Activity

From 2011-03-20 to 2011-04-18

2011-04-18

11:37 PM Bug report #2962 (In Progress): Double draw of layer when selecting and deselecting legend layer ...
sunilkcube -
04:26 PM Bug report #1576 (Closed): wms: no way to set width and height, but no error message when beyond max
error reporting improved in commit:a41769fd (SVN r15458). Jürgen Fischer
04:26 PM Bug report #1576 (Closed): wms: no way to set width and height, but no error message when beyond max
error reporting improved in commit:a41769fd (SVN r15458). Jürgen Fischer
12:01 PM Bug report #3693: Major system-wide crash on Composer when paper-size option is clicked.
Replying to [comment:3 mayeulk]:
Of course I meant:
...
Mayeul Kauffmann
11:57 AM Bug report #3693: Major system-wide crash on Composer when paper-size option is clicked.
Tested on commit:d4f7eed7 (SVN r15738) with Kubuntu 10.10 64 bits. Everything OK.
Installed with this /etc/apt/sourc...
Mayeul Kauffmann
07:44 AM Bug report #3687: Unable to export large / high resolution / detailed scale maps
Was away for a bit, here are the answers to all of the great questions and discussion that have been going on... At t... bderstine -
03:48 AM Bug report #3504: Zoom to full or layer extent fails after OTF transformation
Probably fixed in commit:79c0c470 (SVN r15755) Alexander Bruy
03:45 AM Bug report #3085: Wrong histogram builds over Int16 rasters
See also #3349 Alexander Bruy
03:45 AM Bug report #3349: Histogram is wrong if raster has negative values
See also #3085 Alexander Bruy
03:41 AM Bug report #2497: ftools: difference tool (asymmetrical difference) does not work with multipolyg...
I'll give new links asap, not before testing again the problem. Giovanni Manghi
03:40 AM Bug report #2497: ftools: difference tool (asymmetrical difference) does not work with multipolyg...
Samples are not available anymore Alexander Bruy
03:36 AM Feature request #3552 (Closed): Default selection mode
Duplicate #3553 Alexander Bruy
03:36 AM Feature request #3552 (Closed): Default selection mode
Duplicate #3553 Alexander Bruy
03:21 AM Bug report #3723: Transparency settings are not applied from *.qml
Well, using attached sample after applying mcd45.qml to raster following pixels should be transparent: 0.000000, 9998... Alexander Bruy
03:13 AM Bug report #3642 (Closed): Printing: symbols in legend smaller than on the map
I tried again, and I can no longer reproduce the problem. Puzzling. Closing it for now. Paolo Cavallini
03:13 AM Bug report #3642 (Closed): Printing: symbols in legend smaller than on the map
I tried again, and I can no longer reproduce the problem. Puzzling. Closing it for now. Paolo Cavallini
02:48 AM Bug report #3700: SVG Patterns: rotated patterns do not scale well during printing
works well, thanks Andreas Neumann
02:33 AM Bug report #3738: wms tiles does not work
confirmed on trunk/Ubuntu Giovanni Manghi
02:23 AM Bug report #3738: wms tiles does not work
We exposed our wms-c tile service, only the map with problems:
http://webapps.comune.trento.it/tile
test it.
Fo...
luca76 -

2011-04-17

12:57 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
It is probable that this has been solved in GRASS 6.4.1
Waiting for the new version to enter osgeo4w to confirm it.
Giovanni Manghi
04:19 PM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
Merged with #3364. Anne Ghisla
12:55 AM Bug report #3755 (Closed): gdalwarp error# 126: cannot find gdal_ECW_JP2ECW.dll
The error will go away if you remove the gdal-ecw package.
It does not make sense to install it if you then do not c...
Giovanni Manghi
12:55 AM Bug report #3755 (Closed): gdalwarp error# 126: cannot find gdal_ECW_JP2ECW.dll
The error will go away if you remove the gdal-ecw package.
It does not make sense to install it if you then do not c...
Giovanni Manghi
12:08 AM Bug report #3755: gdalwarp error# 126: cannot find gdal_ECW_JP2ECW.dll
The "ERROR 1: Can't load requested DLL" aren't significant but "Failed to allocate 375378345 byte source buffer" is. ... Even Rouault
02:45 PM Bug report #3755 (Closed): gdalwarp error# 126: cannot find gdal_ECW_JP2ECW.dll
Using latest trunk;
command:
gdalwarp -s_srs EPSG:26910 -t_srs EPSG:2229 -wm 1000 -multi -of GTiff "D:/GIS data/Sou...
howslo -
11:56 PM Bug report #3757 (Closed): "use project crs" does not work correctly
"Options>CRS>Coordinate Reference System for new layers>Use project CRS" does not work correctly:
When loading a lay...
Alister Hood
08:10 PM Feature request #3756 (Closed): Flexible positioning of scalebar/compass
I usually save my maps from the view as image (rather than using print composer). I would be really useful to have an... whatnick -
06:30 PM Bug report #1963: "Ghost Lines" when using Anti-aliasing, polygons with shared boundaries, and no...
Okay. springmeyer -
02:56 PM Bug report #1963 (Closed): "Ghost Lines" when using Anti-aliasing, polygons with shared boundarie...
Reading the the referenced article it seems they only were inspired by AGG and didnt directly use any source code fro... Tim Sutton
02:56 PM Bug report #1963 (Closed): "Ghost Lines" when using Anti-aliasing, polygons with shared boundarie...
Reading the the referenced article it seems they only were inspired by AGG and didnt directly use any source code fro... Tim Sutton
04:17 PM Bug report #3364 (Closed): Crash when loading a GRASS vector
Marking as duplicate of #3648 even if the latter is newer, as it has been analysed in more detail. Anne Ghisla
04:17 PM Bug report #3364 (Closed): Crash when loading a GRASS vector
Marking as duplicate of #3648 even if the latter is newer, as it has been analysed in more detail. Anne Ghisla
03:36 PM Bug report #2349 (Closed): Data not displayed with on the fly projection
duplicate of #2426 Jürgen Fischer
03:36 PM Bug report #2349 (Closed): Data not displayed with on the fly projection
duplicate of #2426 Jürgen Fischer
01:46 PM Bug report #2349: Data not displayed with on the fly projection
Replying to [comment:4 rduivenvoorde]:
> As soon als you pan the 180/-180 line out of the mapcanvas points are shown...
Chris Crook
12:31 PM Bug report #2349: Data not displayed with on the fly projection
Perhaps an issue of the global wrap around not handled correctly? See my comment in #3508 Markus Neteler
12:18 PM Bug report #2349: Data not displayed with on the fly projection
Investigating this it appears only to show up if the dateline (180/-180) is in the mapcanvas view.
As soon als you p...
Richard Duivenvoorde
03:30 PM Bug report #3508 (Closed): Custom projection issues
duplicate of #2426 Jürgen Fischer
03:30 PM Bug report #3508 (Closed): Custom projection issues
duplicate of #2426 Jürgen Fischer
12:32 PM Bug report #3508: Custom projection issues
See also #2349 Markus Neteler
12:27 PM Bug report #3508: Custom projection issues
This is an issue of the global wrap around apparently not handled correctly. For illustration, I have imported the ma... Markus Neteler
03:22 PM Bug report #2426 (Closed): On-the-fly projection issues with large extents
fixed in commit:79c0c470 (SVN r15755). Jürgen Fischer
03:22 PM Bug report #2426 (Closed): On-the-fly projection issues with large extents
fixed in commit:79c0c470 (SVN r15755). Jürgen Fischer
12:29 PM Bug report #2426: On-the-fly projection issues with large extents
Perhaps an issue of the global wrap around not handled correctly? See my comment in #3508 Markus Neteler
02:50 PM Bug report #3652: labels buffer: wrong results if data defined setting is used for size
Does it happen with every dataset? Is that maybe related to the font chosen? Anne Ghisla
02:44 PM Bug report #3605 (Closed): on trunk, legend items vertical spacing inconsistent, worked fine with...
In my opinion, it does not make sense to introduce a new gui element just to have more convenient way to enable old b... Marco Hugentobler
02:44 PM Bug report #3605 (Closed): on trunk, legend items vertical spacing inconsistent, worked fine with...
In my opinion, it does not make sense to introduce a new gui element just to have more convenient way to enable old b... Marco Hugentobler
02:34 PM Bug report #3723: Transparency settings are not applied from *.qml
What are the exact steps to reproduce the problem?
I can load the style file, and transparency is set to None (255)...
Anne Ghisla
02:01 PM Bug report #3190 (Closed): SVG markers with centered labels issue
Unfortunately this is how Qt loads that SVG, so it's not actually QGIS problem - if you open SVG Viewer example from ... Martin Dobias
02:01 PM Bug report #3190 (Closed): SVG markers with centered labels issue
Unfortunately this is how Qt loads that SVG, so it's not actually QGIS problem - if you open SVG Viewer example from ... Martin Dobias
12:28 PM Bug report #3579: Crash after opening multiple attribute tables in dock window
Testing on Debian Squeeze, Gnome. Still crashing every time. Ivan Mincik
04:32 AM Bug report #3579: Crash after opening multiple attribute tables in dock window
QGIS commit:f8e10a33 (SVN r15725), Fedora 14, XFCE 4.6.2, Qt 4.7.1.
I followed steps to reproduce the bug, but QGIS ...
Anne Ghisla
02:56 AM Bug report #3579: Crash after opening multiple attribute tables in dock window
Confirmed on Ubuntu 10.04 Nathan Woodrow
12:26 PM Bug report #2227: GPS Tools: "Import other file" doesn't work
issue is still present:
http://gis-lab.info/images/screenshots/20110417-120-11kb.jpg
Maxim Dubinin
12:22 PM Bug report #3754 (Closed): Printing does not render well (legend)
Printing the legend does not work well; in particular, the legend in the two files https://int.faunalia.it/~paolo/bad... Paolo Cavallini
12:19 PM Feature request #2754 (Closed): Snapping to switched off layers
Marco Hugentobler
12:17 PM Feature request #2754: Snapping to switched off layers
In my opinion, we should not overwrite the snap settings based on the visibility of layers. It would lead to an incon... Marco Hugentobler
08:22 AM Feature request #2754: Snapping to switched off layers
Here is patch to that implements snapping only to visible layers Alexander Bruy
12:18 PM Bug report #3753 (Closed): "Zoom to best scale" takes a long time (inf?) for TMS layers.
Not long ago the Zoom To Best Scale was working fine with TMS layers (and was an important feature, allowing to synch... Borys Jurgiel
12:16 PM Bug report #3504: Zoom to full or layer extent fails after OTF transformation
Pretty sure #2349 is also a dateline problem Richard Duivenvoorde
12:11 PM Bug report #2915 (Closed): Rendering glitches with new symbology
can't reproduce it anymore, closing. Maxim Dubinin
12:11 PM Bug report #2915 (Closed): Rendering glitches with new symbology
can't reproduce it anymore, closing. Maxim Dubinin
11:38 AM Feature request #3752 (Open): Clicking inside the polygon with the Node tool
Right now, one needs to click on the edge of the polygon. This is rather inconvinient, because a) you have to aim har... Maxim Dubinin
11:31 AM Feature request #2241: "Node tool" should remember last feature which it was used on after switch...
Replying to [comment:4 jef]:
> I think the only problem here is that the node tool doesn't keep the feature
> current...
Maxim Dubinin
11:19 AM Bug report #2630 (Closed): "merge selected features" tool produce strange numbers in the table
Maxim Dubinin
10:27 AM Bug report #3531 (Closed): Bug: QgisApp instance never delete
Fixed in commit:99a32059 (SVN r15752) Martin Dobias
10:27 AM Bug report #3531 (Closed): Bug: QgisApp instance never delete
Fixed in commit:99a32059 (SVN r15752) Martin Dobias
06:28 AM Bug report #3531: Bug: QgisApp instance never delete
Just set a breakpoint in [[QgisApp]]'s destructor, and close application. Debugger won't go there.
Try to have a loo...
05092009 -
09:26 AM Bug report #3091 (Closed): Stretch is canceled after calculating pyramids
it doesn't now, [[WinXP]], commit:fbd10b55 (SVN r15741), closing. Maxim Dubinin
09:26 AM Bug report #3091 (Closed): Stretch is canceled after calculating pyramids
it doesn't now, [[WinXP]], commit:fbd10b55 (SVN r15741), closing. Maxim Dubinin
08:36 AM Feature request #1276 (Closed): Allow for smaller icon display
Starting from commit:4c53217a (SVN r15137) there is an option in QGIS settings to set icon size to 16, 24, or 32 px. Alexander Bruy
08:36 AM Feature request #1276 (Closed): Allow for smaller icon display
Starting from commit:4c53217a (SVN r15137) there is an option in QGIS settings to set icon size to 16, 24, or 32 px. Alexander Bruy
08:27 AM Bug report #3603: r.colors has no effect on GRASS rasters (after the merge of the rasters branch)
Replying to [comment:2 pcav]:
> Furthermore, new layers will have a greyscale istead of appropriate color, as it happ...
Redmine Admin
08:18 AM Bug report #3603 (Closed): r.colors has no effect on GRASS rasters (after the merge of the raste...
Fixed in commit:d7d7caf4 (SVN r15750).
GRASS provider is now completely reloaded if source data have changed. That i...
Redmine Admin
08:18 AM Bug report #3603 (Closed): r.colors has no effect on GRASS rasters (after the merge of the raste...
Fixed in commit:d7d7caf4 (SVN r15750).
GRASS provider is now completely reloaded if source data have changed. That i...
Redmine Admin
07:51 AM Bug report #3693: Major system-wide crash on Composer when paper-size option is clicked.
installed qgis via ppa:ubuntugis/ubuntugis-unstable (after removal of other version) also
cannot reproduce this cra...
Richard Duivenvoorde
07:34 AM Bug report #3693: Major system-wide crash on Composer when paper-size option is clicked.
testing the crash here on 11.04 64 bit beta
installed
http://qgis.org/debian-nightly natty
Linux zwam 2.6.38-8-gen...
Richard Duivenvoorde
07:38 AM Bug report #1576: wms: no way to set width and height, but no error message when beyond max
Replying to [comment:6 pcav]:
> Still true?
yes, easily replicable with
http://www.ngi.be/testbed/wms/top50r_l72_fr
Giovanni Manghi
07:21 AM Bug report #3751: Astyle is installed
On runtime? It gets installed. Volker Fröhlich
06:49 AM Bug report #3751: Astyle is installed
what's the problem with that? we need our version of astyle. Jürgen Fischer
06:43 AM Bug report #3751 (Closed): Astyle is installed
Excerpt from src/astyle/cmake_install.cmake:
...
IF(NOT CMAKE_INSTALL_COMPONENT OR "${CMAKE_INSTALL_COMPONENT}" STR...
Volker Fröhlich
07:18 AM Feature request #2992 (In Progress): "file name" widget, QGIS on Windows hosts & actions
Jürgen Fischer
06:49 AM Feature request #2992: "file name" widget, QGIS on Windows hosts & actions
Here is patch that change directory separators into native. Alexander Bruy
07:10 AM Bug report #2714: Crash when resizing map window with Qt 4.6
I can reproduce this bug with a huge shapefile - 37k points - and resize the main window from a corner twice. It happ... Anne Ghisla
07:06 AM Bug report #3581: Ftools: union tool leave holes in output
they are both in EPSG 3003 Giovanni Manghi
04:54 AM Bug report #3581: Ftools: union tool leave holes in output
comuni is missing prj file
and prj file of buff_shp seems to be incorrect
I'd try unioning these two, but without kn...
Maxim Dubinin
03:46 AM Bug report #3581: Ftools: union tool leave holes in output
Try this link
http://ubuntuone.com/p/n9O/
Giovanni Manghi
06:59 AM Feature request #3911 (Closed): WMS Provider obtained in QgsWMSSourceSelect should be passed to Q...
fixed in commit:a168fb98 (SVN r15748). Jürgen Fischer
06:59 AM Feature request #3911 (Closed): WMS Provider obtained in QgsWMSSourceSelect should be passed to Q...
fixed in commit:a168fb98 (SVN r15748). Jürgen Fischer
06:40 AM Bug report #3750 (Closed): Field calaculator: $x and $y functions always return result as integer...
fixed in commit:2a136691 (SVN r15747). Jürgen Fischer
06:40 AM Bug report #3750 (Closed): Field calaculator: $x and $y functions always return result as integer...
fixed in commit:2a136691 (SVN r15747). Jürgen Fischer
06:00 AM Bug report #3750 (Closed): Field calaculator: $x and $y functions always return result as integer...
Even if the datatype for the column is correctly set to decimal number with some kind of precision.
Using trunk on U...
Giovanni Manghi
06:12 AM Bug report #3523 (Closed): export/add geometry columns does not work if shape is obtained from kml
Giovanni Manghi
06:11 AM Bug report #3523: export/add geometry columns does not work if shape is obtained from kml
Well spotted. We can definitely close this ticket. I believe that it would also be better to add a note to the docume... Giovanni Manghi
06:07 AM Bug report #3417: Data handling when exporting/printing maps
I was able to export an A0 rasterized PDF and a PNG, both of around 60MB, showing both the raster and vector map I us... Anne Ghisla
04:51 AM Bug report #3687: Unable to export large / high resolution / detailed scale maps
I'm running QGIS commit:f8e10a33 (SVN r15725), Fedora 14, 2GB RAM, and I get the same messages as mayeulk and gislab,... Anne Ghisla
04:24 AM Bug report #3687: Unable to export large / high resolution / detailed scale maps
Replying to [comment:2 mayeulk]:
> To create image 28086x19866 requires about 1673 MB of memory. Proceed?
> I clicked...
Maxim Dubinin
04:24 AM Bug report #3308 (Closed): Edit UI: either comboboxes and spinboxes don't show the feature's curr...
I close the ticket, it works.
I've just to set the type of widgets in Layer Properties -> Fields.
Giuseppe Sucameli
04:24 AM Bug report #3308 (Closed): Edit UI: either comboboxes and spinboxes don't show the feature's curr...
I close the ticket, it works.
I've just to set the type of widgets in Layer Properties -> Fields.
Giuseppe Sucameli
04:06 AM Bug report #3170: many GDAL Tools don't work in OS X standalone
python path setting is disabled because not implemented yet. I think would be better to hide it.
However, you can use...
Giuseppe Sucameli
04:04 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Hi,
Unfortunately the bug is still there with commit:c1a768a1 (SVN r15742) (with 0.000001 as snapping option in map ...
Mayeul Kauffmann
03:56 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
enabling 'topological editing' also plays an important role. With it enabled, qgis inserts new vertices and the bug i... Marco Hugentobler
03:23 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Hi Marco,
I will look at it. In the meantime, I found this:
same bug with tolerance: 0.0001(in map units)
same bug...
Mayeul Kauffmann
03:03 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
You could check if the polygons are really have a common boundary with the merge edit tool in QGIS.
Could you try if...
Marco Hugentobler
02:53 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
I can reproduce the bug on the shapefile I attached with those parameters:
For the shapefile I attached:
tolerance:...
Mayeul Kauffmann
02:28 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Wait, I managed to reproduce the mentioned issue with the test shape. So probably using a more sensitive rounding tol... Marco Hugentobler
02:24 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
The removePolygonIntersction method from QGIS just calls difference() method from geos repeatedly.
Taking the attach...
Marco Hugentobler
03:57 AM Bug report #3746: Not recognizing Shapefile Projection
@anitagraser - Thank you for the confirmation of this problem.
@aghisla - I installed the qgis-dev development versi...
rmercer -
03:41 AM Bug report #3746 (Closed): Not recognizing Shapefile Projection
rmercer, can you then upgrade using OSGeo4W and choosing qgis-dev (nightly build of current development version, avai... Anne Ghisla
03:41 AM Bug report #3746 (Closed): Not recognizing Shapefile Projection
rmercer, can you then upgrade using OSGeo4W and choosing qgis-dev (nightly build of current development version, avai... Anne Ghisla
03:19 AM Bug report #3746: Not recognizing Shapefile Projection
I confirm this problem in 1.6 on Win7. But it has been fixed in my install of commit:7672cbc9 (SVN r15594) so I'd sug... Anita Graser
03:50 AM Bug report #2435: Error when using query builder if layer name is in cyrrilics
still doesn't work
poor users of cyrillic layernames
Maxim Dubinin
03:12 AM Bug report #2283 (Closed): node tool/select features tool do not have effects on a shapefile
Hi, I tested again on trunk the problematic shaped and now it works all fine. So I'm closing this. Giovanni Manghi
03:12 AM Bug report #2283 (Closed): node tool/select features tool do not have effects on a shapefile
Hi, I tested again on trunk the problematic shaped and now it works all fine. So I'm closing this. Giovanni Manghi
02:05 AM Bug report #3119: actions not working if local OS is not "en" and "override system locale" (to en...
Can't reproduce with commit:d7d7caf4 (SVN r15750) on Linux and Windows (both with Russian locale) Alexander Bruy

