset commit:"0c5352fad611efe99ad8322fc1d5a465df561712". Martin Dobias

01:24 AM Bug report #12979 (Feedback): D&D designer: if a tab is given an empty name, it remains empty

Is that related to (or a duplicate of) #10724? Matthias Kuhn

01:17 AM Bug report #12930: Crash when deleting a column from attribute table

Here's the shapefile that causes QGIS to crash every time I try delete a column. Frank Sokolic

01:03 AM Bug report #12930: Crash when deleting a column from attribute table

Frank Sokolic wrote:
> Unfortunately I'm still getting the crash.
>
> Could it be a memory problem? When deleting a ... Giovanni Manghi

01:01 AM Bug report #12930 (Reopened): Crash when deleting a column from attribute table

Unfortunately I'm still getting the crash.
Could it be a memory problem? When deleting a column from a table with > ... Frank Sokolic

01:09 AM Bug report #12989 (Closed): "The relation is not valid.." message is shown always

In the demo project the referencing side of the relation in the relation manager is not the same as the one configure... Matthias Kuhn

01:09 AM Bug report #12989 (Closed): "The relation is not valid.." message is shown always

In the demo project the referencing side of the relation in the relation manager is not the same as the one configure... Matthias Kuhn

01:08 AM Bug report #12989: "The relation is not valid.." message is shown always

I see it also on master/linux. Giovanni Manghi

12:53 AM Bug report #12989 (Closed): "The relation is not valid.." message is shown always

Hi,
I notice that when set a relation and go to identify the layer, the window show the message
"the relation is not ... aperi2007 -

12:55 AM Bug report #12363 (Feedback): crash in QgsPalettedRasterRenderer when saving pixmap layer

Please attach source layer and parameters used when doing save raster operation Martin Dobias

12:54 AM Feature request #12988 (Feedback): Allow symbol offset of more than 100 map units

does this means that any value above 100 map units is always threated as 100? Giovanni Manghi

12:54 AM Feature request #12988 (Feedback): Allow symbol offset of more than 100 map units

does this means that any value above 100 map units is always threated as 100? Giovanni Manghi

12:54 AM Feature request #12988 (Feedback): Allow symbol offset of more than 100 map units

does this means that any value above 100 map units is always threated as 100? Giovanni Manghi

12:44 AM Feature request #12988 (Closed): Allow symbol offset of more than 100 map units

At the moment it's not possible to have a Y offset more than 100 map units. I wish that maximum would be larger. Oskar Karlin

12:47 AM Bug report #9165 (Feedback): curved labels: words printed one above the other

Giovanni Manghi

12:10 AM Bug report #9165: curved labels: words printed one above the other

I just tested this and I cannot reproduce this error. Denis - can you confirm that this error still exists in QGIS ma... Andreas Neumann

12:45 AM Bug report #12986 (Feedback): Crash Dump Windows 8.1

Please try also try qgis master, if is the multithreading thing it should be fixed there. Giovanni Manghi

12:45 AM Bug report #12986 (Feedback): Crash Dump Windows 8.1

Please try also try qgis master, if is the multithreading thing it should be fixed there. Giovanni Manghi

09:08 PM Bug report #12986: Crash Dump Windows 8.1

Do you have "Render layers in parallel..." ticked in Options -> Rendering? Nathan Woodrow

09:05 PM Bug report #12986 (Closed): Crash Dump Windows 8.1

Hello, I am repeatable getting the crash dump screen when zooming in or out on a map or when moving the map around o ... Luke Taylor

12:32 AM Bug report #12795 (Feedback): Georeferencer generates incorrect GDAL script when input file is JPG

I can't reproduce - is this only when using the generated GDAL scripts? Does the georeferencing work OK from within Q... Nyall Dawson

12:11 AM Bug report #12923 (Feedback): Project with SQL Server Layers opens much slower in 2.8 than 2.6

Nathan Woodrow

12:11 AM Bug report #12923: Project with SQL Server Layers opens much slower in 2.8 than 2.6

You have a spatial index on the layers? Nathan Woodrow

12:10 AM Bug report #10615 (Closed): MSSQL table attributes are not correct in qgis

As of 2.8 having a unique key column is now enforced to stop this from happening. I will be adding better error messa... Nathan Woodrow

12:10 AM Bug report #10615 (Closed): MSSQL table attributes are not correct in qgis

As of 2.8 having a unique key column is now enforced to stop this from happening. I will be adding better error messa... Nathan Woodrow

12:08 AM Bug report #8327 (Feedback): MSSQL provider overwrites username in table creation

Nathan Woodrow

12:08 AM Bug report #8327: MSSQL provider overwrites username in table creation

Is that the expected outcome though. I guess it should go into the schema it was dropped onto if you have write perm... Nathan Woodrow

12:05 AM Bug report #11971 (Closed): MSSQL data with Z and M where Z is NULL wont display

Fixed in changeset commit:"012f322d96969e8d8db3514bc85bad51246c7a0d". Nathan Woodrow

11:51 PM Bug report #12985: Shapefile: The length of real type field is reduced by 1 every save

sounds related to commit:2fcbc8b Jürgen Fischer

07:11 PM Bug report #12985 (Closed): Shapefile: The length of real type field is reduced by 1 every save

I just ran my "QGIS tester plugin":https://github.com/minorua/QGISTesterA, and saw two test failed. Both tests are ab... Minoru Akagi

11:06 PM Bug report #12635: QgsRasterLayer.setDrawingStyle string version is in the bindings instead of th...

The setDrawingStyle() method is completely obsolete. I have also updated the cookbook: https://github.com/qgis/QGIS-D... Martin Dobias

11:05 PM Bug report #12635 (Closed): QgsRasterLayer.setDrawingStyle string version is in the bindings inst...

Fixed in changeset commit:"40acaa051a7b3d03bcce4a183d9039c27efed81b". Martin Dobias

10:20 PM Bug report #12774: Attribute table only show first 99 rows from SQL Server views

Do you still see this happening. I can't reproduce it here Nathan Woodrow

10:17 PM Bug report #12556 (Closed): SQL Server Spatials views can not be laded any more

I am closing this as I will be adding non int based keys in a future version which will solve this issue. Nathan Woodrow

10:17 PM Bug report #12556 (Closed): SQL Server Spatials views can not be laded any more

I am closing this as I will be adding non int based keys in a future version which will solve this issue. Nathan Woodrow

09:18 PM Bug report #12901: QGIS 2.8.2 in attribute table field calc fails with $x and $y

Note: $x and $y only work with point and multi-point geometries. Polygons are not supported and will return NULL Martin Dobias

09:12 PM Bug report #12929: XML file freezes QGIS 2.8.2/master

Btw. not an issue with GDAL 1.10.1 Martin Dobias

08:56 PM Bug report #12940 (Closed): Advanced digitizing doesn't work when coordinates are given

Fixed in changeset commit:"646b445bf799daf4bc2a09b88bc6b6f2dc51d545". Martin Dobias

08:18 PM Bug report #12948 (Closed): different SVG extent in composer than in map canvas

Fixed in changeset commit:"b81933ee56ff94a764bd3b9027dbfaa190ae2f35". Martin Dobias

08:03 PM Bug report #12749 (Feedback): when using custom functions to style a layer, map canvas gives wron...

Works fine for me with tests like "$id > 10".
Probably something specific to your custom function... could you pleas... Martin Dobias

07:22 PM Bug report #12949: Problem When Doing Intersect

Giovanni Manghi wrote:
> > I've tried to do this process in my windows computer.
> > I just could try the v.overlay p... Adi Kurniawan

07:48 AM Bug report #12949: Problem When Doing Intersect

> I've tried to do this process in my windows computer.
> I just could try the v.overlay process that available in G... Giovanni Manghi

03:26 AM Bug report #12949: Problem When Doing Intersect

Giovanni Manghi wrote:
> > Hi Giovanni,
> >
> > The setting that you mean is this?
> > !https://cloud.githubusercon... Adi Kurniawan

05:09 PM Bug report #12983 (Feedback): saving map as pdf in map composer - raster layer omitted

Can't reproduce - can you attach a sample project/data files which demonstrate this issue? Nyall Dawson

03:14 PM Bug report #12983 (Closed): saving map as pdf in map composer - raster layer omitted

When exporting a map in map composer as pdf, the raster layer is not included. pvanbosgeo -

05:08 PM Feature request #12984 (Closed): raster calculator conditional statement

Duplicate of #4476 Nyall Dawson

05:08 PM Feature request #12984 (Closed): raster calculator conditional statement

Duplicate of #4476 Nyall Dawson

03:52 PM Feature request #12984 (Closed): raster calculator conditional statement

It would be possible to implement a conditional statement like in SAGA grid calculator
to allow an easier setting of... ilaria marengo

03:53 PM Bug report #12829: 'Sample color' button error?

I have had this happen again recently. It could just be my Windows computer. I'll try and find out more next time I h... James Harvey

03:20 PM Bug report #12982 (Closed): Add shapes is missing from the menu

Fixed in changeset commit:"1d6086c02e9ea785524b9dcdda7e2bbcdf2efd25". Nyall Dawson

08:48 AM Bug report #12982 (Closed): Add shapes is missing from the menu

Add shape should be under s sub-menu under Layout with:
Add Rectangle
Add Triangle
Add Ellipse
Currently, the toolba... Saber Razmjooei

02:55 PM Bug report #11625: Georeferencer wrong tool highlighted

Still happens with nightly dev build. William Kyngesburye

02:49 PM Bug report #12977: Change of CRS in QGIS causes crash/freeze in Composer

Nicholas Duggan wrote:
> Hi, workflow is as follows:
> 1. Open QGIS, apply coordinate system (web mercator) to map.
>... Giovanni Manghi

01:03 PM Bug report #12977: Change of CRS in QGIS causes crash/freeze in Composer

Hi, workflow is as follows:
1. Open QGIS, apply coordinate system (web mercator) to map.
2. Open Print Composer
3. Cr... Nicholas Duggan

06:58 AM Bug report #12977 (Feedback): Change of CRS in QGIS causes crash/freeze in Composer

Maybe I didn't understand the necessary steps to cause the issue, but I'm not able to replicate it on qgis master. Co... Giovanni Manghi

09:40 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...

Hi,
how can i do this and bring the issue it to the developpers list?
Thanks
Gerhard Gerhard Spieles

07:01 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...

Gerhard Spieles wrote:
> Hello Giovanni,
>
> we corrected our wms serverconfiguration (see #24)and can now use it wi... Giovanni Manghi

08:14 AM Bug report #12690 (Closed): Snapping do not work for new features after save edits on oracle spat...

