Activity

From 2017-02-25 to 2017-03-26

2017-03-26

03:55 PM Bug report #16378 (Closed): SAGA not loaded on QGIS 2.18.5: ... Pedro Venâncio
01:25 PM Bug report #15339: Warp tool requires CRS of extent when no extent set: > The user must still designate an extent CRS to proceed. I would therefore still consider this bug still open, thou... Giovanni Manghi
01:23 PM Bug report #15339 (Reopened): Warp tool requires CRS of extent when no extent set: As of 2.18.5, the GDAL warp tool will always add a -te parameter to the gdalwarp command, no matter if the user input... Evan Derickson
01:23 PM Bug report #15339 (Reopened): Warp tool requires CRS of extent when no extent set: As of 2.18.5, the GDAL warp tool will always add a -te parameter to the gdalwarp command, no matter if the user input... Evan Derickson
10:45 AM Feature request #11873 (Closed): Add option (-segmentize) to "save as..." to allow densification ...: Nyall Dawson wrote:
> I think this should be closed. Better to use the processing densify algorithm if this is what y... Giovanni Manghi
10:45 AM Feature request #11873 (Closed): Add option (-segmentize) to "save as..." to allow densification ...: Nyall Dawson wrote:
> I think this should be closed. Better to use the processing densify algorithm if this is what y... Giovanni Manghi

2017-03-25

03:33 AM Bug report #16376 (Closed): Calculations errors on WGS84 with Ellipsoid set to None/Planimetric: Fixed in commit:daa2454558e3444127ed7351ef9e6d0523201f00 Nyall Dawson
03:33 AM Bug report #16376 (Closed): Calculations errors on WGS84 with Ellipsoid set to None/Planimetric: Fixed in commit:daa2454558e3444127ed7351ef9e6d0523201f00 Nyall Dawson
01:50 AM Bug report #16377 (Closed): Crash when zooming a reprojected PostGIS layer: A PostGIS layer with a wrong extent (-inf, -inf - -10.56548, 9.94114, EPSG:4326) reliably causes QGIS to crash when z... Paolo Cavallini
01:01 AM Feature request #11873 (Feedback): Add option (-segmentize) to "save as..." to allow densificatio...: I think this should be closed. Better to use the processing densify algorithm if this is what you're after! Nyall Dawson

2017-03-24

02:53 PM Bug report #16376 (Closed): Calculations errors on WGS84 with Ellipsoid set to None/Planimetric: QGIS, by default, in Project -> Project Properties -> General has:
Ellipsoid: None/Planimetric
Units for distance me... Pedro Venâncio
10:00 AM Bug report #15317: the window Layer Properties gets irresponsive: After reinstall of the whole system it worked fine for a while but now the problem is back again.
opensuse leap 42.2... Albert Teixido
09:46 AM Feature request #15905: QgsGeometryAnalyzer, buffer: Allow specification of segments: Pull request: https://github.com/qgis/QGIS/pull/4302 Håvard Tveite
09:33 AM Bug report #16343: 2.18 build fails with latest sip/pyqt4: Fedora has a patch that works: https://src.fedoraproject.org/cgit/rpms/qgis.git/plain/qgis_sip-ftbfs.patch
Second pa... Doug Newgard
01:28 AM Bug report #15803: 2.18: Move Selection to Top not working in attribute table: nor saving project change the behaviour Luigi Pirelli
01:24 AM Feature request #15927: Y format parameter for Tile Server (XYZ) layers: Probably related, OpenLayers has a convention to indicate an inverted axis in the template with {-y}, see: https://gi... Alessandro Pasotti

2017-03-23

06:34 PM Feature request #16375: Change Way SDO_RELATE is used in QGIS spatial queries: Reference for licensing.
11.2
[[https://docs.oracle.com/cd/E18283_01/appdev.112/e11830/sdo_locator.htm#i632018]]
12... Simon Greener
06:31 PM Feature request #16375 (Open): Change Way SDO_RELATE is used in QGIS spatial queries: Background.
I executed an "identify" in QGIS against a single mapped object that comes from an Oracle table with ... Simon Greener
06:28 PM Bug report #16370 (Closed): regression: processing's checkGrass7IsInstalled's v.voronoi algorithm...: Fixed in changeset commit:"40f86b2033e3ca3611f70467c4f04b3d05720b52". Mathieu Pellerin - nIRV
04:51 PM Bug report #13233 (Closed): GPS Information - the Connection is not restored: Fixed in changeset commit:"9d5f28921d185705303ce689fee84757f8990a3c". Steven Mizuno
10:27 AM Feature request #15363: Snapping is not availaible on move points: Regis Haubourg wrote:
> Why not merge node tool and move tool using node tool behavior? That would solve the issue an... Julien Monticolo
09:20 AM Feature request #15363: Snapping is not availaible on move points: Hi, Still true in qgis 2.18.4 and 2.99 and really confusing indeed for points.
Why not merge node tool and move tool... Regis Haubourg
09:20 AM Feature request #15363: Snapping is not availaible on move points: Hi, Still true in qgis 2.18.4 and 2.99 and really confusing indeed for points.
Why not merge node tool and move tool... Regis Haubourg
10:19 AM Bug report #15803: 2.18: Move Selection to Top not working in attribute table: confirmed with latest build (5afdf6f) of 2.18 on the test data Luigi Pirelli
07:44 AM Bug report #11124 (Reopened): Double-clicking layer checkbox opens Layer Properies: This is still an issue. Clcking on the checkbox shouldn't trigger opening properties. Under the current situation, cl... Neil Freeman
07:05 AM Bug report #16374 (Reopened): Osgeo4W64 QGISserver install does not run without installing QGIS d...: Richard Duivenvoorde
07:04 AM Bug report #16374 (Closed): Osgeo4W64 QGISserver install does not run without installing QGIS des...: Note: after removing QGIS-desktop from the machine, QGIS-server still works...
Note2: with 'not working' I mean: cal... Richard Duivenvoorde
06:07 AM Bug report #16374 (Closed): Osgeo4W64 QGISserver install does not run without installing QGIS des...: Clean installation of QGISserver (2.18.x) in OSGeo4W64 combined with the provided httpd.conf does not work UNLESS you... Richard Duivenvoorde
06:27 AM Feature request #12430: GetFeatureInfo with INFO_FORMAT=text/html should only send HTML maptip co...: Could this bug be treated for QGIS 3?
The presence of maptip in XML GetFeatureInfo response is weird and HTML GetFeat... Nicolas Boisteault
04:10 AM Bug report #10614 (Reopened): compiling QGIS with GRASS 7 support: I am having similar problems with GRASS 7.2.1 (svn revision 70792) with both QGIS master and 2.18 branch. Saber Razmjooei
04:10 AM Bug report #10614 (Reopened): compiling QGIS with GRASS 7 support: I am having similar problems with GRASS 7.2.1 (svn revision 70792) with both QGIS master and 2.18 branch. Saber Razmjooei
04:10 AM Bug report #10614 (Reopened): compiling QGIS with GRASS 7 support: I am having similar problems with GRASS 7.2.1 (svn revision 70792) with both QGIS master and 2.18 branch. Saber Razmjooei
04:10 AM Bug report #10614 (Reopened): compiling QGIS with GRASS 7 support: I am having similar problems with GRASS 7.2.1 (svn revision 70792) with both QGIS master and 2.18 branch. Saber Razmjooei
02:10 AM Feature request #2830: symbology: add option to sort size-scaled symbols with largest at bottom: This is now possible via the "Control feature rendering order" parameter, so closing.
Thanks ! mlennert -
02:10 AM Feature request #2830: symbology: add option to sort size-scaled symbols with largest at bottom: This is now possible via the "Control feature rendering order" parameter, so closing.
Thanks ! mlennert -
02:10 AM Feature request #2830: symbology: add option to sort size-scaled symbols with largest at bottom: This is now possible via the "Control feature rendering order" parameter, so closing.
Thanks ! mlennert -

2017-03-22

12:40 AM Bug report #16373 (Feedback): Spinbox Widgets revert to start value in LayerProperties in Symbolo...: Cannot reproduce on Linux (Fedora 25) or Windows Nyall Dawson
09:26 PM Bug report #16373 (Closed): Spinbox Widgets revert to start value in LayerProperties in Symbology...: Changing a value is not possible, will revert to default value by clicking on another Widget.
Seems to effect everyth... Mark Johnson
07:49 PM Bug report #16370: regression: processing's checkGrass7IsInstalled's v.voronoi algorithm check br...: Some more information. Tryign to do a v.in.ogr import through GRASS's own GUI throws the following error:... Mathieu Pellerin - nIRV
07:40 PM Bug report #16370: regression: processing's checkGrass7IsInstalled's v.voronoi algorithm check br...: After further investigation, the problem might be a regression in GRASS 7.2 itself. The problem appears when v.in.ogr... Mathieu Pellerin - nIRV
12:09 PM Bug report #16371 (Closed): Continuous vector color scale: That's implemented again in master using data defined colour assistant. Nyall Dawson
12:09 PM Bug report #16371 (Closed): Continuous vector color scale: That's implemented again in master using data defined colour assistant. Nyall Dawson
07:26 AM Bug report #16371 (Closed): Continuous vector color scale: The ability to have a continuous color scales for vectors seems to have been removed in recent versions. If it is sti... belg4mit -
11:36 AM Bug report #16372 (Closed): Point Layer with "WKBNoGeometry" in WMSCapabilities of QGIS Server: Hy,
I integrated a point layer by using a vrt file. The vrt file contains a odbc connection to a firebird db.
... Stefan Niemeier
01:44 AM Bug report #16110: Processing toolbox is hardcoded to GRASS 70: +1 for backport, also to 2.14 as long as this is LTR. mlennert -

2017-03-21

12:11 AM Feature request #16349: Make scale dependent visibility uniform for layers and labels: Sorry I was unclear: the options must stay separate, whet should be uniform is the interface: currently the same opti... Paolo Cavallini
02:28 PM Feature request #16349: Make scale dependent visibility uniform for layers and labels: I like the option of having scale dependent labels and symbology separate.
Maybe make it an _option_ to have them uni... Donovan Cameron
11:15 PM Feature request #2738 (Closed): Legend customizations are not saved in Composer Template: Fixed in changeset commit:"616868efbeb72633fd0798efeaee05e75a92de71". Nyall Dawson
09:18 PM Bug report #16370 (Closed): regression: processing's checkGrass7IsInstalled's v.voronoi algorithm...: On my master build, processing's GRASS7 algorithms are broken as the checkGrass7IsInstalled() function fails due to a... Mathieu Pellerin - nIRV
06:06 PM Bug report #11889 (Closed): Setting "use project CRS" in "settings -> options -> CRS > CRS for ne...: Fixed in changeset commit:"0500865b3f6b7599985e428cb235826910e71c81". Nyall Dawson
02:57 PM Bug report #16243: Crash while using Geo-reference Layer: I didn't have the points saved on that sorry. I'll look to give it another try soon and save the details to catch tha... James Harvey
02:35 PM Feature request #16315: Proper Mask Functionality: I think with the feature request I submitted only for labels, that this is similar and could be accomplished with thi... Donovan Cameron
09:27 AM Bug report #16211: Random Extract within Subsets saving only one subset: Confirmed also in master and linux machine.
Other data used to test are in tests/testdata/points with field id2. Onl... matteo ghetta
05:11 AM Bug report #16368: QGIS Server (much) slower rendering than Desktop single thread after specific ...: Performances degradations have also been reported for QGIS Desktop for specific prividers (like ms sql server) but al... Giovanni Manghi
04:34 AM Bug report #16327: "Edit Create Options" dialogue doesn't handle whitespace correctly: I tried to fix this issue. The problem lies on how QGIS stores list of profiles. It store as concatenation of all pro... Ismail Sunni
02:04 AM Bug report #16369 (Closed): Filter query on WFS layer doesn't work: I tried it with QGIS 2.18.4-1 as well as 2.99.0-32 (nightly build), both with the same behaviour. I wanted to add a W... Stefan Rey

2017-03-20

11:21 PM Bug report #16343: 2.18 build fails with latest sip/pyqt4: More details and a workaround were published here: https://aur.archlinux.org/packages/qgis/ but Python support is sti... Shai Efrati
10:19 PM Bug report #15193 (Closed): Print composer performance at startup: Fixed in changeset commit:"c60a73cb9a6bd552a0991614aa7993b2fcd20f1f". Nyall Dawson
10:19 PM Feature request #12673 (Closed): when creating a composer, show a *sorted* list of existing print...: Fixed in changeset commit:"c66026886ec7480c7440ae1fead05cb1ecdba8fd". Nyall Dawson
08:18 PM Bug report #10828: project loading and adding/removing layers is slow if project has composers: With the changes merged in https://github.com/qgis/QGIS/pull/4279 all sample projects attached here load instantly. Nyall Dawson
10:16 AM Feature request #16367 (Closed): Indicate filters in layer list: Jürgen Fischer
04:23 AM Feature request #16367: Indicate filters in layer list: This is a duplicate to my feature request from 2 years ago which was classified as "Nice to have" : #12890 Bernd Vogelgesang
01:48 AM Feature request #16367 (Closed): Indicate filters in layer list: I want to know if a filter is set for a map layer. Therefore, I suggest to add a filter icon right next to layer entr... Simon Gröchenig
06:32 AM Bug report #16368 (Closed): QGIS Server (much) slower rendering than Desktop single thread after ...: On the same machine, with the same settings, the rendering time of QGIS Server Master/QGIS 2.18.4 and 2.14 latest is ... Tudor Bărăscu
03:27 AM Bug report #12479: gdal 2.0.0: This matter needs to be resolved for QGIS 3. Mark Johnson
03:20 AM Bug report #15978: QgsRasterDataProvider::cStringList2Q_ without UTF8 support: This matter needs to be resolved for QGIS 3, since it creates rubbish from any UTF8 string. Mark Johnson

2017-03-19

06:36 PM Bug report #16353: regression: opening raster layer properties window fails to load layer min/max...: This only affects master (2.99 to become 3.0) as it is a regression linked to the revamped raster min/max widget. I'v... Mathieu Pellerin - nIRV
05:38 PM Bug report #16365 (Closed): selection icons behave different and selection changes do not repaint: Fixed in changeset commit:"0ed1414885e49f6df26c3aed80970a9de94ea3b3". Nyall Dawson
03:44 PM Bug report #16366 (Closed): error with pit remove algorithm in QGIS 2.18.4: When I run the TauDEM's Pit Remove algorithm in latest version (2.18.4) I get following error: *global name 'escapeAn... Jorge Santos
04:04 AM Bug report #7818: PostGIS warnings: Erroneous query: SELECT styleQML FROM layer_styles: It seems that this error still occurs when adding a SpatiaLite layer. Christophe Damour

2017-03-18

06:28 AM Bug report #16353 (Feedback): regression: opening raster layer properties window fails to load la...: Does this effectively affects only master/qgis3 or also previous versions? Giovanni Manghi
03:57 AM Feature request #9387 (Closed): Print Composer - Coordinate system as expression: Implemented in master ( QGIS 3.0) Nyall Dawson
03:57 AM Feature request #9387 (Closed): Print Composer - Coordinate system as expression: Implemented in master ( QGIS 3.0) Nyall Dawson
03:56 AM Feature request #11193 (Closed): allow CRS selection for map frame in composer: Implemented in master (QGIS 3.0) Nyall Dawson
03:56 AM Feature request #11193 (Closed): allow CRS selection for map frame in composer: Implemented in master (QGIS 3.0) Nyall Dawson

2017-03-17

05:18 PM Bug report #14394: Tooltips are blank (2.14, 2.18): Problem solved by changing Style from Plastique to Adwaita in Settings-->Options|General.
GTK+ and Adwaita-dark styl... Will Kemp
06:58 AM Bug report #16354: mutually exclusive group prevent checking sub-children individually: Hi Deniz,
I downloaded your project and loaded in 2.18.4
Only the first time I can click/hide polygon and lines lay... Richard Duivenvoorde
06:17 AM Bug report #16365 (Closed): selection icons behave different and selection changes do not repaint: 1) there are two selection icons (1) and (2) in screedump, both with a little dropdown item next to it.
The first one... Richard Duivenvoorde
05:15 AM Bug report #16364 (Closed): Can't change feature rendering order in 2.5D renderer: After applying it in layer properties, it always returns to a default formula. Nikolay Lebedev
05:13 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Now I see something interesting.
I have a composer template (_Template Format A3.qpt_ attachment) I use since 2.x.x.... Andre Jesus
04:40 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Windows 10 64 bits
QGIS 2.8.9 32 bits
A3 300 dpi, 3.92 MB PDF, ~5 seconds
A0 160 dpi, 12.8 MB PDF, ~5 seconds
QGIS ... Andre Jesus
03:54 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: To reproduce this issue, please download sample shape files from http://data.statistik.gv.at/data/OGDEXT_GEM_1_STATIS... R. R.
02:35 AM Feature request #16363 (Closed): Add quadkey parameter in XYZ layers: Some XYZ services (i.e. Bing Maps) use quadkey in a tile address, so it'll be handy to have this parameter in layer d... Nikolay Lebedev
02:28 AM Bug report #16342 (Open): Exporting shape file from a SpatiaLite table produces very large file size: I can confirm the issue.
Using ogr2ogr the file size is 28 MB. But QGIS save as function output is 47 MB! Saber Razmjooei

2017-03-16

12:52 AM Bug report #16362 (Closed): regression: labelling font size @value variable not binded to value: Fixed in changeset commit:"25fe2b07b9bd2b991d5359817053470797d1c379". Mathieu Pellerin - nIRV
07:30 PM Bug report #16362 (Closed): regression: labelling font size @value variable not binded to value: At some stage during the 2.99 dev cycle, the font size @value variable for labelling properties started returning NUL... Mathieu Pellerin - nIRV
02:59 PM Feature request #16361 (Open): Processing - Typing in the model window should start listing tools: In the model builder I can search for tools in the algorithm tab. As I type, the search lists matching tools. I would... Magnus Nilsson
05:47 AM Feature request #16360 (Closed): Allow grouping items in Composer: It would be useful to have a possibility to group items in Composer Items window. Like layer groups in a layer tree. ... Nikolay Lebedev
05:43 AM Feature request #12584: Change layer source: changeDataSource plugin functionality should really be merged into core QGIS. Nikolay Lebedev
04:48 AM Bug report #16359 (Closed): In the print composer dynamically referencing to page size presets le...: In the print composer a preset page size is set (e.g. A0). Item sizes/positions are defined using expression evaluati... Johanna Seibert
03:50 AM Bug report #16358 (Closed): Can't use custom function to select by expression: Fixed in changeset commit:"90e91448f6e09911b226305702ba40b089ec127d". Anonymous
03:03 AM Bug report #16358 (Closed): Can't use custom function to select by expression: I'm following this tutorial (http://www.qgistutorials.com/en/docs/custom_python_functions.html) on custom expressions... Ian Turton
02:14 AM Feature request #16357 (Closed): Allow to set extent from other layer in raster save as dialog: At the moment raster save as dialog has two options - set output extent to whole layer and to current extent. It woul... marisn -

2017-03-15

09:25 PM Bug report #16341: Geopackage table behaves strange and ultimately kills QGIS.: GDAL/OGR does not read the translated file from FME correctly. It is likely to be a bug with the FME translator. The ... Saber Razmjooei
08:18 PM Bug report #16270 (Closed): Modeler does not work on QGIS master: Fixed in changeset commit:"b0dc9f8517fe22462341ec4e01eaeec9c7c3234e". Nyall Dawson
04:48 PM Feature request #16356 (Open): allow get geometry column name of vector inputs: as it seems possible from this answer
https://lists.osgeo.org/pipermail/qgis-developer/2017-March/047337.html Giovanni Manghi
04:39 PM Bug report #16110: Processing toolbox is hardcoded to GRASS 70: Is there any chance that this could be back ported to 2.18?
I tried to apply the diff provided by J. Fischer but it ... Donovan Cameron
10:16 AM Bug report #16312 (Closed): missing icons in Processing script editor: It was a matter of having obsolete files .qgis2/processing from a previous installation. I am closing this. Andreas Plesch
04:20 AM Bug report #16036: regression: node tool's snapping not working: Windows 10 64 bits - QGIS 2.18.4, 2.14.12 and 2.8.9
It actually works but the snapping symbol does not show up using... Andre Jesus
03:50 AM Bug report #16036: regression: node tool's snapping not working: Burghardt Scholle wrote:
>Under 'Project > Snapping Options ... > Advanced configuration' the list is often empty or ... Jan Lippmann
02:39 AM Bug report #16036: regression: node tool's snapping not working: Hi,
I just upgrade my qgis-dev on Windows to code revision 264c72 - and snapping works fine. Various tests with the c... Burghardt Scholle

2017-03-14

12:25 AM Bug report #16355: relative path in embedded groups are not respected: with a demo project, it's always better.
would it be possible to add a test for this too? Denis Rouzaud
12:25 AM Bug report #16355: relative path in embedded groups are not respected: with a demo project, it's always better.
would it be possible to add a test for this too? Denis Rouzaud
08:06 AM Bug report #16355 (Closed): relative path in embedded groups are not respected: Embeding a layer with SVG symbols defined as relative path in a project not defined at the same path as the embed pro... Denis Rouzaud
11:54 PM Bug report #16216 (Closed): OGR data provider is extemely slow on changing attribute values: Fixed in changeset commit:"16a421c7a8292b4e697363e5c57634ff57025e3a". Martin Landa
11:05 PM Bug report #16354: mutually exclusive group prevent checking sub-children individually: I added a demo project.
I cannot hide one of the two layers in the "sub-group" (i.e. lines or polygons). Denis Rouzaud
11:05 PM Bug report #16354: mutually exclusive group prevent checking sub-children individually: I added a demo project.
I cannot hide one of the two layers in the "sub-group" (i.e. lines or polygons). Denis Rouzaud
08:02 AM Bug report #16354 (Closed): mutually exclusive group prevent checking sub-children individually: In the shown example, the top group is mutually exclusive.
I cannot hide a layer of the sub-group.
Making the top... Denis Rouzaud
10:12 PM Feature request #15824 (Closed): Composer Name Variable: Fixed in changeset commit:"29a8c0cf171ec94d988914876fbca5c4a559bb94". Nyall Dawson
06:04 PM Bug report #16339: Embedded layer style and labels properties can be modified within the layer st...: Hi Regis,
I checked with 2.99.0-Master QGIS code revision 2654c72 and it is not fixed. Is there another version and w... Laurence Bechet
10:52 AM Bug report #16339: Embedded layer style and labels properties can be modified within the layer st...: Hi Laurence,
can you test in QGIS 3 if the issue is correctly fixed?
If yes, that deserves backport to 2.18 (future... Regis Haubourg
09:32 AM Feature request #16092: Option to display the feature count of the number of filtered results (in...: Actually, it seems Shapefiles already use the filtered feature count, but not SpatiaLite/SQLite layers. I think the f... Arjan Mossel
07:44 AM Bug report #15626 (Reopened): GDAL-Tools (Raster menu) batch mode in QGIS 2.16 does not work: Bug is back in 2.18.4 (windows).
Single file mode works but batch mode gives the following error:... Andre Jesus
07:44 AM Bug report #15626 (Reopened): GDAL-Tools (Raster menu) batch mode in QGIS 2.16 does not work: Bug is back in 2.18.4 (windows).
Single file mode works but batch mode gives the following error:... Andre Jesus
05:04 AM Bug report #16342: Exporting shape file from a SpatiaLite table produces very large file size: Sample shape files (EPSG: 31259, Encoding: Windows-1252):
http://www.bev.gv.at/pls/portal/docs/PAGE/BEV_PORTAL_CONT... R. R.
03:10 AM Bug report #16342: Exporting shape file from a SpatiaLite table produces very large file size: Hi Saber,
the QGIS 'About' dialog says 'Compiled against GDAL/OGR 1.11.3':
!https://issues.qgis.org/attachments/108... R. R.
02:41 AM Bug report #16353 (Closed): regression: opening raster layer properties window fails to load laye...: I'm not sure when this regression slipped into QGIS but I suspect it is linked to commit 532eb58d1f4003a (which revam... Mathieu Pellerin - nIRV

