Activity
From 2013-11-02 to 2013-12-01
2013-12-01
-
11:09 PM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
- Fixed in changeset commit:"f21562c86f1cdbf8181176904e382f26aafb1da9".
-
05:29 PM Feature request #9094: Del-key should delete feature
- Hi, I have tried to bring together all the comments and I have updated the pull request (https://github.com/ahuarte47...
-
- Nathan Woodrow wrote:
> Well I think you only need to catch it in node tool, everything else just ignores it.
Hi Nat... -
04:04 PM Feature request #9094: Del-key should delete feature
- Well I think you only need to catch it in node tool, everything else just ignores it.
-
- Alvaro Huarte wrote:
> Nathan Woodrow wrote:
> > Alvaro Huarte wrote:
> > > Hi, We can not use Delete for deleting a ... -
- Nathan Woodrow wrote:
> Alvaro Huarte wrote:
> > Hi, We can not use Delete for deleting a node if we use Delete for d... -
- Alvaro Huarte wrote:
> Hi, We can not use Delete for deleting a node if we use Delete for delete selected features to... -
- Hi, We can not use Delete for deleting a node if we use Delete for delete selected features too, as Giovanni said abo...
-
05:15 PM Bug report #9149 (Closed): Overlay and Soft Light blend modes do not blend with vectors
- Upon further testing it appears that I am incorrect; blend modes seem to be working as intended. I will reopen if I f...
-
- It appears I am not used to Redmine's formatting. Could someone with the appropriate privileges please correct it for...
-
- h1. Expected behavior
When overlaying a raster on top of a vector layer, the *Overlay* and *Soft Light* blend modes s... -
04:34 PM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Found a work-around: if you use a varchar to store the LabelX and LabelY then QGIS behaves as expected.
-
- Steps to reproduce issue:
# Set up a layer in SQL Server with columns for LabelX and LabelY as float with NULL as de...
2013-11-30
-
12:58 PM Bug report #9145: Range Edit Widget not Selectable for Spatialite Layers.
- There is some other odd behavior I found when exploring this a bit more:
1. DB Manager recognizes the integer field ... -
- Unable to select the Range edit widget for spatialite layers. I've tried with int, small int, and real datatypes and ...
-
11:53 AM Bug report #9143: Label Expression Dump program
- Just tested qgis master 64bit installed with osgeo4w. No issues here. Maybe a plugin is the cause? can you please tr...
-
07:23 AM Bug report #9143: Label Expression Dump program
- Data Attached
Regards
Lene Fischer -
10:56 AM Feature request #9144 (Closed): add iface global to script namespace
- Also it would be good toimport qgis.core by default
-
10:38 AM Bug report #9139: Relations do not work on MSSQL layers
- Hi Matthias,
Thank you for your quick reply.
Please find bellow the capture.
[6188] ..\\..\\..\\..\\..\\src\\core\... -
05:02 AM Bug report #9101: Raster artefact in composer pdf export
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
-
- Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and...
2013-11-29
-
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux... -
- Using weekly from 25.november.
Trying to make a label with expression - the program is dumped (close down)
25 studen... -
06:45 AM Bug report #9142 (Closed): "format_number" function error in label expression
- Function "format_number" in expression:
format_number(($area / 10000), 2) ||' '|| "gat"
generates bad labels. I see... -
06:35 AM Bug report #9141 (Closed): processing script editor window does not have close button on linux
- see subject: on linux the script editor does not have a close icon with me.
only way to close the editor window is a... -
06:13 AM Bug report #9139: Relations do not work on MSSQL layers
- Can you open a form with embedded table and check the output (on a terminal. I think on windows you will have to use ...
-
- The foreign key/primary key columns have integer type.
Parent table: postgis vector layer from (id serial PKEY, ...... -
-
- What type do the foreign key / primary key columns have?
-
- I have tested relations (http://blog.vitu.ch/10112013-1201/qgis-relations) with postgis, sqlite, shapefiles and MSSQL...
-
03:36 AM Feature request #9140 (Open): Separating datasource, layer and style
- Hi, currently layer represents a mix between a layer style and a datasource. In my work on doing maps for geostatisti...
-
- I have no issue using Delete for deleting a node too. When you have the node tool active and a node selected then it...
-
- I do not agree with the backspace as use for removing a node. Is there a (technical) reason to make it different? Wha...
2013-11-28
-
- Customization only works for objects with objectName. objectName is automatically set by Qt for objects created in de...
-
12:58 AM Bug report #9138 (In Progress): QgsGeometry.convertToMultiType() fails
-
- https://github.com/qgis/QGIS/pull/1014
-
01:32 PM Bug report #9138 (Closed): QgsGeometry.convertToMultiType() fails
- I have a strange behavior with the QgsGeometry.convertToMultiType()
method here: it looks like the method is always f... -
- Pull request updated:
* Delete selected features in map canvas: DEL key without ask for confirmation.
* Delete selec... -
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- Nathan Woodrow wrote:
> Backspace already deletes a node when drawing a feature. I think backspace should delete a n... -
- Backspace already deletes a node when drawing a feature. I think backspace should delete a node too.
-
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need... -
- I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need to confirm, and in the ...
-
- Nathan Woodrow wrote:
> No not another option please. There is no need in this case. Like I, and others, have said u... -
- Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'...
-
- Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'...
-
-
04:14 AM Bug report #9137: Typo in text message in the code ?
- Huh? "provider plugins" is the plural of "provider plugin".
-
03:34 AM Bug report #9137 (Closed): Typo in text message in the code ?
- Hi,
in the source file https://github.com/qgis/QGIS/blob/master/src/app/qgisapp.cpp, line 627
The comment is "load ... -
- Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp... -
- Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp...
2013-11-27
-
12:40 AM Feature request #7878: Windows 8 Location Provider GPS Support
- Sorry no luck. Even on other ports it is not working though some other software works. I think it is also connected t...
-
- Nyall Dawson wrote:
> Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps th... -
02:38 PM Bug report #9135: PostGIS - materialized views only show if "also list tables with no geometry" i...
- Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps this bug is only trigger...
-
- Not reproducable here using PostgreSQL 9.3 with PostGIS 2.1. Here materialized views only disappear when 'Only look ...
-
- PostGIS materialized views are not shown in the "Add PostGIS table" dialog UNLESS "also list tables with no geometry"...
-
02:36 PM Bug report #7905: unset keyboard shortcuts are not remembered
- Confirmed. Unset shortcuts are restored to default values.
-
- No not another option please. There is no need in this case. Like I, and others, have said undo and redo are the rea...
-
- We can propose a configurable option:
* Delete selected features in map canvas: DEL key (+).
* Delete selected featu... -
- I hate confirmation dialogs so a +1 for me to not have one. The undo is enough if something goes wrong.
-
- How about sticking to the confirmation with DEL, and add a shortcut SHIFT + DEL for no-confirmation delete? That's wh...
-
- very much agree on the proposal above.
at the moment you are being asked for removal of a feature (while you can eas... -
- Hi, we can propose to user/dev ML several shortcut changes similar to Arcmap behavior:
Arcmap 9.3:
* Delete selecte... -
02:13 PM Bug report #9060: Area is wrong in QGIS master (again)
- Sorry Giovanni, but the bug surfaced again in nightly build commit:30900e9!! It has exactly the same symptoms it had ...
-
- The browser pane currently ignores any Postgis materialized views. These should be shown in the browser alongside oth...
-
09:41 AM Bug report #9134 (Closed): customization menu doesn't work
- It is not possible to customize single entries of the menu bar. For example trying to remove "geoprocessing" and "geo...
-
- Jonathan Moules wrote:
> Excellent response time. Why can't ESRI be like that? ;-) Thanks.
No "E$RI":http://richardb... -
- Jonathan Moules wrote:
> Why can't ESRI be like that?
Essential Service Request Ignored
this is how they are known... -
06:41 AM Bug report #9131: WMS/WMTS dialog - loses text after /
- Excellent response time. Why can't ESRI be like that? ;-) Thanks.
-
- Fixed in changeset commit:"30900e9b8960b1dbe13d08e903d17f77b3ef7bca".
-
- 1) Open WMS/WMTS dialog
2) Enter: "wmts - wppgeog3/geoserver" as the name; any url
When it saves it will save the na... -
- Yes, but you can't expect users to do that. Most don't understand OGC service URL's. If the servers were actually com...
-
- Use @http://wppgeog3/geoserver/gwc/service/wmts?SERVICE=WMTS@, if you want WMTS.
-
- Use @http://wppgeog3/geoserver/gwc/service/wmts?SERVICE=WMTS@, if you want WMTS.
-
- In fact, looking at the spec further, it seems the server should be returning a 400 error to that request. (InvalidPa...
-
- I've set my WMTS to use:
http://wppgeog3/geoserver/gwc/service/wmts
When I click "connect" it makes the following r... -
- maybe helpful?
http://stackoverflow.com/questions/81627/how-can-i-hide-delete-the-help-button-on-the-title-bar-of-a-... -
- to help non windows users to understand the 'problem'.
see screenshot: as you can see there is both a help-button on... -
- When doing a join and then saving the resulting layer/table with the "save as..." option, the joined column names are...
-
- Alternative for moving to core:
We could add the possibility to expose a python API from C++ plugins as well. I could...
