Activity

From 2014-04-22 to 2014-05-21

2014-05-21

11:22 PM Bug report #5896: Identify of WMS layers does not work
Giovanni Manghi wrote:
> testes were made adding the layers in a projected CRS (3763, is the one defined for the laye...
Radim Blazek
06:08 PM Bug report #10321 (Closed): Change in behavior of attribute forms
I upgraded qgis-dev in OSGEO4W a few days ago to QGIS code revision commit:2ff79d3.
I have noticed a change in the b...
Thomas McAdam
04:22 PM Feature request #10317 (Closed): Clone\\duplicate layer as memory layer
duplicate of #10318 Jürgen Fischer
04:22 PM Feature request #10317 (Closed): Clone\\duplicate layer as memory layer
duplicate of #10318 Jürgen Fischer
03:36 AM Feature request #10317 (Closed): Clone\\duplicate layer as memory layer
As a cartographer I love the data defined labels, but sometimes one can't or shouldn't add new fields to the layer.
...
Alexandre Neto
11:20 AM Feature request #1539 (Closed): Alphabetize "Files of type" drop down options
yes, this has been updated in master a few days ago. Etienne Tourigny
11:20 AM Feature request #1539 (Closed): Alphabetize "Files of type" drop down options
yes, this has been updated in master a few days ago. Etienne Tourigny
11:20 AM Feature request #1539 (Closed): Alphabetize "Files of type" drop down options
yes, this has been updated in master a few days ago. Etienne Tourigny
10:59 AM Feature request #1539: Alphabetize "Files of type" drop down options
I think this was implemented in current master, if I am correct maybe time to close this ticket Antonio Locandro
10:47 AM Feature request #10320 (Feedback): WGS84 Ellipsoid Calculations
I posted this in the developer mailing list but adding it here also
Hi all, in this document http://www.faa.gov/docu...
Antonio Locandro
09:11 AM Bug report #3133 (Reopened): Menus too large for small screens
I think at least 1024x768 should be supported. Paolo Cavallini
09:11 AM Bug report #3133 (Reopened): Menus too large for small screens
I think at least 1024x768 should be supported. Paolo Cavallini
09:11 AM Bug report #3133 (Reopened): Menus too large for small screens
I think at least 1024x768 should be supported. Paolo Cavallini
08:01 AM Bug report #3133 (Closed): Menus too large for small screens
Not using QGIS on a netbook anymore, and frankly not sure it should be supported. Bill Morris
08:01 AM Bug report #3133 (Closed): Menus too large for small screens
Not using QGIS on a netbook anymore, and frankly not sure it should be supported. Bill Morris
07:58 AM Bug report #8101: "Save as" on a large PostGIS point layer doesn't work
I've just run into the same error on a point file with 100 features and a single attribute column. Only 86 out of 100... Bill Morris
07:39 AM Feature request #10319 (Closed): Copy canvas content as image
Hi !
The "@save as image@" command from the mainwindow is great !
But what about a "@copy as image@" function ?
...
Olivier Dalang
06:28 AM Feature request #9886 (Closed): Implement per layer colour QtGraphicalEffects
Fixed in changeset commit:"af7af6c26a493192af4ee673928974c091aa1894". Nyall Dawson
05:04 AM Bug report #8885 (Reopened): Buttons (Ok, Cancel) disappear in "Apri Modulo" from Attribute Table
It seems this is not fixed. See comment here.
http://gis.stackexchange.com/questions/74640/buttons-ok-cancel-disappea...
Matthias Kuhn
04:25 AM Bug report #10306 (Closed): Identify WMS does not work with format feature (GML)
Fixed in changeset commit:"be318fe6b2a503f8c1db5be5495bfabc8c0069f8". Radim Blazek
03:44 AM Feature request #10318: Clone\\duplicate layer as memory layer
There is already the option to Paste selected features as a new Memory Layer in the Edit menu. Nathan Woodrow
03:42 AM Feature request #10318: Clone\\duplicate layer as memory layer
I forgot to mention that New Memory Layer is not an option since one would have to replicate all layer's fields, and ... Alexandre Neto
03:36 AM Feature request #10318 (Closed): Clone\\duplicate layer as memory layer
As a cartographer I love the data defined labels, but sometimes one can't or shouldn't add new fields to the layer.
...
Alexandre Neto
03:10 AM Feature request #10316 (Closed): Add a toggle to turn layer filtering on of
With the query builder you can create complex filtering of what features of a layer that are to be shown in the canva... magerlin -
02:52 AM Bug report #10128 (Closed): small bug in example script Extract_raster_values_to_shapefile.py and...
Fixed in commit:21da03e Salvatore Larosa
02:52 AM Bug report #10128 (Closed): small bug in example script Extract_raster_values_to_shapefile.py and...
Fixed in commit:21da03e Salvatore Larosa

2014-05-20

01:14 AM Feature request #10314: An option to tell Composer/Atlas to avoid put a label near the border
There's an option in the global label settings to prevent clipped labels at the edge of maps. I think this request is... Nyall Dawson
02:36 PM Feature request #10314 (Closed): An option to tell Composer/Atlas to avoid put a label near the b...
An useful enhancement for composer could be an option to avoid qgis put a label (every label from every layer in proj... aperi2007 -
12:40 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
do some test.
It is confirmed on last dev.
details of test in other ticket.
aperi2007 -
12:39 AM Bug report #9959: crash on 2.2 and master when loading a vector style with missing SVG
I do some check.
It do crash surely if I set the unavailable svg as a fill pattern and set to map-units.
It start w...
aperi2007 -
12:03 AM Bug report #10315 (Closed): The print from composer randomly lost the vertical step vertical
Hi,
we try to print in the composer a rendering filled with a vertical pattern.
Randoly , we notice the vtical ste...
aperi2007 -
11:37 PM Bug report #10175: OSGeo4w 2.2 build missing ECW support
This is not a qgis problem - hence I closed the ticket. QGIS 2.2 in OSGeo4W is built against GDAL 1.10. OSGeo4W m... Jürgen Fischer
04:27 PM Bug report #10175: OSGeo4w 2.2 build missing ECW support
Thank you. I have installed that msi but there is only gdal_ECW_JP2ECW.dll (no libecwj2.dll). Also gdal_ECW_JP2ECW.dl... Miroslav Umlauf
03:22 AM Bug report #10175: OSGeo4w 2.2 build missing ECW support
Miroslav Umlauf wrote:
> Does this link from QGIS FAQ helps as workaround before the whole problem will be solved? ht...
Giovanni Manghi
08:12 PM Feature request #4887 (Closed): save choice of "Item reference point" for composer items.
Yes, it looks like it can. Alister Hood
08:12 PM Feature request #4887 (Closed): save choice of "Item reference point" for composer items.
Yes, it looks like it can. Alister Hood
04:02 AM Feature request #4887 (Feedback): save choice of "Item reference point" for composer items.
I can't replicate this - can this be closed now? Nyall Dawson
07:49 PM Bug report #10269: Attribute table edit crash
I got an error again on my larger project while moving one of the points. James Harvey
06:50 PM Bug report #10269: Attribute table edit crash
I tried again recently with the SHP file without anything else in the project and it was ok with updating. I did a se... James Harvey
06:19 PM Feature request #10313: List of available OGR drivers
sure, but don't expect this too soon in gdal stable Etienne Tourigny
11:43 AM Feature request #10313: List of available OGR drivers
Hi,
GDAL has a plan to unify the gdal and ogr.
So this could be unuseful.
http://lists.osgeo.org/pipermail/gdal-dev...
aperi2007 -
11:07 AM Feature request #10313 (Open): List of available OGR drivers
Under @Settings -> Options -> GDAL@ is a list of all installed raster drivers, which can be unchecked if necessary.
...
Andre Joost
05:24 PM Bug report #9139 (Closed): Relations do not work on MSSQL layers
Fixed in changeset commit:"9e67d7a6340616b7ab8719f621d54bf3d0bf02a3". Anonymous
02:46 PM Bug report #9139: Relations do not work on MSSQL layers
I will have a look into this. Nathan Woodrow
01:51 PM Feature request #10310: open project on launch **relative path** option
matteo ghetta wrote:
> I don't think I'm mixing the paths.
> If I want to "export" the directories created by the --...
Jürgen Fischer
05:05 AM Feature request #10310: open project on launch **relative path** option
I don't think I'm mixing the paths.
If I want to "export" the directories created by the --configpath option to anth...
matteo ghetta
03:34 AM Feature request #10310: open project on launch **relative path** option
> The chance to open QGIS with a specific project is very handful. But using the --configpath option to store all the... Jürgen Fischer
03:04 AM Feature request #10310 (Closed): open project on launch **relative path** option
The chance to open QGIS with a specific project is very handful. But using the --configpath option to store all the c... matteo ghetta
01:48 PM Bug report #5873: Vector Grid UI is inscrutable
I would add one more issue in Vector grid UI: Too few decimal points (4) reserved for giving the grid interval when u... Jukka Rahkonen
11:19 AM Bug report #10309: On-the-fly projection of EPSG 4326 World Map gives weird results with specific...
Works for me on Windows 7 with QGIS 2.2 standalone and latest QGIS-dev. Andre Joost
02:02 AM Bug report #10309: On-the-fly projection of EPSG 4326 World Map gives weird results with specific...
Some additional info on package versions on Debian testing:
gdal: 1.10.1+dfsg-5+b1
proj: 4.8.0-2
mlennert -
10:35 AM Bug report #10234 (Feedback): Difficult to edit nodes of polygons close together
Patrick Dunford wrote:
> Uh???
the project you attached is missing two layers that are probably necessary to unders...
Giovanni Manghi
10:35 AM Bug report #10234 (Feedback): Difficult to edit nodes of polygons close together
Patrick Dunford wrote:
> Uh???
the project you attached is missing two layers that are probably necessary to unders...
Giovanni Manghi
06:57 AM Bug report #10234: Difficult to edit nodes of polygons close together
The photo that was supposed to accompany the last submission. Patrick Dunford
06:56 AM Bug report #10234: Difficult to edit nodes of polygons close together
Uh??? Well here is another illustration. I have used the selection tool to select the polygon which is filled with re... Patrick Dunford
10:25 AM Bug report #5896: Identify of WMS layers does not work
Etienne Tourigny wrote:
> Giovani - can you please test that the identify tool plugin works with wms rasters?
it is ...
Giovanni Manghi
10:20 AM Bug report #5896: Identify of WMS layers does not work
Giovani - can you please test that the identify tool plugin works with wms rasters? Etienne Tourigny
10:05 AM Bug report #5896: Identify of WMS layers does not work
testes were made adding the layers in a projected CRS (3763, is the one defined for the layers) and then reprojecting... Giovanni Manghi
10:23 AM Bug report #4051 (Open): Cannot display SpatiaLite views based on tables with spatial index
Giovanni Manghi
10:23 AM Bug report #4051: Cannot display SpatiaLite views based on tables with spatial index
Can someone change this back to "open" please? Anita Graser
06:28 AM Bug report #4051: Cannot display SpatiaLite views based on tables with spatial index
I am having the same problem in QGIS master. Spatial view are not shown if the parent table(s) have a spatial index. ... pvanbosgeo -
05:38 AM Feature request #10312 (Open): Legend/Layer tree should show active rules used for rendering
Hi all!
This issue concerns the situation of rendering a layer with rule-based rendering so, that the map scale affe...
Hannes Keski-Kiikoinen
05:25 AM Bug report #10265: Avoid intersections fails in many cases
I agree. It is annoying that the "avoid intersection" rule cannot be enforced when modifying features after they have... Andreas Neumann
05:15 AM Feature request #10311 (Open): freeze columns in the attribute table
It would be useful to have the option to freeze the column/s in the attribute table. So it would be possible to scrol... matteo ghetta

2014-05-19

01:59 AM Bug report #10309 (Closed): On-the-fly projection of EPSG 4326 World Map gives weird results with...
* Download Natural Earth 1:110m Admin 0 - Countries file: http://www.naturalearthdata.com/http//www.naturalearthdata.... mlennert -
01:55 AM Bug report #9671 (Open): SAGA and GRASS: "missing dependency" error when logged using "Windows ne...
Giovanni Manghi
01:54 AM Bug report #9671: SAGA and GRASS: "missing dependency" error when logged using "Windows network u...
Ok, the problem is definitely caused by Windows network user profiles. I asked two other people to install QGIS and t... Miroslav Umlauf
01:52 AM Feature request #10308 (Closed): Identify Tool - add "Select Feature" to context menu
Fixed in changeset commit:"45cd8953d93062a3b4c331040abf8e521c8e1c53". Jürgen Fischer
12:58 AM Feature request #10308 (Closed): Identify Tool - add "Select Feature" to context menu
hello,
it would be helpful if you could to select objects/features with the identify tool (screenshot).
* the selec...
Jan Lippmann
01:12 AM Bug report #10175: OSGeo4w 2.2 build missing ECW support
Does this link from QGIS FAQ helps as workaround before the whole problem will be solved? http://www.faunalia.com/con... Miroslav Umlauf
12:52 AM Feature request #10307 (Open): cmake find-python machinery cannot find python on Debian with Mult...
Running Debian Testing with Multiarch option (eg needed for Skype....)
https://wiki.debian.org/Multiarch/HOWTO
This ...
Richard Duivenvoorde
10:43 PM Bug report #9511 (Closed): Layer MSSQL date field type become QSTRING
Fixed in changeset commit:"978086badc342cba03e59e8b4191b35ee7cdd6ad". Anonymous
06:11 PM Feature request #8711 (Closed): Please add decent North arrows
Fixed in changeset commit:"06c0bd2be11858965e887d7a1d4aa8d3d03982c7". Nathan Woodrow
11:57 AM Bug report #10306 (Closed): Identify WMS does not work with format feature (GML)
Identify tool does not work with format feature on layer rt_ambamm.idcomuni.rt.poly from WMS server http://www502.reg... Radim Blazek
10:54 AM Bug report #5896 (Feedback): Identify of WMS layers does not work
I tested rt_ambamm.idcomuni.rt.poly with EPSG: 4326, 3857, 3003, 25832, 32632, 4326 reprojected to 3857 and 3857 repr... Radim Blazek
10:11 AM Bug report #9579: wrong behavior of svg symbol with data defined properties
There were two problems with data defined anchor with SVG and ellipse symbol layers:
* data defined values were igno...
Radim Blazek
10:00 AM Bug report #9579 (Closed): wrong behavior of svg symbol with data defined properties
Fixed in changeset commit:"f4705703f60e5c1ac37bf49c49f0bcdae24a73e9". Radim Blazek
08:37 AM Feature request #5963: too much decimals in graduated style classification
thx! Regis Haubourg
07:52 AM Bug report #8980 (Rejected): svg fill issue: lines not rendered correctly
Radim Blazek
07:41 AM Feature request #10305 (Closed): show feature coordinate in identify tool result
The Identify Feature result list shows the Click coordinate (as in #810).
It would be nice to also show the coordina...
Johannes Kroeger
06:54 AM Bug report #10304 (Closed): IOError: Errno 9 Bad file descriptor
Hi,
I'm getting this error with some SAGA tools. The first time I try to run the tool, it shows this error, but tryi...
Pedro Venâncio
05:50 AM Bug report #8695: Road graph plugin: no line saved in temp layer
Still the same problem as described in my QGIS 2.0 installation on 64-bit Windows 7: Shortest path calculation works,... bnotter -
05:40 AM Bug report #9959: crash on 2.2 and master when loading a vector style with missing SVG
aperi2007 - wrote:
> is this the same of #10153?
it seems so.
Giovanni Manghi

