Activity
From 2017-10-28 to 2017-11-26
2017-11-26
- 09:11 PM Revision 193ead73 (qgis): Fix german translation (superceeds PR#5730)
- 09:01 PM Revision 731b57c8 (qgis): Add Cancel and Help buttons to Property assistant dialog
- because sometimes opening this dialog is a mistake and you want to close it
Also enable the Help capability - 09:01 PM Revision 4f9e2a5f (qgis): Do not change property widget status if the dialog is rejected
- refs #16766
- 08:57 PM Revision 54b51653 (qgis): Make frames expandable and cover needed space
- 08:55 PM Revision 62d71154 (qgis): Set a title to the 3D config widget
- 08:54 PM Revision 41089f28 (qgis): Add spell check variants for tessellate
- 08:54 PM Revision 006da6e3 (qgis): Move conversion of tesselation to multipolygon to QgsTessellator
- Also
- add unit test
- fix bad tesselation due to missing origins - 08:54 PM Revision c0e732b7 (qgis): [processing] Add QGIS 3d provider
- Adds a new QGIS processing provider for 3d algorithms, available
only when QGIS is built WITH_3D
Currently includes ... - 08:38 PM Revision 8c211f28 (qgis): Fix failing doc test
- 08:38 PM Revision 3310343b (qgis): [processing] Add a model-only "load layer to project" algorithm
- This can be used to force loading a layer into the current project.
The primary use case here is to load a preset lay... - 08:38 PM Revision bb63a83e (qgis): Add missing output from package algorithm
- 08:38 PM Revision 6283ca62 (qgis): [processing] Add a model-only algorithm for renaming layers
- This is required for algorithms with behaviour which depends on the
layer names (e.g. the package algorithm uses the ... - 08:38 PM Revision 3d307b41 (qgis): Improve name of memory layers output from processing
- 08:38 PM Revision aef0d33e (qgis): Fix definition of output file parameters
- 08:38 PM Revision 4b9986eb (qgis): [processing] Add a generic map layer output type
- For occasions when an algorithm creates a map layer, but the type
is not known in advance (i.e. could be raster OR ve... - 08:31 PM Bug report #17560 (Closed): Attribute Table refresh issue: when there's only one row on attribute...
- When there is only one row shown on attribute table,
"Update All" / "Update Filtered" / "Update Selected" button cl... - 07:15 PM Feature request #17559: QGIS 3D view - WMTS layers slow to load
- Comments from Martin Dobias:
> I think I know why WMTS is slow in 3D view... the terrain tiles are processed in ... - 07:14 PM Feature request #17559 (Open): QGIS 3D view - WMTS layers slow to load
- I’m noticing that WMTS tiles take a lot longer to load in the 3D view than in the 2D map. In many cases refreshing th...
- 07:09 PM Bug report #17558 (Closed): QGIS 3D view does not interpret DEM no-data values
- I have a DEM layer with a no-data = -9999. When I load this in the QGIS 3D view it doesn’t seem to interpret the no d...
- 06:28 PM Feature request #17474: when opening qgis by clicking gpkg -> open with qgis use projectinfo if a...
- Giovanni Manghi wrote:
> Joana Simoes wrote:
> > I think it would make sense to merge efforts, and support the abil... - 05:41 PM Feature request #17557 (Open): Add up/down controls to Min/Max fields in the styling panel for ra...
- While most/all other such fields in the Layer Styling panel have up/down controls for their numeric input fields, the...
- 05:34 PM Bug report #17556 (Closed): Raster calculator expression editor should use monospace font
- The expression editor of the raster calculator does not use a fixed-width/monospace font. Other similar forms have be...
- 04:56 PM Bug report #17555 (Closed): Problem with GRASS in Processing plugin
- I just installed QGIS 2.99 master and GRASS7 using homebrew formula. Everything worked fine until I add path to GRASS...
- 04:37 PM Bug report #17554 (Closed): [layer properties] the Edit button should not open a "Add Vector Join...
- In Vector layer properties > Join tab, clicking the Edit button should not open a "Add Vector Join" dialog. It's conf...
- 04:11 PM Bug report #17553 (Feedback): [layer properties] Selected item in the Join tab is not highlighted
- In the layer properties dialog > Join tab, clicking a row does nothing. you first feel like nothing is selected but a...
- 01:24 PM Bug report #16183: Bookmark remove dialog German translation issue
- Pull request proposed at https://github.com/qgis/QGIS/pull/5730. Should be fixed in next 2.18 minor release.
If the ... - 01:24 PM Bug report #16183: Bookmark remove dialog German translation issue
- Pull request proposed at https://github.com/qgis/QGIS/pull/5730. Should be fixed in next 2.18 minor release.
If the ... - 01:06 PM Feature request #13054: ability to create virtual band for raster layers
- I want to voice my support of this feature request. Just had several intermediate files from playing with the raster ...
- 12:17 PM Bug report #17552 (Feedback): Main window in master does not fit on 1360 pixel width screen
- Is this an issue on 2.18.14?
- 08:39 AM Bug report #17552 (Closed): Main window in master does not fit on 1360 pixel width screen
- Related issue: #17233
My computer has two screens, but Qgis was started up on the screen that is 1360x768.
The ot... - 11:22 AM Bug report #17524: Windows: cannot save updates in csv file opened as OGR vector layer
- Cannot replicate here with the data you provided.
- 10:31 AM Bug report #17524: Windows: cannot save updates in csv file opened as OGR vector layer
- Unfortunately, the issue still exists in 2.18.14. When I change any attribute in the _ Attribute Table_ and click _Sa...
- 11:21 AM Bug report #17526 (Closed): Building virtual raster deforms whole raster in non native projection
- 10:26 AM Bug report #17526: Building virtual raster deforms whole raster in non native projection
- The issue is that in given area every time equal area projected grids will be slightly different after merging or vir...
- 11:20 AM Bug report #17551 (Open): (daily build cd0ba91) virtual layer queries seem to be broken
- 04:37 AM Bug report #17551: (daily build cd0ba91) virtual layer queries seem to be broken
- Giovanni Manghi wrote:
> Did you tagged as regression because the query (with the same data) works on 2.18.14?
Ye... - 10:45 AM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Thanks for your answer. How to make a clean environment? Is it enough deinstallation first and deleting C:\Users\me\....
- 09:44 AM Bug report #17231: Processing help system expects wrong link
- Alexander Bruy wrote:
> Just curious where you found french docs for master?
You know that it does not exist. I m... - 08:33 AM Bug report #17231: Processing help system expects wrong link
- Harrissou Santanna wrote:
> In the french locale, the last bits of the url are not translated.
Just curious where... - 08:40 AM Bug report #17523 (Closed): Raster calculator cannot handle huge raster files
- Duplicates #13336
- 08:40 AM Bug report #17523 (Closed): Raster calculator cannot handle huge raster files
- Duplicates #13336
- 08:38 AM Bug report #17443: PROCESSING: Mac OS Grass help path error
- And seems already fixed.
- 08:36 AM Bug report #17443 (Closed): PROCESSING: Mac OS Grass help path error
- 08:35 AM Bug report #17443: PROCESSING: Mac OS Grass help path error
- I don't see anything related to GRASS provider in the stacktrace. It is looks like completely different error.
- 07:28 AM Revision a95aecaf (qgis): Fix tests
- 05:00 AM Revision f04587eb (qgis): Update tests, add new test for complex layer name
- 03:48 AM Revision 718e4985 (qgis): Fix some inefficient QString replace calls
- 03:45 AM Revision 148380ab (qgis): Fix inefficient QString splitting
- QString::split with single characters is about 10x faster than
QString::split using QStrings - 03:23 AM Revision 144e9a2e (qgis): Fix handling of ogr sublayers with ':' in their name
- Unlikely to happen, but it does occur with some layers coming
from processing models. In any case we want QGIS to be ... - 03:11 AM Bug report #17544 (Closed): Package layers algorithm can't take the output of reprojection
- Applied in changeset commit:qgis|74514220697bba661591f1b7c3bd6012e302689d.
- 03:11 AM Bug report #17544 (Closed): Package layers algorithm can't take the output of reprojection
- Applied in changeset commit:qgis|74514220697bba661591f1b7c3bd6012e302689d.
- 03:01 AM Revision 74514220 (qgis): Fix package layers algorithm can't take the outputs from models
- Fixes #17544
2017-11-25
- 11:01 PM Bug report #17551 (Feedback): (daily build cd0ba91) virtual layer queries seem to be broken
- Did you tagged as regression because the query (with the same data) works on 2.18.14?
- 10:54 PM Bug report #17551 (Closed): (daily build cd0ba91) virtual layer queries seem to be broken
- I am trying to use the "virtual layers" feature in QGIS (daily build cd0ba91) to select a list of towns adjacent to a...
- 09:34 PM Revision 96857ebd (qgis): Fix crash when a geopackage layer is open in QGIS, and then is overwritten
- with another layer with different field definitions
- 09:00 PM Bug report #17546: Couldn't load plugin 'processing' due to an error when calling its classFactor...
- James Passmore wrote:
> James Passmore wrote:
>
> > On loading QGIS first I get a _Unable To Get Local Issuer Cer... - 08:58 PM Bug report #17546: Couldn't load plugin 'processing' due to an error when calling its classFactor...
- James Passmore wrote:
> On loading QGIS first I get a _Unable To Get Local Issuer Certificate_ error like: https:/... - 08:57 PM Bug report #17546 (Rejected): Couldn't load plugin 'processing' due to an error when calling its ...
- James Passmore wrote:
> Giovanni Manghi wrote:
> > Here same platform, platform version, QGIS repository (in additi... - 08:57 PM Bug report #17546 (Rejected): Couldn't load plugin 'processing' due to an error when calling its ...
- James Passmore wrote:
> Giovanni Manghi wrote:
> > Here same platform, platform version, QGIS repository (in additi... - 08:55 PM Bug report #17546: Couldn't load plugin 'processing' due to an error when calling its classFactor...
- Giovanni Manghi wrote:
> Here same platform, platform version, QGIS repository (in addition to the ubuntugis one) an... - 04:27 PM Bug report #17546 (Feedback): Couldn't load plugin 'processing' due to an error when calling its ...
- Here same platform, platform version, QGIS repository (in addition to the ubuntugis one) and cannot see this problems...
- 10:35 AM Bug report #17546 (Rejected): Couldn't load plugin 'processing' due to an error when calling its ...
- Installed qgis and qgis-python from http://qgis.org/ubuntugis-nightly.
On loading QGIS first I get a _Unable To ... - 08:57 PM Bug report #17549 (Closed): WARNING Cannot open /usr/share/qgis/resources/data/world_map.shp.()
- James Passmore wrote:
> Giovanni Manghi wrote:
> > Here same platform, platform version, QGIS repository (in additi... - 08:57 PM Bug report #17549 (Closed): WARNING Cannot open /usr/share/qgis/resources/data/world_map.shp.()
- James Passmore wrote:
> Giovanni Manghi wrote:
> > Here same platform, platform version, QGIS repository (in additi... - 08:55 PM Bug report #17549: WARNING Cannot open /usr/share/qgis/resources/data/world_map.shp.()
- Giovanni Manghi wrote:
> Here same platform, platform version, QGIS repository (in addition to the Ubuntugis one) an... - 04:23 PM Bug report #17549 (Feedback): WARNING Cannot open /usr/share/qgis/resources/data/world_map.shp.()
- Here same platform, platform version, QGIS repository (in addition to the Ubuntugis one) and cannot see those log mes...
- 12:00 PM Bug report #17549 (Closed): WARNING Cannot open /usr/share/qgis/resources/data/world_map.shp.()
- Installed qgis and qgis-python from http://qgis.org/ubuntugis-nightly.
Loading WMS, WFS, WCS layers...
In the O... - 08:52 PM Feature request #17548: Automatically populate layer metadata for WMS layers
- Giovanni Manghi wrote:
> Hi,
>
> how this differ from #17547 ? Thanks!
The dialogue for the Layers panel provi... - 04:01 PM Feature request #17548 (Feedback): Automatically populate layer metadata for WMS layers
- Hi,
how this differ from #17547 ? Thanks! - 11:10 AM Feature request #17548 (Feedback): Automatically populate layer metadata for WMS layers
- When right clicking on a WMS layer in the Layers Panel and selecting properties No information or metadata is provide...
- 03:35 PM Bug report #17526: Building virtual raster deforms whole raster in non native projection
- Pawel Stankiewicz wrote:
> Sorry for the waste of time. Choosing the highest resolution makes virtual raster near id... - 03:34 PM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Pawel Stankiewicz wrote:
> Any ideas what should I check?
update to latest master revision code. Try on a clean e... - 03:33 PM Bug report #17485: Rendering no longer updated after few saved edits
- Cannot replicate the issue. Please try on a clean environment/installation. Thanks!
- 02:28 PM Bug report #17550 (Closed): Opacity slider in the Layers Panel partially broken for WMS and XYZ l...
- The opacity slider for a WMS or XYZ layer it not showed in the legend immediately after added. You need to dag the la...
- 02:19 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- i could have sworn that i got a wrong link with fr_FR but i might have dreamed it: only en_US locale seems to be not ...
- 01:40 PM Bug report #17475 (Closed): QGIS 2.99 Shortest Path not showing shortest route
- Hi,
Your data misses some vertices, so the lines are not connected (please note two lines are only connected if th... - 01:40 PM Bug report #17475 (Closed): QGIS 2.99 Shortest Path not showing shortest route
- Hi,
Your data misses some vertices, so the lines are not connected (please note two lines are only connected if th... - 01:40 PM Bug report #17475 (Closed): QGIS 2.99 Shortest Path not showing shortest route
- Hi,
Your data misses some vertices, so the lines are not connected (please note two lines are only connected if th... - 12:43 PM Revision 5c22e313 (qgis): Follow up 248bc5db032cf
- 11:00 AM Bug report #17547 (Closed): WMS properties are not detected
- When right-clicking on a WMS layer in the Browser panel and selecting _Properties_ the Layer Properties window opens ...
- 10:54 AM Revision 3d6aa9c9 (qgis): fix en_US locale handling in QgsHelp
2017-11-24
- 10:24 PM Bug report #17526: Building virtual raster deforms whole raster in non native projection
- Sorry for the waste of time. Choosing the highest resolution makes virtual raster near identical to source in one pla...
- 09:39 PM Bug report #17526: Building virtual raster deforms whole raster in non native projection
- I wrote about the difference between Toolbox and Raster menu, because in the Toolbox the option ,,Resolution" was swi...
- 06:03 PM Bug report #17526 (Feedback): Building virtual raster deforms whole raster in non native projection
- I can't see absolutely any difference from the result obtained using the tool in Processing and in the "raster" menu:...
- 07:55 PM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Any ideas what should I check?
- 07:34 PM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Pawel Stankiewicz wrote:
> Preparing files and testing I've found decimal places are added when results are in a tem... - 07:04 PM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Preparing files and testing I've found decimal places are added when results are in a temporary layer no matter wheth...
- 01:49 PM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Pawel Stankiewicz wrote:
> Should I attach a file or record action on a screen?
yes, or alternatively add the lis... - 09:15 AM Bug report #17541: Processing Toolbox ads decimal places in attributes, all fields have the same ...
- Should I attach a file or record action on a screen? Any .shp with different numbers of decimal places in attributes ...
- 07:39 PM Bug report #12671: Cursor icon is too small on HiDPI screen
- I have a working prototype and I can fix the C++ side for cursor icons that are
- scalable
- SVG-based
- themable... - 06:28 PM Bug report #16183 (Open): Bookmark remove dialog German translation issue
- Yes it still appears like I described at my bug report. Today tested with QGIS 2.18.14 (QGIS-Codeversion: ff83b9a)
- 06:22 PM Bug report #17186: DB Manager and QGIS/Processing import in PostGIS tools are not adding "nextval...
- Alessandro Pasotti wrote:
> I cannot reproduce in master nor in 2.18.14 (tested from DB manager)
yeah, it seems f... - 06:05 PM Feature request #17474: when opening qgis by clicking gpkg -> open with qgis use projectinfo if a...
- Joana Simoes wrote:
> I think it would make sense to merge efforts, and support the ability of reading/writing compl... - 05:05 PM Bug report #17231: Processing help system expects wrong link
- Alexander Bruy wrote:
> No. For example, URL you mentioned with Ukrainian locale will look like http://docs.qgis.org... - 04:28 PM Bug report #17231: Processing help system expects wrong link
- Harrissou Santanna wrote:
> Let's take the database group (http://docs.qgis.org/testing/en/docs/user_manual/processi... - 01:23 PM Bug report #17231: Processing help system expects wrong link
- Currently, few algorithms have been rewritten so it's normal that you find errors. Only these groups are done https:/...
- 04:53 PM Feature request #17545 (Open): Single Axis Zoom
- Hello,
this is a feature request for a single axis zoom.
We are using QGIS to display non geographical inform... - 04:49 PM Bug report #17488: Processing Modeler: Defective GUI
- Andreas Schmid wrote:
> Not reproducible on Ubuntu 17.10 with self-compiled Version cd0ba91.
>
> Reproducible on ... - 04:46 PM Bug report #17488 (Open): Processing Modeler: Defective GUI
- Not reproducible on Ubuntu 17.10 with self-compiled Version cd0ba91.
Reproducible on a clean Ubuntu 17.10 when usi... - 04:43 PM Bug report #17523 (Feedback): Raster calculator cannot handle huge raster files
- I'm running your script to create the raster to test this issue... the asc file is at 105GB and has not yet finished....
- 10:09 AM Bug report #17523: Raster calculator cannot handle huge raster files
- too slow for my machine sorry, I cannot wait 20 minutes to load the raster and another 20 if I scroll the mouse wheel...
- 04:41 PM Bug report #17534 (Open): QGIS Master crashes after open a project
- 03:13 PM Bug report #17534: QGIS Master crashes after open a project
- Hi,
I created the following link
https://www.dropbox.com/s/ysuwguvp4xjltk8/Nuova%20cartella%20%282%29.7z?dl=0
all ... - 01:51 PM Bug report #17534 (Feedback): QGIS Master crashes after open a project
- Any chance you can add a link to allow us download your project and data?
- 01:51 PM Bug report #17534 (Feedback): QGIS Master crashes after open a project
- Any chance you can add a link to allow us download your project and data?
- 01:51 PM Bug report #17534 (Feedback): QGIS Master crashes after open a project
- Any chance you can add a link to allow us download your project and data?
- 08:44 AM Bug report #17534: QGIS Master crashes after open a project
- actually there are are 7 crash reports (for the same single crash...) :(
- 08:44 AM Bug report #17534: QGIS Master crashes after open a project
- actually there are are 7 crash reports (for the same single crash...) :(
- 08:44 AM Bug report #17534: QGIS Master crashes after open a project
- actually there are are 7 crash reports (for the same single crash...) :(
- 08:44 AM Bug report #17534: QGIS Master crashes after open a project
- actually there are are 7 crash reports (for the same single crash...) :(
- 08:44 AM Bug report #17534: QGIS Master crashes after open a project
- actually there are are 7 crash reports (for the same single crash...) :(
- 08:37 AM Bug report #17534: QGIS Master crashes after open a project
- and this is the second crash report (2nd dialog of crash reports appear for the same crash)
- 08:34 AM Bug report #17534: QGIS Master crashes after open a project
- I've installed qgis-dev-pdb then I replied the sequence described above and now I attach the new crash report
- 04:16 PM Revision 72553a60 (qgis): Merge pull request #5710 from elpaso/api-code-cleaning-int-2-enums
- QgsVectorLayer code cleaning use enums instead of int
- 04:09 PM Revision abe1a9b6 (qgis): Expression context creation for processing improvements
- Hiding away the implementation directly in QgsProcessingFeatureSource
See discussion https://github.com/qgis/QGIS/pu... - 04:09 PM Revision 916c9c4c (qgis): Open heart surgery on expression context for processing sources
- 04:09 PM Revision fd127ee6 (qgis): Fix file mode
- 04:09 PM Revision aaf70de7 (qgis): Add test for QgsExpressionContextScope::takeScopes
- 04:07 PM Bug report #17544 (Closed): Package layers algorithm can't take the output of reprojection
- In a Processing model, the package layer algorithm can't take the output of the vector reprojection algorithm.
On my... - 04:03 PM Revision cf685f0f (qgis): add missing import operator (#5724)
- 03:18 PM Bug report #17443 (Reopened): PROCESSING: Mac OS Grass help path error
- Different error but still related to GRASS detection:...
- 02:54 PM Feature request #17543 (Open): Add an icon to 3D Map view and show it on toolbar
- In the View menu, it's one of the few tools that do not have icons. Also he's missing on the Map Navigation toolbar.
- 02:45 PM Bug report #17485: Rendering no longer updated after few saved edits
> I have used the same project in 2.18, but didn't see QGis stop updating/rendering back then.
ok, if possible s...- 02:26 PM Bug report #17509 (Open): @geometry_point_count always equal to 1
- 02:10 PM Bug report #17524 (Feedback): Windows: cannot save updates in csv file opened as OGR vector layer
- Please update to 2.18.14 (the new LTR release) and try again. Thanks!
- 02:01 PM Bug report #17315 (Feedback): 3D Viewer: QGIS Crash when activating 3D Map view and 3D renderer
- 01:59 PM Bug report #17542: NULL values in a character varying postgis columns are shown as if they were b...
- no
- 01:50 PM Bug report #17542: NULL values in a character varying postgis columns are shown as if they were b...
- Regression?
- 09:05 AM Bug report #17542 (Feedback): NULL values in a character varying postgis columns are shown as if ...
- It is not possible to tell the difference while editing.
- 01:55 PM Bug report #17301 (Feedback): 3d view doesn't work with global basemaps
- The patch is merged, can we close this? Cheers!
- 01:51 PM Bug report #17416 (Open): Crash on enabling 3D renderer for point layer
- 01:43 PM Bug report #16426 (Feedback): Rule-based renderers do not seem to implement symbolLayers() and ca...
- 11:00 AM Bug report #16426: Rule-based renderers do not seem to implement symbolLayers() and causes crash
- Okay. Will try as soon as QGIS3 is published and I have it installed. Need to migrate first.
- 10:25 AM Bug report #16426: Rule-based renderers do not seem to implement symbolLayers() and causes crash
- Cannot reproduce in master
- 01:41 PM Revision 58f55969 (qgis): Add changed return values to api break
- 12:12 PM Revision 14531964 (qgis): Merge pull request #5719 from nyalldawson/translate_z
- geometries: translate Z/M
- 12:04 PM Revision 97f749e6 (qgis): [processing] fix error when adding refactor fields alg in empty model
- (fixes #17421)
- 12:04 PM Bug report #17421 (Closed): processing: adding refactor fields alg into a model throws an error
- Applied in changeset commit:qgis|97f749e6b41338da0e1ee508e2634f5760be966c.
- 12:04 PM Bug report #17421 (Closed): processing: adding refactor fields alg into a model throws an error
- Applied in changeset commit:qgis|97f749e6b41338da0e1ee508e2634f5760be966c.
- 06:35 AM Bug report #17421 (Open): processing: adding refactor fields alg into a model throws an error
- Sorry, I should have mentioned that the error occurs when the algorithm is added in an empty modeler (i.e. no feature...
- 06:35 AM Bug report #17421 (Open): processing: adding refactor fields alg into a model throws an error
- Sorry, I should have mentioned that the error occurs when the algorithm is added in an empty modeler (i.e. no feature...
- 11:58 AM Revision c2b3ac56 (qgis): [processing] order 3rd party provider groups (#5723)
- 11:53 AM Revision 7a63a07f (qgis): Add return cases to the docs and fully qualified enums
- 11:16 AM Revision a477ea3a (qgis): [processing] move grass & saga version number to tooltips
- 10:58 AM Revision 49b23127 (qgis): [BUGFIX][Spatialite] Setting default value in loadFields with the right...
- Because Geomtry field is not added to fields list, the index do not respect the index in the table. It's necessary to...
- 10:18 AM Bug report #17458: QGIS freezes when naming a style rule
- works for me
- 09:51 AM Bug report #17520: Point Cluster Rendering
- Giovanni Manghi wrote:
> Jean-Louis Stanus wrote:
> > Ok, but i don't understand why it's in QGIS 2.18.14 desktop i... - 09:44 AM Feature request #15733: improve qml API to allow filtering different layer definition sections
- After some brainstorming with Matthias and QWAT's folk, this would help a lot to easily customize and get projects in...
- 09:28 AM Bug report #17538: MYSQL Connection with wrong tables
- It would be useful if you could confirm this bug on master. IIRC there were some recent changes in the way sublayers ...
- 09:20 AM Bug report #17538: MYSQL Connection with wrong tables
- Sorry, i don't know the release, but I update periodically. So it was changed between Feb. 2016 and March 2017.
- 09:25 AM Revision cdca0dd1 (qgis): Merge pull request #5720 from elpaso/bugfix-17442-null-categories
- [bugfix] Categorized style issue using numeric fields with NULL values
- 09:24 AM Bug report #17442 (Closed): Categorized style issue using numeric fields with NULL values
- Applied in changeset commit:qgis|29abd9d3f990a42c0f7e5a46c88e228fd032082b.
- 09:24 AM Bug report #17442 (Closed): Categorized style issue using numeric fields with NULL values
- Applied in changeset commit:qgis|29abd9d3f990a42c0f7e5a46c88e228fd032082b.
- 09:07 AM Bug report #17442 (In Progress): Categorized style issue using numeric fields with NULL values
- PR: https://github.com/qgis/QGIS/pull/5720
Backport will follow ... - 09:07 AM Bug report #17442 (In Progress): Categorized style issue using numeric fields with NULL values
- PR: https://github.com/qgis/QGIS/pull/5720
Backport will follow ... - 08:57 AM Bug report #17535: Postgresql: empty SAVEPOINTS
- Hugo, can you try checking the error msg from mTransaction->begin in QgsTransactionGroup::onEditingStarted() ?
Als... - 07:36 AM Bug report #17535: Postgresql: empty SAVEPOINTS
- Hugo, is there by any chance a redo command issued (or an edit command) ? Can you describe, at least rougthly what yo...
- 08:54 AM Revision 29abd9d3 (qgis): [bugfix] Categorized style issue using numeric fields with NULL values
- Fixes #17442
- 07:51 AM Revision 8b15c73d (qgis): Merge pull request #5680 from DelazJ/hidefields
- [Save As] Set fields export options visible only when compatible
- 07:26 AM Revision b786ed03 (qgis): Add a unit test
- 07:25 AM Revision cc29f0ee (qgis): Fix some doxygen warnings
- 07:18 AM Revision 6b4b9fe9 (qgis): Fix closest vertex z/m doesn't show in identify tool for multiline
- geometries, remove duplicate closest M value attribute
- 07:18 AM Revision ff900c0b (qgis): [processing] Make translate algorithm native
- And add option to translate z/m values
- 07:16 AM Revision 3268b778 (qgis): Sipify
- 07:15 AM Revision 4f08a35c (qgis): Update test masks
- 07:11 AM Revision 86669b93 (qgis): Fix z order stacking of guides
- 06:34 AM Revision dd223d9b (qgis): Allow transform methods in QgsAbstractGeometry/QgsGeometry to also
- transform z/m values via scale/translate arguments
- 06:22 AM Revision 1fcadb72 (qgis): [processing] fix for import into spatialite and execute sql algorithms
- 05:58 AM Revision 03ec2d8a (qgis): Merge pull request #5702 from nyalldawson/dxf_improve
- [dxf] Add option to export labels as text elements, instead of mtext
- 05:57 AM Revision 32834e9b (qgis): Update indentation
- 05:36 AM Revision 6ec96d6d (qgis): [layouts][FEATURE] Port arrow functionality to polyline item
- Instead of a separate (badly behaved) item type for arrows, instead
add the arrowhead options to the much nicer polyl... - 02:29 AM Revision e541a380 (qgis): fix build
- 02:05 AM Revision f76ed223 (qgis): Port ui for attribute table
- 01:54 AM Revision 2b5aca55 (qgis): Merge pull request #5689 from nyalldawson/gpkg_alg
- [processing] Fixes to non flat-file exports
- 01:24 AM Revision 5b1c6901 (qgis): Port more scalebar functionality
- 01:24 AM Revision b7ef3d3c (qgis): Simplify some code, cleanup UI
- 01:24 AM Revision af59c535 (qgis): [layouts] Add more unit choices to scalebars
- Explicitly add options for kilometers, miles, etc as the current
UX for setting these is too confusing!
Fixes #16921 - 01:24 AM Revision cca7c74d (qgis): Start hooking up tables to app
- 01:24 AM Revision 93403647 (qgis): Update sip
- 01:24 AM Revision c6eaf1f7 (qgis): Update test masks
- 01:24 AM Revision f29eb7b1 (qgis): Port and fix unit tests
- 01:24 AM Revision f90c5003 (qgis): Port table subclasses
- 01:24 AM Revision f04d4385 (qgis): Some undo/redo fixes for multiframe items
- 01:24 AM Revision 3c4fae00 (qgis): Readd tests for scalebars
- 01:24 AM Revision e71d4d7c (qgis): more attempts to fix multiframe undo
- 01:24 AM Revision 2c85182c (qgis): [layouts] Link new scalebars to selected map item, if there is one
- Fixes #13851
- 01:24 AM Revision 8f5e0cb1 (qgis): Begin porting scalebar item
- 01:24 AM Revision 3a0f9438 (qgis): Port text table
- 01:24 AM Revision 12e69ab1 (qgis): Modernize code
- 01:24 AM Revision 7e7770b6 (qgis): Fix incorrect render context scaling for scale bar rendering
- 01:24 AM Revision 2a75ad8e (qgis): More work on layout multiframe undo/redo
- 01:24 AM Revision 9cf6e0a2 (qgis): Start porting table items
- 01:24 AM Revision a615a48b (qgis): Make scalebars auto selected between m/km and ft/miles when newly added
- Based on current linked map scale and linked map CRS
- 01:24 AM Revision 604e51d3 (qgis): Restore some tests
- 01:24 AM Revision 63f14bd9 (qgis): Also link new legends to selected map item
- 01:24 AM Revision 3decab98 (qgis): Fix map item tooltips
- 01:24 AM Revision 060270c0 (qgis): [layouts] Simplify scalebar unit handling
- Instead of auto setting the units to meters/feet, and then using
the label multiplier setting to obtain a scalebar in... - 01:24 AM Revision 30ce60bd (qgis): Remove some processEvents usage
- 01:24 AM Revision 83ee6498 (qgis): Add ui for configuring html items
- 01:24 AM Revision 584cbd07 (qgis): Fix test failure
- 01:24 AM Revision 714920ff (qgis): Start of multiframe porting
- 01:24 AM Revision c4c0c83c (qgis): Restore api for handling layout item page numbers
- 01:24 AM Revision ee45ec97 (qgis): Add page number selection to new item dialog
- 01:24 AM Revision 0e71505f (qgis): Fix a number of multiframe methods
- 01:24 AM Revision dddce25e (qgis): More work on porting multiframe items
- 01:24 AM Revision f1d1e454 (qgis): Begin port of HTML item
- 01:24 AM Revision aec03269 (qgis): Sip is p****** me off, by refusing to build for unrelated reasons
- Block a bunch of classes from Python bindings for now until sip
gets over itself - 01:24 AM Revision 2cf99116 (qgis): Resurrect tests for html item
- 01:03 AM Revision 62782459 (qgis): Merge pull request #5713 from lejedi76/fix_remove_fromOldWkbType
- [db_manager] remove fromOldWkbType (api_break) from vlayer
2017-11-23
- 12:35 AM Revision 5b66ea76 (qgis): Rename some static variables to use 's' prefix
- To match QGIS code conventions
- 12:32 AM Revision e0bdd26e (qgis): [OGR provider] When creating a new layer with createEmptyLayer(), make ...
- 12:31 AM Revision c04b91f4 (qgis): Fix some memory leaks
- 12:31 AM Revision f7a317be (qgis): [processing] Fix saving outputs to non-file formats
- 12:31 AM Revision 59d55fc4 (qgis): [processing] Ensure correct sublayer is loaded when saving output
- to destination with multiple sublayers
- 12:31 AM Revision 11784280 (qgis): Fix running processing tests multiple times
- 12:31 AM Revision 0a092cc3 (qgis): [processing] Throw an exception when sinks cannot be created
- Gives users debugging information messages on why the layers could
not be created
Also allow overwriting existing la... - 12:31 AM Revision aca22663 (qgis): [processing] Change save as spatialite option to save as GeoPackage
- Since it's much more useful. Also add a prompt for layer name, so that
you can save the results of an algorithm into ... - 12:31 AM Revision abcdd485 (qgis): [ogr] Fix cannot create layers for geopackage datasets when
- the database does not yet exist
- 12:31 AM Revision e3198c05 (qgis): Fix ui build warnings
- 12:31 AM Revision 8775aff7 (qgis): Fix error in Geometry by Expression
- We can't depend on preparing the expression, as we may not have
enough context to do this during the algorithm prepar... - 12:21 AM Revision 13cb8e4e (qgis): remove fromOldWkbType (api_break)
- 11:11 PM Bug report #17541 (Feedback): Processing Toolbox ads decimal places in attributes, all fields hav...
- Need a lot more detail here - it's certainly not reproducable here.
- 10:00 PM Bug report #17541 (Closed): Processing Toolbox ads decimal places in attributes, all fields have ...
- Provider independent (SAGA and QGIS).
- 09:40 PM Bug report #17416: Crash on enabling 3D renderer for point layer
- Back on the notebook: Configuring a DEM for 3D view works without crashes, but any vector layer with 3D enabled does ...
- 07:57 PM Bug report #17416: Crash on enabling 3D renderer for point layer
- There are no crashes on my desktop PC with NVIDIA GeForce GTX 670.
- 07:00 PM Bug report #17416 (Feedback): Crash on enabling 3D renderer for point layer
- 01:55 PM Bug report #17416: Crash on enabling 3D renderer for point layer
- With "basic 3D map view" I meant just to be able to open the 3D map view, do some zooming/panning around, configure t...
- 08:09 PM Bug report #17540 (Closed): 3D View settings are not copied by "Copy Style"
- 3D View settings are not copied by using copy and paste style.
- 07:31 PM Bug report #17487 (Open): rotate labels tool does not work properly when canvas is rotated
- 07:05 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Seems this happens only with languages which have different variations, like en_US and en_GB, pt_PT and pt_BR. As I c...
- 01:45 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- > Hmm, which OS are you using?
Windows 10 - 01:23 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Harrissou Santanna wrote:
> 1/ when I do not override the system locale option, the language is retrieved as fr_FR a... - 11:06 AM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- OK. "Balle à terre". There seems to be a lot of misunderstanding in both parts.
I'll repeat myself: *There's no prob... - 08:33 AM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Harrissou Santanna wrote:
> I'm not sure I said anything else, did I? I neither see anything wrong with the URL; you... - 06:51 PM Bug report #17231: Processing help system expects wrong link
- Harrissou Santanna wrote:
> - the Processing doc structure currently follows how algs are grouped in QGIS so i fail ... - 06:49 PM Bug report #17529 (Closed): QGIS 3D view - Flickering and blank white screen with rotating and ti...
- Reopen if/when necessary.
- 06:49 PM Bug report #17529 (Closed): QGIS 3D view - Flickering and blank white screen with rotating and ti...
- Reopen if/when necessary.
- 09:54 AM Bug report #17529: QGIS 3D view - Flickering and blank white screen with rotating and titling vie...
- > The gaps between tiles can be hidden by increasing the "skirt height" option in terrain configuration... the skirts...
- 09:41 AM Bug report #17529: QGIS 3D view - Flickering and blank white screen with rotating and titling vie...
- The gaps between tiles can be hidden by increasing the "skirt height" option in terrain configuration... the skirts a...
- 06:55 AM Bug report #17529: QGIS 3D view - Flickering and blank white screen with rotating and titling vie...
- Layers used in this test were:
1. WMTS layer (https://tiles.maps.linz.io/nz_aerialimagery_basemap/WMTSCapabilities... - 06:49 AM Bug report #17529 (Closed): QGIS 3D view - Flickering and blank white screen with rotating and ti...
- See video showing issues on MacOSX running b288a5f: https://youtu.be/OwTXqmJJ5IY
Note the white gaps in the 3D ter... - 06:17 PM Bug report #17510: qgis crashed on closing
- Nathan Woodrow wrote:
> qgis2 folder isn't used anymore remember. It's in the profiles folder now.
sorry, habits... - 06:13 PM Bug report #17538 (Feedback): MYSQL Connection with wrong tables
- Do you know what was the last release were it worked as expected?
- 06:13 PM Bug report #17538 (Feedback): MYSQL Connection with wrong tables
- Do you know what was the last release were it worked as expected?
- 06:13 PM Bug report #17538 (Feedback): MYSQL Connection with wrong tables
- Do you know what was the last release were it worked as expected?
- 06:13 PM Bug report #17538 (Feedback): MYSQL Connection with wrong tables
- Do you know what was the last release were it worked as expected?
- 12:51 PM Bug report #17538 (Closed): MYSQL Connection with wrong tables
- In former times MYSQL Connection from a table as saved in the QGS File as:
<datasource>MySQL:OrkanDB,host=Se... - 06:10 PM Bug report #17493: QGIS 3D uses a lot of CPU even when idle
- I am not sure, we should probably first do more debugging to rule out the possibility it is QGIS 3D problem before we...
- 06:01 PM Bug report #17493: QGIS 3D uses a lot of CPU even when idle
- Is there a QT ticket to tracking this problem?
- 01:58 PM Bug report #17493: QGIS 3D uses a lot of CPU even when idle
- I have tested here with Qt 5.9.0 on linux and unfortunately it did not really help, QGIS still used a lot of CPU (may...
- 06:04 PM Bug report #17514 (Open): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- 06:00 PM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- Steps to reproduce:
1. Open QGIS and create blank project
2. Open layer: https://tiles.maps.linz.io/nz_aerialimag... - 04:29 PM Bug report #17514 (Feedback): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go...
- 04:05 PM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- Could you please describe how do you get the issue? And what is your project CRS? Does the DEM layer need to get invo...
- 06:47 AM Bug report #17514 (Reopened): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go...
- I've re-opened this. I've noticed this issue still occurs if the WMTS layer and the Raster DEM as in different coordi...
- 06:16 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- Thanks Martin!
- 06:03 PM Bug report #17520: Point Cluster Rendering
- Jean-Louis Stanus wrote:
> Ok, but i don't understand why it's in QGIS 2.18.14 desktop in the osgeo4w packages.
>
... - 05:59 PM Bug report #17520: Point Cluster Rendering
- Ok, but i don't understand why it's in QGIS 2.18.14 desktop in the osgeo4w packages.
It should not be there. - 05:01 PM Revision e4216ae0 (qgis): started datum UI refactoring
- 03:24 PM Revision 851adb0a (qgis): Allow adding sources to processing expression context
- 03:24 PM Revision cd0ba918 (qgis): Use layer context in RefactorFields algorithm
- Fix #17533
- 03:24 PM Bug report #17533 (Closed): Some expressions don't work with refactor fields algorithm
- Applied in changeset commit:qgis|cd0ba918ba6508b57b6ef78dc20fcd465d28d4da.
- 03:24 PM Bug report #17533 (Closed): Some expressions don't work with refactor fields algorithm
- Applied in changeset commit:qgis|cd0ba918ba6508b57b6ef78dc20fcd465d28d4da.
- 09:45 AM Bug report #17533 (Closed): Some expressions don't work with refactor fields algorithm
- Some expresssions can't be used in the refactor fields algorithm. The preview in the expression editor works fine, bu...
- 03:16 PM Bug report #17483 (Closed): In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has ...
- Applied in changeset commit:qgis|3a576d80b230779150ea560eb5c1b148633888f2.
- 03:16 PM Bug report #17483 (Closed): In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has ...
- Applied in changeset commit:qgis|3a576d80b230779150ea560eb5c1b148633888f2.
- 03:16 PM Bug report #17443 (Closed): PROCESSING: Mac OS Grass help path error
- Applied in changeset commit:qgis|03e4756d268a6a913f3372f420643476ebb1da37.
- 03:16 PM Bug report #17443 (Closed): PROCESSING: Mac OS Grass help path error
- Applied in changeset commit:qgis|03e4756d268a6a913f3372f420643476ebb1da37.
- 03:16 PM Revision 6063c83e (qgis): [processing] detect GRASS 7.4 on Mac
- 03:16 PM Revision 03e4756d (qgis): [processing] don't throw error if GRASS not found on Mac (fix #17443)
- 03:16 PM Revision 3a576d80 (qgis): [processing] restore Help button functionality in modeler (fix #17483)
- 03:09 PM Bug report #17488 (Feedback): Processing Modeler: Defective GUI
- Not reproducible on Linux (17ad093, self-compiled) and Windows 7 (installed via OSGeo4W, qgis-dev-2.99.0-224 from Nov...
- 03:01 PM Bug report #17170: Refactor fields processing algorithm missing expression context when edited in...
- https://github.com/qgis/QGIS-Enhancement-Proposals/issues/89#issuecomment-344550043
- 02:50 PM Bug report #17539: I can only create one spatial Bookmark in current master
- > I confirm: I neither can check it.
Oups, sorry. I realized that no project was open in the QGIS instance I was try... - 02:44 PM Bug report #17539: I can only create one spatial Bookmark in current master
- I confirm: I neither can check it. Last week, it was possible to check that box but it resulted in #17472 (on Windows...
