Activity

From 2013-08-05 to 2013-09-03

2013-09-03

11:50 PM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Will this bug be closed before QGIS 2 branching ? René-Luc ReLuc
04:50 PM Bug report #8487: manual CRS being overwritten by QGIS
commit:14f639d Adds the above CRS's Tim Sutton
04:19 PM Bug report #8487: manual CRS being overwritten by QGIS
Further to this, I have will insert the following CRS definitions into the srs.db. Due to the last minute nature of t... Tim Sutton
06:07 AM Bug report #8487: manual CRS being overwritten by QGIS
I mistakenly downgraded this earlier - the original bug this Issue describes is still a blocker until resolved. Gavin Fleming
05:26 AM Bug report #8487: manual CRS being overwritten by QGIS
Let's hang five on Tim's "Incorrect project definitions" above. Technically they are correct according to the EPSG bu... Gavin Fleming
04:10 PM Bug report #8567: SLD : an invalid sld is generated when exporting a polygon with fill styles
The patch is applied, thanks!
Please, the next time create a pull request on GitHub.
Giuseppe Sucameli
04:07 PM Bug report #8567 (Closed): SLD : an invalid sld is generated when exporting a polygon with fill s...
Fixed in changeset commit:"4bc1beb844cef09b5b58570a4e402a5c422bc32c". Giuseppe Sucameli
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:17 AM Bug report #8567 (Closed): SLD : an invalid sld is generated when exporting a polygon with fill s...
This was initially reported on the mailing list:
- http://lists.osgeo.org/pipermail/qgis-user/2013-August/023650.h...
Yewondwossen Assefa
03:52 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
I would use it even if the estimated bug is fixed. It is much faster then QGIS having to check the type each time yo... Nathan Woodrow
03:48 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
That's great. That will be useful until the bug gets fixed.
Thanks, Nathan.
Mike Gates
03:36 PM Bug report #8561: Node tool does not work well when change the active layer
Fix confirmed!
Thank you Nathan!
Pedro Venâncio
05:03 AM Bug report #8561 (Closed): Node tool does not work well when change the active layer
Fixed in changeset commit:"510f5cb037351e5b19e312457e5f684faac37746". Nathan Woodrow
02:07 AM Bug report #8561: Node tool does not work well when change the active layer
Then is a blocker. Giovanni Manghi
01:14 PM Feature request #8568 (Open): Mac trackpad functionality
How to steal a huge march on Google Earth and Maps? Handle Mac trackpad gestures! The Mac (iMac, MacBook) trackpad us... Charles Rethman
09:56 AM Bug report #8558: Switching CRS On The Fly messes up area calculations
Looking at #4564, my issue is similar, although more specific to 1.9 (2.0 alpha) because the Field Calculator is now ... Charles Rethman
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
06:58 AM Bug report #8564 (Closed): context_help strings huge
The context help is very difficult to translate, as the whole text is in large blocks. Much of the same info is repea... Paolo Cavallini
06:02 AM Bug report #8311 (Closed): Layer display choice should default to "Field", not "HTML"
Fixed in changeset commit:"88d3adeafa7d088a3a9dafe898d4feac6aeaf652". Nathan Woodrow
05:07 AM Bug report #8473: Cannot rename layers in composer legend
I've tested a today compliation on Ubuntu, qgis is named fef175b, and it works. René-Luc ReLuc
04:40 AM Bug report #8473: Cannot rename layers in composer legend
Hi Lene,
Which is the revision code ?
The fix has been introduced in commit:7f8b259, so I think the last weekly shou...
Salvatore Larosa
04:27 AM Bug report #8473: Cannot rename layers in composer legend
Lene Fischer wrote:
> I have just downloaded weekly (03-09-13) Still the same problem. Is the correction not in the w...
Giovanni Manghi
04:05 AM Bug report #8473: Cannot rename layers in composer legend
I have just downloaded weekly (03-09-13) Still the same problem. Is the correction not in the weekly yet?
Regards
Len...
Lene Fischer
04:55 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Bug fixed thanks to fundings from Agence de l'Eau Adour-Garonne. Vincent Mora
04:35 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Thank you very much for this fix, Vincent Matthias Kuhn
04:35 AM Bug report #7441 (Closed): Measurements in degrees even when meters are chosen as map units
Fixed in changeset commit:"5329ad5896d5b23189f9603f11793c79fb147672". Vincent Mora
04:16 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Matthias, I updated the PR 778 and it fixes both what Regis observed and what you observed. Can you plz try it and co... Vincent Mora
03:00 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
On it, doing my best to have something in early afternoon. Vincent Mora
02:17 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Tim is going to branch for release today, any chance to have at least a temporary solution committed? Giovanni Manghi
04:51 AM Bug report #8551 (Feedback): QGIS-generated WKT CRS flooring real number coordinates
I just tested on qgis master (on Linux) with a projection that I know
+proj=tmerc +lat_0=39.66666666666666 +lon_0=-8...
Giovanni Manghi
04:51 AM Bug report #8551 (Feedback): QGIS-generated WKT CRS flooring real number coordinates
I just tested on qgis master (on Linux) with a projection that I know
+proj=tmerc +lat_0=39.66666666666666 +lon_0=-8...
Giovanni Manghi
02:37 AM Bug report #8562 (Closed): Crash when saving .qml file from the Style tab of Properties
fixed in commit:a2a2d7ac545e55fdc0b818afa3da43a3ec70d464
Please reopen if need !
Salvatore Larosa
02:19 AM Bug report #8562 (Closed): Crash when saving .qml file from the Style tab of Properties
When saving a new classified style as a qml file with different fill colours, QGIS 1.9 (build cae90cd) crashes. Previ... Charles Rethman
02:08 AM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Trevor Wiens wrote:
> Thanks for letting me know Salvatore. It is too bad however that for users not using the master...
Giovanni Manghi
02:08 AM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Trevor Wiens wrote:
> Thanks for letting me know Salvatore. It is too bad however that for users not using the master...
Giovanni Manghi
02:07 AM Bug report #8552 (Feedback): unavailable WMS url blocking project load
Have you tested qgis master? I recall that this may have been fixed there. Giovanni Manghi
02:07 AM Bug report #8552 (Feedback): unavailable WMS url blocking project load
Have you tested qgis master? I recall that this may have been fixed there. Giovanni Manghi

2013-09-02

01:39 AM Bug report #8561 (Closed): Node tool does not work well when change the active layer
Please see the screencast:
https://www.dropbox.com/s/ubn20f6fywrrtod/node_tool.avi
It happens in Windows and Linux, ...
Pedro Venâncio
01:09 AM Feature request #8560 (Open): Creating User-defined CRS codes --save them in PostGIS or SpatiaLit...
I am busy making a whole lot of Albers EA and Lambert CC customs projections for countries in Africa. I need them for... Charles Rethman
01:02 AM Feature request #8559 (Open): Doing calculations with CRS projections set "On The Fly"
If you have data in a certain projection--say long-lat WGS84--and you want to do a calculation that can only be done ... Charles Rethman
12:07 AM Bug report #8558 (Closed): Switching CRS On The Fly messes up area calculations
My data covers whole Southern Africa region -- South Africa up to DRC-- therefore it is stored in Long-Lat WGS84. How... Charles Rethman
12:06 AM Bug report #8557 (Closed): Untranslatable strings in Processing
Several Processing (AKA Sextante) strings are untranslatable.
Even in completed translations we still have:
Run, Edit...
Paolo Cavallini
12:01 AM Bug report #8553: Diagrams: Automated placement settings are not saved or loaded in the project file
There is a (rather unintuitive) checkbox "save settings to project" at the bottom.
IMO this could be totally removed...
Matthias Kuhn
01:28 PM Bug report #8553 (Closed): Diagrams: Automated placement settings are not saved or loaded in the ...
Steps to reproduce:
1.
Set "automated placement settings" (Diagrams --> Position tab --> Automated Placement Setting...
Andreas Neumann
11:56 PM Bug report #8554 (Closed): Diagrams: pie charts are sometimes scaled non-uniform
Fixed in changeset commit:"fef175b618dc5d7bc56008faeb648ea5d9bd7fc1". Matthias Kuhn
01:49 PM Bug report #8554: Diagrams: pie charts are sometimes scaled non-uniform
You can download a sample project here: http://www.carto.net/neumann/temp/diagramproject.zip Andreas Neumann
01:37 PM Bug report #8554 (Closed): Diagrams: pie charts are sometimes scaled non-uniform
When setting a minimum size for pie charts and printing or exporting to PDF some smaller diagrams (those at or below ... Andreas Neumann
11:35 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
Have the same problem on arch linux. There is an problem with new SIP API. I had try some older sip versions, but thi... Jan Michalek
09:48 PM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Providing zipped file containing both shapefiles used in testing for comment 34.
Thanks Vincent. Your explanation ma...
Neil Bower
02:45 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
That was unintended, indeed. I just tried with 2154, but it still gives me a city diameter of 2.5 cm, when switching ... Matthias Kuhn
02:22 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Matthias: can you my PR and try switching to 2154 instead of 2145? Vincent Mora
02:23 PM Bug report #8555: ftools 0.6.2 Intersection of points with polygons fails to produce output
Thanks for letting me know Salvatore. It is too bad however that for users not using the master, these bugs persist. ... Trevor Wiens
02:07 PM Bug report #8555: ftools 0.6.2 Intersection of points with polygons fails to produce output
Hi, this has been fixed in master (almost 2.0 version) a long time ago, getGeomType checks the wkbType == 1 [0]
You c...
Salvatore Larosa
01:55 PM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Intersecting a points layer with a polygon layer does not produce any output.
line 978 of doGeoprocessing.py reads a...
Trevor Wiens
08:46 AM Bug report #8552 (Closed): unavailable WMS url blocking project load
I open a project that has a WMS layer defined, but I am offline. The project loads till it gets to the WMS layer then... Gavin Fleming
08:41 AM Bug report #8551 (Closed): QGIS-generated WKT CRS flooring real number coordinates
define a custom CRS (e.g. aea) with decimal parameters when saving as a shapefile, the prj and qpj files generated by... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
02:31 AM Bug report #8487: manual CRS being overwritten by QGIS
Tim,
For your proposed schema did you mean the following, as you appear to have them switched around?
Lo Hartebeesho...
craigleat -
02:00 AM Bug report #8487: manual CRS being overwritten by QGIS
There are a complex of issues, here I try to outline a roadmap to address them:
h1. Incorrect Proj4 definitions
/us...
Tim Sutton
05:34 AM Feature request #3121: print composer: allow generating the legend classes of only the visibile f...
+1. I didn't find this feature demand and created another topic. It is indeed a very useful fonction as deleting mult... Arthur Vignacq
05:23 AM Bug report #8550 (Closed): Huge icons on buttons in browser panel
See the attached screenshot. Do the buttons in the browser always have such huge icons, or is it only on my system? Alister Hood

2013-09-01

01:54 AM Bug report #8534: Unable to uninstall the Qgis
Dear Team,
Thanks for the update.
I am not noticed any error message during installation and I wrote that due to unin...
Thaha Ibrahimkutty
01:43 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
@Vincent,
Sorry, I'm a bit confused. I was under the impression, that your pull request fixes the behavior Régis o...
Matthias Kuhn
01:17 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units

Matthias: I'm not sure about the utility of this canvas unit selection. My best guess is that it allows the user to ...
Vincent Mora
11:31 PM Bug report #8487: manual CRS being overwritten by QGIS
Frank Sokolic wrote:
> For me, the issue is that the proj4 definitions in SRS.db for these South African CRSs are not...
craigleat -
07:46 AM Bug report #8487: manual CRS being overwritten by QGIS
I found a simpler solution though it wasn't easily apparent. It you specify +axis=enu explicitly (the normal north-or... Gavin Fleming
04:13 PM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
I agree with Giovanni, it would be important to have this problem solved to 2.0. Pedro Venâncio
12:00 PM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
sorry for the overzealous approach, forget my note! Salvatore Larosa
11:22 AM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
Hi Salvatore,
Not sure how that signal relates to the *@QgsVectorLayerEditBuffer.addedFeatures()@* public function.
...
Larry Shaffer
11:11 AM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
Hi Larry,
this should not be hard to solve, I haven't a build environment under windows.
Anyone could try the follow...
Salvatore Larosa
10:41 AM Bug report #8543 (Closed): QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8...
Repeatable steps:
# Put a vector layer into edit mode
# Add a feature
# Run commands in console...
Larry Shaffer
11:57 AM Bug report #8542: Plugin Manager initial sorting indicates 'by name' but it is not
Looks good here on Mac, too. Thanks Borys! Larry Shaffer
11:07 AM Bug report #8542: Plugin Manager initial sorting indicates 'by name' but it is not
Thanks a lot, fixed! Borys Jurgiel
11:07 AM Bug report #8542 (Closed): Plugin Manager initial sorting indicates 'by name' but it is not
Fixed in changeset commit:"43372c0eee7b5184907c0f56fb26af39815a468d". Borys Jurgiel
10:26 AM Bug report #8542 (Closed): Plugin Manager initial sorting indicates 'by name' but it is not
After initial Plugin Manager opening, contextual menu of plugin listing shows 'sort by name' checked, but it is not s... Larry Shaffer
11:53 AM Bug report #8536 (Feedback): copy from existing CRS does not copy
probably the same issue as here #8298 Please leave feedback. Giovanni Manghi
08:42 AM Bug report #8536 (Closed): copy from existing CRS does not copy
when created a new custom CRS, choose Add new CRS. Then Copy existing CRS. If you choose a CRS from the Recently Used... Gavin Fleming
11:10 AM Bug report #8548 (Closed): symbol level defaults not sequential
enable symbol levels when there are two levels and they default to 0 and 1. Enable symbols levels when there are thre... Gavin Fleming
11:05 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
duplicate of #4419
see also
https://issues.qgis.org/wiki/quantum-gis/Switching_from_Old_to_New_Symbology_and_Labeling
Giovanni Manghi
11:05 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
duplicate of #4419
see also
https://issues.qgis.org/wiki/quantum-gis/Switching_from_Old_to_New_Symbology_and_Labeling
Giovanni Manghi
11:01 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
It's nice having a unique value renderer available in master but it's still lots of clicks away and not intuitive to ... Gavin Fleming
10:52 AM Bug report #8546: default maximum scale shows nonsense value
just click the button "current" and you are good to go... Giovanni Manghi
10:49 AM Bug report #8546 (Closed): default maximum scale shows nonsense value
Open layer properties and set scale dependent visibility for the first time on that layer and the maximum scale appea... Gavin Fleming
10:47 AM Bug report #8545 (Feedback): rule-based style list does not show scale ranges in Linux
I can see it also on linux. Please post a screenshot. Giovanni Manghi
10:47 AM Bug report #8545 (Feedback): rule-based style list does not show scale ranges in Linux
I can see it also on linux. Please post a screenshot. Giovanni Manghi
10:44 AM Bug report #8545 (Closed): rule-based style list does not show scale ranges in Linux
In windows there is a column showing scale ranges of each rule but this is missing in Linux Gavin Fleming
10:41 AM Feature request #8544 (Closed): toggle each class in TOC
In the TOC view, it would be useful to be able to toggle a class on or off to assist with visualisation or data explo... Gavin Fleming
10:26 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
please post questions on the mailing lists, IRC or gis.stackexchange.com
anyway the answer is yes, qgis 2.0 will sup...
Giovanni Manghi
10:26 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
please post questions on the mailing lists, IRC or gis.stackexchange.com
anyway the answer is yes, qgis 2.0 will sup...
Giovanni Manghi
10:25 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
I've just done a QGIS course at a government agency where all their imagery is ecw or MrSID. If QGIS 2 ships with MrS... Gavin Fleming
10:20 AM Bug report #8540 (Feedback): 1.9 does not render the workshop van der Grinten
can you post a link to the workshops? Giovanni Manghi
10:20 AM Bug report #8540 (Feedback): 1.9 does not render the workshop van der Grinten
can you post a link to the workshops? Giovanni Manghi
10:18 AM Bug report #8540 (Closed): 1.9 does not render the workshop van der Grinten
In the linfiniti workshop, an exercise is to create the van der Grinten CRS as a custom CRS using Anita Graser's blog... Gavin Fleming
10:04 AM Bug report #8539 (Feedback): geometry collapsing due to intersection avoidance when filling polygons
are you on master? it is a regression since 1.8? Giovanni Manghi
10:04 AM Bug report #8539 (Feedback): geometry collapsing due to intersection avoidance when filling polygons
are you on master? it is a regression since 1.8? Giovanni Manghi
10:01 AM Bug report #8539 (Closed): geometry collapsing due to intersection avoidance when filling polygons
Edit a polygon layer with island rings. Set snapping such that digitising a new polygon around the ring fills the rin... Gavin Fleming
09:49 AM Bug report #8538: SVG symbols greyed out
Hi,
This is a known graphical bug in the way Windows renders (or doesn't in this case) SVGs. The new symbols are _in...
Larry Shaffer
09:39 AM Bug report #8538 (Closed): SVG symbols greyed out
In the layer style tab and elsewhere where available SVG symbols are shown,many of them appear greyed out. You can ju... Gavin Fleming
09:24 AM Feature request #8537 (Closed): snap when measuring
having the option to snap when measuring would enabling more accurate measurement when desired. If the measure tool c... Gavin Fleming
03:56 AM Bug report #8521 (Closed): DB Manager is not able to delete raster table
Fixed in changeset commit:"3ac0759b048504037174f48cfc70fb7f8d519cba". Salvatore Larosa

2013-08-31

01:46 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...

