Activity

From 2011-09-30 to 2011-10-29

2011-10-29

06:49 PM Feature request #4464: Selection colour could be above polygon points: IMO making the polygon edit points below the selection is impractical as it would make editing hard.
This is simply ... Nathan Woodrow
03:34 PM Feature request #4464 (Closed): Selection colour could be above polygon points: When using the "Select Single Feature" button on a map that is zoomed out it is almost impossible in some case to see... Gerhardus Geldenhuis
06:15 PM Bug report #4454: multiline labels overlap in the labeling-ng engine: Agreed. Now part of pull request. Nathan Woodrow
07:27 AM Bug report #4454: multiline labels overlap in the labeling-ng engine: Hey Nathan, thanks, that was quick :)
It might be good to add this patch to your enable multiline per default pull r... Mathieu Pellerin - nIRV
06:07 PM Feature request #4457: Editable "Identify Results< window when Editing: I think we should reopen this as I think this would be a good feature for QGIS. The current attribute edit behavior ... Nathan Woodrow
11:53 AM Feature request #4457: Editable "Identify Results< window when Editing: Yah, sorry.
I should have been much much more specific.
To be able to EDIT the attribute values WITHIN the "Identif... Mars Sjoden
11:40 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing: It is already possible. In the identify window click on "actions", then "edit feature form". Giovanni Manghi
11:40 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing: It is already possible. In the identify window click on "actions", then "edit feature form". Giovanni Manghi
10:59 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing: Idea
Allow the attribute values within the >Identify Results< window to be editable WHEN editing selected feature.
... Mars Sjoden
04:58 PM Feature request #4467 (Open): Imported GPS data should be automatically grouped: When I import data from my Garmin GPS I get:
track points
route points
tracks
routes
way points
All of these are sep... Gerhardus Geldenhuis
03:59 PM Bug report #4466 (Closed): Fixes for "v.what.vect" and "v.generalize" modules in the GRASS plugin: In the GUI files of the two cited modules are needed two simple changes.
For v.what.vect the line
<option key="qvec... Giovanni Manghi
03:56 PM Bug report #4465 (Closed): patch to update the GRASS plugin to make it cope correctly with the ne...: In the next GRASS release 6.4.2RC2 it will not be allowed anymore to have commands with incomplete or non-sense param... Giovanni Manghi
03:11 PM Feature request #4463 (Closed): Missing Large Icon in Ubuntu Package: I created a shortcut for QGIS in the top panel but the icons appears very pixelated. I suspect it is because there is... Gerhardus Geldenhuis
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...: > When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto... Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...: > When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto... Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...: > When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto... Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...: > When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto... Giovanni Manghi
03:04 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: I am suggesting the following:
When you right click you get a dialog box showing the attributes that you have defined... Gerhardus Geldenhuis
02:58 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: I'm asking because the summary of this ticket need to be changed, seems to me wrong and do not describe well the situ... Giovanni Manghi
02:57 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: Gerhardus Geldenhuis wrote:
> Hi
> Yes, I am aware that the node tool can add new nodes, well I just learned it when... Giovanni Manghi
02:54 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: Hi
Yes, I am aware that the node tool can add new nodes, well I just learned it when first typing this request. Howe... Gerhardus Geldenhuis
02:49 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: Gerhardus Geldenhuis wrote:
> It is possible to edit it with the node tool but painful. Yes I can add new nodes and m... Giovanni Manghi
02:47 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: Gerhardus Geldenhuis wrote:
> It is possible to edit it with the node tool but painful. Yes I can add new nodes and m... Giovanni Manghi
02:43 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...: It is possible to edit it with the node tool but painful. Yes I can add new nodes and manipulate them but I can't get... Gerhardus Geldenhuis
02:34 PM Feature request #4461 (Feedback): Add a button "continue editing" after right clicking the mouse ...: Sorry, one question. After the involuntary right click, which stops editing a geomtery, but not remove it, what is st... Giovanni Manghi
02:18 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...: When you are adding a new polygon and have just painstakingly traced out a new feature and you accidentally right cli... Gerhardus Geldenhuis
02:45 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon: Apologies must have missed off the image. Hope it helps to clarify what I mean. Gerhardus Geldenhuis
02:36 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon: can't see any attached image. It would be useful to understand better what do you mean. Giovanni Manghi
02:21 PM Bug report #4462 (Closed): When drawing a new polygon it inverts existing parts of the polygon: When you draw a new polygon it inverts already drawn parts of the polygon back to the layer underneath. I would have ... Gerhardus Geldenhuis
02:35 PM Bug report #4456 (Feedback): Segfault in Ubuntu 11.10 Oneiric Ocelot: Giovanni Manghi
10:59 AM Revision 7297b23b (qgis): fix windows build: Jürgen Fischer
07:43 AM Bug report #4444: Error when loading Python plugins: Robin Lovelace wrote:
> P.S. I'm running Oneric 64 bit.
There are no problems under Oneiric 64bit (I'm using it too)... Giovanni Manghi
06:23 AM Bug report #4444: Error when loading Python plugins: P.S. I'm running Oneric 64 bit.
Robin Lovelace
06:21 AM Bug report #4444: Error when loading Python plugins: I'm having a similar problem in 1.7.1 (updated just now): when qgis loads I get this complaint:... Robin Lovelace
04:49 AM Revision f5bf2b41 (qgis): Remove debug noise for expression labels: Nathan Woodrow
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...: Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...: Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...: Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi

2011-10-28

03:53 PM Feature request #3212: Add to the action the choice of Python but getting the code from a file: If I understand correctly, I think this can already be done. I use the following action in QGIS 1.7.0 to call a pytho... Cyrus Hiatt
03:16 PM Feature request #3136: Update NZ projections for grid transformation support: BTW: I've looked at this issue before and it does seem like there isn't an easy fix.
As far as I can see the proj4 e... Jeremy Palmer
01:45 PM Feature request #3136: Update NZ projections for grid transformation support: Hi Alister,
I think the best option is to patch NZGD49 based proj.4 and gdal definitions upstream so that the nzgd2k... Jeremy Palmer
02:48 PM Revision 483a8d81 (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Tim Sutton
08:53 AM Revision 05e3258c (qgis): debian packaging update: Jürgen Fischer
08:40 AM Revision 3a403cce (qgis): Added vectorfield widgets: Marco Hugentobler
07:53 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot: you may want to try a Virtual Machine first ;) there are plenty already available made with different Linux distribut... Giovanni Manghi
06:35 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot: It started today, and it doesn't go away. My ubuntu is 11.10 amd64 and I installed qgis both from the ubuntugis ppa (... Matteo Fortini
06:13 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot: I am running QGIS-master on Ubuntu 11.10 (on different machines) and I don't see this problem. Clean install? from th... Giovanni Manghi
06:11 AM Bug report #4456 (Closed): Segfault in Ubuntu 11.10 Oneiric Ocelot: QGis randomly segfaults, for example while switching back to "old symbols" for a layer, or reopening a project.
While... Matteo Fortini
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine: Patch for fix. Nathan Woodrow
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine: Patch for fix. Nathan Woodrow
05:46 AM Bug report #4011: Map canvas flickers when content is dragged: I see it too... but I am almost sure that until a few days ago (qgis master on Ubuntu) it wasn't doing it.
Tim Sutt... Giovanni Manghi
05:42 AM Bug report #4011: Map canvas flickers when content is dragged: I can replicate on ubuntu 11.10 running xfce4
see
http://www.youtube.com/watch?v=w3xO21xXxeI Tim Sutton
05:27 AM Bug report #4439: Crash when changing style in Layer Properties: marsofearth - wrote:
> Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a... Ivan Mincik

2011-10-27

01:06 AM Feature request #3742: Save extent after reprojection: N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:06 AM Feature request #3742: Save extent after reprojection: N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS: Duplicate #3742 Alexander Bruy
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS: Duplicate #3742 Alexander Bruy
11:40 PM Feature request #4455: Feature: update map extent when changing project CRS: Sorry, I'm not sure whether the right category is Gui or Projection Support or what. Alister Hood
11:39 PM Feature request #4455 (Closed): Feature: update map extent when changing project CRS: (I thought there was already a ticket for this, but I can't find it)
Currently, if on-the-fly CRS conversion is enab... Alister Hood
12:19 AM Feature request #3136: Update NZ projections for grid transformation support: Hi Jeremy,
Are you aware that when QGIS is installed now (unless installing from source) the srs.db is automatically ... Alister Hood
12:09 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: If anyone is coming to this cold, some of the history of the syncing can be found at #3645 Alister Hood
10:59 PM Revision 9b2bf0af (qgis): Fix grabbing of first QgsFeature; Cache QgsFeature being used to eval; ...: Nathan Woodrow
09:06 PM Bug report #4454: multiline labels overlap in the labeling-ng engine: The code should be:... Mathieu Pellerin - nIRV
08:52 PM Bug report #4454: multiline labels overlap in the labeling-ng engine: I'm pretty sure I found the problem.
The multiline label's width is determined in the void QgsPalLayerSettings::calc... Mathieu Pellerin - nIRV
08:24 PM Bug report #4454 (Closed): multiline labels overlap in the labeling-ng engine: The recently added expression-based label feature exposed an issue with multiline support in the labeling-ng engine.
... Mathieu Pellerin - nIRV
08:05 PM Bug report #4453 (Closed): Relative symbol angle overridden by layer angle: When I create a symbol with different symbol layers, I can put a relative angle between them (say, two triangles with... Leyan Ouyang
07:59 PM Bug report #4452 (Closed): Encoding issue in Metadata tab: If path to file contains cyrillic symbols then in metadata tab it looks gibberish. dr -
07:45 PM Bug report #4133: Identify results - previous state (location, docked status, size) is not saved: Possibly also related to #4019. Alister Hood
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...: Seems duplicates #206 Alexander Bruy
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...: Seems duplicates #206 Alexander Bruy
04:38 PM Bug report #4439: Crash when changing style in Layer Properties: Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a selected shapefile, do... Mars Sjoden
04:18 PM Bug report #4451 (Closed): (regression) Inconsistent behavior in the table of attributes after di...: The issue is rather easy to replicate but I can't find the proper words to describe it briefly, so I'll list instead ... Giovanni Manghi
02:33 PM Revision 306efcb2 (qgis): reduce debugging noise: Jürgen Fischer
02:33 PM Revision 10de06c8 (qgis): For EPSG initialize GDAL CRS from authid instead of proj.4 string: Jürgen Fischer
01:31 PM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.: added debug output
Also finding similar issues on Ubuntu 11.04 with 1.7.1, Fedora 15 with 1.7.1, and OpenSUSE 11. Ra... Mars Sjoden
12:52 PM Bug report #3497: [OsX] Crash when changing font and color in Style manager on OS X: jeronimo diaz wrote:
> Hello ! This is my first time here, I'm not english native speaker but I'm willing to enter t... Mars Sjoden
11:36 AM Bug report #4171 (Closed): outline width of ellipse marker not properly rendered when printing to...: Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore: Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore: Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore: Duplicate #3840 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported: Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported: Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported: Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported: Duplicate #2491 Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel: Applied in commit:b0112f1c42. Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel: Applied in commit:b0112f1c42. Alexander Bruy
11:15 AM Feature request #1609: QGIS4INSPIRE: Seems that we already have several plugins related to metadata: MetaEdit, Metatools and CSWClient Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS: There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS: There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
11:02 AM Revision 7940c395 (qgis): Enable multiline labels by default: Nathan Woodrow
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size: see also #4133 Giovanni Manghi
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size: see also #4133 Giovanni Manghi
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin: Yes, thanks. Paolo Cavallini
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin: Yes, thanks. Paolo Cavallini
09:54 AM Feature request #3382: Include Orfeo Toolbox plugin: Can we close this ticket? Orfeo Toolbox modules now available with as ProcessingFramework module Alexander Bruy
09:08 AM Revision 63949b5c (qgis): Move point displacement renderer from plugin to main application: Marco Hugentobler
06:45 AM Feature request #4450 (Open): Legend symbols (in print composer) are ignoring the "scale size fie...: As result all the symbols do show of the same size. Giovanni Manghi