- 02:07 PM Bug report #17539: I can only create one spatial Bookmark in current master
- Some extra testing:
- I can remove the one issue, and then create a new one.
- there is a checkbox 'In Project' w... - 01:49 PM Bug report #17539 (Closed): I can only create one spatial Bookmark in current master
- Creating a new project, and for example add some wms layers like:
qgis.utils.iface.addRasterLayer(
"tileMatrixSet... - 02:38 PM Bug report #16183 (Feedback): Bookmark remove dialog German translation issue
- Is this still the case?
- 02:38 PM Bug report #16183 (Feedback): Bookmark remove dialog German translation issue
- Is this still the case?
- 02:15 PM Bug report #17442: Categorized style issue using numeric fields with NULL values
- sorry, ignore my previous comment, the manual creation of the layer is probably required to reproduce the issue.
- 02:08 PM Bug report #17442: Categorized style issue using numeric fields with NULL values
- looking ... if you want to make life easier for developers, please always attach a minimal project and sample file to...
- 02:09 PM Revision a2ff3631 (qgis): Fix tessellation of polygons that are not horizontal
- Discovered by Nyall while working on PR #5708
Tessellation would shift coordinates because when points got reproject... - 02:06 PM Bug report #17523: Raster calculator cannot handle huge raster files
- looking ...
- 02:04 PM Revision 09cffcd0 (qgis): Avoid recursion in ValueRelation widget
- Fix #17521
- 01:59 PM Feature request #17536: Add XYZ Tiles missing from Add Layer dialogue and Data Source Manager.
- This is not a bug, it is just not implemented :-)
You could move this to a 'FEATURE REQUEST', but I'm not sure if ... - 11:25 AM Feature request #17536 (Closed): Add XYZ Tiles missing from Add Layer dialogue and Data Source Ma...
- The Add XYZ Tile layer/service only shows in the Browser panel, not in the Add Layer dialogue or the new Data Source ...
- 01:58 PM Revision 4f82adf2 (qgis): Update tests
- 01:50 PM Bug report #17528 (Closed): QGIS 3D view - Where window is docked tilting doesn't work
- 06:29 AM Bug report #17528: QGIS 3D view - Where window is docked tilting doesn't work
- OK my ability to search in this issue tracker is not good. This is duplicate of #17337
- 06:19 AM Bug report #17528 (Closed): QGIS 3D view - Where window is docked tilting doesn't work
- On MacOSX when the QGIS 3D view is docked with the main QGIS application window the "SHIFT" key modifier doesn't allo...
- 01:42 PM Bug report #16802 (Closed): Master crashes with 2 WMTS layers and scrollwheel use
- Yep, tested here again. Cannot reproduce anymore. Apparently one of earlier commits fixed this.
QGIS master is get... - 01:39 PM Bug report #17421: processing: adding refactor fields alg into a model throws an error
- @Matthieu - I just tested with a recent master and it seems to work ok. I have other issues with expression context -...
- 01:24 PM Bug report #17525: subform in automatic generated relation referende widget is not visible in 2.9...
- Hallo Andreas,
i had seen and tested this.
When you click and the triangle turned down, it seems that the roundin... - 08:41 AM Bug report #17525: subform in automatic generated relation referende widget is not visible in 2.9...
- Hi Gerhard,
I noticed that in the 2.99 screenshot there is a small triangle indicating that some closed section of... - 01:20 PM Bug report #17508 (Closed): SaveAs Geopackage: TEXT fields are converted to TEXT(255)
- Ok, let's close it then, as it is working for QGIS, and apparently not a QGIS problem.
- 12:50 PM Bug report #17537 (Closed): MYSQL Connection with wrong tables
- In former times MYSQL Connection from a table as saved in the QGS File as:
<datasource>MySQL:OrkanDB,host=Se... - 12:48 PM Feature request #17474: when opening qgis by clicking gpkg -> open with qgis use projectinfo if a...
- I think it would make sense to merge efforts, and support the ability of reading/writing complete project from/to a g...
- 12:40 PM Feature request #17522: when opening a layer from geopackage use the sld format if qml format is ...
- +1
- 12:09 PM Bug report #17535: Postgresql: empty SAVEPOINTS
> might be the begin transaction command is sent in a context where it's not expected
I don't get it. How can ...- 11:53 AM Bug report #17535: Postgresql: empty SAVEPOINTS
- I noticed the same in some tests.
Probably the transaction is not started, might be the begin transaction command ... - 11:01 AM Bug report #17535 (Closed): Postgresql: empty SAVEPOINTS
- When using layers from a PostgreSQL in transaction mode, some strange things happen sometimes.
In particular, an e... - 12:09 PM Revision def85fa2 (qgis): QgsVectorLayer code cleaning use enums instead of int
- It was one of the TODOs for QGIS 3
- 11:47 AM Revision d1cf7e61 (qgis): Merge pull request #5707 from elpaso/bugfix-17262-lineedit-x-button
- [ui][bugfix] lineedit add margin for X icon
- 11:46 AM Bug report #17262 (Closed): Attribute table data entered text is obscured by the 'x' button
- Applied in changeset commit:qgis|a7ffde6c95207f52f8fed94e0c356bfda862491d.
- 11:46 AM Bug report #17262 (Closed): Attribute table data entered text is obscured by the 'x' button
- Applied in changeset commit:qgis|a7ffde6c95207f52f8fed94e0c356bfda862491d.
- 10:00 AM Bug report #17262 (In Progress): Attribute table data entered text is obscured by the 'x' button
- PR: https://github.com/qgis/QGIS/pull/5707
Backporting will follow. - 09:18 AM Bug report #17262: Attribute table data entered text is obscured by the 'x' button
- This also affects master
- 11:40 AM Revision 5206bf0f (qgis): [3d] Fix creation of extruded walls in vertex binding mode
- Previously the walls always had horizontal top/bottom, but
in vertex binding mode the walls need to have different z ... - 11:39 AM Revision 134065da (qgis): [node editor] fix crash when editor is open and feature deleted
- 10:44 AM Bug report #12699 (Closed): Plugin Manager : Installed plugins list is not sorted
- Me neither. Closing.
- 10:35 AM Bug report #12699: Plugin Manager : Installed plugins list is not sorted
- Is it still valid? I was never able to reproduce it...
- 10:29 AM Revision cfbb5d72 (qgis): [ArcGIS REST] backport for crasher and mutex
- 10:22 AM Bug report #17534 (Closed): QGIS Master crashes after open a project
- Hi,
I open a project containing only 4 (polyline) layers of total size of about 5gb,
well:
- I wait a bit for tot... - 10:19 AM Bug report #15627 (Closed): Icons not displayed in QGIS plugin manager for python plugins
- Applied in changeset commit:qgis|248bc5db032cf4a5f7b1b762dd265181105004e2.
- 10:19 AM Bug report #15627 (Closed): Icons not displayed in QGIS plugin manager for python plugins
- Applied in changeset commit:qgis|248bc5db032cf4a5f7b1b762dd265181105004e2.
- 10:19 AM Revision 248bc5db (qgis): Fix #15627: missing plugin icons in Plugin Manager
- 09:54 AM Revision a7ffde6c (qgis): [ui][bugfix] lineedit add margin for X icon
- Fixes #17262
Needs backporting - 09:54 AM Bug report #15984: Colour bars in colour chooser UI are rendered with interleaved stripes
- This also affects master.
Check the attached screenshot
- 09:45 AM Revision fe933d2d (qgis): [ui][hidpi] Form line edit: compute icon size instead of hardcoding
- 08:45 AM Feature request #17531: Request for a search box of loaded layers acting on TOC
- Andreas Neumann wrote:
> Hi Antonio,
>
> This is already implemented in the upcoming QGIS 3.
>
> There is a se... - 08:33 AM Feature request #17531 (Closed): Request for a search box of loaded layers acting on TOC
- Hi Antonio,
This is already implemented in the upcoming QGIS 3.
There is a search box in the status bar in the ... - 08:33 AM Feature request #17531 (Closed): Request for a search box of loaded layers acting on TOC
- Hi Antonio,
This is already implemented in the upcoming QGIS 3.
There is a search box in the status bar in the ... - 07:58 AM Feature request #17531 (Closed): Request for a search box of loaded layers acting on TOC
- Can you implement a search box that acts on the TOC?
It would be useful, to find a specific layer by name, when wor... - 08:44 AM Bug report #17408 (Closed): Relation reference widgets randomly don't show the correct display value
- The issue doesn't appear anymore. Perhaps it was a side effect of something else.
Closing it now. - 08:44 AM Bug report #17408 (Closed): Relation reference widgets randomly don't show the correct display value
- The issue doesn't appear anymore. Perhaps it was a side effect of something else.
Closing it now. - 08:41 AM Bug report #17504: "Pixel Size" and "no data value" in raster layer metadata missing (2.99)
- https://github.com/qgis/QGIS/pull/5700 is adding back all these information in the "Information" panel. I'm currently...
- 08:34 AM Feature request #17532 (Closed): Request for a search box of loaded layers acting on TOC
- duplicate of #17531
- 08:34 AM Feature request #17532 (Closed): Request for a search box of loaded layers acting on TOC
- duplicate of #17531
- 08:00 AM Feature request #17532 (Closed): Request for a search box of loaded layers acting on TOC
- Can you implement a search box that acts on the TOC?
It would be useful to search a layer by name when working with... - 08:08 AM Revision e98842e3 (qgis): Merge pull request #5699 from m-kuhn/valueRelationMultiSelect
- Fixes for Value relation widget, multi select
- 08:08 AM Bug report #17521 (Closed): Freeze when loading form for feature with ValueRelation with multiple...
- Applied in changeset commit:qgis|59cf9f329c99a55e05d921bc9c90a1bac81ed3ea.
- 08:08 AM Bug report #17521 (Closed): Freeze when loading form for feature with ValueRelation with multiple...
- Applied in changeset commit:qgis|59cf9f329c99a55e05d921bc9c90a1bac81ed3ea.
- 07:54 AM Bug report #17530 (Closed): 3d: not possible to use linestrings with z coordinates
- Currently it's not possible to use linestrings with z coordinates in the absolute height mode.
This is because lin... - 07:53 AM Revision 9d8a39fa (qgis): Merge pull request #5694 from elpaso/bugfix-17518-pg-import--without-sc...
- [bugfix][postgres] Browser panel D&D a layer onto a postgresql connection tree …
- 07:53 AM Bug report #17518 (Closed): Browser panel D&D a layer onto a postgresql connection tree node icon...
- Applied in changeset commit:qgis|23dfb1de57bfa701f4ed2a9fe1b334497732c3ba.
- 07:53 AM Bug report #17518 (Closed): Browser panel D&D a layer onto a postgresql connection tree node icon...
- Applied in changeset commit:qgis|23dfb1de57bfa701f4ed2a9fe1b334497732c3ba.
- 06:43 AM Revision f8d83951 (qgis): Fix indentation
- 06:27 AM Revision 060b3e3a (qgis): [ArcGIS REST] fix fallback feature id value (followup to f32791e)
- 05:44 AM Revision 07e4c572 (qgis): Add some unit tests for DXF export
- 05:34 AM Revision f32791ee (qgis): [ArcGIS REST] fix caching logic for extent filtered requests
- 03:59 AM Revision 1535ff84 (qgis): [dxf][feature] Add option to export labels as text elements, instead of...
- Sponsored by SMEC
- 03:59 AM Revision d2369425 (qgis): Merge pull request #5650 from nyalldawson/proc_gpkg
- [FEATURE][processing] Package layers algorithm
- 02:46 AM Revision 0a18b1fd (qgis): Update sip
- 02:27 AM Revision fada3d9a (qgis): Add unit test for package algorithm
- 01:01 AM Revision a8eee624 (qgis): [FEATURE][processing] Package layers algorithm
- Allows multiple vector layers to be collected together into a
geopackage database output
Previously all existing met... - 01:01 AM Revision e6d86bba (qgis): [processing] Generalise modeler multi-step feedback proxy for use
- outside of modeler
This can be useful too for individual algorithms
2017-11-22
- 12:42 AM Bug report #17527 (Closed): 3d: holding ctrl while zooming should perform a "fine" zoom
- Just like in canvas and composer, holding the ctrl key while using the mouse wheel to zoom in a 3d view should result...
- 12:03 AM Revision d03b6f43 (qgis): Fix world origin and camera position on terrain change (fixes #17514)
- This makes "zoom full" in 3D view working again after modification of terrain generator.
Also we update the camera po... - 12:03 AM Revision b288a5f5 (qgis): Set initial extent of a new 3D view to extent of the main canvas
- 12:02 AM Bug report #17514 (Closed): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go b...
- Applied in changeset commit:qgis|d03b6f435eed3823353556697faf0f1f1e9b9657.
- 12:02 AM Bug report #17514 (Closed): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go b...
- Applied in changeset commit:qgis|d03b6f435eed3823353556697faf0f1f1e9b9657.
- 05:17 PM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- https://github.com/qgis/QGIS/pull/5698
- 10:56 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- > Yes - you should be able to see the DEM layer in the 3D view...
Thanks after a restart of QGIS it came back. Ver... - 10:44 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- > Used the NZTM tilegrid from https://tiles.maps.linz.io/nz_aerialimagery_basemap/WMTSCapabilities.xml
Thanks - I ... - 10:39 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- > Can you confirm that without the extra WMTS layer the 3D view works fine?
With just the DEM layer added to the p... - 10:31 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- Used the NZTM tilegrid from https://tiles.maps.linz.io/nz_aerialimagery_basemap/WMTSCapabilities.xml
- 10:26 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- What WMTS layer did you use? (seems missing in ticket description)
Using just a DEM terrain tile works for me. Can... - 06:48 AM Bug report #17514: QGIS 3D view - Setting DEM for terrain elevation cause canvas to go blank
- Note this was done using the NZTM projection (EPSG:2193). Both layers had this source projection.
- 06:45 AM Bug report #17514 (Closed): QGIS 3D view - Setting DEM for terrain elevation cause canvas to go b...
- Steps to reproduce:
1. Loaded WMTS layer () and
2. DEM into QGIS project (few tiles in VRT from https://data.linz... - 11:11 PM Bug report #17350: In distance matrix a point is its own neighbour
- 2.18.14 is also affected, but I can't change it in the description.
- 10:57 PM Bug report #17526 (Closed): Building virtual raster deforms whole raster in non native projection
- It seems the whole raster is divided into smaller rectangles which contract or expand (depending on N-S) by a row and...
- 10:56 PM Revision eeaf2d90 (qgis): Update icon path
- 10:14 PM Revision 6728e6a7 (qgis): Install missing icon
- 09:38 PM Bug report #17525 (Closed): subform in automatic generated relation referende widget is not visib...
- In automatic generated relation reference widget, the subform is no more visible in 2.99 QGIS-Codeversion b058df7d1d...
- 08:21 PM Bug report #17416: Crash on enabling 3D renderer for point layer
- It happens with all QGIS sample Shapefiles (point, line, and polygon).
What do you mean with "basic 3D map view"? ... - 05:53 PM Bug report #17416: Crash on enabling 3D renderer for point layer
- Unfortunately I cannot replicate (on linux).
Does that happen just with this point layer? Or any point layer you t... - 07:41 PM Bug report #17520 (Closed): Point Cluster Rendering
- Those features are coming with qgis 3.0
- 07:41 PM Bug report #17520 (Closed): Point Cluster Rendering
- Those features are coming with qgis 3.0
- 03:17 PM Bug report #17520 (Closed): Point Cluster Rendering
- In QGIS 2.18.14/13 Windows 10 64bits.
The feature point cluster rendering is not providing all the tools.
Field... - 07:13 PM Bug report #17493: QGIS 3D uses a lot of CPU even when idle
- Thanks for looking at this Martin.
It would be really good to fix this as it's draining my laptop power very quick... - 09:32 AM Bug report #17493: QGIS 3D uses a lot of CPU even when idle
- On my machine the 3D view keeps one CPU core completely busy, so yes it is normal that the CPU fan needs to be starte...
- 06:55 PM Bug report #17498 (Closed): WMS GetFeatureInfo requests not working
- Applied in changeset commit:qgis|94a1e68a25199e455bc6126ed02c55ff250defa9.
- 06:55 PM Bug report #17498 (Closed): WMS GetFeatureInfo requests not working
- Applied in changeset commit:qgis|94a1e68a25199e455bc6126ed02c55ff250defa9.
- 06:51 PM Revision 94a1e68a (qgis): [bugfix][wms] Fix GetFeatureInfo
- Fixes #17498 WMS GetFeatureInfo requests not working
Use the right variable instead of an
unitialized one ( followup... - 06:50 PM Bug report #17524 (Feedback): Windows: cannot save updates in csv file opened as OGR vector layer
- Steps to reproduce:
1. Choose _Add vector layer_ option
2. Load attached csv file
3. When file is loaded as a la... - 06:43 PM Bug report #17523 (Closed): Raster calculator cannot handle huge raster files
- Hi,
QGis 2.99 crashes when trying to use the raster calculator ("Dem Sol 151013@1" * 2) with very large rasters (84G... - 06:31 PM Feature request #17522 (Open): when opening a layer from geopackage use the sld format if qml for...
- qgis 2.18 now has an option to store style on a geopackage, when opening a layer from geopackage this style is used t...
- 06:15 PM Feature request #17474: when opening qgis by clicking gpkg -> open with qgis use projectinfo if a...
- hi today i noticed the 2.18 has functionality to save a style on a geopackage
and indeed when this style is saved an... - 05:51 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Alexander Bruy wrote:
> QGIS help system *does work as expected*. As were outlined in QEP and as we all agreed durin... - 05:51 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Alexander Bruy wrote:
> QGIS help system *does work as expected*. As were outlined in QEP and as we all agreed durin... - 08:46 AM Bug report #17486 (Feedback): Help button does not work in its default implementation (returns a ...
- QGIS help system *does work as expected*. As were outlined in QEP and as we all agreed during QEP and PR discussion, ...
- 08:46 AM Bug report #17486 (Feedback): Help button does not work in its default implementation (returns a ...
- QGIS help system *does work as expected*. As were outlined in QEP and as we all agreed during QEP and PR discussion, ...
- 05:50 PM Revision b448826d (qgis): Fix reading of multi selection ValueRelation widgets
- 05:50 PM Revision 59cf9f32 (qgis): Avoid recursion in ValueRelation widget
- Fix #17521
- 05:43 PM Bug report #17301: 3d view doesn't work with global basemaps
- This may be resolved with https://github.com/qgis/QGIS/pull/5698
- 05:39 PM Bug report #16802 (Feedback): Master crashes with 2 WMTS layers and scrollwheel use
- Tested right now in master but I wasn't able to reproduce.
Can you please try latest master and confirm the the bug ... - 05:39 PM Bug report #16802 (Feedback): Master crashes with 2 WMTS layers and scrollwheel use
- Tested right now in master but I wasn't able to reproduce.
Can you please try latest master and confirm the the bug ... - 05:36 PM Bug report #17521 (Closed): Freeze when loading form for feature with ValueRelation with multiple...
- Under some circumstances, QGIS freezes when a feature form is opened with a ValueRelation widget with multi selection...
- 05:30 PM Bug report #17315: 3D Viewer: QGIS Crash when activating 3D Map view and 3D renderer
- Unfortunately I can't reproduce (on linux).
Could you try again if the crash dialog does not give you more informa... - 05:22 PM Revision 9f56878d (qgis): [bugfix] Add some more logic to get the schema name if empty
- 04:45 PM Revision 087087f3 (qgis): Merge pull request #5696 from elpaso/bugfix-17517-singlebandgrey-crash
- [bugfix] Crash on raster layer render change from python
Everything looks good to me, thanks @elpaso - 04:44 PM Bug report #17517 (Closed): Crash on raster layer render change from python
- Applied in changeset commit:qgis|98d2dcbf7acf9e2e60edffb5f2d667dceadf6b0c.
- 04:44 PM Bug report #17517 (Closed): Crash on raster layer render change from python
- Applied in changeset commit:qgis|98d2dcbf7acf9e2e60edffb5f2d667dceadf6b0c.
- 03:21 PM Bug report #17517: Crash on raster layer render change from python
- PR: https://github.com/qgis/QGIS/pull/5696
Backport will follow .... - 03:21 PM Bug report #17517: Crash on raster layer render change from python
- PR: https://github.com/qgis/QGIS/pull/5696
Backport will follow .... - 03:21 PM Bug report #17517: Crash on raster layer render change from python
- PR: https://github.com/qgis/QGIS/pull/5696
Backport will follow .... - 03:02 PM Bug report #17517: Crash on raster layer render change from python
- also affects master
- 11:51 AM Bug report #17517 (Closed): Crash on raster layer render change from python
- Following the cookbook exemple, or simply loading a raster layer in qgis, making it active, and issuing in the python...
- 03:58 PM Revision ade6b609 (qgis): Merge pull request #5688 from m-kuhn/fix17496
- Relation reference widget: apply conditional styles
- 03:58 PM Bug report #17496 (Closed): Conditional formatting of inactive features not applied on relatin re...
- Applied in changeset commit:qgis|a374ebe96593949af1642644304dbda4f1d89a29.
- 03:58 PM Bug report #17496 (Closed): Conditional formatting of inactive features not applied on relatin re...
- Applied in changeset commit:qgis|a374ebe96593949af1642644304dbda4f1d89a29.
- 03:42 PM Revision 880af676 (qgis): add inforce to spelling.dat
- 03:42 PM Revision 83386fb1 (qgis): typo: inforced->enforced
- 03:39 PM Revision aef1b9ab (qgis): Merge pull request #5693 from pblottiere/wms_flaky2
- [server] Enable all WMS tests (GetMap, GetPrint, GetLegendGraphics)
- 03:18 PM Revision 98d2dcbf (qgis): [bugfix] Crash on raster layer render change from python
- Fixes #17517
Requires backporting - 02:55 PM Revision 4693f1a4 (qgis): Add some tests
- 02:46 PM Revision 577c1f2e (qgis): Fixes #16798 FilterFid feature requests with virtual layers
- 02:31 PM Bug report #17186 (Closed): DB Manager and QGIS/Processing import in PostGIS tools are not adding...
- 02:27 PM Bug report #17186 (Feedback): DB Manager and QGIS/Processing import in PostGIS tools are not addi...
- I cannot reproduce in master nor in 2.18.14 (tested from DB manager)
- 02:27 PM Bug report #17186 (Feedback): DB Manager and QGIS/Processing import in PostGIS tools are not addi...
- I cannot reproduce in master nor in 2.18.14 (tested from DB manager)
- 01:09 PM Bug report #17186: DB Manager and QGIS/Processing import in PostGIS tools are not adding "nextval...
- I verified in master and there is nothing buggy in the provider itself (when D&D from the browser the nextval() is cr...
- 02:30 PM Bug report #17185 (Closed): Data loss when discarding changes in a PostGIS layer
- Split features work correctly with a shapefile-imported PG table on both 2.x and master.
- 02:30 PM Bug report #17185 (Closed): Data loss when discarding changes in a PostGIS layer
- Split features work correctly with a shapefile-imported PG table on both 2.x and master.
- 01:25 PM Bug report #17185 (Feedback): Data loss when discarding changes in a PostGIS layer
- I canot reproduce the first step in master: importing the table from a shapefile creates the sequence (nextval correc...
- 02:20 PM Bug report #17519 (Closed): GetPrint issue: empty map in PDF
- I have a case where the generated PDF has an empty map:
!http://pix.toile-libre.org/upload/original/1511356679.jpg... - 01:05 PM Bug report #17518 (In Progress): Browser panel D&D a layer onto a postgresql connection tree node...
- PR https://github.com/qgis/QGIS/pull/5694
- 12:20 PM Bug report #17518 (Closed): Browser panel D&D a layer onto a postgresql connection tree node icon...
- Schema name is undefined when dropping onto the connection node.
Patch available, just defaults to "public", I wil... - 01:02 PM Revision 23dfb1de (qgis): [bugfix] Browser panel D&D a layer onto a postgresql connection tree no...
- Fixes #17518 by defaulting to "public" if no schema is given
- 12:49 PM Revision d6d40970 (qgis): Merge pull request #5692 from manisandro/afsshareddata_mutex
- [ArcGIS REST] Add missing mutex to QgsAfsProvider (fixes #17513)
- 12:48 PM Bug report #17513 (Closed): ArcGIS AFS crasher on qgis master
- Applied in changeset commit:qgis|9ed26361a6448fe1c0c8e263b0087d5bd8593f6b.
- 12:48 PM Bug report #17513 (Closed): ArcGIS AFS crasher on qgis master
- Applied in changeset commit:qgis|9ed26361a6448fe1c0c8e263b0087d5bd8593f6b.
- 06:03 AM Bug report #17513: ArcGIS AFS crasher on qgis master
- Simpler steps to reproduce:
# Add the "burials" layer from the AFS server mentioned above
# Zoom in to show only a ... - 05:19 AM Bug report #17513 (Closed): ArcGIS AFS crasher on qgis master
- QGIS master dies on me usually within minutes of adding an AFS layer.
*Steps to reproduce*
# Create a new projec... - 12:27 PM Revision 35632989 (qgis): Enable all WMS tests (GetMap, GetPrint, GetLegendGraphics)
- 11:58 AM Revision e9309eec (qgis): [ArcGIS REST] Also protect mCache.clear() by mutex
- 11:48 AM Revision 9ed26361 (qgis): [ArcGIS REST] Add missing mutex to QgsAfsProvider (fixes #17513)
- 11:46 AM Bug report #17507: Unable to edit filtered GeoPackage layer
- Backporting will follow ....
- 11:45 AM Bug report #17507 (Closed): Unable to edit filtered GeoPackage layer
- Applied in changeset commit:qgis|d775a0d97aa9f51e919f268f13ebf039df7e0350.
- 11:45 AM Bug report #17507 (Closed): Unable to edit filtered GeoPackage layer
- Applied in changeset commit:qgis|d775a0d97aa9f51e919f268f13ebf039df7e0350.
- 09:23 AM Bug report #17507 (In Progress): Unable to edit filtered GeoPackage layer
- PR: https://github.com/qgis/QGIS/pull/5691
- 09:23 AM Bug report #17507 (In Progress): Unable to edit filtered GeoPackage layer
- PR: https://github.com/qgis/QGIS/pull/5691
- 09:23 AM Bug report #17507 (In Progress): Unable to edit filtered GeoPackage layer
- PR: https://github.com/qgis/QGIS/pull/5691
- 11:45 AM Revision db3c93c3 (qgis): Merge pull request #5691 from elpaso/bugfix-17507-gpkg-filtered-edit
- [app][bugfix] Update layer editable state when filter is changed
- 11:45 AM Revision 059c9977 (qgis): Merge pull request #5687 from elpaso/bugfix-16753-offline-editing-wfs-w...
- [offline-editing] Add a warning icon and tooltip to WFS sources
- 11:45 AM Bug report #16753 (Closed): off-line editing synchronization cripples the original datasource if ...
- Applied in changeset commit:qgis|68ddf3b9916a1148b3f645856c13ae0232e8ecca.
- 11:45 AM Bug report #16753 (Closed): off-line editing synchronization cripples the original datasource if ...
- Applied in changeset commit:qgis|68ddf3b9916a1148b3f645856c13ae0232e8ecca.
- 11:44 AM Revision 5f6c1bac (qgis): Rewording of warning message for WFS unstable pk
- 11:13 AM Revision 7d926417 (qgis): Add QString operator to QgsExpression
- 11:13 AM Revision a374ebe9 (qgis): Relation referenc widget: apply conditional styles
- Fix #17496
- 11:01 AM Bug report #17487: rotate labels tool does not work properly when canvas is rotated
- I just checked it on master ( b058df7d1d ) and the problem still exists (see attached screencast).
- 10:58 AM Revision 58bfbd51 (qgis): Merge pull request #5658 from pblottiere/qurl_obsolete
- [server] Fix obsolete QUrl method
- 10:31 AM Revision 7e727fd8 (qgis): Merge pull request #5640 from pblottiere/wms_flaky
- [server] WIP: detect WMS flaky tests
- 09:42 AM Revision a416f4e3 (qgis): Fix obsolete call of addQueryItem on QUrl in server
- 09:32 AM Revision 5945a84d (qgis): Merge pull request #5638 from pblottiere/bugfix_joins
- [bugfix] Fixes #17450 by correctly setting the join info ordered list
- 09:31 AM Bug report #17450 (Closed): values for cached join fields randomely become null when dragging canvas
- Applied in changeset commit:qgis|333a8e9e9464f4901d185a410be64fcc2b1c2c9c.
- 09:31 AM Bug report #17450 (Closed): values for cached join fields randomely become null when dragging canvas
- Applied in changeset commit:qgis|333a8e9e9464f4901d185a410be64fcc2b1c2c9c.
- 09:25 AM Bug report #17516 (Closed): Variables are not correctly resolved in atlas layer filter expression
- When qgis variable (@something) is used in atlas layer filter expression, no matching atlas features are returned. Wh...
- 09:21 AM Revision d775a0d9 (qgis): [app][bugfix] Update layer editable state when filter is changed
- Fixes #17507
- 09:18 AM Bug report #17512 (Closed): 3D view on QGIS3 causes 175% CPU usage when idle.
- Indeed, it is a duplicate of #17493
- 09:18 AM Bug report #17512 (Closed): 3D view on QGIS3 causes 175% CPU usage when idle.
- Indeed, it is a duplicate of #17493
- 05:12 AM Bug report #17512: 3D view on QGIS3 causes 175% CPU usage when idle.
- Note this might be a duplicate of #17493
- 05:01 AM Bug report #17512 (Closed): 3D view on QGIS3 causes 175% CPU usage when idle.
- Was only with default OSM basemap at full extent when I opened the screen.
QGIS built with homebrew using the foll... - 08:56 AM Revision 10b34b90 (qgis): Merge pull request #5660 from pblottiere/bugfix-clickxy-218
- [backport][bugfix] Fixes #16852 by adding click_x and click_y variables to resolve actions
- 08:51 AM Revision 2169c880 (qgis): Initialize some more vars to make Valgrind happy
- 08:46 AM Revision d24de06c (qgis): Split some WMS tests
- 08:46 AM Revision fd1539f5 (qgis): Skip test instead of commenting
- 08:46 AM Revision 1c81c423 (qgis): Disable a test
- 08:46 AM Revision e29f605b (qgis): Add some masks and set a higher threshold for comparing images
- 08:30 AM Revision 333a8e9e (qgis): Fixes #17450 by correctly setting the join info ordered list
- 07:44 AM Bug report #16935: Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads to error a...
- @giovanni, not sure: probably slightly related, if you want I can have a look to see if I can fix it in the same way ...
- 07:32 AM Bug report #17510: qgis crashed on closing
- This sounds like a plugin issue I found the other day. Do you happen to have LatLongTools installed?
- 07:24 AM Bug report #17510: qgis crashed on closing
- qgis2 folder isn't used anymore remember. It's in the profiles folder now. Make a new profile and see if you get the...
- 07:25 AM Bug report #17515 (Closed): 3D crash with large-ish polygon layer
- h2. User Feedback
I will attach a sample data set tonight once I can check it on a different machine.
h2. Rep... - 02:42 AM Bug report #17488: Processing Modeler: Defective GUI
- Also here on macOS. I had a fix, that has to do with object parenting and layout insertion, but unfortunately can not...
2017-11-21
- 09:27 PM Revision b058df7d (qgis): Merge pull request #5686 from nyalldawson/encoding
- [processing] Don't use crappy Qt file picker dialog
- 09:22 PM Bug report #17485: Rendering no longer updated after few saved edits
- Giovanni Manghi wrote:
> Is this a regression since 2.18 or it regressed within master development?
I have used t... - 04:49 PM Bug report #17485 (Feedback): Rendering no longer updated after few saved edits
- Is this a regression since 2.18 or it regressed within master development?
- 08:26 PM Revision b97c6a8d (qgis): Use native file picker for spatialite export option also
- 07:56 PM Revision d62b4e97 (qgis): Merge pull request #5683 from Gustry/metadata_crs
- fix #17456 improve CRS display in the metadata tab
- 07:56 PM Bug report #17456 (Closed): Memory layer crs seems to not be found by the new metadata tab
- Applied in changeset commit:qgis|b895b74303ff9541b55a9ee9ee12df851625eb26.
- 07:56 PM Bug report #17456 (Closed): Memory layer crs seems to not be found by the new metadata tab
- Applied in changeset commit:qgis|b895b74303ff9541b55a9ee9ee12df851625eb26.
- 11:57 AM Bug report #17456: Memory layer crs seems to not be found by the new metadata tab
- I made a PR already https://github.com/qgis/QGIS/pull/5683 to fix the invalid vs projected.
But it still won't fill ... - 11:53 AM Bug report #17456 (Open): Memory layer crs seems to not be found by the new metadata tab
- > It will not be filled automatically, the user must fill metadata.
Indeed I didn't set the CRS in metadata wizard... - 11:01 AM Bug report #17456 (Feedback): Memory layer crs seems to not be found by the new metadata tab
- 10:43 AM Bug report #17456: Memory layer crs seems to not be found by the new metadata tab
- This setting is coming from the metadata wizard. You didn't set the CRS there. It will not be filled automatically, t...
- 07:17 PM Bug report #16935: Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads to error a...
- Hi Alessandro, is #17185 related?
- 02:00 PM Bug report #16935 (Closed): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads t...
- Applied in changeset commit:qgis|73d6765e89dc5876ab5895a168b0585822d08607.
- 02:00 PM Bug report #16935 (Closed): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads t...
- Applied in changeset commit:qgis|73d6765e89dc5876ab5895a168b0585822d08607.
- 06:48 PM Bug report #17507: Unable to edit filtered GeoPackage layer
- Alessandro Pasotti wrote:
> It actually crashes QGIS master/latest when removing the filter ...
2.18.14 works wit... - 06:27 PM Bug report #17507: Unable to edit filtered GeoPackage layer
- I filed another ticket for the crash (probably unrelated) #17511
- 03:53 PM Bug report #17507: Unable to edit filtered GeoPackage layer
- It actually crashes QGIS master/latest when removing the filter ...
- 11:58 AM Bug report #17507: Unable to edit filtered GeoPackage layer
- master is also affected. I'm tagging this as a regression, at least the part that removing the filter does not make t...
- 11:48 AM Bug report #17507 (Closed): Unable to edit filtered GeoPackage layer
- CASE 1
# open existing geopackage layer
# swich layer in edit mode
# add new features
# commit changes
# exit fr... - 06:45 PM Revision bb3b6898 (qgis): Initialize some vars to make Valgrind happy
- 06:34 PM Bug report #17509: @geometry_point_count always equal to 1
- Giovanni Manghi wrote:
> Alexey T wrote:
> > Giovanni Manghi wrote:
> > > Is this a regression?
> >
> > My engl... - 06:19 PM Bug report #17509: @geometry_point_count always equal to 1
- Alexey T wrote:
> Giovanni Manghi wrote:
> > Is this a regression?
>
> My english is not very good, I don't unde... - 06:18 PM Bug report #17509: @geometry_point_count always equal to 1
- Giovanni Manghi wrote:
> Is this a regression?
My english is not very good, I don't understand your question. Ple... - 05:00 PM Bug report #17509 (Feedback): @geometry_point_count always equal to 1
- Is this a regression?
- 05:00 PM Bug report #17509 (Feedback): @geometry_point_count always equal to 1
- Is this a regression?
- 02:55 PM Bug report #17509 (Closed): @geometry_point_count always equal to 1
- I am using @geometry_point_count to style marker line feature.
Looks like this variable is always equal to 1. - 06:11 PM Bug report #17511: adding two instances of the same gpkg layer and editing on one of them crashes...
- Stack trace http://dpaste.com/2MM3ZC7
- 06:02 PM Bug report #17511 (Closed): adding two instances of the same gpkg layer and editing on one of the...
See #17507 for the sample project and data
steps to reproduce
- load the sample project
- by using the ogr bro...- 06:08 PM Bug report #17510 (Feedback): qgis crashed on closing
- Is the crash replicable or is was random event? have you tried on a clean install (i.e. removing the .qgis2 folder)?
- 06:08 PM Bug report #17510 (Feedback): qgis crashed on closing
- Is the crash replicable or is was random event? have you tried on a clean install (i.e. removing the .qgis2 folder)?
- 06:08 PM Bug report #17510 (Feedback): qgis crashed on closing
- Is the crash replicable or is was random event? have you tried on a clean install (i.e. removing the .qgis2 folder)?
- 05:34 PM Bug report #17510 (Closed): qgis crashed on closing
- ... without any troubles before. just crashed when
the Oh Uh! -interface asked me to send a report ... so, here it ... - 05:16 PM Revision 59cc5434 (qgis): switch display between identification section and provider in the metad...
- 05:06 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Giovanni Manghi wrote:
> is there an issue filed on github? cheers!
A kind of. See https://github.com/qgis/QGIS-D... - 03:45 PM Bug report #17486: Help button does not work in its default implementation (returns a wrong url)
- Harrissou Santanna wrote:
> Yes, the fix has to be done in the QGIS-Documentation Github repository if that's the qu... - 02:13 PM Bug report #17486 (Open): Help button does not work in its default implementation (returns a wron...
- Yes, the fix has to be done in the QGIS-Documentation Github repository if that's the question. But the "entry point"...
- 02:07 PM Bug report #17486 (Feedback): Help button does not work in its default implementation (returns a ...
- If I understand correctly this need to be fixed in the QGIS web site, correct?
- 05:00 PM Revision b895b743 (qgis): fix #17456 improve CRS display in the metadata tab
- 04:58 PM Revision cbf4a891 (qgis): [ogr] Re-compute capabilities when a subset string is changed
- 04:57 PM Revision 9866b240 (qgis): [app] Don't trigger repaint twice
- 04:46 PM Bug report #17479 (Feedback): WMS provider not picking up Geoserver tilesets
- Can you show what are the configurations you use on the geoserver/geowebcache side? I tried with data of my own (and ...
- 04:43 PM Bug report #17508: SaveAs Geopackage: TEXT fields are converted to TEXT(255)
- Richard Duivenvoorde wrote:
> Hi Giovanni, you are right. I did not even look INTO the gpkg :-(
>
> But what are ... - 04:42 PM Bug report #17508: SaveAs Geopackage: TEXT fields are converted to TEXT(255)
- Hi Giovanni, you are right. I did not even look INTO the gpkg :-(
But what are these 'warning's then?
Grepping on... - 04:42 PM Bug report #17508: SaveAs Geopackage: TEXT fields are converted to TEXT(255)
- Hi Giovanni, you are right. I did not even look INTO the gpkg :-(
But what are these 'warning's then?
Grepping on... - 04:17 PM Bug report #17508 (Feedback): SaveAs Geopackage: TEXT fields are converted to TEXT(255)
- Hi Richard, just tried on master and had no issues, ex:
Omgevingsvergunning Op adres vindt u een korte omschrijvin... - 02:25 PM Bug report #17508 (Open): SaveAs Geopackage: TEXT fields are converted to TEXT(255)
Connecting to a WFS like:
http://geozet.koop.overheid.nl/wfs?version=1.0.0&request=GetCapabilities
then >70000 fe...- 04:42 PM Bug report #17483: In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has no attrib...
- I mean #17488
I just tried on clean master installation (from repo) on completely clean ubuntu 16.04 installation.... - 04:38 PM Bug report #17483: In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has no attrib...
- > 1) the modeler GUI is pretty much broken in master
What do you mean? AFAIK, everything looks fine for me. Except... - 04:07 PM Bug report #17483: In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has no attrib...
- I'm not able to test this because
1) the modeler GUI is pretty much broken in master
2) when trying to add a algo... - 04:06 PM Revision 17ca25fb (qgis): [app] Use unique pointer for query builder
- 04:03 PM Bug report #17487 (Feedback): rotate labels tool does not work properly when canvas is rotated
- It seems to work fine on master, can you confirm/check? Thanks!
- 03:50 PM Bug report #17484: Docked attribute table - not remembering position
- Or to the left, or to the top. It always show docked to the bottom after restarting qgis.
- 03:50 PM Bug report #17484: Docked attribute table - not remembering position
- Or to the left, or to the top. It always show docked to the bottom after restarting qgis.
- 03:42 PM Bug report #17503 (Closed): Custom CRS is duplicated in 2.99
- 02:42 PM Bug report #17503: Custom CRS is duplicated in 2.99
- I have updated to the most recent build 95cf299099 and the issue indeed appears to be fixed.
At first I had 6 duplic... - 12:31 PM Bug report #17503 (Feedback): Custom CRS is duplicated in 2.99
- This should be fixed since last week - can you ensure that you're running a recent build, and then try removing all t...
- 09:44 AM Bug report #17503 (Closed): Custom CRS is duplicated in 2.99
- User defined CRS, the name and parameters are duplicated several times, and appear as duplicate rows when setting pro...
- 03:35 PM Revision 5be5c1e6 (qgis): [grass] Fix build for metadata->htmlMetadata
- 03:08 PM Revision 68ddf3b9 (qgis): [offline-editing] Add a warning icon and tooltip to WFS sources
- Fixes #16753 off-line editing synchronization cripples
the original datasource if this is a WFS-T Layer - 02:42 PM Revision ea7c2af7 (qgis): [dbmanager] fixes #17476: QGIS master: update SQL layer error if name c...