Fixed in changeset commit:"d3df4edaedc9542830dba1a99ce1b20d2bdc5773". Jürgen Fischer

02:25 AM Bug report #12690 (Feedback): Snapping do not work for new features after save edits on oracle sp...

Jan Lippmann wrote:
> have you tested the sample tables " CREATE_GIS_TABLES.sql"?
Sure. Although stripped down a bi... Jürgen Fischer

07:23 AM Bug report #12770: shapefile gets corrupted after editing

Doesn't happen on other computer with Vista, I'll try on a clean installation though, thanks for suggestion! Weronika Rapa

07:12 AM Bug report #12770: shapefile gets corrupted after editing

Weronika Rapa wrote:
> Happened on many occasions with different shps and projects. Had no issues before I started wo... Giovanni Manghi

07:02 AM Bug report #12770: shapefile gets corrupted after editing

Happened on many occasions with different shps and projects. Had no issues before I started working on new computer w... Weronika Rapa

06:21 AM Bug report #12770: shapefile gets corrupted after editing

Weronika Rapa wrote:
> No, I'm not doing any concurrent edits. It happens while saving the shapefile or sometimes whe... Giovanni Manghi

06:06 AM Bug report #12770: shapefile gets corrupted after editing

No, I'm not doing any concurrent edits. It happens while saving the shapefile or sometimes when saving the project it... Weronika Rapa

06:59 AM Bug report #12928: Using form view to edit data, changes the attribute that uses Date/Time widget...

Nhung Seidensticker wrote:
> Hi Matthias,
> Sorry, I was wrong I thought our spatial layer was an Esri Shape file. I... Giovanni Manghi

06:53 AM Bug report #12974 (Feedback): "Select by location" does not give any warning whe using layers wit...

This is a long standing request, see #4564
Until implemented I think that the actual bug here is that no warning is ... Giovanni Manghi

06:53 AM Bug report #12974 (Feedback): "Select by location" does not give any warning whe using layers wit...

This is a long standing request, see #4564
Until implemented I think that the actual bug here is that no warning is ... Giovanni Manghi

06:50 AM Feature request #12975 (Feedback): sync connections between browser and "Add Layer(s) from WM(T)S...

Just tested on both Windows and Linux and any connection created within the browser immediately shows also in the "ad... Giovanni Manghi

06:50 AM Feature request #12975 (Feedback): sync connections between browser and "Add Layer(s) from WM(T)S...

Just tested on both Windows and Linux and any connection created within the browser immediately shows also in the "ad... Giovanni Manghi

06:50 AM Feature request #12975 (Feedback): sync connections between browser and "Add Layer(s) from WM(T)S...

Just tested on both Windows and Linux and any connection created within the browser immediately shows also in the "ad... Giovanni Manghi

06:46 AM Bug report #12976 (Closed): [Browser (2)] should have WMTS

duplicate of #12507
OWS means any W*S connection. Giovanni Manghi

06:46 AM Bug report #12976 (Closed): [Browser (2)] should have WMTS

duplicate of #12507
OWS means any W*S connection. Giovanni Manghi

06:45 AM Bug report #12507 (Reopened): Browser connections issues in master

WMTS connections still do not show any layer in the WMS group of browser, but it is ok in OWS. Was working on 2.6.1 Giovanni Manghi

06:45 AM Bug report #12507 (Reopened): Browser connections issues in master

WMTS connections still do not show any layer in the WMS group of browser, but it is ok in OWS. Was working on 2.6.1 Giovanni Manghi

06:45 AM Bug report #12507 (Reopened): Browser connections issues in master

WMTS connections still do not show any layer in the WMS group of browser, but it is ok in OWS. Was working on 2.6.1 Giovanni Manghi

05:44 AM Feature request #12981 (Open): Manage Layer Visibility item under Layer menu

It will make sense to have the following items:
Show all layers
Hide all layers
Show selected layer
Hide selected lay... Saber Razmjooei

02:14 AM Feature request #12980 (Closed): Handling GNSS receiver data

Hello,
i tried to use an external GPS/GNSS Receiver (u-blox) that allows to use GLONASS satellite data to get more p... Oliver Toth

2015-06-16

07:16 PM Feature request #9984 (Closed): Additional Type case option: Title case

Duplicate of #7611 Alister Hood

07:16 PM Feature request #9984 (Closed): Additional Type case option: Title case

Duplicate of #7611 Alister Hood

03:31 PM Bug report #4289 (Closed): Georeferencer missing from Mac V1.8?

1.8 is ancient news... Please reopen if reproducable in a recent version. Nyall Dawson

03:30 PM Bug report #11625 (Feedback): Georeferencer wrong tool highlighted

I can't reproduce this - is it still an issue with master? Nyall Dawson

10:58 AM Bug report #12979 (Closed): D&D designer: if a tab is given an empty name, it remains empty

If when creating a tab in Drag and Drop designer the user forgets to give it a name, there seem to be no way to addin... Paolo Cavallini

10:55 AM Bug report #12978 (Closed): Adding a field after a virtual field does not show correctly

If I add a new field after a virtual field, the field characteristics for the new field are shown from the virtual fi... Paolo Cavallini

10:46 AM Bug report #11475 (Closed): bad bracket simplification in expression

Fixed in changeset commit:"8342739b375bb30fe2f751337078f0baefb51368". Anonymous

07:41 AM Bug report #12349 (Closed): Inverse Shapeburst fill of polygons shows vertices and not edges

Doesn't appear to be a problem in 2.8.2 or Master :) Nicholas Duggan

07:41 AM Bug report #12349 (Closed): Inverse Shapeburst fill of polygons shows vertices and not edges

Doesn't appear to be a problem in 2.8.2 or Master :) Nicholas Duggan

07:40 AM Bug report #12364 (Closed): Output from print composer differs from map frame (shapeburst?)

Nicholas Duggan

07:38 AM Bug report #12977 (Closed): Change of CRS in QGIS causes crash/freeze in Composer

If I open an [old] QGIS session which is linked to composer and change the coordinate system of the data frame if cau... Nicholas Duggan

06:00 AM Bug report #12976 (Closed): [Browser (2)] should have WMTS

The list of connections seems incomplete without the WMTS options.
Also, what is the OWS connections, and why are th... Guido Stein

05:59 AM Feature request #12975 (Closed): sync connections between browser and "Add Layer(s) from WM(T)S S...

Is it possible to have the browser in sync with the uConnections displayed int he "Add Layer(s) from WM(T)S Server Di... Guido Stein

04:54 AM Bug report #12952 (Closed): addition of graduated steps through histogram feature doesn't work wi...

Fixed in changeset commit:"2458eaf8ccb942919574f53516c27e7ff17b0555". Nyall Dawson

02:54 AM Bug report #12974 (Closed): "Select by location" does not give any warning whe using layers with ...

Hi !
The "Select by location" tool does not work with layers with different CRS.
Currently, there's no warning messa... Olivier Dalang

2015-06-15

09:38 PM Bug report #12659: Certain fonts don't work in Print Composer

Note: you will have to re-select the font(s) for composer items and save the project once that's done for the proper ... Mathieu Pellerin - nIRV

02:43 AM Bug report #12659 (Closed): Certain fonts don't work in Print Composer

Likely fixed in commit:7a3a857. Please reopen if you still experience this issue after 2.10. Nyall Dawson

09:36 PM Bug report #12973 (Closed): layer panel's symbol are drawn with excessive width if they are locat...

The layer panel will draw symbols for polygons located in 2nd level of a rule-based tree with a width twice a large a... Mathieu Pellerin - nIRV

08:43 PM Feature request #12972 (Closed): run action on identify

instead of clicking on the action menu in the "identify results" pane, to run an action. Some actions can be run auto... rhys stewart

06:32 PM Bug report #12928: Using form view to edit data, changes the attribute that uses Date/Time widget...

Hi Matthias,
Sorry, I was wrong I thought our spatial layer was an Esri Shape file. It's actually a MapInfo tab file... Nhung Seidensticker

06:32 PM Bug report #12928: Using form view to edit data, changes the attribute that uses Date/Time widget...

Hi Matthias,
Sorry, I was wrong I thought our spatial layer was an Esri Shape file. It's actually a MapInfo tab file... Nhung Seidensticker

03:57 PM Bug report #12943 (Closed): Vertex markers size incremented by 2 instead of 1

Fixed in changeset commit:"78fa6970fa6591cc0e823afd1002ba17c6f7cd19". Harrissou Santanna

12:33 PM Bug report #12970 (Closed): Can't duplicate (copy/paste) print composer's attribute table items

Duplicate of #10456 Nyall Dawson

12:33 PM Bug report #12970 (Closed): Can't duplicate (copy/paste) print composer's attribute table items

Duplicate of #10456 Nyall Dawson

06:36 AM Bug report #12970 (Closed): Can't duplicate (copy/paste) print composer's attribute table items

Both in 2.8.2 and master, it's not possible to duplicate attribute table items in the map composer by using copy/past... Alexandre Neto

11:00 AM Bug report #11141 (Closed): Parallel multi-core rendering crashes QGIS

reopen if necessary. Giovanni Manghi

11:00 AM Bug report #11141 (Closed): Parallel multi-core rendering crashes QGIS

reopen if necessary. Giovanni Manghi

06:56 AM Bug report #11141: Parallel multi-core rendering crashes QGIS

Confimred, problem seems gone in f4c3f3d (OSGEO-Install) Bernhard Ströbl

09:02 AM Bug report #12234: QGIS freezes when adding a legend in composer and project has a WMS layer with...

Hello Giovanni,
we corrected our wms serverconfiguration (see #24)and can now use it with QGIS.
Unfortunately, many... Gerhard Spieles

07:28 AM Bug report #12971 (Closed): Set the CRS of Dataset

IF I load a Dataset without a proper CRS-set to it Qgis asks me to choose one.
When I CANCEL the "Select CRS"-Dialog ... Peter Drexel

06:29 AM Feature request #12969 (Closed): Autohide empty groups and sub-groups in "Filtered" Map Composer'...

While using "Filter legend by map content", at the print composer, it would be nice to also hide the resulting empty ... Alexandre Neto

05:24 AM Bug report #12949: Problem When Doing Intersect

> Hi Giovanni,
>
> The setting that you mean is this?
> !https://cloud.githubusercontent.com/assets/8871958/815178... Giovanni Manghi

04:09 AM Bug report #12968 (Closed): Scaled symbols legend centered

Not sure if it's a feature request or a bug. But the new Scaled symbols legend, is displayed differently in map canva... Alexandre Neto

03:57 AM Bug report #12690 (Reopened): Snapping do not work for new features after save edits on oracle sp...

