Activity

From 2013-11-13 to 2013-12-12

2013-12-12

04:05 PM Bug report #9203: R Plots are blank on qgis64bit
I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version? Filipe Dias
05:33 AM Bug report #9203: R Plots are blank on qgis64bit
The issue does seem to be similar to #7643, however, there are no solutions yet. From comments in #7643, I have trie... Raphael Vanderstichel
03:12 AM Bug report #9203 (Feedback): R Plots are blank on qgis64bit
duplicate of #7643 ? Giovanni Manghi
03:20 PM Bug report #8231: Layer is still visible after un-checking (while canvas is rendering)
I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I think it is related to #8403... X X
03:12 PM Bug report #8403 (Reopened): Toggling layer visibility to off doesn't work if you highlight a dif...
I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I agree it might be related to... X X
03:05 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi all, There is a modification in behavior of this patch (https://github.com/qgis/QGIS/pull/980).
Now, it contains ...
Alvaro Huarte
02:26 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
I am the author of this functionality and I'll try look into this eventually... Etienne Tourigny
02:04 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
I can confirm this is still the case in QGIS 2.0.1
Especially that vsizip datasets can't be repaired when asking to ...
Donovan Cameron
01:49 PM Bug report #9169: Grass raster values not identified properly
Is appears that you don't have the GRASS GDAL plugin installed. I am using QGIS and GRASS from KyngChaos. If you have... rcline -
08:26 AM Bug report #9202 (Closed): Can't write from python in integer fields of sqlite (not spatial) tables
Francisco Puga
08:16 AM Bug report #9202: Can't write from python in integer fields of sqlite (not spatial) tables
Ouch. Shame on me. It has been fixed already. I was launching "installed" qgis instead of the builded qgis.
Should i...
Francisco Puga
07:11 AM Bug report #9202: Can't write from python in integer fields of sqlite (not spatial) tables
I build qgis from source, commit 221263db95fc on Dec 8, and i'm still having this issue. Maybe a 32bit problem?
I at...
Francisco Puga
01:20 AM Bug report #9202 (Feedback): Can't write from python in integer fields of sqlite (not spatial) ta...
Just tested here (64bit Fedora)
* spatial layer: has no @[email protected] attribute and therefore the code fails for this
*...
Matthias Kuhn
07:44 AM Bug report #9209 (Closed): Rule based renderer: rules are not loaded when style is loaded from a ...
See Attached SLD. If I load it against my data (can't share that I'm afraid), QGIS just renders it all as grey. Looki... Jonathan Moules
04:09 AM Bug report #9208 (Closed): QGIS crashes when using addAttributes on any vector data provider
During a course students with QGIS Dufour 64 bit (on Windows 7) reported crashes when using "QgsVectorDataProvider::a... Giovanni Allegri
02:56 AM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
landry - wrote:
> works fine on openbsd.
and works fine here on both Linux and Windows.
Giovanni Manghi
01:36 AM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
yes i have a limit on the server to prevent insane usage (ie MAXSIZE 3600 in mapfile) but the requests made by qgis i... landry Landry Breuil
01:35 AM Bug report #9207 (Closed): window/panel resize problem
I'm using QGIS 2.0 on a Panasonic Toughpad, running Android 4.0.3.
I once 'full-screened' my Layers panel and now it...
Pascal Vanhees

2013-12-11

01:50 PM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
Works for me on 32-bit Windows and QGIS 2.0.1. Jukka Rahkonen
10:11 AM Bug report #9200 (Feedback): Failure to display orthoimagery on windows in png or jpg format
here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a...
Giovanni Manghi
10:11 AM Bug report #9200 (Feedback): Failure to display orthoimagery on windows in png or jpg format
here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a...
Giovanni Manghi
10:11 AM Bug report #9200 (Feedback): Failure to display orthoimagery on windows in png or jpg format
here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a...
Giovanni Manghi
09:07 AM Bug report #9200 (Closed): Failure to display orthoimagery on windows in png or jpg format
Fully reproducible on two qgis 2.0.1 installs on windows, try to load the public 'http://wms.craig.fr/ortho' server, ... landry Landry Breuil
12:54 PM Bug report #9184: Join attributes table fails to produce a correct attribute table if columns hav...
One part of the fix could be
outFields = vector.combineVectorFields(layer,layer2)
Anita Graser
11:40 AM Bug report #9203 (Closed): R Plots are blank on qgis64bit
The 'results viewer' shows empty 'R plots'. This problem is very similar to what was reported 1 year ago (Bug #5882)... Raphael Vanderstichel
09:51 AM Bug report #9169: Grass raster values not identified properly
rcline - wrote:
> This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released...
RJ RJ
09:49 AM Bug report #9189 (Closed): State units
Fixed in changeset commit:"bdb560c05a9c3fc364339229e3377227b5ec86ae". Jürgen Fischer
04:04 AM Bug report #9189 (Closed): State units
On the Settings->Options->Network page, there's a item for "cache settings". It says "Size". This should state whatev... Jonathan Moules
09:44 AM Feature request #9197 (Closed): Ignore bad URLs in Getcapabilies
QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn... Jürgen Fischer
09:44 AM Feature request #9197 (Closed): Ignore bad URLs in Getcapabilies
QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn... Jürgen Fischer
05:45 AM Feature request #9197 (Closed): Ignore bad URLs in Getcapabilies
Following from - http://osgeo-org.1560.x6.nabble.com/WMS-layer-not-working-in-QGIS-td5093606.html
The WMS at this U...
Jonathan Moules
09:44 AM Bug report #9201 (Feedback): Select by Location Failure on complex polygons
Can you share the data that causes the issue? Giovanni Manghi
09:44 AM Bug report #9201 (Feedback): Select by Location Failure on complex polygons
Can you share the data that causes the issue? Giovanni Manghi
09:44 AM Bug report #9201 (Feedback): Select by Location Failure on complex polygons
Can you share the data that causes the issue? Giovanni Manghi
09:36 AM Bug report #9201 (Closed): Select by Location Failure on complex polygons
There is an issue with large complex vectors and the Select by Location tool.
I have a polygon which has 350,000 no...
Neil Benny
09:38 AM Bug report #9202 (Closed): Can't write from python in integer fields of sqlite (not spatial) tables
I'm using the python console to automatice a process that includes copy values from a dbf layer to a sqlite (non spat... Francisco Puga
08:10 AM Bug report #9199 (Closed): Centroid fill: allow choose to have just 1 centroid in multipart polygons
as it works now, a centroid is generated for each part of multipart polygons. Giovanni Manghi
07:57 AM Feature request #9198 (Open): Customisation menu improvements
Following from #9134
I'd suggest that only one column should be shown "Label". If label is empty then show the Objec...
Jonathan Moules
07:22 AM Bug report #9022: Spatialite views are not editable
One more quirk:
add view from add layer dialog => CAN edit (once fix the case issue),
<datasource>dbname='./OSP_Des...
Brian Freed
06:51 AM Bug report #9022 (Closed): Spatialite views are not editable
Turns out, it's not a QGIS regression, it's an unintended side effect of a change in Spatialite 4.
https://www.gaia-...
Brian Freed
06:57 AM Bug report #8964 (Closed): GDAL Translate Problem on QGIS 2.0.1
Nicolas Cadieux wrote:
> See #9156. Both issue seem related.
this is fixed in qgis master.
Giovanni Manghi
06:51 AM Bug report #7209: WCS client seems broken
other services that can be tested
http://www.pcn.minambiente.it/PCNDYN/catalogowcs.jsp
Giovanni Manghi
06:51 AM Bug report #7209 (Reopened): WCS client seems broken
On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service... Giovanni Manghi
06:51 AM Bug report #7209 (Reopened): WCS client seems broken
On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service... Giovanni Manghi
05:59 AM Feature request #9193: Differentiate add layer dialogs
Sorry Jürgen, I wasn't clear. This isn't a duplicate (I opened the other issue too) and applies to WFS too.
See the ...
Jonathan Moules
05:18 AM Feature request #9193 (Closed): Differentiate add layer dialogs
WFS selection window already mentions WFS and the rest is a duplicate of #9192. Jürgen Fischer
05:18 AM Feature request #9193 (Closed): Differentiate add layer dialogs
WFS selection window already mentions WFS and the rest is a duplicate of #9192. Jürgen Fischer
04:17 AM Feature request #9193 (Open): Differentiate add layer dialogs
QGIS has lots of "Add layer" dialogs which all look extremely similar. How about adding some big text somewhere (and ... Jonathan Moules
05:36 AM Bug report #9101: Raster artefact in composer pdf export
I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU...
marisn -
05:36 AM Bug report #9101: Raster artefact in composer pdf export
I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU...
marisn -
05:20 AM Bug report #9194 (Closed): DPI-Mode drop-down doesn't work until editing
Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc". Jürgen Fischer
04:24 AM Bug report #9194 (Closed): DPI-Mode drop-down doesn't work until editing
1) Open WMS\\WMTS dialog.
2) Click "New"
The "DPI-Mode" drop-down menu isn't available. You need to make whatever se...
Jonathan Moules
05:20 AM Feature request #9192 (Closed): WMS/WCS - titlebar should state what the dialog does
Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc". Jürgen Fischer
04:15 AM Feature request #9192 (Closed): WMS/WCS - titlebar should state what the dialog does
For both the WMS/WMTS and WCS add-layer dialogs, the text at the top of the box says "Add Layer(s) from a Server". Wh... Jonathan Moules
04:49 AM Bug report #8874 (Closed): Right clicking on error = little black box for a context menu
Yep, this seems to be fixed in the weekly build. Thanks! Jonathan Moules
04:44 AM Bug report #9196 (Closed): WMTS and CRS issue
1) Connect QGIS WMTS to http://maps.warwickshire.gov.uk/gs/gwc/service/wmts
2) Add any of the three tilesets.
====
N...
Jonathan Moules
04:26 AM Feature request #9195 (Open): No "Referer" for WFS/WCS connections
Add "Referer" to the WFS and WCS new connection dialogs.
Possibly considerable as a bug because it's inconsistent wi...
Jonathan Moules
04:12 AM Bug report #9190: Deleting entry from servers list - can still "Connect"
"Edit", "Delete" and "Save" are also not greyed out at this point. Jonathan Moules
04:07 AM Bug report #9190 (Closed): Deleting entry from servers list - can still "Connect"
1) Add a server to WMS/WFS/WCS dialog
2) Delete that server (so there are now no servers)
The "Connect" button is st...
Jonathan Moules
04:11 AM Bug report #9191 (Closed): "Ok" ungreyed out when no URL entered (WMS/WFS/WCS dialogs)
1) "New" WMS/WFS/WCS connection
2) Only enter a "Name"
3) Can now press "Ok" - but the URL hould be mandatory as it's...
Jonathan Moules
03:17 AM Bug report #7495 (Closed): compile error with Qwt 6.1
Jürgen Fischer
03:08 AM Bug report #7495: compile error with Qwt 6.1
It seems the error goes to QwtPolar - which needs to be built against Qt4. After I have recompiled QwtPolar and used ... Xavier Fung
01:59 AM Bug report #7495: compile error with Qwt 6.1
Xavier Fung wrote:
> and a partial revert of the CMakeLists.txt changes in the above changeset.
Why? That should on...
Jürgen Fischer
01:55 AM Bug report #7495: compile error with Qwt 6.1
looks like qwtpolar (or something else) is built against qt5, while qgis is built against qt4. Matthias Kuhn
01:52 AM Bug report #7495: compile error with Qwt 6.1
I can build with external qwtpolar (using qwtpolar-svn) and a partial revert of the CMakeLists.txt changes in the abo... Xavier Fung
01:05 AM Bug report #7495: compile error with Qwt 6.1
fortunately, qwtpolar 1.1.0-rc1 has fixes for qwt 6.1.0 (http://sourceforge.net/p/qwtpolar/code/commit_browser) - qgi... Dražen Odobašić

2013-12-10

11:38 PM Bug report #7495 (Reopened): compile error with Qwt 6.1
ArchLinux and Fedora 20 now offers Qwt 6.1.0. Is it possible to update QwtPolar to support Qwt 6.1.0? Xavier Fung
08:04 PM Feature request #9188 (Closed): Add Inkscape-like color selection
The selection options that [[inkscape|http://inkscape.org/]] uses in the "Fill and Stroke" menu for flat color would ... Miles McCammon
06:11 PM Bug report #8964 (Reopened): GDAL Translate Problem on QGIS 2.0.1
See #9156. Both issue seem related. Nicolas Cadieux
06:09 PM Bug report #9156: gdal translate creation options are not immediately added to the command
See #8964 Nicolas Cadieux
05:59 PM Bug report #9156: gdal translate creation options are not immediately added to the command
Hi,
I also noticed that the -of switch is always on Gtiff even if a different file format is selected. If, for exampl...
Nicolas Cadieux
02:28 AM Bug report #9186 (Closed): Assign projection dialog issue
Duplicates #6210 Alexander Bruy
02:28 AM Bug report #9186 (Closed): Assign projection dialog issue
Duplicates #6210 Alexander Bruy
02:28 AM Bug report #9186 (Closed): Assign projection dialog issue
Duplicates #6210 Alexander Bruy
02:28 AM Bug report #9186 (Closed): Assign projection dialog issue
Duplicates #6210 Alexander Bruy
02:04 AM Bug report #7209: WCS client seems broken
Gavin Fleming wrote:
> I'm getting this same error with QGIS master. With my own geoserver WCS I get
>
> WCS provid...
Radim Blazek
01:08 AM Bug report #8874: Right clicking on error = little black box for a context menu
Fixed here.
commit from Oct 16 is there and the context menu is not black (i.e. looks good).
Matthias Kuhn

2013-12-09

12:52 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Reasoning: 2.5D layers are not supported by the plugin, but still available as source layers in the settings. This fi... Matthias Kuhn
04:29 AM Bug report #9174 (Closed): QGIS crashes when calculating Shortest Path (Road Graph) with attached...
Fixed in changeset commit:"758f5e5df9b31f9586af24f152a4dfefba1784ef". Matthias Kuhn
04:10 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
v.clean now works after using Giovanni's settings (I used break instead of snap before) and moving the data out of a ... Jonas Ohlund
03:52 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Jonas, I just had a look at your latest log (v_clean)
I hope you are not afraid of a short test involving the edit o...
Matthias Kuhn
03:45 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile

> @Giovanni: yes, running shortest path with the cleaned files you attached worked so it feels like I'm getting clos...
Giovanni Manghi
03:39 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Jonas Ohlund wrote:
> @Richard Im pretty sure the data isnt corrupt.
the data is not corrupt, but it can have geomet...
Giovanni Manghi
12:47 AM Bug report #9185 (Closed): Crash when perform some commands in Python console
Matthias Kuhn
06:48 PM Bug report #9185: Crash when perform some commands in Python console
It looks like cause of my issue is #777. dr -
06:42 PM Bug report #9185 (Closed): Crash when perform some commands in Python console
Open vector layer and select one feature. Then open Python console and run the following commands:... dr -
07:05 PM Bug report #9186: Assign projection dialog issue
The same issue for "Warp (Reproject)" tool. dr -
07:02 PM Bug report #9186 (Closed): Assign projection dialog issue
* Raster -> Projections -> Assign projection
* Select raster file
* Click button Select Desired SRS
Selecting SRS fr...
dr -
03:15 PM Bug report #8185 (Closed): QgsRasterFormatSaveOptionWidget "validate" button returns always "Valid"
It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid.
Giuseppe Sucameli
03:15 PM Bug report #8185 (Closed): QgsRasterFormatSaveOptionWidget "validate" button returns always "Valid"
It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid.
Giuseppe Sucameli
03:11 PM Bug report #9183 (Closed): Wrong Icon when sorting a column in Attribute table
Using Settings -> Options -> General and changing the Style from "Cleanlook" to any other Style did resolve my issue.... Jerome Alary
01:45 PM Bug report #9183: Wrong Icon when sorting a column in Attribute table
This is Qt theme related to match the OS the theme is meant for. I use the Windows Vista theme and the sort order is... Nathan Woodrow
11:17 AM Bug report #9183 (Closed): Wrong Icon when sorting a column in Attribute table
Sorting a columnshow a wrong side sorting indication
Sorting a field alphabetically (from null to z) should display...
Jerome Alary
02:54 PM Bug report #9178 (Closed): gdal_merge
fixed in master fc247672b059e04496986cb9a63429b3679e2c38 Etienne Tourigny
08:08 AM Bug report #9178: gdal_merge
Thanks - this works! Hope it will be fixed.
Inserting this text
gdal_merge.bat -a_nodata -9999 -of GTiff -o "C:/Us...
Lene Fischer
05:57 AM Bug report #9178 (Feedback): gdal_merge
What is the nodata value you are using, is it -9999 ?
Can you try to add the following to the command (by clicking o...
Etienne Tourigny
05:11 AM Bug report #9178 (Closed): gdal_merge
I have a problem while using gdal_merge from Raster>Miscellanious>Merge
While setting No data value the result comes ...
Lene Fischer
01:07 PM Bug report #9181: Crashes when trying to resume node editing after a rollback
Done:
https://github.com/qgis/QGIS/pull/1024
Alvaro Huarte
08:43 AM Bug report #9181: Crashes when trying to resume node editing after a rollback
I get same crash in QGIS master.
I think that 'node tool' does not releases its 'QgsSelectedFeature' member after ro...
Alvaro Huarte
06:40 AM Bug report #9181 (Closed): Crashes when trying to resume node editing after a rollback
Repeatable crash! I'm using QGIS version 2.0.1 - Dufour, code revision ebebdf3. To create crash I do this:
Start QG...
Graham Ford
12:00 PM Bug report #9184 (Closed): Join attributes table fails to produce a correct attribute table if co...
The "Join attributes table" in "Vector general tools" fails to produce a correct attribute table if there are columns... Anita Graser
10:28 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
I would not call it entirely new problem. I feel like these are all related. While true, that original negative fract... Mikhail Titov
08:39 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
The new problem is not that additional no data value is ignored but that the original data source no data value (-999... Radim Blazek
08:30 AM Bug report #9101: Raster artefact in composer pdf export
Could you create +simple+ test project?
Does it work OK in 1.8?
Radim Blazek
08:21 AM Bug report #9182 (Closed): Range in Min - Max change
While setting a style for a rasterDEM from 'Singleband Grayscale' to 'Singleband Pseudocolour' the range in Min Max c... Lene Fischer
06:33 AM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
rcline - wrote:
> This is a bug that seems to occur frequently on new installs. The problem appears to occur with all...
Giovanni Manghi
06:00 AM Feature request #9180 (Closed): Shortest Path (Road Graph) plugin cannot handle 2.5D shape files
Before (see #9174) QGIS crashed when the Road Graph plugin was used on 2.5D shape files.
The crash is fixed, and 2.5...
Richard Duivenvoorde
05:51 AM Bug report #9179: Info-tool in rasterDEM
Embarrassing - for me - You are correct!
I´ve been using a projector, and my screen has changed size.
Thanks!
Rega...
Lene Fischer
05:47 AM Bug report #9179 (Closed): Info-tool in rasterDEM
The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che... Borys Jurgiel
05:47 AM Bug report #9179 (Closed): Info-tool in rasterDEM
The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che... Borys Jurgiel
05:28 AM Bug report #9179 (Closed): Info-tool in rasterDEM
The Info-tool does not show the values for coordinates or z-value
Using weekly from december 2. 2013.
http://screenc...
Lene Fischer
04:34 AM Bug report #8996: Composer crashes QGIS when setComposition() method called
/KeepReference/ sounds better indeed. Matthias Kuhn
02:24 AM Feature request #9176 (Closed): add layerid in record category for expressions
it might be useful in layer actions if you want to edit features.
Hence, you can create generic action without explic...
Denis Rouzaud
01:45 AM Feature request #6768 (Closed): Diagrams: connect Expression builder to attributes and size fields
Matthias Kuhn
01:36 AM Feature request #6768: Diagrams: connect Expression builder to attributes and size fields
Duplicate of #8682 ... Stéphane Brunner

2013-12-08

12:40 AM Bug report #9175 (Closed): [processing] scripts with non ascii character can't be saved
Adding a non ascii character in a script content fails on load, even with declaring # -*- coding: iso-8859-1 -*- on f... Regis Haubourg
12:39 AM Feature request #5112 (Closed): Allow acquiring legend symbols from WMS (if available) using GetL...
implemented in master Jürgen Fischer
12:39 AM Feature request #5112 (Closed): Allow acquiring legend symbols from WMS (if available) using GetL...
implemented in master Jürgen Fischer
07:58 PM Bug report #8996 (Reopened): Composer crashes QGIS when setComposition() method called
There is /KeepReference/ argument annotation in SIP that should take care of these cases: increase the reference coun... Martin Dobias
03:53 PM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
@Richard Im pretty sure the data isnt corrupt. Same shapes works fine with ArcGIS at school. Could the "strange chara... Jonas Ohlund
11:47 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann...
Jonas Ohlund
11:47 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann...
Jonas Ohlund
11:39 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
yep, confirmed here. The v.cleaned data works.
Thinking it was a data related issue, I already tried to resave the s...
Richard Duivenvoorde
08:19 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Jonas Ohlund wrote:
> Hi again,
>
> Many thanks for your quick assistance! It worked with Richards dutch shape file ...
Giovanni Manghi
05:26 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile

Crash confirmed here. Attached shp files crash both 2.0 and current master on Linux.
Running QGIS via strace and ou...
Richard Duivenvoorde
04:09 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ...
Jonas Ohlund
04:09 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ...
Jonas Ohlund
02:24 AM Bug report #9174: QGIS crashes when calculating Shortest Path (Road Graph) with attached shapefile
Yep, here on debian too: both 2.01 and master are working fine.
@jonas I'll sent you zip file with some dutch roads ...
Richard Duivenvoorde
01:07 AM Bug report #9174 (Feedback): QGIS crashes when calculating Shortest Path (Road Graph) with attach...
it does not seems to crash while testing under Linux and Windows. Se please:
*) test on another platform and/or mac ...
Giovanni Manghi
03:20 PM Bug report #9172: Random classifier does not use base symbol
Tim - I don't understand the issue you're trying to describe here as it seems to be working correctly for me. Can you... Nyall Dawson
08:58 AM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
This is a bug that seems to occur frequently on new installs. The problem appears to occur with all of the GDAL raste... rcline -
08:00 AM Bug report #9169: Grass raster values not identified properly
This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released. As a work around... rcline -
03:00 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Jeremy Palmer wrote:
> Hi Alvaro,
>
> Thanks for the reply. In that case it might be worth stating on the slider lab...
Alvaro Huarte
02:31 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi Alvaro,
Thanks for the reply. In that case it might be worth stating on the slider label that it is a advanced ex...
Jeremy Palmer

2013-12-07

07:45 PM Bug report #9174 (Closed): QGIS crashes when calculating Shortest Path (Road Graph) with attached...
*New description:*
with the attached shape "vagkartan_sv.zip" the road graph plugin crashes QGIS (tested on multiple...
Jonas Ohlund
02:48 AM Bug report #9172 (Closed): Random classifier does not use base symbol
The new random colour ramp classified is great but there is one usability issue: the base symbol is not cloned. The e... Tim Sutton
02:42 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
QGIS 2.0.1
Same error.
Vector -> Geometry Tools -> Singleparts to multipart...
Andrey Isakov

2013-12-06

01:02 PM Bug report #9101 (Reopened): Raster artefact in composer pdf export
Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac... marisn -
01:02 PM Bug report #9101 (Reopened): Raster artefact in composer pdf export
Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac... marisn -
01:02 PM Bug report #9101 (Reopened): Raster artefact in composer pdf export
Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac... marisn -
01:02 PM Bug report #9101 (Reopened): Raster artefact in composer pdf export
Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac... marisn -
10:46 AM Feature request #9094: Del-key should delete feature
Hi, summarizing, We have implemented several shortcut changes in QGIS desktop application in order to make more agile... Alvaro Huarte
08:26 AM Bug report #3840 (Open): "additional no data value" has no effect (identify, raster calculator, h...
Giovanni Manghi
08:01 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
I forgot to attach GeoTiff Mikhail Titov
07:58 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N...
Mikhail Titov
07:58 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N...
Mikhail Titov
07:58 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N...
Mikhail Titov
05:49 AM Bug report #8822 (Closed): OGR: Repack in running session
Fixed in changeset commit:"ba76c99037d84fb0fbc7d3eea7a3a6bcc5f69148". Matthias Kuhn
04:49 AM Bug report #8822: OGR: Repack in running session
I suspect the following report is connected to this bug:
http://gis.stackexchange.com/questions/58101/how-to-avoid-c...
Matthias Kuhn
03:59 AM Bug report #9024 (Closed): core dump on opening project
Closed due to lack of information. Please reopen, if you can attach affected data. Thank you. Matthias Kuhn
03:58 AM Bug report #8942: R6034 runtime error
I cannot remember any recent complaints about this issue. Is this still active? Matthias Kuhn
03:54 AM Bug report #9145: Range Edit Widget not Selectable for Spatialite Layers.
Fixed for the integer case. It seems to work here with real, so if there is also a problem, please reopen this and at... Matthias Kuhn
03:52 AM Bug report #9145 (Closed): Range Edit Widget not Selectable for Spatialite Layers.
Fixed in changeset commit:"b92e1243399ec5df9ea173d65e7a6509085a1111". Matthias Kuhn
03:30 AM Feature request #8682: Add expressions to diagrams
Nice. Let me know when you are done, I will happily review your changes. Matthias Kuhn
03:23 AM Feature request #8682: Add expressions to diagrams
I start working on it, but I don't know how to assign it. Stéphane Brunner
03:19 AM Bug report #9171: Add expression support in diagram
Thanks Mathias for the reference :-) Stéphane Brunner
03:11 AM Bug report #9171 (Closed): Add expression support in diagram
Matthias Kuhn
03:07 AM Bug report #9171 (Closed): Add expression support in diagram
Add expression support to the size attribute and the diagram attributes. Stéphane Brunner

2013-12-05

12:43 AM Bug report #9169 (Feedback): Grass raster values not identified properly
cannot confirm, at least on linux qgis/master Giovanni Manghi
12:43 AM Bug report #9169 (Feedback): Grass raster values not identified properly
cannot confirm, at least on linux qgis/master Giovanni Manghi
12:43 AM Bug report #9169 (Feedback): Grass raster values not identified properly
cannot confirm, at least on linux qgis/master Giovanni Manghi
05:12 PM Bug report #9169 (Closed): Grass raster values not identified properly
When viewing a GRASS raster in QGIS, the identify tool will display the band value for a couple of time, but will eve... RJ RJ
12:02 AM Bug report #6146 (Reopened): Offline editing tool broken
Giedrius Vaivilavičius
12:48 PM Bug report #9141: processing script editor window does not have close button on linux

Well, I have a close button in the titlebar now :-)
see screenshot
if you now could explicitly set this buttons, c...
Richard Duivenvoorde
11:39 AM Bug report #9101: Raster artefact in composer pdf export
There was raster reprojector after renderer also using color 0,0,0,0 for no data. Radim Blazek
11:38 AM Bug report #9101 (Closed): Raster artefact in composer pdf export
Fixed in changeset commit:"330b46b8a9291fd81d88f6ff8092003c7aac8234". Radim Blazek
09:28 AM Bug report #9168 (Closed): Oracle dialog does not forget its filter when 'Search options' is UNch...
Fixed in changeset commit:"fd6e37cdcf226a05ef3da83f4a0f91b6ad9479be". Jürgen Fischer
08:35 AM Bug report #9168 (Closed): Oracle dialog does not forget its filter when 'Search options' is UNch...
After retrieving the layers from a oracle db connection (in Add Oracle Table(s) dialog), it is possible to click a ch... Richard Duivenvoorde
08:24 AM Bug report #9167 (Closed): Numerical Vertex Edit in 2.0.1
File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/ Jürgen Fischer
08:24 AM Bug report #9167 (Closed): Numerical Vertex Edit in 2.0.1
File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/ Jürgen Fischer
08:19 AM Bug report #9167 (Closed): Numerical Vertex Edit in 2.0.1
Hi,
the Numerical Vertex Edit appears to have a bug.
I edit a point shapefile and change the coordinates of the poi...
Oliver Buxton
08:18 AM Bug report #9138 (Closed): QgsGeometry.convertToMultiType() fails
Fixed in changeset commit:"63c62adf213a9f1b1ba9cc07d4d7ae904e392503". Marco Hugentobler
08:10 AM Bug report #9166: invalid field name in expressions make QGIS crash in debug mode
I wonder if we should change all the QgsFields methods from [] to .value() which does check if the index exists at th... Matthias Kuhn
08:08 AM Bug report #9166 (Closed): invalid field name in expressions make QGIS crash in debug mode
Fixed in changeset commit:"f428c869a980cc707da1fe96e2ba8ba763af78c6". Matthias Kuhn
08:06 AM Bug report #9166 (Feedback): invalid field name in expressions make QGIS crash in debug mode
Jürgen Fischer
08:05 AM Bug report #9166: invalid field name in expressions make QGIS crash in debug mode
Not reproducable here. Tried joining a shape with a csv and renamed the csv field on windows 64bit. no crash. Jürgen Fischer
07:38 AM Bug report #9166 (Closed): invalid field name in expressions make QGIS crash in debug mode
If you have invalid field names in the expression of a label in a layer, QGIS will crash at start.
The crash occurs i...
Denis Rouzaud
02:10 AM Bug report #8932: segmentation fault in GDAL when exiting, QGIS hangs
Should be fixed in commit:f2fbb2f with help of the methods mentioned by EvanR/Etienne.
I could not reliably reproduc...
Matthias Kuhn
01:43 AM Bug report #9157 (Feedback): Offline editing tool is very slow when it creates the Spatialite loc...
Should be fixed in commit:0bfc766488 Alexander Bruy
01:40 AM Bug report #9165: curved labels: words printed one above the other
screen:
!http://i.imgur.com/beEcsO0.png!
printed:
!http://i.imgur.com/zdA79vGh.png!
Denis Rouzaud
01:38 AM Bug report #9165 (Closed): curved labels: words printed one above the other
When using curved labels on lines, labels are displayed correctly on screen but printed one above the other.
Weird......
Denis Rouzaud

2013-12-04

11:47 PM Bug report #9141 (Feedback): processing script editor window does not have close button on linux
Should be fixed in commit:e1186f164d. Please test. Alexander Bruy
11:16 PM Bug report #9141 (In Progress): processing script editor window does not have close button on linux
This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to... Alexander Bruy
11:16 PM Bug report #9141 (In Progress): processing script editor window does not have close button on linux
This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to... Alexander Bruy
01:08 PM Feature request #9094: Del-key should delete feature
noone noone wrote:
> Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a k...
Alvaro Huarte
10:50 AM Feature request #9094: Del-key should delete feature
Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a keymap reference to av... Noone Noone
12:25 PM Bug report #9134: customization menu doesn't work
I'm not able to write that code, sorry...
Maybe someone else can help with this issue, I think it wouldn't take much...
matteo ghetta
10:42 AM Bug report #9134: customization menu doesn't work
matteo ghetta wrote:
> Do you plan to do the same work with the Raster menu?
Not really. Could you create pull reque...
Radim Blazek
12:01 PM Bug report #8874: Right clicking on error = little black box for a context menu
I could not find your commit in my git log, but I can read Copy in a black block here on master (linux).
Is there a ...
Richard Duivenvoorde
11:42 AM Feature request #9083: Make contextmenus context aware
+1
I think we should maybe start some UI design group which could have a look into this kind of things, and formula...
Richard Duivenvoorde
11:20 AM Bug report #9142: "format_number" function error in label expression
hi, can you maybe share some dataset for which this is happening?
can you maybe also try on another computer or OS?
...
Richard Duivenvoorde
07:15 AM Feature request #9163: Extend DBManager to Oracle
In fact,
I tested typing a sql query directly in the qgs file, and it fails to load project, when doing the same wit...
Regis Haubourg
06:33 AM Feature request #9163 (Closed): Extend DBManager to Oracle
Hi all,
I miss the ability to create a datasource from a custom SQL query in Oracle.
Extending DBmanager (or have a...
Regis Haubourg
04:59 AM Feature request #8500: Add the ability to get the original GetfeatureInfo and GetLegendGraphic fo...
Am I the only one interested in this bug? I miss the possibility to add external WMS layers to my projects and to hav... Nicolas Boisteault
04:54 AM Bug report #9162 (Closed): Crash when typing something into python editor
When I write something into the python editor, QGIS crashes. When running from the command line, i get this warning:
...
giovanni meles
04:40 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
Good point Matthias, maybe in a case where the new scale would be larger than the current scale the map should only pan. Bernhard Ströbl
04:27 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
Considering your example: If you load Europe and want to zoom to an address in Berlin Kreuzberg but you are currently... Matthias Kuhn
01:31 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
H Matthias and Richard,
I had 1% in mind and was thinking of having a user-setting for this, if this setting is not ...
Bernhard Ströbl
01:11 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom

Well, on a osm dataset, or another huge dataset you would not so easily select one point to pan to it (I think). So ...
Richard Duivenvoorde
03:20 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ...
Giovanni Manghi
03:20 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ...
Giovanni Manghi
03:20 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ...
Giovanni Manghi
02:55 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
Hi.
I'm using Qgis 2.1.0 and SAGA 2.1.0 modules. When processing the module Gridding/inverse distance(and more) I get...
Ramiro Romero

2013-12-03

12:53 AM Bug report #9160: if only one point is selected "zoom to selected" does not zoom
Hi Bernhard,
How would you imagine this relation?
Would that work on e.g. an OSM dataset?
Matthias Kuhn
12:50 AM Bug report #9160 (Closed): if only one point is selected "zoom to selected" does not zoom
To reproduce: load a point layer, select one feature in the table and click "Zoom to selection"; the map is panned bu... Bernhard Ströbl
12:18 AM Feature request #9009: Field calculator expression should remember expression used
I think an online resource is not feasible for this, because these expressions are mostly very data specific, and not... Richard Duivenvoorde
10:07 PM Feature request #7878: Windows 8 Location Provider GPS Support
As I expected it was the crap driver from DELL. I made it work with new driver from Lenovo - 19.14.8401.4 24 Nov 2012... Miroslav Umlauf
03:47 PM Feature request #9159 (Open): [dbmanager] Option to attempt to add entry in geometry_columns for ...
Dbmanager currently reports a bunch of hints for optimising PostGIS tables, such as missing geometry indexes and tabl... Nyall Dawson
01:38 PM Bug report #9158 (Closed): lpad() and rpad() functions do not work in standard way
Fixed in changeset commit:"bc825b4b46af8d8810abc4b5552921e891bf7bcf". Jürgen Fischer
01:18 PM Bug report #9158: lpad() and rpad() functions do not work in standard way
http://www.orafaq.com/wiki/LPAD_and_RPAD
http://www.postgresql.org/docs/9.1/static/functions-string.html
Lee Hachadoorian
01:17 PM Bug report #9158 (Closed): lpad() and rpad() functions do not work in standard way
In PostGIS and Oracle, lpad('A', 5, 'x') produces 'xxxxA'. In the expression editor in QGIS, it produces 'Axxxx'. Sim... Lee Hachadoorian
01:32 PM Bug report #9082: Failure to display getfeatureinfo results from mapserver 5.6
I added conversion to UTF-8 to WMS provider.
We should make QgsGmlSchema and QgsGml to support any encoding, probab...
Radim Blazek
01:28 PM Bug report #9082 (Closed): Failure to display getfeatureinfo results from mapserver 5.6
Fixed in changeset commit:"9d17f25521d675d356ecde4a383d82ae28070df9". Radim Blazek
11:16 AM Bug report #9082: Failure to display getfeatureinfo results from mapserver 5.6
Jukka Rahkonen wrote:
> Why not to make InfoFormat selectable in the WMS server settings?
It could be useful but the...
Radim Blazek
01:22 PM Feature request #9127 (Closed): DBManager should show Postgres materialized views
Fixed in changeset commit:"a4c365c7cf9f4bb0a5811712d3c514a267363975". Jürgen Fischer
01:07 PM Feature request #9127: DBManager should show Postgres materialized views
Materialized views don't appear in geometry_columns, but this is a fault of PostGIS. When PostGIS gets fixed, would t... Lee Hachadoorian
12:50 PM Bug report #9143 (Closed): Label Expression Dump program
Hi
Now we have all updated to the 2. december version - and now it works.
We also enconutered that we were unable to ...
Lene Fischer
09:40 AM Bug report #9143: Label Expression Dump program
I can not reproduce crash with 2.0.1 release on Mac.
Lene, do you have a custom Python expression function that is b...
Larry Shaffer
05:08 AM Bug report #9143: Label Expression Dump program

> All "weeklies":http://qgis.org/downloads/weekly/?C=M;O=D are standalone installer snapshots from osgeo4w.
yes I k...
Giovanni Manghi
04:56 AM Bug report #9143: Label Expression Dump program
Giovanni Manghi wrote:
> Lene Fischer wrote:
> > Hi Giovanni,
> > I´m using a total brand 'new' installation from wee...
Jürgen Fischer
04:48 AM Bug report #9143: Label Expression Dump program
Lene Fischer wrote:
> Hi Giovanni,
> I´m using a total brand 'new' installation from weekly. And my studets the same....
Giovanni Manghi
02:34 AM Bug report #9143: Label Expression Dump program
Hi Giovanni,
I´m using a total brand 'new' installation from weekly. And my studets the same.
Regards
Lene Fischer
Lene Fischer
06:43 AM Bug report #9153: geometryless tables gain a visibility checkbox in the TOC when inside a group
I asked a proposal to Martin Dobias to clean the legend code, API and UI.
If everything goes well, project should sta...
Denis Rouzaud
06:40 AM Bug report #9134: customization menu doesn't work
Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d...
matteo ghetta
06:40 AM Bug report #9134: customization menu doesn't work
Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d...
matteo ghetta
01:26 AM Bug report #8885 (Closed): Buttons (Ok, Cancel) disappear in "Apri Modulo" from Attribute Table
Fixed in changeset commit:"999a996b733925c78082ffdbd66afea2b7a2c813". Matthias Kuhn
01:02 AM Bug report #9135: PostGIS - materialized views only show if "also list tables with no geometry" i...
Is this an issue that will be solved? Or maybe it needs some hints on the GUI/help side? Matthias Kuhn
01:00 AM Bug report #9139: Relations do not work on MSSQL layers
It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ... Matthias Kuhn
01:00 AM Bug report #9139: Relations do not work on MSSQL layers
It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ... Matthias Kuhn

2013-12-02

04:25 PM Feature request #9094: Del-key should delete feature
Hi, there are new proposed improvements in 'node tool' to select and delete nodes of current feature in more agile wa... Alvaro Huarte
03:15 PM Bug report #9157 (Closed): Offline editing tool is very slow when it creates the Spatialite local...
A few weeks ago this issue (very slow creation of the SL databases) have been fixed in QGIS master, but apparently th... Giovanni Manghi
03:06 PM Bug report #9156 (Closed): gdal translate creation options are not immediately added to the command
open the gdal translate tool, activate the "creation options" checkbox and then add an option.
As you will see this...
Giovanni Manghi
03:02 PM Bug report #9155 (Closed): help dialog for gdal translate "creation options" does not seems to sh...
see attached image Giovanni Manghi
02:53 PM Feature request #9154 (Closed): ftools: polygon to edges
it would be very nice if in addition to the "polygon to lines" tool there would be a "polygon to edges" tool.
When m...
Giovanni Manghi
02:46 PM Bug report #9153 (Closed): geometryless tables gain a visibility checkbox in the TOC when inside ...
Add a geometryless table in a group. The table is given its special icon. Now uncheck and then check the group. The t... Giovanni Manghi
02:40 PM Bug report #9152 (Closed): symmetrical difference errors/warnings even when input geometries are ok
Pick the attached input files. Geometries are ok, at least qgis say so.
Now run a symmetrical difference.
If does n...
Giovanni Manghi
02:28 PM Bug report #9151 (Closed): zonal stats gives wrong results when features are not overlapped to an...
Take the linked sample data and run the zonal stats tool.
https://www.dropbox.com/s/jb452t5e64j6m70/zs.tar.gz
The r...
Giovanni Manghi
11:54 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Ok. I'll be waiting.
Ciao.
Marcel Foelsch
11:28 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Marcel Foelsch wrote:
> Can I do anything to make it right?
not necessary, I think I already isolated the issue.
I ...
Giovanni Manghi
11:26 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Can I do anything to make it right? Marcel Foelsch
10:15 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
The log does not appear to be the one right for the attached model (the log shows GRASS modules, the model has only S... Giovanni Manghi
06:07 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Here it is...This is a model that worked fine some updates before...
Marcel Foelsch
05:44 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Hi, can you share the model? Giovanni Manghi
05:06 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
I tried it but without success...
new log:...
Marcel Foelsch
04:58 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Marcel Foelsch wrote:
> Sorry...it's my first ticket.
no problem :)
can you try put your input data in a shorter p...
Giovanni Manghi
04:46 AM Bug report #9150: SAGA raster calculator fails when used in a processing model
Sorry...it's my first ticket.
log:...
Marcel Foelsch
04:38 AM Bug report #9150 (Feedback): SAGA raster calculator fails when used in a processing model
please configure processing to leave the Window open after it runs a module so you can access directly the log and th... Giovanni Manghi
04:38 AM Bug report #9150 (Feedback): SAGA raster calculator fails when used in a processing model
please configure processing to leave the Window open after it runs a module so you can access directly the log and th... Giovanni Manghi
04:38 AM Bug report #9150 (Feedback): SAGA raster calculator fails when used in a processing model
please configure processing to leave the Window open after it runs a module so you can access directly the log and th... Giovanni Manghi
04:36 AM Bug report #9150 (Closed): SAGA raster calculator fails when used in a processing model
When I'm using the raster caculator without the modeler it works fine. When I'm using the saga raster calculator in m... Marcel Foelsch
04:19 AM Bug report #7209: WCS client seems broken
I'm getting this same error with QGIS master. With my own geoserver WCS I get
WCS provider: Cannot get test dataset...
Gavin Fleming
01:55 AM Bug report #6146: Offline editing tool broken

> How to solve this?
the tool is broke, so you may want to a) wait for the fix or b) support its fix
Giovanni Manghi
01:16 AM Bug report #6146: Offline editing tool broken
On QGIS 2.0.1 synchronization problem remains (OS Ubuntu 12.04, Debian Wheezy).
Using qgiscloud plugin uploads a pos...
Giedrius Vaivilavičius

2013-12-01

11:09 PM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
Fixed in changeset commit:"f21562c86f1cdbf8181176904e382f26aafb1da9". Salvatore Larosa
05:29 PM Feature request #9094: Del-key should delete feature
Hi, I have tried to bring together all the comments and I have updated the pull request (https://github.com/ahuarte47... Alvaro Huarte
04:14 PM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> Well I think you only need to catch it in node tool, everything else just ignores it.
Hi Nat...
Alvaro Huarte
04:04 PM Feature request #9094: Del-key should delete feature
Well I think you only need to catch it in node tool, everything else just ignores it. Nathan Woodrow
04:00 PM Feature request #9094: Del-key should delete feature
Alvaro Huarte wrote:
> Nathan Woodrow wrote:
> > Alvaro Huarte wrote:
> > > Hi, We can not use Delete for deleting a ...
Alvaro Huarte
03:52 PM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> Alvaro Huarte wrote:
> > Hi, We can not use Delete for deleting a node if we use Delete for d...
Alvaro Huarte
03:21 PM Feature request #9094: Del-key should delete feature
Alvaro Huarte wrote:
> Hi, We can not use Delete for deleting a node if we use Delete for delete selected features to...
Nathan Woodrow
03:12 PM Feature request #9094: Del-key should delete feature
Hi, We can not use Delete for deleting a node if we use Delete for delete selected features too, as Giovanni said abo... Alvaro Huarte
05:15 PM Bug report #9149 (Closed): Overlay and Soft Light blend modes do not blend with vectors
Upon further testing it appears that I am incorrect; blend modes seem to be working as intended. I will reopen if I f... Evan Derickson
05:09 PM Bug report #9149: Overlay and Soft Light blend modes do not blend with vectors
It appears I am not used to Redmine's formatting. Could someone with the appropriate privileges please correct it for... Evan Derickson
05:08 PM Bug report #9149 (Closed): Overlay and Soft Light blend modes do not blend with vectors
h1. Expected behavior
When overlaying a raster on top of a vector layer, the *Overlay* and *Soft Light* blend modes s...
Evan Derickson
04:34 PM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
Found a work-around: if you use a varchar to store the LabelX and LabelY then QGIS behaves as expected. Alex Leith
03:49 PM Bug report #9148 (Closed): Data Defined Label Locations NULL value doesn't work as expected with ...
Steps to reproduce issue:
# Set up a layer in SQL Server with columns for LabelX and LabelY as float with NULL as de...
Alex Leith

2013-11-30

12:58 PM Bug report #9145: Range Edit Widget not Selectable for Spatialite Layers.
There is some other odd behavior I found when exploring this a bit more:
1. DB Manager recognizes the integer field ...
Torsten Ernst
12:43 PM Bug report #9145 (Closed): Range Edit Widget not Selectable for Spatialite Layers.
Unable to select the Range edit widget for spatialite layers. I've tried with int, small int, and real datatypes and ... Torsten Ernst
11:53 AM Bug report #9143: Label Expression Dump program
Just tested qgis master 64bit installed with osgeo4w. No issues here. Maybe a plugin is the cause? can you please tr... Giovanni Manghi
07:23 AM Bug report #9143: Label Expression Dump program
Data Attached
Regards
Lene Fischer
Lene Fischer
10:56 AM Feature request #9144 (Closed): add iface global to script namespace
Also it would be good toimport qgis.core by default Victor Olaya
10:38 AM Bug report #9139: Relations do not work on MSSQL layers
Hi Matthias,
Thank you for your quick reply.
Please find bellow the capture.
[6188] ..\\..\\..\\..\\..\\src\\core\...
Tudor Bărăscu
05:02 AM Bug report #9101: Raster artefact in composer pdf export
Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and... Radim Blazek
05:02 AM Bug report #9101: Raster artefact in composer pdf export
Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and... Radim Blazek
05:02 AM Bug report #9101: Raster artefact in composer pdf export
Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and... Radim Blazek
05:02 AM Bug report #9101: Raster artefact in composer pdf export
Images are written to PDF as JPEG. Because JPEG does not support transparency it is written as another mask image and... Radim Blazek