- 02:36 PM Bug report #17476 (Closed): QGIS master: update SQL layer error if name contains uppercase chars
- Applied in changeset commit:qgis|9b4a6c08f8f2ad57a65119f59752c1d2667a8d77.
- 02:36 PM Bug report #17476 (Closed): QGIS master: update SQL layer error if name contains uppercase chars
- Applied in changeset commit:qgis|9b4a6c08f8f2ad57a65119f59752c1d2667a8d77.
- 02:35 PM Revision 9b4a6c08 (qgis): [dbmanager] fixes #17476: QGIS master: update SQL layer error if name c...
- 02:05 PM Bug report #17488: Processing Modeler: Defective GUI
- Confirmed here on ubuntu 16.04.
- 02:05 PM Bug report #17488: Processing Modeler: Defective GUI
- Confirmed here on ubuntu 16.04.
- 02:04 PM Bug report #17490: Confirmation dialog for save / rollback / cancel all layers changes no longer ...
- I see this as a bug/regression, but maybe a developer wants to chime in here as it could be a change made on purpose.
- 02:04 PM Bug report #17490: Confirmation dialog for save / rollback / cancel all layers changes no longer ...
- I see this as a bug/regression, but maybe a developer wants to chime in here as it could be a change made on purpose.
- 02:04 PM Bug report #17490: Confirmation dialog for save / rollback / cancel all layers changes no longer ...
- I see this as a bug/regression, but maybe a developer wants to chime in here as it could be a change made on purpose.
- 02:00 PM Revision b2c6464e (qgis): Merge pull request #5679 from elpaso/bugfix-16935-gpkg-split-features
- [bugfix] Editing a GPKG layer added by d&d leads
- 01:49 PM Bug report #17500 (Feedback): Crash when deleting fields on joined layer
- Tried on the same platform and QGIS master and no issues here. Does it work ok on master for you?
- 01:30 PM Bug report #15754 (Closed): editing several layers in geopackage - database is locked
- 12:20 PM Bug report #15754: editing several layers in geopackage - database is locked
- I tried with QGIS master (2.99.0, code version af5b2a750a) and also on 2.18.14. I didn't experience the problem any m...
- 01:29 PM Bug report #17501: Problem with OTF projection of features crossing the dateline
- That depends on the features crossing the dateline. Is something that can be fixed at data level, not sure if is also...
- 01:05 PM Bug report #17498 (Open): WMS GetFeatureInfo requests not working
- 12:22 PM Bug report #17498: WMS GetFeatureInfo requests not working
- The following MapServer WMS has the issue on: QGIS version 2.99.0-Master QGIS code revision af5b2a750a
http://ogc.... - 11:19 AM Bug report #17498: WMS GetFeatureInfo requests not working
- Does the same endpoint work as expected on 2.18.14?
- 11:18 AM Bug report #17498 (Feedback): WMS GetFeatureInfo requests not working
- Can you provide the full URL of the endpoint? what is the endpoint? mapserver? geoserver? else?
- 01:01 PM Revision a29fad44 (qgis): Merge pull request #5684 from Gustry/provider_metadata
- rename metadata() to htmlMetadata() in QgsRasterDataProvider
- 12:24 PM Revision 31086d3a (qgis): [processing] Move destination encoding option to separate menu action
- ...instead of embedding in output destination file selector. Otherwise
Qt downgrades the file picker to the Qt basic ... - 12:10 PM Bug report #17499 (Feedback): Identify results not working correctly
- Cannot confirm here with the latest master on Linux (postgresql also on the same Linux box).
- 12:01 PM Bug report #17455: vector layer properties: Wrong CRS reported in the Informations and Metadata tabs
- I agree it should display a warning if both CRS from the layer and CRS from metadata are not the same.
The CRS der... - 11:51 AM Bug report #17455 (Open): vector layer properties: Wrong CRS reported in the Informations and Met...
- 11:48 AM Bug report #17455: vector layer properties: Wrong CRS reported in the Informations and Metadata tabs
- > Harrissou, did you set another CRS in the metadata wizard?
> This CRS is coming from only the metadata wizard.
... - 11:04 AM Bug report #17455 (Feedback): vector layer properties: Wrong CRS reported in the Informations and...
- 10:56 AM Bug report #17455: vector layer properties: Wrong CRS reported in the Informations and Metadata tabs
- Harrissou, did you set another CRS in the metadata wizard?
This CRS is coming from only the metadata wizard.
Stev... - 11:52 AM Revision 4bc4494e (qgis): [ui] split Z/M values checkbox in new memory layer dialog (#5685)
- 11:39 AM Bug report #17481 (Feedback): 2.18.14 crashes if opening a project from a read only network share.
- Can you try help clarify the issue and update the title, description affected version, etc.? Thanks.
- 11:38 AM Revision 37347121 (qgis): rename metadata() to htmlMetadata() in QgsRasterDataProvider
- 11:38 AM Revision f660d780 (qgis): Add a new dialog for selecting file encoding, QgsEncodingSelectionDialog
- Can be used to prompt users for a file encoding choice
- 11:33 AM Feature request #17506 (Open): An option to decrease/increase symbol at the end
- For line features there is an option in OCAD to make symbol size decrease or increase along line.
This allows to mak... - 11:19 AM Bug report #17504: "Pixel Size" and "no data value" in raster layer metadata missing (2.99)
- Whoops, I forgot to add that the "No Data Value" is also missing. That's another important one! Unless there was some...
- 10:00 AM Bug report #17504 (Closed): "Pixel Size" and "no data value" in raster layer metadata missing (2.99)
- In 2.14 (and all previous versions I can remember), you can find a raster's Pixel Size in map units in Layer Properti...
- 11:17 AM Revision 0b3f86d0 (qgis): [ui] improve new geopackage layer dialog (#5682)
- - move a number of options under a collapsible group
- rework wording for Z dimension and M values
- disable z and m ... - 10:23 AM Bug report #17505 (Closed): Relation reference widget doesn't update to NULL value when deleting ...
- When checking "allow null" values in relation reference widget, and use the red cross to suppress a referenced foreig...
- 09:30 AM Bug report #16695 (Closed): browser panel restore causes unwanted WMS connections when expanded
- 09:29 AM Bug report #16666 (Closed): New unified add button: file selector sometimes opens behind the Data...
- 09:29 AM Bug report #17160 (Closed): Vulnerability in the proxy settings
- Implemented with https://github.com/qgis/QGIS/pull/5253
- 09:29 AM Bug report #17160 (Closed): Vulnerability in the proxy settings
- Implemented with https://github.com/qgis/QGIS/pull/5253
- 09:27 AM Bug report #17292 (Closed): Data Source Manager: WFS loads layer two time if you use the Add butt...
- 09:25 AM Bug report #17402 (Closed): Authentication settings for WMS/WFS etc. are not migrated from 2 to 3
- Applied in changeset commit:qgis|e05cca2bedac4af67ff3d6db6dcd7d1e14c3be24.
- 09:25 AM Bug report #17402 (Closed): Authentication settings for WMS/WFS etc. are not migrated from 2 to 3
- Applied in changeset commit:qgis|e05cca2bedac4af67ff3d6db6dcd7d1e14c3be24.
- 09:24 AM Revision e05cca2b (qgis): [bugfix][auth] 2to3 settings migrate authcfg for WMS/WFS
- Fixes #17402 Authentication settings for WMS/WFS etc. are not migrated from 2 to 3
- 09:11 AM Revision 62713a50 (qgis): Merge pull request #5510 from m-kuhn/relationsearch
- [FEATURE] Search widget for relations using aggregates
- 09:03 AM Revision a12939d3 (qgis): [ogr] Implement skipConstraintsCheck for fid
- With test.
- 08:35 AM Revision 153c83a3 (qgis): Add @nirvn to AUTHORS, fix missing tab for Paul B.
- 08:32 AM Revision 81b475d2 (qgis): Adjust version number
- 08:29 AM Revision 37b0d4c5 (qgis): Add missing api documentation
- 08:11 AM Revision 05d22bf1 (qgis): @nirvn is a committer
- 02:31 AM Bug report #13573 (Closed): Composer scale bar : the alignment option doesn't work
- Fixed in 3.0 - the alignment option is disabled for non-numeric scale bars.
The correct way to lock the reference ... - 02:31 AM Bug report #13573 (Closed): Composer scale bar : the alignment option doesn't work
- Fixed in 3.0 - the alignment option is disabled for non-numeric scale bars.
The correct way to lock the reference ... - 02:31 AM Bug report #13573 (Closed): Composer scale bar : the alignment option doesn't work
- Fixed in 3.0 - the alignment option is disabled for non-numeric scale bars.
The correct way to lock the reference ... - 02:26 AM Feature request #17022 (Closed): Alignment and positioning of the scale bar
- This is possible - set the item's reference point to middle or right instead. The scale bar alignment option only app...
- 02:26 AM Feature request #17022 (Closed): Alignment and positioning of the scale bar
- This is possible - set the item's reference point to middle or right instead. The scale bar alignment option only app...
2017-11-20
- 11:58 PM Revision 95cf2990 (qgis): Followup c9b8ddc, add unit test
- 09:28 PM Revision 776ca7aa (qgis): Allow min/max aggregate search for double fields
- 09:22 PM Revision c72739b0 (qgis): Show group box for aggregate search
- 09:20 PM Revision f0a84667 (qgis): Hide search widget tool button for aggregate search
- 08:56 PM Revision 53dd5ef5 (qgis): [ogr] Pass default value (-1) for fid columns
- 08:31 PM Revision 7fb3a4eb (qgis): Avoid crash with invalid relation
- 08:31 PM Revision ddca8b65 (qgis): SipConvertToSubClass code for QgsSearchWidgetToolButton
- 08:31 PM Revision 456cebae (qgis): Remove unnneeded method
- 08:31 PM Revision f8a8cb96 (qgis): Fix failing tests
- 08:31 PM Revision bdc47a48 (qgis): Add missing doxymentation
- 08:31 PM Revision 04101c3f (qgis): Add dummy canvas to test
- 08:31 PM Revision 7b45e9df (qgis): Add missing param to docstring
- 08:31 PM Revision f084fc0a (qgis): API documentation all over
- 08:31 PM Revision f5559b51 (qgis): Add QgsAttributeFormWidget
- 08:31 PM Revision fdd00870 (qgis): [FEATURE] Search widget for relations using aggregates
- For each child relations, the subform is visible.
Each attribute of the children has a tool button option to define ... - 08:31 PM Revision 3d2b69eb (qgis): Qt 5.5 compatibility
- 07:57 PM Revision 6d0f2afe (qgis): Fix memory leaks by using sqlite3_close_v2
- 06:30 PM Revision f97b5a54 (qgis): Fix test for primary key constraints
- 06:20 PM Revision dbd4f9ef (qgis): Merge pull request #5677 from mhugo/fix_slow_relation_reference
- Postgresql: don't fetch if there is nothing (fixes #17502)
- 06:20 PM Bug report #17502 (Closed): QGIS eats too much data with relation reference widget
- Applied in changeset commit:qgis|5fb970abbe944b879e018e7c18247377aac8988b.
- 06:20 PM Bug report #17502 (Closed): QGIS eats too much data with relation reference widget
- Applied in changeset commit:qgis|5fb970abbe944b879e018e7c18247377aac8988b.
- 02:57 PM Bug report #17502 (Closed): QGIS eats too much data with relation reference widget
- When using large databases in QGIS 2.18.14, I discovered QGIS was fetching 3 times the referenced table objects.
... - 06:07 PM Revision 89914821 (qgis): [Save As] Set fields export options visible only when compatible
- with the destination format, instead of simply disabling it.
- 05:11 PM Revision ac109e43 (qgis): [bugfix] Do not crash when testing empty virtual layers
- Fixes #17489
Backported from master - 05:08 PM Bug report #16935 (In Progress): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) le...
- for gpkg: https://github.com/qgis/QGIS/pull/5679
Now checking spatialite ... - 05:08 PM Bug report #16935 (In Progress): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) le...
- for gpkg: https://github.com/qgis/QGIS/pull/5679
Now checking spatialite ... - 01:40 PM Bug report #16935: Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads to error a...
- See also: https://lists.osgeo.org/pipermail/qgis-developer/2017-November/050586.html
- 12:14 PM Bug report #16935: Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads to error a...
- Ok, got the error but I'm still unsure about the solution: what happen here is:
- the split geometry operation is ... - 09:49 AM Bug report #16935 (Feedback): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads...
- What's happening here is pretty clear: by splitting the polygon you create a new geometry, but the primary key of the...
- 09:49 AM Bug report #16935 (Feedback): Editing a Spatiallite/GPKG layer added by d&d (or DB Manager) leads...
- What's happening here is pretty clear: by splitting the polygon you create a new geometry, but the primary key of the...
- 05:04 PM Revision 73d6765e (qgis): [bugfix] Editing a GPKG layer added by d&d leads
- ... to error and data corruption
Fixes #16935 for GPKG (OGR), still needs to check spatialite
Thanks to Matthias K... - 04:42 PM Revision 5fb970ab (qgis): Postgresql: don't fetch if there is nothing (fixes #17502)
- 04:37 PM Revision 3eced50c (qgis): Trivial typo fix
- Your spellcheck missed it.
+ updated spelling.dat to catch it next time - 03:57 PM Revision 28322035 (qgis): Merge pull request #5661 from DelazJ/patch-3
- Ask confirmation before removing a map theme
- 03:54 PM Revision 06bae21d (qgis): Merge pull request #5579 from DelazJ/logmessages
- Clarify where and what Log Messages is
- 02:19 PM Bug report #17501 (Feedback): Problem with OTF projection of features crossing the dateline
- The attached layer is causing some odd rendering when using OTF.
To reproduce, download and extract the shapefile.... - 02:10 PM Bug report #17500 (Closed): Crash when deleting fields on joined layer
- Qgis crashes when trying to remove fields from the table on layer created with "Join attributes by location".
Step... - 01:12 PM Bug report #17499 (Closed): Identify results not working correctly
- Possibly related to #17498
When using the identify tool, on a layer loaded from a local PostgreSQL instance, get e... - 01:01 PM Bug report #17498: WMS GetFeatureInfo requests not working
- Looking at the local logs, requests to the MapServer instance that result in the error are like:
/cgi-bin/exemplar... - 12:48 PM Bug report #17498 (Closed): WMS GetFeatureInfo requests not working
- Trying to do a WMS GetFeatureInfo request results in an error such as:
msWMSFeatureInfo(): WMS server error. I... - 12:29 PM Bug report #17497 (Closed): Metasearch 'QDialog' object has no attribute 'on_btnConnect_clicked'
- Fixed in master as per #17347
- 12:29 PM Bug report #17497 (Closed): Metasearch 'QDialog' object has no attribute 'on_btnConnect_clicked'
- Fixed in master as per #17347
- 12:02 PM Bug report #17497 (Closed): Metasearch 'QDialog' object has no attribute 'on_btnConnect_clicked'
- When trying to add a service from MetaSearch in QGIS 2.99 on Windows-64bit get error:
An error has occurred wh... - 12:07 PM Revision 9481067f (qgis): Fix indentation
- 12:06 PM Revision c9b8ddce (qgis): Fix crash in ogr provider when loading layers with subset strings
- 12:06 PM Revision 89f6ca9f (qgis): Fix memory leak
- 11:51 AM Bug report #17458: QGIS freezes when naming a style rule
> I can't understand, it looks like when a child window is open but invisible and mother's wait for an action on it...- 10:30 AM Bug report #17458: QGIS freezes when naming a style rule
- Giovanni Manghi wrote:
> Could you try o a clean install? start from (backup and) delete the ~/.qgis2 folder, then... - 11:29 AM Bug report #17496 (Closed): Conditional formatting of inactive features not applied on relatin re...
- In QGIS 2.18, if one specified conditional formatting on a row (e.g. inactive features are crossed-out or red), the s...
- 11:13 AM Bug report #17233: QGIS Main Window resizes itself upon saving the project to show the 'successfu...
- Just to add WHY this is sometimes painfull: some providers (in my case WFS provider) try to query the full dataset ag...
- 10:24 AM Bug report #17233: QGIS Main Window resizes itself upon saving the project to show the 'successfu...
- The latest master still pushes the window wider, but doesn't push the title bar down as well like earlier ones did.
- 10:50 AM Revision 35459c49 (qgis): Add some tests
- 10:50 AM Revision c9692959 (qgis): Fixes #16852 by adding click_x and click_y variables to resolve actions
- 10:50 AM Revision 4fe00139 (qgis): Update doc and sip binding
- 10:24 AM Revision 06017b92 (qgis): Fix message box logic
- 09:43 AM Revision 4e16665b (qgis): Merge pull request #5674 from elpaso/bugfix-17489-virtual-layer-test-crash
- [bugfix] virtual layer test crash
- 09:42 AM Bug report #17489 (Closed): [Data Source Manager] Click the Test button in the virtual layer tab ...
- Applied in changeset commit:qgis|4272f5d8251cb3ee6a9fde3c3586dd1b2d6c738d.
- 09:42 AM Bug report #17489 (Closed): [Data Source Manager] Click the Test button in the virtual layer tab ...
- Applied in changeset commit:qgis|4272f5d8251cb3ee6a9fde3c3586dd1b2d6c738d.
- 09:17 AM Bug report #17489 (In Progress): [Data Source Manager] Click the Test button in the virtual layer...
- https://github.com/qgis/QGIS/pull/5674
- 09:17 AM Bug report #17489 (In Progress): [Data Source Manager] Click the Test button in the virtual layer...
- https://github.com/qgis/QGIS/pull/5674
- 09:17 AM Bug report #17489 (In Progress): [Data Source Manager] Click the Test button in the virtual layer...
- https://github.com/qgis/QGIS/pull/5674
- 09:36 AM Bug report #17385: No auth-db saved
- Is the problem corrected in the OSGEO4W install? Because in my new, fresh install (installed on the new account on Wi...
- 09:02 AM Revision b3e3bcd1 (qgis): Modernize code (remove "on" from slots)
- 08:55 AM Revision 4272f5d8 (qgis): [bugfix] Do not crash when testing empty virtual layers
- Fixes #17489
Require backporting - 07:34 AM Revision e9ce901a (qgis): Merge pull request #5617 from signedav/longrelationids
- Autogenerated relation names in dialog instead of ids
- 07:24 AM Revision 67b68a84 (qgis): Merge pull request #5578 from gacarrillor/iface_copy_paste_features
- Expose through iface methods to copy/paste features between given layers
- 07:22 AM Revision 970a7236 (qgis): Merge pull request #5666 from signedav/tooltiprelation
- Tooltip of relationstrength in project properties
- 07:13 AM Revision 30ed3153 (qgis): Merge pull request #5614 from signedav/constraintindicators
- Constraint result not displayed in non editable mode
- 01:52 AM Feature request #17495 (Open): Add DXF export functionality to processing
- Currently DXF export is only available from the project menu -> "DXF export" action. We should expose this as a proce...
- 01:51 AM Revision eb2ef6a6 (qgis): Merge pull request #5672 from nyalldawson/provider_fixes2
- Add tests/fixes for some provider issues
- 01:24 AM Revision 8243598f (qgis): Even more memory safety for ogr layers
- 01:13 AM Revision 6db46f73 (qgis): [ogr] Safer layer memory management
- Use unique_ptr with custom deleter to ensure that
QgsOgrProviderUtils::release is called
2017-11-19
- 12:25 AM Revision 163b2e20 (qgis): [ogr] Fix incorrect feature counts after removing subset string, fix leak
- 11:42 PM Revision af5b2a75 (qgis): Add some debugging asserts to ensure that layer renderers
- are used in a thread safe way
- 11:42 PM Revision fe535c5f (qgis): Play it safe and work with clones of symbol renderers
- This fixes some definite crashes, e.g. saving a vector layer
with symbology, which is caused by accessing the same
la... - 11:42 PM Revision a0c6e052 (qgis): Spelling
- 11:42 PM Revision d13eaa6a (qgis): Improve documentation
- 10:30 PM Bug report #17475: QGIS 2.99 Shortest Path not showing shortest route
- Hi there. I couldn't find any gaps in the sections of interest. See files attached.
The network is QGIS_Roads, start... - 10:29 PM Revision 3405bc15 (qgis): Fix broken export of DXF labels
- 10:29 PM Revision 8cf9f8fb (qgis): Fix combining extent of valid rectangle with invalid rectangle results
- in invalid rectangle
- 10:29 PM Revision 4143ab6e (qgis): Fix DXF export issue when an empty layer is selected
- 09:15 PM Revision 8f1021c5 (qgis): Disable WMS server test
- 06:18 PM Bug report #17494 (Closed): v.clean and v.clean advanced tools return cleaned layers with CRSs ot...
- duplicate of #10137
- 06:18 PM Bug report #17494 (Closed): v.clean and v.clean advanced tools return cleaned layers with CRSs ot...
- duplicate of #10137
- 01:11 PM Bug report #17494 (Closed): v.clean and v.clean advanced tools return cleaned layers with CRSs ot...
- When I apply the v.clean and v.clean advanced tools to layers with CRS EPSG 31983 I have obtained layers with CRS oth...
- 01:56 PM Bug report #17473: QGIS stuck reloading loop
- David Jordan wrote:
> Giovanni Manghi wrote:
> > Just tested on the latests master (osgeo4w) and can't replicate.
... - 09:06 AM Bug report #17473 (Closed): QGIS stuck reloading loop
- 02:19 AM Bug report #17473: QGIS stuck reloading loop
- Giovanni Manghi wrote:
> Just tested on the latests master (osgeo4w) and can't replicate.
I deactivated plugins o... - 02:19 AM Bug report #17473: QGIS stuck reloading loop
- Giovanni Manghi wrote:
> Just tested on the latests master (osgeo4w) and can't replicate.
I deactivated plugins o... - 11:49 AM Bug report #17448: 'Raster' menu split in two in some locales
- More weird things:
- All the submenus under the second "Raster" menu ("Analysis", "Projections", "Miscellaneous", "E... - 09:09 AM Bug report #17458: QGIS freezes when naming a style rule
- Mathieu Bossaert wrote:
> Giovanni Manghi wrote:
> > Please attach a sample project with sample data to allow us tr... - 08:19 AM Revision 6c4a8a24 (qgis): Update WFS tests
- 07:42 AM Revision 6508a5d3 (qgis): Modernise code
- 07:28 AM Revision 7cd8e38c (qgis): Fix unnecessarily fussy close() for QgsMsSqlFeatureIterator
- 07:27 AM Revision 6f3ebdee (qgis): Safer iterator closing, by always calling ::close() instead of
- directly manipulating mClosed
Fixes a crash in the memory data provider (also likely fixes
issues in other providers) - 07:20 AM Revision d6eb8ecc (qgis): Add a bit of tolerance to WFS provider test
- Was failing on Fedora 27
- 07:17 AM Revision 705416c4 (qgis): More consistent exception throwing in QgsCoordinateTransform::transform...
- Depending on the os and proj versions, we weren't always getting an
exception when a bad bounding box transform was m...
2017-11-18
- 11:59 PM Revision 957cf652 (qgis): Add some more provider tests for feature count when subset string is ad...
- 11:58 PM Revision e9e7efc6 (qgis): Fix incorrect extents returned by memory provider when subset string set
- 11:56 PM Revision 1cfd6ee8 (qgis): Add provider test to ensure that extent is correctly calculated
- for layers with 1 point and also no features
The first scenario should return an 'empty' rectangle with x/y
min/max ... - 09:12 PM Revision 62bd3776 (qgis): Allow better resizing of Projection selector widget tree
- 08:21 PM Bug report #17473: QGIS stuck reloading loop
- Just tested on the latests master (osgeo4w) and can't replicate.
- 01:45 AM Bug report #17473: QGIS stuck reloading loop
- Hi Giovanni,
Here's my project file and raster data, the file is rather large so I shared it via dropbox. The iss... - 01:45 AM Bug report #17473: QGIS stuck reloading loop
- Hi Giovanni,
Here's my project file and raster data, the file is rather large so I shared it via dropbox. The iss... - 06:59 PM Bug report #16025: [macOS] Control feature rendering order will crash QGIS
- I can confirm this bug (crashing when "control feature rendering order" is activated) also for Mac OS High Sierra (10...
- 06:52 PM Revision dd378a58 (qgis): Tweak some dialog titles
- 06:51 PM Revision f699e35c (qgis): Add more translatable strings
- 06:43 PM Bug report #17493 (Open): QGIS 3D uses a lot of CPU even when idle
- As soon as I open a 3D window, my fans in the computer winds up. Even if i do nothing more, they stay on, and CPU loa...
- 02:08 PM Revision ecde835a (qgis): Ask confirmation before removing a map theme
- 01:25 PM Revision 7aab0c75 (qgis): Remove unused code
- 01:21 PM Revision c2a940a0 (qgis): [Geometry Checker] Use a more readable file format list
- 12:03 PM Bug report #17492 (Rejected): QGIS master: action names do not show
- Actions do not appear in the Actions menu
see screenshot - 11:48 AM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Tested and working again \o/
Thanks people! - 11:38 AM Bug report #17491 (Closed): QGIS maste: map tips too many quotes are added when insterting an att...
- I noticed that it inserts too many quotes
in QGIS 2.18 works fine - 08:30 AM Bug report #17490 (Closed): Confirmation dialog for save / rollback / cancel all layers changes n...
- In 2.18 and earlier editions of Qgis when one of the save/rollback/cancel options is clicked there is a confirmation ...
- 08:15 AM Revision 33e939c2 (qgis): Merge pull request #5642 from NaturalGIS/2_18_grass74_support
- [processing] add GRASS74 support
- 02:01 AM Revision af6b4cc7 (qgis): Merge pull request #5671 from tomkralidis/issue-17347
- [bugfix] [MetaSearch] fix Esri ArcGIS service chaining (fixes #17347)
2017-11-17
- 10:27 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Added fixes for Esri services. WCS continues to work accordingly.
- 07:12 PM Bug report #17347 (Closed): MetaSearch: Add WMS/WMTS data button broken
- Applied in changeset commit:qgis|1b79177bc95be0afdb3369fd3befa2747e5d5963.
- 07:12 PM Bug report #17347 (Closed): MetaSearch: Add WMS/WMTS data button broken
- Applied in changeset commit:qgis|1b79177bc95be0afdb3369fd3befa2747e5d5963.
- 05:36 PM Bug report #17347 (In Progress): MetaSearch: Add WMS/WMTS data button broken
- 05:36 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- https://github.com/qgis/QGIS/pull/5669
- 05:36 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- https://github.com/qgis/QGIS/pull/5669
- 04:29 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Let me have a deeper look ...
- 10:24 PM Revision 3ea8b74e (qgis): [bugfix] [MetaSearch] fix Esri ArcGIS service chaining (fixes #17347)
- 07:12 PM Revision 1dab575b (qgis): Merge pull request #5669 from elpaso/bugfix-17347-metasearch
- [bugfix] MetaSearch: Add WMS/WMTS data button broken
- 06:45 PM Revision 7cc73751 (qgis): Fedora 26 now provides Qt 5.9, enable 3D in rpm spec for it
- 06:24 PM Bug report #17448: 'Raster' menu split in two in some locales
- > "Settings --> Options --> Processing --> Reset to default" doesn't solve the problem.
I gave it a try (and it se... - 06:09 PM Bug report #17458: QGIS freezes when naming a style rule
- Giovanni Manghi wrote:
> Please attach a sample project with sample data to allow us try replicate here (I cannot re... - 06:07 PM Bug report #17489 (Closed): [Data Source Manager] Click the Test button in the virtual layer tab ...
- Open the Data source Manager --> Virtual layer tab
Click the Test button (I know, it doesn't make sense but...)
kab... - 05:35 PM Revision 1b79177b (qgis): [bugfix] Fix WFS in metasearch
- Fixes #17347
- 04:52 PM Revision a0639b1a (qgis): [bugfix] Fix WMS in metasearch
- 04:45 PM Bug report #16339: Embedded layer style and labels properties can be modified within the layer st...
- This still does not work in master commit:c321700ada
Btw, i think the priority should be raised to High as this bug ... - 02:46 PM Revision 1989111f (qgis): Merge pull request #5664 from rldhont/server-getfeatureinfo-raster-display
- [BUGFIX][Server] GetFeaturInfo: do not identify raster data if point …
- 02:40 PM Bug report #17488 (Closed): Processing Modeler: Defective GUI
- In Processing Modeler, the GUI of the Inputs and Algorithms panels is defective. (Does not resize correctly.) See scr...
- 02:26 PM Bug report #17487 (Open): rotate labels tool does not work properly when canvas is rotated
- The rotate labels tool does not care about the rotation of the canvas.
If the canvas is rotated the area where you h... - 01:07 PM Bug report #17486 (Closed): Help button does not work in its default implementation (returns a wr...
- This is likely a QGIS-Documentation repo issue but more a dev issue than a doc writer's. And given that this is the p...
- 12:10 PM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server
- Hi Richard,
thank you for your analysis. This is indeed commercial software provided by Luciad; I am an employee o... - 11:17 AM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server
Hi Robin,
checking this: the describeFeature response for:
http://demo.luciad.com:8080/LuciadLightspeedOGC/wf...- 12:08 PM Bug report #17485 (Closed): Rendering no longer updated after few saved edits
- Not sure when exactly it happens, but in my current project I'm using GeometryGenerator symbology.
At some random ... - 12:04 PM Bug report #17484 (Feedback): Docked attribute table - not remembering position
- QGis does not remember position of the attribute table (docked to right)
- 11:53 AM Bug report #17483 (Closed): In the modeller: AttributeError: 'QgsProcessingAlgorithm' object has ...
- When I click the `help` button in an algorithm in the modeler, I have a Python exception:
```
AttributeError: 'QgsP... - 10:54 AM Feature request #17482 (Open): Add support for PostgreSQL JSON and JSONB column types
- These types are here since PG 9.4 and gain more and more usage recently.
Supporting them will be a great enhancement... - 08:20 AM Bug report #17481: 2.18.14 crashes if opening a project from a read only network share.
- No. crash on 2.18.13 on Xubuntu 17.04
- 08:13 AM Bug report #17481: 2.18.14 crashes if opening a project from a read only network share.
- No crash on 2.14.18
- 08:04 AM Bug report #17481: 2.18.14 crashes if opening a project from a read only network share.
- I have now checked and found the share I am using is NOT read only and therefore the error messages I am getting appe...
- 04:35 AM Bug report #17481 (Closed): 2.18.14 crashes if opening a project from a read only network share.
- I use sometimes read only file shares to protect a project which was created in a different version from being accide...
2017-11-16
- 11:39 PM Bug report #17480 (Closed): QGIS freez when naming a style rule
- duplicate of #17458
- 11:39 PM Bug report #17480 (Closed): QGIS freez when naming a style rule
- duplicate of #17458
- 11:37 PM Bug report #17480 (Closed): QGIS freez when naming a style rule
- Good morning,
when I try to edit the name of a rule in the "rule based style" editor, QGIS freeze and I have no ot... - 07:11 PM Revision 48c320be (qgis): Merge pull request #5649 from rouault/settings_main_canvas_preview_jobs
- Add a setting to be able to disable preview jobs in main canvas
- 06:52 PM Revision d590e98c (qgis): Merge pull request #5644 from boundlessgeo/bd-2648-auth-thread-safety
- [auth] Thread safe auth methods with recursive mutex
- 06:43 PM Revision adc408f8 (qgis): tooltip of relationstrength in project properties
- improvement of the tooltip. more info, how to activate the duplicate button.
- 05:08 PM Revision 861987da (qgis): [BUGFIX][Server] GetFeaturInfo: do not identify raster data if point no...
- Manual forwardporting with enhancement for raster data values displayed
- 04:58 PM Bug report #17478: Created composer title in Composer Manager empty
- David Signer wrote:
> Assigned myself to solve this. Just added it here, that no parallel work is done on it...
O... - 04:56 PM Bug report #17478: Created composer title in Composer Manager empty
- Assigned myself to solve this. Just added it here, that no parallel work is done on it...
- 03:12 PM Bug report #17478 (Open): Created composer title in Composer Manager empty
- 03:11 PM Bug report #17478: Created composer title in Composer Manager empty
- David Signer wrote:
> Giovanni Manghi wrote:
> > This is just in master, correct?
>
> yes
- 03:10 PM Bug report #17478: Created composer title in Composer Manager empty
- Giovanni Manghi wrote:
> This is just in master, correct?
yes - 03:09 PM Bug report #17478 (Feedback): Created composer title in Composer Manager empty
- This is just in master, correct?
- 03:09 PM Bug report #17478 (Feedback): Created composer title in Composer Manager empty
- This is just in master, correct?
- 03:09 PM Bug report #17478 (Feedback): Created composer title in Composer Manager empty
- This is just in master, correct?
- 03:06 PM Bug report #17478 (Closed): Created composer title in Composer Manager empty
- When creating a composer title it's empty. You have to rename it by double click to the empty space.
Same problem wi... - 04:47 PM Bug report #17479 (Closed): WMS provider not picking up Geoserver tilesets
- QGIS WMS provider picks up the tilesets from http://haitidata.org/geoserver/gwc/service/wms?SERVICE=WMS&VERSION=1.1.1...
- 04:01 PM Revision 6f065974 (qgis): [auth] Morph the mutex from a pointer to a member var
- 04:01 PM Revision 674467b9 (qgis): [auth] Thread safe auth methods with recursive mutex
- Add a mutex to the base class and use that
mutex to protect all public methods of the
authentication methods. - 02:36 PM Revision de9d0b87 (qgis): Merge pull request #5548 from rldhont/release-2_18-server-getfeatureinf...
- Release 2-18 server getfeatureinfo raster display
- 01:06 PM Revision 29c8f7ce (qgis): Merge pull request #5641 from NaturalGIS/master
- [processing] add support for GRASS 7.4
- 12:23 PM Bug report #17382: QGIS can't start with scipy > 0.17
- Same for me on Ubuntu 17.04
- 12:19 PM Bug report #17477 (Closed): Log message panel disappears
- I have case where I want to use use both python console and log message console.
Each time after visiting log messag... - 12:01 PM Revision 7c08b715 (qgis): [Bugfix]Fix Bookmarks xmax and ymin columns inversion (#5643)
- (fix #16987)
- 12:01 PM Bug report #16987 (Closed): a newly created bookmark (via New Bookmark button) has the wrong extent
- Applied in changeset commit:qgis|7c08b7155b3b6f0375a1cccd0d10d31c18b72de6.
- 12:01 PM Bug report #16987 (Closed): a newly created bookmark (via New Bookmark button) has the wrong extent
- Applied in changeset commit:qgis|7c08b7155b3b6f0375a1cccd0d10d31c18b72de6.
- 11:50 AM Revision 99500315 (qgis): member variable for constraint result visability
- ...as we had it for for constraint result (status).
now the setter are called when setting the editable mode changes.... - 11:46 AM Revision 793fb611 (qgis): [processing] add vertex id details to extract nodes algorithms
- 11:46 AM Revision ee8ef42c (qgis): [processing] boolean fieds support in the Refactor Fields algorithm (fi...
- 11:45 AM Bug report #17168 (Closed): Boolean columns trigger Python errors in Refactor Fields processing a...
- Applied in changeset commit:qgis|ee8ef42c42146c357e6e7bdb820d84b6ec4ecea5.
- 11:45 AM Bug report #17168 (Closed): Boolean columns trigger Python errors in Refactor Fields processing a...
- Applied in changeset commit:qgis|ee8ef42c42146c357e6e7bdb820d84b6ec4ecea5.
- 11:43 AM Bug report #17476: QGIS master: update SQL layer error if name contains uppercase chars
- PR: https://github.com/qgis/QGIS/pull/5659
- 11:18 AM Bug report #17476 (Closed): QGIS master: update SQL layer error if name contains uppercase chars
- by uploading a postgis vector, in QGIS 2.99, named with Shift characters, if I update SQL layers get an error.
met... - 11:33 AM Revision 87dbb884 (qgis): truncate only last extension in oper recent project menu
- cherry-picked from 7c9cc07e
- 11:14 AM Bug report #17473 (Feedback): QGIS stuck reloading loop
- Please attach a sample project and data to allow us replicate the issue locally. Thanks!
- 11:14 AM Bug report #17473 (Feedback): QGIS stuck reloading loop
- Please attach a sample project and data to allow us replicate the issue locally. Thanks!
- 11:14 AM Bug report #17473 (Feedback): QGIS stuck reloading loop
- Please attach a sample project and data to allow us replicate the issue locally. Thanks!
- 11:13 AM Revision 574c9f21 (qgis): select the new features after duplication
- when duplicating features with the default action "duplicate" the new features are selected and additionally the chil...
- 11:13 AM Revision 78eba9ed (qgis): return ids of the new child features on duplication
- when duplicating a feature in QgsVectorLayerUtils::duplicateFeature and this feature has over a relation the child fe...
- 11:06 AM Revision 2c034d67 (qgis): [processing] fix batch execution when alg has ParameterPoint
- 11:03 AM Bug report #17475: QGIS 2.99 Shortest Path not showing shortest route
- Right, it's not a plugin anymore.
Your problem looks like some line ends within the unregarded shortcuts still don... - 10:33 AM Bug report #17475: QGIS 2.99 Shortest Path not showing shortest route
- Are you using master? Afaict, shortest Path (roadgraph?) is no longer a plugin; it's a processing alg now. (just to s...
- 06:42 AM Bug report #17475 (Closed): QGIS 2.99 Shortest Path not showing shortest route
- Hi there,
I have been using the Shortest path plugin to get the shortest route between a set of points, along a ro... - 10:48 AM Revision 7c9cc07e (qgis): truncate only last extension in oper recent project menu
- 10:36 AM Revision 898eb4ab (qgis): Merge pull request #5628 from pblottiere/bugfix-transaction-tuple
- executeSql in transaction does not return an error on tuple
- 10:27 AM Revision a6e2ff98 (qgis): [QgsAuthManager] Protect all methods that do SQL queries with mutex (fi...
- 10:24 AM Revision 15c32c22 (qgis): Merge pull request #5566 from pblottiere/bugfix-ogc-getcapa-abstract
- [server][bugfix] Fix OGC test recommendations
- 09:40 AM Revision 9283b267 (qgis): Update tests
- 09:04 AM Revision 7b490325 (qgis): Update for loop
- 09:04 AM Revision 0a38003b (qgis): Keep name and add metadata and keywordlist for root layer
- 09:04 AM Revision f9c80f32 (qgis): Replace Name entry by Abstract in GetCapabilities for root layer
- 09:04 AM Revision f52300d3 (qgis): Update tests
- 09:04 AM Revision dfc03054 (qgis): Merge pull request #5631 from boundlessgeo/bd-2437-certs-format-sniffing
- [auth] Moved the PEM/DER sniffing to a common private function
- 09:01 AM Revision c6b054ed (qgis): Add test
- 09:01 AM Revision 640f78e5 (qgis): Do not consider a tuple response as an error in transaction
- 09:01 AM Revision 51d156d3 (qgis): Update doc
- 09:00 AM Revision 8dd70c1d (qgis): Merge pull request #5526 from boundlessgeo/ogr_authconfig_2
- [auth][needs-docs] Authentication configuration support in OGR provider
- 08:59 AM Revision 0bd5107e (qgis): Merge pull request #5647 from pblottiere/contributor
- Update contributors
- 08:13 AM Revision 05d38b3d (qgis): [processing] preserve field length and precision for temporary outputs ...
- * add test case to cover length and precision through uri
- 07:57 AM Revision bb6fda6c (qgis): Bump minimum spatialite version to 4.2
- 05:40 AM Bug report #16319 (Closed): DXF Export generates many numbered layers (1 layer for each feature)
- This was fixed in recent 2.18 versions
- 05:40 AM Bug report #16319 (Closed): DXF Export generates many numbered layers (1 layer for each feature)
- This was fixed in recent 2.18 versions
- 05:40 AM Bug report #16319 (Closed): DXF Export generates many numbered layers (1 layer for each feature)
- This was fixed in recent 2.18 versions
- 05:04 AM Revision 3fd32b42 (qgis): Update recent project menu upon pin/unpin/remove actions
- 05:04 AM Revision 4420eba6 (qgis): Save non-pinned recent projects below pinned ones
- 04:46 AM Revision cfb78a14 (qgis): Improved mActionDataSourceManager.svg icon (#5618)
- 04:38 AM Revision d0c2a41c (qgis): Fix error when running postgis algs
- 03:30 AM Revision 72af1a00 (qgis): [auth][ogr] Add missing PyQGIS auth manager OGR test
2017-11-15
- 12:27 AM Revision ca8d82ff (qgis): Add a setting to be able to disable preview jobs in main canvas
- Can be used by power users to disable preview jobs, for very slow datasources
(especially when network bandwidth is s... - 11:31 PM Revision ef7cc49c (qgis): Don't require a connection to a geopackage for data item
- 'create new layer' to function
- 11:31 PM Revision 135b5c6c (qgis): Nicer UX when adding a layer to an existing gpkg through the browser
- 11:23 PM Revision 581d0d30 (qgis): [Spatialite provider] Properly destroy QgsSpatiaLiteConnPool singleton ...
- 11:23 PM Bug report #17447 (Closed): [Travis] Crash in PyQgsServerWMS
- Applied in changeset commit:qgis|581d0d30ca89a213b1ba1a56a3fe2af5c896eacd.
