Activity

From 2013-12-31 to 2014-01-29

2014-01-29

07:27 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
I've tried with NVIDIA proprietary driver, as well as the open source Nouveau driver, and in both cases I can duplica... Mathieu Pellerin - nIRV
04:24 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro: that was with yesterdays nightly, so fairly current dev version. In 2.0.1 I get very fleeting white outs - mu... ramon .
12:03 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> I've recorded a video of the issue, which hopefully might do a better job than my wo...
Giovanni Manghi
07:39 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Ok Mathieu, I'll try, but it will be hard for me, I've never used Linux, much less compiled QGIS in Linux Alvaro Huarte
07:19 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro, the log window doesn't throw any error message.
Yes, please, try on linux / ubuntu 13.10, it does seem to be...
Mathieu Pellerin - nIRV
04:38 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
I am sorry Mathieu, I do not get to reproduce this behavior.
Can you view error messages in log window please ?
I u...
Alvaro Huarte
03:29 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Ok Mathieu, thanks, I study it! Alvaro Huarte
03:06 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
I've recorded a video of the issue, which hopefully might do a better job than my words at explaining the problem; it... Mathieu Pellerin - nIRV
01:21 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Thanks Ramon, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When use...
Alvaro Huarte
07:06 PM Bug report #9457 (Closed): while in atlas preview mode, newly inserted label item expressions not...
Steps to reproduce:
1. Open a project that has an atlas setup
2. Open the composer in which you've set up an atlas
3....
Mathieu Pellerin - nIRV
06:21 PM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...
OK, I can actually reproduce the issue in QGis 2.0.1, so I guess it is not strictly speaking a regression. However, I... Leyan Ouyang
02:58 PM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...
Yes, while a raster layer is being rendered I can not check in legend (the application is locked), but while a vector... Alvaro Huarte
11:55 AM Bug report #9447 (Feedback): Toggling layer visibility sometimes has no effect when using geometr...
Does it happens only with vectors? Giovanni Manghi
01:11 AM Bug report #9447: Toggling layer visibility sometimes has no effect when using geometry simplific...
Hi Leyan, I can reproduce this behavior in QGIS 2.0 Dufour and master before simplification was merged.
When user ch...
Alvaro Huarte
06:21 PM Feature request #8845: PDF output types & placement.
I found this link that has more info about PDF placement errors in InDesign.
http://indesignsecrets.com/failed-to-op...
James Harvey
06:00 PM Feature request #8845: PDF output types & placement.
I have tested the PDF's created by QGIS on a old Macbook Pro in an old copy of InDesign 3 and they work fine. The iss... James Harvey
05:46 PM Feature request #8845: PDF output types & placement.
I am still having issues with PDF placement. I have also tried the raster PDF output from QGIS, but still get errors ... James Harvey
03:58 PM Feature request #9456 (Closed): Improve offset line algorithm
The current line offset algorithm used in line symbol layers is prone to extreme jagged spikes and other rendering er... Nyall Dawson
03:56 PM Bug report #7873 (Closed): Delimited Text Icon has reverted
Seems to no longer be the case. ramon .
03:55 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Thanks Nathan, It was a curious.
Best Regards
Alvaro Huarte
03:52 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Like we have in Python. Well layer.getFeatures returns a lazy iterator that only evals when you call next. A bit lik... Nathan Woodrow
03:47 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
In c# we can write a method as...
IEnumerable<QgsFeature> QgsVectorLayer::selectedFeaturesEnum()
{
QgsFeatureRequ...
Alvaro Huarte
03:35 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
In C++ or Python.
What are you trying to do?
Nathan Woodrow
03:29 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi, I have a question, it is possible use in QGIS/Qt something similar to IEnumerable/IEnumerator interfaces of c# ?
...
Alvaro Huarte
03:16 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Nathan Woodrow wrote:
> Or better yet just use `selectedFeaturesCount()`.
You are right, thanks Nathan
Alvaro Huarte
03:10 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Ups...
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L126
https://github.com/yello...
Alvaro Huarte
03:09 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Or better yet just use `selectedFeaturesCount()`. Nathan Woodrow
03:07 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
I think that the problem is:
https://github.com/yellow-sky/GeometryCopier/blob/master/src/geometry_copier.py#L109
It...
Alvaro Huarte
02:57 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi again
I've isolated the culprit. This slowness is due to the experimental "Geometry copier" plug-in by Nikulin Ev...
Rhenriques Henriques
02:41 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is...
Alvaro Huarte
02:40 PM Bug report #9348 (Closed): Selection of thousands of points very slow in QGIS2
Giovanni Manghi
02:39 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi again Alvaro
Definitely a plug-in. I've just disabled all and selection is normal. I'm going to isolate the culpr...
Rhenriques Henriques
02:33 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Rhenriques Henriques wrote:
> Hi Alvaro
>
> That example is before or after the code modification? Your selection is...
Giovanni Manghi
02:29 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Try running with @--noplugins@ to check if it is a plugin issue Matthias Kuhn
02:27 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi Alvaro
That example is before or after the code modification? Your selection is indeed quicker. Maybe it's an OS ...
Rhenriques Henriques
01:51 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi Rhenriques, I get "normal" results, I have released a video (~18mb):
http://www.filedropper.com/testissue9348
c...
Alvaro Huarte
10:55 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi Alvaro
The data that I'm using is restricted. However I've generated a Random 400000 Points layer for the Iberian...
Rhenriques Henriques
09:02 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Rhenriques Henriques wrote:
> Hi Alvaro
>
> Thank you so much for taking ongoing this annoying issue. I've made the ...
Alvaro Huarte
08:24 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi Alvaro
Thank you so much for taking ongoing this annoying issue. I've made the modifications to the xxx.h files i...
Rhenriques Henriques
03:20 PM Bug report #9455 (Closed): Composer Item snaps to paper's shadow rather than paper
Hi !
There's a rectangle which represents the shadow of the paper in the composer. When moving objects around, they ...
Olivier Dalang
02:54 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
Matthias Kuhn wrote:
> I could (partially) revert commit:5c38775 which could probably help here. But this would in tu...
Giovanni Manghi
02:51 PM Bug report #9429 (Closed): slow selection of features
Giovanni Manghi
02:44 PM Bug report #9429: slow selection of features
I think so Alvaro Huarte
02:37 PM Bug report #9429: slow selection of features

> But this issue is about other use case.
> I have not closed the issue #9348
the patch proposed has been merged an...
Giovanni Manghi
08:36 AM Bug report #9429: slow selection of features
Rhenriques Henriques wrote:
> Be careful because this problem is not solved. Selection remains slow as before in the ...
Alvaro Huarte
08:30 AM Bug report #9429 (Reopened): slow selection of features
Be careful because this problem is not solved. Selection remains slow as before in the latest NB. Even with the modif... Rhenriques Henriques
01:36 PM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Outch, that was a bad one indeed. Sorry for that. Matthias Kuhn
01:35 PM Bug report #9424 (Closed): Attribute table editing writes simultaneously in the selected column ...
Fixed in changeset commit:"5f1c8f4980e2c6e78a4a49a3994a46e0da2dc059". Matthias Kuhn
11:50 AM Bug report #9424 (Open): Attribute table editing writes simultaneously in the selected column fo...
Giovanni Manghi
11:54 AM Bug report #7822 (Closed): Export to Spatialite is really slow, compared to commandline ogr2ogr
Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line....
Giovanni Manghi
11:54 AM Bug report #7822 (Closed): Export to Spatialite is really slow, compared to commandline ogr2ogr
Please reopen if I'm wrong:
right now (on Ubuntu, GDAL/OGR 1.10.0) the operation is slow also from the command line....
Giovanni Manghi
11:44 AM Feature request #9451: Create a unified "Add Data" dialog
There's also an old ticket #773 for the same thing Martin Dobias
05:01 AM Feature request #9451 (Closed): Create a unified "Add Data" dialog
Create a unified "Add Data" dialog that can be used for any data source. This will significantly improve user experie... Jonathan Moules
11:42 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Matthias Kuhn wrote:
> Is this still an issue?
>
> Looking at my earlier comments, I didn't take care of this one: "...
Giovanni Manghi
11:37 AM Bug report #9148 (Feedback): Data Defined Label Locations NULL value doesn't work as expected wit...
Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases? Giovanni Manghi
11:37 AM Bug report #9148 (Feedback): Data Defined Label Locations NULL value doesn't work as expected wit...
Hi Alexandre, I can confirm the issue, but I'm not sure is a regression. Did it worked ok on previous QGIS releases? Giovanni Manghi
11:32 AM Bug report #9442 (Open): Digitizing broken in QGIS master
Issued confirmed for shapefiles, PostGIS ok. Giovanni Manghi
04:08 AM Bug report #9442: Digitizing broken in QGIS master
Hi, I can reproduce the issue on my machine (7a9e682),
but only using Polygon features with OGR and Spatialite provi...
Salvatore Larosa
02:46 AM Bug report #9442 (Feedback): Digitizing broken in QGIS master
I can't reproduce with today's master on ubuntu Denis Rouzaud
10:02 AM Bug report #9453 (Closed): ERROR: schema "topology" does not exist
Fixed in changeset commit:"7456eb7924edd0a660ca98b3e6d7517bdce2fea8". Jürgen Fischer
08:39 AM Bug report #9453 (Closed): ERROR: schema "topology" does not exist
Metadata tables of topology are queried even if topology is not available, resulting in an error.
This is when connec...
Sandro Santilli
09:13 AM Bug report #5896: Identify of WMS layers does not work
Confirmed for points and lines and fixed. Identify tool is now using as context 1x1 pixel box reprojected to layer CR... Radim Blazek
09:03 AM Bug report #5896 (Closed): Identify of WMS layers does not work
Fixed in changeset commit:"62075294638e3716c244371d056797efda125905". Radim Blazek
08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map
This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte
08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map
This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte
08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map
This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte
08:52 AM Bug report #9454: MapNodeTool unnecessarily refresh the map
This pull fixes the bug:
https://github.com/qgis/QGIS/pull/1125
Alvaro Huarte
08:46 AM Bug report #9454 (Closed): MapNodeTool unnecessarily refresh the map
When MapNodeTool is active and user changes the selected nodes, it unnecessarily refresh the map Alvaro Huarte
07:38 AM Feature request #6816 (Feedback): Display length and azimuth while digitizing polylines and polygons
there is a new plugin which does this: CadInput [0]
as of today, it is available as an experimental plugin.
[0] http...
Denis Rouzaud
07:36 AM Bug report #8873: "Delete Ring" - snap tolerance warning
https://github.com/qgis/QGIS/pull/1127 Denis Rouzaud
05:04 AM Feature request #2490 (Closed): Topological editing for lines
luca76 -
04:15 AM Bug report #9196 (Closed): WMTS and CRS issue
Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias
04:15 AM Bug report #9196 (Closed): WMTS and CRS issue
Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias
04:15 AM Bug report #9196 (Closed): WMTS and CRS issue
Fixed in commit:ba0a637803 (WMS: better use of reported bounding boxes) and commit:ec7718b55e (WMTS: detection of bou... Martin Dobias
04:13 AM Bug report #9444: WFS client not requesting new features when not-cached
> If you would raise the maxfeaturenumber of your WFS to 10000, I think you would be happy with current 'strategy' :-... Jonathan Moules
04:11 AM Feature request #9450 (Open): New WFS connection option - Max number of features returned
On the WFS "New Connection" - create a new option:
"Maximum Features Returned (if known)" (or some better wording).
...
Jonathan Moules
02:40 AM Bug report #9430 (Closed): Disable "Paste Features as New Layer" if empty clipboard
Fixed in changeset commit:"7a9e6820043d26579d8a07f1ce0adde841f842e7". Denis Rouzaud
02:24 AM Bug report #9441 (Closed): cannot add a 1 segment line part in a multiline layer
Denis Rouzaud

2014-01-28

12:27 AM Bug report #9448 (Closed): New spatialite layer never completes
Same as #8340
alobo -
12:16 AM Bug report #9448 (Closed): New spatialite layer never completes
I try
1. Layer/New spatialite layer
2. Navigate to a directory and name the new layer test
3. Operation never comple...
alobo -
11:49 PM Bug report #9429 (Closed): slow selection of features
Alvaro Huarte
11:49 PM Bug report #9429 (Resolved): slow selection of features
Alvaro Huarte
09:56 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu seems to think I can get the error with this data http://www.licadho-cambodia.org/error2.zip.
What I'm seein...
ramon .
06:15 PM Bug report #9447 (Closed): Toggling layer visibility sometimes has no effect when using geometry ...
When I toggle layers visibility from the Layers window, sometimes there is no effect. The checkbox is toggled, but th... Leyan Ouyang
05:43 PM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
I also met this issue, very confusing to see random data changed in the table, even if the underlying data is not aff... Leyan Ouyang
05:09 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Hi Matthias
> Are you saying, that when you edit an attribute in the attribute table, it should not automatically b...
Giovanni Manghi
03:59 AM Bug report #9424 (Feedback): Attribute table editing writes simultaneously in the selected colum...
I am not sure I understand this report.
Are you saying, that when you edit an attribute in the attribute table, it s...
Matthias Kuhn
11:34 AM Bug report #9397 (Closed): Project's CRS is not written properly in the project's file
Fixed by leyan in https://github.com/qgis/QGIS/pull/1104 Marco Hugentobler
08:49 AM Bug report #8887: qgis don't use correctly the map-units in dimension of data-defined-properties ...
There is no bug but it is quite tricky. Data defined size may be used in two modes as area or diameter. Unfortunately... Radim Blazek
08:19 AM Bug report #9148 (Reopened): Data Defined Label Locations NULL value doesn't work as expected wit...
Alexandre Neto
08:16 AM Bug report #9148 (Closed): Data Defined Label Locations NULL value doesn't work as expected with ...
Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,... Alexandre Neto
08:16 AM Bug report #9148 (Closed): Data Defined Label Locations NULL value doesn't work as expected with ...
Can can confirm this also with postgis. If the X and Y values are NULL (Label not fixed), the labels are draw near 0,... Alexandre Neto
08:12 AM Bug report #9446 (Closed): offset tool crashes with multipolygons
to reproduce:
active layer: an editable line layer
enable offset tool
click on a multipolygon feature
Denis Rouzaud
07:58 AM Bug report #9441 (Resolved): cannot add a 1 segment line part in a multiline layer
fixed in #8cf9936d44bd2bbc733f3d6e57456f6ca65bd508 Denis Rouzaud
07:23 AM Bug report #9444: WFS client not requesting new features when not-cached
Hi,
Not all QGIS users are also managing the WFS server they are using so they could raise the server side maxFeatur...
Jukka Rahkonen
06:33 AM Bug report #9444: WFS client not requesting new features when not-cached
On second thought, it is not so much a bug in the logic I think, but more that what you want is a different 'refresh ... Richard Duivenvoorde
06:20 AM Bug report #9444: WFS client not requesting new features when not-cached
if I run QGIS in debug mode here on Linux, and load your wfs and pan the view, I see this message:
src/providers/wfs...
Richard Duivenvoorde
04:20 AM Bug report #9444: WFS client not requesting new features when not-cached
Hi Richard - I think you're more referring to what I reported in this ticket - #8871 - which is a different thing. I ... Jonathan Moules
01:42 AM Bug report #9444: WFS client not requesting new features when not-cached
sorry for the longread...
I wrote a small blog about this 'problem' http://www.qgis.nl/2013/04/29/qgis-en-wfs-cachin...
Richard Duivenvoorde
01:18 AM Bug report #9444: WFS client not requesting new features when not-cached
Everybody can not repeat the issue with these steps but one must zoom to correct area before 2) gives any features. T... Jukka Rahkonen
01:07 AM Bug report #9444: WFS client not requesting new features when not-cached
We have been experiencing the same issue. Datasets of different sizes and with different feature limits all have this... Neil Benny
04:08 AM Bug report #8481 (Feedback): "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is...
Is this still an issue?
Looking at my earlier comments, I didn't take care of this one: "Postgres: Field length and ...
Matthias Kuhn
03:55 AM Bug report #9445 (Closed): crash during diagram creation
Hi,
qgis crashes when trying to create histogram diagram (no matter which variables or how many variables).
No probl...
matteo ghetta
03:52 AM Bug report #9431 (Feedback): Crash When Using Relationships with Large PostGIS Tables
Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt...
Matthias Kuhn
03:52 AM Bug report #9431 (Feedback): Crash When Using Relationships with Large PostGIS Tables
Hi Jeremy,
It would be very helpful if you could attach a stacktrace of your crash and check how the memory consumpt...
Matthias Kuhn
02:13 AM Bug report #9348 (Feedback): Selection of thousands of points very slow in QGIS2
Alvaro Huarte
01:36 AM Bug report #9439: QGIS sends requests for layers when scrolling
I have seen this before. OpenJUMP used to do the same. Adding a timer that waits for 0.7 seconds resolved the issue. ... Jukka Rahkonen