> Giovanni, could you also test the other providers, that the changes did not introduce any errors which have been m...
Giovanni Manghi
01:35 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Here is the create script for it:... Nathan Woodrow
07:12 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Woodrow wrote:
> Adding one of those will help with the table listing times in the dialog. Once you have one it wil...
Mike Gates
06:58 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Adding one of those will help with the table listing times in the dialog. Once you have one it will list all the tab... Nathan Woodrow
06:55 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Nathan Woodrow wrote:
> Do you have a geometry_columns table in your database?
No, I don't.
Mike Gates
01:27 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
I don't see anyone fixing this before the 2.0 release, I don't anyway understand how this issue does not raise more a... Giovanni Manghi
03:36 PM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
Hi,
I can not reproduce this with latest master on Mac OS X 10.7.5. Recently, the handling of QPyNullVariant return ...
Larry Shaffer
01:53 PM Bug report #8367: "missing font text" red message on layer labeling settings
Please verify if commit commit:4c402731 fixes the issue. Larry Shaffer
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
09:32 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
... Neil Bower
03:59 AM Feature request #8535 (Open): SAGA Supervised Classification: add option "Get class statistics from"
Hello everybody,
it would be good (at least for the Semi-Automatic Classification Plugin) to allow for the selection...
Luca Congedo

2013-08-30

11:02 PM Bug report #8534 (Closed): Unable to uninstall the Qgis
Dear Team,
My PC Qgis is not installed properly,so i was trying to uninstall the program but i am getting the followi...
Thaha Ibrahimkutty
10:02 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Do you have a geometry_columns table in your database? Nathan Woodrow
01:27 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
Whith update pacman I get the next error:... Samuel Fernando Mesa Giraldo
06:51 AM Bug report #8531: Raster trasparency setting not saved in the project
I cannot confirm with both Linux and Windows and (as example) the attached 8bit tiff. Giovanni Manghi
04:00 AM Bug report #8531: Raster trasparency setting not saved in the project
No, it doesn't work in the last 3 weeks of the master release.
leolami -
03:54 AM Bug report #8531: Raster trasparency setting not saved in the project
Yes, it works in 1.8. leolami -
03:54 AM Bug report #8531: Raster trasparency setting not saved in the project
I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013). leolami -
03:52 AM Bug report #8531 (Feedback): Raster trasparency setting not saved in the project
Giovanni Manghi
03:52 AM Bug report #8531: Raster trasparency setting not saved in the project
on qgis master? it used to work ok in previous master releases? Giovanni Manghi
03:49 AM Bug report #8531 (Closed): Raster trasparency setting not saved in the project
I have a project with several 8-bit TIFF.
I set a trasparency (100%) for one value of this TIFF and I save the proje...
leolami -
06:00 AM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Minoru Akagi
05:47 AM Bug report #8532 (Feedback): Problem to print as image a big map
Can you please test with qgis 64bit?
http://trac.osgeo.org/osgeo4w/
thanks!
Giovanni Manghi
03:57 AM Bug report #8532 (Closed): Problem to print as image a big map
Hi
I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013).
I'm tring to print (as png image) a A0 composer wi...
leolami -

2013-08-29

12:35 AM Bug report #7871 (Closed): The SVG marker window has several bugs related to SVG parameters
René-Luc ReLuc
09:07 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Good catch!
Will fix that now.
Nathan Woodrow
09:02 PM Bug report #8258 (Reopened): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Great works! Thanks, Matthias and Nathan!!
Now the evaluation of the following conditional expression is True.
<pre...
Minoru Akagi
08:32 PM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
This is as fixed as we are going to be able to do.... Nathan Woodrow
08:32 PM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
This is as fixed as we are going to be able to do.... Nathan Woodrow
01:09 PM Bug report #8438: WMT-S Crashes when loading layer
I managed to get it to crash with the back buffer disabled. Jeremy Palmer
02:28 AM Bug report #8438: WMT-S Crashes when loading layer
*More info:*
The crash here occurs by using any WMS/WMS-T on my laptop following the below steps:
* add WMS and clos...
Salvatore Larosa
12:19 PM Bug report #8093 (Closed): IGNF:LAMB1, 1C, 2, 2C, 2E, 3, C, 4, 4C error message
Bug has been fixed with issue #7941: there's a typo in env.bat from Grass package.
Hien TRAN-QUANG
12:08 PM Bug report #8487: manual CRS being overwritten by QGIS
I did a pull request [[https://github.com/qgis/Quantum-GIS/pull/838]]
Now createFromProj4 only checks for same parame...
Hien TRAN-QUANG
07:39 AM Bug report #8521: DB Manager is not able to delete raster table
I think here is enough a @DROP TABLE schema.tablename@.
it also removes the references to _raster_columns_ table.
Salvatore Larosa
07:27 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Fixed the trivial ones in commit:a9c05d7
Remaining problems are:
* Postgres: Field length and precision are not corr...
Matthias Kuhn
07:01 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Matthias Kuhn wrote:
> Giovanni Manghi wrote:
> > In SL I get the error also when creating integer fields even when l...
Giovanni Manghi
06:32 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Giovanni Manghi wrote:
> In SL I get the error also when creating integer fields even when leaving 0 as width, does t...
Matthias Kuhn
06:23 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Hi Matthias
> For now: As long as you don't change them (i.e. leave them set to 0) you should not get any warnings.
...
Giovanni Manghi
05:50 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
commit:2f2e088 solves this partially
The other half of the problem is, that the [qgis] spatialite provider indicates...
Matthias Kuhn
02:25 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Giovanni Manghi wrote:
> For what it can matter I noticed that on a postgis layer there is no error just when adding ...
Giovanni Manghi
02:22 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
For what it can matter I noticed that on a postgis layer there is no error just when adding "numeric" and "decimal" f... Giovanni Manghi
04:31 AM Bug report #8480 (Closed): "The attribute could not be inserted. The name already exists in the t...
Fixed in changeset commit:"22eec4afe831f75f50b19e2c8de9082b76fce662". Matthias Kuhn
02:08 AM Bug report #8526 (Closed): complex/big geometry crashes qgis 32bit on load. Works ok on qgis 64 b...
Offending geometry here:
https://www.dropbox.com/s/nvn2xwe5b4er3xi/crash_win_qgis32.zip
Tested on master.
Giovanni Manghi

2013-08-28

12:12 AM Bug report #8438: WMT-S Crashes when loading layer
I can confirm this crash only seems to happen on layers that span the anti-meridian line. Could it be that the render... Jeremy Palmer
06:35 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
We can just do this:... Nathan Woodrow
06:29 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
You would think so but it's not the case.
We should be able to fix that by overloading the __eq__ method. Hold tight.
Nathan Woodrow
06:26 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
The evaluation of (None &#61;&#61; None) is True. But the evaluation of the following conditional expression is Fals... Minoru Akagi
04:35 AM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Will now be:... Matthias Kuhn
02:10 PM Bug report #8524: Raster tiling offset in composer output from zoomed in resampling
I stand corrected. The offset is not visible in the main map canvas, but it does show up in the composer preview in a... John Tull
02:07 PM Bug report #8524: Raster tiling offset in composer output from zoomed in resampling
I repeated printing without the affected layer (sans heat map tif layer), and the tiling offset does not occur. I can... John Tull
11:10 AM Bug report #8524 (Closed): Raster tiling offset in composer output from zoomed in resampling
The composer is creating raster artifacts that appear to be from some form of tiling in both pdf and png outputs. See... John Tull
01:31 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
I made a Pull request for this blocker : [[https://github.com/qgis/Quantum-GIS/pull/836]]
Hien TRAN-QUANG
11:56 AM Bug report #8525 (Closed): MSSQL spatial layer bug with estimated metadata
It looks like there is a bug when connecting to MSSQL databases to add a spatial layer when using estimated table par... Mike Gates
10:22 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
It seems to be also a problem not related to QGIS/SEXTANTE, in fact I can replicate issues with the enconding just us... Giovanni Manghi
06:30 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
I can't download sample file, mentioned in previous comments, but this issue not reproducible here (Linux, GDAL 1.10.... Alexander Bruy
05:12 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Giovanni Manghi wrote:
> This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on...
Giovanni Manghi
04:41 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on Windows I can always see ... Giovanni Manghi
07:55 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Yes, that fixes it.
Does it make sense to leave the option "meters" allowed in a case like this?
Matthias Kuhn
07:43 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
I can reproduce.
Apparently, when switching to 2154 (Regis initial choice), the canvas units (in project->prop->gene...
Vincent Mora
02:25 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Hi Vincent,
I tested PR778, but I can still reproduce the behavior Régis described.
# Open attached project(mapunits...
Matthias Kuhn
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:33 AM Bug report #6918: qgis:dissolve - "dissolve all" does not dissolve attributes
Giovanni Manghi wrote:
> I also cannot confirm this, tested with different datasets on both Linux and Windows. Please...
Salvatore Larosa
05:45 AM Bug report #6918 (Closed): qgis:dissolve - "dissolve all" does not dissolve attributes
Anita Graser wrote:
> It's really odd, because if I run Dissolve directly in the toolbox and select "dissolve all" NO...
Giovanni Manghi
06:07 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Pedro Venâncio wrote:
> Hi Giovanni,
>
> Yes, I agree, it really isn't a regression. However, the use of r.quantile ...
Giovanni Manghi
06:00 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Hi Giovanni,
Yes, I agree, it really isn't a regression. However, the use of r.quantile with r.recode can lead to er...
Pedro Venâncio
04:08 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Pedro Venâncio wrote:
> Hi,
>
> As suspected, we can not directly use the output of r.quantile in r.recode. See this...
Giovanni Manghi
05:49 AM Bug report #4185 (Closed): Globe and zonal statistics plugins do not properly unload
Fixed in changeset commit:"bc63fcd374f1ad4d707bbe5eadfe59222366d37c". Alexander Bruy
04:52 AM Bug report #4011: Map canvas flickers when content is dragged
Good catch! Thank you very much.
The easiest thing is to start with the environment variable QT_GRAPHICSSYSTEM=X11, s...
Matthias Kuhn
04:42 AM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
Looks like duplicate of #2218. Please check before submitting new issue. Alexander Bruy
04:42 AM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
Looks like duplicate of #2218. Please check before submitting new issue. Alexander Bruy
04:40 AM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
Seems duplicates #4011 Alexander Bruy
04:40 AM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
Seems duplicates #4011 Alexander Bruy
02:16 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if I'm not wrong when can close this again... reopen if otherwise. Giovanni Manghi

2013-08-27

01:33 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
(OTF on/off) has been added to the title of the measurement dialog in PR778. Vincent Mora
01:02 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
*OGR Provider : DateTime* Blacklisted this datatype for ShapeFile in commit:a8a1090. Please help to extend the list f... Matthias Kuhn
08:45 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
This is related to definitions of field types in the QGIS provider implementation which do not match the field type w... Matthias Kuhn
12:57 AM Bug report #8522: QGIS just shift operation, but the scale is changing, this is a bug!
If I understand, the complaint is:
In the map window, panning the map causes a change in the scale of the map.
If th...
ramon .
06:59 PM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
QGIS just shift operation, but the scale is changing, this is a bug! huaijun zuo
10:12 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
Hi,
Thank you for working on fixing this bug.
Regarding the preview: I would not change the initial symbol in the p...
Andreas Neumann
05:31 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
Before I do a pull request, here is what I have done so far :
- SVG marker fill-color and pen-outline are correctly ...
Hien TRAN-QUANG
07:00 PM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
When qgis map drag when very flicker , can optimize the solution under ? huaijun zuo
12:55 PM Bug report #8487: manual CRS being overwritten by QGIS
From what Leyan said, it seems that the error occurs when the custom CRS has too few parameters, compared to the foun... Hien TRAN-QUANG
09:47 AM Bug report #8521 (Closed): DB Manager is not able to delete raster table
When attempts to delete a raster table the following error raises:... Salvatore Larosa
09:11 AM Feature request #8520 (Open): data defined symbol levels
many styling parameters can be data defined. It would be really useful to be able to data-define symbol levels as wel... Gavin Fleming
07:59 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
> Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat ...
Benoit Laurent
07:06 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat s...
Hien TRAN-QUANG
05:36 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
> env.bat is automatically executed on start
It's time for the stupid question: when you write "on start", you mean ...
Benoit Laurent
04:35 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
so I guess we can re-close this one? Giovanni Manghi
04:30 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Hien TRAN-QUANG wrote:
> Ok, found the problem :
>
> Grass sets wrongly environment variable :
>
> in %OSGEO4W_ROOT...
Jürgen Fischer
04:27 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Grass' env.bat is called automaticaly after setting other setenv (python, gdal, and so on) and that typo overwrote th... Hien TRAN-QUANG
04:26 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Benoit Laurent wrote:
> Does executing the env.bat file after the correction you suggest solve temporarily the proble...
Jürgen Fischer
04:18 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Does executing the env.bat file after the correction you suggest solve temporarily the problem ? Is it more complicat... Benoit Laurent
03:56 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Ok, found the problem :
Grass sets wrongly environment variable :
in %OSGEO4W_ROOT%\\apps\\grass\\grass-6.4.3\\etc\...
Hien TRAN-QUANG
03:41 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Yes. Its content is:
@SET PROJ_LIB=%OSGEO4W_ROOT%\\share\\proj@
It seems ok, doesn't it ?
Benoit Laurent
03:37 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Benoit Laurent wrote:
> @os.getenv("PROJ_LIB")
> 'C:\\\\Program Files\\\\QGIS Weekly2\\\\proj'
> @
>
> That may expl...
Jürgen Fischer
03:29 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
In my case, PROJ_LIB does not point to .../share/proj but directly to .../proj which does not exist.
@os.getenv("PRO...
Benoit Laurent
03:16 AM Bug report #7941 (Reopened): IGNF:LAMBE -- not reprojecting
Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"... Jürgen Fischer
03:16 AM Bug report #7941 (Reopened): IGNF:LAMBE -- not reprojecting
Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"... Jürgen Fischer
07:41 AM Bug report #8519 (Closed): "layer stack" option in raster->miscellaneous->merge is badly named
Problem statement:
The "layer stack" option in raster->miscellaneous->merge should probably have a different name.
...
Daniel Araujo Miranda
07:39 AM Bug report #8518 (Closed): OWS tab - Abstract field of service capabilities adds additional new l...
In the OWS Server tab of the project properties one can add an abstract.
If one uses new lines in the input field, Q...
Andreas Neumann
07:28 AM Bug report #7879: Automatic creation of warped VRT is incompatible with pyramid (overview) supports
any update? Rashad Kanavath
04:00 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Bernhard Ströbl wrote:
> _fill spaces_ will be finished today and called _fill gaps_; wait for the next version of th...
Giovanni Manghi
03:38 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
_fill spaces_ will be finished today and called _fill gaps_; wait for the next version of the plugin :-)
_open hole/r...
Bernhard Ströbl
03:27 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries

> [1] http://osgeo-org.1560.x6.nabble.com/more-advanced-editing-tools-td5019552.html
I get a lot of feedback from ...
Giovanni Manghi
03:45 AM Bug report #4761 (Closed): Distance matrix: k becomes k-1 when working with one layer.
Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2". Borys Jurgiel
03:45 AM Bug report #5181 (Closed): fTools python error with option k=1 on 'Distance Matrix'
Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2". Borys Jurgiel
03:28 AM Feature request #4933: Add a "fill hole" (and "fill space") tool in the core digitizing toolbar
Bernhard Ströbl wrote:
> Hi Giovanni,
>
> I just finished work on the _fill ring_ tool in DigitizingTools plugin. Pl...
Giovanni Manghi

