Activity

From 2011-09-29 to 2011-10-28

2011-10-28

03:53 PM Feature request #3212: Add to the action the choice of Python but getting the code from a file
If I understand correctly, I think this can already be done. I use the following action in QGIS 1.7.0 to call a pytho... Cyrus Hiatt
03:16 PM Feature request #3136: Update NZ projections for grid transformation support
BTW: I've looked at this issue before and it does seem like there isn't an easy fix.
As far as I can see the proj4 e...
Jeremy Palmer
01:45 PM Feature request #3136: Update NZ projections for grid transformation support
Hi Alister,
I think the best option is to patch NZGD49 based proj.4 and gdal definitions upstream so that the nzgd2k...
Jeremy Palmer
07:53 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
you may want to try a Virtual Machine first ;) there are plenty already available made with different Linux distribut... Giovanni Manghi
06:35 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
It started today, and it doesn't go away. My ubuntu is 11.10 amd64 and I installed qgis both from the ubuntugis ppa (... Matteo Fortini
06:13 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
I am running QGIS-master on Ubuntu 11.10 (on different machines) and I don't see this problem. Clean install? from th... Giovanni Manghi
06:11 AM Bug report #4456 (Closed): Segfault in Ubuntu 11.10 Oneiric Ocelot
QGis randomly segfaults, for example while switching back to "old symbols" for a layer, or reopening a project.
While...
Matteo Fortini
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine
Patch for fix. Nathan Woodrow
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine
Patch for fix. Nathan Woodrow
05:46 AM Bug report #4011: Map canvas flickers when content is dragged
I see it too... but I am almost sure that until a few days ago (qgis master on Ubuntu) it wasn't doing it.
Tim Sutt...
Giovanni Manghi
05:42 AM Bug report #4011: Map canvas flickers when content is dragged
I can replicate on ubuntu 11.10 running xfce4
see
http://www.youtube.com/watch?v=w3xO21xXxeI
Tim Sutton
05:27 AM Bug report #4439: Crash when changing style in Layer Properties
marsofearth - wrote:
> Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a...
Ivan Mincik

2011-10-27

01:06 AM Feature request #3742: Save extent after reprojection
N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:06 AM Feature request #3742: Save extent after reprojection
N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
Duplicate #3742 Alexander Bruy
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
Duplicate #3742 Alexander Bruy
11:40 PM Feature request #4455: Feature: update map extent when changing project CRS
Sorry, I'm not sure whether the right category is Gui or Projection Support or what. Alister Hood
11:39 PM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
(I thought there was already a ticket for this, but I can't find it)
Currently, if on-the-fly CRS conversion is enab...
Alister Hood
12:19 AM Feature request #3136: Update NZ projections for grid transformation support
Hi Jeremy,
Are you aware that when QGIS is installed now (unless installing from source) the srs.db is automatically ...
Alister Hood
12:09 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
If anyone is coming to this cold, some of the history of the syncing can be found at #3645 Alister Hood
09:06 PM Bug report #4454: multiline labels overlap in the labeling-ng engine
The code should be:... Mathieu Pellerin - nIRV
08:52 PM Bug report #4454: multiline labels overlap in the labeling-ng engine
I'm pretty sure I found the problem.
The multiline label's width is determined in the void QgsPalLayerSettings::calc...
Mathieu Pellerin - nIRV
08:24 PM Bug report #4454 (Closed): multiline labels overlap in the labeling-ng engine
The recently added expression-based label feature exposed an issue with multiline support in the labeling-ng engine.
...
Mathieu Pellerin - nIRV
08:05 PM Bug report #4453 (Closed): Relative symbol angle overridden by layer angle
When I create a symbol with different symbol layers, I can put a relative angle between them (say, two triangles with... Leyan Ouyang
07:59 PM Bug report #4452 (Closed): Encoding issue in Metadata tab
If path to file contains cyrillic symbols then in metadata tab it looks gibberish. dr -
07:45 PM Bug report #4133: Identify results - previous state (location, docked status, size) is not saved
Possibly also related to #4019. Alister Hood
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...
Seems duplicates #206 Alexander Bruy
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...
Seems duplicates #206 Alexander Bruy
04:38 PM Bug report #4439: Crash when changing style in Layer Properties
Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a selected shapefile, do... Mars Sjoden
04:18 PM Bug report #4451 (Closed): (regression) Inconsistent behavior in the table of attributes after di...
The issue is rather easy to replicate but I can't find the proper words to describe it briefly, so I'll list instead ... Giovanni Manghi
01:31 PM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.
added debug output
Also finding similar issues on Ubuntu 11.04 with 1.7.1, Fedora 15 with 1.7.1, and OpenSUSE 11. Ra...
Mars Sjoden
12:52 PM Bug report #3497: [OsX] Crash when changing font and color in Style manager on OS X
jeronimo diaz wrote:
> Hello ! This is my first time here, I'm not english native speaker but I'm willing to enter t...
Mars Sjoden
11:36 AM Bug report #4171 (Closed): outline width of ellipse marker not properly rendered when printing to...
Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel
Applied in commit:b0112f1c42. Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel
Applied in commit:b0112f1c42. Alexander Bruy
11:15 AM Feature request #1609: QGIS4INSPIRE
Seems that we already have several plugins related to metadata: MetaEdit, Metatools and CSWClient Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS
There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS
There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size
see also #4133 Giovanni Manghi
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size
see also #4133 Giovanni Manghi
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin
Yes, thanks. Paolo Cavallini
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin
Yes, thanks. Paolo Cavallini
09:54 AM Feature request #3382: Include Orfeo Toolbox plugin
Can we close this ticket? Orfeo Toolbox modules now available with as ProcessingFramework module Alexander Bruy
06:45 AM Feature request #4450 (Open): Legend symbols (in print composer) are ignoring the "scale size fie...
As result all the symbols do show of the same size. Giovanni Manghi

2011-10-26

08:31 PM Bug report #4011: Map canvas flickers when content is dragged
Just wanted to update this issue as it is still a big problem on Ubuntu. The MapCanvas still flickers constantly as t... sowelu -
05:39 PM Bug report #4449: strange behaviour of piechart function of QGIS
I can confirm. The pink one at the top should have nothing, or at least see though.
!http://i.imgur.com/RymUg.png!
...
Nathan Woodrow
08:15 AM Bug report #4449: strange behaviour of piechart function of QGIS
Giovanni Manghi wrote:
> Can you please attach a small sample of your data?
I can give it to you tomorrow morning, b...
lokheart _
08:06 AM Bug report #4449: strange behaviour of piechart function of QGIS
Can you please attach a small sample of your data? Giovanni Manghi
08:04 AM Bug report #4449 (Closed): strange behaviour of piechart function of QGIS
I am using QGIS to visual health status of elderly in an elderly home, whether they have medical devices or not is on... lokheart _
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
06:36 AM Feature request #3200: Feature cache
I would change the expected version for this patch to 2.0.0, waiting to include it along the multi threaded rendering Giovanni Allegri
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
06:46 AM Bug report #4442: Multi line labels render on one line with curved labels
The curved placement is not really meant to draw multiline labels: each character of the text is rotated to have base... Martin Dobias
04:26 AM Feature request #4448 (Open): add resample option/tool to gdal tools
I suggest to add another option to those listed in #2930, to let users create a resampled raster setting the output p... Giovanni Allegri
02:22 AM Bug report #4447 (Closed): basic statistics not available for joined attributes
* Load a vector file.
* Load a dbf with attributes
* Join the dbf to the vector file
* Use Vector->Analysis tools->Ba...
mlennert -

2011-10-25

12:56 AM Bug report #1389: The config file (/grass/config/default.qgc) not found
I have recently downloaded qgis from git and compiled and I can confirm this behaviour on my computer too. When I try... Anna Kratochvilova
12:49 AM Bug report #4444 (Closed): Error when loading Python plugins
On QGIS start-up Python error has occurred.
Message from Python error window:...
Vaclav Petras
11:57 PM Bug report #4443 (Closed): WMS 1.3.0 axis order
In WMS 1.3.0 the axis order of a lot of SRS has changed.
Several GIS Packages have been modified to correctly implem...
Jeff Konnen
07:29 PM Feature request #3200: Feature cache
+1 to this
This patch plus the multi-threaded rendering could add some good speed to QGIS.
Nathan Woodrow
04:12 PM Bug report #2352 (Closed): map is drawn twice on toggling a layer's visibility
Giovanni Manghi
04:02 PM Bug report #4442 (Closed): Multi line labels render on one line with curved labels
If you have a multi line label and use curved labeling the label will be rendered on one line ignoring the multi line... Nathan Woodrow
03:51 PM Bug report #4393: Rasterlite layers on Windows as 0,0,0
Confirmed with the laster trunk/osgeo4w. Works fine on trunk/Linux (Ubuntu) Giovanni Manghi