2014-01-27

12:20 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Mathieu, to try reproduce the error, please can you send me the situation on the map? (windows size, map center po... Alvaro Huarte
08:28 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro, the layer gone missing is definitively linked to on the fly reprojection between ESPG:3148 (meter-based) to E... Mathieu Pellerin - nIRV
12:19 AM Bug report #9444 (Closed): WFS client not requesting new features when not-cached
Might be a regression.
1) Add http://maps.warwickshire.gov.uk/gs/ows as a WFS service
2) Add "Street Lights" - unche...
Jonathan Moules
04:08 PM Bug report #9443 (Closed): Snapping to guides not working in windows
In windows the snapping to guides is not snapping to the guides.
http://osgeo-org.1560.x6.nabble.com/Guides-and-grid...
ramon .
03:59 PM Feature request #9381: Print composer: add option for point grid
Is a point grid like in the attached file?
(Yep, I know the red dots are big and glary, but that can be changed)
ramon .
02:27 PM Bug report #9375 (Feedback): Simplification causes GEOS exceptions when layer has labels
Alvaro Huarte
11:19 AM Bug report #8600: QGIS 2.0 not working with NTLM proxy
Yes before the switch happened in the plugin manager NTLM worked for downloading plugins. Other core web access funct... Jeremy Palmer
03:47 AM Bug report #8600 (Feedback): QGIS 2.0 not working with NTLM proxy
Hi Jeremy,
is this really a regression or it wasn't supported either on older qgis releases?
The blocker tag is res...
Giovanni Manghi
08:13 AM Bug report #9442 (Closed): Digitizing broken in QGIS master
It seems that editing broke in QGIS master
Testing on
2.1.0+git20140126+55727f7~precise-ubuntugis1
Trying move a ...
Giovanni Manghi
08:00 AM Bug report #9441: cannot add a 1 segment line part in a multiline layer
new part's geometry is invalid -- to be more precise Denis Rouzaud
07:59 AM Bug report #9441 (Closed): cannot add a 1 segment line part in a multiline layer
trying to add a 1 segment line part to a feature in a multiline layer gives "invalid geometry" after right clicking. Denis Rouzaud
07:52 AM Bug report #9440 (Open): Do not show DB geometric columns in table view
When there is only one column in a database table, it is displayed on the canvas, and nothing is shown on the table i... Paolo Cavallini
07:05 AM Feature request #4852: Add gdal2xyz.py to GdalTools
There are still reasons not to do so:
* Processing is not always 100% stable
* GDALTools shows the gdal command line,...
Paolo Cavallini
07:01 AM Feature request #4852: Add gdal2xyz.py to GdalTools
How about porting gdaltools to processing toolbox (those that do not have an equivalent) and removing gdaltool? Etienne Tourigny
03:58 AM Feature request #4852: Add gdal2xyz.py to GdalTools
oh, right, I had forgot about it :) Giovanni Manghi
03:57 AM Feature request #4852 (Closed): Add gdal2xyz.py to GdalTools
gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago Alexander Bruy
03:57 AM Feature request #4852 (Closed): Add gdal2xyz.py to GdalTools
gdal2xyz already available in Processing toolbox. It was added about 5-6 month ago Alexander Bruy
02:46 AM Feature request #4852: Add gdal2xyz.py to GdalTools
Antonio Locandro wrote:
> any updates? do you think this could be done for 2.2 or 2.4
it should be relatively easy t...
Giovanni Manghi
06:08 AM Bug report #9439 (Closed): QGIS sends requests for layers when scrolling
The following certainly happens with WMS, WCS, WMTS. Probably happens with other data providers, but they don't log a... Jonathan Moules
05:34 AM Bug report #9438 (Closed): WMS CRS listed multiple times
Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ...
Jonathan Moules
05:28 AM Bug report #9437: WMS Client getting WGS84 BBOX wrong
Might be related to #6941 and/or #9196 Jonathan Moules
05:25 AM Bug report #9437 (Closed): WMS Client getting WGS84 BBOX wrong
Using WMS:
1) Connect to : http://maps.warwickshire.gov.uk/gs/ows
2) Add item 15 (z_OS_Raster_basemap)
3) QGIS might ...
Jonathan Moules
05:14 AM Feature request #8898: "Save vector layer as" - limit export
I like the "Extent" functionality on the "Save Raster layer as" dialog. Could that not be used/replicated?
That gets...
Jonathan Moules
02:06 AM Feature request #8898: "Save vector layer as" - limit export
For the extent-based export, there are two options:
1. have just a checkbox ("Export only features visible in map can...
Martin Dobias
04:59 AM Bug report #9436 (Closed): QGIS locks up while waiting for WMS response
For whatever reason, my WMS server isn't responding to queries at all (timeout).
To replicate: Requires Non-functioni...
Jonathan Moules
04:41 AM Bug report #6212: Incorrect sorting of uppercase and accented words in the "Style -> Categorized"...
Confirmed as fixed. Jonathan Moules
04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)
Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway...
Julien LARSENEUR
04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)
Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway...
Julien LARSENEUR
04:39 AM Bug report #9420 (Reopened): Bad WMS display (EPSG:2972)
Sorry but please have a look to my second sentence.
I've updated my dev version today and it doesn't work well anyway...
Julien LARSENEUR
04:35 AM Bug report #8870: "Metadata" for WMS/WFS/etc? layer issues
Note: Apparently these fields are for user metadata. My question then is - why? They can be easily automatically popu... Jonathan Moules
03:48 AM Feature request #9435 (Open): Simplification of layers when exporting composition to svg
QGIS should have an option to simplify map layers when exporting to svg. Otherwise complex map layers result in svg s... Nyall Dawson
03:37 AM Bug report #9415 (Closed): Problem with current Debian build
Fixed in latest master version.
Andy Wood
03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly
There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek
03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly
There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek
03:28 AM Bug report #8980: svg fill issue: lines not rendered correctly
There are two kind of irregularities with sv11.svg which do apply to any use of that svg including point markers and ... Radim Blazek
03:21 AM Bug report #7177 (Closed): Composer's legend "all" button does not take "lock layers" into account
Fixed in changeset commit:"177e5a195249f0ebae68c7a76acebb0fb95b7d36". Olivier Dalang
03:14 AM Bug report #9060: Area is wrong in QGIS master (again)
Alvaro Huarte wrote:
> Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The cur...
Giovanni Manghi
03:05 AM Bug report #5758: Primary key issue when using merge attributes of selected features tool
This is the error I get when trying to save my changes:
Could not commit changes to layer sgev...
Alexandre Neto
03:02 AM Bug report #5758 (Reopened): Primary key issue when using merge attributes of selected features tool
I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl...
Alexandre Neto
03:02 AM Bug report #5758 (Reopened): Primary key issue when using merge attributes of selected features tool
I still have this problem with "merge attributes of selected features".
I'm trying to make it work in a Postgis tabl...
Alexandre Neto
02:52 AM Feature request #8537 (Closed): snap when measuring
I can confirm that snapping works (at least on master) also for measuring tools. Giovanni Manghi
02:52 AM Feature request #8537 (Closed): snap when measuring
I can confirm that snapping works (at least on master) also for measuring tools. Giovanni Manghi
02:51 AM Feature request #8495: lat-long graticule on projected map
Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m...
Giovanni Manghi
02:51 AM Feature request #8495: lat-long graticule on projected map
Antonio Locandro wrote:
> Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected m...
Giovanni Manghi
02:47 AM Feature request #7208: replace the "merge shapefiles" code with new more efficient one (python co...
Antonio Locandro wrote:
> Any updates on this?
nope.
Giovanni Manghi
02:44 AM Bug report #5896: Identify of WMS layers does not work

> I added a new description/title to this ticket to makes things a little more clear. It seems that overall things a...
Giovanni Manghi
02:17 AM Bug report #9433: Error in DB Manager reading toplogy.layer
No idea, sorry - I just noticed that the error is gone when connecting from master Paolo Cavallini
02:14 AM Bug report #9433: Error in DB Manager reading toplogy.layer
No backport ?

:'(
Any pointer to the fixing commit, in case anyone is willing to backport ?
Sandro Santilli
01:54 AM Bug report #9433: Error in DB Manager reading toplogy.layer
Yes. However, a test revealed that in master the problem does not show off. As no backporting will be done, I think t... Paolo Cavallini
01:44 AM Bug report #9433: Error in DB Manager reading toplogy.layer
Does the user you connect as have permissions to read topology.layer ? Sandro Santilli
01:20 AM Bug report #9433 (Closed): Error in DB Manager reading toplogy.layer
Clicking on topology.layer of a postgis_topology DB consistently returns
an error. PostGIS 2.1.1. Tested on Debian un...
Paolo Cavallini
02:05 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
I do not test this case use, but this patch
https://github.com/qgis/QGIS/pull/1114
can fix this issue
Alvaro
Alvaro Huarte
02:02 AM Feature request #4136 (Closed): Symbolizing field from a table joined to a joined table
Bernhard Ströbl
01:57 AM Bug report #7780: Incorrect number of rows when testing layer filter expression
I would not mind passing this issue to "Feature". And if there is no better solution, we could inform the user that h... Alexandre Neto
01:45 AM Bug report #9434 (Closed): DB Manager versioning: language "SQL" does not exist
Activating versioning in DB Manager throws an error:
language "SQL" does not exist
QGIS 2.0.1, on Debian and Window...
Paolo Cavallini
01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...
Seems fixed. Please reopen if necessary. Paolo Cavallini
01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...
Seems fixed. Please reopen if necessary. Paolo Cavallini
01:33 AM Bug report #3496 (Closed): Print Composer in QGIS 1.6.0 does no longer select the rows of the vis...
Seems fixed. Please reopen if necessary. Paolo Cavallini
01:32 AM Feature request #6985 (Closed): Export print layout as image with world file
AFAIK, this has been implemented. Reopen if necessary. Paolo Cavallini
01:32 AM Feature request #6985 (Closed): Export print layout as image with world file
AFAIK, this has been implemented. Reopen if necessary. Paolo Cavallini
01:19 AM Feature request #8868: Don't show provider specific layer data source string
Then to avoid more confusion I suggest to just remove the whole "Layer source" field.
Currently the is no universal ...
Martin Dobias

2014-01-26

12:50 AM Bug report #9429: slow selection of features
Hi Alvaro, thanks for looking into this long standing and painful issue.
Does this
#9348
duplicates this ticket?
...
Giovanni Manghi
11:58 PM Bug report #9429 (Reopened): slow selection of features
Reopened to enable ids validation in new optional parameter:
QgsVectorLayer::setSelectedFeatures( const QgsFeatureId...
Alvaro Huarte
05:45 PM Bug report #9429 (Closed): slow selection of features
Alvaro Huarte
05:35 PM Bug report #9429: slow selection of features
Nathan Woodrow wrote:
> I agree the check is not needed. We have the ids and if they are not in the layer then they j...
Alvaro Huarte
05:16 PM Bug report #9429: slow selection of features
I agree the check is not needed. We have the ids and if they are not in the layer then they just don't get selected n... Nathan Woodrow
04:42 PM Bug report #9429 (Closed): slow selection of features
Any selection of features in QGIS calls to 'QgsVectorLayer::setSelectedFeatures' and from this commit (#39fab67e602aa... Alvaro Huarte
12:49 AM Bug report #5896: Identify of WMS layers does not work
Radim Blazek wrote:
> The bug in master (will be 2.1), i.e. crash if format is feature and OTFR is no was fixed by co...
Giovanni Manghi
12:46 AM Bug report #9432 (Closed): Points In Polygons: New column should be integer not real
Maybe I'm missing something, but if we are doing a count the result will always be a whole number so the data type of... Chris Brown
12:09 AM Bug report #9431: Crash When Using Relationships with Large PostGIS Tables
Jeremy - I am not the developer of this feature. But yes - currently, the tables are all fetched to the client and th... Andreas Neumann
06:08 PM Bug report #9431 (Closed): Crash When Using Relationships with Large PostGIS Tables
Does this feature support large relationship tables from a database? I tried to build a relationship between PostgreS... Jeremy Palmer
11:23 PM Bug report #9050 (Closed): Cannot add a scalebar in meters of project is wgs84
I'll close this issue as it's implemented in master.
However, the implementation is currently somewhat confusing as ...
Mathieu Pellerin - nIRV
11:20 PM Bug report #9050 (Feedback): Cannot add a scalebar in meters of project is wgs84
Isn't this fixed in master? Paolo Cavallini
04:40 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
This kind of behaviour is available in other COTS software, I don't know if people actually pay attention that it cou... Antonio Locandro
11:20 PM Feature request #8537: snap when measuring
The snap settings are taken from digitizing options Paolo Cavallini
05:12 PM Feature request #8537: snap when measuring
@paolo, how do you enable this? I tried measurement yesterday and it didn't snap at all. I was under the impression t... Antonio Locandro
11:11 PM Bug report #8068: Wrong font display in qgis server
It's blocker. We can not use the server > 1.8. Evgeniy Nikulin
06:14 PM Feature request #8711: Please add decent North arrows
Hi !
A google-images search on "north arrows" gives a lot of ideas.
Please add only very simple, clean and pro-loo...
Olivier Dalang
05:14 PM Feature request #8711: Please add decent North arrows
I guess adding arrows would mean generating SVG for them right? If someone can point me in the right direction and pr... Antonio Locandro
05:59 PM Bug report #9371: Paste Features as New Vector Layer/New Memory Vector layer fails with bigint co...
I also get a problem with int4 columns from a PostGIS source. Error is "Cannot create field id (int4,int)". PostGIS s... Jeremy Palmer
05:26 PM Bug report #9430 (Closed): Disable "Paste Features as New Layer" if empty clipboard
The new "paste features as new layer" feature should be disabled if the clipboard is empty.
Also see #9083
In addit...
Jeremy Palmer
05:16 PM Feature request #9381: Print composer: add option for point grid
I think a few more options should be added apart from what its proposed, currently only zebra option and another I ca... Antonio Locandro
05:11 PM Feature request #8495: lat-long graticule on projected map
Hi at our office we make aeronautical charts and we used Lat/Lon graticule on a projected map in other COTS software,... Antonio Locandro
05:08 PM Feature request #7208: replace the "merge shapefiles" code with new more efficient one (python co...
Any updates on this? Antonio Locandro
05:07 PM Feature request #6499: Allow choose the default measurement units to use
Yes I think this would be useful Antonio Locandro
05:05 PM Feature request #5516: Better sorting of menus
I would think the new UI/UX user list would be able to comment on this topic and reach a resolution, hopefully for 2.... Antonio Locandro
05:04 PM Feature request #4950: Progress bar when export print-layout to image/pdf
I think this would be an awesome addition, maybe Nyall can look into it Antonio Locandro
05:03 PM Feature request #4852: Add gdal2xyz.py to GdalTools
any updates? do you think this could be done for 2.2 or 2.4 Antonio Locandro
03:23 PM Bug report #9060: Area is wrong in QGIS master (again)
Hi, this patch fix the ellipsoid and units selection in the project properties dialog. The current settings are prese... Alvaro Huarte
02:01 PM Bug report #9060 (Feedback): Area is wrong in QGIS master (again)
Rhenriques Henriques wrote:
> Nyall is right! I've only tested in projects with projected units. The settings are not...
Giovanni Manghi
03:10 PM Bug report #8818: "value map" widget broken
> Alvaro Huarte wrote:
> > One question about another issue:
> > Why QGIS does not draw current selected features as ...
Alvaro Huarte
12:56 PM Bug report #8818: "value map" widget broken
Giovanni Manghi wrote:
> ... I have seen the correct values (the ones defined in the "value" column of the map), but...
Alvaro Huarte
02:48 AM Bug report #8818: "value map" widget broken
Alvaro Huarte wrote:
> >
> > I have tested your patched QGIS and unfortunately it is still not working.
>
> Very we...
Giovanni Manghi
02:31 PM Bug report #9169 (Closed): Grass raster values not identified properly
closing for lack of feedback Giovanni Manghi
02:31 PM Bug report #9169 (Closed): Grass raster values not identified properly
closing for lack of feedback Giovanni Manghi
02:30 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
I could (partially) revert commit:5c38775 which could probably help here. But this would in turn reintroduce bug #926... Matthias Kuhn
02:16 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
Matthias Kuhn wrote:
> Is it a regression?
it seems faster in qgis 2.0.1
Giovanni Manghi
01:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
Is it a regression? Matthias Kuhn
01:41 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme...
Giovanni Manghi
01:41 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
dr - wrote:
> Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu).
confirme...
Giovanni Manghi
02:25 PM Bug report #8451 (Closed): "Transform error caught: forward transform of..." while editing on qgi...
The original issue described in this ticket seems gone in the latest master. Giovanni Manghi
02:25 PM Bug report #8451 (Closed): "Transform error caught: forward transform of..." while editing on qgi...
The original issue described in this ticket seems gone in the latest master. Giovanni Manghi
12:37 PM Bug report #9112 (Closed): QGIS master crashes on Linux when editing Spatialite layers with OTFR on
seems to work as expected on the latest master. Giovanni Manghi
12:37 PM Bug report #9112 (Closed): QGIS master crashes on Linux when editing Spatialite layers with OTFR on
seems to work as expected on the latest master. Giovanni Manghi
12:31 PM Bug report #7209 (Closed): WCS client seems broken
Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa...
Giovanni Manghi
12:31 PM Bug report #7209 (Closed): WCS client seems broken
Radim Blazek wrote:
> Unfortunately it can also mean that the bug is still there but does not manifest.
I understa...
Giovanni Manghi
12:28 PM Bug report #7822 (Open): Export to Spatialite is really slow, compared to commandline ogr2ogr
Alexander Bruy wrote:
> Still cannot confirm. Export takes several seconds.
Hi Alex,
I can confirm the issue at so...
Giovanni Manghi
12:03 PM Bug report #8820 (Closed): "Value map" edit widget appears to have the value of the first value i...
seems ok on master. Please reopen if necessary. Giovanni Manghi
12:03 PM Bug report #8820 (Closed): "Value map" edit widget appears to have the value of the first value i...
seems ok on master. Please reopen if necessary. Giovanni Manghi
11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps
I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression.
Giovanni Manghi
11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps
I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression.
Giovanni Manghi
11:55 AM Bug report #9378 (Open): QGIS crash when editing WFS layers with overlaps
I can confirm it, as already said on qgis 32bit, not 64.
And does not happen on QGIS 1.8, so it is a regression.
Giovanni Manghi
11:34 AM Bug report #9088 (Open): Text Annotation Symbols size is wrong in map composer
Giovanni Manghi
11:32 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105...
Giovanni Manghi
11:24 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105...
Alvaro Huarte
05:45 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...
Alvaro, I can still make the polygon layer (shapefile) disappear, as of revision 105ecfa8. Disabling simplify geometr... Mathieu Pellerin - nIRV
11:22 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons
Closing for lack of feedback/sample data to replicate. Giovanni Manghi
11:22 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons
Closing for lack of feedback/sample data to replicate. Giovanni Manghi
11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...
Giovanni Manghi
11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...
Giovanni Manghi
11:20 AM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> So this issue would need a separate ticket, or eventually change the title and description of this one.
I'm closi...
Giovanni Manghi
11:02 AM Bug report #8734 (Closed): Bug on dfx2shp plugin
Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th...
Giovanni Manghi
11:02 AM Bug report #8734 (Closed): Bug on dfx2shp plugin
Sandro Eduardo Nobrega wrote:
> If i just add the dfx file as a layer and then save it as shp it doesn't crash...
Th...
Giovanni Manghi
10:58 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer
Still true? Giovanni Manghi
10:58 AM Bug report #8400: crash opening layer properties of a freshly inserted wms layer
Still true? Giovanni Manghi
10:56 AM Bug report #8332 (Open): QGIS uses comma as decimal separator for shapefile attribute data
Giovanni Manghi
10:54 AM Bug report #8707 (Closed): Doens't load most of the layers.
Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary. Giovanni Manghi
10:54 AM Bug report #8707 (Closed): Doens't load most of the layers.
Closing for lack of feedback and lack of sample data to allow us replicate the issue. Please reopen if necessary. Giovanni Manghi
10:51 AM Bug report #7624 (Closed): QGIS crashes when pressing OK on the heatmap dialog
Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat...
Giovanni Manghi
10:51 AM Bug report #7624 (Closed): QGIS crashes when pressing OK on the heatmap dialog
Aren Cambre wrote:
> Just want to confirm I am still seeing this behavior. If I don't hit *...* and select a file pat...
Giovanni Manghi
10:41 AM Bug report #8979 (Open): Crashing WFS in 32bit Windows Install
Giovanni Manghi
10:39 AM Bug report #8438 (Open): WMT-S Crashes when loading layer
Giovanni Manghi
10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool
Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ...
Giovanni Manghi
10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool
Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ...
Giovanni Manghi
10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool
Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ...
Giovanni Manghi
10:37 AM Bug report #8433 (Open): Repeated Crash - Spatial Query tool
Now I can also see the crash in both Linux and Windows using qgis master.
The operation works ok on QGIS 1.8, so it ...
Giovanni Manghi
10:24 AM Bug report #5239 (Open): TIN interpolation causes crash
Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi...
Giovanni Manghi
10:24 AM Bug report #5239 (Open): TIN interpolation causes crash
Marco Hugentobler wrote:
> This wasn't working in 1.8 too, so shouldn't be a blocker.
> Btw., it obviously is somethi...
Giovanni Manghi
10:17 AM Bug report #8821 (Closed): bug print, create pdf and pictures
closing for lack of details, impossible to understand precisely what is the issue and how replicate it. Giovanni Manghi
10:17 AM Bug report #8821 (Closed): bug print, create pdf and pictures
closing for lack of details, impossible to understand precisely what is the issue and how replicate it. Giovanni Manghi
10:13 AM Bug report #7113 (Closed): QGS project files containing openlayers layers make QGIS crash when op...
Giovanni Manghi
10:12 AM Bug report #7113: QGS project files containing openlayers layers make QGIS crash when openlayers ...
closing for lack of feedback. Giovanni Manghi
10:13 AM Bug report #7607 (Closed): Crash after importing a vector layer to db using DBManager
Giovanni Manghi
10:13 AM Bug report #7607: Crash after importing a vector layer to db using DBManager
closing for lack of feedback. Giovanni Manghi
09:23 AM Bug report #9428 (Open): Transparency of markers in marker line is neither applied nor stored
The GUI for markers in a marker line has a transparency slider but the setting is not applied to the markers in the p... Anita Graser
09:06 AM Bug report #7736 (Closed): data defined rotation does not work for point pattern fills
Fixed in changeset commit:"3c5c7de3023c9ec2e9daa4d74b4846fd3e35caad". Radim Blazek
08:28 AM Bug report #7177: Composer's legend "all" button does not take "lock layers" into account
Done in pull request https://github.com/qgis/QGIS/pull/1113 Olivier Dalang
06:21 AM Bug report #9427 (Closed): Legend and scale refer to "Map 3", but there is no way to know which o...
Hi !
Composer Legends and Composer Scales refer to a particular map.
This map is selected by the user with a drop d...
Olivier Dalang
06:00 AM Bug report #9397: Project's CRS is not written properly in the project's file
Great, thanks ! I set done to 100% and hope it will be merged soon ! Olivier Dalang
04:28 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master
Giovanni Manghi wrote:
> >
> > Hi Giovanni, if I create the spatial index and update the extent from layer properti...
Alvaro Huarte
04:24 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master
Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor...
Giovanni Manghi
04:24 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master
Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > after making a whatever editing operation the vectors do render cor...
Giovanni Manghi
04:17 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master
Giovanni Manghi wrote:
> after making a whatever editing operation the vectors do render correctly, so maybe after al...
Alvaro Huarte
02:27 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master
Hi, I have tested the data and ArcView 3.1 crash! I edited the code for QGIS does not use the current map extent to f... Alvaro Huarte
02:01 AM Bug report #9426: layers not rendered (or partially rendered) in qgis master
after making a whatever editing operation the vectors do render correctly, so maybe after all is a data issue(?). Not... Giovanni Manghi
01:32 AM Bug report #9426 (Closed): layers not rendered (or partially rendered) in qgis master
I just compiled from source the latest code and have issues with the attached vectors (try zoom in).
This does not s...
Giovanni Manghi
02:56 AM Bug report #8883: The svg path don't work on datadefined property - SVG file
In commit:f4a7fcb I also added rendering of missing SVG symbol, currently question mark ('?'), in case an SVG file do... Radim Blazek
02:19 AM Bug report #8883 (Closed): The svg path don't work on datadefined property - SVG file
Fixed in changeset commit:"55727f755afac80243433141d8ae74bf2b5734db". Radim Blazek
01:54 AM Bug report #9425: grass_script.bat always fails if USERNAME contains MBCS
I'm sorry, the report explains 2 bugs.
Former is "Windows batch file which ends LF can't process MBCS". Attached patc...
Tarot Osuji
01:27 AM Bug report #9425 (Closed): grass_script.bat always fails if USERNAME contains MBCS
On Windows, if USERNAME contains Multi Byte Character Set, processing with GRASS (grass_script.bat) always fails.
The...
Tarot Osuji
01:53 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
please note that the values in the column used for ordering are not (over)written after pressing "save", anyway even ... Giovanni Manghi
01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi
01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi
01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi
01:50 AM Bug report #9424: Attribute table editing writes simultaneously in the selected column for sorting
Confirmed in master, a huge regression that must be fixed before the new release. Giovanni Manghi
01:46 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master
If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete...
Giovanni Manghi
01:46 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master
If compiling from source the parameters are ok.
Maybe is something in the master/ubuntugis build, there the paramete...
Giovanni Manghi
01:28 AM Bug report #8487 (Closed): manual CRS being overwritten by QGIS
Giovanni Manghi
01:24 AM Bug report #8487: manual CRS being overwritten by QGIS
Yes you can close it, thanks all. The original issue as well as the related issues brought up in the discussion are a... Gavin Fleming
01:10 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Further info: loaded rasters can in general be loaded, whereas those resulting from in-db elaborations (e.g., aspect ... Paolo Cavallini