2011-10-26

08:31 PM Bug report #4011: Map canvas flickers when content is dragged: Just wanted to update this issue as it is still a big problem on Ubuntu. The MapCanvas still flickers constantly as t... sowelu -
05:39 PM Bug report #4449: strange behaviour of piechart function of QGIS: I can confirm. The pink one at the top should have nothing, or at least see though.
!http://i.imgur.com/RymUg.png!
... Nathan Woodrow
08:15 AM Bug report #4449: strange behaviour of piechart function of QGIS: Giovanni Manghi wrote:
> Can you please attach a small sample of your data?
I can give it to you tomorrow morning, b... lokheart _
08:06 AM Bug report #4449: strange behaviour of piechart function of QGIS: Can you please attach a small sample of your data? Giovanni Manghi
08:04 AM Bug report #4449 (Closed): strange behaviour of piechart function of QGIS: I am using QGIS to visual health status of elderly in an elderly home, whether they have medical devices or not is on... lokheart _
05:18 PM Revision dde10dea (qgis): Added vector field symbol layer and widget: Marco Hugentobler
07:47 AM Feature request #3200: Feature cache: Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto... Giovanni Manghi
07:47 AM Feature request #3200: Feature cache: Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto... Giovanni Manghi
07:47 AM Feature request #3200: Feature cache: Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto... Giovanni Manghi
06:36 AM Feature request #3200: Feature cache: I would change the expected version for this patch to 2.0.0, waiting to include it along the multi threaded rendering Giovanni Allegri
07:44 AM Bug report #4433: Edit vertex tool very slow: This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow: This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow: This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
06:46 AM Bug report #4442: Multi line labels render on one line with curved labels: The curved placement is not really meant to draw multiline labels: each character of the text is rotated to have base... Martin Dobias
04:26 AM Feature request #4448 (Open): add resample option/tool to gdal tools: I suggest to add another option to those listed in #2930, to let users create a resampled raster setting the output p... Giovanni Allegri
02:22 AM Bug report #4447 (Closed): basic statistics not available for joined attributes: * Load a vector file.
* Load a dbf with attributes
* Join the dbf to the vector file
* Use Vector->Analysis tools->Ba... mlennert -

2011-10-25

12:56 AM Bug report #1389: The config file (/grass/config/default.qgc) not found: I have recently downloaded qgis from git and compiled and I can confirm this behaviour on my computer too. When I try... Anna Kratochvilova
12:49 AM Bug report #4444 (Closed): Error when loading Python plugins: On QGIS start-up Python error has occurred.
Message from Python error window:... Vaclav Petras
11:57 PM Bug report #4443 (Closed): WMS 1.3.0 axis order: In WMS 1.3.0 the axis order of a lot of SRS has changed.
Several GIS Packages have been modified to correctly implem... Jeff Konnen
07:29 PM Feature request #3200: Feature cache: +1 to this
This patch plus the multi-threaded rendering could add some good speed to QGIS. Nathan Woodrow
04:12 PM Bug report #2352 (Closed): map is drawn twice on toggling a layer's visibility: Giovanni Manghi
04:02 PM Bug report #4442 (Closed): Multi line labels render on one line with curved labels: If you have a multi line label and use curved labeling the label will be rendered on one line ignoring the multi line... Nathan Woodrow
04:00 PM Revision 4fdc8cb4 (qgis): Set prompt as default behaviour for unknown CRS: Marco Hugentobler
03:51 PM Bug report #4393: Rasterlite layers on Windows as 0,0,0: Confirmed with the laster trunk/osgeo4w. Works fine on trunk/Linux (Ubuntu) Giovanni Manghi
10:27 AM Revision fecb0de0 (qgis): Set prompt as default behaviour for unknown CRS: Marco Hugentobler

2011-10-24

01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...: Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...: Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
04:49 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...: http://lists.osgeo.org/pipermail/qgis-user/2011-October/013940.html
7 feedback, all positive, until now. Giovanni Manghi
03:54 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...: The issue has been discussed in the QGIS-USERS mailing list and all the feedback have been in favor of this change. Giovanni Manghi
03:53 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...: My point of view, after giving many training courses, is that the default option should be changed to "prompt for CRS... Giovanni Manghi
12:54 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: Jürgen Fischer wrote:
> Alister Hood wrote:
> > I have spent some more time trying to understand this.
> > For the re... Alister Hood
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't: I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't: I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't: I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:49 PM Bug report #4441 (Closed): Expression parser: some expressions evaluate to NULL when they shouldn't: example 1:
I can create a string attribute field called "test1" and fill it using @$perimeter@
I can then fill it usi... Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator: regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator: regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator: regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator: regexp_replace() was implemented a few months back - see #4099.
Alister Hood
10:59 PM Bug report #4425: Add a capitalize() function to the expression based labeling engine: Martin,
Seems that MS SQL doesn't have a function. You have to define your own :S I suggest we follow postgresql an... Nathan Woodrow
10:58 PM Bug report #4440 (Closed): Old project message references trac, not redmine: When opening a project file from a previous version of QGIS a message is displayed.
As at 1.8.0-116 this still refe... ramon .
10:52 PM Bug report #4426: Add a number_format() function to the QgsExpression: Just changed the header as it's more related to the expression parser itself rather than the labeling per sa Nathan Woodrow
10:41 PM Bug report #4426: Add a number_format() function to the QgsExpression: Also note that there is a "formatted numbers" section in the main labelling dialogue under "label settings", and:
1) ... Alister Hood
10:37 PM Bug report #4426: Add a number_format() function to the QgsExpression: This would be an important feature. In the meantime you might be able to achieve what you need using something like ... Alister Hood
02:32 PM Bug report #4439 (Closed): Crash when changing style in Layer Properties: My QGIS is frequently crashing when changing Styles in Layer Properties.
I see many possibly related issues to this o... Ivan Mincik
12:36 PM Bug report #4409 (Closed): Weird behaviour on Mac OS: Giovanni Manghi
12:31 PM Bug report #4409: Weird behaviour on Mac OS: You are right thanks. It just didn't come to my mind, sorry.
Thanks again Dejan Gambin
08:14 AM Bug report #4409: Weird behaviour on Mac OS: That's full-screen mode. You must have hit apple-F at some point. Apple-F again should return you to windowed mode. William Kyngesburye
07:04 AM Bug report #4409: Weird behaviour on Mac OS: Unfortunatelly I have only one Mac. Maybe I can ask someone to give it a try, but not sure :-( Dejan Gambin
07:01 AM Bug report #4409: Weird behaviour on Mac OS: Dejan Gambin wrote:
> Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
>... Giovanni Manghi
06:53 AM Bug report #4409: Weird behaviour on Mac OS: Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
One possible related t... Dejan Gambin
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS: Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal... Giovanni Manghi
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS: Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal... Giovanni Manghi
12:31 PM Feature request #4365: Add log/ln functions to the field calculator: Nathan's new expression builder (developed for expression-based labeling) should be integrated into field calculator ... Martin Dobias
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator: They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator: They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
11:19 AM Feature request #4438 (Closed): Option to add datasources icons beside layer names in the TOC: QGIS can use a large number of datasources: file based rasters, shapes, spatialite, postgis, postgis rasters, grass, ... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle: There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle: There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle: There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle: There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
10:33 AM Bug report #4437 (Closed): DB-Manager: python error: Hi,
opening the db-manager plugin and try-ing to open a postgis connection,
I see this python error:... aperi2007 -
08:44 AM Feature request #4436 (Closed): snapping when moving: Snapping doesn't work when moving a feature. For example, if I move a feature towards another, it doesn't snapp even ... elcuco -
08:37 AM Feature request #4435 (Closed): extent snapping options: hello!
It would be a great feature if the "Avoid intersection" in the "Snapping Options" could work even between diff... elcuco -
08:23 AM Bug report #4433: Edit vertex tool very slow: Also on Debian, and Windows 7 and Vista, apparently Paolo Cavallini
03:56 AM Bug report #4433 (Closed): Edit vertex tool very slow: Dear developers,
we noticed that the tool for the vertex edit since the version 1.5 is very slow.
When we try to edit... Marica Landini bulma
08:18 AM Bug report #4420 (Closed): Editing label properties makes labels disappear: Paolo Cavallini
06:17 AM Bug report #4420 (Feedback): Editing label properties makes labels disappear: I cannot confirm on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
08:03 AM Bug report #4421: Raster are very slow to load when calculating stats: The raster has a colour table, so stretching does not apply Paolo Cavallini
08:00 AM Bug report #4421: Raster are very slow to load when calculating stats: Maybe this is because in one PC contrast enhancement is set to something different than "No Stretch" (see #3867). Try... Alexander Bruy
07:06 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats: Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats: I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats: I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:59 AM Bug report #4421: Raster are very slow to load when calculating stats: Verified: on one machine it is slow, on another is fast. It might depend on some setting, still to understand which Paolo Cavallini
06:09 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats: Not confirmed here with qgis-trunk on Ubuntu 11.10, the linked sample data is still lightning fast to open. Please le... Giovanni Manghi
07:31 AM Revision 0d79669f (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Tim Sutton
07:07 AM Bug report #4422 (Closed): Tileslider not working: I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:07 AM Bug report #4422 (Closed): Tileslider not working: I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:06 AM Bug report #4422 (Feedback): Tileslider not working: Not confirmed here. It works only if the WMS server is a tiled one, like a tileache one. Try this:
http://tilecache... Giovanni Manghi
06:39 AM Bug report #4415 (Feedback): Centroid in fTools different form centroid fill: The explanation of the different behavior has benn given in the dev mailing list, closing? Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on: Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on: Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on: Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:49 AM Feature request #4430: Zonal statistics: please add more variables: These are the methods available in GRASS for zonal statistics
http://grass.fbk.eu/grass64/manuals/html64_user/r.stat... Giovanni Manghi
04:19 AM Bug report #4434 (Closed): "project properties" and menu icons missing from QGIS when using UNITY...: "project properties" misses from both the "file" and the "settings" menus.
The icons problem surfaced on Ubuntu als... Giovanni Manghi

2011-10-23

10:07 AM Revision 1a1f5ebe (qgis): osgeo4w: build qgis-dev with GRASS 6.4.2RC2: Jürgen Fischer
05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1: That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1: That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:29 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1: It's said about QGIS mapserver that it implements WMS 1.3 as well as 1.1.1 [1]. But the GetCapabilities XML always se... Marco Lechner

