Activity
From 2015-08-23 to 2015-09-21
2015-09-21
-
10:20 PM Bug report #13355 (Closed): Fill ring crashes QGIS
- Seems to have been resolved in the latest master.
-
06:32 PM Bug report #12987: Values not updating properly when editing attribute table
- Unable to reproduce it on Ubuntu 14.04 with current master commit:ce6264065de
-
- I'm wondering if the layer you load in QGIS is a view.
-
- Fixed in changeset commit:"ce6264065de0ee4a01f305b411251d65ae54f97f".
-
- Even reproducible using "New column", just changing any attribute value of the new column before deleting it.
-
- Even reproducible using "New column", just changing any attribute value of the new column before deleting it.
-
- Even reproducible using "New column", just changing any attribute value of the new column before deleting it.
-
- Even reproducible using "New column", just changing any attribute value of the new column before deleting it.
-
01:16 PM Bug report #13366: Crash when adding new field, changing its value and deleting the same field wi...
- I can confirm the crash (Debian wheezy) and I am getting a similar crash when deleting a virtual field.
I am attachin... -
03:59 PM Feature request #13392 (Open): label engine to support shrink to fit label in polygon?
- actual QGIS labelling do not support shrink font size to fit label in polygon, this feature is important to avoid col...
-
- Fixed in changeset commit:"99211262f35f7c293d00bcd80a315f1917bad0b0".
-
- Fixed in changeset commit:"6a6e366c04d720a99cc4564d6cd986b08a99722d".
-
-
- Wrong, the text is different between export to file (i.e. "Drop existing one") and to a different database (i.e. "Rep...
-
- Somehow duplicated of #12961. The text was replaced with proposed "Replace existing table" one.
BTW if we are export... -
- Somehow duplicated of #12961. The text was replaced with proposed "Replace existing table" one.
BTW if we are export... -
- Somehow duplicated of #12961. The text was replaced with proposed "Replace existing table" one.
BTW if we are export... -
- Maybe we could change it to an editable combobox, populating it with the source table columns.
This way:
1. user is ... -
- It was fixed few hours after the weekly 35 was released (commit:71afc9adc7d).
Just use any next version. -
- It was fixed few hours after the weekly 35 was released (commit:71afc9adc7d).
Just use any next version. -
- It was fixed few hours after the weekly 35 was released (commit:71afc9adc7d).
Just use any next version. -
09:30 AM Bug report #13391 (Closed): GeoJSON not displayed correctly
- All features in the attached GeoJSON file (generated with fiona) are squares but when loading into QGIS 2.8.1, some o...
-
09:12 AM Feature request #13390 (Open): Warn when the output filename expression returns a NULL value or i...
- Create an atlas and in output filename expression, put a wrong formula, something like *'output'||@atlasfeaturenum*
T... -
- I had issued a PR here "[0]":https://github.com/qgis/QGIS/pull/2325 and Jurgen has pushed a more complete fix in comm...
-
- I had issued a PR here "[0]":https://github.com/qgis/QGIS/pull/2325 and Jurgen has pushed a more complete fix in comm...
-
07:02 AM Bug report #13381: dxf file minidump
- Cannot reproduce with commit:22313dc, fixed ?
Salvatore can you try that ? -
- Can be reproduced under linux with current master.
Point 2 is "Layers -> Embed layers and groups"
Stacktrace:... -
- Configure an atlas generation.
Activate the "preview atlas" to preview features. And choose one in the list (other t... -
- Digging further, it appears that i didn't click on "Apply configuration" once I've set up the atlas. So not a bug (ex...
-
- Unchecking the "generate an atlas" box in Atlas generation tab erases all the options set in the "Configuration" fram...
-
07:35 AM Bug report #11211: Save QGIS project on VPN connection is very slow
- I and several others can confirm this problem:
http://osgeo-org.1560.x6.nabble.com/Saving-qgs-project-file-takes-fore... -
07:24 AM Bug report #13167: ftools dissolve, intersection, clip broken
- I checked with _Dissolve_ in Processing in current master on Ubuntu;
result: in OGR-log there is an entry @Feature ge... -
05:17 AM Feature request #13387: Print composer grid coordinate formater should provide variables for curr...
- > for "custom" label formatter to provide variables with (Boeing pilot version):
current D, M, S values (thus allowin... -
04:02 AM Feature request #13387 (Open): Print composer grid coordinate formater should provide variables f...
- This is a reopening of #12472 as current implementation, as provided by fixing #9292, is far from being usable and I,...
-
- Andreas Neumann wrote:
> Actually I think it is already possible to do what you want - on a feature you can have opaq... -
02:23 AM Feature request #12684: QGIS should backup settings before save
- marisn - wrote:
> Analysis of this issue is based on file observations not on code analysis.
We don't write the sett... -
02:12 AM Feature request #13386 (Closed): ogr2ogr based tool to "dissolve polylines"
- Starting from ogr2ogr based tool "Dissolve polygons", it could be useful to have a tool that can dissolve a linear ve...
2015-09-20
-
- I managed to track down the mechanism behind the loss of QGIS settings. The root cause is insecure writing of configu...
-
- Regis Haubourg wrote:
> Hi, that's strange, here ini files are saved at every change. On what platform are you workin... -
01:29 AM Bug report #13101: SAGA Processing-Tool (merge layers) doesn't work and no alternative
- After the last processing update (vers. 2.10.2) the problem is still existing.
-
10:55 PM Bug report #13174 (Closed): Regression: Modeler issue with temp outputs under Windows
- Fixed in changeset commit:"72af56d8a2f7088b9501efc60fd76df89e5acbb5".
-
04:19 PM Bug report #13385 (Closed): QGIS 2.10 Processing Qt Python Error
- Hi -
This isn't an issue with Processing not working or a folder not being correctly identified. Whenever I click: ... -
- Hi, i began working on this issue (see "PR2327":https://github.com/qgis/QGIS/pull/2327)
- I choose to use *field* ins... -
12:58 PM Bug report #13382: Processing installing is failed with non-ascii characters on windows
- The update of processing Fails with the error in the screenschot. Other plugins can be installed without Problems.
-
07:11 AM Bug report #13382: Processing installing is failed with non-ascii characters on windows
- Is this really Processing-specific? Seems like the plugin installer would fail for any plugin.
-
- Is this really Processing-specific? Seems like the plugin installer would fail for any plugin.
-
- The installing of processing 2.10.2 is failling on Windows when the home directory contains non-ascii characters.
-
- Open DB Manager and try to export to vector file one of the tables of the database;
In the opening dialog, there's an... -
11:57 AM Bug report #13383 (Closed): Composer: Attribute table draws some attributes without content
- In Map Composer I try make 11 sides long report width attribute table, where I has modified one attribute through fun...
-
08:45 AM Bug report #13226 (Feedback): Processing fails to load with non-UTF8 character in local date
- Does this still happen after commit:9fc1b48b?
-
- Fixed in commit:9fc1b48b
-
- Fixed in commit:9fc1b48b
-
- Fixed in commit:9fc1b48b
-
-
- Would you mind changing this back to "open"? Thanks.
2015-09-19
-
02:22 PM Bug report #13381 (Closed): dxf file minidump
- software/hardware:
QGIS 2.10 standalone 64 bit, Windows 10 64 bit / Lenovo Z50 75 FX amd - 8 GB RAM
problem: dxf fil...
2015-09-18
-
10:34 PM Bug report #13380 (Closed): reprojection of lat/long lines across 180 in mercator map fails
- Lines that cross the 180 meridian are wrapped the long way around the world ONLY when the 180 meridian is outside the...
-
- >Please note that the situation in QGIS 2.10 and master is actually more confusing than it was up to 2.8.x and person...