- 11:23 PM Bug report #17447 (Closed): [Travis] Crash in PyQgsServerWMS
- Applied in changeset commit:qgis|581d0d30ca89a213b1ba1a56a3fe2af5c896eacd.
- 10:35 PM Bug report #17447: [Travis] Crash in PyQgsServerWMS
- Even more occurences today:
https://travis-ci.org/qgis/QGIS/builds/302565464
https://travis-ci.org/qgis/QGIS/builds... - 10:21 PM Revision 7fa11c82 (qgis): Merge pull request #5632 from rouault/gdal_shared_instance
- [GDAL provider] Use same underlying GDAL dataset for clone() (fixes #16006)
- 10:21 PM Bug report #16006 (Closed): Inefficient use of GDAL block cache during raster rendering
- Applied in changeset commit:qgis|3b2b98b012fdfda14761914f01318d079aeaa409.
- 10:21 PM Bug report #16006 (Closed): Inefficient use of GDAL block cache during raster rendering
- Applied in changeset commit:qgis|3b2b98b012fdfda14761914f01318d079aeaa409.
- 10:17 PM Bug report #16987: a newly created bookmark (via New Bookmark button) has the wrong extent
- see https://github.com/qgis/QGIS/pull/5643
- 10:01 PM Revision 31299b0c (qgis): Merge pull request #5646 from rouault/fix_16966
- [QgsAuthManager] Protect all methods that do SQL queries with mutex (fixes #16966)
- 10:01 PM Bug report #16966 (Closed): QGIS 2.99 (3.0) crashes WMTS-Map Zoom-In
- Applied in changeset commit:qgis|4ce1752157e5d43874117d22d7aeb85303c40098.
- 10:01 PM Bug report #16966 (Closed): QGIS 2.99 (3.0) crashes WMTS-Map Zoom-In
- Applied in changeset commit:qgis|4ce1752157e5d43874117d22d7aeb85303c40098.
- 09:23 PM Bug report #16966: QGIS 2.99 (3.0) crashes WMTS-Map Zoom-In
- https://github.com/qgis/QGIS/pull/5646 submitted
- 12:05 PM Bug report #16966: QGIS 2.99 (3.0) crashes WMTS-Map Zoom-In
- Confirmed here! Just wanted to create a ticket for it when I found this one.
(EDIT): note that this is on Debian T... - 09:57 PM Feature request #17474 (Open): when opening qgis by clicking gpkg -> open with qgis use projectin...
- The qgpkg extension allows to store project data (context/styling) as part of a geopackage, people may want to click ...
- 09:54 PM Bug report #17467: Function $area
- Now I understand. Thank you very much!
Best wishes, Thomas - 11:05 AM Bug report #17467 (Closed): Function $area
- The point is that in project 2 you have OTFR enabled and set an ellipsoid (wgs84) for measurements (in project proper...
- 11:05 AM Bug report #17467 (Closed): Function $area
- The point is that in project 2 you have OTFR enabled and set an ellipsoid (wgs84) for measurements (in project proper...
- 11:05 AM Bug report #17467 (Closed): Function $area
- The point is that in project 2 you have OTFR enabled and set an ellipsoid (wgs84) for measurements (in project proper...
- 11:05 AM Bug report #17467 (Closed): Function $area
- The point is that in project 2 you have OTFR enabled and set an ellipsoid (wgs84) for measurements (in project proper...
- 09:53 AM Bug report #17467 (Closed): Function $area
- The function $area (field calculator) does not deliver reliable values in every case.
I have attached two example p... - 09:50 PM Bug report #17473 (Closed): QGIS stuck reloading loop
- I have Lidar topography of Mount Shasta in QGIS; topography, hillshade and a slope map (all in EPSG 3488 projection)....
- 09:44 PM Revision 5e2564cf (qgis): Update contributors
- 09:30 PM Revision bc90210e (qgis): Merge pull request #5620 from pblottiere/bugfix_gpkg_bool
- [bugfix] Fixes #17070 by considering bool fields as OGR integer fields with boolean subtype
- 09:30 PM Bug report #17070 (Closed): saving a layer with boolean fields fails
- Applied in changeset commit:qgis|3bbe71d99e0678dd11be720f1ed0f6d4c589efa6.
- 09:30 PM Bug report #17070 (Closed): saving a layer with boolean fields fails
- Applied in changeset commit:qgis|3bbe71d99e0678dd11be720f1ed0f6d4c589efa6.
- 09:29 PM Bug report #17472: Clicking the "In Project" checkbox in Bookmarks panel corrupts the bookmarks list
- see also #17004, #16987
- 05:40 PM Bug report #17472 (Closed): Clicking the "In Project" checkbox in Bookmarks panel corrupts the bo...
- see the attached image.
I ended up with this by clicking the ckeckbox in the "In Project" column from the bookmarks ... - 09:21 PM Revision 4ce17521 (qgis): [QgsAuthManager] Protect all methods that do SQL queries with mutex (fi...
- 09:19 PM Bug report #17455: vector layer properties: Wrong CRS reported in the Informations and Metadata tabs
- There is a separate setting for CRS in the Metadata tab, in the Extents tab on the right-hand side of the dialog. Thi...
- 06:51 PM Revision a00ce9e1 (qgis): Rename editCopy/editPaste to copySelectionToClipboard/pasteFromClipboard
- 06:38 PM Bug report #16506 (Closed): DB Manager fails to dispay tables without PK
- Fixed in changeset commit:f1c3692f6adfe8316c2ade7508f28fbe26407286
- 06:38 PM Bug report #16506 (Closed): DB Manager fails to dispay tables without PK
- Fixed in changeset commit:f1c3692f6adfe8316c2ade7508f28fbe26407286
- 06:26 PM Revision f1c3692f (qgis): [dbmanager] Fixes #16533 and #16506
- 06:26 PM Bug report #16533 (Closed): python error on DB manager on QGIS master (qgis 3)
- Applied in changeset commit:qgis|f1c3692f6adfe8316c2ade7508f28fbe26407286.
- 06:26 PM Bug report #16533 (Closed): python error on DB manager on QGIS master (qgis 3)
- Applied in changeset commit:qgis|f1c3692f6adfe8316c2ade7508f28fbe26407286.
- 06:08 PM Revision 670764d1 (qgis): [GDAL provider] Improve UI responsiveness affected by 3b2b98b012fdfda14...
- The consequence of sharing the same GDAL object and protecting them under mutex is that
instanciating a new pipeline ... - 05:20 PM Revision 9f0985ff (qgis): Merge pull request #5554 from pblottiere/bugfix_virtuallayer
- [bugfix] Fixes #16798 FilterFid feature requests with virtual layers
- 05:20 PM Bug report #16798 (Closed): Virtual layers don't work correctly with FilterFid feature requests
- Applied in changeset commit:qgis|d0d88e440a7c847953b49004b6725f90276dc7e3.
- 05:20 PM Bug report #16798 (Closed): Virtual layers don't work correctly with FilterFid feature requests
- Applied in changeset commit:qgis|d0d88e440a7c847953b49004b6725f90276dc7e3.
- 05:18 PM Revision bd30e12c (qgis): Merge pull request #5597 from pblottiere/bugfix-clickxy
- [bugfix] Fixes #16852 by adding click_x and click_y variables to resolve actions
- 05:18 PM Bug report #16852 (Closed): layer actions triggered from identify + right click do not have varia...
- Applied in changeset commit:qgis|c9c1c34952ed1aa158448e24d5eddb671f9c0cee.
- 05:18 PM Bug report #16852 (Closed): layer actions triggered from identify + right click do not have varia...
- Applied in changeset commit:qgis|c9c1c34952ed1aa158448e24d5eddb671f9c0cee.
- 05:15 PM Revision cb566178 (qgis): Add boolean support in OGR provider
- 05:15 PM Revision 6465af3f (qgis): Call OGR_Fld_SetSubType before OGR_L_CreateField
- 05:15 PM Revision caf0cf75 (qgis): Add test
- 05:15 PM Revision 3bbe71d9 (qgis): Fixes #17070 by considering bool fields as OGR integer fields with bool...
- 05:15 PM Revision 76635894 (qgis): Update test with Bool type instead of Int type
- 04:46 PM Bug report #17471 (Closed): Processing: in GRASS/QGIS 3 inputs parameters (even optional) are alw...
- steps to replicate (is just an example):
* load a dem layer
* open the r.watershed tool, no input is filled, no... - 04:39 PM Bug report #17470 (Closed): Editing Z / M value in scratch layer using node tool triggers a cras...
- following up all attempts to consolidate Z editing,
we now have scratch layer correctly initialized using Z/M optio... - 03:52 PM Revision c56e29ef (qgis): add GRASS74 support in QGIS 2.18
- 03:46 PM Revision db5b1df7 (qgis): Remove direct usage of sqlite3 handles in core
- 03:39 PM Revision 618ada7f (qgis): add support for GRASS 7.4
- 03:30 PM Revision 042f2cd3 (qgis): Increase git depth to avoid issues in code layout build
- On Travis
When on large pr with many commits - 03:26 PM Revision 829915e3 (qgis): Make names from QgisApp and QgisInterface match
- 03:02 PM Bug report #17457 (Closed): QGIS freezes when removing joined data
- Thorvald S wrote:
> Tested with a small 3 feature point layer, couldn't reproduce.
> Not able to reproduce at the m... - 03:02 PM Bug report #17457 (Closed): QGIS freezes when removing joined data
- Thorvald S wrote:
> Tested with a small 3 feature point layer, couldn't reproduce.
> Not able to reproduce at the m... - 01:19 PM Bug report #17457: QGIS freezes when removing joined data
- Tested with a small 3 feature point layer, couldn't reproduce.
Not able to reproduce at the moment with my original ... - 11:47 AM Bug report #17457: QGIS freezes when removing joined data
- Thorvald S wrote:
> Yes, but the one I just tested with was a polygon layer.
is difficult for us to get to the bo... - 11:46 AM Bug report #17457: QGIS freezes when removing joined data
- Yes, but the one I just tested with was a polygon layer.
- 11:36 AM Bug report #17457: QGIS freezes when removing joined data
- Thorvald S wrote:
> Followed this guide, tested with the attached data sets (no csvt file though): http://www.qgistu... - 11:34 AM Bug report #17457: QGIS freezes when removing joined data
- Followed this guide, tested with the attached data sets (no csvt file though): http://www.qgistutorials.com/en/docs/p...
- 02:51 PM Bug report #17450: values for cached join fields randomely become null when dragging canvas
- PR proposed here [[https://github.com/qgis/QGIS/pull/5638]]
- 01:17 PM Revision fbe5a17a (qgis): Merge pull request #2586 from nyalldawson/coordinate_formatter
- Initial implementation of QgsCoordinateFormatter
- 01:09 PM Revision fba8e84e (qgis): Group conditions
- 01:09 PM Revision 74e3323d (qgis): Never return a feature if the fid is negative
- 01:09 PM Revision f25ea5b6 (qgis): Add some tests with cross join
- 01:09 PM Revision d0d88e44 (qgis): Fixes #16798 FilterFid feature requests with virtual layers
- 01:09 PM Revision b5317c57 (qgis): Fix test
- 01:09 PM Revision de9bd1a1 (qgis): Use QString::number
- 12:55 PM Bug report #17469 (Closed): Constraint result still displayed in non editable mode
- Only show constraint result indicators when form is in editable mode. Constraint results are the ticks/crosses that c...
- 12:31 PM Bug report #15930: Aggregate functions don't seem to work with virtual fields
- jd lom wrote:
> Frank Broniewski wrote:
> > Is the fix already implemented in 2.18.14? I am having this issue too, ... - 12:26 PM Revision b02133f8 (qgis): Use id in gui if name is empty and crop layerid-part in the generated id
- The name can be empty, so use the id instead in the combo box. To avoid so long ids, the part taken from the layerid ...
- 12:26 PM Revision a49ed097 (qgis): Autogenerated relation names in dialog instead of ids
- The autogenerated ids are quite long and this leads that they where very unconfortable to use in the configuration of...
- 12:19 PM Revision ac574e23 (qgis): Fix build
- 11:51 AM Revision 75885d70 (qgis): Rename various WKT/WKB/GeoJSON/GML methods for consistency
- and consistent capitalisation
- 11:51 AM Revision 3734a0d6 (qgis): Fix tests
- 11:49 AM Revision 95765a19 (qgis): Remove coordinate formatting methods from QgsPointXY
- Use QgsCoordinateFormatter instead
- 11:49 AM Revision 0d7b828b (qgis): Update code, formatting
- 11:49 AM Revision 916c56b9 (qgis): Initial implementation of QgsCoordinateFormatter
- 11:49 AM Revision 8fd8b6eb (qgis): Update sip bindings
- 11:13 AM Revision 80ad1632 (qgis): [Geometry checker] Remove unused include
- 11:00 AM Revision 2a8ea5dc (qgis): [auth] Simplify code and add a *.* filter for certs and keys selection
- 10:57 AM Revision 0c2e226e (qgis): Merge pull request #5633 from slarosa/fix_17466
- Fixes #17466: DB Manager does not refresh correctly map in layer preview
- 10:56 AM Bug report #17466 (Closed): DB Manager does not refresh correctly map in layer preview
- Applied in changeset commit:qgis|5d8963a4a82436bfc4305625eefa1ba302eb4e9c.
- 10:56 AM Bug report #17466 (Closed): DB Manager does not refresh correctly map in layer preview
- Applied in changeset commit:qgis|5d8963a4a82436bfc4305625eefa1ba302eb4e9c.
- 10:55 AM Revision 364ddc1d (qgis): Fix #17444 : GeoNode data provider completely ignores authentication (#...
- * Fix #17444 : GeoNode data provider completely ignores authentication - hide the authentication group until GeoNode ...
- 10:55 AM Bug report #17444 (Closed): GeoNode data provider completely ignores authentication
- Applied in changeset commit:qgis|364ddc1de462b6ebca9903b896d4cc492b929cb3.
- 10:55 AM Bug report #17444 (Closed): GeoNode data provider completely ignores authentication
- Applied in changeset commit:qgis|364ddc1de462b6ebca9903b896d4cc492b929cb3.
- 10:26 AM Revision 6d015435 (qgis): Fix missing toolbar tooltips
- 10:23 AM Bug report #17468 (Closed): Processing: "export/add geometry columns" corrupts data
- Using QGIS 2.18, saving the result of "export/add geometry columns" into an existing shapefile deletes the prj, qpj a...
- 08:51 AM Revision 2b6d1f88 (qgis): Move spatialite context management to deleter
- 08:51 AM Revision 124f3df1 (qgis): Use member functions over sqlite3 api
- 08:51 AM Revision 716ed6b7 (qgis): Prevent memory leaks
- 08:51 AM Revision 447cd18a (qgis): Improve chances for copy elision
- 08:51 AM Revision 4d20a395 (qgis): Avoid recreating spatialite handles
- 08:51 AM Revision 43329f50 (qgis): Const correctness for sqlite_database_unique_ptr
- 08:51 AM Revision c5667db9 (qgis): Switch geopackage dataitem to RAII sqlite3
- 08:51 AM Revision a58ff723 (qgis): Switch QgsStyle to RAII sqlite3
- 08:51 AM Revision cf1ace89 (qgis): Switch map layer to RAII sqlite3
- 08:51 AM Revision c713878a (qgis): Switch new spatialite layer dialog to RAII spatialite
- 08:51 AM Revision 2aed700b (qgis): Release spatialite context when a spatialite_database_unique_ptr scopes...
- 08:51 AM Revision 5c12430b (qgis): Use sq/spatialite unique_ptrs in QgsMapLayer and QgsOfflineEditing
- 08:51 AM Revision 28f13778 (qgis): Switch more places to using spatialite_database_unique_ptr
- 08:51 AM Revision 48e8656f (qgis): Code improvement
- 08:51 AM Revision 35808f19 (qgis): delete spatialite_database_unique_ptr::reset( sqlite3 * )
- 08:51 AM Revision ecd4ee17 (qgis): Destroy spatialite context after closing database
- According to instructions in https://groups.google.com/forum/#!msg/spatialite-users/83SOajOJ2JU/sgi5fuYAVVkJ
- 08:51 AM Revision 4df65aca (qgis): Use std::unique_ptr with custom deleter for spatialite and sqlite
- 08:47 AM Revision 340f7abb (qgis): Merge pull request #5616 from boundlessgeo/datasource-manager-add-close
- [gui] Datasource manager remove Ok and add Close
- 08:30 AM Revision 5a4ace10 (qgis): [dbmanager] defines correctly super class
- 08:24 AM Revision 26e4d4f4 (qgis): correctly create new function file (fix #16752)
- (cherry picked from commit d8398400f989147e8b9c89bf3c4beb87e2f8f97f)
- 07:31 AM Revision b95588cf (qgis): Merge pull request #5603 from medspx/ProcessingGrassFixDescR
- [processing] GRASS7 provider: review and update all r.* description files.
- 05:22 AM Bug report #17325: QGIS 2.99 with Network Analysis Error
- Hi Nyall,
We have been using this and following your instructions.
Sometimes the path takes an indirect route eve... - 01:27 AM Revision 2d188e95 (qgis): processing Union fix
- 01:27 AM Revision c321700a (qgis): [processing] test for union algorithm
- 01:27 AM Revision b0c13da8 (qgis): Fix exception in find projection algorithm
2017-11-14
- 12:14 AM Revision dd15d4ef (qgis): Cleanup layer options arrangement
- 12:14 AM Revision de7b33a3 (qgis): [needs-docs] Remove option to show raster preview icons in layer tree
- This option is not safe - see #16803, and generally undesirable
due to how slow generating the preview icons are - 11:09 PM Bug report #17444: GeoNode data provider completely ignores authentication
- I have added a proposed fix for this here: https://github.com/qgis/QGIS/pull/5634 which hides the auth group box for ...
- 10:46 PM Revision 5d8963a4 (qgis): Fixes #17466: DB Manager does not refresh correctly map in layer preview
- 10:44 PM Bug report #17466 (Closed): DB Manager does not refresh correctly map in layer preview
- switching between layers the map is not updated when preview tab is active.
- 09:03 PM Revision 3b2b98b0 (qgis): [GDAL provider] Use same underlying GDAL dataset for clone() (fixes #16...
- This will improve efficiency of GDAL block cache during raster rendering,
since the cached blocks are only valid duri... - 08:44 PM Revision d4b2895b (qgis): Use id in gui if name is empty and crop layerid-part in the generated id
- The name can be empty, so use the id instead in the combo box. To avoid so long ids, the part taken from the layerid ...
- 08:44 PM Revision ea5ed674 (qgis): Autogenerated relation names in dialog instead of ids
- The autogenerated ids are quite long and this leads that they where very unconfortable to use in the configuration of...
- 08:44 PM Bug report #17443: PROCESSING: Mac OS Grass help path error
- This is related to GRASS installed by Homebrew. The detection code doesn't account for that on the Mac. Homebrew inst...
- 08:44 PM Bug report #17441 (Closed): Autogenerated relation names result in very large dialogs
- Applied in changeset commit:qgis|ea5ed674cb9ef2a3569e582ec96511adfe0711bd.
- 08:44 PM Bug report #17441 (Closed): Autogenerated relation names result in very large dialogs
- Applied in changeset commit:qgis|ea5ed674cb9ef2a3569e582ec96511adfe0711bd.
- 07:07 PM Revision b1eb6c0b (qgis): [auth] Moved the PEM/DER sniffing to a common private function
- 06:54 PM Bug report #16752 (Closed): Function Editor "New File" reset previous functions
- Applied in changeset commit:qgis|d8398400f989147e8b9c89bf3c4beb87e2f8f97f.
- 06:54 PM Bug report #16752 (Closed): Function Editor "New File" reset previous functions
- Applied in changeset commit:qgis|d8398400f989147e8b9c89bf3c4beb87e2f8f97f.
- 06:53 PM Revision d8398400 (qgis): correctly create new function file (fix #16752)
- 06:29 PM Feature request #17465 (Open): Being able to set a title for diagram categories
- Apply a categorized style to a layer.
Then set a pie chart diagram on it.
In the attached image, the Item1 and 2 ... - 06:19 PM Bug report #17448: 'Raster' menu split in two in some locales
- Asier Sarasua wrote:
> "Settings --> Options --> Processing --> Reset to default" doesn't solve the problem.
Weir... - 05:32 PM Bug report #17448: 'Raster' menu split in two in some locales
- Trying other languages, I noticed the issue appears in languages where the string "&Raster" is NOT translated exactly...
- 05:16 PM Bug report #17448: 'Raster' menu split in two in some locales
- "Settings --> Options --> Processing --> Reset to default" doesn't solve the problem.
I noticed another user in Tr... - 11:06 AM Bug report #17448: 'Raster' menu split in two in some locales
- Assuming translation has been well done in "Transifex":http://qgis.org/en/site/getinvolved/translate.html. Note that ...
- 10:57 AM Bug report #17448 (Feedback): 'Raster' menu split in two in some locales
- Asier Sarasua, what happens if in Settings --> Options --> Processing, you click the "Reset to default" button (in fr...
- 09:03 AM Bug report #17448: 'Raster' menu split in two in some locales
- see also #13975
- 09:03 AM Bug report #17448: 'Raster' menu split in two in some locales
- see also #13975
- 05:58 PM Revision 1a17b900 (qgis): Disable PG test
- 05:58 PM Revision dc6101a6 (qgis): [auth] Add tests for Basic auth CAs on OGR and PG
- providers
- 05:58 PM Revision 14df3271 (qgis): [auth][ogr] Added test cases for all supported drivers
- 05:58 PM Revision d163c016 (qgis): [ogr][auth] Add geojson username/password test
- 05:58 PM Revision 276bd1bf (qgis): [auth] Add trusted root CAs to OGR PG connnections
- 05:58 PM Revision 2c636717 (qgis): Always use expanded URI for connection pooling
- 04:55 PM Bug report #17464 (Feedback): Preview in Data-defined size legend dialog doesn't scale symbols si...
- In Vector Layer Properties dialog --> Diagrams, set a pie chart diagram and add your fields
In the Size tab, set a v... - 04:54 PM Bug report #17463 (Feedback): Inconsistent behaviour of the preview frame in Data-defined size le...
- Vector layer properties --> Diagrams --> Rendering --> Legend entries for diagram size (you need to use a compatible ...
- 04:54 PM Bug report #17462 (Feedback): Layer symbology in layer panel behaves weirdly when the legend entr...
- In Vector Layer Properties dialog --> Diagrams, set a pie chart diagram and add your fields
In the Size tab, set a v... - 04:52 PM Bug report #17461 (Feedback): Applying the vector layer properties dialog when diagram legend is ...
- Create a categorized symbology on a layer and expand its symbology in the layer tree (it might be optional but better...
- 03:48 PM Bug report #13255 (Open): Some WFS data not displayed from LuciadLightspeed WFS server
- Services is back online; I renewed the license.
- 03:15 PM Bug report #17460 (Closed): crash when removing layer
- QGIS 2.99
right clic on a layer and left clic to remove it makes qgis crashs.
report :
h2. User Feedback
... - 02:37 PM Bug report #16173: QGIS WFS client not using urls from capabilities document
- For WFS try:
http://environment.data.gov.uk/ds/wfs?SERVICE=WFS&INTERFACE=ENVIRONMENTWFS&VERSION=2.0.0&LC=40000000
... - 02:27 PM Bug report #17458 (Feedback): QGIS freezes when naming a style rule
- Please attach a sample project with sample data to allow us try replicate here (I cannot replicate with data of my ow...
- 12:45 PM Bug report #17458 (Closed): QGIS freezes when naming a style rule
- Good morning,
when I try to edit the name of a rule in the "rule based style" editor, QGIS freeze and I have no ot... - 02:16 PM Bug report #16615 (Closed): QGIS crashes when opening project file with nonexisting NTV2 grid fil...
- 02:13 PM Bug report #16615: QGIS crashes when opening project file with nonexisting NTV2 grid file location
- Even Rouault wrote:
> I cannot reproduce with latest QGIS 2.18.14 or QGIS master on Ubuntu 16.04. If you reproduce, ... - 01:40 PM Bug report #16615 (Feedback): QGIS crashes when opening project file with nonexisting NTV2 grid f...
- I cannot reproduce with latest QGIS 2.18.14 or QGIS master on Ubuntu 16.04. If you reproduce, could you give the stac...
- 01:34 PM Revision eefcb318 (qgis): Raster renderer: fix so that raster in projected CRS is not rendered in...
- 01:30 PM Revision c09c96b0 (qgis): Raster renderer: fix so that raster in projected CRS is not rendered in...
- 01:30 PM Bug report #14229 (Closed): Raster in projected CRS is not rendered in geographic CRS if the exte...
- Applied in changeset commit:qgis|c09c96b03e5ed6bf043145471974eede2e34bb16.
- 01:30 PM Bug report #14229 (Closed): Raster in projected CRS is not rendered in geographic CRS if the exte...
- Applied in changeset commit:qgis|c09c96b03e5ed6bf043145471974eede2e34bb16.
- 01:04 PM Feature request #17459 (Open): Being able to customize layer names based on applied style
- I couldn't find if this had already been requested but it's something i've been looking for a long time...
With the ... - 12:41 PM Revision ec9e87d6 (qgis): Fix compilation error likely due to 5d476e51dfcbf9a2d3634cf6b7a6d5b12e9...
- 12:37 PM Bug report #17451: Plugin Manager truncates Plugin name in Lists
- I don't remember why I implemented the truncation (maybe just to avoid a narrow column with a few items much longer t...
- 12:32 PM Bug report #17451 (Closed): Plugin Manager truncates Plugin name in Lists
- Applied in changeset commit:qgis|5f915a09db20267e2ec3e30cd2bf6c9ba7fcd9b2.
- 12:32 PM Bug report #17451 (Closed): Plugin Manager truncates Plugin name in Lists
- Applied in changeset commit:qgis|5f915a09db20267e2ec3e30cd2bf6c9ba7fcd9b2.
- 10:29 AM Bug report #17451 (Closed): Plugin Manager truncates Plugin name in Lists
- In current Plugin Manager, the names of plugins with (too?) long titles are truncated to 32 chars it seems:
OpenQu... - 12:34 PM Revision 71a4bed9 (qgis): [Plugin manager] Don't truncate long names (#17451). Backport from 3.0.
- 12:33 PM Bug report #17457 (Feedback): QGIS freezes when removing joined data
- Please attach sample project/data. Thanks!
- 12:33 PM Bug report #17457 (Feedback): QGIS freezes when removing joined data
- Please attach sample project/data. Thanks!
- 12:32 PM Bug report #17457 (Closed): QGIS freezes when removing joined data
- QGIS freezes forever (leaved the PC on overnight with sleep disabled, still frozen. Had to force close. Did the same ...
- 12:31 PM Revision 5f915a09 (qgis): [Plugin manager] Don't truncate long names. Fixes #17451.
- 12:15 PM Revision ff683a6e (qgis): [Raster] Do not crash when displaying a raster with complex datatype (f...
- That said, complex datatypes are not handled, so QGIS cannot do anything useful
with such datasets. - 12:09 PM Bug report #16405 (Closed): Segmentation fault in QgsContrastEnhancement::enhanceContrast
- Applied in changeset commit:qgis|b861db47f58b8488966f41232ed0d2a637d93159.
- 12:09 PM Bug report #16405 (Closed): Segmentation fault in QgsContrastEnhancement::enhanceContrast
- Applied in changeset commit:qgis|b861db47f58b8488966f41232ed0d2a637d93159.
- 12:08 PM Revision b861db47 (qgis): [Raster] Do not crash when displaying a raster with complex datatype (f...
- That said, complex datatypes are not handled, so QGIS cannot do anything useful
with such datasets. - 11:55 AM Bug report #17456 (Closed): Memory layer crs seems to not be found by the new metadata tab
- Given two epsg:2154 layers, I generate a memory layer using the clip algorithm. The output layer is also reported as ...
- 11:53 AM Revision 15e15356 (qgis): Show vector layer wkb types in tooltip in layer tree and layer combo boxes
- This is very useful information to have readily visible (esp.
to see if a layer is multi* type, has z/m, when choosin... - 11:53 AM Revision 020972c2 (qgis): Tweaks to automatic layer name logic
- 11:53 AM Revision 6e31fccc (qgis): [needs-docs] Remove option to capitalize layer names, and make it alway...
- Doing this removes some work from our users - giving layers
a nicely generated name by default - 11:53 AM Revision 1e4f6917 (qgis): Cleanup fragile 'capitalize layer names' option
- This option was being applied in the wrong place - within the
map layer classes themselves. This meant that depending... - 11:53 AM Revision 6f55e50a (qgis): Remove QgsMapLayer::originalName()
- Now QgsMapLayer::name() is guaranteed to return the same string
- 11:52 AM Revision d14b8592 (qgis): More efficient distance to vertex calculation in extract nodes alg
- Instead of calculating the whole distance from the start of the
geometry to the vertex for EVERY vertex, we just keep... - 11:52 AM Revision fc6c69be (qgis): Fix calculation of distance to vertex for multi part, multi ring
- and curved geometries
- 11:52 AM Bug report #17424: QGIS always changed spatialite datasource (when closing a project) even when n...
- Thanks for the quick response.
- 11:52 AM Revision 5d476e51 (qgis): Use QVector where possible in geometry classes
- 11:52 AM Revision 507a93c6 (qgis): Drop the cached coordinate sequence from abstract geometries
- This cache was added to speed up expensive QgsAbstractGeometry::coordinateSequence
calls, when we were relying on coo... - 11:46 AM Bug report #17455 (Closed): vector layer properties: Wrong CRS reported in the Informations and M...
- In the Vector Layer Properties, either in the Information tab or Metadata --> Extent one, QGIS reports the layer to b...
- 11:36 AM Feature request #17454 (Open): Simplify the steps to add history to metadata
- Open a vector layer properties dialog --> Meatadata, History
Clicking the + button opens a not that large "line edit... - 11:24 AM Bug report #17453 (Closed): Right-click on QGIS Toolbars no longer shows the drop-down list of pa...
- To enable or disable a toolbar/panel, you could right-click any "empty" place on a toolbar, on the menu bar, on a pan...
- 11:23 AM Feature request #17452 (Open): Set outline style for label background shapes
- For now you can only change color and width of the shape outline.
I guess it's quite easy to add outline style, as a... - 11:19 AM Bug report #10456: composer - impossible to copy & paste multiframe items
- ramon . wrote:
> Its probably worth mentioning that as a work around, you can select the html frame you want, and th... - 11:08 AM Revision 0c35dde4 (qgis): N:M Relations, support for linking table with default values
- 11:08 AM Revision 30eec2b3 (qgis): Update buttons on referenced layer edit state change in N:M
- Fix #16635
- 11:08 AM Revision 3ba22545 (qgis): Fix broken sip casting of nested QVectors
- Old code was always forcing casting to QgsPointXY, regardless
of actual type - 10:56 AM Bug report #15930: Aggregate functions don't seem to work with virtual fields
- Frank Broniewski wrote:
> Is the fix already implemented in 2.18.14? I am having this issue too, the right values on... - 10:41 AM Bug report #15930: Aggregate functions don't seem to work with virtual fields
- Is the fix already implemented in 2.18.14? I am having this issue too, the right values on preview and in fields, but...
- 09:15 AM Bug report #17449 (Feedback): QGIS master does not open after installing on Ubuntu 16.04
- Just installed from the nightly repo on Xenial and it works (c9ee3ef).
- 09:15 AM Bug report #17449 (Feedback): QGIS master does not open after installing on Ubuntu 16.04
- Just installed from the nightly repo on Xenial and it works (c9ee3ef).
- 09:15 AM Bug report #17449 (Feedback): QGIS master does not open after installing on Ubuntu 16.04
- Just installed from the nightly repo on Xenial and it works (c9ee3ef).
- 09:15 AM Bug report #17449 (Feedback): QGIS master does not open after installing on Ubuntu 16.04
- Just installed from the nightly repo on Xenial and it works (c9ee3ef).
- 09:06 AM Bug report #17319 (Closed): v.net category value
- 06:14 AM Bug report #17319: v.net category value
- I also agree, it's not a bug.
It is a confusion of terminology. It is enough for the user to know that Category Numb... - 09:04 AM Bug report #17050: Adding many WFS layers causes "Cannot create temporary SpatiaLite cache"
- Even Rouault wrote:
> According to libspatialite developer, the issue will be solved by packaging recent libspatiali... - 09:03 AM Bug report #17450: values for cached join fields randomely become null when dragging canvas
- Seems also to not happen in 2.18(?).
- 06:35 AM Bug report #17450: values for cached join fields randomely become null when dragging canvas
- Better video, featuring the reduced test project attached.
- 06:32 AM Bug report #17450 (Closed): values for cached join fields randomely become null when dragging canvas
- I've finally been able to reduce this features going missing issue that's been haunting me for a while now.
When ... - 09:03 AM Bug report #13975 (Closed): Lithuanian Raster Menu
- Closed in favor of #17448 as is more general.
- 09:03 AM Bug report #13975 (Closed): Lithuanian Raster Menu
- Closed in favor of #17448 as is more general.
- 07:39 AM Revision 662c2cf8 (qgis): another typo
- 07:38 AM Revision c65ed15d (qgis): Fix typo
- 01:22 AM Revision 857bae4b (qgis): Merge pull request #5609 from nyalldawson/remove_options
- [needs-docs] Remove options for making layer names and groups bold
2017-11-13
- 12:57 AM Bug report #17449 (Closed): QGIS master does not open after installing on Ubuntu 16.04
- After installed Qgis 2.99 it not open and returned me this massage:
qgis
../../src/app/main.cpp: 454: (main) [0ms... - 11:02 PM Revision 3c8d50d5 (qgis): Merge pull request #5612 from nirvn/native_nodes
- Optimize extract nodes algorithm
- 10:14 PM Revision 6dbdbead (qgis): Handle null values in processing attribute tests
- 10:13 PM Bug report #17448 (Closed): 'Raster' menu split in two in some locales
- In some locales (Spanish, Basque, Catalan, Suomi, Magyar...), 'Raster' menu appears twice:
* one in the correct posi... - 10:04 PM Bug report #17424 (Closed): QGIS always changed spatialite datasource (when closing a project) ev...
- Fixed in GDAL trunk https://trac.osgeo.org/gdal/changeset/40702 and GDAL 2.2 branch https://trac.osgeo.org/gdal/chang...
- 10:04 PM Bug report #17424 (Closed): QGIS always changed spatialite datasource (when closing a project) ev...
- Fixed in GDAL trunk https://trac.osgeo.org/gdal/changeset/40702 and GDAL 2.2 branch https://trac.osgeo.org/gdal/chang...
- 10:04 PM Bug report #17424 (Closed): QGIS always changed spatialite datasource (when closing a project) ev...
- Fixed in GDAL trunk https://trac.osgeo.org/gdal/changeset/40702 and GDAL 2.2 branch https://trac.osgeo.org/gdal/chang...
- 09:57 PM Bug report #17050: Adding many WFS layers causes "Cannot create temporary SpatiaLite cache"
- According to libspatialite developer, the issue will be solved by packaging recent libspatialite and GEOS >= 3.5
- 06:32 PM Bug report #17050: Adding many WFS layers causes "Cannot create temporary SpatiaLite cache"
- I've identified this as a libspatialite issue. Basically we are currently limited to SPATIALITE_MAX_CONNECTIONS / 2 =...
- 09:50 PM Bug report #17447 (Closed): [Travis] Crash in PyQgsServerWMS
{{{
----------------------------------------------------------------------
Ran 56 tests in 31.388s
OK
***...- 09:28 PM Bug report #17446 (Closed): QgsVectorFileWriter.writeAsVectorFormat() throws errors
- You probably missed:
"""writeAsVectorFormat() now takes a QgsCoordinateTransform reference, not a pointer. An inva... - 09:28 PM Bug report #17446 (Closed): QgsVectorFileWriter.writeAsVectorFormat() throws errors
- You probably missed:
"""writeAsVectorFormat() now takes a QgsCoordinateTransform reference, not a pointer. An inva... - 06:49 PM Bug report #17446 (Closed): QgsVectorFileWriter.writeAsVectorFormat() throws errors
- I may have missed something, but I checked this https://qgis.org/api/api_break.html and the other tickets and could n...
- 09:23 PM Revision 94fa450e (qgis): [WFS provider] Add NAMESPACES= parameter to GetFeature requests when ne...
- 09:23 PM Bug report #14685 (Closed): Missing namespace declaration in the GetFeature request
- Applied in changeset commit:qgis|94fa450efdf6de2165f2c9c99dfba04c96b1380e.
- 09:23 PM Bug report #14685 (Closed): Missing namespace declaration in the GetFeature request
- Applied in changeset commit:qgis|94fa450efdf6de2165f2c9c99dfba04c96b1380e.
- 08:53 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Heard a special Request from Mr Pasotti :-)
Failing WFS too...
Again: select Netherlands National CSW
Search f... - 05:29 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Here is a standalone example workflow: https://gist.github.com/tomkralidis/dccb49efa760a585be38ee0c3188b8b3
when c... - 05:03 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Changed (locally) with erroneous results per [1].
[1] http://osgeo-org.1560.x6.nabble.com/QGIS-Developer-MetaSearc... - 04:58 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- The 'on_btnConnect_clicked' slot has been renamed to 'btnConnect_clicked'
- 08:52 PM Bug report #17233: QGIS Main Window resizes itself upon saving the project to show the 'successfu...
- I believe I'm experiencing the same issue. Upon saving a project, via either save command via menu or key-command (⌘...
- 06:39 PM Bug report #13255 (Feedback): Some WFS data not displayed from LuciadLightspeed WFS server
- http://demo.luciad.com:8080/LuciadLightspeedOGC/wfs?REQUEST=GetCapabilities&SERVICE=WFS currently returns a "HTTP 500...
- 06:34 PM Bug report #16173 (Feedback): QGIS WFS client not using urls from capabilities document
- Could you point to such a server ?
- 06:34 PM Bug report #16173 (Feedback): QGIS WFS client not using urls from capabilities document
- Could you point to such a server ?
- 06:23 PM Revision f70213f6 (qgis): Overridden dataSourceUri for OGR
- 06:23 PM Revision 58fdd70a (qgis): [auth][feature][ogr] Hide credentials from URI, use authcfg
- 06:22 PM Revision 83ec9de4 (qgis): Fix QGIS server test HTTP Basic auth with streaming
- 06:22 PM Revision 3919cc2f (qgis): [auth][ogr][feature] Add basic authentication to selected OGR sources
- - Protocol
- DB (integration with QGIS auth system) - 05:49 PM Bug report #11441 (Closed): Parallel multi-core rendering glitches with OTF reprojection
- Looks good! Thanks Nyall!
- 05:49 PM Bug report #11441 (Closed): Parallel multi-core rendering glitches with OTF reprojection
- Looks good! Thanks Nyall!
- 01:41 AM Bug report #11441: Parallel multi-core rendering glitches with OTF reprojection
- Anita -can we close this? Should be fixed in master and recent 2.18
- 05:44 PM Bug report #17201 (Closed): QGIS master crashes when trying to expand a spatiaLite layer in the D...
- 05:42 PM Bug report #17201: QGIS master crashes when trying to expand a spatiaLite layer in the DB manager
- Alessandro Pasotti wrote:
> Can we close this?
I would say --> Closed.
I work with that on a daily basis and the... - 05:40 PM Revision fe4f1500 (qgis): Merge pull request #5563 from boundlessgeo/BD-2469-pem-key-encoding
- [auth][bugfix] Import pvt keys with unknown file extension
- 05:27 PM Bug report #17445 (Feedback): Custom Certificate Configuration on 2.99 on Ubuntu 17.10
- I just did a new install on Ubuntu 17.10 of QGIS 2.99. When I first start it I'm getting a Custom Certificate Configu...
- 04:58 PM Bug report #9301 (Closed): Impossible to open *.xls file from folder containing cyrillic
- Workarounded in GDAL trunk https://trac.osgeo.org/gdal/changeset/40700 and GDAL 2.2 branch https://trac.osgeo.org/gda...
- 04:58 PM Bug report #9301 (Closed): Impossible to open *.xls file from folder containing cyrillic
- Workarounded in GDAL trunk https://trac.osgeo.org/gdal/changeset/40700 and GDAL 2.2 branch https://trac.osgeo.org/gda...
- 03:50 PM Revision 86247cfd (qgis): [OGR provider] Support 64bit FID (fixes #16404)
- 03:49 PM Revision 2c49631b (qgis): [OGR provider] Support 64bit FID (partially implemented per 8f3d44d4e93...
- 03:49 PM Bug report #16404 (Closed): OGR error on feature: id too large
- Applied in changeset commit:qgis|2c49631bc98da90d1657005abfd1fe6ca7a88d2b.
- 03:49 PM Bug report #16404 (Closed): OGR error on feature: id too large
- Applied in changeset commit:qgis|2c49631bc98da90d1657005abfd1fe6ca7a88d2b.
- 02:48 PM Revision f177ba31 (qgis): Remove unused code
- 02:39 PM Bug report #8332 (Feedback): QGIS uses comma as decimal separator for shapefile attribute data
- @marco Do you reproduce with recent GDAL versions ? Normally this issue has been fixed in GDAL 2.0
- 02:39 PM Bug report #8332 (Feedback): QGIS uses comma as decimal separator for shapefile attribute data
- @marco Do you reproduce with recent GDAL versions ? Normally this issue has been fixed in GDAL 2.0
- 02:27 PM Bug report #17311 (Closed): QGIS crashes when trying to save edits on Oracle Spatial layers added...