2011-04-16

12:59 AM Bug report #3679 (Closed): eVis not working with point layers
Should be fixed in commit:fbd10b55 (SVN r15741) Alexander Bruy
12:59 AM Bug report #3679 (Closed): eVis not working with point layers
Should be fixed in commit:fbd10b55 (SVN r15741) Alexander Bruy
11:08 PM Bug report #3581: Ftools: union tool leave holes in output
Seems that comuni_shp.zip is broken, I can't extract files. Alexander Bruy
11:02 PM Bug report #3523: export/add geometry columns does not work if shape is obtained from kml
If you examine attached shapefile with ogrinfo, you will see that it has MULTIPOINT geometry type... Alexander Bruy
10:50 PM Bug report #3500 (Closed): fTools: unsufficient field width for Area and Perimeter fields
Alexander Bruy
10:49 PM Bug report #3500: fTools: unsufficient field width for Area and Perimeter fields
Well, I extend field width for AREA, PERIMETER, XCOORD and YCOORD in commit:3c0f834e (SVN r15740).
But I think it is...
Alexander Bruy
10:38 PM Bug report #3500 (In Progress): fTools: unsufficient field width for Area and Perimeter fields
Alexander Bruy
05:13 PM Bug report #1451: High usage of CPU when moving mouse over map canvas
The problem is still there. Ubuntu, Qt 4.7.0.
It is not necessary to pan/zoom a layer. This happens even with empty ...
Martin Dobias
10:15 AM Bug report #1451: High usage of CPU when moving mouse over map canvas
I can't confirm with commit:f8e10a33 (SVN r15725), qt 4.7.1 on Fedora. CPU usage by QGIS is mainly under 10% while pa... Anne Ghisla
05:08 PM Bug report #3687: Unable to export large / high resolution / detailed scale maps
I made a tougher test: export 20% of OSM data for Italy on a 11 meter by 8 meter (sic) pdf vector map. It crashed aft... Mayeul Kauffmann
04:51 PM Bug report #3687: Unable to export large / high resolution / detailed scale maps
I successfully created an A4 600 dpi map (11Mb in png, 3 Mb in vector pdf) on Kubuntu 10.10 (64 bits).
However, I tr...
Mayeul Kauffmann
05:55 AM Bug report #3687: Unable to export large / high resolution / detailed scale maps
I cannot confirm, just tried on [[WinXP]], commit:f42443c9 (SVN r15701).
Can you provide more specifics on what are ...
Maxim Dubinin
03:52 PM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Hi,
I can confirm most of the above, with some comments which might help debugging.
You can try this query:...
Mayeul Kauffmann
03:21 PM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Yes, it really is. I spent few hours trying to understand, where can be the problem. Apparently this function itself ... pavolsk -
12:00 PM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Is this really so bad to be blocking for 1.7? Paolo Cavallini
01:14 PM Bug report #3504: Zoom to full or layer extent fails after OTF transformation
See also #3508 and #2426 Alexander Bruy
12:48 PM Bug report #3746: Not recognizing Shapefile Projection
Well, I finally got the zip file to contain all necessary files. It now will not upload because it is too large for ... rmercer -
12:23 PM Bug report #3746: Not recognizing Shapefile Projection
I'm sorry, but still the zip file misses the dbf...
What happens if you remove (simply renaming is enough) the prj f...
Anne Ghisla
12:14 PM Bug report #3746: Not recognizing Shapefile Projection
Sorry about the error with the shapefile. I uploaded a new zip that contains all of the necessary files, shp, shx, d... rmercer -
09:17 AM Bug report #3746: Not recognizing Shapefile Projection
The zip file misses the dbf, and the .shp has a further .xml extension, so I tried to reproduce the problem with my o... Anne Ghisla
02:06 AM Bug report #3746 (Closed): Not recognizing Shapefile Projection
I am continually running into an error where I will load a shapefile with an existing, defined projection, into QGIS.... rmercer -
12:26 PM Feature request #3039: symbol levels ignored for rule based rendering
Patch available with ticket #3222 at:
http://trac.osgeo.org/qgis/attachment/ticket/3222/patch_on_r15676-rbr_symbol-l...
Mayeul Kauffmann
12:18 PM Bug report #3261 (Closed): Rendering bug
Replying to [comment:2 gislab]:
> can't reproduce it as well on winXP commit:f42443c9 (SVN r15701)
I can no longer r...
Chris Crook
12:18 PM Bug report #3261 (Closed): Rendering bug
Replying to [comment:2 gislab]:
> can't reproduce it as well on winXP commit:f42443c9 (SVN r15701)
I can no longer r...
Chris Crook
06:37 AM Bug report #3261: Rendering bug
can't reproduce it as well on winXP commit:f42443c9 (SVN r15701) Maxim Dubinin
06:25 AM Bug report #3261: Rendering bug
Can you give the spatial extent of the view, e.g. saving it as spatial bookmark?
Is it happening also on other platf...
Anne Ghisla
12:18 PM Bug report #3140: Download data from GPS doesn't work
Is this confirmed? Does not seem serious enough to be blocking. Paolo Cavallini
12:15 PM Bug report #3170: many GDAL Tools don't work in OS X standalone
Not a blocker for general release, just for standalone.
As mentioned, there is a [[GdalTools]] setting to set the py...
William Kyngesburye
12:09 PM Feature request #3748: Centralized way of sharing styles
I think your suggestions are pretty much what I meant, But I will leave the ticket open to see what others think.
If...
Saber Razmjooei
10:31 AM Feature request #3748: Centralized way of sharing styles
I think this implies several components (so the ticket could be split):
* add .qgis/symbols to the standard path whe...
Paolo Cavallini
09:46 AM Feature request #3748 (Closed): Centralized way of sharing styles
It will be great to have a central repository of styles and SVGs. There could be a python-installer-like interface to... Saber Razmjooei
12:08 PM Bug report #3650 (Closed): shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk ...
Most likely a duplicate of #3364 and #3648 Paolo Cavallini
12:08 PM Bug report #3650 (Closed): shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk ...
Most likely a duplicate of #3364 and #3648 Paolo Cavallini
12:07 PM Bug report #3364: Crash when loading a GRASS vector
See also #3648 and #3650 Paolo Cavallini
12:06 PM Bug report #3467: Label Buffers Produces Extremely Bloated PDF Export (Vector) under Linux.
Hi Marco,
This is with the old labeling engine (available through the vector property dialog).
When opening the qgi...
Mayeul Kauffmann
11:35 AM Bug report #3467: Label Buffers Produces Extremely Bloated PDF Export (Vector) under Linux.
I' m looking at this
Mayeul
Mayeul Kauffmann
06:00 AM Bug report #3467: Label Buffers Produces Extremely Bloated PDF Export (Vector) under Linux.
Is this with the old labeling engine (available through the vector property dialog) or with the new one (the abc-tool)? Marco Hugentobler
12:04 PM Bug report #3078 (Closed): Scotese's shapefiles causes Tethys to crash
most likely a duplicate of #2837 (upstream bug already fixed in GDAL 1.7.3) Jürgen Fischer
12:04 PM Bug report #3078 (Closed): Scotese's shapefiles causes Tethys to crash
most likely a duplicate of #2837 (upstream bug already fixed in GDAL 1.7.3) Jürgen Fischer
11:50 AM Feature request #3911 (Feedback): WMS Provider obtained in QgsWMSSourceSelect should be passed to...
Paolo Cavallini
11:10 AM Feature request #3911 (Closed): WMS Provider obtained in QgsWMSSourceSelect should be passed to Q...
Paolo Cavallini
11:29 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Replying to [comment:8 pcav]:
> Can we include it in 1.7?
I ask Martin to review it. If there is no objections, I'll ...
Alexander Bruy
10:40 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Can we include it in 1.7? Paolo Cavallini
10:38 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Here is complete patch to fix this issue Alexander Bruy
11:21 AM Feature request #1395 (Closed): Add / move vertex to given x/y-coordinate
Done with [[NumericalDigitize]] plugin Paolo Cavallini
11:21 AM Feature request #1395 (Closed): Add / move vertex to given x/y-coordinate
Done with [[NumericalDigitize]] plugin Paolo Cavallini
10:38 AM Bug report #2102 (Closed): Strange rendering artefacts for points
I cannot notice any artifact with QGIS commit:eb3a5357 (SVN r15702), Qt 4.7.2-3 on Debian testing. Please reopen if n... Paolo Cavallini
10:38 AM Bug report #2102 (Closed): Strange rendering artefacts for points
I cannot notice any artifact with QGIS commit:eb3a5357 (SVN r15702), Qt 4.7.2-3 on Debian testing. Please reopen if n... Paolo Cavallini
10:31 AM Bug report #2102: Strange rendering artefacts for points
Is it still reproduceable? Anne Ghisla
10:12 AM Bug report #2427 (Closed): Can't build pyramids for IMG files
it works now.
[[WinXP]], commit:f42443c9 (SVN r15701)
Maxim Dubinin
10:12 AM Bug report #2427 (Closed): Can't build pyramids for IMG files
it works now.
[[WinXP]], commit:f42443c9 (SVN r15701)
Maxim Dubinin
10:10 AM Feature request #3569: OGR DateTime fields support
Replying to [comment:3 jef]:
> Replying to "jekhor":/issues/show/3569:
> > Now QGis doesn't support [[DateTime]] fiel...
jekhor -
04:22 AM Feature request #3569: OGR DateTime fields support
Replying to "jekhor":/issues/show/3569:
> Now QGis doesn't support [[DateTime]] fields in OGR datasources and convert...
Jürgen Fischer
10:01 AM Bug report #1343: dxf2shp plugin does not distinguish between polygon and polyline correctly
brian, can you reproduce the bug, loading the DXF via Add vector layer dialog?
If you don't have GDAL >=1.7, can you...
Anne Ghisla
09:49 AM Feature request #3707 (Closed): Deleting Shapefile columns
Applied in . Thanks Stemby! Anne Ghisla
09:49 AM Feature request #3707 (Closed): Deleting Shapefile columns
Applied in . Thanks Stemby! Anne Ghisla
09:47 AM Bug report #3749 (Closed): labels out of view for long straight lines
When a line feature as only one segment (2 points), the label is put in the middle, even if the middle is out of the ... Mayeul Kauffmann
09:43 AM Bug report #3740: WMS Rendering problem - jagged lines
this might be a duplicate of #3734, if so it might be fixed in commit:55588f61 (SVN r15732). Would please test again... Jürgen Fischer
09:17 AM Bug report #3660 (Closed): Identify Feature not working with WMS layer
Jürgen Fischer
09:06 AM Feature request #2063: wrapper for R and GRASS
Sextance uses GRASS in a very efficient way, no need to understand GRASS' location-mapset concept. It creates a mapse... Markus Neteler
06:34 AM Feature request #2063: wrapper for R and GRASS
Concerning on the fly GRASS locations, see this example of a simple implementation: http://grass.osgeo.org/wiki/GRASS... Paolo Cavallini
08:23 AM Bug report #3712 (Closed): Python console paste error
Borys Jurgiel
08:23 AM Bug report #3712: Python console paste error
Fixed in commit:a8c2cfc2 (SVN r15730). Now it's appended at the end only if either: the pasted text is multi-line or ... Borys Jurgiel
08:07 AM Bug report #3531: Bug: QgisApp instance never delete
Which are the steps and the setup to reproduce this bug? Anne Ghisla
07:25 AM Bug report #3439 (Closed): QGIS crashes when reshaping invalid polygon geometry
fixed in commit:8196c87d (SVN r15729). Jürgen Fischer
07:25 AM Bug report #3439 (Closed): QGIS crashes when reshaping invalid polygon geometry
fixed in commit:8196c87d (SVN r15729). Jürgen Fischer
07:16 AM Bug report #3395: Field Calculator Integer Conversion Error
I tried to reproduce the bug.
If I set the type of the new field as integer, the formula outputs 3 and 10 as expecte...
Anne Ghisla
06:46 AM Bug report #2405 (Closed): ftools does not always work with Spatialite
buffering spatialite layer - works
Export to new projection - this instrument is no longer in ftools
simplify - works...
Maxim Dubinin
06:46 AM Bug report #2405 (Closed): ftools does not always work with Spatialite
buffering spatialite layer - works
Export to new projection - this instrument is no longer in ftools
simplify - works...
Maxim Dubinin
06:41 AM Bug report #3642: Printing: symbols in legend smaller than on the map
I mean that in the pdf printout the symbols shown in the main map area are of a widely different size from those on t... Paolo Cavallini
05:52 AM Bug report #3642: Printing: symbols in legend smaller than on the map
Do you mean the size is different in the composer window or in the printout? The composer preview does not yet suppor... Marco Hugentobler
06:36 AM Bug report #3725: Offline Editing plugin issues on both Linux and Windows using trunk
It seems that can be something related with the table structure/datatypes. Can you provide a small sample of the data... Giovanni Manghi
06:27 AM Bug report #2283: node tool/select features tool do not have effects on a shapefile
I will give another link asap Giovanni Manghi
06:18 AM Bug report #2283: node tool/select features tool do not have effects on a shapefile
the weblink is broken Maxim Dubinin
06:26 AM Bug report #2330 (Closed): Loading missing layer (shapefile) requires changing the "Files of type...
seems like this is not an issue anymore with new missing layers dialog
tested under [[WinXP]], commit:f42443c9 (SVN ...
Maxim Dubinin
06:26 AM Bug report #2330 (Closed): Loading missing layer (shapefile) requires changing the "Files of type...
seems like this is not an issue anymore with new missing layers dialog
tested under [[WinXP]], commit:f42443c9 (SVN ...
Maxim Dubinin
06:25 AM Bug report #3745 (Closed): Delimited text layer not loaded when using relative paths
fixed in commit:e975603c (SVN r15727). Jürgen Fischer
06:25 AM Bug report #3745 (Closed): Delimited text layer not loaded when using relative paths
fixed in commit:e975603c (SVN r15727). Jürgen Fischer
06:17 AM Bug report #2181: "add to overview" menu item does not work
both rasters and vector can be added to overview under [[WinXP]], commit:f42443c9 (SVN r15701)
example: http://gis-l...
Maxim Dubinin
06:16 AM Feature request #3243: Spatial bookmarks do not take into account CRS
Spatial bookmarks indeed save the extent from project CRS; I agree that it would be nice to enable bookmark reproject... Anne Ghisla
06:15 AM Bug report #2569: suppress blank lines in GRASS output
It would be nice to get that improved. Thanks. Markus Neteler
06:11 AM Bug report #1735: Support newer GRASS version (modules directories)
In my opinion the support for GRASS 6.3 can be dropped. Markus Neteler
06:08 AM Bug report #3163: GRASS Options tab use system locale
See also ticket #3634 Markus Neteler
06:08 AM Bug report #3634: GRASS language is taken from system, not from QGIS settings
See also ticket #3163 Markus Neteler
06:06 AM Bug report #3164: Gibberish in output tab of GRASS tools
I suspect that the v.in.ogr GRASS message catalogue (po file) is in a different encoding that QGIS understands. Note ... Markus Neteler
06:00 AM Bug report #3233: Non-latin characters not available
Can you attach the .mdb file, or a part of it with few lines from every language if it's big? We'll try to reproduce ... Anne Ghisla
05:40 AM Bug report #3709 (Closed): Spatialite editing not working
worksforme on polygonal layer in [[WinXP]], commit:f42443c9 (SVN r15701) Maxim Dubinin
05:40 AM Bug report #3709 (Closed): Spatialite editing not working
worksforme on polygonal layer in [[WinXP]], commit:f42443c9 (SVN r15701) Maxim Dubinin
05:36 AM Bug report #3047 (Closed): delimited text plugin: import fails if an extra delimiter is at the end
With commit:f8e10a33 (SVN r15725), adding extra delimiters at end of random lines does not prevent correct loading.
...
Anne Ghisla
05:36 AM Bug report #3047 (Closed): delimited text plugin: import fails if an extra delimiter is at the end
With commit:f8e10a33 (SVN r15725), adding extra delimiters at end of random lines does not prevent correct loading.
...
Anne Ghisla
05:15 AM Bug report #3115: Old project layer got lost after installing plug ins and updating
it difficult to say anything on the topic, but the attached project crashes QGIS on commit:f42443c9 (SVN r15701), [[W... Maxim Dubinin
05:06 AM Bug report #3077 (Closed): ftools (merge shapefiles tool): QGIS crashes if shapes are missing the...
worksforme as well, closing, reopen if necessary Maxim Dubinin
05:06 AM Bug report #3077 (Closed): ftools (merge shapefiles tool): QGIS crashes if shapes are missing the...
worksforme as well, closing, reopen if necessary Maxim Dubinin
05:04 AM Bug report #2636 (Closed): Connection to CSV layer cannot be restored if CSV is moved
With commit:880088c1 (SVN r15704) (and probably older revisions, but I didn't test), moving the CSV file raises a "Ha... Anne Ghisla
05:04 AM Bug report #2636 (Closed): Connection to CSV layer cannot be restored if CSV is moved
With commit:880088c1 (SVN r15704) (and probably older revisions, but I didn't test), moving the CSV file raises a "Ha... Anne Ghisla
04:53 AM Bug report #2597 (Closed): Adding layer is changed the last extent
worksforme as well, [[WinXP]], commit:f42443c9 (SVN r15701)
reopen if necessary
Maxim Dubinin
04:53 AM Bug report #2597 (Closed): Adding layer is changed the last extent
worksforme as well, [[WinXP]], commit:f42443c9 (SVN r15701)
reopen if necessary
Maxim Dubinin
04:32 AM Bug report #2500 (Closed): Broken copy functionality in python error output window
Works now on Windows XP, commit:f42443c9 (SVN r15701). Closing it! Anne Ghisla
04:32 AM Bug report #2500 (Closed): Broken copy functionality in python error output window
Works now on Windows XP, commit:f42443c9 (SVN r15701). Closing it! Anne Ghisla
03:56 AM Feature request #3394 (Closed): Update IGNF's projections register
Closing this ticket as upstream, the changes have to be made in proj4. Jean-Roc Morreale
03:56 AM Feature request #3394 (Closed): Update IGNF's projections register
Closing this ticket as upstream, the changes have to be made in proj4. Jean-Roc Morreale
02:57 AM Bug report #2762 (Closed): Stored extents is cancelled if layers are switched off and one layer i...
Fixed in commit:d766addf (SVN r15722) Alexander Bruy
02:57 AM Bug report #2762 (Closed): Stored extents is cancelled if layers are switched off and one layer i...
Fixed in commit:d766addf (SVN r15722) Alexander Bruy
02:55 AM Bug report #3508: Custom projection issues
related to #2426 Maxim Dubinin
02:54 AM Bug report #2426: On-the-fly projection issues with large extents
related to #3508 Maxim Dubinin
02:37 AM Bug report #3747 (Closed): Region is not reprojected
The region rectangle drawn in canvas is not reprojected. Redmine Admin