2014-01-25

12:49 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
I can show rasters, except for those registered out-of-db (-R) Paolo Cavallini
03:03 PM Bug report #9424 (Closed): Attribute table editing writes simultaneously in the selected column ...
When editing the Attribute table of a vector layer writing the value in a column will automatically update that value... Bogdan Hlevca
10:53 AM Feature request #9373: Support for UDP connections in GPS Widget
Dear all:
I've made a PR !#1112 regarding to this issue. I hope that everything is OK, but I have some doubts with t...
jtornero -
09:00 AM Bug report #6212 (Closed): Incorrect sorting of uppercase and accented words in the "Style -> Cat...
Reopen if necessary. Giovanni Manghi
09:00 AM Bug report #6212 (Closed): Incorrect sorting of uppercase and accented words in the "Style -> Cat...
Reopen if necessary. Giovanni Manghi
02:59 AM Bug report #6212: Incorrect sorting of uppercase and accented words in the "Style -> Categorized"...
Actually I cannot confirm in master - for me the sorting is case insensitive and respects accented characters (see at... Martin Dobias
04:25 AM Bug report #8818: "value map" widget broken
>
> I have tested your patched QGIS and unfortunately it is still not working.
Very weird! I follow step by step yo...
Alvaro Huarte
01:09 AM Bug report #8818 (Open): "value map" widget broken

> Done:
> http://www.filedropper.com/qgis-osgeo4w-210-i8818-setup-x86
Hi Alvaro, many thanks for your time!
I hav...
Giovanni Manghi
02:12 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
greatest, latest, and most regressing one ... (assumption, not verified, but made with high experience of the matter) Sandro Santilli
02:10 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
Sandro, considering QGIS 2.2 is (planned) to be released in less than a month, might simply be better to update to th... Mathieu Pellerin - nIRV
02:07 AM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
Could this be backported to 2.0 branch too ? Sandro Santilli
01:38 AM Bug report #8975 (Closed): line pattern fill: the style is applied to symbol border and not to li...
Giovanni Manghi
01:28 AM Bug report #9423 (Closed): QgsGeometry.asMultiPoint() returns wrong values
Fixed in changeset commit:"781e34a5bc690df4c1868bbc1b35cfdda0eb25da". Jürgen Fischer
01:15 AM Bug report #9423: QgsGeometry.asMultiPoint() returns wrong values
QGIS 2.0.1 also returns correct values. I get wrong results with master version (eaf5725). Minoru Akagi
01:09 AM Bug report #9423 (Closed): QgsGeometry.asMultiPoint() returns wrong values
Tested with this code:... Minoru Akagi
01:18 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)
If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th... Giovanni Manghi
01:18 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)
If it works fine in the dev version of qgis, then this is considered fixed because there are no backports. Instead th... Giovanni Manghi

2014-01-24

12:36 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Agreed, no migration should be necessary Paolo Cavallini
10:02 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...

> I am leaving this open for this last problem, but I am not going to fix that.
I'm personally ok with this. When a...
Giovanni Manghi
09:42 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Regarding backward compatibility. This was obviously buggy in 2.0 and I am not convinced that we have to keep backwar... Radim Blazek
09:07 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Vertical and horizontal markers lines fixed in commit:c21973f.
The longest interval is taken as pattern length. Smal...
Radim Blazek
07:34 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Color/width: removed from QgsLinePatternFillSymbolLayerWidget in commit:95c3c6f because such options (for sub symbols... Radim Blazek
03:43 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
This issue has common background with #8974, some problems you may find testing this issue were fixed there. Radim Blazek
05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels
Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer
05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels
Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer
05:33 PM Bug report #9393 (In Progress): impossible to select "regular" font style for labels
Confirmed here on Mac, too. That is fixed, but I found a related issue with font 'named styles' and am working on a s... Larry Shaffer
05:15 PM Bug report #8818: "value map" widget broken
Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a...
Alvaro Huarte
01:47 PM Bug report #8818: "value map" widget broken
Giovanni Manghi wrote:
> Matthias Kuhn wrote:
> > I don't know, if this PR really fixes the described problem. If I a...
Alvaro Huarte
07:38 AM Bug report #8818: "value map" widget broken
Matthias Kuhn wrote:
> I don't know, if this PR really fixes the described problem. If I am not mistaken, this proble...
Giovanni Manghi
07:33 AM Bug report #8818 (Feedback): "value map" widget broken
Matthias Kuhn
07:33 AM Bug report #8818: "value map" widget broken
I don't know, if this PR really fixes the described problem. If I am not mistaken, this problem is related to the val... Matthias Kuhn
04:00 PM Bug report #9421 (Closed): Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
Fixed in changeset commit:"eaf5725f569fab62a67a51c0b0bddbb6a44797a2". Jürgen Fischer
03:00 PM Bug report #9421: Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
Note that this is a regression. Version 1.8.0 works fine, showing a single entry with the correct SRID (0) and the co... Sandro Santilli
01:51 PM Bug report #9421 (Closed): Cannot edit PostGIS tables with SRID=0 (multipolygon considered polygon)
Multipolygon PostGIS tables with unknown srid (0) appear twice in the "Add PostGIS Layer" dialog, once with a SRID pr... Sandro Santilli
11:59 AM Bug report #9420 (Closed): Bad WMS display (EPSG:2972)
The French Guiana RGFG95/UTM22N projection (EPSG:2972) is bad defined. This seems to be corrected under the dev versi... Julien LARSENEUR
10:40 AM Bug report #9419 (Closed): Jenks natural breaks has a bad interval
Running Jenks classification on results in the last interval with an erroneous upper bound value. See attached pic. D... Sophia Parafina
07:57 AM Bug report #9418 (Closed): towgs84 parameters vanished from CRSs in qgis master
In qgis master there are CRSs (at least the ones I'm used to use, from Portugal and Italy) that are now missing the t... Giovanni Manghi
07:08 AM Bug report #4417 (Feedback): editing widgets: "slider range" and "dial range" do not show any val...
What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then...
Giovanni Manghi
07:08 AM Bug report #4417 (Feedback): editing widgets: "slider range" and "dial range" do not show any val...
What is the status of the PR?
By the way: in qgis master the dial control seems gone, and if selecting "slider" then...
Giovanni Manghi
07:04 AM Bug report #8487 (Feedback): manual CRS being overwritten by QGIS
Gavin Fleming wrote:
> bug appears to be fixed in 2.1.0 Master (though the new north-oriented CRS definitions Tim add...
Giovanni Manghi
06:21 AM Bug report #9357: Lots of PostGIS connections with a standalone python script
An update.
I decided to take a look at the connections that were being sent to PostGIS while my script was running u...
James Stott
06:11 AM Bug report #9413: Misalignment after raster clipping
Giovanni Manghi wrote:
> interesting, what others tools (if any) would benefit from this parameter?
Only gdalwarp us...
Etienne Tourigny
05:40 AM Bug report #9413: Misalignment after raster clipping
Etienne Tourigny wrote:
> Probably needs an argument like -tap
interesting, what others tools (if any) would benefit...
Giovanni Manghi
04:57 AM Bug report #9413: Misalignment after raster clipping
Probably needs an argument like -tap Etienne Tourigny
02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping
Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
...
Giovanni Manghi
02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping
Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
...
Giovanni Manghi
02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping
Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
...
Giovanni Manghi
02:21 AM Bug report #9413 (Feedback): Misalignment after raster clipping
Does it happens if you launch the command (that shows in the bottom of the clip tool dialog) from the command line?
...
Giovanni Manghi
05:42 AM Bug report #9196: WMTS and CRS issue
WFS seems to be fine. Jonathan Moules
05:41 AM Bug report #9196: WMTS and CRS issue
Note: A similar thing also seems to happen with WMS. Rather than zoom to the bounding box of the layer (try "z_OS_Ras... Jonathan Moules
05:34 AM Feature request #8898: "Save vector layer as" - limit export
Thinking about it more, it needs to be able to allow multiple possible exports:
Selected / All
Visible / All
And an...
Jonathan Moules
04:50 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version
> today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success... Giovanni Manghi
04:50 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version
> today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have success... Giovanni Manghi
04:47 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Hello,
today we've tried to install the QGIS in a different directory. We used "c:\\prog_pessoal\\..." and we have su...
Marisa Silva
02:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Marisa Silva wrote:
> Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in ad...
Giovanni Manghi
04:48 AM Feature request #8868: Don't show provider specific layer data source string
Jonathan Moules wrote:
> I'd suggest therefore that it shouldn't be shown. Instead it should show the server name tha...
Giovanni Manghi
04:40 AM Feature request #8868: Don't show provider specific layer data source string
I'd suggest therefore that it shouldn't be shown. Instead it should show the server name that has been connected to. ... Jonathan Moules
03:41 AM Feature request #8868: Don't show provider specific layer data source string
The information in the field is actually right - for all data providers it displays the internal resource identifier.... Saber Razmjooei
03:35 AM Feature request #8868: Don't show provider specific layer data source string
The WMS query shown is wrong on a number of levels:
1) It doesn't start with the URL, but ends with it as a paramete...
Jonathan Moules
03:40 AM Bug report #8974: line pattern fill: at specific distance between lines it shows an undesired (re...
Hopefully fixed, please test.
There were other skeletons in the closet like misalignement on offset, missing line m...
Radim Blazek
03:35 AM Bug report #8974 (Closed): line pattern fill: at specific distance between lines it shows an unde...
Fixed in changeset commit:"3fd75ac403c65976d75930c575fc5a20eab4f10b". Radim Blazek
01:15 AM Bug report #9417 (Closed): 0d2c564 Breaks master
Fixed in changeset commit:"760529bd7fd1c63ae5cc93ab3fd9392a68e0fda2". Jürgen Fischer