- I couldn't specifically reproduce with editing, but very fast zoom in/zoom out with the mouse wheel triggered crashes...
- 02:27 PM Bug report #17311 (Closed): QGIS crashes when trying to save edits on Oracle Spatial layers added...
- I couldn't specifically reproduce with editing, but very fast zoom in/zoom out with the mouse wheel triggered crashes...
- 02:08 PM Bug report #17292 (In Progress): Data Source Manager: WFS loads layer two time if you use the Add...
- https://github.com/qgis/QGIS/pull/5616
- 02:08 PM Bug report #17292 (In Progress): Data Source Manager: WFS loads layer two time if you use the Add...
- https://github.com/qgis/QGIS/pull/5616
- 02:08 PM Bug report #17292 (In Progress): Data Source Manager: WFS loads layer two time if you use the Add...
- https://github.com/qgis/QGIS/pull/5616
- 02:08 PM Bug report #17292 (In Progress): Data Source Manager: WFS loads layer two time if you use the Add...
- https://github.com/qgis/QGIS/pull/5616
- 02:08 PM Bug report #17292 (In Progress): Data Source Manager: WFS loads layer two time if you use the Add...
- https://github.com/qgis/QGIS/pull/5616
- 01:57 PM Bug report #17418: UnicodeEncodeError when trying to create new layer with spatial index in DB ma...
- Works as expected on master.
- 01:48 PM Bug report #17442: Categorized style issue using numeric fields with NULL values
- Ugly bug... wasn't an issue in 2.8 and 2.12... likely to have surfaced at some point in 2.14(?).
- 01:48 PM Bug report #17442: Categorized style issue using numeric fields with NULL values
- Ugly bug... wasn't an issue in 2.8 and 2.12... likely to have surfaced at some point in 2.14(?).
- 01:23 PM Bug report #14932 (Feedback): "NULL" text in null field should disappear as soon as a field gets ...
- gcarrillo - wrote:
> Reopened as this still happens in QGIS master (v2.99).
>
> This happens in forms as well. Yo... - 01:04 PM Bug report #17421 (Feedback): processing: adding refactor fields alg into a model throws an error
- I cna't confirm this on master/osgeo4w. Anyway I have seen this (once) when trying to edit the refactor field alg alr...
- 01:00 PM Bug report #17127 (Closed): Control order by which bands are stacked
- Closing in favor of #17327 because this is more general.
- 01:00 PM Bug report #17127 (Closed): Control order by which bands are stacked
- Closing in favor of #17327 because this is more general.
- 12:59 PM Bug report #17327: Sorting of input layer Layers in Processing "multiple inputs" widgets
- Nyall Dawson wrote:
> This should be fixed in master - can you confirm?
I just checked: is not completely fixed. ... - 12:56 PM Feature request #17321 (Closed): Sorting of layers in Processing "multiple input" widget
- 12:54 PM Bug report #17432: GRASS unit error: installation is not valid error message
- Confirmed on High Sierra too.
- 12:54 PM Bug report #17432: GRASS unit error: installation is not valid error message
- Confirmed on High Sierra too.
- 12:54 PM Bug report #17432: GRASS unit error: installation is not valid error message
- Confirmed on High Sierra too.
- 11:52 AM Bug report #17439: Rendering problems - objects randomly appears and disappears
- Jurgen, OK, all good.
The issue captured in the video has to do with joined fields; ignore my noise ;) - 09:30 AM Bug report #17439: Rendering problems - objects randomly appears and disappears
- Mathieu Pellerin - nIRV wrote:
> Jürgen, are you sure this is fixed? I still see this issue on my build (linux) whic... - 09:09 AM Bug report #17439: Rendering problems - objects randomly appears and disappears
- With the latest update from OSGEO4W the problem is fixed (at least, for me).
- 04:02 AM Bug report #17439: Rendering problems - objects randomly appears and disappears
- Jürgen, are you sure this is fixed? I still see this issue on my build (linux) which includes the referred commit.
... - 11:36 AM Revision b7d05829 (qgis): try to make travis happy
- 11:29 AM Revision 79c8f968 (qgis): Remove OK button and add CLOSE
- Yes, it's one more click to quit, but more intuitive UI
- 11:29 AM Revision 1ab20bd7 (qgis): Iterate over const
- 11:27 AM Bug report #14719 (Feedback): GRASS 7 algorithms does not work in the graphical modeller (python ...
- Emilio Gomez wrote:
> The same problem with a model created and executed in QGIS 2.16 in Kubuntu 16.04 Xenial.
> I... - 11:27 AM Bug report #14719 (Feedback): GRASS 7 algorithms does not work in the graphical modeller (python ...
- Emilio Gomez wrote:
> The same problem with a model created and executed in QGIS 2.16 in Kubuntu 16.04 Xenial.
> I... - 11:24 AM Bug report #17319: v.net category value
- Alexander Bruy wrote:
> IMHO this should be closed. As I understand this is question about GRASS tool usage, not a b... - 11:14 AM Bug report #16868 (Open): undo/redo functionality broken in QGIS master
- I just tried on master from osgeo4w and still can see what is described in the ticket. Used a polygon shapefile for t...
- 11:14 AM Bug report #16868 (Open): undo/redo functionality broken in QGIS master
- I just tried on master from osgeo4w and still can see what is described in the ticket. Used a polygon shapefile for t...
- 07:09 AM Bug report #16868 (Feedback): undo/redo functionality broken in QGIS master
- I can't reproduce this anymore - can you?
- 11:12 AM Revision 66b27dcd (qgis): Use vertex iterator
- 11:06 AM Feature request #2724 (Closed): Look for (like firefox)
- Not needed now we have Nyalls locator bar.
- 11:06 AM Feature request #2724 (Closed): Look for (like firefox)
- Not needed now we have Nyalls locator bar.
- 11:00 AM Bug report #16177 (Reopened): DB-Manager: incorrect srs_id in table gpkg_contents when creating n...
- Thanks for having a look at it... I tried with QGIS 2.18.14 and I unfortunately still get the same behaviour when usi...
- 10:49 AM Revision c2f68d6f (qgis): background color on constraint fields reset on toggle edit
- if editable, the backgroundcolor should be set according the constraint result
if not editable, the backgroundcolor s... - 10:49 AM Revision 53d642ce (qgis): Constraint Result Indicator invisible when not in editable mode
- The icon for the constraint result indicator cross/tipp disappears when not in editable mode
this is made by the new ... - 10:46 AM Bug report #17438: Raster Clipping working very slow
- Also 2.6.1 is a really *old* release and the suggested way to run the (qgis native, or gdal) tools is now using the P...
- 10:35 AM Bug report #17056 (Feedback): exporting categorized symbology to sld then importing results in al...
- 09:23 AM Bug report #17056: exporting categorized symbology to sld then importing results in all features ...
- 1) Is it possible to create/add a little dataset+sld's to this issue? So we all talk about the same things/rules?
... - 10:32 AM Revision e1f5348a (qgis): Add tab order and enable help button
- 09:58 AM Bug report #17444 (Closed): GeoNode data provider completely ignores authentication
- Authentication implementation in GeoNode provider is completely missing, the GUI is in place but connected to nothing...
- 09:09 AM Revision 822a123e (qgis): Add extra checks to PEM encoding test
- Not really necessary but for extra safety
- 09:00 AM Revision 9e192ad5 (qgis): Added various line endings PEM tests
- 08:47 AM Revision 3b2228ad (qgis): Merge pull request #5613 from nyalldawson/custom_crs_fixes
- Custom crs fixes
- 08:47 AM Bug report #17257 (Closed): Custom project CRS is not restored correctly on project load
- Applied in changeset commit:qgis|f2b5a5952bdd35739d665f49a1e49d1d0209222c.
- 08:47 AM Bug report #17257 (Closed): Custom project CRS is not restored correctly on project load
- Applied in changeset commit:qgis|f2b5a5952bdd35739d665f49a1e49d1d0209222c.
- 08:47 AM Revision fd18c3bc (qgis): Merge pull request #5559 from nyalldawson/custom_crs
- Fix issues with custom CRS dialog
- 08:46 AM Bug report #7036 (Closed): Custom CRS Testbox giving wrong results
- Applied in changeset commit:qgis|f68e42900b8bb918b458274714461352f92d5848.
- 08:46 AM Bug report #7036 (Closed): Custom CRS Testbox giving wrong results
- Applied in changeset commit:qgis|f68e42900b8bb918b458274714461352f92d5848.
- 08:46 AM Bug report #17258 (Closed): Custom CRS Definition dialog is unusable
- Applied in changeset commit:qgis|c8a62c5c066d441f88e665f0801aab8c31322ff9.
- 08:46 AM Bug report #17258 (Closed): Custom CRS Definition dialog is unusable
- Applied in changeset commit:qgis|c8a62c5c066d441f88e665f0801aab8c31322ff9.
- 08:35 AM Feature request #7192 (Closed): system specific location of qgis settings
- No longer valid after user profiles have been added.
- 08:35 AM Feature request #7192 (Closed): system specific location of qgis settings
- No longer valid after user profiles have been added.
- 08:28 AM Revision 702dfdab (qgis): Tweak crash message
- 08:13 AM Revision 4f22b459 (qgis): Fix typos
- 07:30 AM Revision 6f7ad82a (qgis): Fix crash when clearing all nodes using node tool
- 07:28 AM Bug report #16890: Crash doing rollback
- Can't reproduce - probably fixed alongside #16771
- 06:53 AM Feature request #12932 (Closed): Better "Invalid Layer" error message
- Applied in changeset commit:qgis|66c7d6868c744cd97e70c4e89f07af7ddb5a13f7.
- 06:53 AM Feature request #12932 (Closed): Better "Invalid Layer" error message
- Applied in changeset commit:qgis|66c7d6868c744cd97e70c4e89f07af7ddb5a13f7.
- 06:51 AM Revision 66c7d686 (qgis): Fix #12932 - Send and show layer load errors to user
- 06:28 AM Revision be8bad8e (qgis): Fix duplicate crsChanged signal emitted when loading projects
- 06:26 AM Revision f2b5a595 (qgis): Fix loading 2.x projects with custom CRS
- Fixes #17257
- 06:13 AM Revision 7cb15c08 (qgis): Optimize extract nodes algorithm
- 06:11 AM Revision e967881e (qgis): Fix incorrect authid and description after saving a user crs
- 06:01 AM Revision 39851f44 (qgis): Invalidate crs cache after adding a new user CRS
- Refs #17257
- 05:57 AM Revision 9369e5c1 (qgis): [MSSQL] Don't add constraints for identity columns
- These are generated server side and will block the form if we set
this client side - 05:33 AM Revision e0b2c27c (qgis): Fix return type for QgsCoordinateReferenceSystem::saveAsUserCrs
- 02:58 AM Revision 82644fb3 (qgis): uh oh ;)
- 02:09 AM Revision 320bda01 (qgis): [bugfix] Issue #17387: MSSQL provider fails to load UNIQUEIDENTIFIER fi...
- * Fix #17387: MSSQL provider fails to load UNIQUEIDENTIFIER fields
- 02:09 AM Bug report #17387 (Closed): MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Applied in changeset commit:qgis|320bda01f40be5dae9b76a17390e3369b7d11211.
- 02:09 AM Bug report #17387 (Closed): MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Applied in changeset commit:qgis|320bda01f40be5dae9b76a17390e3369b7d11211.
2017-11-12
- 09:57 PM Revision 150a64e9 (qgis): fix warnings and translation strings
- 09:27 PM Revision 68da18c0 (qgis): Attempt at fixing warning 'case value ‘2147483648’ not in enumerated ty...
- 09:18 PM Revision 8cefb45d (qgis): QgsOgrLayerItem(): avoid useless dataset opening
- 09:18 PM Revision 96ec6645 (qgis): GDALDataItems / OGRDataItems: avoid listing .map and .dat files of a .tab
- 08:16 PM Revision 75ea3726 (qgis): Merge pull request #5610 from landryb/fix/32-bits-build
- Remove useless cast breaking build on 32-bits os
- 03:04 PM Revision 7d8f3f72 (qgis): [OGR provider] Make extent() return a isNull() rectangle on empty layer...
- 02:56 PM Revision 3ff0f697 (qgis): [OGR provider] Make extent() return a isNull() rectangle on empty layer...
- 02:56 PM Bug report #16721 (Closed): Problem with an empty Geopackage layer and zoom to group
- Applied in changeset commit:qgis|3ff0f6979407f4dbc466b37b8087d585900cc3de.
- 02:56 PM Bug report #16721 (Closed): Problem with an empty Geopackage layer and zoom to group
- Applied in changeset commit:qgis|3ff0f6979407f4dbc466b37b8087d585900cc3de.
- 11:35 AM Bug report #17428: Python editor of init script of form only uses half the window size
- Thank your, Alex!
- 11:30 AM Bug report #17428 (Closed): Python editor of init script of form only uses half the window size
- Applied in changeset commit:qgis|7e699f18c7225f7e434c9c8ebf185894f9f6f923.
- 11:30 AM Bug report #17428 (Closed): Python editor of init script of form only uses half the window size
- Applied in changeset commit:qgis|7e699f18c7225f7e434c9c8ebf185894f9f6f923.
- 11:29 AM Revision 7e699f18 (qgis): improve layout in Python init function editor (fix #17428)
- 11:26 AM Revision 944d2f40 (qgis): Fix windows build
- 11:02 AM Bug report #17440 (Closed): EPSG 25832 tiffs
- 11:00 AM Bug report #17439 (Closed): Rendering problems - objects randomly appears and disappears
- Fixed in commit:fef56184bc032482
- 11:00 AM Bug report #17439 (Closed): Rendering problems - objects randomly appears and disappears
- Fixed in commit:fef56184bc032482
- 10:58 AM Revision e4596052 (qgis): Add local symbols to stack trace in crash
- 07:59 AM Revision 97020ff1 (qgis): Remove useless cast breaking build on 32-bits os
- error: case value evaluates to 2147483655, which cannot be narrowed to type 'long' [-Wc++11-narrowing]
- 07:53 AM Revision 91e23530 (qgis): [needs-docs] Remove options for making layer names and groups bold
- Either these options are desirable, in which case they should
be the default settings, or not, in which case we don't... - 02:11 AM Revision 41abc0b6 (qgis): Merge pull request #5530 from DelazJ/chkgeom_messages
- [Geometry Checker] Improve displayed message by indicating the layer…
- 02:11 AM Revision 0fa9041c (qgis): Merge pull request #5528 from DelazJ/geometrycheck
- [Geometry Checker] Better handling of the geometry checker dialog
- 02:08 AM Revision c1b683b5 (qgis): Merge pull request #5595 from alexbruy/fix-north-arrow
- [north arrow] prevent crash if project CRS is not defined
- 02:08 AM Bug report #16874 (Closed): Error "Could not create transform to calculate true north" when a nor...
- Applied in changeset commit:qgis|19b1b7992d300aebfa72c6a0ee57431ce174677d.
- 02:08 AM Bug report #16874 (Closed): Error "Could not create transform to calculate true north" when a nor...
- Applied in changeset commit:qgis|19b1b7992d300aebfa72c6a0ee57431ce174677d.
2017-11-11
- 05:37 PM Bug report #17443 (Closed): PROCESSING: Mac OS Grass help path error
- grassHelpPath is returning None, but error is not handled....
- 03:08 PM Bug report #17428 (In Progress): Python editor of init script of form only uses half the window size
- Pull-request https://github.com/qgis/QGIS/pull/5604
- 03:08 PM Bug report #17428 (In Progress): Python editor of init script of form only uses half the window size
- Pull-request https://github.com/qgis/QGIS/pull/5604
- 03:08 PM Bug report #17428 (In Progress): Python editor of init script of form only uses half the window size
- Pull-request https://github.com/qgis/QGIS/pull/5604
- 02:31 PM Revision c3b97827 (qgis): Review all r.* description files
- 01:16 PM Bug report #17017 (Rejected): QgsDataSourceURI missing from qgis.core
- In master this class was renamed to QgsDataSourceUri
- 01:16 PM Bug report #17017 (Rejected): QgsDataSourceURI missing from qgis.core
- In master this class was renamed to QgsDataSourceUri
- 01:00 PM Revision ef70eaf8 (qgis): Formatting fix
- 12:17 PM Revision 8ae45fab (qgis): [GML parser/WFS provider] Fix crash when typename and geometry field na...
- 12:11 PM Revision 66518eb9 (qgis): [GML parser/WFS provider] Fix crash when typename and geometry field na...
- 12:11 PM Bug report #15942 (Closed): Bad GML causes crash
- Applied in changeset commit:qgis|66518eb9ee609042de02f175a2f8e1b47ae22bc8.
- 12:11 PM Bug report #15942 (Closed): Bad GML causes crash
- Applied in changeset commit:qgis|66518eb9ee609042de02f175a2f8e1b47ae22bc8.
- 10:33 AM Bug report #17272: QGIS shows different geometry type in layer 'information' then ogrinfo
- Feel free to close this.
My point is just that I think 'notable geofoss tools' should use the same (and preferabl... - 08:11 AM Revision bcb815bb (qgis): Merge pull request #5602 from nyalldawson/modernize2
- Apply some more clang-tidy modernizations
- 07:00 AM Revision 5a6c222e (qgis): Fix Coverity null pointer dereference issues
- 06:48 AM Revision a9145f16 (qgis): Avoid Coverity unchecked return value warnings
- 06:44 AM Revision 48c7e31e (qgis): Fix Coverity uninitialized member warnings
- 06:34 AM Revision 450887ea (qgis): Fix documentation test
- 06:22 AM Revision 2e6d125a (qgis): Use =default, =delete where possible
- 03:19 AM Revision bcd90715 (qgis): Run clang-tidy code readability fixits
- 02:29 AM Revision c97fa5bd (qgis): Cleanup some constructors
- 01:54 AM Revision 871f7130 (qgis): Use clang-tidy modernize-use-default-member-init to modernize initializers
2017-11-10
- 11:52 PM Bug report #17272: QGIS shows different geometry type in layer 'information' then ogrinfo
- This is just a terminology difference. 25D = 2.5D. Probably that the "3D MultiPolygon" in ogrinfo is not appropriate,...
- 11:49 PM Bug report #15754 (Feedback): editing several layers in geopackage - database is locked
- Can anyone retry with QGIS master ? Changes done in commit:8f3d44d4e9321efc035a6080b161f5dd48d4f230 should likely fix...
- 11:49 PM Bug report #15754 (Feedback): editing several layers in geopackage - database is locked
- Can anyone retry with QGIS master ? Changes done in commit:8f3d44d4e9321efc035a6080b161f5dd48d4f230 should likely fix...
- 11:47 PM Bug report #16902 (Closed): GPKG table referenced by Id instead of layername
- This has been fixed in QGIS master per commit:1822b76c1a69418e44d7a1186e16f54d670267ad
- 11:47 PM Bug report #16902 (Closed): GPKG table referenced by Id instead of layername
- This has been fixed in QGIS master per commit:1822b76c1a69418e44d7a1186e16f54d670267ad
- 11:44 PM Bug report #16039 (Closed): QGIS crash when loading Geomedia mdb, ogr2ogr works fine
- GDAL issue fixed in GDAL trunk per https://trac.osgeo.org/gdal/changeset/40685 and GDAL 2.2 branch per https://trac.o...
- 11:44 PM Bug report #16039 (Closed): QGIS crash when loading Geomedia mdb, ogr2ogr works fine
- GDAL issue fixed in GDAL trunk per https://trac.osgeo.org/gdal/changeset/40685 and GDAL 2.2 branch per https://trac.o...
- 11:44 PM Bug report #16039 (Closed): QGIS crash when loading Geomedia mdb, ogr2ogr works fine
- GDAL issue fixed in GDAL trunk per https://trac.osgeo.org/gdal/changeset/40685 and GDAL 2.2 branch per https://trac.o...
- 10:37 PM Revision 8c6e0296 (qgis): Merge pull request #5601 from rouault/unblacklist_PyQgsDBManagerGpkg
- Fix DBManager + PyQgsDBManagerGpkg and unblack list it for Travis-CI
- 10:02 PM Revision 95feb87d (qgis): Fix DBManager + PyQgsDBManagerGpkg and unblack list it for Travis-CI
- 09:57 PM Revision a65f072b (qgis): Merge pull request #5598 from rouault/gdal_ogr_extensions
- [GDAL/OGR providers] Improve list of extensions, remove duplicates, support netCDF vector (fixes #17000)
- 09:57 PM Bug report #17000 (Closed): netCDF vector can not be loaded from browser panel
- Applied in changeset commit:qgis|0ba03e59ee12e70d2ce1c90ede89d9b8c7cddebc.
- 09:57 PM Bug report #17000 (Closed): netCDF vector can not be loaded from browser panel
- Applied in changeset commit:qgis|0ba03e59ee12e70d2ce1c90ede89d9b8c7cddebc.
- 09:37 PM Bug report #8786 (Closed): Plugin manager didn't remember last visited tab
- Applied in changeset commit:qgis|f97a011f96f1ff81d702a74a8f2d6280db2dfc4d.
- 09:37 PM Bug report #8786 (Closed): Plugin manager didn't remember last visited tab
- Applied in changeset commit:qgis|f97a011f96f1ff81d702a74a8f2d6280db2dfc4d.
- 09:35 PM Revision f97a011f (qgis): [Plugin manager] Remember last visited tab. Fixes #8786
- 09:31 PM Revision 992d1e26 (qgis): Merge pull request #5587 from nyalldawson/3d
- Fix 3d renderer does not work with multi-point layers
- 09:16 PM Revision 0ba03e59 (qgis): [GDAL/OGR providers] Improve list of extensions, remove duplicates, sup...
- - Read GDAL 2.0 GDAL_DMD_EXTENSIONS metadata item to retrieve a list of extensions
- Remove 'duplicated' drivers from... - 09:00 PM Revision fb205b1a (qgis): Merge pull request #5589 from nyalldawson/remote_proc_exp
- [processing] Remove expression buttons from parameters outside modeler
- 05:56 PM Revision 67f84654 (qgis): Merge pull request #5520 from pblottiere/server_bugfix_width_height
- [server][bugfix] Fixes #17399 WIDTH and HEIGHT parameters are not mandatory for GetPrint
- 05:56 PM Bug report #17399 (Closed): GetPrint "Invalid width/height parameters" error
- Applied in changeset commit:qgis|edf9755c6cd582214687456ca0705aed9f66854a.
- 05:56 PM Bug report #17399 (Closed): GetPrint "Invalid width/height parameters" error
- Applied in changeset commit:qgis|edf9755c6cd582214687456ca0705aed9f66854a.
- 05:19 PM Revision edf9755c (qgis): Fixes #17399 GetPrint doesn't need a proper image with width/height
- 05:19 PM Revision 2a7f23fd (qgis): Update tests
- 05:04 PM Bug report #17388: QGIS crashes on featureCount()
- Backported to 2.18
- 04:36 PM Bug report #17388: QGIS crashes on featureCount()
- Fixed in master: requires backport to 2.18
- 04:36 PM Bug report #17388: QGIS crashes on featureCount()
- Fixed in master: requires backport to 2.18
- 04:35 PM Bug report #17388 (Closed): QGIS crashes on featureCount()
- Applied in changeset commit:qgis|fe5653101a57cc2a2b5d1d29b65fb3fdb1b6211a.
- 04:35 PM Bug report #17388 (Closed): QGIS crashes on featureCount()
- Applied in changeset commit:qgis|fe5653101a57cc2a2b5d1d29b65fb3fdb1b6211a.
- 05:02 PM Revision ecacb3b0 (qgis): Merge pull request #5519 from pblottiere/server_bugfix_layernotfoud
- [server][bugfix] Fixes #17400 by returning an empty response instead of an exception
- 05:02 PM Bug report #17400 (Closed): GetFeatureInfo "Layer not found" error
- Applied in changeset commit:qgis|39bce943bd0b6a20b4745c471773adbcdae792ee.
- 05:02 PM Bug report #17400 (Closed): GetFeatureInfo "Layer not found" error
- Applied in changeset commit:qgis|39bce943bd0b6a20b4745c471773adbcdae792ee.
- 04:43 PM Revision 269038ef (qgis): [bugfix][postgresql] Fix crashes on featureCount()
- Fixes #17388
Backported from master fe5653101a57 - 04:32 PM Revision fe565310 (qgis): [bugfix][postgresql] Fix crashes on featureCount()
- Fixes #17388
Needs backporting - 04:26 PM Revision 534e1e81 (qgis): Add test
- 04:25 PM Revision 39bce943 (qgis): Fixes #17400 by returning an empty response if a layer is ignored due t...
- 04:14 PM Revision 96e597a8 (qgis): Add some tests
- 04:01 PM Revision c9c1c349 (qgis): Fixes #16852 by adding click_x and click_y variables to resolve actions
- 03:47 PM Bug report #17231: Processing help system expects wrong link
- > I don't think this is an issue, as QGIS documentation for master is not ready yet and we can't be 100% sure that cu...
- 07:59 AM Bug report #17231 (Feedback): Processing help system expects wrong link
- I don't think this is an issue, as QGIS documentation for master is not ready yet and we can't be 100% sure that curr...
- 03:44 PM Revision 10292762 (qgis): [auth] New test cases for EC SSL Keys and encodings
- 03:43 PM Revision f52dbeba (qgis): [auth] Also parse EC keys and get encoding from content
- 03:16 PM Revision 2ca4ee5b (qgis): Merge pull request #5596 from boundlessgeo/bugfix-5212-ogr-proxy
- [bugfix] Apply proxy configuration to OGR connections
- 03:15 PM Bug report #5212 (Closed): Proxy settings ignored for layers
- Applied in changeset commit:qgis|d8fc6e877bbc5645cddf43b976e018e5c854a995.
- 03:15 PM Bug report #5212 (Closed): Proxy settings ignored for layers
- Applied in changeset commit:qgis|d8fc6e877bbc5645cddf43b976e018e5c854a995.
- 01:41 PM Bug report #5212 (In Progress): Proxy settings ignored for layers
- 02:43 PM Revision f2abcf2d (qgis): Spelling
- 02:14 PM Bug report #17440: EPSG 25832 tiffs
- Its a duplicate of #13398
- 04:57 AM Bug report #17440 (Closed): EPSG 25832 tiffs
- When using Georeferencer QGIS converts Tiffs created in EPSG 25832 to EPSG 3044.
Step to reproduce.
Use polynomia... - 02:08 PM Bug report #17442 (Closed): Categorized style issue using numeric fields with NULL values
- When a vector layer is classified using the categorized style on numeric fields with NULL values, unchecking the blan...
- 01:33 PM Revision 77a73f41 (qgis): [tests] Brand new C++ test and new py test case for ogr proxy
- 01:31 PM Revision e85897c3 (qgis): Skip proxy auth settings if proxy is disabled
- This does not really change anything but it makes more sense
- 01:31 PM Revision d8fc6e87 (qgis): [bugfix] Apply proxy configuration to OGR connections
- Fixes #5212 Proxy settings ignored for layers
- 11:02 AM Bug report #17439: Rendering problems - objects randomly appears and disappears
- I've checked the last version without this bug, its: ...
- 10:50 AM Bug report #10828: project loading and adding/removing layers is slow if project has composers
- My project files with many layouts still load painfully slow from network drives. I'm on version 2.18.14.
- 10:34 AM Bug report #17423: QGIS select by expression mismatch with MSSQL layers
- I uninstalled QGIS 2.18.11 and installed 2.18.14.
I can reproduce the issue on 2.18.14. - 09:56 AM Bug report #16874 (In Progress): Error "Could not create transform to calculate true north" when ...
- Pull-request https://github.com/qgis/QGIS/pull/5595
- 09:56 AM Bug report #16874 (In Progress): Error "Could not create transform to calculate true north" when ...
- Pull-request https://github.com/qgis/QGIS/pull/5595
- 09:52 AM Revision 19b1b799 (qgis): prevent crash from north arrow if project CRS is not defined (fix #16874)
- 09:48 AM Bug report #17441 (Closed): Autogenerated relation names result in very large dialogs
- If you discover relations, QGIS creates a very long unique name for them:
!relations.png!
This causes the attri... - 09:13 AM Bug report #16911 (Closed): Spatial query plugin and disjoint operator is wrong
- Closed as "won't fix" because plugin removed from master and there is working alternative in Processing
- 09:13 AM Bug report #16911 (Closed): Spatial query plugin and disjoint operator is wrong
- Closed as "won't fix" because plugin removed from master and there is working alternative in Processing
- 09:06 AM Bug report #15680 (Closed): Clipping of raster with GDAL may hang QGIS
- Closed for the lack of feedback. Please reopen if necessary
- 09:06 AM Bug report #15680 (Closed): Clipping of raster with GDAL may hang QGIS
- Closed for the lack of feedback. Please reopen if necessary
- 09:02 AM Bug report #17319: v.net category value
- IMHO this should be closed. As I understand this is question about GRASS tool usage, not a bug.
- 08:49 AM Bug report #17108 (Closed): Project with CRS set to 'No projection (or unknown/non-Earth projecti...
- 08:21 AM Revision f8cbc42d (qgis): Merge pull request #5594 from nyalldawson/batch_lazy
- [processing] Fix issues with batch processing and large count of layers
- 08:20 AM Revision 6de3980e (qgis): Fix issues in vector layers properties dialog
- - remove frames from new pages
- fix cramped widgets on hidpi screens
- fix broken aux storage layout
- standardise m... - 08:07 AM Bug report #17438 (Feedback): Raster Clipping working very slow
- QGIS uses GDAL tools for raster operations. Please try to clip same raster in command line and see if it takes the sa...
- 08:06 AM Bug report #17435 (Closed): Spatial Query crashes QGIS when there are non-spatial postgresql tables
- Closing as "wontfix" as this plugin removed from master.
- 08:06 AM Bug report #17435 (Closed): Spatial Query crashes QGIS when there are non-spatial postgresql tables
- Closing as "wontfix" as this plugin removed from master.
- 08:02 AM Feature request #17321 (Rejected): Sorting of layers in Processing "multiple input" widget
- Duplicates #17327
- 08:02 AM Feature request #17321 (Rejected): Sorting of layers in Processing "multiple input" widget
- Duplicates #17327
- 08:00 AM Revision 2ed22488 (qgis): [processing] Add option whether to load batch output layers on completion
- By always trying to load all layers, we severely limit the usefulness
of batch processing. E.g. try clipping 200 laye... - 08:00 AM Revision 3fc90301 (qgis): [processing] Only load layers when absolutely required
- This change avoids holding onto resources and layers from earlier iterations,
and allows batch processing of many mor... - 07:35 AM Revision 30cefca1 (qgis): Merge pull request #5593 from nyalldawson/batch_rows
- [processing] Change min rows in batch processing to 1
- 07:34 AM Revision 9b85e5b7 (qgis): Merge pull request #5592 from nyalldawson/batch
- [processing] Fixes for batch processing
- 07:34 AM Feature request #16310 (Closed): Persist folder location to save/restore batch processing config ...
- Applied in changeset commit:qgis|8526a2dd3f6e03d4b8cde7964fa42ed9f5df62cf.
- 07:34 AM Feature request #16310 (Closed): Persist folder location to save/restore batch processing config ...
- Applied in changeset commit:qgis|8526a2dd3f6e03d4b8cde7964fa42ed9f5df62cf.
- 07:34 AM Bug report #17227 (Closed): Impossible to resize columns in Batch processing interface
- Applied in changeset commit:qgis|797437823c407c88c23c0f38211b4524098207ba.
- 07:34 AM Bug report #17227 (Closed): Impossible to resize columns in Batch processing interface
- Applied in changeset commit:qgis|797437823c407c88c23c0f38211b4524098207ba.
- 07:34 AM Bug report #17429 (Closed): Clip in batch does not work in Master
- Applied in changeset commit:qgis|87ffdabbb38e6b1bc0e0ec884b28ec74710633e2.
- 07:34 AM Bug report #17429 (Closed): Clip in batch does not work in Master
- Applied in changeset commit:qgis|87ffdabbb38e6b1bc0e0ec884b28ec74710633e2.
- 07:34 AM Revision 019a4d2a (qgis): Merge pull request #5155 from alexbruy/processing-saga
- [processing] port SAGA to new API
- 04:49 AM Revision e7a1c044 (qgis): Trigger layer repaint when adding field-less features (fixes #17426)
- 04:49 AM Bug report #17426 (Closed): regression: adding new features to point/multipoint layers fails to r...
- Applied in changeset commit:qgis|e7a1c0440abaf144636e8e607f0ed347cf92d308.
- 04:49 AM Bug report #17426 (Closed): regression: adding new features to point/multipoint layers fails to r...
- Applied in changeset commit:qgis|e7a1c0440abaf144636e8e607f0ed347cf92d308.
- 04:08 AM Bug report #17426: regression: adding new features to point/multipoint layers fails to render unt...
- Note: this actually impacts not only memory provider's point layers, the regression is also present with field-less s...
- 04:48 AM Revision bd9945ff (qgis): [processing] Change min rows in batch processing to 1
- While no-one is likely to use the batch dialog to run a single
operation, it's a bit unexpected to see two empty rows... - 04:43 AM Revision feacb763 (qgis): Fix python error
- 04:40 AM Revision 08b189df (qgis): Fix error when double clicking destination param in batch dialog
- 04:22 AM Revision feb66d2c (qgis): Fix saving/load batch processing models
- 04:17 AM Revision 8526a2dd (qgis): Remember last used folder for processing batch save/load
- Fixes #16310
- 02:33 AM Revision 9bac962a (qgis): Fix batch processing progress bar never hits 100%, also fix fragile
- cursor handling
- 02:25 AM Revision 79743782 (qgis): [processing] Fix cannot resize columns in batch dialog
- Fixes #17227
- 02:23 AM Revision a23f315f (qgis): Fix duplicate 'all files' entry in batch input file selection dialog
- 02:11 AM Revision 87ffdabb (qgis): [processing] Fix crash in batch processing dialog
- Fixes #17429
- 01:55 AM Feature request #15879 (Feedback): Batch Files
- I believe both these issues are resolved with master
- 01:55 AM Feature request #15879 (Feedback): Batch Files
- I believe both these issues are resolved with master
- 01:54 AM Revision 4bdfaa5f (qgis): Fix astyle version check for macOS
- Hard to emulate natural version sorting on macOS. Just use numeric.
https://stackoverflow.com/questions/21394536 - 01:54 AM Feature request #17228 (Closed): switch between simple and batch process dialogs, back and forth
- Duplicate of #16893
- 01:54 AM Feature request #17228 (Closed): switch between simple and batch process dialogs, back and forth
- Duplicate of #16893
- 01:42 AM Revision 612f5160 (qgis): [processing] Remove expression buttons from parameters outside modeler
- Since these expressions were only evaluated immediately, it led to
confusing behavior for users who were expecting th... - 01:25 AM Bug report #17436 (Rejected): Menus appear in wrong place
- Unlikely a QGIS problem - it must be something on the platform.
- 01:25 AM Bug report #17436 (Rejected): Menus appear in wrong place
- Unlikely a QGIS problem - it must be something on the platform.
- 01:20 AM Revision abe5756d (qgis): Merge pull request #5588 from nyalldawson/acquire
- Workaround bug in Qt > 5.8 causing crashes in connection pools
2017-11-09
- 12:40 AM Revision fef56184 (qgis): Workaround bug in Qt > 5.8 causing crashes in connection pools
- tryAcquire is broken on Qt > 5.8 with negative timeouts - see:
http://bugreports.qt.io/browse/QTBUG-64413
https://li... - 12:14 AM Revision e1b76e01 (qgis): [FIX] Make the correct location for crash report
- 12:07 AM Revision c13dadf7 (qgis): Fix clear values for 3d spin boxes
- 12:01 AM Revision f80a7052 (qgis): Fix updating QgsApplication::libraryPaths; load before any Qt plugin use
- Previously, it was happening after setting the default window icon.
For macOS, refactor libraryPaths update to ensur... - 11:57 PM Revision df7a1d01 (qgis): Fix 3d renderer does not work with multipoint layers
- 11:47 PM Revision c18bd1fa (qgis): Clarify where and what Log Messages is
- 10:24 PM Revision 4c785262 (qgis): Merge pull request #5531 from boundlessgeo/fix-libpaths-update
- Fix updating QgsApplication::libraryPaths; load before any Qt plugin use
Note: could possibly be moved to QgsApplica... - 09:55 PM Bug report #17439 (Closed): Rendering problems - objects randomly appears and disappears
- When zooming in and out, objects in map randomly disappears and shows again.
I'm usually installing a new version... - 09:55 PM Revision 4c1ff1cd (qgis): [travis] Trigger libSegFault on abrt
- 09:32 PM Bug report #17438 (Closed): Raster Clipping working very slow
- I have tried to clip a raster (covering very small area) in QGIS used Raster --> Clipper. It takes huge time to compl...
- 09:01 PM Revision faa0861d (qgis): [GDAL provider] reintroduce use of unique_ptr removed in d00efde2f06459...
- 08:42 PM Revision 4daf6896 (qgis): [tr] correcting flags
- 07:35 PM Bug report #17109 (Closed): Adding WFS layer fails with "unexpected end of file"
- 07:33 PM Revision 2c1e2014 (qgis): [travis] Disable PyQgsSpatialiteProvider
- It is flaky
- 07:20 PM Revision 8d8f38d4 (qgis): [travis] Disable non-local file download tests
- 07:20 PM Bug report #17437 (Feedback): QgsFileDownloader tests need to be rewritten with a local server
- Remote servers are unreliable and a constant source of false alarms.
https://github.com/qgis/QGIS/pull/5581 - 07:18 PM Revision 3d9ca40f (qgis): [DB Manager / GPKG] Remove GDAL 1.x support
- 07:15 PM Revision bd0b4998 (qgis): add misssed import after rebase
- 07:11 PM Revision e744633f (qgis): [DB Manager / GPKG] Fix COMMIT with GDAL 2 (fix #16174)
- 07:11 PM Revision 4eed39b6 (qgis): [DB Manager / GPKG] Fix COMMIT with GDAL 2 (fix #16174)
- 07:11 PM Bug report #16174 (Closed): DB-Manager: updating GeoPackage tables doesn't work
- Applied in changeset commit:qgis|4eed39b63cde27c5fc51bca6da1aeeb57f1a53e1.
- 07:11 PM Bug report #16174 (Closed): DB-Manager: updating GeoPackage tables doesn't work
- Applied in changeset commit:qgis|4eed39b63cde27c5fc51bca6da1aeeb57f1a53e1.
- 06:54 PM Bug report #17435: Spatial Query crashes QGIS when there are non-spatial postgresql tables
- Hey Giovanni, the processing toolbox works great, thanks for the heads up.
- 06:33 PM Bug report #17435 (Feedback): Spatial Query crashes QGIS when there are non-spatial postgresql ta...
- this plugin has been removed in master and likely will not get any fix in 2.18. Use the equivalent tool in the Proces...
- 06:29 PM Bug report #17435 (Closed): Spatial Query crashes QGIS when there are non-spatial postgresql tables
- When I press the Spatial Query button QGIS crashes.
I think it's caused from having a non-spatial postgresql table... - 06:38 PM Bug report #17436 (Rejected): Menus appear in wrong place
- Dropdown menus appear lower than they should in QGIS on Linux.
Screenshot:
https://imagebin.ca/v/3gioW4EtWH5B
... - 06:34 PM Bug report #17434: OTF turned on when adding a (non spatial) postgresql table
- Here's the debug output when the non-spatial table is added after there are already spatial tables in the map canvas....
- 06:22 PM Bug report #17434 (Closed): OTF turned on when adding a (non spatial) postgresql table
- I've got a postgresql/postgis database and some tables are non-spatial.
They are uploaded to postgresql using the ... - 06:21 PM Bug report #17388: QGIS crashes on featureCount()
- Ivan Fomin wrote:
> LTR 2.14.20 is also affected
2,18 is the new LTR, 2.14 will not get anymore any fix. - 04:29 PM Bug report #17388: QGIS crashes on featureCount()
- LTR 2.14.20 is also affected
- 06:10 PM Bug report #17433 (Closed): QGIS in idle state after a while
- when screen saver is active (Boinc project one) I'm unable to get control of the QGIS main window (that I can see on...