2011-04-15

01:51 AM Bug report #2230: Vertex markers are displayed in Print Composer
More info on this bug. If editing enabled *before* adding layers in Map Composer or in Overview Map then vertex marke... Alexander Bruy
12:40 PM Bug report #2230: Vertex markers are displayed in Print Composer
Confirmed in commit:98d612f2 (SVN r15707) both Windows and Linux Alexander Bruy
01:34 AM Bug report #2899 (Closed): Grid annotations - distance to map frame
Fixed in commit:09aa2817 (SVN r15721) Marco Hugentobler
01:34 AM Bug report #2899 (Closed): Grid annotations - distance to map frame
Fixed in commit:09aa2817 (SVN r15721) Marco Hugentobler
12:58 AM Bug report #3735: GDAL stats not used
To the best of my knowledge, the implementation of GDALComputeRasterStatistics() has not been modified significantly ... Even Rouault
04:55 PM Bug report #3735 (Feedback): GDAL stats not used
Replying to [comment:2 rouault]:
> Tim, I'm a bit surprised by your comments : GDALComputeRasterStatistics() *does* c...
Tim Sutton
04:55 PM Bug report #3735 (Feedback): GDAL stats not used
Replying to [comment:2 rouault]:
> Tim, I'm a bit surprised by your comments : GDALComputeRasterStatistics() *does* c...
Tim Sutton
10:54 AM Bug report #3735: GDAL stats not used
Never mind. I just read your comment again and see that you're planning to cache those stats. Thanks. diodata -
10:52 AM Bug report #3735: GDAL stats not used
Thanks for the explanation. Would it be possible then to store the computed raster statistics in an aux, xml or simi... diodata -
10:48 AM Bug report #3735: GDAL stats not used
Tim, I'm a bit surprised by your comments : GDALComputeRasterStatistics() *does* compute exact min, max, mean and stddev Even Rouault
09:48 AM Bug report #3735 (Closed): GDAL stats not used
Hi
The stats collected by gdal are only partially useful:
- they do not include stddev
- the min/max are estimated
...
Tim Sutton
09:48 AM Bug report #3735 (Closed): GDAL stats not used
Hi
The stats collected by gdal are only partially useful:
- they do not include stddev
- the min/max are estimated
...
Tim Sutton
12:29 AM Bug report #3312 (Closed): Error while save as SQLite into folder with cyrillic symbols
Tested with commit:98d612f2 (SVN r15707) on Windows and Linux and all works fine. So I close this ticket, please reop... Alexander Bruy
12:29 AM Bug report #3312 (Closed): Error while save as SQLite into folder with cyrillic symbols
Tested with commit:98d612f2 (SVN r15707) on Windows and Linux and all works fine. So I close this ticket, please reop... Alexander Bruy
12:22 AM Bug report #3202 (Closed): Interchanges of colors in Random ramp
Alexander Bruy
12:07 AM Bug report #3741 (Closed): Layer from delimited text file throws errors while panning
Should be fixed in commit:136b608d (SVN r15720) Alexander Bruy
12:07 AM Bug report #3741 (Closed): Layer from delimited text file throws errors while panning
Should be fixed in commit:136b608d (SVN r15720) Alexander Bruy
06:47 AM Bug report #3741: Layer from delimited text file throws errors while panning
the error appears only after first panning, the error message doesn't show up afterwards Maxim Dubinin
06:19 AM Bug report #3741 (Closed): Layer from delimited text file throws errors while panning
1. Get the file
2. Add it as a layer with Add XY plugin with the settings like this:
http://gis-lab.info/images/scr...
Maxim Dubinin
02:08 PM Bug report #3745: Delimited text layer not loaded when using relative paths
Uploaded again.
Goyo D
12:13 PM Bug report #3745: Delimited text layer not loaded when using relative paths
Ouch, sorry - bad admin. I just wanted to download the attachment and not deleted it... Jürgen Fischer
11:50 AM Bug report #3745 (Closed): Delimited text layer not loaded when using relative paths
Steps to reproduce:
1. Create a new project.
1. Set save paths to relative in project properties.
1. Load a delimi...
Goyo D
12:59 PM Bug report #3598 (Closed): Histogram stretch to full TMS layer hangs Qgis
Fixed in commit:0ba6f3e4 (SVN r15715). Redmine Admin
12:59 PM Bug report #3598 (Closed): Histogram stretch to full TMS layer hangs Qgis
Fixed in commit:0ba6f3e4 (SVN r15715). Redmine Admin
12:47 PM Bug report #2810 (Closed): Qgis Trunk (r13619M) crashes applying a a raster style (qml) to GRASS ...
Fixed in commit:41f62c4f (SVN r15718) Giuseppe Sucameli
12:47 PM Bug report #2810 (Closed): Qgis Trunk (r13619M) crashes applying a a raster style (qml) to GRASS ...
Fixed in commit:41f62c4f (SVN r15718) Giuseppe Sucameli
12:42 PM Bug report #2810 (In Progress): Qgis Trunk (r13619M) crashes applying a a raster style (qml) to G...
I load a GRASS raster layer, open the layer propriety, Colormap tab, I load a style and I get crash.
Crashes occur a...
Giuseppe Sucameli
10:58 AM Feature request #3066 (Closed): GdalTools: clipping based on a shapefile mask
Fixed in commit:adbcbcbb (SVN r15713). Giuseppe Sucameli
10:58 AM Feature request #3066 (Closed): GdalTools: clipping based on a shapefile mask
Fixed in commit:adbcbcbb (SVN r15713). Giuseppe Sucameli
10:21 AM Bug report #3609 (Closed): in a reprojected raster "zoom to best scale (100%)" does not work
FIxed. Redmine Admin
10:21 AM Bug report #3609 (Closed): in a reprojected raster "zoom to best scale (100%)" does not work
FIxed. Redmine Admin
09:55 AM Bug report #3715 (Closed): GdalTools' pyramids in batch mode remove source files
Fixed in commit:63cc61bb (SVN r15710) Giuseppe Sucameli
09:55 AM Bug report #3715 (Closed): GdalTools' pyramids in batch mode remove source files
Fixed in commit:63cc61bb (SVN r15710) Giuseppe Sucameli
08:42 AM Bug report #3709: Spatialite editing not working
In Debian testing apparently it works well. Anyone confirms, on Windows or other platforms? Does this happen with jus... Paolo Cavallini
08:37 AM Bug report #3744: Different behavior for mapcanvas and layout with scale dependent rendering
The bug is definitely with the map canvas and not print composer.
Easier procedure to replicate:
Do 1-2-3 as higher...
Maxim Dubinin
07:26 AM Bug report #3744 (Closed): Different behavior for mapcanvas and layout with scale dependent rende...
1. Add attached layer
2. Change projection to EPSG:3395
3. Set scale dependent rendering to 0-2000000 (2mln)
4. En...
Maxim Dubinin
07:43 AM Bug report #3738: wms tiles does not work
Replying to [comment:7 jef]:
> Do you have a public wms-c to reproduce this with?
Sorry, not immediately.
We are us...
michele zanolli
04:29 AM Bug report #3738 (In Progress): wms tiles does not work
Jürgen Fischer
03:58 AM Bug report #3738: wms tiles does not work
Do you have a public wms-c to reproduce this with? Jürgen Fischer
03:44 AM Bug report #3738: wms tiles does not work
Replying to [comment:5 imincik1]:
> What projection do You use for that layer ?
EPSG:25832
luca76 -
03:06 AM Bug report #3738: wms tiles does not work
Replying to [comment:4 trapanator]:
> I made further tests. I discovered that in tilecache.cfg these resolutions work...
Ivan Mincik
02:51 AM Bug report #3738: wms tiles does not work
I made further tests. I discovered that in tilecache.cfg these resolutions works both in QGIS 1.6 and 1.7:... luca76 -
02:43 AM Bug report #3738: wms tiles does not work
Yes. Below you can see the log. The difference is that 1.6.0 sends 20 requests, while 1.7.0 32 requests.
This is th...
luca76 -
07:16 AM Bug report #3502 (Closed): Cache problems with QGIS server
Fixed with commit:466bf93b (SVN r15708) Marco Hugentobler
07:16 AM Bug report #3502 (Closed): Cache problems with QGIS server
Fixed with commit:466bf93b (SVN r15708) Marco Hugentobler
06:57 AM Bug report #3743 (Closed): [OsX] Georeferencer: can't set map coords from map canvas, and other o...
When adding a GCP (Add Point) in the georeferencer window, I can't set the map coordinates from the map canvas. From... William Kyngesburye
06:45 AM Bug report #3606 (Closed): Field calculator inserts real values to the attribute table instead of...
fixed in commit:98d612f2 (SVN r15707). Jürgen Fischer
06:45 AM Bug report #3606 (Closed): Field calculator inserts real values to the attribute table instead of...
fixed in commit:98d612f2 (SVN r15707). Jürgen Fischer
06:23 AM Bug report #3606 (In Progress): Field calculator inserts real values to the attribute table inste...
Jürgen Fischer
06:35 AM Feature request #3742 (Closed): Save extent after reprojection
Right now if you load a layer and change the project's projection to something else the layer dissapears as the view ... Maxim Dubinin
06:27 AM Bug report #3519 (Closed): Save buttons in raster properties dialog are not working
Fixed in commit:90c30d19 (SVN r15706) Alexander Bruy
06:27 AM Bug report #3519 (Closed): Save buttons in raster properties dialog are not working
Fixed in commit:90c30d19 (SVN r15706) Alexander Bruy
06:17 AM Bug report #3519 (Feedback): Save buttons in raster properties dialog are not working
the bug reappeared, SD is not stored again Maxim Dubinin
06:17 AM Bug report #3519 (Feedback): Save buttons in raster properties dialog are not working
the bug reappeared, SD is not stored again Maxim Dubinin
05:27 AM Bug report #3739 (Closed): WMS Transparency Rendering problem
Fixed in commit:880088c1 (SVN r15704) - Hello from Juergen & Tim in Lisbon! Tim Sutton
05:27 AM Bug report #3739 (Closed): WMS Transparency Rendering problem
Fixed in commit:880088c1 (SVN r15704) - Hello from Juergen & Tim in Lisbon! Tim Sutton
02:21 AM Bug report #3739 (Closed): WMS Transparency Rendering problem
Not sure if anyone has noticed but 1.7 does not allow transparency for a wms layer but this worked in 1.6. Is this i... kevthekelt -
04:32 AM Feature request #3734: WMS reprojection if current CRS is supported by server
might #3740 be a duplicate of this? Jürgen Fischer
04:30 AM Bug report #3655: Crash after resizing attribute table in dock window
Works for me on Ubuntu 10.10 Qt 4.7.0
Regards, Pete
Saber Razmjooei
04:14 AM Bug report #3698: kml import skipping lines
Hi there,
The KML file has 279 Placemark tags, all of which are imported into QGIS trunk without problems.
Are yo...
Saber Razmjooei
02:25 AM Bug report #3740 (Closed): WMS Rendering problem - jagged lines
I've noticed that 1.7 doesn't render wms properly. The line edges appear very jagged, 1.6 behaviour was nice, anti-al... kevthekelt -