2013-11-29

12:57 AM Bug report #9143 (Feedback): Label Expression Dump program
Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux...
Giovanni Manghi
12:57 AM Bug report #9143 (Feedback): Label Expression Dump program
Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux...
Giovanni Manghi
12:57 AM Bug report #9143 (Feedback): Label Expression Dump program
Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux...
Giovanni Manghi
12:57 AM Bug report #9143 (Feedback): Label Expression Dump program
Hi,
it gives the same issue on qgis 2.0.1?
Can you attach sample data? I'm not able to replicate it on master/Linux...
Giovanni Manghi
11:15 PM Bug report #9143 (Closed): Label Expression Dump program
Using weekly from 25.november.
Trying to make a label with expression - the program is dumped (close down)
25 studen...
Lene Fischer
06:45 AM Bug report #9142 (Closed): "format_number" function error in label expression
Function "format_number" in expression:
format_number(($area / 10000), 2) ||' '|| "gat"
generates bad labels. I see...
Marcin Sołoguba
06:35 AM Bug report #9141 (Closed): processing script editor window does not have close button on linux
see subject: on linux the script editor does not have a close icon with me.
only way to close the editor window is a...
Richard Duivenvoorde
06:13 AM Bug report #9139: Relations do not work on MSSQL layers
Can you open a form with embedded table and check the output (on a terminal. I think on windows you will have to use ... Matthias Kuhn
05:45 AM Bug report #9139: Relations do not work on MSSQL layers
The foreign key/primary key columns have integer type.
Parent table: postgis vector layer from (id serial PKEY, ......
Tudor Bărăscu
04:07 AM Bug report #9139 (Feedback): Relations do not work on MSSQL layers
Matthias Kuhn
04:07 AM Bug report #9139: Relations do not work on MSSQL layers
What type do the foreign key / primary key columns have? Matthias Kuhn
03:35 AM Bug report #9139 (Closed): Relations do not work on MSSQL layers
I have tested relations (http://blog.vitu.ch/10112013-1201/qgis-relations) with postgis, sqlite, shapefiles and MSSQL... Tudor Bărăscu
03:36 AM Feature request #9140 (Open): Separating datasource, layer and style
Hi, currently layer represents a mix between a layer style and a datasource. In my work on doing maps for geostatisti... Noone Noone
03:17 AM Feature request #9094: Del-key should delete feature
I have no issue using Delete for deleting a node too. When you have the node tool active and a node selected then it... Nathan Woodrow
03:11 AM Feature request #9094: Del-key should delete feature
I do not agree with the backspace as use for removing a node. Is there a (technical) reason to make it different? Wha... Richard Duivenvoorde

2013-11-28

12:58 AM Bug report #9134: customization menu doesn't work
Customization only works for objects with objectName. objectName is automatically set by Qt for objects created in de... Radim Blazek
12:58 AM Bug report #9138 (In Progress): QgsGeometry.convertToMultiType() fails
Denis Rouzaud
11:52 PM Bug report #9138: QgsGeometry.convertToMultiType() fails
https://github.com/qgis/QGIS/pull/1014 Denis Rouzaud
01:32 PM Bug report #9138 (Closed): QgsGeometry.convertToMultiType() fails
I have a strange behavior with the QgsGeometry.convertToMultiType()
method here: it looks like the method is always f...
Paolo Corti
03:58 PM Feature request #9094: Del-key should delete feature
Pull request updated:
* Delete selected features in map canvas: DEL key without ask for confirmation.
* Delete selec...
Alvaro Huarte
08:17 AM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need...
Alvaro Huarte
06:35 AM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> Backspace already deletes a node when drawing a feature. I think backspace should delete a n...
Alvaro Huarte
05:20 AM Feature request #9094: Del-key should delete feature
Backspace already deletes a node when drawing a feature. I think backspace should delete a node too. Nathan Woodrow
05:18 AM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need...
Alvaro Huarte
02:32 AM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need...
Alvaro Huarte
02:21 AM Feature request #9094: Del-key should delete feature
I think those options work fine. If we have undo for a action 1) 2) 4) then there is no need to confirm, and in the ... Nathan Woodrow
01:32 AM Feature request #9094: Del-key should delete feature
Nathan Woodrow wrote:
> No not another option please. There is no need in this case. Like I, and others, have said u...
Alvaro Huarte
11:36 AM Bug report #9128 (Closed): wrong perimeter value in the identify feature tool
Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'... Giovanni Manghi
11:36 AM Bug report #9128 (Closed): wrong perimeter value in the identify feature tool
Similar issues (but with the area in the field calculator) have been already fixed in qgis master, and in fact I can'... Giovanni Manghi
04:18 AM Bug report #9137 (Closed): Typo in text message in the code ?
Nathan Woodrow
04:14 AM Bug report #9137: Typo in text message in the code ?
Huh? "provider plugins" is the plural of "provider plugin". Jürgen Fischer
03:34 AM Bug report #9137 (Closed): Typo in text message in the code ?
Hi,
in the source file https://github.com/qgis/QGIS/blob/master/src/app/qgisapp.cpp, line 627
The comment is "load ...
Sylvain Maillard
01:42 AM Bug report #9060 (Feedback): Area is wrong in QGIS master (again)
Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp...
Giovanni Manghi
01:42 AM Bug report #9060 (Feedback): Area is wrong in QGIS master (again)
Rhenriques Henriques wrote:
> Sorry Giovanni, but the bug surfaced again in NB 30900e9!! It has exactly the same symp...
Giovanni Manghi

2013-11-27

12:40 AM Feature request #7878: Windows 8 Location Provider GPS Support
Sorry no luck. Even on other ports it is not working though some other software works. I think it is also connected t... Miroslav Umlauf
03:13 PM Bug report #9135: PostGIS - materialized views only show if "also list tables with no geometry" i...
Nyall Dawson wrote:
> Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps th...
Jürgen Fischer
02:38 PM Bug report #9135: PostGIS - materialized views only show if "also list tables with no geometry" i...
Do you have "Don't resolve type of unrestricted columns (geometry)" ticked? (I do). Perhaps this bug is only trigger... Nyall Dawson
02:31 PM Bug report #9135: PostGIS - materialized views only show if "also list tables with no geometry" i...
Not reproducable here using PostgreSQL 9.3 with PostGIS 2.1. Here materialized views only disappear when 'Only look ... Jürgen Fischer
12:43 PM Bug report #9135 (Closed): PostGIS - materialized views only show if "also list tables with no ge...
PostGIS materialized views are not shown in the "Add PostGIS table" dialog UNLESS "also list tables with no geometry"... Nyall Dawson
02:36 PM Bug report #7905: unset keyboard shortcuts are not remembered
Confirmed. Unset shortcuts are restored to default values. Borys Jurgiel
02:17 PM Feature request #9094: Del-key should delete feature
No not another option please. There is no need in this case. Like I, and others, have said undo and redo are the rea... Nathan Woodrow
01:27 PM Feature request #9094: Del-key should delete feature
We can propose a configurable option:
* Delete selected features in map canvas: DEL key (+).
* Delete selected featu...
Alvaro Huarte
01:58 AM Feature request #9094: Del-key should delete feature
I hate confirmation dialogs so a +1 for me to not have one. The undo is enough if something goes wrong. Nathan Woodrow
01:51 AM Feature request #9094: Del-key should delete feature
How about sticking to the confirmation with DEL, and add a shortcut SHIFT + DEL for no-confirmation delete? That's wh... Matthias Kuhn
01:40 AM Feature request #9094: Del-key should delete feature
very much agree on the proposal above.
at the moment you are being asked for removal of a feature (while you can eas...
Richard Duivenvoorde
01:34 AM Feature request #9094: Del-key should delete feature
Hi, we can propose to user/dev ML several shortcut changes similar to Arcmap behavior:
Arcmap 9.3:
* Delete selecte...
Alvaro Huarte
02:13 PM Bug report #9060: Area is wrong in QGIS master (again)
Sorry Giovanni, but the bug surfaced again in nightly build commit:30900e9!! It has exactly the same symptoms it had ... Rhenriques Henriques
12:45 PM Bug report #9136 (Closed): Browser does not show Postgres materialized views
The browser pane currently ignores any Postgis materialized views. These should be shown in the browser alongside oth... Nyall Dawson
09:41 AM Bug report #9134 (Closed): customization menu doesn't work
It is not possible to customize single entries of the menu bar. For example trying to remove "geoprocessing" and "geo... matteo ghetta
07:02 AM Bug report #9131: WMS/WMTS dialog - loses text after /
Jonathan Moules wrote:
> Excellent response time. Why can't ESRI be like that? ;-) Thanks.
No "E$RI":http://richardb...
Jürgen Fischer
06:44 AM Bug report #9131: WMS/WMTS dialog - loses text after /
Jonathan Moules wrote:
> Why can't ESRI be like that?
Essential Service Request Ignored
this is how they are known...
Giovanni Manghi
06:41 AM Bug report #9131: WMS/WMTS dialog - loses text after /
Excellent response time. Why can't ESRI be like that? ;-) Thanks. Jonathan Moules
06:33 AM Bug report #9131 (Closed): WMS/WMTS dialog - loses text after /
Fixed in changeset commit:"30900e9b8960b1dbe13d08e903d17f77b3ef7bca". Jürgen Fischer
06:16 AM Bug report #9131 (Closed): WMS/WMTS dialog - loses text after /
1) Open WMS/WMTS dialog
2) Enter: "wmts - wppgeog3/geoserver" as the name; any url
When it saves it will save the na...
Jonathan Moules
06:54 AM Bug report #9132: WMTS GetCapabilities actually asks for WMS
Yes, but you can't expect users to do that. Most don't understand OGC service URL's. If the servers were actually com... Jonathan Moules
06:41 AM Bug report #9132 (Closed): WMTS GetCapabilities actually asks for WMS
Use @http://wppgeog3/geoserver/gwc/service/[email protected], if you want WMTS. Jürgen Fischer
06:41 AM Bug report #9132 (Closed): WMTS GetCapabilities actually asks for WMS
Use @http://wppgeog3/geoserver/gwc/service/[email protected], if you want WMTS. Jürgen Fischer
06:33 AM Bug report #9132: WMTS GetCapabilities actually asks for WMS
In fact, looking at the spec further, it seems the server should be returning a 400 error to that request. (InvalidPa... Jonathan Moules
06:32 AM Bug report #9132 (Closed): WMTS GetCapabilities actually asks for WMS
I've set my WMTS to use:
http://wppgeog3/geoserver/gwc/service/wmts
When I click "connect" it makes the following r...
Jonathan Moules
05:28 AM Bug report #8699: Context help - "?" in panel header all empty
maybe helpful?
http://stackoverflow.com/questions/81627/how-can-i-hide-delete-the-help-button-on-the-title-bar-of-a-...
Richard Duivenvoorde
05:03 AM Bug report #8699: Context help - "?" in panel header all empty
to help non windows users to understand the 'problem'.
see screenshot: as you can see there is both a help-button on...
Richard Duivenvoorde
03:08 AM Feature request #9129 (Open): Use columns aliases when doing a "save as..." of a layer/table with...
When doing a join and then saving the resulting layer/table with the "save as..." option, the joined column names are... Giovanni Manghi
02:02 AM Feature request #9124: Heatmap in percentage
Alternative for moving to core:
We could add the possibility to expose a python API from C++ plugins as well. I could...
Matthias Kuhn

2013-11-26

12:29 AM Bug report #9128 (Closed): wrong perimeter value in the identify feature tool
trying to calculate area and perimeter from a simple shapefile with CRS WGS84UTM32 following these steps:
1) set up t...
robert vech
12:17 AM Feature request #9094: Del-key should delete feature
More opinions:
https://github.com/ahuarte47/QGIS/commit/9f1395ea04cc0498535ac28d6779609be752c842#commitcomment-4713567
Alvaro Huarte
07:24 AM Feature request #9094: Del-key should delete feature
Giovanni Manghi wrote:
> > I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e....
Alvaro Huarte
07:14 AM Feature request #9094: Del-key should delete feature

> But please call me wrong :)
you can have a feature selected, as well as a node, at the same time, even of differe...
Giovanni Manghi
07:12 AM Feature request #9094: Del-key should delete feature
I'm not that deep into QGIS, but aren't both with an internal state?
* If feature is selected, delete it
* If a node ...
Noone Noone
07:12 AM Feature request #9094: Del-key should delete feature

> I wonder if 'delete a feature' should use "del" key and 'remove a node' user other key (e.g. Ctrl+Del).
> But it c...
Giovanni Manghi
06:48 AM Feature request #9094: Del-key should delete feature
Giovanni Manghi wrote:
> are we sure that this will not clash with the "del" action used by the node tool to delete s...
Alvaro Huarte
02:27 AM Feature request #9094: Del-key should delete feature
are we sure that this will not clash with the "del" action used by the node tool to delete selected nodes? :) Giovanni Manghi
03:26 PM Feature request #9127 (Closed): DBManager should show Postgres materialized views
Postgres 9.3 added support for materialized views. These are currently ignored by dbmanager and not shown in the tree... Nyall Dawson
01:38 PM Feature request #9124: Heatmap in percentage
It's actually not quite that simple - the maximum value is not known until the entire heatmap is generated, it can't ... Nyall Dawson
11:31 AM Bug report #9060 (Closed): Area is wrong in QGIS master (again)
Giovanni Manghi
11:11 AM Bug report #9060: Area is wrong in QGIS master (again)
Problem finally solved in QGIS nightly build commit:55f8606!
Cheers
Rhenriques Henriques
03:53 AM Feature request #9126 (Open): Extend layer window with toolbar
Currently tools that are related to the layer widget are only within the context menu of layers. This is bad, as
* th...
Noone Noone
03:14 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
That's fixed it.
And wow, this is awesome. Compare it to the ArcGIS WMTS implementation which is utterly awful and to...
Jonathan Moules
03:08 AM Bug report #9125 (Closed): Uninstalling weeklies
1) Installed "last" weeks weekly build (in my case QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe )
2) Uninstall manually fr...
Jonathan Moules
02:30 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Jeremy Palmer wrote:
> I've just seen this pull request. Dumb question, but why would you implement the user defined ...
Alvaro Huarte
02:11 AM Feature request #8725: Speed improvement in the render of geometries for qgis
I've just seen this pull request. Dumb question, but why would you implement the user defined
simplification setting...
Jeremy Palmer
02:25 AM Bug report #8920 (Feedback): DB Manager Fails to Load Raster | QGIS 2.0.1
Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr...
Giovanni Manghi
02:25 AM Bug report #8920 (Feedback): DB Manager Fails to Load Raster | QGIS 2.0.1
Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr...
Giovanni Manghi
02:25 AM Bug report #8920 (Feedback): DB Manager Fails to Load Raster | QGIS 2.0.1
Max Bohnet wrote:
> The error occures not only with raster tables but with all tables, that have a foreign key constr...
Giovanni Manghi