-
04:53 AM Feature request #11491: When using data defined colors the map legend shows always a black symbol
- Please note that the situation in QGIS 2.10 and master is actually more confusing than it was up to 2.8.x and persona...
-
- Implemented a few versions ago
-
- Implemented a few versions ago
-
- Hi,
It'd be nice if, as it can be done in the layer properties, user can customize color to use for the legend in pri... -
02:18 AM Feature request #13372: Integrate AT_GIS_GRID (NTv2 Transformation) in QGIS 2.8+
- This seems to be a local problem on your side. C:/OSGEO4W/apps/qgis/resoruces/srs.db contains gsb files in record 778...
2015-09-17
-
01:29 AM Bug report #13378 (Closed): Error when querying DB
- An error has occured while executing Python code:
Traceback (most recent call last):
File "C:/PROGRA~1/QGISWI~1/a... -
12:35 AM Bug report #13161: GetLegendGraphics Server Error
- I have tested it, and it seems to be an x-server problem (seems some changes in legend rendering now trigger the need...
-
12:31 AM Bug report #13117: cached wfs not downloading new features while panning
- Yep the 'caching' behaviour changed.
Before when you added a &BBOX to the provider uri (when using python interface)... -
12:28 AM Bug report #13377 (Closed): Unable to Snap to new features after saving, without reloading data
- We've seen an issue with Snapping to new features.
When you digitize a feature, snapping will work in Modes *Advance... -
10:44 PM Feature request #13372: Integrate AT_GIS_GRID (NTv2 Transformation) in QGIS 2.8+
- Problem seems to be not-writeable srs.db
-
04:44 PM Bug report #13298: Shapefiles corrupting - objects and attributes becoming switched
- Opps - forgot to mention, the above tests were done with the file on the local drive.
-
- I found the shapefile and object that was having ONE of the issues (not the attributes and objects getting switched) ...
-
- I found the shapefile and object that was having ONE of the issues (not the attributes and objects getting switched) ...
-
- I found the shapefile and object that was having ONE of the issues (not the attributes and objects getting switched) ...
-
- I found the shapefile and object that was having ONE of the issues (not the attributes and objects getting switched) ...
-
- I found the shapefile and object that was having ONE of the issues (not the attributes and objects getting switched) ...
-
- We experience similar issues when using the 'Avoid Intersection' function.
We start with perfectly valid geometries, ... -
04:13 PM Bug report #13162: Unable to stylize raster as Singleband Pseudocolor
- Thank you so much Harrissou. I've already done so. The problem is that the Kyngkaos compilation is more complete than...
-
- Fixed in changeset commit:"55027e545f6265aaeda47dc48923cd5be6a47d74".
-
02:18 PM Bug report #13376: QGIS crashes when trying to create heatmap
- Attached is the crashlog.
-
- I'm a new user of QGIS. I need to make a heatmap for my thesis and I'm fairly certain I downloaded and set up the pro...
-
02:04 AM Bug report #13374: Crash on loading MySQL geometry Layer
- crash dump for 2.8.3 attached.
2015-09-16
-
01:35 AM Bug report #13370: Maximum string length 255
- Thank you!
-
- If you are in Spatialite, you will not have the 255 charector limit, but on the other hand you can't delete a column!...
-
- If you are in Spatialite, you will not have the 255 charector limit, but on the other hand you can't delete a column!...
-
- Only one more thing...I saved the shapefile that I have in the spatialite format you said. Is it also possible to mod...
-
- Yes, I'm using shapefiles. Thank you for your answer.
-
- Are you using shapefiles?
It's a limitation of shapefiles, see http://gis.stackexchange.com/a/75096/9839 (only the f... -
- When saving attributes as "string", the maximum number of allowed characters is 255. Is it possible to implement this...
-
01:06 AM Bug report #13375 (Closed): scaling range in line pattern fill does not work
- Try to fill a polygon layer with a simple "Line pattern fill"
Set "Pen width" in "Map unit"
Enable "Adjust scaling ra... -
01:01 AM Bug report #13364: Weird behaviour after merging 2 or more lines
- michele zanolli wrote:
> Confirmed, I think it's related to #11400 (and more explained, see my last post)
Thanks - y... -
- Confirmed, I think it's related to #11400 (and more explained, see my last post)
-
- While trying to connect to a MySQLDB serving geometries, QGIS crashes when loading the layer (POINT with only one ent...
-
- while loading a WMS (1.3.0) it is possible to tell QGIS to ignore the delivered GetCapa, GetMap and GetFeatureInfo UR...
-
11:48 PM Bug report #13368: Difference tool generates invalid geometries
- This is the faulty geometry as WKT and it is a polygon which has a hole outside the shell. It should be either two di...
-
-
03:05 PM Bug report #13368: Difference tool generates invalid geometries
- there may sure be a gap, but is it a valid reason to produce an invalid geometry?
I understand that if I operate on v... -
- There is a gap between FID 1 and FID 3 and hence the difference comes up with the small polygons.
-
- There is a gap between FID 1 and FID 3 and hence the difference comes up with the small polygons.
-
- There is a gap between FID 1 and FID 3 and hence the difference comes up with the small polygons.
-
- When using the Difference... tool on two layers with valid geometries, QGIS produces a layer with invalid geometries....
-
- Compared to previous versions in QGIS 2.10 no *.gsb-Files seem to be referenced in srs.db (for NTv2 Transformations) ...
-
- There are definitely two 'phantom' objects that remain in the table unless a save-as is done.
Simply by populating a ... -
- It was a very random issue and we never got to the bottom of what was even causing it.
I did have another shapefile ... -
05:05 PM Feature request #13371 (Open): Move default style to themes folder
- Now that we have theme support via stylesheets all style work should be moved outside of the application. Currently ...
-
- There is already an option in QGIS which prompts users to define the layers with unkown projections. You need to acti...
-
- There is already an option in QGIS which prompts users to define the layers with unkown projections. You need to acti...
-
- There is already an option in QGIS which prompts users to define the layers with unkown projections. You need to acti...
-
- From what i understand from you, the file is in different projection from the start. If that is the case, and QGIS do...
-
- I know, and i want to change the CRS of my layer to be 4326
From what i remember QGIS have this function , but i am ... - 12:09 PM Bug report #13369 (Closed): crash on exit
- Fixed in changeset commit:"0826290c8ea84991ed788b97fad31e12c82d6189".
-
- I just start QGIS and then quit it.
Your patch fixes the crash here. Thanks. -
- Hmmm... I cannot reproduce it.
Are you dealing with raster layers? Doing something fancy when exiting like leaving th... -
- With the latest master I am getting a crash when quitting the application...
-
08:58 AM Bug report #3609: in a reprojected raster "zoom to best scale (100%)" does not work
- I have created pull request "!#2314":https://github.com/qgis/QGIS/pull/2314.
-
- fixed in commit:c54ea43
-
- fixed in commit:c54ea43
-
- This error is mostly likely caused by an invalid geometry.
This invalid geometry was however created by QGIS itself, ... -
- Indeed, the geometry is invalid.
This invalid geometry was however created by QGIS itself, so I reported a new bug #1... -
07:27 AM Bug report #13346 (Closed): Import CSV via "add delimited text layer" ignore first line of file csv
- Jukka Rahkonen wrote:
> Works OK for me with QGIS 2.10.1 on Windows. I edited the csv file to have headers only once,... -
- Jukka Rahkonen wrote:
> Works OK for me with QGIS 2.10.1 on Windows. I edited the csv file to have headers only once,... -
- Jukka Rahkonen wrote:
> Works OK for me with QGIS 2.10.1 on Windows. I edited the csv file to have headers only once,... -
- Works OK for me with QGIS 2.10.1 on Windows. I edited the csv file to have headers only once, checked the First recor...