2011-04-14

12:39 AM Bug report #3738: wms tiles does not work
Tested on Debian Lenny, KDE Desktop, QGIS trunk compiled few days ago, Tilecache, Mapserver. Without such problems.
...
Ivan Mincik
12:07 AM Bug report #3738: wms tiles does not work
see attachment:
above is Windows 1.7 build latest revision from osgeo, below is the latest 1.6.0 official binary.
S...
luca76 -
11:52 PM Bug report #3738 (Closed): wms tiles does not work
I have some WMS-C layers served from tilecache + mapserver.
If I open these layers with qgis 1.6 all is OK
If I ope...
michele zanolli
12:19 PM Feature request #3226: Patch to show number of features per class in legend
Replying to [comment:5 pcav]:
> Still true?
Hi Paolo,
I just saw your question after opening bug #3737.
Yes, there...
Mayeul Kauffmann
12:17 PM Bug report #3737: incorrect feature count with rule based renderer
see also #3226-3 Mayeul Kauffmann
12:00 PM Bug report #3737 (Closed): incorrect feature count with rule based renderer
The feature count does not work with the rule based renderer. Generally it shows 'r0'. Sometimes one symbol is (wrong... Mayeul Kauffmann
12:09 PM Bug report #3692 (Closed): QGIS segfaults after removing table join
Fixed in commit:f42443c9 (SVN r15701) Marco Hugentobler
12:09 PM Bug report #3692 (Closed): QGIS segfaults after removing table join
Fixed in commit:f42443c9 (SVN r15701) Marco Hugentobler
11:00 AM Bug report #3655: Crash after resizing attribute table in dock window
I wonder what was changed some one month ago, since until that time, there was no crashing. This is the reason I thin... Ivan Mincik
07:08 AM Bug report #3655: Crash after resizing attribute table in dock window
Thanks for testing,
it is crashing mostly on older Qt, but it is confirmed by Paolo also on Debian unstable (#3670) w...
Ivan Mincik
06:59 AM Bug report #3655: Crash after resizing attribute table in dock window
Ivan I tested on Ubuntu Natty (Qt 4.7.2) and was not able to replicate this issue. I will test with Ubuntu 10.10 / Ma... Tim Sutton
07:09 AM Bug report #3579 (Feedback): Crash after opening multiple attribute tables in dock window
The problem is still there. Please do not cancel GUI bugs reported on Linux after testing on Windows. Ivan Mincik
07:09 AM Bug report #3579 (Feedback): Crash after opening multiple attribute tables in dock window
The problem is still there. Please do not cancel GUI bugs reported on Linux after testing on Windows. Ivan Mincik
05:09 AM Bug report #3702: QGIS and gdalinfo shows different information about raster
Yes, I know, we are mapping gdal types to wider types to get space for null values.
Redmine Admin
05:06 AM Bug report #3694: WMS quality worse on QGIS server compared to QGIS desktop
The DPI bug was fixed in trunk commit:72ee7e6d (SVN r15700). Can you verify if this ticket was also fixed? Redmine Admin
04:46 AM Bug report #3736 (Closed): Repeated QgsGrassRasterProvider::identify slow
In the GRASS provider, I have followed the recommended use of GRASS in
applications, that means, if a value on certai...
Redmine Admin
04:24 AM Bug report #3735 (Closed): GDAL stats not used
I'm not sure if this behavior is expected or I am missing something.
I have a 1 band raster dataset (an elevation DE...
Redmine Admin
04:18 AM Feature request #3734: WMS reprojection if current CRS is supported by server
WMS driver does not automatically switches to
projection requested by QGIS even if it is supported by WMS server.
Y...
Redmine Admin
04:11 AM Feature request #3734 (Closed): WMS reprojection if current CRS is supported by server
There seems some resampling going on when requesting a CRS
which the server supports (with enabled OTF):
http://www....
Redmine Admin
04:11 AM Bug report #3733 (Closed): Dummy transparency and nodata values
Open any raster and go to Transparency tab in layer properties. There is a dummy (incorrect) nodata value and one lin... Alexander Bruy
04:07 AM Bug report #3732 (Closed): Statistics missing in metadata
In Metadata tab (Layer properties dialog) there is no raster
statistics even when it calculated.
Originally reported...
Redmine Admin
04:06 AM Bug report #3731 (Closed): Raster stats calculated twice
Applying a style to layer triggers statistic calculation. If I apply
one style and then another statistics calculates...
Redmine Admin
03:59 AM Bug report #3598: Histogram stretch to full TMS layer hangs Qgis
It has to be fixed in gdal provider. Redmine Admin
03:45 AM Bug report #3669 (Closed): GDAL Tools: rasterize overwrite existing raster without asking for con...
It does not ask, at least not in my case (GDAL 1.7). However, this is solved in GDAL 1.8, so I think we can close this. Paolo Cavallini
03:45 AM Bug report #3669 (Closed): GDAL Tools: rasterize overwrite existing raster without asking for con...
It does not ask, at least not in my case (GDAL 1.7). However, this is solved in GDAL 1.8, so I think we can close this. Paolo Cavallini
03:23 AM Feature request #3730 (Closed): Rotate point symbols according to underlying line
It would be good to add the possibility of rotating automagically point symbols to be placed in the direction of an u... Paolo Cavallini
02:02 AM Bug report #3729 (Closed): GdalTools - Virtual Raster Creation: File Path Character Limit
Duplicated ticket, see #3469. Giuseppe Sucameli
02:02 AM Bug report #3729 (Closed): GdalTools - Virtual Raster Creation: File Path Character Limit
Duplicated ticket, see #3469. Giuseppe Sucameli

2011-04-13

11:58 PM Bug report #3729 (Closed): GdalTools - Virtual Raster Creation: File Path Character Limit
If one wants to build a virtual raster with [[GdalTools]], there is a limit of 32767 characters for all of the input ... jeffm -
04:51 PM Feature request #3728 (Closed): WFS with Filter Encoding
Many WFS Server support some Filter Encoding options.
From a client implementation point of view its only adding a ...
Sfkeller -
03:31 PM Bug report #3340 (Closed): Raster clipper: shifted results
Done in commit:4d3cdeca (SVN r15699). Using translate instead of merge the corners of the extent are moved to pixels. Giuseppe Sucameli
03:31 PM Bug report #3340 (Closed): Raster clipper: shifted results
Done in commit:4d3cdeca (SVN r15699). Using translate instead of merge the corners of the extent are moved to pixels. Giuseppe Sucameli
03:18 PM Bug report #3662 (Closed): GDALTools: clipper does not overwrite existing output
Done in commit:4d3cdeca (SVN r15699), using translate tool instead of merge. Giuseppe Sucameli
03:18 PM Bug report #3662 (Closed): GDALTools: clipper does not overwrite existing output
Done in commit:4d3cdeca (SVN r15699), using translate tool instead of merge. Giuseppe Sucameli
03:17 PM Bug report #3663 (Closed): GDALTools: clipper should act on selected layer only, not all
Done in commit:4d3cdeca (SVN r15699), now Clipper works like the other tools by selecting the input file/layer. Giuseppe Sucameli
03:17 PM Bug report #3663 (Closed): GDALTools: clipper should act on selected layer only, not all
Done in commit:4d3cdeca (SVN r15699), now Clipper works like the other tools by selecting the input file/layer. Giuseppe Sucameli
01:03 PM Bug report #3527: Crash when removing layers from project
I could not make it crash myself with many vector layers (on Kubuntu 10.10), but I noticed the following, which may b... Mayeul Kauffmann
12:58 PM Feature request #3726: WMS Layer Order
doesn't commit:7b4e6998 (SVN r15682) already fix your issues? Jürgen Fischer
11:44 AM Feature request #3726 (Closed): WMS Layer Order
When connecting to a WMS, and selecting all available layers, it would be nice to be able to invert the layer order i... andskog -
12:44 PM Bug report #3727 (Closed): Features not represented with rule-based renderer still get labelled
With the rule-based renderer, it is possible to have sets of rules that do not represent some features: if some featu... Mayeul Kauffmann
05:45 AM Bug report #3679: eVis not working with point layers
Replying to [comment:6 geofff]:
> Hi,
> Same problem for me (windows 7, qgis 1.7.0 15695 )
> Evis works well with qgi...
geofff -
05:30 AM Bug report #3679: eVis not working with point layers
Hi,
Same problem for me (windows 7, qgis 1.7.0 15695 )
Evis works well with qgis 1.6 but not with 1.7.0 (from osgeo4w...
geofff -
04:06 AM Bug report #3725 (Closed): Offline Editing plugin issues on both Linux and Windows using trunk
I'm trying to work with the QGIS plugin "Offline Editing" because I need to "feed" a Postgres / [[PostGIS]] database ... elcuco -

2011-04-12

12:56 AM Bug report #3685: Editing with new symbology gives bad results
Yes it's good. Great job! LionelR -
12:22 AM Bug report #3685 (Closed): Editing with new symbology gives bad results
commit:b6299661 (SVN r15697) should fix the editing issue too. Marco Hugentobler
12:22 AM Bug report #3685 (Closed): Editing with new symbology gives bad results
commit:b6299661 (SVN r15697) should fix the editing issue too. Marco Hugentobler
08:19 AM Bug report #3685: Editing with new symbology gives bad results
Ah, you mean moving the point geometry (with the edit tool), not moving the label position. I fixed the move of the l... Marco Hugentobler
02:35 AM Bug report #3685 (Feedback): Editing with new symbology gives bad results
Not fixed with commit:919ae745 (SVN r15694), new labeling activated + on the fly projection give wrong editing result... LionelR -
02:35 AM Bug report #3685 (Feedback): Editing with new symbology gives bad results
Not fixed with commit:919ae745 (SVN r15694), new labeling activated + on the fly projection give wrong editing result... LionelR -
12:22 AM Feature request #3724: Direct the user to the format-specific documentation for "Creation Options"
> "Raster translate - creation options" is meant to be the title of the help dialogue
*Proposed* help dialogue
Alister Hood
12:21 AM Feature request #3724: Direct the user to the format-specific documentation for "Creation Options"
Sorry - I never seem to understand the formatting on here.
"Raster translate - creation options" is meant to be the ...
Alister Hood
12:18 AM Feature request #3724 (Closed): Direct the user to the format-specific documentation for "Creatio...
Some of the raster tools, such as translate, provide a "Creation Options" section (see the attached screenshot). It ... Alister Hood
09:37 PM Bug report #3723: Transparency settings are not applied from *.qml
Clickable link: [http://gis-lab.info/share/DR/transparency.7z] dr -
09:36 PM Bug report #3723 (Closed): Transparency settings are not applied from *.qml
Open raster layer and try apply external *.qml style file. Transparency setting are not applied. Rasterfile and *.qml... dr -
02:01 PM Bug report #3722 (Closed): sip error compiling on armv7l
Hi, while compiling latest trunk on ubuntu maverick armv7l I get:
[ 61%] Built target compile_python_files
[ 62%] G...
Alessandro Pasotti
10:20 AM Feature request #3721 (In Progress): save button in GUI of Attribute table
Jürgen Fischer
07:48 AM Feature request #3721 (Closed): save button in GUI of Attribute table
Hi!
When editing attributes in attribute table, it would be great to include a "Save Edits" button next to "Toggle ed...
elcuco -
05:27 AM Bug report #3719: qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
Filename as default title added in commit:8a31ca5d (SVN r15696) Marco Hugentobler
02:29 AM Bug report #3719: qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
The idea with a default title (filename without .qgs) sound great.
Untoftunately, there are no up-to-date docs. Ther...
Marco Hugentobler
05:20 AM Bug report #3720 (Closed): Geometryless tables cannot be saved.
fixed in commit:97b72c79 (SVN r15695). Jürgen Fischer
05:20 AM Bug report #3720 (Closed): Geometryless tables cannot be saved.
fixed in commit:97b72c79 (SVN r15695). Jürgen Fischer
04:30 AM Bug report #3720 (Closed): Geometryless tables cannot be saved.
It's not possible to save geometryless tables (e.g. from postgis) into a file. zicke -

2011-04-11

12:35 AM Bug report #3719: qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
Thank for the quick answer,
Yes, I meant the top-level layer, I did not set the project title (which was not require...
Alessandro Pasotti
12:09 PM Bug report #3719 (Closed): qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
Do you mean the toplevel layer? If yes, this is intended. There must be exactly one toplevel layer (because of the WM... Marco Hugentobler
12:09 PM Bug report #3719 (Closed): qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
Do you mean the toplevel layer? If yes, this is intended. There must be exactly one toplevel layer (because of the WM... Marco Hugentobler
10:57 AM Bug report #3719 (Closed): qgis_mapserv.fcgi empty (ghost) layer in GetCapabilities
I don't know if I'm doing something wrong, but it seems like an empty layer is added to [[GetCapabilities]].
See att...
Alessandro Pasotti
01:02 PM Bug report #3685 (Closed): Editing with new symbology gives bad results
Should be fixed with commit:54f33219 (SVN r15693). Please test and repoen if not. Marco Hugentobler
01:02 PM Bug report #3685 (Closed): Editing with new symbology gives bad results
Should be fixed with commit:54f33219 (SVN r15693). Please test and repoen if not. Marco Hugentobler
12:42 PM Bug report #3132: Field calculator cannot calculates area of polygon
Replying to [comment:11 borysiasty]:
> I can confirm. Creating integer as well as floating point fails.
For floating ...
Enrico Fiore
09:42 AM Feature request #3393: Help Contents not about using QGIS
Coming over from #3718 which was closed as duplicate of this one: I think it would already be a great start to have t... mlennert -
09:40 AM Feature request #3717 (Feedback): allow loading vector legend from text file
Replying to [comment:1 jef]:
> You can already save the layer symbology to .qml files.
I'm am conscious of that poss...
mlennert -
09:40 AM Feature request #3717 (Feedback): allow loading vector legend from text file
Replying to [comment:1 jef]:
> You can already save the layer symbology to .qml files.
I'm am conscious of that poss...
mlennert -
09:26 AM Feature request #3717: allow loading vector legend from text file
Replying to [comment:1 jef]:
> You can already save the layer symbology to .qml files.
that is, from the layer prope...
Jürgen Fischer
09:25 AM Feature request #3717 (Closed): allow loading vector legend from text file
You can already save the layer symbology to .qml files. Jürgen Fischer
09:25 AM Feature request #3717 (Closed): allow loading vector legend from text file
You can already save the layer symbology to .qml files. Jürgen Fischer
09:11 AM Feature request #3717 (Closed): allow loading vector legend from text file
It would be nice to be able to load a vector legend/style from a text file. This could include categorised, graduated... mlennert -
09:32 AM Feature request #3718 (Closed): provide browsable online manual
duplicate of #3393 Jürgen Fischer
09:32 AM Feature request #3718 (Closed): provide browsable online manual
duplicate of #3393 Jürgen Fischer
09:12 AM Feature request #3718 (Closed): provide browsable online manual
Sometimes it is a hassle to download the entire QGIS manual just to check for a little detail. It would be nice to ha... mlennert -
04:52 AM Bug report #2857: Automatically change tools and right menu issue
What raster did you open and what coordinate system did it have (or which one did QGIS detect)?
I guess it didn't ha...
Jürgen Fischer
04:46 AM Bug report #3712: Python console paste error
Confirmed on current Trunk, Debian Squeeze, Gnome.
When trying to override existing current string in console with s...
Ivan Mincik
04:39 AM Bug report #3669: GDAL Tools: rasterize overwrite existing raster without asking for confirmation
When you select the output file (by click on the Select button) the tool ask for confirmation if you select an existe... Giuseppe Sucameli