2014-01-23

12:39 AM Bug report #9417 (Closed): 0d2c564 Breaks master
I am building with master (a30a9dd) and it fails when I use:
//MODIFIED property for variable: WITH_PYSPATIALITE
WIT...
Tim Sutton
11:31 PM Bug report #9036: db manager's spatialite node gone in latest qgis master
Ok, so problem was indeed my very old osgeo4w setup executable. The spatialite node now works when installing qgis ma... Mathieu Pellerin - nIRV
09:16 PM Bug report #9036: db manager's spatialite node gone in latest qgis master
Alexander confirmed via IRC that on his machine, both the 32-bit and 64-bit osgeo4w qgis master packages do not exhib... Mathieu Pellerin - nIRV
05:27 PM Bug report #9416: Problem compiling QGIS in visual studio
Thanks Jürgen! Alvaro Huarte
05:02 PM Bug report #9416 (Closed): Problem compiling QGIS in visual studio
Fixed in changeset commit:"a78a0035ac397c72cdbf878f69eb0060bd4fed66". Jürgen Fischer
03:38 PM Bug report #9416: Problem compiling QGIS in visual studio
May be 'QScopedPointer::swap' ( http://qt-project.org/doc/qt-5.0/qtcore/qscopedpointer.html#swap ) ?
Alvaro Huarte
03:28 PM Bug report #9416 (Closed): Problem compiling QGIS in visual studio
I can not build QGIS in visual studio when this commit is applied: commit:e8205c98c938b60569c30d5c0bbec3acab1f441a
t...
Alvaro Huarte
08:38 AM Bug report #8068: Wrong font display in qgis server
Hi,
can we expect this issue to be fixed in version 2.2? It would really be appreciated. We havn't upgraded our produ...
Karl-Magnus Jonsson
06:51 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution....
Radim Blazek
06:51 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
aperi2007 - wrote:
> How many pixel is the tiles size ?
>
> The problem you report could be due to video resolution....
Radim Blazek
05:32 AM Bug report #9415 (Closed): Problem with current Debian build
In debian rules file, section: install: build
perl -i -pe 's=#!/usr/bin/env python=#!/usr/bin/python2.7=;' $(find de...
Andy Wood
05:25 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Yes we have a policy. The 1st machine we did with power user privileges the 2nd we did it in administrator account an... Marisa Silva
05:22 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Marisa Silva wrote:
> Sorry, where can I view that information?
> I've already performed uninstall and install again,...
Giovanni Manghi
05:19 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Sorry, where can I view that information?
I've already performed uninstall and install again, also installed in anoth...
Marisa Silva
05:11 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Have a look at your installation logs.
Might be that the installation was broken before the CRS synchronization at t...
Andre Joost
03:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can...
Marisa Silva
03:23 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Hello,
thanks for the answer. In attach there's an image of the coordinate selector (coordSelector.png) where you can...
Marisa Silva
05:05 AM Bug report #9414 (Closed): Custom CRS with units=mm stored as units=m
I try to set up a custom CRS with
@+proj=tmerc +lat_0=51.4 +lon_0=7.0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0...
Andre Joost
04:36 AM Bug report #9397: Project's CRS is not written properly in the project's file
I updated the CRS properties management in this pull request, this should solve the issue: https://github.com/qgis/QG... Leyan Ouyang
02:11 AM Bug report #9413 (Closed): Misalignment after raster clipping
After clipping of a raster with a vector mask layer using the "gdalwarp -q -cutline" function, the clipped raster sho... Pascal Fust

2014-01-22

12:17 AM Feature request #9412: add a "minimum characters to wrap" option to labels
An alternative to this (maybe more intuitive) would be to implement a wordwrap() function in the expression builder:
...
Mathieu Pellerin - nIRV
11:38 PM Feature request #9412 (Closed): add a "minimum characters to wrap" option to labels
It would be really useful for label's multiple lines formatting to be able to set a minimum number of characters for ... Mathieu Pellerin - nIRV
07:20 PM Feature request #9411 (Closed): qgis composer item X, Y position values should be relative to page
Right now, the X and Y position value of an item is a value that reflects the absolute position within the qgis compo... Mathieu Pellerin - nIRV
02:20 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Hi Andreas
Thank you so much for the reply. The problem happens with or without spatial index. Tested both situation...
Rhenriques Henriques
12:35 PM Bug report #9348: Selection of thousands of points very slow in QGIS2
Does the point shapefile have a spatial index. Can you share the data so we can test the issue? Andreas Neumann
01:18 PM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...
There is that. But maybe the tool in the Raster Menu was designed that way because of some use case?
Anyway, it's im...
Filipe Dias
01:14 PM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...
Filipe Dias wrote:
> Giovanni Manghi wrote:
> > The different stats are explained because all the pixels that have 0 ...
Giovanni Manghi
01:09 PM Bug report #9400 (Reopened): "Clip raster by mask layer" produces different results than "Clipper...
Giovanni Manghi wrote:
> The different stats are explained because all the pixels that have 0 value are evidently cou...
Filipe Dias
12:52 PM Bug report #9400 (Closed): "Clip raster by mask layer" produces different results than "Clipper" ...
The different stats are explained because all the pixels that have 0 value are evidently counted in the stats (that d... Giovanni Manghi
03:05 AM Bug report #9400: "Clip raster by mask layer" produces different results than "Clipper" from Rast...
SAGA 2.10/"Clip grid with polygon" produced a raster with the same statistics as the output from "clip raster with ma... Filipe Dias
02:57 AM Bug report #9400 (Closed): "Clip raster by mask layer" produces different results than "Clipper" ...
I tried clipping a raster with "Clipper" from the Raster Menu and "Clip with mask layer" from the Processing Toolbox ... Filipe Dias
12:49 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master
Assuming that you are using the column "Average.Depth" to create the categorized symbology, then the "." in the colum... Giovanni Manghi
12:36 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master
Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i...
Simon Dedman
12:36 PM Bug report #9394: Non-'Single Symbol' styles hide the layer in Master
Sample data attached.
Interesting about the blank column - thanks for the info, I assumed it was connected to this i...
Simon Dedman
12:29 PM Bug report #9394 (Feedback): Non-'Single Symbol' styles hide the layer in Master
I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac... Giovanni Manghi
12:29 PM Bug report #9394 (Feedback): Non-'Single Symbol' styles hide the layer in Master
I cannot confirm the issue (with both a CSV point layer and the derived vorony polygons) in QGIS master. Please attac... Giovanni Manghi
12:45 PM Bug report #9408: Layer disappears when zoomed in past 'layer extent'
If you have evidence that qgis creates bad indexes or that corrupts them, then please file a new ticket. Giovanni Manghi
12:43 PM Bug report #9408 (Closed): Layer disappears when zoomed in past 'layer extent'
Source of problem: my meddling with the shapefile had caused a ".qix" file to be created. Overwriting the spoiled fil... Simon Dedman
10:58 AM Bug report #9408 (Feedback): Layer disappears when zoomed in past 'layer extent'
I would be happy to test the data: giovanni DOT manghi AT faunalia DOT pt Giovanni Manghi
09:00 AM Bug report #9408 (Closed): Layer disappears when zoomed in past 'layer extent'
Hi all.
I have a problem with a vector shapefile sent to me from the British Oceanography Data Centre (so I assume ...
Simon Dedman
12:28 PM Bug report #8615: Python error on startup (Windows 64-bit)
Thanks Jurgen, will do. Simon Dedman
12:09 PM Bug report #8615: Python error on startup (Windows 64-bit)
Simon Dedman wrote:
> Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.
>
> [...]...
Jürgen Fischer
11:42 AM Bug report #8615: Python error on startup (Windows 64-bit)
Same for me, 2.0.1 64 bit Win7, also on the master I believe; had this a long while.... Simon Dedman
12:00 PM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...
If you use the full file path as key, this is what gets stored in the settings, and this does NOT work.
connections\...
Etienne Tourigny
11:43 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...
Changing the way connection are stored in settings requires some thinking, in order to not break things.
Perhaps an...
Etienne Tourigny
11:03 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...
Hi ! Thanks for quick reaction !!
Actually, I sometimes need specifically to have two spatialite databases with the ...
Olivier Dalang
10:39 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...
Added warning in commit fbdf34c2b26e90f7c6e077eb54be53cae03d100f - and previous connection is preserved.
Setting thi...
Etienne Tourigny
10:01 AM Bug report #9404: Browser can only connect to one spatialite file of several files sharing the sa...
It seems to me this is by design and would be hard to change. sqlite connections are stored in QGIS2.conf like this,... Etienne Tourigny
03:41 AM Bug report #9404 (Closed): Browser can only connect to one spatialite file of several files shari...
Hi !
If you have two spatialite files with the same name but in different folders, you can only connect to one using...
Olivier Dalang
11:55 AM Bug report #9244 (Closed): Paste in place doesn't work across pages anymore
Fixed in changeset commit:"9aa4155e36c01e4fb5f851faa44a05c8764c4279". Nyall Dawson
03:47 AM Bug report #9244: Paste in place doesn't work across pages anymore
Steps to reproduce (tested in 06b1fbc):
1) create a new file
2) create a new composer
3) set number of pages to 2
4)...
Olivier Dalang
11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached
Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi
11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached
Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi
11:15 AM Bug report #9395: WFS layers time out, even though the timeout is not reached
Yes, it happens many times and the timeout option does not seems to have any effect. Giovanni Manghi
11:13 AM Bug report #9409: CRS not recognized in Dufour 2.0.1 64 bit version
Hi Marisa
As Giovanni, I'm not having any issues with any portuguese CRS with the same version under Windows or MacO...
Rhenriques Henriques
10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version
Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ...
Giovanni Manghi
10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version
Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ...
Giovanni Manghi
10:56 AM Bug report #9409 (Feedback): CRS not recognized in Dufour 2.0.1 64 bit version
Hi Marisa,
I'm using the very same version of qgis, on the same platform as well as the qgis development version on ...
Giovanni Manghi
10:39 AM Bug report #9409 (Closed): CRS not recognized in Dufour 2.0.1 64 bit version
Hello,
I've installed QGIS Dufour 2.0.1 (in a windows 7 professional at 64 bit) with: "QGIS-OSGeo4W-2.0.1-3-Setup-x86...
Marisa Silva
11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts
Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi
11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts
Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi
11:11 AM Bug report #9392 (Feedback): Ortho Projection produces artifacts
Maybe the issue described in paragraph 12.1.6 (of the QGIS 2.0) user manual does help solve the issue? Giovanni Manghi
11:06 AM Feature request #3249 (Closed): SVG marker selection by user
Giovanni Manghi
11:05 AM Bug report #8975 (Reopened): line pattern fill: the style is applied to symbol border and not to ...
Giovanni Manghi
09:55 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels
Hi Nyall, if you are testing a postgis layer, then these error comes from a bug in ST_Simplify function of postgis ( ... Alvaro Huarte
03:43 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels
Hi Nyall, the pull #1087 was merged, can you test your issue please ?
Alvaro Huarte
05:26 AM Feature request #9406: Add option to remove duplicate labels
the option is much alike the one for lines, that allows not repeat the label of connected lines. In this case would a... Giovanni Manghi
04:28 AM Feature request #9406 (Closed): Add option to remove duplicate labels
It is sometimes useful to remove duplicate labels from the map. The remaining label can be placed over one of the fea... Giovanni Manghi
04:22 AM Feature request #6091 (Closed): Add a "recent used" expressions list in field calculator
Fixed in changeset commit:"5c1fed5b2eb0f6c4dc30e39abd12f11a750d5f32". Anonymous
04:01 AM Feature request #9405 (Closed): differentiate between built-in plugins and user plugins
Hi !
I find it unclear for the user that user-installed plugins and built-in plugins are not differentiated at all...
Olivier Dalang
03:38 AM Feature request #9403 (Open): Listing "project's databases" in DBManager and in Browser
Hi !
Currently, to open a database in DBManager, you must first create a connection to it in the Browser.
Why not a...
Olivier Dalang
03:24 AM Feature request #9402 (Closed): Make the new Field Calculator tool available in the Modeler
It would be great to able to use the excellent new Field Calculator tool in the Modeler. At the moment only the old F... Filipe Dias
03:01 AM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...
Fixed in changeset commit:"12a463d2b06d5f10b94d4143c86465d8c4b0ecad". Jürgen Fischer
02:48 AM Feature request #9399 (Closed): Print Composer / Atlas generation - scale settings
Let the Atlas generator respect scale settings defined under "Project
properties" --> "General" --> "Project scales" ...
Bo Victor Thomsen
01:08 AM Bug report #9356 (Feedback): Atlas print does nto respect composition page size, orientation
Tim,
How are you exporting the composition? Are you using the built-in pdf export option or printing to a pdf driver...
Nyall Dawson

2014-01-21

12:55 AM Bug report #8705: Duplication of Composer should inherit custom paper size
Larry,
How'd you go with your fix for the other settings? Do you have a public branch I can test?
Nyall Dawson
12:51 AM Feature request #9398 (Closed): map overview in composer with different coordinate systems
In the map composer, if the overview and the principal map use 2 different coordinate systems, the overview rectangle... julie -
12:51 AM Bug report #9244 (Feedback): Paste in place doesn't work across pages anymore
I can't replicate this... are you able to re-test and give me steps to reproduce it? Thanks! Nyall Dawson
11:42 PM Bug report #9342 (Closed): composer regression - expressions in text items are not evaluated
Fixed in changeset commit:"2e4fbc21a62129e62b0702f9e87f5dd86809c710". Nyall Dawson
11:42 PM Bug report #8958 (Closed): when pasting composer item(s) move / resize tool should automatically ...
Fixed in changeset commit:"befe56ff1be31dd1ef522de5d514a393394a951a". Nyall Dawson
07:20 PM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
IMO, this needs to be re-opened as follow-up clean ups are needed:
1/ *Saved symbols that relies on line pattern fil...
Mathieu Pellerin - nIRV
04:34 PM Bug report #9397 (Closed): Project's CRS is not written properly in the project's file
Hi !
The project's CRS seems to be written in two places in a QGIS file : in the <properties>/<SpatialRefSys> block ...
Olivier Dalang
01:00 PM Bug report #9393: impossible to select "regular" font style for labels
Borys Jurgiel wrote:
> Is it the default font in Ubuntu? If so I'd set the bug priority to High.
>
Yes - it's the d...
Nyall Dawson
04:19 AM Bug report #9393: impossible to select "regular" font style for labels
Is it the default font in Ubuntu? If so I'd set the bug priority to High.
Btw. The same problem with DejaVu Sans on ...
Borys Jurgiel
03:25 AM Bug report #9393: impossible to select "regular" font style for labels
I confirm problem on my system too. Mathieu Pellerin - nIRV
02:47 AM Bug report #9393 (Closed): impossible to select "regular" font style for labels
Here's a strange one... Using Ubuntu, it's impossible to select the "Regular" variant of the "Ubuntu" font in label p... Nyall Dawson
12:11 PM Bug report #8615: Python error on startup (Windows 64-bit)
Just received the same error on a QGIS 2.0.1 64-bit install on Win8.1 Eric Compas
10:11 AM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks
Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
Rhenriques Henriques
10:11 AM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks
Problem Solved! Today's NB from Larry Shaffer works flawlessly.
Cheers
Rhenriques Henriques
09:21 AM Bug report #9396 (Closed): deactivate the Select datum transformations dialog by default
I'd classify the current behavior as a serious usability issue. Here is why:
* Most users are happy with the defaul...
Anita Graser
07:23 AM Bug report #9395 (Closed): WFS layers time out, even though the timeout is not reached
Whenever I open existing projects containing WFS layers, I often get errors like this in the log, and the layer is ma... Jacob Madsen
05:50 AM Feature request #9373: Support for UDP connections in GPS Widget
--------- THIS MESSAGE IS OLD AND SORT OF NONSENSE AND YOU CAN SKIP IT TO THE NEXT ONE -----------
Well, this is wha...
jtornero -
05:21 AM Feature request #3249: SVG marker selection by user
Well, AFAIK it works already... should it be closed?
Best regards
jtornero -
05:06 AM Bug report #8426 (Closed): Transparency mangles WMS layers
This can be closed. Appears to be working now (master). Jonathan Moules
04:17 AM Bug report #3975: PDF exports on OSX always convert text to outlines
See:
https://github.com/qgis/QGIS/pull/1096
Vincent Mora
03:45 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project
Good morning,
in attached you'll find a zip with the project, a shp layer and the html file used in the map composer...
Mathieu Bossaert
02:48 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project
Can you please share a project which is showing this behaviour? Nyall Dawson
02:58 AM Bug report #9394 (Closed): Non-'Single Symbol' styles hide the layer in Master
Hi all,
I've just posted this problem on gis.stackexchange "here":https://gis.stackexchange.com/questions/83522/grad...
Simon Dedman
01:45 AM Bug report #9392 (Closed): Ortho Projection produces artifacts
I`m trying to create a sphere-like view using qgis and the "world from space"-projection http://spatialreference.org/... achim tack