2017-03-13

11:44 PM Bug report #16341: Geopackage table behaves strange and ultimately kills QGIS.: I could, but that would not help. It is clear to me that parts of QGIS handles the values (that are there) perfectly ... Mats Elfstrom
11:14 PM Bug report #16341 (Feedback): Geopackage table behaves strange and ultimately kills QGIS.: when I run
@ogrinfo -ro kivik/kivik.gpkg highway@
It reports all the values to be NULL. So, I think it could be a c... Saber Razmjooei
11:14 PM Bug report #16341 (Feedback): Geopackage table behaves strange and ultimately kills QGIS.: when I run
@ogrinfo -ro kivik/kivik.gpkg highway@
It reports all the values to be NULL. So, I think it could be a c... Saber Razmjooei
11:14 PM Bug report #16341 (Feedback): Geopackage table behaves strange and ultimately kills QGIS.: when I run
@ogrinfo -ro kivik/kivik.gpkg highway@
It reports all the values to be NULL. So, I think it could be a c... Saber Razmjooei
11:14 PM Bug report #16341 (Feedback): Geopackage table behaves strange and ultimately kills QGIS.: when I run
@ogrinfo -ro kivik/kivik.gpkg highway@
It reports all the values to be NULL. So, I think it could be a c... Saber Razmjooei
11:43 PM Bug report #16345: Spatial Bookmark Panel: crash on export: Works fine in Ubuntu, I guess it is platform specific.
@Tobias, #16350 is not related to this bug and will be handle... Saber Razmjooei
11:43 PM Bug report #16345: Spatial Bookmark Panel: crash on export: Works fine in Ubuntu, I guess it is platform specific.
@Tobias, #16350 is not related to this bug and will be handle... Saber Razmjooei
11:43 PM Bug report #16345: Spatial Bookmark Panel: crash on export: Works fine in Ubuntu, I guess it is platform specific.
@Tobias, #16350 is not related to this bug and will be handle... Saber Razmjooei
06:29 AM Bug report #16345: Spatial Bookmark Panel: crash on export: Andre Jesus wrote:
> Affect 2.18.4 only, 2.14.12 and prior versions work normal.
To the maintainer: Please also have... Tobias Wendorff
04:26 AM Bug report #16345: Spatial Bookmark Panel: crash on export: Confirmed.
Affect 2.18.4 only, 2.14.12 and prior versions work normal. Andre Jesus
11:40 PM Bug report #16338 (Closed): Problem with QGIS projects with OTF in master: Fixed in changeset commit:"1aee4246e0836ace38896a1cc1ac7f6f6bf00fd0". Nyall Dawson
11:40 PM Bug report #16337 (Closed): Wrong CRS displayed in status bar: Fixed in changeset commit:"0afc88e07f4d526279f5ac640bc386c562b71d99". Nyall Dawson
11:36 PM Bug report #16342 (Feedback): Exporting shape file from a SpatiaLite table produces very large fi...: Hi Reinhard,
What version of gdal are you using? I can't reproduce the problem with QGIS 2.18.4 (not from a ppa but ... Saber Razmjooei
11:28 PM Bug report #16346 (Feedback): [not working] select by radius: It works fine under Windows too.
I think it is a local problem. Feel free to upload your data and project. Otherwise... Saber Razmjooei
11:28 PM Bug report #16346 (Feedback): [not working] select by radius: It works fine under Windows too.
I think it is a local problem. Feel free to upload your data and project. Otherwise... Saber Razmjooei
06:32 AM Bug report #16346: [not working] select by radius: Reinhard Reiterer wrote:
> I can not confirm that on Ubuntu 16.04 LTS (QGIS 2.18.4).
>
> See also: #14748
I figured... Tobias Wendorff
01:47 PM Bug report #16352 (Feedback): keyboard shortcut for "Deselect Features from All Layers" button do...: QGIS version 2.99.0-Master code revision cd7b19c, win 7 sp1 x64 home edition. If I set keyboard shortcut for "Deselec... Piotr Kania
01:12 PM Bug report #16351: copy/paste features does not include attributes: Also, I have only tested on Win 7 OSGEO4W-64. Andrew McAninch
01:04 PM Bug report #16351 (Closed): copy/paste features does not include attributes: When I copy and paste features into a new layer or another layer no attributes are pasted. This happens in 2.18.4 an... Andrew McAninch
08:41 AM Bug report #16321 (Closed): ArcGISFeatureServer New Connection Not working. Cannot add a layer fr...: Fixed in #d6f4621b6622341e68dd966260384c2a4e1e793e Sandro Mani
06:28 AM Bug report #16350 (Closed): Spatial Bookmark Panel: precision gets trimmed: I believe this is a bug, since it simply makes no sense.
When creating a bookmark, it gets stored at high precisio... Tobias Wendorff
03:07 AM Feature request #16349 (Closed): Make scale dependent visibility uniform for layers and labels: the visibility widgets are different for layer general properties and label rendering properties. IMHO it would be ap... Paolo Cavallini

2017-03-12

07:43 PM Bug report #14505: Crash when loading raster layer with debug version of QT: Giovanni Manghi wrote:
> Is this still the case on 2.18.4 or qgis3/master?
I haven't upgrade my project to 2.18+ yet... Yun Lin
03:43 PM Feature request #16348: Add parameter type 'multiple field': See also: http://gis.stackexchange.com/questions/231706/whats-a-good-way-to-implement-an-attributes-to-keep-option-in... R. R.
03:34 PM Feature request #16348 (Closed): Add parameter type 'multiple field': Please add parameter type 'multiple field' in the processing toolbox, to list all fields of an input vector as checkb... R. R.
01:25 PM Bug report #16346: [not working] select by radius: I can not confirm that on Ubuntu 16.04 LTS (QGIS 2.18.4).
See also: #14748 R. R.
12:17 PM Bug report #16346 (Closed): [not working] select by radius: Right now, "select by radius" deselects an existing selection only, but doesn't select any new items. All other selec... Tobias Wendorff
01:24 PM Bug report #16347 (Closed): Processing script editor won't open: I think it is related with the new QgsSettings instead of QSettings (#a10c890383dc636c6300ca91360e64e2db20b27c#diff-5... matteo ghetta
12:56 PM Bug report #16180 (Closed): WMS browser panel loads wrong layer: Sorry, took some time.
I tried it on a Windows computer, which has never seen QGIS before. I've installed 2.18.4 com... Tobias Wendorff
12:05 PM Bug report #16345: Spatial Bookmark Panel: crash on export: Whoops, this is the correct attachment. Tobias Wendorff
12:01 PM Bug report #16345 (Closed): Spatial Bookmark Panel: crash on export: I've created this bookmark in "Spatial Bookmark Panel":
Name = "Düsseldorf"
Project = ""
xMin = 6.83
yMin = 51.21
xM... Tobias Wendorff
10:29 AM Bug report #16145: [macOS] Copy/paste table rows causes qgis to crash: I just did it (renamed ~/.qgis2 folder and preference files) and it doesn't make any difference.
didier peeters
08:48 AM Bug report #16344 (Closed): "Select Features by Value" - empty form: Closed. The layer didn't have attributes. Tobias Wendorff
08:45 AM Bug report #16344 (Closed): "Select Features by Value" - empty form: The form / window of "Select Features by Value" is empty inside and outside an edit session (see attachment). Tobias Wendorff
07:47 AM Bug report #16343 (Closed): 2.18 build fails with latest sip/pyqt4: Even after commit:85a0db24f32351f6096cd8282f03ad5c2f4e6ef5, build still fails with sip 4.19.1 and pyqt4 4.12... Doug Newgard
06:31 AM Bug report #15692: DB-Manager freezes when running complex SQL queries: Anita Graser wrote:
> What do you mean with "freeze"? Does the query finish in DB Manager after the necessary process... R. R.
06:09 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...: Hi Giovanni, I will check GitHub as soon as I find some time. At the moment, I do not know how a PR works. However, I... R. R.
06:09 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...: Hi Giovanni, I will check GitHub as soon as I find some time. At the moment, I do not know how a PR works. However, I... R. R.

2017-03-11

02:47 PM Bug report #15692 (Reopened): DB-Manager freezes when running complex SQL queries: Hi Giovanni, this is a bug report, not a feature request. In pgAdmin III all queries I have tested finish after a few... R. R.
02:03 PM Bug report #16342 (Closed): Exporting shape file from a SpatiaLite table produces very large file...: To reproduce this issue please import a shape file in a SpatiaLite table and export the table as a shape file again. ... R. R.
11:08 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Inkscape can be used to reduce the size of .pdf files created in QGIS (see screencasts). R. R.
11:08 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Inkscape can be used to reduce the size of .pdf files created in QGIS (see screencasts). R. R.
11:08 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Inkscape can be used to reduce the size of .pdf files created in QGIS (see screencasts). R. R.
10:32 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: As noted above, the proprietary GIS software, that we use at the moment, produces much smaller files than QGIS. R. R.
10:15 AM Bug report #16341 (Closed): Geopackage table behaves strange and ultimately kills QGIS.: I have a geopackage file, with several OSM tables. The gpkg file is converted from osm with FME, and FME can inspect ... Mats Elfstrom
05:17 AM Bug report #16299 (Closed): Processing: make URL to take Models from on-line collections configur...: Already possible: Processing / Options / General / "Scripts and models repository" Jürgen Fischer
05:17 AM Bug report #16299 (Closed): Processing: make URL to take Models from on-line collections configur...: Already possible: Processing / Options / General / "Scripts and models repository" Jürgen Fischer
03:30 AM Bug report #16334: Processing - Running a model freezes QGIS: This seems to happen with any data or model that I use. I have tried several SHP files and models and QGIS still free... Magnus Nilsson

2017-03-10

12:48 PM Bug report #14597 (Reopened): Grid Interpolation requires Real data type with decimals for Z value: This is still a problem in 2.18.4. I gave a QGIS workshop and all 12 participants had this issue on all platforms. If... Guillaume Larocque
12:37 PM Bug report #16339: Embedded layer style and labels properties can be modified within the layer st...: Also because the Layer/Labeling menu opens the layer styling panel, labels can be accessed from there as well. Laurence Bechet
11:48 AM Bug report #16339 (Closed): Embedded layer style and labels properties can be modified within the...: When using an embedded layer from a 'parent' project within a 'child' project, the (parent)layer properties are not a... Laurence Bechet
12:08 PM Bug report #16340 (Closed): Layers within an embedded group are not displayed on the map: Layer/Embedded layers and groups...
If you open a layer from a 'parent' project is is displayed on the map of the ... Laurence Bechet
09:43 AM Bug report #16247: mssql data provider: filtering layer doesn't work: Thomas Schneider wrote:
> > @Thomas Schneider
> > How is your usage with MSSQL layers?
> > I get constant Force Close... Giovanni Manghi
09:26 AM Bug report #16247: mssql data provider: filtering layer doesn't work: > @Thomas Schneider
> How is your usage with MSSQL layers?
> I get constant Force Close.
Sorry, I didn't understand ... Thomas Schneider
07:04 AM Bug report #16247: mssql data provider: filtering layer doesn't work: Andre Jesus wrote:
> Giovanni Manghi wrote:
> > do you remember when? 2.8?
>
> I didn't understand.
forget, I misun... Giovanni Manghi
06:46 AM Bug report #16247: mssql data provider: filtering layer doesn't work: Giovanni Manghi wrote:
> do you remember when? 2.8?
I didn't understand.
@Thomas Schneider
How is your usage with ... Andre Jesus
08:34 AM Bug report #16326: QGIS segfault when pointing to libjpeg/jdapimin: The problem appears to be related to the QMS plugin so I'm assuming it has something to do with the plugin framework.... Spencer Gardner
07:28 AM Bug report #16326: QGIS segfault when pointing to libjpeg/jdapimin: Why the "c++ plugin" category? Giovanni Manghi
07:01 AM Bug report #16326 (Feedback): QGIS segfault when pointing to libjpeg/jdapimin: Which packages did you install?
Given that this
a) only surfaces with a plugin and
b) only affects one system
mak... Matthias Kuhn
08:02 AM Bug report #14589: GetCapabilities gets cached in a confusing way (even when QGIS cache is set to 0): This is still confirmed in 2.18.4. And worst is that happens even when cache size is set 0 in QGIS general options.
... Giovanni Manghi
08:02 AM Bug report #14589: GetCapabilities gets cached in a confusing way (even when QGIS cache is set to 0): This is still confirmed in 2.18.4. And worst is that happens even when cache size is set 0 in QGIS general options.
... Giovanni Manghi
08:02 AM Bug report #14589: GetCapabilities gets cached in a confusing way (even when QGIS cache is set to 0): This is still confirmed in 2.18.4. And worst is that happens even when cache size is set 0 in QGIS general options.
... Giovanni Manghi
07:28 AM Bug report #15606 (Open): DBManager python error on master: Giovanni Manghi
07:01 AM Bug report #15606: DBManager python error on master: Yes, it was on qgis3/master... Nikolay Lebedev
06:51 AM Bug report #16292 (Closed): error merge vector layer in QGIS 2.18.4: Fixed in changeset commit:"a1e8d680897d59f66d86010a4cdcfd192e9007af". Anonymous
05:54 AM Bug report #16145: [macOS] Copy/paste table rows causes qgis to crash: didier peeters wrote:
> @Giovanni: I made a short video to show you how this happens : https://app.box.com/s/1b0pzpva... Giovanni Manghi
01:51 AM Bug report #16145: [macOS] Copy/paste table rows causes qgis to crash: @Giovanni: I made a short video to show you how this happens : https://app.box.com/s/1b0pzpva4l1gtwl0zu2z7ft6n9fgyt8u... didier peeters
01:51 AM Bug report #16338 (Closed): Problem with QGIS projects with OTF in master: This is related to:
https://github.com/qgis/QGIS/pull/4198
If you save a project in QGIS 2.x with OTF Off, in QGIS 3... Saber Razmjooei
01:36 AM Bug report #16337 (Closed): Wrong CRS displayed in status bar: This is related to the new feature (https://github.com/qgis/QGIS/pull/4198) to set the OTF on as default.
To reprod... Saber Razmjooei

2017-03-09

12:46 AM Bug report #16333: Fetch WMTS fails in Python Console (with owslib) but works through QGIS widget: Done: https://github.com/geopython/OWSLib/issues/361. geo julien
08:20 AM Bug report #16333 (Closed): Fetch WMTS fails in Python Console (with owslib) but works through QG...: Suggest opening this as a pure OWSLib ticket (https://github.com/OWSLib/issues/new) Tom Kralidis
08:20 AM Bug report #16333 (Closed): Fetch WMTS fails in Python Console (with owslib) but works through QG...: Suggest opening this as a pure OWSLib ticket (https://github.com/OWSLib/issues/new) Tom Kralidis
07:22 AM Bug report #16333 (Closed): Fetch WMTS fails in Python Console (with owslib) but works through QG...: I'm working on my plugin which can add layers from OGC services directly to Map canvas without UI step. So I use owsl... geo julien
12:35 AM Bug report #16335 (Closed): Wrong German Text in Filter Selection: Fixed in changeset commit:"7bda715ec3274b8c2cdc9c22f6b1131112e1da55". Jürgen Fischer
01:05 PM Bug report #16335 (Closed): Wrong German Text in Filter Selection: At the bottom of the DropDown List in attribute filters are two misleading transations.
The dropdown list for filter... Heinz Mutzner
03:29 PM Bug report #16336 (Closed): No values greater than 99.99 in Snapping Tolerance: It seems that values greater than 99.99 (form map units) and 100 (for pixel) are not accepted in the Snapping Toleran... matteo ghetta
01:38 PM Bug report #16247: mssql data provider: filtering layer doesn't work: You need to install SQL Server Express with Tools. A link to the setup in Microsoft download center:
https://www.micr... Thomas Schneider
12:24 PM Bug report #16247: mssql data provider: filtering layer doesn't work: sorry for the question: is there any way I can get a "test" copy/installer of mssql server with spatial support (I kn... Giovanni Manghi
12:15 PM Bug report #16247: mssql data provider: filtering layer doesn't work: I am using QGIS 2.14.12 and SQL Server 2014. Thomas Schneider
11:57 AM Bug report #16247 (Feedback): mssql data provider: filtering layer doesn't work: > The filter worked properly.
do you remember when? 2.8? Giovanni Manghi
11:57 AM Bug report #16247 (Feedback): mssql data provider: filtering layer doesn't work: > The filter worked properly.
do you remember when? 2.8? Giovanni Manghi
09:59 AM Bug report #16247: mssql data provider: filtering layer doesn't work: Tested with 2.14.12 and 2.18.4 using MSSQL 2008 R2 and MSSQL 2016
The filter worked properly. Andre Jesus
12:10 PM Bug report #16334 (Feedback): Processing - Running a model freezes QGIS: Can you attach the model (and the data, or a sample)? Giovanni Manghi
12:10 PM Bug report #16334 (Feedback): Processing - Running a model freezes QGIS: Can you attach the model (and the data, or a sample)? Giovanni Manghi
12:10 PM Bug report #16334 (Feedback): Processing - Running a model freezes QGIS: Can you attach the model (and the data, or a sample)? Giovanni Manghi
11:58 AM Bug report #16334 (Closed): Processing - Running a model freezes QGIS: When I run a model with the green arrow to the right of the file path selected, QGIS freezes.
QGIS 2.18.4, 64 bit. Magnus Nilsson
10:06 AM Feature request #15927: Y format parameter for Tile Server (XYZ) layers: Sure, here are a couple examples:
http://demo.opengeo.org/geoserver/gwc/service/tms/1.0.0/ne:ne@EPSG:900913@png/{z}/... Daniel Sánchez Pillot Gutiérrez
09:04 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: It's not related how QGIS request data from the database as all version uses the same intersects method with the same... Andre Jesus
06:48 AM Bug report #10517 (Reopened): Reading PGPASS fails on 64-Bit Version: I tested this issue with 2.18.4 and 2.14.12 and I'm also having problems, even when using only LF EOL... QGIS is extr... Jérôme Guélat
06:48 AM Bug report #10517 (Reopened): Reading PGPASS fails on 64-Bit Version: I tested this issue with 2.18.4 and 2.14.12 and I'm also having problems, even when using only LF EOL... QGIS is extr... Jérôme Guélat
06:15 AM Bug report #16165: QGIS 2.18.3 crashes on exit: So I've managed to fix this issue. Turns out it was a plugin issue, specifically "MetaSearch Catalogue Client" appea... Philip Tait
04:57 AM Bug report #16165: QGIS 2.18.3 crashes on exit: > I then went into .qgis2 and removed one after the other evry individual folder, and sub-folder. In the end,it turn... Giovanni Manghi
04:48 AM Bug report #16165: QGIS 2.18.3 crashes on exit: PS- already reported in the plugin page: #11901 Jeff Moyen
04:46 AM Bug report #16165: QGIS 2.18.3 crashes on exit: I can confirm the behaviour. Closing QGIS, even without doing anything else, results in a crash.
In fact, there are ... Jeff Moyen
05:36 AM Bug report #16266 (Closed): OWSLib failed because pyproj is missing: Fixed in 2.18 branch (commit:05e74803) Tom Kralidis
05:36 AM Bug report #16266 (Closed): OWSLib failed because pyproj is missing: Fixed in 2.18 branch (commit:05e74803) Tom Kralidis
01:55 AM Bug report #16266: OWSLib failed because pyproj is missing: Adding screen captures geo julien
01:55 AM Bug report #16266: OWSLib failed because pyproj is missing: Adding screen captures geo julien
01:55 AM Bug report #16266: OWSLib failed because pyproj is missing: Adding screen captures geo julien
01:55 AM Bug report #16266: OWSLib failed because pyproj is missing: Adding screen captures geo julien
01:53 AM Bug report #16266: OWSLib failed because pyproj is missing: The requirements for pyproj is not resolved.
pyproj is lacking in `python/ext-libs` René-Luc ReLuc
01:53 AM Bug report #16266: OWSLib failed because pyproj is missing: The requirements for pyproj is not resolved.
pyproj is lacking in `python/ext-libs` René-Luc ReLuc
01:53 AM Bug report #16266: OWSLib failed because pyproj is missing: The requirements for pyproj is not resolved.
pyproj is lacking in `python/ext-libs` René-Luc ReLuc
01:48 AM Bug report #16266: OWSLib failed because pyproj is missing: Ups, typo error on mentioned QGIS versions:
In *2.14.x* owslib version:'0.8.8' from owslib.util import HTTPError... geo julien
05:13 AM Bug report #16332: [macOS] SAGA algs not working in QGIS 2.18.x: Here is the full QGIS GUI output of SAGAs "Slope, Aspect, Curvature". The italic formatted lines are the ones coloure... Patrick Schratz
03:04 AM Bug report #16332 (Closed): [macOS] SAGA algs not working in QGIS 2.18.x: Referring to this SE question: http://gis.stackexchange.com/questions/217414/saga-algorithms-not-working-on-qgis-2-18... Patrick Schratz
04:47 AM Bug report #16048 (Reopened): Spatial select doesn't work properly on filtered sqlite layers: I did a small exercise und checked different options to import data into a sqlite database, to figure out when the de... Bernd Marcus
02:11 AM Bug report #16048 (Closed): Spatial select doesn't work properly on filtered sqlite layers: John Bryant wrote:
> I checked the QGIS export dialog - there is a SPATIAL_INDEX Layer Option, which defaults to YES.... Giovanni Manghi
02:11 AM Bug report #16048 (Closed): Spatial select doesn't work properly on filtered sqlite layers: John Bryant wrote:
> I checked the QGIS export dialog - there is a SPATIAL_INDEX Layer Option, which defaults to YES.... Giovanni Manghi
01:42 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: John Bryant wrote:
> But how does one add a spatial index in QGIS? That option is greyed out.
>
spatial indexes fo... Giovanni Manghi
03:15 AM Bug report #15315: DB-Manager Import Double: Mo Scott wrote:
> I'm sorry, I neither have a Postgis-DB nor a QGIS-Installation version higher 2.14 at hand to do so... Giovanni Manghi
03:10 AM Bug report #15315: DB-Manager Import Double: I'm sorry, I neither have a Postgis-DB nor a QGIS-Installation version higher 2.14 at hand to do some testing. As thi... Mo Scott
02:34 AM Bug report #16329 (Closed): osgeo4w64, unable to run python3 in command box: 1. Not a QGIS issue.
2. run @call py3_env.bat@ first (also @call qt5_env.bat@ if you want to use PyQt5)
3. use @pytho... Jürgen Fischer
01:05 AM Bug report #16329: osgeo4w64, unable to run python3 in command box: Some googling:
http://stackoverflow.com/questions/18946286/python3-installed-successfully-but-cannot-be-opened-in-t... Richard Duivenvoorde
02:16 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> You are right, thanks. Perhaps in the help we could add other common names for other formats... Giovanni Manghi
02:12 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: You are right, thanks. Perhaps in the help we could add other common names for other formats (geom for PostGIS, other?). Paolo Cavallini
02:16 AM Bug report #16331 (Closed): DB Manager does not show Spatialite layers spatial indexes and does n...: In DB Manager when you select a SL layer, in the "info" tab there is no information whatsoever about the spatial inde... Giovanni Manghi
02:13 AM Bug report #16330 (Closed): "Save as" to Spatialite does not create the spatial index even when t...: This leads to possible issue with selection of filtered layers are described here #16048 Giovanni Manghi
02:02 AM Bug report #16325 (Closed): Distance and angles not available for points during Advanced digitizing: Giovanni Manghi
02:01 AM Bug report #16325: Distance and angles not available for points during Advanced digitizing: it is possible, just use construction mode.
1. enable construction mode
2. click on the starting point
3. draw dista... Denis Rouzaud

