Activity

From 2012-10-29 to 2012-11-27

2012-11-27

08:47 PM Bug report #6775 (Closed): The values of a field created with field calculator (float) are rounde...
While it seems a bit strange this is the correct behavior. The expression engine in master, which is different to 1.... Nathan Woodrow
08:47 PM Bug report #6775 (Closed): The values of a field created with field calculator (float) are rounde...
While it seems a bit strange this is the correct behavior. The expression engine in master, which is different to 1.... Nathan Woodrow
02:49 PM Bug report #6775 (Closed): The values of a field created with field calculator (float) are rounde...
I have table with two fields with the exact same values (1 through 25). Field1 is an integer and Field 2 is a float. ... Filipe Dias
08:35 PM Bug report #6763: Labels don't wrap around 90 degree bend
Larry Shaffer wrote:
> Note: the above commit addresses the wrapping issue, but not the alignment of the label (i.e.,...
Alister Hood
05:50 PM Bug report #6763: Labels don't wrap around 90 degree bend
Note: the above commit addresses the wrapping issue, but not the alignment of the label (i.e., have the label centere... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
05:32 PM Bug report #6763 (In Progress): Labels don't wrap around 90 degree bend
The wrapping issue should be addressed with commit commit:ee12df2 'Add option to set inside and outside maximum for d... Larry Shaffer
11:49 AM Bug report #6763: Labels don't wrap around 90 degree bend
Hi Nathan and Martin,
I have implemented this in a feature branch at my forked repo:
https://github.com/dakcarto/Qu...
Larry Shaffer
08:50 AM Bug report #6763 (Feedback): Labels don't wrap around 90 degree bend
Hi Martin,
Since there is now letter and word spacing for curved labels, I think exposing that option, at layer and ...
Larry Shaffer
06:07 AM Bug report #6763: Labels don't wrap around 90 degree bend
There's a constant (max_char_angle_delta in src/core/pal/feature.h) that limits the maximum angle difference allowed ... Martin Dobias
08:30 PM Bug report #6764: --configpath option breaks plugin installer
Good old windows and it use of \\ for paths. Will fix. Nathan Woodrow
07:40 PM Feature request #6757: [Patch] Abort classification upon high number of classes
Merged in commit:9f71d9f Nathan Woodrow
05:44 PM Bug report #2113 (In Progress): curved labels: only a few are drawn
See #6763-6 for update on related issue.
Please test with commit:ee12df2 and _inside_ and _outside_ angles greater...
Larry Shaffer
05:38 PM Feature request #6673 (In Progress): Curved labels : max angle delta between letters
See #6763-6 for update on related issue.
Please test with commit:ee12df2 to see if your labels now can match MapSe...
Larry Shaffer
08:42 AM Feature request #6673: Curved labels : max angle delta between letters
related to #6763 Regis Haubourg
02:43 PM Bug report #6774: Export to PDF changes feature colours
Rendering to SVG or image returns the correct results
!imagevpdf.png!
Nathan Woodrow
02:33 PM Bug report #6774 (Closed): Export to PDF changes feature colours
This seems really strange but for some reason the colours are getting changed when I export my map to PDF using the c... Nathan Woodrow
11:59 AM Bug report #6773 (Closed): execution time
please post questions in the mailing lists, not in the bug tracker. Giovanni Manghi
11:59 AM Bug report #6773 (Closed): execution time
please post questions in the mailing lists, not in the bug tracker. Giovanni Manghi
11:47 AM Bug report #6773 (Closed): execution time
The desktop application doesn't show execution time of a process. How can this information can be accessed? Juan Barrios
10:41 AM Bug report #6772 (Closed): Categorized Style: if column is "character" and too long in PostGIS th...
On creating a categorized style on a layer coming out of PostGIS, the column I select is of a 'character' datatype an... Andrew Bell
08:58 AM Bug report #6769: "search on web" action doesn't display the result page
Fixed for QGis Friendly Courses http://www.qgis.org/en/sponsorship/qgis-friendly-courses.html Giuseppe Sucameli
08:56 AM Bug report #6769 (Closed): "search on web" action doesn't display the result page
Fixed in changeset commit:"8ba6bfb2c6fdf045d2ae0b78f17bcd936f8207d5". Giuseppe Sucameli
08:06 AM Bug report #6769 (Closed): "search on web" action doesn't display the result page
Using the "search on web based on attribute value" doesn't display the result page.
It opens the Google search page,...
Giuseppe Sucameli
07:38 AM Bug report #6448: Extremely slow shapefile reading over network
More info:
- Files on a CIFS LAN (IBM storage M3600 powered by NetApp)
- LAN 100 MBit/s , but 1GBit/s on server side...
Regis Haubourg
05:34 AM Feature request #6768 (Closed): Diagrams: connect Expression builder to attributes and size fields
it would be nice to have the possibility to use expression builder in size field and attribute fields of diagram tab.
Regis Haubourg
05:12 AM Feature request #6767 (Closed): Duplicate bookmark buttons
It seems that now one has about the same functions on both the new bookmark and the navigate bookmarks popups: please... Paolo Cavallini
02:43 AM Bug report #6766 (Closed): region zone error using GRASS plugin
Hello. When I am creating a location based on a raster layer projected in SWEREF99TM (EPSG:3006) which is based on UT... Fredrik Lindberg
01:46 AM Bug report #6765 (Closed): Embed layers and group
When adding a certain layer, I have this (debug)... Denis Rouzaud

2012-11-26

12:49 AM Bug report #6764 (Closed): --configpath option breaks plugin installer
Subject has been discussed previously here [0]
Tested only on Windows (XP and 7)
When starting QGIS with @--configpat...
Regis Haubourg
08:22 PM Bug report #6763: Labels don't wrap around 90 degree bend
Added sample data and fixed images. Nathan Woodrow
08:21 PM Bug report #6763 (Closed): Labels don't wrap around 90 degree bend
Curved labels don't seem to like wrapping around 90 degree corners. See images for examples and an example from MapSe... Nathan Woodrow
09:51 AM Feature request #6762 (Closed): SQL query window
Hi,
QSpatiaLite plugin provides a SQL query window similar to MapInfo. It would be nice to be able to benefit from a...
Marc-André Saia
07:07 AM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
+1 for me, I agree with your analysis, mine was maybe too quickly made. You can go for new dialog for me. Do other u... Regis Haubourg
06:22 AM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Hi Régis,
regis Haubourg wrote:
> ... Is there a way to open dialogs to save edits of all layers being edited? (this...
Larry Shaffer
02:56 AM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Hi Larry , it works! but I got trapped going too fast. The warning dialog may be a bit confusing. It warns you to sav... Regis Haubourg
03:31 AM Bug report #6743: Postgis Manager error when start
Hi Martin,
I already test the new version (0.5.16) of the plugin Postgis Manager and worked fine. Thanks!
Best Reg...
José Santos
01:48 AM Bug report #6501: Crash when joining a shape file to a csv file
Tested with provided data in both join directions and it works
As this works for me I think we could close this (as i...
Werner Macho
01:05 AM Bug report #6758 (Feedback): qgis.exe has stopped working
What operating system? What QGIS version? Did you tried removing any third party plugin, and more in general disablin... Giovanni Manghi

2012-11-25

12:53 AM Bug report #4447 (Closed): basic statistics not available for joined attributes
Alexander Bruy
12:52 AM Feature request #4397 (Closed): (fTools) Check Geometry Validity - Save error messages as new poi...
Added in commit:24e259bdb3 Alexander Bruy
12:52 AM Feature request #4397 (Closed): (fTools) Check Geometry Validity - Save error messages as new poi...
Added in commit:24e259bdb3 Alexander Bruy
05:34 PM Bug report #6758 (Closed): qgis.exe has stopped working
When I exited qgis, I was asked to save and after confirming this, the program crashed reporting: "qgis.exe has stopp... Henk Hofmans
03:18 AM Feature request #6757: [Patch] Abort classification upon high number of classes
I opened a pull request on GitHub https://github.com/qgis/Quantum-GIS/pull/338 … Simon Legner
03:12 AM Feature request #6757 (Closed): [Patch] Abort classification upon high number of classes
Accidentally classifying a vector layer (categorized style) on an id column (with >99k unique entries) resulted in hi... Simon Legner

2012-11-24

07:30 PM Bug report #6692: Heatmap gives no feedback on progress while running
Related: #6691 Aren Cambre
07:29 PM Bug report #6756 (Closed): heatmap plugin is very slow
Coming from #6691, the heatmap plugin is very slow. Running it on a layer with over 700,000 points crashed after 12 h... Aren Cambre
10:02 AM Bug report #6740 (Closed): Rendering in 1.9.0+git20121119+2613cf6~precise1
Ciao Gio,
Thanks for the feedback. In fact I had both repositories in my sources.list, and the apt policy was choosi...
Jorge Rocha
07:42 AM Bug report #6740 (Feedback): Rendering in 1.9.0+git20121119+2613cf6~precise1
Jorge Rocha wrote:
> Attached are two shapefiles.
> The one in EPSG:4326 (Eixos.shp) which does not show at higher zo...
Giovanni Manghi
07:42 AM Bug report #6740 (Feedback): Rendering in 1.9.0+git20121119+2613cf6~precise1
Jorge Rocha wrote:
> Attached are two shapefiles.
> The one in EPSG:4326 (Eixos.shp) which does not show at higher zo...
Giovanni Manghi
07:45 AM Bug report #6723 (Feedback): Multiple selection from table paste into layer crashes QGIS
it works fine here on master, please try qgis-dev/osgeo4w and/or attach sample data. Giovanni Manghi
07:45 AM Bug report #6723 (Feedback): Multiple selection from table paste into layer crashes QGIS
it works fine here on master, please try qgis-dev/osgeo4w and/or attach sample data. Giovanni Manghi

2012-11-23

02:30 PM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Should be fixed (regarding layer edits) with commit commit:21370d9
Attached is warning shown on project close if the...
Larry Shaffer
02:30 PM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Should be fixed (regarding layer edits) with commit commit:21370d9
Attached is warning shown on project close if the...
Larry Shaffer
02:23 PM Bug report #6732 (Closed): No warning on project close action if labels have been moved, but not ...
Should be fixed with commit commit:21370d9
Reopen or start new issue, if needed. Attached is warning shown on projec...
Larry Shaffer
02:23 PM Bug report #6732 (Closed): No warning on project close action if labels have been moved, but not ...
Should be fixed with commit commit:21370d9
Reopen or start new issue, if needed. Attached is warning shown on projec...
Larry Shaffer
02:23 PM Bug report #6732 (Closed): No warning on project close action if labels have been moved, but not ...
Should be fixed with commit commit:21370d9
Reopen or start new issue, if needed. Attached is warning shown on projec...
Larry Shaffer
09:54 AM Feature request #6755 (Closed): Cookie cutter editing
Hi,
It would be very convenient for editing a polygon, to be able to put it in target and cut it with another used as...
Marc-André Saia
09:03 AM Bug report #6746 (Closed): Plugin installation fails when username contains accents
Already a ticket about this #4303. Marc-André Goderre
08:21 AM Bug report #6746 (Feedback): Plugin installation fails when username contains accents
This is a known issue and a ticket about it should already exist. Plese try find it and eventually close this as dupl... Giovanni Manghi
08:21 AM Bug report #6746 (Feedback): Plugin installation fails when username contains accents
This is a known issue and a ticket about it should already exist. Plese try find it and eventually close this as dupl... Giovanni Manghi
07:34 AM Bug report #2596: avoid useless canvas redraws
Another useless redraw: Data is redrawn twice if "option/rendering/feature of feature to draw before updating the di... Regis Haubourg
07:22 AM Feature request #6754 (Open): Add logarithmic distribution to raster symbology
see for example here
http://wiki.gis.com/wiki/index.php/Geometric_Interval_Classification
"This classification ...
Giovanni Manghi
06:58 AM Feature request #6753: Field properties: allow to view multiple lines comment
Here is a screenshot. Actually, QGIS shows two first lines. No way to scroll down.. Regis Haubourg
06:27 AM Feature request #6753 (Open): Field properties: allow to view multiple lines comment
In Layer properties / tab fields : Viewing all lines and not only first line of fields comments would be great help t... Regis Haubourg