2011-10-24

01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
04:49 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...
http://lists.osgeo.org/pipermail/qgis-user/2011-October/013940.html
7 feedback, all positive, until now.
Giovanni Manghi
03:54 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...
The issue has been discussed in the QGIS-USERS mailing list and all the feedback have been in favor of this change. Giovanni Manghi
03:53 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
My point of view, after giving many training courses, is that the default option should be changed to "prompt for CRS... Giovanni Manghi
12:54 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Jürgen Fischer wrote:
> Alister Hood wrote:
> > I have spent some more time trying to understand this.
> > For the re...
Alister Hood
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:49 PM Bug report #4441 (Closed): Expression parser: some expressions evaluate to NULL when they shouldn't
example 1:
I can create a string attribute field called "test1" and fill it using @$perimeter@
I can then fill it usi...
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
10:59 PM Bug report #4425: Add a capitalize() function to the expression based labeling engine
Martin,
Seems that MS SQL doesn't have a function. You have to define your own :S I suggest we follow postgresql an...
Nathan Woodrow
10:58 PM Bug report #4440 (Closed): Old project message references trac, not redmine
When opening a project file from a previous version of QGIS a message is displayed.
As at 1.8.0-116 this still refe...
ramon .
10:52 PM Bug report #4426: Add a number_format() function to the QgsExpression
Just changed the header as it's more related to the expression parser itself rather than the labeling per sa Nathan Woodrow
10:41 PM Bug report #4426: Add a number_format() function to the QgsExpression
Also note that there is a "formatted numbers" section in the main labelling dialogue under "label settings", and:
1) ...
Alister Hood
10:37 PM Bug report #4426: Add a number_format() function to the QgsExpression
This would be an important feature. In the meantime you might be able to achieve what you need using something like ... Alister Hood
02:32 PM Bug report #4439 (Closed): Crash when changing style in Layer Properties
My QGIS is frequently crashing when changing Styles in Layer Properties.
I see many possibly related issues to this o...
Ivan Mincik
12:36 PM Bug report #4409 (Closed): Weird behaviour on Mac OS
Giovanni Manghi
12:31 PM Bug report #4409: Weird behaviour on Mac OS
You are right thanks. It just didn't come to my mind, sorry.
Thanks again
Dejan Gambin
08:14 AM Bug report #4409: Weird behaviour on Mac OS
That's full-screen mode. You must have hit apple-F at some point. Apple-F again should return you to windowed mode. William Kyngesburye
07:04 AM Bug report #4409: Weird behaviour on Mac OS
Unfortunatelly I have only one Mac. Maybe I can ask someone to give it a try, but not sure :-( Dejan Gambin
07:01 AM Bug report #4409: Weird behaviour on Mac OS
Dejan Gambin wrote:
> Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
>...
Giovanni Manghi
06:53 AM Bug report #4409: Weird behaviour on Mac OS
Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
One possible related t...
Dejan Gambin
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS
Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal...
Giovanni Manghi
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS
Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal...
Giovanni Manghi
12:31 PM Feature request #4365: Add log/ln functions to the field calculator
Nathan's new expression builder (developed for expression-based labeling) should be integrated into field calculator ... Martin Dobias
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator
They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator
They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
11:19 AM Feature request #4438 (Closed): Option to add datasources icons beside layer names in the TOC
QGIS can use a large number of datasources: file based rasters, shapes, spatialite, postgis, postgis rasters, grass, ... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
10:33 AM Bug report #4437 (Closed): DB-Manager: python error
Hi,
opening the db-manager plugin and try-ing to open a postgis connection,
I see this python error:...
aperi2007 -
08:44 AM Feature request #4436 (Closed): snapping when moving
Snapping doesn't work when moving a feature. For example, if I move a feature towards another, it doesn't snapp even ... elcuco -
08:37 AM Feature request #4435 (Closed): extent snapping options
hello!
It would be a great feature if the "Avoid intersection" in the "Snapping Options" could work even between diff...
elcuco -
08:23 AM Bug report #4433: Edit vertex tool very slow
Also on Debian, and Windows 7 and Vista, apparently Paolo Cavallini
03:56 AM Bug report #4433 (Closed): Edit vertex tool very slow
Dear developers,
we noticed that the tool for the vertex edit since the version 1.5 is very slow.
When we try to edit...
Marica Landini bulma
08:18 AM Bug report #4420 (Closed): Editing label properties makes labels disappear
Paolo Cavallini
06:17 AM Bug report #4420 (Feedback): Editing label properties makes labels disappear
I cannot confirm on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
08:03 AM Bug report #4421: Raster are very slow to load when calculating stats
The raster has a colour table, so stretching does not apply Paolo Cavallini
08:00 AM Bug report #4421: Raster are very slow to load when calculating stats
Maybe this is because in one PC contrast enhancement is set to something different than "No Stretch" (see #3867). Try... Alexander Bruy
07:06 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats
Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:59 AM Bug report #4421: Raster are very slow to load when calculating stats
Verified: on one machine it is slow, on another is fast. It might depend on some setting, still to understand which Paolo Cavallini
06:09 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats
Not confirmed here with qgis-trunk on Ubuntu 11.10, the linked sample data is still lightning fast to open. Please le... Giovanni Manghi
07:07 AM Bug report #4422 (Closed): Tileslider not working
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:07 AM Bug report #4422 (Closed): Tileslider not working
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:06 AM Bug report #4422 (Feedback): Tileslider not working
Not confirmed here. It works only if the WMS server is a tiled one, like a tileache one. Try this:
http://tilecache...
Giovanni Manghi
06:39 AM Bug report #4415 (Feedback): Centroid in fTools different form centroid fill
The explanation of the different behavior has benn given in the dev mailing list, closing? Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:49 AM Feature request #4430: Zonal statistics: please add more variables
These are the methods available in GRASS for zonal statistics
http://grass.fbk.eu/grass64/manuals/html64_user/r.stat...
Giovanni Manghi
04:19 AM Bug report #4434 (Closed): "project properties" and menu icons missing from QGIS when using UNITY...
"project properties" misses from both the "file" and the "settings" menus.
The icons problem surfaced on Ubuntu als...
Giovanni Manghi

2011-10-23

05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:29 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
It's said about QGIS mapserver that it implements WMS 1.3 as well as 1.1.1 [1]. But the GetCapabilities XML always se... Marco Lechner

2011-10-22

12:56 AM Feature request #4430 (Closed): Zonal statistics: please add more variables
e.g.
MAJORITY
MAXIMUM
MEDIAN
MINIMUM
MINORITY
RANGE
STD
VARIETY
See:
http://resource...
Paolo Cavallini
12:52 AM Feature request #4429 (Closed): Zonal statistics: please add checkbox
It would be good to have checkboxes to select only the stats of interest, not being forced to calculate them all Paolo Cavallini
09:14 PM Bug report #4428 (Closed): Diagram overlays not displaying when render caching is on
Diagram layers do not display when "Use render caching where possible to speed up redraws" is checked.
Issue is in bo...
Jesse Sheffield
02:34 PM Bug report #4427 (Closed): Disable options for interpretation of above/below and distancing when ...
The following changes since commit:a2a6e78675833a4db0286a85354bf168032d2b49:
Juergen E. Fischer (1):
more c...
Sandro Santilli
08:24 AM Bug report #4425: Add a capitalize() function to the expression based labeling engine
A little bit of research on function name in other SQL databases:
postgresql, oracle: initcap( x )
mysql, ms sql: no...
Martin Dobias
03:41 AM Bug report #4425 (Closed): Add a capitalize() function to the expression based labeling engine
This probably doesn't require a long description. It'd be useful for the expression based labeling engine to have a c... Mathieu Pellerin - nIRV
08:12 AM Bug report #3643: wrong direction of label direction symbol
Fix pushed to master as r697b35a4.
Sandro Santilli
06:21 AM Bug report #3643: wrong direction of label direction symbol
My "dirsym" branch implements solution 2 of Mayeul (as per this ticket subject).
For solution 1 see bug #4424
Sandro Santilli
06:19 AM Bug report #3643: wrong direction of label direction symbol
The following changes since commit 59be561a4d9100fb2084006c2acc7df5798c52fc:
Juergen E. Fischer (1):
fix wa...
Sandro Santilli
06:12 AM Bug report #3643: wrong direction of label direction symbol
I don't really get the meaning of "Map" vs. "Line" orientation, btw Sandro Santilli
06:07 AM Bug report #3643: wrong direction of label direction symbol
How do we reopen this bug ? I personally can't change the "Status" field. Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol
Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not...
Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol
Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not...
Sandro Santilli
02:51 AM Bug report #3643: wrong direction of label direction symbol
Mayeul: I've filed #4424 for your request. This bug was specifically about the "Add direction symbol".
By the way, n...
Sandro Santilli
05:52 AM Bug report #4284 (Closed): error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Giuseppe Sucameli
05:49 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Pushed to master by Jef (thanks!).
926b3888a15a25eb4f15d5b3fdc62a08016b20c3
d7b106fed347c4d7dcae546cb65a9a2dd6619ab0
Sandro Santilli
05:32 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Here (Ubuntu 11.04 and QT 4.7.2) the compilation still works fine and ends without errors before and after your fix. Giuseppe Sucameli
05:19 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Branch updated to include a version check:
The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd...
Sandro Santilli
05:07 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd4e:
marco (1):
Fix for ticket #441...
Sandro Santilli
04:25 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
4.6.2-0ubuntu5.3 is the version in here Sandro Santilli
04:22 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
It may be a QT bug (QT < 4.7.1), see https://bugreports.qt.nokia.com/browse/QTBUG-8549 Giuseppe Sucameli
03:47 AM Feature request #3488: Expression based labeling
Nathan, good idea.
Bug #4425: capitalize() function
Bug #4426: number_format() function
Cheers.
Mathieu Pellerin - nIRV
03:15 AM Feature request #3488: Expression based labeling
nirvn, no worries, Hopefully people find it useful. I would open a ticket if you want some other functions added.
M...
Nathan Woodrow
03:45 AM Bug report #4426 (Closed): Add a number_format() function to the QgsExpression
It'd be very useful for have a number_format() function to allow formatting of numbers with grouped thousands. For ex... Mathieu Pellerin - nIRV
02:58 AM Bug report #4424: Label orientation is limited in the left-to-right range
The reference link didn't show up properly, here it is again: #3643 Sandro Santilli
02:49 AM Bug report #4424 (Closed): Label orientation is limited in the left-to-right range
Labels (new symbology, aka ABC) can't be forced to follow line orientation, specifically written upside-down when a l... Sandro Santilli

2011-10-21

01:24 AM Feature request #3843: Rule based labeling
Also, in order for this to be satisfying for the need expressed in #3796, every label "class" will need to be configu... Sandro Santilli
01:16 AM Feature request #3843: Rule based labeling
The cherry-on-cake would then be associating "rules" to "legend items" so that you can toggle visibility of single cl... Sandro Santilli
12:51 AM Bug report #4413: Generating SVG preview takes very long
Wouldn't it be more appropriate to generate the previews during compilation? In my case it takes several minutes to g... Paolo Cavallini
01:51 PM Bug report #4413: Generating SVG preview takes very long
Well, the tmore preview directories / files you have, the longer it takes (with only the standard svg dirs enabled, i... Marco Hugentobler
02:10 AM Bug report #4413 (Closed): Generating SVG preview takes very long
When adding an image to a print layout, the generation of preview from SVG takes a very long time Paolo Cavallini
12:35 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown
Fixed in 232f1617614678115e6c42431a5976fc21f1dd4e Marco Hugentobler
02:11 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown
If I choose an svg indicator for the beginning and end of an arrow, nothing is shown Paolo Cavallini
11:30 PM Feature request #3488: Expression based labeling
Nathan, IMO a capitalize('string') function would be really, really useful alongside uppercase / lowercase. Mathieu Pellerin - nIRV
10:58 PM Feature request #3488: Expression based labeling
Nathan, thanks a gazillion times for this. Mathieu Pellerin - nIRV
08:11 AM Feature request #3488 (Closed): Expression based labeling
The pull request merged. Good work, Nathan! Martin Dobias
08:11 AM Feature request #3488 (Closed): Expression based labeling
The pull request merged. Good work, Nathan! Martin Dobias
10:20 AM Feature request #3483: Unified topological editing
FYI: I've started a project on github for postgis topology editing. At least will serve for brainstorming.
https://g...
Sandro Santilli
03:38 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Alister Hood wrote:
> I have spent some more time trying to understand this.
> For the record:
> - srs.db is not sync...
Jürgen Fischer
03:09 AM Bug report #4423 (Closed): "Invert colour map" checkbox loses the right state
Invert colour map checkbox (in raster properties) option is bugged: the flag is unchecked when re-opening the raster ... Paolo Cavallini
03:07 AM Bug report #4422 (Closed): Tileslider not working
The tile scale apparently does not work Paolo Cavallini
03:04 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
Rasterlite layers, e.g. http://download.gfoss.it/TrueMarble/TrueMarble-2km.sqlite are extremely slow to open (I remem... Paolo Cavallini
03:02 AM Bug report #4420 (Closed): Editing label properties makes labels disappear
If I edit label properties with the button (close to rotate label), the label disappears Paolo Cavallini
03:01 AM Bug report #4419 (Closed): Improve random colour ramps
The random colour ramps are generally ugly, and often colours are repeated Paolo Cavallini
03:00 AM Bug report #4418 (Closed): Random colour ramp: randomize missing
A button "Randomize" is missing for random colour ramps (currently one has to change the number of classes to have a ... Paolo Cavallini
02:59 AM Bug report #4417 (Closed): editing widgets: "slider range" and "dial range" do not show any value...
In the editing widgets, the "slider range" and "dial range" widgets do not show any value when moving or rotating (by... Paolo Cavallini
02:59 AM Bug report #4416 (Closed): Measure area wrong if ellipsoid off
The measure area tool seems to be wrong when started with the ellipsoid off (measures are doubled); switching ellipso... Paolo Cavallini
02:57 AM Bug report #4415: Centroid in fTools different form centroid fill
From the ML (thanks cfarmer):
IIRC, the centroid as returned by fTools is based on the GEOS centroid
calculation, wh...
Paolo Cavallini
02:56 AM Bug report #4415 (Closed): Centroid in fTools different form centroid fill
the centroid, as calculated by fTools, is not in the same location as the centroid shown by the centroid fill. The di... Paolo Cavallini

