Activity
From 2013-12-01 to 2013-12-30
2013-12-30
-
06:00 PM Feature request #9275: Choose custom grid shift binary when re-projecting/transforming a dataset.
- This option could also be useful in some cases when "re-project on the fly" is enabled.
-
- It would be nice to be able to specify a grid shift binary file when re-projecting or transforming data.
I have some... -
-
- Apologies, meant to set this as a feature, not a bug.
Can't change it now. -
- It would be nice to be able to specify a grid shift binary file when re-projecting or transforming data.
I have some... -
04:04 PM Bug report #9273 (Resolved): Move fullscreen shortcut
- pull request #1047 (https://github.com/qgis/QGIS/pull/1047) merged :-)
-
- pull request #1047 (https://github.com/qgis/QGIS/pull/1047) merged :-)
-
- This pull request fix this shortcuts:
https://github.com/qgis/QGIS/pull/1047
-
- This pull request fix this shortcuts:
https://github.com/qgis/QGIS/pull/1047
-
12:20 PM Bug report #9273 (Closed): Move fullscreen shortcut
- I detected some very unexpected shortcuts that might can be fixed. Currently:
* CTRL+F -> fullscreen
But expected wo... -
- Thanks @all :)
-
- "pull request 1010":https://github.com/qgis/QGIS/pull/1010 merged :-)
-
- "pull request 1010":https://github.com/qgis/QGIS/pull/1010 merged :-)
-
- "pull request 1010":https://github.com/qgis/QGIS/pull/1010 merged :-)
-
02:37 PM Feature request #9270: Add basemaps always below vector-layers
- Personally I'd prefer to have complete control on where the layer goes. In really big projects it's annoying to have ...
-
07:26 AM Feature request #9270: Add basemaps always below vector-layers
- A polygon layer might fully cover the new layer and cause the same confusion. Maybe setting a default transparency l...
-
- @Filipe Sounds like a good addition to the request. If a new added layer is selected by default, this should fullfill...
-
05:59 AM Feature request #9270: Add basemaps always below vector-layers
- I personally think that the option that allows to add new layers directly inside the selected groups is more than eno...
-
12:07 PM Bug report #9266: QGIS gets stuck during on the fly reprojection
- Shapefiles are ok, as far as I know, although the dialog for the selection of the datum transformation does not turn ...
-
- Shapefiles are ok, as far as I know, although the dialog for the selection of the datum transformation does not turn ...
-
- Does this happens also with shapefiles? Can you attach a sample project/data?
-
- Does this happens also with shapefiles? Can you attach a sample project/data?
-
- Does this happens also with shapefiles? Can you attach a sample project/data?
-
11:41 AM Bug report #9271: Tune stylemanager spinbutton
- +1. I'd say an even smaller step like 0.1 or 0.2 would be appropriate.
-
- Hi,
currently the spinbuttons for size and outline width have the tick of 1.0. So if you click on the button right be... -
- Hi,
I recognized that if you add a point layer and like to show labels (e.g. to display a value per item), you get (I... -
- For what I have understand here
#bc73b4ea72517b2847525e376f8462ca8031f049#commitcomment-4623021
this functionality ... -
- For what I have understand here
#bc73b4ea72517b2847525e376f8462ca8031f049#commitcomment-4623021
this functionality ... -
02:21 AM Bug report #8664: qgis dont load SVG symbol from they are in more than one subfolder in name attr...
- Hi,
Is confirmed this issue ?
-
- Fixed in changeset commit:"5262a4d6830103a1dae1fbe8f66c017e75319a7f".
-
- Fixed in changeset commit:"5262a4d6830103a1dae1fbe8f66c017e75319a7f".
2013-12-29
-
- I propose this pull request:
https://github.com/qgis/QGIS/pull/1046
It adds OutlineStyle support to simple and ellip... -
- I propose this pull request:
https://github.com/qgis/QGIS/pull/1046
It adds OutlineStyle support to simple and ellip... -
03:26 PM Bug report #9060: Area is wrong in QGIS master (again)
- Nyall is right! I've only tested in projects with projected units. The settings are not even stable. Sometimes things...
-
- There is a side-effect of setting the ellipsoid to "None/planimetric":
- Set the otf projection to a non-projected cr... -
- Alvaro Huarte wrote:
> Hi Rhenriques, then this issue can be closed?
> Best regards
Hi Alvaro and Rui,
what are the ... -
02:14 PM Bug report #9259: SpatiaLite new column issue
- SQLite does not really support (or has a limitation) to set column width and precision so hiding the controls feels l...
-
03:33 AM Bug report #9259 (Reopened): SpatiaLite new column issue
- In last master "width" and "precision" labels gone.
-
- I suggest this behaviour: if the user has selected a layer, then the newly added layer/raster should be added above o...
-
- Currently if you like to visualize vector geodata using QGIS, you add them as vector layer to see if everything looks...
-
- 1. Open any vector layer and toggle editing mode;
2. Open field calculator and create new field using function "$rown... -
- Settings - Options - CRS - Default datum transformations
-
- Hi,
I'm using qgis-master together with postgis 2.1.1. Usually I use the packages for openSUSE provided by "Applicat... -
01:30 AM Bug report #9264: Error writing output shapefile while building Voronoi polygons
- Not reproducible here with latest master under Linux.
-
- Confirmed also here, but works fine under processing.
-
- There is the option, but does not work, see #4575
-
- There is the option, but does not work, see #4575
-
01:05 AM Bug report #9036 (Rejected): db manager's spatialite node gone in latest qgis master
- You need to install pyspatialite package
-
- You need to install pyspatialite package
2013-12-28
-
- Looks very good to me :)
I hope that I will have the time to have some more thoughts about the [[usability]] of the s... -
- Hi, what do you think about append outline style ?
!OutlineStyle.jpg!
I think that I can implement it
-
- Sry was my fault, thank you for reopening!
-
- noone noone wrote:
> Call me stupid, but where is the option hidden?
as you didn't specified I supposed you were sp... -
- noone noone wrote:
> Call me stupid, but where is the option hidden?
as you didn't specified I supposed you were sp... -
- noone noone wrote:
> Call me stupid, but where is the option hidden?
as you didn't specified I supposed you were sp... -
- noone noone wrote:
> Call me stupid, but where is the option hidden?
as you didn't specified I supposed you were sp... -
12:45 AM Bug report #9264: Error writing output shapefile while building Voronoi polygons
- confirmed
-
- Test case:
1. Open polygonal layer;
2. Open point layer with the same name as polygonal (from other directory);
3. T... -
- Hi, I like the idea of planet.qgis.org as a way to keep in contact with the global qgis community.
Unfortunatly you ... -
- Fixed in changeset commit:"53c654ff97ff5f69a9e2627fb224ee7e24df2b5b".
-
- Fixed in changeset commit:"097a1954b7a66a90ceb7707bdf58db52740aea6d".
-
- Hi Alvaro
I suppose so. I've tested in several projects and values are always correctly calculated if 'none/planimet... -
- Hi Rhenriques, then this issue can be closed?
Best regards -
- Fixed in changeset commit:"6aed6fee0889557cb0c5d257df1c62b910907e98".