2012-11-22

03:55 PM Bug report #6379: HTML output does not work for Processing/GRASS modules
Sorry, I've seen that appear in History and log -> Info, but I think it should, at least, appear in Sextante results ... Pedro Venâncio
03:41 PM Bug report #6379: HTML output does not work for Processing/GRASS modules
What is the result that you obtain? And what are the parameters you employ?
I still do not get results.
I'm on Xubu...
Pedro Venâncio
03:10 PM Bug report #6379: HTML output does not work for Processing/GRASS modules
Can you check again? I just tried and it seemed to work. Filipe Dias
02:36 PM Bug report #6743 (Closed): Postgis Manager error when start
should be fixed in version 0.5.16 Martin Dobias
02:36 PM Bug report #6743 (Closed): Postgis Manager error when start
should be fixed in version 0.5.16 Martin Dobias
02:07 PM Bug report #6743: Postgis Manager error when start
According to the following page, postgis_uses_stats() is not available in PostGIS 2.0:
http://gis.stackexchange.com/q...
Martin Dobias
11:43 AM Feature request #1442: system specific location of qgis settings
I can't either... Borys Jurgiel
07:57 AM Feature request #1442: system specific location of qgis settings
I guess I can't reopen this... maybe an admin, or bug reporter (Borys)? William Kyngesburye
07:56 AM Feature request #1442: system specific location of qgis settings
Been meaning to reopen this. I think this is very important, especially on OS X. As I've said before, --configpath ... William Kyngesburye
07:56 AM Feature request #1442: system specific location of qgis settings
Been meaning to reopen this. I think this is very important, especially on OS X. As I've said before, --configpath ... William Kyngesburye
07:56 AM Feature request #1442: system specific location of qgis settings
Been meaning to reopen this. I think this is very important, especially on OS X. As I've said before, --configpath ... William Kyngesburye
08:57 AM Feature request #4397: (fTools) Check Geometry Validity - Save error messages as new point layer
Hi,
I'll add this feature to branch master ASAP.
Just some tests and I'll send a pull request!
Salvatore Larosa
08:57 AM Feature request #4397: (fTools) Check Geometry Validity - Save error messages as new point layer
Hi,
I'll add this feature to branch master ASAP.
Just some tests and I'll send a pull request!
Salvatore Larosa
05:43 AM Bug report #6751: Attribute table does not sort properly for GML file
Some further investigation shows another problem. In the included GML file (which is a subset of the first GML file),... Dieter De Paepe
05:20 AM Bug report #6751 (Closed): Attribute table does not sort properly for GML file
I have included a GML file that was produced using the Geotools 1.8.0 java library.
When opening the attribute table ...
Dieter De Paepe
05:26 AM Bug report #6083: Corrupt datastore upon edit
I am unsure if the "Feedback" status relates to me or not...
In any case, I do not have an environment set up to test...
Dieter De Paepe
03:05 AM Bug report #6742: Sextante 1.08 error
Ok thanks for the information.
I just post here because was the Sextante Plugin to QGIS and probably more people wi...
José Santos
02:51 AM Bug report #6742 (Closed): Sextante 1.08 error
Ok, then I close this ticket.
BTW, please open SEXTANTE-related tickets in "SEXTANTE bugtracker":https://issues.qgis...
Alexander Bruy
02:51 AM Bug report #6742 (Closed): Sextante 1.08 error
Ok, then I close this ticket.
BTW, please open SEXTANTE-related tickets in "SEXTANTE bugtracker":https://issues.qgis...
Alexander Bruy
02:47 AM Bug report #6742: Sextante 1.08 error
Hi, I already solve the problem. I have to uninstall the Sextante and then install again. After that works good.
Re...
José Santos

2012-11-21

01:26 PM Bug report #6747 (Closed): split feature fails on a closed line
Create a closed line loop using snapping that starts and finishes on the same point.
Split that line, and the beginn...
John Floyd -
10:58 AM Bug report #6746 (Closed): Plugin installation fails when username contains accents
Following the installation of QGIS, I wanted to install additional extansion. The extension is installed correctly, b... Marc-André Goderre
07:18 AM Bug report #6743 (Closed): Postgis Manager error when start
Dear Martin,
When I start my Postgis Manager I get this error:
Traceback (most recent call last):
File "C:/Users...
José Santos
07:15 AM Bug report #6742 (Closed): Sextante 1.08 error
Dear Victor,
I try to upgrade the new version of Sextante but says that is a error on the phyton. Also happen on LI...
José Santos
06:38 AM Bug report #6741 (Closed): ATLAS produces wrong output
Exporting Layout with Atlas produces wrong results:
- exporting with raster option (tested 300dpi) produces pdf docu...
Alessandro Ciali
06:12 AM Bug report #6735: Changes in table attribute causes "Invalid Field Index" error when trying to save
I had the chance to try in a 1.7.0 Installation. The problem was not replicable, as in 1.7 was not possible to delete... Alexandre Neto
05:02 AM Feature request #1841: horizontal legends
Also space between columns is now optional in commit:e029bc7 Radim Blazek
04:45 AM Feature request #1841: horizontal legends
Significantly rewritten in commit:86c21184:
* division of layers into columns is using simple heuristic so that it i...
Radim Blazek
02:25 AM Bug report #6740: Rendering in 1.9.0+git20121119+2613cf6~precise1
Attached are two shapefiles.
The one in EPSG:4326 (Eixos.shp) which does not show at higher zoom levels.
The other (v...
Jorge Rocha
02:19 AM Bug report #6740 (Closed): Rendering in 1.9.0+git20121119+2613cf6~precise1
Since around November 6th (not sure), the rendering of certain line shapefiles is only working at some zoom levels.
T...
Jorge Rocha

2012-11-20

11:07 PM Feature request #6605: Image not exported to PDF
Are there any hints how to get the logo (picture) into a pdf?
Michael
Michael Rembe
08:43 PM Bug report #6732: No warning on project close action if labels have been moved, but not saved
Better implementation here:
https://github.com/qgis/Quantum-GIS/pull/334
Larry Shaffer
05:43 PM Bug report #6732 (Feedback): No warning on project close action if labels have been moved, but no...
Hi,
I have implemented a version of this here:
https://github.com/qgis/Quantum-GIS/pull/333
'Add option to warn on ...
Larry Shaffer
01:40 AM Bug report #6732 (Closed): No warning on project close action if labels have been moved, but not ...
Hi,
somewhat related to #6729, but not exactly. When moving a label with 'data defined labeling', no warning is rais...
Regis Haubourg
08:43 PM Bug report #6054 (Feedback): QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Better implementation here:
https://github.com/qgis/Quantum-GIS/pull/334
Larry Shaffer
05:36 PM Bug report #6054: QGIS 1.8 doesn't warn about unsaved changes in layers on exit anymore
Hi,
I have implemented a version of this here:
https://github.com/qgis/Quantum-GIS/pull/333
'Add option to warn on ...
Larry Shaffer
02:47 PM Feature request #3485 (Closed): Add WCS support
WCS client is now in master (Radim's work). Martin Dobias
02:47 PM Feature request #3485 (Closed): Add WCS support
WCS client is now in master (Radim's work). Martin Dobias
02:47 PM Feature request #3485 (Closed): Add WCS support
WCS client is now in master (Radim's work). Martin Dobias
02:47 PM Feature request #3485 (Closed): Add WCS support
WCS client is now in master (Radim's work). Martin Dobias
02:42 PM Feature request #3229 (Closed): NEW Symbology - Possibility to add saved styles to a group
Grouping is now possible in master (thanks to Arun's GSoC work) Martin Dobias
02:42 PM Feature request #3229 (Closed): NEW Symbology - Possibility to add saved styles to a group
Grouping is now possible in master (thanks to Arun's GSoC work) Martin Dobias
02:42 PM Feature request #3229 (Closed): NEW Symbology - Possibility to add saved styles to a group
Grouping is now possible in master (thanks to Arun's GSoC work) Martin Dobias
02:42 PM Feature request #3229 (Closed): NEW Symbology - Possibility to add saved styles to a group
Grouping is now possible in master (thanks to Arun's GSoC work) Martin Dobias
02:42 PM Feature request #3229 (Closed): NEW Symbology - Possibility to add saved styles to a group
Grouping is now possible in master (thanks to Arun's GSoC work) Martin Dobias
02:24 PM Feature request #1066 (Closed): Use separate categories/folder for SVG symbols in vector symbology
SVG symbols are now accessible from their folders (thanks to Arun's GSoC work). Martin Dobias
02:24 PM Feature request #1066 (Closed): Use separate categories/folder for SVG symbols in vector symbology
SVG symbols are now accessible from their folders (thanks to Arun's GSoC work). Martin Dobias
02:24 PM Feature request #1066 (Closed): Use separate categories/folder for SVG symbols in vector symbology
SVG symbols are now accessible from their folders (thanks to Arun's GSoC work). Martin Dobias
10:16 AM Feature request #6174: Document that "Simplify tolerance" set to 0 works to remove duplicate nodes
I have a dataset which QGIS geometry validity check is telling me has duplicate nodes/vertices - and using the "Simpl... joe larson
05:22 AM Bug report #6735: Changes in table attribute causes "Invalid Field Index" error when trying to save
Giovanni Manghi wrote:
> Hi Alexandre, does this happen also on master or 1.7.4 (looking for a possible fix/regressi...
Andre Joost
03:08 AM Bug report #6735: Changes in table attribute causes "Invalid Field Index" error when trying to save
Alexandre Neto wrote:
> I have tried in Xubuntu (OSGEO Live 6) and the same issue occurs.
Hi Alexandre, does this h...
Giovanni Manghi
03:07 AM Bug report #6735: Changes in table attribute causes "Invalid Field Index" error when trying to save
I have tried in Xubuntu (OSGEO Live 6) and the same issue occurs. Alexandre Neto
02:44 AM Bug report #6735 (Closed): Changes in table attribute causes "Invalid Field Index" error when try...
I'm using, QGIS 1.8 6416f38, in a Windows Vista 32bit Machine. Changes in table attribute causes "Invalid Field Index... Alexandre Neto
05:09 AM Bug report #6585: <img> does not work in html map tips?
I've tried Giovanni's code and the image also doesn't show. However it works on local images:
With the code (for the ...
Rui Pedro Henriques
04:50 AM Bug report #6056: Cannot load WCS layers
just to inform that I had to take the server offline and for now I don't have the possibility to provide a new one. I... Rui Pedro Henriques
04:46 AM Bug report #6739 (Closed): qgis-providers-common segmentation fault on update
Hi,
When trying to update from http://qgis.org/ubuntugis-nightly I get a Segmentation Fault caused by qgis-provider...
Rui Pedro Henriques
04:01 AM Feature request #6736 (Open): Add a writtenProject signal at the end of the project file writing
I've had multiple times the need to post-process a project file, after it has been saved.
In this moment we can only ...
Giovanni Allegri
02:21 AM Bug report #6734 (Closed): First on the list of Recently used CRS not active for newly created layer
Steps to reproduce:
Create new shapefile, _Specify CRS_, try to select first position from _Recently used coordinate...
Milena Nowotarska
01:41 AM Bug report #6733 (Closed): 3D data from MSSQL cannot be read
When QGIS reads a 3D geometry from MSSQL it messes up the coordinates, so resulting QGIS geometry is completely wrong... asgerpetersen -

2012-11-19

12:36 AM Bug report #4850: Labeling engine settings: always defaults values
Thanks Larry! michele zanolli
09:25 PM Bug report #4850 (Closed): Labeling engine settings: always defaults values
Hi,
This should be fixed in master with commit commit:bab4395
Also added ability to remove those settings, and a me...
Larry Shaffer
09:25 PM Bug report #4850 (Closed): Labeling engine settings: always defaults values
Hi,
This should be fixed in master with commit commit:bab4395
Also added ability to remove those settings, and a me...
Larry Shaffer
05:34 PM Feature request #6731 (Closed): r.water.outlet - click to select coordinates
Rather than typing in coordinates to the *easting* and *northing* fields, the user should have the option to click di... Evan Derickson
03:20 PM Bug report #6727: CRS functions are enabled for non-spatial tables
Non-spatial tables also appear in the "layer order" panel, and they even have checkboxes (they do not have checkboxes... Alister Hood
02:55 PM Bug report #6730: Layer properties window expands to much wider than the screen if layer has a ve...
Note that other parts of the gui truncate field names with a "..."
Unfortunately they just truncate the end of the la...
Alister Hood
02:45 PM Bug report #6730: Layer properties window expands to much wider than the screen if layer has a ve...
Oh, another place with the same problem is the Field calculator, due to the drop-down box for selecting an existing f... Alister Hood
02:39 PM Bug report #6730 (Closed): Layer properties window expands to much wider than the screen if layer...
- Load a layer with a very long field name, like the one attached. I think the most likely way you will encounter th... Alister Hood
02:05 PM Bug report #1449 (Reopened): The map and overview canvas resizes incorrectly
Oh sorry, that commit only fixes the problem in the overview. The main canvas is still affected Borys Jurgiel
02:05 PM Bug report #1449 (Reopened): The map and overview canvas resizes incorrectly
Oh sorry, that commit only fixes the problem in the overview. The main canvas is still affected Borys Jurgiel
01:50 PM Bug report #1449 (Closed): The map and overview canvas resizes incorrectly
It's been fixed in commit:2613cf6a Borys Jurgiel
01:50 PM Bug report #1449 (Closed): The map and overview canvas resizes incorrectly
It's been fixed in commit:2613cf6a Borys Jurgiel
01:50 PM Bug report #1449 (Closed): The map and overview canvas resizes incorrectly
It's been fixed in commit:2613cf6a Borys Jurgiel
11:08 AM Feature request #1788: Overview should show extent of overview items, not all project layers
Fixed in commit:2613cf6
Work done by Faunalia for Agence de l'eau Adour Garonne.
Radim Blazek
11:08 AM Feature request #1788: Overview should show extent of overview items, not all project layers
Fixed in commit:2613cf6
Work done by Faunalia for Agence de l'eau Adour Garonne.
Radim Blazek
11:08 AM Feature request #1788: Overview should show extent of overview items, not all project layers
Fixed in commit:2613cf6
Work done by Faunalia for Agence de l'eau Adour Garonne.
Radim Blazek
11:07 AM Feature request #1788 (Closed): Overview should show extent of overview items, not all project la...
Fixed in changeset commit:"2613cf6ad5ec0afcb033e59e60af89384e234f99". Radim Blazek
09:14 AM Bug report #6729 (Closed): Closing project, no save dialog when turned off layers removed
When opening a project, removing a turned off layer or group it, and then exiting QGIS, I'm not prompted whether to s... andskog -
06:20 AM Bug report #6728 (Closed): DBManager: problem with dbf import
When I try to import a .dbf table into postgresql the DBmanager freezing.
The table was correctly created but data...
Luca Lanteri
05:21 AM Feature request #6683: Add duplication option to embed layers/groups dialog
Hi Larry,
do you think having time for this for 2.0? Let us know some of us are really interested! régis
Regis Haubourg
04:55 AM Feature request #1841: horizontal legends
Hi,
Thanks for this.
The problem with the width too small when having only one column seems to be fixed now.
I als...
Andreas Neumann
03:00 AM Bug report #3749: labels out of view for long straight lines
not reproduced on master here. Tested also multineString. Regis Haubourg
02:51 AM Bug report #2949: Labeling (ABC) to a shape file do not show content from dbf field, for objects ...
agreed for me since we keep on discussing it elsewhere. Regis Haubourg
02:49 AM Feature request #6269: Better tokens for text replacement in Print Composer labels
Now that expression is commited in master, I understand that very few things are missing to close this issue. Maybe a... Regis Haubourg
02:42 AM Bug report #5253: labels min scale and max scale display
Not reproduced on master 3398341. Regis Haubourg