-
06:42 AM Bug report #13367 (Closed): [composer] map rotation with angled symbol
- hi,
Symbol With ellipse marker, with height, width and angle defined in "data properties".
If I use map rotation, th... -
02:30 AM Bug report #10815: refine rules (add ranges/categories): expressions not applied/written correctly
- I can reproduce this bug in 2.10.1.
Basically when you refine a rule (adding range or category both) using an express...
2015-09-15
-
- Geometry FID=2 is
@POLYGON ((
-43.208452 -22.909126,
-43.207489 -22.908866,
-43.206147 -22... -
- Sorry, I made a mistake.
The feature that makes things dissapears is the third one(FID 2).
In effect it seems that t... -
- Works fine in 2.8.3
Feature 2 seems a bit odd. Worth deleting and trying. -
- Works fine in 2.8.3
Feature 2 seems a bit odd. Worth deleting and trying. -
- Confirmed and marked as blocker.
-
- Confirmed and marked as blocker.
-
- Confirmed and marked as blocker.
-
- Hi!
When I select 2 or more lines (they "touch" each other with endpoints) and merge them with "Merge selected featur... -
- The numbers in your coordinate status bar don't look like to be EPSG:4326.
You are assigning a wrong CRS to your layer. -
- I will never know if changing the CRS will work or not in QGIS, for over 2 years, each time that i got a project wher...
-
- Unless I'm misunderstanding, this isn't reproducible in current versions.... Can you confirm?
-
06:21 PM Bug report #13344: Processing Import into PostGIS: list of connection does not refresh
- I have noticed this as well since at least 2.6.
Seems odd. The code populates the DB selections from QSettings, whic... -
04:49 PM Bug report #13366 (Closed): Crash when adding new field, changing its value and deleting the same...
- QGIS master crashes when adding new field with 'Field calculator' and deleting the same field without save.
This do... -
- I'd suggest using another tool (e.g. v.clean) from processing.
-
- Hi ,
thanks for looking into this.
You are correct in saying that it works for feature 674. The error however does no... -
- You can download nightly builds at "Dakota Cartography":http://qgis.dakotacarto.com/ website (even if the site seems ...
-
07:55 AM Bug report #7037: WMS Server Search returns Network Error 301
- Problem still persist: Network error 203.
The geopole search WMS service is always down.
Suggestion: simply remove "s... -
- Could be related to this #13297
-
- I saved test.shp as test2.shp and then deleted features 4 and 10. The issue does not occur on test2.shp.
-
- Could you also save it as new shapefile and test?
-
- Additional testing: I imported the shapefile to a PostGIS database and was unable to recreate the problem. It appears...
-
- Additional request: Can we mark this for causing corruption?
-
- OK. More weirdness. When I delete features 4 and 10, commit edits, turn off editing, and then zoom, all features in t...
-
- Could you try with master?
-
- Could you try with master?
-
07:00 AM Bug report #10068: QGIS server caches layers with same ID but in different projects as one
- Updated in 2.8 version ?
-
- not sure if it is crs related, but to reproduce:
- create a project in epsg:3857 and load either a world shape file ...
2015-09-14
-
01:30 AM Bug report #11522: Most default SVG marker images rendering broken, border lines too thin, under ...
- It seems that these are bugs in the symbol definition, not in the software.
As an example:
in file svg/accommodation... -
- Feature 0 does not appear to have any geometry?
In QGIS 2.8.3 it works fine on 674.
-
- Feature 0 does not appear to have any geometry?
In QGIS 2.8.3 it works fine on 674.
-
- Feature 0 does not appear to have any geometry?
In QGIS 2.8.3 it works fine on 674.
-
- When trying to use the tool "Eliminate sliver polygons" I get the following error
An error has occured while execut... -
- Hi,
during editing (adding new feature or splitting existing) there is new message "validation finished" at the top ... -
12:05 AM Bug report #13192: Error when saving Matplotlib figure
- When running a python script in processing that involves matplotlib.pyplot in windows 2.8 LTS saving a plot as png ca...
-
- Hi!
In "Settings/Options/General/Timeout for timed messages or dialogs" user can't set 0 or 1 value, only 2 or more... -
- Thanks:)
-
- And also I can see the split.
Thanks Matthias. -
- Not showing the newly added ring has just been fixed.
-
12:10 PM Bug report #13034 (Closed): Cannot render script as parent algorithm in Graphical Modeler
- Fixed in changeset commit:"2a260edba86821e6bb5e3429044a0822fc4d7ba0".
-
- Nathan Woodrow wrote:
> Did you use the "First line is headers" option?
I don't use. -
- When trying to merge two features, one of them is simpçy deleted.
The attached file shows the problem. Basically you ... -
05:30 AM Bug report #13308: Crash QGIS 2.10.1 after select MultiGeometry features from PostGIS into Tempor...
- I suspect I ran into something caused by the same problem.
Reproducible in the following way:
1. Add multilinestri... -
- Fixed in changeset commit:"d8976247047397af31e27e4427c54d9a6892be03".
-
- Fixed in changeset commit:"c84b2dfe61ecc8fcdc72b534dde0831ed763c1c4".
-
- Can you confirm that they are running 2.8.3?
-
02:22 AM Bug report #13357 (Closed): Layers populated with empty diagrams after migrating project from old...
- I was facing this issue after upgrading QGIS from Brighton to Pisa for my clients:
http://gis.stackexchange.com/ques... -
- Honestly... given the timing involved, huge number of regressions, and lack of developer presence, is it worth postpo...
-
02:48 AM Bug report #13276: node tool regressions and issues
- Nyall Dawson wrote:
> >Also, pre-selection should allow multiple nodes selection to allow their deletion at once (oth... -
02:09 AM Bug report #13356 (Closed): editing in file geodatabase
- In QGIS 2.6 (Brighton) was het mogelijk om te editeren in een file geodatabase. Dit is niet meer mogelijk in de versi...
2015-09-13
-
01:55 AM Bug report #13276: node tool regressions and issues
- > I believe it was also possible to move multiple nodes at once in 2.8. Not sure how that can be translated to the cl...
-
- >Also, pre-selection should allow multiple nodes selection to allow their deletion at once (otherwise, we have a regr...
-
- Also, pre-selection should allow multiple nodes selection to allow their deletion at once (otherwise, we have a regre...
-
- It also does not show the newly added ring. User needs to refresh to see the changes.
-
- Problem exists in 2.11.0-66
-
- Using fill ring under advanced digitising causing segmentation fault in qgis master.
-
- Hi,
Open a shapefile and toggle it to edition
Create a feature
with the advanced digitizing tool "Fill ring", create... -
- I can confirm that it works fine with the patch. Please re-open if you still have problem.
-
-
- It is also with shapefiles too.
-
- Already fixed in master and 2.8.4
-
- Already fixed in master and 2.8.4
-
07:54 AM Bug report #13351 (Closed): Random Color Ramp - Saturation not working
- In the Random Color Ramp dialog window, the values entered as the low and high boundary of saturation to not seem to ...
-
09:45 AM Bug report #13352: Symbology - Size assistant bug
- Hi Vincent, could you check that issue?
Régis -
- The excellent Size assistant dialogue for setting data-driven symbology properties generates an expression where the ...
-
09:35 AM Bug report #13353 (Closed): QGIS and gdal 2.0.0
- Working through the training manual, I ran into trouble in section 14.7.3 attempting to "Join Attributes by Location"...
-
- It is a regression.
-
- Did you do a upgrade or dist-upgrade?