2011-10-20

01:40 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
I have spent some more time trying to understand this.
For the record:
- srs.db is not synced when installing from so...
Alister Hood
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy
That's intentional. Try running ... Jürgen Fischer
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy
That's intentional. Try running ... Jürgen Fischer
11:43 PM Bug report #4401 (Closed): debian build - forgotten dependancy
That's intentional. Try running ... Jürgen Fischer
09:48 AM Feature request #3483: Unified topological editing

I'd like to avoid too much abstraction on the PostGIS side actually.
All I can tell is that for postgis topology you...
Sandro Santilli
07:17 AM Feature request #3483: Unified topological editing
The main issue we are facing here is that the topological models of various data sources (grass, postgis-topo, osm) d... Martin Dobias
08:00 AM Feature request #3488: Expression based labeling
I am also in favor of keeping the current design. Further improvements may be added later if needed. Martin Dobias

2011-10-19

11:56 PM Feature request #4405: Updates to the field calculator context help
Oh, here's another one, to make the formatting consistent.
Alternatively we could identify the other function argume...
Alister Hood
06:58 PM Feature request #3483: Unified topological editing
Some ideas [[http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7638]... Luís Ferreira
02:46 PM Feature request #3488: Expression based labeling
There is a real time search at the top that limits the entries to show only stuff with that keyword.
The tab idea is...
Nathan Woodrow
02:33 PM Feature request #3488: Expression based labeling
Can I suggest a discussion/brainstorm on the UI?
I can imagine that with the full list of operators and a large numbe...
Alister Hood
05:40 AM Feature request #3488: Expression based labeling
Pull request made https://github.com/qgis/Quantum-GIS/pull/51
Still a few things to add later on but if it could be ...
Nathan Woodrow
05:51 AM Bug report #4399 (Closed): Browser does not allow to tell which layer format to load
Martin Dobias
05:50 AM Bug report #4399: Browser does not allow to tell which layer format to load
Tooltips added in commit:c3f6dff9 Martin Dobias
05:51 AM Bug report #4387 (Closed): New labelling: "add direction symbol" does not make sense for polygons...
Martin Dobias
05:51 AM Bug report #4387: New labelling: "add direction symbol" does not make sense for polygons and points
Fixed in commit:3a15509b Martin Dobias
05:49 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.
Fixed in commit:b1e50385 Martin Dobias
05:49 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.
Fixed in commit:b1e50385 Martin Dobias
05:37 AM Bug report #2491: Raster transparency doesn't handle alpha channel
Here's the pull request: https://github.com/qgis/Quantum-GIS/pull/52 Giuseppe Sucameli
04:58 AM Bug report #4412 (Closed): ftools: input layers are not presented in alphabetical order
This makes very hard to select the input layer when working with more than 10/20 layers. Giovanni Manghi
04:55 AM Bug report #4411 (Closed): Silent WMS errors
Whenever a WMS interaction goes bad for any reason (in my case the WMS server advertises wrong service url, resulting... Sandro Santilli
04:50 AM Bug report #4410 (Closed): "forward transform of... failed with error: latitude or longitude exce...
When you now add a vector or raster in a projected CRS and the project is in WGS84 (examples) with OTFR off QGIS thro... Giovanni Manghi
04:31 AM Bug report #4409 (Closed): Weird behaviour on Mac OS
Don't know if this is supposed to be so or I didn't set something correctly, but on my Mac OS (Snow Leopard), QGis 1.... Dejan Gambin
02:29 AM Bug report #4408 (Open): Validating *.qgs or *.qml against *.dtd
It's not possible to validate a QGIS project or style file against the called *.dtd (http://mrcc.com/qgis.dtd). Two r... Marco Lechner
02:16 AM Feature request #4407 (Open): Provide an entry for the magic(5) file
The magic file, usually /etc/magic for local entries on a debian-based system, is the file used to tell what kind of ... Sandro Santilli

2011-10-18

01:13 AM Feature request #4406 (Closed): WMS layer abstract not readable (single-line)
WMS layer abstracts aren't readable when longer than a few words. This is because the abstract is reported on a singl... Sandro Santilli
12:15 AM Feature request #4405: Updates to the field calculator context help
> This patch set adds help for recently implemented functions as well as translating some terms into English ;) or ju... Alister Hood
12:11 AM Feature request #4405 (Closed): Updates to the field calculator context help
This patch set adds help for recently implemented functions as well as translating some terms into English ;) or just... Alister Hood
12:11 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Oh, sorry, you said GDAL, not Proj. So maybe I need to rebuild Gdal.
Alister Hood
12:09 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Oh, OK. I had a look at crssync, but I didn't quite understand it, and when I saw the syncs in the git log I didn't ... Alister Hood
11:52 PM Bug report #4404 (Feedback): NZMG and other NZGD49 based CRSs are wrong
the srs.db is synced with GDAL on install (see crssync) - so if you're seeing bad definitions, they are probably from... Jürgen Fischer
07:18 PM Bug report #4404 (Closed): NZMG and other NZGD49 based CRSs are wrong
It seems that #3136 has been reverted by syncing srs.db with a faulty and unreleased (see http://trac.osgeo.org/proj/... Alister Hood
10:11 PM Feature request #4281: More user friendly handling of geometryless tables and layers loaded by a ...
> 2) It would probably be less confusing if the symbology tab was not shown for a geometryless table.
Also, the CRS ...
Alister Hood
04:24 PM Feature request #4403 (Closed): Attributes when using Dissolve on a polygon layer
Giovanni Manghi
04:24 PM Feature request #4403: Attributes when using Dissolve on a polygon layer
duplicate of #4382 Giovanni Manghi
02:50 PM Feature request #4403 (Closed): Attributes when using Dissolve on a polygon layer
In Qgis you can dissolve a polygon layer by the Geoprocessing tools.
But as far as I can see you can not control wh...
magerlin -
04:24 PM Feature request #4382: ftools: when using the DISSOLVE tool allow controlling how will result the...
see also #4403 Giovanni Manghi
12:41 PM Bug report #4399: Browser does not allow to tell which layer format to load
Thaddeus - wrote:
> Here is an idea, might not be a ... , but ... well .. anyway ..., here it goes: add an advanced-u...
Martin Dobias
08:49 AM Bug report #4399: Browser does not allow to tell which layer format to load
Using Tooltips is not a viable option for medium to large size projects, it's only good for one or two layers and occ... Thaddeus -
07:40 AM Bug report #4399: Browser does not allow to tell which layer format to load
I think this solution is optimal, as it follows the behaviour of the legend. Paolo Cavallini
06:05 AM Bug report #4399: Browser does not allow to tell which layer format to load
Would it be sufficient to show the extension (or the complete file name) as a tooltip? Originally we have been showin... Martin Dobias
03:34 AM Bug report #4399 (Closed): Browser does not allow to tell which layer format to load
In current trunk, layers are displayed without the file extension, and the user has no way to tell which format the f... Paolo Cavallini
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used
The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used
The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:10 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used
The QGIS overview is very bugged. The threading branch of QGIS seems to fix a few of the issues, this crashes in part... Giovanni Manghi
08:03 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used
Same for me on qGis 1.8.0-Trunk in Win7 environment.
I leave the crash info from the qgis.exe maybe can help:
Nome e...
Roberto Socin
07:56 AM Bug report #4402: QGIS crashes displaying overview if diagrams are used
Confirmed in Debian testing, qgis self packaged Paolo Cavallini
07:46 AM Bug report #4402 (Closed): QGIS crashes displaying overview if diagrams are used
Qgis crashes after the following steps:
- starting with a clean project I add a vector layer from file
- I add a dia...
Riccardo Mattiuzzo
06:13 AM Bug report #4401 (Closed): debian build - forgotten dependancy
dpkg-buildpackage doesn't check for "libspatialindex-dev" and "libspatialindex1" presence in system in the very begin... Darafei Praliaskouski
06:06 AM Bug report #4400 (Closed): QBrowser refresh removes PostGIS tables/layers.
* Load all PostGIS nodes in QBrowser down to show the layers.
* Click refresh
* Layer nodes will disappear until QGIS...
Nathan Woodrow

2011-10-17

01:00 AM Bug report #4398 (Closed): diagrams do not superpose
Apparently the diagrams are not allowed to superpose each other. When the size of the diagram (as defined in the "dia... alicebtoklas -
08:24 PM Feature request #4348: Add features like "creation options" and "no data" for all gdaltools
Just a note to myself or anyone else it helps:
Specifying the nodata value is particularly important for gdal_rasteri...
Alister Hood
01:04 PM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
erratum:
The attached examples can be opened in QGIS and saved back to SHP: comment-line header is 999.
Thaddeus -
01:02 PM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
Yes, I get the same here: Handle is a string representing a hex value, always starting at hex 20 or so and incrementi... Thaddeus -