2013-11-26
-
12:29 AM Bug report #9128 (Closed): wrong perimeter value in the identify feature tool
- trying to calculate area and perimeter from a simple shapefile with CRS WGS84UTM32 following these steps:
1) set up t... -
- More opinions:
https://github.com/ahuarte47/QGIS/commit/9f1395ea04cc0498535ac28d6779609be752c842#commitcomment-4713567 -
- Giovanni Manghi wrote:
> > I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e.... -
> But please call me wrong :)
you can have a feature selected, as well as a node, at the same time, even of differe...-
- I'm not that deep into QGIS, but aren't both with an internal state?
* If feature is selected, delete it
* If a node ... -
> I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e.g. Ctrl+Del).
> But it c...-
- Giovanni Manghi wrote:
> are we sure that this will not clash with the "del" action used by the node tool to delete s... -
- are we sure that this will not clash with the "del" action used by the node tool to delete selected nodes? :)
-
- Postgres 9.3 added support for materialized views. These are currently ignored by dbmanager and not shown in the tree...
-
- It's actually not quite that simple - the maximum value is not known until the entire heatmap is generated, it can't ...
-
-
- Problem finally solved in QGIS nightly build commit:55f8606!
Cheers -
- Currently tools that are related to the layer widget are only within the context menu of layers. This is bad, as
* th... -
- That's fixed it.
And wow, this is awesome. Compare it to the ArcGIS WMTS implementation which is utterly awful and to... -
- 1) Installed "last" weeks weekly build (in my case QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe )
2) Uninstall manually fr... -
- Jeremy Palmer wrote:
> I've just seen this pull request. Dumb question, but why would you implement the user defined ... -
02:11 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- I've just seen this pull request. Dumb question, but why would you implement the user defined
simplification setting... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr... -
- Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr...
2013-11-25
-
11:20 PM Feature request #9124 (Rejected): Heatmap in percentage
- Heatmaps would be far more convenient (easier to interpret in many contexts) if they could (optionally) be expressed ...
-
11:01 PM Bug report #9097: Could't run the python script, when a multi-byte letter is included in file name
- The patch should be:...
-
05:33 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
- Support for such files added as http://trac.osgeo.org/gdal/ticket/5307
-
- Support for such files added as http://trac.osgeo.org/gdal/ticket/5307
-
04:37 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
- Qgis and ogr doesn't load the files DXF of italian cadastral system, it give a error as file malformed. (error is: ...
-
- I propose this pull request:
https://github.com/qgis/QGIS/pull/1010
-
01:36 PM Bug report #8920: DB Manager Fails to Load Raster | QGIS 2.0.1
- This bug is present in 2.1.0-Master (Debian Jessie amd64, Nightly build), and postgreSQL 9.3
Patch suggested by Max c... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89".
Hi Jürgen, I seen your... -
- Thank you both very much for fixing :)
-
- Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89".
-
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards -
- Hi Jonathan, looking into the fix of jurgen, it seems there is was a missing default style.
So I thought to check th... -
- Thanks! I guess that'll be in tonight's weekly build?
-
- Fixed in changeset commit:"c321f597fd814f963cc55ec3edfbe708fcf37a45".
-
- You can test with - http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?REQUEST=GetCapabilities
-
- Would this be in the build weekly QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe - 18-Nov-2013 20:22 - number e882e47 from - ...
-
- Thank you for the quick fix Marco.
It seems this can be closed.
Out of curiosity, is there a reason to have it open ... -
06:01 AM Bug report #9119: srs.db not closed (with OTF reprojection)
- it works :)
19 opened at the open of qgis
37 after opened my project... after a while down to 25
zoom... remain 25 a... -
05:32 AM Bug report #9119 (Feedback): srs.db not closed (with OTF reprojection)
- There was a missing delete / db close. However, it does not explain why the number of open db grows with every zoom.
... -
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day...
-
- no... it's not my fault!
on fly repropjection open 12 /tmp/srs.db EVERY zoom or canvas redraw!
I don't know if it's... -
- hmmm... seems is related to my opened db by my new plugin
it's full of: /tmp/srs.db
generating 20 more every zoom!... -
- Can you run the following command when this happens next time, replacing [qgis-pid] with the actual pid
@ls -l /proc... -
- Hi,
I have this erros during short time setting style o a spatialite layer. I don't know if this happend with other ... -
03:40 AM Bug report #9110: Empty SAGA help
- Yes Alexander, now i see one thing.
I use the #8259 to get html help and put in my folder of description inside of s... -
- https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-... -
- https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-...
2013-11-24
-
12:27 AM Bug report #9110: Empty SAGA help
- If I'm not wrong, we never have complete documentation. Also we decided to move all documentation outside Processing,...
-
- Fixed in changeset commit:"c1d2798f47b7788f8b81eaf4b9f8707487f5919f".
-
- This issue seems to be fixed.
-
11:23 AM Bug report #9118: Crash when using arrow key
- Error message:
_Warning: QSpiAccessible::accessibleEvent not handled: "8008" obj: QSidebar(0x6755c80, name = "sid... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho... -
- When I create a map and like to save it as an image I can type in a file name and get suggestions from already existi...
-
- While QgsRenderChecker allows for anomaly images, there's no similar feature in QgsCompositionChecker. Currently ther...
-
- Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested... -
- Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested...
2013-11-23
-
01:23 PM Bug report #9116 (Closed): Compile error: cannot find -lqgis_app
- The QGIS compile for qgis-server use
give an error.
I'm using the today master trunk version
[ 99%] Built target qgi... -
- One thing do you have the folder description inside of saga folder with html help?
Another thing that i can do is se... -
02:52 AM Bug report #9110: Empty SAGA help
- Hum, on Linux "Reload" doesn't work with the Help of Pattern Analysis
-
- Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel... -
- Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel... -
03:59 AM Bug report #9114 (Closed): Ellipse renderer always draws black ellispes in combination with color...
- In other renderers, it is possible to us color functions such as color_rgb( 100,255,255) to change the fill and outli...
2013-11-22
-
- Nyall Dawson wrote:
> Alvaro Huarte wrote:
>
> > Hi Nyall, I did not know this discussion!, I have involved in QGIS ... -
- Alvaro Huarte wrote:
> Hi Nyall, I did not know this discussion!, I have involved in QGIS later. Coincidences of lif... -
- Nyall Dawson wrote:
> Alvaro - these improvements look fantastic! Your hard work is much appreciated!
>
> One relate... -
- Basically yes. But IMHO we need to focus esp. beginners to GIS that just want to work with data. The consequence woul...
-
11:06 AM Feature request #9098: Offer a global OSM TMS as default map services
- Have you tried the openlayers plugin? Are you looking for something similar?
-
- I confirm the help is incomplete. Another thing. After the fix if the help stay blank do right click and reload this ...
-
- I applied your fix but it didn't work. It may be possible that I tested algorithms with no help. Which ones did you t...
-
- There's also no help on Linux (I thought there wasn't any).
-
- There's also no help on Linux (I thought there wasn't any).
-
-
- I agree this would be an useful feature, and also in combination with a WYSIWYG editor would make a powerful combo if...
-
- May I suggest also to add the possibility to choose the anchor point
-
- I have been using the quick finder plugin for this, but this should be a core function of QGIS, hope this is added in...
-
- I think its more natural as user experience for you to look the alphabetical order of the first item of the list, in ...
-
- I think F5 as default is better since most users would expect that either from other software or from browser refresh...
-
- I see no issues setting it as default.
-
- I agree that you can alter the shortcut on your own, but my request is esp. on (useful) defaults.
As always it's har... -
01:55 AM Feature request #9085: Set refresh to F5 key
- Hi,
I believe that you can set it by yourself through Settings - Edit shortcuts. By the way, I just learned from you... -
- I agree, I have been using QGIS for some time and didn't know you could just configure the shortcut to do that. By de...
-
08:37 AM Bug report #9113: Print converter: Map layer is not included when saved as image
- Oh or if the map appears, it almost alway has a different zoom, so the map and the layers don´t fit together. That is...
-
- Hello!
I have following Problem (not sure if it's a bug or I just messed it up, though).
I am trying to save part of... -
- Open the layers in the attached SL db (you may want to use the attached project), then activate OTFR and try edit one...
-
> On the other hand on Linux it crashes (but may not be related).
On Linux qgis master crashes, qgis 2.0 does not ...-
06:55 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
- ok great, thanks for looking into that!
-
- Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64... -
- Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64... -
- I just reinstalled, but it's reporting the same version.
I'm using the osgeo4w-setup-x86_64.exe installer. The inst... -
- Matthias Kuhn wrote:
> There have been a couple of recent updates in this area. Could you already check if this fixes... -
05:55 AM Bug report #6476: data defined ellipse symbols on polygon centroid fill
- Works for me too now! And I could even fill the ellipse colour using a text field containing values like #54f7b8.
I'... -
02:18 AM Bug report #9088: Text Annotation Symbols size is wrong in map composer
- Hello Giovanni
I downloaded Master on 21 November.
The text annotation symbol problem is the same as that on stable v... -
- Why not to make InfoFormat selectable in the WMS server settings? As Mapserver administrator I know it is very hard t...
-
- Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g... -
- Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g... -
- closing for lack of feedback.
-
- closing for lack of feedback.
2013-11-21
-
- Nyall Dawson wrote:
> Here's some more string updates for this latest addition:
>
> "By default simplify geometries"... -
- Alvaro - these improvements look fantastic! Your hard work is much appreciated!