2011-04-10

01:18 AM Bug report #2857: Automatically change tools and right menu issue
As borysiasty said the first is a feature (right click on canvas switches to the previous non-zoom/non-pan tool).
Ab...
Giuseppe Sucameli
11:24 PM Bug report #2857 (In Progress): Automatically change tools and right menu issue
sunilkcube -
12:32 AM Bug report #3155: Zoom to layer works incorrectly while layer editing
Replying to [comment:5 sunilkcube]:
> The comment from Jef tells that calculating extents while editing is quite exp...
Borys Jurgiel
12:26 AM Bug report #3155: Zoom to layer works incorrectly while layer editing
Replying to [comment:4 borysiasty]:
> What about recalculating the extent when the "zoom to layer" pressed (only if t...
sunilkcube -
01:38 PM Feature request #3716 (In Progress): value relation attribute editor
Jürgen Fischer
01:37 PM Feature request #3716 (Closed): value relation attribute editor
patch to add a value relation attribute widget, that offers values from a related table in a combobox - to apply afte... Jürgen Fischer
05:01 AM Bug report #3715 (Closed): GdalTools' pyramids in batch mode remove source files
If I run gdaladdo in batch mode, it deletes all the source files. The same in the read-only mode, only overlay files ... Borys Jurgiel

2011-04-09

01:38 PM Bug report #3057 (Closed): Attribute Index out of sync with data source when datasource was modif...
fixed in commit:fb438557 (SVN r15688). Jürgen Fischer
01:38 PM Bug report #3057 (Closed): Attribute Index out of sync with data source when datasource was modif...
fixed in commit:fb438557 (SVN r15688). Jürgen Fischer
11:14 AM Bug report #3714 (Closed): Qt arguments are not supported
QApplication is able to parse some useful command line arguments such as -style, -stylesheet, -session or -graphicssy... Martin Dobias
05:50 AM Bug report #3713: Memory layer's fields not shown in attribute table (and layer properties) unles...
Yes, but most plugins used to be compatible with older versions.
Btw. a few paragraphs later you give an example th...
Borys Jurgiel
05:37 AM Bug report #3713: Memory layer's fields not shown in attribute table (and layer properties) unles...
Borys: even better solution (though available only from 1.7) is to specify the fields when creating the layer, see: h... Martin Dobias
02:51 AM Bug report #3713 (Closed): Memory layer's fields not shown in attribute table (and layer properti...
Ok, it's reasonable. I'll call authors of affected plugins to encapsulate edits in editing mode. Borys Jurgiel
02:51 AM Bug report #3713 (Closed): Memory layer's fields not shown in attribute table (and layer properti...
Ok, it's reasonable. I'll call authors of affected plugins to encapsulate edits in editing mode. Borys Jurgiel
02:09 AM Bug report #3048 (Closed): Seg-fault on Debian Squeeze invoking any of GdalTools
I am closing it pending confirmation. Paolo Cavallini
02:09 AM Bug report #3048 (Closed): Seg-fault on Debian Squeeze invoking any of GdalTools
I am closing it pending confirmation. Paolo Cavallini

2011-04-08

04:33 PM Bug report #3713: Memory layer's fields not shown in attribute table (and layer properties) unles...
Replying to "borysiasty":/issues/show/3713:
> Please note in the python console I can see the fields and attributes.
...
Jürgen Fischer
03:12 PM Bug report #3713 (Closed): Memory layer's fields not shown in attribute table (and layer properti...
If I add a memory layer, it contains features with geometries, but seems the layer doesn't contain any field. In the ... Borys Jurgiel
02:49 PM Bug report #3712 (Closed): Python console paste error
If I try to paste from clipboard between two words in the console, it always goes to the end of the line. Borys Jurgiel
02:39 AM Feature request #3710: SPIT: allow appending data to existing table
Hi Duarte,
Postgis Manager allows to append data. Furthermore I believe that SPIT will be discontinued the moment th...
Giovanni Manghi

2011-04-07

11:45 AM Feature request #3711 (Open): Conflation tool for points
I'm interested in conflating points from two datasets, as I've asked "on this GIS.StackExchange.com question":http://... joshdoe -
09:39 AM Feature request #3710 (Closed): SPIT: allow appending data to existing table
Using SPIT to load data to [[PostGIS]] is easy and user friendly. You can make a list of shapefiles to load in one go... Duarte Carreira
08:55 AM Bug report #3709 (Closed): Spatialite editing not working
Spatialite editing not working on qgis trunk, just for lines and polygons.
Not saving new features or editing old, c...
ulmi -
05:03 AM Bug report #3708: Load SOSI files in QGIS 1.7 with GDAL 1.8
SOSI support does not work out-of-the-box. As underlined in http://gdal.org/ogr/ogr_formats.html , you need to compil... Even Rouault
04:37 AM Bug report #3708 (Closed): Load SOSI files in QGIS 1.7 with GDAL 1.8
I have installed the QGIS 1.7 (installed 20.03.2011) with GDAL 1.8 which is announced to support SOSI import. Afte... hborch -
04:37 AM Feature request #3704: Shapefile: please improve column management
Done: https://trac.osgeo.org/qgis/ticket/3707
Ciao!
Carlo
Stemby -
04:33 AM Feature request #3707 (Closed): Deleting Shapefile columns
A short explanation of the current workaround. Stemby -
03:08 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Replying to [comment:5 wonder]:
>Using layers from [[QgsMapLayerRegistry]] for zoom full functionality may not alway...
sunilkcube -

2011-04-06

10:33 PM Bug report #3607: GDALTools: Inconsistent behaviour on windows standalone in QGIS 1.6
I didn't test on enough machines to see patterns :( Alister Hood
10:31 PM Bug report #3607: GDALTools: Inconsistent behaviour on windows standalone in QGIS 1.6
I wouldn't rule that out.
I've only got a small set of computers to compare with (see above), and all but mine are s...
ramon .
08:46 PM Bug report #3607: GDALTools: Inconsistent behaviour on windows standalone in QGIS 1.6
> Seems to work for osgeo both 1.6 and 1.7
Ah, OK.
We had what seemed to be the same problem with the osgeo 1.5 and ...
Alister Hood
08:42 PM Bug report #3607: GDALTools: Inconsistent behaviour on windows standalone in QGIS 1.6
Yes. Seems to work for osgeo both 1.6 and 1.7.
The problem was with the standalone install.
The standalone version ...
ramon .
08:13 PM Bug report #3607: GDALTools: Inconsistent behaviour on windows standalone in QGIS 1.6
Does this occur with the osgeo nightly builds?
We had the same problem previously, but not now that we are running ni...
Alister Hood
05:37 PM Feature request #3222: Fast, easy and beautiful on the fly rule-based rendering of OSM maps
This patch http://trac.osgeo.org/qgis/attachment/ticket/3222/patch_on_r15676-rbr_symbol-levels_reordering_1st-rule_bu... Mayeul Kauffmann
04:38 PM Bug report #3479 (Feedback): New Symbology does not print
Hi,
I think it is only partly solved (tested on commit:f173c42a (SVN r15673) and commit:b8f83497 (SVN r15677)).
Now t...
Mayeul Kauffmann
04:38 PM Bug report #3479 (Feedback): New Symbology does not print
Hi,
I think it is only partly solved (tested on commit:f173c42a (SVN r15673) and commit:b8f83497 (SVN r15677)).
Now t...
Mayeul Kauffmann
03:31 PM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
The patch from http://trac.osgeo.org/qgis/ticket/3136 have also been reverted by this update from gdal. Can we re-app... Jeremy Palmer
06:57 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
Replying to [comment:7 pcav]:
> So the fake codes 40000 and 40001 are now duplicates, and should be
> removed. 40002 ...
Jürgen Fischer
05:09 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
Now EPSG:3003 is defined in QGIS as:... Paolo Cavallini
01:34 PM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
Replying to [comment:7 lutra]:
>
> I attach another vector that show the same "symptoms".
tested the urbano-shapefi...
hellik -
10:48 AM Feature request #3704: Shapefile: please improve column management
Replying to [comment:3 Stemby]:
> Ok, thank you.
>
> I think your clear explication would be useful if inserted in t...
Giovanni Manghi
07:32 AM Feature request #3704: Shapefile: please improve column management
Ok, thank you.
I think your clear explication would be useful if inserted in the manual.
Regards,
Carlo
Stemby -
02:20 AM Feature request #3704: Shapefile: please improve column management
duplicate of #1446 Jürgen Fischer
10:02 AM Bug report #3679: eVis not working with point layers
Tried again with rev 15676 and the previously uploaded project file.
Select point layer, select eVis event ID tool, ...
Donkagen2 -
05:14 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Replying to [comment:4 sunilkcube]:
> Then I have created a patch for that design. Can you kindly have a look on it a...
Martin Dobias
03:41 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
Replying to [comment:3 pcav]:
Thank you for your opinion.
>IMHO yes, also according to the principle of least...
sunilkcube -
03:33 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
IMHO yes, also according to the principle of least surprise. Paolo Cavallini
03:28 AM Feature request #3697: Add option "Zoom to full extent including invisible layers"
The Layers available only in Mapcanvas are used to calculate Full Extent not all the layers present in the Maplayerre... sunilkcube -
05:10 AM Feature request #3706: improve loading of qml to load source layer
I'll do all I can to be there! Hoping one of the gurus will pick this up!
Duarte
Replying to [comment:1 lutra]:
> H...
Duarte Carreira
04:55 AM Feature request #3706: improve loading of qml to load source layer
Hi Duarte, let's come to the dev meeting in Lisbon to propose and hack this enhancement! ;)
abraços
Giovanni Manghi
04:51 AM Feature request #3706 (Closed): improve loading of qml to load source layer
This is an improvement to allow QGIS to load pre-symbolized layers, in one step, data source and symbology. This is d... Duarte Carreira
04:06 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
I used db.connect, moving to SQLite, but I no joy Paolo Cavallini
03:36 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
Replying to [comment:9 marisn]:
> > There where some cleanups in DBF area, that was a source of such crashes.
> > Pl...
hamish -
02:42 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...

> There where some cleanups in DBF area, that was a source of such crashes. Please test with current SVN.
the fix...
Giovanni Manghi
02:37 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...

> and/or, to test that theory, try using db.connect to swap to SQLite as the DB backend instead of DBF.
>
test do...
Giovanni Manghi

2011-04-05

01:46 AM Bug report #3603: r.colors has no effect on GRASS rasters (after the merge of the rasters branch)
Furthermore, new layers will have a greyscale istead of appropriate color, as it happened before Paolo Cavallini
01:28 AM Bug report #3705 (Closed): Graduated symbol style not loaded correctly
1. load a shp
1. apply a graduated symbol style (old symbology), e.g. based on area
1. save the style with the sam...
Paolo Cavallini
11:36 AM Feature request #3704 (Closed): Shapefile: please improve column management
Shapefiles columns can be added without any obstacle in many ways: trough the attributes table itself, trough the vec... Giovanni Manghi
11:36 AM Feature request #3704 (Closed): Shapefile: please improve column management
Shapefiles columns can be added without any obstacle in many ways: trough the attributes table itself, trough the vec... Giovanni Manghi
11:08 AM Feature request #3704 (Closed): Shapefile: please improve column management
From the manual, section 3.4.7. "Attributes Tab":
"At the moment only columns from [[PostGIS]] layers can be removed...
Stemby -
09:11 AM Feature request #3701 (Closed): eVis: can't create layer from MS Access query
Applied in commit:b8f83497 (SVN r15677) Alexander Bruy
09:11 AM Feature request #3701 (Closed): eVis: can't create layer from MS Access query
Applied in commit:b8f83497 (SVN r15677) Alexander Bruy
02:41 AM Feature request #3697 (In Progress): Add option "Zoom to full extent including invisible layers"
sunilkcube -

2011-04-04

11:19 PM Feature request #3703 (Open): improvement of spatial selection
basically something similar to [[ArcGis]] 'select by location', where you
are able to:
1. select features in multiple...
jannekevandijk -
09:58 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
mhugent, I've tried with latest PPA and confirm workaround is working.
Since there was an agreement among developers...
Mathieu Pellerin - nIRV
11:11 AM Bug report #3702 (Closed): QGIS and gdalinfo shows different information about raster
gdalinfo shows the following information about raster:... dr -
10:44 AM Feature request #3701 (Closed): eVis: can't create layer from MS Access query
eVis throws error when trying create layer from SQL query. To reproduce:
1. create connection to the database
2. c...
Alexander Bruy
08:50 AM Feature request #2807: Font symbols for fill patterns in polygons
This an enhancement that would still be valuable for QGIS. Because there are many symbol fonts available, e.g., http:... John Tull
08:22 AM Bug report #3700 (Closed): SVG Patterns: rotated patterns do not scale well during printing
commit:f173c42a (SVN r15673) should fix this. Could you test and reopen if not? Marco Hugentobler
08:22 AM Bug report #3700 (Closed): SVG Patterns: rotated patterns do not scale well during printing
commit:f173c42a (SVN r15673) should fix this. Could you test and reopen if not? Marco Hugentobler
07:20 AM Bug report #3700: SVG Patterns: rotated patterns do not scale well during printing
a non-rotated SVG pattern scales fine Andreas Neumann
07:18 AM Bug report #3700 (Closed): SVG Patterns: rotated patterns do not scale well during printing
If one rotates an SVG pattern fill, the resulting printout does not scale properly, if the pattern is rotated. Andreas Neumann
03:54 AM Bug report #3685: Editing with new symbology gives bad results
Maybe this is a problem of the 'move label' tool Marco Hugentobler

2011-04-03

12:21 AM Bug report #3685: Editing with new symbology gives bad results
Oups I'm confused, it's not with the new symbology but with the new labeling engine :/
Steps :
1- activate "on the fl...
LionelR -
11:29 PM Bug report #3672: region error when creating a GRASS location?
In QGIS we used a different approach: we defined additional ad hoc projections (e.g. code 40000) with the additional ... Paolo Cavallini
10:07 AM Bug report #3672: region error when creating a GRASS location?
Here the test with 3763:... Markus Neteler
05:26 AM Bug report #3672: region error when creating a GRASS location?
The same applies, for example, for epsg 3763? Giovanni Manghi
05:24 AM Bug report #3672: region error when creating a GRASS location?
The reason will be that several datums are associated to EPSG 3003:... Markus Neteler
01:35 PM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
Replying to [comment:9 marisn]:
> There where some cleanups in DBF area, that was a source of such crashes.
> Please ...
hamish -
12:54 PM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
Replying to [comment:7 lutra]:
> By the way as for v.in.ogr when it crashes it does after having completed correctly ...
marisn -
09:30 AM Bug report #3604: paste doesn't convert geometry or give error on incompatible geometry
Definitely something with copying _from_ a shapefile _to_ postgis. I converted the shapefile to a multipolygon postg... William Kyngesburye
04:30 AM Bug report #3602: QGIS OSGEO4W crashes while creating a new GRASS mapset on both 1.6 and trunk
Please backport this to QGIS 1.6. Markus Neteler

2011-04-02

12:49 AM Bug report #3685: Editing with new symbology gives bad results
I cannot replicate the issue. Are you really sure it is a problem with new symbology (i.e. does it work correctly wit... Martin Dobias

2011-04-01

06:54 AM Bug report #3699: silent plugin loading failure
Just to give some more context: the plugin which is failing to load for me is grass, whose .so fails to find a few de... Sandro Santilli
06:52 AM Bug report #3699 (Closed): silent plugin loading failure
I've noticed that when a core plugin loading fails qgis doesn't say anything, unless you build it in Debug mode.
It'...
Sandro Santilli
04:26 AM Feature request #3430: fill pattern missing for point markers in new symbology engine
The patch has been added above. Can anyone please kindly review the patch and if you have any comments let me know ... sunilkcube -
04:12 AM Bug report #3688 (Closed): New raster implementation: interactive transparency selection does not...
fix in commit:297475f8 (SVN r15657)
I delete [[QgsPixelSelectorTool]] and use [[QgsMapToolEmit]].
Sergey Yakushev
04:12 AM Bug report #3688 (Closed): New raster implementation: interactive transparency selection does not...
fix in commit:297475f8 (SVN r15657)
I delete [[QgsPixelSelectorTool]] and use [[QgsMapToolEmit]].
Sergey Yakushev

2011-03-31

01:37 AM Bug report #3696: classification keeps remembering a removed feature class
Replying to [comment:2 rduivenvoorde]:
> running commit:4f143c0c (SVN r15652) trunk here on ubuntu: still this proble...
Richard Duivenvoorde
01:30 AM Bug report #3696: classification keeps remembering a removed feature class
running commit:4f143c0c (SVN r15652) trunk here on ubuntu: still this problem
One thing: after saving the shapefile ...
Richard Duivenvoorde
12:55 PM Bug report #3696: classification keeps remembering a removed feature class
From a quick test with new symbology, this seems to work ok with current trunk. Marco Hugentobler
09:30 AM Bug report #3696 (Closed): classification keeps remembering a removed feature class
when using unique classification, the removal of features from a certain class makes this class NOT go away when you ... Richard Duivenvoorde
11:22 PM Bug report #3698 (Closed): kml import skipping lines
I am using quantum gis v1.6.0 on ubuntu 10.04 kernel v2.6.32-30 generic.