2013-08-26

01:50 PM Bug report #7791: QGIS master crash while printing large format (A1, A0) from map composer
Tested print with qgis-dev 1.9.0.3, 64 bit OSGeo4W from Jürgen Fischer
Print Raster A1 at 600dpi is ok.
Confirm solut...
Gerhard Spieles
05:48 AM Bug report #7791 (Closed): QGIS master crash while printing large format (A1, A0) from map composer
This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess...
Giovanni Manghi
05:48 AM Bug report #7791 (Closed): QGIS master crash while printing large format (A1, A0) from map composer
This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess...
Giovanni Manghi
05:54 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Bernhard Ströbl wrote:
> That will need C++ skills, won't it? I am afraid I am glad to get my things done in Python :...
Nathan Woodrow
05:49 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Nathan Woodrow wrote:
>
> We should just aim to make them core features, ignore the core plugin idea.
That will nee...
Bernhard Ströbl
05:46 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
I would say create a ticket called something like "Advanced editing tools" and create a new ticket for each edit tool... Nathan Woodrow
05:40 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Giovanni Manghi wrote:
> Nathan Woodrow wrote:
> > Can we reopen this. I think should be a core feature not somethin...
Bernhard Ströbl
04:19 AM Feature request #5342 (Open): Add a tool to allow continue editing of already existing line geome...
Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi...
Giovanni Manghi
04:19 AM Feature request #5342 (Open): Add a tool to allow continue editing of already existing line geome...
Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi...
Giovanni Manghi
04:16 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Can we reopen this. I think should be a core feature not something we have to get in a plugin. Nathan Woodrow
04:13 AM Feature request #5342 (Closed): Add a tool to allow continue editing of already existing line geo...
Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta...
Giovanni Manghi
04:13 AM Feature request #5342 (Closed): Add a tool to allow continue editing of already existing line geo...
Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta...
Giovanni Manghi
05:44 AM Feature request #4933: Add a "fill hole" (and "fill space") tool in the core digitizing toolbar
Hi Giovanni,
I just finished work on the _fill ring_ tool in DigitizingTools plugin. Please update to version 0.2.1
...
Bernhard Ströbl
05:39 AM Bug report #4821 (Closed): Can't print in A0 size, used to work in QGIS 1.6
I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able...
Giovanni Manghi
05:39 AM Bug report #4821 (Closed): Can't print in A0 size, used to work in QGIS 1.6
I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able...
Giovanni Manghi
04:07 AM Feature request #8517 (Feedback): Possibility to use field for auto offset (for use in conjunctio...
Giovanni Manghi
04:06 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary.
Giovanni Manghi
04:06 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary.
Giovanni Manghi
04:00 AM Bug report #8487: manual CRS being overwritten by QGIS
For me, the issue is that the proj4 definitions in SRS.db for these South African CRSs are not correct and shouldn't ... Frank Sokolic
03:52 AM Bug report #8487: manual CRS being overwritten by QGIS
Yes, on my system (Ubuntu 13.04, QGIS Master) if I create a custom CRS, e.g:
+proj=tmerc +lat_0=0 +lon_0=31 +k=1 +x_...
Frank Sokolic
03:40 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> What exactly happens?
you create the custom CRS with
+proj=tmerc +lat_0=0 +lon_0=21 +k=...
Giovanni Manghi
02:56 AM Bug report #8487: manual CRS being overwritten by QGIS
It is due to the changes I made in the custom CRS handling. Previously, it was all manual, then I changed it to make ... Leyan Ouyang
02:47 AM Bug report #8487: manual CRS being overwritten by QGIS
Giovanni Manghi wrote:
> it is a custom crs, I tested and qgis does indeed overwrite the crs string.
What exactly ha...
Jürgen Fischer
02:38 AM Bug report #8487: manual CRS being overwritten by QGIS
I've been able to solve this bug on my system (Ubuntu 13.04, QGIS master): If I open /usr/share/qgis/reources/srs.db ... Frank Sokolic
03:43 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
regis Haubourg wrote:
> same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is...
Jürgen Fischer
03:38 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if the problem is upstream I will close this ticket, please reopen if necessary. Giovanni Manghi
03:38 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if the problem is upstream I will close this ticket, please reopen if necessary. Giovanni Manghi
03:07 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is the problem. ... Regis Haubourg
02:37 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Hi, google indicates that the error seems to come from proj4 gdal. Anyone confirms? Regis Haubourg

2013-08-25

12:18 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Giovanni,
please check if the prolong line tool in digitizing tools plugin (experimental) solves this issue.
Bernhard Ströbl
12:13 AM Feature request #8517: Possibility to use field for auto offset (for use in conjunction with size...
Have you tried the latest dev versions because I'm pretty sure you can already do this.
!http://i.imgur.com/V1kDFdc....
Nathan Woodrow
12:10 AM Feature request #8517: Possibility to use field for auto offset (for use in conjunction with size...
An example of a traffic volume map in Inro Emme: !http://www.inrosoftware.com/images/emme4/standard_toolbox/bridge_tr... Jonas Malaco Filho
12:09 AM Feature request #8517 (Feedback): Possibility to use field for auto offset (for use in conjunctio...
Especially when trying to view data on roads (such as vehicle counts per hour per segment), it's already very helpful... Jonas Malaco Filho
11:29 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
I pulled the latest GIT but still got error.... Xavier Fung
04:27 PM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
I'll try again at my office but I installed tonight at home the version 1.9.0 weekly (n°33 I think it was).
With the ...
Yves NEDELEC
10:49 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
... as soon as possible, I just can't do it right now.
Thanks again.
Yves
Yves NEDELEC
10:47 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
Thank you for you quick answer...I'll write a full list of steps.
Yves
Yves NEDELEC
10:45 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
I send another view with a right editor window on a created point Yves NEDELEC
10:43 AM Bug report #8516 (Feedback): Postgis layer - Feature edit form is empty when feature is pasted fr...
Hi,
*) have you tested qgis master?
*) as the description is not very clear, can you supply a list of detailed step...
Giovanni Manghi
10:38 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Hi,
My QGis version is 1.8.0
I can populate the_geom field of geometryless records (created by a web application -a w...
Yves NEDELEC
05:58 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
From the explanations above, there seem to be valid reasons to turn off OTF, but it should only be disabled for speci... Matthias Kuhn
02:39 AM Bug report #8514 (Closed): SEXTANTE plugins stopped working
Following the rename of the plugin, its subplugins stopped working, e.g.:... Paolo Cavallini

2013-08-24

01:18 PM Bug report #8440 (Closed): Encoding problems that occur when a shapefile layer is saved as a new ...
Fixed in changeset commit:"b05abdf81d6a552570f3ecb69fac12698b279b75". Marco Hugentobler
03:29 AM Bug report #8512 (Closed): when using the batch mode cannot look for "any type" of input files
*New description:*
The *.* wildcard it is not available, the user can only look for files of 1 certain type (and ext...
Giovanni Manghi
03:21 AM Bug report #8511 (Closed): Iterations: autofill mode fills the output name in a wrong way under L...
when using the batch mode the autofill mode "with parameters values" seems that does not work as expected but just un... Giovanni Manghi

2013-08-23

05:02 PM Bug report #8482 (Closed): Public keys expired for Ubuntu repositories
Jürgen Fischer
02:52 PM Bug report #8438: WMT-S Crashes when loading layer
ok, I hadn't read your note-2 above, so crash confirmed here! Salvatore Larosa
02:43 PM Bug report #8438: WMT-S Crashes when loading layer
Try ensuring that your map canvas size is at least 850x750 Jeremy Palmer
01:58 PM Bug report #8438: WMT-S Crashes when loading layer
I don't see any crash here (debian with latest master), should I follow any particular procedure to get the crash or ... Salvatore Larosa
01:39 PM Bug report #8438: WMT-S Crashes when loading layer
ANy chance to get this looked at before 2.0 is released. Would be a pity that QGIS is released with WMT-S that crashes. Jeremy Palmer
12:44 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec...
Giovanni Manghi
12:44 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec...
Giovanni Manghi
12:42 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
with 200 tables I don't see this issue, do you think we can close the issue or at least decrease the priority? Salvatore Larosa
11:05 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
fixed in commit:c9cf74526 Jürgen Fischer
11:05 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
fixed in commit:c9cf74526 Jürgen Fischer
08:45 AM Bug report #8489: Removing a DB table from DB manager does not work
It should be fixed on master. Paolo Cavallini
10:40 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Although QGIS works properly with and without "Ignore Shapefile encoding" now, please remember there is one unresolva... Borys Jurgiel
05:40 AM Bug report #5181: fTools python error with option k=1 on 'Distance Matrix'
below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769
vinayan Parameswaran
05:39 AM Bug report #4761: Distance matrix: k becomes k-1 when working with one layer.
below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769
vinayan Parameswaran
04:44 AM Bug report #8506 (Closed): In the Label Section- option Type case - Capitalize first letter don't...
Ok,
more probably is a question of my windows.
Also I found an easy workaround defining on my dbms a view with case...
aperi2007 -
02:57 AM Bug report #8506 (Feedback): In the Label Section- option Type case - Capitalize first letter don...
just tested on qgis master and cannot confirm this issue. Giovanni Manghi
02:57 AM Bug report #8506 (Feedback): In the Label Section- option Type case - Capitalize first letter don...
just tested on qgis master and cannot confirm this issue. Giovanni Manghi
02:38 AM Bug report #8503 (Feedback): Postgis query test returns all rows, not query result
seems really duplicate of #7780 please close this. Giovanni Manghi
02:32 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in...
Giovanni Manghi
02:32 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in...
Giovanni Manghi
02:29 AM Bug report #8504 (Closed): Attribute table: QGIS crashes when field is removed (only in dual view)
Fixed in changeset commit:"6f574b41aedd9f7d00a9854bdbbd9b5209ef4e40". Matthias Kuhn
02:25 AM Feature request #8508 (Closed): QGIS Server: make nr of layers in layer cache configurable
Reminder of discussion with Marco H.
It would be good if, for larger QGIS server installations, the nr of layers to ...
Andreas Neumann

2013-08-22

01:15 AM Bug report #6892 (Closed): setDirty error when displaying DB Manager previews
Fixed in changeset commit:"d100628da299ded9edcba4dcd52051deef8fcbcb". Giuseppe Sucameli
07:05 PM Bug report #8507 (Closed): QGIS trunk failed to compile with sip 4.15
Upgraded to sip 4.15 from Arch and trunk cannot be compiled with this error message.... Xavier Fung
04:38 PM Bug report #8506 (Closed): In the Label Section- option Type case - Capitalize first letter don't...
as repeorted.
In the label properties, when choose to set the "Type case" ,
the option "Capitalize first letters" do...
aperi2007 -
04:15 PM Feature request #8505 (Feedback): Add option to suppress feature form for new features to project...
Currently, this is an app-wide option, but should be pretty straightforward to implement for project and layer proper... Larry Shaffer
01:47 PM Bug report #8504 (Closed): Attribute table: QGIS crashes when field is removed (only in dual view)
With the attribute table in dual view if I remove some field and
commit the changes (save button or toggle editing a...
Salvatore Larosa
12:22 PM Bug report #8487: manual CRS being overwritten by QGIS
Is that a custom crs or did you modify srs.db? Jürgen Fischer
11:55 AM Bug report #8379 (Closed): Symbology: Get rid of duplicate functionality "line decoration"
Fixed in changeset commit:"aaef9478004e27d3b77c356deca0091bcb86b249". Jürgen Fischer
11:51 AM Bug report #8503: Postgis query test returns all rows, not query result
John Tull wrote:
> Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, n...
Jürgen Fischer
10:44 AM Bug report #8503: Postgis query test returns all rows, not query result
Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, not using the estima... John Tull
10:02 AM Bug report #8503: Postgis query test returns all rows, not query result
Are you using the "estimated metadata" option? Jürgen Fischer
09:52 AM Bug report #8503 (Closed): Postgis query test returns all rows, not query result
For layers added from a postgis database, the query builder does not return the number of rows that a query expressio... John Tull
09:01 AM Bug report #8473 (Closed): Cannot rename layers in composer legend
The changes are fine and the patch is applied in master branch. Thanks rldhont for fixing this issue! Marco Hugentobler
06:18 AM Bug report #8473: Cannot rename layers in composer legend
Ok, in that case the ticket is assigned to me. Marco Hugentobler
06:15 AM Bug report #8473: Cannot rename layers in composer legend
I am offline until September 3, please ask someone else to apply the patch. Radim Blazek
02:29 AM Bug report #8473: Cannot rename layers in composer legend
Hi Radim,
I assigne this issue to you for reviewing my patch.
Marco wrote that you did a lot of work on composer leg...
René-Luc ReLuc
03:05 AM Feature request #8500 (Open): Add the ability to get the original GetfeatureInfo and GetLegendGra...
I've originally posted this issue here #8491
When you add a WMS layer in a QGIS project to use it in QGIS server, yo...
Nicolas Boisteault
03:02 AM Bug report #8493: "Save as Image" defaults to archaic media type
+1 this bothered me since years. Not a big deal - only annoying. BMP is really the worst choice. Andreas Neumann
03:01 AM Bug report #8499 (Closed): OWS tab - adding CRS restrictions not reliable
In Project Properties, OWS tab: when adding CRS to the CRS restrictions sometimes I only get empty entries. Try to ad... Andreas Neumann
02:44 AM Bug report #8497 (Closed): python console can't open anymore if special character has been writte...
yes, you're right, everything's ok.!!!
thanks!
Denis Rouzaud
02:31 AM Bug report #8497: python console can't open anymore if special character has been written in prev...
Hi Denis,
it looks like you have an old code in your fork, that encoding problem has already been fixed recently
ple...
Salvatore Larosa

2013-08-21

01:56 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
Hi Wiliam, thanks for updating the archive page.
I have a suggestion to change your http://www.kyngchaos.com/software...
Rik De Vreese
07:45 PM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
done. William Kyngesburye
07:45 PM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
done. William Kyngesburye
03:26 PM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
I did update the archive recently, but it looks like my host lost those changes when they moved my site to new hardwa... William Kyngesburye
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
05:15 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
Unfortunately GRASS 6.4.2 isn't longer available for Mac on Kyngchaos.com. Rik De Vreese
05:01 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
QGIS 1.8 requires GRASS 6.4.2. If you want to use GRASS 6.4.3 then you will need the QGIS 2.0 nightly build from http... rcline -
11:57 PM Bug report #8497 (Closed): python console can't open anymore if special character has been writte...
If you have an accent (é in my case) present in console_history.txt, the console can't be open and an error occurs at... Denis Rouzaud
08:57 PM Feature request #8495 (Closed): lat-long graticule on projected map
It's great having the grids available in the Composer and now in View decorations, but it's still not possible to gen... Gavin Fleming
03:40 PM Feature request #8494 (Open): Georeferencer and rectifier
*When georeferencing*: Now you see the rasterimage in a separate window but I think it would be better if the rasteri... Goran Wertwein
08:45 AM Bug report #8482: Public keys expired for Ubuntu repositories
Mathew Topper wrote:
> I have the same problem with the debian wheezy Release repository.
>
> I've imported the new ...
Jürgen Fischer
08:39 AM Bug report #8482: Public keys expired for Ubuntu repositories
I have the same problem with the debian wheezy Release repository.
I've imported the new key, but for some reason th...
Mathew Topper
07:15 AM Bug report #8493 (Closed): "Save as Image" defaults to archaic media type
If I do *File* > *Save as Image*, the default is BMP, an archaic media type that generally should only be used when m... Aren Cambre
02:32 AM Bug report #8489: Removing a DB table from DB manager does not work
Jürgen Fischer wrote:
> Jürgen Fischer wrote:
> > Talk is cheap. Fix your translation ;)
>
> @Really delete table/v...
Giovanni Manghi

2013-08-20

01:40 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
off road and wrong conclusion, sorry! Salvatore Larosa
12:26 PM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
I think of having (almost) track out the issue. :-)
I noticed that applying the following patch fix the problem:
<p...
Salvatore Larosa
02:24 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
I forgot to say....
For me the message is simply "Attribute Error: The attribute could not be added to the layer".
Salvatore Larosa
02:17 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
it looks like if precision (mPrec) is not set properly when not visible and reverting the commit:69c656e solves the i... Salvatore Larosa
01:32 AM Bug report #8490: Index shift in check geometry validity tool
The problem was identified using mapinfo file. It doesn't show up with ESRI shapefile. Olivier Monod
12:54 AM Bug report #8490 (Closed): Index shift in check geometry validity tool
Small issue with the "check geometry validity" tool in QGIS in menu "Vector=> Geometry Tools".
The tool identify geo...
Olivier Monod
01:31 AM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
System: OSX 10.6.8, QGIS 1.8.0 (with GDAL1.9), GRASS 4.6.3 (with GDAL 1.10).
(Upgraded through clean install from QGI...
Rik De Vreese
01:23 AM Bug report #8489: Removing a DB table from DB manager does not work
Jürgen Fischer wrote:
> Talk is cheap. Fix your translation ;)
@Really delete table/view %s?@ is translated as @Eli...
Jürgen Fischer
08:55 AM Bug report #8489: Removing a DB table from DB manager does not work
Paolo Cavallini wrote:
> Seem a trivial issue to fix.
Talk is cheap. Fix your translation ;)
Jürgen Fischer
08:49 AM Bug report #8489: Removing a DB table from DB manager does not work
Confirmed on Debian, with a different server Paolo Cavallini
07:59 AM Bug report #8489 (Feedback): Removing a DB table from DB manager does not work
not confirmed here too. Giovanni Manghi
07:50 AM Bug report #8489: Removing a DB table from DB manager does not work
Not confirmed here on linux, I can delete tables without any issue! Salvatore Larosa
07:20 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
Seem a trivial issue to fix.... Paolo Cavallini
09:49 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Marco Hugentobler wrote:
> The small gaps appear because of numerical problems, see geos-devel list (http://lists.osg...
Giovanni Manghi
09:47 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
Salvatore Larosa wrote:
> better solution, but the fix seems incomplete :-)
Why? QgsMimeDataUtils does the colon es...
Jürgen Fischer
09:09 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
better solution, but the fix seems incomplete :-) Salvatore Larosa
08:33 AM Bug report #8488 (Closed): "Unable to load the layer <built-in method name of QgsVectorLayer obje...
Fixed in changeset commit:"b9b8a03905e0a0482e05bec99d4f021b1f54644c". Jürgen Fischer
07:33 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
I don't know if we can fix this directly from browser code, but it look like if on Windows the shp path is wrong:
@C...
Salvatore Larosa
03:31 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
See also http://lists.osgeo.org/pipermail/qgis-developer/2013-August/027876.html Jürgen Fischer
03:28 AM Bug report #8488 (Closed): "Unable to load the layer <built-in method name of QgsVectorLayer obje...
On Windows, not on Linux (apparently). Giovanni Manghi
05:22 AM Bug report #8473: Cannot rename layers in composer legend
I have completed my patch and I proposed it through this pull request
https://github.com/qgis/Quantum-GIS/pull/824
René-Luc ReLuc