2017-03-08

12:56 AM Bug report #16329 (Closed): osgeo4w64, unable to run python3 in command box: Trying to test a python problem in QGIS3 via python on cli in osgeo4w64 (installed via osgeo4w installer in c:\\osgeo... Richard Duivenvoorde
04:52 PM Bug report #14394 (Reopened): Tooltips are blank (2.14, 2.18): I'm having the same problem.
Qgis 2.14.3
Fedora 25
x86_64
English
Steps to reproduce:
1) start Qgis
2) hold mouse p... Will Kemp
04:52 PM Bug report #14394 (Reopened): Tooltips are blank (2.14, 2.18): I'm having the same problem.
Qgis 2.14.3
Fedora 25
x86_64
English
Steps to reproduce:
1) start Qgis
2) hold mouse p... Will Kemp
04:34 PM Bug report #16146: Mac OS X Snow Leopard & QGIS 2.18.3 : configuration OK but make fails: Hi Laurent,
Looks like your libspatialite and/or your libsqlite3 are not built right. @InitSpatialMetadata()@ is par... Larry Shaffer
04:07 PM Bug report #16016 (Closed): SVG menu icons on macOS do not show up: Fixed upstream with Qt 5.8.0 (tested locally). Supposedly also fixed in 5.7.2, but have not tested (as it has not yet... Larry Shaffer
04:07 PM Bug report #16016 (Closed): SVG menu icons on macOS do not show up: Fixed upstream with Qt 5.8.0 (tested locally). Supposedly also fixed in 5.7.2, but have not tested (as it has not yet... Larry Shaffer
03:10 PM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: I checked the QGIS export dialog - there is a SPATIAL_INDEX Layer Option, which defaults to YES. But even confirming ... John Bryant
03:02 PM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: But how does one add a spatial index in QGIS? That option is greyed out.
!spatial_index_greyed_out.JPG! John Bryant
02:58 PM Bug report #16048 (Feedback): Spatial select doesn't work properly on filtered sqlite layers: John Bryant wrote:
> Interesting! Thanks a lot Bernd for looking into this. In this case I created the table using th... Giovanni Manghi
02:48 PM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: Interesting! Thanks a lot Bernd for looking into this. In this case I created the table using the QGIS 'Save as' dial... John Bryant
07:20 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: Dear Giovanni,
the new title of this ticket is not correct. You can work with spatialite tables with a SRID = 0 in Q... Bernd Marcus
07:00 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: Harrissou Santanna wrote:
> I do not totally get the subtlety between sqlite and spatiaLite formats (so bear with me,... Giovanni Manghi
06:56 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: I do not totally get the subtlety between sqlite and spatiaLite formats (so bear with me, please) but if the original... Harrissou Santanna
05:32 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: Bernd Marcus wrote:
> The wrong selection of features working with filtered and non-filtered spatialite tables usualy... Giovanni Manghi
05:32 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: Bernd Marcus wrote:
> The wrong selection of features working with filtered and non-filtered spatialite tables usualy... Giovanni Manghi
04:27 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: couldn't upload the database file, one more try. Bernd Marcus
04:24 AM Bug report #16048: Spatial select doesn't work properly on filtered sqlite layers: The wrong selection of features working with filtered and non-filtered spatialite tables usualy appear by using table... Bernd Marcus
03:00 PM Bug report #16327: "Edit Create Options" dialogue doesn't handle whitespace correctly: Can't find a better category other than GUI... Giovanni Manghi
12:23 PM Bug report #16327 (Closed): "Edit Create Options" dialogue doesn't handle whitespace correctly: In the "Settings -> Options -> GDAL -> Edit Create Options" dialogue, it is possible to create new profiles with GDAL... Mira Ressel
02:48 PM Bug report #16328 (Closed): Wrong German Text in Filter Selection: Hi, sorry tickets must be filed in English. Giovanni Manghi
02:48 PM Bug report #16328 (Closed): Wrong German Text in Filter Selection: Hi, sorry tickets must be filed in English. Giovanni Manghi
01:24 PM Bug report #16328 (Closed): Wrong German Text in Filter Selection: Bei der Auswahl zum Filtern wird im Dropdown Menu rechts neben den Feldern teilweise unrichtiger Text angezeigt.
Dor... Heinz Mutzner
02:46 PM Bug report #15752: Degradation of rendering performances in MSSQL provider: > 2.8.9 is by far the fastest, but It's understandable by the amount of features added to QGIS It would slow It dow... Giovanni Manghi
01:28 PM Bug report #15752: Degradation of rendering performances in MSSQL provider: Just checking how performance went with other data providers over the 3 versions:
Using the same map but with a diff... Andre Jesus
06:44 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: Giovanni Manghi wrote:
> One question: have you any idea if this also affects other providers, like PostGIS?
It does... Andre Jesus
04:17 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: Andre Jesus wrote:
> Giovanni Manghi wrote:
> > > I know MSSQL data provider is not the focus in development but it's... Giovanni Manghi
01:49 PM Bug report #16321: ArcGISFeatureServer New Connection Not working. Cannot add a layer from service: Confirmed, investigating. Sandro Mani
01:31 PM Bug report #16321: ArcGISFeatureServer New Connection Not working. Cannot add a layer from service: OK,
I think I found the issue. It has been a while since I have used QGIS in all its workflows so it took a while to... Dave Sampson
10:36 AM Bug report #16321: ArcGISFeatureServer New Connection Not working. Cannot add a layer from service: Realated to #161321 Dave Sampson
09:13 AM Bug report #16321 (Feedback): ArcGISFeatureServer New Connection Not working. Cannot add a layer ...: As for the mapservice ticket you just created I can't replicate, kind of.
The connection works fine, the layer list ... Giovanni Manghi
08:47 AM Bug report #16321 (Closed): ArcGISFeatureServer New Connection Not working. Cannot add a layer fr...: As a QGIS user
I want to load a layer from an ArcGISFeatureServer
So that I can view the feature server layers on my ... Dave Sampson
01:30 PM Bug report #16323: ArcGISMapServer New Connection Not working. Cannot add a layer from service: OK,
I think I found the issue. It has been a while since I have used QGIS in all its workflows so it took a while to... Dave Sampson
10:36 AM Bug report #16323: ArcGISMapServer New Connection Not working. Cannot add a layer from service: Related to #16321
I just tested this another way in 2.18
* Ensured QGIS Desktop Closed
* Open QGIS Browser
* Added ... Dave Sampson
10:14 AM Bug report #16323: ArcGISMapServer New Connection Not working. Cannot add a layer from service: Thanks for testing.
A detail that i did not think mattered but may is that I am using the ditribution within OSGEO4W... Dave Sampson
08:58 AM Bug report #16323 (Feedback): ArcGISMapServer New Connection Not working. Cannot add a layer from...: works as expected here, see attached image Giovanni Manghi
08:49 AM Bug report #16323 (Closed): ArcGISMapServer New Connection Not working. Cannot add a layer from s...: As a QGIS user
I want to load a layer from an ArcGISMapServer
So that I can view the feature server layers on my ma... Dave Sampson
12:13 PM Bug report #15819: DB Manager SQL Window Not Launching: Thanks for investigating this. In my environment I have to stick with an LTR release so I'll wait for the big 3.0 to ... Frank Donnelly
03:03 AM Bug report #15819: DB Manager SQL Window Not Launching: Bernd Marcus wrote:
> I had the same error message by trying to call the sql-editor with all QGIS 2.14 versions. An u... Giovanni Manghi
03:01 AM Bug report #15819: DB Manager SQL Window Not Launching: I had the same error message by trying to call the sql-editor with all QGIS 2.14 versions. An upgrade to 2.18.4 solve... Bernd Marcus
10:57 AM Bug report #16324: RGB palettes are dropped on export: Giovanni Manghi wrote:
> not sure raster "save as" uses gdal at all.
I think so, since the "Save as" dialog offers s... Mira Ressel
09:17 AM Bug report #16324 (Open): RGB palettes are dropped on export: Luis Ressel wrote:
> Thanks for the tip. I'll admit this is a low-priority bug with many possible workarounds, but it... Giovanni Manghi
09:17 AM Bug report #16324 (Open): RGB palettes are dropped on export: Luis Ressel wrote:
> Thanks for the tip. I'll admit this is a low-priority bug with many possible workarounds, but it... Giovanni Manghi
09:14 AM Bug report #16324: RGB palettes are dropped on export: Thanks for the tip. I'll admit this is a low-priority bug with many possible workarounds, but it is nevertheless a bu... Mira Ressel
08:54 AM Bug report #16324 (Feedback): RGB palettes are dropped on export: save it using the "rendered image" option, you'll get a RGB raster that then you cna converted to palleted with the "... Giovanni Manghi
08:50 AM Bug report #16324 (Closed): RGB palettes are dropped on export: When GeoTiff rasters using an RGB palette encoding are exported using "Layer -> Save as", the palette metadata is omi... Mira Ressel
10:11 AM Bug report #16326 (Closed): QGIS segfault when pointing to libjpeg/jdapimin: This is a persistent issue on Ubuntu identified while using the QuickMapServices (QMS) add-on. QGIS crashes with a se... Spencer Gardner
09:48 AM Bug report #16325 (Feedback): Distance and angles not available for points during Advanced digiti...: Is this a missing feature or a regression of the advanced digitizing toolbar in 2.18.4? Giovanni Manghi
09:40 AM Bug report #16325 (Closed): Distance and angles not available for points during Advanced digitizing: When adding a point (just a simple temporary scratch point) it is not possible to add some distance and angles.
In ot... matteo ghetta
09:19 AM Bug report #16318: Plugin Manager: fTools and GdalTools still listed though broken: Harrissou Santanna wrote:
> Hummm... what would then be a clean installation on windows? I'm using the same osgeo4w f... Giovanni Manghi
09:17 AM Bug report #16318: Plugin Manager: fTools and GdalTools still listed though broken: Hummm... what would then be a clean installation on windows? I'm using the same osgeo4w folder for a while. Does it m... Harrissou Santanna
08:49 AM Bug report #16318 (Closed): Plugin Manager: fTools and GdalTools still listed though broken: Harrissou Santanna wrote:
> Browsing the folders reveal that both contain an empty folder named "tools". Deleting the... Giovanni Manghi
08:49 AM Bug report #16318 (Closed): Plugin Manager: fTools and GdalTools still listed though broken: Harrissou Santanna wrote:
> Browsing the folders reveal that both contain an empty folder named "tools". Deleting the... Giovanni Manghi
08:26 AM Bug report #16318: Plugin Manager: fTools and GdalTools still listed though broken: Browsing the folders reveal that both contain an empty folder named "tools". Deleting the main folder might do the tr... Harrissou Santanna
08:21 AM Bug report #16318: Plugin Manager: fTools and GdalTools still listed though broken: Does it require the user to do something particular, because I have them in the Plugin manager dialog of my today osg... Harrissou Santanna
07:56 AM Bug report #16318 (Feedback): Plugin Manager: fTools and GdalTools still listed though broken: ftools does not show anymore in 2.18.4 and both does not show anymore in master. Giovanni Manghi
07:52 AM Bug report #16318 (Closed): Plugin Manager: fTools and GdalTools still listed though broken: Given that fTools and GdalTools are removed as Core plugins and moved to Processing, shouldn't they be unavailable fr... Harrissou Santanna
08:50 AM Bug report #10459 (Closed): Clicking the georeferencer plugin doesn't result in any reaction of QGIS: Jochen Huber wrote:
> The same issue occurs with QGIS 2.18.4 on Win7x64. The Georeferencer Plugin seems to store the ... Giovanni Manghi
08:43 AM Bug report #10459 (Reopened): Clicking the georeferencer plugin doesn't result in any reaction of...: The same issue occurs with QGIS 2.18.4 on Win7x64. The Georeferencer Plugin seems to store the last window location (... Jochen Huber
08:43 AM Bug report #10459 (Reopened): Clicking the georeferencer plugin doesn't result in any reaction of...: The same issue occurs with QGIS 2.18.4 on Win7x64. The Georeferencer Plugin seems to store the last window location (... Jochen Huber
08:47 AM Bug report #16322 (Closed): make -j8 # error: @INCLUDE = /usr/src/qgis/build/master/qgsversion.in...: Building in a lean dir with 8 parallel processes failed with this error for me:... Sandro Santilli
08:39 AM Feature request #16320 (Closed): Add ESRI Featureserver, Mapserver, ImageServer layers from Metas...: as a QGIS user
I want to use metasearch to discover and access ESRI Mapserver, IMageServer and Feature server service... Dave Sampson
08:25 AM Bug report #16311: Processing Commander tiny and not resizable: Thanks for confirming and escalating. Andreas Plesch
08:16 AM Bug report #16312: missing icons in Processing script editor: The issue subsists in 2.18.4 on Gentoo. I filed a bug report:
https://bugs.gentoo.org/show_bug.cgi?id=612066
When c... Andreas Plesch
07:46 AM Bug report #16312: missing icons in Processing script editor: Andreas Plesch wrote:
> But I think it may be a platform issue and will file a bug on the gentoo bugtracker.
if it i... Giovanni Manghi
07:24 AM Bug report #16312: missing icons in Processing script editor: Will do when 2.18.4 becomes available on Gentoo. But I think it may be a platform issue and will file a bug on the ge... Andreas Plesch
08:10 AM Bug report #16314 (Closed): Processing: Get scripts /models from online collection crashes QGIS: It turns out that 2.18.4 is available on Gentoo unstable. Installing with the (non-default) webkit USE keyword on gen... Andreas Plesch
08:10 AM Bug report #16314 (Closed): Processing: Get scripts /models from online collection crashes QGIS: It turns out that 2.18.4 is available on Gentoo unstable. Installing with the (non-default) webkit USE keyword on gen... Andreas Plesch
07:25 AM Bug report #16314: Processing: Get scripts /models from online collection crashes QGIS: Will do when 2.18.4 becomes available on Gentoo. But I think it may be a platform issue and will file a bug on the ge... Andreas Plesch
07:55 AM Bug report #16319 (Closed): DXF Export generates many numbered layers (1 layer for each feature): DXF export does not generate separate layers for each chosen source layer.
Instead it generates many numbered layers... Albert van de Maat
07:44 AM Bug report #15780: QGIS 2.18 crashes while rendering (Windows 10): I did a clean install of QGIS Desktop 2.18.4 on Windows 10 64-bit.
I tried it on my topo project file containing over... JW van Aalst
06:36 AM Bug report #13080 (Rejected): QT Forms. Opening two forms using IdentifyFeatures crashes: Crashes using globals and opening multiple forms in parallel is expected.
The solution is: don't use globals (and es... Matthias Kuhn
06:36 AM Bug report #13080 (Rejected): QT Forms. Opening two forms using IdentifyFeatures crashes: Crashes using globals and opening multiple forms in parallel is expected.
The solution is: don't use globals (and es... Matthias Kuhn
05:31 AM Bug report #11293: Auto update Shows All Layers: Both Harrissou Santanna
05:05 AM Bug report #11293: Auto update Shows All Layers: Harrissou Santanna wrote:
> All the points are still valid:
> - Auto-update is on by default without filtering the ma... Giovanni Manghi
04:35 AM Bug report #11293: Auto update Shows All Layers: All the points are still valid:
- Auto-update is on by default without filtering the map: when a legend is created, a... Harrissou Santanna
04:49 AM Bug report #16317 (Open): Adding the same short_name option on multiple layers is possible: Adding the same short_name option on multiple layers is possible.
Accessing that short_name in a GetMap request resu... Tudor Bărăscu
02:58 AM Bug report #15527 (Closed): Qgis Server incomplete rendering: Indeed it will. Let's just close it then! Tudor Bărăscu
02:40 AM Bug report #15527: Qgis Server incomplete rendering: Tudor Bărăscu wrote:
> Indeed I tested also with Debian Stretch + 2.18.4 and it's good!
> However, I tested with 2.14... Giovanni Manghi
02:27 AM Bug report #15527: Qgis Server incomplete rendering: Indeed I tested also with Debian Stretch + 2.18.4 and it's good!
However, I tested with 2.14.12 (server) and the bug ... Tudor Bărăscu
02:46 AM Bug report #15470 (Closed): add part tool creates a MultiGeometry for CurvePolygon geometry type: Should be mitigated with #e7c9b74afa96261cb1f3cc2c3c631a0a034420b3 Tudor Bărăscu
02:41 AM Bug report #15482: Qgis Desktop cannot open layers from Qgis Server if the short_name option has ...: Tudor Bărăscu wrote:
> @Giovanni The issue is not reproducible anymore. I tested under 2.14 and 2.18 and everything i... Giovanni Manghi
02:32 AM Bug report #15482 (Closed): Qgis Desktop cannot open layers from Qgis Server if the short_name op...: @Giovanni The issue is not reproducible anymore. I tested under 2.14 and 2.18 and everything is working as it should. Tudor Bărăscu
02:33 AM Bug report #16316 (Closed): Attribute Table handles precision of Real type incorrectly for ShapeF...: When you create an attribute with for example 6 bytes (7 if you count the decimal point) and precision of 2 bytes, th... Jonas Van Nieuwenberg
02:20 AM Bug report #15553: QGIS Server OPACITIES parameter works only when STYLES parameter is default: The issue is still present in 2.18.4 and 2.14.12 Tudor Bărăscu
02:14 AM Bug report #11983 (Closed): pasting features into spatialite layer does not copy attibute values: I just tested again on 2.18.4 on both Windows and Linux and copy/pasting from shape/postgis to spatialite worked just... Giovanni Manghi
02:14 AM Bug report #11983 (Closed): pasting features into spatialite layer does not copy attibute values: I just tested again on 2.18.4 on both Windows and Linux and copy/pasting from shape/postgis to spatialite worked just... Giovanni Manghi
01:31 AM Feature request #16315 (Open): Proper Mask Functionality: QGIS needs the option to set vector layer or features as a mask for other layers of the users´choice.
This mask sho... Ger CO
01:25 AM Bug report #15173 (Closed): Editable View - save edit in attribute table throw error: Problem solved by using "spatialite_gui" for creating editable view. Spatial View is created from table with geometry... Jakub Kosik