2014-01-20

12:44 AM Bug report #9374: Print Composer - html frame stays empty when re-opening the project
Good morning Giovanni,
I still have the problem with last nightly version form osgeo4w (00c8196)
Mathieu Bossaert
01:47 PM Bug report #9374 (Feedback): Print Composer - html frame stays empty when re-opening the project
Can you test QGIS master and report back? Thanks! Giovanni Manghi
12:29 AM Bug report #8975 (Closed): line pattern fill: the style is applied to symbol border and not to li...
Paolo Cavallini
12:16 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
IMHO the problem will be apparent with any device: the discontinuity between adjacent tiles will always be visible un... Paolo Cavallini
12:12 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Yes the border problem seem resolved.
>The problem is, that current implementation is based on tiles (QgsImageFillSy...
aperi2007 -
12:05 AM Bug report #9388 (Closed): rpad doesn't work
Nathan Woodrow
11:52 PM Bug report #9388: rpad doesn't work
Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t... Tobias Schneider
11:52 PM Bug report #9388: rpad doesn't work
Ok now I feel like an idiot. I had "number formatting" switched on (because I thought it is a number). That is what t... Tobias Schneider
11:36 PM Bug report #9388: rpad doesn't work
Nathan Woodrow wrote:
> What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
>
> This is my output in ...
Tobias Schneider
02:57 PM Bug report #9388: rpad doesn't work
What does: @rpad('1',3,'0') || ' ' || lpad('1', 3, '0')@ give you?
This is my output in 2.0: @001 100@ and in master...
Nathan Woodrow
09:22 AM Bug report #9388: rpad doesn't work
Also posted this here previously: http://gis.stackexchange.com/questions/83338/how-to-format-labels-with-leading-zeroes Tobias Schneider
09:18 AM Bug report #9388 (Closed): rpad doesn't work
When I try to use the "rpad" function to label point features, it doesn't add any padding symbols. The function "lpad... Tobias Schneider
09:50 PM Bug report #9391 (Closed): Implement human readable listings for WMT-S titleset styles
Within the "Style" column of the Tileset table on the add WMTS layer dialog, ensure that the WMTS get capabilities l... Jeremy Palmer
02:48 PM Bug report #9390 (Closed): Today's NB crashes immediately under MacOSX Mavericks
Today's QGIS NB crashes before open under MacOSX Mavericks.
Cheers
Rhenriques Henriques
02:28 PM Bug report #9378: QGIS crash when editing WFS layers with overlaps
Appears frequently on the 32-bit Windows version, no matter if the Windows OS itself is 32- or 64-bit Jacob Madsen
02:25 PM Bug report #9378 (Feedback): QGIS crash when editing WFS layers with overlaps
does not happem on qgis master 64bit/linux.
Does happen on master/Windows?
Giovanni Manghi
03:45 AM Bug report #9378 (Closed): QGIS crash when editing WFS layers with overlaps
Please open the attached project file with QGIS 2.0.1 32-bit in Windows. Login is:
Username: vejlby
Password: testjy...
Jacob Madsen
02:03 PM Bug report #9376: QGIS crash on sorting attribute columns on WFS layers.
Confirmed on Linux 64bit/master... Giovanni Manghi
02:03 PM Bug report #9376: QGIS crash on sorting attribute columns on WFS layers.
Confirmed on Linux 64bit/master... Giovanni Manghi
03:28 AM Bug report #9376 (Closed): QGIS crash on sorting attribute columns on WFS layers.
Steps to reproduce:
Open attached project file in QGIS 2.0.1 32- or 64-bit. Login with
Username vejlby
Password tes...
Jacob Madsen
02:00 PM Bug report #9369 (Feedback): "duplicate layer" takes ages to duplicate spatialite layers
I'm not able to replicate, it would be possible to attach sample data/project? Giovanni Manghi
02:00 PM Bug report #9369 (Feedback): "duplicate layer" takes ages to duplicate spatialite layers
I'm not able to replicate, it would be possible to attach sample data/project? Giovanni Manghi
01:54 PM Bug report #7472 (Closed): vector editing errors
Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post...
Giovanni Manghi
01:54 PM Bug report #7472 (Closed): vector editing errors
Simon Dedman wrote:
> Hi all, apologies for reopening if this isn't the best way of raising this.
>
> I've just post...
Giovanni Manghi
01:45 PM Bug report #8818: "value map" widget broken
Matthias Kuhn wrote:
> Giovanni, any progress on this?
Hi Matthias,
these days I'm not able (lack of time, sleep de...
Giovanni Manghi
03:11 AM Bug report #8818: "value map" widget broken
Giovanni, any progress on this? Matthias Kuhn
01:34 PM Feature request #9385 (Closed): Print composer - Construction Lines
Giovanni Manghi
12:58 PM Feature request #9385: Print composer - Construction Lines
Nyall Dawson wrote:
> This is already possible - you can drag a line from the ruler to add a snap line at any positio...
Nicholas Duggan
12:08 PM Feature request #9385 (Feedback): Print composer - Construction Lines
This is already possible - you can drag a line from the ruler to add a snap line at any position on the page. Is that... Nyall Dawson
06:24 AM Feature request #9385 (Closed): Print composer - Construction Lines
The print composer could really do with a way to align all the map features, this is done in many software (CAD, ArcG... Nicholas Duggan
01:33 PM Feature request #9380 (Closed): Print composer grid options - No option for grid colour change
Giovanni Manghi
01:02 PM Feature request #9380: Print composer grid options - No option for grid colour change
Agreed, please remove Nicholas Duggan
12:12 PM Feature request #9380 (Feedback): Print composer grid options - No option for grid colour change
This is currently possible - click the "Line Style" button in the grid properties. Nyall Dawson
05:09 AM Feature request #9380 (Closed): Print composer grid options - No option for grid colour change
Within the QGIS 2.0.1 print composer, there are options to have either a line or cross graticule grid on the map fram... Nicholas Duggan
01:33 PM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame
Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap...
Giovanni Manghi
01:33 PM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame
Nicholas Duggan wrote:
> Hi Nyall,
>
> So far with the vector data I've tried, I haven't seen any issue, it would ap...
Giovanni Manghi
01:07 PM Bug report #9383: Print Composer - Map Frame contents does not fill frame
Hi Nyall,
So far with the vector data I've tried, I haven't seen any issue, it would appear it is predominantly the ...
Nicholas Duggan
12:09 PM Bug report #9383 (Feedback): Print Composer - Map Frame contents does not fill frame
Hmm... looks like you are using the OpenLayers plugin in your map, is this correct? Can you please confirm whether yo... Nyall Dawson
05:59 AM Bug report #9383 (Closed): Print Composer - Map Frame contents does not fill frame
Contents of map frame doesn't fully fill frame (see attached image).
This works on the same PC (Windows 8.1) within 1...
Nicholas Duggan
12:04 PM Bug report #9389 (Closed): Identify Feature - not possible to scroll horizontally
I have the problem, that in the "Identify Feature" window, I can't scroll to the right side at a large row.
QGIS: 2....
Antoine Guerin
11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...
I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer
11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...
I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer
11:08 AM Bug report #4297: Cmake file on MacOS is biased to use KyngChaos binaries regardless of user pref...
I am looking into using CMake's new-ish *BundleUtilites* ("docs":http://www.cmake.org/cmake/help/v2.8.11/cmake.html#m... Larry Shaffer
08:20 AM Bug report #9386 (Closed): [processing] v.sample fails when creating intermediate table
cleaning unnecessary fields does the trick. Closing the issue, this is totally a grass's one. Regis Haubourg
08:15 AM Bug report #9386: [processing] v.sample fails when creating intermediate table
Error occurs in GRASS native GUI... May be a OSGEO4W trouble? Regis Haubourg
08:12 AM Bug report #9386: [processing] v.sample fails when creating intermediate table
Well, I tested in grass plugin, and same error. Processing is not to be blamed though..
Not sure I must move to gra...
Regis Haubourg
06:35 AM Bug report #9386 (Closed): [processing] v.sample fails when creating intermediate table
Hi, v.sample fails when creating temp table of sampling points.
It seemed to wrok in processing version of december ...
Regis Haubourg
07:07 AM Bug report #3975: PDF exports on OSX always convert text to outlines
I'm interested in adding export non-vectorized text as an option to the svg export.
Larry:is it the way to go ?
Vincent Mora
06:43 AM Feature request #9387 (Closed): Print Composer - Coordinate system as expression
The addition of dynamic text through expressions in QGIS 2 is awesome! Unfortunately I still need to fill out the coo... Nicholas Duggan
05:17 AM Feature request #9381 (Closed): Print composer: add option for point grid
Within the current QGIS Print Composer, there are only the options to use a line grid or cross grid symbol. I believe... Nicholas Duggan
04:36 AM Bug report #9379 (Closed): QGIS crash when opening certain WFS projects
Attached file was created on QGIS 2.0.1 64-bit. When it's opened in QGIS 2.0.1 32-bit, QGIS crashes with a minidump a... Jacob Madsen
04:34 AM Bug report #9375: Simplification causes GEOS exceptions when layer has labels
Hi Nyall, are you using current master ? I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52... Alvaro Huarte
03:12 AM Bug report #9375 (Closed): Simplification causes GEOS exceptions when layer has labels
I'm running into an issue with the new rendering simplification option. With this enabled on a layer which has labels... Nyall Dawson
03:40 AM Bug report #9377 (Closed): WMS getfeatureinfo result dialog not rendered ok and disappears
Both in current testing and 2.0.1 (here on Debian), I have troubles with the WMS getfeatureinfo output.
It defaults ...
Richard Duivenvoorde
02:55 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> I think we should close it when the polygon layer not rendered issue is fixed (which...
Alvaro Huarte
02:52 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
I think we should close it when the polygon layer not rendered issue is fixed (which occurs when simplify geometry is... Mathieu Pellerin - nIRV
02:39 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> Alvaro, @nirvn is me :)
Argggggggg, sorry, I have not noticed.
Then Can I close thi...
Alvaro Huarte
02:37 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro, @nirvn is me :) Mathieu Pellerin - nIRV
02:27 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Mathieu, @nirvn commented that layers disappears in the extreme zoomed out scales even with simplification disable... Alvaro Huarte
02:40 AM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields
As soon as you install the updated OGR on your machine, QGIS will make use of it, even if you still run QGIS 2.0. The... Matthias Kuhn
02:31 AM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields
@Matthias: The OGR side seems to be fixed. Can you have a look at our own code? Or do you know whom to ask? Will QGIS... Anita Graser
02:25 AM Feature request #9373: Support for UDP connections in GPS Widget
Hello,
What kind of specs should be needed (ports, hosts...?
AFAIK It depends a lot on the R/V, but basically the m...
jtornero -
02:03 AM Feature request #9373: Support for UDP connections in GPS Widget
Could you include pointers to any specs please? Jürgen Fischer

2014-01-19

12:40 AM Bug report #9374 (Closed): Print Composer - html frame stays empty when re-opening the project
Good morning to everyone,
I am facing a little problem with html frame in the map composer.
It is very helpful and p...
Mathieu Bossaert
12:12 AM Feature request #9373 (Open): Support for UDP connections in GPS Widget
Sometimes NMEA data (not only GPS but sounders, etc) data is feeded through UDP datagrams. This is common, for insta... jtornero -
11:56 PM Feature request #9372 (Closed): More uniform CRS selector
CRS slector is different in many dialogs. See e.g. Save as... dialogs for raster and for vectors.
The raster solution...
Paolo Cavallini
04:39 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Mathieu Pellerin - nIRV wrote:
> Alvaro, the first project attached to this issue works much, much better with your ...
Alvaro Huarte
02:13 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Giovanni, thanks, I know it, I am conversing with Jürgen Fischer, the commit (#3305a6c77903f1ef9cce012f52ff49c8e35... Alvaro Huarte
02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g...
Giovanni Manghi
02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g...
Giovanni Manghi
02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g...
Giovanni Manghi
02:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro Huarte wrote:
> Hi Mathieu,
>
> I have released a new pull request that I hope to be merged soon.
> https://g...
Giovanni Manghi
02:50 PM Bug report #9371 (Closed): Paste Features as New Vector Layer/New Memory Vector layer fails with ...
The new "Paste Features As" doesn't correctly handle PostGIS layers with a bigint columns. Attempting to paste featur... Nyall Dawson
12:07 PM Bug report #9370 (Closed): QGIS guesses wrong CRS when units are us-feet
Full discussion under http://osgeo-org.1560.x6.nabble.com/gdal-dev-gdalinfo-coordinates-problem-td5098718.html
Sampl...
Andre Joost
11:36 AM Bug report #7735 (Reopened): QgsProject.writeEntry bugs with line endings
Hi ! It seems the bug reappeared (or never really disappeared ?!!).
It affects the "save query" feature of the DB ma...
Olivier Dalang
11:23 AM Bug report #7039: Use message bar for handling bad layers
I very much agree !
The fact that layers which are currently unavailable are deleted upon opening a project is a big...
Olivier Dalang
09:46 AM Bug report #9369 (Closed): "duplicate layer" takes ages to duplicate spatialite layers
Hi !
When duplicating spatialite layers using the "Duplicate layer" command from the contextual menu, it takes somet...
Olivier Dalang
06:28 AM Bug report #7472 (Reopened): vector editing errors
Hi all, apologies for reopening if this isn't the best way of raising this.
I've just posted this problem on gis.sta...
Simon Dedman

2014-01-18

12:46 AM Bug report #7368: QGIS writing out incorrect .prj file
Confirm such behavior on latest master. dr -
04:35 PM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Mathieu,
I have released a new pull request that I hope to be merged soon.
https://github.com/qgis/QGIS/pull/1087...
Alvaro Huarte
04:48 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...
Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil... Mathieu Pellerin - nIRV
04:48 AM Bug report #9360 (Reopened): serious regression: whole layer not rendered (when simplify geometry...
Alvaro, the first project attached to this issue works much, much better with your patch applied (although I can stil... Mathieu Pellerin - nIRV
03:04 PM Feature request #9368 (Closed): Print Composer Map Label and Texture Rotation
Currently, when map rotation is specified in the print composer, everything on the map is rotated, including labels a... Matthew Petroff
11:43 AM Feature request #9366: Allow scale values < 1 in composer map items
Petras Jokubauskas wrote:
> **Should I assign myself to this issue?
No, I'll tackle it after feature freeze. Should...
Nyall Dawson
03:35 AM Feature request #9366: Allow scale values < 1 in composer map items
It is possible to crash Qgis using Print composer in state as it is now, so at first it is bug report.
However it is...
Petras Jokubauskas
03:01 AM Feature request #9366 (Open): Allow scale values < 1 in composer map items
Giovanni Manghi
01:27 AM Feature request #9366 (Feedback): Allow scale values < 1 in composer map items
Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts?
Giovanni Manghi
01:27 AM Feature request #9366 (Feedback): Allow scale values < 1 in composer map items
Hi Petras,
is this a bug report, a suggestion for improvement or food for thoughts?
Giovanni Manghi
04:10 AM Feature request #9367 (Closed): allow setting smaller scale bar in composer Scalebar items
hello,
this is connected a bit with #9366, but this post is just about scalebar alone.
At this moment, thanks to rest...
Petras Jokubauskas
02:09 AM Bug report #9267 (Rejected): Plus button for Default datum transformations doesn't work
Works in master Alexander Bruy
02:09 AM Bug report #9267 (Rejected): Plus button for Default datum transformations doesn't work
Works in master Alexander Bruy
02:05 AM Bug report #4819 (Reopened): "Identify Features" tool is slow with complex/big features (lot of n...
Jürgen Fischer
01:32 AM Bug report #4819: "Identify Features" tool is slow with complex/big features (lot of nodes)
see also http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030315.html Giovanni Manghi

2014-01-17

12:36 AM Feature request #9366: Allow scale values < 1 in composer map items
why does it made citation? Petras Jokubauskas
12:32 AM Feature request #9366 (Closed): Allow scale values < 1 in composer map items
Hello everybody,
this is my first post, sorry if it is too big,
I am geologist/ petrologist and use QGIS not only for...
Petras Jokubauskas
09:08 AM Bug report #8975: line pattern fill: the style is applied to symbol border and not to line fills,...
Partially fixed in commit:8f8ea0e, the line symbol layer is now used for fill, outline is not drawn (like with point ... Radim Blazek
09:00 AM Bug report #9361 (Closed): 2.1 core dump on loading 1.9 project
Fixed in changeset commit:"c2a8ad0a35894418d98ccc44b02f3b8e8f89de86". Jürgen Fischer
03:05 AM Bug report #9361: 2.1 core dump on loading 1.9 project
here's the project file Gavin Fleming
08:27 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
> I also see the layer-not-rendered issue with polygon layer too. Is the patch covering this case too?
Hi Mathieu, ...
Alvaro Huarte
06:51 AM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...
Fixed in changeset commit:"8c9f41cfa1e6e8cc6625a3436756e3b29754142c". Jürgen Fischer
06:40 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Alvaro, that was fast :)
I don't have a build environment ready to test patch :/ can certainly verify when its comm...
Mathieu Pellerin - nIRV
06:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro
Alvaro Huarte
06:03 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Hi Mathieu, can you test this patch please ?
https://github.com/qgis/QGIS/pull/1086
Thanks in avance
Alvaro
Alvaro Huarte
01:20 AM Bug report #9360: serious regression: whole layer not rendered (when simplify geometry activated)
Note: the regression was spotted on a linux (Ubuntu 13.10) machine, not tested on windows yet. Mathieu Pellerin - nIRV
05:05 AM Feature request #9362: Export PDF layers from QGIS map composers
To note that QGIS "can" already export (from the canvas, not the composer) as geopdf: the format is supported in gdal... Giovanni Manghi
03:48 AM Bug report #9060: Area is wrong in QGIS master (again)
Hi, I release a new pull request (https://github.com/qgis/QGIS/pull/1071) it attempts to correct this error.
Can you...
Alvaro Huarte
03:26 AM Bug report #9365: QGIS save as SLD style for graduated styled layer different from what it's show...
Please consider this pic as IMAGE 2 - Geoserver Output Saved SLD stefano nardone
03:22 AM Bug report #9365 (Closed): QGIS save as SLD style for graduated styled layer different from what ...
I've found that when applying a graduated style to a layer in QGIS, if I save the style as SLD to use it in my Geoser... stefano nardone
02:33 AM Feature request #9352: update 7 parameter transformation fir Israel ITM grid
This should be reported to the Proj4 bug tracker, because QGIS takes all CRS from there.
Proj4 only uses valid EPSG ...
Andre Joost
01:22 AM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper
Alvaro Huarte wrote:
> Hi Bernt, this patch was merged to master.
> Next release will contain it!
>
> Best Regards
>...
Bernt Rane

2014-01-16

12:51 AM Feature request #9364 (Open): Provide a UI for creating custom Projection
I often have to work with data, which is my Country's statutory projection. This is a custom LCC Projection, which do... Devdatta Tengshe
12:42 AM Feature request #9363 (Open): Buffer tool should provide a way of using Units other than data sou...
Often I have data in Geographic Lat-long and want to buffer them to 1km or something similar.
The current way to do...
Devdatta Tengshe
12:38 AM Feature request #9362: Export PDF layers from QGIS map composers
Feels the same as #8771 speaks about geopdf but it would be more safe to call it as geospatial pdf because GeoPDF is ... Jukka Rahkonen
12:25 AM Feature request #9362 (Open): Export PDF layers from QGIS map composers
As in the attached image.
PDF layers are formally known as Optional Content Groups.
"They represent a collection o...
Asier Sarasua
12:15 AM Bug report #9361: 2.1 core dump on loading 1.9 project
Can you share the 1.9 project file? Jürgen Fischer
10:04 PM Bug report #9361 (Closed): 2.1 core dump on loading 1.9 project
QGIS 2.1 nightly build crashed on loading a 1.9 project file. So I starting it as root and it now showed a bad WMS la... Gavin Fleming
08:38 PM Bug report #9360 (Closed): serious regression: whole layer not rendered (when simplify geometry a...
A very serious regression has made its way into QGIS master following the (2nd) simplify geometry commits. Whole laye... Mathieu Pellerin - nIRV
12:47 PM Bug report #9359 (Closed): The WCS client don't seem to refresh the cache
Using the client wcs from last trunk,
I notice that the client wcs with the option "always-cache" use a local cached ...
aperi2007 -
11:51 AM Bug report #9345 (Closed): WMS axis ordering depending on CRS a 2.0 rollout stopper
Hi Bernt, this patch was merged to master.
Next release will contain it!
Best Regards
Alvaro
Alvaro Huarte
10:12 AM Bug report #9358 (Closed): Qgis 2.1 for Mac isn't able to save Project on a server share (Ubuntu ...
If I open a project located on a server share, Qgis creates immediately a new file in the project location with the s... Riccardo Casoli
06:19 AM Bug report #9357 (Closed): Lots of PostGIS connections with a standalone python script
I have a standalone python script that creates a bunch of PDFs for me.