- 06:08 PM Revision 9168161e (qgis): Merge pull request #5573 from boundlessgeo/BD-2238-auth-thread-safe
- [tests] Add XYX slippy map to test QGIS server + multi-threading
- 05:58 PM Revision 713dc970 (qgis): disable SAGA test until we have SAGA support on Travis
- 05:58 PM Revision a8a25262 (qgis): [travis] Disable PyQgsLocator test
- It's acting flaky and timing out
- 05:56 PM Revision 1b6b6cdb (qgis): [processing] fix integer numbers handling
- 05:56 PM Revision 2b218cc2 (qgis): [processing] more raster handling fixes in SAGA provider
- 05:56 PM Revision 9ba41439 (qgis): Convert SAGA ParameterTableField parameters
- 05:56 PM Revision 3822efa7 (qgis): [processing] fix rasters handling in checkParameterValues()
- 05:56 PM Revision dc9f868e (qgis): [processing] fix not initialized variable
- 05:56 PM Revision 8d91f1f1 (qgis): Restore more saga functionality
- 05:56 PM Revision 13610f64 (qgis): [processing] adopt to changes in extensions handling
- 05:56 PM Revision 4b63975e (qgis): [processing] tests for SAGA provider and related fixes
- 05:56 PM Revision 057ab170 (qgis): [processing] fix input rasters check
- 05:56 PM Revision b4214798 (qgis): [processing] infrastructure for SAGA tests
- 05:56 PM Revision 7953936c (qgis): Update SAGA ParameterMultipleInput parameters
- 05:56 PM Revision d9ac3772 (qgis): Update SAGA ParameterTable parameters
- 05:55 PM Revision 4ac6847b (qgis): Update SAGA ParameterVector params
- 05:55 PM Revision 6ef4557b (qgis): Update SAGA ParameterSelection parameters
- 05:54 PM Revision ca0b7a26 (qgis): Fix SAGA boolean parameters
- 05:54 PM Revision 85b85024 (qgis): Fix parsing of saga params
- 05:54 PM Revision 17870859 (qgis): More followups to SAGA raster parameter handling
- 05:54 PM Revision 1fc395b4 (qgis): GeoAlgorithmExecutionException -> QgsProcessingException
- 05:54 PM Revision 65faf542 (qgis): Fix excepthook handling in standalone scripts
- 05:53 PM Revision 640891ee (qgis): Update SAGA ParameterNumber params
- 05:53 PM Revision eca9bdc3 (qgis): Start porting saga algorithm base to new API
- 05:53 PM Revision b928cc61 (qgis): Update SAGA RasterOuput params
- 05:53 PM Revision 7ad764d6 (qgis): Fix bad strings in saga description file
- 05:53 PM Revision 571a5ca5 (qgis): Start bringing back saga algs - split RGB bands
- 05:53 PM Revision a1300f3d (qgis): Update SAGA ParameterRaster params
- 04:31 PM Bug report #16172 (Closed): DB-Manager: new GeoPackage tables display wrong values
- I cannot reproduce with master. And actualy this way of creating tables is not supported in GeoPackage with recent GD...
- 04:31 PM Bug report #16172 (Closed): DB-Manager: new GeoPackage tables display wrong values
- I cannot reproduce with master. And actualy this way of creating tables is not supported in GeoPackage with recent GD...
- 04:24 PM Revision d00efde2 (qgis): Merge pull request #5580 from rouault/fix_QgsRasterFileWriter_geopackage
- [GDAL provider] in create(), use newly create dataset handle to instanciate the provider (fix #17103)
- 04:24 PM Bug report #17103 (Closed): QgsRasterFileWriter fails to export raster into a geopackage
- Applied in changeset commit:qgis|c3e15f522837d1f0bdd47c1ffc1b0ab3cba5e869.
- 04:24 PM Bug report #17103 (Closed): QgsRasterFileWriter fails to export raster into a geopackage
- Applied in changeset commit:qgis|c3e15f522837d1f0bdd47c1ffc1b0ab3cba5e869.
- 04:08 PM Bug report #16177 (Closed): DB-Manager: incorrect srs_id in table gpkg_contents when creating new...
- 04:07 PM Bug report #16177: DB-Manager: incorrect srs_id in table gpkg_contents when creating new GeoPacka...
- Works on latest 2.18, provided you specify a valid EPSG code
- 04:07 PM Bug report #16177: DB-Manager: incorrect srs_id in table gpkg_contents when creating new GeoPacka...
- Works on latest 2.18, provided you specify a valid EPSG code
- 04:01 PM Revision 022f6cfd (qgis): Merge pull request #5515 from pblottiere/server_bugfix_plusspace
- [server][bugfix] Fixes #17401 by replacing '+' symbol by space
- 04:01 PM Bug report #17401 (Closed): GetFeatureInfo does not work with spaces encoded as '+'s
- Applied in changeset commit:qgis|ac24c4a37ea8e299bb935ce364297a5093ae47e8.
- 04:01 PM Bug report #17401 (Closed): GetFeatureInfo does not work with spaces encoded as '+'s
- Applied in changeset commit:qgis|ac24c4a37ea8e299bb935ce364297a5093ae47e8.
- 03:48 PM Revision b9bde107 (qgis): Merge pull request #5576 from rouault/wfst10_test_qt5
- Re-enable testWFST10
- 03:32 PM Bug report #16730 (Closed): python error in DB Manager when connecting to a Geopackage datasource
- 03:22 PM Revision c3e15f52 (qgis): [GDAL provider] in create(), use newly create dataset handle to instanc...
- Previously we created an empty file, close it and re-opened it immediately in open mode.
However for GeoPackage, if y... - 03:20 PM Revision decbde24 (qgis): Because spellchecker does not like slippy maps
- 03:09 PM Revision d8a3c67f (qgis): Constrain the Help button placement
- by avoiding the buttonbox expand
- 02:56 PM Revision 9f65fcd0 (qgis): Merge pull request #5577 from m-kuhn/valuerelref
- Fix value() method of relation reference widget
- 02:36 PM Revision b1ac56b5 (qgis): Fix value() method of relation reference widget
- 02:35 PM Revision 8abc892e (qgis): Typo
- 01:57 PM Bug report #14719: GRASS 7 algorithms does not work in the graphical modeller (python error)
- The same problem with a model created and executed in QGIS 2.16 in Kubuntu 16.04 Xenial.
It works well from process... - 01:43 PM Revision 9aa1f216 (qgis): Expose through iface methods to copy/paste features between given layers
- That is, no need to load layers into the layer tree nor make them active.
- 01:40 PM Revision f99d9aed (qgis): [tests] Add missing import when no auth is required
- 01:10 PM Revision 426b8dbc (qgis): Re-enable testWFST10
- 01:00 PM Revision 505e3659 (qgis): [WFS provider] Fix deadlock when adding WFS layer to project from Pytho...
- 12:56 PM Bug report #17432 (Closed): GRASS unit error: installation is not valid error message
- Hi
I seem to be missing the installation .app file for the GRASS plugin. I have searched my comp and the file isn'... - 12:42 PM Revision 75c41f5e (qgis): [WFS provider] Fix deadlock when adding WFS layer to project from Pytho...
- 12:42 PM Bug report #17087 (Closed): WFS provider deadlock (freezes forever waiting for mMutex to unlock)
- Applied in changeset commit:qgis|75c41f5e18f32dcf3ce7fd7c13b3838e8e7912db.
- 12:42 PM Bug report #17087 (Closed): WFS provider deadlock (freezes forever waiting for mMutex to unlock)
- Applied in changeset commit:qgis|75c41f5e18f32dcf3ce7fd7c13b3838e8e7912db.
- 12:36 PM Feature request #17431 (Open): Add turntable support (flag -t)
- Please add turntable support (flag -t) in the v.net (to creat the turntable), v.net.alloc, v.net.path, v.net.salesman...
- 12:23 PM Revision f29c9c99 (qgis): [tests] Add XYX slippy map to test QGIS server
- Plus: multi-threading server side (for speed)
This is useful for testing various authentication
shemes on a slippy-m... - 12:07 PM Bug report #17430 (Closed): Raster inputs do not show in QGIS raster calcultator when using it in...
- There is apparently no way to specify input into the raster calculate when placed in a graphical model. I assume the ...
- 11:12 AM Bug report #17429 (Closed): Clip in batch does not work in Master
- I need to clip three line shapefile with polygon shapefile
then I try to run clip as batch process,
when I go to se... - 11:11 AM Revision 032ca68b (qgis): Merge pull request #5572 from signedav/valuerelationwidget
- Value relation widget takes key again instead of value (in Attribute Form)
Fix #17261 - 11:11 AM Bug report #17261 (Closed): Value relation widget update incorrectly tries to use value instead o...
- Applied in changeset commit:qgis|032ca68ba3834d16ba34eff27e104d7fb1c6945f.
- 11:11 AM Bug report #17261 (Closed): Value relation widget update incorrectly tries to use value instead o...
- Applied in changeset commit:qgis|032ca68ba3834d16ba34eff27e104d7fb1c6945f.
- 10:31 AM Revision 7f37e707 (qgis): Add test
- 10:30 AM Revision ac24c4a3 (qgis): Fixes #17401 by replacing '+' symbol by space
- 09:16 AM Revision 1ff50fd5 (qgis): fix TestQgsFileDownloader::testLacksWritePermissionsError (followup f06...
- 09:09 AM Bug report #17428 (Closed): Python editor of init script of form only uses half the window size
- If one opens the Python editor of the init script of a form (opened through the little Python button in the forms tab...
- 09:02 AM Revision 3fc4be3f (qgis): [auth] Remove unused accessor to mutex
- 08:46 AM Revision 2daae54d (qgis): Attribute Form - value relation widget takes key again instead of value
- Corrected: Value relation widget update incorrectly tries to use value instead of key
The mapped key has to be set i... - 07:02 AM Feature request #11103: Support for retina displays (HiDPI)
- I would like to report that the problem is still here on MacOS, even on new QGIS3 (master build made by homebrew form...
- 07:02 AM Feature request #11103: Support for retina displays (HiDPI)
- I would like to report that the problem is still here on MacOS, even on new QGIS3 (master build made by homebrew form...
- 07:02 AM Feature request #11103: Support for retina displays (HiDPI)
- I would like to report that the problem is still here on MacOS, even on new QGIS3 (master build made by homebrew form...
- 07:02 AM Feature request #11103: Support for retina displays (HiDPI)
- I would like to report that the problem is still here on MacOS, even on new QGIS3 (master build made by homebrew form...
- 07:02 AM Feature request #11103: Support for retina displays (HiDPI)
- I would like to report that the problem is still here on MacOS, even on new QGIS3 (master build made by homebrew form...
- 06:36 AM Revision 0ccf6fa1 (qgis): Fix Z and M support for add point feature (fixes #17427)
- 06:36 AM Bug report #17427 (Closed): regression: editing Z value via note editor panel for memory point l...
- Applied in changeset commit:qgis|0ccf6fa1710108640f84192045026fd09d28af8b.
- 06:36 AM Bug report #17427 (Closed): regression: editing Z value via note editor panel for memory point l...
- Applied in changeset commit:qgis|0ccf6fa1710108640f84192045026fd09d28af8b.
- 04:28 AM Revision ba62ffce (qgis): Make constructors for QgsVectorLayer and QgsRasterLayer more flexible
- ...by moving extra arguments to new LayerOptions structs. This allows
us to more easily add new layer constructor opt... - 04:25 AM Bug report #17426: regression: adding new features to point/multipoint layers fails to render unt...
- The regression occurs with memory point layers having _no_ fields.
- 02:18 AM Revision 61b2f74a (qgis): Do not assume edit widget value changes on every signal
- Widgets may on initialisation send out a notification that the value changed (from invalid to something sensible).
T... - 02:17 AM Bug report #17425 (Closed): Complex forms: in the sidebar of embedded forms records display as if...
- Applied in changeset commit:qgis|61b2f74aae077d07e14b8d9619a4fa7f91514e5f.
- 02:17 AM Bug report #17425 (Closed): Complex forms: in the sidebar of embedded forms records display as if...
- Applied in changeset commit:qgis|61b2f74aae077d07e14b8d9619a4fa7f91514e5f.
- 02:17 AM Revision dca0dc1d (qgis): Fix crash when removing layers from running transactions
- qobject_cast no longer works when the QObject::destryed signal is being emitted
- 01:46 AM Revision 78622b48 (qgis): Merge pull request #5568 from m-kuhn/postgresDefaultValues
- [postgres] Fix default value check if evaluated server side
- 01:19 AM Revision b18c891d (qgis): [postgres] Fix default value check if evaluated server side
2017-11-08
- 12:35 AM Bug report #14932 (Reopened): "NULL" text in null field should disappear as soon as a field gets ...
- Reopened as this still happens in QGIS master (v2.99).
This happens in forms as well. You end up easily entering v... - 12:35 AM Bug report #14932 (Reopened): "NULL" text in null field should disappear as soon as a field gets ...
- Reopened as this still happens in QGIS master (v2.99).
This happens in forms as well. You end up easily entering v... - 12:35 AM Bug report #14932 (Reopened): "NULL" text in null field should disappear as soon as a field gets ...
- Reopened as this still happens in QGIS master (v2.99).
This happens in forms as well. You end up easily entering v... - 12:35 AM Bug report #14932 (Reopened): "NULL" text in null field should disappear as soon as a field gets ...
- Reopened as this still happens in QGIS master (v2.99).
This happens in forms as well. You end up easily entering v... - 12:35 AM Bug report #14932 (Reopened): "NULL" text in null field should disappear as soon as a field gets ...
- Reopened as this still happens in QGIS master (v2.99).
This happens in forms as well. You end up easily entering v... - 09:42 PM Revision cab807dc (qgis): Merge pull request #5426 from medspx/ProcessingPortGrass72
- [Processing] Port GRASS 7.2 algorithm provider
- 09:17 PM Revision e1ffb282 (qgis): QgsHighlight improvements
- * Doxygen improvements
* Fix unrequired casting
* Remove unrequired contructor - 09:15 PM Bug report #17427 (Closed): regression: editing Z value via note editor panel for memory point l...
- Editing of Z value via the node editor is broken for memory point layers created via the "new temporary scratch layer...
- 09:09 PM Bug report #17426 (Closed): regression: adding new features to point/multipoint layers fails to r...
- A regression slipped into the memory provider under QGIS master whereas added features to a point memory layer fails ...
- 07:43 PM Bug report #17425 (Closed): Complex forms: in the sidebar of embedded forms records display as if...
- Editing is not active in my case. I click on a feature with the identify tool and the form opens.
It is a complex ... - 07:19 PM Bug report #17292: Data Source Manager: WFS loads layer two time if you use the Add button, and t...
- In my opinion [Add] and [Close] is enough. But do as you (or others) prefer.
Thanks for fixing this feature ;-) - 02:50 PM Bug report #17292: Data Source Manager: WFS loads layer two time if you use the Add button, and t...
- This is a feature, not a bug.
BTW, I'm strongly considering to revert the commit that removed the "Close" button a... - 06:57 PM Bug report #17424 (Closed): QGIS always changed spatialite datasource (when closing a project) ev...
- Simplest way to reproduce:
# running @qgis spatialite.db@ with some spatialite data file.
# immediately closing Q... - 05:50 PM Revision d79ac26f (qgis): Fix build warning
- 05:49 PM Bug report #17201 (Feedback): QGIS master crashes when trying to expand a spatiaLite layer in the...
- 02:53 PM Bug report #17201: QGIS master crashes when trying to expand a spatiaLite layer in the DB manager
- Can we close this?
- 05:49 PM Bug report #15769 (Closed): Crash at QGIS exit related to OGR provider
- 03:26 PM Bug report #15769: Crash at QGIS exit related to OGR provider
- Cannot reproduce anymore
- 03:26 PM Bug report #15769: Crash at QGIS exit related to OGR provider
- Cannot reproduce anymore
- 05:46 PM Revision 140b9568 (qgis): Merge pull request #5467 from signedav/propertieslayout
- Propertieslayout Fields And Forms Redesign
- 04:53 PM Revision 0ba8f979 (qgis): no +/- buttons when not needed and some graphical finetuning
- scroll area for attribute type config, but no scroll area for whole tab
set attribute type config to invisible when a... - 03:57 PM Revision 7b427c6b (qgis): Don't quote symbol path in crash
- 03:29 PM Bug report #17423 (Open): QGIS select by expression mismatch with MSSQL layers
- 02:55 PM Bug report #17423: QGIS select by expression mismatch with MSSQL layers
- Works fine on this layer:
* PostgreSQL database with PostGIS extension
* key='gid'
* srid=25832
* type=MultiPoly... - 02:45 PM Bug report #17423 (Feedback): QGIS select by expression mismatch with MSSQL layers
- Does it happens for other providers (like PostGIS) or datasources? Can you test on a more recent release? Thanks.
- 02:07 PM Bug report #17423: QGIS select by expression mismatch with MSSQL layers
- Additional layer/field information:
The field "matrikelnummer" type is QString and typename is varchar. Max length 4... - 02:00 PM Bug report #17423 (Closed): QGIS select by expression mismatch with MSSQL layers
- When trying to select features using "select by expression", QGIS did select a wrong feature in this case.
I tried o... - 03:25 PM Revision be5a0c9a (qgis): Merge pull request #5556 from m-kuhn/crashOnHighlight
- No need to crash when a user wants a highlight
- 03:25 PM Bug report #17413 (Closed): Crash when using the identify tool in the "layer choice" mode
- Applied in changeset commit:qgis|dc7ec1e1ca927a9b45466df85e14fb4083f7b80e.
- 03:25 PM Bug report #17413 (Closed): Crash when using the identify tool in the "layer choice" mode
- Applied in changeset commit:qgis|dc7ec1e1ca927a9b45466df85e14fb4083f7b80e.
- 03:04 PM Revision 17c7e2fb (qgis): [3D] Fix missing Z support for point layers (#5560)
- 02:45 PM Bug report #17386 (Closed): Authentication manager behaves weird
- 02:37 PM Revision fd937c3a (qgis): Increase outline width
- 02:37 PM Revision 05868c21 (qgis): Add smoke test for QgsHighlight
- 02:37 PM Revision dc7ec1e1 (qgis): No need to crash when a user wants a highlight
- Fix #17413
- 02:37 PM Revision 42c9d158 (qgis): [test] Fix canvas size and background garbage
- 02:37 PM Revision 593bff2c (qgis): Add control images to highlight check
- 02:30 PM Bug report #17266 (Closed): Lines To Polygons, Polygonize and Refactor Fields change all attribut...
- 03:35 AM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
- Several tests today in QGIS show no problem joining Polygons-to_Lines output tables to other layers or joining an imp...
- 02:16 PM Revision 309b1c8f (qgis): [bugfix] Fixes QgsFileDownloader abort on error
- Backported from master 6b9b513
- 01:51 PM Bug report #17410 (Closed): Identify tool->download in a not authorised folder block qgis
- 01:51 PM Bug report #17410: Identify tool->download in a not authorised folder block qgis
- commit:6b9b513ea58c96a216cb79b24595eb0aa1405b3d
- 01:51 PM Bug report #17410: Identify tool->download in a not authorised folder block qgis
- commit:6b9b513ea58c96a216cb79b24595eb0aa1405b3d
- 01:44 PM Bug report #17410: Identify tool->download in a not authorised folder block qgis
- BOOM means... you'll see ;)
- 01:04 PM Bug report #17410 (In Progress): Identify tool->download in a not authorised folder block qgis
- 01:03 PM Bug report #17410: Identify tool->download in a not authorised folder block qgis
- Test case: commit:f06ea878b869f4f2baf2818ac1b4700eceaf3567
- 12:59 PM Bug report #17410: Identify tool->download in a not authorised folder block qgis
- Can you please clarify what does "BOOM" means?
I wrote a test case and it does pass on Linux (the downloader exit on... - 01:43 PM Revision 93396153 (qgis): Fix #17412 Sorting fixed, no troubles when editing after sorting
- Issue was, that the cellchange is triggered at re-sorting or renaming something in re-sorted table - so there was a b...
- 01:42 PM Bug report #17412 (Closed): Failed to rename field to "xxx", is the field name unique
- Applied in changeset commit:qgis|93396153bb6c427f4d48e167049f5f3b4e7ab058.
- 01:42 PM Bug report #17412 (Closed): Failed to rename field to "xxx", is the field name unique
- Applied in changeset commit:qgis|93396153bb6c427f4d48e167049f5f3b4e7ab058.
- 01:42 PM Revision ccd142fe (qgis): Correct order of column headers in relationmanager
- The column headers of "Referenced Field" and "Referenced Layer" were switched with respect to their content. Changed ...
- 01:42 PM Bug report #17409 (Closed): Project Properties - Relations: Column header switched
- Applied in changeset commit:qgis|ccd142fef68cff41c9474b10bd7f4a0f63efc4ab.
- 01:42 PM Bug report #17409 (Closed): Project Properties - Relations: Column header switched
- Applied in changeset commit:qgis|ccd142fef68cff41c9474b10bd7f4a0f63efc4ab.
- 01:33 PM Revision 6b9b513e (qgis): [bugfix] Fixes QgsFileDownloader abort on error
- Abort reply on error.
Fixes #171410
Requires backport - 01:01 PM Revision f06ea878 (qgis): Add a test case for unwriteable folders in file downloader
- Attempt to verify bug 17410 Identify tool->download in a not authorised folder block qgis
The test passes, so let's ... - 12:26 PM Revision e781ad2e (qgis): Merge pull request #5558 from elpaso/project_use_rw_context
- [bugfix] Project use rw context
- 12:26 PM Bug report #17116 (Closed): QGIS master saves always with absolute paths
- Applied in changeset commit:qgis|7aa24f69066ee26dec749940acadc7330511a86c.
- 12:26 PM Bug report #17116 (Closed): QGIS master saves always with absolute paths
- Applied in changeset commit:qgis|7aa24f69066ee26dec749940acadc7330511a86c.
- 12:25 PM Revision d11ea073 (qgis): Removed Q_UNUSED
- 12:20 PM Revision 87117a8b (qgis): [auth][bugfix] Tests for the new SSL key loading logic
- 12:16 PM Revision d09d7048 (qgis): [auth][bugfix] Import pvt keys with unknown file extension
- This fixes an unreported bug that prevent imports of
private keys with wrong/unknown extension.
The old logic relied... - 11:44 AM Bug report #17422 (Closed): Processing: overwrite existing outputs does not works in QGIS master
- Hi,
1) I tried to clip a line shapefile with polygon shapefile,
the output of clipping must overwite an old existin... - 10:28 AM Revision 84531009 (qgis): Fix histogram refreshig
- 10:24 AM Revision 1119dc89 (qgis): Merge pull request #5551 from pblottiere/reenable_wms_server_tests
- [travis] Re-enable WMS tests for server
- 10:18 AM Revision de33017b (qgis): Fix #17412 Sorting fixed, no troubles when editing after sorting
- Issue was, that the cellchange is triggered at re-sorting - so we need to check the names
Following issue was, that w... - 10:05 AM Revision 37802233 (qgis): Merge pull request #5553 from rldhont/release-2_18-layerdefinition-rela...
- [BUGFIX] Load layer from definition does not use qlr as relative path
- 10:05 AM Bug report #15656 (Closed): Loading QLR file with relative path does not work correctly
- Applied in changeset commit:qgis|533a8f8a4d018744541b35b388b060cb8a9e5499.
- 10:05 AM Bug report #15656 (Closed): Loading QLR file with relative path does not work correctly
- Applied in changeset commit:qgis|533a8f8a4d018744541b35b388b060cb8a9e5499.
- 09:44 AM Revision ab2603e5 (qgis): Re enable WMS server tests
- 09:44 AM Revision 24f38aba (qgis): Update some images/masks
- 08:08 AM Revision 1fdfecfc (qgis): Removed unused code
- 05:33 AM Bug report #17421 (Closed): processing: adding refactor fields alg into a model throws an error
- When trying to add refactor fields to a model, the following error is thrown at the user:...
2017-11-07
- 11:39 PM Revision 8ae1b624 (qgis): Immediately set focus on name line edit after clicking "new projection"
- Since it's most likely the very next thing the user wants to edit
- 11:36 PM Revision f68e4290 (qgis): When testing custom projections, show geographic results in degrees not...
- Fixes #7036
- 11:27 PM Bug report #17258: Custom CRS Definition dialog is unusable
- PR at https://github.com/qgis/QGIS/pull/5559
- 11:21 PM Revision 2d9b5738 (qgis): Make custom projections dialog a bit more user friendly
- ...by updating the list immediately when changes are made to the
current projection's name or definition. Previously ... - 11:13 PM Revision e45c2944 (qgis): Move 'copy crs' button to more logical place in dialog
- Since the copy is actually copying the definition OVER the
current crs definition (as opposed to adding a NEW custom
... - 11:06 PM Feature request #17420 (Open): Set text style of composer table on a per-cloumn basis
- It would be nice to have a more configurable table item in a composer.
So one can set font color etc. on a per-colum... - 11:04 PM Revision c8a62c5c (qgis): Fix bad logic in custom projections dialog (fixes #17258)
- 11:03 PM Feature request #17419 (Open): Add ability to edit rings in composer polygon item
- It's impossible to cut holes in composer polygon items making it pretty hard to mask out parts of other composer item...
- 10:52 PM Revision 108de771 (qgis): More use of unique_ptrs to simplify sqlite3 memory management
- 10:49 PM Revision 940c4ed5 (qgis): followup a1024905b
- 10:31 PM Revision 7d3e4917 (qgis): Safer sqlite3 memory management using unique_ptr subclass
- 10:21 PM Revision 61a155cf (qgis): Merge pull request #5547 from borysiasty/stickytabs2
- Make some QgsOptionsDialogBase's slots virtual
- 10:19 PM Revision 4677026c (qgis): Merge pull request #5532 from borysiasty/nopreloading
- [Plugin manager] [needs-doc] Don't preload all plugins for a test
- 10:16 PM Revision 30a1f87b (qgis): Minor cleanups
- 10:14 PM Revision 6143e6da (qgis): More formatting standardisation
- 10:13 PM Revision b5f64b30 (qgis): This isn't Fischer-Price "my first c++ program"
- 10:07 PM Revision 8f1eb7f8 (qgis): Fix gross indentation format
- 10:02 PM Bug report #17415 (Closed): Composer attribute table item can't be copied/pasted
- Duplicate of #10456
- 10:02 PM Bug report #17415 (Closed): Composer attribute table item can't be copied/pasted
- Duplicate of #10456
- 06:40 PM Bug report #17415 (Closed): Composer attribute table item can't be copied/pasted
- Simple to reproduce:
1. Add a new composer
2. Add an Attribute table item
3. Try to copy and paste it.
Item doesn... - 10:01 PM Bug report #17418 (Closed): UnicodeEncodeError when trying to create new layer with spatial index...
- I tried to upload a layer to PostGIS in the DB Manager and got the following error:...
- 09:44 PM Revision cb8fc686 (qgis): about translators: grey background, centered flags, replace flag for ge...
- 09:44 PM Revision 27dbb486 (qgis): fix override warning
- 09:44 PM Revision a1024905 (qgis): fix windows warnings
- 09:22 PM Bug report #17417 (Closed): Rule editor dialog (style) does not fit height of screen
- When using rule editor (for editing rules in styles) the dialog does not fit in 1366 x 768 screen. This results in th...
- 09:13 PM Bug report #17416 (Open): Crash on enabling 3D renderer for point layer
h2. User Feedback
Using OSGeo4W nightly, I load the airports sample layer, enable the 3D viewer, then "Enable 3D...- 07:48 PM Revision df8bda2f (qgis): Typo
- 07:15 PM Revision 96a81a95 (qgis): macOS needs to include spatialindex before geos.
- If both are on separate paths and geos is first, case-insensitive macOS will include (geos) spatialIndex.h instead of...
- 06:19 PM Revision 6046e8d1 (qgis): Test for relative/absolute paths in projects
- 06:17 PM Revision 7aa24f69 (qgis): [bugfix] Pass QgsReadWriteContext into project XML r/w
- Or we miss the path resolver and we do not read/write
relative paths correctly
Fixes #17116 - 05:30 PM Bug report #17414 (Closed): Extents for Rotated Map Incorrect
- In map composer, if a map is rotated (by 90 degrees, for example) the extents no longer report the correct X and Y Mi...
- 05:15 PM Revision ba243e55 (qgis): References #17412 Fixes problem when changeing sort but not when renaming
- When sort and then toggle edditing, the problem was that it wanted to rename all the fields
Whis is avoided now by ch... - 04:46 PM Bug report #17413: Crash when using the identify tool in the "layer choice" mode
- I should add that the Identify tool works fine if I change the mode from "Layer choice" to "active layer only".
- 04:44 PM Bug report #17413 (Closed): Crash when using the identify tool in the "layer choice" mode
- In current QGIS master (commit:07cef67ead) - when I use the Identify tool with the "layer choice" mode and "Automical...
- 04:36 PM Bug report #17201: QGIS master crashes when trying to expand a spatiaLite layer in the DB manager
- After using this solution https://gis.stackexchange.com/a/260679/4972
No crash and no errors anymore, seems pretty... - 04:19 PM Bug report #17412 (Closed): Failed to rename field to "xxx", is the field name unique
- When sorting the rows in the fields tab of the vector layer properties and accepting the dialog, an error message app...
- 04:13 PM Revision 8aa8c30b (qgis): Merge pull request #5555 from m-kuhn/fixRepresentValue
- Fix represent value
- 04:12 PM Bug report #17407 (Closed): represent_value expression fails
- Applied in changeset commit:qgis|5595f40fc6dc929250714e55d1e9ec5b58ad9918.
- 04:12 PM Bug report #17407 (Closed): represent_value expression fails
- Applied in changeset commit:qgis|5595f40fc6dc929250714e55d1e9ec5b58ad9918.
- 03:47 PM Revision 80ea446d (qgis): Make text translatable
- 03:47 PM Revision 77246136 (qgis): Add test
- 03:47 PM Revision 5595f40f (qgis): Fix single parameter version of represent_value
- Fix #17407
- 03:28 PM Revision 44d8db9c (qgis): editable and lable on top + fixes
- in attribute form properties: editable and lable on top config to general
fix: in case that somebody deletes a field ... - 03:19 PM Bug report #17347: MetaSearch: Add WMS/WMTS data button broken
- Looks like this part of the code needs updating based on the provider changes in master:
https://github.com/qgis/Q... - 03:03 PM Bug report #16495 (Closed): Creating a join freezes QGIS master if target layer attributes table ...
- Applied in changeset commit:qgis|07cef67eadf6f63970175dfe8588703e57c41f72.
- 03:03 PM Revision 07cef67e (qgis): Fix freeze when joining with table open
- Fix #16495
- 02:53 PM Revision e5187b29 (qgis): Respect default values in N:M relations
- 02:44 PM Bug report #17411 (Closed): New version of plugins from 3rd party repo does not appear
- There seems to be a problem with QGIS cache when reading data from 3rd party plugin repo.
The xml file shows there... - 02:35 PM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
- John Browne wrote:
> My concern is ability to join and otherwise use output tables with other layers. If feature ty... - 04:39 AM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
- I lack expertise to judge, but Internet search indicates qlonglong is integer (apparently integer 64 in Windows). My ...
- 01:29 PM Revision 2eddb03a (qgis): Merge pull request #5476 from tudorbarascu/move_feature
- Move Feature tooltip that guides the user towards Node Tool if s(h)e wants snapping
- 01:04 PM Bug report #17120: Missing namespace declaration when searching by bounding box
- To clarify, I've fixed this in OWSLib, but unable to reproduce how this would be an error in MetaSearch.
- 01:01 PM Bug report #17120: Missing namespace declaration when searching by bounding box
- I'm still unable to reproduce. Can you provide a CSW which demonstrates that the request is problematic?
- 10:31 AM Bug report #17120: Missing namespace declaration when searching by bounding box
- Tom Kralidis wrote:
> Given this is 2.8.6 I would say your best bet here is to either upgrade QGIS or update your un... - 12:57 PM Bug report #17410 (Closed): Identify tool->download in a not authorised folder block qgis
- tested on OSX (2.18.14) and Master linux
steps:
1) connect to a WMS service that allow download of data
2) visua... - 12:46 PM Revision 98f75087 (qgis): better wording
- 12:14 PM Bug report #17388: QGIS crashes on featureCount()
- Haven't tested it on master yet.
- 12:01 PM Bug report #17388: QGIS crashes on featureCount()
- This is 2.18 only, correct?
- 12:02 PM Bug report #17334: QGIS 2.99 - adding ArcGIS Map Server Layer crashed
- Can you please check if this issue has been solved with latest commits on master?
- 11:56 AM Revision a22e565d (qgis): Merge pull request #5552 from elpaso/vector_layer_safe_cast
- [bugfix] Prevent a bad crash when provider is wrong
- 11:56 AM Bug report #17155 (Closed): Crash when creating XYZ layer from python
- Applied in changeset commit:qgis|2523d7351cf166b15941edd707586951a30ed54b.
- 11:56 AM Bug report #17155 (Closed): Crash when creating XYZ layer from python
- Applied in changeset commit:qgis|2523d7351cf166b15941edd707586951a30ed54b.
- 09:29 AM Bug report #17155: Crash when creating XYZ layer from python
- Not fixable due to this cast: https://github.com/qgis/QGIS/blob/master/src/core/qgsvectorlayer.cpp#L1538
I don't kno... - 09:29 AM Bug report #17155: Crash when creating XYZ layer from python
- Not fixable due to this cast: https://github.com/qgis/QGIS/blob/master/src/core/qgsvectorlayer.cpp#L1538
I don't kno... - 10:56 AM Revision 533a8f8a (qgis): [PATCH] [BUGFIX] Load layer from definition does not use qlr as relativ...
- Fixes #15656 Loading QLR file with relative path does not work correctly
- 09:54 AM Bug report #15656: Loading QLR file with relative path does not work correctly
- A Pull Request is opened https://github.com/qgis/QGIS/pull/5553
- 09:26 AM Revision 2523d735 (qgis): [bugfix] Prevent a bad crash when provider is wrong
- Fixes #17155
- 08:57 AM Revision bb36fa7f (qgis): [bugfix] Use QgsApplication.authManager()
- instead of the old singleton
- 08:25 AM Revision 7c9cd491 (qgis): Merge pull request #5546 from elpaso/auth_migrate
- [auth][bugfix] Auth DB migrate
- 08:25 AM Bug report #17403 (Closed): Authentication DB is not migrated from 2 to 3
- Applied in changeset commit:qgis|7e699361615a618d628ce55b91f2e468142b52c9.
- 08:25 AM Bug report #17403 (Closed): Authentication DB is not migrated from 2 to 3
- Applied in changeset commit:qgis|7e699361615a618d628ce55b91f2e468142b52c9.
- 07:55 AM Bug report #16967: value relation widget with Allow multiple selection doesn't resolve the values...
- Sure!
I think instead of a dump and a project it's easier to just create the tables:... - 04:22 AM Revision c000cb86 (qgis): Merge pull request #5434 from nyalldawson/layout_next2
- [layouts] Port item type from composer
- 03:55 AM Revision e9e7740d (qgis): Merge pull request #5544 from nyalldawson/proc_api
- [processing] Improve api handling for provider format support
- 03:25 AM Revision bf75747f (qgis): [processing] Use user-set default file formats if supported by
- provider, otherwise fall back to a format which IS supported
by that provider - 02:53 AM Revision 36b58a8c (qgis): Fix duplicated return
- 02:51 AM Revision 90d6a2d0 (qgis): Update for changes in API
- 02:43 AM Bug report #14394: Tooltips are blank (2.14, 2.18)
- I tried _all_ styles, GTK+ is really the only one working for me, all the others have blank tooltips
- 02:38 AM Bug report #14394: Tooltips are blank (2.14, 2.18)
- I was wrong, changing style (to GTK2+ for example) _DOES_ fix the issue for me. I just failed to restart after change.
- 02:13 AM Bug report #14394: Tooltips are blank (2.14, 2.18)
- For the record: same problem with 2.18 on Ubuntu 17.04
Changing style does not seem to help (tried: Window, Plastiqu... - 02:32 AM Revision 272097b8 (qgis): Add a unit test
- 02:32 AM Revision 1bfed134 (qgis): Port picture item
- 02:32 AM Revision d3430e4d (qgis): Port legend item
- 02:32 AM Revision e5390223 (qgis): Restore serialization of picture items
- 02:32 AM Revision 585a8b70 (qgis): Restore ui for configuring labels
- 02:32 AM Revision 48a45b3b (qgis): Restore serialization for map items
- 02:32 AM Revision bc23664b (qgis): Serialization for legend items
- 02:32 AM Revision 27c3eb92 (qgis): More command compression for legend items
- 02:32 AM Revision 057a20cb (qgis): Allow adding multiple layers to legend at once
- 02:32 AM Revision 83f177c1 (qgis): Start porting label item
- 02:32 AM Revision 87d497eb (qgis): Fix undo/redo of newly added maps
- 02:32 AM Revision 72a1f770 (qgis): After a undo/redo action occurs, select the affected items
- 02:32 AM Revision 49c41d39 (qgis): Add missing override
- 02:32 AM Revision ce0ac40a (qgis): Add missing docs
- 02:32 AM Revision 69aacde1 (qgis): Fix failing tests
- 02:32 AM Revision 476b1dec (qgis): Fix doxygen warning
- 02:32 AM Revision c6d939f1 (qgis): Fix more tests
- 02:32 AM Revision 20b9d080 (qgis): Fix grid annotations, port tests
- 02:32 AM Revision cef5dbc0 (qgis): Cleanup undo strings
- 02:32 AM Revision b7e35261 (qgis): Use symbol buttons for grid symbols
- 02:32 AM Revision 44fe2a8d (qgis): Add tools to create node based items
- 02:32 AM Revision 938b2392 (qgis): Port more node tool actions
- 02:32 AM Revision ab7bb723 (qgis): Start work on node edit tool
- 02:32 AM Revision 9a08fad5 (qgis): Exclude selected nodes item when snapping during node move
- 02:32 AM Revision 420821fd (qgis): Fix correct frame bounding rects for shapes and node items
- 02:32 AM Revision 4e8483ec (qgis): [layouts] Fix polyline does not render purely horizontal/vertical lines
- 02:32 AM Revision 91c3b5d2 (qgis): Add a shortcut menu to items panel, with option to show
- item properties
Refs #11581 - 02:32 AM Revision 0143d0be (qgis): Add a signal to QgsLayoutContext when flags change
- 02:32 AM Revision 4e8878dc (qgis): Port item blend mode support to layouts
- 02:32 AM Revision 75898d8e (qgis): Port 'exclude from exports' functionality from composer
- 02:32 AM Revision 3678f01e (qgis): Port item opacity handling from composer
- 02:32 AM Revision 87ef5c52 (qgis): Allow cancelation of polygon/polyline creation
- 02:32 AM Revision c0b63a67 (qgis): After creating an item with the add item tool, switch immediately to se...
- 02:32 AM Revision ce79ff30 (qgis): Add refresh action for layouts
- 02:32 AM Revision 8629225a (qgis): Work on functional rotation for items
- 02:32 AM Revision 625eef80 (qgis): Fix resizing with mouse handles acts strangely when items have frames
- 02:32 AM Revision 9630a391 (qgis): [layouts] Nicer detection of rendering in a view
- In compositions, a flag must be explicitly set to indicate
whether the render occuring is for "previews" (i.e.
render... - 02:32 AM Revision edecc37c (qgis): Start work on exporter for layouts
- 02:32 AM Revision 9d04e679 (qgis): Prepare for map item porting
- 02:32 AM Revision 71c41d49 (qgis): Add export layer settings to QgsLayoutContext
- 02:32 AM Revision 23d0617b (qgis): Start porting map item
- 02:32 AM Revision 753f6f50 (qgis): Start hooking up map widget gui
- 02:32 AM Revision 4a1bcb32 (qgis): Revert automatic detection for preview renders
- Turns out there's no reliable way to differentiate widget
vs QImage based renders inside QGraphicsItems - 02:32 AM Revision 6f59965a (qgis): Fix double ownership issue causing crash when deleting layouts
- 02:32 AM Revision d92b067b (qgis): Add config widget for polygon/polyline items
- 02:32 AM Revision 7924aa19 (qgis): Fix regeneration of cached maps when zoom level changes
- 02:32 AM Revision cf7714b7 (qgis): Restore tests, add button to set page background in ui
- 02:32 AM Revision f524c80b (qgis): More shape porting
- 02:32 AM Revision 8ca6d3e7 (qgis): Refactor layout item gui registry to allow metadata for duplicate item ...
- This allows registration of item creation actions which create
items with an existing item type, but custom creation ... - 02:32 AM Revision 26dcf792 (qgis): Fix tests
- 02:32 AM Revision 7674bd74 (qgis): Cleanup item xml read/write, save shape properties
- 02:32 AM Revision 2ec31d84 (qgis): Add configuration widget for shapes
- 02:32 AM Revision b41fea90 (qgis): Fix layout items appear in random order in gui
- 02:32 AM Revision 783636df (qgis): Port polygon and polyline items to layouts
- 02:32 AM Revision 6b629e19 (qgis): Port snappedAngle from composer
- 02:32 AM Revision 53c87796 (qgis): Add method to create QgsRectangle from center and size
- 02:32 AM Revision 45ffb262 (qgis): Fix updating map extent on resize
- 02:32 AM Revision ab4606db (qgis): Start work on porting grid ui
- 02:32 AM Revision 835653bf (qgis): Fix crash on exit when layout designer open
- 02:32 AM Revision 332a69ce (qgis): Tweak default symbol for overviews
- 02:32 AM Revision aa2b73d4 (qgis): Use symbol button for overview frame symbol
- 02:32 AM Revision 8bc57f77 (qgis): Update map overview when linked map rotation changes
- 02:32 AM Revision 5016a452 (qgis): Expand unit tests for QgsLayoutItemComboBox
- 02:32 AM Revision 1f769da6 (qgis): Work on resurrecting overviews
- 02:32 AM Revision 5d5c858d (qgis): Start restoring grids/overviews
- 02:32 AM Revision 7f0142c8 (qgis): Working move item content tool
- 02:32 AM Revision b276f4c4 (qgis): Fix map item widget properties updating
- 02:32 AM Revision e836fc49 (qgis): When selecting a different item, but the item is the same
- type of item, just update the existing panel to show the new
item's properties
This means that flicking between sele... - 02:32 AM Revision 06650808 (qgis): Fix resize of grouped items with non-top left reference points
- 02:32 AM Revision d3836e50 (qgis): Move population of layout gui registry from GUI->app
- Since we don't want all the item type subclass config widgets
to have to reside in gui, we need to populate the regis... - 02:32 AM Revision b2414d8d (qgis): Start porting item properties widget
- 02:32 AM Revision 3735c7f0 (qgis): Small tweaks to selection behavior
- 02:32 AM Revision ea453beb (qgis): If the same item is reselected in a layout, don't create a new
- properties widget for it
Because if we do annoying things happen, like loss of focused
widget and scroll bar position - 02:32 AM Revision aebe5a42 (qgis): Allow reseting ratio manually for linked ratio lock buttons
- 02:32 AM Revision f69771ca (qgis): Add item properties to context menu
- 02:32 AM Revision ab4e6c11 (qgis): Fix resizing items with non-top-left reference point using mouse handles
- 02:32 AM Revision 29dfcc0d (qgis): Avoid temporary no-selection state when selecting a new item
- in layouts using mouse interactions
- 02:32 AM Revision 1c735d59 (qgis): Handle position and size with units and ratio lock in item properties
- 02:26 AM Revision edea38f7 (qgis): Merge pull request #5542 from nyalldawson/auth_manager_instance
- Fix crashes when no QgsApplication instance is available
- 02:21 AM Revision e3f34997 (qgis): Merge pull request #5541 from nyalldawson/thread_local
- Don't use thread_local on mingw or OpenBSD builds
- 02:21 AM Bug report #17351 (Closed): Link failure on OS without thread local storage
- Applied in changeset commit:qgis|265be41d7c1cb0bb9d39aac3285c2c8fb40ffa47.