2017-03-07

12:50 AM Bug report #15692 (Closed): DB-Manager freezes when running complex SQL queries: There is already a feature request asking to make possible stop queries in DB Manager (just can't find the ticket num... Giovanni Manghi
12:50 AM Bug report #15692 (Closed): DB-Manager freezes when running complex SQL queries: There is already a feature request asking to make possible stop queries in DB Manager (just can't find the ticket num... Giovanni Manghi
12:49 AM Bug report #12918 (Feedback): QGIS freezes when wheelzooming WMS layer via authenticating proxy: Hi, is this still an issue in latest qgis releases as 2.18.4 or qgis3/master? Giovanni Manghi
12:49 AM Bug report #12918 (Feedback): QGIS freezes when wheelzooming WMS layer via authenticating proxy: Hi, is this still an issue in latest qgis releases as 2.18.4 or qgis3/master? Giovanni Manghi
12:49 AM Bug report #12918 (Feedback): QGIS freezes when wheelzooming WMS layer via authenticating proxy: Hi, is this still an issue in latest qgis releases as 2.18.4 or qgis3/master? Giovanni Manghi
12:49 AM Bug report #12918 (Feedback): QGIS freezes when wheelzooming WMS layer via authenticating proxy: Hi, is this still an issue in latest qgis releases as 2.18.4 or qgis3/master? Giovanni Manghi
12:46 AM Bug report #14902 (Closed): Kind of Qgis freeze with WMS layer: I tried again on 2.18.4 on Ubuntu and Windows and it seems is not an issue anymore. Please reopen if necessary. Giovanni Manghi
12:46 AM Bug report #14902 (Closed): Kind of Qgis freeze with WMS layer: I tried again on 2.18.4 on Ubuntu and Windows and it seems is not an issue anymore. Please reopen if necessary. Giovanni Manghi
12:46 AM Bug report #14902 (Closed): Kind of Qgis freeze with WMS layer: I tried again on 2.18.4 on Ubuntu and Windows and it seems is not an issue anymore. Please reopen if necessary. Giovanni Manghi
12:46 AM Bug report #14902 (Closed): Kind of Qgis freeze with WMS layer: I tried again on 2.18.4 on Ubuntu and Windows and it seems is not an issue anymore. Please reopen if necessary. Giovanni Manghi
12:46 AM Bug report #14902 (Closed): Kind of Qgis freeze with WMS layer: I tried again on 2.18.4 on Ubuntu and Windows and it seems is not an issue anymore. Please reopen if necessary. Giovanni Manghi
12:40 AM Bug report #13362 (Closed): Composer: gridlines on worldmap disappear + exceptions in debug when ...: Richard Duivenvoorde
12:40 AM Bug report #13362: Composer: gridlines on worldmap disappear + exceptions in debug when zoomin ou...: Agreed, I do not see this anymore in current 3/master.
As this was already a corner case, let's just close it. Richard Duivenvoorde
08:38 AM Bug report #13362 (Feedback): Composer: gridlines on worldmap disappear + exceptions in debug whe...: Hi Richard,
I try the provided workflow, can see the missing lines, zoomed/panned like crazy, saved, closed qgis, no ... Giovanni Manghi
08:38 AM Bug report #13362 (Feedback): Composer: gridlines on worldmap disappear + exceptions in debug whe...: Hi Richard,
I try the provided workflow, can see the missing lines, zoomed/panned like crazy, saved, closed qgis, no ... Giovanni Manghi
08:38 AM Bug report #13362 (Feedback): Composer: gridlines on worldmap disappear + exceptions in debug whe...: Hi Richard,
I try the provided workflow, can see the missing lines, zoomed/panned like crazy, saved, closed qgis, no ... Giovanni Manghi
12:36 AM Bug report #11790 (Feedback): Python bindings for QgsDxfExport.addLayers causes crash: Hi,
what is the status of this issue? Is the patch still necessary in the latest QGIS releases like 2.18.4 or was alr... Giovanni Manghi
12:36 AM Bug report #11790 (Feedback): Python bindings for QgsDxfExport.addLayers causes crash: Hi,
what is the status of this issue? Is the patch still necessary in the latest QGIS releases like 2.18.4 or was alr... Giovanni Manghi
12:36 AM Bug report #11790 (Feedback): Python bindings for QgsDxfExport.addLayers causes crash: Hi,
what is the status of this issue? Is the patch still necessary in the latest QGIS releases like 2.18.4 or was alr... Giovanni Manghi
12:36 AM Bug report #11790 (Feedback): Python bindings for QgsDxfExport.addLayers causes crash: Hi,
what is the status of this issue? Is the patch still necessary in the latest QGIS releases like 2.18.4 or was alr... Giovanni Manghi
12:36 AM Bug report #11790 (Feedback): Python bindings for QgsDxfExport.addLayers causes crash: Hi,
what is the status of this issue? Is the patch still necessary in the latest QGIS releases like 2.18.4 or was alr... Giovanni Manghi
12:31 AM Bug report #9678 (Feedback): Python console : crash when printing from signals: Hi Hugo,
what is the status of this (old) ticket/issue? Still an issue on 2.18.4 qgis3/master? Thanks.
Note:
I chan... Giovanni Manghi
12:31 AM Bug report #9678 (Feedback): Python console : crash when printing from signals: Hi Hugo,
what is the status of this (old) ticket/issue? Still an issue on 2.18.4 qgis3/master? Thanks.
Note:
I chan... Giovanni Manghi
12:31 AM Bug report #9678 (Feedback): Python console : crash when printing from signals: Hi Hugo,
what is the status of this (old) ticket/issue? Still an issue on 2.18.4 qgis3/master? Thanks.
Note:
I chan... Giovanni Manghi
12:31 AM Bug report #9678 (Feedback): Python console : crash when printing from signals: Hi Hugo,
what is the status of this (old) ticket/issue? Still an issue on 2.18.4 qgis3/master? Thanks.
Note:
I chan... Giovanni Manghi
12:28 AM Bug report #13080 (Feedback): QT Forms. Opening two forms using IdentifyFeatures crashes: What is the status of this issue on 2.18.4 or qgis3/master? Giovanni Manghi
12:28 AM Bug report #13080 (Feedback): QT Forms. Opening two forms using IdentifyFeatures crashes: What is the status of this issue on 2.18.4 or qgis3/master? Giovanni Manghi
12:28 AM Bug report #13080 (Feedback): QT Forms. Opening two forms using IdentifyFeatures crashes: What is the status of this issue on 2.18.4 or qgis3/master? Giovanni Manghi
12:25 AM Bug report #15445 (Closed): QGIS crashes on layer.getFeatures(...) on request with order by: Does not crash on 2.18.4 (2.18 will be the next LTR), so I assume is fixed. Please reopen of necessary. Giovanni Manghi
12:25 AM Bug report #15445 (Closed): QGIS crashes on layer.getFeatures(...) on request with order by: Does not crash on 2.18.4 (2.18 will be the next LTR), so I assume is fixed. Please reopen of necessary. Giovanni Manghi
12:22 AM Bug report #15578 (Feedback): Pyqgis atlas crash on "render as HTML": What about 2.18.4 or qgis3/master? Still true? Giovanni Manghi
12:22 AM Bug report #15578 (Feedback): Pyqgis atlas crash on "render as HTML": What about 2.18.4 or qgis3/master? Still true? Giovanni Manghi
12:22 AM Bug report #15578 (Feedback): Pyqgis atlas crash on "render as HTML": What about 2.18.4 or qgis3/master? Still true? Giovanni Manghi
12:20 AM Bug report #11441 (Open): Parallel multi-core rendering glitches with OTF reprojection: Giovanni Manghi
02:42 PM Bug report #11441: Parallel multi-core rendering glitches with OTF reprojection: Still same here with 2.99 from OSGeo4W. Anita Graser
12:19 AM Bug report #16311: Processing Commander tiny and not resizable: Confirmed also on Ubuntu and Windows. Giovanni Manghi
12:19 AM Bug report #16311: Processing Commander tiny and not resizable: Confirmed also on Ubuntu and Windows. Giovanni Manghi
12:19 AM Bug report #16311: Processing Commander tiny and not resizable: Confirmed also on Ubuntu and Windows. Giovanni Manghi
12:19 AM Bug report #16311: Processing Commander tiny and not resizable: Confirmed also on Ubuntu and Windows. Giovanni Manghi
11:38 AM Bug report #16311: Processing Commander tiny and not resizable: Screenshot attached Andreas Plesch
11:36 AM Bug report #16311 (Closed): Processing Commander tiny and not resizable: In 2.18.3 the Commander input window is tiny and cannot be resized to a useful size on my system. This makes the Comm... Andreas Plesch
12:17 AM Bug report #16312 (Feedback): missing icons in Processing script editor: Cannot confirm on 2.18.4 on Ubuntu 16.04. Please try 2.18.4 and report back, thanks. Giovanni Manghi
12:17 AM Bug report #16312 (Feedback): missing icons in Processing script editor: Cannot confirm on 2.18.4 on Ubuntu 16.04. Please try 2.18.4 and report back, thanks. Giovanni Manghi
12:17 AM Bug report #16312 (Feedback): missing icons in Processing script editor: Cannot confirm on 2.18.4 on Ubuntu 16.04. Please try 2.18.4 and report back, thanks. Giovanni Manghi
11:45 AM Bug report #16312 (Closed): missing icons in Processing script editor: The Cut, Copy, Paste, Undo and Redo icons are missing in the Processing script editor. See attached screenshot . Sinc... Andreas Plesch
12:16 AM Bug report #16314 (Feedback): Processing: Get scripts /models from online collection crashes QGIS: Works fine on 2.18.4 on Ubuntu 16.04 installed from QGIS repos.
Please try 2.18.4 and report back, thanks. Giovanni Manghi
12:16 AM Bug report #16314 (Feedback): Processing: Get scripts /models from online collection crashes QGIS: Works fine on 2.18.4 on Ubuntu 16.04 installed from QGIS repos.
Please try 2.18.4 and report back, thanks. Giovanni Manghi
12:16 AM Bug report #16314 (Feedback): Processing: Get scripts /models from online collection crashes QGIS: Works fine on 2.18.4 on Ubuntu 16.04 installed from QGIS repos.
Please try 2.18.4 and report back, thanks. Giovanni Manghi
12:16 AM Bug report #16314 (Feedback): Processing: Get scripts /models from online collection crashes QGIS: Works fine on 2.18.4 on Ubuntu 16.04 installed from QGIS repos.
Please try 2.18.4 and report back, thanks. Giovanni Manghi
11:53 AM Bug report #16314 (Closed): Processing: Get scripts /models from online collection crashes QGIS: Opening (double clicking) Get script (or models) from on-line collection in the Processing tool box crashes QGIS.
He... Andreas Plesch
01:58 PM Bug report #15814: Crash in osgEarth::SpatialReference::getEllipsoid() when try to opening globe ...: What version of osgEarth is QGIS built against? Sandro Mani
11:50 AM Feature request #16313 (Open): Processing - Enhance encoding options in Import into PostGIS: In the tool Import into PostGIS in Processing, the drop down list for encoding only contains UTF-8, although it seems... Magnus Nilsson
11:15 AM Bug report #7425 (Closed): Unstable icon sizes in floating toolbars crash qgis (Win7): 1.8? :) Giovanni Manghi
11:15 AM Bug report #7425 (Closed): Unstable icon sizes in floating toolbars crash qgis (Win7): 1.8? :) Giovanni Manghi
11:15 AM Bug report #7425 (Closed): Unstable icon sizes in floating toolbars crash qgis (Win7): 1.8? :) Giovanni Manghi
11:15 AM Bug report #7425 (Closed): Unstable icon sizes in floating toolbars crash qgis (Win7): 1.8? :) Giovanni Manghi
11:09 AM Bug report #12370 (Closed): QGIS Desktop V2.8.1 crashes when I press New, Open or Save button: Very likely a local issue, and anyway now obsolete. Giovanni Manghi
11:09 AM Bug report #12370 (Closed): QGIS Desktop V2.8.1 crashes when I press New, Open or Save button: Very likely a local issue, and anyway now obsolete. Giovanni Manghi
11:09 AM Bug report #12370 (Closed): QGIS Desktop V2.8.1 crashes when I press New, Open or Save button: Very likely a local issue, and anyway now obsolete. Giovanni Manghi
11:09 AM Bug report #12370 (Closed): QGIS Desktop V2.8.1 crashes when I press New, Open or Save button: Very likely a local issue, and anyway now obsolete. Giovanni Manghi
11:05 AM Bug report #16165 (Closed): QGIS 2.18.3 crashes on exit: (very) likely depending on a 3rd party plugins: there are a few that are known to make qgis crash on exit. Please try... Giovanni Manghi
11:05 AM Bug report #16165 (Closed): QGIS 2.18.3 crashes on exit: (very) likely depending on a 3rd party plugins: there are a few that are known to make qgis crash on exit. Please try... Giovanni Manghi
11:03 AM Bug report #15606 (Feedback): DBManager python error on master: Was this on qgis3/master? Giovanni Manghi
11:03 AM Bug report #15606 (Feedback): DBManager python error on master: Was this on qgis3/master? Giovanni Manghi
11:01 AM Bug report #15240 (Closed): Crash when loading zipped ShapeFiles: Works without issues on 2.18.4 on both Windows and Ubuntu 16.04. Giovanni Manghi
11:01 AM Bug report #15240 (Closed): Crash when loading zipped ShapeFiles: Works without issues on 2.18.4 on both Windows and Ubuntu 16.04. Giovanni Manghi
11:01 AM Bug report #15240 (Closed): Crash when loading zipped ShapeFiles: Works without issues on 2.18.4 on both Windows and Ubuntu 16.04. Giovanni Manghi
11:01 AM Bug report #15240 (Closed): Crash when loading zipped ShapeFiles: Works without issues on 2.18.4 on both Windows and Ubuntu 16.04. Giovanni Manghi
11:01 AM Bug report #15240 (Closed): Crash when loading zipped ShapeFiles: Works without issues on 2.18.4 on both Windows and Ubuntu 16.04. Giovanni Manghi
10:55 AM Bug report #5794 (Closed): QGIS_mapserv crashes if I add an empty layer in the mapfile: I also tested it today, and is ok now. Giovanni Manghi
10:55 AM Bug report #5794 (Closed): QGIS_mapserv crashes if I add an empty layer in the mapfile: I also tested it today, and is ok now. Giovanni Manghi
10:49 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: Andre Jesus wrote:
> Giovanni Manghi wrote:
> > > I know MSSQL data provider is not the focus in development but it's... Giovanni Manghi
10:35 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: Giovanni Manghi wrote:
> > I know MSSQL data provider is not the focus in development but it's impossible to work wit... Andre Jesus
10:09 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: > I know MSSQL data provider is not the focus in development but it's impossible to work with It in 2.18.4.
please ... Giovanni Manghi
10:05 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: I did some more testing...
Using the same map, layers and zoom levels.
Feature list and count:
!http://i.imgur.com... Andre Jesus
10:46 AM Bug report #14961 (Closed): Snapping bug: I followed the provided steps and queries (thanks) and unless I really misunderstood the problem this seems really ok... Giovanni Manghi
10:46 AM Bug report #14961 (Closed): Snapping bug: I followed the provided steps and queries (thanks) and unless I really misunderstood the problem this seems really ok... Giovanni Manghi
10:37 AM Bug report #15242: Field Calculator problem: I'm struggling to understand the description, and also the screenshots are not helping me. Can you be more clear? Giovanni Manghi
10:37 AM Bug report #15242: Field Calculator problem: I'm struggling to understand the description, and also the screenshots are not helping me. Can you be more clear? Giovanni Manghi
10:28 AM Bug report #16145 (Feedback): [macOS] Copy/paste table rows causes qgis to crash: Just tested you scenario on macOS Sierra and QGIS 2.18.2, no crashes. Saving is quick (at least with a few tens of co... Giovanni Manghi
10:28 AM Bug report #16145 (Feedback): [macOS] Copy/paste table rows causes qgis to crash: Just tested you scenario on macOS Sierra and QGIS 2.18.2, no crashes. Saving is quick (at least with a few tens of co... Giovanni Manghi
10:16 AM Bug report #14505 (Feedback): Crash when loading raster layer with debug version of QT: Is this still the case on 2.18.4 or qgis3/master? Giovanni Manghi
10:14 AM Bug report #12701 (Feedback): QGIS crashes when trying to add ODBC new layer: If anyway will provide me a way to test odbc connections with real daya I will be happy to test.
I tried with a Postg... Giovanni Manghi
09:24 AM Bug report #16306 (Closed): Inaccessible window when using external monitor: Todd Langland wrote:
> Giovanni Manghi wrote:
> > Todd Langland wrote:
> > > Continuing to experiment and I should ad... Giovanni Manghi
09:24 AM Bug report #16306 (Closed): Inaccessible window when using external monitor: Todd Langland wrote:
> Giovanni Manghi wrote:
> > Todd Langland wrote:
> > > Continuing to experiment and I should ad... Giovanni Manghi
09:16 AM Bug report #16306: Inaccessible window when using external monitor: Giovanni Manghi wrote:
> Todd Langland wrote:
> > Continuing to experiment and I should add one more caveat, it appea... Todd Langland
09:09 AM Bug report #16306: Inaccessible window when using external monitor: Todd Langland wrote:
> Continuing to experiment and I should add one more caveat, it appears to only happen when the ... Giovanni Manghi
09:01 AM Bug report #16306: Inaccessible window when using external monitor: Continuing to experiment and I should add one more caveat, it appears to only happen when the QGIS window is not on t... Todd Langland
08:53 AM Bug report #16306: Inaccessible window when using external monitor: not sure how to replicate. Giovanni Manghi
08:52 AM Bug report #16306 (Feedback): Inaccessible window when using external monitor: Just tried on macOS 10.12 with an external LCD and had no issues. Giovanni Manghi
08:52 AM Bug report #16306 (Feedback): Inaccessible window when using external monitor: Just tried on macOS 10.12 with an external LCD and had no issues. Giovanni Manghi
08:47 AM Bug report #16306 (Closed): Inaccessible window when using external monitor: Wasn't able to find an existing issue related to this, so apologies if it exists somewhere.
When using the 'Add vect... Todd Langland
09:21 AM Bug report #13081 (Closed): Zonal Statistics miscalculates when handling polygons without raster ...: Results are correct on 2.18.4 on both Linux and Windows. Giovanni Manghi
09:21 AM Bug report #13081 (Closed): Zonal Statistics miscalculates when handling polygons without raster ...: Results are correct on 2.18.4 on both Linux and Windows. Giovanni Manghi
09:21 AM Bug report #13081 (Closed): Zonal Statistics miscalculates when handling polygons without raster ...: Results are correct on 2.18.4 on both Linux and Windows. Giovanni Manghi
09:21 AM Bug report #13081 (Closed): Zonal Statistics miscalculates when handling polygons without raster ...: Results are correct on 2.18.4 on both Linux and Windows. Giovanni Manghi
09:19 AM Feature request #16310 (Closed): Persist folder location to save/restore batch processing config ...: When I load a saved batch processing configuration file the Open File dialog always starts in my home directory, even... Spencer Gardner
09:11 AM Bug report #16309 (Closed): Saved batch processing inputs are not restored in a useful state: I have a batch processing routine that I have saved to .json format for repeated use. When I reload the batch configu... Spencer Gardner
09:08 AM Feature request #16308 (Open): Add tab navigation to batch processing: Presently, pressing tab on the batch processing interface changes the selection of the entire row. It would make much... Spencer Gardner
09:05 AM Feature request #16307 (Open): Batch Processing Can Only Remove Last Entry: If I want to remove a line from my batch process, the interface only allows me to remove the last line of the entire ... Spencer Gardner
08:50 AM Bug report #8332 (Feedback): QGIS uses comma as decimal separator for shapefile attribute data: > Attached are some test data and the minimal script to reproduce the issue. You just need a locale that uses a comm... Giovanni Manghi
08:50 AM Bug report #8332 (Feedback): QGIS uses comma as decimal separator for shapefile attribute data: > Attached are some test data and the minimal script to reproduce the issue. You just need a locale that uses a comm... Giovanni Manghi
08:50 AM Bug report #8332 (Feedback): QGIS uses comma as decimal separator for shapefile attribute data: > Attached are some test data and the minimal script to reproduce the issue. You just need a locale that uses a comm... Giovanni Manghi
08:46 AM Bug report #13061 (Feedback): QGIS crashes on close if data was read through GDAL in Python Console: This still affects 2.18.4, but what about qgis3 master? Giovanni Manghi
08:46 AM Bug report #13061 (Feedback): QGIS crashes on close if data was read through GDAL in Python Console: This still affects 2.18.4, but what about qgis3 master? Giovanni Manghi
08:46 AM Bug report #13061 (Feedback): QGIS crashes on close if data was read through GDAL in Python Console: This still affects 2.18.4, but what about qgis3 master? Giovanni Manghi
08:19 AM Bug report #14588 (Feedback): WIndows 7 freezes when using 'Pick color' tool: Andre Jesus wrote:
> Confirmed in 2.14.4 and 2.16.0 too (Windows 10)
Cannot confirm on 2.18.4 on Windows or Linux. P... Giovanni Manghi
08:19 AM Bug report #14588 (Feedback): WIndows 7 freezes when using 'Pick color' tool: Andre Jesus wrote:
> Confirmed in 2.14.4 and 2.16.0 too (Windows 10)
Cannot confirm on 2.18.4 on Windows or Linux. P... Giovanni Manghi
08:11 AM Bug report #15576 (Closed): QGIS is lagging after a few saves in PostGIS layers: Closing for lack of feedback. Symptoms like this ones were reported several times, most of them the problem was a 3rd... Giovanni Manghi
08:11 AM Bug report #15576 (Closed): QGIS is lagging after a few saves in PostGIS layers: Closing for lack of feedback. Symptoms like this ones were reported several times, most of them the problem was a 3rd... Giovanni Manghi
08:05 AM Bug report #15539 (Closed): QGIS Desktop 2.14.6-2 Windows 10 32 Bit Crash on GeoTIFF load: Very likely a local issue, but glad you find a have to have it work as expected. Giovanni Manghi
08:05 AM Bug report #15539 (Closed): QGIS Desktop 2.14.6-2 Windows 10 32 Bit Crash on GeoTIFF load: Very likely a local issue, but glad you find a have to have it work as expected. Giovanni Manghi
08:03 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template: Still pretty much the case in all QGIS Server installations on headless Linux Servers. Giovanni Manghi
08:03 AM Bug report #9295: GetPrint causes segfault if HTML formatted text is used in the template: Still pretty much the case in all QGIS Server installations on headless Linux Servers. Giovanni Manghi
07:46 AM Bug report #16067 (Closed): Geometry checker crashes/seg fault: Retested on the same platform on 2.18.4 and it worked as expected. Thanks! Giovanni Manghi
07:46 AM Bug report #16067 (Closed): Geometry checker crashes/seg fault: Retested on the same platform on 2.18.4 and it worked as expected. Thanks! Giovanni Manghi
07:37 AM Bug report #16077 (Feedback): PostGIS layer loaded from Python Console can cause System Freeze: Please try on the latest versions available 2.18.4/master (qgis3) but also add the specific steps to allow us replica... Giovanni Manghi
07:34 AM Bug report #14390 (Feedback): Layer id generation prone to collisisions and overwrite in asynchro...: Did anything changed in latest QGIS releases? Could you submit a patch? Giovanni Manghi
07:34 AM Bug report #14390 (Feedback): Layer id generation prone to collisisions and overwrite in asynchro...: Did anything changed in latest QGIS releases? Could you submit a patch? Giovanni Manghi
07:34 AM Bug report #14390 (Feedback): Layer id generation prone to collisisions and overwrite in asynchro...: Did anything changed in latest QGIS releases? Could you submit a patch? Giovanni Manghi
07:34 AM Bug report #14390 (Feedback): Layer id generation prone to collisisions and overwrite in asynchro...: Did anything changed in latest QGIS releases? Could you submit a patch? Giovanni Manghi
07:34 AM Bug report #14390 (Feedback): Layer id generation prone to collisisions and overwrite in asynchro...: Did anything changed in latest QGIS releases? Could you submit a patch? Giovanni Manghi
07:32 AM Bug report #15580: Closing "measure angle" causes crash on multiple displays: Confirmed on 2.18.2 on macOS Sierra Giovanni Manghi
07:32 AM Bug report #15580: Closing "measure angle" causes crash on multiple displays: Confirmed on 2.18.2 on macOS Sierra Giovanni Manghi
07:32 AM Bug report #15580: Closing "measure angle" causes crash on multiple displays: Confirmed on 2.18.2 on macOS Sierra Giovanni Manghi
07:32 AM Bug report #15580: Closing "measure angle" causes crash on multiple displays: Confirmed on 2.18.2 on macOS Sierra Giovanni Manghi
07:28 AM Bug report #15689 (Closed): crashing when opening a project containing WMS layers: I played a while with the attached project, adding other wms layers, reprojecting, etc. No crashes on 2.18.4 on Ubunt... Giovanni Manghi
07:28 AM Bug report #15689 (Closed): crashing when opening a project containing WMS layers: I played a while with the attached project, adding other wms layers, reprojecting, etc. No crashes on 2.18.4 on Ubunt... Giovanni Manghi
07:18 AM Bug report #13986: Server segfaults when requesting certain GetLegendGraphics without bbox: Seems still the case on 2.18.4 and Ubuntu 16.04 Giovanni Manghi