Recently this script has developed an issu...
James Stott
05:55 AM Bug report #9356 (Closed): Atlas print does nto respect composition page size, orientation
Hi
I've been testing the atlas updates here. One thing I got stuck with is that although I set the composition page ...
Tim Sutton
05:15 AM Bug report #9355 (Closed): Export/add geometric column terribly slow
Even in the case of points (no complex calculations to do), it takes hours for half a million points (on a slow machi... Paolo Cavallini
04:53 AM Bug report #7209: WCS client seems broken
Giovanni Manghi wrote:
> yeah I know, this is why I wrote "apparently". Anyway now I tested also under Windows and ap...
Radim Blazek
04:05 AM Bug report #7209: WCS client seems broken
Radim Blazek wrote:
> The last considerable change in WCS client was 3 months ago, so I have no idea how it got broke...
Giovanni Manghi
03:07 AM Feature request #9326: Tolerance (snapping) during analyses
Probably this could be solved with a new command, allowing the user to arbitrarily reduce the precision of coordinate... Paolo Cavallini
01:18 AM Feature request #9352 (Closed): update 7 parameter transformation fir Israel ITM grid

Please update +towgs84 parameter for the Israel ITM grid (EPSG:2039).
The 7 parameter transformation is officia...
Michael Davis

2014-01-15

12:46 AM Feature request #9351 (Open): Load GPX: do not load empty layers
When loading a GPX, by default tracks, routes, and waypoints are loaded, even if empty. For the user it mey be diffic... Paolo Cavallini
12:38 AM Bug report #7209: WCS client seems broken
"Always-cache" is also used for get capabilities, if the request failed the first time (during the server configurati... Radim Blazek
11:35 PM Bug report #7209: WCS client seems broken
Using the client wcs from last trunk,
I notice that the option "always-cache" don't seem work. It return always a mes...
aperi2007 -
10:05 AM Bug report #7209: WCS client seems broken
The last considerable change in WCS client was 3 months ago, so I have no idea how it got broken and cured itself in ... Radim Blazek
05:58 AM Bug report #7209: WCS client seems broken

> I've really very difficulties to make crashing my QGIS (Linux - 0ca7316), please could you say to me what I should...
Giovanni Manghi
05:54 AM Bug report #7209: WCS client seems broken
Paolo Cavallini wrote:
> In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly b...
Giovanni Manghi
05:51 AM Bug report #7209: WCS client seems broken
Giovanni Manghi wrote:
> On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and...
Salvatore Larosa
05:41 AM Bug report #7209: WCS client seems broken
In case it is not fixed in time for QGIS 2.2, I suggest to remove it: shipping a knowingly broken service will not be... Paolo Cavallini
12:12 AM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper
Alvaro Huarte wrote:
> Hi Bernt, I propose this pull request:
> https://github.com/qgis/QGIS/pull/1081
>
> Can you t...
Bernt Rane
05:21 PM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper
Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro
Alvaro Huarte
05:21 PM Bug report #9345: WMS axis ordering depending on CRS a 2.0 rollout stopper
Hi Bernt, I propose this pull request:
https://github.com/qgis/QGIS/pull/1081
Can you test it ?
Alvaro
Alvaro Huarte
05:28 AM Bug report #9345 (Closed): WMS axis ordering depending on CRS a 2.0 rollout stopper
The move in wms 1.3.0 to a more strict axis ordering and a changed behaviour from qgis 1.8 to 2.0 is turning into a m... Bernt Rane
11:21 PM Bug report #9324 (Closed): Regression: Inference lines in composer no longer appear
Yes the lines that appear when you move an object around on the layout to show if they are aligned.
I tested on OSX ...
Tim Sutton
10:44 PM Bug report #9349: QGis Zonal Statistics Plugin NoData included in Calculations
Why not adding a very small portion of the raster? Paolo Cavallini
11:42 AM Bug report #9349: QGis Zonal Statistics Plugin NoData included in Calculations
Could not upload the files due to size limitations Jason Tokayer
11:40 AM Bug report #9349 (Closed): QGis Zonal Statistics Plugin NoData included in Calculations
I have an ESRI raster file (w001001.adf) with a NoData value of -32768 and otherwise non-negative data. I have a vect... Jason Tokayer
06:53 PM Feature request #9339: Do not print setting for composer layer
At the moment I have a duplicate composer layout as a work around with the alignment image on. I delete the image use... James Harvey
06:51 PM Feature request #9339: Do not print setting for composer layer
Yes similar to that item, but not just labels. Would be for objects like images placed and items like lines and other... James Harvey
11:42 AM Bug report #9350 (Closed): reprojected postgresql layers are plotted with offset and very slow
Running QGIS master as of 2014-01-15, Postgis 2.1.1, osm2pgsql 0.85.0_20140107
Attached is a screenshot which displa...
Thomas Baumann
11:17 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
The same applies to the editing of values in the attribute table. Rhenriques Henriques
10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Then tagging as a regression. Giovanni Manghi
10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Then tagging as a regression. Giovanni Manghi
10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Then tagging as a regression. Giovanni Manghi
10:59 AM Bug report #9348: Selection of thousands of points very slow in QGIS2
Then tagging as a regression. Giovanni Manghi
10:51 AM Bug report #9348 (Closed): Selection of thousands of points very slow in QGIS2
The selection of thousands of points from a 5 million point shapefile takes ages to process and eventually crashes QG... Rhenriques Henriques
09:40 AM Bug report #9320: Weird behavior when creating columns from a joined table
Confirmed on Linux with QGIS master commit:48afac3 Alexander Bruy
09:35 AM Bug report #7822: Export to Spatialite is really slow, compared to commandline ogr2ogr
Still cannot confirm. Export takes several seconds. Alexander Bruy
09:34 AM Bug report #9101: Raster artefact in composer pdf export
Summary:
* QGIS was working well, writing RGBA 0,0,0,0 for transparent pixels, but there is a bug in Acroba Reader s...
Radim Blazek
09:23 AM Bug report #9101 (Closed): Raster artefact in composer pdf export
Fixed in changeset commit:"00efc467844fc710e12a4ab7a64b3fc76b133ad2". Radim Blazek
04:32 AM Bug report #9101: Raster artefact in composer pdf export
For raster artefacts on left / right border I have created new issue #9343. Radim Blazek
09:25 AM Bug report #9343 (Closed): Raster artefacts on data / no data border
Fixed in commit:00efc46784.
This bug was caused by first attempts to fix #9101.
Radim Blazek
05:03 AM Bug report #9343: Raster artefacts on data / no data border
The artefacts have the same color as RGB part of QgsRasterRenderer::NODATA_COLOR = qRgba( 255, 255, 255, 0 ). It mean... Radim Blazek
04:22 AM Bug report #9343 (Closed): Raster artefacts on data / no data border
Artefacts appear within raster extent on the left/right side of no null data and on the left / right side of raster e... Radim Blazek
08:05 AM Bug report #9317: OTB Band Math error with Processing (sextante) modeler
Apparently, this problem is only for the QGIS 2 version 64 bits... ken oz
06:01 AM Feature request #9346 (Closed): DBManager allow to add non geographical queries to canvas
Hi,
FastSQLayer allowed adding non geographic query results in QGIS. This is very handy for join/relates, adding sta...
Regis Haubourg
05:59 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
Paolo Cavallini wrote:
> If this works in master, it can indeed be closed. Reopen if necessary.
it is not fixed, but...
Giovanni Manghi
05:47 AM Bug report #8592 (Closed): Field Calculator: Nonsense values for $area and $perimeter
If this works in master, it can indeed be closed. Reopen if necessary. Paolo Cavallini
04:53 AM Feature request #9344 (Closed): Queries saving in DBManager
Wouldn't be nice to have the possibility to store the queries written in DBManager either in the project file OR in Q... didier peeters
03:20 AM Feature request #9340: Bordering polygons dash and dot outline not rendering systematically
Fair enough. It is possible to achieve that through conversion to lines and removing overlaps. I thought other softwa... Miroslav Umlauf
01:11 AM Feature request #9340: Bordering polygons dash and dot outline not rendering systematically
Your wish is understandable but I guess it is hard to fulfill. Polygons are separate shapes so at the common borders ... Jukka Rahkonen
02:56 AM Bug report #9342: composer regression - expressions in text items are not evaluated
Oh, just forgot, shouldn't we add some unit test to avoid such important regressions? Regis Haubourg
02:55 AM Bug report #9342: composer regression - expressions in text items are not evaluated
Ok!, BTW all you did in composer is just great in production use! Regis Haubourg
01:14 AM Bug report #9342: composer regression - expressions in text items are not evaluated
This was a consequence of the new atlas preview mode. I realise now I've forgotten to take into account the fact that... Nyall Dawson
02:25 AM Feature request #8261 (Resolved): Put focus on "password" field when adding a PostGIS table
solved #10db5770c4c159763f77c972b4ba4b82f02a4b20 Denis Rouzaud

2014-01-14

12:49 AM Bug report #9342 (Closed): composer regression - expressions in text items are not evaluated
Expressions in text items (like writting current date) are no more evaluated in composer. Expression builder do evalu... Regis Haubourg
12:39 AM Feature request #9065 (Closed): Support for nautical miles and more rational scalebars in composer
implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83 Jürgen Fischer
12:39 AM Feature request #9065 (Closed): Support for nautical miles and more rational scalebars in composer
implemented in commit:4fd3b1fb076aae2ad2e60460e33f39833b8cad83 Jürgen Fischer
07:30 PM Feature request #9065 (Resolved): Support for nautical miles and more rational scalebars in composer
Nyall Dawson
08:47 PM Bug report #9341 (Closed): Polygon outline offset
When using offset for polygon outline it creates overhang of outlines in starting (ending) node of polygon. Miroslav Umlauf
08:40 PM Feature request #9340 (Open): Bordering polygons dash and dot outline not rendering systematically
When there are adjacent (bordering) polygons with the same dashed/dotted outline in one layer it should be rendered a... Miroslav Umlauf
07:29 PM Feature request #9339: Do not print setting for composer layer
James - is this a duplicate of #4357? Does that match what you're after? Nyall Dawson
06:46 PM Feature request #9339: Do not print setting for composer layer
Have a look for a plugin called Layer Combinations. It will allow you to create combinations of layers which you can... Nathan Woodrow
06:41 PM Feature request #9339 (Closed): Do not print setting for composer layer
It would be good to have a tick box on each layout composer item for "Do not print" layer. Like setting some layers i... James Harvey
06:23 PM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.
This is real useful because this is the only way in Qgis to save a geo-referenced image, more exactly to get a world ... baditaflorin -
06:16 PM Bug report #8273: Attributes not loaded from kml/kmz file
I can confirm the same bug with QGIS 2.0.1 on windows.
baditaflorin -
06:16 PM Bug report #8273: Attributes not loaded from kml/kmz file
I can confirm the same bug with QGIS 2.0.1 on windows.
baditaflorin -
06:40 AM Bug report #9335 (Closed): Widgets: impossible to input a time
In the field properties, it is possible to add a Calendar widget, selecting a date/time format. However, the widget o... Paolo Cavallini
06:38 AM Bug report #9334 (Closed): Value widget: set default step at 1
the current default for step in the range widget is 0, which seems inappropriate. Please set it at 1 Paolo Cavallini
04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
duplicate of #9012 #8998 and probably more Giovanni Manghi
04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
duplicate of #9012 #8998 and probably more Giovanni Manghi
04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
duplicate of #9012 #8998 and probably more Giovanni Manghi
04:42 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
duplicate of #9012 #8998 and probably more Giovanni Manghi
02:20 AM Bug report #9332 (Closed): Size of symbols when exporting in jpeg (or pdf, ...)
In the print composer, I make a wonderfull layout.
Then I try to export it (the format doesn't matter, the problem e...
Sarah De Laet
04:13 AM Feature request #6484 (Closed): Atlas: support for multiple maps
Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f". Nyall Dawson
04:13 AM Feature request #9248 (Closed): Atlas - Using the same coverage layer multiple times in a sheet.
Fixed in changeset commit:"6bb9dfec00a2906996c3f7af2718b3c4388e128f". Nyall Dawson
02:47 AM Bug report #8437: db manager don't load esri personal geodb to postgis single feature instead of ...
The problem can be extended to all datasources containing multi and single objects. If faced it with a shape2postgis ... Regis Haubourg

2014-01-13

12:17 AM Feature request #9330 (Closed): Rotate Rendered Map Canvas
Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0.... Bjorn Nyberg
12:15 AM Bug report #9329 (Closed): Rotate Rendered Map Canvas
Bjorn Nyberg
12:12 AM Bug report #9329 (Closed): Rotate Rendered Map Canvas
Add an option in the settings dialog to rotate the rendered map canvas by a user specified angle relative to North 0.... Bjorn Nyberg
11:10 PM Bug report #9328 (Closed): Path requires Return to be saved
When adding a custom path to a lib or external application, the path is not saved unless one press Return after havin... Paolo Cavallini
10:55 PM Feature request #9326: Tolerance (snapping) during analyses
See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html Paolo Cavallini
10:50 PM Feature request #9326 (Feedback): Tolerance (snapping) during analyses
In case of layers with essentially the same shapes, with different precision, the diff between these layers produces ... Paolo Cavallini
10:55 PM Feature request #9327: Add warning for topological errors
See a discussion on: http://lists.osgeo.org/pipermail/qgis-developer/2014-January/030119.html Paolo Cavallini
10:53 PM Feature request #9327 (Closed): Add warning for topological errors
In case of layers with topological errors, analyses fail, and the user has no clue about the reasons.
I suggest to c...
Paolo Cavallini
06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104
Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -
06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104
Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -
06:42 PM Bug report #9315 (Reopened): Field Calculator, slow performance with 2.1.0-104
Also noticed that slow performance occurs only when Attribute Table is open (master, Ubuntu). dr -
01:29 PM Bug report #8205 (Closed): Selected rows in attribute table have wrong/too light background color
Fixed in changeset commit:"173e1d72a668fcf26366fc64052ed664fefe059b". Matthias Kuhn
04:58 AM Bug report #8205: Selected rows in attribute table have wrong/too light background color
Sorry - I don't have a dev environment on Windows. If you put it into master I could test it with the next nightly to... Andreas Neumann
04:26 AM Bug report #8205: Selected rows in attribute table have wrong/too light background color
Can a windows user give a try to https://github.com/qgis/QGIS/pull/1069
I was coding it pretty much in the dark
Matthias Kuhn
03:56 AM Bug report #8205 (Reopened): Selected rows in attribute table have wrong/too light background color
Reopened due to demand on mailing list. Matthias Kuhn
03:56 AM Bug report #8205 (Reopened): Selected rows in attribute table have wrong/too light background color
Reopened due to demand on mailing list. Matthias Kuhn
12:40 PM Bug report #9324: Regression: Inference lines in composer no longer appear
Can you clarify this for me -- what exactly do you mean by inference lines? The snap lines?
Nyall Dawson
04:08 AM Bug report #9324 (Closed): Regression: Inference lines in composer no longer appear
In master ( e745b2f ) there seems to be a regression in composer. The inference lines that were shown when moving obj... Tim Sutton
09:45 AM Bug report #9259: SpatiaLite new column issue
done #9325 Maxim Dubinin
09:45 AM Bug report #9325 (Closed): Saving as Spatialite saves as SQLite that allows setting width of the ...
1. Load any shapefile with say 1 polygon
2. Right-click - save as Spatialite, check Add to canvas
3. After it is done...
Maxim Dubinin
06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable
Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc
06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable
Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc
06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable
Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc
06:51 AM Bug report #8499: OWS tab - adding CRS restrictions not reliable
Pull-request waits ffor review https://github.com/qgis/QGIS/pull/1063 René-Luc ReLuc
03:59 AM Bug report #9323: QGIS Processing Options python error on windows8
Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error...
Richard Duivenvoorde
03:59 AM Bug report #9323: QGIS Processing Options python error on windows8
Hi José,
the main issue is that the python code of processing is not handling utf8 correctly (as seen from the error...
Richard Duivenvoorde
03:42 AM Bug report #9323 (Closed): QGIS Processing Options python error on windows8
Hello, im a forestry student from Portugal, that started working now with a company and used ArcGIS and IDRISI as SIG... José Alves
02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor
I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi...
René-Luc ReLuc
02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor
I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi...
René-Luc ReLuc
02:52 AM Bug report #8417 (In Progress): incorrect value loaded from netcdf file with scale factor
I have send a pull-request [RASTER][Feature] Applying scale and offset to raster data - funded by Ifremer
https://gi...
René-Luc ReLuc
02:20 AM Feature request #8682 (Closed): Add expressions to diagrams
Thank you very much, Stéphane Matthias Kuhn

2014-01-12

12:31 AM Feature request #8682: Add expressions to diagrams
This issue can be closed :-) Stéphane Brunner
08:56 PM Bug report #9036: db manager's spatialite node gone in latest qgis master
Alex, please re-open, the osgeo4w pyspatialite package _is_ installed (as stated in description). Mathieu Pellerin - nIRV
08:58 AM Bug report #9157 (Closed): Offline editing tool is very slow when it creates the Spatialite local...
Giovanni Manghi
08:55 AM Bug report #9119 (Closed): srs.db not closed (with OTF reprojection)
Giovanni Manghi
08:53 AM Bug report #8993 (Closed): resizing the map object with "draw coordinates" option active does not...
I cannot replicate it anymore on master, I guess it has been fixed. Giovanni Manghi
08:53 AM Bug report #8993 (Closed): resizing the map object with "draw coordinates" option active does not...
I cannot replicate it anymore on master, I guess it has been fixed. Giovanni Manghi
08:49 AM Bug report #9221 (Closed): Overwriting shapefile removes all attribute data and features
Fixed in changeset commit:"d59ab8052287425b98bf7add107e789737ec4c7c". Jürgen Fischer
05:01 AM Bug report #9254 (Closed): Vector points style: "outline width" = 0 still show the outline
Matthias Kuhn
04:55 AM Bug report #9254: Vector points style: "outline width" = 0 still show the outline
Great work, thanks everybody :) Noone Noone
04:13 AM Bug report #9254 (Resolved): Vector points style: "outline width" = 0 still show the outline
The pull request was merged :-)
https://github.com/qgis/QGIS/pull/1046
Alvaro Huarte