-
- Fixed in changeset commit:"aa3e40a0ebfaab34d3405dcbee5a9d72dfb9ab89".
-
- Fixed in changeset commit:"391e6621efa2dbffb033d80b3d03bba94e8b1be0".
-
12:21 PM Bug report #9261 (Closed): Typo in strings
- I found some typos in this strings:
<location filename="../src/ui/qgsprojectpropertiesbase.ui" line="1335"/>
<source... -
- I confirm too, Windows not ok, Ubuntu ok.
-
09:04 AM Bug report #8920 (Closed): DB Manager Fails to Load Raster | QGIS 2.0.1
-
- Duplicate of #9165 ?
-
- Fixed in changeset commit:36d9d4bfa16ff6af6a036d321ad654be62f067ee.
-
- 1. Open any SpatiaLite file.
2. Toggle editing mode
3. Open attribute table and press "New column"
4. Choose any type... -
- Size scale field doesn't work while using "Centroid fill" symbol layer type for polygonal layer. Is it bug? Whith poi...
-
-
- It looks like the same issue already was reported #9036.
-
- On Linux (Ubuntu) all works fine, but in Windows (Windows 7) SpatiaLite item is absent in DB Manager.
-
02:21 AM Feature request #9255: Toolbar for map workspace
- Oh it wouldn't be MDI. It would look exactly like it does now.
-
- I see... Maybe stackoverflow, stackexchange, ... know a different tweak to avoid this n instance mainwindow thing? I ...
-
- The only way to have a moveable toolbar is to have it owned by QMainWindow. You can have more then one QMainWindow p...
-
- This is a feature not a bug. You are able yo open two browsers mainly to allow drag and drop between locations.
-
- There are two Browser items in menu: Browser and Browser(2).
-
- In dialog of choosing font of label all fonts marked as "TT" (TrueType?) including OpenType and PostScript fonts.
2013-12-27
-
- Mhh thats bad :( Is there really no way to get both? Unfortunatly I have no QT skills...
-
- We have considered this before but you loose the ability to move a toolbar if it isn't owned my QMainWindow. So yes ...
-
- As QGIS is complex, the main toolbar has a lot of items and thus the user needs some time to scan/read/recognize the ...
-
- Hi Alvaro
You are right! Maybe the none/planimetric option should be selected as "default" for every new project.
Ch... -
- Hi, I have found that the change in the calculated value of the area is due to the configuration of the project.
It ... -
12:32 PM Bug report #8920: DB Manager Fails to Load Raster | QGIS 2.0.1
- I merged your pull request here https://github.com/qgis/QGIS/pull/1042 - many thanks!
-
- Fixed in changeset commit:"8dd31ff9e8a0da210397a03ce6ae2fa429c9cdc8".
-
08:03 AM Bug report #9241: QgsVectorDataProvider.minimumValue() and maximumValue() don't work for Date fields
- The fix has been implemented upstream: http://trac.osgeo.org/gdal/ticket/5333#comment:2
-
- Call me stupid, but where is the option hidden? !qgis_point_symbol_style.png!
2013-12-26
-
- symbol layers -> simple fill -> border style -> no pen
-
- symbol layers -> simple fill -> border style -> no pen
-
- Per default the map style symbolizers/icons have an black outline to make them easy to recognize even on bright backg...
-
- Hi, I committed a new version of geometry simplification to speed up the vector drawing.
https://github.com/ahuarte47... -
01:17 PM Bug report #9229: Layer editing saving for a long time (memory leak?)
- Hello,
can confirm this behavior also on windows machine.
Intensive digitizing makes work more and more slower, espec... -
06:52 AM Bug report #9229: Layer editing saving for a long time (memory leak?)
- Matthias Kuhn wrote:
> Hi Giedrius
>
> Can you please provide more information about the problems you are experienci... -
- Fixed in changeset commit:"7507cfcd3fcd57b059da7a5337bce0ff1ec6b9fe".
-
- FYI: I started the [[usability]] page as a central startingpoint for the community.
-
05:36 AM Bug report #9253: Regarding issue #8793... is not solved (OSM maps)
- My apologies, you need to use the developer version for it to work!
Thanks for the update, as I downloaded the lates... -
- The issue #8793 has been fixed in qgis master, if you are using qgis 2.0.1 (from the details of this ticket) then you...
-
- The issue #8793 has been fixed in qgis master, if you are using qgis 2.0.1 (from the details of this ticket) then you...
-
- Downloaded osm.bz2 for the countries of Portugal and Spain at "http://download.geofabrik.de/europe.html"
Successfully... -
04:22 AM Bug report #8619: Raster Calculator does not handle decimal values
- I am having the same behaviour with QGIS 2.0.1-Dufour and GDAL version 1.10.0. I am trying to filter a real value sin...
-
04:16 AM Feature request #1698: Rotation of the map view
- It's useful in navigation systems, where laptop with QGIS show image for operator and, simultaneously, for a driver.
-
- The problem comes from the gdal.polygonize function with the 8CONNECTED=8 option set. Both layers are build from rast...
2013-12-25
-
- The error seems to be an issue in OTB tool, not how processing handles it.
You can try running the same OTB tool by ... -
- I guess is one of the various bugs that are affecting the georeferencer.
-
- I guess is one of the various bugs that are affecting the georeferencer.
-
- 1. Raster - Georeferencer - Georeferencer;
2. Set `Linear` and check `Create world file`;
3. Set another transformati... -
- There is also an error in the "referencia" layer that seems to be the source of the problem, as once fixed (see attac...
-
- There is also an error in the "referencia" layer that seems to be the source of the problem, as once fixed (see attac...
-
- There is also an error in the "referencia" layer that seems to be the source of the problem, as once fixed (see attac...
-
- I'm also use latest master/linux (Ubuntu).
-
- Does not happen on latest master/linux, are you on Windows?
-
- Does not happen on latest master/linux, are you on Windows?
-
- 1. Open vector layer
2. Layer Properties - Styles - Graduated
3. Don't fill Column field
4. Set mode to Quantile
5. Q... -
- Matthias Kuhn wrote:
> Hi Giedrius
>
> Can you please provide more information about the problems you are experienci... -
- Matthias Kuhn wrote:
> Hi Giedrius
>
> Can you please provide more information about the problems you are experienci... -
- Cannot confirm either.
-
-
- I can't replicate this... are you able to confirm whether you still see this occurring in the current dev master vers...
-
- I guess we have the same kind of bug in the generic fallback code as well, so let's keep it open until we are sure it...
-
- Should I close the ticket here or wait until the new OGR version is released and included in QGIS downloads?
2013-12-24
-
- Reported: https://trac.osgeo.org/gdal/ticket/5333
-
- This seems to be an upstream OGR issue:
$
$ ogrinfo /tmp/test/test2.shp -sql "SELECT MAX( 'DATE' ) from tes... -
- Works here.
Can you think of anything special? Are you able to share your project file?
Thank you -
-
- Hi Giedrius
Can you please provide more information about the problems you are experiencing.
* What type of data ... -
- They are exposed to python in master.