2011-10-22

12:56 AM Feature request #4430 (Closed): Zonal statistics: please add more variables: e.g.
MAJORITY
MAXIMUM
MEDIAN
MINIMUM
MINORITY
RANGE
STD
VARIETY
See:
http://resource... Paolo Cavallini
12:52 AM Feature request #4429 (Closed): Zonal statistics: please add checkbox: It would be good to have checkboxes to select only the stats of interest, not being forced to calculate them all Paolo Cavallini
09:14 PM Bug report #4428 (Closed): Diagram overlays not displaying when render caching is on: Diagram layers do not display when "Use render caching where possible to speed up redraws" is checked.
Issue is in bo... Jesse Sheffield
06:54 PM Revision a2a6e786 (qgis): more cosmetics: Jürgen Fischer
06:51 PM Revision d8540c02 (qgis): german translation update: Jürgen Fischer
04:45 PM Revision 59be561a (qgis): fix warnings and more cosmetics: Jürgen Fischer
03:17 PM Revision 697b35a4 (qgis): Label direction symbol shouldn't depend on "map" vs. "line" orientation.: Refer to issue #3643 for further discussion Sandro Santilli
02:34 PM Bug report #4427 (Closed): Disable options for interpretation of above/below and distancing when ...: The following changes since commit:a2a6e78675833a4db0286a85354bf168032d2b49:
Juergen E. Fischer (1):
more c... Sandro Santilli
02:17 PM Revision d7b106fe (qgis): Only implement QVariant bug workaround when building against Qt < 4.7.1...: Sandro Santilli
02:05 PM Revision 926b3888 (qgis): Workaround for builds against Qt 4.6.2. Fixes bug #4284.: Sandro Santilli
09:44 AM Revision b2b81366 (qgis): Fix for ticket #4414 (svg indicators for arrows are not shown): Marco -
09:33 AM Revision 232f1617 (qgis): Fix for ticket #4414 (svg indicators for arrows are not shown): Marco -
08:24 AM Bug report #4425: Add a capitalize() function to the expression based labeling engine: A little bit of research on function name in other SQL databases:
postgresql, oracle: initcap( x )
mysql, ms sql: no... Martin Dobias
03:41 AM Bug report #4425 (Closed): Add a capitalize() function to the expression based labeling engine: This probably doesn't require a long description. It'd be useful for the expression based labeling engine to have a c... Mathieu Pellerin - nIRV
08:12 AM Bug report #3643: wrong direction of label direction symbol: Fix pushed to master as r697b35a4.
Sandro Santilli
06:21 AM Bug report #3643: wrong direction of label direction symbol: My "dirsym" branch implements solution 2 of Mayeul (as per this ticket subject).
For solution 1 see bug #4424 Sandro Santilli
06:19 AM Bug report #3643: wrong direction of label direction symbol: The following changes since commit 59be561a4d9100fb2084006c2acc7df5798c52fc:
Juergen E. Fischer (1):
fix wa... Sandro Santilli
06:12 AM Bug report #3643: wrong direction of label direction symbol: I don't really get the meaning of "Map" vs. "Line" orientation, btw Sandro Santilli
06:07 AM Bug report #3643: wrong direction of label direction symbol: How do we reopen this bug ? I personally can't change the "Status" field. Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol: Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not... Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol: Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not... Sandro Santilli
02:51 AM Bug report #3643: wrong direction of label direction symbol: Mayeul: I've filed #4424 for your request. This bug was specifically about the "Add direction symbol".
By the way, n... Sandro Santilli
05:52 AM Bug report #4284 (Closed): error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: Giuseppe Sucameli
05:49 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: Pushed to master by Jef (thanks!).
926b3888a15a25eb4f15d5b3fdc62a08016b20c3
d7b106fed347c4d7dcae546cb65a9a2dd6619ab0 Sandro Santilli
05:32 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: Here (Ubuntu 11.04 and QT 4.7.2) the compilation still works fine and ends without errors before and after your fix. Giuseppe Sucameli
05:19 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: Branch updated to include a version check:
The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd... Sandro Santilli
05:07 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd4e:
marco (1):
Fix for ticket #441... Sandro Santilli
04:25 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: 4.6.2-0ubuntu5.3 is the version in here Sandro Santilli
04:22 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’: It may be a QT bug (QT < 4.7.1), see https://bugreports.qt.nokia.com/browse/QTBUG-8549 Giuseppe Sucameli
03:47 AM Feature request #3488: Expression based labeling: Nathan, good idea.
Bug #4425: capitalize() function
Bug #4426: number_format() function
Cheers. Mathieu Pellerin - nIRV
03:15 AM Feature request #3488: Expression based labeling: nirvn, no worries, Hopefully people find it useful. I would open a ticket if you want some other functions added.
M... Nathan Woodrow
03:45 AM Bug report #4426 (Closed): Add a number_format() function to the QgsExpression: It'd be very useful for have a number_format() function to allow formatting of numbers with grouped thousands. For ex... Mathieu Pellerin - nIRV
02:58 AM Bug report #4424: Label orientation is limited in the left-to-right range: The reference link didn't show up properly, here it is again: #3643 Sandro Santilli
02:49 AM Bug report #4424 (Closed): Label orientation is limited in the left-to-right range: Labels (new symbology, aka ABC) can't be forced to follow line orientation, specifically written upside-down when a l... Sandro Santilli

2011-10-21

01:24 AM Feature request #3843: Rule based labeling: Also, in order for this to be satisfying for the need expressed in #3796, every label "class" will need to be configu... Sandro Santilli
01:16 AM Feature request #3843: Rule based labeling: The cherry-on-cake would then be associating "rules" to "legend items" so that you can toggle visibility of single cl... Sandro Santilli
12:51 AM Bug report #4413: Generating SVG preview takes very long: Wouldn't it be more appropriate to generate the previews during compilation? In my case it takes several minutes to g... Paolo Cavallini
01:51 PM Bug report #4413: Generating SVG preview takes very long: Well, the tmore preview directories / files you have, the longer it takes (with only the standard svg dirs enabled, i... Marco Hugentobler
02:10 AM Bug report #4413 (Closed): Generating SVG preview takes very long: When adding an image to a print layout, the generation of preview from SVG takes a very long time Paolo Cavallini
12:35 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown: Fixed in 232f1617614678115e6c42431a5976fc21f1dd4e Marco Hugentobler
02:11 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown: If I choose an svg indicator for the beginning and end of an arrow, nothing is shown Paolo Cavallini
11:30 PM Feature request #3488: Expression based labeling: Nathan, IMO a capitalize('string') function would be really, really useful alongside uppercase / lowercase. Mathieu Pellerin - nIRV
10:58 PM Feature request #3488: Expression based labeling: Nathan, thanks a gazillion times for this. Mathieu Pellerin - nIRV
08:11 AM Feature request #3488 (Closed): Expression based labeling: The pull request merged. Good work, Nathan! Martin Dobias
08:11 AM Feature request #3488 (Closed): Expression based labeling: The pull request merged. Good work, Nathan! Martin Dobias
10:07 PM Revision 500c538b (qgis): [FEATURE] Delete fields in shapefiles (finally!): This is currently supported only by development versions of GDAL/OGR.
GDAL 1.8.x does _not_ support this feature. Martin Dobias
07:13 PM Revision d956a64b (qgis): Fix install: Martin Dobias
06:51 PM Revision 5b2f944a (qgis): Allow setting I/O encoding for OGR layers in vector layer properties.: Until now this was only possible to set when opening files with QgsEncodingFileDialog.
Layers opened from browser wer... Martin Dobias
05:07 PM Revision 5b53d93d (qgis): Merge branch 'master' of https://github.com/qgis/Quantum-GIS: Martin Dobias
05:02 PM Revision bd5a31b5 (qgis): Fixed a typo, added GUI_EXPORT: Martin Dobias
10:20 AM Feature request #3483: Unified topological editing: FYI: I've started a project on github for postgis topology editing. At least will serve for brainstorming.
https://g... Sandro Santilli
10:08 AM Revision 513f1c39 (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Tim Sutton
03:38 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: Alister Hood wrote:
> I have spent some more time trying to understand this.
> For the record:
> - srs.db is not sync... Jürgen Fischer
03:09 AM Bug report #4423 (Closed): "Invert colour map" checkbox loses the right state: Invert colour map checkbox (in raster properties) option is bugged: the flag is unchecked when re-opening the raster ... Paolo Cavallini
03:07 AM Bug report #4422 (Closed): Tileslider not working: The tile scale apparently does not work Paolo Cavallini
03:04 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats: Rasterlite layers, e.g. http://download.gfoss.it/TrueMarble/TrueMarble-2km.sqlite are extremely slow to open (I remem... Paolo Cavallini
03:02 AM Bug report #4420 (Closed): Editing label properties makes labels disappear: If I edit label properties with the button (close to rotate label), the label disappears Paolo Cavallini
03:01 AM Bug report #4419 (Closed): Improve random colour ramps: The random colour ramps are generally ugly, and often colours are repeated Paolo Cavallini
03:00 AM Bug report #4418 (Closed): Random colour ramp: randomize missing: A button "Randomize" is missing for random colour ramps (currently one has to change the number of classes to have a ... Paolo Cavallini
02:59 AM Bug report #4417 (Closed): editing widgets: "slider range" and "dial range" do not show any value...: In the editing widgets, the "slider range" and "dial range" widgets do not show any value when moving or rotating (by... Paolo Cavallini
02:59 AM Bug report #4416 (Closed): Measure area wrong if ellipsoid off: The measure area tool seems to be wrong when started with the ellipsoid off (measures are doubled); switching ellipso... Paolo Cavallini
02:57 AM Bug report #4415: Centroid in fTools different form centroid fill: From the ML (thanks cfarmer):
IIRC, the centroid as returned by fTools is based on the GEOS centroid
calculation, wh... Paolo Cavallini
02:56 AM Bug report #4415 (Closed): Centroid in fTools different form centroid fill: the centroid, as calculated by fTools, is not in the same location as the centroid shown by the centroid fill. The di... Paolo Cavallini

2011-10-20

01:40 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: I have spent some more time trying to understand this.
For the record:
- srs.db is not synced when installing from so... Alister Hood
12:36 AM Revision b0112f1c (qgis): Merge pull request #52 from brushtyler/raster-transparency: [BACKPORT] Handle raster layer's transparency band while rendering (fix #2491) Tim Sutton
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy: That's intentional. Try running ... Jürgen Fischer
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy: That's intentional. Try running ... Jürgen Fischer
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy: That's intentional. Try running ... Jürgen Fischer
10:20 PM Revision 188d7335 (qgis): Fix indentation: Martin Dobias
09:42 PM Revision 847204e1 (qgis): Merge branch 'master', remote-tracking branch 'nathan/expression-labels': Martin Dobias
09:48 AM Feature request #3483: Unified topological editing: I'd like to avoid too much abstraction on the PostGIS side actually.
All I can tell is that for postgis topology you... Sandro Santilli
07:17 AM Feature request #3483: Unified topological editing: The main issue we are facing here is that the topological models of various data sources (grass, postgis-topo, osm) d... Martin Dobias
08:00 AM Feature request #3488: Expression based labeling: I am also in favor of keeping the current design. Further improvements may be added later if needed. Martin Dobias