Hello Jürgen, there is still a problem in my environment. what else can I check? have you tested the sample tables " ... Jan Lippmann

03:57 AM Bug report #12690 (Reopened): Snapping do not work for new features after save edits on oracle sp...

Hello Jürgen, there is still a problem in my environment. what else can I check? have you tested the sample tables " ... Jan Lippmann

02:41 AM Bug report #12644 (Closed): A number of fonts in the composer have metrics messed up upon project...

Fixed in changeset commit:"7a3a857d79c073773d94d7ce5e304c22a73cabda". Nyall Dawson

2015-06-14

01:55 AM Feature request #12967 (Open): Selection toolbar

I think we should have a seprate toolbar for "Selection". Currently, there is "Attributes" toolbar which contains spa... Saber Razmjooei

12:10 AM Bug report #12965 (Closed): Legend item name not updated in Composer when renaming layer

When renaming the layer name in the layers docker it doesn't change legend item name in the Composer. Interestingly i... Miroslav Umlauf

10:37 PM Feature request #12964 (Closed): Document the spatial filtering of attribute table

Better document this nice and somewhat hidden feature:
The workaround for the slow loading of a big attribute table ... Paolo Cavallini

09:19 PM Bug report #10522 (Feedback): Data-defined symbology not working with field names that are valid ...

Should be resolved in master now - can you confirm? Nyall Dawson

07:09 PM Bug report #12949: Problem When Doing Intersect

Giovanni Manghi wrote:
> Tim Sutton wrote:
> > Hi Giovanni
> >
> > I tried to show him to use v.overlay, but unfortu... Adi Kurniawan

03:38 PM Bug report #11755 (Closed): Real precision (Shapefile)

Fixed in changeset commit:"2fcbc8bb725f45ba1d0196a95c7f21c90894a0d6". Jürgen Fischer

02:29 PM Bug report #12954 (Closed): 2.9 QGIS Browser Icon on Ubuntu 14.04 hasn't changed

Fixed in changeset commit:"f261270292230a945078ca5e47284990407c0d97". Jürgen Fischer

01:31 PM Feature request #12958: Add Radio buttons or "option row" to the list of available widgets for forms

Yes, that is exactly what I had in mind. In cases where one has not too many options for values for an attribute (let... Stefan Blumentrath

01:10 PM Feature request #12958 (Feedback): Add Radio buttons or "option row" to the list of available wid...

Should that be a configuration option for ValueMap (and ValueRelation)? Matthias Kuhn

11:56 AM Bug report #12963 (Closed): QgsMapToolIdentifyFeature default cursor hotspot is incorrect

When implementing a custom QgsMapToolIdentifyFeature tool, i came across this. You set the active tool (which subclas... Uros Bernik

11:56 AM Bug report #12325 (Closed): Integer fields converted to text when exported from Spatialite

Fixed in changeset commit:"6e55fbe1495e5a3d2a1ba3181a71543e026edc1a". Jürgen Fischer

11:02 AM Bug report #12950 (Closed): Fields ignored in overlapping polygons

Giovanni Manghi

10:29 AM Bug report #12950: Fields ignored in overlapping polygons

Giovanni, excuse me I have seen that it works really well on another computer with the same version of QGIS in Arch L... Samuel Fernando Mesa Giraldo

09:45 AM Bug report #12686 (Feedback): layer.featureAdded triggered on Feature Attribute Dialog confirm

not reproducable on master Jürgen Fischer

09:45 AM Bug report #12686 (Feedback): layer.featureAdded triggered on Feature Attribute Dialog confirm

not reproducable on master Jürgen Fischer

09:16 AM Feature request #12879: isSelected operator to define expression baswesd style on selection

And a note for people stumbling upon this report and looking for a workaround: Get the https://github.com/NathanW2/qg... Matthias Kuhn

09:14 AM Feature request #12879: isSelected operator to define expression baswesd style on selection

Nice feature request!
I wonder however if there is any performance benefit for adding a selected property to the fea... Matthias Kuhn

08:45 AM Bug report #8425 (Closed): Simplify feture map tool doesn't work with polygons with holes

not an issue anymore. Giovanni Manghi

08:45 AM Bug report #8425 (Closed): Simplify feture map tool doesn't work with polygons with holes

not an issue anymore. Giovanni Manghi

08:29 AM Bug report #3422 (Closed): Unreadable icons in TOC

not an issue anymore. Giovanni Manghi

08:29 AM Bug report #3422 (Closed): Unreadable icons in TOC

not an issue anymore. Giovanni Manghi

06:49 AM Feature request #4778: Import of multiple shapefiles in PostGIS

Giovanni Manghi wrote:
> There are alternatives in the Processing toolbox where any tool can be run in batch mode. Th... Jürgen Fischer

06:34 AM Feature request #4778: Import of multiple shapefiles in PostGIS

Paul Kanelli wrote:
> When creating a table using the "DB Manager" the "Create table" window stays open after finishi... Giovanni Manghi

05:38 AM Feature request #4778: Import of multiple shapefiles in PostGIS

When creating a table using the "DB Manager" the "Create table" window stays open after finishing. That's quite usefu... Paul Kanelli

05:03 AM Bug report #12962 (Closed): Newly added geometries are hidden by existing geometries before savin...

In the layer edit mode newly added polygons are hidden by existing polygons. After saving the layer edits the added p... Paul Kanelli

04:49 AM Bug report #12799 (Closed): QgsFeatureRequest iterator using filterRect (spatial index) lose some...

upsteam issue was closed. other issues should be fixed by the referenced commits. Jürgen Fischer

04:49 AM Bug report #12799 (Closed): QgsFeatureRequest iterator using filterRect (spatial index) lose some...

upsteam issue was closed. other issues should be fixed by the referenced commits. Jürgen Fischer

04:18 AM Bug report #12959 (Closed): No visual feedback when moving geometries with the node tool

Fixed in changeset commit:"c54013c4cd2931142a81c0e6ec72eef4c7ae3c93". Jürgen Fischer

04:18 AM Bug report #12886 (Closed): delete part has no effect on single geometries

Fixed in changeset commit:"df31fc0f43c8789f6d0d60c9db3982c569814d48". Jürgen Fischer

03:34 AM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails

"Table/Move to schema" is working fine, even the sequences of the serial columns are moved. Paul Kanelli

02:30 AM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails

"postgres" is the owner of the database, both schemata and the table. In my QGIS project I'm connected via "postgres"... Paul Kanelli

02:17 AM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails

Paul Kanelli wrote:
> I've created a table "test_geometry" using the DB manager. When trying to copy it from "testsch... Giovanni Manghi

02:14 AM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails

I've created a table "test_geometry" using the DB manager. When trying to copy it from "testschema_1" to "testschema_... Paul Kanelli

02:14 AM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails

I've created a table "test_geometry" using the DB manager. When trying to copy it from "testschema_1" to "testschema_... Paul Kanelli

03:26 AM Feature request #12961 (Closed): "Import vector layer" (DB Manager): Misleading option "Drop exis...

In my view the option "Drop existing table" in the "Import vector layer" window (DB Manager) is somewhat misleading. ... Paul Kanelli

03:10 AM Feature request #12960 (Open): Add "Snapping mode" (Current layer, All layers) to Settings/Option...

Please add "Snapping mode" (Current layer, All layers) to Settings/Options/Digitizing/Snapping. Paul Kanelli

02:21 AM Bug report #5599 (Closed): Unable to select/identify a polyline

Giovanni Manghi

02:10 AM Bug report #4049 (Closed): Trouble Symbolizing Fields in a Joined Table QGIS 1.7

Giovanni Manghi

02:02 AM Bug report #12957 (Closed): Feature count doesn't show correct values for PostGIS layers after de...

Fixed in changeset commit:"37ed83905f3b81ecd778c5abb1703805ce34666b". Jürgen Fischer

2015-06-13

01:52 AM Bug report #12830: QGIS crashes when erroneous credentials for WMS in qgis.conf

Ray Lee wrote:
> hm I am on QGIS version 2.8.2-Wien QGIS code revision exported
> Compiled against Qt 4.8.6 Running a... Giovanni Manghi

01:51 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...

Nicklas Larsson wrote:
> Although I would try track this one down if I could, I have neither means to nor experience ... Giovanni Manghi

01:50 AM Bug report #10138 (Closed): Crash in svg cache with svg symbols

closing for lack of feedback. Reopen if necessary. Giovanni Manghi

01:50 AM Bug report #10138 (Closed): Crash in svg cache with svg symbols

closing for lack of feedback. Reopen if necessary. Giovanni Manghi

01:46 AM Bug report #12228 (Closed): deadlock from parallel rendering

closing for lack of feedback. Giovanni Manghi

01:46 AM Bug report #12228 (Closed): deadlock from parallel rendering

closing for lack of feedback. Giovanni Manghi

01:40 AM Bug report #12959: No visual feedback when moving geometries with the node tool

Confirmed, it seems that this has regressed since 2.8.*. (was fine in 2.6). Giovanni Manghi

01:40 AM Bug report #12959: No visual feedback when moving geometries with the node tool

Confirmed, it seems that this has regressed since 2.8.*. (was fine in 2.6). Giovanni Manghi

01:40 AM Bug report #12959: No visual feedback when moving geometries with the node tool

Confirmed, it seems that this has regressed since 2.8.*. (was fine in 2.6). Giovanni Manghi

01:40 AM Bug report #12959: No visual feedback when moving geometries with the node tool

Confirmed, it seems that this has regressed since 2.8.*. (was fine in 2.6). Giovanni Manghi

01:40 AM Bug report #12959: No visual feedback when moving geometries with the node tool

Confirmed, it seems that this has regressed since 2.8.*. (was fine in 2.6). Giovanni Manghi

11:57 PM Bug report #12959 (Closed): No visual feedback when moving geometries with the node tool

I use the node tool when moving geometries which have to snap to other geometries. In QGIS 1.9 there is a visual feed... Paul Kanelli

01:22 AM Bug report #8037 (Closed): new openstreetmap plugin on qgis master fails to import all polygons

Fixed in master build. Mathieu Pellerin - nIRV

01:22 AM Bug report #8037 (Closed): new openstreetmap plugin on qgis master fails to import all polygons

Fixed in master build. Mathieu Pellerin - nIRV

01:11 AM Bug report #12957: Feature count doesn't show correct values for PostGIS layers after deletinge f...