-
- Did you do a upgrade or dist-upgrade?
-
- Duplicate of this #13273
-
- QGIS doesn't seem to handle vectors with overlapping features properly and throws out some random errors when editing...
-
- QGIS doesn't seem to handle vectors with overlapping features properly and throws out some random errors when editing...
-
- Works fine for me under windows and gdal/ogr 1.11.2 for 2.8, 2.10 and master.
-
- Works fine for me under windows and gdal/ogr 1.11.2 for 2.8, 2.10 and master.
-
- Duplicate of this #13272
-
- I am no Italian but seems to be duplicate of #13331!
-
- Duplicate of this #13272
-
- Can you disable the plugins and try again (by renaming .qgis2 under user folder)?
Also, could you disable globe plugin? -
- Consider, upgrading to 2.8.3
-
- I can't replicate your problem. It buffers instantly.
Also, your shapefile is not "topologically correct". There are... -
- I can't replicate your problem. It buffers instantly.
Also, your shapefile is not "topologically correct". There are... -
- I can't replicate your problem. It buffers instantly.
Also, your shapefile is not "topologically correct". There are... -
- Another problem #13347 reported with split tool which I think is related.
-
- Another problem #13347 reported with split tool which I think is related.
-
- This affects the feature count. Deleted features still appear in feature count.
2015-09-12
-
05:39 PM Feature request #13350 (Closed): Ignore "maxRecordCount" limit when adding Vector Layer from GeoJ...
- Layer > Add Layer > Add Vector Layer displays a popup where you can select 'protocol' and import a layer from a URI.
... -
- I outlined the issue here: [[http://gis.stackexchange.com/questions/162713/qgis-can-imported-arcgis-vector-layer-draw...
-
- Thanks Giuseppe for the fixes!
Beside the missing geopackage/browser support I still see a number of inconsistencies... -
- Thanks Giuseppe for the fixes!
Beside the missing geopackage/browser support I still see a number of inconsistencies... -
- When editing with the node tool in QGIS master, it is no longer possible to select multiple node by draggein the mous...
-
- The default behaviour should be a warning to user to fill in those attributes, if user chooses to have the name based...
-
-
- Could you test in QGIS master?
-
- Confirmed...marked as blocker.
Not sure if it is digitising or map canvas. -
- Confirmed...marked as blocker.
Not sure if it is digitising or map canvas.
2015-09-11
-
- Could you try on the local drive?
-
- You need to restart QGIS or start a new project for the setting to take effect.
-
04:23 AM Bug report #13342 (Closed): Layer toogle overrides on-the-fly CRS transformation setting
- Not sure if this is intended or a bug. But when I have two layers with different CRSs in a project, toggling them in ...
-
- No attachements!
-
- When rendering long line geometries and zooming in, the line can render incorrectly with segments crossing the canvas...
-
-
- Did you use the "First line is headers" option?
-
- file csv with first line repeat
-
- Import CSV via "add delimited text layer" ignore first line of file csv.
The first line contain the name of fields, i... -
- Win 7 x64 sp1
-
- Hi!
In qgis dev 2.11.0-64 when I split during editing session feature (line or polygon) with Split features tool I ... -
- Fixed in changeset commit:"8640c1300265a81bf5122d4510e01668e38f700f".
-
- >The idea of the pre-selection is that the node is selected but doesn't follow the mouse.
>In such state, you can:
... -
- I would rephrase to:
you can navigate in the pre-selection (i.e. browse nodes) by:
* selecting a row in the table v... -
- > The pre-selection of a node is triggered by:
the selection of its corresponding row in the table view
the end of a ... -
- The idea of the pre-selection is that the node is selected but doesn't follow the mouse.
In such state, you can:
* de... -
- >deleting a node: when finished, the next node should be pre-selected (this pre-selection should by synchro with the ...
-
06:35 AM Bug report #13345 (Closed): Processing Import into PostGIS: set default output SR
- The output SR is compulsory (without it it silently fails): better use the input SR as a default, and in any case war...
-
- New PoastGIS connections are not listed on the list of connections in the Processing dialog; QGIS has to be restarted...
-
- Fixed in changeset commit:"8731065715eff4784aab1ad614cd4dd1c0463413".
-
04:02 AM Bug report #13058: Remove internal OWSlib copy
- No movement on this issue yet. For reference/explanation, see this "discussion":http://osgeo-org.1560.x6.nabble.com/...
-
- I say it is a regression. I will check with dev, 2.10 and 2.8.
Could you also check with QGIS processing toolbox. Fo...
2015-09-10
-
12:45 AM Bug report #13341 (Closed): DBManager doesn't import view from table with non numeric key
- DBManager can import without any problem PostGIS geometries with non numeric Primary Key.
When a view is made from a ... -
- I have made exactly the same changes in v2.10 to the original file as those I made in v2.8.2 to the copy.
In QGIS it... -
- I just performed another test...
I made a copy of the troublesome Shapefile in file explorer (I did not do a save-as... -
- This is the only one I have noticed it with.... but then I'm not uploading all my layers into another platform such a...
-
- Yes the files were on a network drive.
Objects were topologically correct (no errors when running "check geometry va... -
- Yes, something exactly like what is possible in MapInfo would be great!
-
08:38 AM Bug report #13340 (Closed): In MSSQL vector layer, adding new attribute column in attributes tabl...
- The message after save is: "Impossibile applicare le modifiche al vettore" (impossible to apply the mods to vector .....
-
- Fixed in commit:3ff3b02
-
- Fixed in commit:3ff3b02
-
06:15 AM Feature request #13110: Georeferencer: Ability to produce compressed output
- Well, I'm not asking for workarounds, but for user-friendly compression methods by default. Normal users will not kno...
-
- When trying to create a new composer, if you don't give it a name (so it uses the default one), no composer will be c...
-
- Hi,
if possible please submit this patch as pull request on github, thanks!
-
- Steven Mizuno wrote:
> During a process of qualifying recent versions of QGIS I find that the" Zoom to best scale (10... -
- I think you should consider to put just POI geometries and IDs into the main table and tags into another table joined...
-
03:21 AM Bug report #13338 (Closed): problems with the style of simple markers in pointlayers in QGIS 2.10...
- In QGIS 2.10.1 the styles of simple markers in pointlayers can't be changed anymore. For example it isn't possible to...
-
- > It is debatable wether a vertex tool should remove not only vertices, but also features or rings. There are other t...
2015-09-09
-
- https://github.com/qgis/QGIS/pull/2305
-
01:21 AM Feature request #9737: Partial canvas redraw
- So glad to see that QGIS Pisa has embraced this solution. Thumbs up :)
-
- see #13276 for complete overview of node tool problems
-
- see #13276 for complete overview
-
- I'll try to make the point, as of today's master
* deleting a node: the rubber band is not removed
* deleting a nod... -
- I have seen similar feature in Mapinfo. This is a feature request.
-
- I have seen similar feature in Mapinfo. This is a feature request.
-
- This may not be a feature request (if someone can tell me how to do it).
When you have a polygon layer that has no g... -
12:59 AM Bug report #13058: Remove internal OWSlib copy
- Is there any news about this requirement?
PS: For some reason the original ticket where we exchanged on this (with th... -
- Is the file located on a network drive?
Is your file topologically correct? I have seen this happened in the past whe... -
- Is the file located on a network drive?
Is your file topologically correct? I have seen this happened in the past whe... -
- Does it happen with other layers or only this one?
In my experience, it usually happens to the layers with topologic... -
- It is by no means happening all the time.... just occasionally!
I am also having other issues where running an inters... -
- It was v2.10.1
I didn't have the file anymore - cleaned them up after resolving the issue.