2011-10-19

12:33 AM Revision 5e45bda4 (qgis): german translation update: Jürgen Fischer
11:56 PM Feature request #4405: Updates to the field calculator context help: Oh, here's another one, to make the formatting consistent.
Alternatively we could identify the other function argume... Alister Hood
06:58 PM Feature request #3483: Unified topological editing: Some ideas [[http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7638]... Luís Ferreira
05:20 PM Revision aa3a5a06 (qgis): translation update: hr by Zoran: Werner Macho
02:46 PM Feature request #3488: Expression based labeling: There is a real time search at the top that limits the entries to show only stuff with that keyword.
The tab idea is... Nathan Woodrow
02:33 PM Feature request #3488: Expression based labeling: Can I suggest a discussion/brainstorm on the UI?
I can imagine that with the full list of operators and a large numbe... Alister Hood
05:40 AM Feature request #3488: Expression based labeling: Pull request made https://github.com/qgis/Quantum-GIS/pull/51
Still a few things to add later on but if it could be ... Nathan Woodrow
02:45 PM Revision 665e92e4 (qgis): revert changes to old QgsLabel class: Nathan Woodrow
01:56 PM Revision b62daee5 (qgis): Handle raster layer's transparency band while rendering (fix #2491): Giuseppe Sucameli
05:51 AM Bug report #4399 (Closed): Browser does not allow to tell which layer format to load: Martin Dobias
05:50 AM Bug report #4399: Browser does not allow to tell which layer format to load: Tooltips added in commit:c3f6dff9 Martin Dobias
05:51 AM Bug report #4387 (Closed): New labelling: "add direction symbol" does not make sense for polygons...: Martin Dobias
05:51 AM Bug report #4387: New labelling: "add direction symbol" does not make sense for polygons and points: Fixed in commit:3a15509b Martin Dobias
05:49 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.: Fixed in commit:b1e50385 Martin Dobias
05:49 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.: Fixed in commit:b1e50385 Martin Dobias
05:37 AM Bug report #2491: Raster transparency doesn't handle alpha channel: Here's the pull request: https://github.com/qgis/Quantum-GIS/pull/52 Giuseppe Sucameli
04:58 AM Bug report #4412 (Closed): ftools: input layers are not presented in alphabetical order: This makes very hard to select the input layer when working with more than 10/20 layers. Giovanni Manghi
04:55 AM Bug report #4411 (Closed): Silent WMS errors: Whenever a WMS interaction goes bad for any reason (in my case the WMS server advertises wrong service url, resulting... Sandro Santilli
04:50 AM Bug report #4410 (Closed): "forward transform of... failed with error: latitude or longitude exce...: When you now add a vector or raster in a projected CRS and the project is in WGS84 (examples) with OTFR off QGIS thro... Giovanni Manghi
04:31 AM Bug report #4409 (Closed): Weird behaviour on Mac OS: Don't know if this is supposed to be so or I didn't set something correctly, but on my Mac OS (Snow Leopard), QGis 1.... Dejan Gambin
04:10 AM Revision 3a15509b (qgis): Enable "add direction symbol" only for line layers (#4387): Martin Dobias
04:02 AM Revision 2572388c (qgis): Move selectWidget() and dataCapabilities() to data items file where it ...: Martin Dobias
04:01 AM Revision c2190454 (qgis): Separate GDAL data items from provider code: Martin Dobias
03:49 AM Revision b28c9101 (qgis): Separate OGR data items from provider code: Martin Dobias
03:24 AM Revision f15622f6 (qgis): Properly support OGR sublayers (with createChildren) to avoid #4400: Martin Dobias
02:38 AM Revision bfb4d0f3 (qgis): Add a default icon for data collections: Martin Dobias
02:31 AM Revision b1e50385 (qgis): Fix refresh of postgis schema in browser (#4400): Martin Dobias
02:29 AM Bug report #4408 (Open): Validating *.qgs or *.qml against *.dtd: It's not possible to validate a QGIS project or style file against the called *.dtd (http://mrcc.com/qgis.dtd). Two r... Marco Lechner
02:16 AM Feature request #4407 (Open): Provide an entry for the magic(5) file: The magic file, usually /etc/magic for local entries on a debian-based system, is the file used to tell what kind of ... Sandro Santilli
02:04 AM Revision 5b89a32e (qgis): Generic icon for raster layers in browser: Martin Dobias

2011-10-18

01:36 AM Revision c3f6dff9 (qgis): Show full path of gdal/ogr layers as a tooltip (#4399): Martin Dobias
01:13 AM Feature request #4406 (Closed): WMS layer abstract not readable (single-line): WMS layer abstracts aren't readable when longer than a few words. This is because the abstract is reported on a singl... Sandro Santilli
12:15 AM Feature request #4405: Updates to the field calculator context help: > This patch set adds help for recently implemented functions as well as translating some terms into English ;) or ju... Alister Hood
12:11 AM Feature request #4405 (Closed): Updates to the field calculator context help: This patch set adds help for recently implemented functions as well as translating some terms into English ;) or just... Alister Hood
12:11 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: Oh, sorry, you said GDAL, not Proj. So maybe I need to rebuild Gdal.
Alister Hood
12:09 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong: Oh, OK. I had a look at crssync, but I didn't quite understand it, and when I saw the syncs in the git log I didn't ... Alister Hood
11:52 PM Bug report #4404 (Feedback): NZMG and other NZGD49 based CRSs are wrong: the srs.db is synced with GDAL on install (see crssync) - so if you're seeing bad definitions, they are probably from... Jürgen Fischer
07:18 PM Bug report #4404 (Closed): NZMG and other NZGD49 based CRSs are wrong: It seems that #3136 has been reverted by syncing srs.db with a faulty and unreleased (see http://trac.osgeo.org/proj/... Alister Hood
10:11 PM Feature request #4281: More user friendly handling of geometryless tables and layers loaded by a ...: > 2) It would probably be less confusing if the symbology tab was not shown for a geometryless table.
Also, the CRS ... Alister Hood
04:24 PM Feature request #4403 (Closed): Attributes when using Dissolve on a polygon layer: Giovanni Manghi
04:24 PM Feature request #4403: Attributes when using Dissolve on a polygon layer: duplicate of #4382 Giovanni Manghi
02:50 PM Feature request #4403 (Closed): Attributes when using Dissolve on a polygon layer: In Qgis you can dissolve a polygon layer by the Geoprocessing tools.
But as far as I can see you can not control wh... magerlin -
04:24 PM Feature request #4382: ftools: when using the DISSOLVE tool allow controlling how will result the...: see also #4403 Giovanni Manghi
12:41 PM Bug report #4399: Browser does not allow to tell which layer format to load: Thaddeus - wrote:
> Here is an idea, might not be a ... , but ... well .. anyway ..., here it goes: add an advanced-u... Martin Dobias
08:49 AM Bug report #4399: Browser does not allow to tell which layer format to load: Using Tooltips is not a viable option for medium to large size projects, it's only good for one or two layers and occ... Thaddeus -
07:40 AM Bug report #4399: Browser does not allow to tell which layer format to load: I think this solution is optimal, as it follows the behaviour of the legend. Paolo Cavallini
06:05 AM Bug report #4399: Browser does not allow to tell which layer format to load: Would it be sufficient to show the extension (or the complete file name) as a tooltip? Originally we have been showin... Martin Dobias
03:34 AM Bug report #4399 (Closed): Browser does not allow to tell which layer format to load: In current trunk, layers are displayed without the file extension, and the user has no way to tell which format the f... Paolo Cavallini
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used: The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used: The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used: The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:03 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used: Same for me on qGis 1.8.0-Trunk in Win7 environment.
I leave the crash info from the qgis.exe maybe can help:
Nome e... Roberto Socin
07:56 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used: Confirmed in Debian testing, qgis self packaged Paolo Cavallini
07:46 AM Bug report #4402 (Closed): QGIS crashes displaying overview if diagrams are used: Qgis crashes after the following steps:
- starting with a clean project I add a vector layer from file
- I add a dia... Riccardo Mattiuzzo
06:13 AM Bug report #4401 (Closed): debian build - forgotten dependancy: dpkg-buildpackage doesn't check for "libspatialindex-dev" and "libspatialindex1" presence in system in the very begin... Darafei Praliaskouski
06:06 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.: * Load all PostGIS nodes in QBrowser down to show the layers.
* Click refresh
* Layer nodes will disappear until QGIS... Nathan Woodrow

2011-10-17

01:00 AM Bug report #4398 (Closed): diagrams do not superpose: Apparently the diagrams are not allowed to superpose each other. When the size of the diagram (as defined in the "dia... alicebtoklas -
11:06 PM Revision 9d3079b9 (qgis): Merge remote-tracking branch 'upstream/master' into expression-labels: Conflicts:
src/core/qgsexpression.cpp
src/gui/CMakeLists.txt Nathan Woodrow
10:52 PM Revision fc80b602 (qgis): Correct help for upper function: Nathan Woodrow
08:24 PM Feature request #4348: Add features like "creation options" and "no data" for all gdaltools: Just a note to myself or anyone else it helps:
Specifying the nodata value is particularly important for gdal_rasteri... Alister Hood
08:13 PM Revision 139e2973 (qgis): Add icons for browser from Robert (gis theme only): Martin Dobias
06:01 PM Revision 80d7f831 (qgis): More minor fix to IT GUI: root
03:28 PM Revision 047c57c9 (qgis): Add more function help; Fix header email info: Nathan Woodrow
03:21 PM Revision 1cc6bddd (qgis): Revert CMakeList to normal: Nathan Woodrow
01:04 PM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files: erratum:
The attached examples can be opened in QGIS and saved back to SHP: comment-line header is 999. Thaddeus -
01:02 PM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files: Yes, I get the same here: Handle is a string representing a hex value, always starting at hex 20 or so and incrementi... Thaddeus -
10:10 AM Revision feaa671e (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Paolo Cavallini
10:08 AM Revision 93c2fecf (qgis): Fixing typos in IT GUI: Paolo Cavallini

2011-10-16

01:21 AM Feature request #4397 (Closed): (fTools) Check Geometry Validity - Save error messages as new poi...: It would be useful having the option to export the error messages of Check Geometry Validity into a new shapefile
or ... Luca Sigfrido Percich
01:08 AM Bug report #4396 (Closed): (fTools) - Check geometry Validity raises exception clicking on errors...: Using the "Check Geometry Validity" in fTools, the user is presented a Dialog with the list of error messages and pos... Luca Sigfrido Percich
12:31 AM Bug report #4395 (Closed): Move raster commands under "Raster" menu: Zonal statistics, Interpolation and Geomorphology plugins should be moved under the Raster menu for consistency Paolo Cavallini
03:29 PM Bug report #2880 (Closed): makefiles not parallel building proof: As I mentioned before, I haven't seen that happen for quite some time with a high number of workers. Please re-open i... Volker Fröhlich
03:29 PM Bug report #2880 (Closed): makefiles not parallel building proof: As I mentioned before, I haven't seen that happen for quite some time with a high number of workers. Please re-open i... Volker Fröhlich
12:51 PM Revision fd50833e (qgis): Add missing files; add more operators: Nathan Woodrow
09:09 AM Bug report #4394: make clean fails to clean grass files: except find output -type f:
output/bin/source_path.txt
output/python/qgis/__init__.py
output/python/qgis/utils.py
out... Sandro Santilli
09:08 AM Bug report #4394: make clean fails to clean grass files: I must have had a dirty source tree, after git-cleaning it make clean seems to leave no dangling objects in build dir. Sandro Santilli
08:41 AM Bug report #4394: make clean fails to clean grass files: For the record, there's more that fails to be cleaned:... Sandro Santilli
08:39 AM Bug report #4394 (Closed): make clean fails to clean grass files: Building GRASS support in QGIS is driving me nuts.
Part of the problem was "make clean" failing to clean built GRASS ... Sandro Santilli
07:55 AM Bug report #4393 (Closed): Rasterlite layers on Windows as 0,0,0: The current trunk version on Windows does not seem to be able to display
Rasterlite layers, e.g.
http://download.gfos... Paolo Cavallini
05:42 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice: duplicate of #3699 Jürgen Fischer
05:42 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice: duplicate of #3699 Jürgen Fischer
05:21 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice: After successfully building GRASS support, I find no GRASS plugin in the plugin manager.
Manually exporting LD_LIBRAR... Sandro Santilli
05:30 AM Bug report #4390: Could not find GRASS, vanilla GRASS install: Correct, GRASS>6.4.x is not supported Paolo Cavallini
04:46 AM Bug report #4390: Could not find GRASS, vanilla GRASS install: It still fails to find "vect" library. It seems it was renamed to "vector" in 7.0. Sandro Santilli
04:34 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install: Sandro Santilli wrote:
> symlinking grass install dir as /usr/local/grass doesn't help
Use GRASS_PREFIX. Not sure ... Jürgen Fischer
04:34 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install: Sandro Santilli wrote:
> symlinking grass install dir as /usr/local/grass doesn't help
Use GRASS_PREFIX. Not sure ... Jürgen Fischer
04:00 AM Bug report #4390: Could not find GRASS, vanilla GRASS install: symlinking grass install dir as /usr/local/grass doesn't help Sandro Santilli
03:58 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install: I've just installed GRASS (svn trunk) and qgis cmake can't find it.
Won't be easy to find, as it's installed under /u... Sandro Santilli
05:29 AM Bug report #4392 (Closed): GRASS-6.4.1: Incompatible library version for module.: This is what I get after a successful installation of GRASS 6.4.1 (last stable GRASS release):
Incompatible library ... Sandro Santilli
05:08 AM Revision 913e7e78 (qgis): Rename files to fit QGIS coding guidelines: Nathan Woodrow
04:52 AM Revision 02123fb7 (qgis): Update UI spacing: Nathan Woodrow
04:47 AM Revision 7f5e1c81 (qgis): Update comments: Nathan Woodrow
04:33 AM Revision 17d326ee (qgis): Add item from value list on double click: Nathan Woodrow
04:20 AM Revision 5797360c (qgis): Wire up operator buttons: Nathan Woodrow
02:48 AM Feature request #3483: Unified topological editing: See http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7521 for some ... Sandro Santilli
02:48 AM Feature request #3483: Unified topological editing: See http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7521 for some ... Sandro Santilli