Import of a google earth file (kml) is inc...
1168 -
10:08 AM Feature request #3697 (Open): Add option "Zoom to full extent including invisible layers"
Zoom to full extent should zoom to the full extent of all loaded layers (as most popular packages do), not only to th... Paolo Cavallini
06:17 AM Bug report #3695 (Closed): Layers not shown correctly in layout
Google layers come at fixed scale levels. The print composer can't handle (for now) correctly those levels, so you ha... Giovanni Manghi
06:17 AM Bug report #3695 (Closed): Layers not shown correctly in layout
Google layers come at fixed scale levels. The print composer can't handle (for now) correctly those levels, so you ha... Giovanni Manghi
06:07 AM Bug report #3695 (Closed): Layers not shown correctly in layout
I added two layers in Qgis (Project CRS Google Mercator):
1. Google Physical
2. Shapefile with polygon (CRS: Amersf...
carlob -
05:30 AM Bug report #3694: WMS quality worse on QGIS server compared to QGIS desktop
Here is a Screenshot: on the left is the better quality of QGIS desktop, on the right the lower quality of QGIS serve... Andreas Neumann
05:18 AM Bug report #3694 (Closed): WMS quality worse on QGIS server compared to QGIS desktop
Since a couple days/weeks it seems like the display quality of WMS, when used through QGIS server got substantially w... Andreas Neumann
04:48 AM Bug report #3692: QGIS segfaults after removing table join
I can reproduce the bug with QGIS commit:5a27a813 (SVN r15649), Fedora 14, a shapefile and a DBF table.
I also tried...
Anne Ghisla
02:31 AM Feature request #480: clip based on extent of other dataset(s)
This ticket is same as
#3066 [[GdalTools]]: clipping based on a shapefile mask - since the effort of [[TeamQGIS...
Bill Williamson
02:30 AM Feature request #3066: GdalTools: clipping based on a shapefile mask
I want to add it to the Clipper tool, so it can be used to clip whatever kind of layer. Giuseppe Sucameli
02:23 AM Feature request #3066: GdalTools: clipping based on a shapefile mask
Works for me in Win7 in trunk
use cutline in gdalwarp.
Why is ticket still open?
Bill Williamson

2011-03-30

01:12 AM Bug report #3689 (Closed): New raster implementation: identify tool not working on reprojected ra...
Fixed in commit:6a7b6a29 (SVN r15648) Sergey Yakushev
01:12 AM Bug report #3689 (Closed): New raster implementation: identify tool not working on reprojected ra...
Fixed in commit:6a7b6a29 (SVN r15648) Sergey Yakushev
12:56 AM Bug report #3690: Language Settings of Standard buttons on de_CH
I confirm this behaviour for fr_FR, it's still present in trunk. I remenber that a while ago some qt*.ts have been de... Jean-Roc Morreale
04:24 AM Bug report #3690 (Closed): Language Settings of Standard buttons on de_CH
Since version 1.6 the language settings for the standard buttons are not respected for de_CH (e.g. "Abbrechen" instea... peppo -
12:45 AM Bug report #2230: Vertex markers are displayed in Print Composer
Confirme bug in trunk commit:48900197 (SVN r15611) on Linux. dr -
11:47 PM Bug report #3155: Zoom to layer works incorrectly while layer editing
What about recalculating the extent when the "zoom to layer" pressed (only if the layer is dirty). Borys Jurgiel
11:25 PM Feature request #3430 (In Progress): fill pattern missing for point markers in new symbology engine
sunilkcube -
02:42 PM Bug report #3692: QGIS segfaults after removing table join
Replying to [comment:2 mhugent]:
> > query the layer
>
> Do you mean with an expression in the attribute table query...
Luca Delucchi
01:20 PM Bug report #3692: QGIS segfaults after removing table join
> query the layer
Do you mean with an expression in the attribute table query builder? Or with the infotool in the map?
Marco Hugentobler
06:25 AM Bug report #3692 (Closed): QGIS segfaults after removing table join
QGIS segfaults after removing table join and query the layer that was joined.
Steps to reproduce it:
- add vector
...
Luca Delucchi
08:57 AM Bug report #3693 (Closed): Major system-wide crash on Composer when paper-size option is clicked.
All my Ubuntu 10.10 64bit crashes when I click on the paper-size (General tab) [[ComboListBox]] to adjust the paper s... Thaddeus -
04:38 AM Feature request #3691 (Open): Drag & drop of layers between qgis instances
It would be nice to use drag&drop Layers between different instances of qgis. When I have a layer with a style in som... peppo -
03:26 AM Bug report #2861: new symbology: (overall) transparency slider missing for categorized/graduated ...

> About global transparency, can't you just concatenate transparencies ?
> 50% of transparency on the symbol * 50% o...
Giovanni Manghi
03:21 AM Bug report #2861: new symbology: (overall) transparency slider missing for categorized/graduated ...
Oh yes, I see it now. And you have to hit "classify" again too, which changes the colors if youre using random color ... Sandro Santilli
02:30 AM Bug report #3550 (Closed): Labels scale dependency not saved
sunilkcube -
02:30 AM Bug report #3550 (Feedback): Labels scale dependency not saved
sunilkcube -
02:29 AM Bug report #3550 (Closed): Labels scale dependency not saved
Replying to "andskog":/issues/show/3550:
it is working for me. Can anyone conform this bug , if so can you list the s...
sunilkcube -
02:29 AM Bug report #3550 (Closed): Labels scale dependency not saved
Replying to "andskog":/issues/show/3550:
it is working for me. Can anyone conform this bug , if so can you list the s...
sunilkcube -

2011-03-29

01:52 AM Bug report #2861: new symbology: (overall) transparency slider missing for categorized/graduated ...
It should be possible to set the transparency for the source symbol - the same transparency should be applied for eac... Martin Dobias
01:49 PM Bug report #2861: new symbology: (overall) transparency slider missing for categorized/graduated ...
subscribing to the issue, I'm missing the slider too Sandro Santilli
01:23 AM Bug report #3689 (Closed): New raster implementation: identify tool not working on reprojected ra...
Identify does not work on the attached image when using OTFP. To replicate:
- load the raster
- set project projecti...
Tim Sutton
01:19 AM Bug report #3688 (Closed): New raster implementation: interactive transparency selection does not...
Using Radmin's overhauled raster implementation:
- load a raster
- open properties
- transparency tab
- click 'add v...
Tim Sutton
09:17 PM Bug report #3550 (In Progress): Labels scale dependency not saved
sunilkcube -
10:40 AM Feature request #3187: transform ring into new polygon
Replying to [comment:8 lutra]:
> Replying to [comment:7 mlennert]:
> > Replying to [comment:6 p0cisk]:
> > > Hi
> > >...
mlennert -
10:03 AM Feature request #3187: transform ring into new polygon
Replying to [comment:7 mlennert]:
> Replying to [comment:6 p0cisk]:
> > Hi
> > Try to use plugin 'Ringer' from QGIS C...
Giovanni Manghi
09:47 AM Feature request #3187: transform ring into new polygon
Replying to [comment:6 p0cisk]:
> Hi
> Try to use plugin 'Ringer' from QGIS Contributed Repository (experimental).
> ...
mlennert -
08:50 AM Feature request #3187 (Closed): transform ring into new polygon
Hi
Try to use plugin 'Ringer' from QGIS Contributed Repository (experimental).
Select polygons to transform there rin...
Piotr Pociask
08:50 AM Feature request #3187 (Closed): transform ring into new polygon
Hi
Try to use plugin 'Ringer' from QGIS Contributed Repository (experimental).
Select polygons to transform there rin...
Piotr Pociask
10:35 AM Bug report #3687 (Closed): Unable to export large / high resolution / detailed scale maps
From Print Composer:
1. Change Quality 300 dpi to 500 or 600 for example.
2. Export to Image... (png) OR Export to P...
bderstine -
10:25 AM Bug report #3643: wrong direction of label direction symbol
Great. I confirm the fix. You can close the grave now :) Sandro Santilli
08:52 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Applied the second version in commit:9a167ba0 (SVN r15638). Thanks! Marco Hugentobler
08:52 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Applied the second version in commit:9a167ba0 (SVN r15638). Thanks! Marco Hugentobler
06:26 AM Bug report #3643: wrong direction of label direction symbol
Even smaller is just moving re-adding the equal sign but to the right part:... Sandro Santilli
05:59 AM Bug report #3643: wrong direction of label direction symbol
A slightly more elegant version:... Sandro Santilli
05:54 AM Bug report #3643: wrong direction of label direction symbol
The attached patch (bug3643.diff) fixes it for me, for both datasets.
Might not be extremely elegant, but should be a...
Sandro Santilli
05:27 AM Bug report #3643: wrong direction of label direction symbol
I'd add that the original testcase only contained lines oriented from bottom up, which may explain why this case wasn... Sandro Santilli
05:26 AM Bug report #3643: wrong direction of label direction symbol
In particular, edges with id 5 and 7 of qgisbug3543_1.zip are disagreed upon between label and line decoration. They ... Sandro Santilli
05:20 AM Bug report #3643 (Feedback): wrong direction of label direction symbol
Indeed commit:76d0e28d (SVN r15592) fixed the attached edge.zip case, but it's still wrong for another dataset :/
I'm...
Sandro Santilli
05:20 AM Bug report #3643 (Feedback): wrong direction of label direction symbol
Indeed commit:76d0e28d (SVN r15592) fixed the attached edge.zip case, but it's still wrong for another dataset :/
I'm...
Sandro Santilli
09:48 AM Bug report #3663: GDALTools: clipper should act on selected layer only, not all
Looking better, it shouldn't affect strings as I have to remove that option (and the related string), isn't it? Giuseppe Sucameli
09:38 AM Bug report #3663: GDALTools: clipper should act on selected layer only, not all
I think it is better to interrupt the string freeze than keeping a known, fixable bug. Opinions? Paolo Cavallini
09:08 AM Bug report #3663: GDALTools: clipper should act on selected layer only, not all
Replying to [comment:2 pcav]:
> It does not appear to be the case: ... commit:1e6c0951 (SVN r15578)
I meant it exclud...
Giuseppe Sucameli
07:32 AM Bug report #3686: infinite loop
Eh, not easy to reproduce. I was checking postgis tables, very simple shapes from example topologies. It could be the... Sandro Santilli
07:17 AM Bug report #3686: infinite loop
Could you please post a sample shapefile that exhibits this behavior?
Isn't that a polygon layer with very complex s...
Martin Dobias
05:37 AM Bug report #3686: infinite loop
Oh, here's some more, in the screen buffer:... Sandro Santilli
05:36 AM Bug report #3686 (Closed): infinite loop
I got qgis 1.7.0 enter an infinite loop in main gui.
Attached gdb and saw it being in pal::LabelPosition::getCost(), ...
Sandro Santilli
07:03 AM Bug report #3604: paste doesn't convert geometry or give error on incompatible geometry
Now at least copying from a similar postgis multipolygon layer seems to be working. Still can't copy from the shapef... William Kyngesburye
03:51 AM Bug report #3679: eVis not working with point layers
Replying to [comment:3 lutra]:
> Replying to [comment:2 Donkagen2]:
> > Replying to [comment:1 billywill]:
> > > Work...
Donkagen2 -
03:12 AM Bug report #3679: eVis not working with point layers
Replying to [comment:2 Donkagen2]:
> Replying to [comment:1 billywill]:
> > Works for me
> > Win7 rev 15622
> Just tr...
Giovanni Manghi
03:11 AM Bug report #3679 (Feedback): eVis not working with point layers
Replying to [comment:1 billywill]:
> Works for me
> Win7 rev 15622
Just tried it again with XP (SP3) rev 15622 and it...
Donkagen2 -
03:11 AM Bug report #3679 (Feedback): eVis not working with point layers
Replying to [comment:1 billywill]:
> Works for me
> Win7 rev 15622
Just tried it again with XP (SP3) rev 15622 and it...
Donkagen2 -
02:36 AM Bug report #3679 (Closed): eVis not working with point layers
Works for me
Win7 rev 15622
Bill Williamson
02:36 AM Bug report #3679 (Closed): eVis not working with point layers
Works for me
Win7 rev 15622
Bill Williamson

2011-03-28

12:41 AM Bug report #3685 (Closed): Editing with new symbology gives bad results
This problem affects QGIS 1.6 & 1.7 with "On the fly" activated.
Editing a point vector with new symbology activated,...
LionelR -
02:29 PM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
it is really unpredictable. Sometimes seems to work overall in a acceptable way, other times is very unstable/fragile... Giovanni Manghi
02:02 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...

> really weird. I have also updated qgis-trunk to 1.7.0-100 and now it seems that this problem become really rare. I...
Giovanni Manghi
02:20 PM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
I played around a bit more: the attached vector is always imported with no problems if I use the qgis/GRASS shell or ... Giovanni Manghi
01:25 PM Bug report #3684 (Closed): Categorized renderer can't handle trailing spaces
Trailing spaces are ignored/truncated by the classification. Then, the renderer can't find the truncated values. Deb... Anita Graser
11:01 AM Bug report #2003 (Closed): crash when refreshing layer list if this contains unclean vectors
I don't know what is changed in qgis trunk/osgeo4w in the last week, but a few days ago an unclean vector caused qgis... Giovanni Manghi
11:01 AM Bug report #2003 (Closed): crash when refreshing layer list if this contains unclean vectors
I don't know what is changed in qgis trunk/osgeo4w in the last week, but a few days ago an unclean vector caused qgis... Giovanni Manghi
07:53 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
jef, kudos for http://trac.osgeo.org/qgis/changeset/15617 Mathieu Pellerin - nIRV

2011-03-27

01:49 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...

> I've imported freguesias.shp several times by v.in.ogr in the same qgis-grass-session and several times in differe...
Giovanni Manghi
10:59 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
tested with osgeo4w-qgis-trunk (1.7.0-100) and the attached shapefile.
>
> *) importing a vector (shapefile) with v....
hellik -
11:42 PM Bug report #3655 (Feedback): Crash after resizing attribute table in dock window
The problem is still there.
Please do not cancel GUI bugs reported on Linux (with specific Qt version) after testing ...
Ivan Mincik
11:42 PM Bug report #3655 (Feedback): Crash after resizing attribute table in dock window
The problem is still there.
Please do not cancel GUI bugs reported on Linux (with specific Qt version) after testing ...
Ivan Mincik
10:25 PM Bug report #3655 (Closed): Crash after resizing attribute table in dock window
Could not reproduce.
Latest trunk on Win7.
Bill Williamson
10:25 PM Bug report #3655 (Closed): Crash after resizing attribute table in dock window
Could not reproduce.
Latest trunk on Win7.
Bill Williamson
10:32 PM Bug report #3579 (Closed): Crash after opening multiple attribute tables in dock window
Could not reproduce.
Win 7 Latest trunk
Bill Williamson
10:32 PM Bug report #3579 (Closed): Crash after opening multiple attribute tables in dock window
Could not reproduce.
Win 7 Latest trunk
Bill Williamson
10:15 PM Bug report #2942 (Closed): Maximizing window crashes on winXP
Cannot reproduce in Win7 with latest trunk (get a new computer...).
I did get behaviour of the overview not display...
Bill Williamson
10:15 PM Bug report #2942 (Closed): Maximizing window crashes on winXP
Cannot reproduce in Win7 with latest trunk (get a new computer...).
I did get behaviour of the overview not display...
Bill Williamson
10:07 PM Bug report #3675 (Closed): Rasters in Win7 crashing
Tried this again in latest trunk, no problems.
Trunk 15622.
Bill Williamson
10:07 PM Bug report #3675 (Closed): Rasters in Win7 crashing
Tried this again in latest trunk, no problems.
Trunk 15622.
Bill Williamson
08:36 PM Feature request #3683 (Open): Composer legend items inherit label font settings
It would be nice for items in the composer legend to inherit the font properties that are used in the map canvas. Thi... John Tull
10:57 AM Bug report #3681 (Closed): Size and rotation field crash Qgis with incomplete classified layer
Fixed in commit:08428f0f (SVN r15621) Martin Dobias
10:57 AM Bug report #3681 (Closed): Size and rotation field crash Qgis with incomplete classified layer
Fixed in commit:08428f0f (SVN r15621) Martin Dobias
10:49 AM Bug report #3672: region error when creating a GRASS location?
FYI
creating the location (ex. epsg 3763) with wingrass (6.4.0) returns the expected g.region result...
Giovanni Manghi
10:31 AM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...