2014-05-18

12:31 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
is this the same of #9959?
aperi2007 -
12:31 AM Bug report #9959: crash on 2.2 and master when loading a vector style with missing SVG
is this the same of #10153?
aperi2007 -
12:11 AM Feature request #5963: too much decimals in graduated style classification
Can anyone raise the priority to high. I think that QGis is become a real professional tool for mapping now. Also, th... Regis Haubourg
10:47 PM Bug report #10303 (Closed): QgsFieldExpressionWidget grows too wide with long expressions
The new QgsFieldExpressionWidget can grow very wide when using long expressions - this causes dialogs like the data d... Nyall Dawson
02:18 PM Feature request #7390 (Closed): print composer's overview frame feature selection setting should ...
I'm going to close this report, since #10299 is a feature request for multiple overviews per map. This is the way I p... Nyall Dawson
02:18 PM Feature request #7390 (Closed): print composer's overview frame feature selection setting should ...
I'm going to close this report, since #10299 is a feature request for multiple overviews per map. This is the way I p... Nyall Dawson
08:40 AM Feature request #6893: GRASS r.null
Pedro Venâncio wrote:
> Hi Markus,
>
> But Processing seems to request always an output parameter. How can we solve ...
Giovanni Manghi
08:32 AM Feature request #6893: GRASS r.null
Hi Markus,
But Processing seems to request always an output parameter. How can we solve this and add this two import...
Pedro Venâncio
07:43 AM Feature request #9938 (Closed): Add a filter for "New" plugins to plugins website
Moved to #10302 as it's related to the plugins website rather than to QGIS Desktop. Borys Jurgiel
07:43 AM Feature request #9938 (Closed): Add a filter for "New" plugins to plugins website
Moved to #10302 as it's related to the plugins website rather than to QGIS Desktop. Borys Jurgiel
07:36 AM Feature request #9726 (Closed): allow choose inputs from project when usign tools in batch mode
Giovanni Manghi
07:35 AM Bug report #10291 (Closed): ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DX...
Giovanni Manghi
03:57 AM Bug report #10291: ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DXF" to "DX...
will be fixed with
https://github.com/qgis/QGIS/pull/1365
Giovanni Manghi
03:57 AM Bug report #10291: ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DXF" to "DX...
will be fixed with
https://github.com/qgis/QGIS/pull/1365
Giovanni Manghi
03:57 AM Bug report #10291: ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DXF" to "DX...
will be fixed with
https://github.com/qgis/QGIS/pull/1365
Giovanni Manghi
06:59 AM Feature request #10301 (Open): [composer] Support formatting for grid coordinates
A lot of maps show UTM coordinate labels in a 'standardized'/'conventional' scheme where the first two digits and the... Tom Grundy
06:44 AM Feature request #10300 (Closed): composer: show annotations / canvas items above composer grid
For a map with a lot of annotations, the behavior of the composer map item grid in 2.2 being drawn on top of the anno... Tom Grundy
06:29 AM Bug report #8756 (Closed): colour expressions return rgb(a) instead of hex values
Fixed in changeset commit:"3499a390d643c454b8b2eaca4d63979fe7005263". Anonymous
06:26 AM Feature request #10299 (Closed): allow multiple overviews in composer
For a large map with multiple inset maps, it would be nice to draw the overview of each inset on the main large map. ... Tom Grundy
06:08 AM Bug report #9785 (Closed): Recent expressions missing in field calculator
Fixed in changeset commit:"b66ee237ef45d66d1481d415798870d775791af8". Anonymous
05:52 AM Feature request #10005 (Closed): Drag and drop .qlr files
Fixed in changeset commit:"218da5a53898831fbe1011c2bed34af6d14c0e45". Anonymous
04:11 AM Bug report #10298 (Closed): Unchecking "Use Proxy Access to Web" does not take effect until QGIS ...
When I have the proxy access option set via the settings dialog, unckecking "Use Proxy Access to Web" does not take e... Jeremy Palmer
03:56 AM Bug report #10296: Impossible to start any processing tool
Vincent chourmo wrote:
> Will there be an update to the processing plug-in for 2.2 ?
processing is updated (when an ...
Giovanni Manghi

2014-05-17

11:33 PM Feature request #5216: Modify default options in QGIS
Default composer font is configurable in QGIS 2.2 - partly implements this request. Nyall Dawson
01:49 PM Bug report #10296: Impossible to start any processing tool
Will there be an update to the processing plug-in for 2.2 ? Vincent chourmo
01:35 PM Bug report #10296 (Closed): Impossible to start any processing tool
it was fixed in master recently. Here is the commit:
#b1570fb20ae7a7ef345409c47d8f2cbf165720d8
Victor Olaya
12:40 PM Bug report #10296 (Closed): Impossible to start any processing tool
When I start a processing tool (script or provider) I have this error message
Uncaught error while executing algorit...
Vincent chourmo
12:50 PM Feature request #10297 (Open): [network-analysis] add a full vector layer import in graph
A graph is often represented directly in a vector layer by adding special fields : to_node, from_node, direction. to_... Vincent chourmo
09:57 AM Feature request #10295 (Open): Add auto increment field for non database formats
It would be usefull to add a QGIS Field edittype called "Serial" and implementing auto-incrementation for non-databas... Paolo Cavallini

2014-05-16

10:50 PM Bug report #9579 (Reopened): wrong behavior of svg symbol with data defined properties
Some test that we do yesterday show that the "Point Of Vertical Anchor" don't work roperly in the data-definition.
I ...
aperi2007 -
10:50 PM Bug report #9579 (Reopened): wrong behavior of svg symbol with data defined properties
Some test that we do yesterday show that the "Point Of Vertical Anchor" don't work roperly in the data-definition.
I ...
aperi2007 -
01:36 PM Bug report #8760: Custom Form from .ui File crashes QGIS on Ubuntu
Following Alexandre report on the dev mailing list [subject: Users Manual Form annotations challenge], I've created a... Jorge Rocha
12:40 PM Bug report #5896: Identify of WMS layers does not work
You can use this public server.
http://www502.regione.toscana.it/wmsraster/com.rt.wms.RTmap/wms?map=wmsambamm
Use t...
aperi2007 -
11:42 AM Bug report #10137 (Feedback): Processing stripping out +towgs params
Can you please check again, it does not seems to happen anymore. Giovanni Manghi
08:52 AM Feature request #5963: too much decimals in graduated style classification
Agreed,
Also please notice what happens to 44.1200 it is on two classes, really it should go
- 44.1200
44.1201 -
...
Antonio Locandro
08:17 AM Feature request #10292 (Open): Mode Defined Interval
Add a mode in which the interval size would be set manually
Use case: You want the interval size to be exactly 10
Y...
Antonio Locandro
07:40 AM Bug report #10279: Join attributes by location - field shifted
Fields values seems shifted. Giovanni Manghi
07:40 AM Bug report #10279: Join attributes by location - field shifted
Fields values seems shifted. Giovanni Manghi
07:40 AM Bug report #10279: Join attributes by location - field shifted
Fields values seems shifted. Giovanni Manghi
07:40 AM Bug report #10279: Join attributes by location - field shifted
Fields values seems shifted. Giovanni Manghi
07:17 AM Bug report #10291: ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DXF" to "DX...
Here is a readable version of the diff output... Håvard Tveite
07:14 AM Bug report #10291 (Closed): ogr2ogr dxf export does not work in Processing - Changing "AutoCAD DX...
In the Processing toolbox, under GDAL/OGR-> OGR Conversion-> Convert format,
it does not seem to be possible to expor...
Håvard Tveite
06:48 AM Feature request #10290 (Closed): Forms: Multi-edit mode
There should be a multi-edit form mode. When activated, one can edit multiple fields at once and the edited fields wo... Andreas Neumann
06:34 AM Bug report #10289 (Closed): Legend Symbol Settings are not read
Since the new classes, the legend symbol settings are not read.
All these settings are 0.0 from qgsWmsProjectParser:...
René-Luc ReLuc
06:26 AM Feature request #10288 (Open): Introduce a menu into attribute forms
At the top of an attribute form one should introduce a menu that lists:
* actions
* metadata and derived information...
Andreas Neumann
06:23 AM Bug report #10186: Shapefiles, big integer fields, values are set negative when too big
test Marcel Proust
06:15 AM Feature request #10287 (Open): Database relations: ability to define special cases for 1:1 and ob...
In 1:1 mode the UI should behave as follows:
* only the form will be displayed (no table, no feature list)
* the plu...
Andreas Neumann
06:15 AM Feature request #10282: Action widget in drag and drop form
Should apply to any form, not only drag and drop Matthias Kuhn
03:00 AM Feature request #10282 (Open): Action widget in drag and drop form
It should be possible to include a button into a drag and drop form that starts an action assigned to the layer. Andreas Neumann
03:18 AM Feature request #10285 (Open): Nested forms with database relations: ability to decide whether em...
For embedded forms/tables with database relations the relations widget should allow some configurable options:
* dis...
Andreas Neumann
03:13 AM Feature request #10284: Database relations: for 1:1 relations it should be possible to mix the wi...
mast table should be master table Andreas Neumann
03:12 AM Feature request #10284 (Open): Database relations: for 1:1 relations it should be possible to mix...
For more complex applications there are often 1:1 relations. In such a case it should be possible to mix the widgets ... Andreas Neumann
03:07 AM Feature request #10283 (Open): Geometry widget
A new "geometry widget" type should be added. The idea is to have a widget in a drag and drop form, autogenerated for... Andreas Neumann
02:58 AM Bug report #10281 (Closed): Database relations: after starting edit mode, selected record in embe...
Situation: database relation defined, form embedded. When starting to edit the embedded form, the selected record is ... Andreas Neumann

2014-05-15

11:26 PM Bug report #10280 (Closed): [PATCH] WMS GetLegendGraphics should return only the symbol with {LAY...
Hi,
as subject, WMS GetLegendGraphics should return only the symbol if LAYERFONTSIZE and ITEMFONTSIZE are 0.
Actua...
luca76 -
11:00 PM Bug report #10279 (Closed): Join attributes by location - field shifted
After joining the attached point and polygon shps the calculated field sums are not correct (or not written to the co... Tony Wicker
08:55 PM Bug report #10128: small bug in example script Extract_raster_values_to_shapefile.py and Extract_...
Corrected version is supplied, Sven have you made the pull request on Github or should someone else do it? Antonio Locandro
07:46 PM Feature request #10260: Processing - Geodetic Distance
Update: I can find the distance using advanced field calculator, but it would be nice if using $length would return m... Antonio Locandro
11:04 AM Bug report #10268: Import CSV. spatial coordinates not recognised
John Pilkington wrote:
> I've checked the separator; also made a new one-line .csv file using Notepad with exactly th...
Giovanni Manghi
08:38 AM Bug report #10268: Import CSV. spatial coordinates not recognised
I've checked the separator; also made a new one-line .csv file using Notepad with exactly the same result. I've tried... John Pilkington
05:32 AM Bug report #10268 (Feedback): Import CSV. spatial coordinates not recognised
the file is ok and so is qgis that imports it without issues, check if the parameters (like the separator) are ok. Giovanni Manghi
10:19 AM Bug report #10269: Attribute table edit crash
... Tobias Schneider
10:13 AM Bug report #10269: Attribute table edit crash
Tobias Sch wrote:
> @Giovanni - Just loading the file in Ubuntu crashes the program (each time). Might only happen in...
Giovanni Manghi
10:10 AM Bug report #10269: Attribute table edit crash
@Giovanni - Just loading the file in Ubuntu crashes the program (each time). Might only happen in 14.04, 64 bit. Migh... Tobias Schneider
06:03 AM Bug report #10269 (Feedback): Attribute table edit crash
for the original reporter: please attach sample data and describe exact steps
for Tobias Sch: I cannot replicate any...
Giovanni Manghi
06:03 AM Bug report #10269 (Feedback): Attribute table edit crash
for the original reporter: please attach sample data and describe exact steps
for Tobias Sch: I cannot replicate any...
Giovanni Manghi
06:03 AM Bug report #10269 (Feedback): Attribute table edit crash
for the original reporter: please attach sample data and describe exact steps
for Tobias Sch: I cannot replicate any...
Giovanni Manghi
03:34 AM Bug report #10269: Attribute table edit crash
I can confirm this for the current build. Does QGIS-daily currently corrupt shapefiles? See attachment for a file tha... Tobias Schneider
08:28 AM Bug report #8824: Exported image from OpenLayer plugin looks shifted no matter of format but look...
Mikhail Tchernychev wrote:
> 1. Use QGIS OpenLayers or other tools to capture pierce of satellite imagery
> you need...
Andre Joost
08:07 AM Bug report #8417 (Closed): incorrect value loaded from netcdf file with scale factor
Merged commit 07c57585c1fe10143a3529dfdeddcfa358c8f692
#07c57585c1fe10143a3529dfdeddcfa358c8f692
Pull request 1252 h...
René-Luc ReLuc
08:07 AM Bug report #8417 (Closed): incorrect value loaded from netcdf file with scale factor
Merged commit 07c57585c1fe10143a3529dfdeddcfa358c8f692
#07c57585c1fe10143a3529dfdeddcfa358c8f692
Pull request 1252 h...
René-Luc ReLuc
08:07 AM Bug report #8417 (Closed): incorrect value loaded from netcdf file with scale factor
Merged commit 07c57585c1fe10143a3529dfdeddcfa358c8f692
#07c57585c1fe10143a3529dfdeddcfa358c8f692
Pull request 1252 h...
René-Luc ReLuc
07:32 AM Bug report #10271: Crash when using SVG markers
It works fine under 2.0.1 Gary Sherman
04:12 AM Bug report #10271: Crash when using SVG markers
Hi Gary,
how the project behave in qgis 2.0.1?
Giovanni Manghi
05:58 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
yes, it seems that using large/complex polygons (like your one that is the result of a poligonization from raster) th... Giovanni Manghi
05:58 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
yes, it seems that using large/complex polygons (like your one that is the result of a poligonization from raster) th... Giovanni Manghi
05:58 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
yes, it seems that using large/complex polygons (like your one that is the result of a poligonization from raster) th... Giovanni Manghi
05:58 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
yes, it seems that using large/complex polygons (like your one that is the result of a poligonization from raster) th... Giovanni Manghi
05:58 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
yes, it seems that using large/complex polygons (like your one that is the result of a poligonization from raster) th... Giovanni Manghi
05:05 AM Feature request #10275: Copy SAGA documentation from RSAGA project
Thanks for the pointer. I have checked, and only 46 algs seem to be documented. Furthermore, the docs are in Latex, s... Paolo Cavallini
05:04 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I tried on Ubuntu 14.04 64bit. Works fine with the current daily build (2.3). Tobias Schneider
05:04 AM Feature request #10266: transportation network management
Vincent chourmo wrote:
> I've started a github repo with some processing script for transit and traffic analysis.
>
...
Giovanni Manghi
05:03 AM Bug report #10227: QGIS2.2 - SAGA Gridding shapefile with only one point
robert vech wrote:
> So I'm a QGIS user, not a SAGA user ... the tests were made to confirm the problem.
> Anyway, I ...
Giovanni Manghi
04:37 AM Bug report #10247: WMS performance degraded
So this may be related to multi threading (probably the biggest change in qgis 2.3). Tagging this as a regression mea... Giovanni Manghi
03:12 AM Bug report #10247: WMS performance degraded
I can also confirm the same thing for your WMS server. Using the same machines:
*QGIS 2.2: < 1 second (Very responsi...
Tobias Schneider
04:33 AM Bug report #10235 (Open): Bottommost layers in a legend group cannot be re-added
Now I can see it too and it is not a regression (at least it is the same down until 1.8). Giovanni Manghi
04:33 AM Bug report #10235 (Open): Bottommost layers in a legend group cannot be re-added
Now I can see it too and it is not a regression (at least it is the same down until 1.8). Giovanni Manghi
04:10 AM Bug report #10267 (Feedback): Data in attribute table changes after "joins"
Giovanni Manghi
04:00 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
For me, the issue importing CSV files on a Mac is that the importer doesn't support the default mac "record separator... mac joost
03:27 AM Bug report #10262: SVG not rendering properly in 1.8 and 2.2
The quality of the SVG-export should also be given highest priority. SVG maps are used very often on Wikipedia and th... Tobias Schneider