However, I have been able... -
- It was v2.10.1
I didn't have the file anymore - cleaned them up after resolving the issue.
However, I have been able... -
- It was v2.10.1
I didn't have the file anymore - cleaned them up after resolving the issue.
However, I have been able... -
- Which version of QGIS? Could you provide an example file?
-
- Which version of QGIS? Could you provide an example file?
-
11:00 PM Bug report #13302 (Closed): long line in legend
- Fixed in changeset commit:"d7103dfb1b51bc9f28bde348b3781aba5ca107a2".
-
- fixed here https://github.com/qgis/QGIS/pull/2300
-
- fixed here https://github.com/qgis/QGIS/pull/2300
-
07:12 PM Bug report #8285: Saving styles (qml and sld) doesn't work for CSV layers under Windows
- Present in QGIS 2.10.1 under Windows 10
-
06:03 PM Bug report #13330 (Closed): GPS live tracker connects to GPS but gives no positional information,...
- Okay thanks - I'll close this down.
-
- That you were seeing the satellites/signal strength told me that the $GPGSV data were being sent (I know too much and...
-
- I managed to solve this. Turns out QGIS does not handle NMEA data with the prefix $GN, only with the prefix $GP. The ...
-
- Can you share your raster file and the expression you are using for the calculation?
-
07:03 AM Bug report #13336 (Closed): Allow raster calculator with huge raster inputs
- Hello,
I am trying to do some raster operation with Qgis' Raster Calculator but I get a minidump error and Qgis cras... -
01:50 PM Bug report #13301: Load more than one shp file, making some not visible, and 'Identify Feature' w...
- The suggestion to switch the mode of the Identify tool to 'top down' gave me the expected behavior.
Perhaps this sho... -
-
- I know that a normal database should look like that, but what i try to do it`s not a normal database setup.
I am no... -
- The limit you hit is the SQLite limit "Maximum Number Of Host Parameters In A Single SQL Statement" which default to ...
-
-
- Can you try and convert it from Osgeo4W shell using ogr2ogr?
-
12:37 PM Bug report #12956: DB Manager: copying a table from a PostGIS schema into another fails
- I never had "Error 5" again. Meanwhile I've installed QGIS 2.10.1 (Ubuntu 14.04) and the sequence is still missing af...
-
- SPIT doesn't create spatial indices and 'geom' is the last column of all. I prefer 'geom' at the second position afte...
-
12:14 PM Bug report #13331: QGIS master crashes on exit
- Updated: the same happens under Linux 32 bit
-
07:01 AM Feature request #13335 (Open): http- field attribute from WMS-service gives highlighted/clickable...
- In certain WMS-services, attribute-info comes with a http://-hyperlink. This hyperlink is viewable on the internet en...
-
05:51 AM Bug report #13310 (Reopened): nightly build packages failing to install with grass error
- This error is still occurring:...
-
AI files are (I think) closed files. I created SimpleSVG plugin some time ago to be able to export not too complex t...
2015-09-08
-
11:59 PM Feature request #13333 (Open): Export to Adobe Illustrator format
- One big QGIS dream would be to have an Illustrator (AI) file export from QGIS (like the one in ArcGIS) where text sta...
-
- I can also join in for beta testing on OSX. What do I do?
-
08:45 PM Bug report #13143: Print Composer won't export PDF
- Actually it won't export an image neither. I found the same issue on 2.10.
It seems its related to the HTML renderin... -
- Already done thanks to Nyall
-
- Great thanks for the that. I've attached a log file. There are no $GPGGA and $GPRMC lines in the log, and also no $GP...
-
- What NMEA sentences are reported by the GPS? One way to see is to enable Log file in GPS Information and connect for ...
-
- I'm using QGIS with a Panasonic Toughpad FZ-M1 with inbuilt dedicated GPS. I can connect okay to the GPS using View -...
-
- When Settings|Options|Rendering, Rendering quality: "Make lines appear less jagged at the expense of some drawing per...
-
- Update: this did not happen with QGIS 2.10 (released)
-
- Hi,
QGIS master win32 crashes on exit. To reproduce, just start QGIS nightly and then close. It will
create minidump... -
- Basic problem fixed with commit:72665e0. More comprehensive solution needed.
-
- During a process of qualifying recent versions of QGIS I find that the" Zoom to best scale (100%)" still is not worki...
-
- During a process of qualifying recent versions of QGIS I find that the" Zoom to best scale (100%)" still is not worki...
-
- During a process of qualifying recent versions of QGIS I find that the" Zoom to best scale (100%)" still is not worki...
2015-09-07
-
- Got another error when trying to save as SHP ( 256 columns limit )
when trying to save as a SQlite got the errors at... -
- When trying to replicate a geographic table from a schema to another one, DBManager drag&drop doesn't work in QGIS 2....
-
- Fixed in changeset commit:"e8c3afa3984cee32b98b52ba65bcf5ed630ae72d".
-
- That's not the issue though - the issue is the rubberband doesn't cope with navigating through points using > and <
-
- > - Select a node with left click, QGIS starts moving it
This is the intended new behavior to allow advanced digitiz... -
- I'm seeing this behavior with deleting nodes in a polygon:
- select a node, press delete
- QGIS starts MOVING the ne... -
- deleting nodes: it should not delete the feature but rather empty the geometry.
with lines: you can end up having onl... -
- >- can't delete a node anymore, right?
Is this still true? I can remove features with the node tool. Or do you mean ... -
- Actually, that last point is a dupe of #13099. Sorry for the noise!
-
- Another regression is that the node tool can't be used to remove a ring anymore... before you could progressively rem...
-
11:13 PM Bug report #13325 (Closed): QgsVectorFileWriter doesn't create fields when writing a new shapefile
- Thank you! I've updated the cookbook (deleted "optional").
-
- Thank you! I've updated the cookbook (deleted "optional").
-
- you have to delete the writer in order to close the writing of the shapefile. This is mandatory right now....
-
- This snippet does not work as expected...
-
- Would be covered by #9292
-
- Would be covered by #9292
-
06:35 PM Feature request #12342: Options for multiple scalebars
- Also useful for most maps of the USA, since the standard is to include scalebars in both KM and miles.
-
- Instead of printing attributes to each element in an exported SVG, printing the styles to a class and printing only t...
-
- When using *Add Image* to add an SVG in the print composition, SVG parameters cannot be used. If the item properties ...
-
- Ok, reproduced, it's on legend refresh that the size increases. I think I know where the problem is, will fix that as...
-
- This is very easy to reproduce. I created a project with tests/testdata/lines.shp and you can watch what is happening...
-
- Hi Denis,
I have tried to reproduce with today's master tests/testdata/lines.shp and failed (legend looks OK both in... -
- I can confirm it on Windows and I also can confirm it works fine in LTR version.
-
06:23 AM Bug report #13308: Crash QGIS 2.10.1 after select MultiGeometry features from PostGIS into Tempor...
- Demonstration
-
- I am using Windows 7 x64, Windows 10 x32.
Now I tried to reproduce the crash with all plugins deactivated - also crash. -
- I am not able to reproduce the crash in master version.
Which platform are you using?
Have you tried to reproduce th... -
- The options:
`io_gdal -TRANSFORM `
should be replaced by:
`io_gdal 0 -TRANSFORM 1`
so the import does not fai... -
- Marco Hugentobler wrote:
> It is debatable wether a vertex tool should remove not only vertices, but also features or... -
- It is debatable wether a vertex tool should remove not only vertices, but also features or rings. There are other too...
2015-09-06
-
11:54 AM Bug report #13323 (Closed): Chiusura anomala a conclusione di una sessione di lavoro (evento ripe...