One related idea I was planning on i... -
- Here's some more string updates for this latest addition:
"By default simplify geometries" -> "Simplify geometries b... -
- Hi,
I release a new windows installer which contains:
* Patch #8725 of QGIS (https://github.com/qgis/QGIS/pull/980... -
- regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > > Anyone else noticed something similar?
> >
> > can you try remov... -
- Giovanni Manghi wrote:
> > Anyone else noticed something similar?
>
> can you try remove the layers (one by one) fro... -
> Anyone else noticed something similar?
can you try remove the layers (one by one) from your project and see if yo...-
- rph - wrote:
> Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layer... -
- May be related to the old Qt version shipped on windows 32 bit.
-
- There have been a couple of recent updates in this area. Could you already check if this fixes the problems?
-
- just saw your post #11 - we must have passed each other. Yeah, I'll go ahead and update - probably tomorrow
-
- ah, gotcha. I was afraid I'd done something stupid. Thanks
-
- Brian Freed wrote:
> I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs l... -
- I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs like 'Select datum tra...
-
- Brian Freed wrote:
> my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing ... -
- Brian Freed wrote:
> If you start a fresh QGIS session and just load in all the layers, does it still crash?
> (tryin... -
- If you start a fresh QGIS session and just load in all the layers, does it still crash?
(trying to figure out if it's... -
- my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing as Master, right? (ot...
-
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible.... -
- footnote:
I was back on the same site all day yesterday & this morning, and can confirm that file performance degrade... -
- Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number... -
- Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number... -
- you need to
@from PyQt4.QtCore import QFileInfo@
or just import all the important PyQt stuff
@from PyQt4.QtCore im... -
- Is this still an issue for somebody?
-
- This works with QGIS 2.0 (And there is no more data type QVariant in PyQT...) And as it seems, it's easy to work arou...
-
- This issue has been reported against a development version and not seen any updates for several months, so I assume i...
-
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab... -
- When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can... -
- When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can... -
- I find the bug. :)
In the folder .qgis2/python/plugins/processing/saga on the SagaAlgorithm.py in line 508 substitu... -
- *Win 7 64-bit / OSGeo Installer 32-bit
Plugin Processing Version: 2.0-20131120*
_QGIS version 2.0.1-Dufour QGIS code... -
- Yes i agree. My first idea was create a automatic workflow starting with vector contour lines > interpolation > NVIZ....
-
- When adding nviz in a model the following pyhton error shows.
Probably it would be better to remove nviz from the mo... -
- When i say small is simple: 1 raster (elevation) and 1 raster (color) and the algorithm NVIZ
Yes but only with the i... -
- can you share the model?
-
- Hi there,
I test a small model using NVIZ as my final algorithm. When try to use the NVIZ in model of the modeler g... -
- in qgis master when I add (example) a csv as a table, the datum transformation dialog shows (I guess it should not).
-
- It seems that if there are NULL values in the raster a mask representing those values (transparent) is written to PDF...
-
- Thanks, Matthias! Making composition a class variable solves this issue.
-
- Alex, did you try to assign the composition to a class variable instead of a local variable so it does not get garbag...
-
- I also see this issue with the standard N x T distance matrix.
The linear distance matrix seems to works ok.
The su... -
-
- Closed due to lack of feedback.
Please reopen if required and add any data/info that may have been requested. -
- Closed due to lack of feedback.
Please reopen and provide requested details if this problem is still an issue. -
- hagit Wiener wrote:
> I'm having the same problem.
> Downloaded the latest version of Qgis earlier this month. What i... -
01:22 AM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
- I'm having the same problem.
Downloaded the latest version of Qgis earlier this month. What is the OGR? -
- Closing due to lack of feedback.
Please reopen (with added details) if this still is an issue. -
- Works for me on a recent master build. Is this issue solved or am I testing the wrong thing?
2013-11-20
-
07:11 PM Bug report #9106 (Closed): There is no equivalent to setGrayBand for QgsSingleBandPseudoColorRend...
- I have been struggling with multiband rasters for some time. I wish to iterate through the multiband raster that I h...
-
04:30 PM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layers. Surprinsingl...
-
- Nyall Dawson wrote:
> Can I suggest some improvements in the strings?
>
> "Fast drawing" -> "Simplify geometry"
>
>... -
- Can I suggest some improvements in the strings?
"Fast drawing" -> "Simplify geometry"
"Note ..." -> "Note: Enabling... -
- Yeah really good. Describes perfectly the situation. =)
Regards -
- Alvaro Huarte wrote:
>
> Hi João,
> I added a warning label that appears when the user increases the simplification ... -
- regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra... -
- Alvaro Huarte wrote:
> João Gaspar wrote:
> > My feedback:
> >
> > *OS: Windows 7 64-bits
> > Processor: Intel(R) Co... -
02:14 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi Alvaro, I tested your windows package, this is huge! Many thanks...
As a GIS administrator, I would need a genera... -
-
- Hi, QGIS 2.0 introduces a new OSM tool that allows to get the corresponding area of a layer directly from OSM and sto...
-
- Fixed in changeset commit:"584aba7672e1c000a031de750713cd9a8e58ca8d".
-
- confirmed here, does not happen if the csv is imported as point layer.
-
- Using the "stops.csv" file from this zip - http://www.dft.gov.uk/NaPTAN/snapshot/NaPTANcsv.zip
1) Drag file into QGI... -
10:33 AM Feature request #7878: Windows 8 Location Provider GPS Support
- Miroslav try use higher COM port (4 or 5). Many users of Centrafuse Localizer have a problem on some navigation syste...
-
- *New description:*
N x T distance matrix is created without errors in Processing but output is wrong, see attached f... -
- Have downloaded the 2.1 weekly and "standard" is still broken, though in a slightly different way. "Linear" is also s...
-
- Alexander Bruy wrote:
> Go to "Projects" page and you will see all available trackers. If you post bug in wrong track... -
- Jonathan Moules wrote:
> b) How many trackers are there for all of the components of QGIS? How is a user supposed to ... -
- This is the Processing's bug tracker. I believe the idea is to clean the current Processing bugtracker and then merge...
-
- Alexander Bruy wrote:
> Works in master.
>
> Please, don't post Processing issues in QGIS tracker!
a) There is a "P... -
- Works in master.
Please, don't post Processing issues in QGIS tracker! -
- Works in master.
Please, don't post Processing issues in QGIS tracker! -
- Due to proxy issues I can't access the plugin installer. Sorry.
-
- Can you also test with a more recent code revision? It's available via the Plugin Installer.
-
- 1) Add the attached "points" shapefile.
2) Use the Processing toolbox Distance Matrix - configure as attached screens... -
07:13 AM Bug report #9101 (Closed): Raster artefact in composer pdf export
- When exporting composer with raster image to pdf it leaves an artefact around the edge of the image.
See attached ra... -
- If you add the CSV as table, then is editable, if you add it as a point layer then it is not. I believe that is a ogr...
-
-
- Hello everyone,
It seems the R has a package R2HTML that convert the R objects to HTML.
http://cran.r-project.org/w... -
- IMHO it should be set by default. Think on yourself from an enduser POV, how often do you alter the shortcuts of an a...
-
- it can be configured in "configure shortcuts" panel, but anyway I guess that it could be configured by default.
-
- I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th...
-
- I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th...
-
- More and more novice users join GIS even due to open data (encouraged citizens...datajournalists) and QGIS is one of ...
-
01:29 AM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
- When run the python script which multi-byte letter is contained file name from python console editor, I/O error occur...
2013-11-19
-
- HI
Previously I have used the same QGIS project for V1.8 with Atlas plugin. The maps were created well and very satis... -
04:55 PM Bug report #9095 (Closed): Shape file points not appearing in 2.0.1
- Well I accidentally found the solution to my problem. I found that there was a point in the attribute table that had ...
-
- I have a shape file that is a point layer which has been working fine and displaying fine in 1.8. When I open the lay...
-
01:56 PM Bug report #9089: Data-defined symbol color very slow in 2.0 release
- Sorry, I've found that was a Qt 4.7 bug : ...
-
- tagging as regression.
-
- tagging as regression.
-
- Hi,
Data-defined symbol color is very slow on 2.0 release cause a lot of Qt warnings appears :
@QColor::setNamedC... -
- I confirm this issue on 12.04. QGIS always launches on the second window of the workspace. The user has to open the w...
-
- Currently QGIS 2.0 shows the main window every time on a different window at startup. That causes strange effects as ...
-
- Hello
Text annotation symbols worked fine with QGIS 1.8.
Size of symbol on map canvas was the same on map composer.
T... -
- do you have any evidence if this was working the right way in qgis 1.8?
-
- do you have any evidence if this was working the right way in qgis 1.8?
-
- I am able to add text annotaion to map canvas without any problem.
Problem arises when going to map composer.
Text an... -
- João Gaspar wrote:
> Ahaha. ;)
>
> In the minimum level don't appear gaps is "clean and smooth". ;)
>
> Only appear... -
- Ahaha. ;)
In the minimum level don't appear gaps is "clean and smooth". ;)
Only appears when i increase the slider ... -
- João Gaspar wrote:
> Sorry my English sometimes tricks me. :p
>
> I don't understand what you want to say with "not ... -
- Sorry my English sometimes tricks me. :p
I don't understand what you want to say with "not appear in the scroll at l... -
- João Gaspar wrote:
> My feedback:
>
> *OS: Windows 7 64-bits
> Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz ... -
- Yes, it just works with positive values :)
-
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- > Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right? -
- Calculating mean coordinates require negative weigths per definition.