2014-05-14

01:56 AM Bug report #9335: Widgets: impossible to input a time
Should be fixed by https://github.com/qgis/QGIS/pull/1351 Denis Rouzaud
01:55 AM Feature request #10275 (Closed): Copy SAGA documentation from RSAGA project
The RSAGA project has pretty good documentation on some of the SAGA algorithms. Maybe this could be copied into Proce... asgerpetersen -
01:39 AM Bug report #10274: QgsFieldExpressionWidget should show expressions in italics
It does, but it's apparently overwritten by the OS.
!https://cloud.githubusercontent.com/assets/127259/2981824/698ec...
Denis Rouzaud
01:17 AM Bug report #10274 (Closed): QgsFieldExpressionWidget should show expressions in italics
It would be a nice touch if QgsFieldExpressionWidget showed the expression row in a different font style (eg italic),... Nyall Dawson
01:39 AM Bug report #10224: Loading Geopackage sample crashes QGIS on Debian (works on Ubuntu and Windows)
Seems to be fixed now in GDAL trunk and for version 1.11 http://trac.osgeo.org/gdal/ticket/5471#comment:1 Jukka Rahkonen
01:36 AM Bug report #10247: WMS performance degraded
It is hard to believe that it takes several seconds to update a WMS map if server is working OK. Could you try with a... Jukka Rahkonen
01:08 AM Bug report #10227 (Closed): QGIS2.2 - SAGA Gridding shapefile with only one point
So I'm a QGIS user, not a SAGA user ... the tests were made to confirm the problem.
Anyway, I made a test with the SA...
robert vech
01:06 AM Feature request #10273: Add support for multi-line strings in the composer' attribute table item
Relates to #8006. Nyall Dawson
12:38 AM Feature request #10273: Add support for multi-line strings in the composer' attribute table item
Vertical alignment of cell content should be configurable too. Mathieu Pellerin - nIRV
11:48 PM Feature request #10273 (Closed): Add support for multi-line strings in the composer' attribute ta...
Right now, the composer's attribute table doesn't take into account string cells that contains multiple lines (see at... Mathieu Pellerin - nIRV
12:43 AM Bug report #10235: Bottommost layers in a legend group cannot be re-added
Here a screencast of my issue (sorry for the interferences at the beginning):
http://ikgrai1.ethz.ch/ads_survey/vide...
Raimund Schnuerer
11:34 PM Feature request #10272: Test value input for expression builder
Maybe a box as in the query builder would be enough, with the option "Show first 10 results" and "Show all"? Paolo Cavallini
09:29 PM Feature request #10272 (Open): Test value input for expression builder
It would be nice to be able to provide test field values for the expression builder to test expressions before applyi... Nathan Woodrow
10:54 PM Feature request #10266: transportation network management
I've started a github repo with some processing script for transit and traffic analysis.
https://github.com/chourmo/...
Vincent chourmo
12:02 PM Feature request #10266 (Open): transportation network management
There was a QGIS plugin developed by a French company that allowed transportation networks management, but developmen... MRick -
10:00 PM Bug report #10271: Crash when using SVG markers
Make sure you have no other additional elements in the SVG symbols that are outside of the document area. Open them u... James Harvey
09:02 PM Bug report #10271 (Closed): Crash when using SVG markers
With a project containing a lot of SVG marker symbols, zooming and panning will cause QGIS 2.2 (and master) to crash ... Gary Sherman
08:06 PM Feature request #10270 (Open): Add tool for scale / transforming layers
Would be nice to have something more interactive and user friendly for scaling data sets from imported vector data. I... James Harvey
07:15 PM Feature request #2957 (Closed): Alignment in composer table widget
Fixed in changeset commit:"dc905accacb25ff0932a19d5146de8e0b0fd3d84". Nyall Dawson
07:15 PM Feature request #5942 (Closed): Composer attribute table column order
Fixed in changeset commit:"dc905accacb25ff0932a19d5146de8e0b0fd3d84". Nyall Dawson
06:31 PM Bug report #10236 (Closed): layer transparency 'no data value' checkbox setting is not preserved ...
fixed in changeset commit:061941e1195144c024e0c082a88c7d51674aa452
Etienne Tourigny
06:07 PM Bug report #10236: layer transparency 'no data value' checkbox setting is not preserved during sa...
Actually I am not sure if the no data value settings (and additional nodata value) should be saved in the project, bu... Etienne Tourigny
03:54 PM Bug report #10269 (Closed): Attribute table edit crash
I have a basic points shp file that has about 25 records in.
I have about 3 records with no x y locations that I am t...
James Harvey
03:45 PM Feature request #8844: PDF output option - text as text objects rather than paths
It would be nice to have the option to maybe set background layers to render but export the text as text objects on top. James Harvey
03:43 PM Bug report #10267: Data in attribute table changes after "joins"
What do you mean? When you join data it will update the attribute table with the new information. Nathan Woodrow
12:04 PM Bug report #10267 (Closed): Data in attribute table changes after "joins"
The issue happens when I attempt to join a shapefile and data table. When I add the layer, the attribute table seems ... Jeanine Johnson
01:28 PM Bug report #10268 (Closed): Import CSV. spatial coordinates not recognised
This morning I successfully loaded a .csv file with OS coordiantes in the X, Y columns; points displayed correctly. N... John Pilkington
08:01 AM Bug report #10265 (Closed): Avoid intersections fails in many cases
_avoid intersections_ does only work when digitizing new features. It does not work at all with existing features.
I...
Bernhard Ströbl
05:00 AM Bug report #10237: project loads layers not seen in legend
done here: [[http://osgeo-org.1560.x6.nabble.com/QGIS-saves-ghost-layers-in-projects-td5140210.html]]
Regis Haubourg
03:47 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Ok.
No, I can wait for the new version.
Hope it is fixed.
Thank you for the attention.
Barbara Duarte
03:33 AM Bug report #10263: Freeze using "Select By Location" (or the spatial query tool) for complex poly...
In general I think that the current build doesn't like selecting and deselecting polygons. I get a few freezes a day ... Tobias Schneider
02:01 AM Bug report #10263 (Open): Freeze using "Select By Location" (or the spatial query tool) for compl...
Using QGIS 2.2 (tested in current nightly build of 2.3). 32bit version (replicated issue in 64bit version).
QGIS ...
Neil Benny
02:07 AM Bug report #10264 (Closed): Geojson/Sqlite/Mbtiles extensions not correctly picked from file sele...
*New description:*
When an output extension is >5 chars the extension in the output is truncated (to 5 chars) and the...
Victor Olaya

2014-05-13

12:58 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Barbara Duarte wrote:
> Is there a way to use SAGA algorithms through Modeler?
If there is a bug this must be fixed....
Giovanni Manghi
11:58 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Is there a way to use SAGA algorithms through Modeler? Barbara Duarte
11:55 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
The issue seems to be that in the modeller the output (SAGA) raster is not defined, example:
Algorithm starting......
Giovanni Manghi
08:14 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Do you mean restart QGIS with "upgrade processing" after activate "Show also experimental plugins"?
I did what you s...
Barbara Duarte
07:55 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Go to Plugins -> Manage and Install plugins -> Settings -> activate "Show also experimental plugins"
Then, upgrade "...
Filipe Dias
07:48 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Yes, outside Modeler all SAGA algorithms works fine.
Inside Modeler, SAGA algorithms as Grids Sum, Grids Product and...
Barbara Duarte
07:45 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Do SAGA algorithms work outside of the Modeler? Filipe Dias
06:34 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
Thanks for check this.
So, SAGA algorithms, especially grids calculator, doesn't work in QGIS 2.2 right?
I have to ...
Barbara Duarte
06:30 AM Bug report #10238: SAGA algorithms doesn't work in Modeler QGIS 2.2
confirmed, had several issues this past day had to resort to GRASS algorithms instead Antonio Locandro
12:45 AM Bug report #10244 (Feedback): "Join Attributes Tables" returns wrong results if input layers have...
It is not clear what it the problematic tool and what the steps to replicate the issue. Please leave feedback. Cheers! Giovanni Manghi
12:37 AM Bug report #10236: layer transparency 'no data value' checkbox setting is not preserved during sa...
Confirmed on master/linux. Giovanni Manghi
12:37 AM Bug report #10236: layer transparency 'no data value' checkbox setting is not preserved during sa...
Confirmed on master/linux. Giovanni Manghi
12:37 AM Bug report #10236: layer transparency 'no data value' checkbox setting is not preserved during sa...
Confirmed on master/linux. Giovanni Manghi
12:37 AM Bug report #10236: layer transparency 'no data value' checkbox setting is not preserved during sa...
Confirmed on master/linux. Giovanni Manghi
12:33 AM Bug report #10262 (Feedback): SVG not rendering properly in 1.8 and 2.2
It renders fine on QGIS master (next 2.4). Giovanni Manghi
05:00 PM Bug report #10262 (Closed): SVG not rendering properly in 1.8 and 2.2
Some SVG symbols are not rendering properly in QGIS 1.8 and 2.2. They were created in Inkscape and render correctly t... Krischelle Love
12:34 PM Bug report #9972: Selecting other map items does not respond after a while
I can confirm that this happens to me frequently as well. It only seems to be an issue when opening pre-2.2 projects ... Andrew Carne
12:17 PM Bug report #10237: project loads layers not seen in legend
we have also seen many times this issue: it seems that when removing layers form a project then sometimes the layers ... Giovanni Manghi
12:13 PM Bug report #10235 (Feedback): Bottommost layers in a legend group cannot be re-added
if I understand well then I cannot confirm. A screencast would help eventually understand better the issue. Giovanni Manghi
11:41 AM Bug report #10227 (Feedback): QGIS2.2 - SAGA Gridding shapefile with only one point
robert vech wrote:
> So I did an other test.
the question is: does the native SAGA tool (command line or GUI) work o...
Giovanni Manghi
11:41 AM Bug report #10227 (Feedback): QGIS2.2 - SAGA Gridding shapefile with only one point
robert vech wrote:
> So I did an other test.
the question is: does the native SAGA tool (command line or GUI) work o...
Giovanni Manghi
11:39 AM Bug report #10239 (Closed): Selecting polygons triggers map reload
duplicate of #9676 Giovanni Manghi
11:39 AM Bug report #10239 (Closed): Selecting polygons triggers map reload
duplicate of #9676 Giovanni Manghi
03:53 AM Bug report #10239: Selecting polygons triggers map reload
This is related issue #10097 Tobias Schneider
11:37 AM Bug report #10240 (Feedback): qgis 2.2 wont open
does this happens on other machines? please try also the osgeo4w installer and/or do a clean install (uninstall any q... Giovanni Manghi
11:37 AM Bug report #10240 (Feedback): qgis 2.2 wont open
does this happens on other machines? please try also the osgeo4w installer and/or do a clean install (uninstall any q... Giovanni Manghi
06:38 AM Bug report #10240: qgis 2.2 wont open
Antonio Locandro wrote:
> Are you using the standalone application or OSGEO4W?
I'm using the standalone application,...
Elsa Mendes
06:32 AM Bug report #10240: qgis 2.2 wont open
Are you using the standalone application or OSGEO4W? Antonio Locandro
10:11 AM Feature request #10261 (Open): Download required dependencies
Some plugins like contour plugin need matplotlib to work, would it be a good idea that QGIS tried to download the req... Antonio Locandro
10:01 AM Feature request #10260 (Closed): Processing - Geodetic Distance
If I use the field calculator in Attribute of layer and Enable on the fly CRS transformation for project if I use $le... Antonio Locandro
08:57 AM Bug report #10259 (Rejected): processing - Model text doesn't honor Model GUI
I made a model, saved it and then decided to delete several stuff, saved it again and I see a lot of leftover junk
N...
Antonio Locandro
08:27 AM Bug report #9867: Advanced Python field calculator needs documentation
Hi All, I spent almost a week wondering why things didn't work.
Here is my point of view, really processing should u...
Antonio Locandro
08:20 AM Bug report #10198 (Closed): mapserver does not update when project file changes
Fixed in changeset commit:"436973dc033b4d2324be2f20310a5b37a96d3c4d". Marco Hugentobler
08:05 AM Feature request #10246: One to many relation: add child table also to custom forms
I meant the redesign.
But it counts for the documentation as well. Although I think we should wait with the document...
Matthias Kuhn
07:28 AM Feature request #10246: One to many relation: add child table also to custom forms
You mean the lead on development or documentation? Paolo Cavallini
07:23 AM Feature request #10246: One to many relation: add child table also to custom forms
Not sure about this...
But I assume it will have a better visibility once the redesign of the fields tab is done. Wo...
Matthias Kuhn
05:42 AM Feature request #10246: One to many relation: add child table also to custom forms
Brilliant, thanks - sorry for the noise.
Is this added to the manual?
Paolo Cavallini
05:31 AM Feature request #10246 (Closed): One to many relation: add child table also to custom forms
That is already possible. Just drag the relation into the designer tree. Matthias Kuhn
05:31 AM Feature request #10246 (Closed): One to many relation: add child table also to custom forms
That is already possible. Just drag the relation into the designer tree. Matthias Kuhn
02:35 AM Feature request #10246 (Closed): One to many relation: add child table also to custom forms
Currently, the child table is displayed only when using autogenerated forms. It would be very good to have the same a... Paolo Cavallini
07:57 AM Feature request #10254 (Open): Processing - Grid and Guides similar to Composer
It would be nice if we could align and snap to guides and grids in composer similar to what can be done in DTP or Vis... Antonio Locandro
07:55 AM Feature request #10253 (Closed): Processing - Alias in addition to name of geoprocessing algorithm
It would be useful if modeler showed additionally to the geoprocessing algorithm name an alias so users can distingui... Antonio Locandro
07:47 AM Feature request #10251: Processing - Order Model saves values
This is another sample
VALUE:HARDCODEDPARAMVALUE_FIELD_TYPE_1===1
VALUE:HARDCODEDPARAMVALUE_FIELD_PRECISION_2===2
VA...
Antonio Locandro
07:38 AM Feature request #10251 (Rejected): Processing - Order Model saves values
This is how model saves the order of values
PARAMETER:ParameterVector|VECTORLAYER_INPUTROUTEVECTOR|input_route_vecto...
Antonio Locandro
07:28 AM Bug report #10104: new identification mode selection not working as expected
issues as of today:
- if dock is hidden, it's put on top every time you use the tool
- identify a feature, then use a...
Denis Rouzaud
06:47 AM Bug report #10234: Difficult to edit nodes of polygons close together
Sorry, I don't see the red square but I am not able to confirm what you report, to edit nodes and select you have to ... Antonio Locandro
04:06 AM Bug report #10234: Difficult to edit nodes of polygons close together
And another thing, I want someone to tell me what is happening here because this is incredibly frustrating as well...... Patrick Dunford
05:37 AM Bug report #7679: DBManager does not release PostGIS connections
Thanks Paolo, done in https://github.com/qgis/QGIS/pull/1348 Ivan Mincik
05:06 AM Feature request #10250 (Closed): One to many relation: child table shown where inappropriate
In the tab showing the parent form, also the child table is shown (twice in my case). This is confusing, and I do not... Paolo Cavallini
05:04 AM Feature request #10249 (Open): One to many relation: do not allow changing the FK
During data entry from the parent table, the user is allowed to change the FK id. This is handy on the child table fo... Paolo Cavallini
05:01 AM Feature request #10248 (Closed): One to many relation: allow inserting parent and child in the sa...
In autogenerated forms, both parent and child tables are displayed, and data can be inserted in both. However, this i... Paolo Cavallini
04:44 AM Bug report #10097: Activating or deactivating a layer makes QGIS refresh WMS layers
It also happens when turning editing of a layer on and off. Tobias Schneider
03:53 AM Bug report #10097: Activating or deactivating a layer makes QGIS refresh WMS layers
This is a related issue: #10239 Tobias Schneider
04:01 AM Bug report #10247 (Closed): WMS performance degraded
I checked this with two computer on the same Internet connection:
I moved the view with the same WMS layer activated...
Tobias Schneider
03:33 AM Bug report #10175: OSGeo4w 2.2 build missing ECW support
See also http://trac.osgeo.org/osgeo4w/ticket/417 Jürgen Fischer
02:31 AM Bug report #10245 (Closed): Defining custom CRS in QGIS 2.2
With the precious feedback from Andre Joost, @proj4@ does not support the _geocent_ projection.... Jorge Rocha
02:31 AM Bug report #10245 (Closed): Defining custom CRS in QGIS 2.2
With the precious feedback from Andre Joost, @proj4@ does not support the _geocent_ projection.... Jorge Rocha
02:31 AM Bug report #10245 (Closed): Defining custom CRS in QGIS 2.2
With the precious feedback from Andre Joost, @proj4@ does not support the _geocent_ projection.... Jorge Rocha

2014-05-12

03:37 PM Bug report #10245 (Closed): Defining custom CRS in QGIS 2.2
For some reason, defining a new CRS is not working. The following error is reported: *The proj4 definition of 'name' ... Jorge Rocha
03:36 PM Bug report #10244 (Closed): "Join Attributes Tables" returns wrong results if input layers have a...
Ok so I join a polygon to a CSV, once I opened the output layer the column names are Ok but the values aren't since i... Antonio Locandro
02:54 PM Feature request #10242 (Closed): Join Attribute Table algorithm: add support to join geometryless...
Is there a way to be able to use CSV files as provider, currently it only accepts vector layers, I couldn't find a wa... Antonio Locandro
12:54 PM Bug report #9818: Crash when launching globe
Thanks Jorge, The solution was the installation of openscenegraph-plugin-osgearth package, I tested with QGIS 2.3 on ... Samuel Fernando Mesa Giraldo
11:26 AM Bug report #10240 (Closed): qgis 2.2 wont open
I´ve installed qgis 2.2 (64, windows 7 sp1) and it doesn't open, it stops when trying to configure the graphic user i... Elsa Mendes
10:36 AM Bug report #9579: wrong behavior of svg symbol with data defined properties
The same or similar problem was also with simple marker and ellipse. Symbol layers were simply ignoring data defined ... Radim Blazek
10:32 AM Bug report #9579 (Closed): wrong behavior of svg symbol with data defined properties
Fixed in changeset commit:"1ed94d01f7c3b692e753d95b08bcc205b7169cc9". Radim Blazek
09:45 AM Bug report #10239 (Closed): Selecting polygons triggers map reload
In QGIS 2.3.0-Master-daily-build, selecting polygons in a PostGIS layer triggers a map reload. This makes selecting a... Tobias Schneider
09:08 AM Bug report #10238 (Closed): SAGA algorithms doesn't work in Modeler QGIS 2.2
I am using Modeler in QGIS 2.2 and it gives me an error when I use SAGA algorithms. The error is:
Oooops! The follow...
Barbara Duarte
08:31 AM Bug report #10237: project loads layers not seen in legend
attached qgs Regis Haubourg
08:21 AM Bug report #10237 (Closed): project loads layers not seen in legend
Hi,
a user here produces qgs with more map layers than really existing in legend tree (24 in legend, with 59 maplay...
Regis Haubourg
08:15 AM Bug report #10224: Loading Geopackage sample crashes QGIS on Debian (works on Ubuntu and Windows)
confirmed Windows QGIS code revision commit:afc2e05 Antonio Locandro
07:56 AM Feature request #8711: Please add decent North arrows
Thank you for you input Antonio and Asier!
Antonio, if you haven't created a pull request yet, please do so and add ...
Anita Graser
07:18 AM Bug report #10236 (Closed): layer transparency 'no data value' checkbox setting is not preserved ...
for a geoiff (and probably other raster types) the Layer Properties -> Transparency -> No Data Value checkbox setting... Tom Grundy
07:06 AM Bug report #10227: QGIS2.2 - SAGA Gridding shapefile with only one point
So I did an other test.
I used 3 shapefiles:
- point1.shp a single-point shapefile --> rasterization doesn't work
-...
robert vech
05:23 AM Bug report #10181 (Closed): Graduated Style shows also non numeric columns
Fixed in changeset commit:"09a9a6171ac26eaaa1705cd65ed72435d35f54d7". Denis Rouzaud
03:50 AM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Mathieu - yeah please start a new issue on that matter Martin Dobias
03:45 AM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Great.
Martin, Alvaro, should I file an issue to re-introduce the deactivation of simplification when exporting from...
Mathieu Pellerin - nIRV
03:25 AM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Actually I see where the problem is - DPI should not be involved in comupation anymore. I will commit a patch soon Martin Dobias
03:49 AM Bug report #10234: Difficult to edit nodes of polygons close together
Sample project and layers attached. Patrick Dunford