- 02:21 AM Bug report #17351 (Closed): Link failure on OS without thread local storage
- Applied in changeset commit:qgis|265be41d7c1cb0bb9d39aac3285c2c8fb40ffa47.
- 01:40 AM Revision cc59ee44 (qgis): More build fixes
- 01:38 AM Revision e47479b3 (qgis): Mingw fixes
- 01:33 AM Revision 5ebd3983 (qgis): FreeBSD has thread_local support
- 01:26 AM Revision 89bfe402 (qgis): Fix build
- 01:25 AM Revision 5b9283fc (qgis): Use local statics
- 01:10 AM Revision 68f2c260 (qgis): Fix handling of transform-not-required in QgsCoordinateTransformContext
- 01:03 AM Revision 30046d6e (qgis): Merge pull request #5536 from lbartoletti/freebsd_build
- Fix FreeBSD build
2017-11-06
- 12:50 AM Revision 6384f1f2 (qgis): Fix failing test
- 09:06 PM Bug report #15656 (Reopened): Loading QLR file with relative path does not work correctly
- This issue has been fixed in master but not in LTR.
- 09:06 PM Bug report #15656 (Reopened): Loading QLR file with relative path does not work correctly
- This issue has been fixed in master but not in LTR.
- 09:06 PM Bug report #15656 (Reopened): Loading QLR file with relative path does not work correctly
- This issue has been fixed in master but not in LTR.
- 08:59 PM Revision ac1db7e6 (qgis): add SVG translation flags
- 07:22 PM Revision 3c9cef36 (qgis): item for source field fix
- 07:17 PM Bug report #17409 (Closed): Project Properties - Relations: Column header switched
- In the project properties - relations:
The column headers of "Referenced Field" and "Referenced Layer" are switched ... - 06:53 PM Revision c227a9e5 (qgis): layout and remove fieldproperties
- icons and made naming
inputs from the pull request
remove old fieldpropertie-stuff - 06:11 PM Revision c315eb3f (qgis): Reimplement QgsOptionsDialogBase::optionsStackedWidget_CurrentChanged i...
- 05:55 PM Revision 783e54fd (qgis): [Server] GetFeatureInfo: enhance raster data values displayed
- 05:45 PM Revision 6b76c2b3 (qgis): Missing docstrings
- 04:53 PM Revision c53996a8 (qgis): [Server] GetFeatureInfo: enhance raster data values displayed
- 04:53 PM Revision d09614cc (qgis): [BUGFIX][Server] GetFeaturInfo: do not identify raster data if point no...
- 04:49 PM Revision b57ec46a (qgis): getter return not-const list of errors
- 04:37 PM Revision 64ab28bf (qgis): Rename indx to index in some slots
- 04:34 PM Revision 7e2ee74d (qgis): help and suppress form
- help from attributetypedialog is handled over the help of vectorlayerproperties
suppress form combo takes the default... - 04:11 PM Bug report #17385: No auth-db saved
- No need to aplogise, there is no worse tester that a developer and that's why we need people like you that keeps test...
- 04:01 PM Bug report #17385 (Closed): No auth-db saved
- OK,
sorry for bothering you, seems to be my fault:
After completely removing my compile directory and freshly compi... - 03:27 PM Bug report #17385: No auth-db saved
- Trying to understand what could step in between: how are you managing the master password when asked to create it?
... - 03:26 PM Bug report #17385: No auth-db saved
- System Ubuntu 16.04 (64bit)
I realized that the "building guide":https://htmlpreview.github.io/?https://github.com/q... - 02:58 PM Bug report #17385: No auth-db saved
- Thanks for testing, unfortunately I still cannot reproduce this issue, all the a.m. tests are passing for me.
Wha... - 02:48 PM Bug report #17385: No auth-db saved
- Hi Alessandro,
bad news, it does not work any better today:
Alessandro Pasotti wrote:
>
> Test 1 (clean):
> -... - 09:41 AM Bug report #17385: No auth-db saved
- I've run some manual tests: so far so good, please repeat/verify on your local installation
Note: this is a clean ... - 03:52 PM Bug report #17408: Relation reference widgets randomly don't show the correct display value
- For some additional information, here are the exact build numbers I tested:
commit:edcaf05bcb (on Windows - issue ... - 03:38 PM Bug report #17408: Relation reference widgets randomly don't show the correct display value
- New finding:
On another machine, where the PostgreSQL database is on the same machine like QGIS as a client, the w... - 03:26 PM Bug report #17408: Relation reference widgets randomly don't show the correct display value
- I should add that in the attribute table I can always see the human-readable represent value as expected.
- 03:25 PM Bug report #17408 (Closed): Relation reference widgets randomly don't show the correct display value
- I have a form with 9 relation reference widgets.
With current master, these widgets randomly show either the inter... - 03:47 PM Bug report #16680 (Closed): Layers Panel: adding a layer doesn't simply show its name
- Yes it's.
- 03:16 PM Bug report #17407 (Closed): represent_value expression fails
- If I use the expression
represent_value("fieldname")
on a field that has a relation reference widget assigned, ... - 03:15 PM Bug report #16584 (Closed): QGIS crashes each time i hit OK from the Settings --> options dialog
- Closing given that I can not reproduce.
- 03:07 PM Bug report #16584 (Feedback): QGIS crashes each time i hit OK from the Settings --> options dialog
- Is this still an issue? I assume we would have a lot more feedback here if this was still an issue, as there are a lo...
- 03:09 PM Revision af576004 (qgis): const range loop iterators
- 03:05 PM Bug report #16967: value relation widget with Allow multiple selection doesn't resolve the values...
- Tudor, any chance you can provide a sample database and project?
- 02:41 PM Revision 72c97f38 (qgis): [Server] GetFeatureInfo: enhance raster data values displayed
- 02:27 PM Revision 966e2d66 (qgis): Make QgsOptionsDialogBase's slots virtual for overriding in derived cla...
- 02:26 PM Feature request #17406 (Open): Enable custom color (ie expression or virtual attribute) to define...
- Good Moring,
In order to create reports with maps and table from the print composer, we would like to highlight so... - 02:21 PM Revision 52240ad7 (qgis): fixed problem with saving first entry
- 01:48 PM Bug report #17403: Authentication DB is not migrated from 2 to 3
- patch: https://github.com/qgis/QGIS/pull/5546
- 12:50 PM Bug report #17403: Authentication DB is not migrated from 2 to 3
- Working on implementation
- 11:00 AM Bug report #17403 (Closed): Authentication DB is not migrated from 2 to 3
- The settings migration routine does not copy the qgis-auth.db file from .qgis2 to the new default profile
- 01:29 PM Revision 2c0d5188 (qgis): some changes in attribute form properties and source data properties
- changed style of layout, initcode and suppress-combo
display read only comment
fixed saving of wfs
improved layout
so... - 01:05 PM Bug report #17405 (Closed): LayerBoard Plugin crashed
- You must report this to the plugin author. Cheers!
- 01:05 PM Bug report #17405 (Closed): LayerBoard Plugin crashed
- You must report this to the plugin author. Cheers!
- 01:04 PM Bug report #17405 (Closed): LayerBoard Plugin crashed
- LayerBoard Plugin crashed when I run them.
There is a massage log.
2017-11-06T13:01:26 1 Traceback (most recent c... - 12:54 PM Revision d9b4ae56 (qgis): Minor change: QString -> QStringLiteral in some debug messages
- 12:47 PM Revision 7e699361 (qgis): [auth][bugfix] Migrate qgis-auth.db from QGIS 2 to 3
- Fixes #17403
- 12:42 PM Revision cd23779e (qgis): [auth][bugfix] Add a getter for error list on qgsmigrate
- 12:10 PM Revision 926ac905 (qgis): Improve caching of transforms
- 11:42 AM Bug report #17056: exporting categorized symbology to sld then importing results in all features ...
- I found that when the "other" filter class is listed first in class list this class is not overwriting the other clas...
- 11:42 AM Bug report #17056: exporting categorized symbology to sld then importing results in all features ...
- I found that when the "other" filter class is listed first in class list this class is not overwriting the other clas...
- 11:32 AM Bug report #17175: Relation reference widget triggers SQL syntax error with UUID fields in Postgres
- I found a workaround. Just casting uuid fields to text seems to work.
- 11:23 AM Bug report #17404: Windows does not show unicode characters
- !https://issues.qgis.org/attachments/download/11639/image001.png!
- 11:22 AM Bug report #17404 (Feedback): Windows does not show unicode characters
- For constraint reporting unicode characters are used but they show up as ? on Windows.
It's probably a font issue. - 11:03 AM Revision 17aa88cd (qgis): [Plugin manager] Fix window title
- 11:00 AM Bug report #17386: Authentication manager behaves weird
- I filed #17403 myself
- 09:56 AM Bug report #17386: Authentication manager behaves weird
- @Andreas, there is really a lot of things going on here and I need more information to track this down:
- are ther... - 10:59 AM Bug report #17402 (Closed): Authentication settings for WMS/WFS etc. are not migrated from 2 to 3
- WMS/WFS etc. settings are migrated but the authentication configuration settings for the connections are not.
- 10:55 AM Bug report #17397 (Closed): Save vector as CSV does not add x,y columns anymore
- 09:39 AM Bug report #17397: Save vector as CSV does not add x,y columns anymore
- Tested in QGIS 2.18.14 and works indeed as expected.
Issue solved. Thank you. - 10:30 AM Revision ae33b58a (qgis): Merge pull request #5533 from DelazJ/pluginlist
- [bugfix]Remember the c++ plugins folders in Options dialog
- 10:16 AM Bug report #17401 (Closed): GetFeatureInfo does not work with spaces encoded as '+'s
- The QWC2 web client, and possibly other OGC clients, encode spaces as '+'s. QGIS Server (master) does not support tha...
- 10:12 AM Bug report #17400 (Closed): GetFeatureInfo "Layer not found" error
- QGIS Server returns "Layer not found" errors on GetFeatureInfo queries with out-of-scale layers.
This is the query... - 10:05 AM Bug report #17399 (Closed): GetPrint "Invalid width/height parameters" error
- I get an error when attempting to print from QWC2:...
- 09:43 AM Bug report #17384 (Closed): Authentication API broken missing documentation
- 09:04 AM Revision 9e00db85 (qgis): Fix build
- 08:51 AM Revision 4e6ff411 (qgis): Move caching to QgsCoordinateTransform
- and remove no longer required QgsCoordinateTransformCache singleton
- 08:14 AM Revision 9984f39b (qgis): Prepare for removal of QgsCoordinateTransformCache
- 07:36 AM Revision fd772709 (qgis): Remove QgsDatumTransformStore
- and port usage over to QgsCoordinateTransformContext instead
- 07:15 AM Revision 71f84f77 (qgis): Tweak transform logic (only remove src/dest transforms when both transf...
- 06:18 AM Revision ee59abf0 (qgis): Improved out of process crash handler (#5543)
- * Add out of process crash handler for better crash handling.
- 05:22 AM Revision 257278f0 (qgis): Add transform context to QgsMapSettings and QgsRenderContext
- And also throw warnings when the context isn't set for these objects
- 05:12 AM Revision 6a6e81f5 (qgis): Move warning to better location
- 04:46 AM Revision 30604ed4 (qgis): Add explicit setter for project's transform context
- And add transformContextChanged signal, so that we can detect
when the context is changed. - 04:09 AM Revision 24cd1443 (qgis): Remove context-unaware QgsCoordinateTransform constructors from Python ...
- This forces Python code and plugins to become datum transform
aware, and given that upgrading python code is easy (ju... - 04:09 AM Revision a88dcdf5 (qgis): In debug builds, throw a warning when transforming coordinates
- and no coordinate transform context has been set.
- 04:09 AM Revision cd41d708 (qgis): Add a QgsCoordinateTransformContext member to QgsProject
- 04:09 AM Revision b06a9b92 (qgis): Add support for serializing transform contexts
- 04:09 AM Revision c46d7dc8 (qgis): Implement logic for calculating datum transforms to use
- 04:09 AM Revision a79957cf (qgis): Remove unused QgsCoordinateTransform::readXml/writeXml methods
- These methods are not used in master and are of questionable
value. Better to serialise the source and dest crs separ... - 04:09 AM Revision 76c3005b (qgis): QgsCoordinateTransformContext must be thread safe
- 04:09 AM Revision 35b96bec (qgis): QgsCoordinateTransformContext is implicitly shared
- 04:09 AM Revision 140482f5 (qgis): Doxygen
- 04:09 AM Revision be95b79b (qgis): Allow removing existing transforms from context
- 04:09 AM Revision ae3538cf (qgis): Start on QgsCoordinateTransformContext
- Stores settings related to the correct datum transforms to use
when performing a coordinate transform. - 04:09 AM Revision b6bb1e09 (qgis): Add QgsCoordinateTransformContext arguments to QgsCoordinateTransform c...
- And automatically retrieve correct datum transforms for the
transform, based on the information in the context.
Also... - 03:58 AM Revision 4e3b0825 (qgis): Restrict available formats when running algorithms to those supported
- by the provider
- 03:44 AM Revision 4ae9241e (qgis): [processing] Allow providers to determine default vector/raster file
- to use for their algorithm's parameters
Because some providers do not have support for all output types,
we need to ... - 03:00 AM Revision 2a280d69 (qgis): Allow access to parent algorithm for processing parameters
- 01:51 AM Revision ca0c8302 (qgis): Add missing QCoreApplication for TestQgsNoApplication
- 01:19 AM Revision 2eff873e (qgis): Fix crash when accessing QgsApplication::dataItemProviderRegistry()
- without QgsApplication instance.
Also add test to ensure that calling QgsApplication::initQgis()
is safe to do witho... - 01:13 AM Revision c413f147 (qgis): Fix crash when accessing auth manager when no QgsApplication is available
2017-11-05
- 12:45 AM Bug report #17351: Link failure on OS without thread local storage
- Updated PR at https://github.com/qgis/QGIS/pull/5541
- 12:20 AM Revision 265be41d (qgis): Don't use thread_local on mingw or OpenBSD builds
- MingW has broken support for thread_local, so force disabling it
see
https://sourceforge.net/p/mingw-w64/bugs/445/
ht... - 11:59 PM Revision 7cfbb6fb (qgis): Add Matrix as a way to get in touch with community for chat (#5147)
- 11:56 PM Revision 31f98dac (qgis): Merge pull request #5534 from nyalldawson/format
- Add flags to QgsVectorFileWriter methods which return lists of drivers
- 11:31 PM Revision bfe03553 (qgis): Disable flaky PyQgsServerAccessControl test
- 11:26 PM Revision d269f34b (qgis): Fix build using mingw
- Changes many #if defined (Q_OS_WIN) to #ifdef _MSC_VER, where
they relate specifically to msvc compiler - 11:25 PM Revision 2df53324 (qgis): Optimise QString equality tests
- 11:03 PM Revision 394c5315 (qgis): Update for nose2 0.7.0
- 10:54 PM Revision 473af0c9 (qgis): Rename CONTRIBUTE.md to CONTRIBUTING.md
- 10:49 PM Revision 8499d7fc (qgis): Add option to hide non-spatial formats from driver lists
- And hide non-spatial formats from geometry checker available formats
- 10:43 PM Revision 5523b059 (qgis): [Bugfix] Enable adding color in Options->Color tab
- 10:34 PM Revision fe056600 (qgis): More QPair API removal
- 10:22 PM Revision d855f7f3 (qgis): Remove redundant '[OGR'] string from dialogs
- 10:22 PM Revision dc341d20 (qgis): Add flags to QgsVectorFileWriter methods which return lists of drivers
- Initially only flag available is whether to sort drivers by
recommended order. The recommended order puts GPKG first ... - 10:22 PM Revision a4ef7e42 (qgis): Avoid use of QPair and instead use a struct
- 10:21 PM Revision eb6f64ee (qgis): Fix build
- Followup 24e6366, readd missing flag
- 09:22 PM Bug report #17398 (Closed): dbmanager reports python error while expand spatialite db to see the ...
- Fixed in commit:24e636681
- 09:22 PM Bug report #17398 (Closed): dbmanager reports python error while expand spatialite db to see the ...
- Fixed in commit:24e636681
- 06:19 PM Bug report #17398 (Closed): dbmanager reports python error while expand spatialite db to see the ...
- In dbmanager, SpatiaLite, doubleclick on a sqlite database produce a python error and you can`t connect to database a...
- 09:03 PM Revision 24e63668 (qgis): mod_spatialite added to osgeo4w
- 08:50 PM Revision 71b9c77b (qgis): Fix FreeBSD build
- On FreeBSD, I need to change `selectedFilter = fileDialog-
>selectedFilter();` to `selectedFilter = fileDialog-
>sele... - 08:02 PM Revision 67dc3187 (qgis): Add some const and renaming
- 07:24 PM Revision ff2a53c5 (qgis): Update PyQtMacros module to handle removal of name option from pyrcc5
- 04:02 PM Revision fbcc48ec (qgis): Remove Q_FOREACH and 'my' prefix for variable
- 04:01 PM Revision 4c3b16a4 (qgis): Remove some Q_FOREACH
- 03:46 PM Bug report #17385: No auth-db saved
- The problem occurs in Windows also. No qgis-auth.db is saved, even in completely fresh profile.
- 01:52 PM Revision da904771 (qgis): Improve input detection and add new algorithms
- 01:18 PM Revision d10aaf4b (qgis): Support multiple output file raster formats:
- * A new createopt textbox has been added to the parameters dialog for algorithms which exports to raster files.
* A n... - 09:45 AM Bug report #17397: Save vector as CSV does not add x,y columns anymore
- I will test in 2.18.14 and report back here.
- 09:40 AM Bug report #17397 (Feedback): Save vector as CSV does not add x,y columns anymore
- I just tried on 2.18.14 and works as expected.
- 09:40 AM Bug report #17397 (Feedback): Save vector as CSV does not add x,y columns anymore
- I just tried on 2.18.14 and works as expected.
- 04:18 AM Revision d8b671d9 (qgis): Silence warning
2017-11-04
- 11:27 PM Revision 9e27362b (qgis): [bugfix]Remember the c++ plugins folder in Options dialog
- and enable the remove button
- 10:55 PM Revision a8f46652 (qgis): [Plugin manager] Remove dead code
- 10:47 PM Bug report #17397 (Closed): Save vector as CSV does not add x,y columns anymore
- Since QGIS 2.18, when exporting a point layer as a marker separated text file (.csv), no x and y columns are added to...
- 10:46 PM Revision cfec339c (qgis): [Plugin manager] [needs-doc] Don't preload plugins for a test if they a...
- 06:34 PM Revision aa17df1a (qgis): * Add new GRASS 7.2 algorithms.
- * Fix ParameterRange GUI.
* Fix Multiple values Enum support. - 05:55 PM Revision 29c71f43 (qgis): Fix updating QgsApplication::libraryPaths; load before any Qt plugin use
- Previously, it was happening after setting the default window icon.
For macOS, refactor libraryPaths update to ensur... - 04:13 PM Revision 9269200a (qgis): [Geometry Checker] Improve displayed messages by indicating the layer t...
- 03:43 PM Revision fbd11ca9 (qgis): [Geometry Checker] Use a more readable format list
- and save file format in settings
- 03:31 PM Revision 65f483d6 (qgis): Modify Grass7 detection
- 03:31 PM Revision 6c81895f (qgis): Improve GRASS provider:
- - Improve GRASS detection for all OS.
- Use GRASS --exec command.
- Unified GRASS batch job method for all OS (easier... - 03:31 PM Revision c63df209 (qgis): Fix cz function
- 03:31 PM Revision 74826dc1 (qgis): Support directory output via QgsProcessingParameterFolderDestination
- 03:31 PM Revision b46e9693 (qgis): Fix indentation
- 03:31 PM Revision be781534 (qgis): (WIP) Grass algorithms can be opened and inputs are treated
- 03:31 PM Revision d6fb7181 (qgis): Fix layers loading...
- 03:31 PM Revision 4b8b6a09 (qgis): Massive conversion
- 03:31 PM Revision 6bf8448b (qgis): Improve cell size detection and FileDestinationOutput (but not perfect)
- 03:31 PM Revision 5827513c (qgis): First work on ext mechanism factorisation
- 03:31 PM Revision 7369c4de (qgis): Fix some other description files
- 03:31 PM Revision 9eff16f4 (qgis): Finish fixing description files (no more errors on startup)
- 03:31 PM Revision a676db2c (qgis): Handle parameters and update description files (WIP)
- 03:31 PM Revision f32bba44 (qgis): (WIP) better cellsize suport
- 03:31 PM Revision f0da7b01 (qgis): Improve MultiLayers and FileDestination support
- 03:31 PM Revision 9a52e344 (qgis): First working raster algorithm
- 03:31 PM Revision 483a4b9e (qgis): First functional version (for single vector inputs/outputs)
- 03:31 PM Revision 297c7b5f (qgis): Update TODO list
- 03:31 PM Revision 733218ca (qgis): (WIP) enable Grass7 provider and start to work on QgsProcessing new fra...
- 03:31 PM Revision 56b963e3 (qgis): Improve ext scripts and support OutputFolder
- 10:46 AM Revision 206fdbda (qgis): Disable talkative wms server test
- 10:46 AM Revision edcaf05b (qgis): Add missing import for test
- 10:46 AM Revision d57fc361 (qgis): [travis] Enable server tests
- 09:44 AM Revision 670dd0e5 (qgis): Avoid using extended unicode in source files
- Hopefully fixes Windows issues with those
- 08:38 AM Revision c936e270 (qgis): Merge pull request #5217 from KentPorter-Boundless/master
- New icon for Data Source Manager button
2017-11-03
- 11:35 PM Bug report #16720: Pyspatialite in QGIS 3 crash
- Andreas, see my answer to your question at GIS.SE: https://gis.stackexchange.com/a/260679/4972
- 04:50 PM Bug report #16720: Pyspatialite in QGIS 3 crash
- I am very sorry, but what is meant by "load the extension"?
My old way was:
@from pyspatialite import dbapi2 as sql... - 01:13 AM Bug report #16720: Pyspatialite in QGIS 3 crash
- Andreas Kositz wrote:
> Does fixed mean, pyspatialite was removed? How do I access or create SpatiaLite Layer using ... - 11:23 PM Revision a2e306e5 (qgis): Added approved icon for Data Source Manager.
- 10:10 PM Revision 33d422b4 (qgis): Merge pull request #5518 from nyalldawson/interp
- Start on unit tests for interpolation classes
- 09:30 PM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
> * The middle table (output) differs from the top (input) table in both field Length and Precision, and changes Ty...- 08:46 PM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
- Thank you for pursuing this. My installation's "processing" folder location is C:\Program Files\QGIS 2.18\apps\qgis\p...
- 08:46 PM Bug report #17266: Lines To Polygons, Polygonize and Refactor Fields change all attributes to str...
- Thank you for pursuing this. My installation's "processing" folder location is C:\Program Files\QGIS 2.18\apps\qgis\p...
- 07:16 PM Revision 22a7b92d (qgis): [Plugin installer] Fix broken warning about outdated plugin updates in ...
- 07:12 PM Revision fb7f8f17 (qgis): [Plugin installer] Fix broken warning about outdated plugin updates in ...
- 06:35 PM Revision 92ce3be3 (qgis): Merge pull request #5524 from boundlessgeo/basic_cas_backport
- [bugfix][auth] Basic method uses trusted CAs when connecting to DB
- 06:22 PM Revision 67b1cab3 (qgis): Merge pull request #5414 from m-kuhn/transactionStack
- Deal with failure to create savepoint
- 05:50 PM Revision 3fab1404 (qgis): [bugfix][auth] Basic method uses trusted CAs when connecting to DB
- Fixes #17392
Backport of Basic auth CAs fix from master - 05:23 PM Revision 61e421d7 (qgis): [BUGFIX][Server] GetFeaturInfo: do not identify raster data if point no...
- 04:44 PM Revision 479970ba (qgis): Do not crash if there is no savepoint
- 04:33 PM Bug report #16680: Layers Panel: adding a layer doesn't simply show its name
- Seems it's fixed now, isn't it?
- 04:23 PM Bug report #17392: Additional Certification Authorities are ignored when connecting to postgis wi...
- I'll backport to 2.18
- 02:57 PM Bug report #17392 (Closed): Additional Certification Authorities are ignored when connecting to p...
- Applied in changeset commit:qgis|73fec4adc7f07b8a7e5acb3758a8eb3e97337c0f.
- 02:57 PM Bug report #17392 (Closed): Additional Certification Authorities are ignored when connecting to p...
- Applied in changeset commit:qgis|73fec4adc7f07b8a7e5acb3758a8eb3e97337c0f.
- 10:58 AM Bug report #17392 (Closed): Additional Certification Authorities are ignored when connecting to p...
- See attached failing test.
When connecting to PG the provider does not add trusted CAs to the connection and ignor... - 04:02 PM Revision c177995e (qgis): Disable PG auth tests
- 03:44 PM Revision 70cb2495 (qgis): Developers map: remove Name and Status terms
- 03:38 PM Bug report #17201: QGIS master crashes when trying to expand a spatiaLite layer in the DB manager
- Gerhard Spieles wrote:
> Same Problem
> Database ist attached
The "problem" changed, now QGIS does not crash any... - 03:29 PM Feature request #17396 (Open): add space between grid frame and map in composer
- Many maps have a space between the graticule frame and the map. It would be really useful to have this as a configura...
- 03:28 PM Bug report #17395 (Closed): Fields of memory layers are renamed automatically by the translation
- *Steps to reproduce*
Requires the german version of QGIS.
1. Create a vector memory layer through PyQGIS
2. Ad... - 02:56 PM Revision c9ee3ef3 (qgis): [auth] Tests for Basic method uses trusted CAs
- 02:55 PM Revision 73fec4ad (qgis): [bugfix][auth] Basic method uses trusted CAs when connecting to DB
- Fixes #17392
- 02:51 PM Revision 081f00e7 (qgis): Developers map: Link to GIT account for each dev
- 02:44 PM Revision 09f9bb76 (qgis): Developers map: more descriptive status for each dev
- 02:15 PM Bug report #17387 (Open): MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Submitted as PR 5521.
https://github.com/qgis/QGIS/pull/5521 - 01:37 PM Feature request #17394 (Open): Add other anchors to non-fixed annotations
- In the status quo, annotations can be set to have no fixed map position. Then they are always displayed in the same l...
- 01:22 PM Revision 9c5ace09 (qgis): duplicate feature default action if feature id given, then only copy on...
- 01:22 PM Revision adc884b0 (qgis): visibility of the new duplicate selected feature default action
- 01:22 PM Revision 64f9eb7a (qgis): Default Action with Python to Duplicate selected features. Visible for ...
- 01:07 PM Bug report #17393: Annotations without fixed map position move along when panning
- Oh, I forgot to add that when creating the annotation, "Map position fixed" has to be unchecked.
- 01:06 PM Bug report #17393 (Closed): Annotations without fixed map position move along when panning
- Steps to reproduce:
1. Add a map annotation.
2. Pan the map by holding down the middle mouse button and dragging.... - 11:27 AM Bug report #17384: Authentication API broken missing documentation
- fixed in commit:da8a5f4532f75cd12cd3d9490f23dfc9a6f9c9f0
- 11:26 AM Revision da8a5f45 (qgis): Added QgsApplication::authManager() to API break docs
- 10:39 AM Bug report #17391 (Open): icon size preview is kept when not selected in Options menu
- If I hover the the different icon sizes in the Options menu, the icons change size as expected. But if I move away th...
- 09:58 AM Revision 5a316a6a (qgis): silence astyle version check
- 09:58 AM Revision 8f5468af (qgis): crash fix
- 08:37 AM Feature request #17390 (Open): Layer definition file - default order bottom of layer list...
- See:
https://lists.osgeo.org/pipermail/qgis-user/2017-October/041023.html
Currently adding a layer from a layer... - 08:27 AM Feature request #17389 (Open): Translatable strings: ensure a space is added after a colon (:) ch...
- Would be nice to have in the prepare-commit script a check that a colon character is followed by a blank space before...
- 08:24 AM Revision 71eeda7b (qgis): Fix crash with hidden dock widget
- Fixes #17357
Fixes #17279
Fixes #17317 - 08:24 AM Bug report #17317 (Closed): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel called...
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 08:24 AM Bug report #17317 (Closed): mProxyModel is nullptr when QgsBrowserDockWidget::refreshModel called...
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 08:24 AM Bug report #17279 (Closed): Working with QgisBrowser widget makes my QGIS crash more often
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 08:24 AM Bug report #17279 (Closed): Working with QgisBrowser widget makes my QGIS crash more often
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 08:24 AM Bug report #17357 (Closed): Crash when adding a new network-based data source in data source manager
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 08:24 AM Bug report #17357 (Closed): Crash when adding a new network-based data source in data source manager
- Applied in changeset commit:qgis|71eeda7b454ee1b83a9c63d96b2332ae5dde0ac4.
- 07:36 AM Bug report #17357: Crash when adding a new network-based data source in data source manager
- Probably crash on DB Manager opening is related to this bug:
Thread 1 "qgis.bin" received signal SIGSEGV, Segmenta... - 08:07 AM Revision 61fa8da8 (qgis): Start on unit tests for interpolation classes
- 05:00 AM Revision fe78611c (qgis): Simplify interpolation API
- Don't require both pixel size and row/col count in constructor,
since we can calculate the pixel size from the extent... - 02:50 AM Revision 10c9bb6d (qgis): Merge pull request #5512 from nyalldawson/interp
- Cleanup and optimise interpolation code
- 02:02 AM Revision b36dd121 (qgis): Fix build
- 01:49 AM Revision 86314720 (qgis): QgsTINInterpolator->QgsTinInterpolator
- 01:45 AM Revision e94733f2 (qgis): Remove redundant interpolation classes
- 01:33 AM Revision bee2a1a8 (qgis): Update Python code
- 01:29 AM Revision 7d015efd (qgis): Tighten API
- 01:21 AM Revision 5a8e351b (qgis): Remove fragile and inefficient wkb re-parsing from TIN interpolator
2017-11-02
- 12:18 AM Revision e91ee5b7 (qgis): More flexible API for interpolation
- E.g. adds API support for interpolating by m value
- 11:47 PM Bug report #17388 (Closed): QGIS crashes on featureCount()
- Easy to reproduce: Start QGIS, open up python console and type in:...
- 10:47 PM Revision 73306f12 (qgis): Update python code
- 10:42 PM Revision f200d9c8 (qgis): Cleanup interpolation code
- 10:42 PM Revision cb292c18 (qgis): Greatly simplify and optimise interpolation code, correct handling of
- Z/M dimensioned geometries
- 10:42 PM Revision fd7ffad5 (qgis): Update api break docs
- 10:42 PM Revision 28ee4408 (qgis): Standardise enum capitalization and formatting
- 10:42 PM Revision b369ef85 (qgis): Use QgsFeatureSources instead of QgsVectorLayer for interpolation
- source layers
- 10:42 PM Revision 60e98be8 (qgis): Pass QgsFeedback to methods in interpolation for more responsive
- cancelation and progress reports
- 09:06 PM Revision 151fb087 (qgis): Merge pull request #5511 from borysiasty/settings
- Move plugin installer's settings to the [app] section
- 08:55 PM Revision ac12258e (qgis): * include python runtime dependencies in INSTALL (followup e9d2fd67)
- * also update INSTALL.html (run t2tdoc target; followup 8dfa0217d)
- 06:57 PM Bug report #16892: Processing in osgeo4w: ImportError: No module named expat; use SimpleXMLTreeBu...
- Just drop my osgeo4w64 folder and reinstall it. I still get the issue. Note that it begins by a "Couldn't load plugin...
- 12:44 PM Bug report #16892 (Feedback): Processing in osgeo4w: ImportError: No module named expat; use Simp...
- Just installed qgis-dev on osgeo4w and can't see this issue.
- 06:42 PM Bug report #16720: Pyspatialite in QGIS 3 crash
- gcarrillo - wrote:
> This was fixed with the help of Jürgen F.
>
> See commit:6402160526e3176d1d41f422d6ecab59aa... - 04:39 PM Bug report #17385: No auth-db saved
- I didn't fiddle around with profiles until now, so that's what I did:
# In _Settings_ I chose _User Profiles_ - _New... - 04:27 PM Bug report #17385: No auth-db saved
- @Bernhard - can you try creating a new, virgin profile, change to it and see if auth-manager works fine there?
In ... - 04:05 PM Bug report #17385: No auth-db saved
- yes, thanks!
- 03:49 PM Bug report #17385: No auth-db saved
- This is written to the Linux console if starting QGIS from there:
@WARNING: Auth db query exec() FAILED
Warning: vo... - 03:33 PM Bug report #17385: No auth-db saved
- Can you please attach the logs?
- 03:30 PM Bug report #17385: No auth-db saved
- maybe I should add this is code revision 1ffc3fd
more details: I did not have a @qgis-auth.db@ in the first place, s... - 03:15 PM Bug report #17385 (Closed): No auth-db saved
- master does not save an auth-db:
# go to _Settings - Options- Authentication_
# click on the + Button to add a new ... - 04:39 PM Bug report #17357: Crash when adding a new network-based data source in data source manager
- Interesting new finding:
If I create a new, virgin profile and use that, the crashes are gone.
Perhaps some old... - 04:15 PM Bug report #17386: Authentication manager behaves weird
- When opening a new QGIS profile, authentication manager works fine.
Perhaps this is a migration issue with an old ... - 03:54 PM Bug report #17386: Authentication manager behaves weird
- If I run the Python code
QgsApplication.authManager().authenticationDatabasePath()
the result is
'/home/an/.... - 03:51 PM Bug report #17386: Authentication manager behaves weird
- If I open the qgis-auth.db file in QGIS and have a look in the table auth_configs there is an entry with the correct ...
- 03:40 PM Bug report #17386: Authentication manager behaves weird
- maybe linked to #17385
- 03:38 PM Bug report #17386 (Closed): Authentication manager behaves weird
- Issue Nr 1: Already at QGIS startup I get two warnings:
WARNING: QGIS authentication Auth query exec() FAILED
WAR... - 04:04 PM Bug report #17384 (Open): Authentication API broken missing documentation
- 03:24 PM Bug report #17384: Authentication API broken missing documentation
- Add information about QgsApplication.authManager() and that the instance has been removed
- 03:23 PM Bug report #17384: Authentication API broken missing documentation
- please leave this open until I fix the documentation, I'll do it quickly, I promise :)
- 03:20 PM Bug report #17384: Authentication API broken missing documentation
- on my behalf we can but should keep in mind to add the info on the site listing api breaks (or do we need a new ticke...
- 03:18 PM Bug report #17384: Authentication API broken missing documentation
- Can we close this?
- 03:16 PM Bug report #17384: Authentication API broken missing documentation
- seperate issue opened, see #17385
- 02:52 PM Bug report #17384: Authentication API broken missing documentation
- It's the only method: QgsAccessManager cannot be accesed directly anymore.
Can you please open a separate issue fo... - 02:46 PM Bug report #17384: Authentication API broken missing documentation
- Allesandro, is @QgsApplication.authManager()@ the recommended method for QGIS3?
But the Python problem is minor, the... - 02:40 PM Bug report #17384 (Feedback): Authentication API broken missing documentation
- 02:39 PM Bug report #17384: Authentication API broken missing documentation
- Nothing is broken: the API has changed, I'll complete the docs but for now: just do `QgsApplication.authManager()`
- 02:34 PM Bug report #17384 (Closed): Authentication API broken missing documentation
- I cannot convince freshly compiled current master commit:1ffc3fd to save an authentication database.
Furthermore the... - 03:58 PM Bug report #17387: MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Giovanni Manghi wrote:
> Better submit the patch as a pull request on github, otherwise here it won't be noticed/rev... - 03:56 PM Bug report #17387 (Feedback): MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Better submit the patch as a pull request on github, otherwise here it won't be noticed/reviewed.
- 03:55 PM Bug report #17387 (Closed): MSSQL provider fails to load UNIQUEIDENTIFIER fields
- Experienced in *QGIS 2.18.12, 2.18.14* on Windows 8.1. (Code still present in master branch, but 2.99 crashes before ...
- 03:53 PM Bug report #17370 (Open): point parameter bug in processing batch process
- Patrick Palmier wrote:
> If you don't use it in batch mode but in normal mode and if you set a output text file (fi... - 03:51 PM Bug report #17370: point parameter bug in processing batch process
- If you don't use it in batch mode but in normal mode and if you set a output text file (fichier_matrice), the script...
- 02:53 PM Bug report #17370: point parameter bug in processing batch process
> 2017-11-02T14:34:50 1 Traceback (most recent call last):
> File "C:/PROGRA~1/QGIS2~1.18/apps/qgis/./python/...- 02:41 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
I just installed the 2.18.14 version and I still have the same error
Please find the filled parameters s... - 02:10 PM Bug report #17370: point parameter bug in processing batch process
- Just tried on 2.18.14 on both Linux and Windows and (not in batch mode) running the tool (with the parameters as you ...
- 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 01:55 PM Bug report #17370: point parameter bug in processing batch process
- Hello,
To reproduce the bug run the script matrice.py as batch process (in normal mode it works. It crashes only i... - 12:24 PM Bug report #17370 (Feedback): point parameter bug in processing batch process
- Please add the script, the data and the error message.
- 03:31 PM Revision d21d45b7 (qgis): basics of new dialog for the initcode python functionalities
- means, some cosmetic changes should still be done in qgsattributesforminitcode.ui
- 03:26 PM Revision 8dfa0217 (qgis): fixup ccache install instruction in doc files using txt2tags
- 02:49 PM Bug report #17332: QGIS unable to save a layer with measures
- TJ Rockefeller wrote:
> I have not. I just recently joined this bug tracker site to report this, so I don't know wha... - 02:45 PM Bug report #17332: QGIS unable to save a layer with measures
- I have not. I just recently joined this bug tracker site to report this, so I don't know what you mean by the dev mai...
- 02:38 PM Bug report #17332: QGIS unable to save a layer with measures
> Hopefully this answers your question clearly enough. Let me know if you have any other questions.
thanks. Have...- 02:19 PM Bug report #17332 (Open): QGIS unable to save a layer with measures
- A layer with measures is any geometry type with an "M" in the name like PointM, PointZM, LineStringM, LineStringZM, e...
- 11:44 AM Bug report #17332 (Feedback): QGIS unable to save a layer with measures
- Sorry for the dumb question... what is a layer "with measures"?
- 01:45 PM Revision 1fd4b638 (qgis): Fix relation reference widget model out of sync
- Causes crashes in some situations
- 01:19 PM Bug report #17383 (Closed): Tooltips have low contrast on Ubuntu 17.10
- After installing Qgis 2.18 on Ubuntu 17.10, I am having difficulty reading the tooltips. The foreground/background co...
- 01:07 PM Bug report #17379: WMS layers not rendered in Composer - 2.18.14-16
- How does it not crash with the print composer but does crash with the preview image?
Isn't the print composer pote... - 10:59 AM Bug report #17379: WMS layers not rendered in Composer - 2.18.14-16
- yes, it could be safe,the patch commit:b3ea17f3e2e8d430775d545bc624650ef3654766 would avoid to enter in draw call cre...
- 02:32 AM Bug report #17379: WMS layers not rendered in Composer - 2.18.14-16
- Matthias - based on this i think we should back out commit:fde62409, and then kill that option to create raster previ...
- 12:59 PM Bug report #17368 (Feedback): Cannot delete a value in a field of type "External resource"
- Can't replicate on 2.18.14 or I don't understand how to replicate.
- 12:55 PM Bug report #17362: Node Tool Selects Invisible Objects
- I'm pushing this to master as I don't really see anyone fixing this in 2.18 at this point.