Confirmed on postgis (not on shapefiles): after clicking "save" the number of features deleted is added to the featur... Giovanni Manghi

01:11 AM Bug report #12957: Feature count doesn't show correct values for PostGIS layers after deletinge f...

Confirmed on postgis (not on shapefiles): after clicking "save" the number of features deleted is added to the featur... Giovanni Manghi

01:11 AM Bug report #12957: Feature count doesn't show correct values for PostGIS layers after deletinge f...

Confirmed on postgis (not on shapefiles): after clicking "save" the number of features deleted is added to the featur... Giovanni Manghi

01:53 PM Bug report #12957 (Closed): Feature count doesn't show correct values for PostGIS layers after de...

When creating a PostGIS table (point geometry) in the "DB Manager" and adding three geometries with the QGIS "Add Fea... Paul Kanelli

12:54 AM Bug report #12956 (Feedback): DB Manager: copying a table from a PostGIS schema into another fails

I cannot confirm on qgis master on Ubuntu 14.04 and on qgis 2.8.2/master on Windows. Giovanni Manghi

12:54 AM Bug report #12956 (Feedback): DB Manager: copying a table from a PostGIS schema into another fails

I cannot confirm on qgis master on Ubuntu 14.04 and on qgis 2.8.2/master on Windows. Giovanni Manghi

12:54 AM Bug report #12956 (Feedback): DB Manager: copying a table from a PostGIS schema into another fails

I cannot confirm on qgis master on Ubuntu 14.04 and on qgis 2.8.2/master on Windows. Giovanni Manghi

10:18 AM Bug report #12956 (Closed): DB Manager: copying a table from a PostGIS schema into another fails

Using the "DB Manager" to copy a table from a PostGIS schema into another by drag and drop QGIS says "Error 5
Creatio... Paul Kanelli

12:43 AM Bug report #12950 (Feedback): Fields ignored in overlapping polygons

I cannot confirm (see attached image) using the QGIS tools available in the Processing toolbox.
Did you use the tool... Giovanni Manghi

12:43 AM Bug report #12950 (Feedback): Fields ignored in overlapping polygons

I cannot confirm (see attached image) using the QGIS tools available in the Processing toolbox.
Did you use the tool... Giovanni Manghi

12:43 AM Bug report #12950 (Feedback): Fields ignored in overlapping polygons

I cannot confirm (see attached image) using the QGIS tools available in the Processing toolbox.
Did you use the tool... Giovanni Manghi

12:40 AM Bug report #12813: Node tool on PostGIS table with null geometry causes crash

Simon Casley wrote:
> Hi - here are sample data: a (sql) dump from postgresql and the same data saved as a shapefile.... Giovanni Manghi

12:35 AM Bug report #12837 (Closed): QGIS Crashing When Connecting to datasets in MSSQL

Saber Razmjooei wrote:
> Did you check this #12324?
that should be duplicate of #10946
Please reopen if necessary. Giovanni Manghi

12:35 AM Bug report #12837 (Closed): QGIS Crashing When Connecting to datasets in MSSQL

Saber Razmjooei wrote:
> Did you check this #12324?
that should be duplicate of #10946
Please reopen if necessary. Giovanni Manghi

12:34 AM Bug report #12755 (Feedback): QGIS intermittent crash since 2.8.1

please test qgis master and report back. Giovanni Manghi

12:31 AM Bug report #12319: QGIS 2.8.1 crash when loading project

Bart Noordervliet wrote:
> Unfortunately this problem still exists in QGIS 2.8.2. It happens to me even when I delete... Giovanni Manghi

12:17 AM Bug report #4063 (Closed): georeferencer crash

I don't think that this old issue is a problem anymore, please reopen if necessary. Giovanni Manghi

12:17 AM Bug report #4063 (Closed): georeferencer crash

I don't think that this old issue is a problem anymore, please reopen if necessary. Giovanni Manghi

12:16 AM Bug report #12862: QGIS crashes after selecting a symbol

I cannot confirm on Linux and Windows. Does it happens only on your OsX machine or also others? Please leave feedback. Giovanni Manghi

12:13 AM Bug report #12311 (Closed): QGis crashes when loading WFS

S Wisu wrote:
> OK I installed qgis on my laptop (WinXP, 32bit) - there I can load the WFS without any problems.
the... Giovanni Manghi

12:13 AM Bug report #12311 (Closed): QGis crashes when loading WFS

S Wisu wrote:
> OK I installed qgis on my laptop (WinXP, 32bit) - there I can load the WFS without any problems.
the... Giovanni Manghi

12:12 AM Bug report #12832 (Closed): 2.8.2 Hard Crash - OS X.10.3

> I am using Larry Shaffer's Latest Nightly Build (Dakota Cartography) for the last hour+ and seems to be working fi... Giovanni Manghi

12:12 AM Bug report #12832 (Closed): 2.8.2 Hard Crash - OS X.10.3

> I am using Larry Shaffer's Latest Nightly Build (Dakota Cartography) for the last hour+ and seems to be working fi... Giovanni Manghi

11:54 PM Bug report #12953 (Closed): Canvas does not automatically refresh after saving layer edits

QGIS doesn't know that the layers are related. Redrawing all layers if one changes is usually not necessary, but mig... Jürgen Fischer

11:54 PM Bug report #12953 (Closed): Canvas does not automatically refresh after saving layer edits

QGIS doesn't know that the layers are related. Redrawing all layers if one changes is usually not necessary, but mig... Jürgen Fischer

11:54 PM Bug report #12953 (Closed): Canvas does not automatically refresh after saving layer edits

QGIS doesn't know that the layers are related. Redrawing all layers if one changes is usually not necessary, but mig... Jürgen Fischer

12:09 PM Bug report #12953: Canvas does not automatically refresh after saving layer edits

Just noticed the same issue appears using QGIS 2.9.0-Master on Ubuntu 15.04. Pleaese see the attached image. I've del... Paul Kanelli

10:48 AM Bug report #12953: Canvas does not automatically refresh after saving layer edits

Paul Kanelli wrote:
> When deleting or creating new geometries to buffer the PostGIS view/layer with the dynamic buff... Jürgen Fischer

09:55 AM Bug report #12953: Canvas does not automatically refresh after saving layer edits

When deleting or creating new geometries to buffer the PostGIS view/layer with the dynamic buffers isn't affected by ... Paul Kanelli

09:31 AM Bug report #12953: Canvas does not automatically refresh after saving layer edits

Paul Kanelli wrote:
> Jürgen Fischer wrote:
> > Because what you changed also has an indirect effect on other layers ... Jürgen Fischer

09:13 AM Bug report #12953: Canvas does not automatically refresh after saving layer edits

Jürgen Fischer wrote:
> Because what you changed also has an indirect effect on other layers on the postgres side?
D... Paul Kanelli

06:16 AM Bug report #12953 (Feedback): Canvas does not automatically refresh after saving layer edits

Jürgen Fischer

06:16 AM Bug report #12953: Canvas does not automatically refresh after saving layer edits

Because what you changed also has an indirect effect on other layers on the postgres side? Jürgen Fischer

05:50 AM Bug report #12953 (Closed): Canvas does not automatically refresh after saving layer edits

After saving a layer edit in QGIS 2.8.2 (Win7) I've to press F5 or change the map section to refresh the canvas. This... Paul Kanelli

03:00 PM Feature request #12958 (Open): Add Radio buttons or "option row" to the list of available widgets...

The ability to use radio buttons or an "option row" (like in IntraMaps.Roam) for relatively short lists in forms coul... Stefan Blumentrath

07:47 AM Bug report #12954 (Closed): 2.9 QGIS Browser Icon on Ubuntu 14.04 hasn't changed

I've noticed on the windows 2.9 the browser has a new icon. On 2.9 Ubuntu 14.04 (installed from QGIS Branch) it hasn'... Randal Hale

04:30 AM Bug report #12949: Problem When Doing Intersect

Tim Sutton wrote:
> Hi Giovanni
>
> I tried to show him to use v.overlay, but unfortunately QGIS package from ubuntu... Jürgen Fischer

2015-06-12

01:55 AM Bug report #12949: Problem When Doing Intersect

Tim Sutton wrote:
> Hi Giovanni
>
> I tried to show him to use v.overlay, but unfortunately QGIS package from ubuntu... Giovanni Manghi

12:43 AM Bug report #12949: Problem When Doing Intersect

Hi Giovanni
I tried to show him to use v.overlay, but unfortunately QGIS package from ubuntugis is not working with ... Tim Sutton

09:02 AM Bug report #12949 (Closed): Problem When Doing Intersect

duplicate of #11986 Giovanni Manghi

09:02 AM Bug report #12949 (Closed): Problem When Doing Intersect

duplicate of #11986 Giovanni Manghi

05:27 AM Bug report #12949: Problem When Doing Intersect

> meanwhile I'll be that if you the same operation with the v.overlay tool in the qgis/Processing toolbox you'll get... Giovanni Manghi

05:24 AM Bug report #12949 (Feedback): Problem When Doing Intersect

duplicate of #11986 ?
meanwhile I'll bet that if you the same operation with the v.overlay tool in the qgis/Processi... Giovanni Manghi

05:24 AM Bug report #12949 (Feedback): Problem When Doing Intersect

duplicate of #11986 ?
meanwhile I'll bet that if you the same operation with the v.overlay tool in the qgis/Processi... Giovanni Manghi

05:24 AM Bug report #12949 (Feedback): Problem When Doing Intersect

duplicate of #11986 ?
meanwhile I'll bet that if you the same operation with the v.overlay tool in the qgis/Processi... Giovanni Manghi

05:10 AM Bug report #12949 (Closed): Problem When Doing Intersect

Hi all,
I've a problem when I try to intersect two files (files attached), the result has some empty area.
This is ... Adi Kurniawan

10:53 PM Bug report #12952 (Closed): addition of graduated steps through histogram feature doesn't work wi...