-
02:15 AM Bug report #9250 (Closed): QgsRasterLayer.hueSaturationFilter() bindings for Python
- Hi,
please provide these bindings for Python Plugins in the class QgsRasterLayer
hueSaturationFilter ()
and the m...
2013-12-23
-
07:51 PM Bug report #9249 (Closed): Composer renders fonts incorrectly when saved as bitmap
- When I save to bitmap in the Composer it renders the text fonts incorrectly in the labels of one of the layers. This ...
-
04:07 PM Feature request #9248 (Closed): Atlas - Using the same coverage layer multiple times in a sheet.
- I'd like to see a feature added that allows you to use a coverage layer multiple times in the one map sheet.
I have ...
2013-12-22
-
- I had a try with OpenJUMP and result was the same. There seems to be a topolygy error in a feature on the "omiss" lay...
2013-12-21
-
- 1. Layer - Add vector layer - Database
2. Choose PostgreSQL connection
3. Create new connection or modify existed: lo... -
05:31 AM Bug report #9244 (Closed): Paste in place doesn't work across pages anymore
- In 2.0, when working on multi-pages composers, you could copy-in-place an item from a page to another (the item would...
2013-12-20
-
09:08 PM Bug report #9243: libotbossimplugins.so undefined symbol error
- The particular tool in question is pansharpening.
-
- Hi,
When executing cammands in the processing toolbox involving the OTB toolkit I receive the following error:
OTB ... -
- Everything here has been covered so far except print units in inches/points (duplicate of #7959 and #7367) and subdiv...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- Here's a sample of the layers I am operating. If I try the spatial query selecting all features in "Omiss" that touch...
-
- I am using the spatial query to select all features in a layer that "touches" another feature in another layer. As it...
-
- minimumValue(idx).toString() and maximumValue(idx).toString() only return empty strings.
The issue popped up because... -
- Hi, does QGIS have a wiki team? There are still a lot of old textblocks, that seem to be the rests of an imported Med...
-
- Thanks, I just had to recompile gdal with cfitsio and all was good when compiling qgis again.
-
- QGIS doesn't use cfitsio directly. Sounds like a GDAL packaging problem on ArchLinux.
-
- QGIS doesn't use cfitsio directly. Sounds like a GDAL packaging problem on ArchLinux.
-
07:53 AM Bug report #9239 (Closed): Scale dependent visibility
- Scale dependent visibility doesn't work for QGIS 2.x
If the checkbox is checked the layer simply disappears, irrespec...
2013-12-19
-
- This is the compile error from QGIS 2.0.1 (stable/release) with an updated cfitsio (3.360) reported from an Arch Linu...
-
07:44 AM Bug report #9234 (Closed): WFS client doesn't expose Header Authorization
- When using a WFS layer to access to a private service protected by apache BasicAuth, the requests don't use the infor...
-
04:54 AM Bug report #9233 (Closed): QGis - SAGA clip grid with polygon
- I am trying to clip a landsat image with a rectangular polygon (TIF and shapefile respectively). The process exits wi...
-
04:41 AM Bug report #9232 (Closed): do not list non-geometric layers in layer order
- Would it be possible not to list the non geometric layer in the layer order dock?
-
02:33 AM Feature request #8682: Add expressions to diagrams
- Pull request: https://github.com/qgis/QGIS/pull/1039 :-)
2013-12-18
-
09:28 PM Bug report #8964: GDAL Translate Problem on QGIS 2.0.1
- Just for the record, the issue as discussed on the mailing list with a workaround.
http://osgeo-org.1560.x6.nabble.co... -
- Hi Giovanni, thank you very much for this video.
I think this pull solve the bug
https://github.com/qgis/QGIS/pull/... -
- Hi Giovanni, thank you very much for this video.
I think this pull solve the bug
https://github.com/qgis/QGIS/pull/... -
- weird, is still broke here, see attached screencast.
-
-
- Thats true, but there is no link between the layer copies anymore and it's just a flat copy. This is bad, if you just...
-
02:25 AM Feature request #9140: Separating datasource, layer and style
- Hi,
maybe I missunderstand, but it is possible to define several styles to visulize a single datasource in multiple ... -
- Neil Benny wrote:
> Can anyone update me about this? - has there been any breakthrough? Is it scheduled as a bug-fix ... -
02:31 AM Bug report #8752: Unable to open ESRI personal geodatabase in 2.0
- Can anyone update me about this? - has there been any breakthrough? Is it scheduled as a bug-fix on the new version?
-
- Try to open "park" WFS layer from server: ...
-
- Yes, this was broken for autogenerated forms, but fixed in the next commit commit:6dff9e4fa559ee3ac343782a1857e260cb8...
-
- Matthias Kuhn wrote:
> Fixed in changeset commit:"ffc1abaf2d8002b93b77886c8a2c4356b1798597".
thanks for the fix Matt... -
- Fixed in changeset commit:"ffc1abaf2d8002b93b77886c8a2c4356b1798597".
-
06:50 AM Bug report #9230 (Closed): Double quote schema and table names
- I regularly use upper case letters in my table names. Upon loading such a relation the PostGIS error log (and the Pos...
-
- 8-9 clicks "save layer edits, work begins to slow down. 12-14 clicks slow down completely.
Hover:
!http://i.imgur.co... -
- There may be significant benefit to moving to our own custom colour picker. CMYK colour picking in particular has bee...
-
- Hi,
as a first step we could add some global WMS/WMTS into the documentation and/or the new training manual. It woul... -
02:04 AM Bug report #9213: 'bad_alloc' error at QGIS start
- Could it be some problem in counting extent and starting scale of map canvas from QGIS application window ? From debu...
2013-12-17
-
- Jonathan Moules wrote:
> I appreciate you're both using different pixel sizes, but is there a way to change the pixel... -
08:58 AM Bug report #9222: WMTS being interpolated at native scale
- Sorry if I'm missing something here, but the OpenLayers scale is 1:150,000 too.
I appreciate you're both using diffe... -
- Jonathan Moules wrote:
> Ok. The tiles are rendered at WM(T)S spec resolution (so 90.7142367 dpi).
> I get the premis... -
- Ok. The tiles are rendered at WM(T)S spec resolution (so 90.7142367 dpi).
I get the premise of linked bug, however as... -
- The tiles are 1:150000 at which resolution (note that QGIS scale is calculated on screen resolution, not on the arbit...
-
- 1) Create a new project in EPSG:27700
2) Add WMTS http://maps.warwickshire.gov.uk/gs/gwc/service/wmts?REQUEST=GetCapa... -
- Just got the same for the first time on my Fedora machine (using a freshly compiled master). The last time I have see...
-
-
- If I am right, we use Qt native QColorDialog for choosing color, so we don't have the liberty of doing this.
-
- only data, a postgres layer without geometry column for instance
-
- what is a "non-geometric" layer?
-
- The message is: Not fully defined drawing order set to legend order.
-
- If you have non-geometric layers and want to use the custom layer order, it is disabled every time your re-open the p...
-
08:38 PM Bug report #9150: SAGA raster calculator fails when used in a processing model
- Is there any solution for that problem?