2014-05-11

01:09 AM Bug report #10235 (Closed): Bottommost layers in a legend group cannot be re-added
Steps to reproduce the bug:
1. Create a new group in the map legend.
2. Add 7 or more layers* to the map.
3. Drag & d...
Raimund Schnuerer
12:43 AM Bug report #10234 (Closed): Difficult to edit nodes of polygons close together
If I am editing a layer that contains polygons close together it can be almost impossible to select the one I am tryi... Patrick Dunford
11:06 PM Feature request #10222: Geopackage support: add layer through Browser
See also #10228 Paolo Cavallini
11:06 PM Feature request #10228 (Closed): Geopackage: support Drag&Drop for importing vectors
Geopackage should have the same functionality as other DBs; importing data through D6D is important. Paolo Cavallini
10:53 PM Bug report #10227: QGIS2.2 - SAGA Gridding shapefile with only one point
Is this an upstream issue? Paolo Cavallini
03:24 AM Bug report #10227 (Closed): QGIS2.2 - SAGA Gridding shapefile with only one point
Hello,
here the problem:
I'd like to rasterize 1-point shapefile with the command: Grid-Gridding --> Shapes to grid
...
robert vech
10:24 PM Bug report #9573: hostnames with non-ascii characters cause python console to fail.
See this
@'C:\\\\Python27', 'C:\\\\Python27\\\\Lib', 'C:\\\\Python27\\\\DLLs', 'C:\\\\Python27\\\\Doc', 'C:\\\\Pyth...
Nathan Woodrow
10:13 PM Bug report #9573: hostnames with non-ascii characters cause python console to fail.
No--(I WAS running QGIS 64--but now running 32).
The results all varied very slightly, depending on what things I di...
Tim Paysen
05:39 PM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Is the plan for disabling of simplification upon export to return before the release of 2.4? That'd be important.
T...
Mathieu Pellerin - nIRV
05:07 PM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Hi, I reproduce this issue when the composer draw the map too.
Currently simplification is enabled in composer (htt...
Alvaro Huarte
10:32 AM Feature request #10054 (Closed): Using of postgis tables in batch mode
Paolo Cavallini
06:31 AM Feature request #10054: Using of postgis tables in batch mode
i think this ticket can be closed
s.
stefano campus
06:42 AM Bug report #6163 (Closed): Saving table causes the appearance of "null" values
stefano campus

2014-05-10

04:06 PM Feature request #10226 (Open): Add expressions to diagrams (tab position)
Hi,
In the layer's properties, there is now the possibility to add expressions on size and attributes fields of diagr...
Harrissou Santanna

2014-05-09

10:05 PM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Martin, I'm perplexed. Isn't simplification only used in qgis' main canvas & disabled when exporting to images via th... Mathieu Pellerin - nIRV
09:33 PM Bug report #10217: Regression: line marker symbology misaligned when (composer) exported on two l...
Actually it is caused by simplification - with simplification disabled the markers align perfectly. Martin Dobias
04:25 PM Feature request #10222 (In Progress): Geopackage support: add layer through Browser
fixed in master. You can now browse and open .gpk files. Setting as 50% done as it would be nice to add persistent en... Etienne Tourigny
04:25 PM Feature request #10222 (In Progress): Geopackage support: add layer through Browser
fixed in master. You can now browse and open .gpk files. Setting as 50% done as it would be nice to add persistent en... Etienne Tourigny
12:26 PM Feature request #10222: Geopackage support: add layer through Browser
Oh I think I understand what you mean - you add support for geopackage files when browsing the directory tree right? ... Etienne Tourigny
12:10 PM Feature request #10222: Geopackage support: add layer through Browser
the spatialite data items use the spatialite provider (AFAIK) not the gdal provider. Wouldn't it be better to do some... Etienne Tourigny
12:03 PM Feature request #10222: Geopackage support: add layer through Browser
Perhaps cloning the spatialite entry? Paolo Cavallini
11:59 AM Feature request #10222: Geopackage support: add layer through Browser
That isn't as simple as it seems, as there is no such functionality in the ogr provider.
Perhaps that and the spati...
Etienne Tourigny
08:48 AM Feature request #10222 (Closed): Geopackage support: add layer through Browser
With GDAL 1.11 we got gpkg support for free. However, layers can be added only through "Add vector" dialog.
Please ad...
Paolo Cavallini
02:00 PM Feature request #10054: Using of postgis tables in batch mode
thank you very much for adding these useful new feature
s.
stefano campus
08:53 AM Bug report #10224 (Closed): Loading Geopackage sample crashes QGIS on Debian (works on Ubuntu and...
Try http://www.geopackage.org/data/geonames_belgium.gpkg
Windows, nghtly, gdal 1.11
Paolo Cavallini
08:50 AM Feature request #10223 (Closed): Geopackage support: make creation of a new DB possible
Possibly cloning the existing New Spatialite Database would be rather simple Paolo Cavallini
08:08 AM Bug report #6389: Print composer: opacity not working for maps
1) Thanks, that's brilliant to know. A little off topic maybe, but is 'cache' the default simply because it's the low... Simon Dedman
02:46 AM Bug report #6389: Print composer: opacity not working for maps
Simon Dedman wrote:
> Apologies for the attitude; I've spent a few days trying to do simple outputs of 2 layer maps a...
Giovanni Manghi
06:17 AM Bug report #10216 (Closed): can't set empty geometry with QgsVectorDataProvider::changeGeometryVa...
closed with commit 38e694713a742baa85577c6454934d0ca43a7f66 thanks to Jürgen fisher for some modification of the pull... Luigi Pirelli
03:11 AM Bug report #10216: can't set empty geometry with QgsVectorDataProvider::changeGeometryValues(QgsG...
I can confirm bug also pro Postgres provider Luigi Pirelli
03:03 AM Bug report #10216: can't set empty geometry with QgsVectorDataProvider::changeGeometryValues(QgsG...
First type error
TypeError: QgsVectorDataProvider.changeGeometryValues(dict-of-qint64-QgsGeometry): argument 1 has u...
Luigi Pirelli
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
06:04 AM Feature request #8711: Please add decent North arrows
Hi, I came across this issue when reading the developer mailing list and thought I could create some North arrows. I ... Asier Sarasua
05:47 AM Feature request #8711: Please add decent North arrows
Giovanni - I am assuming you mean add categories to the Layout/Add Image/Search Directories? That helps, but, the re... Jeff McKenna
02:48 AM Feature request #8711: Please add decent North arrows

> Consistent feedback I get from students using the QGIS Print Composer is the confusion over adding a North arrow. ...
Giovanni Manghi
04:23 AM Bug report #3708: Load SOSI files in QGIS 1.7 with GDAL 1.8
On Windows, SOSI support in GDAL can now also be build as a plugin. A ready to use binary of the plugin is available ... Stefan Blumentrath
04:23 AM Bug report #3708: Load SOSI files in QGIS 1.7 with GDAL 1.8
On Windows, SOSI support in GDAL can now also be build as a plugin. A ready to use binary of the plugin is available ... Stefan Blumentrath
03:08 AM Bug report #10220 (Closed): Mean coordinate(s) function in processing - not possible to avoid usi...
In QGIS 2.2 - processing 2.2.0-1, when using the mean coordinate(s) function from Processing, it does not seem to be ... Håvard Tveite
02:49 AM Bug report #10219 (Feedback): QGIS crash in WFS client when inserting large number of objects
Does it happens with previous QGIS releases? Does it happens on qgis master? Giovanni Manghi
02:27 AM Bug report #10206 (Open): Remove Layer with Openlayer basemap crashes project
Confirmed with the attached project on both Linux and Windows. It does not seems related to the OL plugin as ut happe... Giovanni Manghi
02:27 AM Bug report #10206 (Open): Remove Layer with Openlayer basemap crashes project
Confirmed with the attached project on both Linux and Windows. It does not seems related to the OL plugin as ut happe... Giovanni Manghi
02:27 AM Bug report #10206 (Open): Remove Layer with Openlayer basemap crashes project
Confirmed with the attached project on both Linux and Windows. It does not seems related to the OL plugin as ut happe... Giovanni Manghi

2014-05-08

01:25 AM Bug report #10219 (Closed): QGIS crash in WFS client when inserting large number of objects
I have encountered a serious issue with QGIS 2.2. We mostly use QGIS as a WFS client for a Geoserver, where it's used... Jacob Madsen
12:39 AM Bug report #10218 (Closed): Couldn't load PyQGIS
Jürgen Fischer
08:12 PM Bug report #10218 (Closed): Couldn't load PyQGIS
I just updated to latest OSGeo4W and got a message:... Mikhail Tchernychev
12:35 AM Bug report #10216: can't set empty geometry with QgsVectorDataProvider::changeGeometryValues(QgsG...
testing first case:
1) get a spatialite layer and select it (geometry constraing have to allow empty geometry or NUL...
Luigi Pirelli
12:49 PM Bug report #10216 (Closed): can't set empty geometry with QgsVectorDataProvider::changeGeometryVa...
I discovered the problem trying to set value using python binding using Spatialite provider. I didn't test on postgis... Luigi Pirelli
11:25 PM Feature request #8711: Please add decent North arrows
Nice additions! Are you able to turn them into a PR?
Concerning #03
Maybe it could be improved by making the South a...
Matthias Kuhn
03:39 PM Feature request #8711: Please add decent North arrows
Antonio Locandro - 02 and 04 look fantastic! 03 is a bit confusing though with it's two arrows in opposing directions. Nyall Dawson
02:57 PM Feature request #8711: Please add decent North arrows
Hi everyone, I'd like to make a comment, but I'm a little scared/hesitant as I, am a long-time QGIS user (very long, ... Jeff McKenna
12:59 PM Feature request #8711: Please add decent North arrows
Hi
Bear in mind using N limits the application to a subset of our users. We should at least provide variants which h...
Tim Sutton
12:40 PM Feature request #8711: Please add decent North arrows
And a third one Antonio Locandro
11:07 AM Feature request #8711: Please add decent North arrows
Here is a second one, this one looks one way in Inkscape and browsers but for some reason QGIS renders it slightly di... Antonio Locandro
10:35 AM Feature request #8711: Please add decent North arrows
This if my first attempt, any comments welcome. I successfully added initially the ability to change colors for the s... Antonio Locandro
10:58 PM Bug report #2718 (Closed): selecting too large symbol size takes ages to display
Paolo Cavallini
11:41 AM Bug report #2718 (Feedback): selecting too large symbol size takes ages to display
Giovanni Manghi
11:40 AM Bug report #2718: selecting too large symbol size takes ages to display
Just tested in master now and the problem seems to be gone. Anita Graser
07:41 PM Bug report #10217 (Closed): Regression: line marker symbology misaligned when (composer) exported...
Under QGIS master, line marker symbology on two layers using the same data source (i.e. same shapefile) and symbology... Mathieu Pellerin - nIRV
04:13 PM Feature request #10124: take advantage of gdal's vsipreload mechanism to support VSIFILE on all f...
added a pull request, this works with debian build
https://github.com/qgis/QGIS/pull/1342
Etienne Tourigny
03:46 PM Bug report #6389: Print composer: opacity not working for maps
Apologies for the attitude; I've spent a few days trying to do simple outputs of 2 layer maps and am a little surpris... Simon Dedman
03:38 PM Bug report #6389 (Closed): Print composer: opacity not working for maps
Please don't reopen a random unrelated bug like this which isn't the same issue as you're experiencing. Also, I'd sug... Nyall Dawson
03:38 PM Bug report #6389 (Closed): Print composer: opacity not working for maps
Please don't reopen a random unrelated bug like this which isn't the same issue as you're experiencing. Also, I'd sug... Nyall Dawson
03:16 PM Bug report #6389 (Reopened): Print composer: opacity not working for maps
Request to reopen this. QGis 2.2 in Windows 7. Please see "this":https://imgur.com/a/zuNv2 album.
Image 1: Normal QG...
Simon Dedman
03:31 PM Bug report #10206: Remove Layer with Openlayer basemap crashes project
I have tried with qgis --noplugins and it still happens
Start a new project
Add a few layers
Save project
Start remo...
Antonio Locandro
03:29 PM Bug report #10206: Remove Layer with Openlayer basemap crashes project
Here is the data Antonio Locandro
06:50 AM Bug report #10206 (Feedback): Remove Layer with Openlayer basemap crashes project
Hi Antonio:
* does happen in a reproducible way? if yes, can you attach project and sample data?
* have you tested d...
Giovanni Manghi
06:50 AM Bug report #10206 (Feedback): Remove Layer with Openlayer basemap crashes project
Hi Antonio:
* does happen in a reproducible way? if yes, can you attach project and sample data?
* have you tested d...
Giovanni Manghi
06:50 AM Bug report #10206 (Feedback): Remove Layer with Openlayer basemap crashes project
Hi Antonio:
* does happen in a reproducible way? if yes, can you attach project and sample data?
* have you tested d...
Giovanni Manghi
02:37 PM Feature request #9073: Apply Customizations without restarting QGIS
Another issue is that the Reset button does nothing, so if you customize something you can't reset Antonio Locandro
11:53 AM Bug report #10215 (Closed): Python error in QGIS master
When choosing "save to file..." in any module (any backend)
An error has occured while executing Python code:
Trac...
Giovanni Manghi
11:49 AM Feature request #10192 (Closed): Quick Finder
I think this is a duplicate of #2724 Anita Graser
11:49 AM Feature request #10192 (Closed): Quick Finder
I think this is a duplicate of #2724 Anita Graser
11:46 AM Feature request #10214 (Closed): Include Scipy in QGIS 64 bit
duplicates
http://trac.osgeo.org/osgeo4w/ticket/406
Giovanni Manghi
11:46 AM Feature request #10214 (Closed): Include Scipy in QGIS 64 bit
duplicates
http://trac.osgeo.org/osgeo4w/ticket/406
Giovanni Manghi
10:46 AM Feature request #10214 (Closed): Include Scipy in QGIS 64 bit
Hello,
it would be really useful to include the python library Scipy also in QGIS 64 bit for Windows (it is already i...
Luca Congedo
11:42 AM Bug report #10163: Categorized and graduated style do not work using shapefile as vector provider
Another related issue: In categorized renderer, the symbol defaults back to the default size=2 circle when the dialog... Anita Graser
10:01 AM Bug report #10163: Categorized and graduated style do not work using shapefile as vector provider
also reported here: #10179 Anita Graser
11:31 AM Bug report #1893: opening data tables widens the main window
same on Win8 Anita Graser
11:31 AM Bug report #1893: opening data tables widens the main window
same on Win8 Anita Graser
11:31 AM Bug report #1893: opening data tables widens the main window
same on Win8 Anita Graser
11:31 AM Bug report #1893: opening data tables widens the main window
same on Win8 Anita Graser
10:51 AM Feature request #1659: add a 'reload button' to the QGIS table
+1 for this - also for raster layers Etienne Tourigny
10:04 AM Bug report #10179: categorized style broken
I think it's the same issue as described in #10163 Anita Graser
10:03 AM Bug report #10179 (Closed): categorized style broken
Anita Graser
08:36 AM Bug report #10179: categorized style broken
I just posted this to gis.stackexchange and ndawson told me about the bug. I've already created "an imgur album":http... Simon Dedman
09:01 AM Feature request #9745: Value relation widget filter expression should have access to parent table...
On a related note:
My mid-term goal are
a) to move the "Value Relation" widget to make use of the information define...
Matthias Kuhn
08:10 AM Bug report #10208 (Closed): Panel/Window with the results of identification should always open on...
fixed in commit:4ecb1789 Jürgen Fischer
08:10 AM Bug report #10208 (Closed): Panel/Window with the results of identification should always open on...
fixed in commit:4ecb1789 Jürgen Fischer
08:10 AM Bug report #10208 (Closed): Panel/Window with the results of identification should always open on...
fixed in commit:4ecb1789 Jürgen Fischer
06:22 AM Bug report #10208 (Feedback): Panel/Window with the results of identification should always open ...
Cannot confirm 4) under master using Linux Mint (cinnamon DE). Giovanni Manghi
06:22 AM Bug report #10208 (Feedback): Panel/Window with the results of identification should always open ...
Cannot confirm 4) under master using Linux Mint (cinnamon DE). Giovanni Manghi
06:22 AM Bug report #10208 (Feedback): Panel/Window with the results of identification should always open ...
Cannot confirm 4) under master using Linux Mint (cinnamon DE). Giovanni Manghi
06:22 AM Bug report #10208 (Feedback): Panel/Window with the results of identification should always open ...
Cannot confirm 4) under master using Linux Mint (cinnamon DE). Giovanni Manghi
08:03 AM Feature request #10213 (Feedback): Snapping option - Add Spinner to Tolerance
It would be nice to have a spinner for the Tolerance so I can set the desired tolerance with my mouse, Also I think t... Antonio Locandro
07:58 AM Bug report #8353: Default Snapping Not Working
Should this be closed? Antonio Locandro
07:46 AM Bug report #10210 (Closed): Styling - Line pattern fill, angle issue
Please reopen if you find that #9713 does not solves the issue. Giovanni Manghi
07:46 AM Bug report #10210 (Closed): Styling - Line pattern fill, angle issue
Please reopen if you find that #9713 does not solves the issue. Giovanni Manghi
07:02 AM Bug report #10210: Styling - Line pattern fill, angle issue
Christopher Wesson wrote:
> As in report #9713:
>
> Thanks Giovanni but I cannot test master. We are now all working...
Giovanni Manghi
07:00 AM Bug report #10210: Styling - Line pattern fill, angle issue
As in report #9713:
Thanks Giovanni but I cannot test master. We are now all working on managed versions of Windows ...
Christopher Wesson
06:52 AM Bug report #10210 (Feedback): Styling - Line pattern fill, angle issue
this should be fixed in master, please test and leave feedback, thanks
#9713
Giovanni Manghi
06:52 AM Bug report #10210 (Feedback): Styling - Line pattern fill, angle issue
this should be fixed in master, please test and leave feedback, thanks
#9713
Giovanni Manghi
02:39 AM Bug report #10210 (Closed): Styling - Line pattern fill, angle issue
In 2.2 the Angle setting on line pattern fills (one of the Symbol layer types) works fine up to 90 degrees. Over 90 d... Christopher Wesson
07:35 AM Bug report #10212: Handle bad layer fail between 2.0.1 and 2.2.0
confirmed also on master. Giovanni Manghi
07:35 AM Bug report #10212: Handle bad layer fail between 2.0.1 and 2.2.0
confirmed also on master. Giovanni Manghi
07:35 AM Bug report #10212: Handle bad layer fail between 2.0.1 and 2.2.0
confirmed also on master. Giovanni Manghi
07:35 AM Bug report #10212: Handle bad layer fail between 2.0.1 and 2.2.0
confirmed also on master. Giovanni Manghi
05:25 AM Bug report #10212 (Closed): Handle bad layer fail between 2.0.1 and 2.2.0
When opening a 2.0.1 file in 2.2.0 I get the 'Handle bad layers' dialogue for GZ files (which in my case are zipped G... Christopher Wesson
07:18 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
I can confirm the issue:
on QGIS 2.2/master when adding one of the layers of the above mentioned server, choosing 31...
Giovanni Manghi
07:18 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
I can confirm the issue:
on QGIS 2.2/master when adding one of the layers of the above mentioned server, choosing 31...
Giovanni Manghi
07:18 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
I can confirm the issue:
on QGIS 2.2/master when adding one of the layers of the above mentioned server, choosing 31...
Giovanni Manghi
07:18 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
I can confirm the issue:
on QGIS 2.2/master when adding one of the layers of the above mentioned server, choosing 31...
Giovanni Manghi
07:18 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
I can confirm the issue:
on QGIS 2.2/master when adding one of the layers of the above mentioned server, choosing 31...
Giovanni Manghi
06:59 AM Bug report #9713: No angle > 90° in line pattern fill in layer properties
Fed back in report #10210
Thanks Giovanni but I cannot test master. We are now all working on managed versions of Wi...
Christopher Wesson
06:57 AM Bug report #10202: QGIS crashes when displaying joined data with graduated symbology
It happens also on 2.2 but not 2.1 then is a regression. Giovanni Manghi
06:57 AM Bug report #10202: QGIS crashes when displaying joined data with graduated symbology
It happens also on 2.2 but not 2.1 then is a regression. Giovanni Manghi
06:57 AM Bug report #10202: QGIS crashes when displaying joined data with graduated symbology
It happens also on 2.2 but not 2.1 then is a regression. Giovanni Manghi
06:45 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I can confirm the issue on both 2.2 and master, and confirm also that 2.1 is not affected and then that is a regressi... Giovanni Manghi
06:45 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I can confirm the issue on both 2.2 and master, and confirm also that 2.1 is not affected and then that is a regressi... Giovanni Manghi
06:45 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I can confirm the issue on both 2.2 and master, and confirm also that 2.1 is not affected and then that is a regressi... Giovanni Manghi
06:45 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I can confirm the issue on both 2.2 and master, and confirm also that 2.1 is not affected and then that is a regressi... Giovanni Manghi
06:45 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
I can confirm the issue on both 2.2 and master, and confirm also that 2.1 is not affected and then that is a regressi... Giovanni Manghi
03:01 AM Bug report #10211: Styling - changing SVG fills causing crash dump and exit
Dump file would not attach? Christopher Wesson
03:00 AM Bug report #10211 (Closed): Styling - changing SVG fills causing crash dump and exit
In 2.2.0 I can load in custom SVG by placing a folder of them in C:\\Program Files\\QGIS Valmiera\\apps\\qgis\\svg. F... Christopher Wesson
05:16 AM Bug report #10205: Size of markers in marker line broken in master
maybe it is just another incarnation of the issue that broke graduated/categorized symbology in qgis master. Giovanni Manghi
05:16 AM Bug report #10205: Size of markers in marker line broken in master
maybe it is just another incarnation of the issue that broke graduated/categorized symbology in qgis master. Giovanni Manghi
04:28 AM Bug report #10099 (Closed): Ubuntu 14.04: python-qgis does not install
fixed commit:f96c8d7 Jürgen Fischer
04:28 AM Bug report #10099 (Closed): Ubuntu 14.04: python-qgis does not install
fixed commit:f96c8d7 Jürgen Fischer
04:28 AM Bug report #10099 (Closed): Ubuntu 14.04: python-qgis does not install
fixed commit:f96c8d7 Jürgen Fischer
04:16 AM Bug report #10099: Ubuntu 14.04: python-qgis does not install
Hi Benedikt,
I think this is due to including pyspatialite now in python-qgis. If you want to get around this uninsta...
Nicholas Latham
02:50 AM Bug report #10167: Deleting features in Attributes Table is very slow
The problem is that updating the table takes long. Most likely this is caused by the fact, that a single signal is se... Matthias Kuhn