The QGIS 2.0 feature sadly doesn't check nor no... -
- Most users would expect that Del key will erase the current selected feature, if you are in edit mode. Please fullfil...
-
- Hi, even if I worked with .CSV files already in QGIS 2.0 I now somehow managed to get my instance not allowing to go ...
-
- Here is an example of what works for me both in 2.0.1 and current master:...
-
- 'msGMLOutput' is OK. I don't see anything wrong in the response.
Current master can display parsing error with possi... -
- Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,... -
- Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,... -
02:47 AM Bug report #9082 (Closed): Failure to display getfeatureinfo results from mapserver 5.6
- Tried on OpenBSD and Windows 7, with QGIS 2.0.1. (1.8.0 works fine but queries INFO_FORMAT=text/plain)
If i query a ... -
- Even worse then
-
- are you sure, it's related to Atals use case?
I have labels truncated also in static printing and main Mapcanvas.
-
- Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t... -
- Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t... -
- apparently master is not affected, but it's reproducable on 2.0.1
-
- The button needs to follow the same states as the button at the attribute table (consistency).
Enabling edit-mode c... -
- What do you suggest?
Personally, I think it would be nice if clicking on the toolbar's Field Calculator activated th... -
- The Field calculator button in toolbar is disabled when switching in editmode of a vector layer. You need to go Attri...
-
- Currently the Layer menu includes a lot of stuff, so on medium size displays as laptops the menu gets scrollbars (see...
-
- Duplicates #2798
-
- Duplicates #2798
-
- If you resize the log window (because you might want to see if there occurs something strange), QGIS will try to do a...
-
- Alexander Bruy wrote:
> Seems the only possible way to get broken attributes is using "System" encoding when saving ... -
- Currently the calculator asks the user to fill in the expected result. As this is on the very top and the user might ...
-
- Most tools use F5 key to refesh it's screen/data. It would be nice, if also QGIS would follow this standard, as this ...
-
- In #9072 I refer to some problems in UI design. As the team wished more specific suggestions, I like to discuss on ho...
-
02:31 AM Bug report #9081 (Closed): Raster calculator result is not accurate
- When using the raster calculator with this simple example:
@layer1 / 10
the results do not come out as expected. W... -
01:56 AM Bug report #9070: +towgs84 wrongly ignored when OTF reprojection is on and project CRS is WGS84 P...
- Marco, thanks, glad this was uncovered and fixed early on :)
-
- Given that master now has the global option "Max retry in case of tile request errors", can this issue be closed now?
-
- Fix has been in master for some time -- I'm not sure why this didn't auto-close.
-
- Fix has been in master for some time -- I'm not sure why this didn't auto-close.
-
- Duplicate of #4884 - a fix is in progress.
-
- Duplicate of #4884 - a fix is in progress.
-
- Paste in Place has been in master for some time now - I think it's safe to close this request.
-
- Paste in Place has been in master for some time now - I think it's safe to close this request.
2013-11-18
-
- here is what I see:
Version de QGIS 2.0.1-Dufour Révision du code ebebdf3
Compilé avec Qt 4.7.1 Utilisant Qt 4.7.1
... -
- Can you paste a image of your about QGIS dialog.
-
- Ok, didn't know that. Anyway, it seems nathan's code is not functionnal in 32 bit package. Maybe other reasons explai...
-
- regis Haubourg wrote:
> In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version.
Right, bu... -
- In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version.
-
- regis Haubourg wrote:
> Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60
What do you mean? The p... -
- Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60
-
- Yep, updated osgeo4w 64 bit today. Will check 32 bit now...
-
- Very old. Are you using the OSGeo4W of the qgis site?
-
- Hi Nathan,
I can't see $currentfeature variable in latest revision on OSGEO4W (5f5cd4c) , with Atlas enabled..
Any ... -
- Another solution is here! in qgis.bat ("qgis.bat.tmpl":https://github.com/qgis/QGIS/blob/master/ms-windows/osgeo4w/qg...
-
- This problem was fixed once in 1.9 (commit:8970a1f), but it was affected by commit:c9eb4f2 I made to fix an issue #80...
-
11:25 AM Bug report #9079 (Closed): Numeric scale error when print
- Hello,
There is an error in the numeric scale in the map composer. For example, if we print with a scale of 1:20 000... -
- Labels for items other that the current (focused) one can be truncated in the output.
I assume this means Atlas gener... -
- My feedback:
*OS: Windows 7 64-bits
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz 2.4GHz
RAM: 4.00Gb*
*QGIS ... -
- Fixed in changeset commit:"51006cea1f2959b0e659a8ee07577632dc3c2753".
2013-11-17
-
- Alvaro Huarte wrote:
> This up guys! :-)
>
> My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#commen... -
- This up guys! :-)
My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#comment:7) in GDAL-OGR library fo... -
12:29 AM Bug report #9076 (Closed): Properties of a group of composer items cannot be edited
- When creating a group of composer items, it is not possible to edit its ID with the composer UI.
That could be useful... -
- I think more work has to be done on the Processing side, to add these options to the export command.
-
- Paolo Cavallini wrote:
> From Markus Metz, GRASS mailing list:
> ===
> An alternative would be to make use of the GDA... -
- Would be great. I tried today trial of third party software (Centrafuse Localizer) with QGIS 2.0.1, which supposed to...
-
- Fixed in changeset commit:"99cee10cf96314ae911a6d8b99d6a43015a3cf83".
-
- duplicate of #9011
-
- duplicate of #9011
-
01:38 PM Bug report #9075 (Closed): PostGIS >= 2.1 fill logs with "ST_Estimated_Extent signature was depre...
- @2013-11-16 13:55:03 MST WARNING: ST_Estimated_Extent signature was deprecated in 2.1.0. Please use ST_EstimatedExte...
-
> I would suggest also remove the "-a" parameter (Calculate distances to all features within the threshold), from v....-
- Victor Olaya wrote:
> it works here (the algorithm executes), although the results are empty... One of the things thi... -
- Markus Neteler - wrote:
> Perhaps 6.4.3 will address that: http://trac.osgeo.org/grass/log/grass/branches/releasebran...
2013-11-16
-
- iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it... -
- iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it... -
12:57 PM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
- I opened again today two of the project that caused the problem and now (after a new upgrade) no problem. Apparently ...
-
- Marco,
I *think* the indian 1960 48n layer is the one being misplaced/misprojected, based on fact that if you load t... -
- Maybe a problem with the null grid parameter that is removed now. Looking into that problem on Monday.
Do know which ... -
- noone noone wrote:
> I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have ... -
- I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have also to work and crea...
-
- That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We...
-
- That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We...
-
- Antonio Locandro wrote:
> invest
that is the key word. Invest in QGIS and good thing happens. Don't invest, then yo... -
- Maybe the tone is not there, but the spirit is. At some point some time should be invested to improve UI/UX. For exam...
-
- I'm sorry if I missed the tone. Maybe this is due because I really expected more things to be done on UX on a major u...
-
- I don't really like that this ticket creates a tone that we don't care about usability. We are always happen to impr...
-
- Even if QGIS 2.0 should addressed usability corresponding to the roadmap, the current user experience seems to be bad...
-
12:38 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
- Hello All,
maybe we could put together this issue and what I suggest in #9050 and also in PR https://github.com/qgis... -
- noone noone wrote:
> If you do that please explain people what you expect them todo. Maybe ad"ing an grayed out expla... -
- Related #8893 which is about more prominent warnings for expression errors. This should be the way to go.
-
- @Nathan yes Layer -Filter
@Jürgen If you do that please explain people what you expect them todo. Maybe adding an gr... -
- That's usual SQL syntax. IMHO we should stick to that.
-
- Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table?
-
- Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table?
-
- When you define a filter and add a field it's inserted with encapsulated as "fieldname". This causes the user to thin...
-
- When I select the measure tool, specially in GCS the default option is degrees and it tells me (OTF off). What I woul...
-
- when I do a customization in qgis to a layer toolbar changes only take place after restarting, it this the desired be...
-
- Wouldn't it be practical to use Vincenty's Formula for this?
-
- In other COTS software it is kept in memory during the lifetime of the open project. Lets say I created an expression...
-
- I would find this very useful! In my area of work we need NM support, even for measuring distances and input of dista...
-
06:29 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- Yes, I did use your latest version of QGIS. The drawing sped of QGIS with the postgis dataprovider is now compareable...
-
- Bo Victor Thomsen wrote:
> Hi Alvaro -
>
> I just tried your new version of QGIS on my Postgis-based dataset (1.3 mi... -
- Hi Alvaro -
I just tried your new version of QGIS on my Postgis-based dataset (1.3 million buildings, i.e simple pol... -
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- It works fine here, tested on both linux and windows.
-
- closing for the lack of feedback.
-
- closing for the lack of feedback.
2013-11-15
-
- Issue seems to have appeared following the (cool) datum transformation commits. Steps to reproduce:
1. Create a new p... -
- The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int...
-
- The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int...
-
- this is weird, now I cannot replicate the issue anymore.
-
- Giovanni, disabling all plugins doesn't bring me much luck over here, still crashing.