-
- Giovanni Manghi wrote:
> I just updated my master and still see the issue: the value map is a 2 columns table, named ... -
- I just updated my master and still see the issue: the value map is a 2 columns table, named "value" and "description"...
-
02:29 PM Feature request #9227 (Open): Option to join layers of multi-layer vector KML file
- Currently when you load a multi-layer KML you're forced to pick a layer one at time. Often, however, what you really...
-
- Vector KML files often include a great deal of formatting information. Is there any way to map the format informatio...
-
- The suggestion is that the New Column dialog from the attributes table provide more useful defaults. On my installat...
-
-
- Hi
Sorry for the noise - I tested again and it works fine for me now.
Regards
Tim -
- merged in commit:17cd09a8a7352d761602c547d29f660aed219adb
-
- What about add documentation to user manual?
-
-
- Alvaro Huarte wrote:
> I am pleased to announce that this patch seems to have been merged!
> :-)
>
> Thank you very ... -
- I am pleased to announce that this patch seems to have been merged!
:-)
Thank you very much for your support and adv... -
- fixed in commit:57e9411f263b682489fc61c5755423bfdcfeed2a
-
-
- fixed in commit:57e9411f263b682489fc61c5755423bfdcfeed2a
-
-
- When removing a relation in project properties, if the relation is not selected before clicking the proper button, th...
-
08:16 AM Feature request #9223 (Open): Raster continuous color scales
- When displaying a raster layer in Qgis with a linear interpolation of specified colors, the legend in the composer (a...
-
- Fixed in changeset commit:"accd06dcb9e12999c3aeaf95f0a7e9509a9fa4a3".
-
-
07:10 AM Bug report #9221 (Closed): Overwriting shapefile removes all attribute data and features
- Using the 'save as' dialog to overwrite a shape file writes a new empty shape file, losing all the previous data in ...
-
05:33 AM Bug report #9220 (Closed): Error in Export as PDF when transparency has been selected and then re...
- I've encountered an error in Export as PDF from the print composer. When I've added a transparency amount to one laye...
-
- This seems to have been solved in Master. Someone want to confirm and close?
-
2013-12-16
-
-
- Hi all!
Now, when I change the value of "landuse" attribute in the "Identify results form" of QGIS, it rewrites the d... -
- Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Works here using your data with master and windows x86.
> > If you ... -
-
> I had installed QGIS as a standalone (not osgeo4w). Every command made it crash. Strangely though, I could load... -
10:18 AM Bug report #9203: R Plots are blank on qgis64bit
- I haven't tried it on Linux, nor will I in the near future.
I had installed QGIS as a standalone (not osgeo4w). Eve... -
- At least in my case, it seems that this problem appears more frequently when running Ubuntu in VirtualBox than on phy...
-
08:14 AM Bug report #9216: The map becomes black when scale is > 1:1600
- I have GDAL 1.9.0
One of my friend has the same bug, I'm sure he has 1.10 (I'm going to ask him).
My about box :
Ver... -
- I have GDAL 1.9.0
One of my friend has the same bug, I'm sure he has 1.10 (I'm going to ask him).
My about box :
Ver... -
07:40 AM Bug report #9216: The map becomes black when scale is > 1:1600
- hi Etienne,
I cannot reproduce your problem here. Both in 2.0.1 and in QGIS testing, using your osmfr.xml I can zoom... -
- Hi,
I use some XML files to display TMS in QGIS like these files :
http://www.gdal.org/frmt_wms.html
If I zoom to m... -
- Uninstalling QGIS (either stable release or the weekly) from Windows doesn't remove the registry entries.
Ideally QG... -
- Done (This PR also fixes #9191):
https://github.com/qgis/QGIS/pull/1028 -
- Done (This PR also fixes #9191):
https://github.com/qgis/QGIS/pull/1028 -
- Done (This PR also fixes #9191):
https://github.com/qgis/QGIS/pull/1028 -
- Done (This PR also fixes #9191):
https://github.com/qgis/QGIS/pull/1028 -
- Pull-request available at https://github.com/qgis/QGIS/pull/1030
2013-12-15
-
- Just a sidenote: One thing I would very much like to see is the porting of these widgets to the new API [1] This will...
-
- Giovanni Manghi wrote:
> Alvaro Huarte wrote:
> > Works here using your data with master and windows x86.
> > If you ... -
- This isn't the place to post stuff like this. You should only post bugs or feature request here.
The best place to ... -
08:43 PM Bug report #9215 (Closed): pgRouting + QGIS + Mac = headache
- Hello GIS-Pros,
I really need your help!
I'm a real newbie so please forgive me if this is a stupid post but I coul... -
- Done (This PR also fixes #9190):
https://github.com/qgis/QGIS/pull/1028 -
- Done (This PR also fixes #9190):
https://github.com/qgis/QGIS/pull/1028 -
- Done (This PR also fixes #9190):
https://github.com/qgis/QGIS/pull/1028 -
07:56 AM Bug report #9101: Raster artefact in composer pdf export
- Radim Blazek wrote:
> The margin on the left (potentially also right) is another issue, it just became apparent with ... -
03:05 AM Bug report #9213: 'bad_alloc' error at QGIS start
- Luigi Pirelli wrote:
> append to me too...
>
> first we had experienced with this error on windows (32b) loading plu...
2013-12-14
-
- Alvaro Huarte wrote:
> Works here using your data with master and windows x86.
> If you want, you can describe me the... -
- Works here using your data with master and windows x86.
If you want, you can describe me the steps to cause the error... -
02:22 PM Bug report #9213: 'bad_alloc' error at QGIS start
- I confirm the same random problem, both on Ubuntu and Xubuntu 12.04 with QGIS 2.0.1 packages from UbuntuGis PPA
-
- append to me too...
first we had experienced with this error on windows (32b) loading plugin containing a lot of dat... -
- There is an error message 'std::bad_alloc' just after QGIS window is started (see qgis-bad-alloc.png). This problem i...
-
08:00 AM Bug report #9101: Raster artefact in composer pdf export
- The margin on the left (potentially also right) is another issue, it just became apparent with no data color change, ...
-
- > does this happen only on Windows or Linux too?
On Linux it works as expected.
-
-
> Unfortunately, I cannot switch to the 32-bit QGIS (Win 8.1 x64) because I ran into a more serious issue with GRAS... -
- Filipe Dias wrote:
> I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version?
do... -
- Filipe Dias wrote:
> I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version?
do... -
- Filipe Dias wrote:
> I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version?
do... -
- Fixed.
The next bug report will be: "Why QGIS gives no data value -999.9000244140625 while GDAL -999.89999999999997... -
- Fixed in changeset commit:"c4b248066da828c8f00f068053e50eff301ae663".
-
- The problem is that the decimal no data value -999.9 cannot be represented with sufficient precision by the raster da...
-
-
2013-12-13
-
- not sure I did it right, but here's a pull request that fixes the issue for me https://github.com/qgis/QGIS/pull/1026
-
12:04 PM Bug report #8403: Toggling layer visibility to off doesn't work if you highlight a different laye...
- Thanks Giovanni... I couldn't figure out why you weren't able to replicate the issue, when all 20+ QGIS users here (a...