- Dettaglio sistema
Sistema operativo: Windows 8.1 64 bit
Versione: 8.1 o versione successiva
Architettura di sistema:...
2015-09-05
-
- Fixed in changeset commit:"f153743cf8905a2f435621b2ee70c957ce2691b4".
-
- Fixed in changeset commit:"9133538a749eef63263923a375eeeddb53178d84".
-
03:20 AM Bug report #13203: When opening Shapefile the .cpg file is ignored in Windows 8.1
- @Adrian Klink, I'm sorry. I had a misunderstanding. I do not get CP932 shapefiles with LDID/87. I get shapefiles with...
2015-09-04
-
- Adrian Klink wrote:
> What happens if a Japanese CP932 Shapefile is being opened by drag & drop? Will it fail? Does t... -
06:30 AM Bug report #13203: When opening Shapefile the .cpg file is ignored in Windows 8.1
- I am not sure if I get it right, but if I understand it correctly the automatic shapefile encoding detection is block...
-
- Fixed in changeset commit:"eea81e81c54dba518422f2ff2a6948b049b123b9".
-
- That's layer registry, not TOC...
Anyway layers must be removed either once the preview changes or the DBManager main... -
- That's layer registry, not TOC...
Anyway layers must be removed either once the preview changes or the DBManager main... -
- That's layer registry, not TOC...
Anyway layers must be removed either once the preview changes or the DBManager main... -
- I'm closing it.
Adding a timer or something similar doesn't help. If the execution is stuck within the database, the... -
- I'm closing it.
Adding a timer or something similar doesn't help. If the execution is stuck within the database, the... -
- Should be fixed in commit:4ab2fba. (at least it should be more tight)
-
- Roberto BobMaX wrote:
> I want to dissolve your doubts.
>
> I have (indeed, we all have) the minidump messages from ... -
06:19 AM Bug report #13272: crash on quit
- I want to dissolve your doubts.
I have (indeed, we all have) the minidump messages from QGIS 2.0.1 version (that is... -
- I am a little bit confused....
Which the version affected is? (ok, I see it is since 2.0, but it is no longer candid... -
- In this moment DBManager allows to add new Spatialite connections only.
Anyway you can add new PostgreSQL connection...
2015-09-03
-
- Hi Paul, could you test it again with the latest trunk?
-
- Fixed in changeset commit:"13e1959f4d8b666112d27893fe7c50b0b101cb0f".
-
- Fixed in commit:03916d549
-
- Fixed in commit:03916d549
-
- About GPKG support on DBManager, it's fixed in commit:03916d549.
Now tables are listed with geometry, table and prev... -
- GDAL uses .sbn index read-only. When shapefile is saved after edits GDAL should delete the obsolete .sbn file. You sa...
-
- Hi,
here on osgeo4w, when dropping down menu project / recents projects, project list goes full screen, hiding qgis ... -
- Fixed in changeset commit:"ffd82a31052037cbcf8c29816c534452d8d5f797".
-
- Fixed in changeset commit:"bef84dc67650cd89dc0bad95596e3caeb7de0383".
-
- So far - my git bisect indicates that this bug was introduced with the new expression contexts (commits from August 22)
-
- duplicate of #13162
-
- duplicate of #13162
-
04:09 AM Bug report #13320 (Closed): Unable to set single band raster to pseudocolour
- I am unable to change the colour of a single band raster image from single band grey to single band pseudocolour. Se...
-
03:53 AM Bug report #10887 (Reopened): Qgis return empty QgsComposition from standalone application
- *Qgis 2.10 version still returns empty QgsComposition from standalone application* ...
-
- *Qgis 2.10 version still returns empty QgsComposition from standalone application* ...
-
02:05 AM Bug report #7061: Incorrect rendering of dash pattern with zero-length dash for thin lines
- Anita Graser wrote:
> The points you see are caused by the square cap style. They should vanish if you change that to...
2015-09-02
-
01:41 AM Bug report #13319 (Closed): SBN / SBX files using by Pisa ? (no problem with 2.8)
- Hey,
I have a problem : if the shapefile have sbx and/or sbn files, there is an issue with split polygons... only wi... -
- Yes! I guessed yesterday! Thanks.
-
- Try cloning the symbol. Change:
symbol = Mlayer.rendererV2().symbols()[0]
to
symbol = Mlayer.rendererV2()... -
- Here is the link to the project - file was too big to attach it to this bug report.
http://webgis.uster.ch/temp/dd_p... -
- In current master (as of commit:03916d5 - Sep. 3) there is something seriously broken in data-defined symbology.
Act... -
- The new create circular string tools are enabled while editing point layers. They should be disabled as they have no ...
-
- Duplicate of #13162
-
- Duplicate of #13162
-
- From the new version 2.10.1 nothing happens when I change the options in Band rendering in Layer properties->Style. W...
-
09:08 AM Bug report #13315 (Closed): exporting atlas with null column for filename
- so i created a test project
1. extract "hub_qgis.zip"
2. open "test_atlas"
3. open print composer "atlas_test"
4. ex... -
- After some tests, it seems that it was due to "identified feature(s)" from a layer, even though I'm not sure there wa...
-
- I add a layer to my TOC and while canvas was refreshing, I toggle to invisible some of the layers. Doing all this so ...
-
-
- In the new atlas preview system, selecting the last feature in the drop-down list does nothing!
2015-09-01
-
- I think this request should be closed since the feature has been added.
-
- Since 29 Aug, nightly builds from the debian-nightly vivid repo have been failing with this error:...
-
- It would be great to add options for rounded corners on print layout elements other than the shapes - mostly the Lege...
-
-
- The load template function has been moved for many releases.
Adding items from the template allows you to keep some ... -
- In the Map Composer you can save Layout Templates, but you can not load them. You can only load the Items from a temp...
-
08:06 AM Bug report #13290: Zipped Shape result "not valid"
- Yes, I confirm that this workaround works for me too (thanks for it). But that is, a workaround (that confirms my zip...
-
- Hi,
I neither can add zipped shape files through "add vector Layer" tool though I think I've done it long time ago.
M... -
07:44 AM Bug report #13271: QGIS fails to launch or hang while exiting due to thread issue with OWS servers
- In commit:e95bf6d is implemented solution which I believe is the right one. QgsNetworkAccessManager::instance() is us...
-
- Hi,
This is not a bug but might have to do with the mode you set for the Identify tool. reading "this":http://docs.qg... -
- I have created a plugin which selects objects from a PostGIS table by rectangle and puts it into new Memory Layer. Ty...
-
- I think it was an error to backport this to 2.8.3 as it changes the behavior, as noted by a user who was negatively a...
-
- I think it was an error to backport this to 2.8.3 as it changes the behavior, as noted by a user who was negatively a...
-
- I think it was an error to backport this to 2.8.3 as it changes the behavior, as noted by a user who was negatively a...
-
- I think it was an error to backport this to 2.8.3 as it changes the behavior, as noted by a user who was negatively a...
-
- Would it be possible to implement the same printing feature as in QGIS Cloud? It's much easier to determine paper siz...
-
- Locking a Map in a composer layout prevents you from panning and zooming. Why is this feature removed?
-
- I have created a module in which there is a need to create a New Print Composer and add to Composer some rectangles, ...
-
- I see that this issue persists in QGIS Pisa. I still would like to know why the layouts can't be loaded on demand?
2015-08-31
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
- apparently a regression - it used to do that (BTW I didn't verify that it currently doesn't)
-
12:51 AM Feature request #13303 (Feedback): Saving changes in shape files when saving project or/and closi...
- We have discovered, that when you close down QGIS, it automatically asks you, if you want to save the project you are...