2012-11-18

10:39 PM Bug report #6410: expanded layer collapses when clicking on the 'ok' or 'apply' buttons from the ...
Hmm, there's been movement. Using latest qgis-dev windows build (3398341), the unwanted collapse is gone when changin... Mathieu Pellerin - nIRV
05:28 PM Bug report #6727 (Closed): CRS functions are enabled for non-spatial tables
Add this layer: https://issues.qgis.org/attachments/5091/Book1.csv
Right-click on it in the layers list. "Set layer ...
Alister Hood
04:38 PM Bug report #6726 (Closed): Query builder quotes field names with spaces twice; resulting query fails
- Add the attached layer.
- Open the layer's attribute table and click the advanced search button.
- Double-click on ...
Alister Hood
03:55 PM Bug report #6725 (Closed): state of toggle editing button changes even when you click cancel
- edit a vector layer
- click the "toggle editing" button in the main window to toggle editing off
- click "cancel"; ...
Alister Hood
11:48 AM Bug report #6723 (Closed): Multiple selection from table paste into layer crashes QGIS
When multiple features of a layer are selected in the layer using the selection tools and pasted to another layer, QG... Patrick Dunford
08:36 AM Bug report #6608 (In Progress): QGIS crashes when used as WFS client together with QGIS server
The crash is due to MultiPolygon element with coordinates element empty.
I push the correction :
"48270916f5b5b8d8517...
René-Luc ReLuc
05:22 AM Bug report #6608: QGIS crashes when used as WFS client together with QGIS server
It took me another few hours of tests to make further discoveries
about his issue.
* at the beginning I was thinking...
Giovanni Manghi
08:24 AM Feature request #6722 (Open): Add option to create a color ramp symbol in print composer
When creating a layout it would be very useful to have an option that creates an image object representing a the colo... Giovanni Manghi
08:20 AM Bug report #6721 (Closed): Raster legend in TOC does not change (qgis master)
In QGIS master, in the TOC the raster legend does not change once a user does some kind of symbology, and shows just ... Giovanni Manghi
07:13 AM Bug report #6485: QGIS WFS Server GML is not valid
Little update because of a little faut in the code :
> XML Schema has attribute elementFormDefault and not elementFro...
René-Luc ReLuc
05:25 AM Bug report #6302: QGIS WFS Server Geometry Type not recognize by ArcGIS
René-Luc ReLuc wrote:
> This new commit "0ddc034968065046f301d260900d6e9fa46d2ef0":commit:0ddc034968065046f301d260900...
Giovanni Manghi
03:58 AM Feature request #2816 (Closed): Allow class rearrangement in the Layer Properties->Style and in t...
Drag and drop and sorting implemented also for graduated renderer in commit:a1a1fb7be7.
Better drop indicator (line ...
Radim Blazek
03:58 AM Feature request #2816 (Closed): Allow class rearrangement in the Layer Properties->Style and in t...
Drag and drop and sorting implemented also for graduated renderer in commit:a1a1fb7be7.
Better drop indicator (line ...
Radim Blazek

2012-11-17

01:28 PM Bug report #4719: New Labelling, Advanced tab: inactive options?
Hi Anita,
I am currently redesigning the labeling options dialog and will address this issue (and others similar to ...
Larry Shaffer
05:05 AM Bug report #4719: New Labelling, Advanced tab: inactive options?
Switched to blocker because the 2.0 GUI shouldn't contain options that make no sense. Anita Graser
01:00 PM Bug report #4442: Multi line labels render on one line with curved labels
Setting this issue to blocker without any discussion about the difficulty of implementation, and how that relates to ... Larry Shaffer
01:00 PM Bug report #4442: Multi line labels render on one line with curved labels
Setting this issue to blocker without any discussion about the difficulty of implementation, and how that relates to ... Larry Shaffer
01:39 AM Bug report #6704: Legend shows same symbol for all rules when "show feature count" is enabled
> but it doesn't occur with 1.8 on the same machine and with the same user profile.
Oh, it actually seems to work co...
Alister Hood

2012-11-16

12:47 AM Bug report #6704: Legend shows same symbol for all rules when "show feature count" is enabled
Well, I just updated to the latest from OSGeo4w (2ddc753) and it still occurs.
It started quite some time ago (I'm no...
Alister Hood
02:36 AM Bug report #6704: Legend shows same symbol for all rules when "show feature count" is enabled
Hi, I couldn't reproduce in master f210668, OSGEO4W. Regis Haubourg
10:48 PM Bug report #6687: Wrong GPS position
Setting LC_NUMERIC=en_US.utf8 helps.
Parsing of NMEA strings depends strtod() string to double conversion which is...
Tomas Vrana
03:25 PM Bug report #6720 (Closed): Error when saved of geometry with Z Dimension
The attached image shows the error.
From original shapfile it works fine !
I imported the shp into PostGIS by DB Man...
Salvatore Larosa
05:34 AM Bug report #6719 (Closed): Add delimited text plugin: decimal point do not affect numerical field...
The option "decimal point" only affects the fields "lat" and "long" and it will fail if the user try to add a csv dat... Washington Junger
03:21 AM Bug report #6647 (Closed): Combobox text from custom form is not written to feature
Fixed: commit:9183adce9f257a097fc54e5a8a700e4d494b2962 Matthias Kuhn
02:29 AM Bug report #6718 (Closed): Edit button toggle not processed if qgis is busy
Steps to reproduce:
1. Have an _expensive_ layer loaded (a postgis view using a chain of st_buffer with positive and...
Sandro Santilli
02:01 AM Bug report #6698: WMS client and extent request: incomplete symbols
This is not done by the server. It is a client thing. QGIS WMS client exactly requests the WMS extent advertised by t... Marco Hugentobler
02:01 AM Bug report #6698: WMS client and extent request: incomplete symbols
This is not done by the server. It is a client thing. QGIS WMS client exactly requests the WMS extent advertised by t... Marco Hugentobler
01:27 AM Feature request #6717 (Closed): Print composers names
It would be nice to have the possibility to edit the default composer name ('composer #') when creating a new one and... Marie Silvestre
01:11 AM Feature request #6716 (Open): Deleting pyramids externatly built
Is it possible to add a button (or a right-clic) in the pyramids tab of a raster that delete pyramids externaly built... Marie Silvestre
01:09 AM Bug report #6710: QGIS appears to support editing joined tables, but it really does not
No. The important bug is this part:
> You will be able to edit the joined fields and even click "save" without any e...
Alister Hood

2012-11-15

12:57 AM Bug report #6710 (Feedback): QGIS appears to support editing joined tables, but it really does not
Alister Hood wrote:
> Also tested in 1.8
> The only difference is that in 1.8 the table updates when you "save" - you...
Giovanni Manghi
12:45 AM Bug report #6710: QGIS appears to support editing joined tables, but it really does not
Also tested in 1.8
The only difference is that in 1.8 the table updates when you "save" - you don't need to close and...
Alister Hood
08:46 PM Bug report #6710 (Closed): QGIS appears to support editing joined tables, but it really does not
- Join any table A to any table B.
- Open the attribute table for table B and enable editing. You will be able to ed...
Alister Hood
12:43 AM Bug report #6708: "Refine current rules" is enabled when no rules are selected
Also tested in 1.8 Alister Hood
08:23 PM Bug report #6708 (Closed): "Refine current rules" is enabled when no rules are selected
- Style a layer using the rule-based renderer.
- Open the layer properties dialog to the style tab. No rules will be...
Alister Hood
12:42 AM Bug report #6705: Arrow indicates attribute table is sorted by default by the first column. It i...
Also affects 1.8 and probably earlier versions. Alister Hood
07:50 PM Bug report #6705 (Closed): Arrow indicates attribute table is sorted by default by the first colu...
Open the attribute table for a shapefile layer. The arrow in the header of the first column will indicate that the t... Alister Hood
12:40 AM Bug report #6704: Legend shows same symbol for all rules when "show feature count" is enabled
This appears to be a regression since 1.8 Alister Hood
07:39 PM Bug report #6704 (Closed): Legend shows same symbol for all rules when "show feature count" is en...
Style a vector layer with the rule based renderer.
Right-click on the layer and enable "show feature count". All the...
Alister Hood
12:38 AM Bug report #6703: Vector transparency is not reported consistently
Also tested in 1.8 Alister Hood
06:45 PM Bug report #6703 (Closed): Vector transparency is not reported consistently
- Style a vector layer using the rule based renderer
- Right-click on a rule, click "Change transparency", and set it...
Alister Hood
12:37 AM Bug report #6709: Creating a shapefile fails silently when you don't have permissions (should hav...
Also tested in 1.8 Alister Hood
08:31 PM Bug report #6709 (Closed): Creating a shapefile fails silently when you don't have permissions (s...
- Right click on a vector layer and choose "save as". Try to save it somewhere you don't have permissions (often C:/... Alister Hood
12:32 AM Bug report #6712: Strange projection issue - layer is displayed in different location after toggl...
Also tested in 1.8, and it does the same thing. Alister Hood
09:20 PM Bug report #6712 (Closed): Strange projection issue - layer is displayed in different location af...
Open the attached project and enable the overview panel.
Toggle the "Canterbury" layer off and then on again.
Why doe...
Alister Hood
12:28 AM Bug report #6715: attribute table: negative numbers and nulls do not sort as expected
OK, I'm testing in 1.8 now.
This one is the same in 1.8.
Alister Hood
12:23 AM Bug report #6715: attribute table: negative numbers and nulls do not sort as expected
Only master. Alister Hood
12:01 AM Bug report #6715 (Feedback): attribute table: negative numbers and nulls do not sort as expected
in all the tickets you have files lately, the tests have been made on master or qgis 1.8 or both? Giovanni Manghi
11:51 PM Bug report #6715 (Closed): attribute table: negative numbers and nulls do not sort as expected
Load the attached shape file.
Open the attribute table and click on the column header to try to sort by "id".
Click o...
Alister Hood
11:28 PM Bug report #6714 (Closed): Attribute table does not make search results immediately visible
When searching for a single row in the attribute table the results are not automatically shown in the window, but you... Sandro Santilli
09:30 PM Feature request #6713 (Open): Rule based renderer gui enhancements: copy/paste; refine>use expres...
It would be nice if it was possible to:
(1) duplicate an existing rule (maybe it would be best to implement copy and ...
Alister Hood
09:01 PM Feature request #6711 (Open): Use more robust format (e.g. standard csv) when copying features to...
If you copy and paste vector features from QGIS into another program such as a text editor or a spreadsheet, it uses ... Alister Hood
08:17 PM Feature request #6707 (Open): "Save as" - Allow to specify field names when they need to be short...
When doing "save as" with a joined table, the field names are typically truncated a lot. They are also truncated whe... Alister Hood
08:02 PM Feature request #6706 (Open): "View feature form" should be available for the "run feature action...
In the "identify results" window, "view feature form" is listed under the possible actions.
"View feature form" is _...
Alister Hood
12:29 PM Feature request #6676 (Closed): more sophisticated treating with NULL values in label expressions
karpi lastname wrote:
> karpidb3=> \\df concat()
ah, right. Ok, and I see that concat() doesn't return NULL, if the...
Jürgen Fischer
12:29 PM Feature request #6676 (Closed): more sophisticated treating with NULL values in label expressions
karpi lastname wrote:
> karpidb3=> \\df concat()
ah, right. Ok, and I see that concat() doesn't return NULL, if the...
Jürgen Fischer
10:59 AM Feature request #6676: more sophisticated treating with NULL values in label expressions

Hello,
Thanks for your response, it is really feature request more then bug as you explained, but I am confused in ...
karpi lastname
11:32 AM Bug report #6702 (Closed): empty postgis schemas do not show in browser
making impossible to import/move into them a vector. Giovanni Manghi
11:30 AM Bug report #6700 (Closed): refresh button does not work as expected in browser in qgis master
Giovanni Manghi
11:25 AM Bug report #6700 (Closed): refresh button does not work as expected in browser in qgis master
I believe this is a regression, because I don't see this issues in qgis 1.8
There are cases where the refresh button...
Giovanni Manghi
11:28 AM Bug report #6701 (Closed): Browser d&d into a postgis schema other then "public" does not work
D&D of a shape or SL or whatever into a postgis schema other then "public" does not work, as the resulting postgis la... Giovanni Manghi
11:23 AM Bug report #6699: refresh button does not work as expected in browser in qgis master
Just found another case:
if I have an empty postgis schema, this does not show in browser (another bug?).
if I impo...
Giovanni Manghi
11:20 AM Bug report #6699 (Closed): refresh button does not work as expected in browser in qgis master
I believe this is a regression, because I don't see this issues in qgis 1.8
There are cases where the refresh button...
Giovanni Manghi
09:47 AM Bug report #6698 (Closed): WMS client and extent request: incomplete symbols
Pick this WMS server (qgis server)
http://mapserver.uevora.pt/cgi-bin/qgis_mapserv.fcgi?map=/home/mapserver/lserra/l...
Giovanni Manghi
09:20 AM Bug report #6687: Wrong GPS position
Same in 1.9.0 Alpha (git master) Tomas Vrana
07:33 AM Bug report #6687: Wrong GPS position
Actually it seems, that in the live tracking GPS the LAT/LON numbers are just stuck. The don't change at all. Running... Tomas Vrana
07:41 AM Bug report #6697 (Closed): Missing "not" operator
In the raster calculator, there is no "Not" operator to click on. This is a problem because its not clear which of th... Jonathan Moules
06:59 AM Bug report #6696 (Closed): Raster calculator - "in memory raster"
Using raster calculator, I have a simple calculation - (36SK10se@1 + 36SK10se@1) / 2 - If I use all the defaults, se... Jonathan Moules
05:04 AM Bug report #6660: Import and drop table problem
In order to bypass the problem is it possible to open the database with spatialite-gui, delete the table and optimize... Luca Lanteri