-
- Brett Z wrote:
> I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried... -
- I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried a project with a...
-
-
- Brett Z wrote:
> I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I agree it mi... -
- Thanks Giovanni... I couldn't figure out why you weren't able to replicate the issue, when all 20+ QGIS users here (a...
-
- Brett Z wrote:
> I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried... -
- I tested it some more and found it only occurs when there are PostGIS layer in the document. I tried a project with a...
-
- Brett Z wrote:
> I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I think it is... -
- Yes, I can confirm that this problem is specific to the 64-bit version of QGIS. I ran both versions (32 and 64 bit) ...
-
07:23 AM Bug report #9212 (Closed): pyqgis_developer_cookbook example calls for xMin() instead of xMinimum()
- http://www.qgis.org/en/docs/pyqgis_developer_cookbook/canvas.html
In the "Writing Custom Map Tools" example, in the ... -
-
- Could someone re-open this ticket as it's not a duplicate. Thanks.
-
05:29 AM Feature request #9211: Optimisation: Don't render redundant features
- Mmm, not sure it is a good optimisation path. Most user do use blending modes and/or transparency options to visualiz...
-
- An optimisation: Don't keep rendering symbols that are all the same on top of each other.
Epitomised with: http://www... -
03:30 AM Bug report #6146: Offline editing tool broken
- Confirmed. I am experiencing the same.
2013-12-12
-
- I think this bug is specific to the 64 bits version. Can you retry with the 32 bits version?
-
- The issue does seem to be similar to #7643, however, there are no solutions yet. From comments in #7643, I have trie...
-
- duplicate of #7643 ?
-
- I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I think it is related to #8403...
-
- I am having the same problem. It occurred in QGIS 1.8 and still seems to exist in 2.0. I agree it might be related to...
-
- Hi all, There is a modification in behavior of this patch (https://github.com/qgis/QGIS/pull/980).
Now, it contains ... -
02:26 PM Bug report #6369: vsizip - relative paths not used & can't update path in "missing layers" dialogue
- I am the author of this functionality and I'll try look into this eventually...
-
- I can confirm this is still the case in QGIS 2.0.1
Especially that vsizip datasets can't be repaired when asking to ... -
01:49 PM Bug report #9169: Grass raster values not identified properly
- Is appears that you don't have the GRASS GDAL plugin installed. I am using QGIS and GRASS from KyngChaos. If you have...
-
08:26 AM Bug report #9202 (Closed): Can't write from python in integer fields of sqlite (not spatial) tables
-
- Ouch. Shame on me. It has been fixed already. I was launching "installed" qgis instead of the builded qgis.
Should i... -
- I build qgis from source, commit 221263db95fc on Dec 8, and i'm still having this issue. Maybe a 32bit problem?
I at... -
- Just tested here (64bit Fedora)
* spatial layer: has no @intfield@ attribute and therefore the code fails for this
*... -
- See Attached SLD. If I load it against my data (can't share that I'm afraid), QGIS just renders it all as grey. Looki...
-
- During a course students with QGIS Dufour 64 bit (on Windows 7) reported crashes when using "QgsVectorDataProvider::a...
-
- landry - wrote:
> works fine on openbsd.
and works fine here on both Linux and Windows. -
01:36 AM Bug report #9200: Failure to display orthoimagery on windows in png or jpg format
- yes i have a limit on the server to prevent insane usage (ie MAXSIZE 3600 in mapfile) but the requests made by qgis i...
-
01:35 AM Bug report #9207 (Closed): window/panel resize problem
- I'm using QGIS 2.0 on a Panasonic Toughpad, running Android 4.0.3.
I once 'full-screened' my Layers panel and now it...
2013-12-11
-
- Works for me on 32-bit Windows and QGIS 2.0.1.
-
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- here, on Windows 64bit and qgis 64bit (both 2.0 and master) it works as expected.
The server seems to have a limit a... -
- Fully reproducible on two qgis 2.0.1 installs on windows, try to load the public 'http://wms.craig.fr/ortho' server, ...
-
- One part of the fix could be
outFields = vector.combineVectorFields(layer,layer2)
-
- The 'results viewer' shows empty 'R plots'. This problem is very similar to what was reported 1 year ago (Bug #5882)...
-
09:51 AM Bug report #9169: Grass raster values not identified properly
- rcline - wrote:
> This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released... -
- Fixed in changeset commit:"bdb560c05a9c3fc364339229e3377227b5ec86ae".
-
- On the Settings->Options->Network page, there's a item for "cache settings". It says "Size". This should state whatev...
-
- QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn...
-
- QGIS doesn't validate the capabilities. But the response from the server is missing a content type and so QGIS doesn...
-
- Following from - http://osgeo-org.1560.x6.nabble.com/WMS-layer-not-working-in-QGIS-td5093606.html
The WMS at this U... -
- Can you share the data that causes the issue?
-
- Can you share the data that causes the issue?
-
- Can you share the data that causes the issue?
-
- There is an issue with large complex vectors and the Select by Location tool.
I have a polygon which has 350,000 no... -
- I'm using the python console to automatice a process that includes copy values from a dbf layer to a sqlite (non spat...
-
- as it works now, a centroid is generated for each part of multipart polygons.
-
- Following from #9134
I'd suggest that only one column should be shown "Label". If label is empty then show the Objec... -
- One more quirk:
add view from add layer dialog => CAN edit (once fix the case issue),
<datasource>dbname='./OSP_Des... -
- Turns out, it's not a QGIS regression, it's an unintended side effect of a change in Spatialite 4.
https://www.gaia-... -
- Nicolas Cadieux wrote:
> See #9156. Both issue seem related.
this is fixed in qgis master. -
- other services that can be tested
http://www.pcn.minambiente.it/PCNDYN/catalogowcs.jsp -
- On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service...
-
- On QGIS master the WCS client seems really broken, I cannot add any layer (on both Linux and Windows) by this service...
-
- Sorry Jürgen, I wasn't clear. This isn't a duplicate (I opened the other issue too) and applies to WFS too.
See the ... -
- WFS selection window already mentions WFS and the rest is a duplicate of #9192.
-
- WFS selection window already mentions WFS and the rest is a duplicate of #9192.
-
- QGIS has lots of "Add layer" dialogs which all look extremely similar. How about adding some big text somewhere (and ...
-
- I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU... -
- I bisected problem to the commit I indicated.
General test case:
1) Vector data set;
2) Raster data set with some NU... -
- Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc".
-
- For both the WMS/WMTS and WCS add-layer dialogs, the text at the top of the box says "Add Layer(s) from a Server". Wh...
-
- Fixed in changeset commit:"36c2f7f3a82e37547666ccd6b147de4f1b7253cc".
-
- 1) Open WMS\\WMTS dialog.
2) Click "New"
The "DPI-Mode" drop-down menu isn't available. You need to make whatever se... -
- Yep, this seems to be fixed in the weekly build. Thanks!
-
- 1) Connect QGIS WMTS to http://maps.warwickshire.gov.uk/gs/gwc/service/wmts
2) Add any of the three tilesets.
====
N... -
- Add "Referer" to the WFS and WCS new connection dialogs.