07:18 AM Bug report #13986: Server segfaults when requesting certain GetLegendGraphics without bbox: Seems still the case on 2.18.4 and Ubuntu 16.04 Giovanni Manghi
07:18 AM Bug report #13986: Server segfaults when requesting certain GetLegendGraphics without bbox: Seems still the case on 2.18.4 and Ubuntu 16.04 Giovanni Manghi
07:04 AM Bug report #13982 (Feedback): QGIS crashes when plt.savefig() Matplotlib function is called: Is this still a problem in recent QGIS releases? Thanks. Giovanni Manghi
07:03 AM Bug report #13741 (Closed): Spatialite moving fields: Using recent QGIS releases this (and similar) issues seems to have "gone", at least I cannot replicate them anymore.
... Giovanni Manghi
06:48 AM Bug report #14214 (Feedback): Crash at startup on Windows Server 2008 r2: I can't really test this scenario. I can't see a reason why QGIS should not install on Windows Server 2008, but maybe... Giovanni Manghi
06:44 AM Bug report #14210 (Closed): QGIS adds NODATA values when saving rasters with "Save as...": works fine on 2.18.4 and master. Giovanni Manghi
06:44 AM Bug report #14210 (Closed): QGIS adds NODATA values when saving rasters with "Save as...": works fine on 2.18.4 and master. Giovanni Manghi
06:38 AM Bug report #16298 (Closed): add support for HTTP Basic Authentication: Implemented in master. Docs pending per https://github.com/qgis/QGIS-Documentation/pull/1733 Tom Kralidis
06:38 AM Bug report #16298 (Closed): add support for HTTP Basic Authentication: Implemented in master. Docs pending per https://github.com/qgis/QGIS-Documentation/pull/1733 Tom Kralidis
06:35 AM Bug report #15546 (Closed): Crash when rendering a polygon layer with style and labels: cannot replicate in any of the scenarios (with the provided data and project) on qgis 2.18.4
Please reopen if necess... Giovanni Manghi
06:35 AM Bug report #15546 (Closed): Crash when rendering a polygon layer with style and labels: cannot replicate in any of the scenarios (with the provided data and project) on qgis 2.18.4
Please reopen if necess... Giovanni Manghi
06:16 AM Bug report #16305 (Closed): WMS GetLegend Fails in QGIS 2.99: As a QGIS user
I want to access a WMS and have a legend appear in the Layers panel
So that I can match the feature ... Dave Sampson
05:38 AM Bug report #14881 (Open): Segmentation fault in QWebPage::staticMetaObjectExtraData: Giovanni Manghi
05:35 AM Bug report #14881: Segmentation fault in QWebPage::staticMetaObjectExtraData: I still care about QGIS 2.14 since that will be included in Debian stretch. Bas Couwenberg
04:52 AM Bug report #14881: Segmentation fault in QWebPage::staticMetaObjectExtraData: Bas Couwenberg wrote:
> The report is for QGIS 2.14 on Debian testing using the packages from Debian (not the qgis.or... Giovanni Manghi
04:44 AM Bug report #14881: Segmentation fault in QWebPage::staticMetaObjectExtraData: The report is for QGIS 2.14 on Debian testing using the packages from Debian (not the qgis.org packages).'
`WITH_QTW... Bas Couwenberg
04:24 AM Bug report #14881 (Feedback): Segmentation fault in QWebPage::staticMetaObjectExtraData: Cannot see any issue on 2.18.4 on Ubuntu 16.04, using the qgis repositories + ubuntugis.
A clear way to replicate th... Giovanni Manghi
04:24 AM Bug report #14881 (Feedback): Segmentation fault in QWebPage::staticMetaObjectExtraData: Cannot see any issue on 2.18.4 on Ubuntu 16.04, using the qgis repositories + ubuntugis.
A clear way to replicate th... Giovanni Manghi
05:31 AM Bug report #15590 (Feedback): m:n relationships in QGIS cause mini dump and crash: Is this still true on 2.18.4/master?
without a sample project and data it will be hard to allow us/me replicate the ... Giovanni Manghi
05:29 AM Bug report #15315 (Feedback): DB-Manager Import Double: This would eventually configure as regression, especially if still confirmed on 2.18.4
Can you please attach sample ... Giovanni Manghi
05:29 AM Bug report #15315 (Feedback): DB-Manager Import Double: This would eventually configure as regression, especially if still confirmed on 2.18.4
Can you please attach sample ... Giovanni Manghi
05:29 AM Bug report #15315 (Feedback): DB-Manager Import Double: This would eventually configure as regression, especially if still confirmed on 2.18.4
Can you please attach sample ... Giovanni Manghi
05:24 AM Bug report #14059 (Closed): QGIS Server crash with OTF active and layer without features: Cannot replicate with QGIS Desktop/Server 2.18.4
please reopen if necessary. Giovanni Manghi
05:24 AM Bug report #14059 (Closed): QGIS Server crash with OTF active and layer without features: Cannot replicate with QGIS Desktop/Server 2.18.4
please reopen if necessary. Giovanni Manghi
05:12 AM Bug report #16253: Issues with Postgis table having timestamp as primary key: Redoute Tortenboxer wrote:
> Please reopen this ticket, I cannot change status.
the ticket is still open. When I wil... Giovanni Manghi
05:09 AM Bug report #16253: Issues with Postgis table having timestamp as primary key: Please reopen this ticket, I cannot change status. Kai Borgolte
05:11 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...: No improvements whatsoever in QGIS 2.18.4 or master. Giovanni Manghi
05:11 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...: No improvements whatsoever in QGIS 2.18.4 or master. Giovanni Manghi
05:11 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...: No improvements whatsoever in QGIS 2.18.4 or master. Giovanni Manghi
04:59 AM Bug report #13336: Allow raster calculator with huge raster inputs: > If needed I can share the rasters, they are about 700MB each (compressed).
I would like to give them a try, thanks! Giovanni Manghi
04:59 AM Bug report #13336 (Feedback): Allow raster calculator with huge raster inputs: Please try the NEW QGIS raster calculator available in the Processing toolbox of QGIS master (QGIS3). Giovanni Manghi
04:56 AM Bug report #15426 (Closed): Map composer - to foreground something: duplicate of #16303 Giovanni Manghi
04:56 AM Bug report #15426 (Closed): Map composer - to foreground something: duplicate of #16303 Giovanni Manghi
04:50 AM Bug report #15684: Crash when creating snapshot with vector layer from command line: Confirmed on 2.18.4 Giovanni Manghi
04:50 AM Bug report #15684: Crash when creating snapshot with vector layer from command line: Confirmed on 2.18.4 Giovanni Manghi
04:32 AM Bug report #16187: Expression Dialog causing minidump and crash when field aliases are in use: The behavior described in #16302 is the same. Simon McGowan
04:12 AM Bug report #16187: Expression Dialog causing minidump and crash when field aliases are in use: maybe related to #16302 Giovanni Manghi
04:31 AM Bug report #14294 (Closed): Measure Tool: This sounds more like a question for the users or developers mailing lists rather than a bug report.
Anyway if you st... Giovanni Manghi
04:31 AM Bug report #14294 (Closed): Measure Tool: This sounds more like a question for the users or developers mailing lists rather than a bug report.
Anyway if you st... Giovanni Manghi
04:26 AM Bug report #15884 (Feedback): memory access exception at exit qgis 2.18: Can you please add detailed steps on how to replicate or just try 2.18.4/master and see if this is still valid? thanks. Giovanni Manghi
04:26 AM Bug report #15884 (Feedback): memory access exception at exit qgis 2.18: Can you please add detailed steps on how to replicate or just try 2.18.4/master and see if this is still valid? thanks. Giovanni Manghi
04:22 AM Bug report #14983 (Closed): relation editor widget in custom form can cause crash: it should be in 2.18.4 Giovanni Manghi
04:21 AM Bug report #8923: SpatiaLite 4: added attributes disappear: I also do not see this problem any longer (Linux Mint with QGIS 2.18.4) Micha Silver
03:13 AM Bug report #8923 (Feedback): SpatiaLite 4: added attributes disappear: Matthias, this is a lengthy thread and I have only tested after the original description.
On 2.18.4 I can't see anym... Giovanni Manghi
03:13 AM Bug report #8923 (Feedback): SpatiaLite 4: added attributes disappear: Matthias, this is a lengthy thread and I have only tested after the original description.
On 2.18.4 I can't see anym... Giovanni Manghi
03:13 AM Bug report #8923 (Feedback): SpatiaLite 4: added attributes disappear: Matthias, this is a lengthy thread and I have only tested after the original description.
On 2.18.4 I can't see anym... Giovanni Manghi
03:13 AM Bug report #8923 (Feedback): SpatiaLite 4: added attributes disappear: Matthias, this is a lengthy thread and I have only tested after the original description.
On 2.18.4 I can't see anym... Giovanni Manghi
03:13 AM Bug report #8923 (Feedback): SpatiaLite 4: added attributes disappear: Matthias, this is a lengthy thread and I have only tested after the original description.
On 2.18.4 I can't see anym... Giovanni Manghi
04:21 AM Bug report #15493 (Closed): Freezes when attempting to edit rule based styles from layer 'Propert...: duplicte of #15317 Giovanni Manghi
04:21 AM Bug report #15493 (Closed): Freezes when attempting to edit rule based styles from layer 'Propert...: duplicte of #15317 Giovanni Manghi
04:20 AM Bug report #15543 (Closed): Wrong Unicode handling of metadata plugin fields: The attached plugins works without any issue in 2.18.4. Please reopen if necessary. Giovanni Manghi
04:20 AM Bug report #15543 (Closed): Wrong Unicode handling of metadata plugin fields: The attached plugins works without any issue in 2.18.4. Please reopen if necessary. Giovanni Manghi
04:20 AM Bug report #15543 (Closed): Wrong Unicode handling of metadata plugin fields: The attached plugins works without any issue in 2.18.4. Please reopen if necessary. Giovanni Manghi
04:20 AM Bug report #15543 (Closed): Wrong Unicode handling of metadata plugin fields: The attached plugins works without any issue in 2.18.4. Please reopen if necessary. Giovanni Manghi
04:15 AM Bug report #15780 (Feedback): QGIS 2.18 crashes while rendering (Windows 10): Please also try in clean environment, with no 3rd party plugins and possibly by wiping the entire .qgis2 folder.
Wit... Giovanni Manghi
04:15 AM Bug report #15780 (Feedback): QGIS 2.18 crashes while rendering (Windows 10): Please also try in clean environment, with no 3rd party plugins and possibly by wiping the entire .qgis2 folder.
Wit... Giovanni Manghi
04:13 AM Feature request #16304 (Open): implement QgsNetworkAccessManager for HTTP: MetaSearch leverages OWSLib for CSW request/response handling which results in also using OWSLib's HTTP request/respo... Tom Kralidis
04:12 AM Bug report #16302: Quick calculation bar causes QGIS crash when updating fields with aliases.: possibly related to #16187 Giovanni Manghi
03:05 AM Bug report #16302: Quick calculation bar causes QGIS crash when updating fields with aliases.: Here is an example file:
Contin. column is aliased to Continent.
# Open the attribute for europe
# Make it editable
... Saber Razmjooei
03:05 AM Bug report #16302: Quick calculation bar causes QGIS crash when updating fields with aliases.: Here is an example file:
Contin. column is aliased to Continent.
# Open the attribute for europe
# Make it editable
... Saber Razmjooei
03:05 AM Bug report #16302: Quick calculation bar causes QGIS crash when updating fields with aliases.: Here is an example file:
Contin. column is aliased to Continent.
# Open the attribute for europe
# Make it editable
... Saber Razmjooei
02:58 AM Bug report #16302 (Open): Quick calculation bar causes QGIS crash when updating fields with aliases.: Lukasz Debek wrote:
> Giovanni Manghi wrote:
> > sorry to ask, what do you mean with "quick calculator"?
>
> I mean ... Giovanni Manghi
02:58 AM Bug report #16302 (Open): Quick calculation bar causes QGIS crash when updating fields with aliases.: Lukasz Debek wrote:
> Giovanni Manghi wrote:
> > sorry to ask, what do you mean with "quick calculator"?
>
> I mean ... Giovanni Manghi
02:51 AM Bug report #16302: Quick calculation bar causes QGIS crash when updating fields with aliases.: Giovanni Manghi wrote:
> sorry to ask, what do you mean with "quick calculator"?
I mean bar that shows up in attribu... Lukasz Debek
02:36 AM Bug report #16302 (Feedback): Quick calculation bar causes QGIS crash when updating fields with a...: Saber Razmjooei wrote:
> Hi Gio,
>
> It is top of the attribute table.
then I cannot confirm.
Please attach sample ... Giovanni Manghi
02:33 AM Bug report #16302 (Open): Quick calculation bar causes QGIS crash when updating fields with aliases.: Hi Gio,
It is top of the attribute table. Saber Razmjooei
02:28 AM Bug report #16302 (Feedback): Quick calculation bar causes QGIS crash when updating fields with a...: sorry to ask, what do you mean with "quick calculator"? Giovanni Manghi
02:19 AM Bug report #16302 (Closed): Quick calculation bar causes QGIS crash when updating fields with ali...: Using quick calculation bar for updating fields with aliases causes QGIS crash.
To reproduce the problem add a layer... Lukasz Debek
04:10 AM Bug report #15317 (Feedback): the window Layer Properties gets irresponsive: I have no issues here on Ubuntu and Kubuntu 16.04 on 2.18.4 Giovanni Manghi
04:10 AM Bug report #15317 (Feedback): the window Layer Properties gets irresponsive: I have no issues here on Ubuntu and Kubuntu 16.04 on 2.18.4 Giovanni Manghi
04:09 AM Bug report #15466 (Closed): Freezes when attempting to edit rule based styles after adding field ...: duplicate of #15317 Giovanni Manghi
04:09 AM Bug report #15466 (Closed): Freezes when attempting to edit rule based styles after adding field ...: duplicate of #15317 Giovanni Manghi
03:33 AM Bug report #16115 (Feedback): different (wrong) output of 'join attributes by location' when used...: Please attach sample project/data. Giovanni Manghi
03:33 AM Bug report #16115 (Feedback): different (wrong) output of 'join attributes by location' when used...: Please attach sample project/data. Giovanni Manghi
03:33 AM Bug report #16111 (Feedback): different (wrong) output of bufferalgorithm when used in graphical ...: Please attach sample project/data. Giovanni Manghi
03:33 AM Bug report #16111 (Feedback): different (wrong) output of bufferalgorithm when used in graphical ...: Please attach sample project/data. Giovanni Manghi
03:24 AM Bug report #9474 (Closed): New vertices added to polygons break shape file topology: This is very similar to several other reports filed in the "recent" past. This kind of issues should all be hopefully... Giovanni Manghi
03:24 AM Bug report #9474 (Closed): New vertices added to polygons break shape file topology: This is very similar to several other reports filed in the "recent" past. This kind of issues should all be hopefully... Giovanni Manghi
03:20 AM Bug report #16133: Wrong default extension picked for table outputs: In master "statistics by category" does not work regardless if the output is temporary or if the user chooses a locat... Giovanni Manghi
03:20 AM Bug report #16133: Wrong default extension picked for table outputs: In master "statistics by category" does not work regardless if the output is temporary or if the user chooses a locat... Giovanni Manghi
03:08 AM Bug report #15193 (Open): Print composer performance at startup: Giovanni Manghi
03:00 AM Bug report #15193: Print composer performance at startup: Maybe slightly better in master, but I've got some big fixes for this coming soon (next 2 weeks). Until then we shoul... Nyall Dawson
01:26 AM Bug report #15193 (Feedback): Print composer performance at startup: Reinhard Reiterer wrote:
> Hi Nyall, is the small improvement already implemented in QGIS 2.16.0?
with the provided ... Giovanni Manghi
01:26 AM Bug report #15193 (Feedback): Print composer performance at startup: Reinhard Reiterer wrote:
> Hi Nyall, is the small improvement already implemented in QGIS 2.16.0?
with the provided ... Giovanni Manghi
01:26 AM Bug report #15193 (Feedback): Print composer performance at startup: Reinhard Reiterer wrote:
> Hi Nyall, is the small improvement already implemented in QGIS 2.16.0?
with the provided ... Giovanni Manghi
02:56 AM Bug report #16060 (Open): Multi geometry on oracle table: Giovanni Manghi
02:51 AM Bug report #16060: Multi geometry on oracle table: Same problem on 2.18.4. dany Lefeuvre
02:54 AM Bug report #13382 (Closed): Processing installing is failed with non-ascii characters on windows: New versions of Processing are not shipped anymore as a python plugins upgrades. Giovanni Manghi
02:54 AM Bug report #13382 (Closed): Processing installing is failed with non-ascii characters on windows: New versions of Processing are not shipped anymore as a python plugins upgrades. Giovanni Manghi
02:54 AM Bug report #13382 (Closed): Processing installing is failed with non-ascii characters on windows: New versions of Processing are not shipped anymore as a python plugins upgrades. Giovanni Manghi
02:53 AM Bug report #13957 (Feedback): [Project Properties] certain ellipsoids selected cause transform in...: Is this the case on recent qgis releases (includes master for QGIS3)? Giovanni Manghi
02:53 AM Bug report #13957 (Feedback): [Project Properties] certain ellipsoids selected cause transform in...: Is this the case on recent qgis releases (includes master for QGIS3)? Giovanni Manghi
02:51 AM Bug report #13542 (Feedback): Postgis view breaks Qgis Server WFS: Works like a charm here on Ubuntu 16.04 and QGIS 2.18.4
Please leave feedback. Giovanni Manghi
02:51 AM Bug report #13542 (Feedback): Postgis view breaks Qgis Server WFS: Works like a charm here on Ubuntu 16.04 and QGIS 2.18.4
Please leave feedback. Giovanni Manghi
02:51 AM Bug report #13542 (Feedback): Postgis view breaks Qgis Server WFS: Works like a charm here on Ubuntu 16.04 and QGIS 2.18.4
Please leave feedback. Giovanni Manghi
02:44 AM Bug report #16303 (Feedback): Map Composer - foregrounding: Cannot replicate here with simple test projects. To trouble shoot this it would be needed more details and likely a s... Giovanni Manghi
02:37 AM Bug report #16303 (Closed): Map Composer - foregrounding: If I want to foreground e.g. the north arrow in a map composer, QGis works fine. If I want to foreground a second ele... Magdalena Blank
02:34 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> Sorry to insist: it works for many data sources, not for PostGIS, without user warnings.
th... Giovanni Manghi
02:29 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Sorry to insist: it works for many data sources, not for PostGIS, without user warnings. Paolo Cavallini
01:55 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> As said, this requires a patch, as for the user it does not work: what is the purpose of clo... Giovanni Manghi
01:53 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: As said, this requires a patch, as for the user it does not work: what is the purpose of closing it? Paolo Cavallini
01:51 AM Bug report #16301 (Closed): OGR Buffer fails in Processing when datasource is PostGIS: Giovanni Manghi
01:50 AM Bug report #16301 (Reopened): OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini
01:49 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> Probably adding a short help and a note to the param would help.
sure
Giovanni Manghi
01:49 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> Anyway, IMHO this is still a bug: every command should work with the default values.
feel f... Giovanni Manghi
01:45 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Anyway, IMHO this is still a bug: every command should work with the default values. Paolo Cavallini
01:44 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Probably adding a short help and a note to the param would help.
Thanks. Paolo Cavallini
01:40 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: Paolo Cavallini wrote:
> The default should work, and the user should be warned what to type.
> As it is, the tool is... Giovanni Manghi
01:31 AM Bug report #16301: OGR Buffer fails in Processing when datasource is PostGIS: The default should work, and the user should be warned what to type.
As it is, the tool is unusable by most. Paolo Cavallini
01:21 AM Bug report #16301 (Closed): OGR Buffer fails in Processing when datasource is PostGIS: The user must specify the geometry column name. Giovanni Manghi
01:21 AM Bug report #16301 (Closed): OGR Buffer fails in Processing when datasource is PostGIS: The user must specify the geometry column name. Giovanni Manghi
02:22 AM Bug report #12657 (Open): Processing/GRASS don't work under Windows if username or input/output p...: Giovanni Manghi
02:20 AM Bug report #13293: WCS server broken on Windows: Still the same on 2.18.4. It worked as expected once, not sure if there is any interest in fixing it anyway... Giovanni Manghi
02:20 AM Bug report #13293: WCS server broken on Windows: Still the same on 2.18.4. It worked as expected once, not sure if there is any interest in fixing it anyway... Giovanni Manghi
02:20 AM Bug report #13293: WCS server broken on Windows: Still the same on 2.18.4. It worked as expected once, not sure if there is any interest in fixing it anyway... Giovanni Manghi
02:15 AM Bug report #16087: QGIS crashes when using QgsGeometryRubberBand in pyqgis: Giovanni Manghi wrote:
> > Great to hear. I can verify that it works in 2.99.0-Master (c1ede00) but can you tell me i... Casper Børgesen
02:02 AM Bug report #16087: QGIS crashes when using QgsGeometryRubberBand in pyqgis: > Great to hear. I can verify that it works in 2.99.0-Master (c1ede00) but can you tell me if the changes has made i... Giovanni Manghi
01:59 AM Bug report #16087: QGIS crashes when using QgsGeometryRubberBand in pyqgis: Giovanni Manghi wrote:
> spoke with a dev and he says that the last line now should be just
>
> rb.setGeometry(geom.... Casper Børgesen
02:14 AM Bug report #11293 (Feedback): Auto update Shows All Layers: What is the status of this issue in recent QGIS releases? Giovanni Manghi
02:14 AM Bug report #11293 (Feedback): Auto update Shows All Layers: What is the status of this issue in recent QGIS releases? Giovanni Manghi
02:14 AM Bug report #11293 (Feedback): Auto update Shows All Layers: What is the status of this issue in recent QGIS releases? Giovanni Manghi
01:54 AM Bug report #13963 (Closed): QGIS greadily allocates memory and crashes when editing moderately la...: baditaflorin - wrote:
> Tested in 2.14.3 on the Canada provinces and the results are horrible.
>
> If i delete less... Giovanni Manghi
01:47 AM Bug report #15934: QGIS crahes when deleting items in the print composer: I tested you sample project and data, an on both 2.18.4/linux and master/windows deleting objects from composers didn... Giovanni Manghi
01:46 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> ...sample files send by mail. Please do not share the files!
with the provided project an... Giovanni Manghi
01:38 AM Bug report #15499 (Closed): Qgis Desktop 2.14.5 and 2.16 Projects with Multiple Composers Loading...: There have been several improvements in both 2.18.* and master (qgis3) and all the provided projects with/without lay... Giovanni Manghi
01:38 AM Bug report #10828 (Closed): project loading and adding/removing layers is slow if project has com...: There have been several improvements in both 2.18.* and master (qgis3) and all the provided projects with/without lay... Giovanni Manghi
01:38 AM Bug report #10828 (Closed): project loading and adding/removing layers is slow if project has com...: There have been several improvements in both 2.18.* and master (qgis3) and all the provided projects with/without lay... Giovanni Manghi
01:38 AM Bug report #10828 (Closed): project loading and adding/removing layers is slow if project has com...: There have been several improvements in both 2.18.* and master (qgis3) and all the provided projects with/without lay... Giovanni Manghi
01:19 AM Bug report #15299 (Closed): While opening projects: "Loading composer" leads to crash: This loads in master. Also because of other tickets is clear that loading projects have been much improved in master.... Giovanni Manghi
01:19 AM Bug report #15299 (Closed): While opening projects: "Loading composer" leads to crash: This loads in master. Also because of other tickets is clear that loading projects have been much improved in master.... Giovanni Manghi
01:19 AM Bug report #15299 (Closed): While opening projects: "Loading composer" leads to crash: This loads in master. Also because of other tickets is clear that loading projects have been much improved in master.... Giovanni Manghi