2012-11-14

11:13 PM Bug report #6695 (Closed): Contour extraction doe not consider chosen format
In the contour extraction dialog, the chosen format is not taken into account.
It always create shapes!
The _-f form...
Denis Rouzaud
09:42 PM Feature request #4463 (Closed): Missing Large Icon in Ubuntu Package
Duplicated in #6688, where there is probably a better solution Paolo Cavallini
09:42 PM Feature request #4463 (Closed): Missing Large Icon in Ubuntu Package
Duplicated in #6688, where there is probably a better solution Paolo Cavallini
03:00 PM Bug report #2781 (Closed): Relative paths to SvgMarker doesn't work in new symbology
patch applied (commit:149b24c07f058c8dc8d56cad370f522ca31196f7) Martin Dobias
03:00 PM Bug report #2781 (Closed): Relative paths to SvgMarker doesn't work in new symbology
patch applied (commit:149b24c07f058c8dc8d56cad370f522ca31196f7) Martin Dobias
02:48 AM Bug report #2781: Relative paths to SvgMarker doesn't work in new symbology
What about my patch ? Someone to review it ? René-Luc ReLuc
01:54 PM Bug report #6656: PAL labelling performance issue
so, even with a single candidate per feature PAL still computes the number of overlaps for each label.
this count can...
Sandro Santilli
05:31 AM Bug report #6691: Heatmap has memory leak
qgis finally conked out and crashed at about 12.5 hours. Aren Cambre
04:48 AM Bug report #6691 (Closed): Heatmap has memory leak
I have been running a heatmap for 12 hours now on a layer with just over 700,000 points. Except for specifying input ... Aren Cambre
05:27 AM Feature request #5604: Add a "select all classes" button in vector style tab
right click would be fine (common users are not used to use shortcuts), but in any case it would be necessary to docu... Giovanni Manghi
05:24 AM Feature request #5604: Add a "select all classes" button in vector style tab
It is already possible to select everything by using Ctrl-A, a pretty standard shortcut. I think a button for this pu... Leyan Ouyang
04:50 AM Bug report #6692 (Closed): Heatmap gives no feedback on progress while running
When I kick off a heatmap, it gives no status on progress. Instead, qgis just appears to lock up. If this is a long-r... Aren Cambre
04:31 AM Bug report #6690 (Closed): builder query gives wrong results with shapes (OGR bug?)
This came up before - although I can seem to find the ticket.
The layer subset strings (ie. Layer/Query) are provide...
Jürgen Fischer
04:31 AM Bug report #6690 (Closed): builder query gives wrong results with shapes (OGR bug?)
This came up before - although I can seem to find the ticket.
The layer subset strings (ie. Layer/Query) are provide...
Jürgen Fischer
03:29 AM Bug report #6690 (Closed): builder query gives wrong results with shapes (OGR bug?)
if I open the attached shape file in QGIS master ( Compiled against GDAL/OGR 1.9.2 ), I can create the following quer... Richard Duivenvoorde
02:44 AM Bug report #6302: QGIS WFS Server Geometry Type not recognize by ArcGIS
This new commit "0ddc034968065046f301d260900d6e9fa46d2ef0":commit:0ddc034968065046f301d260900d6e9fa46d2ef0 probably s... René-Luc ReLuc
01:08 AM Feature request #6688: Refined and vectorized QGIS logo
+1
I would like to vote to use this new logo, at least until/if we end up getting one professionally done. Having a...
Nathan Woodrow
01:07 AM Feature request #5603: Add support for project files in the QGIS browser
Recent feature request #6685, #6686, #6685 made me think that when qgs will be supported in browser, some right clic ... Regis Haubourg

2012-11-13

11:59 PM Feature request #6688: Refined and vectorized QGIS logo
This is really nice. Maybe for some it won't be a radical enough change from the original but I really like it. I thi... Tim Sutton
11:27 PM Feature request #6688: Refined and vectorized QGIS logo
Lastly, a "current vs proposed" screenshot of logo in a web context. Mathieu Pellerin - nIRV
11:06 PM Feature request #6688: Refined and vectorized QGIS logo
In addition to the above, a refined, vector-based logo would integrate _much_ better with the linux platform, especia... Mathieu Pellerin - nIRV
11:06 PM Feature request #6688: Refined and vectorized QGIS logo
In addition to the above, a refined, vector-based logo would integrate _much_ better with the linux platform, especia... Mathieu Pellerin - nIRV
11:06 PM Feature request #6688: Refined and vectorized QGIS logo
In addition to the above, a refined, vector-based logo would integrate _much_ better with the linux platform, especia... Mathieu Pellerin - nIRV
11:06 PM Feature request #6688: Refined and vectorized QGIS logo
In addition to the above, a refined, vector-based logo would integrate _much_ better with the linux platform, especia... Mathieu Pellerin - nIRV
07:09 PM Feature request #6688: Refined and vectorized QGIS logo
(note: vector logo was created using Inkscape, and would be best viewed / edited using that graphic editor) Mathieu Pellerin - nIRV
06:55 PM Feature request #6688 (Closed): Refined and vectorized QGIS logo
QGIS has done a great lot of good for me and my organization, it's time to try and give back to the project ;)
As ra...
Mathieu Pellerin - nIRV
09:47 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
Hello, my first QGIS post. May I add my thoughts? I was confused by this situation as well. Spent several hours tr... Stuart Smith
02:32 PM Bug report #6687 (Closed): Wrong GPS position
I have a GPS attached to linux machine via gpsd. I have two notebooks with openSuse 12.2 and identical versions of Qg... Tomas Vrana
12:27 PM Bug report #6686 (Closed): Embedded layers from projects with groups misbehaving
When I embed layers from an existing project, I get unusual and incorrect behavior when the embedded project file has... John Tull
12:13 PM Bug report #6685 (Closed): Embedded layers in groups cannot be moved
When embedding layers from an outside project, layers that are not in groups can be re-ordered in the map legend. If ... John Tull
12:08 PM Bug report #6684 (Closed): Embedded layers should not allow rename
Embedded layers from an external qgis project are linked to the project file from which they were imported, dependent... John Tull
11:56 AM Feature request #6683 (Open): Add duplication option to embed layers/groups dialog
As an option to embedding a layer/group, also offer a duplicate function in the dialog. This would be similar to embe... Larry Shaffer
11:30 AM Feature request #6682 (Open): Allow duplication of groups in legend
Currently, the duplicate function of the legend only duplicates layers. A duplication of groups would also be useful.... Larry Shaffer
07:19 AM Feature request #1841: horizontal legends
Multi column support was added (legend Item properties > General > Column count).
Layers are not split, but it would...
Radim Blazek
04:55 AM Bug report #6671 (Closed): QGIS 1.9.0alpha should use geos 3.3
Jürgen Fischer

2012-11-12

05:07 PM Bug report #6681 (Closed): Unnecessary redraw when changing query on unselected layer
If I change the query on an unselected layer, there should be no screen redraw since nothing visible was changed. How... Aren Cambre
02:54 PM Bug report #6476: data defined ellipse symbols on polygon centroid fill
Did a bit more reasearch on this.
On line 177-178 of src/core/symbology-ng/qgssymbolv2.h, which is where the class d...
Julien Lamarche
02:09 PM Bug report #6656: PAL labelling performance issue
I've found that the "Nb overlap" computes the overlap count of each of 3 positions for every point input.
Sandro Santilli
01:17 PM Bug report #5879: running from build directory - no python plugins
Larry, did you file a ticket for the plugin restore issue ? Sandro Santilli
07:38 AM Feature request #6676: more sophisticated treating with NULL values in label expressions
Looks like a feature request. But not sure - which feature is desired: PostGIS doesn't have concat. We have, but... Jürgen Fischer
05:10 AM Feature request #6676 (Closed): more sophisticated treating with NULL values in label expressions
Hello, there is piece from my postgis table:
@karpidb3=> SELECT name, vyska FROM rozhledy_pt WHERE selcol = 1 ;
...
karpi lastname
03:41 AM Feature request #2816 (Open): Allow class rearrangement in the Layer Properties->Style and in the...
Graduated is another renderer. The two renderers do not share this code, the same must be implemented for graduated. Radim Blazek
03:41 AM Feature request #2816 (Open): Allow class rearrangement in the Layer Properties->Style and in the...
Graduated is another renderer. The two renderers do not share this code, the same must be implemented for graduated. Radim Blazek
03:41 AM Feature request #2816 (Open): Allow class rearrangement in the Layer Properties->Style and in the...
Graduated is another renderer. The two renderers do not share this code, the same must be implemented for graduated. Radim Blazek
03:41 AM Feature request #2816 (Open): Allow class rearrangement in the Layer Properties->Style and in the...
Graduated is another renderer. The two renderers do not share this code, the same must be implemented for graduated. Radim Blazek
02:40 AM Feature request #2816: Allow class rearrangement in the Layer Properties->Style and in the Layers...
Hi Radim, nice again, thx!
I couldn't sort legend for graduated numeric legends in revision 6bbe81bb. I reordered c...
Regis Haubourg
02:39 AM Bug report #6675 (Feedback): QgsVectorLayer.featureCount() returns always zero with Python
if it is a regression in master please tag this as blocker. Giovanni Manghi
02:36 AM Bug report #6675 (Closed): QgsVectorLayer.featureCount() returns always zero with Python
The QgsVectorLayer.featureCount() method returns zero with python.
# Load a Postgis layer
# Select layer in legend
#...
zicke -

2012-11-11

05:51 PM Bug report #6593 (Closed): newly added "letter spacing" and "word spacing" label values ignored ...
Kudos Larry, it's working beautifully. Mathieu Pellerin - nIRV
05:51 PM Bug report #6593 (Closed): newly added "letter spacing" and "word spacing" label values ignored ...
Kudos Larry, it's working beautifully. Mathieu Pellerin - nIRV
11:08 AM Feature request #2816: Allow class rearrangement in the Layer Properties->Style and in the Layers...
Implemented drag and drop for selected row(s) and sorting by value (various data types like numbers etc. should be so... Radim Blazek
11:08 AM Feature request #2816: Allow class rearrangement in the Layer Properties->Style and in the Layers...
Implemented drag and drop for selected row(s) and sorting by value (various data types like numbers etc. should be so... Radim Blazek
11:05 AM Feature request #2816 (Closed): Allow class rearrangement in the Layer Properties->Style and in t...
Fixed in changeset commit:"c4b74c9266d48bb864d4c424f87adc8fa940d9bf". Radim Blazek

2012-11-10

01:11 PM Bug report #6624 (Closed): Zonal statistics returns wrong values
Fixed in 8914e7d6ce57ec9a62b5801fd9961cb875b2c657 Marco Hugentobler
06:03 AM Feature request #6674 (Open): Curved labels : option to draw labels even if the line is too short
Hi,
Curved labels are not drawn if the line is too short.
See attached screenshot missing_curved_labels.png:
* brown...
Laurent Gasnier

2012-11-09

11:35 PM Feature request #6673 (Open): Curved labels : max angle delta between letters
Hi,
In new labeling tool, it would be useful for the user to set the value of the max angle delta between letters (l...
Laurent Gasnier
12:30 PM Bug report #5932: Qgis crashes when removing a layergroup
More a workaround. But it works under windows.
Thomas
Thomas Arnold
09:07 AM Feature request #5059 (Closed): Add support for lines in the "dissolve" tool.
Fixed in changeset commit:"6d5bbed3a6bc773034ff1651511e41a5f272ac08". Alexander Bruy
07:38 AM Bug report #6671 (Feedback): QGIS 1.9.0alpha should use geos 3.3
I guess this ticket should be filed in the osgeo4w tracker, not here. Cheers. Giovanni Manghi
07:35 AM Bug report #6671 (Closed): QGIS 1.9.0alpha should use geos 3.3
In some tickets is reported, that new digitizing features (p.E. one sided buffers, prarlell lines etc...) in QGIS-mas... Gerhard Spieles
07:32 AM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
Jürgen Fischer wrote:
> Andre Joost wrote:
> > Indeed an error thrown:
> >
> > [...]
>
> Are you using the latest v...
Andre Joost
07:32 AM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
Jürgen Fischer wrote:
> Andre Joost wrote:
> > Indeed an error thrown:
> >
> > [...]
>
> Are you using the latest v...
Andre Joost
07:32 AM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
Jürgen Fischer wrote:
> Andre Joost wrote:
> > Indeed an error thrown:
> >
> > [...]
>
> Are you using the latest v...
Andre Joost
02:48 AM Bug report #6652 (Reopened): towgs84 parameters for DHDN mixed up
um, I didn't mean to close this. Jürgen Fischer
07:19 AM Feature request #6670 (Open): Add drag and drop from Layer Panel to DBManager
Classical caveeat here, users try to drag and drop data from layer panel.
That would be very user friendly.
All t...
Regis Haubourg
07:15 AM Feature request #6669 (Closed): Display table and fields comments for postgis datasources
Hi,
Users need to understand database contents, so displaying table, views, schema and fields comments would help a...
Regis Haubourg
07:03 AM Bug report #6639 (Reopened): Qgis can not load sextante while starting
Hello, since version 1.9.0alpha, rev 106 (b5a12d3), the sextante module fails again. Popup window reports now:
Konnt...
Gerhard Spieles
05:21 AM Feature request #3430 (Open): fill pattern missing for point markers in new symbology engine
Ooops, status should not be closed Marco Hugentobler
05:20 AM Feature request #3430 (Closed): fill pattern missing for point markers in new symbology engine
Changing to patch supplied -> no, since the accepted parts of the patches have been applied. Marco Hugentobler
05:20 AM Feature request #3430 (Closed): fill pattern missing for point markers in new symbology engine
Changing to patch supplied -> no, since the accepted parts of the patches have been applied. Marco Hugentobler
04:56 AM Bug report #6668 (Closed): Ellipse marker fill color dialog missing the alpha channel
Fixed in changeset commit:"5817ad1c538ef0104c105f6e132548eb97111214". Giuseppe Sucameli
04:19 AM Bug report #6668 (In Progress): Ellipse marker fill color dialog missing the alpha channel
Pull request awaiting approval
https://github.com/qgis/Quantum-GIS/pull/322
Matthias Kuhn
04:19 AM Bug report #6668 (In Progress): Ellipse marker fill color dialog missing the alpha channel
Pull request awaiting approval
https://github.com/qgis/Quantum-GIS/pull/322
Matthias Kuhn
04:19 AM Bug report #6668 (In Progress): Ellipse marker fill color dialog missing the alpha channel
Pull request awaiting approval
https://github.com/qgis/Quantum-GIS/pull/322
Matthias Kuhn
03:49 AM Bug report #6668 (Closed): Ellipse marker fill color dialog missing the alpha channel
... but it is available in the fill color dialog of simple marker symbol. Giovanni Manghi
02:45 AM Feature request #6667 (Closed): save map tips status configuration
Hi, I just figured out that "Map tips" status in not saved anywhere, so that it is always disabled on startup.
Savin...
Regis Haubourg