2014-05-07

01:31 AM Bug report #10205: Size of markers in marker line broken in master
I confirm, it's a serious regression. Mathieu Pellerin - nIRV
05:54 PM Bug report #10205 (Closed): Size of markers in marker line broken in master
0575c71f2c884a638cd3656a539fc7ce65a26671 has broken marker line support. Steps to reproduce:
1. Try and style a laye...
Nyall Dawson
12:09 AM Bug report #10208 (Closed): Panel/Window with the results of identification should always open on...
1. Add any layer
2. Choose identify tool and click on a feature -> Indetification results window will appear docked
3...
Maxim Dubinin
11:35 PM Feature request #10207 (Rejected): Dedicated add North Arrow option in Print Composer
Duplicate of #8711 Paolo Cavallini
11:35 PM Feature request #10207 (Rejected): Dedicated add North Arrow option in Print Composer
Duplicate of #8711 Paolo Cavallini
11:31 PM Feature request #10207 (Rejected): Dedicated add North Arrow option in Print Composer
In its current state you need to add image and select SVG symbol, this is confusing. I think having a dedicated add N... Antonio Locandro
11:26 PM Bug report #10206 (Closed): Remove Layer with Openlayer basemap crashes project
If you have a project with vector layers and a openlayers basemap, removing the vector layer will crash the file at s... Antonio Locandro
10:33 PM Feature request #10124: take advantage of gdal's vsipreload mechanism to support VSIFILE on all f...
A pull request is probably better. Paolo Cavallini
07:09 PM Feature request #10124: take advantage of gdal's vsipreload mechanism to support VSIFILE on all f...
Attaching the vsipreload.cpp code and a patch that allows to build and install it as a shared library.
With this, qg...
Etienne Tourigny
07:09 PM Feature request #10124: take advantage of gdal's vsipreload mechanism to support VSIFILE on all f...
Attaching the vsipreload.cpp code and a patch that allows to build and install it as a shared library.
With this, qg...
Etienne Tourigny
09:44 PM Feature request #4080: Html formatted labels
CKeditor like WYSIWYG editor on top of HTML formSomething like this in Map composer, where you can also do tables eas... Azlan Budi
02:43 PM Bug report #9818: Crash when launching globe
For your information: I was about to file an issue about this, confirmating the bug in KUBUNTU 14.04, trying to make ... jtornero -
01:22 PM Feature request #10204 (Open): Better/faster keyboard support for editing values & labels in laye...
Manually editing value and therefore also label ranges can be a common requirement because of the "extra decimal prob... Simon Dedman
12:57 PM Feature request #10203 (Closed): Match labels to values
In layer properties > style, for categorised or graduated (and maybe other) style types, if the user manually edits t... Simon Dedman
12:44 PM Feature request #3566: Label properties cosmetics
Issue 2: see #5963 for related issue regarding decimals, if interested. Simon Dedman
12:42 PM Feature request #5963: too much decimals in graduated style classification
+1 for this. It would be nice to have an input field for the number of decimal places the users wants (or an up/down ... Simon Dedman
11:47 AM Bug report #10179: categorized style broken
#10163 is also consistent with this report. The dialog shown in that report shows an empty "Column" combobox in the d... Angus Carr
11:47 AM Bug report #10179: categorized style broken
#10163 is also consistent with this report. The dialog shown in that report shows an empty "Column" combobox in the d... Angus Carr
10:20 AM Bug report #9861 (Closed): self crossing lines stop rendering if offset is set
Fixed in changeset commit:"0c6056be5b3102089aaaec517908947edab7af9d". Jürgen Fischer
08:50 AM Feature request #6603: Concave hulls function
Concave Hull was added to Processing in #8b40a63f14b82089a33aff3d121110e24b9b1dca so this can be closed Piotr Pociask
07:40 AM Feature request #4637: Multiple labels on long polylines
https://github.com/qgis/QGIS/pull/1338 Denis Rouzaud
07:27 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
In version 2.0.1 -3 it doesn't occur. My screen resolution is 1920*1080 (and the map view doesn't take the whole scre... Lars Scharfenberg
07:20 AM Bug report #10196: not able to display certain WMS services in other coordinate system as WGS84 (...
The error message reveals that the WMS server is MapServer which is using the default maximum value of 2048 pixels fo... Jukka Rahkonen
02:49 AM Bug report #10196 (Closed): not able to display certain WMS services in other coordinate system a...
I'm having problems loading certain WMS layers into the canvas in version 2.2.0. I've tried to revert to version 2.0.... Lars Scharfenberg
05:54 AM Bug report #10202 (Closed): QGIS crashes when displaying joined data with graduated symbology
Seems like a pretty serious issue.
Add the attached two layers.
- Open the properties for the shapefile and join the...
Jonathan Moules
05:16 AM Bug report #10198: mapserver does not update when project file changes
PR is there https://github.com/qgis/QGIS/pull/1337 Vincent Mora
05:16 AM Bug report #10198: mapserver does not update when project file changes
PR is there https://github.com/qgis/QGIS/pull/1337 Vincent Mora
05:16 AM Bug report #10198: mapserver does not update when project file changes
PR is there https://github.com/qgis/QGIS/pull/1337 Vincent Mora
04:25 AM Bug report #10198 (Closed): mapserver does not update when project file changes
The cache should be updated thanks to QFileSystemWatcher in QgsConfigCache, but processEvents() is never called in th... Vincent Mora
02:01 AM Feature request #8141: query / filter on attribute tables with external tables joined
still the same problem in qgis 2.2 valmiera and 2.3-master(build from 2014-05-02))
had some tests with Layer / quer...
robert kalasek

2014-05-06

08:11 PM Bug report #10195 (Closed): Offset line symbology added to polygon layer leads to crash
Current master crashes if a simple line symbol layer is added to a polygon, when an offset is added to the simple lin... Nyall Dawson
06:01 PM Bug report #10181: Graduated Style shows also non numeric columns
Hi, I propose this pull (https://github.com/qgis/QGIS/pull/1336) to solve it.
Best regards
Alvaro Huarte
06:01 PM Bug report #10181: Graduated Style shows also non numeric columns
Hi, I propose this pull (https://github.com/qgis/QGIS/pull/1336) to solve it.
Best regards
Alvaro Huarte
03:49 PM Bug report #7989 (Feedback): QGIS Nightly (June 2-3) Filter Vector, sql query
Giovanni Manghi
07:43 AM Bug report #7989: QGIS Nightly (June 2-3) Filter Vector, sql query
Is this still an issue? This ticket refers to an old version Antonio Locandro
09:53 AM Feature request #10192 (Closed): Quick Finder
There is a python plugin which does the expected behavior but this happens to be one of the most used functions in a ... Antonio Locandro
09:40 AM Feature request #4924: Join attributes - add the option of creating a shapefile with matching att...
Ok so spent 2 hours working around to realize that this is the default behaviour, I should have looked at the issue l... Antonio Locandro
09:00 AM Feature request #4924: Join attributes - add the option of creating a shapefile with matching att...
This is very important feature for some of us that do this often. I believe when doing a join there should be an opti... Antonio Locandro
08:39 AM Bug report #10189 (Closed): Print Composer: Proxy does not work for HTML frame
Fixed in changeset commit:"4efa70d43348cc251d791eefb8c4470e2fdb7dee". Jürgen Fischer
07:50 AM Bug report #10189 (Closed): Print Composer: Proxy does not work for HTML frame
It seems that for the html-frame in print composer the proxy settings are not honored. I tested with the http-proxy, ... Andreas Neumann
07:51 AM Feature request #10190 (Open): Expression based label load expressions from file
When using Expression based labels one can create complex expressions, I know that currently one gets the most recent... Antonio Locandro
07:34 AM Feature request #6147: Ability to toggle vector layer query
I agree this would be an awesome feature to be added, it could even be a nice to have feature to be able to have seve... Antonio Locandro
06:56 AM Bug report #10177 (Closed): Field expression control keeps jumping to end of text
ok, this has been solved by not sending expression to the model at each key press.
instead the expression is sent whe...
Denis Rouzaud
06:41 AM Bug report #10188 (Closed): Postgresql connection with i18n characters in either username or pass...
When I try to connect to Postgresql server with my user and pass containing i18n chars I get "password authentication... Csaba Sandor
03:08 AM Bug report #10187 (Closed): fill button disappears with alpha channel
In some machines, when an alpha channel (128) is chosen in the single symbol the fill button disappears. It is availa... matteo ghetta
02:38 AM Bug report #4955: Wrong results, when calculated results are too long for DBF field
see also #10186 Giovanni Manghi
02:38 AM Bug report #10186 (Closed): Shapefiles, big integer fields, values are set negative when too big
duplicates #4955 and #4766
please add you comments/dataset there, thanks!
Giovanni Manghi
02:38 AM Bug report #10186 (Closed): Shapefiles, big integer fields, values are set negative when too big
duplicates #4955 and #4766
please add you comments/dataset there, thanks!
Giovanni Manghi
02:17 AM Bug report #10178 (Closed): fieldChanged not emitted when expression edited in field expression c...
#b9f5477b7ffa73c1f8ae79fd623a76c9fc5bd2ce Denis Rouzaud
02:13 AM Bug report #10168 (Closed): Field expression control doesn't grey out text when disabled
#b9f5477b7ffa73c1f8ae79fd623a76c9fc5bd2ce Denis Rouzaud