2017-03-06

12:55 AM Bug report #16300 (Closed): Processing: error when right clicking on any of the Molels > Tools: Cherry-picked commit:1da60c5 as commit:610976ab Jürgen Fischer
12:55 AM Bug report #16300 (Closed): Processing: error when right clicking on any of the Molels > Tools: Cherry-picked commit:1da60c5 as commit:610976ab Jürgen Fischer
12:42 AM Bug report #16300: Processing: error when right clicking on any of the Molels > Tools: Please set the priority tag when are regressions. Giovanni Manghi
12:42 AM Bug report #16300: Processing: error when right clicking on any of the Molels > Tools: Please set the priority tag when are regressions. Giovanni Manghi
12:12 AM Bug report #16300 (Closed): Processing: error when right clicking on any of the Molels > Tools: ... Paolo Cavallini
12:48 AM Bug report #16301 (Closed): OGR Buffer fails in Processing when datasource is PostGIS: See details here: https://lists.osgeo.org/pipermail/qgis-developer/2017-March/047329.html Paolo Cavallini
12:36 AM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server: The server should be online again - I'll make sure to monitor its status the upcoming month and keep it online. Robin Houtmeyers
10:13 AM Bug report #13255: Some WFS data not displayed from LuciadLightspeed WFS server: Robin Houtmeyers wrote:
> I investigated this a bit further for the cities layer. Based on the server logs. the only ... Giovanni Manghi
12:04 AM Bug report #16299 (Closed): Processing: make URL to take Models from on-line collections configur...: The URL to take Models from on-line collections should be configurable. AFAICT it is now hardcoded. Paolo Cavallini
05:26 PM Bug report #15795: Color Select in MacOS: No Giovanni. It's an annoying issue but since 2.18.2 it does not freeze QGIS anymore (It was freezing in version 2.18... Rhenriques Henriques
05:13 PM Bug report #15795: Color Select in MacOS: Rhenriques Henriques wrote:
> Hi Giovanni
>
> Thank you so much for the priority change.
no problem! I will also ... Giovanni Manghi
05:02 PM Bug report #15795: Color Select in MacOS: Hi Giovanni
Thank you so much for the priority change. This issue is not solved in 2.18.2. The system color picker s... Rhenriques Henriques
04:40 PM Bug report #15977 (Feedback): Crash when saving new rows in MSSQL layer with a join: > There are currently no nightlies of master for windows. The last qgis-dev build are from the late master_2 branch... Giovanni Manghi
04:40 PM Bug report #15977 (Feedback): Crash when saving new rows in MSSQL layer with a join: > There are currently no nightlies of master for windows. The last qgis-dev build are from the late master_2 branch... Giovanni Manghi
04:03 PM Bug report #16243 (Feedback): Crash while using Geo-reference Layer: Can you provide the raster, the gcp points and georeferencer config details? Giovanni Manghi
04:03 PM Bug report #16243 (Feedback): Crash while using Geo-reference Layer: Can you provide the raster, the gcp points and georeferencer config details? Giovanni Manghi
04:03 PM Bug report #16243 (Feedback): Crash while using Geo-reference Layer: Can you provide the raster, the gcp points and georeferencer config details? Giovanni Manghi
03:42 PM Bug report #15738 (Closed): Repeated segfault when merging and editing polygons: Just tested on the same platform on 2.18.4, no crashes. Please reopen if necessary. Giovanni Manghi
03:42 PM Bug report #15738 (Closed): Repeated segfault when merging and editing polygons: Just tested on the same platform on 2.18.4, no crashes. Please reopen if necessary. Giovanni Manghi
03:33 PM Bug report #16124 (Feedback): Style made with 2.12 causes crash: No crashes on 2.18.4 on the same platform. Giovanni Manghi
03:22 PM Bug report #15527 (Feedback): Qgis Server incomplete rendering: Just tested the attached project data on Ubuntu 16.04 and QGIS Desktop/Server 2.18.4 and is all ok. Giovanni Manghi
03:22 PM Bug report #15527 (Feedback): Qgis Server incomplete rendering: Just tested the attached project data on Ubuntu 16.04 and QGIS Desktop/Server 2.18.4 and is all ok. Giovanni Manghi
03:07 PM Bug report #13288 (Closed): Geopackage support not working in QGIS Browser: Nyall Dawson wrote:
> Not a blocker anymore. These subissues should really be split off into their own issues.
in 2.... Giovanni Manghi
03:07 PM Bug report #13288 (Closed): Geopackage support not working in QGIS Browser: Nyall Dawson wrote:
> Not a blocker anymore. These subissues should really be split off into their own issues.
in 2.... Giovanni Manghi
03:04 PM Bug report #11441 (Feedback): Parallel multi-core rendering glitches with OTF reprojection: Anita Graser wrote:
> Same issue in qgis-rel-dev
what about the (qgis3) master? any change? Giovanni Manghi
03:04 PM Bug report #11441 (Feedback): Parallel multi-core rendering glitches with OTF reprojection: Anita Graser wrote:
> Same issue in qgis-rel-dev
what about the (qgis3) master? any change? Giovanni Manghi
03:04 PM Bug report #11441 (Feedback): Parallel multi-core rendering glitches with OTF reprojection: Anita Graser wrote:
> Same issue in qgis-rel-dev
what about the (qgis3) master? any change? Giovanni Manghi
03:04 PM Bug report #11441 (Feedback): Parallel multi-core rendering glitches with OTF reprojection: Anita Graser wrote:
> Same issue in qgis-rel-dev
what about the (qgis3) master? any change? Giovanni Manghi
03:01 PM Bug report #16123: Processing Build Virtual Raster not opening: On 2.18.4 the error is different (in both cases also Windows is affected)
Traceback (most recent call last):
File ... Giovanni Manghi
03:01 PM Bug report #16123: Processing Build Virtual Raster not opening: On 2.18.4 the error is different (in both cases also Windows is affected)
Traceback (most recent call last):
File ... Giovanni Manghi
02:51 PM Bug report #16100 (Feedback): switching between layer styles breaks relation widget: Does it affect also master? Giovanni Manghi
02:51 PM Bug report #16100 (Feedback): switching between layer styles breaks relation widget: Does it affect also master? Giovanni Manghi
02:51 PM Bug report #16100 (Feedback): switching between layer styles breaks relation widget: Does it affect also master? Giovanni Manghi
02:43 PM Bug report #15759 (Closed): SVG Path(s) continuously increasing duplicates: Does not happen anymore in 2.18(.4). Giovanni Manghi
02:43 PM Bug report #15759 (Closed): SVG Path(s) continuously increasing duplicates: Does not happen anymore in 2.18(.4). Giovanni Manghi
02:43 PM Bug report #15759 (Closed): SVG Path(s) continuously increasing duplicates: Does not happen anymore in 2.18(.4). Giovanni Manghi
02:38 PM Bug report #16112: Exported SLD size or displacementX/Y are not reimported correctly due to mm/pi...: Hi Luigi,
if is a regression this must be tagged as "severe", we use "high" for issues causing crashes and data corr... Giovanni Manghi
02:34 PM Bug report #10068 (Feedback): QGIS server caches layers with same ID but in different projects as...: Still an issue in 2.18.4? Giovanni Manghi
02:34 PM Bug report #10068 (Feedback): QGIS server caches layers with same ID but in different projects as...: Still an issue in 2.18.4? Giovanni Manghi
02:24 PM Bug report #16087 (Closed): QGIS crashes when using QgsGeometryRubberBand in pyqgis: spoke with a dev and he says that the last line now should be just
rb.setGeometry(geom.geometry())
after some API c... Giovanni Manghi
02:24 PM Bug report #16087 (Closed): QGIS crashes when using QgsGeometryRubberBand in pyqgis: spoke with a dev and he says that the last line now should be just
rb.setGeometry(geom.geometry())
after some API c... Giovanni Manghi
02:22 PM Bug report #13065: WFS 1.0.0 Client requests with a GML component fail against Geoserver (lack na...: Can anyone advice about the necessary steps to try replicate this issue? Giovanni Manghi
01:59 PM Bug report #8073 (Open): Crash when loading PostGIS raster: Giovanni Manghi
11:16 AM Bug report #8073: Crash when loading PostGIS raster: It get loaded now, but then crashes when zooming:... Paolo Cavallini
10:15 AM Bug report #8073: Crash when loading PostGIS raster: Paolo Cavallini wrote:
> Currently impossible to test because of #15910
what about 2.18.4? we need to test this also... Giovanni Manghi
01:51 PM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: Johanna Botman wrote:
> OK, so this introduces sqlite into the mix.
>
no it does not. The sqlite datasources here a... Giovanni Manghi
01:18 PM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: OK, so this introduces sqlite into the mix.
My concerns were with MSSQL and QGIS and that this would be a deal break... Johanna Botman
10:01 AM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: Johanna Botman wrote:
> In Step 2, you ask to load sqlite files as part of the testing process.
>
> Your bug report ... Andre Jesus
04:10 AM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: Johanna Botman wrote:
> In Step 2, you ask to load sqlite files as part of the testing process.
>
> Your bug report ... Giovanni Manghi
01:43 PM Bug report #16298: add support for HTTP Basic Authentication: Pull request: https://github.com/qgis/QGIS/pull/4228
TODO: docs update. Tom Kralidis
01:37 PM Bug report #16298 (Closed): add support for HTTP Basic Authentication: Per subject. Tom Kralidis
10:19 AM Bug report #16068 (Open): getFeatures() as well as spartial indices are inaccurate with memory la...: Giovanni Manghi
10:18 AM Bug report #14420: WFS-T client sends columns in the wrong order: Any feedback about this issue? thanks! Giovanni Manghi
10:17 AM Bug report #16205 (Closed): composer template items with file link not saved as case sensitive: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:17 AM Bug report #16205 (Closed): composer template items with file link not saved as case sensitive: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:16 AM Bug report #16039 (Open): QGIS crash when loading Geomedia mdb, ogr2ogr works fine: Giovanni Manghi
10:14 AM Bug report #9231 (Closed): DescribeFeatureType request timed out while opening WFS: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:14 AM Bug report #9231 (Closed): DescribeFeatureType request timed out while opening WFS: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:14 AM Bug report #10541: WFS-T client looses precision when editing geometries: Martin/Richard, any feedback about 2.18.4/master? Thanks! Giovanni Manghi
10:09 AM Bug report #15431 (Closed): qgis-providers / libspatialite packaging issue: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:09 AM Bug report #15431 (Closed): qgis-providers / libspatialite packaging issue: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:07 AM Bug report #16045 (Closed): QGIS Referencer: Tranformed Failed: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:07 AM Bug report #16045 (Closed): QGIS Referencer: Tranformed Failed: Closing for lack of feedback, please reopen if necessary. Giovanni Manghi
10:06 AM Bug report #16060: Multi geometry on oracle table: dany Lefeuvre wrote:
> The problem existed in 2.16, I don't test in LTR version
please test also with 2.18.4 as it w... Giovanni Manghi
10:04 AM Bug report #16297 (Closed): (macOS) layers imported into a Spatialite Database with DB manager ar...: This has been seen on QGIS 2.18.4 on macOS. The same seems ok on other platforms.
It was also ok on macOS with 2.14.... Giovanni Manghi
10:00 AM Bug report #16275: The variables pane of composer item is always empty and read only: Tested again on 3 different opearating systems, no problems whatsoever here.
At this point a screencast would help..... Giovanni Manghi
09:45 AM Bug report #16275: The variables pane of composer item is always empty and read only: No any specific steps to reproduce. I am create empty project and then create composer with empty title. Then i'm add... Andrey Maiorov
03:58 AM Bug report #16275: The variables pane of composer item is always empty and read only: Andrey Maiorov wrote:
> Add and delete buttons in variables pane are disabled.
with any project, even starting from ... Giovanni Manghi
09:44 AM Bug report #15752: Degradation of rendering performances in MSSQL provider: Latest update: Using 2.18.4
Render time seems to keep rising every update.
Every relatively big layer I have now be... Andre Jesus
09:27 AM Bug report #16180 (Feedback): WMS browser panel loads wrong layer: Tobias Wendorff wrote:
> Richard Duivenvoorde wrote:
> > A legend is always loaded as QGIS just loads the GetLegendGr... Giovanni Manghi
09:07 AM Bug report #16248: Processing / Import layer in PostGIS: didier peeters wrote:
> Thanks for this fast answer.
>
> I made some more test on other systems:
> Other Mac 10.12... Giovanni Manghi
09:01 AM Bug report #16296: Windows: Cannot use anymore d&d in DB Manager to import a layer from Spatialit...: The same error shows when trying to import from GPKG to SL or PostGIS (and again only on Windows). Giovanni Manghi
08:53 AM Bug report #16296 (Closed): Windows: Cannot use anymore d&d in DB Manager to import a layer from ...: This seems to happen only on *Windows* (both Standalone and osgeo4w) as on other platforms (Linux, macOS) seems ok.
... Giovanni Manghi
08:54 AM Bug report #16258 (Closed): MapTips dont work on OSX: I'm sorry, we forgot to activate map tips in the options. Georg Wicke
08:33 AM Bug report #13762 (Closed): Error accessing external WMS server -- WMS provider: Cannot calculate...: This seems now ok on both 2.18.4 and master. Giovanni Manghi
08:33 AM Bug report #13762 (Closed): Error accessing external WMS server -- WMS provider: Cannot calculate...: This seems now ok on both 2.18.4 and master. Giovanni Manghi
08:11 AM Bug report #14981 (Closed): Import of Shapefile to Geopackage-Database in DB-Manager fails: replaced by #16295 Giovanni Manghi
08:11 AM Bug report #14981 (Closed): Import of Shapefile to Geopackage-Database in DB-Manager fails: replaced by #16295 Giovanni Manghi
08:11 AM Bug report #16295 (Closed): DB Manager: error importing data into GPKG connections: The same type of errors shows regardless the input datasource and regardless the operation is done by D&D or by using... Giovanni Manghi
07:15 AM Bug report #16241: Missing labels in form from joined table: Same observation on QGis 2.18 on Windows.
Same observation with a csv file coded in ISO-8859-1.
Same with a joined ta... didier peeters
06:45 AM Bug report #15969 (Closed): categorized labeled layers with virtual fields crash qgis: Giovanni Manghi
06:15 AM Bug report #15969: categorized labeled layers with virtual fields crash qgis: Tested it again with a fresh intalled QGIS and no crash happens.
Also no crash on this machine, when i install the sa... Gerhard Spieles
04:23 AM Bug report #15969: categorized labeled layers with virtual fields crash qgis: Gerhard Spieles wrote:
> Just tested it with 2.18.4, win 10 and QGIS crash when toggling e.g the layer "second", cate... Giovanni Manghi
06:43 AM Bug report #16294: Crash dumped: Minidump Written to C...: Louw Muller wrote:
> Thanks for the quick feedback!
>
> My responses below based on information requested
>
> 1. ... Giovanni Manghi
06:43 AM Bug report #16294: Crash dumped: Minidump Written to C...: Louw Muller wrote:
> Thanks for the quick feedback!
>
> My responses below based on information requested
>
> 1. ... Giovanni Manghi
06:05 AM Bug report #16294: Crash dumped: Minidump Written to C...: Thanks for the quick feedback!
My responses below based on information requested
1. specify the platform: QGIS ... Louw Muller
05:37 AM Bug report #16294 (Feedback): Crash dumped: Minidump Written to C...: Hi,
can you please:
specify the platform
specify the category (are we speaking of the print composer?)
specify the ... Giovanni Manghi
05:33 AM Bug report #16294 (Closed): Crash dumped: Minidump Written to C...: _I hope I am submitting to the right place - it's been hectic trying to get to reporting an issue.
Well, here it i... Louw Muller
04:45 AM Bug report #16293: gdalwarp issues with the "te" parameter: also seen this, but probably not related
Traceback (most recent call last):
File "/usr/share/qgis/python/plugins/pr... Giovanni Manghi
04:44 AM Bug report #16293: gdalwarp issues with the "te" parameter: Seen here on wgs84 maps. Giovanni Manghi
04:37 AM Bug report #16293 (Closed): gdalwarp issues with the "te" parameter: 2017-03-03T12:59:32 0 gdalwarp -ot Float32 -s_srs EPSG:4326 -t_srs
EPSG:3857 -r near -of GTiff -te 18.6662979442 45.... Giovanni Manghi
04:33 AM Bug report #15463: Layer "Scale dependent visibility" doesn't work anymore since 2.16: Confirmed here too. Giovanni Manghi
04:33 AM Bug report #15463: Layer "Scale dependent visibility" doesn't work anymore since 2.16: Confirmed here too. Giovanni Manghi
04:33 AM Bug report #15463: Layer "Scale dependent visibility" doesn't work anymore since 2.16: Confirmed here too. Giovanni Manghi
04:18 AM Bug report #15775: Zoom to selection zooms more than needed: Harrissou Santanna wrote:
> Weird...
> I just ran @qgis --defaultui --nocustomization --noplugins@ (altogether and s... Giovanni Manghi
04:17 AM Bug report #16287 (Feedback): New SpatiaLite layer creates incompatible layer: Please attach sample data and exact steps to replicate. I cannot replicate here with sample data I use for tests. Giovanni Manghi
04:15 AM Bug report #16191 (Closed): Zonal statistics "not a sequence" error: Ulrich Berger wrote:
> I found out, that after simply replacing the old outdated
> =>> file .../.qgis2/python/plug... Giovanni Manghi
04:15 AM Bug report #16191 (Closed): Zonal statistics "not a sequence" error: Ulrich Berger wrote:
> I found out, that after simply replacing the old outdated
> =>> file .../.qgis2/python/plug... Giovanni Manghi
02:44 AM Bug report #16191: Zonal statistics "not a sequence" error: I found out, that after simply replacing the old outdated
=>> file .../.qgis2/python/plugins/processing/tools/rast... Ulrich Berger
04:11 AM Bug report #16028 (Feedback): Metasearch/QGIS3: failing view results as xml: Giovanni Manghi
04:02 AM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...: Reinhard Reiterer wrote:
> Here comes a workaround for the missing sequence ...created with a lot of help from gis.st... Giovanni Manghi
03:53 AM Bug report #16277 (Feedback): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by P...: Only master is affected or also 2.18.4? Giovanni Manghi
03:53 AM Bug report #16277 (Feedback): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by P...: Only master is affected or also 2.18.4? Giovanni Manghi
03:53 AM Bug report #16277 (Feedback): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by P...: Only master is affected or also 2.18.4? Giovanni Manghi
03:52 AM Bug report #16276 (Feedback): Processing Gdal Translate: Only master is affected or also 2.18.4? Giovanni Manghi
03:52 AM Bug report #16276 (Feedback): Processing Gdal Translate: Only master is affected or also 2.18.4? Giovanni Manghi
03:52 AM Bug report #16276 (Feedback): Processing Gdal Translate: Only master is affected or also 2.18.4? Giovanni Manghi
03:41 AM Bug report #16049: Opening a lot of JPG rasters all at once causes crash on Linux: Well, the project I have had all the trouble with has 750 aerial photos totalling 6 GB. It is slow to update when I z... Patrick Dunford
02:38 AM Bug report #16292 (Closed): error merge vector layer in QGIS 2.18.4: When merging vector layers in the latest version (2.18.4) I get following error: global name 'dataobjects' is not def... Pieter Brusselman
02:07 AM Bug report #16291 (Closed): Warp (reproject) Raster Filename Error: When you try to reproject a Raster and the filename has an underline in it you'll get the Error:
"ERROR 6: Invali... Rainer Spalt

2017-03-05

09:58 PM Feature request #16290 (Closed): Processing: warn user when units are in degrees: It is very easy to get wrong when doing analyses if map units are in degrees (one common case: buffer > user type 100... Paolo Cavallini
06:18 PM Bug report #16028: Metasearch/QGIS3: failing view results as xml: Richard: can you try master branch again? Should be fixed now. Tom Kralidis
06:07 AM Bug report #16028: Metasearch/QGIS3: failing view results as xml: Richard: thanks for the info. Looks like MetaSearch needs a Python 2 to 3 migration. Tom Kralidis
01:40 PM Feature request #16289 (Closed): Allow multiple output categories in Processing - Extract by attr...: It should be possible to configure more than one category of output in the tool "Extract by attribute". Currently, I ... Magnus Nilsson
01:16 PM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: In Step 2, you ask to load sqlite files as part of the testing process.
Your bug report says MSSQL. It is the issue ... Johanna Botman
01:14 PM Feature request #16288 (Rejected): Expose attributes in processing modeler: The attributes of the incoming data should be exposed in the modeler. That would make it easier to follow the data th... Magnus Nilsson
12:33 PM Bug report #15969: categorized labeled layers with virtual fields crash qgis: Just tested it with 2.18.4, win 10 and QGIS crash when toggling e.g the layer "second", categorie 1 from "on" to "off... Gerhard Spieles
06:07 AM Bug report #16231 (Closed): Metasearch: Add WMS/WMTS and WFS does not work: Tom Kralidis
05:40 AM Bug report #16231: Metasearch: Add WMS/WMTS and WFS does not work: Thanks Tom for checking. Testing with a fresh `--configpath` indeed does not show the issue. This may therefore be du... Paolo Cavallini
05:10 AM Bug report #16231: Metasearch: Add WMS/WMTS and WFS does not work: Paolo: thanks for the info. I cannot reproduce even when starting 2.18 with @--lang it@. Can you provide more specifi... Tom Kralidis
05:03 AM Bug report #12299 (Closed): Connection error when using German umlaut in search string: Tom Kralidis
05:00 AM Bug report #16176 (Closed): Metasearch plugin help fails to work in master: Fixed in 2.14 branch, 2.18 branch and master. Will be available on the next plugin release of MetaSearch or 2.14.13/2... Tom Kralidis
05:00 AM Bug report #16176 (Closed): Metasearch plugin help fails to work in master: Fixed in 2.14 branch, 2.18 branch and master. Will be available on the next plugin release of MetaSearch or 2.14.13/2... Tom Kralidis
04:59 AM Bug report #16261 (Closed): metasearch fails when catalogue entry provides full GetCapabilities U...: Implemented in 2.14 branch, 2.18 branch and master. Will be available on the next plugin release of MetaSearch or 2.1... Tom Kralidis
04:59 AM Bug report #16261 (Closed): metasearch fails when catalogue entry provides full GetCapabilities U...: Implemented in 2.14 branch, 2.18 branch and master. Will be available on the next plugin release of MetaSearch or 2.1... Tom Kralidis
03:15 AM Bug report #16287 (Closed): New SpatiaLite layer creates incompatible layer: It is possible to create a new SpatiaLite layer via dialog, still it produces an error message. Also it is not possib... marisn -

2017-03-04

12:47 AM Bug report #16286 (Closed): Renaming a schema does not work as expected: When renaming a PostgreSQL/PostGIS schema (pgAdmin III, DB-Manager, Browser panel...), sequences still show the previ... R. R.
12:21 AM Bug report #16275: The variables pane of composer item is always empty and read only: Add and delete buttons in variables pane are disabled. Andrey Maiorov
06:45 PM Bug report #16275: The variables pane of composer item is always empty and read only: Can't reproduce on any platform or qgis version!
Please provide step by step instructions on how to reproduce, or a ... Nyall Dawson
12:12 AM Feature request #16285: Add SQL window to browser panel: !https://issues.qgis.org/attachments/10793/16285.png! R. R.
12:12 AM Feature request #16285 (Open): Add SQL window to browser panel: SSIA... R. R.
11:57 PM Feature request #16284 (Open): Add a rename option when copying layers by drag and drop in the br...: SSIA... R. R.
11:50 PM Bug report #16283 (Closed): Renaming a PostGIS table in the browser does not work as expected: When users rename a PostGIS table in the browser, the primary key, the index and the sequence of the table are not re... R. R.
06:13 PM Bug report #15463 (Reopened): Layer "Scale dependent visibility" doesn't work anymore since 2.16: Hello,
I am having the same issue with 2.18.3 and 2.18.4 (Windows 10, 64 bits), with both Shapefiles and Postgres la... Jean-Gabriel JGH
06:13 PM Bug report #15463 (Reopened): Layer "Scale dependent visibility" doesn't work anymore since 2.16: Hello,
I am having the same issue with 2.18.3 and 2.18.4 (Windows 10, 64 bits), with both Shapefiles and Postgres la... Jean-Gabriel JGH
06:13 PM Bug report #15463 (Reopened): Layer "Scale dependent visibility" doesn't work anymore since 2.16: Hello,
I am having the same issue with 2.18.3 and 2.18.4 (Windows 10, 64 bits), with both Shapefiles and Postgres la... Jean-Gabriel JGH
06:13 PM Bug report #15463 (Reopened): Layer "Scale dependent visibility" doesn't work anymore since 2.16: Hello,
I am having the same issue with 2.18.3 and 2.18.4 (Windows 10, 64 bits), with both Shapefiles and Postgres la... Jean-Gabriel JGH
02:22 PM Bug report #16282 (Open): Browser drag and drop issues: The drag and drop function suffers from some severe issues. When copying a PostGIS table the name of the PK column is... R. R.
01:37 PM Bug report #16049: Opening a lot of JPG rasters all at once causes crash on Linux: This is not a hardware issue. ECW files work fine. I'll do some tests next week. R. R.
01:06 PM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...: Here comes a workaround for the missing sequence ...created with a lot of help from gis.stackexchange.com. R. R.
01:06 PM Bug report #6798: when copying a table by d&d from one schema to another the serial property is l...: Here comes a workaround for the missing sequence ...created with a lot of help from gis.stackexchange.com. R. R.
11:36 AM Feature request #16281 (Rejected): Allow unconnected tools in processing models: We should allow unconnected tools in a model. Sometimes, I find a tool that I think might be useful later, but I can´... Magnus Nilsson
09:33 AM Bug report #16180: WMS browser panel loads wrong layer: Richard Duivenvoorde wrote:
> A legend is always loaded as QGIS just loads the GetLegendGraphics request.
> The layer... Tobias Wendorff
09:24 AM Bug report #16180: WMS browser panel loads wrong layer: A legend is always loaded as QGIS just loads the GetLegendGraphics request.
The layers are scale dependent, so QGIS r... Richard Duivenvoorde
03:42 AM Feature request #16280 (Rejected): Clone a tool in processing modeler: I think that it should be possible to clone a tool in the modeler. That way, you can copy/paste a preconfigured tool ... Magnus Nilsson
03:35 AM Feature request #16279 (Open): Resizing tools in processing modeler: I would like to be able to resize the tools (at least up to a certain limit) in the modeler, since they sometimes are... Magnus Nilsson