2012-11-08

11:25 PM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
Andre Joost wrote:
> Indeed an error thrown:
>
> [...]
Are you using the latest version of @osgeo4w-setup.exe@?
Jürgen Fischer
08:02 AM Bug report #6652: towgs84 parameters for DHDN mixed up
Jürgen Fischer wrote:
> Andre Joost wrote:
> Is there an error log somewhere?
>
> @%OSGEO4W_ROOT%\\var\\log\\setup.l...
Andre Joost
10:18 PM Bug report #6645: heathmap plugin: the option to load a layer after analyses should be on by default
The default behaviour is to add to the map canvas. Kindly Refer code here: https://github.com/qgis/Quantum-GIS/blob/m... Arunmozhi P
08:32 AM Bug report #6665 (Closed): Layer grouping bug in legend
Not sure where this may affect functionality beyond the QgsApp::duplicateLayers() method, but...
When using duplicat...
Larry Shaffer
08:16 AM Bug report #6658 (Closed): Segfault duplicating layer
Fixed in commit commit:81f99d6 Larry Shaffer
08:16 AM Bug report #6658 (Closed): Segfault duplicating layer
Fixed in commit commit:81f99d6 Larry Shaffer
07:27 AM Feature request #6664 (Feedback): Add PostGIS Layers dialog stops processing as soon as a user co...
Giovanni Manghi
07:04 AM Feature request #6664: Add PostGIS Layers dialog stops processing as soon as a user confirms a se...
You can stop the search by clicking on the "stop" button (ie. clicking the connect button again) Jürgen Fischer
06:58 AM Feature request #6664 (Closed): Add PostGIS Layers dialog stops processing as soon as a user conf...
Currently, the *PostGIS Layers* dialog can take a long time to be ready to use if it has to process a lot of tables o... Aren Cambre
07:03 AM Feature request #1442: system specific location of qgis settings
I understand you quite well William from a dev point of view. I meant that profile location for qgis uses is not clos... Regis Haubourg
06:33 AM Feature request #1442: system specific location of qgis settings
Not quite the same thing - this ticket is about moving the .qgis folder, not what's in it.
Also, I think that moving...
William Kyngesburye
04:49 AM Feature request #1442: system specific location of qgis settings
Hi all,
I found a good reason to reopen this ticket too. I have directories like *'/sextante' and '.maptplotlib'* t...
Regis Haubourg
06:59 AM Bug report #6615: Add PostGIS Layers hangs in certain cases before its done determining geometry ...
Added as #6664. Aren Cambre
03:57 AM Bug report #6615 (Closed): Add PostGIS Layers hangs in certain cases before its done determining ...
Ok, but then please file a new ticket. Thanks!
> I would still like to request the 2nd option as a feature request...
Giovanni Manghi
03:57 AM Bug report #6615 (Closed): Add PostGIS Layers hangs in certain cases before its done determining ...
Ok, but then please file a new ticket. Thanks!
> I would still like to request the 2nd option as a feature request...
Giovanni Manghi

2012-11-07

12:45 AM Bug report #6652: towgs84 parameters for DHDN mixed up
Andre Joost wrote:
> Eventually,
"Perhaps"?
> So still not sure why not on my Windows7 machine. Is there an error ...
Jürgen Fischer
12:19 AM Bug report #6652: towgs84 parameters for DHDN mixed up
Jürgen Fischer wrote:
> Andre Joost wrote:
> > I got the error both for standalone (1.8.0) and master (C:\\OSGeo4w). ...
Andre Joost
12:09 AM Bug report #6652: towgs84 parameters for DHDN mixed up
Andre Joost wrote:
> I got the error both for standalone (1.8.0) and master (C:\\OSGeo4w). For the second, crssync.ex...
Jürgen Fischer
09:14 PM Bug report #6652 (Reopened): towgs84 parameters for DHDN mixed up
I got the error both for standalone (1.8.0) and master (C:\\OSGeo4w). For the second, crssync.exe in apps\\qgis-dev i... Andre Joost
02:25 PM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
I suppose you're either using the standalone installer without changing install directory to something without blanks... Jürgen Fischer
02:25 PM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
I suppose you're either using the standalone installer without changing install directory to something without blanks... Jürgen Fischer
11:56 AM Bug report #6652 (Closed): towgs84 parameters for DHDN mixed up
Under Settings/Project Settings/Options, I get this proj string for EPSG:31466:... Andre Joost
12:08 AM Bug report #6647 (Resolved): Combobox text from custom form is not written to feature
Matthias Kuhn
12:07 AM Bug report #6647: Combobox text from custom form is not written to feature
Pull request awaiting approval
https://github.com/qgis/Quantum-GIS/pull/320
Matthias Kuhn
05:21 AM Bug report #6647: Combobox text from custom form is not written to feature
I think it's the new QgsAttributeEditor::createAttributeEditor() method. If you got a combobox in your custom featur... zicke -
04:30 AM Bug report #6647: Combobox text from custom form is not written to feature
Can you provide the steps to reproduce this?
An autogenerated form with a Value map works here.
Matthias Kuhn
03:57 AM Bug report #6647 (Feedback): Combobox text from custom form is not written to feature
then is a regression in qgis master? if yes then is a blocker. Giovanni Manghi
03:57 AM Bug report #6647 (Feedback): Combobox text from custom form is not written to feature
then is a regression in qgis master? if yes then is a blocker. Giovanni Manghi
03:55 AM Bug report #6647 (Closed): Combobox text from custom form is not written to feature
When using custom forms with comboboxes, the current text from the combobox is not written/saved to the feature.
This...
zicke -
11:58 PM Bug report #6660 (Closed): Import and drop table problem
Some problem with DBManager plugin during import data from postgres to spatialite.
when I drop a table and I try t...
Luca Lanteri
11:53 PM Bug report #6658: Segfault duplicating layer
This is 100% reproducible for me. Steps:
1. Open a topology with the topoviewer (db_manager)
2. Duplicate the "edge...
Sandro Santilli
04:43 PM Bug report #6658 (Feedback): Segfault duplicating layer
Larry via irc:
> gonna need more info on that duplicate layer ticket. was the layer in a group?
> what was the provi...
Larry Shaffer
02:55 PM Bug report #6658 (Closed): Segfault duplicating layer
A layer which was added to the legend and set to invisible.
Right-click, duplicate layer -> Segfault
Stack trace:
<p...
Sandro Santilli
11:50 PM Bug report #6593 (In Progress): newly added "letter spacing" and "word spacing" label values ign...
@nirvn,
Implemented in commit commit:59fe8fd. Please test.
The solution opted for was a variation on *Fix it in PAL...
Larry Shaffer
11:50 PM Bug report #6593 (In Progress): newly added "letter spacing" and "word spacing" label values ign...
@nirvn,
Implemented in commit commit:59fe8fd. Please test.
The solution opted for was a variation on *Fix it in PAL...
Larry Shaffer
11:50 PM Bug report #6593 (In Progress): newly added "letter spacing" and "word spacing" label values ign...
@nirvn,
Implemented in commit commit:59fe8fd. Please test.
The solution opted for was a variation on *Fix it in PAL...
Larry Shaffer
11:50 PM Bug report #6643 (Closed): Interpolation plugin: the option to load a layer after analyses should...
Fixed in master branch. Marco Hugentobler
08:46 PM Bug report #4673: Rasterizer: let the user choose resolution, not number of rows & columns
See #6659 for an easy solution. Paolo Cavallini
08:46 PM Feature request #6659 (Rejected): gdal_rasterize GUI include the "-tr" option
Duplicate of #4673 Paolo Cavallini
08:46 PM Feature request #6659 (Rejected): gdal_rasterize GUI include the "-tr" option
Duplicate of #4673 Paolo Cavallini
08:20 PM Feature request #6659 (Rejected): gdal_rasterize GUI include the "-tr" option
By exposing -tr option in the GUI, the user can easily define desired pixel resolution.
http://www.gdal.org/gdal_ra...
maning sambale
06:22 PM Bug report #6615: Add PostGIS Layers hangs in certain cases before its done determining geometry ...
It doesn't appear to _completely_ hang with master, but there were still times that the dialog would be unresponsive ... Aren Cambre
04:28 PM Bug report #6656 (Feedback): PAL labelling performance issue
Some slow performance may stem from using the @QPainterPath::addText()@ method of drawing text (creates labels compri... Larry Shaffer
02:43 PM Bug report #6656: PAL labelling performance issue
Test dataset: http://strk.keybit.net/tmp/node.dump
Import in postgis, open the "node" table, apply the node.qml style...
Sandro Santilli
02:40 PM Bug report #6656: PAL labelling performance issue
IMHO PAL has serious performance issues anyway. Paolo Cavallini
02:02 PM Bug report #6656: PAL labelling performance issue
I just retried with the styles in master untouched, and I do can reproduce it.
So steps to reproduce:
1. Click on DB...
Sandro Santilli
01:50 PM Bug report #6656 (Closed): PAL labelling performance issue
I've opened a "topoviewer" project with qgis and it's still haven't finished opening after many minutes.
Attaching gd...
Sandro Santilli
02:23 PM Feature request #6655 (Closed): topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
Ok I took a look and setLayerSet seems to be for _replacing_ the whole layer set. Not something I want to do here.
So...
Sandro Santilli
02:23 PM Feature request #6655 (Closed): topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
Ok I took a look and setLayerSet seems to be for _replacing_ the whole layer set. Not something I want to do here.
So...
Sandro Santilli
02:23 PM Feature request #6655 (Closed): topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
Ok I took a look and setLayerSet seems to be for _replacing_ the whole layer set. Not something I want to do here.
So...
Sandro Santilli
02:12 PM Feature request #6655: topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
Ok one problem was that I did use the setVisibleFlag _before_ adding to legend (for some layers).
This I'm going to f...
Sandro Santilli
02:09 PM Feature request #6655: topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
Those calls are already there. Sandro Santilli
02:05 PM Feature request #6655: topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
How many layers do you load at the same time?
If more than one, consider to set the render flag to false before loadi...
Giuseppe Sucameli
01:47 PM Feature request #6655 (Closed): topoviewer: use QgsMapCanvasLayer to load layers with visibility=off
When loading big topologies qgis still renders the layers as first thing, before we get a chance of setting visibilit... Sandro Santilli
02:23 PM Bug report #5239 (Reopened): TIN interpolation causes crash
Still persists ! (at least under Linux) Salvatore Larosa
02:23 PM Bug report #5239 (Reopened): TIN interpolation causes crash
Still persists ! (at least under Linux) Salvatore Larosa
02:18 PM Bug report #6654: QgsTINInterpolator.interpolatePoints() called from Python console crashes QGIS
I can confirm it !
Related to #5239
Salvatore Larosa
01:38 PM Bug report #6654 (Closed): QgsTINInterpolator.interpolatePoints() called from Python console cras...
Using QgsTINInterpolator.interpolatePoints() from Python console with more than a few points in a dataLayer causes QG... Radek Pasiok
02:03 PM Bug report #6657 (Closed): Easy print ver 0.2.1 reports pyhton error
This is a 3rd party plugin, not part of qgis core, and in absence of the proper tracker (as in this case), issues mus... Giovanni Manghi
02:03 PM Bug report #6657 (Closed): Easy print ver 0.2.1 reports pyhton error
This is a 3rd party plugin, not part of qgis core, and in absence of the proper tracker (as in this case), issues mus... Giovanni Manghi
02:03 PM Bug report #6657 (Closed): Easy print ver 0.2.1 reports pyhton error
This is a 3rd party plugin, not part of qgis core, and in absence of the proper tracker (as in this case), issues mus... Giovanni Manghi
02:00 PM Bug report #6657 (Closed): Easy print ver 0.2.1 reports pyhton error
New version of Easy print reportss follwing errors creating a map:
Fehler bei der Ausführung von Python-Code:
Trace...
Gerhard Spieles
01:18 PM Bug report #6639 (Closed): Qgis can not load sextante while starting
All Ok, it works.
Thank you!
Gerhard
Gerhard Spieles
09:52 AM Bug report #6639 (Feedback): Qgis can not load sextante while starting
Giovanni Manghi
09:46 AM Bug report #6639: Qgis can not load sextante while starting
Hi,
since commit:f410e38 it should work !
Could you give a try and if it is working close the ticket ?
Salvatore Larosa
08:03 AM Feature request #6650 (Open): Layers window, horizontal scrollbar
I think it would be nice to see a horizontal scrollbar in the layers window. Thanks. andskog -
04:10 AM Feature request #6233: add filters for explicitly save in tab or mif in 'save as ' dialog
TAB and MIF formats were separated in format selection combo box.
BTW, I see as a problem that user is not warned ab...
Radim Blazek
03:50 AM Feature request #6233 (Closed): add filters for explicitly save in tab or mif in 'save as ' dialog
Fixed in changeset commit:"fce38c553352be706c3e1eb4865d885b9290c856". Radim Blazek
04:09 AM Feature request #6648 (Open): Warn about all existing files in save as
Vector/raster save as dialog only warns user about file existence of file with 'base' extension. For example, if foo.... Radim Blazek
01:49 AM Bug report #6640: Problem with round function of the expression builder
That's cool you can leave it assigned to me.
It's not a regression as I only added this function after 1.8.
Nathan Woodrow
01:46 AM Bug report #6640 (Feedback): Problem with round function of the expression builder
I agree with Giuseppe, that |number| is the min/max value for integers in a shapfile, so it must be something wrong w... Giovanni Manghi
01:46 AM Bug report #6640 (Feedback): Problem with round function of the expression builder
I agree with Giuseppe, that |number| is the min/max value for integers in a shapfile, so it must be something wrong w... Giovanni Manghi
01:46 AM Bug report #6640 (Feedback): Problem with round function of the expression builder
I agree with Giuseppe, that |number| is the min/max value for integers in a shapfile, so it must be something wrong w... Giovanni Manghi
01:46 AM Bug report #6640 (Feedback): Problem with round function of the expression builder
I agree with Giuseppe, that |number| is the min/max value for integers in a shapfile, so it must be something wrong w... Giovanni Manghi
01:05 AM Bug report #6646: Save style as: second popup after save
I don't know because I'm new in "save style land" Sandro Santilli