-
- Agreed, thanks for pointing this out.
My system is all from standard packages, a local issue is unlikely, or anyway u... -
> So one can simply do a diff between both files to see the changes.
there are a few changes that will need to be ...-
- Here one can find the diff in interfaces:
SAGA 2.2.0
https://sourceforge.net/p/saga-gis/wiki/Changelog%202.2.0/atta... -
- Tried a few more tools, I always get:
Error: select a tool
Chengelog is here:
http://sourceforge.net/p/saga-gis/wi... -
- On Windows the above 2.2.0 module works fine. My test under Linux is inconclusive because SAGA 2.2.0 io_gdal seg faul...
-
- this does not happen in the layer properties:
!https://cloud.githubusercontent.com/assets/127259/9597385/5f291acc-50... -
- Recently, I have a weird thing in a legend entry: the line smybol is way too large and I can't see the text if the do...
-
- This was confusing, but I think I see what is going on now.
I loaded 3 shp files. I downloaded:
ftp://ftp2.cen... -
- The filter legend function does not work when using Presets for the map frame.
It works perfectly fine if this is no... -
- Has anyone else experienced excessively slow saving of QGIS project files (not edited layers) when saving the project...
-
- We've had recent experiences with one particular shapefile, where randomly some aspects of editing either object geom...
-
- Recently experienced an issue much the same as this previously closed issue (#11007) where a shapefile was edited, so...
-
12:39 PM Feature request #10946: Non-integer key columns in MSSQL
- You should allow for supporting Global Unique ID(entifier) which is a unique 16 byte number. This is refereed to as G...
-
- When digitizing adjacent polygons using the "avoid intersection" rule, is easy enough at some point (especially if th...
-
10:18 AM Bug report #13295 (Closed): Issue with Postgresql enum visualisation in QGIS
- Default values for enum types are not displayed as the selected value in the column drop down menu when inserting ent...
-
- Fixed in changeset commit:"5326c6bd1bd5aebf9975d751f840750a491641a7".
-
-
- Attached :)
-
- which document?
-
- Whenever the type of a primary key for a PostgreSQL table is defined as BigInt, the ‘Feature Attributes’ pop-up windo...
-
- There is something wrong with the extent/coordinates with QGIS Server WMS on Windows.
Steps:
* create a project in W... -
- new description:
#13293-13
old description:
on QGIS server 2.8.3 WFS and WCS services stopped to work on W... -
- Not sure if this is a bug och if I should file this as a feature request, but if I have a layer with some _feature fi...
-
- Hi Nyall. Thank you so much for the fix. I've tried to patch QGIS with your solution but no luck. The problem persist...
-
06:08 AM Bug report #13251: Qgis can't distinguish between EPSG 32188 and EPSG 2950
- Hi,
Thank you for your solutions.
For now , since the files arrive one by one, the simplest method of correction rem... -
- Imho, this is not satisfactory for the following reason: If I have a client/template which requires a certain format,...
-
- QGIS Server used to read by default (without specifying the "map" parameter) the project where qgis_mapserv.fcgi (or ...
-
- I've some zipped shape file that I can't add to layers with QGIS 2.8 or 10.10, but worked fine on QGIS 2.2 (didn't tr...
-
- replicate is easy: import with osm2pgsql a osm dataset, the "osm_id" field (int8) will show this wrong behavior.
-
- > Dash patterns of this kind (with an entry with a zero-length dash) are useful to work around the missing phase shif...
-
- In QGIS Browser the geopackage connections show "invalid metadata".
Adding geopackage layers using the "add vector l... -
- See also https://github.com/qgis/QGIS/pull/2173#issuecomment-136005648
d&d from QGIS browser to DB Manager do not wo...
2015-08-30
-
- As pointed in the related issue, the thousand separator depends on your locale settings.
Isn't it working as expected... -
- I'm using QGIS Server + QGIS-Web-Client.
When I'm trying (QWC) to print to PDF a simple layer with line (or SVG) patt... -
09:49 PM Bug report #13284: Buffering using buffer distance field hangs, gives no result
- Buffering seems to work if I don't checkmark the "Use only selected features" option.
-
- On Windows 7 64 bit. Problem occurs on QGIS 2.6, 2.8.2, and 2.10.1 all installed on the same machine. I don't have an...
-
- I don't think there's actually a bug here. The points you see are caused by the square cap style. They should vanish ...
-
- Jukka Rahkonen wrote:
>
> I do not know how to make custom CRS to utilize nadgrids with QGIS. Reading this ticket a... -
- Jukka Rahkonen wrote:
>
> I do not know how to make custom CRS to utilize nadgrids with QGIS. Reading this ticket a... -
- Jukka Rahkonen wrote:
>
> I do not know how to make custom CRS to utilize nadgrids with QGIS. Reading this ticket a... -
06:38 AM Feature request #13283 (Feedback): Relative paths to files and photos
- Although there is a setting in the project properties stating that relative paths must be used, it is not possible fo...
2015-08-29
-
- confirmed (QGIS 2.10.1, Ubuntu 14.04)
-
- Actually - that's a unrelated issue. Closing this.
-
- Please note that the scaling of legend shapes in composer legends is intentional and is the same beahviour as previou...
-
- My fault, I accidentally did this.
-
- Paul please don't unassign people from tickets. They can do it themselves
-
- Please go to Settings/Snapping options and disable topological editing.
'for snapping, it's mainly the visual feedb...
2015-08-28
-
- Currently, the thousand separator for the numeric scalebar is hard coded to a space, i.e. "1:10 000". This style is u...
-
- The same behaviour is in Version 2.8.3.1 shown.
-
08:35 AM Bug report #13277 (Closed): QGIS trunk fails to build OS X
- Thank you, Radim. Your latest update has fixed the build issue on OSX.
-
- Add a WMS layer and a local layer in QGIS and set them visible
Create a print composer and add a composer map contai... - 07:53 AM Bug report #13218 (Closed): regression: rule-based symbology broken when a rule has an empty filter
- Fixed in changeset commit:"978265c9fb50802b6a62fc07cd1a61ae1402c11f".
-
- SAGA 2.2.0 is currently on Debian (testing and sid). As a result, a number of commend do not work, e.g.:...
2015-08-27
-
- The crash on startup: it happens randomly if more WMS servers are expanded:...
-
- There is a note about the warning https://github.com/qgis/QGIS/blob/1dfe005/src/providers/wms/qgswmscapabilities.cpp#...
-
- Tested again on 6bf5e91, welcome page does not display anymore. General options are set to Welcome page.
-
- Hi guys,
here on 64 bits windows, Welcom page is there but remains empty, either for news and recent projects.
I te... -
- Try once more with commit:32cf296.
-
- Thanks, Radim. Not there yet, though:...
-
- I tried to fix in commit:cee794a4c68, please test, I don't have OSX.
-
- <rest of log>...
-
- QGIS build is failing on the grass7 plugin as noted in the partial build log below. This has appeared within the past...
-
10:45 PM Bug report #13278 (Closed): Qgis crash saving postgis layer
- We have Postgresql/Postgis (9.1+134wheezy4 / 1.5) table of roads when a new line is created qgis(2.10) crash in debug...
-
- for snapping, it's mainly the visual feedback which is missing
-
- - snapping doesn't work properly with node tool
-
- Here is a list of issues/regressions with the node tool in master:
* deleting a node: the rubber band is not removed... -
- There is no visual feedback anymore when using the node tool on point layers.
we don't see it moving with mouse befor... -
- I used QGIS Pisa 2.10.1 on Windows 7 64 bit.
But, I had this minidump problem from QGIS 2.0.1
And, I know, many ot... -
- Sandro Santilli wrote:
> What's the affected version ? Can you get a backtrace from the dump ?