> also here the import by v.in.ogr works.
it still fail for me with osgeo4w/qgis trunk...
Giovanni Manghi
09:29 AM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
Replying to [comment:4 hellik]:
>
> I'll try also with osge4w-qgis.
I've tested this also now with osge4w-qgis-trun...
hellik -
09:06 AM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
Replying to [comment:3 lutra]:
> Replying to [comment:2 neteler]:
> > Is the GRASS version you are using sufficiently...
hellik -
08:39 AM Bug report #3682 (Closed): Delimited Text Layer Plugin and empty columns
the problem were the quoted column names. Fixed in commit:e2de267b (SVN r15615). Jürgen Fischer
08:39 AM Bug report #3682 (Closed): Delimited Text Layer Plugin and empty columns
the problem were the quoted column names. Fixed in commit:e2de267b (SVN r15615). Jürgen Fischer
05:04 AM Bug report #3682: Delimited Text Layer Plugin and empty columns
I should have said I'm trying on Trunk. Removing the trailing tabs does not help on Trunk. Just replacing them with p... Volker Fröhlich
04:50 AM Bug report #3682: Delimited Text Layer Plugin and empty columns
Let's skip or correct this line 37. I have added the new version of the problematic file.
The problem is not in TAB ...
zirneklitis -
04:10 AM Bug report #3682: Delimited Text Layer Plugin and empty columns
That's not a problem of tabs at the end of lines, it doesn't seem to work with tabs at all. Substituting all tabs wit... Volker Fröhlich
03:51 AM Bug report #3682 (Closed): Delimited Text Layer Plugin and empty columns
Delimited Text Layer plug-in does not cope with TAB delimited text with extra TAB mark at the end of each row. Such a... zirneklitis -
08:28 AM Bug report #3646: GRASS toolbox: error removing vectors from a mapset under Windows
so it seems we are stuck here
http://trac.osgeo.org/grass/ticket/1158#comment:15
can someone do what glynn asks, s...
Giovanni Manghi
08:23 AM Bug report #3646: GRASS toolbox: error removing vectors from a mapset under Windows
Replying to [comment:1 lutra]:
> it fails also from the GRASS command line
>
>
> ...
hellik -
04:48 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
Replying to [comment:4 nirvn]:
> Would it be possible to ship 1.7 with a srs.db synched with gdal latest datum defin...
Maciej Sieczka -
03:31 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
jef, as mentioned over irc, the updated srs.db you applied in changeset 15584 (http://trac.osgeo.org/qgis/changeset/1... Mathieu Pellerin - nIRV

2011-03-26

03:29 PM Bug report #3661 (Closed): Error in MultipartToSingleparts
commit:48900197 (SVN r15611) should fix it. Jürgen Fischer
03:29 PM Bug report #3661 (Closed): Error in MultipartToSingleparts
commit:48900197 (SVN r15611) should fix it. Jürgen Fischer
08:49 AM Bug report #2230: Vertex markers are displayed in Print Composer
Confirmed on Windows with QGIS 1.7 commit:3d9e4144 (SVN r15607) from OSGeo4W. But on Linux with commit:35a5f55b (SVN ... Alexander Bruy
08:34 AM Bug report #3386: new symbology: rotation and dimension
see also #3680 Borys Jurgiel
08:34 AM Bug report #3680 (Closed): Size and rotation field does not work after reclassification
Duplicates #3386 Borys Jurgiel
08:34 AM Bug report #3680 (Closed): Size and rotation field does not work after reclassification
Duplicates #3386 Borys Jurgiel
07:41 AM Bug report #3680: Size and rotation field does not work after reclassification
see also #3681 Borys Jurgiel
07:33 AM Bug report #3680 (Closed): Size and rotation field does not work after reclassification
1. Classify a point layer (with the new symbology of course)
2. Set rotation and/or size field
3. Everything works pe...
Borys Jurgiel
08:31 AM Feature request #2898 (Closed): Ranking of classes within a layer when displaying
On the map, it's done by the symbol levels. On the category list, it duplicates #2816. Borys Jurgiel
08:31 AM Feature request #2898 (Closed): Ranking of classes within a layer when displaying
On the map, it's done by the symbol levels. On the category list, it duplicates #2816. Borys Jurgiel
08:27 AM Feature request #2816: Allow class rearrangement in the Layer Properties->Style and in the Layers...
The button has been added in the meantime. The legend order can be set in the print composer.
The last remaining en...
Borys Jurgiel
08:14 AM Feature request #2841: More options for chart decorations
The outline is now present with the new diagrams. Borys Jurgiel
07:41 AM Bug report #3681: Size and rotation field crash Qgis with incomplete classified layer
see also #3680 Borys Jurgiel
07:36 AM Bug report #3681 (Closed): Size and rotation field crash Qgis with incomplete classified layer
1. Classify a point layer (categorized or graduated renderer)
2. Remove one of the classes
3. Enable size or rotation...
Borys Jurgiel
01:54 AM Bug report #3562: QGIS incompatible with QWT 6.0.0
http://sourceforge.net/support/tracker.php?aid=3195924
See comment there!
Volker Fröhlich

2011-03-25

11:28 PM Bug report #2230 (Feedback): Vertex markers are displayed in Print Composer
In commit:3d9e4144 (SVN r15607) bug still present. dr -
11:28 PM Bug report #2230 (Feedback): Vertex markers are displayed in Print Composer
In commit:3d9e4144 (SVN r15607) bug still present. dr -
03:42 PM Bug report #2230 (Closed): Vertex markers are displayed in Print Composer
Applied in commit:3d9e4144 (SVN r15607). Thanks! Marco Hugentobler
03:42 PM Bug report #2230 (Closed): Vertex markers are displayed in Print Composer
Applied in commit:3d9e4144 (SVN r15607). Thanks! Marco Hugentobler
04:09 AM Bug report #2230 (Open): Vertex markers are displayed in Print Composer
Marco Hugentobler
03:57 AM Bug report #2230: Vertex markers are displayed in Print Composer
Patch was added , Can anyone review and give comments here ? sunilkcube -
08:34 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
mhugent, will check as soon as the qgis trunk PPA gets updated.
Thanks for working on this issue. I see what you're ...
Mathieu Pellerin - nIRV
02:41 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
I think we can support both use-cases. Try commit:08c88575 (SVN r15605), I hope you can achieve the homogenous spacin... Marco Hugentobler
02:50 PM Bug report #3658 (Closed): Size scale field does not work with transparency in point layers
Fixed in commit:9d3e989c (SVN r15606) Martin Dobias
02:50 PM Bug report #3658 (Closed): Size scale field does not work with transparency in point layers
Fixed in commit:9d3e989c (SVN r15606) Martin Dobias
02:32 PM Bug report #3658: Size scale field does not work with transparency in point layers
Ok, it does work with line layers but not with points. Anita Graser
02:30 PM Bug report #3658: Size scale field does not work with transparency in point layers
The attached file allows me to reproduce the bug on both Ubuntu and Win7.
I just load the layer and apply the settin...
Anita Graser
01:49 PM Bug report #3658: Size scale field does not work with transparency in point layers
Cannot replicate. Using a shapefile with lines, 50% transparency and a size scale field.
Please attach test data or ...
Martin Dobias
02:31 PM Bug report #3479 (Closed): New Symbology does not print
fixed in commit:ccee31f4 (SVN r15604) Martin Dobias
02:31 PM Bug report #3479 (Closed): New Symbology does not print
fixed in commit:ccee31f4 (SVN r15604) Martin Dobias
02:27 PM Bug report #3679 (Closed): eVis not working with point layers
eVis Event ID and Browser have both stopped working.
Usning trunk and load a project that works with 1.6.0, using eVi...
Donkagen2 -
01:43 PM Bug report #3541 (Closed): New symbology duplicates categories of a spatialite layer
Something is wrong with the table. When you run in sqlite command line tool: ... Martin Dobias
01:43 PM Bug report #3541 (Closed): New symbology duplicates categories of a spatialite layer
Something is wrong with the table. When you run in sqlite command line tool: ... Martin Dobias
01:19 PM Bug report #3532 (Closed): Some labeling settings are not saved in qml
This option cannot be stored in a QML file since it is a global setting for all layers that are being labeled. Martin Dobias
01:19 PM Bug report #3532 (Closed): Some labeling settings are not saved in qml
This option cannot be stored in a QML file since it is a global setting for all layers that are being labeled. Martin Dobias
01:16 PM Feature request #2834 (Closed): Rendering quality options issue
Tooltip removed in commit:fd6849ce (SVN r15600). Martin Dobias
01:16 PM Feature request #2834 (Closed): Rendering quality options issue
Tooltip removed in commit:fd6849ce (SVN r15600). Martin Dobias
11:39 AM Bug report #3677 (Closed): New symbology: shifted fills result in a shifted layer
That is the intended behavior. For example you can use it for a "drop shadow" effect: take two fill symbol layers and... Martin Dobias
11:39 AM Bug report #3677 (Closed): New symbology: shifted fills result in a shifted layer
That is the intended behavior. For example you can use it for a "drop shadow" effect: take two fill symbol layers and... Martin Dobias
09:56 AM Bug report #3677 (Closed): New symbology: shifted fills result in a shifted layer
If I apply an offset to a symbol fill, the layer is displayed entirely shifted. See attached image Paolo Cavallini
11:09 AM Bug report #3678 (Closed): domanda
This trac is in english. Please use one of the mailing lists to ask for support. Paolo Cavallini
11:09 AM Bug report #3678 (Closed): domanda
This trac is in english. Please use one of the mailing lists to ask for support. Paolo Cavallini
10:27 AM Bug report #3678 (Closed): domanda
ciao sono studio colonna, vorrei sapere copme fare ad aprire un file salvato con la vecchia versione 0.10 e aprirla c... studiocolonna -

2011-03-24

10:56 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
The user who complained should probably file a ticket and have a discussion surrounding his specific needs and possib... Mathieu Pellerin - nIRV
10:47 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
Yep, the roads & rivers is basically a road layer + a river layer with empty layer name.
I don't understand the logi...
Mathieu Pellerin - nIRV
08:38 AM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
From the screenshots it seems to me that Roads & Rivers / River are coming from two different maplayers. Is that corr... Marco Hugentobler
08:01 PM Feature request #2834: Rendering quality options issue
Tooltip for second options says: "Select this will unselect...". If selecting both options is not bug I guess this to... dr -
07:38 PM Feature request #2834 (Feedback): Rendering quality options issue
dr -
07:35 PM Feature request #2834: Rendering quality options issue
Replying to [comment:1 jef]:
> Not exactly. With radio buttons you need to selected exactly one option. With the re...
dr -
05:22 PM Feature request #3263 (Closed): QgsLegendInterface.addGroup() nests all groups
Borys Jurgiel
05:22 PM Feature request #3263: QgsLegendInterface.addGroup() nests all groups
applied in commit:bf9e9d54 (SVN r15595) Borys Jurgiel
05:18 PM Feature request #3263 (Feedback): QgsLegendInterface.addGroup() nests all groups
Marco Bernasocchi
02:04 PM Feature request #3651: Possibility to set rotation constraint for pal label candidate generation
The new labeling has two distinct modes:
1. fully automatic mode: pal library determines possible positions and rotat...
Marco Hugentobler
01:52 PM Bug report #3247 (Closed): Map Composer scale bar does not update after changing project CRS
Marco Hugentobler
09:24 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Fixed in commit:76d0e28d (SVN r15592) Marco Hugentobler
09:24 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Fixed in commit:76d0e28d (SVN r15592) Marco Hugentobler
01:10 AM Bug report #3643: wrong direction of label direction symbol
Seems to be vertical lines only.
I attach a shapefile. Turn on arrows decoration on symbology-ng and orientation symb...
Sandro Santilli
09:19 AM Feature request #3583: patch to use the same pal instance for labeling-ng and for diagrams
I've no idea if this might be related, but I now seem to have very few labels showing on the canvas. I.e., for a poin... John Tull
07:48 AM Bug report #3661: Error in MultipartToSingleparts
Replying to [comment:1 jef]:
> related to commit:242c3151 (SVN r15452) - and ping pong :)
so both are crazy fixes :)
Giuseppe Sucameli
01:25 AM Bug report #3661: Error in MultipartToSingleparts
related to commit:242c3151 (SVN r15452) - and ping pong :) Jürgen Fischer
05:27 AM Bug report #3676 (Closed): Add option to specify field width when exporting ShapeFile
I made the following post in the forum.
_"I am new to QGIS so please bear with my ignorance._
_I am using QGIS Vers...
lfedje -
02:23 AM Bug report #3675: Rasters in Win7 crashing
Hi Jef
plugins installed now
ftools
plugin builder
openstreetmap plugin
mapserver export
plugin installer
gdaltools...
Bill Williamson
01:15 AM Bug report #3635: v.db.what.connect does not work
The same command works from the shell:... Paolo Cavallini

2011-03-23

12:10 AM Bug report #3675: Rasters in Win7 crashing
Does the crash also occur without any third party plugins in place? If so, please determine with which plugin QGIS ... Jürgen Fischer
10:08 PM Bug report #3675 (Closed): Rasters in Win7 crashing
Bad behaviour with Landsat rasters and
at the least crash on exit with all rasters in Win7
Related forum posts:
htt...
Bill Williamson
04:16 PM Bug report #3099: Projection Failure
If the following files:
ttp://www.icsm.gov.au/icsm/gda/gdatm/national66.zip
http://www.icsm.gov.au/icsm/gda/gdatm/nat...
ramon .
02:58 PM Bug report #3643: wrong direction of label direction symbol
Is this only for vertical lines or for others too? Could you attach a small testdataset to reproduce the problem? Marco Hugentobler
02:00 PM Bug report #3674 (Closed): Can not set custom CRS as default for new project/layer
fixed in commit:afe3c309 (SVN r15587). Jürgen Fischer
02:00 PM Bug report #3674 (Closed): Can not set custom CRS as default for new project/layer
fixed in commit:afe3c309 (SVN r15587). Jürgen Fischer
07:54 AM Bug report #3674: Can not set custom CRS as default for new project/layer
JEF, sorry for planting this bug, but you'll do it easier and safer than me :) Borys Jurgiel
07:34 AM Bug report #3674 (Closed): Can not set custom CRS as default for new project/layer
It is not possible to set custom CRS as default for new project/layer ( 'Options > CRS '). Even if selected in list o... Ivan Mincik
09:14 AM Feature request #3649: Raster calculator should work on raster files in different CRS
commit:f1527c7f (SVN r15582) implements a solution where the crs is copied from the first layer involved in the calcu... Marco Hugentobler
08:14 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
a downgrade to the previous GRASS release available in osgeo4w proven ineffective. On standalone 1.5 it seems to real... Giovanni Manghi
07:14 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
I am pretty sure that at the beginning of February this wasn't a issue with both trunk/1.6 from osgeo4w. Since then i... Giovanni Manghi
07:40 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
the attached patch updates our db with the parameters of PROJ. This could be run on automatically at installation (u... Jürgen Fischer
07:16 AM Bug report #3668 (Closed): GDALTools: DEM throws an error
I do not understand why, but now it works. Paolo Cavallini
07:16 AM Bug report #3668 (Closed): GDALTools: DEM throws an error
I do not understand why, but now it works. Paolo Cavallini
05:44 AM Bug report #3668: GDALTools: DEM throws an error
Yes, only DEM. The GDAL version reported in the About is the same as above (1.7.3).
Thanks.
Paolo Cavallini
05:41 AM Bug report #3668: GDALTools: DEM throws an error
Does DEM tool only throw this error?
Could you check the gdal version from [[GdalTools]] about dialog?
Giuseppe Sucameli
07:00 AM Bug report #3673 (Closed): Offline edit: do not allow select not PostGIS/WFS-T layers
*New description:*
Do not allow choose layers that are not PostGIS ones in the dialog of the off line editing plug...
Paolo Cavallini
06:10 AM Bug report #3672 (Closed): region error when creating a GRASS location?
Hi, I have seen this on both Linux and Windows.
If I open a "old" mapset (don't remember exactly when it was created...
Giovanni Manghi
04:43 AM Bug report #2230 (In Progress): Vertex markers are displayed in Print Composer
sunilkcube -
03:35 AM Bug report #3282 (Closed): after running r.watershed, when clicking on "view output" is thrown an...
Just checked, here it works. Please check again, and reopen the ticket if still valid.
It would be useful if you coul...
Paolo Cavallini
03:35 AM Bug report #3282 (Closed): after running r.watershed, when clicking on "view output" is thrown an...
Just checked, here it works. Please check again, and reopen the ticket if still valid.
It would be useful if you coul...
Paolo Cavallini
03:26 AM Bug report #3655: Crash after resizing attribute table in dock window
See also #3670 Paolo Cavallini
03:25 AM Bug report #3670 (Closed): Crash when moving a panel
Paolo Cavallini
03:17 AM Bug report #3670: Crash when moving a panel
This should be duplicate of #3655 Ivan Mincik
01:52 AM Bug report #3670 (Closed): Crash when moving a panel
... Paolo Cavallini
02:24 AM Feature request #3671 (Closed): Auto-actualize "Show selected only"
When the checkbox "Show selected only" is activated in the attribute table, doing a new research will not result in t... Jean-Roc Morreale
01:43 AM Bug report #2181: "add to overview" menu item does not work
Confirmed: it works for rasters, not for vectors Paolo Cavallini