2012-11-06

12:53 AM Bug report #6644 (Closed): terrain analysis plugin: the option to load a layer after analyses sho...
Changed in master. Marco Hugentobler
06:11 PM Bug report #6644 (Closed): terrain analysis plugin: the option to load a layer after analyses sho...
The most intuitive behaviour for users is to have the result of an analysis on screen, right after performing it. Not... Paolo Cavallini
12:52 AM Bug report #6646 (Feedback): Save style as: second popup after save
seems a regression, right? Giovanni Manghi
11:44 PM Bug report #6646 (Closed): Save style as: second popup after save
After clicking on "save" in the output filename selection dialog, a new popup appears.
The style _is_ saved, but the ...
Sandro Santilli
12:19 AM Bug report #6582 (Closed): QGIS server displayes text layers only with absolute pathes
Fixed in revision 5f19c6b31923114886fa44a6f99a733acf1f8f19 Marco Hugentobler
11:14 PM Feature request #3402: Feature count when using classifed symbology
regis Haubourg wrote:
> I tested today in ff78ef1. Total feature count seems incorrect,it seems to be minored by 1 al...
Radim Blazek
02:53 AM Feature request #3402: Feature count when using classifed symbology
Hi Radim,
great work all you did around feature count, thanks. I tested today in ff78ef1. Total feature count seems ...
Regis Haubourg
06:11 PM Bug report #6645 (Closed): heathmap plugin: the option to load a layer after analyses should be o...
The most intuitive behaviour for users is to have the result of an analysis on screen, right after performing it. Not... Paolo Cavallini
06:10 PM Bug report #6643 (Closed): Interpolation plugin: the option to load a layer after analyses should...
The most intuitive behaviour for users is to have the result of an analysis on screen, right after performing it. Not... Paolo Cavallini
06:09 PM Bug report #6642 (Closed): fTools: the option to load a layer after analyses should be on by default
The most intuitive behaviour for users is to have the result of an analysis on screen, right after performing it. Not... Paolo Cavallini
06:08 PM Bug report #6641 (Closed): GDALTools: the option to load a layer after analyses should be on by d...
The most intuitive behaviour for users is to have the result of an analysis on screen, right after performing it. Not... Paolo Cavallini
04:35 PM Feature request #4463: Missing Large Icon in Ubuntu Package
I made also a 128x128 icon which looks much better on the Unity menu. Matteo Gismondi
04:34 PM Feature request #4463: Missing Large Icon in Ubuntu Package
I made a 64x64 icon, I don't know if it helps but I hope so. If I knew what to do else I would... Matteo Gismondi
02:55 PM Bug report #6640 (Closed): Problem with round function of the expression builder
I found a strange behavior with round function of the expression builder.
When the round is done to integer, everythi...
Pedro Venâncio
11:17 AM Bug report #6639 (Closed): Qgis can not load sextante while starting
Since Qgis 1.9-0 Alpa, rev. 104 (ff78ef1) sextante module fails while starting QGIS.
Popup window reports:
Konnte E...
Gerhard Spieles
09:17 AM Feature request #6237: Show feature count in composer legend
A new tool button which can switch on/off feature counts in composer legend for selected vector layer was added in Co... Radim Blazek
09:17 AM Feature request #6237: Show feature count in composer legend
A new tool button which can switch on/off feature counts in composer legend for selected vector layer was added in Co... Radim Blazek
09:10 AM Feature request #6237 (Closed): Show feature count in composer legend
Fixed in changeset commit:"038acbc76083dae3fd29795b9e73d97cd92c3d3a". Radim Blazek
07:06 AM Bug report #6638 (Closed): Cannot set custom form with python for vector layer
Since the python bindings for the QgsVectorLayer.setEditorLayout() method are missing, it's now impossible to set a c... zicke -
07:03 AM Bug report #6637 (Closed): View feature form in identify result makes QGIS crash if first attribu...
If the edit widget of the first attribut is set to hidden, QGIS will crash when trying to view the feature form from ... zicke -
07:00 AM Feature request #6575 (Closed): Print the contents of identify windows
aperi2007 - wrote:
> Hi,
>
> I tested it the print is exactly what I need.
>
> One only point.
> The choose to use ...
Jürgen Fischer
05:55 AM Feature request #6575: Print the contents of identify windows
Hi,
I tested it the print is exactly what I need.
One only point.
The choose to use the contextual menu is quite in...
aperi2007 -
03:33 AM Bug report #6636 (Rejected): Latest gdal update leads to crash with mrsid-layer
Duplicate of http://trac.osgeo.org/osgeo4w/ticket/313 Jürgen Fischer
03:33 AM Bug report #6636 (Rejected): Latest gdal update leads to crash with mrsid-layer
Duplicate of http://trac.osgeo.org/osgeo4w/ticket/313 Jürgen Fischer
03:31 AM Bug report #6636 (Rejected): Latest gdal update leads to crash with mrsid-layer
After updating/installing 1.8 though osgeo4w-setup.exe advanced install, full package, projects with at least a mrsid... Bernd Vogelgesang

2012-11-05

03:56 PM Feature request #6632 (Closed): Implement QgsPostgresProvider::addFeatures for TopoGeometry layers
editing is implemented, but we also want to add new items. Sandro Santilli
03:55 PM Feature request #6631 (Closed): Implement QgsPostgresProvider::deleteFeatures for TopoGeometry la...
And we want to do something special for TopoGometry layers: delete the relation rows Sandro Santilli
03:54 PM Bug report #6630 (Closed): Implement QgsPostgresProvider::addFeatures
We want to be able to add TopoGeometry objects into a topological layer. Sandro Santilli
02:20 PM Feature request #3402: Feature count when using classifed symbology
Total feature count is now appended to layer name in the same manner as to classes.
Work done by Faunalia for Agenc...
Radim Blazek
02:20 PM Feature request #3402: Feature count when using classifed symbology
Total feature count is now appended to layer name in the same manner as to classes.
Work done by Faunalia for Agenc...
Radim Blazek
02:20 PM Feature request #3402: Feature count when using classifed symbology
Total feature count is now appended to layer name in the same manner as to classes.
Work done by Faunalia for Agenc...
Radim Blazek
02:18 PM Feature request #3402 (Closed): Feature count when using classifed symbology
Fixed in changeset commit:"5de2feef7d4df677dca56825bc2bb2dade4c83c7". Radim Blazek
01:24 PM Feature request #6629 (Open): Processing: Add option to Show only active layers in layer dialogs
It is very annoying and error prone to search through the ever growing list of layers when working in processing stag... Bernd Vogelgesang
10:17 AM Bug report #6628 (Closed): plugin manager checkboxes don't render properly
The plugin manager checkboxes don't render properly - the right border of the checkboxes is invisible.
This happens...
Etienne Tourigny
08:17 AM Feature request #6626 (Closed): merge and publishing
Is it possible to add this possibilitie : for Qgis it could be interresting to have mail merged word documents with Q... Romain Govaere
08:11 AM Bug report #6625 (Closed): Classes in Natural Braeks (Jenks) Symbology
Symbology of a vector layer (shapefile in the test case)--> Graduated Renderer --> Natural Breaks (Jenks) mode.
It se...
Diego Mo
04:45 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
aperi2007 - wrote:
> The main method we use to create a derivative dataset
> is to copy a geometry from a base datas...
Radim Blazek
04:41 AM Bug report #6569: Print crash
Francesco Barsotti wrote:
> I tried without Qgis Master but with the new symbology and it works.
> I didn't try with...
Jürgen Fischer
04:29 AM Bug report #6569 (Closed): Print crash
Francesco Barsotti wrote:
> I tried without Qgis Master but with the new symbology and it works.
> I didn't try with...
Giovanni Manghi
04:29 AM Bug report #6569 (Closed): Print crash
Francesco Barsotti wrote:
> I tried without Qgis Master but with the new symbology and it works.
> I didn't try with...
Giovanni Manghi
01:08 AM Bug report #6569: Print crash
I tried without Qgis Master but with the new symbology and it works.
I didn't try with qgis master because I actuall...
Francesco Barsotti
03:46 AM Bug report #6624 (Closed): Zonal statistics returns wrong values
The attached raster has:
STATISTICS_MAXIMUM=82.267440795898
STATISTICS_MEAN=8.4222511972116
STATISTICS_MINIMUM=0
STA...
Paolo Cavallini
03:43 AM Bug report #6623: Sorting of columns wrong
Ouch, in this case it may be the plugin Zonal statistics that is wrong, as the base raster from which these fields we... Paolo Cavallini
03:37 AM Bug report #6623 (Rejected): Sorting of columns wrong
Looks fine here:
0 < 4086.0474023819 < 2.0225321751152e+23
0 < 38.5476170036028 < 4.43537757700702e+23
Did you stret...
Jürgen Fischer
03:37 AM Bug report #6623 (Rejected): Sorting of columns wrong
Looks fine here:
0 < 4086.0474023819 < 2.0225321751152e+23
0 < 38.5476170036028 < 4.43537757700702e+23
Did you stret...
Jürgen Fischer
03:16 AM Bug report #6623 (Rejected): Sorting of columns wrong
Sorting the columns of attached file by clicking on the column heading results in a wrong order (seems ordered litera... Paolo Cavallini
02:46 AM Bug report #6620 (Closed): ERROR: column reference "ctid" is ambiguous
Fixed by commit:83f2b2db42871a63ae622aa6bbff71cf58e2ce5d Sandro Santilli
02:46 AM Bug report #6620 (Closed): ERROR: column reference "ctid" is ambiguous
Fixed by commit:83f2b2db42871a63ae622aa6bbff71cf58e2ce5d Sandro Santilli
02:46 AM Bug report #6620 (Closed): ERROR: column reference "ctid" is ambiguous
Fixed by commit:83f2b2db42871a63ae622aa6bbff71cf58e2ce5d Sandro Santilli
02:45 AM Bug report #6621 (Closed): TopoGeometry editing broken when using CTID as primary key
Fixed in changeset commit:"8c391922a62d9b87d88eb0652498c6fa48e365a1". Sandro Santilli
01:33 AM Bug report #6621 (Closed): TopoGeometry editing broken when using CTID as primary key
The latest TopoGeometry editing code, in the part where the _id_ of the newly created TopoGeometry is updated, fails ... Sandro Santilli
02:34 AM Feature request #6614: Add support for "unknown" units
I just wanted to add this message I saw flying by at qgis startup:
Debug: src/core/qgsmaprenderer.cpp: 216: (adjustE...
Sandro Santilli
02:00 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Hi Filipe,
Exactly, and in addition, following Alexander's indication, I did the tests with the option "Ignore shape...
Pedro Venâncio

2012-11-04

12:58 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Pedro, to make sure I understand correctly (and to make sure others do to):
You made a table in which you record yo...
Filipe Dias
09:09 AM Bug report #6299 (Reopened): Sextante output do not have the same Encoding as the inputs
Hi,
I'm reopening this ticket because I think that there is even a problem.
I leave here [1] a table with the behav...
Pedro Venâncio
12:11 AM Bug report #6620 (Closed): ERROR: column reference "ctid" is ambiguous
On TopoGeometry column editing:... Sandro Santilli
10:18 AM Bug report #3164 (Resolved): Gibberish in output tab of GRASS tools
Thanks Minoru Akagi for the patch!
Please test it and reopen if necessary.
Giuseppe Sucameli
10:18 AM Bug report #3164 (Resolved): Gibberish in output tab of GRASS tools
Thanks Minoru Akagi for the patch!
Please test it and reopen if necessary.
Giuseppe Sucameli
10:18 AM Bug report #3164 (Resolved): Gibberish in output tab of GRASS tools
Thanks Minoru Akagi for the patch!
Please test it and reopen if necessary.
Giuseppe Sucameli
10:05 AM Bug report #3164 (Closed): Gibberish in output tab of GRASS tools
Fixed in changeset commit:"c53c85813f4723b75d4e9326d2565fb51eaa8355". Giuseppe Sucameli
10:15 AM Bug report #4547: Garbled Japanese characters in GRASS plugin
Thanks Minoru Akagi!
I hope we haven't broken other languages :)
Now that the change is in master, please could othe...
Giuseppe Sucameli
10:05 AM Bug report #4547 (Closed): Garbled Japanese characters in GRASS plugin
Fixed in changeset commit:"c53c85813f4723b75d4e9326d2565fb51eaa8355". Giuseppe Sucameli
07:28 AM Bug report #6615: Add PostGIS Layers hangs in certain cases before its done determining geometry ...
Aren Cambre wrote:
> Sorry, yes, on 1.8.0 release. Have not tried master.
ok. Please give it a try and report back. ...
Giovanni Manghi
06:58 AM Bug report #6615: Add PostGIS Layers hangs in certain cases before its done determining geometry ...
Sorry, yes, on 1.8.0 release. Have not tried master. Aren Cambre
01:46 AM Bug report #6615 (Feedback): Add PostGIS Layers hangs in certain cases before its done determinin...
On QGIS 1.8? Have you tested master? Thanks Giovanni Manghi
01:45 AM Bug report #6618: GRASS raster resolution not taken into account
Confirmed on Ubuntu. Cannot check on Windows/osgeo4w as the GRASS plugin is lost due to a GRASS update.
Isn't this a...
Giovanni Manghi