2014-05-05

01:53 AM Bug report #10186 (Closed): Shapefiles, big integer fields, values are set negative when too big
I am unable to edit integer fields (type Numeric, 15 digits). When I try to enter a big value, e.g. 12500201223125, i... Jean-Luc Le Bliguet
01:35 AM Bug report #10177: Field expression control keeps jumping to end of text
I am facing troubles to resolve this one...
The problem is that editing text will change the model...and changing the...
Denis Rouzaud
01:10 AM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
When running the installer and looking at the menu showed in your attached image, gdal-filegdb is 1.11.0-1. However, ... James Duffy
08:58 AM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
You should see something like the attached image Antonio Locandro
01:01 AM Bug report #10167: Deleting features in Attributes Table is very slow
Deleting in the canvas and from the attribute table is the same. It's deleting features while having the attribute t... Jürgen Fischer
03:01 PM Bug report #10167: Deleting features in Attributes Table is very slow
I also confirm this, both with QGIS 2.2 and 2.3 master, but I think that depends on the amount of features that are s... Pedro Venâncio
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
04:46 AM Bug report #10167: Deleting features in Attributes Table is very slow
I can confirm on different platforms and QGIs versions, but at least in my tests is does not depend on how many featu... Giovanni Manghi
11:04 PM Bug report #10080: Model does not show up in toolbox due to erroneous "Error in algorithm name"
Okay. Will have to do a minor model redesign then. A note in the documentary would be great. Thank you. Thomas Horner
02:20 PM Bug report #10080 (Feedback): Model does not show up in toolbox due to erroneous "Error in algori...
The modeler only support one level of nesting. A model with a model that itself contain another model will not work. ... Victor Olaya
02:14 PM Bug report #10080: Model does not show up in toolbox due to erroneous "Error in algorithm name"
It looks like this has something to do with the number of model hierarchies in each algorithm. For instance all of t... Thomas Horner
04:50 PM Bug report #10185 (Closed): Documentation navigation (next/previous page) missing
I'm going through documentation on the WIKI - http://www.qgis.org/en/docs/training_manual/introduction/preparation.ht... Timothy Reaves
04:48 PM Bug report #10184 (Closed): Mac dialogs not support shortcut keys
In dialogs - like Save As & Save - where text can be entered, the standard Mac shortcut keys are not support. For ex... Timothy Reaves
03:04 PM Bug report #10179: categorized style broken
right, this is wat I meant! Alessandro Ciali
11:40 AM Bug report #10179: categorized style broken
I can confirm this issue. It has nothing to do with whether it is necessary to press classify or not. Categorized sty... Anita Graser
04:35 AM Bug report #10179 (Feedback): categorized style broken
There is a known issue with styling in master
#10163
but I'm not sure about the one you reported.
With the "catego...
Giovanni Manghi
04:35 AM Bug report #10179 (Feedback): categorized style broken
There is a known issue with styling in master
#10163
but I'm not sure about the one you reported.
With the "catego...
Giovanni Manghi
04:35 AM Bug report #10179 (Feedback): categorized style broken
There is a known issue with styling in master
#10163
but I'm not sure about the one you reported.
With the "catego...
Giovanni Manghi
04:35 AM Bug report #10179 (Feedback): categorized style broken
There is a known issue with styling in master
#10163
but I'm not sure about the one you reported.
With the "catego...
Giovanni Manghi
10:53 AM Feature request #10182: Possibility to hide/unhide columns
Antonio Locandro wrote:
> Yes I manage to use the widget you mention but if you have many fields it gets kind of tire...
Giovanni Manghi
10:51 AM Feature request #10182: Possibility to hide/unhide columns
Yes I manage to use the widget you mention but if you have many fields it gets kind of tiresome to click the widget a... Antonio Locandro
10:04 AM Feature request #10182: Possibility to hide/unhide columns
Antonio Locandro wrote:
> True thanks for pointing me to it. Don't you think it would be more usable and faster if a ...
Giovanni Manghi
10:00 AM Feature request #10182: Possibility to hide/unhide columns
True thanks for pointing me to it. Don't you think it would be more usable and faster if a column named Hidden like W... Antonio Locandro
09:39 AM Feature request #10182 (Closed): Possibility to hide/unhide columns
There is already this option, is the "hidden" edit widget. Giovanni Manghi
09:39 AM Feature request #10182 (Closed): Possibility to hide/unhide columns
There is already this option, is the "hidden" edit widget. Giovanni Manghi
09:37 AM Feature request #10182 (Closed): Possibility to hide/unhide columns
Sometimes in tables you got a lot of columns, but you actually just need sometimes to see a few, something like in Sp... Antonio Locandro
10:43 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
Hi,
I update the qgis from last dev.
After this I tested it with a obious small change due to the resolve #10156.
So...
aperi2007 -
05:06 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
Likely fixed in commit:43e1a635 - please test Martin Dobias
09:47 AM Feature request #5560: add option for field display order in identify window
Can the identify results display the fields in the order they are in the table? It's very confusing to have the field... Antonio Locandro
09:40 AM Bug report #6719: Add delimited text plugin: decimal point do not affect numerical fields other t...
Antonio Locandro wrote:
> Can someone check if this issue is valid still?
it is still valid for you (on qgis 2.2/mas...
Giovanni Manghi
09:38 AM Bug report #6719: Add delimited text plugin: decimal point do not affect numerical fields other t...
Can someone check if this issue is valid still? Antonio Locandro
09:14 AM Bug report #10181: Graduated Style shows also non numeric columns
Correct, and this is a regression as it used to work as expected. Giovanni Manghi
09:14 AM Bug report #10181: Graduated Style shows also non numeric columns
Correct, and this is a regression as it used to work as expected. Giovanni Manghi
09:14 AM Bug report #10181: Graduated Style shows also non numeric columns
Correct, and this is a regression as it used to work as expected. Giovanni Manghi
09:14 AM Bug report #10181: Graduated Style shows also non numeric columns
Correct, and this is a regression as it used to work as expected. Giovanni Manghi
09:14 AM Bug report #10181: Graduated Style shows also non numeric columns
Correct, and this is a regression as it used to work as expected. Giovanni Manghi
09:11 AM Bug report #10181 (Closed): Graduated Style shows also non numeric columns
When using the Graduated Style only numeric Column should appear, right now it shows all, which when you press Classi... Antonio Locandro
09:13 AM Bug report #10045: Error upon upgrading Processing (possibly other complex plugins)
Got this issue today
Couldn't load plugin 'processing' from ['C:/Users/antonio.locandro/.qgis2/python/plugins\\proce...
Antonio Locandro
08:52 AM Bug report #8752: Unable to open ESRI personal geodatabase in 2.0
For some reason QGIS keeps crashing on me for Personal Geodatabases in 32 bit, any ideas? I have tried QGIS with nopl... Antonio Locandro
03:58 AM Bug report #9751: MSYS shortcut doesn't handle path with spaces
If you quote all of the executables in the msys.bat vendor file, especially rxvt.exe, then the program goes away on W... Thad Kerosky
03:10 AM Feature request #10180 (Open): Show child relations in identify window
It would be nice to see the child features from a relation in the identify results panel. There could be a new group ... Nyall Dawson
03:04 AM Bug report #10175: OSGeo4w 2.2 build missing ECW support
And we can't have both gdal plugin versions installed? Is that correct? Nathan Woodrow

2014-05-04

01:22 AM Bug report #10175 (Closed): OSGeo4w 2.2 build missing ECW support
QGIS 2.2 is built against GDAL 1.10. Jürgen Fischer
01:22 AM Bug report #10175 (Closed): OSGeo4w 2.2 build missing ECW support
QGIS 2.2 is built against GDAL 1.10. Jürgen Fischer
06:29 PM Bug report #10175 (Closed): OSGeo4w 2.2 build missing ECW support
Seems the ECW support no longer works in the 2.2 build of OSGeo4W (32) bit. Might be related to the 1.11 GDAL update... Nathan Woodrow
01:13 AM Feature request #3430 (Open): fill pattern missing for point markers in new symbology engine
Giovanni Manghi
01:09 AM Feature request #3430: fill pattern missing for point markers in new symbology engine
Oups, Alister's right, this isn't fix; I got confused with the outline style vs fill style.
Could someone re-open t...
Mathieu Pellerin - nIRV
10:44 PM Feature request #3430: fill pattern missing for point markers in new symbology engine
Ummm. Why do you think this is fixed?
As far as I can tell we still have the same situation with fill styles (which ...
Alister Hood
12:40 AM Bug report #10179 (Closed): categorized style broken
With the latest master (commit:70225a3) categorized style can't be used. QGIS let you choose a field(s) for feature s... Alessandro Ciali
12:12 AM Feature request #7981: Add SVG symbol sets
One more: http://ngmdb.usgs.gov/fgdc_gds/geolsymstd/download.php
Licence to be checked.
Paolo Cavallini
12:08 AM Feature request #3748 (Closed): Centralized way of sharing styles
Duplicate of #1063 Paolo Cavallini
12:08 AM Feature request #3748 (Closed): Centralized way of sharing styles
Duplicate of #1063 Paolo Cavallini
12:08 AM Feature request #3748 (Closed): Centralized way of sharing styles
Duplicate of #1063 Paolo Cavallini
12:08 AM Feature request #1063: SVG Symbols repository
see also #3748 Paolo Cavallini
12:06 AM Bug report #10166: Anti-aliasing leads to visible borders even if borders have "no pen"
That hack is only feasible if you use a Single Symbol symbology. Otherwise you would need to update each class to hav... Johannes Kroeger
04:06 PM Bug report #10166: Anti-aliasing leads to visible borders even if borders have "no pen"
You can simply keep using border with the border color equal to the fill color - this will make the artifacts disappear. Martin Dobias
03:10 AM Bug report #10166 (Closed): Anti-aliasing leads to visible borders even if borders have "no pen"
The option "Options -> Rendering -> Rendering Quality: Make lines appear less jagged at the expense of some drawing p... Johannes Kroeger
12:05 AM Bug report #4418: Random colour ramp: randomize missing
Still true for current master Paolo Cavallini
11:50 PM Bug report #6428: Gui: horizontal spacer for "marker line" symbols seems out of place
Yeah, maybe it is fixed. Are you on Windows? I don't have a Windows machine to check there anymore. There is no vi... Alister Hood
05:01 AM Bug report #6428: Gui: horizontal spacer for "marker line" symbols seems out of place
Can this be closed? I can't see this horizontal spacer in current master... Nyall Dawson
10:52 PM Bug report #10178 (Closed): fieldChanged not emitted when expression edited in field expression c...
The fieldChanged signal is not emitted when the user edits an expression in the new field expression control. I belie... Nyall Dawson
10:37 PM Bug report #10177 (Closed): Field expression control keeps jumping to end of text
If I try and edit an expression in the new field expression control, the cursor keeps jumping to the end of the line ... Nyall Dawson
08:15 PM Feature request #10176: Can't delete vertices when measuring
Actually - scrap that. This functionality has never been present. Would be very useful to have though! Nyall Dawson
07:19 PM Feature request #10176 (Closed): Can't delete vertices when measuring
I'm pretty sure this is a regression from 2.0, which affects both master and 2.2. When measuring a polyline using the... Nyall Dawson
02:28 PM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
James Duffy wrote:
> Not sure which packages you're referring to. I installed QGIS with OSGEO4W. It could be that I o...
Jürgen Fischer
12:04 PM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
Jürgen Fischer wrote:
> Which packages are you using? Does your GDAL build support filegdb?
Not sure which packages...
James Duffy
12:03 PM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
Giovanni Manghi wrote:
> What OS?
Windows 7 Home Premium. Installed with OSGEO4W.
James Duffy
02:28 AM Bug report #10147 (Feedback): Unable to open File gdb with Add Vector Layer tool
What OS? Giovanni Manghi
02:28 AM Bug report #10147 (Feedback): Unable to open File gdb with Add Vector Layer tool
What OS? Giovanni Manghi
01:38 PM Bug report #10174 (Closed): sip module implements API v11.0 but the qgis.core module requires API...
I install QGIS2.2 64bits; then try to install PyQt4-4.10.4-gpl-Py2.7-Qt4.8.5-x64; I want to install "postgis_viewer" ... Allen Song
09:46 AM Feature request #10173 (Open): Allow specification of Size (=diameter) in Data-Defined Properties
I have some point data. I want to use circles as symbols for them. The circles should have a size defined by an numer... Johannes Kroeger
08:28 AM Bug report #10172 (Closed): html annotation does not respect composer setting 'Lock layers for ma...
[this is a copy of gis.stackexchange.com question here:
[[http://gis.stackexchange.com/questions/94793/qgis-html-anno...
Tom Grundy
08:23 AM Bug report #10171 (Closed): Layer "Save as" dialog suggests wrong CRS is used
The "Save as" dialog of a layer is misleading.
1. Load a WGS84 layer (I used a random shapefile).
2. In the Project ...
Johannes Kroeger
07:33 AM Bug report #10128: small bug in example script Extract_raster_values_to_shapefile.py and Extract_...
Hi, you also can contribute by submitting a pull request
on github repository: https://github.com/qgis/QGIS, thanks.
Salvatore Larosa
07:33 AM Bug report #10128: small bug in example script Extract_raster_values_to_shapefile.py and Extract_...
Hi, you also can contribute by submitting a pull request
on github repository: https://github.com/qgis/QGIS, thanks.
Salvatore Larosa
07:33 AM Bug report #10128: small bug in example script Extract_raster_values_to_shapefile.py and Extract_...
Hi, you also can contribute by submitting a pull request
on github repository: https://github.com/qgis/QGIS, thanks.
Salvatore Larosa
06:53 AM Feature request #9000: add option to allow marker line symbology start not at the beginning of th...
Thank you - this also fixes my 5 year old feature wish about stroke-dashoffset: #1772 Andreas Neumann
05:09 AM Feature request #9000 (Closed): add option to allow marker line symbology start not at the beginn...
Fixed in changeset commit:"26c6435a85b9360ad7f4e38c7878d8d8f38c908b". Nyall Dawson
06:52 AM Feature request #1772 (Closed): Allow individual stroke-dash parameters for line symbolizations
now fixed in changeset commit:26c6435a85b9360ad7f4e38c7878d8d8f38c908b
see also bug nr #9000
Andreas Neumann
06:52 AM Feature request #1772 (Closed): Allow individual stroke-dash parameters for line symbolizations
now fixed in changeset commit:26c6435a85b9360ad7f4e38c7878d8d8f38c908b
see also bug nr #9000
Andreas Neumann
06:52 AM Feature request #1772 (Closed): Allow individual stroke-dash parameters for line symbolizations
now fixed in changeset commit:26c6435a85b9360ad7f4e38c7878d8d8f38c908b
see also bug nr #9000
Andreas Neumann
06:06 AM Feature request #10170 (Open): Calculations should use the project's CRS, not the layer's
I am not sure if this is a bug or a feature request. I searched for this issue without success. This might even be co... Johannes Kroeger
05:09 AM Bug report #7699 (Closed): SVG fill missing default value for text width and border unit type
Fixed in changeset commit:"639d4c419f54f301ef083fb3167d29aa18d68b6e". Nyall Dawson
05:09 AM Bug report #10156 (Closed): When using SVG fill an odd expression is added to data defined proper...
Fixed in changeset commit:"43e1a635f70276a2d1c62f9c05c12e2833c98225". Nyall Dawson
02:41 AM Bug report #10156: When using SVG fill an odd expression is added to data defined properties -> b...
This is directly linked to #10153
because it is the presence of this expression that makes qgis crash if a svg fill ...
Giovanni Manghi
02:41 AM Bug report #10156: When using SVG fill an odd expression is added to data defined properties -> b...
This is directly linked to #10153
because it is the presence of this expression that makes qgis crash if a svg fill ...
Giovanni Manghi
05:09 AM Bug report #9945 (Closed): SVG fill dialog does not remember fill color
Fixed in changeset commit:"c1d3958d8b84f1730027ce2164fe5cfcc6c7b982". Nyall Dawson
04:58 AM Bug report #10169 (Closed): Button in field expression control has cramped icon
See attached screenshot - the expression button attached to the field expression control has a very small icon. It lo... Nyall Dawson
04:56 AM Bug report #10168 (Closed): Field expression control doesn't grey out text when disabled
The new field expression control isn't correctly greying out text when the control is disabled. See attached screensh... Nyall Dawson
04:28 AM Bug report #10167 (Closed): Deleting features in Attributes Table is very slow
When I delete many selected features in the Attribute Table view, it is very slow (minutes). When I just select them ... Johannes Kroeger
02:57 AM Bug report #10040 (Closed): singleparts to multipart fails (python error)
Fixed in master. Please reopen if necessary. Salvatore Larosa
02:57 AM Bug report #10040 (Closed): singleparts to multipart fails (python error)
Fixed in master. Please reopen if necessary. Salvatore Larosa
02:30 AM Bug report #10143 (Feedback): Map composer stop working correctly
Please test QGIS master and check if it happens there too, then report back. Giovanni Manghi

2014-05-03

01:53 AM Bug report #10163: Categorized and graduated style do not work using shapefile as vector provider
Confirmed here. It only occurs using shape file. Other providers seem work just fine!
Also graduated style is broken!
Salvatore Larosa
01:53 AM Bug report #10163: Categorized and graduated style do not work using shapefile as vector provider
Confirmed here. It only occurs using shape file. Other providers seem work just fine!
Also graduated style is broken!
Salvatore Larosa
09:42 AM Bug report #10163 (Closed): Categorized and graduated style do not work using shapefile as vector...
I tried to use categorized classify on a vector layer and the result is not usable, because it displayed all kind of ... Gabor Ganzer
04:21 PM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields
follow-up issue: #10165 Anita Graser
04:21 PM Bug report #10165 (Closed): Cannot use "less than"/"greater than" operators on date fields
(This is a follow-up ticket of #9241)
There is an issue querying date fields: I cannot seem to use < and > operators...
Anita Graser
03:56 PM Bug report #10147: Unable to open File gdb with Add Vector Layer tool
Which packages are you using? Does your GDAL build support filegdb? Jürgen Fischer
03:53 PM Bug report #10150 (Closed): Georeferencer missing from OSGEO4W dev builds
Jürgen Fischer
01:54 PM Feature request #9387: Print Composer - Coordinate system as expression
Antonio - the issue is that at the moment there's no contextual support for expressions. This is a prerequisite befor... Nyall Dawson
10:02 AM Feature request #9387: Print Composer - Coordinate system as expression
Hi I believe that this request would be nice to be implemented soon as I think it wouldn't be too complicated to obta... Antonio Locandro
10:09 AM Feature request #5042: Rename Print Composer to Layout
Maybe a decision should be reached on this instead of leaving a ticket open indefinitely. Do we rename Composer to La... Antonio Locandro
10:04 AM Feature request #9381: Print composer: add option for point grid
Maybe this should be checked if we should close it Antonio Locandro
09:58 AM Bug report #10164 (Closed): QGIS master crashes on zoom in / zoom out
Hi,
After a set of tests [0], I believe there is a problem with QGIS master in Precise 32bits.
It is continually cr...
Pedro Venâncio
09:53 AM Bug report #10143: Map composer stop working correctly
I can confirm this, it becomes unresponsive (Using Windows 8.1 and QGIS 2.2), you can't select any of the map compose... Antonio Locandro
07:00 AM Bug report #10099: Ubuntu 14.04: python-qgis does not install
I got the same issue. Yesterday I jumped from Xubuntu 12.04 to Xubuntu 14.04. Now I updated from QGIS 2.0 (ubuntugis ... Benedikt Ziegler
05:45 AM Bug report #8781: Selection of Character encoding
Also please note the Shapefile Encoding Fixer plugin. It allows you to examine the CPG and the LDID byte. I don't rem... Borys Jurgiel