- 12:55 PM Bug report #17375 (Feedback): Print Composer ignores width values from expression
- what about 2.18.14/master?
- 12:54 PM Bug report #17266 (Feedback): Lines To Polygons, Polygonize and Refactor Fields change all attrib...
- John Browne wrote:
> My test finds that the problem persists in QGIS Desktop 2.18.14 for Windows 64-bit, which incl... - 12:54 PM Bug report #17266 (Feedback): Lines To Polygons, Polygonize and Refactor Fields change all attrib...
- John Browne wrote:
> My test finds that the problem persists in QGIS Desktop 2.18.14 for Windows 64-bit, which incl... - 12:40 PM Bug report #16018 (Closed): Processing: numeric field are discarded and replaced with zero
- 12:38 PM Bug report #17382 (Closed): QGIS can't start with scipy > 0.17
- On Ubuntu Linux, I have installed scipy 0.18 via pip. After installing the latest version of scipy (> 0.17), QGIS fai...
- 12:34 PM Bug report #16911: Spatial query plugin and disjoint operator is wrong
- Spatial Query plugin is not maintained. Use Processing (Select By Location, Extract By Location) instead, these algor...
- 12:32 PM Bug report #17298 (Open): Processing: gdal merge python error on QGIS 3
- 12:25 PM Bug report #17353 (Closed): DB Manager TypeError on PostGIS loading
- 12:23 PM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS
> Anyway, if you feel there's still a need for precision, and that the otf behavior is clear and consistent enough ...- 11:49 AM Feature request #17381 (Open): Action's short name not consistently used
- A layer's action can have a _description_ (api: @name@) and a _short name_ (api: @shortTitle@).
In layer and canvas ... - 11:44 AM Bug report #17253 (Closed): The canvas and the composer are overlaid in the canvas
- 11:43 AM Bug report #17359 (Feedback): crash while enabling 'on the fly' CRS transformation
- Tested on 2.18.14 and cannot replicate. By the way "wgs84" is usually the the crs referred to the one having epsg 432...
- 11:36 AM Revision c3716474 (qgis): attribute editor layout selection etc.
- 11:26 AM Feature request #4069: Enhancement: ability to search for a plugin to run
- Alister, Doesn't the new locator bar (on the status bar) help find them?
- 11:12 AM Bug report #17314 (Open): export to dxf format - z dimension
- 11:12 AM Bug report #17374 (Feedback): QGIS elevation interpolation from sprayer RTK data in agriculture
- What is the problem with your data? I can interpolate the elevation values without any issue with many of the availab...
- 11:12 AM Bug report #17374 (Feedback): QGIS elevation interpolation from sprayer RTK data in agriculture
- What is the problem with your data? I can interpolate the elevation values without any issue with many of the availab...
- 11:12 AM Bug report #17374 (Feedback): QGIS elevation interpolation from sprayer RTK data in agriculture
- What is the problem with your data? I can interpolate the elevation values without any issue with many of the availab...
- 10:32 AM Revision c336fee4 (qgis): translation string fixes
- 10:21 AM Revision 1ffc3fd1 (qgis): set feature when starting action on attribute edit form
- 09:15 AM Revision 4b6228d8 (qgis): Move plugin installer's settings to the [app] section
- 09:12 AM Revision 90546b0d (qgis): final relation cardinality combobox
- 09:02 AM Revision 5ffbb359 (qgis): disable translation of mime types in raster layer properties
- 08:56 AM Revision 8bfa3ebd (qgis): Log when savepoint creation fails
- 08:30 AM Revision b9c57269 (qgis): Update tsstat.pl
- fix small typo
- 03:21 AM Feature request #17380 (Closed): Add sort option to processing "incremental field" algorithm
- Allow a custom sort order to use when generating the incremental id
2017-11-01
- 12:41 AM Bug report #17379 (Closed): WMS layers not rendered in Composer - 2.18.14-16
- WMS layers are not rendered in Print Composer in QGIS 2.18.14-2 (code revision 9d4ab51ee1) - OSGeo4W 64bits.
To re... - 12:06 AM Feature request #4069: Enhancement: ability to search for a plugin to run
- Got it.
- 11:42 PM Feature request #4069: Enhancement: ability to search for a plugin to run
- Borys Jurgiel wrote:
> I guess this ticket is (and will be) only applicable to Processing plugins.
No, it is spe... - 11:18 PM Feature request #4069: Enhancement: ability to search for a plugin to run
- I guess this ticket is (and will be) only applicable to Processing plugins.
As now Processing is implemented, is th... - 11:41 PM Feature request #17378 (Open): Settings migration can only rename groups, not change the grouping
- The settings migration can rename groups like in your example:
Qgis/connections-xyz/*;/qgis/connections-xyz/*
h... - 11:08 PM Revision 5fe43efe (qgis): Merge pull request #5509 from borysiasty/settings
- Remove dead code
- 11:01 PM Bug report #17377 (Closed): QgsSettings::beginGroup() is superior to QgsSettings::Section
- 11:00 PM Bug report #17377 (Closed): QgsSettings::beginGroup() is superior to QgsSettings::Section
- Just a simple example:
QgsSettings settings;
settings.begingGroup( "my_group" );
settings.setValue( "my_key", 7... - 10:40 PM Bug report #17376 (Feedback): QgsSettings::beginGroup() is superior to QgsSettings::Section
- Just a simple example:
QgsSettings settings;
settings.begingGroup( "my_group" );
settings.setValue( "my_key", 7... - 10:20 PM Revision c3e2adce (qgis): Const fixes for QgsSearchWidgetWrapper
- 10:20 PM Revision 5d2c39bb (qgis): Add doxymentation
- 10:20 PM Revision 69a28d82 (qgis): MOC compatible SIP_ABSTRACT version
- New version supports the following notation
class QgsOutClass : public QObject // SIP_ABSTRACT
MOC does not lik... - 10:20 PM Revision 295a578e (qgis): Make text translatable
- 10:20 PM Revision e0c1f0b0 (qgis): Fix abstract MOCed class generation
- 10:13 PM Revision 7dc48f3a (qgis): Merge pull request #5508 from DelazJ/message_spacing
- Fixing messages displayed in GUI
- 09:53 PM Revision 2d30c115 (qgis): Remove dead code
- 09:50 PM Bug report #15475: Tooltip on status bar>coordinates wrong
- Hello,
I looked into as it seems a very easy fix.
Alas, it was already fixed in commit:3059dd548073c0dd2816058f26... - 09:11 PM Bug report #17355 (Closed): Circular string (and new derived map tools) doesn't honor rubberband ...
- 07:38 PM Bug report #17357: Crash when adding a new network-based data source in data source manager
- Here is another backtrace from Linux:
---------------------------
QGIS died on signal 11[New LWP 12157]
[New LWP... - 06:32 PM Revision ac6c598f (qgis): Merge branch 'master' of github.com:qgis/QGIS
- 05:59 PM Bug report #17369 (Closed): NetCDF file crashing on load (UTM projection with grid_mapping)
- I realized that I had two versions of GDAL.
- I had GDAL 1.11 on my Ubuntu machine, and it is not compatible with... - 05:24 PM Bug report #17375 (Closed): Print Composer ignores width values from expression
Hello. I found strange thing.
I have a project where lines width is calculated with such expression:
@"width_co...- 05:03 PM Revision 08889c77 (qgis): Followup fix to ab74991; add missing QFile import
- 04:42 PM Bug report #17374 (Closed): QGIS elevation interpolation from sprayer RTK data in agriculture
- Here's the issue you wanted to look over. I think that RTK data from agriculture would have a lot of potential, as it...
- 03:49 PM Bug report #17373 (Closed): Some missing dependencies before compilation QGIS in Ubuntu Artful
- Fixed in commit:e9d2fd676df1
- 03:24 PM Bug report #17373 (Closed): Some missing dependencies before compilation QGIS in Ubuntu Artful
- Hello, can anyone add this dependencies in official install steps? https://github.com/qgis/QGIS/blob/master/INSTALL#L...
- 03:48 PM Bug report #17371 (Closed): Problem
- Fixed in commit:e9d2fd676df1
- 03:48 PM Bug report #17371 (Closed): Problem
- Fixed in commit:e9d2fd676df1
- 03:12 PM Bug report #17371: Problem
- Jorge Useche wrote:
> Jürgen Fischer wrote:
> > Apparently you Qt is not installed/configured correctly. Did you ... - 03:02 PM Bug report #17371: Problem
- Jürgen Fischer wrote:
> Apparently you Qt is not installed/configured correctly. Did you set QT_SELECT=5?
I don... - 10:30 AM Bug report #17371 (Feedback): Problem
- Apparently you Qt is not installed/configured correctly. Did you set QT_SELECT=5?
- 09:22 AM Bug report #17371 (Closed): Problem
- I'm using the instructions of https://github.com/qgis/QGIS/blob/master/INSTALL#L186 to compile QGIS 3 in Ubuntu Artfu...
- 03:46 PM Revision e9d2fd67 (qgis): add qt5-default to debian/ubuntu dependency list in INSTALL
- 12:48 PM Bug report #17314: export to dxf format - z dimension
- with points it works fine but not with lineString geometry, even force include z-dimension option on export operation...
- 12:08 PM Bug report #17351: Link failure on OS without thread local storage
- Nyall Dawson wrote:
> Does 2.18.13 work ok? Maybe QThreadStorage doesn't work on bsd either...
2.18.13 & 14 work ... - 07:04 AM Bug report #17351: Link failure on OS without thread local storage
- PR and discussion at https://github.com/qgis/QGIS/pull/5504
- 11:49 AM Bug report #14752 (Open): GEOS exceptions crash QGIS on windows
- 11:48 AM Revision 90834203 (qgis): More unit tests
- 11:48 AM Revision f4d3152e (qgis): [ogr] Also discard features with empty geometries
- when feature request specifies a filter rect
OGR sometimes returns a feature with empty geometry (e.g.
a multipolygo... - 11:48 AM Revision eea155d6 (qgis): Fix crash when attempting to render multipolygon with missing exterior ...
- This commit fixes a possible crash when the vector layer renderer
attempts to render a multipolygon containing a poly... - 11:48 AM Bug report #17365 (Closed): regression: QGIS crash while handling geometry in provided dataset
- Applied in changeset commit:qgis|eea155d6e28bbe3d66dd32e972d7c0472bbf3af4.
- 11:48 AM Bug report #17365 (Closed): regression: QGIS crash while handling geometry in provided dataset
- Applied in changeset commit:qgis|eea155d6e28bbe3d66dd32e972d7c0472bbf3af4.
- 11:15 AM Bug report #17298 (Feedback): Processing: gdal merge python error on QGIS 3
- @python@ should point to python3 when run from QGIS3:...
- 11:04 AM Bug report #17132: Errors when running QGIS algorithms with inputs with geometry errors
- > This dataset
>
> https://issues.qgis.org/attachments/download/11567/TestForBugs.zip
>
> causes the buffer too... - 10:45 AM Revision 6418a831 (qgis): remove remaining references to pyspatialite (followup 39816cf84)
- 10:24 AM Feature request #17372 (Open): SUpport for multi-geometry WFS
- Webservice: https://geodata.nationaalgeoregister.nl/kadastralekaartv3/wfs?request=GetCapabilities
A well-used WFS we... - 10:18 AM Revision 8105b750 (qgis): Fix issue 17355
- 07:52 AM Revision db54b4ea (qgis): fix windows build
- 06:58 AM Bug report #17370 (Closed): point parameter bug in processing batch process
- Hello,
I'm writing script with processing tool.
When I used a point parameter the script works well, but when I run... - 04:43 AM Revision 18785da4 (qgis): make use of the pin icon in recent projects menu
2017-10-31
- 11:58 PM Bug report #17364: svg marker symbol: relative path broken
- > Finally it is the question of whether to use just the path resolver or project. If we use QgsProject, we get more p...
- 08:35 AM Bug report #17364: svg marker symbol: relative path broken
- Yeah you are right, we will need access to QgsPathResolver or QgsProject in rendering. The other question is how do w...
- 05:02 AM Bug report #17364: svg marker symbol: relative path broken
- Martin - I had a quick look at this, and I don't believe it's resolvable without either adding the project instance a...
- 04:45 AM Bug report #17364 (Closed): svg marker symbol: relative path broken
- For quite a long time now under QGIS master (what will become 3.0), providing a relative path for an SVG marker (thro...
- 11:48 PM Bug report #17365: regression: QGIS crash while handling geometry in provided dataset
- PR at https://github.com/qgis/QGIS/pull/5501
- 07:38 AM Bug report #17365: regression: QGIS crash while handling geometry in provided dataset
- I get a crash under linux (ubuntu 17.10) running gdal 2.2.1, as well as under windows (osgeo4w QGIS dev) running gdal...
- 06:45 AM Bug report #17365: regression: QGIS crash while handling geometry in provided dataset
- This patch fixes the crasher, however I do not know if it's the right way to handle this: https://github.com/nirvn/QG...
- 06:31 AM Bug report #17365 (Closed): regression: QGIS crash while handling geometry in provided dataset
- QGIS simply dies when trying to open the attached geojson dataset.
*Steps to reproduce*
# Create a new project, ... - 11:44 PM Bug report #16133 (Closed): Wrong default extension picked for table outputs
- 07:08 PM Bug report #16133: Wrong default extension picked for table outputs
- Confirmed. I think we can close this issue. Thanks
- 10:07 PM Bug report #17369 (Closed): NetCDF file crashing on load (UTM projection with grid_mapping)
- QGIS closes completely when opening the file without saying why.
It opens fine with GDAL and xarray.
NCDUMP:
`... - 09:32 PM Revision 8afbaebd (qgis): Merge pull request #5482 from rduivenvoorde/create_WITH_CLANG_TIDY-take2
- adding WITH_CLANG_TIDY as advanced, so you can build without it even …
- 08:10 PM Bug report #16892: Processing in osgeo4w: ImportError: No module named expat; use SimpleXMLTreeBu...
- Anyone has an idea here? This issue prevents me to have a working Processing in my windows computer. Note that I can ...
- 07:21 PM Revision 48d43d37 (qgis): Merge pull request #5497 from nyalldawson/svg_crash
- Fix crashes and issues with SVG rendering
- 07:21 PM Bug report #13565 (Closed): modifying a svg already cached doesn't invalidate the cache, renders ...
- Applied in changeset commit:qgis|0b2de85fe74d992b2f38b71df152b9c20ede1c7a.
- 07:21 PM Bug report #13565 (Closed): modifying a svg already cached doesn't invalidate the cache, renders ...
- Applied in changeset commit:qgis|0b2de85fe74d992b2f38b71df152b9c20ede1c7a.
- 07:21 PM Bug report #17077 (Closed): QGIS Crashes when using SVG marker for point layer in map units or wi...
- Applied in changeset commit:qgis|a6eea7205c72a1be837ab43b79aad0c67a92a9b2.
- 07:21 PM Bug report #17077 (Closed): QGIS Crashes when using SVG marker for point layer in map units or wi...
- Applied in changeset commit:qgis|a6eea7205c72a1be837ab43b79aad0c67a92a9b2.
- 01:55 AM Bug report #17077: QGIS Crashes when using SVG marker for point layer in map units or with rotation
- PR at https://github.com/qgis/QGIS/pull/5497
- 07:21 PM Bug report #17089 (Closed): concurrent rendering of a single SVG picture freezes / crashes QGIS
- Applied in changeset commit:qgis|a6eea7205c72a1be837ab43b79aad0c67a92a9b2.
- 07:21 PM Bug report #17089 (Closed): concurrent rendering of a single SVG picture freezes / crashes QGIS
- Applied in changeset commit:qgis|a6eea7205c72a1be837ab43b79aad0c67a92a9b2.
- 01:55 AM Bug report #17089: concurrent rendering of a single SVG picture freezes / crashes QGIS
- PR at https://github.com/qgis/QGIS/pull/5497
- 07:21 PM Bug report #16643 (Closed): Core dump when zooming
- Applied in changeset commit:qgis|942f431f0f6c9d3a38f6a9b3b8984bb5b29e12bb.
- 07:21 PM Bug report #16643 (Closed): Core dump when zooming
- Applied in changeset commit:qgis|942f431f0f6c9d3a38f6a9b3b8984bb5b29e12bb.
- 01:54 AM Bug report #16643: Core dump when zooming
- PR at https://github.com/qgis/QGIS/pull/5497
- 05:50 PM Bug report #17357: Crash when adding a new network-based data source in data source manager
- Below is a stacktrace from the Windows crashlog dialogue:
-------------------------
Crash ID: 1f8f6c1a26644c723... - 04:10 PM Bug report #17355: Circular string (and new derived map tools) doesn't honor rubberband line widt...
- In progress in "master":https://github.com/qgis/QGIS/pull/5499
- 04:06 PM Bug report #17368 (Closed): Cannot delete a value in a field of type "External resource"
- Once you have set a value in the field "External resource" you cannot unset it.
I mean there is not button to remov... - 03:48 PM Bug report #17367 (Closed): Offset tool doesn't honor snapping configuration
- This tool (maybe others?) have a "hardcoded":https://github.com/qgis/QGIS/blob/8b7fd5428f2d3eb6f4377a57f1f34f51fda3a9...
- 03:28 PM Bug report #17300: Aggregate functions in Field Calculator in modeller
- I can confirm this bug on 2.18.14
- 03:25 PM Bug report #16720 (Closed): Pyspatialite in QGIS 3 crash
- This was fixed with the help of Jürgen F.
See commit:6402160526e3176d1d41f422d6ecab59aa7ac68d, commit:6415fad0728... - 03:04 PM Revision 8b7fd542 (qgis): [Globe] Port for QgsGeometry::constGet API changes
- 02:27 PM Bug report #17353: DB Manager TypeError on PostGIS loading
- ref. #16533
- 02:20 PM Revision 192d6f93 (qgis): Update Attr Table after field calculation: fixes #17312
- 02:20 PM Bug report #17312 (Closed): Attribute Table refresh issue using the Quick Field Calculation Bar
- Applied in changeset commit:qgis|192d6f93d03efa785d9d96e04a71afd82dcbc1b2.
- 01:48 PM Revision 9d4ab51e (qgis): Clear WMS preview image
- 01:45 PM Revision fde62409 (qgis): Do not paint WMS preview images. Because it crashes.
- Fix #16803
- 01:45 PM Bug report #16803 (Closed): Segmentation fault with 'Create raster icons' on and loading a WMS
- Applied in changeset commit:qgis|fde624099552816f1c5133edc7b3576adf8d2257.
- 01:45 PM Bug report #16803 (Closed): Segmentation fault with 'Create raster icons' on and loading a WMS
- Applied in changeset commit:qgis|fde624099552816f1c5133edc7b3576adf8d2257.
- 11:45 AM Revision 5f750e72 (qgis): Fix connection
- 10:47 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS
- Yes sorry Loïc it has been merged meanwhile. I use in the doc the exact wording as in the commit in code. And i'm not...
- 09:04 AM Bug report #17277: Atlas - filter attribute table return empty table if layers haven't the same CRS
- Hi,
Harrissou, I can't see your PR but anyway. I think we need a better precision in the doc. It's writed " the fe... - 09:16 AM Bug report #17279: Working with QgisBrowser widget makes my QGIS crash more often
- Andreas and Richard, if this is still an issue I'd be glad to look into that next week during the bug-fixing sprint.
- 09:10 AM Bug report #17366 (Closed): Remove old settings for vertex markers
- Hi,
I think that the collabsilegroupbox Vertex markers (Settings->Digitizing->vertex markers) should be removed (e... - 08:57 AM Bug report #17253: The canvas and the composer are overlaid in the canvas
- Hi Giovanni,
You can close this report.
The overlay was due because the pdf was inserted into the canvas. Why? ... - 08:10 AM Revision 6f9798b8 (qgis): Merge pull request #5477 from boundlessgeo/certs_not_removed_with_pki_p...
- [security] Set permission to certs to allow correct removing on win
- 07:30 AM Bug report #17325: QGIS 2.99 with Network Analysis Error
- Should be fixed in the next nightly release. Some things to note:
1. Your road network has small gaps, so you'll n... - 07:27 AM Bug report #17325 (Closed): QGIS 2.99 with Network Analysis Error
- Applied in changeset commit:qgis|8f22f5eb3b7ad277b6ef2061ef91d1085c133d4a.
- 07:27 AM Bug report #17325 (Closed): QGIS 2.99 with Network Analysis Error
- Applied in changeset commit:qgis|8f22f5eb3b7ad277b6ef2061ef91d1085c133d4a.
- 07:28 AM Revision 87643e9c (qgis): Harden taskmanager tests
- By using local variables and functions interdependency of the tests is decreased
- 07:27 AM Revision 5000f9aa (qgis): Merge pull request #5488 from nyalldawson/network
- [processing] Fix some issues with network analysis shortest path algs
- 07:12 AM Revision 9a1cd9dd (qgis): [welcome page] avoid vertical shift when pinning/unpinning projects
- 07:01 AM Revision 05ad0bc0 (qgis): Update API break dox
- 07:01 AM Revision dbe2b340 (qgis): Update copyright date
- 07:01 AM Revision 284c4d35 (qgis): Fix tests
- 07:01 AM Revision 2bdc323d (qgis): More test tolerance
- 07:01 AM Revision 57edec66 (qgis): Fix incorrect enum values in network analysis algs
- Didn't result in a bug, but made the code confusing to read
- 07:01 AM Revision 8f22f5eb (qgis): [processing] Misc fixes for network analysis tools
- Also maintain attributes in service area from layer alg, add test
Fixes #17325 - 07:01 AM Revision 8d32bf72 (qgis): Fix QgsGraphAnalyzer::dijkstra traverses through edges backwards
- This means that it flips the direction of the graph edge, breaking
route restrictions.
Refs #17325 - 07:01 AM Revision 199b5692 (qgis): Fix broken network analysis network tolerance option
- The tolerance option was not correctly calculated, resulting in
semi-random behavior for networks which relied on a n... - 07:00 AM Revision ae8dc1cf (qgis): Optimise and simplify tie point calculation
- 07:00 AM Revision ab05fe76 (qgis): Fix extremely confusing network graph API naming
- Since names of api calls were backwards to expectations
- 07:00 AM Revision 8a68a410 (qgis): Simplify overly complex code
- 07:00 AM Revision b337335e (qgis): Start unit tests for network analysis lib
- 07:00 AM Revision 4149da05 (qgis): Better reporting of errors when paths cannot be found, also
- output point but with no geometry and missing attributes so
that it's clear which points could not be linked - 07:00 AM Revision 5ffd7214 (qgis): [processing] Shortest path handling for multipoint layers
- Fixes shortest path algorithms fail for multipoint source layers
or layers with null geometries
Refs #17325 - 07:00 AM Revision 49254384 (qgis): Fix index out of range error in shortest path algs
- 07:00 AM Revision 36a38f4e (qgis): [processing] Keep attributes from start/end points layer in
- output layer for shortest path algorithms
Otherwise the paths are nearly impossible to link back to
the source layer... - 04:54 AM Bug report #17298: Processing: gdal merge python error on QGIS 3
- I've looked into this - I don't believe this is a QGIS issue, but rather an osgeo4w packaging issue. The issue is tha...
- 04:23 AM Revision d1d95b1d (qgis): [welcome page] reverse chronological order for pinned projects
- 03:36 AM Bug report #17266 (Reopened): Lines To Polygons, Polygonize and Refactor Fields change all attrib...
- My test finds that the problem persists in QGIS Desktop 2.18.14 for Windows 64-bit, which includes two patches. Hopin...
- 03:27 AM Bug report #17351: Link failure on OS without thread local storage
- Actually you're missing bits:
QPair<projPJ, projPJ> QgsCoordinateTransform::threadLocalProjData() const
{
mPro... - 03:12 AM Revision 0b2de85f (qgis): Check file modified time when retrieving svg images from cache
- If file has been modified since the cache, regenerate a new cache
image.
We don't want to check the file modified ti... - 01:46 AM Bug report #12344 (Closed): SVG Symbols not showing up Style Manager
- If I understand correctly - this is a workflow issue, not a QGIS issue.
Adding svg paths to QGIS will make them av... - 01:46 AM Bug report #12344 (Closed): SVG Symbols not showing up Style Manager
- If I understand correctly - this is a workflow issue, not a QGIS issue.
Adding svg paths to QGIS will make them av... - 01:46 AM Bug report #12344 (Closed): SVG Symbols not showing up Style Manager
- If I understand correctly - this is a workflow issue, not a QGIS issue.
Adding svg paths to QGIS will make them av... - 01:43 AM Revision b07f6757 (qgis): Cleanup QgsSvgCache API
- - Remove QgsSvgCacheEntry from public API (is an internal detail only)
- Modernize code
- Make protected QgsSvgCache ... - 01:39 AM Feature request #16255 (Closed): way to avoid loss of non-core svg folders during upgrade
- Closing this as a "wont-fix". I think it needs to be resolved by either:
1. Creating a custom install package whic... - 01:39 AM Feature request #16255 (Closed): way to avoid loss of non-core svg folders during upgrade
- Closing this as a "wont-fix". I think it needs to be resolved by either:
1. Creating a custom install package whic... - 01:24 AM Revision a6eea720 (qgis): Fix crashes caused by concurrent rendering of cached QPictures from Qgs...
- QgsSvgCache::svgAsPicture was rendering an implicitly shared copy when
the picture had already been cached. It turns ... - 01:13 AM Bug report #17363 (Closed): DB Manager cannot load a PG Raster with a complex name
- A PostGIS geometry table with a complex name can successfully be added to QGIS via DB Manager:...
2017-10-30
- 11:46 PM Bug report #17351: Link failure on OS without thread local storage
- Does 2.18.13 work ok? Maybe QThreadStorage doesn't work on bsd either...
- 11:20 PM Bug report #17351: Link failure on OS without thread local storage
- Alas, with the following blind patch...
- 05:38 PM Bug report #17351: Link failure on OS without thread local storage
- I probably need a bit more:...
- 10:38 PM Bug report #17362: Node Tool Selects Invisible Objects
- Also, the new node tool is very well done. Thank you for the hard work, it's awesome.
- 07:24 PM Bug report #17362: Node Tool Selects Invisible Objects
- I just compiled the latest master (commit b3ef4da2c05e4c7c8b140a747875f138d88dc95a from Mon Oct 30 21:13:26 2017 +100...
- 04:42 PM Bug report #17362 (Feedback): Node Tool Selects Invisible Objects
- The node tool, selection happens without regard to the visibility of the object. In the simple case (procedure 1), y...
- 08:55 PM Bug report #17258: Custom CRS Definition dialog is unusable
- Trying to better describe the problems...
After starting QGIS and loading a project this entry appears in the Cust... - 08:13 PM Revision 3ae9ac5e (qgis): translation string fixes
- 08:04 PM Bug report #17332: QGIS unable to save a layer with measures
- The GIS stackexchange question above now has an answer, and I found that the QgsVectorFileWriter correctly writes out...
- 03:49 PM Bug report #17361 (Closed): Dependecy problem - python-sip with KDE Neon
- After adding Kde Neon repo to Kubuntu 16.04, there is a dependency problem with python-sip.
KDE Neon updates it to 4... - 03:03 PM Feature request #17360 (Open): Add possibility to define default values in DB Manager
- Adding data to a PostgresDatabase with DB Manager in QGIS makes it really easy to add data to the database. That's a ...
- 02:15 PM Bug report #17359 (Closed): crash while enabling 'on the fly' CRS transformation
- 1. with browser create new polygon shp WGS 84 EPSG:4256
2. open in desktop
3. toggle edit ON
4. draw 1 polygon
5... - 02:10 PM Feature request #16844 (Closed): New node tool - allow to batch select vertices between two points
- Added in https://github.com/qgis/QGIS/pull/5479
- 02:10 PM Feature request #16844 (Closed): New node tool - allow to batch select vertices between two points
- Added in https://github.com/qgis/QGIS/pull/5479
- 02:09 PM Feature request #15119 (Closed): on screen snapping indicator
- Added in https://github.com/qgis/QGIS/pull/5451
- 02:09 PM Feature request #15119 (Closed): on screen snapping indicator
- Added in https://github.com/qgis/QGIS/pull/5451
- 01:52 PM Bug report #17358 (Open): Draw Effects not saved
- I'm using QGIS 2.18.13. Been working on a project for some hours now.
I had some project filec orruptions - not sur... - 12:32 PM Revision 942f431f (qgis): Fix crash when rendering with SVG based symbols and SVG cache is filled
- When the svg cache was full, any attempt to render an svg from the
cache would crash QGIS.
Fixes #16643 - 12:13 PM Revision b3ef4da2 (qgis): Fix use after free
- 12:13 PM Revision 7843d22b (qgis): Fix memory leaks
- 12:13 PM Revision ba05edcb (qgis): Remove unnecessary debug message
- 11:49 AM Revision 7c5811ca (qgis): Fix building grass
- 11:45 AM Revision 59c3b86a (qgis): Revert "Avoid recursion in feature filter model"
- This reverts commit a3eadd320f28249915db54a02bbde9140327c6e3.
- 11:29 AM Revision ec27839a (qgis): Better typing for variables in configuration options
- 11:27 AM Revision 257f4429 (qgis): Fix proxy basic authentication setting
- 11:17 AM Revision a3eadd32 (qgis): Avoid recursion in feature filter model
- 10:31 AM Bug report #17357 (Closed): Crash when adding a new network-based data source in data source manager
- When adding a new layer with the data source manager and adding a new connection before adding the layer (no matter i...
- 09:49 AM Revision 1d21072b (qgis): Merge pull request #5491 from m-kuhn/dropV2
- Drop V2 suffix on all geometry classes
- 09:14 AM Revision e0025b65 (qgis): Rename QgsGeometry::fromPoint to QgsGeometry::fromPointXY
- Also introduces the from[Geometry]XY for QgsGeometryFactory
- 09:14 AM Revision bde014ec (qgis): Adjust leftovers addPointsV2 to addPoints
- 09:14 AM Revision d2c1011a (qgis): Convert missing from[Geometry]XY calls
- 09:14 AM Revision 82e6d121 (qgis): Rename from[GeometryType] to from[GeometryType]XY
- - QgsGeometry::fromPoint() was renamed to fromPointXY()
- QgsGeometry::fromMultiPoint() was renamed to fromMultiPoint... - 09:14 AM Revision 271ef7c0 (qgis): More V2 drop fixes
- 09:14 AM Revision e19f6482 (qgis): Various fixes to dropping V2 suffix
- 09:14 AM Revision ca74e391 (qgis): Rename QgsGeometry.addPoints with XY / V2-less versions
- 09:14 AM Revision b4e0ebe4 (qgis): Document API breaks
- 09:14 AM Revision 750a54f8 (qgis): More drop V2 suffix fixes
- 09:14 AM Revision 7f3ad768 (qgis): Rename QgsMultiPolygonV2 to QgsMultiPolygon
- 09:14 AM Revision 9a57bae6 (qgis): Rename QgsMultiPolygon to QgsMultiPolygonXY
- 09:14 AM Revision 3fcdcd87 (qgis): Rename QgsMultiPointV2 to QgsMultiPoint
- 09:14 AM Revision 81586d20 (qgis): Optimize loop
- 09:14 AM Revision b6f46eae (qgis): Rename QgsPolygonV2 to QgsPolygon
- 09:14 AM Revision 29e65ed0 (qgis): Rename QgsMultiPoint to QgsMultiPointXY
- 09:14 AM Revision becf86cf (qgis): Rename QgsPolygon to QgsPolygonXY
- 09:14 AM Revision b7908744 (qgis): Rename QgsMultiPolyline to QgsMultiPolylineXY
- 09:09 AM Revision 86d170be (qgis): [server] Remove dead code
- 08:57 AM Feature request #17356 (Open): Filter on DBManager tree
it would be very nice to be able to filter the DBmanager tree,
as you can filter objects with the search option...- 08:21 AM Revision 48f26e58 (qgis): Fix astyle version check for 3.0
- 08:03 AM Revision 4b0607a7 (qgis): Remove trusted status from Plugin Manager
- 08:03 AM Revision 66649b99 (qgis): Add configire to spelling check
- 07:25 AM Revision c48e0069 (qgis): Allow using system astyle
- 07:05 AM Bug report #17355 (Closed): Circular string (and new derived map tools) doesn't honor rubberband ...
- You can reproduce applying a big width, you will see only a tiny rubberband for this tools.
Reproduce for Cricular... - 06:56 AM Revision 9b670d08 (qgis): App doc and style changes
- 06:22 AM Bug report #17325: QGIS 2.99 with Network Analysis Error
- PR at https://github.com/qgis/QGIS/pull/5488
- 05:51 AM Bug report #16133 (Feedback): Wrong default extension picked for table outputs
- Should no longer be an issue on master - we now use proper layers instead of the old table outputs, so format/extensi...
- 05:48 AM Bug report #16018 (Feedback): Processing: numeric field are discarded and replaced with zero
- Should have been fixed by commit:c176a8bfb0f7f25edea15069318f769e7c9c82b - please confirm
- 05:48 AM Bug report #16018 (Feedback): Processing: numeric field are discarded and replaced with zero
- Should have been fixed by commit:c176a8bfb0f7f25edea15069318f769e7c9c82b - please confirm
- 05:41 AM Bug report #17298: Processing: gdal merge python error on QGIS 3
- Seems a windows-specific issue
- 05:24 AM Bug report #17345: Graduated classification is missing lowest data value in its classes
- Upstream issue in gdal library. Can be tested by running
ogrinfo -al -sql "SELECT min(Alle_2012) from OGRGeoJSON" ... - 05:24 AM Bug report #17345: Graduated classification is missing lowest data value in its classes
- Upstream issue in gdal library. Can be tested by running
ogrinfo -al -sql "SELECT min(Alle_2012) from OGRGeoJSON" ... - 05:06 AM Feature request #17354 (Open): Symbol needed in layer list for filter applied
- For comparison, when a layer is put into edit mode, a yellow pencil symbol appears next to the layer's name.
Could... - 03:55 AM Feature request #16634 (Closed): Renaming favourites
- Duplicate of #6780
- 03:39 AM Bug report #17129: Composer doesn't draw rasters
- If the Follow Map Theme setting isn't ticked (even with theme "(none)" changes that are made to the visibility of oth...
2017-10-29
- 12:58 AM Revision 71c17b87 (qgis): Fix build
- 12:53 AM Revision 43dfa283 (qgis): Drop unused variable
- 11:58 PM Bug report #17351: Link failure on OS without thread local storage
- I can't recall if that was the only change required, but I'd start with that and see if it compiles OK and the transf...
- 06:20 PM Bug report #17351: Link failure on OS without thread local storage
- I have a bit of a hard time diffing the commits in 2.18 and master for that feature - you mean just replacing thread_...
- 08:39 AM Bug report #17351: Link failure on OS without thread local storage
- You may have luck by ifdefing in QThreadStorage for bsd. This is what's used in the 2.18 backport - see commit:af3370...
- 10:49 PM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000
- OK
my computer isn't doing it now, it was doing it yesterday when I was able to capture the video clip
so some weir... - 10:59 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000
- Patrick Dunford wrote:
> I have tested this further and believe it is a real issue in the Linux edition of Qgis. whe... - 10:57 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000
- I have tested this further and believe it is a real issue in the Linux edition of Qgis. when right clicking a layer t...
- 08:32 PM Revision e5237809 (qgis): add loading of spatialite on windows and remove remaining references to
- pyspatialite (followup 39816cf84)
- 08:27 PM Bug report #17352 (Closed): QGIS Crashing on adding services in browser
- 06:20 PM Bug report #17352: QGIS Crashing on adding services in browser
- It's probably same problem as in #17279-6
- 06:16 PM Bug report #17352 (Closed): QGIS Crashing on adding services in browser
- QGIS 2.99 is crashing on any attempt to add new WMS or PostGIS service in Browser (probably any of them). Service is ...
- 08:26 PM Revision 77de9fc5 (qgis): [Plugin manager] remove depreciated and unused stuff
- 08:20 PM Revision 39816cf8 (qgis): Merge pull request #5493 from gacarrillor/bye_pyspatialite
- Bye pyspatialite
- 06:59 PM Revision cfba4c4d (qgis): fix windows build
- 06:28 PM Bug report #17353 (Closed): DB Manager TypeError on PostGIS loading
- When trying to add layer from DB Manager for any PostGIS table, traceback is thrown. On yesterday build it was crashi...
- 04:46 PM Revision 6415fad0 (qgis): Get rid of PySpatiaLite
- 04:46 PM Revision 64021605 (qgis): Use sqlite3 instead of pyspatialite for SpatiaLite connections
- 01:33 PM Revision 5b64af13 (qgis): Remove the empty Description column from Interface Customization dialog
- 01:31 PM Revision 2533960c (qgis): Remove unused include
- 01:31 PM Revision 20f2a146 (qgis): Increase ccache size
- 01:31 PM Revision 5dbeaf58 (qgis): [postgres][test] Check QgsFeatureRequest.connectionTimeout flag
- 01:31 PM Revision 0c321fb5 (qgis): Decouple transaction handling from QgsProject
- 01:31 PM Revision 28f27226 (qgis): QgsTransaction.create expects layers, not ids
- 01:31 PM Revision 37e9272f (qgis): Fix API typo
- 01:31 PM Revision ebae560a (qgis): Debug cache misses
- 10:17 AM Revision 29e8990e (qgis): Merge pull request #5483 from m-kuhn/postgisEmptyValue
- [postgres] Distinguish empty and NULL values
2017-10-28
- 12:46 AM Bug report #17351 (Closed): Link failure on OS without thread local storage
- OpenBSD doesnt have support (yet) for thread local storage, so since https://github.com/qgis/QGIS/pull/4561 the linki...
- 12:24 AM Revision e6e61891 (qgis): We cannot test to insert NULL with NOT NULL constraints
- 11:15 PM Revision 76746e7d (qgis): [postgres][test] Assert NULL insert behavior
- 0 != '' != NULL
- 11:14 PM Revision 3b0b82cb (qgis): [postgres] Distinguish empty and NULL values
- 06:05 PM Bug report #17344 (Closed): Opening the "table" tab in DB Manager cannot be canceled
- 06:04 PM Bug report #17348 (Closed): Right clicking layer in canvas causes zoom out to 1,000,000
- I don't think we ca handle also idiosyncrasies of each OS :)
- 06:04 PM Bug report #17348 (Closed): Right clicking layer in canvas causes zoom out to 1,000,000
- I don't think we ca handle also idiosyncrasies of each OS :)
- 10:57 AM Bug report #17348: Right clicking layer in canvas causes zoom out to 1,000,000
- I see that the first option on a right click menu for a layer is "Zoom to layer".
This issue is possibly related t... - 10:28 AM Bug report #17348 (Feedback): Right clicking layer in canvas causes zoom out to 1,000,000
- In my project I am right clicking on the names of the layers in the layer list to view or change layer properties. Wh...
- 05:55 PM Bug report #17345 (Feedback): Graduated classification is missing lowest data value in its classes
- Is this a regression?
- 05:55 PM Bug report #17345 (Feedback): Graduated classification is missing lowest data value in its classes
- Is this a regression?
- 04:29 PM Bug report #17350 (Closed): In distance matrix a point is its own neighbour
- If target point layer is the same as input point layer QGIS treats an input point as its own neighbour, but a neighbo...
- 03:05 PM Revision 2c53ba9a (qgis): [Plugin manager][needs-docs] Update a tooltip to tell users they can al...
- 01:12 PM Revision 24de8195 (qgis): [askUserForOGRSublayers] Use layername= instead of layerid= when no amb...
- Complementary fix to 1822b76c1a69418e44d7a1186e16f54d670267ad for the case
where a layer has mixed geometry types. - 01:09 PM Feature request #12159 (Closed): Add Settings button to Shortest Path widget
- The road graph plugin is no more, and was replaced with qgis algorithms. This bug is no longer valid.
- 01:09 PM Feature request #12159 (Closed): Add Settings button to Shortest Path widget
- The road graph plugin is no more, and was replaced with qgis algorithms. This bug is no longer valid.
- 01:07 PM Feature request #12158 (Closed): Rename "Road Graph" to "Shortest Path"
- Fixed in 3.0
- 01:07 PM Feature request #12158 (Closed): Rename "Road Graph" to "Shortest Path"
- Fixed in 3.0
- 11:24 AM Feature request #14914 (Closed): Add a warning to Plugin manager
- Superseded by #17349
- 11:23 AM Feature request #17349 (Closed): Sort out the trusted/untrusted plugins/authors stuff
- Let's gather existing discussions.
*Richard said:*
_Instead of this black-white labeling I now have the idea th... - 11:00 AM Revision 910b9ea5 (qgis): layout
- 09:58 AM Bug report #17347 (Closed): MetaSearch: Add WMS/WMTS data button broken
- In MetaSearch the Add Data button is broken.
To reproduce:
- add Default servers
- select Netherlands: Nationa... - 09:48 AM Revision ae4c8119 (qgis): style
- 08:35 AM Bug report #17346 (Closed): Composer doesn't render rasters
- In #17129 I referred to an issue where rasters did not render in the composer preview unless the "Follow map theme" s...
2017-10-27
- 12:51 AM Bug report #13565: modifying a svg already cached doesn't invalidate the cache, renders as versio...
- Håvard Tveite wrote:
> I am developing a Python plugin that is generating SVG symbols for a layer, and since I am re...
Also available in: Atom