2013-08-19

04:05 PM Bug report #8482 (Reopened): Public keys expired for Ubuntu repositories
I'm not sure what was changed behind the scenes, but I'm still getting the same error when following the directions h... Michael Corey
03:57 PM Bug report #8482 (Closed): Public keys expired for Ubuntu repositories
Jürgen Fischer
01:40 PM Bug report #8487 (Closed): manual CRS being overwritten by QGIS
The new series of EPSG codes for South Africa (Hartebeesthoek/LO) with +axis=wsu might be correct for land survey dat... Gavin Fleming
10:44 AM Bug report #8473: Cannot rename layers in composer legend
Hi René, sadly I am not a C++ expert :-( so my patch might not be correct.
Anyway, I did try your patch but renaming...
Salvatore Larosa
06:23 AM Bug report #8473: Cannot rename layers in composer legend
Thanks Salvatore for your patch, but it changes the way to manage text for all the layers and not only for raster lay... René-Luc ReLuc
09:31 AM Bug report #8485 (Closed): ubuntu nightly build gpg key expired
duplicate of #8482 Giovanni Manghi
09:31 AM Bug report #8485 (Closed): ubuntu nightly build gpg key expired
duplicate of #8482 Giovanni Manghi
09:30 AM Bug report #8485 (Closed): ubuntu nightly build gpg key expired
GPG error: http://qgis.org raring Release: The following signatures were invalid: KEYEXPIRED 1376750759 KEYEXPIRED 13... Gavin Fleming
08:38 AM Bug report #8445 (Closed): Feature count isn't updated
Fixed in changeset commit:"5e4a42ebb9423906ba90d6255b8c9d10ce0e5c20". Anonymous
07:52 AM Bug report #8484 (Closed): QGIS Server: Exclude composers in OWS tab does not work
In the current QGIS server, if one uses a list of "Exclude composers" in the OWS tab, QGIS server lists only the excl... Andreas Neumann
05:02 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
The PR (20 days ago) has not been accepted nor rejected, is someone taking care of it ? Vincent Mora
04:19 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
The workaround that should be implemented #2921-23 does not seems to work. Giovanni Manghi
02:59 AM Bug report #8340 (Closed): Very slow Spatialite DB creation on qgis 2.0/master
I tested on another Windows machine and is ok. Still slow on my Linux machine, but not slow as before. So I guess tha... Giovanni Manghi
02:59 AM Bug report #8340 (Closed): Very slow Spatialite DB creation on qgis 2.0/master
I tested on another Windows machine and is ok. Still slow on my Linux machine, but not slow as before. So I guess tha... Giovanni Manghi

2013-08-18

11:58 PM Bug report #8465: Enable https for any connection where the password is submitted
Tim told me, that the certificate is available and only needs to be set up.
This is a critical vulnerability and not...
Matthias Kuhn
11:33 PM Bug report #8356: VRT file opens instantly in 1.8, not opened after 10 mins on Master
Thanks for continuing to look at the problem!
This has now fixed the problem. Vrt files with ovr files now open inst...
James Stott
03:06 AM Bug report #8356: VRT file opens instantly in 1.8, not opened after 10 mins on Master
I found that OVR files is opened neither in GDALOpen nor in GDALRasterIO but in GDALGetOverviewCount so I wrapped tha... Radim Blazek
03:01 AM Bug report #8356 (Closed): VRT file opens instantly in 1.8, not opened after 10 mins on Master
Fixed in changeset commit:"6a1a4be72223df55996bb2fb403c9515c807bc25". Radim Blazek
08:53 PM Bug report #8482 (Closed): Public keys expired for Ubuntu repositories
The Ubuntu download directions (https://issues.qgis.org/projects/quantum-gis/wiki/Download) say to use the following ... Michael Corey
02:50 PM Bug report #8475 (Closed): Program crashes when .sld is applied
Fixed in changeset commit:"6d157123ef91bb46a14207183bb00b193403330c". Jürgen Fischer
08:55 AM Bug report #8475: Program crashes when .sld is applied
I managed to track out the issue, the SLD may be loaded and the crash disappear after commenting out the following li... Salvatore Larosa
07:46 AM Bug report #8475: Program crashes when .sld is applied
Hi Daniel,
load a vector (I tested shapes and postgis) and make any categorized symbology and save it as sld. Then l...
Giovanni Manghi
07:15 AM Bug report #8475: Program crashes when .sld is applied
As described in http://www.mapserver.org/development/bugs.html :
> The most important thing when reporting a bug is ...
Daniel Vaz
02:32 PM Bug report #8473: Cannot rename layers in composer legend
For me, this issue is not limited to raster layers. (Using today's OSGeo4W nightly - code rev 4408a8b.)
In a project...
Anita Graser
11:00 AM Feature request #1656 (Closed): mapserver export plugin & raster classification
the plugin was removed from qgis. Giovanni Manghi
11:00 AM Feature request #1656 (Closed): mapserver export plugin & raster classification
the plugin was removed from qgis. Giovanni Manghi
11:00 AM Feature request #1656 (Closed): mapserver export plugin & raster classification
the plugin was removed from qgis. Giovanni Manghi
10:59 AM Feature request #545 (Closed): group-mapfile (mapserver export plugin)
the plugin was completely removed from qgis. Giovanni Manghi
10:59 AM Feature request #545 (Closed): group-mapfile (mapserver export plugin)
the plugin was completely removed from qgis. Giovanni Manghi
04:44 AM Bug report #8456: Union tool produces wrong result
Hi Daniel,
you may be right. If fact if you look for general union/intersection/etc definitions you will see that th...
Giovanni Manghi
02:31 AM Bug report #8481 (Closed): "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is n...
Add a column in a PostGIS or Spatialite vector (or Shapefile, but does not seems to happen always in this case), then... Giovanni Manghi
02:20 AM Bug report #8480 (Closed): "The attribute could not be inserted. The name already exists in the t...
Every time I try to add a "real" or "double" type of column in a PostGIS layer now QGIS returns
_The attribute could...
Giovanni Manghi

2013-08-17

03:48 PM Bug report #8475: Program crashes when .sld is applied
Daniel Vaz wrote:
> Please provide some dataset to reproduce this bug.
>
> Thanks in advance
it crashes using any d...
Salvatore Larosa
10:13 AM Bug report #8475: Program crashes when .sld is applied
Please provide some dataset to reproduce this bug.
Thanks in advance
Daniel Vaz
12:45 PM Feature request #8479 (Open): create layer from selection
New:
If you want to create a new layer based on a selection, it is impossible if the selection was spatial as there ...
Gavin Fleming
10:27 AM Bug report #6063: ftools "Convex hull(s)": wrong attributes in output
Choose Vector -> Geoprocessing -> Convex Hull -> Create a convex hull based on input field -> Choose any field -> Cli... Daniel Vaz
10:04 AM Bug report #8445: Feature count isn't updated
Please, see the pull request
https://github.com/qgis/Quantum-GIS/pull/822
Daniel Vaz

2013-08-16

01:25 AM Bug report #7430: "target crs" in georeferencer does not work

> In between these steps, are you *not* presented with a 'define CRS' dialog? It not, you may have your Options -> C...
Giovanni Manghi
02:13 PM Bug report #7430: "target crs" in georeferencer does not work
Giovanni Manghi wrote:
>
> Hi Larry, I still confirm the issue. Here the steps
>
> * new project
> * added a base m...
Larry Shaffer
03:09 AM Bug report #7430: "target crs" in georeferencer does not work
Larry Shaffer wrote:
> Hi Giovanni,
>
> I can't replicate issue here, on Mac. Which CRS dialog are you setting the C...
Giovanni Manghi
06:04 PM Bug report #8456: Union tool produces wrong result
Hi Giovanni,
I was thinking, could somebody download the two .tar.gz attached files and using arcgis do the union pr...
Daniel Vaz
06:19 AM Bug report #8456: Union tool produces wrong result
Hi Daniel,
> Is it the expected behavior if the three geometries are inside the same layer, right?
I don't know i...
Giovanni Manghi
05:33 AM Bug report #8456: Union tool produces wrong result
Ok, I already have been understood it.
Is it the expected behaviour if the three geometries are inside the same laye...
Daniel Vaz
02:36 AM Bug report #8456: Union tool produces wrong result
Daniel Vaz wrote:
> Please Giovanni, download the .tar.gz files and give it a try.
>
> Turn edit mode on and move th...
Giovanni Manghi
02:36 PM Bug report #8469: TopologyChecker crash
Perfect! Working smoothly now. Thanks for the quick fix. Cheers Rhenriques Henriques
07:38 AM Bug report #8475: Program crashes when .sld is applied
the debug message before the crash is:... Salvatore Larosa
05:48 AM Bug report #8475: Program crashes when .sld is applied
I apologize....the .dmp file is 40+ mb and would not attach John Scott
05:31 AM Bug report #8475: Program crashes when .sld is applied
confirmed here... Giovanni Manghi
05:31 AM Bug report #8475: Program crashes when .sld is applied
confirmed here... Giovanni Manghi
05:27 AM Bug report #8475 (Closed): Program crashes when .sld is applied
I have tried this in both Windows and Ubuntu
Version 1.9.0
After opening a shapefile I wanted to apply a .sld file
In...
John Scott
06:32 AM Bug report #8476: QGIS "not responding"
Of course. It's common problem with a lot of applications. Threading can sometimes take a little bit to get right w... Nathan Woodrow
06:16 AM Bug report #8476: QGIS "not responding"
It makes QGIS seem really really unstable. It threw me for a while; less technical users won't get the distinction be... Jonathan Moules
06:13 AM Bug report #8476: QGIS "not responding"
This is simply because we don't use threads in a lot of the code so the UI gets blocked while we are waiting on somet... Nathan Woodrow
06:06 AM Bug report #8476 (Closed): QGIS "not responding"
A common theme I'm noticing is that any time QGIS starts doing something, if I then try and close that dialog, QGIS w... Jonathan Moules
06:15 AM Bug report #8356 (Reopened): VRT file opens instantly in 1.8, not opened after 10 mins on Master
Tested with 4e69997 just now. This does not fix opening of VRT files. It loads fine if you open the .ovr file directl... James Stott
06:10 AM Bug report #8477 (Closed): No help for Add Oracle Table
There doesn't seem to be any help for "add Oracle Table" when the "help" button is pressed.
This is weird because Jur...
Jonathan Moules
06:00 AM Feature request #8045 (Resolved): add unit test for startup options (pluginpath, configpath)
Fixed. Pull requested : https://github.com/qgis/Quantum-GIS/pull/749 Hugo Mercier
06:00 AM Feature request #8045 (Resolved): add unit test for startup options (pluginpath, configpath)
Fixed. Pull requested : https://github.com/qgis/Quantum-GIS/pull/749 Hugo Mercier
05:18 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
Jürgen Fischer wrote:
> apparently I'm still not convinced that any regression how minor and "edgecasey" it might b...
Giovanni Manghi
04:54 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > While I agree that is an edge case I guess that the point here was...
Giovanni Manghi
04:53 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
Giovanni Manghi wrote:
> While I agree that is an edge case I guess that the point here was that previous qgis releas...
Jürgen Fischer
04:41 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
Jürgen Fischer wrote:
> I suppose the fieldname should be unique. As such it's an edge case and shouldn't be conside...
Giovanni Manghi
04:41 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
Hi Jurgen,
> I suppose the fieldname should be unique. As such it's an edge case and shouldn't be considered a bloc...
Pedro Venâncio
04:35 AM Bug report #8385: QGIS does not deal with shapefiles with two fields with the same name
I suppose the fieldname should be unique. As such it's an edge case and shouldn't be considered a blocker. Jürgen Fischer
03:43 AM Bug report #8474 (Closed): qgis master crashes when when pressing the delete or backspace keys wh...
Denis Rouzaud
02:29 AM Bug report #8474: qgis master crashes when when pressing the delete or backspace keys while digit...
https://github.com/qgis/Quantum-GIS/pull/818 Denis Rouzaud
02:28 AM Bug report #8474 (Closed): qgis master crashes when when pressing the delete or backspace keys wh...
giovanni@sibirica ~ $ qgis
Warning: loading of qt translation failed [/usr/share/qt4/translations/qt_en_US]
QGIS died...
Giovanni Manghi
02:48 AM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
Lene Fischer wrote:
> Even if the computer is restarted it doesnet work any longer. No able to perform a warp.
That'...
Giovanni Manghi
02:48 AM Bug report #8473: Cannot rename layers in composer legend
I am not fairly sure but this patch has worked for me (please anyone who knows better the composer code might reviews... Salvatore Larosa