-
09:49 PM Feature request #8739 (Open): World file created from Project->Save as image has wrong extension ...
- The mentioned changeset actually fixes #8793, not this one.
-
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > Hi Alvaro
> >
> > with the new installer QGIS crashes when startin... -
- Giovanni Manghi wrote:
> Hi Alvaro
>
> with the new installer QGIS crashes when starting.
>
> Cheers!
>
>
> Alvar... -
- Hi Alvaro
with the new installer QGIS crashes when starting.
Cheers!
Alvaro Huarte wrote:
> Giovanni Manghi wrote... -
03:36 PM Bug report #9069 (Closed): Add PostGIS Table(s) Set Filter non-functional
- Applies to v2.x.x including most recent weekly build, worked previously in v1.8+
When attempting to filter data whil... -
- See attached project and files. See the two PNG images included. One shows how the area is predicted in the calculati...
-
- I just checked and could not reproduce (yet).
OTF turned on:
With project CRS set to 4326 I get 2523339 in the ident... -
- this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit... -
- this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit... -
- fixed in commit:836e1a8
-
- fixed in commit:836e1a8
-
- probably related or duplicate of #8401
-
- This wmts service:
http://geodata.nationaalgeoregister.nl/tiles/service/wmts/brtachtergrondkaart
when loading the l... -
- Jürgen Fischer wrote:
> fixed in commit:836e1a8
Um, might actually be something different. That fixes the problems ... -
- fixed in commit:836e1a8
-
- fixed in commit:836e1a8
-
- #9066 has a public url to test
-
08:09 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
- Found the same problem (QGIS 2.1 on WinXP 64): WMTS provided by default Mapcache 'demo' page works on QGIS 1.8 and 2....
-
- This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too... -
- This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too... -
- When importing a shape in Postgis by DBManager, the names of fields are switched to lower case.
It would be better l... -
- iacopo zetti wrote:
> I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian whee... -
- Fixed in changeset commit:"c0b8e9abdf17c16a18235983688eee6104ce744e".
-
- Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers! -
- Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers! -
-
- This has been fixed in commit:9259e27
-
04:43 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
- With Niedersachsen-latest it doesn't work. Could yout test it with it?
-
- I've made PR https://github.com/qgis/QGIS/pull/995/files to make scalebars more rational (under my point of view) and...
-
- it is already integrated.
you should be able to use it right away. -
03:03 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
- Yes, if it is easily integrated into the "Create new feature" dialog. All i wanted to do is to digitalize per hand so...
-
- Fixed in changeset commit:"eaf90e6a40ff49913f2920c9bfd4106e0893883b".
-
- Most probably the crash is due to the fact that the form is referring to a field that has been deleted from the shape...
2013-11-14
-
- ...
-
- Clicking with the Info tool on the layer attached, with its own style (a form has been defined there) causes a system...
-
- Martin, would you be satisifed by using unique values with editable checked?
-
- Martin, would you be satisifed by using unique values with editable checked?
-
- at the end, this would be equivalent to have _*unique values*_ with _*editable*_ checked.
So it's rather a problem o... -
- value map is for unique value, isn't it?
Here, it would just be a helper with already used values.
It could maybe be... -
- We use the value map widget for this, but a simpler way would be good.
-
- What about setting an auto completer for line edits with unique values from the layer (not from the previous entries)?
-
- Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c... -
- Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c... -
- I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian wheezy). Yes it happens al...
-
- It could be related to debug messages being printed in master (which is probably compiled with CMAKE_BUILD_TYPE=Debug...
-
07:40 AM Bug report #8506 (Reopened): In the Label Section- option Type case - Capitalize first letter don...
- This was closed prematurely, it does not work as advertised. The problem is that the function assumes the input is al...
-
05:44 AM Bug report #9063 (Closed): QGIS Plugin Builder crash since the second time it start
- This is the error:
Couldn't load plugin onetime due an error when calling its classFactory() method
Traceback (most... -
- Hi Mathieu,
this can be a plugin issue after all. I disabled all plugin but the "new memory layer" one and the crash ... -
- Marco, are you running QGIS on windows or linux?
-
01:06 AM Bug report #7927: composer fails to export with high dpi, without any message
- The GarminCustomMap plugin is facing a similar problem (e.g. #5077) when directly importing the mapCanvas, I think.
L... -
- Fixed in changeset commit:"9259e27c415b651ba49730adc098b798dc531908".
2013-11-13
-
- I tried exactly those steps and cannot replicate here (todays master). Any special options that need to be set?
-
- Export of polygons from Bremen-latest works for me without any crashes.
-
- http://download.geofabrik.de/europe/germany/bremen-latest.osm.pbf
File size: 9.1 MB
From http://download.geofabrik.de... -
- Umm... the file has 180mb... Any chance for a smaller dataset that exhibits the crash? (I have currently slow and bad...
-
- I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out...
-
- I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out...
-
- I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out...
-
- It happens while I'm using Monte Mario zone 1 and WGS 84 /UTM zone 32N, I haven't tested with other CRS.
Yes OTRF is ... -
- Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h... -
- Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h... -
- Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h... -
- Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h... -
- When I try to open the layer properties command on a raster or to use the identifier on a raster layer Qgis crashes. ...
-
- Filipe Dias wrote:
> You mean like this?
>
> http://www.inside-r.org/packages/cran/spatstat/docs/rSSI
>
> It shoul... -
- You mean like this?
http://www.inside-r.org/packages/cran/spatstat/docs/rSSI
It should be possible to add this fun... -
- Eventually by allowing choose a fixed value or a value taken from an attribute
-
> therefore, other improvement for render vector layers!
very good news!
any chance for an updated windows insta...-
- Hi,
There is a bug in QgsOgrFeatureIterator::ensureRelevantFields(), the feature cursor always fetchs all attributes... -
- Thanks!
-
- Fixed in changeset commit:"af73f30c27b5ee4860842d79eb59ad3b584e0965".
-
- Fixed in pull request:
https://github.com/qgis/QGIS/pull/994 -
- Fixed in pull request:
https://github.com/qgis/QGIS/pull/994 -
- Fixed in pull request:
https://github.com/qgis/QGIS/pull/994 -
- Fixed in pull request:
https://github.com/qgis/QGIS/pull/994 -
- There is a bug in QgsOgrFeatureIterator::ensureRelevantFields(), the feature cursor always fetchs all attributes igno...
-
- the slowness of the attribute table has been reported in another (blocking) issue.
-
- the slowness of the attribute table has been reported in another (blocking) issue.
-
- the slowness of the attribute table has been reported in another (blocking) issue.
-
- Qgis 2.1 DEV has a ressurgence of the "area calculation bug" with OTFR. For instance the NB e890e14 cannot calculate ...
-
- Hi,
In WGS84 scale in meters is different in N/S and E/W directions except on top of the equator line. Would you lik...
2013-11-12
-
- Marco Hugentobler wrote:
> Hm, does not crash here. What CRS (and what datum transform) do you assign to the newly cr... -
- Marco, here are my settings:
1. Project CRS: WGS84, OTF reprojection on
2. Newly created layer CRS: WGS84
I'm on a L... -
- Hm, does not crash here. What CRS (and what datum transform) do you assign to the newly created layer?
-
- confirmed here...
-
-
- So I was wrong in thinking this is a regression. The same issue is visible on QGIS 2.0. I just never ran into it as I...
-
- I'm not sure I can confirm this issue, at least how it was described.
What I see is that if the project is in wgs84... -
- Steps to reproduce:
1. Open the attached project
2. Open the label property of the vector layer, go in the background... -
- You can change your subscription on http://lists.osgeo.org/mailman/options/qgis-user
-
-
02:02 PM Bug report #9056: QGIS Userlist Mailinglist reject my reply
- Hi Lene,
The QGIS mailing lists reference members by their email address. If yours has changed, you probably need to... -
- Hi
Since last week my mail was changed at work. I already changed my password at the mailinglist, but I recieve a mes... -
- We'd be willing to put another $100 bounty on this one. I can't seem to find where to post one.
(I thought it used t... -
- I'd consider it a regression from 1.8, yes.
-
- can we consider this a regression then?
-
- can we consider this a regression then?
-
10:57 AM Bug report #8932: segmentation fault in GDAL when exiting, QGIS hangs
- I have cleaned up my gdal build, and the problem still remains, although more intermittently with a different error (...
-
- sounds good
-
- What about this
# Select Records
# Right click a column => context menu => field calculator
# Defaults set to select... -
- Does ESRI require ODBC drivers to access personal geodatabases? If so, how do they manage on 64bit? SCNR
-
- Antonio Locandro wrote:
> Would there be an easier fix in 64 bit than the hackish proposed solution? Especially since... -
- Would there be an easier fix in 64 bit than the hackish proposed solution? Especially since the 32 bit version on the...
-
- Antonio Locandro wrote:
> Tested again, it seems the issue is related to the size of the MDB, I have progressively
>... -
- Tested again, it seems the issue is related to the size of the MDB, I have progressively have tested the Test case wh...
-
- Bernd Vogelgesang wrote:
> Please, can someone figure out a solution for this mess ?
> ...
> I know, ...... proprieta... -
- Bernd Vogelgesang wrote:
> Even if its not a QGIS bug, i would appreciate some ideas how to get out of this trouble a... -
06:07 AM Bug report #8752 (Reopened): Unable to open ESRI personal geodatabase in 2.0
- Please, can someone figure out a solution for this mess ?