The cool new histogram feature attached to the graduated symbology doesn't work with sized-based gratuation method.
... Mathieu Pellerin - nIRV

10:37 AM Bug report #12951 (Open): No XSD is created when exporting to GML

Giovanni Manghi

10:22 AM Bug report #12951: No XSD is created when exporting to GML

Yes Giovanni, the only problem is the lack of schema file creation, despite the option XSISCHEMA EXTERNAL and XSISCHE... Pedro Venâncio

09:25 AM Bug report #12951 (Feedback): No XSD is created when exporting to GML

is the gml without the xsd still functional? Giovanni Manghi

09:25 AM Bug report #12951 (Feedback): No XSD is created when exporting to GML

is the gml without the xsd still functional? Giovanni Manghi

09:22 AM Bug report #12951 (Closed): No XSD is created when exporting to GML

Since QGIS 2.4, when exporting a layer to GML (Save as..), the XSD file is not created (XSISCHEMA EXTERNAL).
With pr... Pedro Venâncio

09:02 AM Bug report #11986: Intersection returns the wrong result

see also #12949 Giovanni Manghi

06:35 AM Bug report #8499 (Closed): OWS tab - adding CRS restrictions not reliable

Issue does not seem present in current versions anymore. Closing now, as it seems to work fine. Andreas Neumann

06:35 AM Bug report #8499 (Closed): OWS tab - adding CRS restrictions not reliable

Issue does not seem present in current versions anymore. Closing now, as it seems to work fine. Andreas Neumann

06:34 AM Bug report #12928: Using form view to edit data, changes the attribute that uses Date/Time widget...

Just checked: works for me.
Can you check if the "field format" specified in the widget definition matches the forma... Matthias Kuhn

05:45 AM Bug report #12928 (Feedback): Using form view to edit data, changes the attribute that uses Date/...

Can you add
* the data format that you are using
* the widget configuration Matthias Kuhn

06:18 AM Bug report #8553 (Closed): Diagrams: Automated placement settings are not saved or loaded in the ...

All seems to be fine in current master. We can close this issue.
Thanks,
Andreas Andreas Neumann

06:18 AM Bug report #8553 (Closed): Diagrams: Automated placement settings are not saved or loaded in the ...

All seems to be fine in current master. We can close this issue.
Thanks,
Andreas Andreas Neumann

06:17 AM Feature request #12769: Data defined opacity for vector features

I also noticed that. I will try to implement this soon. It's also nice to have when you have an SVG marker because th... Karolina Alexiou

06:15 AM Bug report #12872: copy/paste features to same Oracle layer does not work

magnus hoeirup wrote:
> MI_PRINX is used by MapInfo as a primary key, and GeoMedia has the option to use it as a prim... Jürgen Fischer

06:13 AM Bug report #12950: Fields ignored in overlapping polygons

Screenshot: http://i.imgur.com/mN6w2V0.png Samuel Fernando Mesa Giraldo

06:05 AM Bug report #12950 (Closed): Fields ignored in overlapping polygons

The following occur when I perform the overlap between layers of polygons. Attached files for replication. The CapaA.... Samuel Fernando Mesa Giraldo

05:03 AM Bug report #12947 (Closed): qgsDoubleToString in Qgis.h error

Fixed in changeset commit:"ac38b213802919d652b062e65bd96c37c9e199ab". Matthias Kuhn

03:50 AM Bug report #12947 (Feedback): qgsDoubleToString in Qgis.h error

better submit a patch as a pull request on github? Giovanni Manghi

04:52 AM Bug report #12933: Heatmap generating an empty raster

> In addition, it might be useful to know that it does work for me when I use a radius of 0.5 map units (instead of ... Giovanni Manghi

04:52 AM Bug report #12933: Heatmap generating an empty raster

> In addition, it might be useful to know that it does work for me when I use a radius of 0.5 map units (instead of ... Giovanni Manghi

04:52 AM Bug report #12933: Heatmap generating an empty raster

> In addition, it might be useful to know that it does work for me when I use a radius of 0.5 map units (instead of ... Giovanni Manghi

04:52 AM Bug report #12933: Heatmap generating an empty raster

> In addition, it might be useful to know that it does work for me when I use a radius of 0.5 map units (instead of ... Giovanni Manghi

02:58 AM Bug report #12948 (Closed): different SVG extent in composer than in map canvas

Map canvas uses the document extent while composer renders all elements from the SVG (including those out of document... Denis Rouzaud

2015-06-11

01:21 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...

Roy Roge wrote:
> you cannot edit invalid geometries in fact, QGIS properly complains that the geometry is invalid.
... Jürgen Fischer

12:47 AM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...

Jürgen Fischer wrote:
>Did this change after merging of the new geometry classes? Apparently split parts is not gene... Roy Roge

11:29 PM Bug report #12799: QgsFeatureRequest iterator using filterRect (spatial index) lose some feature ...

Did this change after merging of the new geometry classes? Apparently split parts is not generating invalid geometr... Jürgen Fischer

01:19 AM Bug report #12872: copy/paste features to same Oracle layer does not work

Jürgen Fischer wrote:
> magnus hoeirup wrote:
> >
> > ...
> >
>
> I guess "MI_PRINX" is your primary key. The p... magnus hoeirup

01:16 AM Bug report #12947 (Closed): qgsDoubleToString in Qgis.h error

If precision is 0 the number 12000 becomes "12", probably the solution is:
inline QString qgsDoubleToString( const d... Fabio Cosimelli

12:50 AM Feature request #12946 (Open): option to separately set the transparency and contour line rubberband

Currently the line color option of rubberband does not separately set the transparency of the contour.
It would be ni... Alain FERRATON

12:43 AM Bug report #12930: Crash when deleting a column from attribute table

I could reproduce it once but not reliably.
It seems to be caused by a race-condition and repeated calling of process... Matthias Kuhn

12:41 AM Bug report #12930 (Closed): Crash when deleting a column from attribute table

Fixed in changeset commit:"fccd8e58cda97c2a11a1ad4c113ada3a21318870". Matthias Kuhn

12:31 AM Bug report #9547 (Closed): DXF does not load if file extension is missing

Renaming the file solves the issue:... Paolo Cavallini

12:31 AM Bug report #9547 (Closed): DXF does not load if file extension is missing

Renaming the file solves the issue:... Paolo Cavallini

02:19 PM Bug report #9547: DXF does not load if file extension is missing

... Jürgen Fischer

02:19 PM Bug report #9547: DXF does not load if file extension is missing

... Jürgen Fischer

02:19 PM Bug report #9547: DXF does not load if file extension is missing

... Jürgen Fischer

08:09 PM Bug report #12945 (Closed): Oblique mercator projection missing +no_uoff in srs.db

The proj4 text for the oblique mercator projection GDBD2009 (EPSG 5247) is missing the parameter @+no_uoff@ in srs.db... Alex Cobb

02:03 PM Bug report #10632 (Closed): Cannot rename connection name (PostGIS, WMS, WFS) in other case

Fixed in changeset commit:"5bf316fec6ab3b727e7ed4c97cda2c6cfc52f623". Jürgen Fischer

01:30 PM Bug report #12933: Heatmap generating an empty raster

Thanks for looking at this.
In QGIS, I saved the point layer that I loaded from Sql Server as an ESRI shapefile. I ... David Vanescentes

07:11 AM Bug report #12933 (Feedback): Heatmap generating an empty raster

does the outcome changes if you use a different data format? if the result is the same can you attach (or link, or sh... Giovanni Manghi

07:11 AM Bug report #12933 (Feedback): Heatmap generating an empty raster

does the outcome changes if you use a different data format? if the result is the same can you attach (or link, or sh... Giovanni Manghi

07:11 AM Bug report #12933 (Feedback): Heatmap generating an empty raster

does the outcome changes if you use a different data format? if the result is the same can you attach (or link, or sh... Giovanni Manghi

10:35 AM Bug report #12434 (Closed): Wrong order in table

Fixed in changeset commit:"d3c4da0b66f70efdf0b2fcff4075395686f72203". Jürgen Fischer

09:53 AM Bug report #12733 (Closed): Layer order list corrupted if a layer reference can't be resolved

Fixed in changeset commit:"78c60a297c64f87b2c7fd15801a3c62d8af92cb0". Jürgen Fischer

09:46 AM Feature request #12944 (Open): PostGIS: use fallback_application_name instead of application_name

In the source code of QGIS 2.8, I can see that after opening a PostGIS connection, QGIS calls:
SET application_nam... Jerome P

08:52 AM Bug report #12943: Vertex markers size incremented by 2 instead of 1

see "PR 2132":https://github.com/qgis/QGIS/pull/2132 Harrissou Santanna

08:47 AM Bug report #12943 (Closed): Vertex markers size incremented by 2 instead of 1

In Settings menu > Options > Digitizing Tab, the value of marker size can only be incremented by 2. Harrissou Santanna

08:42 AM Feature request #12942 (Closed): Document Clip option in Raster Renderer - Singleband pseudocolor

Please,
Document *Clip* option in +QgsRasterLayerProperties+ - +Raster Renderer+ - +Singleband pseudocolor+
This ... Jack Attack

08:21 AM Bug report #12841 (Closed): Save as shapefile fails on PostGIS layer with joined MSSQL Table

Fixed in changeset commit:"8d0c28117641c6d9826bf31ce614994ffdb00287". Jürgen Fischer

08:01 AM Bug report #12886 (Feedback): delete part has no effect on single geometries

Marco Hugentobler

07:47 AM Feature request #12941 (Closed): Saving Processing log

It is rather common for an user to want to save all the output for future reference and inspection. Selecting all, co... Paolo Cavallini

07:34 AM Bug report #6515: values in "value map" edit widget are always treated as text

Jürgen Fischer wrote:
> I don't see an issue with that. The descriptions/values/second column in the edit widget fie... Giovanni Manghi

07:33 AM Bug report #12940 (Closed): Advanced digitizing doesn't work when coordinates are given

It is currently impossible (QGIS 2.8.2) to use the new advanced digitizing tool to digitize a normal square. I'm usin... Jérôme Guélat

07:30 AM Bug report #12494 (Open): value relation widget, wrong sorting of text

Jürgen Fischer wrote:
> What's shown in the combobox is supposed to be a description for the key used in the attribut... Giovanni Manghi

07:30 AM Bug report #12494 (Open): value relation widget, wrong sorting of text

Jürgen Fischer wrote:
> What's shown in the combobox is supposed to be a description for the key used in the attribut... Giovanni Manghi

07:26 AM Bug report #12745: processing python error

Paolo Cavallini wrote:
> In this case, better rename the category (a blocker that does not block does not make much s... Giovanni Manghi

07:22 AM Bug report #12745: processing python error

In this case, better rename the category (a blocker that does not block does not make much sense, right?).
:) Paolo Cavallini

07:14 AM Bug report #12745: processing python error

Paolo Cavallini wrote:
> Are we sure this is a blocker?
a blocker is by definition a regression, and this is a regre... Giovanni Manghi