2013-08-15

01:36 AM Bug report #8472 (Closed): Scalebar unit selection
In QGIS master aka 2.0 is already possible, you can switch the scalebar units between map units, meters and feet. Giovanni Manghi
01:36 AM Bug report #8472 (Closed): Scalebar unit selection
In QGIS master aka 2.0 is already possible, you can switch the scalebar units between map units, meters and feet. Giovanni Manghi
06:56 PM Bug report #8472 (Closed): Scalebar unit selection
As a cartographer
I would like to select scale bar units independent of base map units
because I need to provide scal...
Brylie Oxley
01:28 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
This should really be a blocker as it is a regression and make work difficult. Giovanni Manghi
01:28 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
This should really be a blocker as it is a regression and make work difficult. Giovanni Manghi
01:28 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
This should really be a blocker as it is a regression and make work difficult. Giovanni Manghi
09:05 PM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
this also applies to the target srs dialog in the Georeferencer
Open georeferencer Settings->Transformation Settings-...
ramon .
01:19 AM Bug report #8468 (Closed): Legend in Print Composer - Unable to edit Group- and subgroupe name
duplicate of #8473, closing this just because the other had a more precise description of the issue. Giovanni Manghi
01:19 AM Bug report #8468 (Closed): Legend in Print Composer - Unable to edit Group- and subgroupe name
duplicate of #8473, closing this just because the other had a more precise description of the issue. Giovanni Manghi
08:19 PM Bug report #8468: Legend in Print Composer - Unable to edit Group- and subgroupe name
yes it´s the same. Sorry for not finding that #
Regards
Lene
Lene Fischer
07:15 PM Bug report #8468 (Feedback): Legend in Print Composer - Unable to edit Group- and subgroupe name
Is by any change the same issue described here #8473 ? Giovanni Manghi
12:14 AM Bug report #8471 (Closed): (composer) Grid intervals for X and Y are swapped
Fixed in changeset commit:"4e699971c30f6da4eb7032e9e653271d454784b6". Marco Hugentobler
05:48 PM Bug report #8471: (composer) Grid intervals for X and Y are swapped
Confirmed on Linux and it is a regression. Giovanni Manghi
05:48 PM Bug report #8471: (composer) Grid intervals for X and Y are swapped
Confirmed on Linux and it is a regression. Giovanni Manghi
08:52 PM Bug report #7430: "target crs" in georeferencer does not work
Hi Giovanni,
I can't replicate issue here, on Mac. Which CRS dialog are you setting the CRS in? The one that may pop...
Larry Shaffer
08:15 PM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
The second run is on another target file but the same mask. The dialoge is closed. Even if the computer is restarted ... Lene Fischer
06:41 PM Bug report #8467 (Feedback): (OsX) Raster>Projection>Warp dies after one run
The second run is with the same mask layer? Without closing first the tool dialog? Giovanni Manghi
06:41 PM Bug report #8467 (Feedback): (OsX) Raster>Projection>Warp dies after one run
The second run is with the same mask layer? Without closing first the tool dialog? Giovanni Manghi
06:41 PM Bug report #8467 (Feedback): (OsX) Raster>Projection>Warp dies after one run
The second run is with the same mask layer? Without closing first the tool dialog? Giovanni Manghi
07:20 PM Bug report #8473: Cannot rename layers in composer legend
I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i...
Giovanni Manghi
07:20 PM Bug report #8473: Cannot rename layers in composer legend
I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i...
Giovanni Manghi
07:20 PM Bug report #8473: Cannot rename layers in composer legend
I see another issue, this time only on Linux. See Attached screenshots.
On Windows if in the composer legend there i...
Giovanni Manghi
07:14 PM Bug report #8473 (Closed): Cannot rename layers in composer legend
It seems a regression: in the print composer legend the name of rasters/wms layers cannot be changed. The dialog show... Giovanni Manghi
07:07 PM Bug report #8456: Union tool produces wrong result
Please Giovanni, download the .tar.gz files and give it a try.
Turn edit mode on and move the features of results la...
Daniel Vaz
06:24 PM Bug report #8456: Union tool produces wrong result
Hi Daniel, thanks for the effort.
Are you writing code from scratch or trying to use something already available? Fo...
Giovanni Manghi
05:50 PM Bug report #8456: Union tool produces wrong result
Please, I need some feedback on first results.
Thanks in advance.
Daniel Vaz
05:50 PM Bug report #8456: Union tool produces wrong result
Please, I need some feedback on first results.
Thanks in advance.
Daniel Vaz
06:27 PM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
Daniel Vaz wrote:
> Maybe it's a local issue like you said. I can't reproduce it here.
>
> Please if you can provide...
Giovanni Manghi
05:53 PM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
Maybe it's a local issue like you said. I can't reproduce it here.
Please if you can provide some steps to follow, I...
Daniel Vaz
05:42 PM Bug report #8433: Repeated Crash - Spatial Query tool
Still not confirmed here on the latest master on both Linux and Windows. Giovanni Manghi
03:57 AM Bug report #8433: Repeated Crash - Spatial Query tool
I can confirm that commit:d61cb25 exhibits this problem too. Jonathan Moules
05:39 PM Bug report #8422: Field Calculator doesn't work - spatiaLite
Just updated on both Linux and Windows and I cannot confirm this issue. It takes around the same amount of time as SL... Giovanni Manghi
04:30 AM Bug report #8422: Field Calculator doesn't work - spatiaLite
Now updated to d61cb25. A little more testing shows the nature of the problem.
The SL driver is taking a very long t...
Jonathan Moules
05:25 PM Bug report #8342 (Closed): WFS-T and postgis: "ERROR: null value in column "gid" violates not-nu...
Giovanni Manghi
03:59 PM Bug report #8342: WFS-T and postgis: "ERROR: null value in column "gid" violates not-null constr...
Giovanni I thought you have a primary key non sequential only with @NOT NULL@, isn't ?
In my case I have a PK with @...
Salvatore Larosa
03:39 PM Bug report #8342: WFS-T and postgis: "ERROR: null value in column "gid" violates not-null constr...
Salvatore Larosa wrote:
> Hi Giovanni, I think this also happens with PostGIS provider, by loading a PostGIS layer fr...
Giovanni Manghi
03:33 PM Bug report #8342: WFS-T and postgis: "ERROR: null value in column "gid" violates not-null constr...
Hi Giovanni, I think this also happens with PostGIS provider, by loading a PostGIS layer from "Add PostGIS layer"??
...
Salvatore Larosa
12:56 PM Bug report #8469 (Closed): TopologyChecker crash
Fixed in changeset commit:"204634240960d3c325166e652870ba7ed95fb348". Werner Macho
12:17 PM Bug report #8469: TopologyChecker crash
This patch has worked for me: https://github.com/qgis/Quantum-GIS/pull/814 Salvatore Larosa
08:53 AM Bug report #8469: TopologyChecker crash
I can confirm it here on linux! Salvatore Larosa
08:53 AM Bug report #8469: TopologyChecker crash
I can confirm it here on linux! Salvatore Larosa
08:53 AM Bug report #8469: TopologyChecker crash
I can confirm it here on linux! Salvatore Larosa
08:53 AM Bug report #8469: TopologyChecker crash
I can confirm it here on linux! Salvatore Larosa
08:12 AM Bug report #8386 (Closed): Large memory used with map units symbology at large scales
Fixed in changeset commit:"74367c5b7f182970c084da56ab728c153b7f5ab6". Marco Hugentobler
04:00 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer
Happens with d61cb25 too. It did work once and then it didn't, so it seems to be intermittent. Jonathan Moules

2013-08-14

11:31 PM Bug report #8356: VRT file opens instantly in 1.8, not opened after 10 mins on Master
Thanks Radim.
I will test once qgis-dev updates (hasn't updated for a few days now).
James Stott
09:30 PM Bug report #8471 (Closed): (composer) Grid intervals for X and Y are swapped
In the print composer, if you change the grid interval for X the Y grid interval on the map changes. If you change th... ramon .
06:58 PM Feature request #8470 (Closed): No position indicator when you add a new point with snapping
Nathan Woodrow
03:54 PM Feature request #8470: No position indicator when you add a new point with snapping
It does in the latest build
!http://i.imgur.com/CkUgAoZ.png!
Nathan Woodrow
03:42 PM Feature request #8470 (Closed): No position indicator when you add a new point with snapping
When you edit a line or polygon layer with the function of snapping, QGIS visualizes the possible location (position ... Ilya Filippov
06:04 PM Bug report #8456: Union tool produces wrong result
Hi Giovanni, follow my first results in union features on same layer.
These results show 10 features instead of 11 e...
Daniel Vaz
12:09 PM Bug report #8443: CRS for new layers
This should be an easy fix. Confirmed on Mac (again) and happens with new Spatialite layers as well (same dialog, it ... Larry Shaffer
11:50 AM Bug report #8469 (Closed): TopologyChecker crash
While using the "impressive" TopologyChecker in QGIS 2.0 DEV, QGIS crashed. This happens if we have a raster layer be... Rhenriques Henriques
08:03 AM Bug report #8468 (Closed): Legend in Print Composer - Unable to edit Group- and subgroupe name
Unable to edit Group or subgroupname in printcomposer. Lene Fischer
07:53 AM Bug report #8467 (Closed): (OsX) Raster>Projection>Warp dies after one run
An excercize with a warp and mask from a vector. Works fine a first run, but second time recieve ar errormessage.
At...
Lene Fischer
06:20 AM Bug report #8398 (Closed): Help doesn't open
Fixed in changeset commit:"58b79108ea91cc6f34e2a71987ea65c254aefe7c". Jürgen Fischer
05:02 AM Bug report #8465: Enable https for any connection where the password is submitted
It seems that there are no certificates available at the server - so no https connection possible currently. A task f... Andreas Neumann
03:18 AM Bug report #8465: Enable https for any connection where the password is submitted
This isn't a blocker for the release because it's website related and we can change that after release. Nathan Woodrow
02:51 AM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
Andreas Neumann wrote:
> For me the registration of a new SL db takes not minutes, but 2-5 seconds. But still it is s...
Giovanni Manghi
02:49 AM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
For me the registration of a new SL db takes not minutes, but 2-5 seconds. But still it is suboptimal to have seconds... Andreas Neumann

2013-08-13

01:59 AM Bug report #7933: label item rotation in qgis composer should be improved
This seems to be caused by the same bug as: #8466
Richard Duivenvoorde
01:54 AM Bug report #8466 (Closed): wrong resizing when rotating composer shapes (composer)
When you rotate a shape (like triangle) in composer it size changes, while the size should NOT change.
Looking into ...
Richard Duivenvoorde
01:51 AM Feature request #2867 (Closed): Label rotation in composer
I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte... Richard Duivenvoorde
01:51 AM Feature request #2867 (Closed): Label rotation in composer
I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte... Richard Duivenvoorde
01:51 AM Feature request #2867 (Closed): Label rotation in composer
I think rotation of most composer items are implemented now. Or at least I can rotate a label now via the normal inte... Richard Duivenvoorde
12:47 AM Bug report #8398: Help doesn't open
Works fine for me. However, some of the help content is very outdated. E.g. the help for layer properties talks about... Andreas Neumann
02:55 AM Bug report #8398: Help doesn't open
It seems like in a bout of stupidity, our corporate network has now blocked the download of .exe files so I can't eve... Jonathan Moules
12:21 AM Bug report #6835: Label with "using perimeter" option looses label and do not work as expected
I'm also missing the "Line direction symbol" for perimeter labels, so I'd welcome threating polygon perimeters fully ... Sandro Santilli
10:10 AM Bug report #4586: Raster calculator: fails if file name has spaces
Now raster names are surrounded by "" when added by double clicking, so the expression works. If they are written by ... Paolo Cavallini
08:34 AM Bug report #8399 (Closed): Could not resolve property
Fixed in changeset commit:"0607202004ae041b60152da98628fd96f41c7c35". Salvatore Larosa
07:22 AM Bug report #8399: Could not resolve property
https://github.com/qgis/Quantum-GIS/pull/806 Denis Rouzaud
02:55 AM Bug report #8462: problems with rubberbands
It should be fixed for add feature. I could not reproduce it with split feature tool. Radim Blazek
02:53 AM Bug report #8462 (Closed): problems with rubberbands
Fixed in changeset commit:"db07f2f90c4872a5e42bebf13d40f37bcde41922". Radim Blazek
02:25 AM Bug report #8461 (Closed): Viewport resize behavior asymmetric
Giovanni Manghi
02:25 AM Bug report #8461: Viewport resize behavior asymmetric
Yep, duplicate Sandro Santilli
02:15 AM Bug report #8461 (Feedback): Viewport resize behavior asymmetric
duplicate of #1449 ? Giovanni Manghi
02:24 AM Bug report #1449: The map and overview canvas resizes incorrectly
I confirm it's stll not fixed, see #8461 Sandro Santilli
02:01 AM Bug report #6323 (Closed): "marker on every vertex" misses vertices
Sandro Santilli wrote:
> I confirm the bug with 1.8.0-Lisboa.
> It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe...
Giovanni Manghi
02:01 AM Bug report #6323 (Closed): "marker on every vertex" misses vertices
Sandro Santilli wrote:
> I confirm the bug with 1.8.0-Lisboa.
> It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe...
Giovanni Manghi
02:00 AM Feature request #6776: Allow multiple parallel classifications for different visual variables
The rule-based renderer, the data-defined symbology and expressions certainly help to cover these cases. But it is st... Andreas Neumann

2013-08-12

01:44 AM Bug report #4586 (Feedback): Raster calculator: fails if file name has spaces
This one should be fixed 2 weeks ago commit:ba86804
Please test and report back.
Marco Hugentobler
01:34 AM Feature request #7581: raster calculator really needs support for conditional statements (to allo...
Probably related to #4476 Alexander Bruy
01:32 AM Bug report #7206 (Closed): Raster Calculator doesn't work with spaces in layer names
Duplicates #4586 Alexander Bruy
01:32 AM Bug report #7206 (Closed): Raster Calculator doesn't work with spaces in layer names
Duplicates #4586 Alexander Bruy
01:22 AM Bug report #8398: Help doesn't open
It worked !
I installed latest weekly in @C:\\Temp\\QGIS_Weekly@
Rémi Bovard
01:40 PM Bug report #8398: Help doesn't open
Jonathan Moules wrote:
> I can't install the master, only the weeklies. I guess I can do that tomorrow as it hasn't b...
Salvatore Larosa
03:04 AM Bug report #8398: Help doesn't open
I can't install the master, only the weeklies. I guess I can do that tomorrow as it hasn't been built yet. Jonathan Moules
12:25 AM Bug report #8356 (Closed): VRT file opens instantly in 1.8, not opened after 10 mins on Master
Fixed in changeset commit:"83d15a51ff279e31c81ceb56fcc83a153ef82327". Radim Blazek
12:21 AM Bug report #8465 (Closed): Enable https for any connection where the password is submitted
Enable encryption for any http connection, where the password gets submitted (like hub.qgis.org)
Adding this as a bl...
Matthias Kuhn
10:47 PM Feature request #8464 (Closed): Save query in Select by Expression
In the Select by Expression the dialog, the expresseion field always get cleared after running a selection.
Is it pos...
Lene Fischer
03:51 PM Bug report #8463 (Closed): problems with rubberbands2
Fixed in changeset commit:"d517461360f03ae4d2935343aa83d17cec02f01f". Nathan Woodrow
02:02 PM Bug report #8463 (Closed): problems with rubberbands2
Is it possible to restore trasparency of rubberbands for move/rotate merge features and edit labels tools? I don't kn... Alessandro Ciali
01:57 PM Bug report #8462 (Closed): problems with rubberbands
when drawing a rubberband (with add feature or split feature tools) if you delete a vertex, the last vertex is not re... Alessandro Ciali
12:44 PM Feature request #8387: Warn users when saving projects that contain memory/scratch layers
I see Nathan point about wanting the emptied layers in the project. Personally I never used them as "drawing canvasse... Sandro Santilli
12:39 PM Bug report #6323: "marker on every vertex" misses vertices
I confirm the bug with 1.8.0-Lisboa.
It's fixed in 1.9.0-alpha as of Aug, 21 2013 (58477fe)
There's no 1.8.1 target t...
Sandro Santilli
12:34 PM Bug report #8461 (Closed): Viewport resize behavior asymmetric
Enlarging the viewport size retains map scale and exposes a bigger geographical extent while shrinking the viewport s... Sandro Santilli
10:49 AM Bug report #8460 (Closed): Problem with GPS USB win7 64bits
Hi, to ask questions please use the users or developers mailing list, the #qgis IRC channel or gis.stackexchange.com
...
Giovanni Manghi
10:49 AM Bug report #8460 (Closed): Problem with GPS USB win7 64bits
Hi, to ask questions please use the users or developers mailing list, the #qgis IRC channel or gis.stackexchange.com
...
Giovanni Manghi
10:43 AM Bug report #8460 (Closed): Problem with GPS USB win7 64bits
Hola, tenemos problemas con un gps con conexión USB al PC, tengo instalado QGIS 1.8 en Windows 7 64 bits, el tema es ... ferjuma ferjuma
09:30 AM Bug report #8458: Spatial Query - Create layer> Uneditable new layer
Lene Fischer wrote:
> This is a mixup of metafors -
> For "normal" users which I have in the classroom all said
> "Cr...
Giovanni Manghi
09:27 AM Bug report #8458: Spatial Query - Create layer> Uneditable new layer
This is a mixup of metafors -
For "normal" users - which I have in the classroom all said-
"Create a new layer" means...
Lene Fischer
07:45 AM Bug report #8458: Spatial Query - Create layer> Uneditable new layer
Giovanni Manghi wrote:
> The layer that the tool creates isn't a new layer, is a copy of the one where the selection ...
Jürgen Fischer
07:00 AM Bug report #8458 (Closed): Spatial Query - Create layer> Uneditable new layer
The layer that the tool creates isn't a new layer, is a copy of the one where the selection is made with a filter app... Giovanni Manghi
07:00 AM Bug report #8458 (Closed): Spatial Query - Create layer> Uneditable new layer
The layer that the tool creates isn't a new layer, is a copy of the one where the selection is made with a filter app... Giovanni Manghi
06:46 AM Bug report #8458 (Closed): Spatial Query - Create layer> Uneditable new layer
I use Spatial Query
After performing the query the option Create Layer with selection-button.
It works - but the new ...
Lene Fischer
08:59 AM Bug report #8459 (Closed): Add Part on NULL geometry
I have a PostGIS table with some polygons having NULL geometry. The rows are correctly displayed in the attribute tab... Jean BAri
07:14 AM Bug report #8209: Print as raster doesn't work on OsX
rcline - wrote:
> Given there is a good alternative to get quality output when doing blends, I would not consider the...
Giovanni Manghi
05:14 AM Bug report #8457 (Closed): $length fails silently for polygons
In that case it's the same as #8369 Nathan Woodrow
05:14 AM Bug report #8457 (Closed): $length fails silently for polygons
In that case it's the same as #8369 Nathan Woodrow
05:12 AM Bug report #8457: $length fails silently for polygons
we can rename/rephrase the ticket anyway as a feature request like "make the FC handle better some cases" Giovanni Manghi
05:10 AM Bug report #8457: $length fails silently for polygons
I'm not sure it should be renamed to that as it's not unique to length.
If I try "$x" and "$y" with a polygon they a...
Jonathan Moules
05:04 AM Bug report #8457 (Feedback): $length fails silently for polygons
Can we change this to something like "add a warning when using the $length function with polygons"? Giovanni Manghi
05:04 AM Bug report #8457 (Feedback): $length fails silently for polygons
Can we change this to something like "add a warning when using the $length function with polygons"? Giovanni Manghi
04:58 AM Bug report #8457: $length fails silently for polygons
Ah, Ok.
I think outside of the Operator functions, the user likely isn't going to care about the difference between N...
Jonathan Moules
04:50 AM Bug report #8457: $length fails silently for polygons
We have had this talk before. It sounds great but like you said NULL != 0 or '' so we are not going to treat NULL as... Nathan Woodrow
04:47 AM Bug report #8457: $length fails silently for polygons
Also field calculator does the exact same thing, so it's not labelling specific.
Nathan Woodrow wrote:
> $legnth is ...
Jonathan Moules
04:44 AM Bug report #8457: $length fails silently for polygons
$legnth is returning NULL. String + NULL = NULL. Nathan Woodrow
04:43 AM Bug report #8457 (Closed): $length fails silently for polygons
I have a polygon. If I label it with the following it works fine.
@ 'polygon' || $area@
However, if I change it to ...
Jonathan Moules
05:07 AM Bug report #8456: Union tool produces wrong result
Daniel Vaz wrote:
> I will work on this bug. (just for avoid double work)
>
> I will take into account your consider...
Giovanni Manghi
05:04 AM Bug report #8456: Union tool produces wrong result
I will work on this bug. (just for avoid double work)
I will take into account your considerations Giovanni.
Thank...
Daniel Vaz
04:30 AM Bug report #8456: Union tool produces wrong result
it is also necessary to review the resulting attributes -> it would necessary to give a look to all the discussions i... Giovanni Manghi
04:23 AM Bug report #8456 (Closed): Union tool produces wrong result
Union tool from fTools (and also SEXTANTE) produces wrong result. If we look at an accepted definition of "union" (ht... Alexander Bruy
04:47 AM Bug report #8442 (Closed): python error when copying errors with ctrl-c in "check geometry validity"
Fixed in changeset commit:"7b57676f02fefac2aa764528204d5fb09720c57a". Alexander Bruy
04:36 AM Bug report #8442 (In Progress): python error when copying errors with ctrl-c in "check geometry v...
This also happens with Basic statistics tool Alexander Bruy
04:36 AM Bug report #8442 (In Progress): python error when copying errors with ctrl-c in "check geometry v...
This also happens with Basic statistics tool Alexander Bruy
04:47 AM Bug report #8452 (Closed): Unicode characters in plugin repository titles result in Python error
Fixed in changeset commit:"ec2992e8f9883b3e794c7fe95ce0d6aaa47785ef". Alexander Bruy
04:26 AM Bug report #7708 (Closed): Union produces the wrong output (plus progress bar does not move, too ...
Closing this issue because commit:3e25f11845 "fixes" this tool (it produces now same result as 1.8 and progressbar wo... Alexander Bruy
04:26 AM Bug report #7708 (Closed): Union produces the wrong output (plus progress bar does not move, too ...
Closing this issue because commit:3e25f11845 "fixes" this tool (it produces now same result as 1.8 and progressbar wo... Alexander Bruy
03:12 AM Feature request #8180: Encryption of Passwords in qgs files
Matthias Kuhn wrote:
> The AES encrypted password (In the project file) + the encryption password (which will have to...
Jonathan Moules
02:03 AM Feature request #8180: Encryption of Passwords in qgs files
The AES encrypted password (In the project file) + the encryption password (which will have to be given to the users,... Matthias Kuhn