2014-05-02

01:16 AM Bug report #4175: "outline: simple line" layer problem when rendering with non-zero offset values
Hi, related to this there is still a PR (https://github.com/qgis/QGIS/pull/1290) that has not been merged.
Best regar...
Alvaro Huarte
09:55 PM Bug report #4175 (Closed): "outline: simple line" layer problem when rendering with non-zero offs...
Mostly fixed by Alvaros' weeks-old commits. Follow ups have issues filed already, closing. Mathieu Pellerin - nIRV
09:55 PM Bug report #4175 (Closed): "outline: simple line" layer problem when rendering with non-zero offs...
Mostly fixed by Alvaros' weeks-old commits. Follow ups have issues filed already, closing. Mathieu Pellerin - nIRV
09:55 PM Bug report #4175 (Closed): "outline: simple line" layer problem when rendering with non-zero offs...
Mostly fixed by Alvaros' weeks-old commits. Follow ups have issues filed already, closing. Mathieu Pellerin - nIRV
12:04 AM Bug report #10159 (Closed): identity result panel should appear if previously closed when identit...
On QGIS master, following commit jef-n's commit:0c520391ae68e44165e46228016a43eae395c315, while the identity result p... Mathieu Pellerin - nIRV
11:56 PM Feature request #10158 (Open): the identity result panel should be init'ed upon qgis launch
Right now, the identity result panel is only init'ed upon selecting the identity tool. It's problematic now that the ... Mathieu Pellerin - nIRV
11:35 PM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
Hi,
the crash seem strictly related to the presence of the
"svgOutlineWidth_expression" in data-definition section....
aperi2007 -
11:15 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
Regression, does not crash on QGIS 2.0.1 Giovanni Manghi
11:15 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
Regression, does not crash on QGIS 2.0.1 Giovanni Manghi
11:06 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
crash confirmed (as well the first issue described that would be better to file as a separate ticket).... Giovanni Manghi
11:06 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
crash confirmed (as well the first issue described that would be better to file as a separate ticket).... Giovanni Manghi
11:06 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
crash confirmed (as well the first issue described that would be better to file as a separate ticket).... Giovanni Manghi
11:06 AM Bug report #10153: QGIS master crashes if SVG is missing (SVG fill)
crash confirmed (as well the first issue described that would be better to file as a separate ticket).... Giovanni Manghi
05:09 AM Bug report #10153 (Closed): QGIS master crashes if SVG is missing (SVG fill)
*New description:*
if a SVG fill is defined and then the SVG is missing, then QGIS 2.2/master crashes when opening/z...
aperi2007 -
11:06 PM Feature request #7058: Snapping priority - Prioritise vertices over lines
Could you check if the latest master is better regarding the snapping priority? I modified the snapping order to pref... Leyan Ouyang
09:57 PM Feature request #9478 (Closed): offer ubuntugis-based qgis master builds for ubuntu 13.10 (saucy ...
With 14.04 LTS out that includes gdal 1.10, this isn't much of an issue anymore. Mathieu Pellerin - nIRV
09:57 PM Feature request #9478 (Closed): offer ubuntugis-based qgis master builds for ubuntu 13.10 (saucy ...
With 14.04 LTS out that includes gdal 1.10, this isn't much of an issue anymore. Mathieu Pellerin - nIRV
09:56 PM Feature request #3430 (Closed): fill pattern missing for point markers in new symbology engine
It's done, wouhou. Mathieu Pellerin - nIRV
09:56 PM Feature request #3430 (Closed): fill pattern missing for point markers in new symbology engine
It's done, wouhou. Mathieu Pellerin - nIRV
09:52 PM Bug report #8804 (Closed): data-defined size and "normal" property size setting for polygon centr...
Closing, data-defined size value represents area, which is not the case for the normal UI-driven size value. Mathieu Pellerin - nIRV
09:52 PM Bug report #8804 (Closed): data-defined size and "normal" property size setting for polygon centr...
Closing, data-defined size value represents area, which is not the case for the normal UI-driven size value. Mathieu Pellerin - nIRV
04:03 PM Feature request #9689: Joins should be more mindful of DBF field name length limitations
When you open the attribute table it shows the join fields as they are unless duplicate I believe it adds a _1 or som... Antonio Locandro
03:58 PM Feature request #10157 (Open): Able to distinguish Layers with a Join or that show only a Subset ...
Ok basically this
If a layer has a join or a subset query have some way to show that in the Layer Tree View, maybe H...
Antonio Locandro
03:54 PM Feature request #9129: Use columns aliases when doing a "save as..." of a layer/table with a join
I was banging my head all this week on why QGIS did this weird number to joins saved as shapefiles, I guess there is ... Antonio Locandro
12:15 PM Bug report #8781 (Closed): Selection of Character encoding
Since no one has commented, I can close this my self.
There's no problem in QGIS 2.2 with this any more.
Klas Karlsson
11:20 AM Bug report #10156 (Closed): When using SVG fill an odd expression is added to data defined proper...
In QGIS 2.0.1, 2.2 and master open a polygon vector, make an svg fill and save project.
Reopen project and go to dat...
Giovanni Manghi
10:59 AM Bug report #7679 (Feedback): DBManager does not release PostGIS connections
Ivan Mincik wrote:
> Here is a working patch which will fix connection holding issue by setting DB Manager connection...
Giovanni Manghi
10:59 AM Bug report #7679 (Feedback): DBManager does not release PostGIS connections
Ivan Mincik wrote:
> Here is a working patch which will fix connection holding issue by setting DB Manager connection...
Giovanni Manghi
05:37 AM Bug report #7679: DBManager does not release PostGIS connections
Here is a working patch which will fix connection holding issue by setting DB Manager connection to AUTOCOMMIT isolat... Ivan Mincik
04:00 AM Bug report #7679: DBManager does not release PostGIS connections
By my quick test only displaying data from table is not working when setting ISOLATION_LEVEL_AUTOCOMMIT for connection. Ivan Mincik
03:51 AM Bug report #7679: DBManager does not release PostGIS connections
Nyall, DB Manager connects with default isolation level which leaves connection in (IDLE in transaction). You can try... Ivan Mincik
09:49 AM Bug report #5067: QGIS crashes on Linux when adding MySQL layers
Same problem here with 2.2.0. Also, vector layer from database is often not displayed at all and zoom to extent not w... Vaclav Cermak
08:04 AM Bug report #10155 (Closed): Right to Left formating in Map Composer
When entering mixed Hebrew and English text with some punctuation characters in a text box, the order of the text get... Micha Silver
06:04 AM Bug report #10154 (Closed): Use pysqlite2 instead of pyspatialite for SpatiaLite connection in DB...
Starting from SpatiaLite 4 it is recommended to use SQLite loadable extensions instead of pyspatialite for connecting... Ivan Mincik
05:41 AM Bug report #10106: Panning a non-cached WFS layer causes selection to change
Fid is what is supposed to be unique and permanent in WFS and for making WFS-T to work it must be unique and permanen... Jukka Rahkonen
05:38 AM Bug report #10131: Incomplete srs.db in qgis 2.2
Still odd. That long path with blanks should be turned into a short path w/o blanks (as in my case). Jürgen Fischer
05:16 AM Feature request #10149 (Closed): Identify dock panel needs a button for "clear results"
Fixed in changeset commit:"0c520391ae68e44165e46228016a43eae395c315". Jürgen Fischer
05:16 AM Feature request #10152 (Closed): under qgis master, identity result panel should remember its doc...
Fixed in changeset commit:"0c520391ae68e44165e46228016a43eae395c315". Jürgen Fischer

2014-05-01

01:46 AM Bug report #10151 (Closed): expression-based label regression, wrongly displaying NULL instead of...
Fixed in changeset commit:"3d916633532b8bda2641eff76d6db55426ed1278". Jürgen Fischer
09:06 PM Bug report #10151: expression-based label regression, wrongly displaying NULL instead of nothing
It's definitively not desirable for labels to show NULL in a negative conditional expression; beyond the fact that th... Mathieu Pellerin - nIRV
09:03 PM Bug report #10151: expression-based label regression, wrongly displaying NULL instead of nothing
Yes this was changed by Jurgen but I do agree it's the wrong behavior. NULL should only be shown in attribute table, ... Nathan Woodrow
08:49 PM Bug report #10151 (Closed): expression-based label regression, wrongly displaying NULL instead of...
In the recent weeks, a regression has made its way to QGIS master resulting in expression-based labels labelling feat... Mathieu Pellerin - nIRV
10:04 PM Feature request #10152 (Closed): under qgis master, identity result panel should remember its doc...
The recent improvements to the Identity tool under qgis master are really nice. There's however a lack of implementat... Mathieu Pellerin - nIRV
04:47 PM Bug report #10150 (Closed): Georeferencer missing from OSGEO4W dev builds
The georeferencer plugin has disappeared from the latest OSGEO4W dev builds. Nyall Dawson
04:45 PM Feature request #10149 (Closed): Identify dock panel needs a button for "clear results"
Since the dock is now always shown, it's difficult to clear the results of an identify operation. At the moment you n... Nyall Dawson
03:15 PM Bug report #9771 (Closed): vector layer rendering incorrect with OTF on (on some zoom levels)
Fixed in changeset commit:"1f20630ec53df90df921de2c6580047bfa1a853f". Martin Dobias
02:15 PM Bug report #9241 (Closed): QgsVectorDataProvider.minimumValue() and maximumValue() don't work for...
Jürgen Fischer
01:54 PM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields
Min/max looks fine in master (OSGeo4W) with the new OGR included.
Unfortunately there is still an issue querying dat...
Anita Graser
12:46 PM Bug report #10132 (Closed): SVG markers aren't rendered properly when exported through QGIS composer
Fixed in changeset commit:"4f9c8c1dee684c029d6d800cd45d90e1f9d7ae7d". Martin Dobias
04:32 AM Feature request #10146: Add appropriate colour ramps to results of analyses
Yes, exactly. Paolo Cavallini
03:18 AM Feature request #10146 (Feedback): Add appropriate colour ramps to results of analyses
Do you know that you can set the rendering to use for the outputs of Processing? You can set a global one, and also a... Victor Olaya
02:35 AM Bug report #10145 (Closed): Projection EPSG 2398 inaccurate
This is not a QGIS issue, rather one of PROJ4, the underlying projection engine and its parameter database.
PROJ and ...
Andre Joost

2014-04-30

01:03 AM Bug report #10147 (Closed): Unable to open File gdb with Add Vector Layer tool
In QGIS 2.2.0 I am unable to select 'File GDB' from the dropdown menu when selecting 'Type' under the 'Source' submen... James Duffy
12:26 AM Feature request #10146 (Closed): Add appropriate colour ramps to results of analyses
One of the many features I like a lot in GRASS is that an appropriate colour ramp is automatically applied to the res... Paolo Cavallini
12:06 AM Bug report #10109 (Closed): centroid fill's svg marker are wrongly sized when exporting to image ...
This is a sub-issue of a broader regression with SVG markers, see #10132.
Closing this.
Mathieu Pellerin - nIRV
12:06 AM Bug report #10109 (Closed): centroid fill's svg marker are wrongly sized when exporting to image ...
This is a sub-issue of a broader regression with SVG markers, see #10132.
Closing this.
Mathieu Pellerin - nIRV
12:05 AM Bug report #10132: SVG markers aren't rendered properly when exported through QGIS composer
I've just verified the issue was _not_ present on QGIS 2.2, so this must be a MTR regression. Flagging this a such an... Mathieu Pellerin - nIRV
12:05 AM Bug report #10132: SVG markers aren't rendered properly when exported through QGIS composer
I've just verified the issue was _not_ present on QGIS 2.2, so this must be a MTR regression. Flagging this a such an... Mathieu Pellerin - nIRV
11:00 AM Bug report #10145 (Closed): Projection EPSG 2398 inaccurate
Projecting data from Gauß-Krüger 4, DHDN/Bessel (EPSG:31468), to Gauß-Krüger 4, Pulkova/Krasowski (EPSG 2398) and vic... Rudi Uhl
10:57 AM Bug report #10144 (Closed): shapefile disappear while pan and zoom
Feature disappears while pan and zoom, problem occurs only with red shapefile in the video Antonio Locandro
10:38 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
Here's the file I used https://dl.dropboxusercontent.com/u/1184727/va_2013.zip Paul Ramsey
10:38 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
Hi Alex,
I have also tested shapes and postgis with integer columns and no joy. Weird.
Giovanni Manghi
10:36 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
You can tell I'm a programmer, because that's the first thing I thought. I did have a file full of reals, so I made o... Paul Ramsey
10:33 AM Bug report #10140 (Feedback): no dropdown in Vector>Research>Random Points>Use value from input f...
Not reproducible here. Maybe your shapefile does not have any field with "integer" datatype? Alexander Bruy
10:33 AM Bug report #10140 (Feedback): no dropdown in Vector>Research>Random Points>Use value from input f...
Not reproducible here. Maybe your shapefile does not have any field with "integer" datatype? Alexander Bruy
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
03:29 AM Bug report #10140: no dropdown in Vector>Research>Random Points>Use value from input field
confirmed (on Linux and Windows), and it is a regression. Giovanni Manghi
10:26 AM Bug report #10137: Processing stripping out +towgs params
Confirmed here on master/ubuntu.
This is certainly a regression.
PS
It does not happen only for CRSs that may exist...
Giovanni Manghi
10:26 AM Bug report #10137: Processing stripping out +towgs params
Confirmed here on master/ubuntu.
This is certainly a regression.
PS
It does not happen only for CRSs that may exist...
Giovanni Manghi
10:26 AM Bug report #10137: Processing stripping out +towgs params
Confirmed here on master/ubuntu.
This is certainly a regression.
PS
It does not happen only for CRSs that may exist...
Giovanni Manghi
08:22 AM Bug report #9785: Recent expressions missing in field calculator
Hi any updates on this issue? Antonio Locandro
07:41 AM Bug report #10104: new identification mode selection not working as expected
yeah, this sounds perfect.
thanks.
Denis Rouzaud
06:48 AM Bug report #10143 (Closed): Map composer stop working correctly
After short time, the map composer stop to work correctly. It is not possible to select another element of the map co... Lucien Blandenier
06:45 AM Bug report #10106: Panning a non-cached WFS layer causes selection to change
Most datasets will have a unique primary key. You could allow a user to choose a primary key field to make selections... Heikki Vesanto
03:29 AM Bug report #10106: Panning a non-cached WFS layer causes selection to change
Confirmed. For example, if I select one feature that has an internal ID value "2" in QGIS and pan to a new location, ... Jukka Rahkonen
04:25 AM Bug report #10141 (Closed): Setting data defined properties "Pen width" and "Dash pattern" causes...
Setting "Data defined properties" "Pen width" and "Dash pattern" at the same time on a vector layer causes QGIS an un... Nicklas Larsson
03:36 AM Bug report #9853: HTTPS doesn't work throught proxy
OK, that sounds great. Thanks Guillaume SUEUR
03:28 AM Bug report #9853 (Closed): HTTPS doesn't work throught proxy
Guillaume SUEUR wrote:
> When you indicate you closed that bug, are you talking about this very one ?
Guess so.
Jürgen Fischer
03:14 AM Bug report #9853: HTTPS doesn't work throught proxy
Hi,
When you indicate you closed that bug, are you talking about this very one ?
Thanks
Guillaume SUEUR
03:26 AM Bug report #10134: Credential Dialog, disabling default Realm information messages that discloses...
F B wrote:
> What do you mean by not storing the password, can you give an example? (is it what I do when I set the p...
Jürgen Fischer
02:40 AM Bug report #10134: Credential Dialog, disabling default Realm information messages that discloses...
In the example above I do use QgsCredentials.instance().
I think I do most of the things that you propose. Here is a ...
F B
02:29 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
If you don't want to have the password visible you shouldn't store it.
QgsCredentialDialog isn't supposed to be run d...
Jürgen Fischer
02:29 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
If you don't want to have the password visible you shouldn't store it.
QgsCredentialDialog isn't supposed to be run d...
Jürgen Fischer
02:29 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
If you don't want to have the password visible you shouldn't store it.
QgsCredentialDialog isn't supposed to be run d...
Jürgen Fischer
02:29 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
If you don't want to have the password visible you shouldn't store it.
QgsCredentialDialog isn't supposed to be run d...
Jürgen Fischer
02:29 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
If you don't want to have the password visible you shouldn't store it.
QgsCredentialDialog isn't supposed to be run d...
Jürgen Fischer

2014-04-29

01:34 PM Bug report #10140 (Closed): no dropdown in Vector>Research>Random Points>Use value from input field
Trying to generate a dot map, using the Random Points feature and an input column to control the number of points, I ... Paul Ramsey
12:36 PM Bug report #10040: singleparts to multipart fails (python error)
Seems to be fixed in https://issues.qgis.org/projects/quantum-gis/repository/revisions/23900ba55d761fc24f4f4a4ef29636... dr -
05:36 AM Bug report #10139 (Rejected): Saving queries option missing?
In previous versions (up to 1.8, I believe) it was possible to save queries in a .qpf file. Now this possibility seem... Paolo Cavallini
05:15 AM Bug report #10138 (Closed): Crash in svg cache with svg symbols
When you open a qpt realized with a scalebar inside, the scale may crash QGIS. In more cases this happen from a versi... Luca Mandolesi
05:11 AM Bug report #10137 (Open): Processing stripping out +towgs params
Apparently Processing, during the analyses starting from layers in a CRS with +towgs parameters (e.g. 23030) creates ... Paolo Cavallini
05:10 AM Feature request #10136 (Closed): Processing: set a more sensible default resolution for GRASS
The default resolution for GRASS is now 1, which is often too high, and causes many modules to stall for a long perio... Paolo Cavallini
05:08 AM Bug report #10131: Incomplete srs.db in qgis 2.2
Here is the content of my postinstall.log, it seems the install path wasn't recognized (maybe due to the blank space)... Jean-Roc Morreale
04:47 AM Bug report #10131 (Feedback): Incomplete srs.db in qgis 2.2
Not reproducable:... Jürgen Fischer
02:43 AM Bug report #10131 (Closed): Incomplete srs.db in qgis 2.2
Hi,
I'm preparing a deployment of qgis 2.2 using the OSGEO4W standalone installer and I noticed that there is many m...
Jean-Roc Morreale
04:50 AM Feature request #10135 (Closed): Add a tool to remove isolated lines
People from the Technical University Delft have created an automated way for: "Validation and Automatic Repair of Pla... Paolo Cavallini
04:38 AM Bug report #10134 (Rejected): Credential Dialog, disabling default Realm information messages tha...
I'm using the QgsCredentialDialog for determining user access to the database. When a user is failing to log in corre... F B
04:31 AM Feature request #10133 (Closed): Reccommendation for plugin writers: customization menu
From Radim comments.
Customization only works for objects with objectName. objectName is automatically set by Qt for...
Paolo Cavallini
03:55 AM Bug report #10132 (Closed): SVG markers aren't rendered properly when exported through QGIS composer
SVG markers aren't rendered properly when exported through QGIS composer, failing to take into account the DPI values... Mathieu Pellerin - nIRV