> Note that on unix yo... -
- What's the affected version ? Can you get a backtrace from the dump ?
Note that on unix you can prevent the creation ... -
- here's the file.
I also tried the latest nightly from Dakotacartography and the problem occur in that version too. -
- I can't reproduce in master (don't have 2.10).
can you provide some test data? -
04:08 AM Feature request #10398: "Photo" type Edit Widget with relative path
- Anyone can help us?
-
02:54 AM Bug report #13274 (Closed): API combine method for geometry
- Since update of qgis 2.10, it seems that the combine method doens't work as it did in 2.8
when you try to combine sev...
2015-08-26
-
- After updating QGIS to version 2.10.1-Pisa the split feature tool goes nuts! I try to split a line and when I finish ...
-
- this is the minidump file:
https://drive.google.com/file/d/0Bwg_m86uaXY1MVNBMVZJRVpuVGM/view?usp=sharing
I hope thi... -
- Image, where I run QGIS without plugins, and it crashes on quit (also with no activity done):
https://drive.google.c... -
- On Windows (7 or others) QGIS crashes with minidump when quit.
It happens also without plugins.
Deleting .qgis2 d... -
12:01 AM Bug report #13268 (Closed): Selecting features of field name with a leading digit
-
- Jürgen Fischer wrote:
> Gert Sterenborg wrote:
> > typo:
> > This problem does not occur when changing the layer name... -
-
- Gert Sterenborg wrote:
> typo:
> This problem does not occur when changing the layer name to for example A8_1, in tha... -
- typo:
This problem does not occur when changing the layer name to for example A8_1, in that case the expression: " *A... -
- For a python script I use [feature.id() for feature in layer.getFeatures(QgsFeatureRequest().setFilterExpression("8_1...
-
- After further investigation, the problem is with the _browser panel_.
If WMS server nodes are expanded when QGIS is ... -
- For a while now, my QGIS master builds would either fail to start due to a threading error. If it did start, the QGIS...
-
- Duplicate of #13162
-
- Duplicate of #13162
-
03:21 AM Bug report #13266 (Closed): Image stretch
- Not sure if it is only with the Mac version of QGIS 2.10.1, when you try change the image, for example to false colou...
-
11:30 AM Bug report #13270 (Closed): processing toolbox - clip tool in batch mode
- It was suggested I submit this as a bug - http://stackoverflow.com/questions/32168111/batch-processing-clip-layer-non...
-
- This seems to be a regression between Processing 2.9 and 2.10 where 2.10 fails to run models because it cannot find t...
-
05:51 AM Feature request #13267 (Open): Available plugin list ordered by date
- Given the increasing number of plugins, I think it's useful to be able to have the opportunity to list them in order ...
2015-08-25
-
02:11 PM Bug report #13265 (Closed): crash with minidump when splitting features(?)
- Hello,
I'm using QGIS 2.8.2, which is causing me the following problem: I select a polygon on a layer in edit mode an... -
- While exporting composer with world file, these files have extension like jgw, pgw, tfw....
When saving the map canva... -
08:33 AM Bug report #13263 (Closed): VRT file shows only paletted colormap of first layer
- Opening the attached VRT file in QGIS correctly shows all the layers and metadata but when selecting to display any o...
-
- Hi,
While exporting a print composer to image, a world file associated to a composerMap placed on a page other than t... -
- I'm seeing this behavior too. Seems to be a resurrection of bug #11007. Is this a regression?
-
- I believe there are two issues. First one it that after reading data in EPSG:2950 and EPSG:32188 they do not distingu...
-
- Hi,
Although the MTM and MTM Nad83 Nad83 (CSIS) are equivalent for most purposes, they are not identical. The differe... -
07:06 AM Bug report #12793: Minidump when adding a layer (vector, raster, etc.)
- Not sure if it is the same error but I get a crash and minidump every time I try to add a layer with *QGIS 2.10.1 Pis...
-
06:42 AM Bug report #13261 (Closed): Composer: items cannot be longer moved/resized/selected/unselected......
- After working on an item for a while IT MAY OCCUR (actually, it happens on at least 80% of the times I work with Comp...
-
- When the composer window is closed, it does not disappear from the window list in menu "Window" (this does not make C...
-
- Thanks Denis for the hint. It may work in this particular case.
However - quite often the individual rules can't be ... -
02:19 AM Bug report #12770: shapefile gets corrupted after editing
- I get the same problems when editing a shapefile that was created first under QGIS 2.6 and opened after with QGIS 2.8...
-
- I get the same problems when editing a shapefile that was created first under QGIS 2.6 and opened after with QGIS 2.8...
-
- I get the same problems when editing a shapefile that was created first under QGIS 2.6 and opened after with QGIS 2.8...
2015-08-24
-
- it works if you nest the two rules (Gestrichelt2 and Punktiert) into the Unterirdisches Gebaude, which I believe woul...
-
01:11 AM Bug report #13259 (Closed): Editing attributes with feature form on vector layers duplicates feature
- When I edit the attributes with feature form on vector layers then a new duplicate feature is created. If I edit the ...
-
- For a layer with single geometry, delete part cannot make it geometry less anymore.
The tool doesn't give any info to... -
- To be consistent with other map tools, the right click should cancel the node edition and not validate it.
-
- Fixed in changeset commit:"a2ce73aec07473b53159a5a87dfdea79944afacc".
-
03:27 PM Bug report #12409: Creation of new mapsets does not work anymore
- Will you backport this?
-
- I do not know these projections at all, but I wonder it your fix by fiddling with the qpj files does really have any ...
-
- Thanks for the information.
Yes, indeed, it is possible to manually correct the files projections by one or other of... -
- I'm seeing some strange behavior on a shapefile I'm working with. If I draw a polygon in just the right spot and then...
-
08:39 AM Bug report #13255 (Closed): Some WFS data not displayed from LuciadLightspeed WFS server
- The WFS data offered by the OGC-compliant LuciadLightspeed WFS server (1.0.0 & 1.1.0) cannot be loaded in QGIS, while...
-
07:14 AM Bug report #13254 (Closed): Failed to import OSM data: XML error
- I'm trying to open an OSM file exported by Overpass API. When I try to import the topology from XML it says me "Faile...
-
-
- solved in ab7c0bff8719a756da06ea193d3545d1a7e418a3
-
- Fixed in changeset commit:"ab7c0bff8719a756da06ea193d3545d1a7e418a3".
-
- see https://github.com/qgis/QGIS/pull/2235 and https://github.com/qgis/QGIS/pull/2234
-
04:50 AM Feature request #11505: One to many / many to one joins
- I also disagree with closing this. Integration with feature form doesn't really cut it in the case that somebody need...
-
- In this case, towgs84 paramters are not taken form GDAL (which still shows different values), but from this patch: ht...
-
04:15 AM Bug report #13078 (Reopened): Size of legend items
- Hi Vincent, the problem is solved in the mapwindow. But in print composer, the problem exist.
-
- Hi Vincent, the problem is solved in the mapwindow. But in print composer, the problem exist.
2015-08-23
-
- The way to test with GDAL is to use gdalsrsinfo:
gdalsrsinfo epsg:2950 -o proj4
'+proj=tmerc +lat_0=0 +lon_0=-73.5 +... -
- Right, we did not talk about the same tool.
I agree that there should be an option to leave the ignored attributes t... -
- :)))))))))
-
- Implemented in master
-
- Implemented in master
-
- Implemented in master
-
- Implemented in master
-
- Implemented in master
-
- Implemented in master
-
- For diagram overlays, scale-based visibility is always active/applied even if the option is set to off.
Also available in: Atom