2017-03-03

11:59 PM Feature request #16278 (Open): Spatial Bookmark Panel: add more precision & user interactivity: Based on experience in daily work with QGIS, I've got this feature request to "Spatial Bookmark Panel":
# Don't clip... Tobias Wendorff
11:51 PM Bug report #16180: WMS browser panel loads wrong layer: I thought an animated GIF would make it easier to understand for all languages, but okay - let's try it in English :)... Tobias Wendorff
11:20 PM Bug report #16180: WMS browser panel loads wrong layer: Ah... NOW I get an image:
https://www.wms.nrw.de/umwelt/laerm?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetMap&BBOX=51.42312... Richard Duivenvoorde
11:12 PM Bug report #16180: WMS browser panel loads wrong layer: Hi,
I tried to reproduce your issue, but to be honest I'm even not able to see the image you get in your animated gi... Richard Duivenvoorde
02:40 PM Bug report #16049: Opening a lot of JPG rasters all at once causes crash on Linux: If you mean it slows down a lot, what are the specs of your system.
My Windows system is running Windows 10, with br... Patrick Dunford
06:38 AM Bug report #16049: Opening a lot of JPG rasters all at once causes crash on Linux: Loading many .jpg tiles makes QGIS (2.18) quite unusable here on Windows 7. R. R.
05:45 AM Bug report #16049 (Open): Opening a lot of JPG rasters all at once causes crash on Linux: I can see it happen on Linux. On Windows seems ok. Not a regression anyway, older releases also affected. Giovanni Manghi
05:45 AM Bug report #16049 (Open): Opening a lot of JPG rasters all at once causes crash on Linux: I can see it happen on Linux. On Windows seems ok. Not a regression anyway, older releases also affected. Giovanni Manghi
05:45 AM Bug report #16049 (Open): Opening a lot of JPG rasters all at once causes crash on Linux: I can see it happen on Linux. On Windows seems ok. Not a regression anyway, older releases also affected. Giovanni Manghi
02:31 PM Bug report #16275: The variables pane of composer item is always empty and read only: I now can confirm on a ubuntu 16.04 that has no relation with the Windows computer. Surprisingly, it's with a build o... Harrissou Santanna
12:04 PM Bug report #16275: The variables pane of composer item is always empty and read only: Can't confirm on windows either (and I use this feature all the time with multiple different projects). Might be a pl... Nyall Dawson
08:38 AM Bug report #16275 (Feedback): The variables pane of composer item is always empty and read only: I cannot confirm on Win7 and Linux. Giovanni Manghi
07:47 AM Bug report #16275: The variables pane of composer item is always empty and read only: I can confirm on a Windows 10 too: none of the Items in print composer has its variables frame populated (see screens... Harrissou Santanna
07:47 AM Bug report #16275: The variables pane of composer item is always empty and read only: I can confirm on a Windows 10 too: none of the Items in print composer has its variables frame populated (see screens... Harrissou Santanna
07:47 AM Bug report #16275: The variables pane of composer item is always empty and read only: I can confirm on a Windows 10 too: none of the Items in print composer has its variables frame populated (see screens... Harrissou Santanna
06:18 AM Bug report #16275: The variables pane of composer item is always empty and read only: Sorry, but I can't edit my ticket.
Please update it:
Category: Map Composer / Printing
Platform: Win x64
Platform ver... Andrey Maiorov
03:51 AM Bug report #16275: The variables pane of composer item is always empty and read only: Could you please set the proper category and platform/version when filing tickets? thanks. Giovanni Manghi
03:24 AM Bug report #16275 (Closed): The variables pane of composer item is always empty and read only: The variables pane of composer item is always empty and read only. Andrey Maiorov
10:17 AM Bug report #16277 (Closed): Processing "Gdal Clip Vector Layer By Extent" and "Clip Vector by Pol...: Both algorithms fail during the running giving both this error:
@2017-03-03T13:23:50 0 ogr2ogr -spat 1.65316901408... matteo ghetta
10:08 AM Bug report #16276 (Closed): Processing Gdal Translate: When trying to use the gdal translate format of raster files, no matter what kind of file it is (tiff, hdr, etc..) an... matteo ghetta
08:41 AM Bug report #15775: Zoom to selection zooms more than needed: Weird...
I just ran @qgis --defaultui --nocustomization --noplugins@ (altogether and separately) and adding the laye... Harrissou Santanna
08:26 AM Bug report #15775: Zoom to selection zooms more than needed: Harrissou Santanna wrote:
> I added some dummy data that produces this bug (actually it happens with any data) and a ... Giovanni Manghi
06:49 AM Bug report #15775: Zoom to selection zooms more than needed: I added some dummy data that produces this bug (actually it happens with any data) and a screenshot. Still failing zo... Harrissou Santanna
06:49 AM Bug report #15775: Zoom to selection zooms more than needed: I added some dummy data that produces this bug (actually it happens with any data) and a screenshot. Still failing zo... Harrissou Santanna
06:39 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: ...sample files send by mail. Please do not share the files! R. R.
03:50 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> Win7 - 64bit
can you share (even privately) the project and data and layout that are caus... Giovanni Manghi
03:25 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Win7 - 64bit R. R.
03:25 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> Exporting an A3 sheet containing raster images at 300 dpi crashes QGIS 2.18.4. Windows say... Giovanni Manghi
03:25 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> Exporting an A3 sheet containing raster images at 300 dpi crashes QGIS 2.18.4. Windows say... Giovanni Manghi
03:25 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> Exporting an A3 sheet containing raster images at 300 dpi crashes QGIS 2.18.4. Windows say... Giovanni Manghi
03:24 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Reinhard Reiterer wrote:
> Exporting an A3 sheet containing raster images at 300 dpi crashes QGIS 2.18.4. Windows say... Giovanni Manghi
03:16 AM Bug report #15855: Composer -> Export as PDF produced bigger file/crash qgis: Exporting an A3 sheet containing raster images at 300 dpi crashes QGIS 2.18.4. Windows says 'not enough memory' after... R. R.
02:18 AM Bug report #15855 (Feedback): Composer -> Export as PDF produced bigger file/crash qgis: Can the reporter give feedback about QGIS 2.18.4? I just tried to print a large map (A0) with aerial images and the o... Giovanni Manghi
05:43 AM Bug report #16254 (Closed): clipping a CORINE landcover geotiff raster with a polygon misses a dr...: Davor Lister wrote:
> I managed to clip the raster on a different computer, and with QGIS 2.14 on it. :)
>
> On the ... Giovanni Manghi
05:43 AM Bug report #16254 (Closed): clipping a CORINE landcover geotiff raster with a polygon misses a dr...: Davor Lister wrote:
> I managed to clip the raster on a different computer, and with QGIS 2.14 on it. :)
>
> On the ... Giovanni Manghi
04:27 AM Bug report #13294 (Closed): WMS extent/coordinates wrong on Windows: works as expected on qgis server 2.18.4 Giovanni Manghi
04:27 AM Bug report #13294 (Closed): WMS extent/coordinates wrong on Windows: works as expected on qgis server 2.18.4 Giovanni Manghi
03:57 AM Bug report #12553: Features are not rendered (at certain scales) and cannot be selectd/identified...: Will try to manage a new sample dataset to prove this issue. The problem has been certainly seen on 2.14 and 2.18 too. Giovanni Manghi
03:57 AM Bug report #12553: Features are not rendered (at certain scales) and cannot be selectd/identified...: Will try to manage a new sample dataset to prove this issue. The problem has been certainly seen on 2.14 and 2.18 too. Giovanni Manghi
03:57 AM Bug report #12553: Features are not rendered (at certain scales) and cannot be selectd/identified...: Will try to manage a new sample dataset to prove this issue. The problem has been certainly seen on 2.14 and 2.18 too. Giovanni Manghi
03:37 AM Bug report #16273: Configure the visibility of columns in attribute table works only at the secon...: No longer reproduce. I will look for steps Andrey Maiorov
03:34 AM Bug report #16273 (Closed): Configure the visibility of columns in attribute table works only at ...: Andrey Maiorov
03:22 AM Bug report #16273 (Closed): Configure the visibility of columns in attribute table works only at ...: Configure the visibility of columns in attribute table works only at the second attempt. Try to hide some columns in ... Andrey Maiorov
03:23 AM Bug report #16274 (Closed): Reference point property of the composer item is not working properly: Reference point property of the composer item is not working properly. Create any item on composer and change the ref... Andrey Maiorov
03:22 AM Bug report #13779: symbols not correctly clipped in map legend: This regression affects also the latest 2.18 release. Giovanni Manghi
03:22 AM Bug report #13779: symbols not correctly clipped in map legend: This regression affects also the latest 2.18 release. Giovanni Manghi
03:21 AM Bug report #16272 (Closed): Some times it is impossible to use move or rotate label tool: Some times it is impossible to use move or rotate label tool.
Try to create 2 different layers one of them is a edit... Andrey Maiorov
03:04 AM Bug report #16271 (Closed): Composer item change his position without control: Create an atlas in composer with various page sizes. The page size is tie to the size of the object in the coverage l... Andrey Maiorov
02:45 AM Bug report #16270 (Closed): Modeler does not work on QGIS master: TypeError: arguments did not match any overloaded call: QSize(): too many arguments QSize(int, int): argument 1 h... Giovanni Manghi
02:45 AM Bug report #16097 (Closed): Convert formats within a processing model: Saber Razmjooei
02:44 AM Bug report #16097 (Feedback): Convert formats within a processing model: Works for me on 2.18.4. (on Master the modeler does not work, so I believe that you hit this issue on 2.14/2.18 and n... Giovanni Manghi
02:29 AM Bug report #16224 (Feedback): Selected language is not taken into consideration: This affects only master, correct? Giovanni Manghi
02:29 AM Bug report #16224 (Feedback): Selected language is not taken into consideration: This affects only master, correct? Giovanni Manghi
02:28 AM Bug report #16239: master: (much) slower rendering (and attribute table opening) time compared to...: see also #15752 Giovanni Manghi
02:27 AM Bug report #8760 (Feedback): Custom Form from .ui File crashes QGIS on Ubuntu: Is this still an issue on 2.18.4? Giovanni Manghi
02:16 AM Feature request #16264 (Closed): Processing "Import into PostGIS" doesn´t reflect current PostGIS...: duplicate of #13041 Giovanni Manghi
02:16 AM Feature request #16264 (Closed): Processing "Import into PostGIS" doesn´t reflect current PostGIS...: duplicate of #13041 Giovanni Manghi
02:12 AM Bug report #16267: Printing Pdf's that have WMTS layers problems: I can see it also here. 2.18.4 too on Linux. Giovanni Manghi
02:05 AM Bug report #16137 (Feedback): QGis Print composer prints maps with strange red lines: Tudor Bărăscu wrote:
> Hello! In order to get your bug "noticed" and easier to replicate, I would suggest adding test... Giovanni Manghi
02:05 AM Bug report #16137 (Feedback): QGis Print composer prints maps with strange red lines: Tudor Bărăscu wrote:
> Hello! In order to get your bug "noticed" and easier to replicate, I would suggest adding test... Giovanni Manghi
01:44 AM Bug report #16269 (Closed): relation reference widget with attachment widget progressive size inc...: When having an attachment widget as a picture in an embded form in a relation reference widget, the image size increa... Denis Rouzaud
01:04 AM Bug report #16268 (Feedback): Issue connecting QgsVectorLayer.committedAttributesAdded under QGIS...: I am migrating a plugin to QGIS3 and under Windows with the latest qgis-dev release(build 1182816)
I get an error co... enrico ferreguti

2017-03-02

12:42 AM Bug report #16071: SIP 4.19 breaks QGIS build: To definitively fix the things, the same patch should be applied on 2.14 branch so it will not be lost next release.
... Bruno Friedmann
11:34 PM Bug report #7146: DB manager does not remove Spatialite indexes and entry in "spatialite_hystory"...: Here on Win7 creating a new table with a previously used table name works, but the features are not displayed properl... R. R.
10:21 PM Bug report #16267 (Closed): Printing Pdf's that have WMTS layers problems: Hello,
In 2.18.4, 2.14.12 projects that have a WMTS layers I've noticed the resulted pdf image is randomly missing... Tudor Bărăscu
09:58 PM Bug report #16137: QGis Print composer prints maps with strange red lines: Hello! In order to get your bug "noticed" and easier to replicate, I would suggest adding test data, information rega... Tudor Bărăscu
03:07 PM Feature request #16251: Use bind variables in Oracle SQL: Jurgen,
I have scanned the changeset and what you have done looks good.
Thanks for the fast response.
regards
Simon Simon Greener
03:01 PM Feature request #16251 (Closed): Use bind variables in Oracle SQL: Fixed in changeset commit:"fb409b59a9ab2e748372cf1b0e346cc24144ee7f". Jürgen Fischer
01:19 PM Bug report #16266 (Closed): OWSLib failed because pyproj is missing: I use the OWSLib version integrated within QGIS in my plugin, to handle main OGC services (WMS/WMTS and WFS).
It's so... geo julien
01:18 PM Feature request #16265 (Closed): Saving a processing model confirmation dialog: When I save a processing model QGIS opens a window saying that the model was saved correctly. Is this really necessar... Magnus Nilsson
01:10 PM Feature request #16264 (Closed): Processing "Import into PostGIS" doesn´t reflect current PostGIS...: I noticed that the processing tool "Import into PostGIS" doesn´t show recently added PostGIS connections. Restarting ... Magnus Nilsson
12:58 PM Feature request #16263 (Closed): Select multiple objects in Processing: The processing modeller should support selecting multiple objects. That would help rearranging the model easier. Magnus Nilsson
12:49 PM Feature request #16262 (Closed): Support for undo/redo in Processing: I would like to see support for undo/redo when moving/rearranging objects when building a model in processing. Magnus Nilsson
11:43 AM Bug report #16261 (Closed): metasearch fails when catalogue entry provides full GetCapabilities U...: As a metasearch user
I want to access entries in catalogues that include a full GetCapabilities URL
So that these typ... Dave Sampson
10:40 AM Feature request #16260 (Closed): Better colour scheme for node tool: People find the current colour scheme for node tool during digitizing (red for normal nodes, blue for selected, green... Paolo Cavallini
09:15 AM Bug report #16259: Processing Refactor Fields tool: some field types appear twice in the list: It affects also 2.18 and 2.14, so it seems never worked 100% ok. Giovanni Manghi
08:34 AM Bug report #16259 (Closed): Processing Refactor Fields tool: some field types appear twice in the...: In the Processing tool Refactor Fields, using a shapefile, I get twice "Double" and "Date" values in the Type column ... Harrissou Santanna
06:58 AM Bug report #16046 (Feedback): QGIS 2.14/2.18 crashes loading project with MSSQL layers: Giovanni Manghi
05:18 AM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: Johanna Botman wrote:
> I would like to upgrade to 2.18.4
Have you tried with the data I attached?
I did the sam... Andre Jesus
06:00 AM Bug report #16254: clipping a CORINE landcover geotiff raster with a polygon misses a driver: I managed to clip the raster on a different computer, and with QGIS 2.14 on it. :)
On the affected machine I:
- rein... Davor Lister
04:36 AM Bug report #16227 (Closed): R scripts won't run: Fixed in changeset commit:"b500ab506595e2efa12fce7f67cbbfd620403322". Victor Olaya
02:15 AM Bug report #15976: Attribute table: rows are switching when adding attributes: Confirmed also on 2.18.4 Giovanni Manghi
02:15 AM Bug report #15976: Attribute table: rows are switching when adding attributes: Confirmed also on 2.18.4 Giovanni Manghi

2017-03-01

11:07 PM Bug report #16233 (Closed): regression: deleting a saved wms/wmts server crashes QGIS: Fixed in changeset commit:"e045b369cf6cb5700be8cc783f32f8af06c93485". Anonymous
05:49 PM Bug report #11135 (Closed): Zonal Statistics is calculating wrong mean values: Sounds like a different issue - processing doesn't reuse this library (until 3.0, when it does). You'll need to open ... Nyall Dawson
03:02 PM Bug report #11135 (Reopened): Zonal Statistics is calculating wrong mean values: I'm seeing a regression in this on 2.18.3 in Linux. There are no Zonal Statistics in the Raster menu, but the Process... Spencer Gardner
03:22 PM Bug report #16046: QGIS 2.14/2.18 crashes loading project with MSSQL layers: I am using QGIS 2.14.4 and MSSQL 2014 and do not have any issues. I would like to upgrade to 2.18.4 and would like t... Johanna Botman
08:28 AM Bug report #16232: Update SRS DB with latest data from GDAL: Is this an additional installation step when building from source? If so, it should be documented. Isn't it odd to ex... Spencer Gardner
01:30 AM Bug report #16232 (Closed): Update SRS DB with latest data from GDAL: @crssync@ should be run on install to sync the srs.db with the installed GDAL. Jürgen Fischer
01:30 AM Bug report #16232 (Closed): Update SRS DB with latest data from GDAL: @crssync@ should be run on install to sync the srs.db with the installed GDAL. Jürgen Fischer
07:51 AM Bug report #16258 (Closed): MapTips dont work on OSX: Steps to reproduce:
1. Open a vector layer
2. Go to Map->Properties->Display and set a map tip
3. Hover over the map
... Georg Wicke
07:37 AM Bug report #16071 (Closed): SIP 4.19 breaks QGIS build: Looks like the latest commit:85a0db24f32351f6096cd8282f03ad5c2f4e6ef5 allows compiling with sip 4.19.1 - many thanks! Donovan Cameron
07:37 AM Bug report #16071 (Closed): SIP 4.19 breaks QGIS build: Looks like the latest commit:85a0db24f32351f6096cd8282f03ad5c2f4e6ef5 allows compiling with sip 4.19.1 - many thanks! Donovan Cameron
05:47 AM Bug report #16248: Processing / Import layer in PostGIS: Thanks for this fast answer.
I made some more test on other systems:
Other Mac 10.12 -> not ok (doesn't work) / QG... didier peeters
03:34 AM Bug report #16248 (Feedback): Processing / Import layer in PostGIS: Can't confirm here (also 10.12), see attached images Giovanni Manghi
03:34 AM Bug report #16248 (Feedback): Processing / Import layer in PostGIS: Can't confirm here (also 10.12), see attached images Giovanni Manghi
03:34 AM Bug report #16248 (Feedback): Processing / Import layer in PostGIS: Can't confirm here (also 10.12), see attached images Giovanni Manghi
03:34 AM Bug report #16248 (Feedback): Processing / Import layer in PostGIS: Can't confirm here (also 10.12), see attached images Giovanni Manghi
03:34 AM Bug report #16248 (Feedback): Processing / Import layer in PostGIS: Can't confirm here (also 10.12), see attached images Giovanni Manghi
05:10 AM Bug report #14621 (Closed): linestring being created as linestringZ (MSSQL): Andre Jesus wrote:
> Giovanni Manghi wrote:
> > I have a report from a MS SQL Server 2014 user that this issue in not... Giovanni Manghi
05:10 AM Bug report #14621 (Closed): linestring being created as linestringZ (MSSQL): Andre Jesus wrote:
> Giovanni Manghi wrote:
> > I have a report from a MS SQL Server 2014 user that this issue in not... Giovanni Manghi
03:32 AM Bug report #14621: linestring being created as linestringZ (MSSQL): Giovanni Manghi wrote:
> I have a report from a MS SQL Server 2014 user that this issue in not confirmed, can anyone ... Andre Jesus
03:11 AM Bug report #14621: linestring being created as linestringZ (MSSQL): I have a report from a MS SQL Server 2014 user that this issue in not confirmed, can anyone else give it a try? Giovanni Manghi
05:06 AM Bug report #15931: Default value is not saved: Anonymous wrote:
> Fixed in changeset commit:"72cffa68b9fd996620d076e1df5fbbdad92e4ecd".
Working perfectly, thank you! Andre Jesus
04:36 AM Bug report #16253: Issues with Postgis table having timestamp as primary key: Is this OK? I didn't edit schema and owner. Kai Borgolte
03:15 AM Bug report #16253 (Feedback): Issues with Postgis table having timestamp as primary key: Can you attach sample data (preferably a dump of the table, or part of it)? Giovanni Manghi
04:12 AM Bug report #15795: Color Select in MacOS: Rhenriques Henriques wrote:
> This behavior happens when the layer is categorized by any field. Double click any cate... Giovanni Manghi
04:12 AM Bug report #15795: Color Select in MacOS: Rhenriques Henriques wrote:
> This behavior happens when the layer is categorized by any field. Double click any cate... Giovanni Manghi
04:06 AM Bug report #16257 (Closed): slow rendering in QGIS 2.14 while zooming: Hi there!
I have a problem with migration my project to LTR version (2.14) of QGIS (from project created in QGIS 2.8 ... Seb Radzimski
03:44 AM Bug report #16256 (Open): Diagrams don't render if all values are negative: Left click on layer -> Properties -> Diagrams -> Attributes. If all columns on the 'Attribute' list are negative it f... Daniel Moreira
03:29 AM Feature request #16255 (Closed): way to avoid loss of non-core svg folders during upgrade: We use only LTR (currently 2.14), working in UK. We keep an Ordnance Survey folder of svg files for MasterMap (folder... Steve Lowman
02:47 AM Feature request #12776: Attribute table undo button: Create a Undo Button in the menu of the attribute table:
Problem:
When you fill a column with a lot of value or a si... João Gaspar
01:46 AM Bug report #16254: clipping a CORINE landcover geotiff raster with a polygon misses a driver: The source of landcover tiff file is here: http://land.copernicus.eu/pan-european/corine-land-cover Davor Lister
01:45 AM Bug report #16254 (Closed): clipping a CORINE landcover geotiff raster with a polygon misses a dr...: It says: "Output driver 'DTED' not recognised or does not support direct output file creation."
Upon inspection the R... Davor Lister