I had OSGEO4W64 installed on Win7 Pro 64bit, no chance to o... -
- The checkbox edit widget is there to produce checkboxes - hence the name. Using anything else could be considered a...
-
- The checkbox edit widget is there to produce checkboxes - hence the name. Using anything else could be considered a...
-
- -1, sorry
A checkbox as a widget that allows to choose between two states of an option is straight-forward and well-k... -
-
05:53 AM Bug report #8646 (Reopened): Python QgsRendererV2Widget not displaying on Windows 64 build
- Hi,
While I was trying to use the VectorFieldRenderer widget mentioned above, I've noticed that this issue still exi... -
- confirmed on master 866cee4 following proposed steps
-
03:05 AM Bug report #9044 (Closed): Print composer: Resizing items interactively fails
- Only happens with locked items which I think is ok. Will close this bug.
2013-11-11
-
11:03 PM Feature request #9051 (Closed): Classification uses full range of values from joined attribute table
- Joining a spatial layer with an attribute (aspatial) table in which there are more rows in the attribute table than i...
-
- Building QGIS 2 (release) gets almost to the end and then what looks like another sip related error:...
-
- closed as duplicate of #8507
-
- Steps to reproduce:
1. Create a new project (projection epsg:4326)
2. Insert the attached shapefile (adm1_states_regi... -
- Steps to reproduce:
1. Create a new project
2. Activate OTF reprojection, make sure the CRS is WGS 84 (EPSG:4326)
3. ... -
01:03 PM Bug report #8908: spatialite database updated only from opening qgis project
- As Furieri explains in the discussion on spatalite ML it is the optimistic approach (GAIA_VECTORS_LIST_OPTIMISTIC) of...
-
10:52 AM Bug report #8920: DB Manager Fails to Load Raster | QGIS 2.0.1
- The error occures not only with raster tables but with all tables, that have a foreign key constraint with a "MATCH S...
-
- Not a big deal, agreed. The main thing is that it is not clear to the user what happens if he clicks or not:
field1 ... -
- Paolo Cavallini wrote:
> That's the point: IMHO the current behaviour is that of a radio button, not of a checkbox.
>... -
- That's the point: IMHO the current behaviour is that of a radio button, not of a checkbox.
See e.g. http://en.wikiped... -
- Um, using something other than a checkbox for a checkbox doesn't make any sense to me.
-
- The checkbox widget adds a single box; it would seem more appropriate to add two radio buttons, with their respective...
-
- Update: in 64-bit Master, build 5f5cd4c, 'Toggle Editing' button is disabled for views in Spatialite version 3.0 data...
-
- Although, it seems like Spatialite version 3 databases don't have editable views either now.
(I'll update the other ... -
- I re-ran the OSGeo4W 64-bit installer for qgis-dev, and in build 5f5cd4c, Spatialite layers are working fine.
Thanks... -
- Some fixes have been applied to the spatialite provider (also affecting "whole number" type) between 2.0 and master.
... -
06:50 AM Bug report #9045 (Closed): Font marker symbol not visible in style manager after restarting QGIS
- This problem occurs when adding a the following font marker symbols to the Style Manager:
# Non-standard character fr... -
- In current master one cannot resize item (e.g. text labels) interactively.
At first it seems to work if you mouse-do... -
- Oh your still running 2.0. You will have to grab a nightly build if you want this feature. You can get the nighly d...
-
05:30 AM Feature request #8766: Atlas current feature filter
- My $feature+1 $id was just a temporary workaround that worked on this dataset. The code version is ebebdf3. Here is a...
-
- I wouldn't use $feature + 1 because $feature is just a count and $id is not ordered or can having missing numbers so ...
-
- Atlas composer is active, and I have the $feature function. I took your idea and put ($feature + 1) = $id in the styl...
-
- Atlas composer is active, and I have the $feature function. I took your idea and put ($feature + 1) = $id in the styl...
-
- Have you enabled Atlas in the composer. It will only be active then.
-
- Thank you Nathan, this is perfect. How do I go about implementing this fix? I downloaded and installed the most recen...
-
- I'm going to put this as a "feature request" though it might be considered a bug.
I have three band raster data. On ... -
04:04 AM Bug report #9042 (Closed): Point displacement circle line width
- Hi!
I need to remove circle between displaced point (with "Point Displacement"). If I use line width 0.00, line stil... -
01:17 AM Bug report #9041 (Closed): Text annotations' symbols seems not work correctly
- In QGIS Desktop, although in the map canvas you choose a symbol for a text annotation, in the map composer it seems t...
2013-11-10
-
- I remember this has been discussed before (maybe mailing list?).
Alternatives:
- Save to file (So it can be used fro... -
- This idea was taken from Arcgis and was suggested by people that do a lot of attributes editing:
* the user select...
2013-11-09
-
- George Rodrigues da Cunha Silva wrote:
> For it seems doable, but I'm not a C++ dev.
>
> Our company is willing to f... -
05:07 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
- For it seems doable, but I'm not a C++ dev.
Our company is willing to fund a fix for this issue, but so far we have ... -
04:00 AM Bug report #9038 (Closed): Dangling rubberband while out of edit mode
- Steps to reproduce:
1. Enter edit mode for a polygon layer
2. Select "New Feature" tool
3. Start editing a new featur... -
- Opening a PostGIS connection whose name hasn't been specified in the connection manager (to rely on libpq defaults) r...
2013-11-08
-
- Nathan also confirmed spatialite node missing on his running windows version of qgis master build.
-
- In latest osgeo4w qgis master builds, the db manager's spatialite node is gone, with only postgresql node showing up....
-
- Legend symbol has indeed never worked with data defined symbology. I feel it's not a bug but rather a lack in impleme...
-
- Giovanni Manghi wrote:
> it means that in 1.8 used to work?
No this is a new 2.0 feature.
-
- Giovanni Manghi wrote:
> it means that in 1.8 used to work?
No this is a new 2.0 feature.
-
08:19 AM Bug report #9034: Symbol not visible in TOC when size is set in data defined properties
- I don't know. I haven't got a qgis 1.8 installed yet in order to test it.
-
- it means that in 1.8 used to work?
-
- On Qgis 2.0, when the point simbol size is set in "data defined properties" the simbol is no more diplayed in TOC.
-
- @Jonathan Moules: when I found out I had exactly that reaction. But then I tried to find a way to do it.
So imagine ... -
- @Richard - If I'm understanding your comments, you are suggesting I should disable caching? Jukka pointed that one ou...
-
- QGIS master compiles OK, here's the successful config it used on the same Arch Linux x86_64 system....
-
- I've applied the patches from these two related issues:
* #8507
* #8601
This ticket is closely related to #8826 but ... -
09:21 AM Bug report #8128 (Closed): WFS client: wrong type on empty MultiLines layers
- This bug was in fact due to a wrong implementation on the server side. Sorry for the noise.
-
- What about changing the algorithm avoiding the recursive intersection approach ? You could extract all the linework o...
-
- Bo Victor Thomsen wrote:
> Alvaro -
> I've just tried the Postgis layer on the latest 32 bit QGIS Master and Current(... -
- Couple issues with zooming to a WFS layer:
a) If I have a new project and add a WFS layer, it doesn't automatically ... -
- Sandro Santilli wrote:
> What about changing the algorithm avoiding the recursive intersection approach ?
> You could... -
- What about changing the algorithm avoiding the recursive intersection approach ?
You could extract all the linework o...
2013-11-07
-
- Hi ,
in current Master, LINESTRINGM object are not diplayed when they are in 2.0.
I didn't check if other 3d geometr... -
- Nathan Woodrow wrote:
> Regis,
>
> You could do this in using a CASE in a label expression (for now)
>
> @CASE
> W... -
- kudos Nathan, that's very useful
-
- Regis,
You could do this in using a CASE in a label expression (for now)
@CASE
WHEN $id = $currentfeature THEN "yo... -
- Hi, I was about to ask the same feature! So great.. The idea was to be able to filter labeling only in currentfeature...
-
- Now that we have $currentfeature we can match that in a rule to highlight the active Atlas feature.
!http://i.imgur.... -
- Now that we have $currentfeature we can match that in a rule to highlight the active Atlas feature.
!http://i.imgur.... - 03:11 AM Feature request #8766 (Closed): Atlas current feature filter
- Fixed in changeset commit:"bff6fe5913f2666b5d90cea47ae062b429604a22".
-
- Hi Rui,
yes it is a known issue in qgis 2 when OTFR is ON and already fixed in master. Cheers! -
- Hi Rui,
yes it is a known issue in qgis 2 when OTFR is ON and already fixed in master. Cheers! -
- In QGIS2 (stable version, MacOSX Mavericks), the calculation of the area of objects within a polygon layer seems to b...
-
12:54 PM Bug report #9030 (Closed): WMS passwords stored in plaintext even if not chosen to
- When adding a WMS layer, even if you choose not to save the password, the password will be stored in plain text in th...
-
- I just uninstalled the 64-bit version and downloaded the 32-bit installer. It doesn't seem to have the same problem....
-
- No, sorry, I wasn't clear. I have a layer I use for making Atlas Coverages. It's got not nulls and various triggers...
-
- Hm, I don't really understand. You're digitizing on a layer with NULL contraints, you aren't entering non-NULL value...