2011-10-16

01:21 AM Feature request #4397 (Closed): (fTools) Check Geometry Validity - Save error messages as new poi...
It would be useful having the option to export the error messages of Check Geometry Validity into a new shapefile
or ...
Luca Sigfrido Percich
01:08 AM Bug report #4396 (Closed): (fTools) - Check geometry Validity raises exception clicking on errors...
Using the "Check Geometry Validity" in fTools, the user is presented a Dialog with the list of error messages and pos... Luca Sigfrido Percich
12:31 AM Bug report #4395 (Closed): Move raster commands under "Raster" menu
Zonal statistics, Interpolation and Geomorphology plugins should be moved under the Raster menu for consistency Paolo Cavallini
03:29 PM Bug report #2880 (Closed): makefiles not parallel building proof
As I mentioned before, I haven't seen that happen for quite some time with a high number of workers. Please re-open i... Volker Fröhlich
03:29 PM Bug report #2880 (Closed): makefiles not parallel building proof
As I mentioned before, I haven't seen that happen for quite some time with a high number of workers. Please re-open i... Volker Fröhlich
09:09 AM Bug report #4394: make clean fails to clean grass files
except find output -type f:
output/bin/source_path.txt
output/python/qgis/__init__.py
output/python/qgis/utils.py
out...
Sandro Santilli
09:08 AM Bug report #4394: make clean fails to clean grass files
I must have had a dirty source tree, after git-cleaning it make clean seems to leave no dangling objects in build dir. Sandro Santilli
08:41 AM Bug report #4394: make clean fails to clean grass files
For the record, there's more that fails to be cleaned:... Sandro Santilli
08:39 AM Bug report #4394 (Closed): make clean fails to clean grass files
Building GRASS support in QGIS is driving me nuts.
Part of the problem was "make clean" failing to clean built GRASS ...
Sandro Santilli
07:55 AM Bug report #4393 (Closed): Rasterlite layers on Windows as 0,0,0
The current trunk version on Windows does not seem to be able to display
Rasterlite layers, e.g.
http://download.gfos...
Paolo Cavallini
05:42 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice
duplicate of #3699 Jürgen Fischer
05:42 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice
duplicate of #3699 Jürgen Fischer
05:21 AM Bug report #4391 (Closed): GRASS plugin loading fails w/out notice
After successfully building GRASS support, I find no GRASS plugin in the plugin manager.
Manually exporting LD_LIBRAR...
Sandro Santilli
05:30 AM Bug report #4390: Could not find GRASS, vanilla GRASS install
Correct, GRASS>6.4.x is not supported Paolo Cavallini
04:46 AM Bug report #4390: Could not find GRASS, vanilla GRASS install
It still fails to find "vect" library. It seems it was renamed to "vector" in 7.0. Sandro Santilli
04:34 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install
Sandro Santilli wrote:
> symlinking grass install dir as /usr/local/grass doesn't help
Use GRASS_PREFIX. Not sure ...
Jürgen Fischer
04:34 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install
Sandro Santilli wrote:
> symlinking grass install dir as /usr/local/grass doesn't help
Use GRASS_PREFIX. Not sure ...
Jürgen Fischer
04:00 AM Bug report #4390: Could not find GRASS, vanilla GRASS install
symlinking grass install dir as /usr/local/grass doesn't help Sandro Santilli
03:58 AM Bug report #4390 (Closed): Could not find GRASS, vanilla GRASS install
I've just installed GRASS (svn trunk) and qgis cmake can't find it.
Won't be easy to find, as it's installed under /u...
Sandro Santilli
05:29 AM Bug report #4392 (Closed): GRASS-6.4.1: Incompatible library version for module.
This is what I get after a successful installation of GRASS 6.4.1 (last stable GRASS release):
Incompatible library ...
Sandro Santilli
02:48 AM Feature request #3483: Unified topological editing
See http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7521 for some ... Sandro Santilli
02:48 AM Feature request #3483: Unified topological editing
See http://strk.keybit.net/blog/2011/10/14/postgis-topology-iso-sqlmm-complete/comment-page-1/#comment-7521 for some ... Sandro Santilli

2011-10-15

08:26 PM Bug report #3977: Bogus missing CRS error
Whoops, just noticed the two SHPs have different coordinate systems. I regret that I do not remember which SHPs I was... Aren Cambre
08:24 PM Bug report #3977: Bogus missing CRS error
I've uploaded two SHPs to https://locker.smu.edu/xythoswfs/webui/_xy-1905192_1-t_VKORAv6z. One is a SHP of all school... Aren Cambre
06:26 AM Bug report #3977: Bogus missing CRS error
Aren Cambre wrote:
> It even happens if both layers have this CRS:
> > +proj=longlat +ellps=WGS84 +datum=WGS84 +no_de...
Giovanni Manghi
06:23 AM Bug report #3977 (Feedback): Bogus missing CRS error
I'm almost sure that ftools tools need to all the input vectors to be in the same CRS. Carson (the toolbox author), c... Giovanni Manghi
07:48 PM Bug report #4389 (Closed): Attribute table show and edit unselected record in edit form
Open attribute table for layer with some records.
Select one record (not first).
"show selected" option = enabled.
Tr...
Cyril Sobolev
05:10 PM Bug report #4388 (Closed): gdal raster provider does not use Offset and Scale raster properties
When QGis opens a GDAL raster with Offset and Scale properties, it does not recognize these values and the displayed ... Etienne Tourigny
01:11 PM Bug report #4096: Referenced layers do not use relative paths if set in project properties
This does happen inconsistently and unexpectedly. Here is an example: This shapefile should have no path as it is in ... Gavin Fleming
01:11 PM Bug report #4096: Referenced layers do not use relative paths if set in project properties
This does happen inconsistently and unexpectedly. Here is an example: This shapefile should have no path as it is in ... Gavin Fleming
12:58 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...
#2129 is the request to set WGS 84 automatically for GPX.
I often load GPX files into a map that has a UTM CRS and t...
Steven Mizuno
06:51 AM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...
Steven Mizuno wrote:
> As I understand the GPX standard all points are WGS 84, longitude/latitude in degrees.
> refe...
Giovanni Manghi
06:49 AM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...
As I understand the GPX standard all points are WGS 84, longitude/latitude in degrees.
refer to: http://www.topograf...
Steven Mizuno
11:07 AM Bug report #4222 (Feedback): Diagram overlays do not show in print composer
Jürgen Fischer
10:10 AM Bug report #4222: Diagram overlays do not show in print composer
Everything looks fine in the composer window but image/SVG output is not ok. Only some diagrams are contained in the ... Anita Graser
07:45 AM Bug report #4387 (Closed): New labelling: "add direction symbol" does not make sense for polygons...
or at least it does not have any effect. But as far as I understand it should be available only for lines. Giovanni Manghi
07:37 AM Bug report #4386 (Closed): ftools: raster layers are shown as possible input layers
see subject. In most of the tools this does not make sense. Giovanni Manghi
07:35 AM Bug report #4385 (Closed): Labelling window do not resize correctly
Noticed on both Ubuntu and Windows. See attached image. Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer
see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer
see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer
see also #3843 Giovanni Manghi
07:27 AM Feature request #3796 (Closed): Multiple labels per layer
see also #3843 Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:27 AM Feature request #3843: Rule based labeling
I agree that this is a important missing feature... now we have the rule based renderer is not hard to imagine how po... Giovanni Manghi
07:14 AM Bug report #2352: map is drawn twice on toggling a layer's visibility
merged with #2596 Giovanni Manghi
07:14 AM Bug report #2352: map is drawn twice on toggling a layer's visibility
merged with #2596 Giovanni Manghi
07:14 AM Bug report #2596: avoid useless canvas redraws
another useless redraw, see #2352 Giovanni Manghi
07:11 AM Feature request #4384 (Closed): ftools: expose an (geos) option in the qgis gui to do some snappi...
See #3126-15 and #3126-16
The case
#2806
#3126
merging polygons with "dirty" geometries (0 size areas, sliv...
Giovanni Manghi
06:55 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields
Martin Dobias wrote:
> What about just doing a concatenation of ATT1 with ATT2 in a new field and then using categori...
Giovanni Manghi
06:30 AM Feature request #4383 (Closed): ftools: Improve how processes are handled
See also #3810-6
The suggestion would be to improve them the same way as the gdal tools processes are handled: lau...
Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash
So closing this and opening a feature request one instead. Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash
So closing this and opening a feature request one instead. Giovanni Manghi
06:28 AM Feature request #3810 (Closed): Join attributes by location crash
So closing this and opening a feature request one instead. Giovanni Manghi
06:24 AM Feature request #3628: Densify features
Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features
Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features
Please consider supporting the development of such tool. Giovanni Manghi
06:24 AM Feature request #3628: Densify features
Please consider supporting the development of such tool. Giovanni Manghi
06:00 AM Bug report #2733: fTools Add geometry column fails to add XCOORD if source is GPX file or PostGIS...
Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ...
Giovanni Manghi
06:00 AM Bug report #2733: fTools Add geometry column fails to add XCOORD if source is GPX file or PostGIS...
Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ...
Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...
Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ...
Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...
Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ...
Giovanni Manghi
05:35 AM Bug report #2733 (Feedback): fTools Add geometry column fails to add XCOORD if source is GPX file...
Horst Düster wrote:
> I found the same behaviour with [[PostGIS]] layers as well. The bug depends on the position of ...
Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?
I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?
I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:51 AM Bug report #4125 (Feedback): Multilinestring -> linestring failure?
I have just tested and the result is a linestring for me (checked also with PostGIS). Please check and leave feedback. Giovanni Manghi
04:25 AM Bug report #2806 (Closed): ftools.dissolve and geoprocessing.dissolve "loose" polygons
Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons
The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons
The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons
The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons
The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
04:13 AM Bug report #2806: ftools.dissolve and geoprocessing.dissolve "loose" polygons
The vector is in much bad conditions than it seem just looking at it (and the QGIS "check geometry" tool basically lo... Giovanni Manghi
03:14 AM Bug report #4261 (Feedback): "Merge shapefiles to one" gives bad results
Please leave feedback and sample data to allow the dev to make further tests. Giovanni Manghi
03:12 AM Feature request #4382 (Closed): ftools: when using the DISSOLVE tool allow controlling how will r...
This is already possible for example with the "merge selected features" tool in the "advanced digitizing" toolbar. Giovanni Manghi
02:58 AM Bug report #4105 (Feedback): "Select by location" does not work with layers having different CRS ...
Giovanni Manghi
02:58 AM Bug report #4105: "Select by location" does not work with layers having different CRS and "on the...
I think it is safe to say that ftools tools (the vector menu) works only if the input layers are in the same CRS. Car... Giovanni Manghi