2013-08-11

11:33 PM Feature request #8454 (Open): QgsFields: Implement container methods
Concerns C++ and Python.
C++: Implement the iterator and const_iterator things, so we can do e.g.:...
Matthias Kuhn
07:27 PM Bug report #8453 (Closed): QgsExpression::Interval::fromString() doesn't fully support plural for...
QgsExpression::Interval::fromString() found in src/core/qgsexpression.cpp currently supports localized intervals, but... artfwo -
06:43 PM Bug report #8452: Unicode characters in plugin repository titles result in Python error
The (same?) bug occurs when the repository is deleted. artfwo -
06:40 PM Bug report #8452 (Closed): Unicode characters in plugin repository titles result in Python error
This bug is related to #8410 but occurs under different conditions in the current daily build (git20130810). It can b... artfwo -
05:36 PM Bug report #8451 (Closed): "Transform error caught: forward transform of..." while editing on qgi...
While editing on qgis master I'm getting a lot of errors of the type
@Transform error caught: forward transform of
...
Giovanni Manghi
05:22 PM Feature request #7012 (Open): Editable unique value should use QCombobox with completer
Giovanni Manghi
05:22 PM Feature request #7012: Editable unique value should use QCombobox with completer
Can I get this reopened. Closed the wrong bug by mistake. Nathan Woodrow
05:20 PM Feature request #7012 (Closed): Editable unique value should use QCombobox with completer
Fixed in changeset commit:"df0d690cd08e835cd49e7c6e9ef168cc157e38b8". Nathan Woodrow
05:22 PM Bug report #8446 (Closed): Legend in Print Composer - Layername in default empty symbology class
Fixed in changeset commit:df0d690cd08e835cd49e7c6e9ef168cc157e38b8 Nathan Woodrow
05:22 PM Bug report #8446 (Closed): Legend in Print Composer - Layername in default empty symbology class
Fixed in changeset commit:df0d690cd08e835cd49e7c6e9ef168cc157e38b8 Nathan Woodrow
05:12 PM Bug report #8446: Legend in Print Composer - Layername in default empty symbology class
I have fixed the bug of using the layer name for anything but single symbols. However there is a side effect of not ... Nathan Woodrow
04:48 PM Bug report #8446: Legend in Print Composer - Layername in default empty symbology class
This is because of:
QString text = symbolItem->text();
if ( text.isEmpty() )
{
// Use layer label, used for ...
Nathan Woodrow
03:25 PM Bug report #8446: Legend in Print Composer - Layername in default empty symbology class
Confirmed on Linux.
This is a regression since 1.8
In the legend item properties the layername is not associated wi...
Giovanni Manghi
03:25 PM Bug report #8446: Legend in Print Composer - Layername in default empty symbology class
Confirmed on Linux.
This is a regression since 1.8
In the legend item properties the layername is not associated wi...
Giovanni Manghi
12:56 PM Bug report #8446 (Closed): Legend in Print Composer - Layername in default empty symbology class
I have a layer which is categorized. In the *layer>legend* there is an empty symbology class - as always.
When I inse...
Lene Fischer
04:36 PM Bug report #8398: Help doesn't open
Can we get an update on this Jonathan using the latest master. Nathan Woodrow
04:34 PM Bug report #8448: Avoid intersection fails with different CRS
I have tested also 1.7.4 and 1.7.0 and it worked as already described, so I guess is unlikely a regression. So I'm no... Giovanni Manghi
01:42 PM Bug report #8448 (Feedback): Avoid intersection fails with different CRS
Hi Lene, I tested on both Windows and Linux and I confirm that avoid intersection does not work of layers have differ... Giovanni Manghi
01:42 PM Bug report #8448 (Feedback): Avoid intersection fails with different CRS
Hi Lene, I tested on both Windows and Linux and I confirm that avoid intersection does not work of layers have differ... Giovanni Manghi
01:01 PM Bug report #8448 (Closed): Avoid intersection fails with different CRS
Trying to digitize with two - or more - layers. Snapping and Avoid intersection doesn´t work if there is different ... Lene Fischer
04:33 PM Bug report #8379: Symbology: Get rid of duplicate functionality "line decoration"
Would be handy to get rid of but not a blocker IMO. Nathan Woodrow
03:36 PM Bug report #8450: Selected item not marked blue in attribute window
But I activate and focus by *Move selection to top*
Regards
Lene
Lene Fischer
03:34 PM Bug report #8450: Selected item not marked blue in attribute window
This is because Windows has a different style for Active with Focus and Active without Focus. If you click in the at... Nathan Woodrow
03:23 PM Bug report #8450: Selected item not marked blue in attribute window
If I select manually in the attribute window it turns blue as usual. So the difference confuse.
Please see in this ...
Lene Fischer
03:18 PM Bug report #8450: Selected item not marked blue in attribute window
In your case are (light) grey, as in my case (on Windows). It depends on the desktop theme you are using. Giovanni Manghi
03:09 PM Bug report #8450 (Feedback): Selected item not marked blue in attribute window
I also does not confirm on Linux. Giovanni Manghi
03:09 PM Bug report #8450 (Feedback): Selected item not marked blue in attribute window
I also does not confirm on Linux. Giovanni Manghi
03:05 PM Bug report #8450: Selected item not marked blue in attribute window
Not confirmed here !http://i.imgur.com/F8Pf6SU.png! Nathan Woodrow
03:03 PM Bug report #8450 (Closed): Selected item not marked blue in attribute window
WHen a object is selected with ex. *select single feature tool* and I open the attritbute window the selected item is... Lene Fischer
03:14 PM Bug report #8445: Feature count isn't updated
Confirmed on Linux. I would expect anyway to have the count updated just after saving edits. Opening the vector prope... Giovanni Manghi
12:53 PM Bug report #8445 (Closed): Feature count isn't updated
In Layer>Show feature count the numbers of features is shown in the legend.
But after digitizing there is no update o...
Lene Fischer
03:11 PM Bug report #8447 (Closed): Label $area and field
The format option doesn't work on anything but pure numbers being returned. Once you use || you are returning a strin... Nathan Woodrow
03:11 PM Bug report #8447 (Closed): Label $area and field
The format option doesn't work on anything but pure numbers being returned. Once you use || you are returning a strin... Nathan Woodrow
03:08 PM Bug report #8447: Label $area and field
I had once reported the same issue here #6981 and it was closed because in the expression builder there are now numbe... Giovanni Manghi
03:08 PM Bug report #8447: Label $area and field
I had once reported the same issue here #6981 and it was closed because in the expression builder there are now numbe... Giovanni Manghi
12:59 PM Bug report #8447 (Closed): Label $area and field
I´m trying to set a label with the function $area. This works fine. Also with formating ex 1 decimal.
With $area || ...
Lene Fischer
01:43 PM Bug report #8444 (Closed): CRS for new layers
duplicate of #8443 Giovanni Manghi
01:43 PM Bug report #8444 (Closed): CRS for new layers
duplicate of #8443 Giovanni Manghi
12:49 PM Bug report #8444 (Closed): CRS for new layers
Master ver 31
In Settings>Options>CRS I´ve set up a Use default CRS displayed below, and choosen EPSG:25832 - ETRS8...
Lene Fischer
01:07 PM Bug report #8449 (Closed): images/icons in printcomposer - fail abort
Hi Lene,
this issue was solves recently, please try with qgis master installed with osgeo4w so you can test the late...
Giovanni Manghi
01:07 PM Bug report #8449 (Closed): images/icons in printcomposer - fail abort
Hi Lene,
this issue was solves recently, please try with qgis master installed with osgeo4w so you can test the late...
Giovanni Manghi
01:05 PM Bug report #8449 (Closed): images/icons in printcomposer - fail abort
Trying to insert an image (north arrow) in the print composer. Normally a set of icons is shown, but now I get nothin... Lene Fischer
12:49 PM Bug report #8443 (Closed): CRS for new layers
Master ver 31
In Settings>Options>CRS I´ve set up a Use default CRS displayed below, and choosen EPSG:25832 - ETRS8...
Lene Fischer
10:39 AM Feature request #8439: Scipy and QGIS integration failures
THank you very much... Claudios Hakuna
04:17 AM Bug report #8442 (Closed): python error when copying errors with ctrl-c in "check geometry validity"
Run the tool on a vector with errors, select an error and then ctrl-c
An error has occured while executing Python co...
Giovanni Manghi
03:29 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
I am fixing #7012 soon so that will fix this also. Nathan Woodrow
03:29 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
This is already possible but due to #7012 it doesn't work correctly when you don't have a prebuilt list.
Nathan Woodrow
03:23 AM Feature request #8441 (Closed): Add dropdown list (or autocomplete) of previous entries to new fe...
Hey,
i am digitizing and have to create a great number of new vector features. With each new feature i have to enter...
Martin Jung
02:52 AM Bug report #8438: WMT-S Crashes when loading layer
With the new url in #8438-1 I also get the crash. Giovanni Manghi

2013-08-10

05:52 PM Bug report #8440: Encoding problems that occur when a shapefile layer is saved as a new shapefile
pull request to fix this issue: https://github.com/qgis/Quantum-GIS/pull/800 Minoru Akagi
05:22 PM Bug report #8440 (Closed): Encoding problems that occur when a shapefile layer is saved as a new ...
The problems occur only in case that the "Ignore shapefile encoding declaration" option is not checked. I guess that ... Minoru Akagi
01:41 PM Bug report #8438: WMT-S Crashes when loading layer
I'm definitely still getting a crash. I'm using qgis ubuntugis nightly builds for precise as well as a built from sou... Jeremy Palmer
04:17 AM Bug report #8438 (Feedback): WMT-S Crashes when loading layer
tested this
http://data.linz.govt.nz/services;key=b39ccd76408f48d9bcbbcc4817432518/wmts/1.0.0/layer/772/WMTSCapabil...
Giovanni Manghi
06:00 AM Feature request #8439 (Closed): Scipy and QGIS integration failures
Dear Claudios,
the bug tracker is suited to report issues, not to make questions. Use the users/developers mailing l...
Giovanni Manghi
06:00 AM Feature request #8439 (Closed): Scipy and QGIS integration failures
Dear Claudios,
the bug tracker is suited to report issues, not to make questions. Use the users/developers mailing l...
Giovanni Manghi
05:54 AM Feature request #8439 (Closed): Scipy and QGIS integration failures
I installed QGIS 1.8.0 using the stand alone package and i have been having problems installing some plugin. I get th... Claudios Hakuna
05:02 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
Olá George
> I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and ...
Giovanni Manghi
04:36 AM Bug report #8434: join by spatial location locks up QGIS
Jonathan Moules wrote:
> There are ~14,000 null geometries, but these don't appear to qualify as a "issue".
they ar...
Giovanni Manghi
04:34 AM Bug report #8434 (Open): join by spatial location locks up QGIS
Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ...
Giovanni Manghi
04:34 AM Bug report #8434 (Open): join by spatial location locks up QGIS
Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ...
Giovanni Manghi
04:34 AM Bug report #8434 (Open): join by spatial location locks up QGIS
Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ...
Giovanni Manghi
04:34 AM Bug report #8434 (Open): join by spatial location locks up QGIS
Jonathan Moules wrote:
> See attached screenshot, this is indeed a crash. After several minutes of waiting, a little ...
Giovanni Manghi

2013-08-09

04:18 PM Feature request #8292: Support GetFeatureInfo for WMTS
Here a URL to a public service:
http://data.linz.govt.nz/services;key=<my_key>/wmts/1.0.0/layer/772/WMTSCapabilities...
Jeremy Palmer
04:14 PM Bug report #8438 (Closed): WMT-S Crashes when loading layer
Crashes on both Ubuntu 12.04 and windows 7 running master build (2087de1). I tried giving the app a quick debug but i... Jeremy Palmer
03:01 PM Bug report #6642: fTools: the option to load a layer after analyses should be on by default
Same issue in the option "Layer"/"Save selection as Vector file...".
The option to add the layer to the project is t...
Pieter Roggemans
07:36 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi...
George Rodrigues da Cunha Silva
07:36 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi...
George Rodrigues da Cunha Silva
07:36 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
Hi Giovanni,
I can reproduce your bug with Quantum GIS 1.8 and Postgis 2.0 on Windows and Linux (ubuntu 13.04 and wi...
George Rodrigues da Cunha Silva
04:54 AM Bug report #8434: join by spatial location locks up QGIS
See attached screenshot, this is indeed a crash. After several minutes of waiting, a little black box appears in the ... Jonathan Moules
04:32 AM Bug report #8434: join by spatial location locks up QGIS
Apologies I attached the wrong file. :-(
Giovanni Manghi wrote:
> You are right, using the SL vector "processed" as ...
Jonathan Moules
04:34 AM Feature request #5301 (Closed): Save as image do not export text annotations
is fixed at least in qgis 2.0 Giovanni Manghi
04:34 AM Feature request #5301 (Closed): Save as image do not export text annotations
is fixed at least in qgis 2.0 Giovanni Manghi
04:25 AM Feature request #2364 (Closed): Font Color for grid annotations in print composer
implemented in qgis 2.0 Giovanni Manghi
04:25 AM Feature request #2364 (Closed): Font Color for grid annotations in print composer
implemented in qgis 2.0 Giovanni Manghi
04:25 AM Feature request #2364 (Closed): Font Color for grid annotations in print composer
implemented in qgis 2.0 Giovanni Manghi
04:25 AM Feature request #2364 (Closed): Font Color for grid annotations in print composer
implemented in qgis 2.0 Giovanni Manghi
04:21 AM Feature request #8420 (Closed): Add a "add only classes of visible features" to legend in print c...
duplicate of #3121 Giovanni Manghi
04:21 AM Feature request #8420 (Closed): Add a "add only classes of visible features" to legend in print c...
duplicate of #3121 Giovanni Manghi
04:20 AM Bug report #8423: QGIS interface stops updating
This seems to be a Qt thing on some Windows machines. I get it here too. Nathan Woodrow
04:19 AM Bug report #8423: QGIS interface stops updating
The graphics card is two "NVIDIA NVS 310".
Driver: NVIDIA Version 311.35
I've not seen this with any other applicati...
Jonathan Moules
04:17 AM Feature request #6339 (Closed): No way to select CSV file encoding in DelimitedText Plugin
Giovanni Manghi
04:07 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
regis Haubourg wrote:
> Anyway, csv and carriage return will always be a mess since there is no CSV norm..
Then I wo...
Giovanni Manghi
03:11 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Those with quotes are cells that contain carriage returns it seems.
Carriage returns an csv are really a mess. After...
Regis Haubourg
02:54 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Just used Office 2011. Same problem when saved as .. "csv "
Re-tried with a save as " windows _ csv". This time QGIS ...
Arthur Vignacq
02:00 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Arthur Vignacq wrote:
> The weird thing, is that QGIS 1.8, perfectly read this same file with the possible mistake of...
Giovanni Manghi