2011-10-15

11:39 PM Revision 3996d89a (qgis): Default constructor of QgsProjectParser is private: Marco -
11:36 PM Revision 3d9a0ae9 (qgis): Some xml optimisation for WMS server: Marco -
08:26 PM Bug report #3977: Bogus missing CRS error: Whoops, just noticed the two SHPs have different coordinate systems. I regret that I do not remember which SHPs I was... Aren Cambre
08:24 PM Bug report #3977: Bogus missing CRS error: I've uploaded two SHPs to https://locker.smu.edu/xythoswfs/webui/_xy-1905192_1-t_VKORAv6z. One is a SHP of all school... Aren Cambre
06:26 AM Bug report #3977: Bogus missing CRS error: Aren Cambre wrote:
> It even happens if both layers have this CRS:
> > +proj=longlat +ellps=WGS84 +datum=WGS84 +no_de... Giovanni Manghi
06:23 AM Bug report #3977 (Feedback): Bogus missing CRS error: I'm almost sure that ftools tools need to all the input vectors to be in the same CRS. Carson (the toolbox author), c... Giovanni Manghi
07:48 PM Bug report #4389 (Closed): Attribute table show and edit unselected record in edit form: Open attribute table for layer with some records.
Select one record (not first).
"show selected" option = enabled.
Tr... Cyril Sobolev
06:04 PM Revision b3bebf3a (qgis): WMS server: avoid reading layer symbology if the request does not come ...: Marco -
05:10 PM Bug report #4388 (Closed): gdal raster provider does not use Offset and Scale raster properties: When QGis opens a GDAL raster with Offset and Scale properties, it does not recognize these values and the displayed ... Etienne Tourigny
03:44 PM Revision 54754f15 (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Marco -
01:11 PM Bug report #4096: Referenced layers do not use relative paths if set in project properties: This does happen inconsistently and unexpectedly. Here is an example: This shapefile should have no path as it is in ... Gavin Fleming
01:11 PM Bug report #4096: Referenced layers do not use relative paths if set in project properties: This does happen inconsistently and unexpectedly. Here is an example: This shapefile should have no path as it is in ... Gavin Fleming
12:58 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...: #2129 is the request to set WGS 84 automatically for GPX.
I often load GPX files into a map that has a UTM CRS and t... Steven Mizuno
06:51 AM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...: Steven Mizuno wrote:
> As I understand the GPX standard all points are WGS 84, longitude/latitude in degrees.
> refe... Giovanni Manghi
06:49 AM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...: As I understand the GPX standard all points are WGS 84, longitude/latitude in degrees.
refer to: http://www.topograf... Steven Mizuno
11:07 AM Bug report #4222 (Feedback): Diagram overlays do not show in print composer: Jürgen Fischer
10:10 AM Bug report #4222: Diagram overlays do not show in print composer: Everything looks fine in the composer window but image/SVG output is not ok. Only some diagrams are contained in the ... Anita Graser
08:58 AM Revision 0359e5b4 (qgis): Merge branch 'expression-labels' of github.com:NathanW2/Quantum-GIS int...: Nathan Woodrow
08:56 AM Revision 4e6f83b3 (qgis): Remove red highlight from textarea; show expresion invaild note in prev...: Nathan Woodrow
07:45 AM Bug report #4387 (Closed): New labelling: "add direction symbol" does not make sense for polygons...: or at least it does not have any effect. But as far as I understand it should be available only for lines. Giovanni Manghi
07:37 AM Bug report #4386 (Closed): ftools: raster layers are shown as possible input layers: see subject. In most of the tools this does not make sense. Giovanni Manghi
07:35 AM Bug report #4385 (Closed): Labelling window do not resize correctly: Noticed on both Ubuntu and Windows. See attached image. Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer: see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer: see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer: see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer: see also #3843 Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling: I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:14 AM Bug report #2352: map is drawn twice on toggling a layer's visibility: merged with #2596 Giovanni Manghi
07:14 AM Bug report #2352: map is drawn twice on toggling a layer's visibility: merged with #2596 Giovanni Manghi
07:14 AM Bug report #2596: avoid useless canvas redraws: another useless redraw, see #2352 Giovanni Manghi
07:11 AM Feature request #4384 (Closed): ftools: expose an (geos) option in the qgis gui to do some snappi...: See #3126-15 and #3126-16
The case
#2806
#3126
merging polygons with "dirty" geometries (0 size areas, sliv... Giovanni Manghi
06:55 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields: Martin Dobias wrote:
> What about just doing a concatenation of ATT1 with ATT2 in a new field and then using categori... Giovanni Manghi
06:30 AM Feature request #4383 (Closed): ftools: Improve how processes are handled: See also #3810-6
The suggestion would be to improve them the same way as the gdal tools processes are handled: lau... Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash: So closing this and opening a feature request one instead. Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash: So closing this and opening a feature request one instead. Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash: So closing this and opening a feature request one instead. Giovanni Manghi
06:24 AM Feature request #3628: Densify features: Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features: Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features: Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features: Please consider supporting the development of such tool. Giovanni Manghi
06:00 AM Bug report #2733: fTools Add geometry column fails to add XCOORD if source is GPX file or PostGIS...: Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ... Giovanni Manghi
06:00 AM Bug report #2733: fTools Add geometry column fails to add XCOORD if source is GPX file or PostGIS...: Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ... Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...: Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ... Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...: Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ... Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...: Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ... Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?: I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?: I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?: I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:25 AM Bug report #2806 (Closed): ftools.dissolve and geoprocessing.dissolve "loose" polygons: Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons: The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons: The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons: The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons: The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons: The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
03:14 AM Bug report #4261 (Feedback): "Merge shapefiles to one" gives bad results: Please leave feedback and sample data to allow the dev to make further tests. Giovanni Manghi
03:12 AM Feature request #4382 (Closed): ftools: when using the DISSOLVE tool allow controlling how will r...: This is already possible for example with the "merge selected features" tool in the "advanced digitizing" toolbar. Giovanni Manghi
02:58 AM Bug report #4105 (Feedback): "Select by location" does not work with layers having different CRS ...: Giovanni Manghi
02:58 AM Bug report #4105: "Select by location" does not work with layers having different CRS and "on the...: I think it is safe to say that ftools tools (the vector menu) works only if the input layers are in the same CRS. Car... Giovanni Manghi

2011-10-14

05:11 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...: Steven Mizuno wrote:
> GPX files should always be in WGS 84 (epsg:4326) so there is no reason for the user to set the... Giovanni Manghi
04:49 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...: GPX files should always be in WGS 84 (epsg:4326) so there is no reason for the user to set the CRS (and QGIS shouldn'... Steven Mizuno
08:42 AM Bug report #4376 (Closed): QGIS doesn't ask for the CRS when loading GPX files, but it does when ...: If in "Options -> CRS -> coordinate reference system for new layers" a user set "prompt for CRS", then QGIS will ask ... Giovanni Manghi
05:10 PM Bug report #4375: Zoom to layer extent does not work for a point layer with a single point.: Also occurs on two (or more) points having the same x- or y-coordinate, or a line that is exactly vertical or horizon... Steven Mizuno
05:04 PM Bug report #4381 (Closed): Saving a shape as DXF ("save as...") leads to corrupted files: During a training course I have been pointed that almost any vector saved as dxf in QGIS (using "save as..."), does n... Giovanni Manghi
04:03 PM Revision fb6d5512 (qgis): Add error item to facilitate error handling: Martin Dobias
04:03 PM Revision e045d346 (qgis): Move WMS data items to separate file: Martin Dobias
04:03 PM Revision 30a67667 (qgis): Refresh item also when it had no children (they could be added in meanw...: Martin Dobias
04:03 PM Revision befb5f65 (qgis): WMS: add/edit/delete connection from data items: Martin Dobias
02:04 PM Feature request #4378: Allow categorized symbology with (up to) 3 fields: What about just doing a concatenation of ATT1 with ATT2 in a new field and then using categorized symbol renderer on ... Martin Dobias
08:59 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields: Martin Dobias wrote:
> Maybe using field calculator would be a better solution rather than adding such functionality ... Giovanni Manghi
08:55 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields: Maybe using field calculator would be a better solution rather than adding such functionality directly to categorized... Martin Dobias
08:51 AM Feature request #4378 (Closed): Allow categorized symbology with (up to) 3 fields: Imagine to have two attributes ATT1 and ATT2, with the following values
ATT1 | ATT2
A | C
B | D
then making the ca... Giovanni Manghi
01:34 PM Bug report #4380 (Closed): geojson data not displayed when first feature geometry is null: I had a data set in geojson format where the geometry of the first feature is null. Apparently, this bothers QGIS at ... Claude Paroz
09:10 AM Bug report #4379 (Closed): if "Options -> CRS -> coordinate reference system for new layers" is s...: See subject -> asking for CRS for a new shapefile layer does not make sense, also because in the following dialog it ... Giovanni Manghi
08:45 AM Bug report #4377 (Closed): if "Options -> CRS -> coordinate reference system for new layers" is s...: See subject -> asking for CRS for a map that need to be georeferenced it doesn't make any sense. Giovanni Manghi
08:04 AM Revision 2ef1772f (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Tim Sutton
07:05 AM Bug report #4372 (Closed): QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS: Martin Dobias
07:05 AM Bug report #4372: QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS: fixed in commit:30a676678 Martin Dobias

2011-10-13

10:43 PM Bug report #4375 (Closed): Zoom to layer extent does not work for a point layer with a single point.: Just what the title says.
It does not matter whether or not on-the-fly projection is enabled.
But note that "Zoom fu... Alister Hood
09:05 PM Revision 69fc3038 (qgis): Fix for ticket #4308: Marco Hugentobler
08:55 PM Revision ae75e9ba (qgis): Fix for ticket #4308: Marco Hugentobler
08:55 PM Revision 10d81dd7 (qgis): Insert date value in attribute editor: Marco -
12:50 PM Feature request #4374 (Open): Support keyword substitution in provider queries: When fetching features from a query it would be useful to allow using keywords to be substituted on each fetching.
Su... Sandro Santilli
09:56 AM Revision f8ed801d (qgis): Fix for ticket #4308: Marco Hugentobler
08:53 AM Feature request #4373 (Closed): Merge from Template, a new feature for Composer.: The current (QGIS1.7.1) "Load from Template" wipes out all existing composer objects before importing from the templa... Thaddeus -
06:43 AM Bug report #4191: Raster clipper does not work with a shp mask: Hi Giuseppe,
I have just tested it in QGIS 1.7.1-Wroclaw Wroclaw, e6718b6 (bundled with GDAL/OGR 1.8.1) installed on ... Andrea Borruso