2013-11-25

11:20 PM Feature request #9124 (Rejected): Heatmap in percentage
Heatmaps would be far more convenient (easier to interpret in many contexts) if they could (optionally) be expressed ... Paolo Cavallini
11:01 PM Bug report #9097: Could't run the python script, when a multi-byte letter is included in file name
The patch should be:... Minoru Akagi
05:33 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
Support for such files added as http://trac.osgeo.org/gdal/ticket/5307 Even Rouault
05:33 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
Support for such files added as http://trac.osgeo.org/gdal/ticket/5307 Even Rouault
04:37 PM Bug report #9122 (Closed): DXF of Italian Cadastral Map not load
Qgis and ogr doesn't load the files DXF of italian cadastral system, it give a error as file malformed. (error is: ... SC SC
02:38 PM Feature request #9094: Del-key should delete feature
I propose this pull request:
https://github.com/qgis/QGIS/pull/1010
Alvaro Huarte
01:36 PM Bug report #8920: DB Manager Fails to Load Raster | QGIS 2.0.1
This bug is present in 2.1.0-Master (Debian Jessie amd64, Nightly build), and postgreSQL 9.3
Patch suggested by Max c...
C Daniel Sanchez R.
01:23 PM Feature request #9085: Set refresh to F5 key
Jürgen Fischer wrote:
> Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89".
Hi Jürgen, I seen your...
Alvaro Huarte
11:50 AM Feature request #9085: Set refresh to F5 key
Thank you both very much for fixing :) Noone Noone
11:47 AM Feature request #9085 (Closed): Set refresh to F5 key
Fixed in changeset commit:"32b05836d50b36f443517ef6a76ac26d49b19b89". Jürgen Fischer
08:56 AM Feature request #9085: Set refresh to F5 key
Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards
Alvaro Huarte
08:56 AM Feature request #9085: Set refresh to F5 key
Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards
Alvaro Huarte
08:56 AM Feature request #9085: Set refresh to F5 key
Pull request:
https://github.com/qgis/QGIS/pull/1008
Regards
Alvaro Huarte
09:59 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
Hi Jonathan, looking into the fix of jurgen, it seems there is was a missing default style.
So I thought to check th...
Richard Duivenvoorde
09:41 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
Thanks! I guess that'll be in tonight's weekly build? Jonathan Moules
09:20 AM Bug report #8401 (Closed): QGIS not able to access WMTS (GeoServer specific?)
Fixed in changeset commit:"c321f597fd814f963cc55ec3edfbe708fcf37a45". Jürgen Fischer
08:37 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
You can test with - http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?REQUEST=GetCapabilities Jonathan Moules
08:35 AM Bug report #8401 (Reopened): QGIS not able to access WMTS (GeoServer specific?)
Would this be in the build weekly QGIS-OSGeo4W-2.1.0-46-Setup-x86_64.exe - 18-Nov-2013 20:22 - number e882e47 from - ... Jonathan Moules
09:08 AM Bug report #9119: srs.db not closed (with OTF reprojection)
Thank you for the quick fix Marco.
It seems this can be closed.
Out of curiosity, is there a reason to have it open ...
Matthias Kuhn
06:01 AM Bug report #9119: srs.db not closed (with OTF reprojection)
it works :)
19 opened at the open of qgis
37 after opened my project... after a while down to 25
zoom... remain 25 a...
Luigi Pirelli
05:32 AM Bug report #9119 (Feedback): srs.db not closed (with OTF reprojection)
There was a missing delete / db close. However, it does not explain why the number of open db grows with every zoom.
...
Marco Hugentobler
04:23 AM Bug report #9119 (Open): srs.db not closed (with OTF reprojection)
Matthias Kuhn
03:42 AM Bug report #9119: srs.db not closed (with OTF reprojection)
I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day... Giovanni Manghi
03:42 AM Bug report #9119: srs.db not closed (with OTF reprojection)
I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day... Giovanni Manghi
03:42 AM Bug report #9119: srs.db not closed (with OTF reprojection)
I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day... Giovanni Manghi
03:42 AM Bug report #9119: srs.db not closed (with OTF reprojection)
I cannot add any technical detail but I can certainly confirm this issue as I have seen it many times in the last day... Giovanni Manghi
03:08 AM Bug report #9119: srs.db not closed (with OTF reprojection)
no... it's not my fault!
on fly repropjection open 12 /tmp/srs.db EVERY zoom or canvas redraw!
I don't know if it's...
Luigi Pirelli
02:41 AM Bug report #9119: srs.db not closed (with OTF reprojection)
hmmm... seems is related to my opened db by my new plugin
it's full of: /tmp/srs.db
generating 20 more every zoom!...
Luigi Pirelli
01:58 AM Bug report #9119 (Feedback): srs.db not closed (with OTF reprojection)
Can you run the following command when this happens next time, replacing [qgis-pid] with the actual pid
@ls -l /proc...
Matthias Kuhn
01:51 AM Bug report #9119 (Closed): srs.db not closed (with OTF reprojection)
Hi,
I have this erros during short time setting style o a spatialite layer. I don't know if this happend with other ...
Luigi Pirelli
03:40 AM Bug report #9110: Empty SAGA help
Yes Alexander, now i see one thing.
I use the #8259 to get html help and put in my folder of description inside of s...
João Gaspar
02:25 AM Bug report #9118 (Closed): Crash when using arrow key
https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-...
Matthias Kuhn
02:25 AM Bug report #9118 (Closed): Crash when using arrow key
https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/959722
it's a bug in qt-at-spi
@sudo apt-get remove qt-at-...
Matthias Kuhn

2013-11-24

12:27 AM Bug report #9110: Empty SAGA help
If I'm not wrong, we never have complete documentation. Also we decided to move all documentation outside Processing,... Alexander Bruy
12:17 AM Bug report #9114 (Closed): Ellipse renderer always draws black ellispes in combination with color...
Fixed in changeset commit:"c1d2798f47b7788f8b81eaf4b9f8707487f5919f". Matthias Kuhn
10:54 PM Bug report #6476 (Closed): data defined ellipse symbols on polygon centroid fill
This issue seems to be fixed. Matthias Kuhn
11:23 AM Bug report #9118: Crash when using arrow key
Error message:
_Warning: QSpiAccessible::accessibleEvent not handled: "8008" obj: QSidebar(0x6755c80, name = "sid...
Klas Karlsson
09:34 AM Bug report #9118 (Feedback): Crash when using arrow key
I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho...
Giovanni Manghi
09:34 AM Bug report #9118 (Feedback): Crash when using arrow key
I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho...
Giovanni Manghi
09:34 AM Bug report #9118 (Feedback): Crash when using arrow key
I cannot confirm it here, same platform, platform version and qgis version.
Can you post the error messages will sho...
Giovanni Manghi
08:06 AM Bug report #9118 (Closed): Crash when using arrow key
When I create a map and like to save it as an image I can type in a file name and get suggestions from already existi... Klas Karlsson
02:55 AM Feature request #9117 (Closed): Allow anomaly images for composition tests
While QgsRenderChecker allows for anomaly images, there's no similar feature in QgsCompositionChecker. Currently ther... Nyall Dawson
02:25 AM Bug report #4419: Improve random colour ramps
Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested...
Giovanni Manghi
02:25 AM Bug report #4419: Improve random colour ramps
Nyall Dawson wrote:
> Fixed in changeset commit:"f01206565847655d1caee64d342d999988c66491".
Hi Nyall,
I just tested...
Giovanni Manghi

2013-11-23

01:23 PM Bug report #9116 (Closed): Compile error: cannot find -lqgis_app
The QGIS compile for qgis-server use
give an error.
I'm using the today master trunk version
[ 99%] Built target qgi...
aperi2007 -
08:33 AM Bug report #9110: Empty SAGA help
One thing do you have the folder description inside of saga folder with html help?
Another thing that i can do is se...
João Gaspar
02:52 AM Bug report #9110: Empty SAGA help
Hum, on Linux "Reload" doesn't work with the Help of Pattern Analysis Filipe Dias
06:21 AM Bug report #9113 (Closed): Print converter: Map layer is not included when saved as image
Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel...
Giovanni Manghi
06:21 AM Bug report #9113 (Closed): Print converter: Map layer is not included when saved as image
Hi Veronika,
if you have questions/doubts the right place is the users/developers mailing list, the qgis irc channel...
Giovanni Manghi
03:59 AM Bug report #9114 (Closed): Ellipse renderer always draws black ellispes in combination with color...
In other renderers, it is possible to us color functions such as color_rgb( 100,255,255) to change the fill and outli... Anita Graser

2013-11-22

02:18 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Nyall Dawson wrote:
> Alvaro Huarte wrote:
>
> > Hi Nyall, I did not know this discussion!, I have involved in QGIS ...
Alvaro Huarte
01:05 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
> Hi Nyall, I did not know this discussion!, I have involved in QGIS later. Coincidences of lif...
Nyall Dawson
07:43 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Nyall Dawson wrote:
> Alvaro - these improvements look fantastic! Your hard work is much appreciated!
>
> One relate...
Alvaro Huarte
12:36 PM Feature request #9098: Offer a global OSM TMS as default map services
Basically yes. But IMHO we need to focus esp. beginners to GIS that just want to work with data. The consequence woul... Noone Noone
11:06 AM Feature request #9098: Offer a global OSM TMS as default map services
Have you tried the openlayers plugin? Are you looking for something similar? Antonio Locandro
12:32 PM Bug report #9110: Empty SAGA help
I confirm the help is incomplete. Another thing. After the fix if the help stay blank do right click and reload this ... João Gaspar
12:03 PM Bug report #9110: Empty SAGA help
I applied your fix but it didn't work. It may be possible that I tested algorithms with no help. Which ones did you t... Filipe Dias
11:54 AM Bug report #9110 (Reopened): Empty SAGA help
There's also no help on Linux (I thought there wasn't any). Filipe Dias
11:54 AM Bug report #9110 (Reopened): Empty SAGA help
There's also no help on Linux (I thought there wasn't any). Filipe Dias
01:42 AM Bug report #9110 (Closed): Empty SAGA help
João Gaspar
11:51 AM Feature request #4080: Html formatted labels
I agree this would be an useful feature, and also in combination with a WYSIWYG editor would make a powerful combo if... Antonio Locandro
11:49 AM Feature request #3832: add x y input to move
May I suggest also to add the possibility to choose the anchor point Antonio Locandro
11:43 AM Feature request #2724: Look for (like firefox)
I have been using the quick finder plugin for this, but this should be a core function of QGIS, hope this is added in... Antonio Locandro
11:23 AM Feature request #1539: Alphabetize "Files of type" drop down options
I think its more natural as user experience for you to look the alphabetical order of the first item of the list, in ... Antonio Locandro
11:10 AM Feature request #9085: Set refresh to F5 key
I think F5 as default is better since most users would expect that either from other software or from browser refresh... Antonio Locandro
02:39 AM Feature request #9085: Set refresh to F5 key
I see no issues setting it as default. Nathan Woodrow
02:38 AM Feature request #9085: Set refresh to F5 key
I agree that you can alter the shortcut on your own, but my request is esp. on (useful) defaults.
As always it's har...
Noone Noone
01:55 AM Feature request #9085: Set refresh to F5 key
Hi,
I believe that you can set it by yourself through Settings - Edit shortcuts. By the way, I just learned from you...
Jukka Rahkonen
11:04 AM Feature request #9094: Del-key should delete feature
I agree, I have been using QGIS for some time and didn't know you could just configure the shortcut to do that. By de... Antonio Locandro
08:37 AM Bug report #9113: Print converter: Map layer is not included when saved as image
Oh or if the map appears, it almost alway has a different zoom, so the map and the layers don´t fit together. That is... Veronika Zeu
08:12 AM Bug report #9113 (Closed): Print converter: Map layer is not included when saved as image
Hello!
I have following Problem (not sure if it's a bug or I just messed it up, though).
I am trying to save part of...
Veronika Zeu
07:16 AM Bug report #9112 (Closed): QGIS master crashes on Linux when editing Spatialite layers with OTFR on
Open the layers in the attached SL db (you may want to use the attached project), then activate OTFR and try edit one... Giovanni Manghi
07:01 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master

> On the other hand on Linux it crashes (but may not be related).
On Linux qgis master crashes, qgis 2.0 does not ...
Giovanni Manghi
06:55 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
ok great, thanks for looking into that! Brian Freed
06:53 AM Bug report #8451 (Open): "Transform error caught: forward transform of..." while editing on qgis ...
Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64...
Giovanni Manghi
06:53 AM Bug report #8451 (Open): "Transform error caught: forward transform of..." while editing on qgis ...
Brian Freed wrote:
> I just reinstalled, but it's reporting the same version.
>
> I'm using the osgeo4w-setup-x86_64...
Giovanni Manghi
05:13 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
I just reinstalled, but it's reporting the same version.
I'm using the osgeo4w-setup-x86_64.exe installer. The inst...
Brian Freed
02:10 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Matthias Kuhn wrote:
> There have been a couple of recent updates in this area. Could you already check if this fixes...
Giovanni Manghi
05:55 AM Bug report #6476: data defined ellipse symbols on polygon centroid fill
Works for me too now! And I could even fill the ellipse colour using a text field containing values like #54f7b8.
I'...
Raymond Nijssen
02:18 AM Bug report #9088: Text Annotation Symbols size is wrong in map composer
Hello Giovanni
I downloaded Master on 21 November.
The text annotation symbol problem is the same as that on stable v...
Geoff Owen
02:01 AM Bug report #9082: Failure to display getfeatureinfo results from mapserver 5.6
Why not to make InfoFormat selectable in the WMS server settings? As Mapserver administrator I know it is very hard t... Jukka Rahkonen
01:55 AM Feature request #9096 (Closed): QGIS 2.0.1 Atlas generation not keeping the fill styles
Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g...
Giovanni Manghi
01:55 AM Feature request #9096 (Closed): QGIS 2.0.1 Atlas generation not keeping the fill styles
Surag Kulkarni wrote:
> Hi
> Sorry for not adding the screenshots and more details.
> QGIS 2.0.1 output using atlas g...
Giovanni Manghi
01:41 AM Bug report #7226 (Closed): All attempts to specify a project, layer or default coordinate referen...
closing for lack of feedback. Giovanni Manghi
01:41 AM Bug report #7226 (Closed): All attempts to specify a project, layer or default coordinate referen...
closing for lack of feedback. Giovanni Manghi

2013-11-21

12:50 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Nyall Dawson wrote:
> Here's some more string updates for this latest addition:
>
> "By default simplify geometries"...
Alvaro Huarte
12:37 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro - these improvements look fantastic! Your hard work is much appreciated!
One related idea I was planning on i...
Nyall Dawson
12:13 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Here's some more string updates for this latest addition:
"By default simplify geometries" -> "Simplify geometries b...
Nyall Dawson
06:23 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi,
I release a new windows installer which contains:
* Patch #8725 of QGIS (https://github.com/qgis/QGIS/pull/980...
Alvaro Huarte
03:30 PM Feature request #8725: Speed improvement in the render of geometries for qgis
regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra...
Alvaro Huarte
07:40 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > > Anyone else noticed something similar?
> >
> > can you try remov...
Alvaro Huarte
06:43 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Giovanni Manghi wrote:
> > Anyone else noticed something similar?
>
> can you try remove the layers (one by one) fro...
Alvaro Huarte
05:11 AM Feature request #8725: Speed improvement in the render of geometries for qgis