2011-10-14

05:11 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...
Steven Mizuno wrote:
> GPX files should always be in WGS 84 (epsg:4326) so there is no reason for the user to set the...
Giovanni Manghi
04:49 PM Bug report #4376: QGIS doesn't ask for the CRS when loading GPX files, but it does when loading C...
GPX files should always be in WGS 84 (epsg:4326) so there is no reason for the user to set the CRS (and QGIS shouldn'... Steven Mizuno
08:42 AM Bug report #4376 (Closed): QGIS doesn't ask for the CRS when loading GPX files, but it does when ...
If in "Options -> CRS -> coordinate reference system for new layers" a user set "prompt for CRS", then QGIS will ask ... Giovanni Manghi
05:10 PM Bug report #4375: Zoom to layer extent does not work for a point layer with a single point.
Also occurs on two (or more) points having the same x- or y-coordinate, or a line that is exactly vertical or horizon... Steven Mizuno
05:04 PM Bug report #4381 (Closed): Saving a shape as DXF ("save as...") leads to corrupted files
During a training course I have been pointed that almost any vector saved as dxf in QGIS (using "save as..."), does n... Giovanni Manghi
02:04 PM Feature request #4378: Allow categorized symbology with (up to) 3 fields
What about just doing a concatenation of ATT1 with ATT2 in a new field and then using categorized symbol renderer on ... Martin Dobias
08:59 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields
Martin Dobias wrote:
> Maybe using field calculator would be a better solution rather than adding such functionality ...
Giovanni Manghi
08:55 AM Feature request #4378: Allow categorized symbology with (up to) 3 fields
Maybe using field calculator would be a better solution rather than adding such functionality directly to categorized... Martin Dobias
08:51 AM Feature request #4378 (Closed): Allow categorized symbology with (up to) 3 fields
Imagine to have two attributes ATT1 and ATT2, with the following values
ATT1 | ATT2
A | C
B | D
then making the ca...
Giovanni Manghi
01:34 PM Bug report #4380 (Closed): geojson data not displayed when first feature geometry is null
I had a data set in geojson format where the geometry of the first feature is null. Apparently, this bothers QGIS at ... Claude Paroz
09:10 AM Bug report #4379 (Closed): if "Options -> CRS -> coordinate reference system for new layers" is s...
See subject -> asking for CRS for a new shapefile layer does not make sense, also because in the following dialog it ... Giovanni Manghi
08:45 AM Bug report #4377 (Closed): if "Options -> CRS -> coordinate reference system for new layers" is s...
See subject -> asking for CRS for a map that need to be georeferenced it doesn't make any sense. Giovanni Manghi
07:05 AM Bug report #4372 (Closed): QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS
Martin Dobias
07:05 AM Bug report #4372: QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS
fixed in commit:30a676678 Martin Dobias

2011-10-13

10:43 PM Bug report #4375 (Closed): Zoom to layer extent does not work for a point layer with a single point.
Just what the title says.
It does not matter whether or not on-the-fly projection is enabled.
But note that "Zoom fu...
Alister Hood
12:50 PM Feature request #4374 (Open): Support keyword substitution in provider queries
When fetching features from a query it would be useful to allow using keywords to be substituted on each fetching.
Su...
Sandro Santilli
08:53 AM Feature request #4373 (Closed): Merge from Template, a new feature for Composer.
The current (QGIS1.7.1) "Load from Template" wipes out all existing composer objects before importing from the templa... Thaddeus -
06:43 AM Bug report #4191: Raster clipper does not work with a shp mask
Hi Giuseppe,
I have just tested it in QGIS 1.7.1-Wroclaw Wroclaw, e6718b6 (bundled with GDAL/OGR 1.8.1) installed on ...
Andrea Borruso

2011-10-12

01:04 AM Bug report #4308 (Resolved): Interpolation and Terrain core plugins: do not add custom names?
Fixed in f8ed801daee4ff5dfc97c7254eecd34bc7fb1182 Marco Hugentobler
02:26 AM Bug report #4372 (Closed): QBrowser dock refresh doesn't refresh root nodes for PostGIS, WMS, WFS
* Open QGIS with no connections added for PostGIS, WMS or WFS.
* Create connection using normal dialog.
* Press refre...
Nathan Woodrow
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor
This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo...
alobo -
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor
This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo...
alobo -
02:08 AM Feature request #1826: Keyboard shortcut for moving the cursor
This feature is implemented with the arrow.
Could be closed, but actually the jump is too large.
Perhaps an option fo...
alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming
Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n...
alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming
Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n...
alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming
Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n...
alobo -
02:02 AM Feature request #1825 (Closed): Re-center to current cursor postion at zooming
Re-centering after zooming in works fine on 1.7.1 ubuntu binaries from ubunutgis-unstable
Please re-open if this is n...
alobo -

2011-10-11

01:24 AM Feature request #4160: Enhancements to multiband raster styling to make it more user friendly / c...
Also,
1. when the user selects standard deviation, the corresponding min-max values
should be displayed in the boxes...
alobo -
11:19 PM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10
ArcGIS does not allow to choose encoding. For UTF-8 support in shapefiles, several requirements must be met:
1. Regis...
vvj -
07:36 PM Bug report #3326: Symbolization - Applying/OK new symbol qualities
Glad to hear this was fixed for most people, however no change at my end.
When I finally was able to build from Tr...
Mars Sjoden
03:52 PM Feature request #4365 (Closed): Add log/ln functions to the field calculator
Martin Dobias
03:52 PM Feature request #4365: Add log/ln functions to the field calculator
Added in commit:0591288
* exponential exp(x)
* natural logarithm ln(x)
* common logarithm log10(x)
* logarithm with...
Martin Dobias
03:11 PM Bug report #4371 (Closed): Identify tool does not work with reprojected WMS layers
I just noticed the following with qgis-trunk under both Linux and Windows:
The identify tool does return always
_Ge...
Giovanni Manghi
02:00 PM Feature request #4164 (Closed): File browser: please add support for WFS
Added in commit:4dc4552 Martin Dobias
02:00 PM Feature request #4164 (Closed): File browser: please add support for WFS
Added in commit:4dc4552 Martin Dobias
11:38 AM Bug report #3963: Crash when applying a graduated vector style
I am unable to tell what is going on in the algorithm for natural breaks, the references lead only to implementations... Martin Dobias
11:30 AM Bug report #4272 (Closed): Data browser does not refresh without restarting QGIS
Added in commit:de9fb2ce Martin Dobias
11:30 AM Bug report #4272 (Closed): Data browser does not refresh without restarting QGIS
Added in commit:de9fb2ce Martin Dobias

2011-10-10

01:41 AM Bug report #4370 (Closed): Can not start QGIS
Hello
I got a problem with a DLL (libeay32.dll) and the search order for DLLs.
A Program called "CrystalReport Viewe...
Daniel Rohde
01:08 AM Bug report #2352: map is drawn twice on toggling a layer's visibility
Seems like a duplicate of #2596 Sandro Santilli
01:05 AM Bug report #4253: Fix "value tool" issue with GRASS rasters (and make the plugin) core
looks like being assigned... Sandro Santilli
12:14 AM Bug report #3762 (Open): "Cancel" does not revert a change between new and old symbology
Jürgen Fischer
08:49 AM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.
I am able to replicate this with all versions of QGIS on Macintosh 64bit 10.5 to 10.6.x
Applying symbol change hard...
Mars Sjoden

2011-10-09

01:35 AM Bug report #4207 (Closed): Embedded layers are not italic after project load
Marco Hugentobler
01:32 AM Bug report #4351: "Select Attributes" dialog in Print Composer needs Scrollbar
There is a scrollbar for me, both with 1_7_1 and master (see attached screenshot).
What is your QGIS version and oper...
Marco Hugentobler
01:11 AM Bug report #4352 (Closed): Point Displacement Render: Invalid Offset when only one geometry
Fixed in 0e99d431c03b55b60dffaa5a3b8d30ca82bdd465 Marco Hugentobler
05:10 PM Bug report #4139 (Closed): Possible memory leak with raster layers
After some investigation it seems that GDAL has a cache option for the ecw driver (http://www.gdal.org/frmt_ecw.html)... Nathan Woodrow
05:10 PM Bug report #4139 (Closed): Possible memory leak with raster layers
After some investigation it seems that GDAL has a cache option for the ecw driver (http://www.gdal.org/frmt_ecw.html)... Nathan Woodrow
04:36 AM Bug report #3790: OTF Raster Reprojection artifacts (at some scales)
> I did manage however to create some errors and "screen" artifacts as seen on screenshots --artifacts created by usi... Giovanni Manghi
03:07 AM Feature request #4367 (Closed): Include i.landsat toar & i.landsat.acca in Grass Plugin for QGIS
Hi, the modules you requested are both listed as GRASS addons
http://grass.osgeo.org/wiki/GRASS_AddOns
so it is not...
Giovanni Manghi
03:07 AM Feature request #4367 (Closed): Include i.landsat toar & i.landsat.acca in Grass Plugin for QGIS
Hi, the modules you requested are both listed as GRASS addons
http://grass.osgeo.org/wiki/GRASS_AddOns
so it is not...
Giovanni Manghi

2011-10-08

01:13 AM Bug report #4368 (Rejected): Union tool creates shapefile with missing polygons
Duplicate of #3581. Please check carefully before opening a ticket Paolo Cavallini
01:13 AM Bug report #4368 (Rejected): Union tool creates shapefile with missing polygons
Duplicate of #3581. Please check carefully before opening a ticket Paolo Cavallini
01:40 PM Bug report #4368 (Closed): Union tool creates shapefile with missing polygons
When unioning shapefiles in QGIS, the process gets to about 6% and finishes, leaving a layer that is unioned correctl... Andrew Joseph
08:44 AM Bug report #3790: OTF Raster Reprojection artifacts (at some scales)
I fotgot to mention the strange no data data value (-340282346638528859811704183484516925440.000000) on the *.ADF fil... Thaddeus -
03:05 AM Bug report #4111: Build with current external spatialindex lib
Tim Sutton wrote:
> I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes ...
Jürgen Fischer
03:04 AM Bug report #4111: Build with current external spatialindex lib
volter - wrote:
> The question was actually meant as a joke.
careful, bad things can happen with 10€ ;) http://www....
Jürgen Fischer
03:02 AM Feature request #4367 (Closed): Include i.landsat toar & i.landsat.acca in Grass Plugin for QGIS
This request comes from my own interest in the use of Landsat imagery, and my belief that Landsat would be of greater... Bill Williamson