07:12 AM Bug report #12745: processing python error

Are we sure this is a blocker? Paolo Cavallini

07:21 AM Bug report #12929: XML file freezes QGIS 2.8.2/master

... Jürgen Fischer

07:21 AM Bug report #12929: XML file freezes QGIS 2.8.2/master

... Jürgen Fischer

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:01 AM Bug report #12929 (Open): XML file freezes QGIS 2.8.2/master

Confirmed on Windows. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:53 AM Bug report #12935 (Open): 2.2 GB GeoJson file crashes qgis

it does crash qgis (that starts eating up memory while trying to open the file), but it does also crash ogrinfo. Giovanni Manghi

06:50 AM Feature request #12939: make the field calculator compute areas and lengths in units other than m...

see also #2402 and #10170 Giovanni Manghi

06:18 AM Feature request #12939: make the field calculator compute areas and lengths in units other than m...

afaik values are computed in layer CRS, once you know is not difficult to keep it in mind. Values are always in map u... Giovanni Manghi

06:18 AM Feature request #12939: make the field calculator compute areas and lengths in units other than m...

afaik values are computed in layer CRS, once you know is not difficult to keep it in mind. Values are always in map u... Giovanni Manghi

06:18 AM Feature request #12939: make the field calculator compute areas and lengths in units other than m...

afaik values are computed in layer CRS, once you know is not difficult to keep it in mind. Values are always in map u... Giovanni Manghi

06:18 AM Feature request #12939: make the field calculator compute areas and lengths in units other than m...

afaik values are computed in layer CRS, once you know is not difficult to keep it in mind. Values are always in map u... Giovanni Manghi

05:49 AM Feature request #12939 (Closed): make the field calculator compute areas and lengths in units oth...

For now, you need a faculty and a degree to find out a simple thing, how many kilometers or meters does a way have.
... baditaflorin -

05:55 AM Bug report #12747: [OSX] problem with composer grids and frames

Ohw! :o
OK, Sorry! ;)
I wait and i'll try with the 2.10 version when it come out! ^^ ;)
delinte thibault

05:13 AM Bug report #12747: [OSX] problem with composer grids and frames

> So now i install the next version QGIS 2-8-2 and it don't work again! :/
the eventual fix is available in qgis ma... Giovanni Manghi

02:09 AM Bug report #12747: [OSX] problem with composer grids and frames

Hello,
Sorry for this late answer but i finish a big project QGIS for the end of my year and I was waiting the datel... delinte thibault

05:45 AM Bug report #12938 (Closed): DB Manager adds invisible layers to TOC during layer preview and does...

Open DB Manager, connect to the PostgGIS database (haven't testet on Spatialite), select table that have geometry col... Yury Ryabov

05:10 AM Feature request #5029 (Closed): Custom toolbars

I think that this very nice plugin does exactly was requested. Giovanni Manghi

05:10 AM Feature request #5029 (Closed): Custom toolbars

I think that this very nice plugin does exactly was requested. Giovanni Manghi

04:41 AM Feature request #5029: Custom toolbars

Check this plugin :http://plugins.qgis.org/plugins/CustomToolBar/
Thanks Francisco Raga

03:04 AM Feature request #12937 (Closed): Distance to nearest hub tool : Round distance

In the +Vector analysis tools+,
In the +Distance to nearest hub+ tool,
+Currently+ : You can choose your unit (meter... Jack Attack

2015-06-10

01:08 AM Bug report #12929: XML file freezes QGIS 2.8.2/master

Giovanni Manghi wrote:
> sure you added the right file?
> here it returns exactly what you expect
>
> Invalid Data S... baditaflorin -

01:05 AM Bug report #12935: 2.2 GB GeoJson file crashes qgis

Giovanni Manghi wrote:
> any chance to share the file?
> any chance you can leave feedback on #12929 ?
Here is the d... baditaflorin -

12:49 AM Bug report #12935 (Feedback): 2.2 GB GeoJson file crashes qgis

Giovanni Manghi

12:48 AM Bug report #12935: 2.2 GB GeoJson file crashes qgis

any chance to share the file?
any chance you can leave feedback on #12929 ?
Giovanni Manghi

12:45 AM Bug report #12935 (Closed): 2.2 GB GeoJson file crashes qgis

I am not sure if the file is complete, is was downloaded via QuickOSM plugin, but not sure if it completed.
The idea... baditaflorin -

12:08 AM Bug report #6515: values in "value map" edit widget are always treated as text

I don't see an issue with that. The descriptions/values/second column in the edit widget field config dialog should ... Jürgen Fischer

04:11 PM Bug report #11845: QGIS startup is slow on windows with --configpath option

hmm I'm seeing this now too and it only just started. Very strange. Seeing the same stuff in the logs. Nathan Woodrow

03:44 PM Bug report #12494 (Feedback): value relation widget, wrong sorting of text

What's shown in the combobox is supposed to be a description for the key used in the attribute. Isn't using a number... Jürgen Fischer

03:40 PM Bug report #12421 (Closed): QGIS form : range with decimal > rounding by saving project ?

Fixed in changeset commit:"91e44eafea2729bda02db8ac55d50fc54b8e0e56". Jürgen Fischer

03:29 PM Bug report #12933: Heatmap generating an empty raster

I should upload the geotiff raster file it produces as well.
In addition, it might be useful to know that it does wo... David Vanescentes

03:12 PM Bug report #12933: Heatmap generating an empty raster

This is part 2 of the database backup file. Join this with "heatmap_data.bak.001" using HJ Split (or some other prog... David Vanescentes

03:10 PM Bug report #12933: Heatmap generating an empty raster

It didn't include my database backup file because it was too big I guess (6 MB). I am splitting the file up into chu... David Vanescentes

03:06 PM Bug report #12933 (Closed): Heatmap generating an empty raster

I am trying to create a heatmap raster using a point layer loaded from sql server. This is working with some setting... David Vanescentes

11:29 AM Bug report #12625 (Closed): Difficult to set value in drop down list in table column

not reproducable on master. closing for the lack of feedback. Jürgen Fischer

11:29 AM Bug report #12625 (Closed): Difficult to set value in drop down list in table column

not reproducable on master. closing for the lack of feedback. Jürgen Fischer

10:43 AM Feature request #12932 (Closed): Better "Invalid Layer" error message

When loading spatial data from SQL Server, if the data doesn't conform to the input requirements a message is display... David Vanescentes

10:26 AM Bug report #12931 (Feedback): "Calendar popup" Not Populating If Today is Clicked

I just tested on qgis master on ubuntu 14.04 and it seems to work fine here. Can you attach a sample project/data? th... Giovanni Manghi

06:57 AM Bug report #12931 (Closed): "Calendar popup" Not Populating If Today is Clicked

Using a date field, setting the Edit widget to Date/Time, and enabling the 'calendar popup' widget, I am unable to cl... Darren Cope

07:37 AM Bug report #12927 (Closed): Installazione terminata con un errore

Hi, the error is thrown by a 3rd party plugin (qgis cloud) not qgis itself. Note: issues here must be filed in english. Giovanni Manghi

07:37 AM Bug report #12927 (Closed): Installazione terminata con un errore

Hi, the error is thrown by a 3rd party plugin (qgis cloud) not qgis itself. Note: issues here must be filed in english. Giovanni Manghi

07:35 AM Bug report #12930 (Feedback): Crash when deleting a column from attribute table

I cannot confirm on ubuntu 14.04 and qgis master installed from the nightly builds repo. Giovanni Manghi

07:35 AM Bug report #12930 (Feedback): Crash when deleting a column from attribute table

I cannot confirm on ubuntu 14.04 and qgis master installed from the nightly builds repo. Giovanni Manghi

02:18 AM Bug report #12930 (Closed): Crash when deleting a column from attribute table

QGIS crashes when deleting a column from a shapefile attribute table using the *Delete column (Crtl L)* tool in the a... Frank Sokolic

04:46 AM Bug report #9081 (Closed): Raster calculator result is not accurate

Fixed in changeset commit:"f42f640d3025742911e6edb1d018945f67a38438". Nyall Dawson

04:46 AM Feature request #3649 (Closed): Raster calculator should work on raster files in different CRS

Fixed in changeset commit:"559d7bb943f02660694b37a701d8483106011df1". Nyall Dawson

04:46 AM Bug report #12450 (Closed): Raster Calculator giving bogus values

Fixed in changeset commit:"559d7bb943f02660694b37a701d8483106011df1". Nyall Dawson

04:46 AM Bug report #7589 (Closed): Raster Calculator error over band number 9

Fixed in changeset commit:"5d50af0407c375ec7e690bf2f82596e3ca304740". Nyall Dawson

2015-06-09

01:58 AM Bug report #12057: Computed area is wrong when reprojection is active

Giovanni Manghi wrote:
> this does not make sense at all (mixing a layer with a geographic CRS and nother with a proj... Stefan Blumentrath

01:45 AM Bug report #12929 (Feedback): XML file freezes QGIS 2.8.2/master

sure you added the right file?
here it returns exactly what you expect
Invalid Data Source: /home/giovanni/Downloads... Giovanni Manghi

01:40 AM Bug report #12929 (Closed): XML file freezes QGIS 2.8.2/master

I know that this is a bad file. I was trying to extract a json from overpass-turbo but got a xml file
I think that th... baditaflorin -

01:31 AM Bug report #12387 (Closed): Value map fields are always treated as text

Jürgen Fischer

12:50 AM Bug report #12335: Processing can't find SAGA in Debian [regression]

Yes, 2.1.2. I'll investigate it later this week. Borys Jurgiel

12:42 AM Bug report #12335: Processing can't find SAGA in Debian [regression]

Borys Jurgiel wrote:
> Sorry, it's a pitty the hub doesn't send any email notification when the status is changed to ... Giovanni Manghi

12:37 AM Bug report #12335 (Feedback): Processing can't find SAGA in Debian [regression]

Jürgen Fischer

12:30 AM Bug report #12928 (Closed): Using form view to edit data, changes the attribute that uses Date/Ti...