2014-04-28

01:53 AM Bug report #10104: new identification mode selection not working as expected
Ok I think we can solve this by doing the same thing as the legend. The first load will show it but after that it do... Nathan Woodrow
01:43 AM Bug report #10104: new identification mode selection not working as expected
For the bug:
1. set the mode to layer selection
2. hide the dock
3. identify
-> the mode came back to current layer
...
Denis Rouzaud
01:38 AM Bug report #10104: new identification mode selection not working as expected
I will take a look tonight.
The current behavior is correct, hence why I changed it. The old method is way to incons...
Nathan Woodrow
01:09 AM Bug report #10104 (Reopened): new identification mode selection not working as expected
If you hide the dock, and use identify map tool, the selection mode is not kept and is set again to current layer.
A...
Denis Rouzaud
03:23 PM Bug report #10130 (Closed): updating display when file based layer change (external to qgis).
Not sure whether this should be viewed as a bug or a feature request.
I have a number of file based layers that ar...
John Floyd -
01:02 PM Bug report #8785: Style file not saved in Win 8
I'm seeing the same bug. Windows 8, saving to a local drive. The mouse pointer briefly changes to the Windows 8 "busy... Brian Syme
09:59 AM Bug report #10127: Randomly crash after a while
it's a pleasure Luigi Pirelli
06:57 AM Bug report #10127: Randomly crash after a while
In the end I was able to replicate a crash with two layers from two different spatialite databases on project load. T... Martin Dobias
06:55 AM Bug report #10127 (Closed): Randomly crash after a while
Fixed in changeset commit:"dd739ef7363303e30981213d8eca99e7d65f9127". Martin Dobias
06:10 AM Bug report #10127: Randomly crash after a while
added debug messages... i tried
1) with serial rendering... no crash
2) with parallel rendering... no crash using fo...
Luigi Pirelli
04:05 AM Bug report #10127: Randomly crash after a while
I'm not able to understand steps to reproduce the error... happends again after I posted the tiket and I tried to rep... Luigi Pirelli
03:55 AM Bug report #10127: Randomly crash after a while
Hi Luigi
that is really quite strange. When a connection is being released back to connection pool, its group should...
Martin Dobias
03:26 AM Bug report #10127 (Closed): Randomly crash after a while
Hi I'm experiencing randomly crashes so I decided to start qgis with gdb to trace the error
I'm on a udpated debian ...
Luigi Pirelli
06:40 AM Bug report #8656: WMS GetFeatureInfo Filter: No results
I can confirm Carl's experience:
Using Debian package qgis-mapserver 2.2.0-1, I get a response for a getfeatureinfo ...
mlennert -
06:13 AM Feature request #8842: Pull request submitted to add GEOS single sided buffer operation to QgsGeo...
The new pull request, with test, is https://github.com/qgis/QGIS/pull/1330 Giovanni Allegri
05:32 AM Bug report #10128 (Closed): small bug in example script Extract_raster_values_to_shapefile.py and...
Hi guys,
just started working with QGIS. Found a small bug in the example scripts. Not sure where to submit it.
In ...
Sven Briels
05:26 AM Bug report #9656 (Closed): Scroll bar missing from python log messages.
Fixed in changeset commit:"7581370b35cbfc11b4e2485cfc4c1d3383d22205". Salvatore Larosa
03:20 AM Feature request #7886 (Closed): qgis composer image item size should match image size
Fixed in changeset commit:"23b660ec74229c5ec12f92a1376a8ea3e715e13e". Nyall Dawson

2014-04-27

01:03 AM Bug report #10116: Oracle Provider feature count grabs whole table data
Hello,
after using Debugview (under MS-Windows) and a little bit more Wireshark, I can see that featureCount method ...
Médéric RIBREUX
07:17 PM Feature request #10124 (Open): take advantage of gdal's vsipreload mechanism to support VSIFILE o...
More details on vsipreload and why it would be a good thing to have it inside QGIS
http://osgeo-org.1560.x6.nabble.c...
Etienne Tourigny

2014-04-26

01:13 AM Bug report #9034: Symbol not visible in TOC when size is set in data defined properties
I also just encountered this problem in 2.2 and master. Tudor Bărăscu
08:26 AM Bug report #10080: Model does not show up in toolbox due to erroneous "Error in algorithm name"
This is getting ridiculous.
I cannot add any models. I cannot reference any models. Every model that I add that re...
Thomas Horner
07:07 AM Bug report #10120: Spatialite connections missing from DB manager on QGIS master on Linux
Also on windows
OSGeo4W Installer shows, that the lib "pyspatialite" is installed.
Gerhard Spieles
03:56 AM Bug report #10120 (Closed): Spatialite connections missing from DB manager on QGIS master on Linux
On ubuntu precise and QGIS master, using the ubuntugis and nigthly build repos, in DB manager the icon/connections fo... Giovanni Manghi

2014-04-25

01:04 PM Bug report #10119 (Closed): QGIS master freezes when layer in project is removed from the database
subject says it all, it wasn't an issue in previous qgis versions (like 1.8) where error messages where logged, but t... Giovanni Manghi
11:58 AM Feature request #10118 (Closed): On the raster "save as" the "layer extent" should be computed au...
On the raster "save as" panel the user has to press "layer extent" for QGIS to read the raster extent. If this is not... Filipe Dias
11:51 AM Bug report #10111 (Closed): "Save as" is not working with rasters
It wasnt working because I hadnt pressed the "layer extent" button. I don't think this is the right behaviour from th... Filipe Dias
11:36 AM Bug report #10111: "Save as" is not working with rasters
Filipe Dias wrote:
> "Create vrt" was not activated. I'm attaching a sample raster. Just try to do "save as".
then i...
Giovanni Manghi
11:34 AM Bug report #10111: "Save as" is not working with rasters
"Create vrt" was not activated. I'm attaching a sample raster. Just try to do "save as". Filipe Dias
11:18 AM Bug report #10111 (Feedback): "Save as" is not working with rasters
Hi Filipe,
I cannot confirm.
If you are asked to choose a folder as output, then it means that the "create vrt" op...
Giovanni Manghi
11:04 AM Feature request #7581: raster calculator really needs support for conditional statements (to allo...
I agree. For example, we could use full expression syntax, such as... Michael Douchin
08:07 AM Feature request #10117 (Open): Raster, Properties, Style, Singleband psuedocolor, Mode
There are only two current modes available: continuous, equal interval. Need to add the following modes (that are alr... Ron Filion
07:56 AM Bug report #10116 (Closed): Oracle Provider feature count grabs whole table data
Hello,
When I check the "Show Feature Count" checkbox, QGis 2.2 sends this query to do the count:
SELECT "FIELD...
Médéric RIBREUX
07:36 AM Bug report #10101: User CRS created when selecting South African CRS : HBK_NO_23 as a CRS for a n...
Related: http://gis.stackexchange.com/questions/90339/why-are-some-layers-saved-with-custom-crs-while-others-use-the-... Andre Joost
05:39 AM Bug report #10040: singleparts to multipart fails (python error)
Yes, same issue. Andrey Isakov
02:00 AM Bug report #9369: "duplicate layer" takes ages to duplicate spatialite layers
Can it be Yet Another incarnation of the problem of changing SpatiaLite version? The behaviour has changed, and now i... Paolo Cavallini

2014-04-24

01:17 AM Bug report #10115 (Closed): columns with a "%" in their name can cause crash and/or problems with...
*new description:*
If a column of a joined table has a "%" in its name, using it for the symbology can lead to wrong ...
Dave Morgan
10:18 AM Bug report #10113 (Closed): Processing/GRASS v.select error in file description
Fixed in changeset commit:"a1d43ff2a3da0f939d2ce4d45cbaa6ad9f3426be". Victor Olaya
09:18 AM Bug report #10113 (Closed): Processing/GRASS v.select error in file description
The ~\\.qgis2\\python\\plugins\\processing\\grass\\description\\v.select.txt file is missing an 's' in line 8. It sho... Diogo Vasconcelos
07:41 AM Bug report #10045: Error upon upgrading Processing (possibly other complex plugins)
i've just triede to upgrade the processing plugin ...
-- didn't have any problems on win 7 + qgis 2.2.0 (c3a2817)
bu...
robert kalasek
05:02 AM Bug report #10112 (Closed): QGIS graduated point style rounding error
I have a strange problem in QGIS 2.2 (problem is also present in QGIS 2.1). When I add a point (shapefile) layer, app... Zoran Petrovic
02:53 AM Bug report #10111 (Closed): "Save as" is not working with rasters
Steps to reproduce:
Add a raster
Save as
Select a destination folder
Press OK
Dialog closes but no raster was saved
Filipe Dias

2014-04-23

01:43 AM Bug report #10106: Panning a non-cached WFS layer causes selection to change
seems a regression to me. Please lower the priority if I'm wrong. Giovanni Manghi
01:43 AM Bug report #10106: Panning a non-cached WFS layer causes selection to change
seems a regression to me. Please lower the priority if I'm wrong. Giovanni Manghi
09:12 AM Bug report #10106 (Closed): Panning a non-cached WFS layer causes selection to change
When a layer is added in from a WFS server and it is not cached, if a selection is made and then the map is panned th... Heikki Vesanto
12:58 AM Bug report #9369: "duplicate layer" takes ages to duplicate spatialite layers
Hi, I confirm the issue. It occurs for large projects only after having worked for a while.
Really hard to reproduce...
Regis Haubourg
08:27 PM Bug report #10109 (Closed): centroid fill's svg marker are wrongly sized when exporting to image ...
Long story short, it seems centroid fill's svg marker fail to take factor in the DPI value when exported to image via... Mathieu Pellerin - nIRV
07:09 PM Feature request #3481: Enhancement: Options to stretch labels
>- either by specifying the spacing distance, or by automatically spacing to "fill" the length of the polygon or poly... Alister Hood
05:14 PM Feature request #3808 (Closed): get rid of annoying svg messages
Some cleanup work on the svgs also fixed the offending ones of this.
> But it seems very strange to me that these me...
Alister Hood
05:14 PM Feature request #3808 (Closed): get rid of annoying svg messages
Some cleanup work on the svgs also fixed the offending ones of this.
> But it seems very strange to me that these me...
Alister Hood
04:52 PM Feature request #4055: Enhancement: display SVG symbols in themed collections instead of all toge...
Actually, this shouldn't be closed, because it is only implemented for selecting svgs for layer symbols. If you want... Alister Hood
02:54 PM Feature request #4055: Enhancement: display SVG symbols in themed collections instead of all toge...
I agree this ticket should be closed as it works like SVG Groups Antonio Locandro
04:42 PM Bug report #4056: when built-in SVGs are added to a composer layout paths should be relative to t...
> When a built in SVG is added to a composer layout using the "add image" button, the path to the SVG is currently st... Alister Hood
04:30 PM Bug report #7935: SVG paths still absolute if project set to use relative paths
Oh, I see. If the svg is in the QGIS install directory (on my system /usr/share/qgis/svg) or the user's directory (~... Alister Hood
04:10 PM Bug report #7935: SVG paths still absolute if project set to use relative paths
Doesn't look like it to me, although I haven't tested with a custom svg path:
@ <renderer-v2 symbollevels...
Alister Hood
03:08 PM Bug report #7935: SVG paths still absolute if project set to use relative paths
Is this behaviour still present in master? Antonio Locandro
03:10 PM Bug report #5305: svg fill symbols are presented in a wrong way
Is this still happening in latest master? I can't confirm now Antonio Locandro
03:07 PM Feature request #7981: Add SVG symbol sets
When will this iconset be merged? I think it would be nice to expand the current symbols available. Although I agree ... Antonio Locandro
03:04 PM Feature request #8711: Please add decent North arrows
Ok so I needed North Arrows and came back to this post where I was suppose to work on some.. anyway just to update I ... Antonio Locandro
02:10 PM Bug report #10107 (Closed): OGR vector layer w/ protocol GeoJSON vanishes and gives OGR Error 4 w...
These are the steps to reproduce the error:
1. Add "New Vector Layer..." with protocol GeoJSON (= OGRGeoJSON, set to...
Sfkeller -
01:14 PM Bug report #10045: Error upon upgrading Processing (possibly other complex plugins)
Has anybody observed this problem with other plugins? Borys Jurgiel
09:27 AM Bug report #10045: Error upon upgrading Processing (possibly other complex plugins)
Please let me know next time when the bug is reproductable. Borys Jurgiel
11:24 AM Bug report #10044: OSM Polygons not rendering
An update on this issue.
The fix above, while it seems to work at first, has a major problem. If the ANALYZE stateme...
Joao Paulouro
07:12 AM Bug report #10105 (Rejected): How to sent coordinates in the right projection to PostGIS
Hello everyone,
When editing a PostGIS table in QGIS I face a "little" problem.
If you force a bad projection (in fa...
Mathieu Bossaert
06:08 AM Bug report #10029 (Closed): measure tool poor marker visibility
Fixed in changeset commit:"3a726b60858402402be1a6685371123d17412043". Anonymous
05:49 AM Bug report #10104 (Closed): new identification mode selection not working as expected
Fixed in commit:4fa33900
The options have been removed from the dialog as it doesn't make sense to have it in two pl...
Nathan Woodrow
05:49 AM Bug report #10104 (Closed): new identification mode selection not working as expected
Fixed in commit:4fa33900
The options have been removed from the dialog as it doesn't make sense to have it in two pl...
Nathan Woodrow

2014-04-22

01:56 AM Bug report #10030 (Closed): count points in polygon results a real number (should be an integer)
Jürgen Fischer
12:53 AM Bug report #10030: count points in polygon results a real number (should be an integer)
I think that this issue can be closed, commit:48b9ccbc692122b490a4a2cb692d3f04f6a1202e fixes it.
Alvaro Huarte
12:53 AM Bug report #10030: count points in polygon results a real number (should be an integer)
I think that this issue can be closed, commit:48b9ccbc692122b490a4a2cb692d3f04f6a1202e fixes it.
Alvaro Huarte
01:55 AM Bug report #10104: new identification mode selection not working as expected
No I mean in the context menu in layer selection mode. So you don't need to look in the dock at all, even if several ... Denis Rouzaud
01:48 AM Bug report #10104: new identification mode selection not working as expected
That is already the way it works. It's a tree with layer and feature items. Nathan Woodrow
01:24 AM Bug report #10104: new identification mode selection not working as expected
OK.
If always shown, I think we should modify a bit the layer selection mode. We should provide a sub-level in the m...
Denis Rouzaud
11:04 PM Bug report #10104: new identification mode selection not working as expected
Ok that is just a settings sync issue. No worries. I will fix it this week.
Personally I think the dock should be s...
Nathan Woodrow
10:18 PM Bug report #10104 (Closed): new identification mode selection not working as expected
The selection of the identification mode in the options is not effective. The dock is still shown, and apparently ove... Denis Rouzaud
12:32 AM Bug report #8438 (Closed): WMT-S Crashes when loading layer
Jürgen Fischer
04:10 PM Bug report #8438: WMT-S Crashes when loading layer
Hi Jürgen this can be closed now. It's no longer a problem in master. Jeremy Palmer
08:17 AM Bug report #10103 (Closed): QGIS issue with 64bit uninstaller dialog
We've got both the 32 and 64bit versions of the weekly (from http://www.qgis.org/downloads/weekly/ ) - our IT departm... Jonathan Moules
06:59 AM Bug report #10102 (Closed): Cannot add varchar2 and char attributes in Oracle layers
Hello,
In QGis 2.2, it is impossible to add varchar2 or char attributes on an Oracle layer. When I try to do it, the...
Médéric RIBREUX
06:37 AM Bug report #9851 (Reopened): Processing - Toolbox tree view should not collapse when a model is a...
This is happening again, at least with R scripts. Filipe Dias
04:58 AM Bug report #10101: User CRS created when selecting South African CRS : HBK_NO_23 as a CRS for a n...
This problem also affects QGIS Master on Ubuntu 14.04 - checked on 2014-04-19. Frank Sokolic
03:27 AM Bug report #10101 (Closed): User CRS created when selecting South African CRS : HBK_NO_23 as a CR...
When selecting South African CRS : HBK_NO_23 as the CRS for a new shapefile, QGIS creates slightlly different QPJ and... pinghanling -
04:18 AM Bug report #10100 (Closed): identify: crash when using layer selection
already fixed in commit:071ec82 Jürgen Fischer
04:18 AM Bug report #10100 (Closed): identify: crash when using layer selection
already fixed in commit:071ec82 Jürgen Fischer

2014-04-21

12:40 AM Bug report #10100 (Closed): identify: crash when using layer selection
when using layer selection mode, if you change the selected layer, QGIS crashes.
the crash occurs in QgsMapToolIdenti...
Denis Rouzaud
 

Also available in: Atom