Possibly considerable as a bug because it's inconsistent wi... -
- "Edit", "Delete" and "Save" are also not greyed out at this point.
-
- 1) Add a server to WMS/WFS/WCS dialog
2) Delete that server (so there are now no servers)
The "Connect" button is st... -
- 1) "New" WMS/WFS/WCS connection
2) Only enter a "Name"
3) Can now press "Ok" - but the URL hould be mandatory as it's... -
-
03:08 AM Bug report #7495: compile error with Qwt 6.1
- It seems the error goes to QwtPolar - which needs to be built against Qt4. After I have recompiled QwtPolar and used ...
-
- Xavier Fung wrote:
> and a partial revert of the CMakeLists.txt changes in the above changeset.
Why? That should on... -
- looks like qwtpolar (or something else) is built against qt5, while qgis is built against qt4.
-
- I can build with external qwtpolar (using qwtpolar-svn) and a partial revert of the CMakeLists.txt changes in the abo...
-
01:05 AM Bug report #7495: compile error with Qwt 6.1
- fortunately, qwtpolar 1.1.0-rc1 has fixes for qwt 6.1.0 (http://sourceforge.net/p/qwtpolar/code/commit_browser) - qgi...
2013-12-10
-
- ArchLinux and Fedora 20 now offers Qwt 6.1.0. Is it possible to update QwtPolar to support Qwt 6.1.0?
-
08:04 PM Feature request #9188 (Closed): Add Inkscape-like color selection
- The selection options that [[inkscape|http://inkscape.org/]] uses in the "Fill and Stroke" menu for flat color would ...
-
06:11 PM Bug report #8964 (Reopened): GDAL Translate Problem on QGIS 2.0.1
- See #9156. Both issue seem related.
-
- See #8964
-
- Hi,
I also noticed that the -of switch is always on Gtiff even if a different file format is selected. If, for exampl... -
- Duplicates #6210
-
- Duplicates #6210
-
- Duplicates #6210
-
- Duplicates #6210
-
- Gavin Fleming wrote:
> I'm getting this same error with QGIS master. With my own geoserver WCS I get
>
> WCS provid... -
- Fixed here.
commit from Oct 16 is there and the context menu is not black (i.e. looks good).
2013-12-09
-
- Reasoning: 2.5D layers are not supported by the plugin, but still available as source layers in the settings. This fi...
-
- Fixed in changeset commit:"758f5e5df9b31f9586af24f152a4dfefba1784ef".
-
- v.clean now works after using Giovanni's settings (I used break instead of snap before) and moving the data out of a ...
-
- Jonas, I just had a look at your latest log (v_clean)
I hope you are not afraid of a short test involving the edit o... -
> @Giovanni: yes, running shortest path with the cleaned files you attached worked so it feels like I'm getting clos...-
- Jonas Ohlund wrote:
> @Richard Im pretty sure the data isnt corrupt.
the data is not corrupt, but it can have geomet... -
-
- It looks like cause of my issue is #777.
-
- Open vector layer and select one feature. Then open Python console and run the following commands:...
-
- The same issue for "Warp (Reproject)" tool.
-
- * Raster -> Projections -> Assign projection
* Select raster file
* Click button Select Desired SRS
Selecting SRS fr... -
03:15 PM Bug report #8185 (Closed): QgsRasterFormatSaveOptionWidget "validate" button returns always "Valid"
- It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid. -
- It works, I've tried on the latest master (commit:fc247672).
I close the ticket as invalid. -
03:11 PM Bug report #9183 (Closed): Wrong Icon when sorting a column in Attribute table
- Using Settings -> Options -> General and changing the Style from "Cleanlook" to any other Style did resolve my issue....
-
- This is Qt theme related to match the OS the theme is meant for. I use the Windows Vista theme and the sort order is...
-
- Sorting a columnshow a wrong side sorting indication
Sorting a field alphabetically (from null to z) should display... -
- fixed in master fc247672b059e04496986cb9a63429b3679e2c38
-
08:08 AM Bug report #9178: gdal_merge
- Thanks - this works! Hope it will be fixed.
Inserting this text
gdal_merge.bat -a_nodata -9999 -of GTiff -o "C:/Us... -
- What is the nodata value you are using, is it -9999 ?
Can you try to add the following to the command (by clicking o... -
- I have a problem while using gdal_merge from Raster>Miscellanious>Merge
While setting No data value the result comes ... -
- Done:
https://github.com/qgis/QGIS/pull/1024 -
- I get same crash in QGIS master.
I think that 'node tool' does not releases its 'QgsSelectedFeature' member after ro... -
06:40 AM Bug report #9181 (Closed): Crashes when trying to resume node editing after a rollback
- Repeatable crash! I'm using QGIS version 2.0.1 - Dufour, code revision ebebdf3. To create crash I do this:
Start QG... -
- The "Join attributes table" in "Vector general tools" fails to produce a correct attribute table if there are columns...
-
10:28 AM Bug report #3840: "additional no data value" has no effect (identify, raster calculator, histogra...
- I would not call it entirely new problem. I feel like these are all related. While true, that original negative fract...
-
- The new problem is not that additional no data value is ignored but that the original data source no data value (-999...
-
- Could you create +simple+ test project?
Does it work OK in 1.8? -
- While setting a style for a rasterDEM from 'Singleband Grayscale' to 'Singleband Pseudocolour' the range in Min Max c...
-
- rcline - wrote:
> This is a bug that seems to occur frequently on new installs. The problem appears to occur with all... -
- Before (see #9174) QGIS crashed when the Road Graph plugin was used on 2.5D shape files.
The crash is fixed, and 2.5... -
- Embarrassing - for me - You are correct!
I´ve been using a projector, and my screen has changed size.
Thanks!
Rega... -
05:47 AM Bug report #9179 (Closed): Info-tool in rasterDEM
- The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che...
-
- The horizontal scrollbar makes me supposing the second column with values is hidden beyond the right edge. Please che...
-
- The Info-tool does not show the values for coordinates or z-value
Using weekly from december 2. 2013.
http://screenc... -
- /KeepReference/ sounds better indeed.
-
- it might be useful in layer actions if you want to edit features.
Hence, you can create generic action without explic... -
-
- Duplicate of #8682 ...
2013-12-08
-
- Adding a non ascii character in a script content fails on load, even with declaring # -*- coding: iso-8859-1 -*- on f...
-
- implemented in master
-
- implemented in master
-
07:58 PM Bug report #8996 (Reopened): Composer crashes QGIS when setComposition() method called
- There is /KeepReference/ argument annotation in SIP that should take care of these cases: increase the reference coun...
-
- @Richard Im pretty sure the data isnt corrupt. Same shapes works fine with ArcGIS at school. Could the "strange chara...
-
- I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann... -
- I'm amazed with all your knowledge and grateful for your help. Internet is sure revolutionary in many ways!
@Giovann... -
- yep, confirmed here. The v.cleaned data works.
Thinking it was a data related issue, I already tried to resave the s... -
- Jonas Ohlund wrote:
> Hi again,
>
> Many thanks for your quick assistance! It worked with Richards dutch shape file ... -
Crash confirmed here. Attached shp files crash both 2.0 and current master on Linux.