Using QGIS 2.8.1 (64 bit) on Windows using Esri Shape file.
I have 2 data fields that uses the date/time widgit. One ... Nhung Seidensticker

12:15 AM Bug report #12927 (Closed): Installazione terminata con un errore

Buongiorno,
ho provato ad installare qgis 2.8.2 sul mio pc.
Sistema operativo windows 7 32 bit
Alla fine dell'insta... Paolo Orlandi

12:14 AM Bug report #12847: virtual layer query in DBmanager throws error

Sorry for that, I thought it was in core.
Cheers
Regis Haubourg

01:14 PM Bug report #12847 (Closed): virtual layer query in DBmanager throws error

third party plugin. Maybe file a ticket "here":https://github.com/mhugo/qgis_vlayers/issues Jürgen Fischer

01:14 PM Bug report #12847 (Closed): virtual layer query in DBmanager throws error

third party plugin. Maybe file a ticket "here":https://github.com/mhugo/qgis_vlayers/issues Jürgen Fischer

11:08 PM Feature request #12926 (Closed): Improve attribute table performance

Loading a large (pg) table requires the loading of all records. This is a real performance killer, and effectively pr... Paolo Cavallini

07:57 PM Bug report #12924 (Closed): Sql Server Point Layer

Closing this request but you can open another one about better error messages for this case (assign it to me, it's on... Nathan Woodrow

07:57 PM Bug report #12924 (Closed): Sql Server Point Layer

Closing this request but you can open another one about better error messages for this case (assign it to me, it's on... Nathan Woodrow

07:03 PM Bug report #12924: Sql Server Point Layer

David Vanescentes wrote:
> Nathan Woodrow wrote:
> > Do you have a int based primary key on the table?
>
> I do not ... David Vanescentes

06:51 PM Bug report #12924: Sql Server Point Layer

Nathan Woodrow wrote:
> Do you have a int based primary key on the table?
I do not (the first column is a unique int... David Vanescentes

06:33 PM Bug report #12924 (Feedback): Sql Server Point Layer

Nathan Woodrow

06:33 PM Bug report #12924: Sql Server Point Layer

Do you have a int based primary key on the table? Nathan Woodrow

06:31 PM Bug report #12924 (Closed): Sql Server Point Layer

I just downloaded and installed QGIS a few days ago (version 2.8.2-Wien). I tried pulling in spatial data from sql se... David Vanescentes

06:45 PM Bug report #8553 (Feedback): Diagrams: Automated placement settings are not saved or loaded in th...

Is this still an issue? Nyall Dawson

04:09 PM Bug report #12923 (Closed): Project with SQL Server Layers opens much slower in 2.8 than 2.6

I have a project that contains many sql server layers. In version 2.6 it opened in about 20 seconds in version 2.8.1 ... Jason Moore

02:58 PM Bug report #12525 (Closed): Field calculator preview updates layout to a really big unusable wind...

duplicate of #12433 Jürgen Fischer

02:58 PM Bug report #12525 (Closed): Field calculator preview updates layout to a really big unusable wind...

duplicate of #12433 Jürgen Fischer

02:38 PM Bug report #12654 (Closed): Remove geographical operations on table layers

Fixed in changeset commit:"3d193e3026922620d1461eaa41336b49a3dcca77". Jürgen Fischer

02:21 PM Bug report #11350 (Closed): Raster Calculator not giving the correct raster from a slope percenta...

An expression like:
("slope%@1" <= 8 ) * "slope%@1"
will work Nyall Dawson

02:21 PM Bug report #11350 (Closed): Raster Calculator not giving the correct raster from a slope percenta...

An expression like:
("slope%@1" <= 8 ) * "slope%@1"
will work Nyall Dawson

02:12 PM Bug report #12785 (Closed): Adding spatialite layer to project data gets corrupted(?)

Fixed in changeset commit:"b736317005c2417ffc037bbc3969a2b180c49dd7". Jürgen Fischer

02:07 PM Bug report #12922 (Closed): Join Attributes by Location does not intersect / return data

Using QGIS 2.8.2, Processing 2.9.3 - Attempting to join point data to polygons. Works fine when using Vector>Data Man... mike t

01:47 PM Bug report #12872 (Feedback): copy/paste features to same Oracle layer does not work

magnus hoeirup wrote:
> Could not commit changes to layer F_KIRKEGD_GRAVSTEDER
> Errors: ERROR: 1 feature(s) not ad... Jürgen Fischer

01:34 PM Bug report #11298 (Feedback): customize render combobox

not reproducable with master Jürgen Fischer

01:04 PM Bug report #12393 (Closed): GPS information panel, dialogue "Satellite "crashes QGIS 2.8 (regress...

Fixed in changeset commit:"014f0703fef04c63cb1f46bca52562e85d28ce96". Jürgen Fischer

12:26 PM Bug report #12502: processing:runalg locks input file

When running a script, there is a lock on files created by processing.runalg(). This happens in several algorithms, o... Julio Novoa

11:30 AM Bug report #11545 (Closed): Categorized/graduated symbology does not work for a virtual field com...

Fixed in changeset commit:"fa89e292cef8798cf11b3800aec88b3c4e53cde8". Jürgen Fischer

10:16 AM Bug report #10498: Better resize the width of textbox and title in Properties of items in Print C...

Hi,
Can someone review and tell if this is the way this bug should be fixed, please? The GUI is not really readable f... Harrissou Santanna

09:59 AM Bug report #12920 (Closed): Mac OS X : Spinboxes are partly greyed

As shown in the screenshot attached, all the spinboxes in the Print composer's tabs are partly greyed at the right si... Harrissou Santanna

09:38 AM Bug report #11997 (Closed): QGIS hangs importing a shapefile into spatialite

Fixed in changeset commit:"3646e35827da5b6e1e03a9375aa2845fb013bdaa". Jürgen Fischer

09:01 AM Bug report #12118: Advanced digitizing toolbar not shown on first install

I agree that it should be checked by default. In fact, it should not even be called Advanced, as it includes pretty b... Paolo Cavallini

09:01 AM Bug report #12118: Advanced digitizing toolbar not shown on first install

I agree that it should be checked by default. In fact, it should not even be called Advanced, as it includes pretty b... Paolo Cavallini

09:01 AM Bug report #12118: Advanced digitizing toolbar not shown on first install

I agree that it should be checked by default. In fact, it should not even be called Advanced, as it includes pretty b... Paolo Cavallini

08:56 AM Bug report #12118 (Feedback): Advanced digitizing toolbar not shown on first install

AFAICT it's not initially checked (renamed UI/state to test) and when you check it appears. Jürgen Fischer

08:05 AM Bug report #12488 (Closed): Impossible to merge features in a point shapefile

Fixed in changeset commit:"8289891b78953581f22e944565e0e1c9678a09c3". Jürgen Fischer

07:20 AM Bug report #12895: QGIS 2.8.1 freezes when saving data

I've tried clearing the .qgis2 folder before but that didn't seem to work. Within a few days I expect I'll have some ... Eric Stewart

05:58 AM Bug report #12885 (Closed): cannot add part to empty geometries anymore

Works for me,
thank you! Matthias Kuhn

05:58 AM Bug report #12885 (Closed): cannot add part to empty geometries anymore

Works for me,
thank you! Matthias Kuhn

05:47 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Create Geometry Table : http://paste.opensuse.org/93583864
Create Attribute Table : http://paste.opensuse.org/6971444... Nicolas Rochard

05:32 AM Bug report #10965 (Closed): Raster calculator always returns float32 tiffs

Duplicate of #4475 Nyall Dawson

05:32 AM Bug report #10965 (Closed): Raster calculator always returns float32 tiffs

Duplicate of #4475 Nyall Dawson

04:31 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

ok. I cannot confirm the issue using the attached dataset on 2.8.2 (ubuntu 14.04) and applying the algorithm from the... Jakob Hvitnov

04:19 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

I tried with geoalgorithm "Select Bylocation" from processing toolbox and it doesn't work for this data set. Attached... Nag R

02:58 AM Bug report #12918 (Closed): QGIS freezes when wheelzooming WMS layer via authenticating proxy

Note that this issue is very similar to a bug which was reported on the mailinglist (I have not found it in trac):
ht... johanvdw -

02:35 AM Bug report #12917 (Closed): No possibility for rotation of font symbol by attribute value when us...

If I have a point symbol which I'd like to use a font symbol for, I can only use categorized instead of Rule-based sy... Oskar Karlin

2015-06-08

01:27 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

Using the QGIS geoalgorithm "Select by location" from the processing toolbox works as expected. As I understand it th... Jakob Hvitnov

11:46 PM Bug report #12906 (Open): Spatial Query: silently do not select geometries with errors

> It looks something really to be tuned in QGIS to handle this sort of issues.
>
I edited the title to better desc... Giovanni Manghi

11:46 PM Bug report #12906 (Open): Spatial Query: silently do not select geometries with errors

> It looks something really to be tuned in QGIS to handle this sort of issues.
>
I edited the title to better desc... Giovanni Manghi

11:46 PM Bug report #12906 (Open): Spatial Query: silently do not select geometries with errors

> It looks something really to be tuned in QGIS to handle this sort of issues.
>
I edited the title to better desc... Giovanni Manghi

09:00 PM Bug report #12906: Spatial Query: silently do not select geometries with errors

Yes, in my research most of the times i deal with this type of complex data sets and some times i see difficulty usin... Nag R

07:58 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

Oh what a beautiful polygon! It has one self-intersection at
POINT (-125.25977653693093 48.92186621734039). I tried ... Jukka Rahkonen

06:29 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

Nag R wrote:
> Sample data is attached.
>
> I reproduced the issue using this data set.
>
> Thanks
the polygon has... Giovanni Manghi

05:30 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

Sample data is attached.
I reproduced the issue using this data set.
Thanks Nag R

05:30 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

Sample data is attached.
I reproduced the issue using this data set.
Thanks Nag R

04:21 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

I also cannot confirm. Attaching sample data would be very appreciated. Giovanni Manghi

04:19 AM Bug report #12906 (Feedback): Spatial Query: silently do not select geometries with errors

Giovanni Manghi

04:17 AM Bug report #12906: Spatial Query: silently do not select geometries with errors

I made a test with one polygon and one line which I digitized with QGIS 2.6.0 but I couldn't reproduce the issue. Cou... Jukka Rahkonen

12:33 AM Bug report #12885: cannot add part to empty geometries anymore

This should work with current master branch. Could you check? Marco Hugentobler

12:32 AM Bug report #12886: delete part has no effect on single geometries

This should work with current master branch. Could you check? Marco Hugentobler

12:30 AM Bug report #12335: Processing can't find SAGA in Debian [regression]

Sorry, it's a pitty the hub doesn't send any email notification when the status is changed to feedback.
Now in maste... Borys Jurgiel