2011-10-12

01:04 AM Bug report #4308 (Resolved): Interpolation and Terrain core plugins: do not add custom names?: Fixed in f8ed801daee4ff5dfc97c7254eecd34bc7fb1182 Marco Hugentobler
07:06 AM Revision ac923a86 (qgis): debian packaging update: Jürgen Fischer
02:26 AM Bug report #4372 (Closed): QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS: * Open QGIS with no connections added for PostGIS, WMS or WFS.
* Create connection using normal dialog.
* Press refre... Nathan Woodrow
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor: This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo... alobo -
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor: This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo... alobo -
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor: This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo... alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming: Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n... alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming: Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n... alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming: Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n... alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming: Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n... alobo -

2011-10-08

01:13 AM Bug report #4368 (Rejected): Union tool creates shapefile with missing polygons: Duplicate of #3581. Please check carefully before opening a ticket Paolo Cavallini
01:13 AM Bug report #4368 (Rejected): Union tool creates shapefile with missing polygons: Duplicate of #3581. Please check carefully before opening a ticket Paolo Cavallini
01:40 PM Bug report #4368 (Closed): Union tool creates shapefile with missing polygons: When unioning shapefiles in QGIS, the process gets to about 6% and finishes, leaving a layer that is unioned correctl... Andrew Joseph
10:24 PM Revision acb921b1 (qgis): osgeo4w update: use external libspatialindex: Jürgen Fischer
10:05 PM Revision cf5e790f (qgis): debian packaging update: use libspatialindex on more distributions: Jürgen Fischer
07:28 PM Revision 0782a34c (qgis): fix last commit: Jürgen Fischer
01:46 PM Revision c02421a0 (qgis): finish #4111:: - apply missing bits
- update internal spatialindex copy to 1.6.1
- update debian packaging to use external library Jürgen Fischer
08:44 AM Bug report #3790: OTF Raster Reprojection artifacts (at some scales): I fotgot to mention the strange no data data value (-340282346638528859811704183484516925440.000000) on the *.ADF fil... Thaddeus -
03:05 AM Bug report #4111: Build with current external spatialindex lib: Tim Sutton wrote:
> I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes ... Jürgen Fischer
03:04 AM Bug report #4111: Build with current external spatialindex lib: volter - wrote:
> The question was actually meant as a joke.
careful, bad things can happen with 10€ ;) http://www.... Jürgen Fischer
03:02 AM Feature request #4367 (Closed): Include i.landsat toar & i.landsat.acca in Grass Plugin for QGIS: This request comes from my own interest in the use of Landsat imagery, and my belief that Landsat would be of greater... Bill Williamson

2011-10-07

12:09 AM Bug report #4157: Empty map composer on reopen project: Giovanni, I was the one opening this ticket for the first time in the old tracker. I don't know what exactly was caus... Goyo D
11:29 PM Revision 356c87ba (qgis): Apply partial patch from #4111 to allow using separate spatialindex lib...: Tim Sutton
07:49 PM Bug report #3790: OTF Raster Reprojection artifacts (at some scales): I tried real hard to upset QGIS selecting all kind of reprojections and color map settings, but it did pretty good: I... Thaddeus -
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales): This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales): This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales): This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales): This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
07:30 PM Bug report #4158 (Closed): Zoom to layer extent does not take into account labels: Nathan Woodrow
07:27 PM Bug report #4158: Zoom to layer extent does not take into account labels: Yeah, I kind of figured that was the case. And, now that I think about it, I'm not even sure that would be desirable ... mattwigway .
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels: Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels: Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels: Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
06:15 PM Revision f39a19c1 (qgis): [API] add QgsVectorLayer::updateFeature(): Jürgen Fischer
06:13 PM Revision cb7d3ed2 (qgis): fix warning: Jürgen Fischer
02:33 PM Bug report #4111 (Fixed for bounty): Build with current external spatialindex lib: Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib: Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err... Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib: Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err... Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib: Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err... Tim Sutton
12:19 PM Bug report #4141 (Closed): Problem installing plugins: duplicate of #4303 Giovanni Manghi
12:19 PM Bug report #4141 (Closed): Problem installing plugins: duplicate of #4303 Giovanni Manghi
12:16 PM Bug report #4140 (Feedback): projection problem with QGIS 1.7 "--snapshot": I can't understand where is the issue with projections. Seems to me that is just a matter of extent/scale difference ... Giovanni Manghi
12:12 PM Bug report #3466: Extremely Bloated PDF Vector Export under Win.: Yes please, check with qgis 1.7.1 or trunk and report back.
I will attach here the result of exporting your project ... Giovanni Manghi
12:12 PM Bug report #3466: Extremely Bloated PDF Vector Export under Win.: Yes please, check with qgis 1.7.1 or trunk and report back.
I will attach here the result of exporting your project ... Giovanni Manghi
11:58 AM Bug report #4335: Raster legend: no values are shown for GRASS rasters: see also #1051 Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab: It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ... Giovanni Manghi
11:44 AM Feature request #4357: On/Off checkbox for Composer Objects: Oops, I was really focused on the paper space, the Composer, but I never qualified that "label" word with Composer la... Thaddeus -
11:02 AM Feature request #4357: On/Off checkbox for Composer Objects: Seems to me that this ticket explain very well a situation that could be solved the way is suggested (a checkbox for ... Giovanni Manghi
11:02 AM Feature request #4357: On/Off checkbox for Composer Objects: Seems to me that this ticket explain very well a situation that could be solved the way is suggested (a checkbox for ... Giovanni Manghi
11:16 AM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.: I was unable to replicate this: tried this under Win2k and QGIS 1.7.1. Thaddeus -
10:00 AM Bug report #4293 (Feedback): QGIS crashes when applying Graduated Symbol symbology.: Eduardo Bieñkowski wrote:
> Run QGIS 1.7 on Win XP, got the same problem.
> It ran on another machine with ubuntu 32 ... Giovanni Manghi
10:14 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: see also #4364
Moreover:
when adding a class in the "categorized" symbology it is always added as last (as already... Giovanni Manghi
10:13 AM Feature request #4364 (Closed): Symbology classes reordering: see also #4334 Giovanni Manghi
10:13 AM Feature request #4364 (Closed): Symbology classes reordering: see also #4334 Giovanni Manghi
05:31 AM Feature request #4364 (Closed): Symbology classes reordering: Hi,
I just faced following problem (QGIS 1.7, Windows) - I created a nice symbology for my point layer. Finally, I fo... Jhelebrant -
09:34 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious: Please reopen if I understand wrong the issues:
in QGIS trunk you can now select multiple symbology classes, right c... Giovanni Manghi
09:34 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious: Please reopen if I understand wrong the issues:
in QGIS trunk you can now select multiple symbology classes, right c... Giovanni Manghi
09:21 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious: I noticed this issue a few months ago and it has niggled me a few times since then.
It's only now that I've used ArcM... Robin Lovelace
09:34 AM Bug report #3275: Allow change ALL symbol properties when selecting multiple classes (in new symb...: see also #4366 Giovanni Manghi
08:44 AM Feature request #4365 (Closed): Add log/ln functions to the field calculator: Subject says it all Giovanni Manghi
08:34 AM Feature request #4358: Implement an item "tree" for composers: A simple Listbox/Dropdown Listbox listing all the objects for selection would do: it better than editing the zValue m... Thaddeus -
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers: New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers: New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers: New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers: New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:22 AM Feature request #4358: Implement an item "tree" for composers: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you the controls that ... Nathan Woodrow
02:58 AM Feature request #4358 (Closed): Implement an item "tree" for composers: It is a "classical" way handle objects, the one used by powerpoint/impress for example. I can't see here a bug nor a ... Giovanni Manghi
02:58 AM Feature request #4358 (Closed): Implement an item "tree" for composers: It is a "classical" way handle objects, the one used by powerpoint/impress for example. I can't see here a bug nor a ... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool: I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool: I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool: I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool: I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool: I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne... Giovanni Manghi
03:35 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry: Overwrite @feat@ with a new feature invalidate the geometry reference. You need to copy the geometry. But the retri... Jürgen Fischer
03:35 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry: Overwrite @feat@ with a new feature invalidate the geometry reference. You need to copy the geometry. But the retri... Jürgen Fischer
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable: Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue... Giovanni Manghi

2011-10-06

01:38 AM Revision 6ccb04e9 (qgis): Merge remote-tracking branch 'brushtyler/master': Conflicts:
src/providers/postgres/qgspostgresprovider.cpp Giuseppe Sucameli
01:36 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry: Objective is simple, i want to change the geometry of point 1 by copying the geometry of point 2 into geometry of poi... sebastien rey
01:26 AM Revision dd6a5941 (qgis): [FEATURE] Make the gdaltools command editable to fix #3041: Giuseppe Sucameli
10:46 PM Feature request #4362 (Closed): File dialogues should recognise VRT files with .ovf and .ovr exte...: I think it is kind of conventional for VRT files to have the extension .ovf if they are for vector data, and .ovr if ... Alister Hood
10:10 PM Bug report #4361: Edit button is not updated when provider query makes a layer read-only: example vrt Alister Hood
10:10 PM Bug report #4361: Edit button is not updated when provider query makes a layer read-only: example vrt Alister Hood
10:08 PM Bug report #4361 (Closed): Edit button is not updated when provider query makes a layer read-only: Quoting from a mention in #3052:
As soon as you place a query on a shapefile, it's capabilities drop from 975 to 704,... Alister Hood
08:17 PM Bug report #2951: Layers become non-editable: Should we close this as invalid again?
I don't see anything that is awaiting feedback. Alister Hood
08:17 PM Bug report #2951: Layers become non-editable: Should we close this as invalid again?
I don't see anything that is awaiting feedback. Alister Hood
04:44 PM Feature request #3041 (Closed): Make the GdalTools command window editable: Paolo Cavallini wrote:
> making major changes to the existing plugin is essentially a waste of time
Without the sync... Giuseppe Sucameli
04:44 PM Feature request #3041 (Closed): Make the GdalTools command window editable: Paolo Cavallini wrote:
> making major changes to the existing plugin is essentially a waste of time
Without the sync... Giuseppe Sucameli
02:21 PM Revision 81541031 (qgis): Merge branch 'master' of github.com:qgis/Quantum-GIS: Tim Sutton
02:16 PM Bug report #4111: Build with current external spatialindex lib: The question was actually meant as a joke. Volker Fröhlich
02:06 PM Revision 7e059aff (qgis): Added simple script to generate a tarball: Tim Sutton
01:01 PM Feature request #4358 (Closed): Implement an item "tree" for composers: I was trying to hide from printing/exporting a label by sending it to back, but now I cannot figure out how to bring ... Thaddeus -
12:59 PM Feature request #4357 (Closed): On/Off checkbox for Composer Objects: There are cases where I do not want to print/export some labels -- call it a special printout version --, so I delete... Thaddeus -
09:14 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...: Hi Giovanni, sorry about the confusion: all the notes and comments on the QGIS canvas screenshot were mainly taking n... Thaddeus -
05:26 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...: > * The folloowing feature request make sense and I will open a proper ticket for it: "_How can I tell which of the ... Giovanni Manghi
05:05 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...: Hi Thaddeus, I can confirm the issue. Nevertheless I found not very handy to have many notes/feature_requests/describ... Giovanni Manghi
09:07 AM Bug report #3028: Displacement between vector and WMS layers after printing: Just made a quick check on QGIS 1.7.1 and it works great: no displacement anymore and I the SHP is rendered as PS str... Thaddeus -
09:04 AM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...: Steps to reproduce:
1. Get a layer with lots of features (mine had 900).
2. Turn on editing.
3. Select many features ... mattwigway .
09:01 AM Feature request #4353 (Closed): Show raster bands being used in the TOC: duplicate of #4144 Giovanni Manghi
09:01 AM Feature request #4353 (Closed): Show raster bands being used in the TOC: duplicate of #4144 Giovanni Manghi
05:25 AM Feature request #4353 (Closed): Show raster bands being used in the TOC: This feature request was made originally by Thaddeus in ticket #4138
When working with multiband rasters the only pl... Giovanni Manghi
09:01 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.: see also #4353 Giovanni Manghi
09:01 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.: see also #4353 Giovanni Manghi
08:58 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.: Well, I'm just saying that having the information on more than one place is a good thing: being able to copy that (as... Thaddeus -
08:34 AM Bug report #3466: Extremely Bloated PDF Vector Export under Win.: This was a while ago: I'll recheck on this using the 1.7.7 later. This is using the QGIS' "Export as PDF" functionali... Thaddeus -
08:21 AM Bug report #4157 (Closed): Empty map composer on reopen project: This was somehow already fixed.
I've tested it on qgis-trunk and it behaves as expected. If closing a saved project ... Giovanni Manghi
08:21 AM Bug report #4157 (Closed): Empty map composer on reopen project: This was somehow already fixed.
I've tested it on qgis-trunk and it behaves as expected. If closing a saved project ... Giovanni Manghi
03:37 AM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.: Thaddeus - wrote:
> Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 in... Giovanni Manghi
03:37 AM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.: Thaddeus - wrote:
> Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 in... Giovanni Manghi
03:15 AM Bug report #2596: avoid useless canvas redraws: another useless redraw:
when the identify window is set to be opened docked but it is not (yet) visible: picking the... Giovanni Manghi
03:05 AM Bug report #4302 (Closed): Can't use 'Geostationary Satellite View' projection: Steven Mizuno wrote:
> So far as I can tell there isn't anything in QGIS to fix.
Then Ricardo please file this ticke... Giovanni Manghi
03:05 AM Bug report #4302 (Closed): Can't use 'Geostationary Satellite View' projection: Steven Mizuno wrote:
> So far as I can tell there isn't anything in QGIS to fix.
Then Ricardo please file this ticke... Giovanni Manghi
03:03 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10: I'm not really sure this is a QGIS issue... Giovanni Manghi
02:23 AM Bug report #4328 (Closed): Fix for python output directory not being correctly created for Win32: Ignore this pull request. I have subsequently cleaned my build environment and started a fresh build and this issue n... Jeremy Palmer
02:23 AM Bug report #4328 (Closed): Fix for python output directory not being correctly created for Win32: Ignore this pull request. I have subsequently cleaned my build environment and started a fresh build and this issue n... Jeremy Palmer