2012-11-03

11:32 PM Bug report #6618 (Closed): GRASS raster resolution not taken into account
Changing raster resolution for GRASS from the popup (GRASS region settings) does not seem to have any effect. Unclear... Paolo Cavallini
11:03 PM Bug report #6616: Preview in expression builder not always showing
Not sure the best way to handle this yet. Nathan Woodrow
10:54 PM Bug report #6616 (Open): Preview in expression builder not always showing
The preview in the field calculator expression builder is often missing. This happens because the expression text is ... Paolo Cavallini
08:52 PM Bug report #4547: Garbled Japanese characters in GRASS plugin
Giuseppe Sucameli wrote:
> Since I cannot test it with Japanese lang, please, could you try the branch "grass_jp_enc"...
Minoru Akagi
06:38 PM Bug report #4547: Garbled Japanese characters in GRASS plugin
Hi Minoru,
the patch looks good to me.
I'm adding a check so if we are not able to get the encoding from the XML de...
Giuseppe Sucameli
05:17 PM Bug report #6615 (Closed): Add PostGIS Layers hangs in certain cases before its done determining ...
If I open *Add PostGIS Layers*, select a PostGIS connection, and hit *Connect*, the *Add PostGIS Layers* dialog appea... Aren Cambre
01:51 PM Bug report #6610 (Closed): Field topocol ignored, because of unsupported type c
Fixed in changeset commit:"35646bbc1890b79b5a937ac9aeb730583f17a27e". Jürgen Fischer
12:47 PM Bug report #5848 (Feedback): Different icons for QGIS and QGIS Browser
Hi Alexander,
Here is a version I made for when we created an alias to the embedded browser within the main QGIS.app...
Larry Shaffer
12:47 PM Bug report #5848 (Feedback): Different icons for QGIS and QGIS Browser
Hi Alexander,
Here is a version I made for when we created an alias to the embedded browser within the main QGIS.app...
Larry Shaffer
12:35 PM Bug report #5848: Different icons for QGIS and QGIS Browser
Here is sample icon for QGIS Browser. Alexander Bruy
12:32 PM Feature request #6559 (Closed): The Icons for the QGIS Browser & Application need to be different.
Duplictes #5848 Alexander Bruy
12:32 PM Feature request #6559 (Closed): The Icons for the QGIS Browser & Application need to be different.
Duplictes #5848 Alexander Bruy
08:10 AM Feature request #6575: Print the contents of identify windows
Hi,
this is another sample of kind of GFI response.
http://web.regione.toscana.it/wmsraster/com.rt.wms.RTmap/wms?map...
aperi2007 -
08:01 AM Feature request #6575: Print the contents of identify windows
>Could you provide two specific WMS urls that would be used for acceptance testing that demonstrate the kinds of GFI ... aperi2007 -
07:26 AM Feature request #6575: Print the contents of identify windows
Funding offered http://lists.osgeo.org/pipermail/qgis-developer/2012-November/023003.html Jürgen Fischer
07:22 AM Feature request #6575: Print the contents of identify windows
the possibility to print html responses is implemented in commit:ab2442bbef. QWebView now has a context menu that al... Jürgen Fischer
06:39 AM Feature request #6575: Print the contents of identify windows
Hi
Could you provide two specific WMS urls that would be used for acceptance testing that demonstrate the kinds of G...
Tim Sutton
05:07 AM Feature request #6614 (Open): Add support for "unknown" units
It often happens that qgis doesn't know what the units of the input data are.
In those cases qgis currently makes a g...
Sandro Santilli

2012-11-02

10:52 PM Feature request #6598: Singleband pseudocolor classification
Alternatively, would it be simpler to modify the "Singleband gray" Render type to support a full set of color gradien... David Shean
03:04 PM Bug report #6613 (Closed): Allow system-wide Qextserialport
The attached patch modifies the buildsystem to either use the bundled Qexterserialport or a system-wide library.
A f...
Volker Fröhlich
03:01 PM Feature request #1483: Possibility to copy and paste a layer
Implemented in commit:c11df1aa79 as 'Duplicate layer(s)' action. Does not include the copy/paste feature, or drag/dro... Larry Shaffer
03:01 PM Feature request #1483: Possibility to copy and paste a layer
Implemented in commit:c11df1aa79 as 'Duplicate layer(s)' action. Does not include the copy/paste feature, or drag/dro... Larry Shaffer
01:33 PM Bug report #6610: Field topocol ignored, because of unsupported type c
Can you cast it to text ? At least for TopoGeometry it would be perfect Sandro Santilli
01:23 PM Bug report #6610: Field topocol ignored, because of unsupported type c
Sandro Santilli wrote:
> Sounds like a missing check for query execution error, in qgspostgresprovider.cpp:1020
how ...
Jürgen Fischer
01:21 PM Bug report #6610: Field topocol ignored, because of unsupported type c
Sounds like a missing check for query execution error, in qgspostgresprovider.cpp:1020 Sandro Santilli
01:05 PM Bug report #6610 (Closed): Field topocol ignored, because of unsupported type c
topocol is a column of the "TopoGeometry" which contains all nulls.
Note that another "TopoGeometry" field in the _sa...
Sandro Santilli
01:26 PM Bug report #6611 (Closed): converting OSM file to shp losses data in the procees
I have a OSM file for Romania, created using osmconvert from pbf.
and i load the osm data into Qgis using Openstreet...
baditaflorin -
01:25 PM Bug report #6585: <img> does not work in html map tips?
Nathan Woodrow wrote:
> Can you post the html you have used?
like
<h1>[% "entidade" %]</h1>
<p>[% "area_ha" %]</p>
...
Giovanni Manghi
12:51 PM Bug report #4469 (Closed): Postgis connection lost forever on backend restart.
I tried 1.8.0 and it works fine. Also master works fine.
Sandro Santilli
12:51 PM Bug report #4469 (Closed): Postgis connection lost forever on backend restart.
I tried 1.8.0 and it works fine. Also master works fine.
Sandro Santilli
12:46 PM Bug report #6599 (Closed): Tables in current_schema() gets loaded with no schema info in the URI
I'll close this, as I know I'm not going to add a test for this anyway... Sandro Santilli
12:46 PM Bug report #6599 (Closed): Tables in current_schema() gets loaded with no schema info in the URI
I'll close this, as I know I'm not going to add a test for this anyway... Sandro Santilli
12:46 PM Bug report #6569: Print crash
Francesco Barsotti wrote:
> The file is more than 5MB so I send you a link to the sample data. The link is operating ...
Giovanni Manghi
07:12 AM Bug report #6569: Print crash
The file is more than 5MB so I send you a link to the sample data. The link is operating one week.
thanks
https://ww...
Francesco Barsotti
06:44 AM Bug report #6569: Print crash
Francesco Barsotti wrote:
> Here is the sample!
the .shp file is missing
Giovanni Manghi
06:23 AM Bug report #6569: Print crash
Here is the sample! Francesco Barsotti
06:23 AM Bug report #6569: Print crash
Here is the sample! Francesco Barsotti
06:23 AM Bug report #6569: Print crash
Here is the sample! Francesco Barsotti
06:23 AM Bug report #6569: Print crash
Here is the sample! Francesco Barsotti
06:23 AM Bug report #6569: Print crash
Here is the sample! Francesco Barsotti
11:12 AM Bug report #4091: Create layer from delimited text (csv) does not work properly for quoted strings
I have an update for the delimiter plugin which fixes the newline and comma issues, but it also requires an update to... Chris Crook
10:22 AM Bug report #6609 (Closed): WFS client does not store Username and Password
Tested on both qgis 1.8 and master and Windows and Linux.
The WFS client does not store the username and password wh...
Giovanni Manghi
10:15 AM Feature request #5899: Duplicate layer
Alexander Bruy wrote:
> Implemented in commit:c11df1aa79
great addition Alexander! Thanks!
Giovanni Manghi
10:12 AM Feature request #5899 (Closed): Duplicate layer
Implemented in commit:c11df1aa79 Alexander Bruy
10:12 AM Feature request #5899 (Closed): Duplicate layer
Implemented in commit:c11df1aa79 Alexander Bruy
10:08 AM Feature request #4527: Datatype column in the postgresql source select dialog
Found: just committed by jef, with a shy commit message :)
for the record, it is commit:62ebf889740f3b89b99136f047ca6...
Sandro Santilli
10:01 AM Feature request #4527 (Closed): Datatype column in the postgresql source select dialog
I don't know since when but as of current master I do see the information in a column called "Geometry Type".
Haven't...
Sandro Santilli
10:01 AM Feature request #4527 (Closed): Datatype column in the postgresql source select dialog
I don't know since when but as of current master I do see the information in a column called "Geometry Type".
Haven't...
Sandro Santilli
10:01 AM Feature request #4527 (Closed): Datatype column in the postgresql source select dialog
I don't know since when but as of current master I do see the information in a column called "Geometry Type".
Haven't...
Sandro Santilli
10:01 AM Feature request #4527 (Closed): Datatype column in the postgresql source select dialog
I don't know since when but as of current master I do see the information in a column called "Geometry Type".
Haven't...
Sandro Santilli
09:57 AM Bug report #6608: QGIS crashes when used as WFS client together with QGIS server
error message in linux terminal is:
vania@nivalis:~$ qgis
Warning: loading of qgis translation failed [/usr/share/q...
Giovanni Manghi
09:56 AM Bug report #6608 (Closed): QGIS crashes when used as WFS client together with QGIS server
The latest versions of QGIS WFS Server master are making QGIS desktop crash when adding a WFS layer. Tested on both q... Giovanni Manghi
04:54 AM Bug report #6607 (Closed): QGIS Crashes on exit
Both 1.8.0 version and development version 42104d7 produce an error on quitting.
On exit, (how is not important) the ...
Alessandro Ciali
02:22 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
Ok, perhaps I understand the misunderstanding.
Usually who work on a GIS world, don't need only see the data on a ma...
aperi2007 -
01:49 AM Feature request #6605 (Closed): Image not exported to PDF
I loaded a logo as a picture in a layout. The logo can be seen in the print composer, can be plotted, but isn't there... Michael Rembe
01:23 AM Bug report #6604 (Closed): scale dependent visibility not included in style
When I set a scale dependent visibility for a layer (vector or raster) and I save the style this properties is not in... leolami -