Running QGIS via strace and ou...-
- Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ... -
- Hi again,
Many thanks for your quick assistance! It worked with Richards dutch shape file which brings me some hope ... -
- Yep, here on debian too: both 2.01 and master are working fine.
@jonas I'll sent you zip file with some dutch roads ... -
- it does not seems to crash while testing under Linux and Windows. Se please:
*) test on another platform and/or mac ... -
- Tim - I don't understand the issue you're trying to describe here as it seems to be working correctly for me. Can you...
-
- This is a bug that seems to occur frequently on new installs. The problem appears to occur with all of the GDAL raste...
-
- This is a duplicate of bug #4605. This has been a bug in QGIS on OS X since before 1.7 was released. As a work around...
-
- Jeremy Palmer wrote:
> Hi Alvaro,
>
> Thanks for the reply. In that case it might be worth stating on the slider lab... -
02:31 AM Feature request #8725: Speed improvement in the render of geometries for qgis
- Hi Alvaro,
Thanks for the reply. In that case it might be worth stating on the slider label that it is a advanced ex...
2013-12-07
-
- *New description:*
with the attached shape "vagkartan_sv.zip" the road graph plugin crashes QGIS (tested on multiple... -
- The new random colour ramp classified is great but there is one usability issue: the base symbol is not cloned. The e...
-
02:42 AM Bug report #8625: singlepart to multipart broken in QGIS 2.0/master
- QGIS 2.0.1
Same error.
Vector -> Geometry Tools -> Singleparts to multipart...
2013-12-06
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Radim, unfortunately your solution breaks exporting to PNG and JPEG images. Didn't test with other formats. See attac...
-
- Hi, summarizing, We have implemented several shortcut changes in QGIS desktop application in order to make more agile...
-
-
- I forgot to attach GeoTiff
-
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Just an update that this is still a problem with QGIS nightly build from OSGeo4W.
gdalinfo seems to report correct N... -
- Fixed in changeset commit:"ba76c99037d84fb0fbc7d3eea7a3a6bcc5f69148".
-
- I suspect the following report is connected to this bug:
http://gis.stackexchange.com/questions/58101/how-to-avoid-c... -
- Closed due to lack of information. Please reopen, if you can attach affected data. Thank you.
-
- I cannot remember any recent complaints about this issue. Is this still active?
-
- Fixed for the integer case. It seems to work here with real, so if there is also a problem, please reopen this and at...
-
- Fixed in changeset commit:"b92e1243399ec5df9ea173d65e7a6509085a1111".
-
- Nice. Let me know when you are done, I will happily review your changes.
-
- I start working on it, but I don't know how to assign it.
-
- Thanks Mathias for the reference :-)
-
-
- Add expression support to the size attribute and the diagram attributes.
2013-12-05
-
- cannot confirm, at least on linux qgis/master
-
- cannot confirm, at least on linux qgis/master
-
- cannot confirm, at least on linux qgis/master
-
- When viewing a GRASS raster in QGIS, the identify tool will display the band value for a couple of time, but will eve...
-
-
Well, I have a close button in the titlebar now :-)
see screenshot
if you now could explicitly set this buttons, c...-
- There was raster reprojector after renderer also using color 0,0,0,0 for no data.
-
- Fixed in changeset commit:"330b46b8a9291fd81d88f6ff8092003c7aac8234".
-
- Fixed in changeset commit:"fd6e37cdcf226a05ef3da83f4a0f91b6ad9479be".
-
- After retrieving the layers from a oracle db connection (in Add Oracle Table(s) dialog), it is possible to click a ch...
-
- File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
- File bugs in that plugin at http://sourceforge.net/apps/trac/geoing/
-
08:19 AM Bug report #9167 (Closed): Numerical Vertex Edit in 2.0.1
- Hi,
the Numerical Vertex Edit appears to have a bug.
I edit a point shapefile and change the coordinates of the poi... -
08:18 AM Bug report #9138 (Closed): QgsGeometry.convertToMultiType() fails
- Fixed in changeset commit:"63c62adf213a9f1b1ba9cc07d4d7ae904e392503".
-
- I wonder if we should change all the QgsFields methods from [] to .value() which does check if the index exists at th...
-
- Fixed in changeset commit:"f428c869a980cc707da1fe96e2ba8ba763af78c6".
-
-
- Not reproducable here. Tried joining a shape with a csv and renamed the csv field on windows 64bit. no crash.
-
- If you have invalid field names in the expression of a label in a layer, QGIS will crash at start.
The crash occurs i... -
- Should be fixed in commit:f2fbb2f with help of the methods mentioned by EvanR/Etienne.
I could not reliably reproduc... -
- Should be fixed in commit:0bfc766488
-
- screen:
!http://i.imgur.com/beEcsO0.png!
printed:
!http://i.imgur.com/zdA79vGh.png! -
- When using curved labels on lines, labels are displayed correctly on screen but printed one above the other.
Weird......
2013-12-04
-
- Should be fixed in commit:e1186f164d. Please test.
-
- This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to...
-
- This is strange, because I have close button under Linux (screenshot attached) with OpenBox. Maybe this is related to...
-
- noone noone wrote:
> Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a k... -
- Thanks for discussing and fixing this issue :) But IMHO this shows that QGIS currently lacks a keymap reference to av...
-
12:25 PM Bug report #9134: customization menu doesn't work
- I'm not able to write that code, sorry...
Maybe someone else can help with this issue, I think it wouldn't take much... -
- matteo ghetta wrote:
> Do you plan to do the same work with the Raster menu?
Not really. Could you create pull reque... -
- I could not find your commit in my git log, but I can read Copy in a black block here on master (linux).
Is there a ... -
- +1
I think we should maybe start some UI design group which could have a look into this kind of things, and formula... -
- hi, can you maybe share some dataset for which this is happening?
can you maybe also try on another computer or OS?
... -
- In fact,
I tested typing a sql query directly in the qgs file, and it fails to load project, when doing the same wit... -
- Hi all,
I miss the ability to create a datasource from a custom SQL query in Oracle.
Extending DBmanager (or have a... -
04:59 AM Feature request #8500: Add the ability to get the original GetfeatureInfo and GetLegendGraphic fo...
- Am I the only one interested in this bug? I miss the possibility to add external WMS layers to my projects and to hav...
-
04:54 AM Bug report #9162 (Closed): Crash when typing something into python editor
- When I write something into the python editor, QGIS crashes. When running from the command line, i get this warning:
... -
- Good point Matthias, maybe in a case where the new scale would be larger than the current scale the map should only pan.
-
- Considering your example: If you load Europe and want to zoom to an address in Berlin Kreuzberg but you are currently...
-
- H Matthias and Richard,
I had 1% in mind and was thinking of having a user-setting for this, if this setting is not ... -
Well, on a osm dataset, or another huge dataset you would not so easily select one point to pan to it (I think). So ...-
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
- you have an issue with your Saga installation
Warning 1: libtiff version mismatch : You're linking against libtiff ... -
02:55 AM Bug report #9161 (Closed): Gridding from SAGA fails. Output layers could not be open.
- Hi.