2011-10-07

12:09 AM Bug report #4157: Empty map composer on reopen project
Giovanni, I was the one opening this ticket for the first time in the old tracker. I don't know what exactly was caus... Goyo D
07:49 PM Bug report #3790: OTF Raster Reprojection artifacts (at some scales)
I tried real hard to upset QGIS selecting all kind of reprojections and color map settings, but it did pretty good: I... Thaddeus -
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales)
This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales)
This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales)
This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
11:16 AM Bug report #3790 (Feedback): OTF Raster Reprojection artifacts (at some scales)
This issue seems gone. Tested on both Windows and Linux using trunk. Please leave feedback. Giovanni Manghi
07:30 PM Bug report #4158 (Closed): Zoom to layer extent does not take into account labels
Nathan Woodrow
07:27 PM Bug report #4158: Zoom to layer extent does not take into account labels
Yeah, I kind of figured that was the case. And, now that I think about it, I'm not even sure that would be desirable ... mattwigway .
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels
Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels
Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
05:22 AM Bug report #4158 (Feedback): Zoom to layer extent does not take into account labels
Extent is computed using geometries bounding boxes, I can't see how labels (both old or new ones) can be taken into a... Giovanni Manghi
02:33 PM Bug report #4111 (Fixed for bounty): Build with current external spatialindex lib
Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib
Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err...
Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib
Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err...
Tim Sutton
02:32 PM Bug report #4111: Build with current external spatialindex lib
Hi
I've applied your patch excluding the namespace changes in commit:356c87b. The namespace changes caused build err...
Tim Sutton
12:19 PM Bug report #4141 (Closed): Problem installing plugins
duplicate of #4303 Giovanni Manghi
12:19 PM Bug report #4141 (Closed): Problem installing plugins
duplicate of #4303 Giovanni Manghi
12:16 PM Bug report #4140 (Feedback): projection problem with QGIS 1.7 "--snapshot"
I can't understand where is the issue with projections. Seems to me that is just a matter of extent/scale difference ... Giovanni Manghi
12:12 PM Bug report #3466: Extremely Bloated PDF Vector Export under Win.
Yes please, check with qgis 1.7.1 or trunk and report back.
I will attach here the result of exporting your project ...
Giovanni Manghi
12:12 PM Bug report #3466: Extremely Bloated PDF Vector Export under Win.
Yes please, check with qgis 1.7.1 or trunk and report back.
I will attach here the result of exporting your project ...
Giovanni Manghi
11:58 AM Bug report #4335: Raster legend: no values are shown for GRASS rasters
see also #1051 Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:58 AM Bug report #1051: GRASS rasters values/labels are not shown in legend/colormap tab
It is a while that we have raster legends in the QGIS TOC.
When loading a (non GRASS) raster the legend in the TOC, ...
Giovanni Manghi
11:44 AM Feature request #4357: On/Off checkbox for Composer Objects
Oops, I was really focused on the paper space, the Composer, but I never qualified that "label" word with Composer la... Thaddeus -
11:02 AM Feature request #4357: On/Off checkbox for Composer Objects
Seems to me that this ticket explain very well a situation that could be solved the way is suggested (a checkbox for ... Giovanni Manghi
11:02 AM Feature request #4357: On/Off checkbox for Composer Objects
Seems to me that this ticket explain very well a situation that could be solved the way is suggested (a checkbox for ... Giovanni Manghi
11:16 AM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.
I was unable to replicate this: tried this under Win2k and QGIS 1.7.1. Thaddeus -
10:00 AM Bug report #4293 (Feedback): QGIS crashes when applying Graduated Symbol symbology.
Eduardo Bieñkowski wrote:
> Run QGIS 1.7 on Win XP, got the same problem.
> It ran on another machine with ubuntu 32 ...
Giovanni Manghi
10:14 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
see also #4364
Moreover:
when adding a class in the "categorized" symbology it is always added as last (as already...
Giovanni Manghi
10:13 AM Feature request #4364 (Closed): Symbology classes reordering
see also #4334 Giovanni Manghi
10:13 AM Feature request #4364 (Closed): Symbology classes reordering
see also #4334 Giovanni Manghi
05:31 AM Feature request #4364 (Closed): Symbology classes reordering
Hi,
I just faced following problem (QGIS 1.7, Windows) - I created a nice symbology for my point layer. Finally, I fo...
Jhelebrant -
09:34 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious
Please reopen if I understand wrong the issues:
in QGIS trunk you can now select multiple symbology classes, right c...
Giovanni Manghi
09:34 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious
Please reopen if I understand wrong the issues:
in QGIS trunk you can now select multiple symbology classes, right c...
Giovanni Manghi
09:21 AM Bug report #4366 (Closed): Outline width and transparency changes: tedious
I noticed this issue a few months ago and it has niggled me a few times since then.
It's only now that I've used ArcM...
Robin Lovelace
09:34 AM Bug report #3275: Allow change ALL symbol properties when selecting multiple classes (in new symb...
see also #4366 Giovanni Manghi
08:44 AM Feature request #4365 (Closed): Add log/ln functions to the field calculator
Subject says it all Giovanni Manghi
08:34 AM Feature request #4358: Implement an item "tree" for composers
A simple Listbox/Dropdown Listbox listing all the objects for selection would do: it better than editing the zValue m... Thaddeus -
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers
New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers
New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers
New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:41 AM Feature request #4358 (Open): Implement an item "tree" for composers
New description: I would say one way to handle this would be to have a tree list like in Qt Designer that shows you t... Giovanni Manghi
07:22 AM Feature request #4358: Implement an item "tree" for composers
I would say one way to handle this would be to have a tree list like in Qt Designer that shows you the controls that ... Nathan Woodrow
02:58 AM Feature request #4358 (Closed): Implement an item "tree" for composers
It is a "classical" way handle objects, the one used by powerpoint/impress for example. I can't see here a bug nor a ... Giovanni Manghi
02:58 AM Feature request #4358 (Closed): Implement an item "tree" for composers
It is a "classical" way handle objects, the one used by powerpoint/impress for example. I can't see here a bug nor a ... Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool
I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne...
Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool
I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne...
Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool
I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne...
Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool
I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne...
Giovanni Manghi
05:17 AM Bug report #3802: QGIS crashes using some options of new labelling tool
I tested qgis-trunk on both Ubuntu Linux and Windows 7 and the issue it seems to be a Windows only one.
It is not ne...
Giovanni Manghi
03:35 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry
Overwrite @feat@ with a new feature invalidate the geometry reference. You need to copy the geometry. But the retri... Jürgen Fischer
03:35 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry
Overwrite @feat@ with a new feature invalidate the geometry reference. You need to copy the geometry. But the retri... Jürgen Fischer
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi
03:03 AM Bug report #2951 (Closed): Layers become non-editable
Alister Hood wrote:
> Should we close this as invalid again?
> I don't see anything that is awaiting feedback.
I gue...
Giovanni Manghi

2011-10-06

01:36 AM Bug report #4363 (Closed): Problem with setGeometry() when overwrite geometry
Objective is simple, i want to change the geometry of point 1 by copying the geometry of point 2 into geometry of poi... sebastien rey
10:46 PM Feature request #4362 (Closed): File dialogues should recognise VRT files with .ovf and .ovr exte...
I think it is kind of conventional for VRT files to have the extension .ovf if they are for vector data, and .ovr if ... Alister Hood
10:10 PM Bug report #4361: Edit button is not updated when provider query makes a layer read-only
example vrt Alister Hood
10:10 PM Bug report #4361: Edit button is not updated when provider query makes a layer read-only
example vrt Alister Hood
10:08 PM Bug report #4361 (Closed): Edit button is not updated when provider query makes a layer read-only
Quoting from a mention in #3052:
As soon as you place a query on a shapefile, it's capabilities drop from 975 to 704,...
Alister Hood
08:17 PM Bug report #2951: Layers become non-editable
Should we close this as invalid again?
I don't see anything that is awaiting feedback.
Alister Hood
08:17 PM Bug report #2951: Layers become non-editable
Should we close this as invalid again?
I don't see anything that is awaiting feedback.
Alister Hood
04:44 PM Feature request #3041 (Closed): Make the GdalTools command window editable
Paolo Cavallini wrote:
> making major changes to the existing plugin is essentially a waste of time
Without the sync...
Giuseppe Sucameli
04:44 PM Feature request #3041 (Closed): Make the GdalTools command window editable
Paolo Cavallini wrote:
> making major changes to the existing plugin is essentially a waste of time
Without the sync...
Giuseppe Sucameli
02:16 PM Bug report #4111: Build with current external spatialindex lib
The question was actually meant as a joke. Volker Fröhlich
01:01 PM Feature request #4358 (Closed): Implement an item "tree" for composers
I was trying to hide from printing/exporting a label by sending it to back, but now I cannot figure out how to bring ... Thaddeus -
12:59 PM Feature request #4357 (Closed): On/Off checkbox for Composer Objects
There are cases where I do not want to print/export some labels -- call it a special printout version --, so I delete... Thaddeus -
09:14 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...
Hi Giovanni, sorry about the confusion: all the notes and comments on the QGIS canvas screenshot were mainly taking n... Thaddeus -
05:26 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...

> * The folloowing feature request make sense and I will open a proper ticket for it: "_How can I tell which of the ...
Giovanni Manghi
05:05 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...
Hi Thaddeus, I can confirm the issue. Nevertheless I found not very handy to have many notes/feature_requests/describ... Giovanni Manghi
09:07 AM Bug report #3028: Displacement between vector and WMS layers after printing
Just made a quick check on QGIS 1.7.1 and it works great: no displacement anymore and I the SHP is rendered as PS str... Thaddeus -
09:04 AM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...
Steps to reproduce:
1. Get a layer with lots of features (mine had 900).
2. Turn on editing.
3. Select many features ...
mattwigway .
09:01 AM Feature request #4353 (Closed): Show raster bands being used in the TOC
duplicate of #4144 Giovanni Manghi
09:01 AM Feature request #4353 (Closed): Show raster bands being used in the TOC
duplicate of #4144 Giovanni Manghi
05:25 AM Feature request #4353 (Closed): Show raster bands being used in the TOC
This feature request was made originally by Thaddeus in ticket #4138
When working with multiband rasters the only pl...
Giovanni Manghi
09:01 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.
see also #4353 Giovanni Manghi
09:01 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.
see also #4353 Giovanni Manghi
08:58 AM Feature request #4144: New Feature: show Raster Band number on Layer Panel entries.
Well, I'm just saying that having the information on more than one place is a good thing: being able to copy that (as... Thaddeus -
08:34 AM Bug report #3466: Extremely Bloated PDF Vector Export under Win.
This was a while ago: I'll recheck on this using the 1.7.7 later. This is using the QGIS' "Export as PDF" functionali... Thaddeus -
08:21 AM Bug report #4157 (Closed): Empty map composer on reopen project
This was somehow already fixed.
I've tested it on qgis-trunk and it behaves as expected. If closing a saved project ...
Giovanni Manghi
08:21 AM Bug report #4157 (Closed): Empty map composer on reopen project
This was somehow already fixed.
I've tested it on qgis-trunk and it behaves as expected. If closing a saved project ...
Giovanni Manghi
03:37 AM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.
Thaddeus - wrote:
> Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 in...
Giovanni Manghi
03:37 AM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.
Thaddeus - wrote:
> Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 in...
Giovanni Manghi
03:15 AM Bug report #2596: avoid useless canvas redraws
another useless redraw:
when the identify window is set to be opened docked but it is not (yet) visible: picking the...
Giovanni Manghi
03:05 AM Bug report #4302 (Closed): Can't use 'Geostationary Satellite View' projection
Steven Mizuno wrote:
> So far as I can tell there isn't anything in QGIS to fix.
Then Ricardo please file this ticke...
Giovanni Manghi
03:05 AM Bug report #4302 (Closed): Can't use 'Geostationary Satellite View' projection
Steven Mizuno wrote:
> So far as I can tell there isn't anything in QGIS to fix.
Then Ricardo please file this ticke...
Giovanni Manghi
03:03 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10
I'm not really sure this is a QGIS issue... Giovanni Manghi
02:23 AM Bug report #4328 (Closed): Fix for python output directory not being correctly created for Win32
Ignore this pull request. I have subsequently cleaned my build environment and started a fresh build and this issue n... Jeremy Palmer
02:23 AM Bug report #4328 (Closed): Fix for python output directory not being correctly created for Win32
Ignore this pull request. I have subsequently cleaned my build environment and started a fresh build and this issue n... Jeremy Palmer