> Anyone else noticed something similar?
can you try remove the layers (one by one) from your project and see if yo...
Giovanni Manghi
05:04 AM Feature request #8725: Speed improvement in the render of geometries for qgis
rph - wrote:
> Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layer...
Alvaro Huarte
11:42 PM Bug report #8526: complex/big geometry crashes qgis 32bit on load. Works ok on qgis 64 bit and Li...
May be related to the old Qt version shipped on windows 32 bit. Matthias Kuhn
11:35 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
There have been a couple of recent updates in this area. Could you already check if this fixes the problems? Matthias Kuhn
12:17 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
just saw your post #11 - we must have passed each other. Yeah, I'll go ahead and update - probably tomorrow Brian Freed
12:14 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
ah, gotcha. I was afraid I'd done something stupid. Thanks Brian Freed
12:12 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs l...
Giovanni Manghi
12:11 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
I'm trying to set the project to a non-user projection now, but I'm getting a bunch of dialogs like 'Select datum tra... Brian Freed
12:06 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing ...
Giovanni Manghi
12:04 PM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> If you start a fresh QGIS session and just load in all the layers, does it still crash?
> (tryin...
Giovanni Manghi
11:58 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
If you start a fresh QGIS session and just load in all the layers, does it still crash?
(trying to figure out if it's...
Brian Freed
11:54 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
my files were created with qgis-dev - version commit:e882e47, from 11/18. That's the same thing as Master, right? (ot... Brian Freed
10:33 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible....
Giovanni Manghi
10:33 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible....
Giovanni Manghi
10:33 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Brian Freed wrote:
> Sorry for the delay, I couldn't send the client's files.
>
> But I finally got it reproducible....
Giovanni Manghi
10:23 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
footnote:
I was back on the same site all day yesterday & this morning, and can confirm that file performance degrade...
Brian Freed
10:19 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number...
Brian Freed
10:19 AM Bug report #8451: "Transform error caught: forward transform of..." while editing on qgis master
Sorry for the delay, I couldn't send the client's files.
But I finally got it reproducible. See attached. I number...
Brian Freed
11:33 PM Bug report #8707: Doens't load most of the layers.
you need to
@from PyQt4.QtCore import [email protected]
or just import all the important PyQt stuff
@from PyQt4.QtCore im...
Matthias Kuhn
11:25 PM Bug report #7226: All attempts to specify a project, layer or default coordinate reference system...
Is this still an issue for somebody? Matthias Kuhn
11:24 PM Bug report #8269 (Closed): QgsDataProvider.changeAttributeValues() causes memory error when calle...
This works with QGIS 2.0 (And there is no more data type QVariant in PyQT...) And as it seems, it's easy to work arou... Matthias Kuhn
11:20 PM Bug report #8182 (Closed): Broken support for FileGDB
This issue has been reported against a development version and not seen any updates for several months, so I assume i... Matthias Kuhn
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
03:14 PM Feature request #9096: QGIS 2.0.1 Atlas generation not keeping the fill styles
Hi
Sorry for not adding the screenshots and more details.
QGIS 2.0.1 output using atlas generation does not print Lab...
Surag Kulkarni
05:45 AM Feature request #9096 (Feedback): QGIS 2.0.1 Atlas generation not keeping the fill styles
When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can...
Giovanni Manghi
05:45 AM Feature request #9096 (Feedback): QGIS 2.0.1 Atlas generation not keeping the fill styles
When you say "transparency" are you referring to the one of the coverage layer? if yes, it is working ok here.
I can...
Giovanni Manghi
02:16 PM Bug report #9110: Empty SAGA help
I find the bug. :)
In the folder .qgis2/python/plugins/processing/saga on the SagaAlgorithm.py in line 508 substitu...
João Gaspar
01:49 PM Bug report #9110 (Closed): Empty SAGA help
*Win 7 64-bit / OSGeo Installer 32-bit
Plugin Processing Version: 2.0-20131120*
_QGIS version 2.0.1-Dufour QGIS code...
João Gaspar
12:02 PM Bug report #9107: remove GRASS nviz from modeller
Yes i agree. My first idea was create a automatic workflow starting with vector contour lines > interpolation > NVIZ.... João Gaspar
11:10 AM Bug report #9107: remove GRASS nviz from modeller
When adding nviz in a model the following pyhton error shows.
Probably it would be better to remove nviz from the mo...
Giovanni Manghi
10:50 AM Bug report #9107: remove GRASS nviz from modeller
When i say small is simple: 1 raster (elevation) and 1 raster (color) and the algorithm NVIZ
Yes but only with the i...
João Gaspar
09:50 AM Bug report #9107: remove GRASS nviz from modeller
can you share the model? Giovanni Manghi
08:21 AM Bug report #9107 (Closed): remove GRASS nviz from modeller
Hi there,
I test a small model using NVIZ as my final algorithm. When try to use the NVIZ in model of the modeler g...
João Gaspar
10:45 AM Bug report #9108 (Closed): Datum transformation dialog shows also when adding geometryless layers...
in qgis master when I add (example) a csv as a table, the datum transformation dialog shows (I guess it should not). Giovanni Manghi
07:17 AM Bug report #9101: Raster artefact in composer pdf export
It seems that if there are NULL values in the raster a mask representing those values (transparent) is written to PDF... Radim Blazek
06:37 AM Bug report #8996 (Closed): Composer crashes QGIS when setComposition() method called
Thanks, Matthias! Making composition a class variable solves this issue. Alexander Bruy
03:54 AM Bug report #8996 (Feedback): Composer crashes QGIS when setComposition() method called
Alex, did you try to assign the composition to a class variable instead of a local variable so it does not get garbag... Matthias Kuhn
06:36 AM Bug report #9102: Distance matrix wrong under processing
I also see this issue with the standard N x T distance matrix.
The linear distance matrix seems to works ok.
The su...
Giovanni Manghi
03:51 AM Bug report #7228 (Closed): Incorrect return on boundingbox one-liner
Matthias Kuhn
03:49 AM Bug report #6547 (Closed): QGIS segfaults when using Qgsvectorlayer.select() inside geometryChang...
Closed due to lack of feedback.
Please reopen if required and add any data/info that may have been requested.
Matthias Kuhn
03:41 AM Bug report #8224 (Closed): QGIS closes when selecting the 'about' option in the help menu
Closed due to lack of feedback.
Please reopen and provide requested details if this problem is still an issue.
Matthias Kuhn
03:35 AM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
hagit Wiener wrote:
> I'm having the same problem.
> Downloaded the latest version of Qgis earlier this month. What i...
Giovanni Manghi
01:22 AM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
I'm having the same problem.
Downloaded the latest version of Qgis earlier this month. What is the OGR?
hagit Wiener
03:29 AM Bug report #8617 (Closed): Crashes when switching layers
Closing due to lack of feedback.
Please reopen (with added details) if this still is an issue.
Matthias Kuhn
02:39 AM Bug report #6476 (Feedback): data defined ellipse symbols on polygon centroid fill
Works for me on a recent master build. Is this issue solved or am I testing the wrong thing? Matthias Kuhn

2013-11-20

07:11 PM Bug report #9106 (Closed): There is no equivalent to setGrayBand for QgsSingleBandPseudoColorRend...
I have been struggling with multiband rasters for some time. I wish to iterate through the multiband raster that I h... aaron davis
04:30 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi, I've tested this on Win7 64 bit with a previous project containing several raster and vector layers. Surprinsingl... Rui Pedro Henriques
02:23 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Nyall Dawson wrote:
> Can I suggest some improvements in the strings?
>
> "Fast drawing" -> "Simplify geometry"
>
>...
Alvaro Huarte
01:06 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Can I suggest some improvements in the strings?
"Fast drawing" -> "Simplify geometry"
"Note ..." -> "Note: Enabling...
Nyall Dawson
06:34 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Yeah really good. Describes perfectly the situation. =)
Regards
João Gaspar
04:01 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
>
> Hi João,
> I added a warning label that appears when the user increases the simplification ...
Alvaro Huarte
02:32 AM Feature request #8725: Speed improvement in the render of geometries for qgis
regis Haubourg wrote:
> Hi Alvaro, I tested your windows package, this is huge! Many thanks...
> As a GIS administra...
Alvaro Huarte
02:25 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
> João Gaspar wrote:
> > My feedback:
> >
> > *OS: Windows 7 64-bits
> > Processor: Intel(R) Co...
Alvaro Huarte
02:14 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi Alvaro, I tested your windows package, this is huge! Many thanks...
As a GIS administrator, I would need a genera...
Regis Haubourg
01:43 PM Bug report #9103 (Closed): Error downloading OSM data
Matthias Kuhn
11:39 AM Bug report #9103 (Closed): Error downloading OSM data
Hi, QGIS 2.0 introduces a new OSM tool that allows to get the corresponding area of a layer directly from OSM and sto... Noone Noone
10:47 AM Bug report #9099 (Closed): QGIS reads all features twice - opening CSV attribute table
Fixed in changeset commit:"584aba7672e1c000a031de750713cd9a8e58ca8d". Matthias Kuhn
09:14 AM Bug report #9099: QGIS reads all features twice - opening CSV attribute table
confirmed here, does not happen if the csv is imported as point layer. Giovanni Manghi
03:17 AM Bug report #9099 (Closed): QGIS reads all features twice - opening CSV attribute table
Using the "stops.csv" file from this zip - http://www.dft.gov.uk/NaPTAN/snapshot/NaPTANcsv.zip
1) Drag file into QGI...
Jonathan Moules
10:33 AM Feature request #7878: Windows 8 Location Provider GPS Support
Miroslav try use higher COM port (4 or 5). Many users of Centrafuse Localizer have a problem on some navigation syste... Seb Radzimski
07:20 AM Bug report #9102 (Closed): Distance matrix wrong under processing
*New description:*
N x T distance matrix is created without errors in Processing but output is wrong, see attached f...
Jonathan Moules
07:14 AM Bug report #9100: Processing Distance Matrix tool not working
Have downloaded the 2.1 weekly and "standard" is still broken, though in a slightly different way. "Linear" is also s... Jonathan Moules
04:17 AM Bug report #9100: Processing Distance Matrix tool not working
Alexander Bruy wrote:
> Go to "Projects" page and you will see all available trackers. If you post bug in wrong track...
Jonathan Moules
04:13 AM Bug report #9100: Processing Distance Matrix tool not working
Jonathan Moules wrote:
> b) How many trackers are there for all of the components of QGIS? How is a user supposed to ...
Alexander Bruy
04:07 AM Bug report #9100: Processing Distance Matrix tool not working
This is the Processing's bug tracker. I believe the idea is to clean the current Processing bugtracker and then merge... Filipe Dias
04:05 AM Bug report #9100: Processing Distance Matrix tool not working
Alexander Bruy wrote:
> Works in master.
>
> Please, don't post Processing issues in QGIS tracker!
a) There is a "P...
Jonathan Moules
03:56 AM Bug report #9100 (Closed): Processing Distance Matrix tool not working
Works in master.
Please, don't post Processing issues in QGIS tracker!
Alexander Bruy
03:56 AM Bug report #9100 (Closed): Processing Distance Matrix tool not working
Works in master.
Please, don't post Processing issues in QGIS tracker!
Alexander Bruy
03:50 AM Bug report #9100: Processing Distance Matrix tool not working
Due to proxy issues I can't access the plugin installer. Sorry. Jonathan Moules
03:49 AM Bug report #9100: Processing Distance Matrix tool not working
Can you also test with a more recent code revision? It's available via the Plugin Installer. Filipe Dias
03:44 AM Bug report #9100 (Closed): Processing Distance Matrix tool not working
1) Add the attached "points" shapefile.
2) Use the Processing toolbox Distance Matrix - configure as attached screens...
Jonathan Moules
07:13 AM Bug report #9101 (Closed): Raster artefact in composer pdf export
When exporting composer with raster image to pdf it leaves an artefact around the edge of the image.
See attached ra...
Michael Spencer
06:18 AM Bug report #9093 (Feedback): .CSV files don't get in editmode anymore
If you add the CSV as table, then is editable, if you add it as a point layer then it is not. I believe that is a ogr... Giovanni Manghi
06:12 AM Bug report #9089 (Closed): Data-defined symbol color very slow in 2.0 release
Giovanni Manghi
04:35 AM Bug report #7643: Empty console Output on R, under SEXTANTE
Hello everyone,
It seems the R has a package R2HTML that convert the R objects to HTML.
http://cran.r-project.org/w...
João Gaspar
03:05 AM Feature request #9094: Del-key should delete feature
IMHO it should be set by default. Think on yourself from an enduser POV, how often do you alter the shortcuts of an a... Noone Noone
02:57 AM Feature request #9094: Del-key should delete feature
it can be configured in "configure shortcuts" panel, but anyway I guess that it could be configured by default. Giovanni Manghi
02:59 AM Bug report #9088: Text Annotation Symbols size is wrong in map composer
I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th... Giovanni Manghi
02:59 AM Bug report #9088: Text Annotation Symbols size is wrong in map composer
I'll tag this a regression, meanwhile can you test QGIS master and see if by any chance this has been fixed there? th... Giovanni Manghi
02:41 AM Feature request #9098 (Open): Offer a global OSM TMS as default map services
More and more novice users join GIS even due to open data (encouraged citizens...datajournalists) and QGIS is one of ... Noone Noone
01:29 AM Bug report #9097 (Closed): Could't run the python script, when a multi-byte letter is included in...
When run the python script which multi-byte letter is contained file name from python console editor, I/O error occur... kosuke ASAHI

2013-11-19

05:31 PM Feature request #9096 (Closed): QGIS 2.0.1 Atlas generation not keeping the fill styles
HI
Previously I have used the same QGIS project for V1.8 with Atlas plugin. The maps were created well and very satis...
Surag Kulkarni
04:55 PM Bug report #9095 (Closed): Shape file points not appearing in 2.0.1
Well I accidentally found the solution to my problem. I found that there was a point in the attribute table that had ... Daniel Kranich
04:36 PM Bug report #9095 (Closed): Shape file points not appearing in 2.0.1
I have a shape file that is a point layer which has been working fine and displaying fine in 1.8. When I open the lay... Daniel Kranich
01:56 PM Bug report #9089: Data-defined symbol color very slow in 2.0 release
Sorry, I've found that was a Qt 4.7 bug : ... Nicolas Liaudat
09:53 AM Bug report #9089: Data-defined symbol color very slow in 2.0 release
tagging as regression. Giovanni Manghi
09:53 AM Bug report #9089: Data-defined symbol color very slow in 2.0 release
tagging as regression. Giovanni Manghi
05:42 AM Bug report #9089 (Closed): Data-defined symbol color very slow in 2.0 release
Hi,
Data-defined symbol color is very slow on 2.0 release cause a lot of Qt warnings appears :
@QColor::setNamedC...
Nicolas Liaudat
01:24 PM Bug report #9092: Use last display to display window
I confirm this issue on 12.04. QGIS always launches on the second window of the workspace. The user has to open the w... Filipe Dias
10:56 AM Bug report #9092 (Closed): Use last display to display window
Currently QGIS 2.0 shows the main window every time on a different window at startup. That causes strange effects as ... Noone Noone
12:52 PM Bug report #9088: Text Annotation Symbols size is wrong in map composer
Hello
Text annotation symbols worked fine with QGIS 1.8.
Size of symbol on map canvas was the same on map composer.
T...
Geoff Owen
09:51 AM Bug report #9088 (Feedback): Text Annotation Symbols size is wrong in map composer
do you have any evidence if this was working the right way in qgis 1.8? Giovanni Manghi
09:51 AM Bug report #9088 (Feedback): Text Annotation Symbols size is wrong in map composer
do you have any evidence if this was working the right way in qgis 1.8? Giovanni Manghi
05:20 AM Bug report #9088 (Closed): Text Annotation Symbols size is wrong in map composer
I am able to add text annotaion to map canvas without any problem.
Problem arises when going to map composer.
Text an...
Geoff Owen
12:07 PM Feature request #8725: Speed improvement in the render of geometries for qgis
João Gaspar wrote:
> Ahaha. ;)
>
> In the minimum level don't appear gaps is "clean and smooth". ;)
>
> Only appear...
Alvaro Huarte
09:29 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Ahaha. ;)
In the minimum level don't appear gaps is "clean and smooth". ;)
Only appears when i increase the slider ...
João Gaspar
08:51 AM Feature request #8725: Speed improvement in the render of geometries for qgis
João Gaspar wrote:
> Sorry my English sometimes tricks me. :p
>
> I don't understand what you want to say with "not ...
Alvaro Huarte
08:40 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Sorry my English sometimes tricks me. :p
I don't understand what you want to say with "not appear in the scroll at l...
João Gaspar
06:39 AM Feature request #8725: Speed improvement in the render of geometries for qgis
João Gaspar wrote:
> My feedback:
>
> *OS: Windows 7 64-bits
> Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz ...
Alvaro Huarte
11:55 AM Bug report #9084: Mean coordinates-feature fails with negative weights
Yes, it just works with positive values :) Noone Noone
09:53 AM Bug report #9084 (Feedback): Mean coordinates-feature fails with negative weights
> Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right?
Giovanni Manghi
09:53 AM Bug report #9084 (Feedback): Mean coordinates-feature fails with negative weights
> Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right?
Giovanni Manghi
09:53 AM Bug report #9084 (Feedback): Mean coordinates-feature fails with negative weights
> Calculating mean coordinates require negative weigths per definition.
do you mean "does not require", right?
Giovanni Manghi
03:39 AM Bug report #9084 (Closed): Mean coordinates-feature fails with negative weights
Calculating mean coordinates require negative weigths per definition.
The QGIS 2.0 feature sadly doesn't check nor no...
Noone Noone
11:45 AM Feature request #9094 (Closed): Del-key should delete feature
Most users would expect that Del key will erase the current selected feature, if you are in edit mode. Please fullfil... Noone Noone
11:17 AM Bug report #9093 (Closed): .CSV files don't get in editmode anymore
Hi, even if I worked with .CSV files already in QGIS 2.0 I now somehow managed to get my instance not allowing to go ... Noone Noone
10:29 AM Bug report #9082: Failure to display getfeatureinfo results from mapserver 5.6
Here is an example of what works for me both in 2.0.1 and current master:... Radim Blazek
10:17 AM Bug report #9082: Failure to display getfeatureinfo results from mapserver 5.6
'msGMLOutput' is OK. I don't see anything wrong in the response.
Current master can display parsing error with possi...
Radim Blazek
09:55 AM Bug report #9082 (Feedback): Failure to display getfeatureinfo results from mapserver 5.6
Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,...
Giovanni Manghi
09:55 AM Bug report #9082 (Feedback): Failure to display getfeatureinfo results from mapserver 5.6
Radim, as you worked on this matters recently, can you add a comment? this should be fixed in master, right?
Landry,...
Giovanni Manghi
02:47 AM Bug report #9082 (Closed): Failure to display getfeatureinfo results from mapserver 5.6
Tried on OpenBSD and Windows 7, with QGIS 2.0.1. (1.8.0 works fine but queries INFO_FORMAT=text/plain)
If i query a ...
landry Landry Breuil
10:14 AM Bug report #9078: Labels are truncated in printing
Even worse then Paolo Cavallini
08:00 AM Bug report #9078: Labels are truncated in printing
are you sure, it's related to Atals use case?
I have labels truncated also in static printing and main Mapcanvas.
Regis Haubourg
09:29 AM Bug report #9091 (Feedback): Field calculator toolbar item disabled in edit mode
Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t...
Giovanni Manghi
09:29 AM Bug report #9091 (Feedback): Field calculator toolbar item disabled in edit mode
Jürgen Fischer wrote:
> apparently master is not affected, but it's reproducable on 2.0.1
then closing as usual in t...
Giovanni Manghi
08:31 AM Bug report #9091: Field calculator toolbar item disabled in edit mode
apparently master is not affected, but it's reproducable on 2.0.1 Jürgen Fischer
07:16 AM Bug report #9091: Field calculator toolbar item disabled in edit mode
The button needs to follow the same states as the button at the attribute table (consistency).
Enabling edit-mode c...
Noone Noone
06:39 AM Bug report #9091: Field calculator toolbar item disabled in edit mode
What do you suggest?
Personally, I think it would be nice if clicking on the toolbar's Field Calculator activated th...
Filipe Dias
06:23 AM Bug report #9091 (Closed): Field calculator toolbar item disabled in edit mode
The Field calculator button in toolbar is disabled when switching in editmode of a vector layer. You need to go Attri... Noone Noone
06:17 AM Feature request #9090 (Open): Move 'add layers' to file menu
Currently the Layer menu includes a lot of stuff, so on medium size displays as laptops the menu gets scrollbars (see... Noone Noone
04:45 AM Bug report #9087 (Closed): Resizing log window causes massive map updates
Duplicates #2798 Borys Jurgiel
04:45 AM Bug report #9087 (Closed): Resizing log window causes massive map updates
Duplicates #2798 Borys Jurgiel
04:01 AM Bug report #9087 (Closed): Resizing log window causes massive map updates
If you resize the log window (because you might want to see if there occurs something strange), QGIS will try to do a... Noone Noone
04:37 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Alexander Bruy wrote:
> Seems the only possible way to get broken attributes is using "System" encoding when saving ...
Filipe Dias
03:56 AM Feature request #9086 (Open): Field calculater doesn't automaticly detect result datatype and pre...
Currently the calculator asks the user to fill in the expected result. As this is on the very top and the user might ... Noone Noone
03:41 AM Feature request #9085 (Closed): Set refresh to F5 key
Most tools use F5 key to refesh it's screen/data. It would be nice, if also QGIS would follow this standard, as this ... Noone Noone
03:31 AM Feature request #9083 (Open): Make contextmenus context aware
In #9072 I refer to some problems in UI design. As the team wished more specific suggestions, I like to discuss on ho... Noone Noone
02:31 AM Bug report #9081 (Closed): Raster calculator result is not accurate
When using the raster calculator with this simple example:
@layer1 / 10
the results do not come out as expected. W...
Tim Sutton
01:56 AM Bug report #9070: +towgs84 wrongly ignored when OTF reprojection is on and project CRS is WGS84 P...
Marco, thanks, glad this was uncovered and fixed early on :) Mathieu Pellerin - nIRV
01:31 AM Feature request #8358: The composer should retry more than one time the retrieve of a tile from a...
Given that master now has the global option "Max retry in case of tile request errors", can this issue be closed now? Nyall Dawson
01:29 AM Bug report #8214 (Closed): [Composer] Snap to grid / selection tolerance strange behaviour
Fix has been in master for some time -- I'm not sure why this didn't auto-close. Nyall Dawson
01:29 AM Bug report #8214 (Closed): [Composer] Snap to grid / selection tolerance strange behaviour
Fix has been in master for some time -- I'm not sure why this didn't auto-close. Nyall Dawson
01:26 AM Feature request #8999 (Closed): Rotate scale bar
Duplicate of #4884 - a fix is in progress. Nyall Dawson
01:26 AM Feature request #8999 (Closed): Rotate scale bar
Duplicate of #4884 - a fix is in progress. Nyall Dawson
01:20 AM Feature request #7234 (Closed): Copy and paste in the composer should remember position
Paste in Place has been in master for some time now - I think it's safe to close this request. Nyall Dawson
01:20 AM Feature request #7234 (Closed): Copy and paste in the composer should remember position
Paste in Place has been in master for some time now - I think it's safe to close this request. Nyall Dawson