2017-02-28

12:56 AM Bug report #11199 (Closed): On-the-fly reprojection fails to automatically activate when a multi-...: Disabling on the fly projection is no longer an option in QGIS 3.0 Nyall Dawson
12:56 AM Bug report #11199 (Closed): On-the-fly reprojection fails to automatically activate when a multi-...: Disabling on the fly projection is no longer an option in QGIS 3.0 Nyall Dawson
12:55 AM Feature request #11644 (Closed): Do not enable automatic on-the-fly projection by default: Disabling on the fly projection is no longer an option in QGIS 3.0
Nyall Dawson
12:55 AM Feature request #11644 (Closed): Do not enable automatic on-the-fly projection by default: Disabling on the fly projection is no longer an option in QGIS 3.0
Nyall Dawson
12:54 AM Bug report #11851 (Closed): On-the-fly projection shift for EPSG:3375 on QGIS 2.6.1 Brighton for ...: The openlayers plugin has numerous issues like this. It's not a problem in QGIS itself, it's an issue with the plugin. Nyall Dawson
12:54 AM Bug report #11851 (Closed): On-the-fly projection shift for EPSG:3375 on QGIS 2.6.1 Brighton for ...: The openlayers plugin has numerous issues like this. It's not a problem in QGIS itself, it's an issue with the plugin. Nyall Dawson
12:53 AM Feature request #12098 (Closed): "On the fly reprojection" warning: Disabling on the fly projection is no longer an option in QGIS 3.0 Nyall Dawson
12:53 AM Feature request #12098 (Closed): "On the fly reprojection" warning: Disabling on the fly projection is no longer an option in QGIS 3.0 Nyall Dawson
12:17 AM Bug report #16253 (Open): Issues with Postgis table having timestamp as primary key: I tried to use a QGIS point layer from a PostgreSQL 9.6 table, which contains a modified GPS track. The table uses fi... Kai Borgolte
06:38 PM Feature request #16252 (Open): SDO_DIMNAME values QGIS Oracle Data Provider: When QGIS (2.18.3) queries Oracle to discover metadata properties, it executes the following to discover the spatial ... Simon Greener
06:34 PM Feature request #16244: Project file recovery: I should also add that the project file name when opened after a crash should change to have "Recovered" added to it. James Harvey
06:25 PM Feature request #16251 (Closed): Use bind variables in Oracle SQL: The use of bind variables in SQL is considered best practice (see Tom Kyte's articles).
Currently the QGIS Oracle Da... Simon Greener
02:35 PM Bug report #10887 (Feedback): Qgis return empty QgsComposition from standalone application: What is the status of this issue on the most recent QGIS releases? Giovanni Manghi
02:28 PM Bug report #15891: Crash when the first SVG path is empty: 2.18.4 also affected. Giovanni Manghi
02:28 PM Bug report #15891: Crash when the first SVG path is empty: 2.18.4 also affected. Giovanni Manghi
02:28 PM Bug report #15891: Crash when the first SVG path is empty: 2.18.4 also affected. Giovanni Manghi
02:25 PM Bug report #15741: PostGIS issue when using 'Merge selected features' tool (Geometry type does ...: 2.18.4 also affected. Giovanni Manghi
02:25 PM Bug report #15741: PostGIS issue when using 'Merge selected features' tool (Geometry type does ...: 2.18.4 also affected. Giovanni Manghi
02:25 PM Bug report #16154: Feature disappearing when saving edits: > Will do so and be back with the results on the weekend! Thanks
by the way, I also cannot confirm yours #16236 too Giovanni Manghi
02:15 PM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> > The windows 10 installation is just one month old, but I can certainly redo it!
>
> I app... Ger CO
02:12 PM Bug report #16154: Feature disappearing when saving edits: > The windows 10 installation is just one month old, but I can certainly redo it!
I appreciate it. Very curious to... Giovanni Manghi
02:01 PM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> > That is sad, since I am currently on three individual machines: two with win7 64, one with... Ger CO
01:54 PM Bug report #16154: Feature disappearing when saving edits: > That is sad, since I am currently on three individual machines: two with win7 64, one with win 10 64. It´s the sam... Giovanni Manghi
01:48 PM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> > Maybe, it is an encoding problem.... As a German citizen I usually work in UTF-8, latin1, ... Ger CO
01:42 PM Bug report #16154: Feature disappearing when saving edits: > Maybe, it is an encoding problem.... As a German citizen I usually work in UTF-8, latin1, and iso 8859-1 for shape... Giovanni Manghi
01:25 PM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> > I will share a dataset and screen recording. I can confirm this behavior when all external... Ger CO
01:09 PM Bug report #16154: Feature disappearing when saving edits: > I will share a dataset and screen recording. I can confirm this behavior when all external plugins are disabled. I... Giovanni Manghi
12:54 PM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> > Again: this affects all shapefiles (at least on windows).
>
> Can you attach a sample of... Ger CO
12:40 PM Bug report #16154: Feature disappearing when saving edits: > Again: this affects all shapefiles (at least on windows).
Can you attach a sample of data? I ask because seems o... Giovanni Manghi
11:40 AM Bug report #16154: Feature disappearing when saving edits: Giovanni Manghi wrote:
> Ger CO wrote:
> > I am having the same issue+ double features when saving edits. extremely s... Ger CO
11:18 AM Bug report #16154 (Closed): Feature disappearing when saving edits: Ger CO wrote:
> I am having the same issue+ double features when saving edits. extremely scary and and very severe is... Giovanni Manghi
04:53 AM Bug report #16154 (Reopened): Feature disappearing when saving edits: I am having the same issue+ double features when saving edits. extremely scary and and very severe issue Ger CO
03:39 AM Bug report #16154 (Closed): Feature disappearing when saving edits: remove the .sbn and .sbx spatial indexes created by esri and there will be no issue (well... maybe a new issue should... Giovanni Manghi
03:39 AM Bug report #16154 (Closed): Feature disappearing when saving edits: remove the .sbn and .sbx spatial indexes created by esri and there will be no issue (well... maybe a new issue should... Giovanni Manghi
02:23 PM Bug report #15961: Escaping out of Dialog causes QGIS to crash: Still true on 2.18.4 Giovanni Manghi
02:20 PM Bug report #15945 (Feedback): Styling dock: label tab does not get refreshed when changing layer ...: Denis Rouzaud wrote:
> - Use a vector layer
> - Enable labeling and define it
> - Create a second style "huge style"
... Giovanni Manghi
02:09 PM Bug report #14822 (Feedback): QGIS Server 2.14.2: segmentation fault in GetProjectSettings: Is this issue still affecting the latest point releases of 2.14 and 2.18? Giovanni Manghi
02:07 PM Bug report #15482 (Feedback): Qgis Desktop cannot open layers from Qgis Server if the short_name ...: > I just found a workaround: delete the .qgis2/cache directory.
> However, we shouldn't be in this case.
Hi Tudor a... Giovanni Manghi
02:03 PM Bug report #15969 (Feedback): categorized labeled layers with virtual fields crash qgis: I cannot replicate with the attached project and data on Windows and 2.18.4
can you test if in this version is fixed? Giovanni Manghi
02:03 PM Bug report #15969 (Feedback): categorized labeled layers with virtual fields crash qgis: I cannot replicate with the attached project and data on Windows and 2.18.4
can you test if in this version is fixed? Giovanni Manghi
01:46 PM Bug report #15819: DB Manager SQL Window Not Launching: I really cannot replicate (on the same Linux platforms) this issue, anyway the new LTR is due very soon, and 2.14.* i... Giovanni Manghi
01:34 PM Bug report #16250: Processing ogr tools problems in QGIS 2.18.10 when special chars are in input ...: Other algs are possibly affected. Giovanni Manghi
01:34 PM Bug report #16250 (Closed): Processing ogr tools problems in QGIS 2.18.10 when special chars are ...: Example with the dissolve alg:
Output command when input is in a path with no special chars:
Algorithm Dissolve... Giovanni Manghi
01:16 PM Bug report #14704: Encoding problems with Processing toolbox: Saber Razmjooei wrote:
> In my case, the problem was with path.
>
> The bug is present in 2.18 and 2.14.
Tested on ... Giovanni Manghi
01:16 PM Bug report #14704: Encoding problems with Processing toolbox: Saber Razmjooei wrote:
> In my case, the problem was with path.
>
> The bug is present in 2.18 and 2.14.
Tested on ... Giovanni Manghi
01:16 PM Bug report #14704: Encoding problems with Processing toolbox: Saber Razmjooei wrote:
> In my case, the problem was with path.
>
> The bug is present in 2.18 and 2.14.
Tested on ... Giovanni Manghi
01:16 PM Bug report #14704: Encoding problems with Processing toolbox: Saber Razmjooei wrote:
> In my case, the problem was with path.
>
> The bug is present in 2.18 and 2.14.
Tested on ... Giovanni Manghi
01:02 PM Bug report #16249 (Closed): QGIS "voronoi polygons tool" do not work with PostGIS layers: float division by zero See log for more details
with the same layer saved as shapefile there are no issues. Giovanni Manghi
12:37 PM Bug report #15775: Zoom to selection zooms more than needed: > Zoom level is too high here as well. I am on win 7 64, qgis 2.18.4
please post an image. Thanks. Giovanni Manghi
11:47 AM Bug report #15775: Zoom to selection zooms more than needed: Giovanni Manghi wrote:
> > - it fails to render all the geometry on 2.18.3-dev (commit:f1379e8) or 2.18.4, regardles... Ger CO
11:21 AM Bug report #15775: Zoom to selection zooms more than needed: > - it fails to render all the geometry on 2.18.3-dev (commit:f1379e8) or 2.18.4, regardless the data format (PG vs... Giovanni Manghi
07:03 AM Bug report #15775: Zoom to selection zooms more than needed: I give it a try again (using the same data) and:
* on macOS with 2.18.2 it works as expected
* on Windows 10
- it wo... Harrissou Santanna
05:34 AM Bug report #15775 (Feedback): Zoom to selection zooms more than needed: I cannot really replicate with 2.18.4 on both Windows and Linux.
Can you add more details (datasource, type of geomet... Giovanni Manghi
11:30 AM Bug report #16074 (Closed): Files CSV do not generate point: The X/Y values have a space in the middle of numbers that must be striped.
Once you do that the point text layer impo... Giovanni Manghi
11:30 AM Bug report #16074 (Closed): Files CSV do not generate point: The X/Y values have a space in the middle of numbers that must be striped.
Once you do that the point text layer impo... Giovanni Manghi
11:30 AM Bug report #16074 (Closed): Files CSV do not generate point: The X/Y values have a space in the middle of numbers that must be striped.
Once you do that the point text layer impo... Giovanni Manghi
11:00 AM Bug report #15498: SQLite/GPKG database locked during canvas refresh: Seen also on 2.18.4, geopackage seems not affected. Giovanni Manghi
11:00 AM Bug report #15498: SQLite/GPKG database locked during canvas refresh: Seen also on 2.18.4, geopackage seems not affected. Giovanni Manghi
10:47 AM Bug report #15224 (Closed): Inability to Make More than One Join to Same Table: Nyall Dawson wrote:
> Looks like it was a deliberate decision - see commit:95ebf45
>
> Denis may be able to elaborat... Giovanni Manghi
10:47 AM Bug report #15224 (Closed): Inability to Make More than One Join to Same Table: Nyall Dawson wrote:
> Looks like it was a deliberate decision - see commit:95ebf45
>
> Denis may be able to elaborat... Giovanni Manghi
10:35 AM Bug report #14621 (Feedback): linestring being created as linestringZ (MSSQL): Andre Jesus wrote:
> Problem persists: 2.16.1
I believe the problem persist also in 2.18.4, correct? Giovanni Manghi
10:35 AM Bug report #14621 (Feedback): linestring being created as linestringZ (MSSQL): Andre Jesus wrote:
> Problem persists: 2.16.1
I believe the problem persist also in 2.18.4, correct? Giovanni Manghi
10:35 AM Bug report #14621 (Feedback): linestring being created as linestringZ (MSSQL): Andre Jesus wrote:
> Problem persists: 2.16.1
I believe the problem persist also in 2.18.4, correct? Giovanni Manghi
10:33 AM Bug report #15316: symbology offset based on expressions does not work anymore: Also affects 2.18.4 Giovanni Manghi
10:33 AM Bug report #15316: symbology offset based on expressions does not work anymore: Also affects 2.18.4 Giovanni Manghi
07:59 AM Bug report #16248 (Closed): Processing / Import layer in PostGIS: None of the tools made to import layers in PostGIS( available in the Processing tools) can select a layer.
The drop... didier peeters
05:58 AM Bug report #16247 (Closed): mssql data provider: filtering layer doesn't work: Hallo,
MSSQL Layers cannot be filtered at least in QGIS version 2.14. To reproduce: I added a point table (geometry ... Thomas Schneider
05:32 AM Bug report #15899: Crash with segmentation fault in 2.18 - may relate to large PostGIS layers: Please also try the latest version available 2.18.4 Giovanni Manghi
05:31 AM Bug report #15899 (Feedback): Crash with segmentation fault in 2.18 - may relate to large PostGIS...: Not really sure what to do with this ticket. Replicating the issue locally does not seems possible: I have loaded ~10... Giovanni Manghi
05:31 AM Bug report #15899 (Feedback): Crash with segmentation fault in 2.18 - may relate to large PostGIS...: Not really sure what to do with this ticket. Replicating the issue locally does not seems possible: I have loaded ~10... Giovanni Manghi
05:31 AM Bug report #15899 (Feedback): Crash with segmentation fault in 2.18 - may relate to large PostGIS...: Not really sure what to do with this ticket. Replicating the issue locally does not seems possible: I have loaded ~10... Giovanni Manghi
05:31 AM Bug report #15899 (Feedback): Crash with segmentation fault in 2.18 - may relate to large PostGIS...: Not really sure what to do with this ticket. Replicating the issue locally does not seems possible: I have loaded ~10... Giovanni Manghi
05:05 AM Bug report #16136 (Feedback): Field Properties; Edit widget settings are not stored: I cannot confirm the problem or am I trying the wrong way.
Please test 2.18.4 and/or add the specific steps to repli... Giovanni Manghi
05:05 AM Bug report #16136 (Feedback): Field Properties; Edit widget settings are not stored: I cannot confirm the problem or am I trying the wrong way.
Please test 2.18.4 and/or add the specific steps to repli... Giovanni Manghi
05:05 AM Bug report #16136 (Feedback): Field Properties; Edit widget settings are not stored: I cannot confirm the problem or am I trying the wrong way.
Please test 2.18.4 and/or add the specific steps to repli... Giovanni Manghi
04:44 AM Bug report #16246 (Closed): MapTips do not support Unicode names: Steps to reproduce:
1. Load a vector layer that uses unicode characters in one of their fields (e. g. "Würselen")
2.... Georg Wicke
04:37 AM Bug report #10900: python filter expression don't work on "value relation": Unless I'm doing something wrong it seems to me that 2.18.4 is still affected. Giovanni Manghi
04:37 AM Bug report #10900: python filter expression don't work on "value relation": Unless I'm doing something wrong it seems to me that 2.18.4 is still affected. Giovanni Manghi
04:37 AM Bug report #10900: python filter expression don't work on "value relation": Unless I'm doing something wrong it seems to me that 2.18.4 is still affected. Giovanni Manghi
04:24 AM Bug report #15803: 2.18: Move Selection to Top not working in attribute table: see also #15370 Giovanni Manghi
04:24 AM Bug report #15370 (Closed): "move selection to top" does not work: duplicate of #15803 Giovanni Manghi
04:24 AM Bug report #15370 (Closed): "move selection to top" does not work: duplicate of #15803 Giovanni Manghi
04:22 AM Bug report #15369 (Closed): layer rendering very slow and QGIS crashes with large number of rule ...: Chris Freyberg wrote:
> Updates made by other people to this ticket appear to suggest that the reported issue was *sl... Giovanni Manghi
04:22 AM Bug report #15369 (Closed): layer rendering very slow and QGIS crashes with large number of rule ...: Chris Freyberg wrote:
> Updates made by other people to this ticket appear to suggest that the reported issue was *sl... Giovanni Manghi
03:57 AM Bug report #14448 (Feedback): Offset curve tools duplicate lines: Regis Haubourg wrote:
> Yes confirmed here. When looking at the logs on postgis side, the offset tool sends the wrong... Giovanni Manghi
03:57 AM Bug report #14448 (Feedback): Offset curve tools duplicate lines: Regis Haubourg wrote:
> Yes confirmed here. When looking at the logs on postgis side, the offset tool sends the wrong... Giovanni Manghi
02:24 AM Feature request #16245 (Open): DB Manager: Dock the window: It would be useful to be able dock DB Manager's window below Processing's or Layer's Panel. Particularly when the use... Filipe Dias

2017-02-27

12:31 AM Bug report #16074: Files CSV do not generate point: Hi, with sample data in EPSG:2154. I try with the last version of LTR and testing, I have the same problem. dany Lefeuvre
02:02 PM Bug report #16074 (Feedback): Files CSV do not generate point: Please attach sample data. Giovanni Manghi
02:02 PM Bug report #16074 (Feedback): Files CSV do not generate point: Please attach sample data. Giovanni Manghi
02:02 PM Bug report #16074 (Feedback): Files CSV do not generate point: Please attach sample data. Giovanni Manghi
12:00 AM Bug report #16171 (Closed): QGIS gets very laggy when using local GeoPackages: Jérôme Guélat wrote:
> This bug is really intriguing... I wasn't able to reproduce it on other computers and therefor... Giovanni Manghi
12:00 AM Bug report #16171 (Closed): QGIS gets very laggy when using local GeoPackages: Jérôme Guélat wrote:
> This bug is really intriguing... I wasn't able to reproduce it on other computers and therefor... Giovanni Manghi
11:23 PM Bug report #16242: QGIS 2.18.4 saves always with absolute paths: Richard Duivenvoorde wrote:
> Hi, I just created a fresh project with current 2.18.4 yesterday, and sent it to a clie... Giovanni Manghi
11:20 PM Bug report #16242: QGIS 2.18.4 saves always with absolute paths: Hi, I just created a fresh project with current 2.18.4 yesterday, and sent it to a client with the shape files next t... Richard Duivenvoorde
01:31 PM Bug report #16242 (Closed): QGIS 2.18.4 saves always with absolute paths: Regardless of what chosen in project properties.
Master seems ok. Giovanni Manghi
03:35 PM Bug report #15974: Rows of the attribute table seem to be duplicated when saving edits in a shape...: 2.18.4 also affected. Giovanni Manghi
03:35 PM Bug report #15974: Rows of the attribute table seem to be duplicated when saving edits in a shape...: 2.18.4 also affected. Giovanni Manghi
03:14 PM Bug report #15936 (Closed): Drag and drop import/export broken in DB manager: works as expected on 2.18.4. Giovanni Manghi
03:14 PM Bug report #15936 (Closed): Drag and drop import/export broken in DB manager: works as expected on 2.18.4. Giovanni Manghi
03:04 PM Bug report #11884 (Closed): Processing generates outputs with no "+towgs84" parameters: duplicate of #10137 Giovanni Manghi
03:04 PM Bug report #11884 (Closed): Processing generates outputs with no "+towgs84" parameters: duplicate of #10137 Giovanni Manghi
03:04 PM Bug report #10137: Processing stripping out +towgs params: see also #11884 Giovanni Manghi
02:53 PM Bug report #16037 (Closed): QGIS crashes with PostGIS connection: Closing for lack of feedback. Giovanni Manghi
02:53 PM Bug report #16037 (Closed): QGIS crashes with PostGIS connection: Closing for lack of feedback. Giovanni Manghi
02:52 PM Bug report #14172 (Closed): QGIS freezes after canvas refresh when using graduated style with man...: Closing for lack of feedback. Giovanni Manghi
02:52 PM Bug report #14172 (Closed): QGIS freezes after canvas refresh when using graduated style with man...: Closing for lack of feedback. Giovanni Manghi
02:48 PM Bug report #9080 (Closed): GdalTools (QGIS 2.0.1) fail if file path includes non-ascii characters: Closing for lack of feedback. Giovanni Manghi
02:48 PM Bug report #9080 (Closed): GdalTools (QGIS 2.0.1) fail if file path includes non-ascii characters: Closing for lack of feedback. Giovanni Manghi
02:47 PM Bug report #16020 (Closed): Error saving new table records in specific field (2.99 110ffe2): > My testing so far seems to indicate the newest version of master has resolved the problem.
closing then. Giovanni Manghi
02:47 PM Bug report #16020 (Closed): Error saving new table records in specific field (2.99 110ffe2): > My testing so far seems to indicate the newest version of master has resolved the problem.
closing then. Giovanni Manghi
02:46 PM Bug report #16058 (Closed): Crash when adding WMS layer from MapBox: Closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
02:46 PM Bug report #16058 (Closed): Crash when adding WMS layer from MapBox: Closing for lack of feedback. Please reopen if necessary. Giovanni Manghi
02:44 PM Bug report #16159 (Closed): SAGA GIS Raster calculator bug: Closing for lack of feedback. Giovanni Manghi
02:44 PM Bug report #16159 (Closed): SAGA GIS Raster calculator bug: Closing for lack of feedback. Giovanni Manghi
02:00 PM Feature request #16244 (Open): Project file recovery: Is there a way that a recovered project view could show after a application crash? It would behave in a similar way a... James Harvey
01:53 PM Bug report #16243 (Closed): Crash while using Geo-reference Layer: I had a Geo-reference raster layer cause a crash while trying to pan the view (hand pan view icon) around on my scree... James Harvey
12:21 PM Bug report #16233: regression: deleting a saved wms/wmts server crashes QGIS: The fix is trivial but I'm on vacation and away from my dev PC, I'll fix it later this week.
See https://github.com/... Alessandro Pasotti
11:37 AM Bug report #16239: master: (much) slower rendering (and attribute table opening) time compared to...: Nyall Dawson wrote:
> Can you shoot me a link to the data/project? [email protected]
sent using DropBox. Cheers! Giovanni Manghi
10:37 AM Bug report #16239: master: (much) slower rendering (and attribute table opening) time compared to...: Can you shoot me a link to the data/project? [email protected] Nyall Dawson
05:10 AM Bug report #16239 (Closed): master: (much) slower rendering (and attribute table opening) time co...: On the same machine, with the same settings, the rendering time of QGIS master seems much slower if compared to (for ... Giovanni Manghi
08:11 AM Bug report #16241 (Closed): Missing labels in form from joined table: Here's the problem:
I made a form with the Drag&Drop tool, with 3 tabs among which one has only fields from a table ... didier peeters
06:11 AM Bug report #16240: Node tool does not add z value to 3d vectors, while the nodes added by the ras...: Hi Martin, added you as watcher because maybe this can be tackled while https://github.com/qgis/QGIS/pull/4187 ? Giovanni Manghi
06:09 AM Bug report #16240 (Closed): Node tool does not add z value to 3d vectors, while the nodes added b...: Subject says it all. The z values set by new nodes added with the node tool is 0. Giovanni Manghi
04:57 AM Bug report #16236 (Feedback): Shapefile Column Position cannot be changed: Just tested on QGIS 2.18.4 on the same platform, no problems.
Can you attach a sample dataset? Giovanni Manghi
03:09 AM Feature request #16237: Filter Layers by spatial relationships to other layers within a qgis ses...: You can do this using virtual layers #14905-6 R. R.
01:34 AM Feature request #16237 (Open): Filter Layers by spatial relationships to other layers within a q...: It would be great to have the functionality to filter layers based on their spatial relationships to other layers wit... Ger CO
02:01 AM Bug report #16238: Loading a plugin that adds to the processing plugin does not work correctly: I forgot to mention that the plugin initially loads ok. This bug happens only when one unloads + loads the plugin, wh... Ari Jolma
01:58 AM Bug report #16238 (Closed): Loading a plugin that adds to the processing plugin does not work cor...: Loading a plugin that adds to the processing plugin leads to a keyerror:... Ari Jolma

2017-02-26

12:45 AM Bug report #16236 (Closed): Shapefile Column Position cannot be changed: When right-clicking on a column in attribute table and choosing rearrange colmuns functionality the rearrangement of ... Ger CO
12:16 AM Feature request #14905: 'Processing Toolbox' - Add 'Save to virtual layer' option: Select by spatial relationship: R. R.
12:16 AM Feature request #14905: 'Processing Toolbox' - Add 'Save to virtual layer' option: Select by spatial relationship: R. R.
12:16 AM Feature request #14905: 'Processing Toolbox' - Add 'Save to virtual layer' option: Select by spatial relationship: R. R.
12:16 AM Feature request #14905: 'Processing Toolbox' - Add 'Save to virtual layer' option: Select by spatial relationship: R. R.
02:25 PM Bug report #13780 (Closed): incosistencies in results of topology checker, geometry checker and ...: Randal Hale
02:24 PM Bug report #15083 (Closed): Import Data into Geopackage using DBManager: Randal Hale
02:15 PM Bug report #16235 (Closed): Create Points along Lines in Processing: If you have a line feature and use the "Create Points Along Lines" and leave the default output to be [Create Tempora... Randal Hale
02:39 AM Bug report #16071: SIP 4.19 breaks QGIS build: Ok this is also seen in openSUSE build qgis 2.18.3 and sip 4.19.1
@[ 658s] [ 87%] Building CXX object python/CMakeF... Bruno Friedmann

2017-02-25

09:05 PM Bug report #16234 (Closed): regression: QGIS does not respect icon size upon launch: QGIS master doesn't respect the user's selected icon size upon launch. Regression occurred following the merging of t... Mathieu Pellerin - nIRV
07:58 PM Bug report #16233 (Closed): regression: deleting a saved wms/wmts server crashes QGIS: I'm pretty sure this is a regression from the QgsSettings PR (#e1ede700a897c899be8aabf20abe7f953209cb10). When the us... Mathieu Pellerin - nIRV
07:40 PM Bug report #15854 (Closed): wmts servers shouldn't re-try 4xx http responses: Fixed in changeset commit:"171dfe113034767d9941d7041afce6c5e4ecb027". Martin Dobias
06:20 PM Bug report #16232 (Closed): Update SRS DB with latest data from GDAL: My Linux builds of QGIS 2.18 are missing a number of map projections that appear in GDAL. As best I can tell, this is... Spencer Gardner
09:03 AM Bug report #16071: SIP 4.19 breaks QGIS build: Confirmed problems while building using Qgis 2.18.4 with python2-sip and sip 4.19.1 in Archlinux:... Xavier Corredor Llano
02:16 AM Feature request #15927: Y format parameter for Tile Server (XYZ) layers: Can you point me to a server I can use? It seems relatively difficult to find a publicly available TMS server to test... Martin Dobias

« Previous

Also available in: Atom

QGIS » QGIS Application

Activity

Activity

2017-03-26

2017-03-25

2017-03-24

2017-03-23

2017-03-22

2017-03-21

2017-03-20

2017-03-19

2017-03-18

2017-03-17

2017-03-16

2017-03-15

2017-03-14

2017-03-13

2017-03-12

2017-03-11

2017-03-10

2017-03-09

2017-03-08

2017-03-07

2017-03-06

2017-03-05

2017-03-04

2017-03-03

2017-03-02

2017-03-01

2017-02-28

2017-02-27

2017-02-26

2017-02-25