2011-10-05

01:01 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10: Arcgis does not allow the user to choose the enconding when opening a vector, as QGIS does? Giovanni Manghi
01:01 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10: Arcgis does not allow the user to choose the enconding when opening a vector, as QGIS does? Giovanni Manghi
12:02 AM Revision f09417db (qgis): Added gource script (thanks Nathan) and qgis download stats: Tim Sutton
10:26 PM Feature request #3041: Make the GdalTools command window editable: IMO it is better to move the plugin to the new analytical infrastructure, so making major changes to the existing plu... Paolo Cavallini
03:55 PM Feature request #3041: Make the GdalTools command window editable: > It seems to have understand that one major problem would be maintain the GUI in sync with the command windows.
If ... Alister Hood
02:44 PM Feature request #3041: Make the GdalTools command window editable: no popups please, they are a pain in the butt. I think just disabling all the controls would be the better way to go... Nathan Woodrow
01:08 PM Feature request #3041: Make the GdalTools command window editable: It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
01:08 PM Feature request #3041: Make the GdalTools command window editable: It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
01:08 PM Feature request #3041: Make the GdalTools command window editable: It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
10:20 PM Bug report #4352 (Closed): Point Displacement Render: Invalid Offset when only one geometry: When using the point displacement rendering plugin it seems that in the case where is only one geometry (no collision... Andreas Neumann
04:46 PM Revision 107247e8 (qgis): Add method to access label string as expression, QgsExpression only cre...: Nathan Woodrow
10:25 AM Revision 514d121e (qgis): Fix label id for GetPrint in composer: Marco Hugentobler
09:40 AM Bug report #4351 (Closed): "Select Attributes" dialog in Print Composer needs Scrollbar: the "Select Attributes" dialog when adding an Attribute Table in Print Composer can grow too long for the screen. The... Anita Graser
08:40 AM Bug report #4350 (Closed): Handle HTML content in RSS feed for OpenSearch results: QGIS should be able to display RSS feeds properly for WMS searches. The release notes for QGIS 1.5 state that QGIS sh... Augustus Kling
03:52 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.: Duplicate #3041 Alexander Bruy
03:52 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.: Duplicate #3041 Alexander Bruy
02:54 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.: The dialogues for each gdaltool display the command to be run at the bottom.
It would be good if it was possible to ... Alister Hood
03:02 AM Bug report #1380: No Data values are counted as values in the histogram: Nodata values are also counted when using the "load min/max values from band" feature on the "Style" tab.
This w... Alister Hood
02:40 AM Feature request #4348 (Closed): Add features like "creation options" and "no data" for all gdaltools: The dialogues for some of the raster tools (e.g. translate) have options for important things like specifying a nodat... Alister Hood

2011-10-04

11:19 PM Revision 9ec80235 (qgis): Dont use gdal c++ api. Also gdal drivers now unloaded without restart: Tim Sutton
11:16 PM Bug report #4347 (Closed): raster and vector rendering mismatched by 1 pixel at some zoom levels: I'm not 100% sure if this counts as a bug:
Depending on the zoom level, a raster image and a vector with the same ex... Alister Hood
10:40 PM Feature request #4346 (Closed): startup tip suggestion: It might be good to have a startup tip explaining about VRT files.
I can't think of a good concise text at the moment... Alister Hood
10:08 PM Bug report #2491: Raster transparency doesn't handle alpha channel: I remember some conjecture on the mailing list that this is simply a new feature which hasn't been implemented yet.
... Alister Hood
09:46 PM Feature request #4160: Enhancements to multiband raster styling to make it more user friendly / c...: Something else, although it would probably be covered by your gui redesign:
Everything in the colormap tab is grayed ... Alister Hood
03:39 PM Revision 52a30097 (qgis): Merge remote branch 'pb/master': Conflicts:
src/plugins/roadgraph/linevectorlayerdirector.cpp Sergey Yakushevs

2011-10-03

11:08 PM Revision 3f70d32e (qgis): Horizontal scroll bar in browser dock (#4274): Martin Dobias
10:51 PM Revision 6999c897 (qgis): Do not show file extension in browser (#4309): Martin Dobias
10:48 PM Revision 3350c9c0 (qgis): Do not include |layerid=X if the layer is not a collection (#4309): Martin Dobias
09:27 PM Revision 56771039 (qgis): Ensure that we have a valid line in line decoration (#4241): Martin Dobias
06:48 PM Revision 3c671041 (qgis): yet another take on matching proj4string in our database: Jürgen Fischer
06:23 PM Bug report #4302: Can't use 'Geostationary Satellite View' projection: So far as I can tell there isn't anything in QGIS to fix. Steven Mizuno
08:07 AM Bug report #4302: Can't use 'Geostationary Satellite View' projection: Hi, so this means that is not a QGIS issue, right?
Steven Mizuno wrote:
> More information -
>
> I looked more clos... Giovanni Manghi
07:42 AM Bug report #4302: Can't use 'Geostationary Satellite View' projection: More information -
I looked more closely at how the MGRS 6x8 degree data was displayed and found that there were mis... Steven Mizuno
02:59 PM Revision 76f9c4d5 (qgis): Fix for wrong symbol scaling if symbol size is defined in map units and...: Marco Hugentobler
02:09 PM Feature request #4274 (Closed): Data browser, horizontal scrollbar: Added in commit:3f70d32 Martin Dobias
02:09 PM Feature request #4274 (Closed): Data browser, horizontal scrollbar: Added in commit:3f70d32 Martin Dobias
01:56 PM Bug report #4309 (Closed): File browser: loaded layers do not behave the same way as those loaded...: Should be fixed in commit:3350c9c and commit:6999c89 - at least with shapefiles. Some files that OGR loads actually m... Martin Dobias
01:56 PM Bug report #4309 (Closed): File browser: loaded layers do not behave the same way as those loaded...: Should be fixed in commit:3350c9c and commit:6999c89 - at least with shapefiles. Some files that OGR loads actually m... Martin Dobias
12:30 PM Bug report #4241 (Closed): QGIS crash when zooming vector layer Postgresql with new line style: Should be fixed in commit:5677103. Martin Dobias
12:30 PM Bug report #4241 (Closed): QGIS crash when zooming vector layer Postgresql with new line style: Should be fixed in commit:5677103. Martin Dobias
08:40 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: It took me a while to find this reference. No, it's not a plugin: see these two bug and feature reports.
Bug #41... Thaddeus -
08:06 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: Thaddeus - wrote:
> I really need the feature that lets me identify the Band I'm plotting (1.6) and that was not inc... Giovanni Manghi
08:03 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 installed on the same ... Thaddeus -
04:12 AM Feature request #4332: Add an option "set project CRS from first loaded layer": > The #4333 "issue" is not an issue at all: the CRSs (coordinate reference system, the acronym makes perfectly sense,... Jonathan Moules
03:56 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer": Borys Jurgiel wrote:
> See also #2093. Probably we can close this one as a duplicate now.
agree, duplicate of #2093.... Giovanni Manghi
03:56 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer": Borys Jurgiel wrote:
> See also #2093. Probably we can close this one as a duplicate now.
agree, duplicate of #2093.... Giovanni Manghi
03:53 AM Feature request #4332: Add an option "set project CRS from first loaded layer": See also #2093. Probably we can close this one as a duplicate now. Borys Jurgiel
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer": > It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection... Giovanni Manghi
04:04 AM Bug report #4345 (Closed): Pie-chart diagrams are irregularly displaced (?) in map composition ou...: When extracting a map composition using pie-chart diagrams (in all types of output, image, PDF or SVG) the 'pies' are... Nikos Tzelepis
03:52 AM Feature request #2093: Provide configuration options for new project (map) CRS and OTFR: See also #4333 - also add a "set CRS from first laded layer" option. It could be either another radio button in the g... Borys Jurgiel
03:36 AM Bug report #4216: error editing dbf over ssh / sftp: I don't have problem editing the file locally
I'm not sure how i mount the filesystem. I use the "connect to server"... Francisco Puga
02:39 AM Bug report #4344 (Closed): Debian packaging is broken: already fixed in commit:cb3ba889 Jürgen Fischer
02:39 AM Bug report #4344 (Closed): Debian packaging is broken: already fixed in commit:cb3ba889 Jürgen Fischer
02:26 AM Bug report #4344 (Closed): Debian packaging is broken: When I try to build QGis debian packages with debug enabled, dh_shlibdeps fails with message:... jekhor -
02:23 AM Feature request #4330: Spatial Indexing of Shapefiles on first load: Jonathan Moules wrote:
> Ah, it depends what you mean. I actually encountered this by loading a shapefile with ~3mill... Giovanni Manghi
02:05 AM Feature request #4330: Spatial Indexing of Shapefiles on first load: Ah, it depends what you mean. I actually encountered this by loading a shapefile with ~3million line features so I ca... Jonathan Moules