-
- One exception: integer primary key still writes
-
- In 2.0, NULL values are written to any Spatialite columns defined as integers when an object is first created.
Subseq... -
- Brian Freed wrote:
> I've been getting the same behavior on a couple different projects now.
>
> Transform error cau... -
- Brian Freed wrote:
> I've been getting the same behavior on a couple different projects now.
>
> Transform error cau... -
- I've been getting the same behavior on a couple different projects now....
-
> We are desperate for a solution and I really do NOT want to stop using QGis, as my next best option would be ArcGI...-
- Hello guys,
In the lack of a better fix (it seems the problem is in GEOS itself, not in QGis), I would suggest that ... -
- see also #9014
-
- Duplicate of #8174
and I agree that this is a HUGE issue for real life work. -
- Duplicate of #8174
and I agree that this is a HUGE issue for real life work. -
-
- I'm not sure about edge-case. The behaviour is there 100% of the time. It's just that stage 1 is super-quick for smal...
-
> I'm testing using absurdly large files (5GB JP2 that's ~40GB uncompressed).
sounds like an edge case-
- Alvaro -
I've just tried the Postgis layer on the latest 32 bit QGIS Master and Current(2.0.1-3) installed with the O... -
- here:
http://www.qgis.org/en/docs/pyqgis_developer_cookbook/loadlayer.html#raster-layers
the code:
rlayer = QgsRaste... -
- Please attach a sample project (and data) to allow us try replicate locally. Cheers!
-
- Please attach a sample project (and data) to allow us try replicate locally. Cheers!
-
- Please attach a sample project (and data) to allow us try replicate locally. Cheers!
-
-
01:12 AM Bug report #9027 (Closed): Import vector to GeoServer not working
- I am having trouble getting a vector onto GeoServer using the Processing Toolbox (Formerly SEXTANTE) tool 'Import vec...
2013-11-06
-
- This server has some open-for-all WFS layers and some which need authentication
http://tampere.navici.com/tampere_wf... -
- You can install an updated version of Processing via the Plugin installer in QGIS 2.0.1.
-
07:58 PM Bug report #8877: Kriging from SAGA (Processing) fails to run
- Just updated from master and on Ubuntu the Kriging seems to work with SAGA 2.1. Do you know if the changes are going ...
-
12:33 AM Bug report #9025 (Closed): Character encoding when connection to PostGIS failed
- See screenshot
-
12:30 AM Bug report #9024 (Closed): core dump on opening project
- 2.0.1 master. Opening a project that worked a few weeks ago, just a few tiffs and shapefiles (no vrt as implied in th...
-
- I just noticed this bug is still about in version 2.0 64 bit on Windows.
It was difficult to discover that it was in... -
03:21 PM Feature request #9023 (Closed): QGIS cannot open geopdf under Windows (works on Linux)
- pdf is still not supported on windows (both 32b and 64b) whereas it seems to be on Linux and even though is says so w...
-
- Fixed in changeset commit:b6f752546776f4d5f51f7ccc32cb8c9a3e7d4a83"
-
- since we have the DPI-mode selection option for WMS connections there is also the caption/title of that dropdown visi...
-
- QGIS v1.8 introduced support for editing Spatialite views defined with 'instead of' triggers.
In QGIS 2.0, views are... -
- I've looked up wfs in docs:
http://www.qgis.org/en/docs/user_manual/working_with_ogc/ogc_client_support.html?highlig... -
- Hi, I think this is a documentation problem. Please read:
http://www.qgis.nl/2013/04/29/qgis-en-wfs-caching/
When y... -
12:34 PM Feature request #9020 (Closed): Add usesGeometry argument in qgsfunction decorator for use Exp...
- I would like fetch the geometry field inside the Expression's function.
At the moment, i can use the Geometry field f... -
- This seems to be a little nuanced after all.
I'm testing using absurdly large files (5GB JP2 that's ~40GB uncompress... -
- I start a "Save as" for a raster layer. No matter what settings I use, or the source format, pressing "Abort" once th...
-
- I've been using the direct "Add Oracle Spatial Layer" feature and created a few connections.
I've just discovered th... -
- 1) Right click on a raster layer and go "Save as"
2) Click "Browse".
No matter how many times I have saved a file wi... -
08:29 AM Bug report #9016 (Closed): WMTS in QGIS 2.0.1 only returning 1 tile
- I've tried connecting to our (Ordnance Survey's) WMTS paid service in QGIS 2.0.1. It appears to connect ok and return...
-
07:24 AM Bug report #9015 (Closed): API: Using a QgsVectorLayer from an unusable uri crashes QGIS
- Hi Luigi,
and thanks for the tip. I was studying the api doc for QgsVectorLayer up and down. I quickly checked and re... -
- Hi Luigi,
and thanks for the tip. I was studying the api doc for QgsVectorLayer up and down. I quickly checked and re... -
- try to use isValid() call before to use the layer.
http://www.qgis.org/api/classQgsDataProvider.html#a1f805f593a0fa0... -
- In my Python plugin I create layers from PostGIS tables
@# db is a valid QtSql.QSqlDataBase object
uri = QgsDataSourc... -
- Just to let you know,
We tried with "enable topological editing" on and off, as suggested by Marco on #4880. The err... -
- Hello everyone,
This is a serious bug and it's causing a lot of trouble for us.
We are using Quantum GIS 2.0 in car... -
- Hello Jurgen,
I configured this bug to be of high priority because it cause massive problems with digitizing land-us... -
- Hello all,
When digitizing with "avoid intersections" option turned on, QGIS should detect the layer type when creat... -
- Many thanks. I'll try and test it next week then.
-
- Jonathan Moules wrote:
> Hmmm. I didn't know they were still going on. I can't find them on the new website - http://... -
- Hmmm. I didn't know they were still going on. I can't find them on the new website - http://www.qgis.org/en/site/foru...
-
- Jonathan Moules wrote:
> Many thanks Jürgen - I'll test it in the next stable. :-)
So there's no need for the weekli... -
- Many thanks Jürgen - I'll test it in the next stable. :-)
-
- it would help to have just one repetition of the input pattern in the SVG to avoid the unwanted effect - might not be...
2013-11-05
-
12:19 AM Bug report #9012 (Closed): Wrong symbol size after saving print composer as image
- Saving a composition doesn't work properly for maps with graduated symbols. On the saved image, the symbols are much ...
-
- Bo Victor Thomsen wrote:
> Alvaro -
> Sorry for being late to the party, I was at a mapping conference. Just to answ... -
- Alvaro -
Sorry for being late to the party, I was at a mapping conference. Just to answer your questions even though... -
- Bo Victor Thomsen wrote:
> Alvaro -
>
> I've tried your patched version of QGIS. Works nicely with shape files an... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > > Note: The improvement is very perceptible?
> >
> >
> > yes :)
>... -
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > > Note: The improvement is very perceptible?
> >
> >
> > yes :)
>... -
- Giovanni Manghi wrote:
> > Note: The improvement is very perceptible?
>
>
> yes :)
I am delighted to read that.
I... -
> Note: The improvement is very perceptible?
yes :)-
04:30 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- I tested with a shapefile containing 75k polygons and although I don't have a quantitative analysis, I can say that t...
-
- I tested with a shapefile containing 75k polygons and although I don't have a quantitative analysis, I can say that t...
-
- Matthias Kuhn wrote:
> Alvaro,
>
> I can imagine to enable this functionality for screen rendering by default sooner... -
- Giovanni Manghi wrote:
> Bo Victor Thomsen wrote:
> > Alvaro -
> >
> > I've tried your patched version of QGIS. Work... -
> Done:
> http://www.filedropper.com/qgis-osgeo4w-210-f8725-setup-x86
>
> It contains the Windows Installer with th...-
- Bo Victor Thomsen wrote:
> Alvaro -
>
> I've tried your patched version of QGIS. Works nicely with shape files and w... -
- Alvaro -
I've tried your patched version of QGIS. Works nicely with shape files and with large speed improvements. H... -
- Fixed in changeset commit:"4f937ae667b31a4bc067c3c85ae5868077610c43".
-
- implemented in commit:45fea7b46
-
- implemented in commit:45fea7b46
-
- I believe it's a result of this, but if I have a QGIS project with multiple Oracle layers in it. When I load the proj...
-
- Fixed in changeset commit:"e3e22be36f50695739a47789e758f7f9abeef940".
-
06:26 AM Bug report #9011 (Closed): PostGis 2.1.0 deprecated signature
- Hi,
Our dba report us that in the postgres database (9.3) log there are some warning:... -
- 1) Start QGIS - Add a layer in EPSG:27700 (British National Grid). 27700 is my qgis default projection.
2) Ensure "e... -
- Hi, when using field calculator in arttribute, it would be great that the dialog keep in memory the expression and pa...
-
- If the provider is capabable to determine a maximum length, QGIS should already not allow to enter more data. And if...
-
- Hi Regis,
it would be interesting to check if this was an issue also in qgis 1.8, then if not tag this a regression.
... -
- Hi,
When editing data in attribute view, if commit is raising error, there is no way to save pending edits.
More ... -
- you are right, despite the fact that qgis/windows now comes with gdal 1.10 and that this has geopdf support active th...
2013-11-04
-
- Is this issue still valid or can it be closed?
-
09:44 PM Bug report #9007 (Closed): MS SQL uniqueidentifier data type is not supported
- If a MS SQL Spatial layer uses <uniqueidentifier> data type then layer attribute table displays as all nulls and the ...