11:47 PM Bug report #12335 (Closed): Processing can't find SAGA in Debian [regression]

closing for lack of feedback. Giovanni Manghi

11:47 PM Bug report #12335 (Closed): Processing can't find SAGA in Debian [regression]

closing for lack of feedback. Giovanni Manghi

08:04 PM Bug report #11399: Unable to add raster and vector files via drag and drop on OS X 10.10

Hi,
This can be fixed for Qt 4.8.x, but requires direct access to the Cocoa API when needed to introduce the workaro... Larry Shaffer

03:36 PM Bug report #11755: Real precision (Shapefile)

See "PR !#2122":https://github.com/qgis/QGIS/pull/2122 Jürgen Fischer

03:19 PM Bug report #12911: Path offset doesnt work in nightly

Actually it's not a geometry related regression - it seems tied to certain snapping configuration options. Nyall Dawson

02:12 PM Bug report #12911: Path offset doesnt work in nightly

Confirmed on linux. Nyall Dawson

02:12 PM Bug report #12911: Path offset doesnt work in nightly

Confirmed on linux. Nyall Dawson

08:54 AM Bug report #12911 (Closed): Path offset doesnt work in nightly

In the nightly ea31c68 path offsets doesn't work. Downloaded today (june 8) from http://dakotacarto.com Oskar Karlin

02:51 PM Bug report #12899 (Closed): Spatialite layer - impossible save edits with multiple selections field

@INTEGER@ columns cannot contain multiple selections. Use text fields (like the tmp from the working layer). Jürgen Fischer

02:51 PM Bug report #12899 (Closed): Spatialite layer - impossible save edits with multiple selections field

@INTEGER@ columns cannot contain multiple selections. Use text fields (like the tmp from the working layer). Jürgen Fischer

02:38 PM Bug report #12461 (Closed): Unable to commit date changes to MSSQL table in 2.8.1 Wien

Fixed in changeset commit:"018cdd25da8d826ad6eddea77f6605330e94d902". Jürgen Fischer

02:31 PM Bug report #12909 (Closed): Can't edit new features without "ChangeAttributeValue"/"ChangeGeometr...

Jürgen Fischer

09:00 AM Bug report #12909 (In Progress): Can't edit new features without "ChangeAttributeValue"/"ChangeGe...

Jürgen Fischer

08:53 AM Bug report #12909 (Closed): Can't edit new features without "ChangeAttributeValue"/"ChangeGeometr...

Fixed in changeset commit:"77bf10b752a264342653b4a953cf389ed5c28714". Jürgen Fischer

05:54 AM Bug report #12909 (Closed): Can't edit new features without "ChangeAttributeValue"/"ChangeGeometr...

I'm using PostgreSQL 9.3 with PostGIS 2.1 x86
I have a table with +*insert only*+ permissions (id (pkey integer auto-... Bruno Moreira

01:06 PM Bug report #11425 (Closed): make check: 12 tests failed out of 113

Closing this as Travis is a better solution for tracking failing tests Nyall Dawson

01:06 PM Bug report #11425 (Closed): make check: 12 tests failed out of 113

Closing this as Travis is a better solution for tracking failing tests Nyall Dawson

12:13 PM Bug report #12690 (Closed): Snapping do not work for new features after save edits on oracle spat...

Jürgen Fischer

12:08 PM Bug report #12690 (Feedback): Snapping do not work for new features after save edits on oracle sp...

Not reproducable in master or 2.8.2 Jürgen Fischer

12:08 PM Bug report #12690 (Feedback): Snapping do not work for new features after save edits on oracle sp...

Not reproducable in master or 2.8.2 Jürgen Fischer

12:05 PM Bug report #11281 (Closed): GEOS 3.4.2-CAPI-1.8.2 r3921 cause "invalid literal for int() with b...

Looks like a Shapely issue and no QGIS problem Jürgen Fischer

12:05 PM Bug report #11281 (Closed): GEOS 3.4.2-CAPI-1.8.2 r3921 cause "invalid literal for int() with b...

Looks like a Shapely issue and no QGIS problem Jürgen Fischer

05:36 AM Bug report #11281: GEOS 3.4.2-CAPI-1.8.2 r3921 cause "invalid literal for int() with base 10: '...

Hi Jürgen Fischer
It occures during plugins instalations, like contour.py
Error:... julio cesar de menezes

09:01 AM Bug report #12912 (Closed): Switching line/area measure do not remove lines/areas on close

If I measure a line, and then without closing the dialogue, switch to measure an area (or vice versa) the dialogue ch... Klas Karlsson

08:10 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

> I'me gonna to reinstall QGIS 2.4 and done what you've asked.
just post here the query (not as screenshot) and the... Giovanni Manghi

07:04 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Sorry, my fault, I was talking about a WHERE clause and not WHEN.
I send most simply query for example. But if my uni... Nicolas Rochard

06:53 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Did anyone spot a @WHEN@ yet? BTW I find the screenshot not very helpful.
Why not the @CREATE TABLE@s for all tabl... Jürgen Fischer

05:34 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Yes it able to display in QGIS
In attachment, query as simple as possible and both table display in dbmanager.
Resul... Nicolas Rochard

05:34 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Yes it able to display in QGIS
In attachment, query as simple as possible and both table display in dbmanager.
Resul... Nicolas Rochard

05:34 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Yes it able to display in QGIS
In attachment, query as simple as possible and both table display in dbmanager.
Resul... Nicolas Rochard

04:50 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

> Reinstall 2.4 version, it works :S
does this means that the same query with the same tables works on qgis 2.4?
... Giovanni Manghi

03:29 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Could you have the screenshot from DB Manager in QGIS like the ones I have attached.
!dbManager.PNG! Saber Razmjooei

07:44 AM Bug report #12578: Large pause before snapping to large layer

It might be related to the creation of the index for snapping. Paolo Cavallini

05:10 AM Bug report #12578: Large pause before snapping to large layer

Possibly related:
* load a large layer
* add a new empty layer (either shp or in memory)
This takes an enormous amoun... Paolo Cavallini

07:29 AM Bug report #12910 (Closed): Move rotated canvas with arrow keys according to rotation

Happily using the new rotatable maps canvas for digitizing scanned and overcrowded field maps with a lot entries in d... Bernd Vogelgesang

06:55 AM Bug report #12740: Algorithms sometimes disappear from the toolbox

i am raising the priority of this to Blocker
The issue seems to be in the SAGA provider, that sometimes is not corre... Victor Olaya

06:46 AM Feature request #3296 (Closed): Areas and length from field calculator are different to derived o...

this should be fixed in master, please reopen if necessary. Giovanni Manghi

06:46 AM Feature request #3296 (Closed): Areas and length from field calculator are different to derived o...

this should be fixed in master, please reopen if necessary. Giovanni Manghi

06:43 AM Bug report #12057: Computed area is wrong when reprojection is active

Stefan Blumentrath wrote:
> GRASS 6.4.4 gives also 3 447,087 km2 for the Parma-Polygon.
> That is good news for those... Giovanni Manghi

05:51 AM Bug report #12057: Computed area is wrong when reprojection is active

GRASS 6.4.4 gives also 3 447,087 km2 for the Parma-Polygon.
That is good news for those who turn off OTF or manually... Stefan Blumentrath

05:03 AM Bug report #12057: Computed area is wrong when reprojection is active

> So, the question is: How is OTF supposed to affect measurements?
I'll be back on this a little later. Cheers. Giovanni Manghi

05:02 AM Bug report #12057: Computed area is wrong when reprojection is active

> Do you really consider this bug properly fixed so the ticket can be closed? It seems that I am not the only one wh... Giovanni Manghi

04:59 AM Bug report #12057: Computed area is wrong when reprojection is active

Stefan Blumentrath wrote:
> BTW, SAGA gives for your Parma-polygon also 3 447,087 km2. I can compare other tools too ... Giovanni Manghi

05:10 AM Bug report #12507 (Closed): Browser connections issues in master

Fixed in changeset commit:"402df0323e81b53c81d472b8376b6a0c8fb57eed". Jürgen Fischer

04:35 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

Maybe this is related? Applying the Processing buffer on a memory layer returns an error:... Paolo Cavallini

04:29 AM Bug report #12894 (Open): Processing: memory layers saved using QGIS tools have all attributes co...

Giovanni Manghi

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:06 AM Bug report #12894: Processing: memory layers saved using QGIS tools have all attributes converted...

All in Processing
See screenshots tested with dissolve, polygon centroid and save selected feature as script.
Giova... Nicolas Rochard

02:53 AM Bug report #12880 (Closed): Reshape tool throws exception

Confirmed fixed with the addition of 2948c45cba7358713e940b87ce0519185f6b0cc2 Nyall Dawson

02:49 AM Bug report #12907 (Closed): Add a line in the modeler between a vector layer parameter and a tabl...

When you create a table field parameter in the modeler, you need to define which vector layer parameter you will use.... Etienne Trimaille

2015-06-07

01:56 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Here are screenshot from my table on pgadmin.
Primary key are define, see nothing strange.
Reinstall 2.4 version, it ... Nicolas Rochard

01:56 AM Bug report #12892: Can't load table from SQL editor in DBManager with 'WHERE' argument

Here are screenshot from my table on pgadmin.
Primary key are define, see nothing strange.
Reinstall 2.4 version, it ... Nicolas Rochard

01:16 AM Bug report #12906 (Closed): Spatial Query: silently do not select geometries with errors

*New description:*
the spatial query tool silently do not select geometries with errors (or at least geometries with... Nag R

01:16 AM Bug report #12905 (Closed): processing: output in formats different from default (shp/tif) do not...

It seems that recently the ability to save outputs in formats different from the default (shp, tif) is not working as... Giovanni Manghi

01:01 AM Bug report #9902 (Closed): Using v.voronoi with "output tessellation as graph" returns point result

Giovanni Manghi

01:00 AM Bug report #12891 (Closed): QGIS Won't Open

Saber Razmjooei wrote:
> Could you rename your .qgis2 folder under your user folder and try to open QGIS again?
The ... Amy Butler

01:00 AM Bug report #12891 (Closed): QGIS Won't Open

Saber Razmjooei wrote:
> Could you rename your .qgis2 folder under your user folder and try to open QGIS again?
The ... Amy Butler

12:50 AM Bug report #12874: [Composer] DEL button doesn't remove items from the print composer on Mac OS X

yes, it does. Harrissou Santanna

12:04 AM Bug report #12880: Reshape tool throws exception

@Nyall: fixed with commit:77d68b0d6c63e7b03e7b265e9ff662b3c48705ed ? Marco Hugentobler

« Previous

Next »