2013-11-18

12:56 AM Feature request #8766: Atlas current feature filter
here is what I see:
Version de QGIS 2.0.1-Dufour Révision du code ebebdf3
Compilé avec Qt 4.7.1 Utilisant Qt 4.7.1
...
Regis Haubourg
12:58 PM Feature request #8766: Atlas current feature filter
Can you paste a image of your about QGIS dialog. Nathan Woodrow
08:29 AM Feature request #8766: Atlas current feature filter
Ok, didn't know that. Anyway, it seems nathan's code is not functionnal in 32 bit package. Maybe other reasons explai... Regis Haubourg
08:01 AM Feature request #8766: Atlas current feature filter
regis Haubourg wrote:
> In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version.
Right, bu...
Jürgen Fischer
07:36 AM Feature request #8766: Atlas current feature filter
In my 32 bit osgeo4w installer, I get 2.1.0-55 where I get -60 in 64 bits version. Regis Haubourg
07:04 AM Feature request #8766: Atlas current feature filter
regis Haubourg wrote:
> Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60
What do you mean? The p...
Jürgen Fischer
05:43 AM Feature request #8766: Atlas current feature filter
Hum, in fact 32 bit package is realy old, 64 bit is up to 2.1.0-60 Regis Haubourg
05:41 AM Feature request #8766: Atlas current feature filter
Yep, updated osgeo4w 64 bit today. Will check 32 bit now... Regis Haubourg
05:28 AM Feature request #8766: Atlas current feature filter
Very old. Are you using the OSGeo4W of the qgis site? Nathan Woodrow
05:22 AM Feature request #8766: Atlas current feature filter
Hi Nathan,
I can't see $currentfeature variable in latest revision on OSGEO4W (5f5cd4c) , with Atlas enabled..
Any ...
Regis Haubourg
10:34 PM Bug report #9080: GdalTools (QGIS 2.0.1) fail if file path includes non-ascii characters
Another solution is here! in qgis.bat ("qgis.bat.tmpl":https://github.com/qgis/QGIS/blob/master/ms-windows/osgeo4w/qg... Minoru Akagi
05:35 PM Bug report #9080 (Closed): GdalTools (QGIS 2.0.1) fail if file path includes non-ascii characters
This problem was fixed once in 1.9 (commit:8970a1f), but it was affected by commit:c9eb4f2 I made to fix an issue #80... Minoru Akagi
11:25 AM Bug report #9079 (Closed): Numeric scale error when print
Hello,
There is an error in the numeric scale in the map composer. For example, if we print with a scale of 1:20 000...
Stéphane Prescott
08:34 AM Bug report #9078 (Closed): Labels are truncated in printing
Labels for items other that the current (focused) one can be truncated in the output.
I assume this means Atlas gener...
Paolo Cavallini
07:56 AM Feature request #8725: Speed improvement in the render of geometries for qgis
My feedback:
*OS: Windows 7 64-bits
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz 2.4GHz
RAM: 4.00Gb*
*QGIS ...
João Gaspar
04:53 AM Bug report #9070 (Closed): +towgs84 wrongly ignored when OTF reprojection is on and project CRS i...
Fixed in changeset commit:"51006cea1f2959b0e659a8ee07577632dc3c2753". Marco Hugentobler

2013-11-17

12:42 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
> This up guys! :-)
>
> My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#commen...
Giovanni Manghi
04:37 PM Feature request #8725: Speed improvement in the render of geometries for qgis
This up guys! :-)
My proposed pull request (http://trac.osgeo.org/gdal/ticket/5272#comment:7) in GDAL-OGR library fo...
Alvaro Huarte
12:29 AM Bug report #9076 (Closed): Properties of a group of composer items cannot be edited
When creating a group of composer items, it is not possible to edit its ID with the composer UI.
That could be useful...
Hugo Mercier
10:36 PM Feature request #5742: Preserve GRASS raster labels
I think more work has to be done on the Processing side, to add these options to the export command. Paolo Cavallini
07:48 AM Feature request #5742 (Feedback): Preserve GRASS raster labels
Paolo Cavallini wrote:
> From Markus Metz, GRASS mailing list:
> ===
> An alternative would be to make use of the GDA...
Giovanni Manghi
09:49 PM Feature request #7878: Windows 8 Location Provider GPS Support
Would be great. I tried today trial of third party software (Centrafuse Localizer) with QGIS 2.0.1, which supposed to... Miroslav Umlauf
03:42 PM Bug report #9011 (Closed): PostGis 2.1.0 deprecated signature
Fixed in changeset commit:"99cee10cf96314ae911a6d8b99d6a43015a3cf83". Jürgen Fischer
01:47 PM Bug report #9075 (Closed): PostGIS >= 2.1 fill logs with "ST_Estimated_Extent signature was depre...
duplicate of #9011 Jürgen Fischer
01:47 PM Bug report #9075 (Closed): PostGIS >= 2.1 fill logs with "ST_Estimated_Extent signature was depre...
duplicate of #9011 Jürgen Fischer
01:38 PM Bug report #9075 (Closed): PostGIS >= 2.1 fill logs with "ST_Estimated_Extent signature was depre...
@2013-11-16 13:55:03 MST WARNING: ST_Estimated_Extent signature was deprecated in 2.1.0. Please use ST_EstimatedExte... Donovan Cameron
01:58 AM Bug report #5954: v.distance does not list existing columns, possibly broken?

> I would suggest also remove the "-a" parameter (Calculate distances to all features within the threshold), from v....
Giovanni Manghi
01:36 AM Bug report #5954: v.distance does not list existing columns, possibly broken?
Victor Olaya wrote:
> it works here (the algorithm executes), although the results are empty... One of the things thi...
Giovanni Manghi
01:10 AM Bug report #5954: v.distance does not list existing columns, possibly broken?
Markus Neteler - wrote:
> Perhaps 6.4.3 will address that: http://trac.osgeo.org/grass/log/grass/branches/releasebran...
Giovanni Manghi

2013-11-16

12:59 AM Bug report #9059 (Closed): Qgis crashes when using identify or opening raster properties, when OT...
iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it...
Giovanni Manghi
12:59 AM Bug report #9059 (Closed): Qgis crashes when using identify or opening raster properties, when OT...
iacopo zetti wrote:
> What I have to do in this situation; I have to share project and data or not?
no, just do it...
Giovanni Manghi
12:57 PM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
I opened again today two of the project that caused the problem and now (after a new upgrade) no problem. Apparently ... iacopo zetti
04:44 PM Bug report #9070: +towgs84 wrongly ignored when OTF reprojection is on and project CRS is WGS84 P...
Marco,
I *think* the indian 1960 48n layer is the one being misplaced/misprojected, based on fact that if you load t...
Mathieu Pellerin - nIRV
08:45 AM Bug report #9070: +towgs84 wrongly ignored when OTF reprojection is on and project CRS is WGS84 P...
Maybe a problem with the null grid parameter that is removed now. Looking into that problem on Monday.
Do know which ...
Marco Hugentobler
03:59 PM Feature request #9072: Care about usability
noone noone wrote:
> I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have ...
Nathan Woodrow
12:53 PM Feature request #9072: Care about usability
I see, but as IMHO the most users lack also of time to track mailinglist discussions (they have also to work and crea... Noone Noone
12:42 PM Feature request #9072 (Closed): Care about usability
That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We... Jürgen Fischer
12:42 PM Feature request #9072 (Closed): Care about usability
That we don't care about the usablity is simply wrong. There have been countless UI improvements over the years. We... Jürgen Fischer
09:42 AM Feature request #9072: Care about usability
Antonio Locandro wrote:
> invest
that is the key word. Invest in QGIS and good thing happens. Don't invest, then yo...
Giovanni Manghi
09:34 AM Feature request #9072: Care about usability
Maybe the tone is not there, but the spirit is. At some point some time should be invested to improve UI/UX. For exam... Antonio Locandro
07:52 AM Feature request #9072: Care about usability
I'm sorry if I missed the tone. Maybe this is due because I really expected more things to be done on UX on a major u... Noone Noone
04:48 AM Feature request #9072: Care about usability
I don't really like that this ticket creates a tone that we don't care about usability. We are always happen to impr... Nathan Woodrow
03:59 AM Feature request #9072 (Closed): Care about usability
Even if QGIS 2.0 should addressed usability corresponding to the roadmap, the current user experience seems to be bad... Noone Noone
12:38 PM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
Hello All,
maybe we could put together this issue and what I suggest in #9050 and also in PR https://github.com/qgis...
jtornero -
10:21 AM Bug report #9071: Filter queries ignore ""
noone noone wrote:
> If you do that please explain people what you expect them todo. Maybe ad"ing an grayed out expla...
Jürgen Fischer
07:44 AM Bug report #9071: Filter queries ignore ""
Related #8893 which is about more prominent warnings for expression errors. This should be the way to go. Matthias Kuhn
07:39 AM Bug report #9071: Filter queries ignore ""
@Nathan yes Layer -Filter
@Jürgen If you do that please explain people what you expect them todo. Maybe adding an gr...
Noone Noone
07:27 AM Bug report #9071: Filter queries ignore ""
That's usual SQL syntax. IMHO we should stick to that. Jürgen Fischer
04:52 AM Bug report #9071: Filter queries ignore ""
Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table? Nathan Woodrow
04:52 AM Bug report #9071: Filter queries ignore ""
Are you talking about Layer -> Filter.. or the expression you use for labels, actions, attribute table? Nathan Woodrow
03:43 AM Bug report #9071 (Closed): Filter queries ignore ""
When you define a filter and add a field it's inserted with encapsulated as "fieldname". This causes the user to thin... Noone Noone
09:50 AM Feature request #9074 (Open): be able to select Measure Tool unit for measurements when GCS
When I select the measure tool, specially in GCS the default option is degrees and it tells me (OTF off). What I woul... Antonio Locandro
09:46 AM Feature request #9073 (Open): Apply Customizations without restarting QGIS
when I do a customization in qgis to a layer toolbar changes only take place after restarting, it this the desired be... Antonio Locandro
09:41 AM Feature request #4640: New Feature: True North (TN) azimuth measurement.
Wouldn't it be practical to use Vincenty's Formula for this? Antonio Locandro
09:30 AM Feature request #9009: Field calculator expression should remember expression used
In other COTS software it is kept in memory during the lifetime of the open project. Lets say I created an expression... Antonio Locandro
09:25 AM Feature request #9065: Support for nautical miles and more rational scalebars in composer
I would find this very useful! In my area of work we need NM support, even for measuring distances and input of dista... Antonio Locandro
06:29 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Yes, I did use your latest version of QGIS. The drawing sped of QGIS with the postgis dataprovider is now compareable... Bo Victor Thomsen
03:55 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Bo Victor Thomsen wrote:
> Hi Alvaro -
>
> I just tried your new version of QGIS on my Postgis-based dataset (1.3 mi...
Alvaro Huarte
03:42 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi Alvaro -
I just tried your new version of QGIS on my Postgis-based dataset (1.3 million buildings, i.e simple pol...
Bo Victor Thomsen
05:12 AM Bug report #9069 (Feedback): Add PostGIS Table(s) Set Filter non-functional
It works fine here, tested on both linux and windows. Giovanni Manghi
05:12 AM Bug report #9069 (Feedback): Add PostGIS Table(s) Set Filter non-functional
It works fine here, tested on both linux and windows. Giovanni Manghi
05:12 AM Bug report #9069 (Feedback): Add PostGIS Table(s) Set Filter non-functional
It works fine here, tested on both linux and windows. Giovanni Manghi
05:12 AM Bug report #9069 (Feedback): Add PostGIS Table(s) Set Filter non-functional
It works fine here, tested on both linux and windows. Giovanni Manghi
04:15 AM Bug report #6430 (Closed): QGIS doesn't conform to WMS 1.3.0 resolution spec
closing for the lack of feedback. Jürgen Fischer
04:15 AM Bug report #6430 (Closed): QGIS doesn't conform to WMS 1.3.0 resolution spec
closing for the lack of feedback. Jürgen Fischer