2014-01-11

12:21 AM Bug report #9314 (Closed): Wrong FILTER validation in WMS
Fixed in changeset commit:"d82a3991a9ebf6066c6b455bf0de04f129677baa". Alessandro Pasotti
12:04 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
You have fixed the problem in OSGeo4W. So i assume the solution will also be available in the next standalone QGIS In... Holger Bischoping
12:50 PM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
Holger Bischoping wrote:
> Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
> Thanks a lot
Huh? That's unchanged.
Jürgen Fischer
12:42 PM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
Yes. QGIS-OSGeo4W-2.0.1-3-Setup-x86_64.exe.
Thanks a lot
Holger Bischoping
10:39 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
I suppose the 64bit installer. It's fixed in OSGeo4W now. Jürgen Fischer
10:03 AM Bug report #9322 (Feedback): Qwt5 cannot be imported by plugin on Windows 64bit
Giovanni Manghi
08:14 AM Bug report #9322: Qwt5 cannot be imported by plugin on Windows 64bit
Are you using the 64bit or the 32bit installer on Windows 64bit? Jürgen Fischer
07:42 AM Bug report #9322 (Closed): Qwt5 cannot be imported by plugin on Windows 64bit
h1. Context: QGIS - Standalone - Installer

QGIS-Version 2.0.1-Dufour QGIS-Codeversion d94c044
...
Holger Bischoping
11:11 AM Bug report #9091: Field calculator toolbar item disabled in edit mode
Thanks Salvatore :) Noone Noone
06:26 AM Bug report #9091: Field calculator toolbar item disabled in edit mode
This should happen (in 2.0.1) only for point layer, with line and polygon layer should be working.
I had fixed this i...
Salvatore Larosa
10:32 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows
OSGeo4W 32bit supports ECW (and MrSID). Jürgen Fischer
10:32 AM Bug report #8759 (Closed): ECW support missing in 32bit QGIS on Windows
OSGeo4W 32bit supports ECW (and MrSID). Jürgen Fischer
10:09 AM Bug report #8759 (Feedback): ECW support missing in 32bit QGIS on Windows
Giovanni Manghi
10:06 AM Bug report #8759: ECW support missing in 32bit QGIS on Windows
OSGeo4W 32bit supports ECW now, doesn't ? Salvatore Larosa
09:54 AM Bug report #8644 (Closed): Models with utf-8 description can't be executed
Fixed in commit:e4c60ad Salvatore Larosa
09:54 AM Bug report #8644 (Closed): Models with utf-8 description can't be executed
Fixed in commit:e4c60ad Salvatore Larosa
06:17 AM Bug report #9141 (Closed): processing script editor window does not have close button on linux
Salvatore Larosa
06:13 AM Bug report #9162 (Feedback): Crash when typing something into python editor
I think this is not related to the console code, please could you try the latest master code ?
Also could you provide...
Salvatore Larosa
06:09 AM Bug report #9175 (Closed): [processing] scripts with non ascii character can't be saved
Fixed in changeset commit:"d04239d70b2e2a00137d85ae4d1f46419388fab8". Salvatore Larosa
03:23 AM Bug report #9321 (Closed): Empty RULE parameter in GetLEgendGraphic returns all rules even if a r...
Given this rule fragment:... Alessandro Pasotti

2014-01-10

11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table
tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi
11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table
tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi
11:02 AM Bug report #9320: Weird behavior when creating columns from a joined table
tagging this as a regression at least until I will have time to test if is still an issue on QGIS master. Giovanni Manghi
10:59 AM Bug report #9320 (Closed): Weird behavior when creating columns from a joined table
Steps to reproduce:
1- Join the layer named 'Joined_Table.csv' to the layer named 'BBS_Routes' using the shared rou...
Guillaume Larocque
09:41 AM Bug report #9319 (Closed): copy of QgsExpression causes segfault
The default copy and assigment operator of QgsExpression causes segfault (multiple delete) if used.
Since the copy a...
Vincent Mora
09:32 AM Bug report #9318 (Closed): Paste layer style is allowed on layers with different geometry types a...
QGIS allows user to copy\\paste a style where the origin layer style has different geometry type than the destination... Alexandre Neto
09:03 AM Bug report #8818: "value map" widget broken
Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Giovanni Manghi wrote:
> > > weird, is still broke here, see attach...
Alvaro Huarte
07:52 AM Bug report #8818: "value map" widget broken
Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > weird, is still broke here, see attached screencast.
>
> Hi Giovan...
Giovanni Manghi
01:35 AM Bug report #8818: "value map" widget broken
Giovanni Manghi wrote:
> weird, is still broke here, see attached screencast.
Hi Giovanni, maybe I've missed somethi...
Alvaro Huarte
07:53 AM Feature request #6040: Dissolve should support multiple fields
Andrey Isakov wrote:
> +1 for this feature
meantime the SAGA dissolve in the processing toolbox allows to choose up ...
Giovanni Manghi
02:39 AM Feature request #6040: Dissolve should support multiple fields
+1 for this feature Andrey Isakov
07:45 AM Bug report #9317 (Closed): OTB Band Math error with Processing (sextante) modeler
OTB Band Math used with the Processing modeler doesn't work. According to the log file (see below), it seems that the... ken oz
06:19 AM Bug report #8298 (In Progress): CRS change with recently used CRS makes no effect in the first ch...
René-Luc ReLuc
01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http...
René-Luc ReLuc
01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http...
René-Luc ReLuc
01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http...
René-Luc ReLuc
01:43 AM Bug report #8298: CRS change with recently used CRS makes no effect in the first choice
If the developer, doesn't selector a default CRS, the projection
selector selects the last recent selected CRS.
http...
René-Luc ReLuc
03:53 AM Bug report #9316 (Open): Topology errors detected by some checker, not from others
The attached shp has a number of topological errors. The fTools checker (under manu Vector>Gemoetry tools) detects 34... Paolo Cavallini
02:44 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
Matthias Kuhn wrote:
> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a d...
Andrey Isakov

2014-01-09

11:57 PM Feature request #9287: Live linked layer styles
This would be a great feature!
I would add a possibility to link feature styles to styles in style manager.
Styles c...
Lauri Kajan
10:29 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
I've noticed a similar latency recently, but in a release build (i.e. without debug output, so Jürgens commits should... Matthias Kuhn
03:52 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104
Fixed in changeset commit:"ccde424dc14ebc82c97e62d3568b1cf15f3bfda9". Jürgen Fischer
02:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
This only occurs when Attribute Table is open. joe larson
02:47 PM Bug report #9315: Field Calculator, slow performance with 2.1.0-104
This only occurs when Attribute Table is open. joe larson
02:20 PM Bug report #9315 (Closed): Field Calculator, slow performance with 2.1.0-104
using OSGeo4W64, 2.1.0-104 while trying to update a field in a large dataset (~300MB) with the Field Calculator ...ve... joe larson
10:07 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master

> * Just to be sure: What is the result expected to be? Should NULL values be grouped? From a database perspective ...
Giovanni Manghi
08:56 AM Bug report #9307 (Feedback): QGIS 2.0 won't open on OSX 10.9
Giovanni Manghi
08:10 AM Bug report #9314: Wrong FILTER validation in WMS
Fixed in https://github.com/qgis/QGIS/pull/1062 Alessandro Pasotti
08:08 AM Bug report #9314 (Closed): Wrong FILTER validation in WMS
When filter contains strings with more than two words, it gets grouped but the individual elements in the token list ... Alessandro Pasotti
05:45 AM Feature request #9303: Add a switch to reverse colours and invert palette
Not sure it is necessary. I'd put it besides the "invert colour" checkbox. Paolo Cavallini
05:17 AM Feature request #9303: Add a switch to reverse colours and invert palette
Added a few people to this ticket, would appreciate feddback on questions raised in last comment. Etienne Tourigny
05:14 AM Feature request #9303: Add a switch to reverse colours and invert palette
Actually, implementing "invert palette" shouldn't be too hard.
The question is, where should this option appear? In...
Etienne Tourigny
05:01 AM Feature request #9303: Add a switch to reverse colours and invert palette
Added invert checkbox for vector layer classification (Categorized and Graduated) in 0a8c1ccd090f28efe2706e6f56d8ce28... Etienne Tourigny
05:36 AM Bug report #9312: Manually adjusting "Value" in a "Graduated" class doesn't update the "Label" co...
Additional condition: The label column should only be adjusted, when it is still unmodified. Matthias Kuhn
05:35 AM Bug report #9290: Join problems if filename contains dot
Confirmed here.
I have fixed an issue which masked the real issue and led to a memory leak in the categorized render...
Matthias Kuhn

2014-01-08

12:10 AM Bug report #8727 (Closed): GetProjectSettings returns field name instead of alias for display field
Fixed in changeset commit:"1f9c378c77160f64612391e4e40824b853d59ddd". Alessandro Pasotti
09:20 AM Bug report #9312 (Closed): Manually adjusting "Value" in a "Graduated" class doesn't update the "...
When I classify an integer or float field using graduated values and manually adjust the values, the label column doe... Donovan Cameron
08:51 AM Bug report #9311 (Closed): Creating a group layer reverses order of selected layers in new group
When selecting more than one layer in the layer list and creating a group from them, the order of the layers is rever... Donovan Cameron
07:32 AM Bug report #9307: QGIS 2.0 won't open on OSX 10.9
Hi Jon
Go to http://www.kyngchaos.com/software/qgis , download the "requirements" and install.
When you install Mav...
Rhenriques Henriques
03:33 AM Feature request #9094 (Closed): Del-key should delete feature
Alvaro Huarte
03:02 AM Bug report #9310 (Closed): Save dialogue for Geoprocessing outputs is inconsistent
The dialogue for saving a vector output using Windows 7 (64 and 32bit) is a different dialogue box from the save vect... Neil Benny
02:27 AM Bug report #2487: Memory data provider should not be saved
regis Haubourg wrote:
> It is easy to delete layers not needed, so I vote to keep persistent memory layers. But if on...
Radim Blazek
01:17 AM Bug report #2487: Memory data provider should not be saved
+1 with Chris, Memory Layer Saver plugin is installed in default config here and IMHO should be ported to core.
It is...
Regis Haubourg

2014-01-07

11:38 PM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
Can confirm.
Some comments:
* Just to be sure: What is the result expected to be? Should NULL values be grouped? F...
Matthias Kuhn
11:31 PM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
Salvatore Larosa wrote:
> but I am still getting a QPyNullVariant error here.
confirmed...
Giovanni Manghi
04:36 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
This seems to happen when the layer has @NULL@ attribute values, I had proposed a "patch":https://github.com/qgis/QGI... Salvatore Larosa
04:36 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
This seems to happen when the layer has @NULL@ attribute values, I had proposed a "patch":https://github.com/qgis/QGI... Salvatore Larosa
11:02 PM Feature request #9176: add layerid in record category for expressions
is this even possible? Denis Rouzaud
09:06 PM Bug report #9308 (Closed): Impossible to remove a group
fixed in commit:2155dd8c3df3e7d505ca18b9ffac9cca006ba114 Jürgen Fischer
03:14 PM Bug report #9308 (Resolved): Impossible to remove a group
Alvaro Huarte
03:13 PM Bug report #9308: Impossible to remove a group
The pull request (https://github.com/qgis/QGIS/pull/1060) fix this bug
Thanks
Alvaro
Alvaro Huarte
03:13 PM Bug report #9308: Impossible to remove a group
The pull request (https://github.com/qgis/QGIS/pull/1060) fix this bug
Thanks
Alvaro
Alvaro Huarte
01:54 PM Bug report #9308: Impossible to remove a group
I will fix it, it is a bug generated by me in PR-1010 (https://github.com/qgis/QGIS/pull/1010)
Best Regards
Alvaro Huarte
08:59 AM Bug report #9308 (Closed): Impossible to remove a group
In current master, when trying to remove a group in the legend - I get the message "no layer is selected" - to remove... Andreas Neumann
11:18 AM Bug report #2487: Memory data provider should not be saved
Interesting point .. I'm not convinced about the last case (don't write layer to project). My feeling is that the if... Chris Crook
10:46 AM Bug report #2487: Memory data provider should not be saved
There are cases when saving memory layers (without data) in project is useful, for example if layer symbology has to ... Radim Blazek
10:46 AM Bug report #2487: Memory data provider should not be saved
There are cases when saving memory layers (without data) in project is useful, for example if layer symbology has to ... Radim Blazek
10:46 AM Bug report #2487: Memory data provider should not be saved
There are cases when saving memory layers (without data) in project is useful, for example if layer symbology has to ... Radim Blazek
11:17 AM Bug report #9309 (Closed): Memory provider crash on features without geometry
Fixed in changeset commit:"2daca28939d209b085f5c2ef6fc5f0324eaa371c". Radim Blazek
11:14 AM Bug report #9309 (Closed): Memory provider crash on features without geometry
Memory provider crashes on features without geometry in QgsMemoryFeatureIterator. Radim Blazek
09:13 AM Bug report #8881: QGIS server fails to display capabilities when there are 2 layers of the same p...
Tested today on master: I cannot reproduce. Alessandro Pasotti
08:08 AM Bug report #9307 (Closed): QGIS 2.0 won't open on OSX 10.9
I just installed QGIS 2.0 on my macbook running OSX Mavericks (was successfully running QGIS 1.5 on there previously)... Jon Barth
07:54 AM Bug report #8727: GetProjectSettings returns field name instead of alias for display field
Hi Marco and Bernhard,
please see my PR:
https://github.com/elpaso/QGIS/commit/1f9c378c77160f64612391e4e40824b853d5...
Alessandro Pasotti
05:54 AM Bug report #9306 (Closed): mapserver GetMap segfaults when OPACITIES is set and an external SLD a...
Fixed in changeset commit:"821518337188d55ee31e4fcb42d4ac8e92b5f9ce". Jürgen Fischer
05:03 AM Bug report #9306 (Closed): mapserver GetMap segfaults when OPACITIES is set and an external SLD a...
Here is a patch, I'll provide it in a PR.
For the impatients:...
Alessandro Pasotti
05:10 AM Bug report #9259: SpatiaLite new column issue
Yes, this should be considered a separate issue: The layer OGR provider is used instead of the built-in spatialite pr... Matthias Kuhn
05:05 AM Feature request #9303: Add a switch to reverse colours and invert palette
It is possible to invert the gradient in rasters (before classifying), but not in vectors. It should be easy to add a... Etienne Tourigny
01:22 AM Feature request #9303 (Closed): Add a switch to reverse colours and invert palette
See http://www.bc-consult.com/free/bcccoltbl1.html#i001 Paolo Cavallini
04:09 AM Bug report #9268 (Closed): Attribute table not updating automatically
Fixed in changeset commit:"5c38775be47e683798b587f0382ca9cd81442565". Matthias Kuhn
03:21 AM Bug report #9282 (Feedback): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> I think it's still important that QGIS warn users that it can't handle layers with GEOMETRY types, because it was ...
Giovanni Manghi
03:21 AM Bug report #9282 (Feedback): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> I think it's still important that QGIS warn users that it can't handle layers with GEOMETRY types, because it was ...
Giovanni Manghi
03:21 AM Bug report #9282 (Feedback): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> I think it's still important that QGIS warn users that it can't handle layers with GEOMETRY types, because it was ...
Giovanni Manghi
03:21 AM Bug report #9282 (Feedback): Rule-based styling on SpatiaLite layer won't take, occasionally crashes

> I think it's still important that QGIS warn users that it can't handle layers with GEOMETRY types, because it was ...
Giovanni Manghi
03:00 AM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
Thanks Bo. That is a very creative solution!
Every layer I'm trying to work with in QGIS contains only points or onl...
Simon O'Keefe
01:28 AM Feature request #9305 (Feedback): Filter colour ramps
Add a filter for colour ramps (by name, tag, metadata, etc) for easier discovery and selection.
Need to implement br...
Paolo Cavallini
01:25 AM Bug report #9304 (Closed): Names of colour ramp categories
ColorBrewer and cpt-city are meaningless to the average user: better give more standard and descriptive names Paolo Cavallini
01:20 AM Feature request #9302 (Open): Add equal area and other classifications for raster colour ramps
See http://www.bc-consult.com/free/bcccoltbl1.html Paolo Cavallini
01:19 AM Bug report #7822 (Feedback): Export to Spatialite is really slow, compared to commandline ogr2ogr
Works like a charm in latest master (021441b361). Export of the attached file took about several seconds. Tested unde... Alexander Bruy
01:00 AM Bug report #7822 (Reopened): Export to Spatialite is really slow, compared to commandline ogr2ogr
The bug resurfaced and export in the latest nighly build is very slow. Reported both on Windows 7 and Ubuntu. Maxim Dubinin