I'm using Qgis 2.1.0 and SAGA 2.1.0 modules. When processing the module Gridding/inverse distance(and more) I get...
2013-12-03
-
- Hi Bernhard,
How would you imagine this relation?
Would that work on e.g. an OSM dataset? -
- To reproduce: load a point layer, select one feature in the table and click "Zoom to selection"; the map is panned bu...
-
- I think an online resource is not feasible for this, because these expressions are mostly very data specific, and not...
-
10:07 PM Feature request #7878: Windows 8 Location Provider GPS Support
- As I expected it was the crap driver from DELL. I made it work with new driver from Lenovo - 19.14.8401.4 24 Nov 2012...
-
- Dbmanager currently reports a bunch of hints for optimising PostGIS tables, such as missing geometry indexes and tabl...
-
- Fixed in changeset commit:"bc825b4b46af8d8810abc4b5552921e891bf7bcf".
-
01:18 PM Bug report #9158: lpad() and rpad() functions do not work in standard way
- http://www.orafaq.com/wiki/LPAD_and_RPAD
http://www.postgresql.org/docs/9.1/static/functions-string.html -
- In PostGIS and Oracle, lpad('A', 5, 'x') produces 'xxxxA'. In the expression editor in QGIS, it produces 'Axxxx'. Sim...
-
- I added conversion to UTF-8 to WMS provider.
We should make QgsGmlSchema and QgsGml to support any encoding, probab... -
- Fixed in changeset commit:"9d17f25521d675d356ecde4a383d82ae28070df9".
-
- Jukka Rahkonen wrote:
> Why not to make InfoFormat selectable in the WMS server settings?
It could be useful but the... -
- Fixed in changeset commit:"a4c365c7cf9f4bb0a5811712d3c514a267363975".
-
- Materialized views don't appear in geometry_columns, but this is a fault of PostGIS. When PostGIS gets fixed, would t...
-
- Hi
Now we have all updated to the 2. december version - and now it works.
We also enconutered that we were unable to ... -
09:40 AM Bug report #9143: Label Expression Dump program
- I can not reproduce crash with 2.0.1 release on Mac.
Lene, do you have a custom Python expression function that is b... -
> All "weeklies":http://qgis.org/downloads/weekly/?C=M;O=D are standalone installer snapshots from osgeo4w.
yes I k...-
- Giovanni Manghi wrote:
> Lene Fischer wrote:
> > Hi Giovanni,
> > I´m using a total brand 'new' installation from wee... -
- Lene Fischer wrote:
> Hi Giovanni,
> I´m using a total brand 'new' installation from weekly. And my studets the same.... -
- Hi Giovanni,
I´m using a total brand 'new' installation from weekly. And my studets the same.
Regards
Lene Fischer -
- I asked a proposal to Martin Dobias to clean the legend code, API and UI.
If everything goes well, project should sta... -
- Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d... -
- Hi Radim,
thanks for your work, well done!
Now it is possible to customize entirely the Vector menu. Do you plan to d... -
- Fixed in changeset commit:"999a996b733925c78082ffdbd66afea2b7a2c813".
-
- Is this an issue that will be solved? Or maybe it needs some hints on the GUI/help side?
-
- It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ...
-
- It looks like a MSSQL provider issue. I don't have an MSSQL server to experiment with. Let's hope somebody with this ...
2013-12-02
-
- Hi, there are new proposed improvements in 'node tool' to select and delete nodes of current feature in more agile wa...
-
- A few weeks ago this issue (very slow creation of the SL databases) have been fixed in QGIS master, but apparently th...
-
- open the gdal translate tool, activate the "creation options" checkbox and then add an option.
As you will see this... -
- see attached image
-
- it would be very nice if in addition to the "polygon to lines" tool there would be a "polygon to edges" tool.
When m... -
- Add a geometryless table in a group. The table is given its special icon. Now uncheck and then check the group. The t...
-
- Pick the attached input files. Geometries are ok, at least qgis say so.
Now run a symmetrical difference.
If does n... -
- Take the linked sample data and run the zonal stats tool.
https://www.dropbox.com/s/jb452t5e64j6m70/zs.tar.gz
The r... -
- Ok. I'll be waiting.
Ciao. -
- Marcel Foelsch wrote:
> Can I do anything to make it right?
not necessary, I think I already isolated the issue.
I ... -
- Can I do anything to make it right?
-
- The log does not appear to be the one right for the attached model (the log shows GRASS modules, the model has only S...
-
- Here it is...This is a model that worked fine some updates before...
-
- Hi, can you share the model?
-
- I tried it but without success...
new log:... -
- Marcel Foelsch wrote:
> Sorry...it's my first ticket.
no problem :)
can you try put your input data in a shorter p... -
- Sorry...it's my first ticket.
log:... -
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- please configure processing to leave the Window open after it runs a module so you can access directly the log and th...
-
- When I'm using the raster caculator without the modeler it works fine. When I'm using the saga raster calculator in m...
-
04:19 AM Bug report #7209: WCS client seems broken
- I'm getting this same error with QGIS master. With my own geoserver WCS I get
WCS provider: Cannot get test dataset... -
> How to solve this?
the tool is broke, so you may want to a) wait for the fix or b) support its fix
-
- On QGIS 2.0.1 synchronization problem remains (OS Ubuntu 12.04, Debian Wheezy).
Using qgiscloud plugin uploads a pos...
2013-12-01
-
- Fixed in changeset commit:"f21562c86f1cdbf8181176904e382f26aafb1da9".
-
- Hi, I have tried to bring together all the comments and I have updated the pull request (https://github.com/ahuarte47...
-
- Nathan Woodrow wrote:
> Well I think you only need to catch it in node tool, everything else just ignores it.
Hi Nat... -
- Well I think you only need to catch it in node tool, everything else just ignores it.
-
- Alvaro Huarte wrote:
> Nathan Woodrow wrote:
> > Alvaro Huarte wrote:
> > > Hi, We can not use Delete for deleting a ... -
- Nathan Woodrow wrote:
> Alvaro Huarte wrote:
> > Hi, We can not use Delete for deleting a node if we use Delete for d... -
- Alvaro Huarte wrote:
> Hi, We can not use Delete for deleting a node if we use Delete for delete selected features to... -
- Hi, We can not use Delete for deleting a node if we use Delete for delete selected features too, as Giovanni said abo...
-
05:15 PM Bug report #9149 (Closed): Overlay and Soft Light blend modes do not blend with vectors
- Upon further testing it appears that I am incorrect; blend modes seem to be working as intended. I will reopen if I f...
-
- It appears I am not used to Redmine's formatting. Could someone with the appropriate privileges please correct it for...
-
- h1. Expected behavior
When overlaying a raster on top of a vector layer, the *Overlay* and *Soft Light* blend modes s... -
04:34 PM Bug report #9148: Data Defined Label Locations NULL value doesn't work as expected with SQL Serve...
- Found a work-around: if you use a varchar to store the LabelX and LabelY then QGIS behaves as expected.
-
- Steps to reproduce issue:
# Set up a layer in SQL Server with columns for LabelX and LabelY as float with NULL as de...
Also available in: Atom