2011-03-22

12:24 AM Bug report #3663 (Feedback): GDALTools: clipper should act on selected layer only, not all
It does not appear to be the case:... Paolo Cavallini
12:24 AM Bug report #3663 (Feedback): GDALTools: clipper should act on selected layer only, not all
It does not appear to be the case:... Paolo Cavallini
08:26 AM Bug report #3663 (Closed): GDALTools: clipper should act on selected layer only, not all
I'm sure I fixed it yesterday evening.
Please update QGis at least at commit:351703b2 (SVN r15557) and try again.
Giuseppe Sucameli
08:26 AM Bug report #3663 (Closed): GDALTools: clipper should act on selected layer only, not all
I'm sure I fixed it yesterday evening.
Please update QGis at least at commit:351703b2 (SVN r15557) and try again.
Giuseppe Sucameli
08:22 AM Bug report #3663 (Closed): GDALTools: clipper should act on selected layer only, not all
Currently, the clipper tool tries to clip all loaded layers (including vectors), thus resulting in an error. Only the... Paolo Cavallini
12:15 AM Bug report #3669 (Closed): GDAL Tools: rasterize overwrite existing raster without asking for con...
When rasterizing a vector, an existing raster is silently overwritten. This is not safe. Paolo Cavallini
12:12 AM Bug report #3668 (Closed): GDALTools: DEM throws an error
When activating the Raster>DEM menu, I immediately get an error:... Paolo Cavallini
11:38 PM Bug report #3655: Crash after resizing attribute table in dock window
When testing on Debian Lenny, it seems that moving with any docked panel will lead to segfault. Ivan Mincik
11:35 PM Bug report #2798: Resizing GUI panels causes multiple reloading of enabled layers (especially pai...
Tested with current trunk version. It is still there. Ivan Mincik
05:05 PM Feature request #3623: Implement comparison operators in the field calculator
took out the not working functions - jef suggested it to be moved to query builder help file which has to be written ... Werner Macho
04:18 PM Bug report #2534 (Closed): avoid the possibility to enter -in attributes table- strings/numbers b...
applied heavly modified in commit:71c6454e (SVN r15567). Thanks. Jürgen Fischer
04:18 PM Bug report #2534 (Closed): avoid the possibility to enter -in attributes table- strings/numbers b...
applied heavly modified in commit:71c6454e (SVN r15567). Thanks. Jürgen Fischer
02:24 AM Bug report #2534: avoid the possibility to enter -in attributes table- strings/numbers beyond the...
Replying to [comment:5 jef]:
Thank you very much for your valuable comments. I have attached a new patch file. Can y...
sunilkcube -
01:26 PM Bug report #3667 (Closed): When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0 Q...
When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0 QGIS crashes on WIN7 Prof. 64bit.
Find attached...
mawe -
11:56 AM Feature request #3263 (Closed): QgsLegendInterface.addGroup() nests all groups
I believe it can be closed now. Borys Jurgiel
11:56 AM Feature request #3263 (Closed): QgsLegendInterface.addGroup() nests all groups
I believe it can be closed now. Borys Jurgiel
08:39 AM Feature request #3263: QgsLegendInterface.addGroup() nests all groups
Applied in commit:855601c3 (SVN r15562). Thanks! Marco Hugentobler
09:50 AM Bug report #3664 (Closed): GDALTools: clipper sometimes leaves a red transparent rectangle
I made some changes in commit:a6de6592 (SVN r15563). The issue should be fixed. Giuseppe Sucameli
09:50 AM Bug report #3664 (Closed): GDALTools: clipper sometimes leaves a red transparent rectangle
I made some changes in commit:a6de6592 (SVN r15563). The issue should be fixed. Giuseppe Sucameli
08:28 AM Bug report #3664 (Closed): GDALTools: clipper sometimes leaves a red transparent rectangle
If the clipper window is closed before completing the command, a red transparent rectangle is left on the canvas, and... Paolo Cavallini
09:01 AM Bug report #3665 (Closed): GDALTools: rasterize does not need an existing raster with GDAL >=1.8
This was fixed in commit:63a41df8 (SVN r15470), see #3545 Giuseppe Sucameli
09:01 AM Bug report #3665 (Closed): GDALTools: rasterize does not need an existing raster with GDAL >=1.8
This was fixed in commit:63a41df8 (SVN r15470), see #3545 Giuseppe Sucameli
08:54 AM Bug report #3665: GDALTools: rasterize does not need an existing raster with GDAL >=1.8
Not: I mean the option "Output file for rasterized vectors (must exist)", that is not necessary for GDAL 1.8 Paolo Cavallini
08:48 AM Bug report #3665: GDALTools: rasterize does not need an existing raster with GDAL >=1.8
Do you mean to set "New size" width and height as mandatory fields if GDAL >= 1.8? Giuseppe Sucameli
08:40 AM Bug report #3665 (Closed): GDALTools: rasterize does not need an existing raster with GDAL >=1.8
When GDAL 1.8+ is available, the option to add an existring raster should be removed Paolo Cavallini
08:59 AM Bug report #3666 (Closed): GDALTools: translate does not reproject
If you tick the option "Target SRS" (a_srs), gdal_translate doens't reproject the input raster but override the outpu... Giuseppe Sucameli
08:59 AM Bug report #3666 (Closed): GDALTools: translate does not reproject
If you tick the option "Target SRS" (a_srs), gdal_translate doens't reproject the input raster but override the outpu... Giuseppe Sucameli
08:43 AM Bug report #3666 (Closed): GDALTools: translate does not reproject
When translating, an option is available to reproject the raster at the same time, but apparently it does not work Paolo Cavallini
08:55 AM Feature request #3436: Default settings for image output
yes, correct, the box is about the -co options. The outputformat can be chosen directly in the dialog of the raster t... Marco Hugentobler
08:53 AM Bug report #3660: Identify Feature not working with WMS layer

> WHen you say "Trunk" are you referring to the same version under the same operative system (at least Linux Debian)...
Giovanni Manghi
08:42 AM Bug report #1449: The map and overview canvas resizes incorrectly
Still there in trunk.
A partial work around is to toggle a layer's "Show in overview" state in the Layers context me...
Donkagen2 -
08:19 AM Bug report #3662 (Closed): GDALTools: clipper does not overwrite existing output
When clipping a raster, if an existing file is given as output.it is not overwritten, but the old file is loaded. Paolo Cavallini
02:59 AM Feature request #3645: synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
I've attached the script used to come up with the sql update statements. It's unfortunately not in python but in php. Mathieu Pellerin - nIRV

2011-03-21

12:49 AM Bug report #3660: Identify Feature not working with WMS layer
You get the correct response but I don't.
For your info I am running QGIS under KNOPPIX 6.2.1
I have attached two scr...
mbagni -
04:49 PM Bug report #3660: Identify Feature not working with WMS layer
Replying to [comment:2 mbagni]:
> WMS Server: http://demo.opengeo.org/geoserver/wms
> Layer: topp:tasmania_water_bodi...
Jürgen Fischer
04:24 PM Bug report #3660: Identify Feature not working with WMS layer
Replying to [comment:1 lutra]:
> can you tell what server and layer?
Different servers (I was testing mine) but for ...
mbagni -
04:04 PM Bug report #3660: Identify Feature not working with WMS layer
can you tell what server and layer? Giovanni Manghi
04:03 PM Bug report #3660 (Closed): Identify Feature not working with WMS layer
Hi,
I have encountered the following error which occurs only with the Linux version 1.6.0 (under Windows version 1.5....
mbagni -
12:25 AM Bug report #3655: Crash after resizing attribute table in dock window
This problem is not present on Debian Squeeze, which is using Qt 4.6.3. Ivan Mincik
07:05 AM Bug report #3655 (Closed): Crash after resizing attribute table in dock window
Qgis is crashing after trying to resize attribute table placed in dock window
How to replicate:
1. Configure Your Q...
Ivan Mincik
09:34 PM Bug report #3605: on trunk, legend items vertical spacing inconsistent, worked fine with 1.6
http://trac.osgeo.org/qgis/changeset/15242/trunk/qgis/src/core/composer/qgscomposerlegend.cpp
I pretty sure the chan...
Mathieu Pellerin - nIRV
04:21 PM Bug report #3661 (Closed): Error in MultipartToSingleparts
Running [[MultipartToSingleparts]] there's no error and no output. Giuseppe Sucameli
03:23 PM Bug report #3634: GRASS language is taken from system, not from QGIS settings
See also http://trac.osgeo.org/grass/ticket/879 Markus Neteler
02:59 PM Feature request #3222: Fast, easy and beautiful on the fly rule-based rendering of OSM maps
I proposed the following patch: patch_on_r15538-rbr_with_symbol_levels.diff
This is a patch against commit:b76c9620 ...
Mayeul Kauffmann
12:26 PM Feature request #3436: Default settings for image output
For what I understand the box takes all the -co options, by adding more formats I mean setting the -of flag to someth... Jean-Roc Morreale
11:49 AM Bug report #3659 (Closed): Size scale field does not work with symbol levels
When both size scale field and symbol layers are used in a layer style, nothing is drawn. Anita Graser
11:48 AM Bug report #3658 (Closed): Size scale field does not work with transparency in point layers
In new symbology, transparency settings are ignored when using size scale field Anita Graser
10:38 AM Feature request #3657 (Open): Local Histogram Stretch on multiple raster layers
It would be great if a user could select several raster layers on the legend and then click on Local Histogram Stretc... cgsbob -
09:37 AM Bug report #3656 (Closed): QGIS crashes after removing WMS layer from TOC
fixed in commit:ed75d684 (SVN r15553). Jürgen Fischer
09:37 AM Bug report #3656 (Closed): QGIS crashes after removing WMS layer from TOC
fixed in commit:ed75d684 (SVN r15553). Jürgen Fischer
08:44 AM Bug report #3656 (Closed): QGIS crashes after removing WMS layer from TOC
Subj in r15546. dr -
08:46 AM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
it does not seems to be related to size/complexity of vectors, it just happened with a very small line vector (3 lines). Giovanni Manghi
06:36 AM Bug report #3654 (Closed): Debian packaging depends on obsolete debs
fixed in . Jürgen Fischer
06:36 AM Bug report #3654 (Closed): Debian packaging depends on obsolete debs
fixed in . Jürgen Fischer
06:30 AM Bug report #3654 (Closed): Debian packaging depends on obsolete debs
dpkg-checkbuilddeps: Unmet build dependencies: python-sip4-dev (>= 4.5.0) | sip4 (>= 4.5)
Apparently they should dep...
Paolo Cavallini
04:17 AM Feature request #2000: Add a "don't make caps at the end of polylines" and "side" options in the ...
see also #3653 Giovanni Manghi
04:17 AM Feature request #3653 (Closed): Buffer tool
duplicate of #2000 Giovanni Manghi
04:17 AM Feature request #3653 (Closed): Buffer tool
duplicate of #2000 Giovanni Manghi
04:13 AM Feature request #3653 (Closed): Buffer tool
It would be nice if the Buffer tool in the Vector menu allowed to choose between Round or Flat End type when bufferin... elcuco -
03:06 AM Bug report #3652 (Closed): labels buffer: wrong results if data defined setting is used for size
see attached images Giovanni Manghi
01:59 AM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
Replying to [comment:2 neteler]:
> Is the GRASS version you are using sufficiently new?
I can't do much for that, we...
Giovanni Manghi
01:25 AM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
Is the GRASS version you are using sufficiently new? Markus Neteler
01:51 AM Feature request #3645 (In Progress): synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS data...
I created a tiny script to a) flag the srs.db's tbl_srs 'parameters' column needing updates and b) ouput the sql upda... Mathieu Pellerin - nIRV

2011-03-20

02:54 PM Feature request #3651 (Closed): Possibility to set rotation constraint for pal label candidate ge...
For new generation labeling, in order to get field-based rotation to work (or even show fields as available), you mus... John Tull
01:57 PM Feature request #3436: Default settings for image output
Good to hear it works.
It should also work with other formats. The parameters are passed directly to GDAL, so any val...
Marco Hugentobler
01:20 PM Feature request #3436: Default settings for image output
tried with commit:92a96092 (SVN r15543), it works great.
Would it be possible to expend it to other formats ? So a ...
Jean-Roc Morreale
01:53 PM Bug report #3650: shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk under Win...
PS
it works fine under linux/trunk
Giovanni Manghi
01:52 PM Bug report #3650 (Closed): shapefiles fails to be imported into GRASS mapset with qgis 1.6/trunk ...
I found a few shapefiles (I'll attach one as exemple) that are not imported into a GRASS mapset under Windows using q... Giovanni Manghi
01:47 PM Feature request #3649 (Closed): Raster calculator should work on raster files in different CRS
Take a simple raster e.g. a [[GeoTiff]] in UTM. Open the raster calculator and create a simple product based on that ... Tim Sutton
01:16 PM Bug report #3646: GRASS toolbox: error removing vectors from a mapset under Windows
in qgis 1.6/trunk it fails regardless if the vector was added to the qgis project or not Giovanni Manghi
12:07 PM Bug report #3646: GRASS toolbox: error removing vectors from a mapset under Windows
it fails also under qgis 1.5, in fact it depends if the GRASS vector is being displayed in the QGIS TOC. If it is in ... Giovanni Manghi
05:38 AM Bug report #3646: GRASS toolbox: error removing vectors from a mapset under Windows
it fails also from the GRASS command line... Giovanni Manghi
05:34 AM Bug report #3646 (Closed): GRASS toolbox: error removing vectors from a mapset under Windows
Since 1.6 (so it works fine under 1.5) every time a user tries to remove a vector map in GRASS toolbox browser using ... Giovanni Manghi
12:56 PM Bug report #3648: Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vectors in a...
This is very frustrating... because the bug it is pretty unpredictable, but definitely there. It seems to happen more... Giovanni Manghi
12:01 PM Bug report #3648 (Closed): Qgis 1.6/trunk, osgeo4w/standalone hangs/crashes when adding GRASS vec...
I spent the afternoon testing after Paolo told me that the last week he had many problems with GRASS vectors under Wi... Giovanni Manghi
10:32 AM Feature request #3647 (Closed): Add the choice "near to the pointOnSurface"
In the label-plugin there is these choices for label in advanced section:
above centroid
near centroid,
etc...
I gue...
aperi2007 -
08:33 AM Bug report #3639 (Closed): Incorrect rendering of rasters at big scales
It seems to be fixed in r15540M so I'm closing this bug.
Goyo D
08:33 AM Bug report #3639 (Closed): Incorrect rendering of rasters at big scales
It seems to be fixed in r15540M so I'm closing this bug.
Goyo D
04:53 AM Bug report #3632 (Closed): incorrect reprojection on windows (7), fine on linux
Marking this bug as invalid. The problem isn't platform specific. QGIS needs to update its SRS definitions.
This new...
Mathieu Pellerin - nIRV
04:53 AM Bug report #3632 (Closed): incorrect reprojection on windows (7), fine on linux
Marking this bug as invalid. The problem isn't platform specific. QGIS needs to update its SRS definitions.
This new...
Mathieu Pellerin - nIRV
04:51 AM Feature request #3645 (Closed): synchronize QGIS' SRS definitions with GDAL's 1.8.0 SRS database
Some QGIS´ SRS definitions are missing towgs84 values, including UTM Indian 1960 48N, resulting in misalignment of mi... Mathieu Pellerin - nIRV
03:38 AM Bug report #3644 (Closed): Toolbars loose their position after crash
It doesn't happen always but it definitely happens most of the times. Under Windows restarting QGIS after a crash wil... Giovanni Manghi
03:27 AM Feature request #3636 (Closed): Add source name to merge shapefiles to one
there is a patch that awaiting to be applied. See #3010 Giovanni Manghi
03:27 AM Feature request #3636 (Closed): Add source name to merge shapefiles to one
there is a patch that awaiting to be applied. See #3010 Giovanni Manghi
02:49 AM Bug report #3643 (Closed): wrong direction of label direction symbol
As you can see in the attached image, the "direction symbol" added by the label disagrees with the "direction symbol"... Sandro Santilli
 

Also available in: Atom