2011-10-02

01:56 AM Feature request #4332: Add an option "set project CRS from first loaded layer": It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection ti... Jonathan Moules
05:29 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer": QGIS is more flexible: you can set the behavior for new projects CRSs and layers without a explicit CRS in the QGIS g... Giovanni Manghi
05:29 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer": QGIS is more flexible: you can set the behavior for new projects CRSs and layers without a explicit CRS in the QGIS g... Giovanni Manghi
01:41 AM Bug report #4343 (Closed): Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10: Hello,
I have created shapefile with UTF-8 attribute values. In QuantumGIS 1.7.1 they are displayed correctly, but i... vvj -
07:08 PM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: Yeah, I just tried another PC with XP and Ubuntu and could not replicate either: I'm going to try angain tomorrow on ... Thaddeus -
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...: The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th... Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...: The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th... Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...: The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th... Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...: The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th... Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...: The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th... Giovanni Manghi
11:57 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: see also #4299 Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label: I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
11:53 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...: see also #4296 Giovanni Manghi
11:46 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...: Seems to me is not listed as a plugin. Giovanni Manghi
11:46 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...: Seems to me is not listed as a plugin. Giovanni Manghi
11:53 AM Bug report #4296 (Closed): Loading files through Browser does not load style: duplicate of #4309 Giovanni Manghi
11:53 AM Bug report #4296 (Closed): Loading files through Browser does not load style: duplicate of #4309 Giovanni Manghi
11:48 AM Revision cb3ba889 (qgis): debian packaging update: Jürgen Fischer
11:45 AM Revision b379671a (qgis): fix windows build: Jürgen Fischer
11:12 AM Feature request #4330: Spatial Indexing of Shapefiles on first load: I'm not sure this issue (of slow vector loading) goes away by creating spatial indexes, from my tests it doesn't.
Th... Giovanni Manghi
10:12 AM Revision b8305a7b (qgis): fix network-analysis API and export function in RoadGraph plugin (fix #...: Alexander Bruy
10:07 AM Revision a0e39e60 (qgis): include QgsGraphArc description in Doxygen output (fix #4342): Alexander Bruy
06:22 AM Bug report #4300: Zoom to Layer Extent does not work after extent of underlying PostGIS view changes: I can confirm the issue on QGIS trunk and PostgreSQL 8.4/PostGIS 1.5 installed on Linux. Giovanni Manghi
05:53 AM Bug report #4238: Geoserver WFS-T throws error when using QGIS Cut Spatial Objects tool: The error message comes from Geoserver, not QGIS, as it is clearly a JAVA error message.
In any case if you can't pr... Giovanni Manghi
05:49 AM Feature request #4327: UNC SVG paths instead of browse for folder: Jürgen Fischer wrote:
> not reproducable here - the browse dialog also includes "Network Neighbourhood", so you can b... Giovanni Manghi
05:47 AM Bug report #4221: Cannot add values to new column in attribute table in same session: Anita Graser wrote:
> I cannot reproduce this problem using 1.7.0 on Win7.
I cannot replicate either on Linux and QG... Giovanni Manghi
05:40 AM Bug report #3667: When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0 QGIS crashes: Jürgen Fischer wrote:
> doesn't happen in trunk. Can you check again please?
I confirm it doesn't crash with QGIS t... Giovanni Manghi
05:25 AM Bug report #2081: Old Symbology: different rotation of symbol and label: are we sure we want to keep open tickets on old symbology and old labelling? Both will be removed in QGIS 2.x, AFAIK Giovanni Manghi

2011-10-01

01:21 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work: Thanks, applied in commit:b8305a7 Alexander Bruy
01:21 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work: Thanks, applied in commit:b8305a7 Alexander Bruy
12:00 PM Bug report #4341: Road Graph plugin. Button 'expot' not work: -2) comment fix-
Please delete it from path. Sergey Yakushev
11:23 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work: 1) Button 'export' not work
2) comment fix
3) network-analysis API-fix: use only inVertex() outVertex() functions Sergey Yakushev
01:21 AM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class: Thanks, applied in commit:a0e39e6 Alexander Bruy
01:21 AM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class: Thanks, applied in commit:a0e39e6 Alexander Bruy
01:39 PM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class: Sergey Yakushev
01:26 PM Bug report #4009 (Closed): wrong CRS definition: closing for the lack of feedback. Jürgen Fischer
01:26 PM Bug report #4009 (Closed): wrong CRS definition: closing for the lack of feedback. Jürgen Fischer
01:26 PM Bug report #4009 (Closed): wrong CRS definition: closing for the lack of feedback. Jürgen Fischer
05:45 AM Feature request #4339 (Closed): Add data defined color to new symbology: You are right! Closing this as duplicate. Anita Graser
05:45 AM Feature request #4339 (Closed): Add data defined color to new symbology: You are right! Closing this as duplicate. Anita Graser
02:40 AM Feature request #4339: Add data defined color to new symbology: duplicate of #3129 ? Giovanni Manghi
05:38 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: Thaddeus - wrote:
> Zoom in and Zoom out work OK too.
cannot replicate here on both windows (seven) and linux and qg... Giovanni Manghi
02:33 AM Bug report #4305: Query builder: added ' ' around numeric fields (wrong): Jürgen Fischer wrote:
> not reproducable here - comparing numeric fields to strings containing numbers works fine wit... Giovanni Manghi
02:22 AM Bug report #3694 (Closed): WMS quality worse on QGIS server compared to QGIS desktop: Giovanni Manghi
02:03 AM Bug report #3694: WMS quality worse on QGIS server compared to QGIS desktop: I think this was fixed meanwhile. I don't see the problem anymore.
Andreas Andreas Neumann

2011-09-30

01:18 AM Revision ef9e214c (qgis): fix #4282: Jürgen Fischer
09:52 PM Revision a0be3b94 (qgis): fix warnings: Jürgen Fischer
07:19 PM Revision e1393488 (qgis): fix minor typos + scripts/chkspelling.sh run.: Alister Hood
07:01 PM Revision 6539ce96 (qgis): fix typo: Alexander Bruy
03:57 PM Revision e55887f6 (qgis): translate comments in English (fix for #4338): Alexander Bruy
03:23 PM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.: Zoom in and Zoom out work OK too. Thaddeus -
03:22 PM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.: QGIS instantly disappears from screen when doing a "Zoom Full" or "Zoom to layer extent" on an a single SRT30 file an... Thaddeus -
03:01 PM Bug report #4305: Query builder: added ' ' around numeric fields (wrong): I get the same problem. Osgeo4w dev James Stott
12:59 PM Bug report #4305 (Feedback): Query builder: added ' ' around numeric fields (wrong): not reproducable here - comparing numeric fields to strings containing numbers works fine with postgres and shapes. Jürgen Fischer
02:47 PM Bug report #3667 (Feedback): When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0...: Jürgen Fischer
02:45 PM Bug report #3694 (Feedback): WMS quality worse on QGIS server compared to QGIS desktop: Jürgen Fischer
02:30 PM Bug report #4216 (Feedback): error editing dbf over ssh / sftp: Does that also happen if you edit the file locally? What are you using to mount the filesystem? Jürgen Fischer
02:28 PM Bug report #4221 (Feedback): Cannot add values to new column in attribute table in same session: Jürgen Fischer
05:03 AM Bug report #4221: Cannot add values to new column in attribute table in same session: I cannot reproduce this problem using 1.7.0 on Win7. Anita Graser
02:19 PM Bug report #4282 (Closed): Wrong map zooming when using the "Attribute Table" zoom tool.: fixed in commit:ef9e214 Jürgen Fischer
02:19 PM Bug report #4282 (Closed): Wrong map zooming when using the "Attribute Table" zoom tool.: fixed in commit:ef9e214 Jürgen Fischer
01:55 PM Revision a02b4802 (qgis): fix #4331: Jürgen Fischer
01:13 PM Feature request #4327 (Feedback): UNC SVG paths instead of browse for folder: not reproducable here - the browse dialog also includes "Network Neighbourhood", so you can browse for network resour... Jürgen Fischer
12:25 PM Revision 8aa2f501 (qgis): german translation update: Jürgen Fischer
12:13 PM Revision b53e6229 (qgis): indentation update - please use prepare-commit.sh: Jürgen Fischer
10:21 AM Bug report #4298 (Closed): Patch: minor typos in the code: applied in commit:e139348
also ran scripts/chkspelling.sh to catch some more. Jürgen Fischer
10:21 AM Bug report #4298 (Closed): Patch: minor typos in the code: applied in commit:e139348
also ran scripts/chkspelling.sh to catch some more. Jürgen Fischer
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection: Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje... Giovanni Manghi
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection: Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje... Giovanni Manghi
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection: Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje... Giovanni Manghi
09:34 AM Bug report #4333: EPSG:27700 is interpreted as custom projection: Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje... Giovanni Manghi
09:31 AM Bug report #4333: EPSG:27700 is interpreted as custom projection: I'm not going to pretend to understand that response, but:
"In your case the shape reprojects fine" - is wrong.
When ... Jonathan Moules
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection: The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection: The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection: The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
09:34 AM Revision ee192945 (qgis): Merge pull request #49 from stopa85/network-analysis: Network analysis and road-graph-plugin Marco Hugentobler
07:06 AM Bug report #4338 (Closed): russian comment in src/analysis/network/qgsgraph.h: Alexander Bruy
07:05 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h: fixed in commit:e55887f62b97a3dccbae0995596a6b3709664dca Alexander Bruy
04:40 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h: sorry Sergey Yakushev
04:40 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h: sorry Sergey Yakushev
06:14 AM Feature request #4339 (Closed): Add data defined color to new symbology: Similar to data defined font color in new labeling, it would be nice to be able to use an attribute to color features... Anita Graser
05:25 AM Feature request #1659: add a 'reload button' to the QGIS table: I guess there should be a "Reload Layer" (not just the attributes but also features and layer extent). Anita Graser
05:25 AM Feature request #1659: add a 'reload button' to the QGIS table: I guess there should be a "Reload Layer" (not just the attributes but also features and layer extent). Anita Graser
05:19 AM Feature request #47 (Closed): raster legend in map composer: Anita Graser
05:19 AM Feature request #191 (Closed): Legend improvements - further to #117: Anita Graser
04:57 AM Bug report #4239 (Closed): Chopped-off labels (consider for New Generation Labeling): Anita Graser
04:56 AM Bug report #4331 (Closed): Classification dialog issues: fixed in commit:a02b4802 Jürgen Fischer
04:56 AM Bug report #4331 (Closed): Classification dialog issues: fixed in commit:a02b4802 Jürgen Fischer
04:56 AM Bug report #4331 (Closed): Classification dialog issues: fixed in commit:a02b4802 Jürgen Fischer
04:52 AM Feature request #4217: Allow up to 5 decimal places for Width/Size Scale Field: Another (more important) reason to solve this (from bug #3825 which has been closed as duplicate):
In new symbology,... Mayeul Kauffmann
04:28 AM Bug report #3825 (Closed): Two decimal places for symbology in map unit is not suited for lat-lon...: duplicate of #4217 Anita Graser
04:28 AM Bug report #3825 (Closed): Two decimal places for symbology in map unit is not suited for lat-lon...: duplicate of #4217 Anita Graser

2011-09-29

01:12 AM Bug report #4338 (Closed): russian comment in src/analysis/network/qgsgraph.h: Please comment in English. Jürgen Fischer
01:08 AM Revision a2713fd0 (qgis): Fix from 49e4e998c6 to ensure that all postgis connection parameters ar...: Jeremy Palmer

« Previous

Also available in: Atom

QGIS » QGIS Application

Activity

Activity

2011-10-29

2011-10-28

2011-10-27

2011-10-26

2011-10-25

2011-10-24

2011-10-23

2011-10-22

2011-10-21

2011-10-20

2011-10-19

2011-10-18

2011-10-17

2011-10-16

2011-10-15

2011-10-14

2011-10-13

2011-10-12

2011-10-11

2011-10-10

2011-10-09

2011-10-08

2011-10-07

2011-10-06

2011-10-05

2011-10-04

2011-10-03

2011-10-02

2011-10-01

2011-09-30

2011-09-29