2013-08-08

01:54 AM Bug report #8437 (Closed): db manager don't load esri personal geodb to postgis single feature in...
I'm using the dev version in windows 1.9.0 (1.9.0-Master Revisione codice QGIS d821bcc)
loading a polyline feature fr...
Pietro Rossin
01:36 AM Bug report #8436 (Reopened): Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdial...
Reopened: Still missing translations... Matthias Kuhn
01:36 AM Bug report #8436 (Reopened): Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdial...
Reopened: Still missing translations... Matthias Kuhn
01:31 AM Bug report #8436 (Closed): Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdialog...
Fixed in commit:6bbb8dc
Thank you
Matthias Kuhn
01:31 AM Bug report #8436 (Closed): Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdialog...
Fixed in commit:6bbb8dc
Thank you
Matthias Kuhn
01:07 AM Bug report #8436: Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdialog.cpp
Please update your pull request according to the discussion there and squash it down to a commit with the message inc... Matthias Kuhn
07:51 PM Bug report #8436 (Closed): Untranslatable strings in src/gui/symbology-ng/qgsstylev2managerdialog...
GUI labels and group names are untranslatable in file
src/gui/symbology-ng/qgsstylev2managerdialog.cpp
This is a com...
artfwo -
01:11 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
The weird thing, is that QGIS 1.8, perfectly read this same file with the possible mistake office mac made.
I'll try...
Arthur Vignacq
11:36 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
The issue seems to be this one
http://developmentality.wordpress.com/2010/12/06/excel-2008-for-macs-csv-bug/
giovan...
Giovanni Manghi
02:56 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
regis Haubourg wrote:
> Your field nom as sometime text delimiters, sometimes not. Could you try to export csv with a...
Giovanni Manghi
02:34 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Your field nom as sometime text delimiters, sometimes not. Could you try to export csv with another tool and see if i... Regis Haubourg
02:05 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
please see attached file Arthur Vignacq
06:42 PM Bug report #8403 (Closed): Toggling layer visibility to off doesn't work if you highlight a diffe...
Same results as the other render bug - could just be a plugin from QGIS 1.8 because problem is not showing up in mast... Donovan Cameron
06:40 PM Bug report #8402 (Closed): Selecting/Activating a layer in the layer list causes canvas to redraw
Looks like it could of been from a plugin on that Windows PC running QGIS 1.8 because the re-render problem is not pr... Donovan Cameron
04:33 PM Bug report #8395 (Closed): split features is not working properly
Fixed in changeset commit:"d3142f6d88db49f46e2e3fd87dd3a583ed6776b3". Nathan Woodrow
05:41 AM Bug report #8395: split features is not working properly
https://github.com/qgis/Quantum-GIS/pull/798 Denis Rouzaud
11:25 AM Bug report #8423: QGIS interface stops updating
I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers... Giovanni Manghi
11:25 AM Bug report #8423: QGIS interface stops updating
I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers... Giovanni Manghi
11:25 AM Bug report #8423: QGIS interface stops updating
I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers... Giovanni Manghi
11:25 AM Bug report #8423: QGIS interface stops updating
I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers... Giovanni Manghi
11:25 AM Bug report #8423: QGIS interface stops updating
I have seen it too but just on Windows and in a less severe way (see attached screencast), maybe this a video drivers... Giovanni Manghi
11:06 AM Feature request #5546: Add a warning when vector fields/values are above the limits
see also #8430 Giovanni Manghi
11:06 AM Bug report #8430 (Closed): Field Calculator - area failing - overflowing
duplicate of #5546 Giovanni Manghi
11:06 AM Bug report #8430 (Closed): Field Calculator - area failing - overflowing
duplicate of #5546 Giovanni Manghi
05:13 AM Bug report #8430: Field Calculator - area failing - overflowing
As a follow on and having discovered #8431 - it turns out that the data is correct after the calculation - QGIS shows... Jonathan Moules
05:06 AM Bug report #8430 (Closed): Field Calculator - area failing - overflowing
See attached.
I tried to use QGIS to calculate the areas of things, but as you can see in the dec2 (decimal size 19) ...
Jonathan Moules
10:24 AM Bug report #8431 (Closed): Field Calculator ignoring "output field type"
After you save the values are saved as expected. There was a refreshing issue after saving that was fixed today, see:... Giovanni Manghi
10:24 AM Bug report #8431 (Closed): Field Calculator ignoring "output field type"
After you save the values are saved as expected. There was a refreshing issue after saving that was fixed today, see:... Giovanni Manghi
05:10 AM Bug report #8431 (Closed): Field Calculator ignoring "output field type"
If I do a area calculation and have it specified as "whole number (integer)", the output I see in the attribute table... Jonathan Moules
10:13 AM Bug report #8434: join by spatial location locks up QGIS
You are right, using the SL vector "processed" as target layer and "hex_1k" as join layer with the option "keep all t... Giovanni Manghi
10:13 AM Bug report #8434: join by spatial location locks up QGIS
You are right, using the SL vector "processed" as target layer and "hex_1k" as join layer with the option "keep all t... Giovanni Manghi
08:17 AM Bug report #8434: join by spatial location locks up QGIS
It is supposed to try the join with the shapefile added here? #8433
If yes then I tested on qgis master/osgeo4w and ...
Giovanni Manghi
08:00 AM Bug report #8434 (Feedback): join by spatial location locks up QGIS
in the attached dataset there is only 1 layer. There is also no screenshot with settings used. Giovanni Manghi
07:47 AM Bug report #8434 (Closed): join by spatial location locks up QGIS
See attached for data and screenshot of settings used for "join attributes by location" tool.
It gets to 15% and the...
Jonathan Moules
09:33 AM Bug report #8422 (Feedback): Field Calculator doesn't work - spatiaLite
I cannot confirm using for example the SL dataset you added to other tickets today. Tested on qgis master on both Lin... Giovanni Manghi
09:18 AM Bug report #7354: Export/Add geometry columns doesn't work as expected
Salvatore Larosa wrote:
> Which other tools are you refering to ?
I can't remember now, but may be this patch fixed ...
Giovanni Manghi
04:06 AM Bug report #7354: Export/Add geometry columns doesn't work as expected
Giovanni Manghi wrote:
> I would propose to close this, because the tools works, it is just the table that is not ref...
Salvatore Larosa
09:00 AM Bug report #8435 (Feedback): Spatialite, PostGIS layers with 8-byte primary keys don't display in...
have you tested qgis master? Giovanni Manghi
08:54 AM Bug report #8435 (Closed): Spatialite, PostGIS layers with 8-byte primary keys don't display in I...
Looks like there was an old issue with other layer providers: Issues #6238, #1920, #62, etc. for PostGIS, MSSQL
SQLi...
Brian Freed
08:01 AM Bug report #8433: Repeated Crash - Spatial Query tool
Jonathan Moules wrote:
> Not much I can do about it I'm afraid.
you should test outside your work environment, so ...
Giovanni Manghi
07:59 AM Bug report #8433: Repeated Crash - Spatial Query tool
Giovanni Manghi wrote:
> Jonathan Moules wrote:
> > It's occurring to me that maybe I'm just really /really/ unlucky....
Jonathan Moules
07:56 AM Bug report #8433: Repeated Crash - Spatial Query tool
Jonathan Moules wrote:
> It's occurring to me that maybe I'm just really /really/ unlucky. :-)
the source of your pr...
Giovanni Manghi
07:54 AM Bug report #8433: Repeated Crash - Spatial Query tool
Rémi Bovard wrote:
> It worked fine here on W7 latest weekly.
>
> I noticed that the UI freezed at about 35% (step 1...
Giovanni Manghi
07:53 AM Bug report #8433: Repeated Crash - Spatial Query tool
It's occurring to me that maybe I'm just really /really/ unlucky. :-)
I double checked that deleting the non-spatia...
Jonathan Moules
07:52 AM Bug report #8433: Repeated Crash - Spatial Query tool
It worked fine here on W7 latest weekly.
I noticed that the UI freezed at about 35% (step 1/2) and 10 sec after unfr...
Rémi Bovard
07:38 AM Bug report #8433: Repeated Crash - Spatial Query tool
Tested both on Linux and Windows and no crash. Giovanni Manghi
07:30 AM Bug report #8433: Repeated Crash - Spatial Query tool
See attached. I deleted all the non-spatial data from it and compressed it heavily. These are the two files that brea... Jonathan Moules
07:30 AM Bug report #8433: Repeated Crash - Spatial Query tool
See attached. I deleted all the non-spatial data from it and compressed it heavily. These are the two files that brea... Jonathan Moules
07:16 AM Bug report #8433 (Feedback): Repeated Crash - Spatial Query tool
can you link the dataset for download (ex dropbox)? Giovanni Manghi
07:15 AM Bug report #8433 (Closed): Repeated Crash - Spatial Query tool
Reproduce:
1) Add SpatiaLite layer (polygon layer)
2) Add ShapeFile (polygon)
3) Open Vector->Spatial Query Tool
4) S...
Jonathan Moules
07:35 AM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
Now I see this also on a (clean) Windows/osgeo4w installation on both master and 1.8, while in the standalone 1.8 the... Giovanni Manghi
07:35 AM Bug report #8340: Very slow Spatialite DB creation on qgis 2.0/master
Now I see this also on a (clean) Windows/osgeo4w installation on both master and 1.8, while in the standalone 1.8 the... Giovanni Manghi
07:03 AM Bug report #8432 (Feedback): Copy/Paste from shape to mysql misses attributes (sets to NULL)
You must try qgis master anyway. Please test it and report back. Giovanni Manghi
07:03 AM Bug report #8432 (Feedback): Copy/Paste from shape to mysql misses attributes (sets to NULL)
You must try qgis master anyway. Please test it and report back. Giovanni Manghi
06:25 AM Bug report #8432 (Closed): Copy/Paste from shape to mysql misses attributes (sets to NULL)
In QGIS 1.7 you can select and copy/paste features to an mysql-db and both geometry and attributes work as expected.
...
Jonas Reinhardt
04:35 AM Feature request #8428: QGIS should be pinnable
For reference:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd391569(v=vs.85).aspx
especially:
http://ms...
Matthias Kuhn
04:27 AM Feature request #8428: QGIS should be pinnable
It might not be a issue for a release build because we start them differently. Nathan Woodrow
04:25 AM Feature request #8428: QGIS should be pinnable
Thanks Nathan, this does resolve it (I didn't know you could edit pinned properties until now), but it is a workaroun... Jonathan Moules
04:14 AM Feature request #8428: QGIS should be pinnable
When you pin QGIS Windows is pinning the running exe not the batch file that was used to start it. I don't know if th... Nathan Woodrow
04:08 AM Feature request #8428 (Closed): QGIS should be pinnable
Windows 7, x64 - QGIS weekly - a13cdf8
If I pin QGIS to my taskbar, I can't actually run it from there. Whenever I...
Jonathan Moules
04:14 AM Bug report #8429 (Closed): WMS requests for maps that were never asked for.
While testing the transparency/WMS bug, I looked in the logs for the WMS.
For some reason during this period of chang...
Jonathan Moules
03:52 AM Bug report #8426: Transparency mangles WMS layers
Jonathan Moules wrote:
> Possibly, but that won't let me test my given URL.
but we will know if is a general issue o...
Giovanni Manghi
03:48 AM Bug report #8426: Transparency mangles WMS layers
Possibly, but that won't let me test my given URL. Jonathan Moules
03:45 AM Bug report #8426: Transparency mangles WMS layers
Jonathan Moules wrote:
> My WMS is internal only and cannot be shared. Also my QGIS doesn't have access to internet s...
Giovanni Manghi
03:44 AM Bug report #8426: Transparency mangles WMS layers
My WMS is internal only and cannot be shared. Also my QGIS doesn't have access to internet so I can't test external o... Jonathan Moules
03:35 AM Bug report #8426 (Feedback): Transparency mangles WMS layers
Giovanni Manghi
03:35 AM Bug report #8426: Transparency mangles WMS layers
seems to work fine here, please provide a url. Giovanni Manghi
03:01 AM Bug report #8426: Transparency mangles WMS layers
QGIS weekly a13cdf8 - windows 7 x64 Jonathan Moules
02:58 AM Bug report #8426 (Closed): Transparency mangles WMS layers
I have a WMS. When I set transparency in QGIS, the layer becomes very ugly - colours become pseudo colours etc. See a... Jonathan Moules
03:50 AM Bug report #6063: ftools "Convex hull(s)": wrong attributes in output
made 3 quick tests in 1.9 with common attribute as integer, real and text, and all looks correct.
Thanx a lot.
Bernd Vogelgesang
03:06 AM Bug report #6063: ftools "Convex hull(s)": wrong attributes in output
Hmm... for me current implementation works fine Alexander Bruy
03:21 AM Bug report #8405 (Closed): Attribute table keeps old values (doesn't refresh) when adds a new field
Fixed in changeset commit:"16f24112f5dcc71ca2bab76f9bedc6bb7c5fc157". Matthias Kuhn
03:19 AM Bug report #3828: dissolve tool very slow
Pieter Roggemans wrote:
> I simply installed the qgis dev version from OSGeo4W, I didn't do anything to the configura...
Giovanni Manghi
03:07 AM Bug report #7708: Union produces the wrong output (plus progress bar does not move, too big outpu...
Yes, probably it is a good thing open a specific ticket about wrong union results and cite this ticket or move a test... Daniel Vaz
02:41 AM Bug report #7708: Union produces the wrong output (plus progress bar does not move, too big outpu...
Merged. Thanks, Daniel!
BTW, maybe it is better to close this ticket and open another one about incorrect union resu...
Alexander Bruy
03:01 AM Bug report #8427: Changing transparency re-requests WMS
QGIS weekly a13cdf8 - windows 7 x64 Jonathan Moules
03:01 AM Bug report #8427 (Closed): Changing transparency re-requests WMS
Every time I change transparency on a WMS layer in QGIS, it re-requests that layer.
If I change it five times without...
Jonathan Moules
02:24 AM Bug report #8425 (Closed): Simplify feture map tool doesn't work with polygons with holes
Seems Simplify feature can't work for polygons with holes, error message is "This feature cannot be simplified. Check... Alexander Bruy
02:17 AM Bug report #4189 (Closed): Simplify feature and Simplify geometries gives incorrect result on val...
Fixed in changeset commit:"b88b76b510d6e07cb0f3262bb0407257d8a4417a". Alexander Bruy
02:17 AM Bug report #4189: Simplify feature and Simplify geometries gives incorrect result on valid polygon
Just tested patch, works fine for fTools, but "Simplify Feature" map tool still don't work. Alexander Bruy
02:03 AM Bug report #8424: Buffer treatment don't use good distance setting
I was pretty sure to ask for an RGF 93 projection creating the shape file, but must be my mistake.
Just created ano...
Arthur Vignacq