2014-01-06

12:53 AM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
Simon, AFAIK QGIS generally doesn't support the "Geometry" (non specific geometry) type, so your OGR2OGR command has ... Bo Victor Thomsen
02:29 PM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
Thanks Nathan. I've tested it with two versions/distributions (GDAL 1.10.1, and release-1600-gdal-1-9-mapserver-6-2),... Simon O'Keefe
12:47 AM Bug report #9259: SpatiaLite new column issue
Let me add my 5c to the confusion.
Try to do this:
1. Load any shapefile with say 1 polygon
2. Right-click - save as...
Maxim Dubinin
11:30 PM Bug report #9259: SpatiaLite new column issue
As far as I know, the values in the combobox are used equally throughout QGIS and the label below is used to tell the... Matthias Kuhn
07:50 PM Feature request #9288: add $map, $composer variables to expression builder
Attaching a screenshot that showcases a very basic use of the $map variable to highlight a specific polygon via a col... Mathieu Pellerin - nIRV
10:46 AM Bug report #9301 (Closed): Impossible to open *.xls file from folder containing cyrillic
It is possible to open MS Excel (*.xls) file as vector layer in QGIS. But if create folder with name containing cyril... dr -
08:02 AM Feature request #9299 (Closed): Print composer map edge to act as an obstacle for vector labels
Alexander Bruy wrote:
> Maybe I don't understand correctly, but seems this is already implemented. You need to open "...
marisn -
06:54 AM Feature request #9299: Print composer map edge to act as an obstacle for vector labels
Maybe I don't understand correctly, but seems this is already implemented. You need to open "Automated Placement Engi... Alexander Bruy
06:21 AM Feature request #9299 (Closed): Print composer map edge to act as an obstacle for vector labels
Currently map edge in the print composer is not an obstacle for vector feature labels, thus labels of objects located... marisn -
07:16 AM Feature request #8388: Georeferencer - allow to disable automatic reducing
Still valid :) Jean-Roc Morreale
06:40 AM Bug report #9300 (Closed): NameError: global name 'exceptions' is not defined
An error has occured while executing Python code:
Traceback (most recent call last):
File "/usr/share/qgis/python/...
Weigang Wei
03:49 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
I have made a patch for the multipart split plugin. Please confirm that it's working, and report in #9291.
I have al...
Alexandre Neto
01:55 AM Bug report #9298 (Closed): QGIS icon
What happened with the QGIS icon in v2.x?
See attached screenshot : Windows 7 taskbar with normal and small icon
...
Rémi Bovard

2014-01-05

12:59 AM Bug report #9297 (Closed): ftools: warn users in clear, meaningful, visible way when geometries h...
With the attached layers the difference operation (ftools) returns wrong results.
Compare with the difference you ca...
Giovanni Manghi
12:17 AM Bug report #9295 (Closed): GetPrint causes segfault if HTML formatted text is used in the template
This bug was discussed at least in
http://lists.osgeo.org/pipermail/qgis-developer/2013-May/026269.html
but I coul...
Alessandro Pasotti
08:18 PM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
I wonder what version of spatialite ogr, or what it is doing, because the QGIS browser doesn't seem to like the file. Nathan Woodrow
08:10 PM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
So I've identified that the issue does not affect straight SQLite files, but it seems serious that this bug still cra... Simon O'Keefe
09:40 AM Bug report #9289 (Closed): WMS cache never used
Unless you bookmark your current canvas and use a fixed window size it's not very likely to hit the exact same window... Jürgen Fischer
09:40 AM Bug report #9289 (Closed): WMS cache never used
Unless you bookmark your current canvas and use a fixed window size it's not very likely to hit the exact same window... Jürgen Fischer
09:23 AM Bug report #9294: 'support' doesn't necessarily mean commercial support
Thank you very much @Jürgen :) Noone Noone
09:19 AM Bug report #9294 (Closed): 'support' doesn't necessarily mean commercial support
Fixed in changeset commit:"e103420b47748aef7563aa96b1a06b816e03321a". Jürgen Fischer
06:48 AM Bug report #9294 (Closed): 'support' doesn't necessarily mean commercial support
Hi, QGIS 2.0 links at menu Help -> Need support? to link to that page that list commercial companies offering support... Noone Noone
06:26 AM Feature request #9279: Preselect field in Label dialogue
@Matthias I don't know about this widgets, but why not, if they are in use already :)
Another idea would be to skip...
Noone Noone
02:20 AM Feature request #9279: Preselect field in Label dialogue
@noone noone are you aware of the ux mailinglist we created recently?
I added it to your usability wiki page:
https...
Richard Duivenvoorde
01:45 AM Feature request #9279: Preselect field in Label dialogue
How about the QgsVectorLayer.displayField() or QgsVectorLayer.displayExpression() as default? Matthias Kuhn
06:23 AM Feature request #9255: Toolbar for map workspace
I'm sorry but I lack the skills and time to start learning compiling QGIS :(
Do you like to share screenshots or a s...
Noone Noone
05:55 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
Ok, done for:
traceDigitize: https://sourceforge.net/apps/trac/geoing/ticket/3
and
rectangles oval digitizing: #9293
Richard Duivenvoorde
04:30 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
Agreed, very important to open specific tickets for individual plugins. Please do it; ask for help if needed. Paolo Cavallini
02:28 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
When disabling signals get disconnected, and not necessarily get reconnected when re-enabling. E.g. the Multipart Spl... Matthias Kuhn
03:42 AM Feature request #9292: Custom Format for Grid Coordinates
Would also solve Feature #7804... Klas Karlsson
03:37 AM Feature request #9292 (Closed): Custom Format for Grid Coordinates
Would it be possible to get a "custom" format for "Draw Coordinates" in the Composer.
(picture 1)
When selecting "c...
Klas Karlsson
02:55 AM Bug report #9268: Attribute table not updating automatically
I am a bit puzzled about this issue.
It would be an easy fix (remove the blockSignals calls on lines 192 and 194 in ...
Matthias Kuhn

2014-01-04

12:27 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
Matthias Kuhn wrote:
> These are bugs in the plugins and need to be fixed in each one individually.
>
> It seems tha...
Giedrius Vaivilavičius
05:38 PM Bug report #9229 (Closed): Layer editing saving for a long time (memory leak?)
These are bugs in the plugins and need to be fixed in each one individually.
It seems that these plugins (verified o...
Matthias Kuhn
05:38 PM Bug report #9229 (Closed): Layer editing saving for a long time (memory leak?)
These are bugs in the plugins and need to be fixed in each one individually.
It seems that these plugins (verified o...
Matthias Kuhn
12:06 PM Bug report #9229: Layer editing saving for a long time (memory leak?)
Richard Duivenvoorde wrote:
> --noplugins fixed it, but I did not have the Multipart Split plugin
>
> so hitting ctr...
Salvatore Larosa
12:04 PM Bug report #9229: Layer editing saving for a long time (memory leak?)
Salvatore Larosa wrote:
> Confirmed here although executing QGIS with --noplugins does disappear the issue (same OS)....
Giedrius Vaivilavičius
11:41 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
--noplugins fixed it, but I did not have the Multipart Split plugin
so hitting ctrl-c (in terminal) when 'hanging' d...
Richard Duivenvoorde
10:36 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
For me it was enough to disable the Multipart Split plugin! Salvatore Larosa
10:30 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
Confirmed here although executing QGIS with --noplugins does disappear the issue (same OS).
Please test with --noplu...
Salvatore Larosa
09:17 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
Matthias Kuhn wrote:
> About 45 edit sessions resulting in a total of 93 points starting from the attached shapefile ...
Giedrius Vaivilavičius
09:15 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
also reproduced on a master build here (31 dec).
Again the crash output, but I took some more info from the debug ou...
Richard Duivenvoorde
09:03 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
I can reproduce this here on a self compiled 2.0 branch build on Debian.
Took me some clicks and edits, but at a cer...
Richard Duivenvoorde
08:01 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
About 45 edit sessions resulting in a total of 93 points starting from the attached shapefile (mem_leak) don't change... Matthias Kuhn
10:12 PM Feature request #9288: add $map, $composer variables to expression builder
(Summing up the discussion over IRC)
Case scenario #1:
- User wants to output a large A2 poster with 4 map items sho...
Mathieu Pellerin - nIRV
06:30 PM Feature request #9288: add $map, $composer variables to expression builder
I still don't see the use case for this. The value will change. If you have 3 map windows what is the expected outcome? Nathan Woodrow
06:27 PM Feature request #9288: add $map, $composer variables to expression builder
Needs to be re-opened. This is only partly implemented. Nyall Dawson
06:26 PM Feature request #9288 (Closed): add $map, $composer variables to expression builder
Fixed in changeset commit:"c45bf504e761e568e1bc100eda0edc3e00213907". Nyall Dawson
03:33 AM Feature request #9288: add $map, $composer variables to expression builder
Sure I understand what it returns what I don't see is the use case. Can you explain it a bit more. Maybe with a exam... Nathan Woodrow
03:11 AM Feature request #9288: add $map, $composer variables to expression builder
$map returns the composer's map item name (i.e. 'map 0','map 1') when drawing onto a composer map item, or 'canvas' w... Mathieu Pellerin - nIRV
03:08 AM Feature request #9288: add $map, $composer variables to expression builder
What use is the $map variable? Nathan Woodrow
02:46 AM Feature request #9288 (Closed): add $map, $composer variables to expression builder
Looking at the atlas expression variable, I realized a $map and $composer variables would be really useful.
The $map...
Mathieu Pellerin - nIRV
06:23 AM Bug report #9286 (Closed): canvas decorations: y Offset of grid not saved correctly in .qgs proje...
Fixed in changeset commit:"9a5882890637d00ccf1dcc85fbce4b8fb3e81a7e". Salvatore Larosa
05:14 AM Bug report #9286 (Open): canvas decorations: y Offset of grid not saved correctly in .qgs project...
Giovanni Manghi
05:08 AM Bug report #9286: canvas decorations: y Offset of grid not saved correctly in .qgs project file
In the dialog which can be accessed from the menu bar by View > Decorations > Grid. Raimund Schnuerer
05:46 AM Bug report #9290 (Closed): Join problems if filename contains dot
If a shapefile being joined has more then one dot in its name (e. g. oo.pp.shp) and it is joined to another SHP file ... jaanvajakas -
05:13 AM Bug report #9259 (Reopened): SpatiaLite new column issue
Ok, SQLite does not support width and precision. But now "New column" window looks ugly. What is the purpose of strin... dr -
05:13 AM Bug report #9259 (Reopened): SpatiaLite new column issue
Ok, SQLite does not support width and precision. But now "New column" window looks ugly. What is the purpose of strin... dr -
04:55 AM Bug report #9259 (Closed): SpatiaLite new column issue
Closing for the reasons outlined by Jukka. Matthias Kuhn
04:52 AM Bug report #9289 (Closed): WMS cache never used
QGIS writes data to the .qgis2/cache/data7/ folder, but seems to never use it: panning the map a little back and fort... jaanvajakas -
02:32 AM Bug report #9285: qgis-2.0.1/src/gui/qgscomposerview.cpp: 2* bad if test ?
Good catch -- thanks! Nyall Dawson
02:31 AM Bug report #9285 (Closed): qgis-2.0.1/src/gui/qgscomposerview.cpp: 2* bad if test ?
Fixed in changeset commit:"bee12917270c5d286ff0915c727381eb08e9e017". Nyall Dawson

2014-01-03

11:10 PM Feature request #9287 (Open): Live linked layer styles
A nice feature to have would be to be able to load a .qml file but have it re-read from the file when it is changed. ... Nathan Woodrow
12:02 PM Bug report #9280 (Closed): "Add postgis layer" creates a connection that is not removed until qgi...
Fixed in changeset commit:"1215d0b016367f6f7ce6e938b326a26227766a97". Jürgen Fischer
01:02 AM Bug report #9280: "Add postgis layer" creates a connection that is not removed until qgis is term...
I propose this pull request:
https://github.com/qgis/QGIS/pull/1051
Alvaro Huarte
01:02 AM Bug report #9280: "Add postgis layer" creates a connection that is not removed until qgis is term...
I propose this pull request:
https://github.com/qgis/QGIS/pull/1051
Alvaro Huarte
09:42 AM Bug report #9286 (Feedback): canvas decorations: y Offset of grid not saved correctly in .qgs pro...
in the print composer? Giovanni Manghi
07:57 AM Bug report #9286 (Closed): canvas decorations: y Offset of grid not saved correctly in .qgs proje...
When enabling the grid and setting "Offset Y", it is saved as xOffset in the .qgs project file.
Thus when reloading ...
Raimund Schnuerer
05:08 AM Bug report #9285 (Closed): qgis-2.0.1/src/gui/qgscomposerview.cpp: 2* bad if test ?
I just ran the static analyser "cppcheck" over the
source code of qgis-2.0.1
It said many things, including
1.
q...
David Binderman

2014-01-02

12:27 AM Bug report #9271: Tune stylemanager spinbutton
Thank you very much :) Noone Noone
06:11 PM Bug report #9271 (Closed): Tune stylemanager spinbutton
Fixed in changeset commit:"bf80c007f24552a161ec3bdc7237570b1bbfc69f". Anonymous
12:26 AM Feature request #9272: Label style useful defaults
On Ubuntu I do have it, but anyway every more decent font (non rounded character shapes, non serif, ...) would be ok. Noone Noone
04:48 PM Feature request #9272: Label style useful defaults
I don't think you have Arial on Linux installs. On windows you do. Nathan Woodrow
08:16 PM Feature request #9255: Toolbar for map workspace
Do you have the ability to build your own copy of QGIS. I have some code that implements a sub main window and moves... Nathan Woodrow
04:42 PM Bug report #9273 (Closed): Move fullscreen shortcut
Nathan Woodrow

2014-01-01

12:47 AM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
Aha.
If I recreate the layer as a plain SQLite file (not SpatiaLite), then QGIS displays it correctly, maintains the...
Simon O'Keefe
12:36 AM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
I translated the VMLITE_TR_ROAD MapInfo table (supplied in the zip file) to SpatiaLite using ogr2ogr:... Simon O'Keefe
10:22 PM Bug report #9282: Rule-based styling on SpatiaLite layer won't take, occasionally crashes
How did you create that SpatiaLite file? Nathan Woodrow
10:12 PM Bug report #9282 (Closed): Rule-based styling on SpatiaLite layer won't take, occasionally crashes
When attempting to set up rule-based styling on a layer from a SpatiaLite file, I can successfully configure and test... Simon O'Keefe
12:08 AM Bug report #9273: Move fullscreen shortcut
:-) Alvaro Huarte
12:05 AM Bug report #9283 (Closed): Composer PDF export produces blank output if output file in use
If you use the PDF export feature from Composer it will not give an error if unable to create the PDF
e.g. the file ...
Patrick Dunford
05:55 PM Bug report #6369 (Reopened): vsizip - relative paths not used & can't update path in "missing lay...
I applied this patch to QGIS 2.0.1 and still unable to update vsizip paths. I can navigate to the zip file, highlight... Donovan Cameron
01:56 PM Feature request #9281 (Closed): [composer] add option to disable antialiasing when exporting comp...
To be more precise, it seems that when printing the option is set always as active, no matter if printing as raster o... Giovanni Manghi
01:32 PM Bug report #9213: 'bad_alloc' error at QGIS start
I have found that if I run QGIS from command line this problem occurs less frequently than when running from applicat... Ivan Mincik
01:19 PM Bug report #9280 (Closed): "Add postgis layer" creates a connection that is not removed until qgi...
This is observed by monitoring the pgadmin III server status window while adding and removing postgis layers.
When a...
Matt Veenstra
05:34 AM Feature request #9277: Make labels follow layer z-order
noone noone wrote:
> I'm ok to keep is a (optional) feature, but please be aware that this is completely unexpected b...
Giovanni Manghi
05:25 AM Feature request #9277: Make labels follow layer z-order
I'm ok to keep is a (optional) feature, but please be aware that this is completely unexpected behavior, as the user ... Noone Noone
05:20 AM Feature request #9277 (Closed): Make labels follow layer z-order
Hi,
this is not a bug but rather a feature. I guess that the main purpose is to allow show labels of features withou...
Giovanni Manghi
05:20 AM Feature request #9277 (Closed): Make labels follow layer z-order
Hi,
this is not a bug but rather a feature. I guess that the main purpose is to allow show labels of features withou...
Giovanni Manghi
04:37 AM Feature request #9277 (Open): Make labels follow layer z-order
Hi, I guess I found a small bug in label rendering:
Usually a layer is hidden, if add a raster layer on top, so it...
Noone Noone
04:55 AM Feature request #9279 (Open): Preselect field in Label dialogue
If you enable the "Label this layer with ... " checkbox at the label dialog within the layer options, currently there... Noone Noone
04:50 AM Feature request #9278: Style size widget isn't separator agnostic , .
The separator is based on the users locale. The , is a thousands separator for me and just typing 0.5 works fine. 5.... Nathan Woodrow
04:42 AM Feature request #9278 (Closed): Style size widget isn't separator agnostic , .
I noticed a small issue with the spin buttons e.g. in the style dialog when you try to adjust the size of a outline e... Noone Noone

2013-12-31

10:15 PM Feature request #7846: print composer should offer a way to change paper background color
As you wish, master: http://www.flickr.com/photos/60284107@N00/11681101764/in/pool-qgis ;)
It's beautifully implemen...
Mathieu Pellerin - nIRV
06:05 PM Feature request #7846: print composer should offer a way to change paper background color
Try it with a gradient or semitransparent fill... Or, for bonus marks, using a data defined expression on an atlas pr... Nyall Dawson
05:45 PM Feature request #7846: print composer should offer a way to change paper background color
Wa-hou this is fantastic, bye bye paper-white constraint. Mathieu Pellerin - nIRV
04:11 AM Feature request #7846 (Closed): print composer should offer a way to change paper background color
Implemented in master. Nyall Dawson
04:11 AM Feature request #7846 (Closed): print composer should offer a way to change paper background color
Implemented in master. Nyall Dawson
09:45 AM Feature request #9275: Choose custom grid shift binary when re-projecting/transforming a dataset.
Thanks for those tips.
Going to consider them all.
Donovan Cameron

2013-12-30

12:28 AM Bug report #9273: Move fullscreen shortcut
Muchas gracias Alvaro! :) Noone Noone
12:08 AM Feature request #9275 (Feedback): Choose custom grid shift binary when re-projecting/transforming...
You have many options here:
*) create custom CRSs that include the parameter to specify the ntv2 grid
*) help us mi...
Giovanni Manghi
 

Also available in: Atom