2012-11-01

06:42 PM Bug report #4547: Garbled Japanese characters in GRASS plugin
Okay, I attach a patch including patch for #3164 anew. Minoru Akagi
05:55 PM Bug report #4547: Garbled Japanese characters in GRASS plugin
May be a duplicate of #3164. Please close it if this is the case. Paolo Cavallini
05:55 PM Bug report #3164: Gibberish in output tab of GRASS tools
May be duplicated in #4547. Please note: patch attached to #4547 Paolo Cavallini
04:11 PM Bug report #3164: Gibberish in output tab of GRASS tools
It's good to handle output text encoding of GRASS modules as "System" encoding, I suppose. Minoru Akagi
03:09 PM Feature request #6603 (Closed): Concave hulls function
A request on the mailing list concerning a problem, the solution for would be a a concave hull function leads, to thi... Bernd Vogelgesang
02:58 PM Bug report #6602 (Closed): Python bindings: projectRead() not thrown on Windows
I'm connecting the projectRead() signal:... Rafael Varela
12:02 PM Bug report #6299 (Closed): Sextante output do not have the same Encoding as the inputs
Yes that was it.
I tried with today's QGIS Master and this no longer happened. It wasn't even necessary to check "ig...
Filipe Dias
09:57 AM Bug report #843 (Feedback): Import PostGIS data into GRASS via QGIS toolbox
Giovanni Manghi
09:54 AM Bug report #843: Import PostGIS data into GRASS via QGIS toolbox
So commit:0dc01f5 removes the workaround.
Otto, Horst, could you try to do the exports today, of both tables in curre...
Sandro Santilli
09:50 AM Bug report #843 (Reopened): Import PostGIS data into GRASS via QGIS toolbox
Also, I didn't find any conditional in the code dropping the schema qualification Sandro Santilli
09:50 AM Bug report #843 (Reopened): Import PostGIS data into GRASS via QGIS toolbox
Also, I didn't find any conditional in the code dropping the schema qualification Sandro Santilli
09:47 AM Bug report #843: Import PostGIS data into GRASS via QGIS toolbox
I would like to drop this schema omission workaround for a bug which is in the v.in.ogr user for reasons described in... Sandro Santilli
09:47 AM Bug report #843: Import PostGIS data into GRASS via QGIS toolbox
I would like to drop this schema omission workaround for a bug which is in the v.in.ogr user for reasons described in... Sandro Santilli
09:47 AM Bug report #843: Import PostGIS data into GRASS via QGIS toolbox
I would like to drop this schema omission workaround for a bug which is in the v.in.ogr user for reasons described in... Sandro Santilli
09:55 AM Bug report #6599: Tables in current_schema() gets loaded with no schema info in the URI
This one is fixed by commit:0dc01f5
Lacks a testcase (the other 50% of it)
Sandro Santilli
09:44 AM Bug report #6599: Tables in current_schema() gets loaded with no schema info in the URI
I've been told the ticket is also here, with same number #843
I haven't understood the steps to take to reproduce th...
Sandro Santilli
09:40 AM Bug report #6599: Tables in current_schema() gets loaded with no schema info in the URI
So it looks like the origin of the _drop_ of schema info when == current schema is here: #843
which can be seen in gi...
Sandro Santilli
08:09 AM Bug report #6599 (Closed): Tables in current_schema() gets loaded with no schema info in the URI
So you can't, from a plugin for example, get to the schema containing the table in an easy way, despite the fact that... Sandro Santilli
09:24 AM Bug report #6569 (Feedback): Print crash
please attach sample data Giovanni Manghi
09:24 AM Bug report #6569 (Feedback): Print crash
please attach sample data Giovanni Manghi
09:24 AM Bug report #6569 (Feedback): Print crash
please attach sample data Giovanni Manghi
09:16 AM Bug report #6600 (Closed): GRASS plugin lost on both qgis/qgis master in osgeo4w
probably due to a GRASS update Giovanni Manghi
08:06 AM Bug report #6591: topoviewer: layers are not under their group anymore
I've found that sometimes they are and sometimes they are not.
I think it depends on the presence of another layer wh...
Sandro Santilli
05:39 AM Feature request #3631: Delimited Text Enhancement
oops, seems I can't reopen it. Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
05:36 AM Feature request #3631: Delimited Text Enhancement
Ok, I'm reopening it, as the problem is valid still. I'm leaving it in plugins, maybe another ticket for "Add attribu... Borys Jurgiel
04:53 AM Bug report #6597 (Closed): Entry for Serbian translation duplicated
Serbian translation is provided in latin and cyrillic letters as both are official used in serbia
setting this to inv...
Werner Macho
04:53 AM Bug report #6597 (Closed): Entry for Serbian translation duplicated
Serbian translation is provided in latin and cyrillic letters as both are official used in serbia
setting this to inv...
Werner Macho
04:53 AM Bug report #6597 (Closed): Entry for Serbian translation duplicated
Serbian translation is provided in latin and cyrillic letters as both are official used in serbia
setting this to inv...
Werner Macho
04:53 AM Bug report #6597 (Closed): Entry for Serbian translation duplicated
Serbian translation is provided in latin and cyrillic letters as both are official used in serbia
setting this to inv...
Werner Macho
03:57 AM Bug report #6597 (Closed): Entry for Serbian translation duplicated
The entry for Serbian translation in the about menu is duplicated. Paolo Cavallini
04:47 AM Feature request #6598 (Closed): Singleband pseudocolor classification
The new support for singleband pseudocolor (see "#6443":#6443) is great.
However, a few small changes would improve ...
David Shean
02:16 AM Bug report #6595 (Closed): curved labels gone missing when project's CRS is WGS84 but shows up fi...
Steps to reproduce issue:
1. load roads shapefile attached to issue 6594
2. Enable labelling with this conditional qu...
Mathieu Pellerin - nIRV
01:41 AM Bug report #6594 (Closed): curved placement label not fulling circular line
I just noticed the labelling engine is misplacing a label (i.e. not following line) when using the curved placement a... Mathieu Pellerin - nIRV
01:17 AM Bug report #6593: newly added "letter spacing" and "word spacing" label values ignored when sett...
Ok. I'll look at doing that ASAP. Larry Shaffer
01:13 AM Bug report #6593: newly added "letter spacing" and "word spacing" label values ignored when sett...
Larry, depending on how hard / long it'd take to implement any of the above listed options, maybe it'd be good to at ... Mathieu Pellerin - nIRV

2012-10-31

12:39 AM Bug report #6593 (Feedback): newly added "letter spacing" and "word spacing" label values ignore...
Hi,
They aren't ignored, they're just not implemented yet. :^) Currently, multi-line labels and direction symbol are...
Larry Shaffer
12:39 AM Bug report #6593 (Feedback): newly added "letter spacing" and "word spacing" label values ignore...
Hi,
They aren't ignored, they're just not implemented yet. :^) Currently, multi-line labels and direction symbol are...
Larry Shaffer
09:48 PM Bug report #6593 (Closed): newly added "letter spacing" and "word spacing" label values ignored ...
Subject says it all. The letter spacing and word spacing values are ignored when the placement is set to curved on l... Mathieu Pellerin - nIRV
06:29 PM Bug report #6592 (Closed): SQL where clause widget does not use plain text
The "SQL where clause" text widget in the search query builder (advanced search in the attribute table) accepts somet... Alister Hood
03:45 PM Bug report #6591 (Closed): topoviewer: layers are not under their group anymore
I clearly remember having added a layer group to put all layers into, but as of commit:bbecffdb659ce3b5d33d11fa93290f... Sandro Santilli
02:53 PM Feature request #4527: Datatype column in the postgresql source select dialog
NOTE: as of commit:b47b43997e71f0f042d89df898371512fe259512 the data type information is available as part of QgsPost... Sandro Santilli
02:52 PM Bug report #4793 (Closed): Geography columns not seen with "only look in geometry_columns" off
I can't reproduce anymore with 1.8.0, assuming fixed Sandro Santilli
02:06 PM Feature request #3631: Delimited Text Enhancement
> I see two big advantages.
> 1- "Add delimited text" plugin lets you choose delimiters and check everything goes we...
Alister Hood
10:24 AM Bug report #3737: incorrect feature count with rule based renderer
Work done by Faunalia for Agence de l'eau Adour Garonne. Radim Blazek
10:23 AM Feature request #5960 (Closed): Add warning rule based style if feature count counts duplicate fe...
Radim Blazek
10:21 AM Feature request #5960: Add warning rule based style if feature count counts duplicate features
Fixed in commit:c4014cfab.
Because it would be problematic to show the information about duplicate feature counts in...
Radim Blazek
09:17 AM Bug report #6449: Big polygon in shapefile not shown in 1.8.0
Definitely a BLOCKER - confirmed on windows and debian
QGIS 1.8 and master commit:d7a7a46
I don't think it's a proje...
Werner Macho
08:41 AM Bug report #6590 (Closed): QGIS crashes when opening project where CSV-datatable moved
already fixed in master. Giovanni Manghi
08:41 AM Bug report #6590 (Closed): QGIS crashes when opening project where CSV-datatable moved
already fixed in master. Giovanni Manghi
07:38 AM Bug report #6590 (Closed): QGIS crashes when opening project where CSV-datatable moved
Steps to reproduce:
1. Create project
2. Add CSV-Datatable as a layer
3. Save project, close
4. Move CSV-Datatable to...
paull -
08:20 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
aperi2007 - wrote:
> What do you think when speak of an hack for temporary layer ?
Still I don't know what do you me...
Radim Blazek
07:53 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
>I think that raster layer API has to be extended to support vector features like current select, getNextFeature etc.... aperi2007 -
07:43 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
aperi2007 - wrote:
> I guess the first immediate use is show the alphanumeric values in a windows and use the geometr...
Radim Blazek
02:58 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
>What do you mean exactly by "Give to the user the capability to add all of it (geometries + attributes for each reco... aperi2007 -
02:05 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
Copy/paste for vectors is currently using selected features, not a result of identify. Too keep it consistent, the sa... Radim Blazek
06:02 AM Bug report #5345: Problems with PATH-Variables in msys.bat and OSGeo4W
I have independently applied the same corrections to osgeo4w.bat and o-help.bat proposed by Andre Joost and can confi... Andy Harfoot
05:17 AM Bug report #6589 (Closed): spatial join plugin ftools gives wrong results
when joining two polygone shape files through "spatial join" (ftools) the resulting atrribute table of the new shape... johan sanders
03:26 AM Feature request #6588 (Open): Raster Calculator - Columns and Rows
Using Raster Calculator, I changed the bounding box coordinates so that it would only do a small subset of the data. ... Jonathan Moules
03:15 AM Feature request #6587 (Open): "Current Visible Extent" for Raster calculator
The Raster Calculator has a "current layer extent" button to allow easy creation of correctly sized rasters.
My su...
Jonathan Moules
02:57 AM Bug report #3446 (Closed): "Layers" panel issue
closing s fixed, reopen if necessry Giovanni Manghi
02:57 AM Bug report #3446 (Closed): "Layers" panel issue
closing s fixed, reopen if necessry Giovanni Manghi
02:56 AM Bug report #3455 (Closed): OTF or save as in another projection not work no more
Giovanni Manghi

2012-10-30

01:41 PM Bug report #3446: "Layers" panel issue
Can't replicate the linux issue using latest master build for ubuntu 12.10. Goyo D
01:41 PM Bug report #3446: "Layers" panel issue
Can't replicate the linux issue using latest master build for ubuntu 12.10. Goyo D
01:30 PM Bug report #3455: OTF or save as in another projection not work no more
Can't replicate using the latest master build for ubuntu 12.10. Goyo D
01:30 PM Bug report #3455: OTF or save as in another projection not work no more
Can't replicate using the latest master build for ubuntu 12.10. Goyo D
06:19 AM Feature request #6586: Allow qgis to understand and use a GML response from A GetFeatureInfo text...
An example of a response GML from a Mapserver is this:
http://web.regione.toscana.it/wmsraster/com.rt.wms.RTmap/wms?...
aperi2007 -
06:18 AM Feature request #6586 (Open): Allow qgis to understand and use a GML response from A GetFeatureIn...
QGIS desktop actually when do an Identify on a WMS LAyer will do a requets GetFeatureInfo of text/html type.
But eve...
aperi2007 -
06:03 AM Feature request #5887 (Closed): qgis on a GetFeatureInfo use always text/plain
I close this ticket to open a new ticket with better description of what need.
aperi2007 -
06:03 AM Feature request #5887 (Closed): qgis on a GetFeatureInfo use always text/plain
I close this ticket to open a new ticket with better description of what need.
aperi2007 -
06:02 AM Feature request #5892 (Closed): Enhance the identify on WMS using GetFeatureInfo
I close this ticket to open a new ticket with better explanation of what need.
aperi2007 -
06:02 AM Feature request #5892 (Closed): Enhance the identify on WMS using GetFeatureInfo
I close this ticket to open a new ticket with better explanation of what need.
aperi2007 -
05:26 AM Bug report #6299 (Feedback): Sextante output do not have the same Encoding as the inputs
Not sure if I understand problem correctly. Your input file has some non-ASCII characters in attributes and in output... Alexander Bruy
01:19 AM Bug report #6585: <img> does not work in html map tips?
Can you post the html you have used? Nathan Woodrow
01:18 AM Bug report #6585 (Closed): <img> does not work in html map tips?
Just tested the tag IMG in html map tips, both using an hardcoded url or an attribute, but the image does not show. T... Giovanni Manghi

2012-10-29

08:56 PM Bug report #6412: gdalbuildvrt doesn't recognize chinese directory path
I tested using QGIS 1.8 in MacOSX and it I get the same result as yours. The person who encountered this problem was... maning sambale
06:54 PM Bug report #6561: 'cubic' resambling for "zoomed in" (scale > 100%) rasters creates undesired vis...
Marco, I understand the characteristic cubic interpolation, and I believe what is being raised here doesn't fall with... Mathieu Pellerin - nIRV
01:31 PM Bug report #6582 (Closed): QGIS server displayes text layers only with absolute pathes
Currently, the conversion from relative pathes to absolute pathes does not work for delimited text files. Marco Hugentobler
10:18 AM Feature request #6535: Support WFS Post GetFeature Request in QGIS-Server
Add mapserver qgsspatialfilter "4c271f2c81b1f3596c4fde465f934054afa05490":commit:4c271f2c81b1f3596c4fde465f934054afa... René-Luc ReLuc
08:33 AM Bug report #4091 (Reopened): Create layer from delimited text (csv) does not work properly for qu...
Whether you choose only one delimiter from the "selected delimiter" list it is internally converted to "plain delimit... Giuseppe Sucameli
08:33 AM Bug report #4091 (Reopened): Create layer from delimited text (csv) does not work properly for qu...
Whether you choose only one delimiter from the "selected delimiter" list it is internally converted to "plain delimit... Giuseppe Sucameli
08:33 AM Bug report #4091 (Reopened): Create layer from delimited text (csv) does not work properly for qu...
Whether you choose only one delimiter from the "selected delimiter" list it is internally converted to "plain delimit... Giuseppe Sucameli
08:33 AM Bug report #4091 (Reopened): Create layer from delimited text (csv) does not work properly for qu...
Whether you choose only one delimiter from the "selected delimiter" list it is internally converted to "plain delimit... Giuseppe Sucameli
08:22 AM Bug report #4091 (Closed): Create layer from delimited text (csv) does not work properly for quot...
Fixed in changeset commit:"230bbfb459f807a645fa3edbbc44b1012177bdfb". Giuseppe Sucameli
04:04 AM Bug report #4953 (Closed): Transparency band not persisted in QgsProject
Giovanni Manghi
03:58 AM Bug report #4953: Transparency band not persisted in QgsProject
Giovanni Manghi wrote:
> have you tested qgis master? many things changed in rasters in qgis master... please try and...
Homme Zwaagstra
03:36 AM Bug report #6567: QGIS Lisboa crashes when selecting a raster and clicking on it while editing a ...
I tested on Linux Ubuntu 12.04 with QGIS running from the terminal and also got a crash. This is the message that sho... Filipe Dias

2012-10-28

12:40 AM Bug report #6581 (Closed): Transformation
Giovanni Manghi
12:27 AM Bug report #6581: Transformation
Yes, you are right - its a problem of ogr! I checked it with ogr2ogr and there is the same problem. Anna Hock
 

Also available in: Atom