-
07:36 PM Feature request #9006 (Closed): Invert color ramp on vector layers
- I would love an option to invert color ramps when classifying data on vector layers. Sometimes the values need to be ...
-
- Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > Marco Hugentobler wrote:
> > > I've done some tests with the patch,... -
> Hi Giovanni, now I am going to make a Windows Installer with the current patch state.
> Telling you as I have!
th...-
- Hi Matthias, I can add other option to the new 'fast drawing' box in the 'rendering' options panel for the 'AA-disabl...
-
- Alvaro,
I can imagine to enable this functionality for screen rendering by default sooner or later, but only if all ... -
- Giovanni Manghi wrote:
> Marco Hugentobler wrote:
> > I've done some tests with the patch, and I have mixed feelings ... -
- Alvaro Huarte wrote:
> Nathan Woodrow wrote:
> > Marco Hugentobler wrote:
> > > I've done some tests with the patch, ... -
- regis Haubourg wrote:
> > Referred to append a new extra option for disable the 'AA' of far geometries, I think that ... -
- > Referred to append a new extra option for disable the 'AA' of far geometries, I think that if the user already acti...
-
- Matthias Kuhn wrote:
> Thank you for this nice table.
> So, disabling AA indeed seems to result in a noticeable diffe... -
- Thank you for this nice table.
So, disabling AA indeed seems to result in a noticeable difference in some cases.
I wo... -
05:52 PM Bug report #9005 (Closed): unable to open postgis data source attribute table in QGIS
- I'm using QGIS 2.0.1 on Linux Mint 13 LTS (QGIS installed from Ubuntu 12.04 repository)
I can happily connect to & pl... -
- How did you do manage to get it loaded ? I still cannot load this pdf either on win32 or win64 (both have the latest ...
-
- I save the GCP report just fine, but it does not export the deltas and RMS error calculations.
I need this to justif... -
- Hello Giovanni,
I've checked this twice and found to be a problem with the project configuration. Without any other ... -
- I think this would really improve the usability of QGIS and is probably not that hard to implement (i would guess). J...
-
- This is sometimes useful when doing advanced symbology, for example when you need symbols on both sides of the line, ...
-
- see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
-
- see "OSGeo4W !#388":http://trac.osgeo.org/osgeo4w/ticket/388
-
- currently scale bar cannot be rotated whilst all other composer items can.
-
- Added a pull request to fix the issue:
https://github.com/qgis/QGIS/pull/984 -
03:24 AM Bug report #8998 (Closed): size of the symbols changes when exported
- Add a point vector layer and make the size of the symbols dependent of any field, using the "advanced" button ("champ...
-
- Changes to vector memory layer attributes are not written to project file because QgsMapLayer::readLayerXML() is usin...
-
- This should be fixed by pull-request https://github.com/qgis/QGIS/pull/963
-
- When I try to set composition to composer instance, created from plugin, QGIS crashes. Sometimes composer created, bu...
-
- Yes: I think one should be able to specify the size of the scale bar on the page, and the number of segments should b...
-
02:19 AM Feature request #8995: [composer] Size of scale bar bloated (problem for Atlas, LizMap, QWC)
- I can see what you mean .. And I can imagine where the problem is ..
But AFAIK QGIS is working fine with Scalebars..... -
- If a scale is correctly defined, then the scale of the map is changed (as it happens e.g. for Atlas printing at varyi...
-
- When I check the validity of a closed polyline, I get these results using different tools:
- no errors using Topolog...
2013-11-03
-
- sorry for the noise
-
- It's still there -- it's just been moved to the "View" menu.
-
- It seems that in qgis master there option to enable the snapping grid (in the "composition" tab) is gone.
-
- Matthias Kuhn wrote:
> Hi Alvaro,
>
> The effect of disabled anti-aliasing is still perceptible here.
> Which portio... -
- in qgis master, when activating the "draw coordinates" option for the map object, make the resize of the same object ...
-
- in the grass plugin message is
Module nviz not found -
- Anyway I tested 1.7.4 and it was working correctly. In the off line table the primary key field was supposed to be le...
-
- Anyway I tested 1.7.4 and it was working correctly. In the off line table the primary key field was supposed to be le...
-
- Anyway I tested 1.7.4 and it was working correctly. In the off line table the primary key field was supposed to be le...
-
- The original issue (as reported for Mac) has been fixed in master branch with commit commit:d8e5c2f8
-
- Jukka Rahkonen wrote:
> http://hip.latuviitta.org/cgi-bin/tinyows
>
> I used the feature type "municipalities". It i... -
- Jukka Rahkonen wrote:
> http://hip.latuviitta.org/cgi-bin/tinyows
>
> I used the feature type "municipalities". It i... -
- http://hip.latuviitta.org/cgi-bin/tinyows
I used the feature type "municipalities". It is my own server and I know f... -
- Jukka Rahkonen wrote:
> Hi,
>
> The shortcut points to that qgis.bat file I referred as
> "C:\\Program Files\\QGIS D... -
-
- Sorry, the fix was not for this issue.
Anyone could reopen it ? I cannot seem to change issue status! -
- Fixed in changeset commit:"4ddc948c7b2ab0bc4c8d32093c10b4b532434f49".
-
- Hi,
me too.
QGIS Desktop 2.01 on Windows, Mac OS X (10.9) and Ubuntu 13.10 crashed when:
http://download.geofabri... -
- Fixed in commit:4ddc948c7b2ab0bc4c8d32093c10b4b532434f49
-
- it affects also the GRASS region -> select extent form canvas
in the processing toolbox. -
- Fixed in changeset commit:"fb4409b24e72010e8f6771601691609d300d64b9".
-
- It does not happen with all layers, but it happens with many (sample attached).
I even seen a crash. Definitely a re... -
- It does not happen with all layers, but it happens with many (sample attached).
I even seen a crash. Definitely a re... -
- It does not happen with all layers, but it happens with many (sample attached).
I even seen a crash. Definitely a re... -
- It does not happen with all layers, but it happens with many (sample attached).
I even seen a crash. Definitely a re... -
- It does not happen with all layers, but it happens with many (sample attached).
I even seen a crash. Definitely a re... -
- I've also tested latest master and still get the problem.
-
- Jürgen Fischer wrote:
> Should already fixed in master.
it does not seems, in the log I see messages like
repeat ti... -
- Implemented also loading of category names by GDAL provider from original data. The function name is GDALGetRasterCat...
-
- Fixed in changeset commit:"8bdaf42dbaec240151eacaa9a28e02f49a53fd66".
-
- duplicate of #8626
-
- duplicate of #8626
-
- It is the "/" in the column name the origin of the issue.
-
- It is the "/" in the column name the origin of the issue.
-
- It is the "/" in the column name the origin of the issue.
-
- It is the "/" in the column name the origin of the issue.
-
- It is the "/" in the column name the origin of the issue.
2013-11-02
-
12:52 AM Bug report #8988 (Closed): "Export/Add geometry columns" error for layers with line geometries
- Log output:...
-
- Under the stable QGIS version 2 and Night Build QGIS 2.1 DEV 47b055f and prior ones, when we use the Processing toolb...
-
- In QGIS 2.1 DEV 47b055f, and the two previous Night Builds, if we use Properties->Stile->Categorized and classify usi...
-
- Would be more usable if the add WMT-S layer UI used (maybe optionally?) the WMT-S get capabilities “Title” value rath...
-
- Should already be fixed in master.
-
- When I try to load a EPSG:2193 tileset from this http://data-test.linz.govt.nz/services;key=fbd75769082f4e4eac32dcff3...
-
- Hi,
The shortcut points to that qgis.bat file I referred as
"C:\\Program Files\\QGIS Dufour\\bin\
ircmd.exe" exec hi... -
- Jukka Rahkonen wrote:
> Sorry, but I do not know how to start QGIS with no plugins on Windows. I suppose I should edi... -
- Sorry, but I do not know how to start QGIS with no plugins on Windows. I suppose I should edit something in the file ...
-
- Jukka Rahkonen wrote:
> Hi,
>
> Same crash happens for me but a bit earlier. Load data from WFS, open attribute tabl... -
- Alvaro Huarte wrote:
> Alexander Bruy wrote:
> > Nathan Woodrow wrote:
> > > I seem to be having a small issue with t... -
- Nyall Dawson wrote:
> Ok - in that case I run into this same issue almost daily, and any improvements would be greatl... -
- Fixed in changeset commit:"169f646f7ca7626ce35349c9ff8b77ba3c0dad6d".
-
07:31 AM Bug report #8982 (Closed): iface.actionZoomNext() missing for Python
- There is iface.actionZoomLast() but iface.actionZoomNext() is missing for Python.
-
- Fixed in changeset commit:"a7a4452e79187cb80b2ca53f26bc40f7cb80231e".
-
- Vincent Schut wrote:
> NB the categories support in gdal seems generic, see the GDALRasterBand:GetCategoryNames metho... -
- Vincent Schut wrote:
> NB the categories support in gdal seems generic, see the GDALRasterBand:GetCategoryNames metho... -
- Fixed in changeset commit:"24bcec43d5faf7bc8578577a31de66d071997fa4".
-
- Full fix by Jef in commit:0a1d44fc
-
- Full fix by Jef in commit:0a1d44fc
Also available in: Atom