2011-10-05

01:01 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10
Arcgis does not allow the user to choose the enconding when opening a vector, as QGIS does? Giovanni Manghi
01:01 AM Bug report #4343: Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10
Arcgis does not allow the user to choose the enconding when opening a vector, as QGIS does? Giovanni Manghi
10:26 PM Feature request #3041: Make the GdalTools command window editable
IMO it is better to move the plugin to the new analytical infrastructure, so making major changes to the existing plu... Paolo Cavallini
03:55 PM Feature request #3041: Make the GdalTools command window editable
> It seems to have understand that one major problem would be maintain the GUI in sync with the command windows.
If ...
Alister Hood
02:44 PM Feature request #3041: Make the GdalTools command window editable
no popups please, they are a pain in the butt. I think just disabling all the controls would be the better way to go... Nathan Woodrow
01:08 PM Feature request #3041: Make the GdalTools command window editable
It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
01:08 PM Feature request #3041: Make the GdalTools command window editable
It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
01:08 PM Feature request #3041: Make the GdalTools command window editable
It seems to have understand that one major problem would be maintain the GUI in sync with the command windows. From a... Giovanni Manghi
10:20 PM Bug report #4352 (Closed): Point Displacement Render: Invalid Offset when only one geometry
When using the point displacement rendering plugin it seems that in the case where is only one geometry (no collision... Andreas Neumann
09:40 AM Bug report #4351 (Closed): "Select Attributes" dialog in Print Composer needs Scrollbar
the "Select Attributes" dialog when adding an Attribute Table in Print Composer can grow too long for the screen. The... Anita Graser
08:40 AM Bug report #4350 (Closed): Handle HTML content in RSS feed for OpenSearch results
QGIS should be able to display RSS feeds properly for WMS searches. The release notes for QGIS 1.5 state that QGIS sh... Augustus Kling
03:52 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.
Duplicate #3041 Alexander Bruy
03:52 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.
Duplicate #3041 Alexander Bruy
02:54 AM Feature request #4349 (Closed): Enable a user to edit the gdaltools commands.
The dialogues for each gdaltool display the command to be run at the bottom.
It would be good if it was possible to ...
Alister Hood
03:02 AM Bug report #1380: No Data values are counted as values in the histogram
Nodata values are also counted when using the "load min/max values from band" feature on the "Style" tab.
This w...
Alister Hood
02:40 AM Feature request #4348 (Closed): Add features like "creation options" and "no data" for all gdaltools
The dialogues for some of the raster tools (e.g. translate) have options for important things like specifying a nodat... Alister Hood

2011-10-04

11:16 PM Bug report #4347 (Closed): raster and vector rendering mismatched by 1 pixel at some zoom levels
I'm not 100% sure if this counts as a bug:
Depending on the zoom level, a raster image and a vector with the same ex...
Alister Hood
10:40 PM Feature request #4346 (Closed): startup tip suggestion
It might be good to have a startup tip explaining about VRT files.
I can't think of a good concise text at the moment...
Alister Hood
10:08 PM Bug report #2491: Raster transparency doesn't handle alpha channel
I remember some conjecture on the mailing list that this is simply a new feature which hasn't been implemented yet.
...
Alister Hood
09:46 PM Feature request #4160: Enhancements to multiband raster styling to make it more user friendly / c...
Something else, although it would probably be covered by your gui redesign:
Everything in the colormap tab is grayed ...
Alister Hood

2011-10-03

06:23 PM Bug report #4302: Can't use 'Geostationary Satellite View' projection
So far as I can tell there isn't anything in QGIS to fix. Steven Mizuno
08:07 AM Bug report #4302: Can't use 'Geostationary Satellite View' projection
Hi, so this means that is not a QGIS issue, right?
Steven Mizuno wrote:
> More information -
>
> I looked more clos...
Giovanni Manghi
07:42 AM Bug report #4302: Can't use 'Geostationary Satellite View' projection
More information -
I looked more closely at how the MGRS 6x8 degree data was displayed and found that there were mis...
Steven Mizuno
02:09 PM Feature request #4274 (Closed): Data browser, horizontal scrollbar
Added in commit:3f70d32 Martin Dobias
02:09 PM Feature request #4274 (Closed): Data browser, horizontal scrollbar
Added in commit:3f70d32 Martin Dobias
01:56 PM Bug report #4309 (Closed): File browser: loaded layers do not behave the same way as those loaded...
Should be fixed in commit:3350c9c and commit:6999c89 - at least with shapefiles. Some files that OGR loads actually m... Martin Dobias
01:56 PM Bug report #4309 (Closed): File browser: loaded layers do not behave the same way as those loaded...
Should be fixed in commit:3350c9c and commit:6999c89 - at least with shapefiles. Some files that OGR loads actually m... Martin Dobias
12:30 PM Bug report #4241 (Closed): QGIS crash when zooming vector layer Postgresql with new line style
Should be fixed in commit:5677103. Martin Dobias
12:30 PM Bug report #4241 (Closed): QGIS crash when zooming vector layer Postgresql with new line style
Should be fixed in commit:5677103. Martin Dobias
08:40 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
It took me a while to find this reference. No, it's not a plugin: see these two bug and feature reports.
Bug #41...
Thaddeus -
08:06 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
Thaddeus - wrote:
> I really need the feature that lets me identify the Band I'm plotting (1.6) and that was not inc...
Giovanni Manghi
08:03 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
Well, confirmed, it does crash on Win2k, but I must confess I got QGIS 1.5, 1.6, 1.7 and 1.7.1 installed on the same ... Thaddeus -
04:12 AM Feature request #4332: Add an option "set project CRS from first loaded layer"
> The #4333 "issue" is not an issue at all: the CRSs (coordinate reference system, the acronym makes perfectly sense,... Jonathan Moules
03:56 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer"
Borys Jurgiel wrote:
> See also #2093. Probably we can close this one as a duplicate now.
agree, duplicate of #2093....
Giovanni Manghi
03:56 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer"
Borys Jurgiel wrote:
> See also #2093. Probably we can close this one as a duplicate now.
agree, duplicate of #2093....
Giovanni Manghi
03:53 AM Feature request #4332: Add an option "set project CRS from first loaded layer"
See also #2093. Probably we can close this one as a duplicate now. Borys Jurgiel
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
02:45 AM Feature request #4332 (Open): Add an option "set project CRS from first loaded layer"

> It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection...
Giovanni Manghi
04:04 AM Bug report #4345 (Closed): Pie-chart diagrams are irregularly displaced (?) in map composition ou...
When extracting a map composition using pie-chart diagrams (in all types of output, image, PDF or SVG) the 'pies' are... Nikos Tzelepis
03:52 AM Feature request #2093: Provide configuration options for new project (map) CRS and OTFR
See also #4333 - also add a "set CRS from first laded layer" option. It could be either another radio button in the g... Borys Jurgiel
03:36 AM Bug report #4216: error editing dbf over ssh / sftp
I don't have problem editing the file locally
I'm not sure how i mount the filesystem. I use the "connect to server"...
Francisco Puga
02:39 AM Bug report #4344 (Closed): Debian packaging is broken
already fixed in commit:cb3ba889 Jürgen Fischer
02:39 AM Bug report #4344 (Closed): Debian packaging is broken
already fixed in commit:cb3ba889 Jürgen Fischer
02:26 AM Bug report #4344 (Closed): Debian packaging is broken
When I try to build QGis debian packages with debug enabled, dh_shlibdeps fails with message:... jekhor -
02:23 AM Feature request #4330: Spatial Indexing of Shapefiles on first load
Jonathan Moules wrote:
> Ah, it depends what you mean. I actually encountered this by loading a shapefile with ~3mill...
Giovanni Manghi
02:05 AM Feature request #4330: Spatial Indexing of Shapefiles on first load
Ah, it depends what you mean. I actually encountered this by loading a shapefile with ~3million line features so I ca... Jonathan Moules