2013-11-15

11:14 PM Bug report #9070 (Closed): +towgs84 wrongly ignored when OTF reprojection is on and project CRS i...
Issue seems to have appeared following the (cool) datum transformation commits. Steps to reproduce:
1. Create a new p...
Mathieu Pellerin - nIRV
10:25 PM Bug report #9049 (Closed): adding/editing layer feature crashes qgis master when OTF reprojection...
The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int... Mathieu Pellerin - nIRV
10:25 PM Bug report #9049 (Closed): adding/editing layer feature crashes qgis master when OTF reprojection...
The debian-nightly ppa had an update to its qgis master build with which I can't reproduce crash anymore. Looking int... Mathieu Pellerin - nIRV
06:21 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
this is weird, now I cannot replicate the issue anymore. Giovanni Manghi
05:25 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
Giovanni, disabling all plugins doesn't bring me much luck over here, still crashing. Mathieu Pellerin - nIRV
09:49 PM Feature request #8739 (Open): World file created from Project->Save as image has wrong extension ...
The mentioned changeset actually fixes #8793, not this one. Martin Dobias
09:15 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Alvaro Huarte wrote:
> Giovanni Manghi wrote:
> > Hi Alvaro
> >
> > with the new installer QGIS crashes when startin...
Alvaro Huarte
11:22 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Giovanni Manghi wrote:
> Hi Alvaro
>
> with the new installer QGIS crashes when starting.
>
> Cheers!
>
>
> Alvar...
Alvaro Huarte
10:01 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi Alvaro
with the new installer QGIS crashes when starting.
Cheers!
Alvaro Huarte wrote:
> Giovanni Manghi wrote...
Giovanni Manghi
03:36 PM Bug report #9069 (Closed): Add PostGIS Table(s) Set Filter non-functional
Applies to v2.x.x including most recent weekly build, worked previously in v1.8+
When attempting to filter data whil...
Damian Bradley
10:39 AM Bug report #9060: Area is wrong in QGIS master (again)
See attached project and files. See the two PNG images included. One shows how the area is predicted in the calculati... Rhenriques Henriques
05:57 AM Bug report #9060: Area is wrong in QGIS master (again)
I just checked and could not reproduce (yet).
OTF turned on:
With project CRS set to 4326 I get 2523339 in the ident...
Matthias Kuhn
08:44 AM Bug report #9063 (Closed): QGIS Plugin Builder crash since the second time it start
this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit...
Richard Duivenvoorde
08:44 AM Bug report #9063 (Closed): QGIS Plugin Builder crash since the second time it start
this looks like it is not crashing the QGIS Plugin Builder
but it is crashing a plugin (onetime) that is created wit...
Richard Duivenvoorde
08:36 AM Bug report #9066 (Closed): wmts service failing in master which are working in 1.8
fixed in commit:836e1a8 Jürgen Fischer
08:36 AM Bug report #9066 (Closed): wmts service failing in master which are working in 1.8
fixed in commit:836e1a8 Jürgen Fischer
08:13 AM Bug report #9066: wmts service failing in master which are working in 1.8
probably related or duplicate of #8401 Richard Duivenvoorde
08:07 AM Bug report #9066 (Closed): wmts service failing in master which are working in 1.8
This wmts service:
http://geodata.nationaalgeoregister.nl/tiles/service/wmts/brtachtergrondkaart
when loading the l...
Richard Duivenvoorde
08:36 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
Jürgen Fischer wrote:
> fixed in commit:836e1a8
Um, might actually be something different. That fixes the problems ...
Jürgen Fischer
08:34 AM Bug report #8401 (Closed): QGIS not able to access WMTS (GeoServer specific?)
fixed in commit:836e1a8 Jürgen Fischer
08:34 AM Bug report #8401 (Closed): QGIS not able to access WMTS (GeoServer specific?)
fixed in commit:836e1a8 Jürgen Fischer
08:15 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
#9066 has a public url to test Richard Duivenvoorde
08:09 AM Bug report #8401: QGIS not able to access WMTS (GeoServer specific?)
Found the same problem (QGIS 2.1 on WinXP 64): WMTS provided by default Mapcache 'demo' page works on QGIS 1.8 and 2.... Moreno Comelli
08:25 AM Feature request #9067 (Closed): Lower case names of fields when importing a shape by DBManager
This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too...
Paolo Cavallini
08:25 AM Feature request #9067 (Closed): Lower case names of fields when importing a shape by DBManager
This is made on purpose, to avoid putting all the fields in queries between ''.
This is also the shp2pgsl choice. Too...
Paolo Cavallini
08:23 AM Feature request #9067 (Closed): Lower case names of fields when importing a shape by DBManager
When importing a shape in Postgis by DBManager, the names of fields are switched to lower case.
It would be better l...
Moreno Comelli
07:32 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
iacopo zetti wrote:
> I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian whee...
Giovanni Manghi
06:45 AM Bug report #8851 (Closed): Opening the table of attributes is very slow in QGIS master
Fixed in changeset commit:"c0b8e9abdf17c16a18235983688eee6104ce744e". Matthias Kuhn
06:14 AM Bug report #8851 (Open): Opening the table of attributes is very slow in QGIS master
Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers!
Giovanni Manghi
06:14 AM Bug report #8851 (Open): Opening the table of attributes is very slow in QGIS master
Hi Matthias,
just compiled commit:2f9eba1, still very slow.
thanks for looking into this!
cheers!
Giovanni Manghi
05:47 AM Bug report #8851 (Feedback): Opening the table of attributes is very slow in QGIS master
Matthias Kuhn
04:50 AM Bug report #8793 (Closed): Crash while Exporting OpenStreetMap Topology to SpatiaLite
This has been fixed in commit:9259e27 Matthias Kuhn
04:43 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
With Niedersachsen-latest it doesn't work. Could yout test it with it? Torsten Osigus
03:47 AM Feature request #9065 (Closed): Support for nautical miles and more rational scalebars in composer
I've made PR https://github.com/qgis/QGIS/pull/995/files to make scalebars more rational (under my point of view) and... jtornero -
03:04 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
it is already integrated.
you should be able to use it right away.
Denis Rouzaud
03:03 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
Yes, if it is easily integrated into the "Create new feature" dialog. All i wanted to do is to digitalize per hand so... Martin Jung
01:19 AM Bug report #9064 (Closed): Crash when getting info from a styled layer
Fixed in changeset commit:"eaf90e6a40ff49913f2920c9bfd4106e0893883b". Matthias Kuhn
01:04 AM Bug report #9064: Crash when getting info from a styled layer
Most probably the crash is due to the fact that the form is referring to a field that has been deleted from the shape... Paolo Cavallini

2013-11-14

12:55 AM Bug report #9064: Crash when getting info from a styled layer
... Paolo Cavallini
12:53 AM Bug report #9064 (Closed): Crash when getting info from a styled layer
Clicking with the Info tool on the layer attached, with its own style (a form has been defined there) causes a system... Paolo Cavallini
10:12 PM Feature request #8441 (Feedback): Add dropdown list (or autocomplete) of previous entries to new ...
Martin, would you be satisifed by using unique values with editable checked? Denis Rouzaud
10:12 PM Feature request #8441 (Feedback): Add dropdown list (or autocomplete) of previous entries to new ...
Martin, would you be satisifed by using unique values with editable checked? Denis Rouzaud
06:04 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
at the end, this would be equivalent to have _*unique values*_ with _*editable*_ checked.
So it's rather a problem o...
Denis Rouzaud
05:52 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
value map is for unique value, isn't it?
Here, it would just be a helper with already used values.
It could maybe be...
Denis Rouzaud
05:16 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
We use the value map widget for this, but a simpler way would be good. Paolo Cavallini
04:51 AM Feature request #8441: Add dropdown list (or autocomplete) of previous entries to new feature dialog
What about setting an auto completer for line edits with unique values from the layer (not from the previous entries)? Denis Rouzaud
06:39 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c...
Alvaro Huarte
02:17 AM Feature request #8725: Speed improvement in the render of geometries for qgis
Giovanni Manghi wrote:
> > therefore, other improvement for render vector layers!
>
>
> very good news!
>
> any c...
Alvaro Huarte
01:50 PM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
I have done the test: yes it happens with two different computers (Ubuntu 13.04 and debian wheezy). Yes it happens al... iacopo zetti
08:24 AM Bug report #8851: Opening the table of attributes is very slow in QGIS master
It could be related to debug messages being printed in master (which is probably compiled with CMAKE_BUILD_TYPE=Debug... Matthias Kuhn
07:40 AM Bug report #8506 (Reopened): In the Label Section- option Type case - Capitalize first letter don...
This was closed prematurely, it does not work as advertised. The problem is that the function assumes the input is al... belg4mit -
05:44 AM Bug report #9063 (Closed): QGIS Plugin Builder crash since the second time it start
This is the error:
Couldn't load plugin onetime due an error when calling its classFactory() method
Traceback (most...
alexis acosta
03:11 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
Hi Mathieu,
this can be a plugin issue after all. I disabled all plugin but the "new memory layer" one and the crash ...
Giovanni Manghi
01:45 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
Marco, are you running QGIS on windows or linux? Mathieu Pellerin - nIRV
01:06 AM Bug report #7927: composer fails to export with high dpi, without any message
The GarminCustomMap plugin is facing a similar problem (e.g. #5077) when directly importing the mapCanvas, I think.
L...
Stefan Blumentrath
01:00 AM Feature request #8739 (Closed): World file created from Project->Save as image has wrong extensio...
Fixed in changeset commit:"9259e27c415b651ba49730adc098b798dc531908". Matthias Kuhn

2013-11-13

12:54 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
I tried exactly those steps and cannot replicate here (todays master). Any special options that need to be set? Marco Hugentobler
12:33 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
Export of polygons from Bremen-latest works for me without any crashes. Martin Dobias
06:39 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
http://download.geofabrik.de/europe/germany/bremen-latest.osm.pbf
File size: 9.1 MB
From http://download.geofabrik.de...
Torsten Osigus
06:37 AM Bug report #8793: Crash while Exporting OpenStreetMap Topology to SpatiaLite
Umm... the file has 180mb... Any chance for a smaller dataset that exhibits the crash? (I have currently slow and bad... Martin Dobias
04:44 PM Bug report #9059 (Feedback): Qgis crashes when using identify or opening raster properties, when ...
I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out... Giovanni Manghi
04:44 PM Bug report #9059 (Feedback): Qgis crashes when using identify or opening raster properties, when ...
I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out... Giovanni Manghi
04:44 PM Bug report #9059 (Feedback): Qgis crashes when using identify or opening raster properties, when ...
I can remember ever seeing this issue, but this means nothing. I will do tests on Ubuntu and Windows, but to rule out... Giovanni Manghi
05:43 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
It happens while I'm using Monte Mario zone 1 and WGS 84 /UTM zone 32N, I haven't tested with other CRS.
Yes OTRF is ...
iacopo zetti
03:50 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h...
Giovanni Manghi
03:50 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h...
Giovanni Manghi
03:50 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h...
Giovanni Manghi
03:50 AM Bug report #9059: Qgis crashes when using identify or opening raster properties, when OTRF is ON ...
Can you add more details?
in what CRS is your project? Are you using OTRF? what formats have your rasters? When it h...
Giovanni Manghi
03:47 AM Bug report #9059 (Closed): Qgis crashes when using identify or opening raster properties, when OT...
When I try to open the layer properties command on a raster or to use the identifier on a raster layer Qgis crashes. ... iacopo zetti
04:39 PM Feature request #9061: Add a "minimum distance between points" in the "random points" tool in the...
Filipe Dias wrote:
> You mean like this?
>
> http://www.inside-r.org/packages/cran/spatstat/docs/rSSI
>
> It shoul...
Giovanni Manghi
01:20 PM Feature request #9061: Add a "minimum distance between points" in the "random points" tool in the...
You mean like this?
http://www.inside-r.org/packages/cran/spatstat/docs/rSSI
It should be possible to add this fun...
Filipe Dias
12:17 PM Feature request #9061 (Closed): Add a "minimum distance between points" in the "random points" to...
Eventually by allowing choose a fixed value or a value taken from an attribute Giovanni Manghi
04:31 PM Feature request #8725: Speed improvement in the render of geometries for qgis

> therefore, other improvement for render vector layers!
very good news!
any chance for an updated windows insta...
Giovanni Manghi
04:26 PM Feature request #8725: Speed improvement in the render of geometries for qgis
Hi,
There is a bug in QgsOgrFeatureIterator::ensureRelevantFields(), the feature cursor always fetchs all attributes...
Alvaro Huarte
04:28 PM Bug report #9062: QgsOgrFeatureIterator always fetch all feature attributtes but are unnecessary
Thanks! Alvaro Huarte
03:53 PM Bug report #9062 (Closed): QgsOgrFeatureIterator always fetch all feature attributtes but are unn...
Fixed in changeset commit:"af73f30c27b5ee4860842d79eb59ad3b584e0965". Jürgen Fischer
03:26 PM Bug report #9062: QgsOgrFeatureIterator always fetch all feature attributtes but are unnecessary
Fixed in pull request:
https://github.com/qgis/QGIS/pull/994
Alvaro Huarte
03:26 PM Bug report #9062: QgsOgrFeatureIterator always fetch all feature attributtes but are unnecessary
Fixed in pull request:
https://github.com/qgis/QGIS/pull/994
Alvaro Huarte
03:26 PM Bug report #9062: QgsOgrFeatureIterator always fetch all feature attributtes but are unnecessary
Fixed in pull request:
https://github.com/qgis/QGIS/pull/994
Alvaro Huarte
03:26 PM Bug report #9062: QgsOgrFeatureIterator always fetch all feature attributtes but are unnecessary
Fixed in pull request:
https://github.com/qgis/QGIS/pull/994
Alvaro Huarte
03:12 PM Bug report #9062 (Closed): QgsOgrFeatureIterator always fetch all feature attributtes but are unn...
There is a bug in QgsOgrFeatureIterator::ensureRelevantFields(), the feature cursor always fetchs all attributes igno... Alvaro Huarte
11:57 AM Bug report #9060: Area is wrong in QGIS master (again)
the slowness of the attribute table has been reported in another (blocking) issue. Giovanni Manghi
11:57 AM Bug report #9060: Area is wrong in QGIS master (again)
the slowness of the attribute table has been reported in another (blocking) issue. Giovanni Manghi
11:57 AM Bug report #9060: Area is wrong in QGIS master (again)
the slowness of the attribute table has been reported in another (blocking) issue. Giovanni Manghi
11:50 AM Bug report #9060 (Closed): Area is wrong in QGIS master (again)
Qgis 2.1 DEV has a ressurgence of the "area calculation bug" with OTFR. For instance the NB e890e14 cannot calculate ... Rhenriques Henriques
03:50 AM Bug report #9050: Cannot add a scalebar in meters of project is wgs84
Hi,
In WGS84 scale in meters is different in N/S and E/W directions except on top of the equator line. Would you lik...
Jukka Rahkonen

2013-11-12

12:45 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
Marco Hugentobler wrote:
> Hm, does not crash here. What CRS (and what datum transform) do you assign to the newly cr...
Giovanni Manghi
12:26 AM Bug report #9049: adding/editing layer feature crashes qgis master when OTF reprojection is enabled
Marco, here are my settings:
1. Project CRS: WGS84, OTF reprojection on
2. Newly created layer CRS: WGS84
I'm on a L...
Mathieu Pellerin - nIRV
12:19 AM Bug report #9049 (Feedback): adding/editing layer feature crashes qgis master when OTF reprojecti...
Hm, does not crash here. What CRS (and what datum transform) do you assign to the newly created layer? Marco Hugentobler
12:44 AM Bug report #9050 (Open): Cannot add a scalebar in meters of project is wgs84
Giovanni Manghi
 

Also available in: Atom