2013-08-07

01:57 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Arthur Vignacq wrote:
> Yes, I think it's the last release as I downloaded it yesterday (Mac osX).
>
> My visual at...
Giovanni Manghi
01:55 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Yes, I think it's the last release as I downloaded it yesterday (Mac osX).
My visual attached.
Arthur Vignacq
01:03 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Arthur Vignacq wrote:
> Giovanni Manghi wrote:
> > did you choose custom delimiter -> semicolon?
>
> I don't have th...
Giovanni Manghi
12:23 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Giovanni Manghi wrote:
> did you choose custom delimiter -> semicolon?
I don't have this option. In custom delimiter...
Arthur Vignacq
09:01 AM Bug report #8421 (Feedback): "import delimited text layer" does not work with files created on ex...
did you choose custom delimiter -> semicolon? Giovanni Manghi
08:58 AM Bug report #8421 (Closed): "import delimited text layer" does not work with files created on exce...
Hello,
I just tried to import a CSV file in QGIS 1.9 master. But even if I select ; as the separator factor, QGIS ju...
Arthur Vignacq
01:54 AM Bug report #8424 (Closed): Buffer treatment don't use good distance setting
Arthur Vignacq wrote:
> http://speedy.sh/c3wts/Port-contours.zip
> Base layer attached
the prj of your shape says it...
Giovanni Manghi
01:54 AM Bug report #8424 (Closed): Buffer treatment don't use good distance setting
Arthur Vignacq wrote:
> http://speedy.sh/c3wts/Port-contours.zip
> Base layer attached
the prj of your shape says it...
Giovanni Manghi
01:51 AM Bug report #8424: Buffer treatment don't use good distance setting
please specify your projection settings (CRS + projection on the fly yes-no) and measuring units preferences.
The be...
Regis Haubourg
01:51 AM Bug report #8424: Buffer treatment don't use good distance setting
http://speedy.sh/c3wts/Port-contours.zip
Base layer attached
Arthur Vignacq
01:48 AM Bug report #8424: Buffer treatment don't use good distance setting
Edit: Buffer polygone created bigger than +100 000 ha2 ... Bigger than France Arthur Vignacq
01:46 AM Bug report #8424: Buffer treatment don't use good distance setting
Arthur Vignacq wrote:
> Details folowing:
> I have a layer with +10 polygonal object (around 1ha). Menu Vector --> Ge...
Giovanni Manghi
01:37 AM Bug report #8424: Buffer treatment don't use good distance setting
Details folowing:
I have a layer with +10 polygonal object (around 1ha). Menu Vector --> Geotreatment --> Buffer
Sett...
Arthur Vignacq
01:14 AM Bug report #8424 (Feedback): Buffer treatment don't use good distance setting
please add sample data and detailed steps on how to replicate the issue. Giovanni Manghi
01:14 AM Bug report #8424 (Feedback): Buffer treatment don't use good distance setting
please add sample data and detailed steps on how to replicate the issue. Giovanni Manghi
01:13 AM Bug report #8424 (Closed): Buffer treatment don't use good distance setting
Hello,
I've just tried a usual option I frequently use in QGIS older version, but with 1.9 master, buffer don't work...
Arthur Vignacq
01:42 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
Turns out this is different to #8406
Further to that bug report I've expanded the URL but it hasn't fixed the issue....
Jonathan Moules
01:39 AM Bug report #8406: WMTS Connection is not working
I'm not sure this should have been closed.
Consider it from a users perspective - They wouldn't expect to add SERVER ...
Jonathan Moules
12:38 AM Bug report #8423 (Closed): QGIS interface stops updating
QGIS weekly a13cdf8 - windows 7 x64
See the attached screenshots. When I resize QGIS, or change the window layer (i....
Jonathan Moules
12:19 AM Bug report #8422 (Closed): Field Calculator doesn't work - spatiaLite
I have a SpatiaLite database. When I try and use field calculator on it absolutely nothing happens. I don't get eithe... Jonathan Moules
12:13 AM Bug report #8414 (Closed): html annotation dialog shows "form annotation" in the title
Fixed in changeset commit:"1e28ce5273c658c523805b59bfeb1c41337af68b". Alexander Bruy
10:15 PM Bug report #8395: split features is not working properly
I would have some time to do this, but we would have to discuss it first.
I would prefer Matthias' solution with a si...
Denis Rouzaud
04:14 PM Bug report #8395: split features is not working properly
Denis are you planning on working on this? Nathan Woodrow
05:35 PM Bug report #8411: Creating SVG image icons is slow in Print composer
Thanks Nathan,
Maybe a more specific string comparison, so it doesn't mask other QColor::setNamedColor warnings/erro...
Larry Shaffer
05:25 PM Bug report #8411: Creating SVG image icons is slow in Print composer
This is fixed now by suppressing the warning for setNamedColor. It's not ideal but having a slow composer when using... Nathan Woodrow
05:20 PM Bug report #8411 (Closed): Creating SVG image icons is slow in Print composer
Fixed in changeset commit:"ee268984de32d631ee5cd57dd895dc8d8977000e". Nathan Woodrow
04:42 PM Bug report #8398: Help doesn't open
Can't confirm here. Opens the help viewer as expected. Nathan Woodrow
02:10 AM Bug report #8398: Help doesn't open
Always the same error with the latest weekly 7748102 Rémi Bovard
02:18 PM Bug report #3828: dissolve tool very slow
I simply installed the qgis dev version from OSGeo4W, I didn't do anything to the configuration. I only found a saga ... Pieter Roggemans
02:45 AM Bug report #3828: dissolve tool very slow

Pieter Roggemans wrote:
> Yep, I saw and tried both, but they both gave the same type of error using the most rece...
Giovanni Manghi
08:00 AM Bug report #8418: Composer and labels bug
Giovanni Manghi wrote:
> > Yes I have, but I don't see what expression I could use to show : "Only row 1 of layer 2 W...
Arthur Vignacq
03:19 AM Bug report #8418: Composer and labels bug
> > Another bug with labels, when using a character ")" to wrap the label, this character disappear from the label ! ... Nathan Woodrow
03:03 AM Bug report #8418: Composer and labels bug

> Yes I have, but I don't see what expression I could use to show : "Only row 1 of layer 2 WHEN intersect OBJECT in...
Giovanni Manghi
07:02 AM Feature request #8420 (Closed): Add a "add only classes of visible features" to legend in print c...
I'am using the Corine Land Cover data for a projet. There is around 40 types of land use in this database. In my prin... Arthur Vignacq
03:45 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
I've uploaded the file to another provider that hosts files for 90 days: https://hotfile.com/dl/238223792/7662375/GLO... Jan David Bendrien

2013-08-06

01:44 AM Bug report #8395: split features is not working properly
Sounds good to me. Are you thinking about using two rubberbands with two distinct colors for that, one being always a... Matthias Kuhn
01:31 AM Bug report #8395: split features is not working properly
I don't mind that solution if it's easy to do. Sounds like something that would be nice for the normal line tools too. Nathan Woodrow
01:16 AM Bug report #8395: split features is not working properly
A solution to a disambiguation would be to have distinct color/width in the rubber band for already drawn line and th... Denis Rouzaud
01:03 AM Bug report #8395: split features is not working properly
This is due to the change of behavior of the right-click in digitization. Right-click doesn't add a new node. Denis Rouzaud
01:15 AM Bug report #8418: Composer and labels bug
Hello Giovanni,
Thanks for the answer. My answers just under.
Giovanni Manghi wrote:
> hi,
>
> >It's my first bug...
Arthur Vignacq
09:32 AM Bug report #8418 (Closed): Composer and labels bug
I'm closing this because it is about several issues, let continue the discussion here anyway, then we can file separa... Giovanni Manghi
09:32 AM Bug report #8418 (Closed): Composer and labels bug
I'm closing this because it is about several issues, let continue the discussion here anyway, then we can file separa... Giovanni Manghi
09:30 AM Bug report #8418 (Feedback): Composer and labels bug
hi,
>It's my first bug report so, I hope not to be too bad at it. I'm using 1.9.0-Master on mac osx.
please file 1 ...
Giovanni Manghi
08:41 AM Bug report #8418 (Closed): Composer and labels bug
Hello everybody,
It's my first bug report so, I hope not to be too bad at it. I'm using 1.9.0-Master on mac osx.
I'...
Arthur Vignacq
12:28 AM Bug report #8410: Changing repository with localized name produces an error
fixed in Ubuntu too, thanks Borys. Maxim Dubinin
06:17 PM Bug report #8192 (Closed): Zoom to Layer zooms to a far too large area
Fixed in changeset commit:"6149b3a6fa15c0a5cd497c53269bd0f756c837e6". Nyall Dawson
06:17 PM Bug report #8194 (Closed): Heatmap plugin doesn't work for points along highway
Fixed in changeset commit:"6149b3a6fa15c0a5cd497c53269bd0f756c837e6". Nyall Dawson
05:21 PM Feature request #8419: After doing "Save selection as..." QGIS doesn't ask to add the new file to...
Oops... thanks!!! Pieter Roggemans
02:24 PM Feature request #8419 (Closed): After doing "Save selection as..." QGIS doesn't ask to add the ne...
Option is already there
!http://i.imgur.com/kNvdmct.png!
Nathan Woodrow
02:24 PM Feature request #8419 (Closed): After doing "Save selection as..." QGIS doesn't ask to add the ne...
Option is already there
!http://i.imgur.com/kNvdmct.png!
Nathan Woodrow
01:43 PM Feature request #8419 (Closed): After doing "Save selection as..." QGIS doesn't ask to add the ne...
Most stupid request ever... but for the sake of consistent behaviour it would be better... Pieter Roggemans
01:00 PM Bug report #3828: dissolve tool very slow
Yep, I saw and tried both, but they both gave the same type of error using the most recent qgis 1.9 (see below for th... Pieter Roggemans
12:32 PM Bug report #3828: dissolve tool very slow
Pieter Roggemans wrote:
> Indeed very slow :-(.
in qgis 2.0, with SEXTANTE, you have (fast) alternatives, both SAGA ...
Giovanni Manghi
12:30 PM Bug report #3828: dissolve tool very slow
Indeed very slow :-(. Pieter Roggemans
12:30 PM Bug report #8411: Creating SVG image icons is slow in Print composer
Pekka Sarkola wrote:
> So, if slowness is coming from logging of warnings: workaround could be disable logging. Not v...
Larry Shaffer
12:24 PM Bug report #7794: Fail create a spatial index with shape file that contain Japanese in the file name
The pull request was merged. Fixed in changeset commit:"a2776da". Minoru Akagi
12:20 PM Bug report #8391 (Closed): OGR SQL: REPACK fails if filename includes non-ascii characters
The pull request was merged. Fixed in changeset commit:"a2776da" Minoru Akagi
11:01 AM Bug report #8178: Shifted raster: origin in qgis different than that reported by gdalinfo
Bottom line is that, as far as I understand how qgis works, you must file anyway also a feature request ticket becaus... Giovanni Manghi
10:55 AM Bug report #8178: Shifted raster: origin in qgis different than that reported by gdalinfo
Oh now I see that you are referring to TTC2770v2_0_1otb.tif, that you haven't attached... Giovanni Manghi
10:51 AM Bug report #8178: Shifted raster: origin in qgis different than that reported by gdalinfo
With GDAL 1.10 and a copy if QGIS compiled against GDAL 1.10 (as it is now fpr qgis master on Windows and Ubuntu), th... Giovanni Manghi
10:44 AM Bug report #8414: html annotation dialog shows "form annotation" in the title
Here is pull request https://github.com/qgis/Quantum-GIS/pull/791. Don't commit it directly as we in string freeze no... Alexander Bruy
09:42 AM Bug report #8417 (Open): incorrect value loaded from netcdf file with scale factor
related discussions/pages
http://trac.osgeo.org/gdal/wiki/NetCDF_Improvements
http://trac.osgeo.org/gdal/ticket/379...
Giovanni Manghi
08:50 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
Here is a second link: https://www.wetransfer.com/downloads/5416cedcb421d89bd06815dbd37cbd6020130806154343/96a8c8 Jan David Bendrien
08:45 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
I'm uploading it. Here is a first link (but it says it will take 90 minutes to download, so I am looking for another ... Jan David Bendrien
08:30 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
Jan David Bendrien wrote:
> Trying to upload the dataset (200 MB file)
max attachment size is 5mb per file. Link it ...
Giovanni Manghi
08:29 AM Bug report #8417: incorrect value loaded from netcdf file with scale factor
Trying to upload the dataset (200 MB file) Jan David Bendrien
07:42 AM Bug report #8417 (Feedback): incorrect value loaded from netcdf file with scale factor
Can you attach the actual dataset? Giovanni Manghi
07:42 AM Bug report #8417 (Feedback): incorrect value loaded from netcdf file with scale factor
Can you attach the actual dataset? Giovanni Manghi
07:03 AM Bug report #8417 (Closed): incorrect value loaded from netcdf file with scale factor
I have downloaded a large (200+ MB) netcdf file on sea water velocities (from this dataset: http://www.myocean.eu/web... Jan David Bendrien
03:46 AM Bug report #8398: Help doesn't open
Please, could you try with a more updated weekly package or better, if possible, with the latest master ? Salvatore Larosa

2013-08-05

11:05 PM Bug report #8411: Creating SVG image icons is slow in Print composer
So, if slowness is coming from logging of warnings: workaround could be disable logging. Not very nice. Maybe there s... Pekka Sarkola
04:31 PM Bug report #8411: Creating SVG image icons is slow in Print composer
Ok, I've tracked down the issue, but not sure how to fix it.
Running the following from PyQGIS shell, gives a simila...
Larry Shaffer
10:51 AM Bug report #8411: Creating SVG image icons is slow in Print composer
Larry Shaffer wrote:
> No issue on Mac (10.7.5). May be the QSvgRenderer on Windows (Qt 4.7.1 ?) is having issues wit...
Giovanni Manghi
10:48 AM Bug report #8411: Creating SVG image icons is slow in Print composer
No issue on Mac (10.7.5). May be the QSvgRenderer on Windows (Qt 4.7.1 ?) is having issues with the new SVG symbol li... Larry Shaffer
10:09 AM Bug report #8411 (Open): Creating SVG image icons is slow in Print composer
Confirmed on Windows. Giovanni Manghi
09:49 AM Bug report #8411 (Feedback): Creating SVG image icons is slow in Print composer
Do you have additionals SVG files other than the ones installed by default? It is just a Windows issue, right? Giovanni Manghi
09:49 AM Bug report #8411 (Feedback): Creating SVG image icons is slow in Print composer
Do you have additionals SVG files other than the ones installed by default? It is just a Windows issue, right? Giovanni Manghi
02:23 PM Bug report #8405: Attribute table keeps old values (doesn't refresh) when adds a new field
Giovanni Manghi wrote:
> used to work as expected in 1.8 ?
with the same steps as the video, the 1.8 has worked.
Salvatore Larosa
10:28 AM Bug report #8405 (Feedback): Attribute table keeps old values (doesn't refresh) when adds a new f...
used to work as expected in 1.8 ? Giovanni Manghi
10:56 AM Bug report #8415 (Closed): svg/text annotations are always set to "fixed map position" in the pri...
See attached screencast. It seems that in the composer the text/svg annotations are always shown as is they are set t... Giovanni Manghi
10:31 AM Bug report #8414 (Closed): html annotation dialog shows "form annotation" in the title
subject says it all Giovanni Manghi
10:29 AM Bug report #8413: Labels backgrounds are not correctly aligned in QGIS server layers (or maybe it...
Yes, it is probably because of #8068, which I am working on. Larry Shaffer
10:27 AM Bug report #8413 (Closed): Labels backgrounds are not correctly aligned in QGIS server layers (or...
See attached images.
But now I realize that may be is just because of #8068
Giovanni Manghi
10:20 AM Bug report #8406 (Closed): WMTS Connection is not working
I've closed the ticket Bob Bruce
10:20 AM Bug report #8406: WMTS Connection is not working
Thanks everybody for your help with this.
Today I (finally) managed to get my QGIS master copy updated. I tried this...
Bob Bruce
05:22 AM Bug report #8406: WMTS Connection is not working
Hi,
Testing WMTS with authentification leads to crsh here, if authentification fails. Did someone try it?
Regis Haubourg
05:12 AM Bug report #8406: WMTS Connection is not working
Jürgen Fischer wrote:
> not reproducable here. Specifying @http://nis.cubewerx.com/cubewerx/cubeserv?CONFIG=OIM_MB_-...
Rémi Bovard
04:46 AM Bug report #8406: WMTS Connection is not working
Jonathan Moules wrote:
> #8401 - same thing? I've not tried with that WMTS (my QGIS can't access the internet) but QG...
Jürgen Fischer
04:40 AM Bug report #8406: WMTS Connection is not working
#8401 - same thing? I've not tried with that WMTS (my QGIS can't access the internet) but QGIS fails for me on my int... Jonathan Moules
10:02 AM Bug report #8395 (Open): split features is not working properly
Giovanni Manghi
10:02 AM Bug report #8395 (Feedback): split features is not working properly
I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An...
Giovanni Manghi
10:02 AM Bug report #8395 (Feedback): split features is not working properly
I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An...
Giovanni Manghi
10:02 AM Bug report #8395 (Feedback): split features is not working properly
I can confirm the issue also on Linux.
If just a straight line (with just two nodes) is drawn then qgis returns
"An...
Giovanni Manghi
08:42 AM Bug report #8404 (Closed): No public key available for Ubuntu repository
Giovanni Manghi
08:41 AM Bug report #8404: No public key available for Ubuntu repository
My mistake - that was the issue.
I just wasn't clear as to the necessity of adding that public key...the instruction...
Matthew Baker
05:02 AM Bug report #8398: Help doesn't open
Confirmed here... Rémi Bovard
02:15 AM Bug report #8398: Help doesn't open

> The failure is the dialog specific help buttons. So "Add Oracle Tables" -> Help fails. "Add Layers from a Server"...
Giovanni Manghi
02:08 AM Bug report #8398: Help doesn't open
Giovanni Manghi wrote:
> Jonathan Moules wrote:
> > Does it require internet access to work? My QGIS doesn't have int...
Jonathan Moules
02:02 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer
The WMS is on the internal corporate Network so I can't share it.
Can you not see what the problem is from the dump ...
Jonathan Moules

2013-08-04

01:02 AM Bug report #8411 (Closed): Creating SVG image icons is slow in Print composer
I create new print composer, then add Image. When I open "Search directories" to select SVG image, QGIS just start to... Pekka Sarkola
 

Also available in: Atom