2011-10-02

01:56 AM Feature request #4332: Add an option "set project CRS from first loaded layer"
It may be more flexible, but I think it's significantly less user friendly. This combined with my other projection ti... Jonathan Moules
05:29 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer"
QGIS is more flexible: you can set the behavior for new projects CRSs and layers without a explicit CRS in the QGIS g... Giovanni Manghi
05:29 AM Feature request #4332 (Closed): Add an option "set project CRS from first loaded layer"
QGIS is more flexible: you can set the behavior for new projects CRSs and layers without a explicit CRS in the QGIS g... Giovanni Manghi
01:41 AM Bug report #4343 (Closed): Shapefile, created in Qgis, encoding not recognized by Esri ArcGIS 10
Hello,
I have created shapefile with UTF-8 attribute values. In QuantumGIS 1.7.1 they are displayed correctly, but i...
vvj -
07:08 PM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
Yeah, I just tried another PC with XP and Ubuntu and could not replicate either: I'm going to try angain tomorrow on ... Thaddeus -
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...
The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th...
Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...
The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th...
Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...
The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th...
Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...
The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th...
Giovanni Manghi
12:01 PM Feature request #4299: Change TOC symbology classes order according to order in the "style" tab o...
The first par is duplicate of #4334.
I'll change the subject to reflect the feature request in the second part od th...
Giovanni Manghi
11:57 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
see also #4299 Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
06:30 AM Bug report #4334: Symbology classes order lost PLUS wrong order after editing a label
I can confirm the issues on trunk/Linux. Moreover ordering by "value" orders always as text, even if the column used ... Giovanni Manghi
11:53 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...
see also #4296 Giovanni Manghi
11:46 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...
Seems to me is not listed as a plugin. Giovanni Manghi
11:46 AM Bug report #4309: File browser: loaded layers do not behave the same way as those loaded through ...
Seems to me is not listed as a plugin. Giovanni Manghi
11:53 AM Bug report #4296 (Closed): Loading files through Browser does not load style
duplicate of #4309 Giovanni Manghi
11:53 AM Bug report #4296 (Closed): Loading files through Browser does not load style
duplicate of #4309 Giovanni Manghi
11:12 AM Feature request #4330: Spatial Indexing of Shapefiles on first load
I'm not sure this issue (of slow vector loading) goes away by creating spatial indexes, from my tests it doesn't.
Th...
Giovanni Manghi
06:22 AM Bug report #4300: Zoom to Layer Extent does not work after extent of underlying PostGIS view changes
I can confirm the issue on QGIS trunk and PostgreSQL 8.4/PostGIS 1.5 installed on Linux. Giovanni Manghi
05:53 AM Bug report #4238: Geoserver WFS-T throws error when using QGIS Cut Spatial Objects tool
The error message comes from Geoserver, not QGIS, as it is clearly a JAVA error message.
In any case if you can't pr...
Giovanni Manghi
05:49 AM Feature request #4327: UNC SVG paths instead of browse for folder
Jürgen Fischer wrote:
> not reproducable here - the browse dialog also includes "Network Neighbourhood", so you can b...
Giovanni Manghi
05:47 AM Bug report #4221: Cannot add values to new column in attribute table in same session
Anita Graser wrote:
> I cannot reproduce this problem using 1.7.0 on Win7.
I cannot replicate either on Linux and QG...
Giovanni Manghi
05:40 AM Bug report #3667: When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0 QGIS crashes
Jürgen Fischer wrote:
> doesn't happen in trunk. Can you check again please?
I confirm it doesn't crash with QGIS t...
Giovanni Manghi
05:25 AM Bug report #2081: Old Symbology: different rotation of symbol and label
are we sure we want to keep open tickets on old symbology and old labelling? Both will be removed in QGIS 2.x, AFAIK Giovanni Manghi

2011-10-01

01:21 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work
Thanks, applied in commit:b8305a7 Alexander Bruy
01:21 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work
Thanks, applied in commit:b8305a7 Alexander Bruy
12:00 PM Bug report #4341: Road Graph plugin. Button 'expot' not work
-2) comment fix-
Please delete it from path.
Sergey Yakushev
11:23 AM Bug report #4341 (Closed): Road Graph plugin. Button 'expot' not work
1) Button 'export' not work
2) comment fix
3) network-analysis API-fix: use only inVertex() outVertex() functions
Sergey Yakushev
01:21 AM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class
Thanks, applied in commit:a0e39e6 Alexander Bruy
01:21 AM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class
Thanks, applied in commit:a0e39e6 Alexander Bruy
01:39 PM Bug report #4342 (Closed): Doxygen output has't QgsGraphAcr class
Sergey Yakushev
01:26 PM Bug report #4009 (Closed): wrong CRS definition
closing for the lack of feedback. Jürgen Fischer
01:26 PM Bug report #4009 (Closed): wrong CRS definition
closing for the lack of feedback. Jürgen Fischer
01:26 PM Bug report #4009 (Closed): wrong CRS definition
closing for the lack of feedback. Jürgen Fischer
05:45 AM Feature request #4339 (Closed): Add data defined color to new symbology
You are right! Closing this as duplicate. Anita Graser
05:45 AM Feature request #4339 (Closed): Add data defined color to new symbology
You are right! Closing this as duplicate. Anita Graser
02:40 AM Feature request #4339: Add data defined color to new symbology
duplicate of #3129 ? Giovanni Manghi
05:38 AM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
Thaddeus - wrote:
> Zoom in and Zoom out work OK too.
cannot replicate here on both windows (seven) and linux and qg...
Giovanni Manghi
02:33 AM Bug report #4305: Query builder: added ' ' around numeric fields (wrong)
Jürgen Fischer wrote:
> not reproducable here - comparing numeric fields to strings containing numbers works fine wit...
Giovanni Manghi
02:22 AM Bug report #3694 (Closed): WMS quality worse on QGIS server compared to QGIS desktop
Giovanni Manghi
02:03 AM Bug report #3694: WMS quality worse on QGIS server compared to QGIS desktop
I think this was fixed meanwhile. I don't see the problem anymore.
Andreas
Andreas Neumann

2011-09-30

03:23 PM Bug report #4340: QGIS crashes on full zoom or zoom to layer extent.
Zoom in and Zoom out work OK too. Thaddeus -
03:22 PM Bug report #4340 (Closed): QGIS crashes on full zoom or zoom to layer extent.
QGIS instantly disappears from screen when doing a "Zoom Full" or "Zoom to layer extent" on an a single SRT30 file an... Thaddeus -
03:01 PM Bug report #4305: Query builder: added ' ' around numeric fields (wrong)
I get the same problem. Osgeo4w dev James Stott
12:59 PM Bug report #4305 (Feedback): Query builder: added ' ' around numeric fields (wrong)
not reproducable here - comparing numeric fields to strings containing numbers works fine with postgres and shapes. Jürgen Fischer
02:47 PM Bug report #3667 (Feedback): When opening a Version 1.4.0 project file (*.qgs) with Version 1.6.0...
Jürgen Fischer
02:45 PM Bug report #3694 (Feedback): WMS quality worse on QGIS server compared to QGIS desktop
Jürgen Fischer
02:30 PM Bug report #4216 (Feedback): error editing dbf over ssh / sftp
Does that also happen if you edit the file locally? What are you using to mount the filesystem? Jürgen Fischer
02:28 PM Bug report #4221 (Feedback): Cannot add values to new column in attribute table in same session
Jürgen Fischer
05:03 AM Bug report #4221: Cannot add values to new column in attribute table in same session
I cannot reproduce this problem using 1.7.0 on Win7. Anita Graser
02:19 PM Bug report #4282 (Closed): Wrong map zooming when using the "Attribute Table" zoom tool.
fixed in commit:ef9e214 Jürgen Fischer
02:19 PM Bug report #4282 (Closed): Wrong map zooming when using the "Attribute Table" zoom tool.
fixed in commit:ef9e214 Jürgen Fischer
01:13 PM Feature request #4327 (Feedback): UNC SVG paths instead of browse for folder
not reproducable here - the browse dialog also includes "Network Neighbourhood", so you can browse for network resour... Jürgen Fischer
10:21 AM Bug report #4298 (Closed): Patch: minor typos in the code
applied in commit:e139348
also ran scripts/chkspelling.sh to catch some more.
Jürgen Fischer
10:21 AM Bug report #4298 (Closed): Patch: minor typos in the code
applied in commit:e139348
also ran scripts/chkspelling.sh to catch some more.
Jürgen Fischer
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection
Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje...
Giovanni Manghi
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection
Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje...
Giovanni Manghi
09:39 AM Bug report #4333: EPSG:27700 is interpreted as custom projection
Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje...
Giovanni Manghi
09:34 AM Bug report #4333: EPSG:27700 is interpreted as custom projection
Jonathan Moules wrote:
> I'm not going to pretend to understand that response, but:
> "In your case the shape reproje...
Giovanni Manghi
09:31 AM Bug report #4333: EPSG:27700 is interpreted as custom projection
I'm not going to pretend to understand that response, but:
"In your case the shape reprojects fine" - is wrong.
When ...
Jonathan Moules
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection
The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection
The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
05:15 AM Bug report #4333 (Closed): EPSG:27700 is interpreted as custom projection
The CRS of your shape and the EPSG27700 in QGIS do not match simply because the CRSs definitions in QGIS are the upda... Giovanni Manghi
07:06 AM Bug report #4338 (Closed): russian comment in src/analysis/network/qgsgraph.h
Alexander Bruy
07:05 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h
fixed in commit:e55887f62b97a3dccbae0995596a6b3709664dca Alexander Bruy
04:40 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h
sorry Sergey Yakushev
04:40 AM Bug report #4338: russian comment in src/analysis/network/qgsgraph.h
sorry Sergey Yakushev
06:14 AM Feature request #4339 (Closed): Add data defined color to new symbology
Similar to data defined font color in new labeling, it would be nice to be able to use an attribute to color features... Anita Graser
05:25 AM Feature request #1659: add a 'reload button' to the QGIS table
I guess there should be a "Reload Layer" (not just the attributes but also features and layer extent). Anita Graser
05:25 AM Feature request #1659: add a 'reload button' to the QGIS table
I guess there should be a "Reload Layer" (not just the attributes but also features and layer extent). Anita Graser
05:19 AM Feature request #47 (Closed): raster legend in map composer
Anita Graser
05:19 AM Feature request #191 (Closed): Legend improvements - further to #117
Anita Graser
04:57 AM Bug report #4239 (Closed): Chopped-off labels (consider for New Generation Labeling)
Anita Graser
04:56 AM Bug report #4331 (Closed): Classification dialog issues
fixed in commit:a02b4802 Jürgen Fischer
04:56 AM Bug report #4331 (Closed): Classification dialog issues
fixed in commit:a02b4802 Jürgen Fischer
04:56 AM Bug report #4331 (Closed): Classification dialog issues
fixed in commit:a02b4802 Jürgen Fischer
04:52 AM Feature request #4217: Allow up to 5 decimal places for Width/Size Scale Field
Another (more important) reason to solve this (from bug #3825 which has been closed as duplicate):
In new symbology,...
Mayeul Kauffmann
04:28 AM Bug report #3825 (Closed): Two decimal places for symbology in map unit is not suited for lat-lon...
duplicate of #4217 Anita Graser
04:28 AM Bug report #3825 (Closed): Two decimal places for symbology in map unit is not suited for lat-lon...
duplicate of #4217 Anita Graser

2011-09-29

01:12 AM Bug report #4338 (Closed): russian comment in src/analysis/network/qgsgraph.h
Please comment in English. Jürgen Fischer
02:13 PM Bug report #4329 (Closed): PostGIS provider - estimated metadata URI parameter not copied
applied in commit:a2713fd0ed7129bff1a3390172b2649921ff630b Jürgen Fischer
02:12 PM Bug report #4328: Fix for python output directory not being correctly created for Win32
Could you elaborate what the actual problem is? Jürgen Fischer
 

Also available in: Atom