Activity

From 2013-08-20 to 2013-09-18

2013-09-18

07:21 PM Bug report #4375: Zoom to layer extent does not work for a point layer with a single point.
> But note that "Zoom full" does work if this is the only layer.
Not anymore. But if you select the point then zoom...
Alister Hood
04:41 PM Bug report #4509: Crash on SPARC when opening vector layer
patches updated and partly applyed in https://github.com/mbernasocchi/QGIS/tree/androidFixByteAllign. I'll pull reque... Marco Bernasocchi
04:39 PM Bug report #4509: Crash on SPARC when opening vector layer
this is also valid for android Marco Bernasocchi
09:21 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Giovanni Manghi wrote:
> master is now tagged 2.1
But that's not the one available in the official QGIS repository f...
Mathieu Basille
09:19 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
master is now tagged 2.1 Giovanni Manghi
09:18 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Giovanni Manghi wrote:
> please update to qgis 2.0.1 or master, try again and report back.
Well, as far as I can tel...
Mathieu Basille
09:15 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
About GDAL, here is what QGIS says in the about window:
Compiled with GDAL/OGR 1.9.0 Used with GDAL/OGR 2.0dev
Mathieu Basille
09:15 AM Bug report #8628 (Feedback): DB Manager does not load PostGIS rasters using QGIS-master for Debian
please update to qgis 2.0.1 or master, try again and report back. Giovanni Manghi
09:12 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
I forgot to say: if I drag and drop a raster layer, or if I use the 'Add to canvas' option, nothing happens. No crash... Mathieu Basille
09:09 AM Bug report #8628 (Closed): DB Manager does not load PostGIS rasters using QGIS-master for Debian
I'm currently using the nightly repository for Debian (https://issues.qgis.org/projects/quantum-gis/wiki/Download#213... Mathieu Basille
09:12 AM Bug report #7697: GRASS commands, OS X not working
See my note here also:
https://gist.github.com/jctull/44d9ce4388fd485bfd5d
John Tull
08:40 AM Bug report #8620: Quantum GIS 1.8 removed after updates in Debian Wheezy
The breakdown of which packages are at 2.0.1 and which still at 1.8.0 is as follows, as far as I can tell:
Still at ...
Hugh Pumphrey
05:29 AM Bug report #8408 (Closed): GdalTools: Output format is already GeoTIFF
Minoru Akagi
05:29 AM Bug report #8408: GdalTools: Output format is already GeoTIFF
Fixed in commit:"c27d1c0" Minoru Akagi

2013-09-17

10:40 AM Bug report #7723 (Closed): Bookmark names not saved under Mac OS X
Andrew Brachman wrote:
> I am having the same issue Larry Shaffer. I am running Windows 7 on a Dell with 1.8.0.
aft...
Giovanni Manghi
10:40 AM Bug report #7723 (Closed): Bookmark names not saved under Mac OS X
Andrew Brachman wrote:
> I am having the same issue Larry Shaffer. I am running Windows 7 on a Dell with 1.8.0.
aft...
Giovanni Manghi
10:38 AM Bug report #7723 (Reopened): Bookmark names not saved under Mac OS X
I am having the same issue Larry Shaffer. I am running Windows 7 on a Dell with 1.8.0. Andrew Brachman
10:39 AM Bug report #8623: ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage.bmp stil...
Here's a neutral one with our logo and the slogan from the new website. Anita Graser
10:39 AM Bug report #8623: ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage.bmp stil...
Here's a neutral one with our logo and the slogan from the new website. Anita Graser
10:06 AM Bug report #8623: ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage.bmp stil...
It's also used for the weekly build. So we either need another one for master or one that is not tied to the 2.0 rel... Jürgen Fischer
08:56 AM Bug report #8623: ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage.bmp stil...
I suggest to use the same file for Unwelcome. Anita Graser
08:55 AM Bug report #8623: ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage.bmp stil...
Here's a new one which reuses the components in the new splash screen.
Jürgen please add it the the sources, thanks!
Anita Graser
03:01 AM Bug report #8623 (Closed): ms-windows/Installer-Files/WelcomeFinishPage.bmp & UnWelcomeFinishPage...
above files used in the standalone installer still mention Quantum GIS. Jürgen Fischer
10:19 AM Bug report #8627 (Closed): GRASS/processing does not work on Windows (standalone installers)
If installing QGIS 2.0 on Windows with the standalone installers, then GRASS will not be found by the processing tool... Giovanni Manghi
10:13 AM Bug report #8626 (Closed): the clip window in "raster -> extraction -> clip" is not semi-transpar...
it is now solid red. Tested on QGIS 2.0 and master on both Linux and Windows. Giovanni Manghi
10:11 AM Bug report #8625 (Closed): singlepart to multipart broken in QGIS 2.0/master
tested on both Linux and Windows... Giovanni Manghi
09:10 AM Bug report #8617 (Feedback): Crashes when switching layers
I cannot confirm on qgis 2.0(.1) on Windows and Linux, please update and report back, eventually attaching a sample p... Giovanni Manghi
04:09 AM Bug report #8620: Quantum GIS 1.8 removed after updates in Debian Wheezy
Correct. Due the package changes, Debian understands that as an update. The result is the qgis package removal. It se... Guilherme Ferrari
03:41 AM Bug report #8620: Quantum GIS 1.8 removed after updates in Debian Wheezy
Only QGis 1.8.0-3~wheezy1 AMD64 packages are missing in http://qgis.org/debian/pool/main/q/
Please restore QGis 1.8.0...
Mantas Kriaučiūnas
03:40 AM Bug report #8615 (Closed): Python error on startup (Windows 64-bit)
Fixed in the latest version of the installer. Paolo Cavallini
03:40 AM Bug report #8615 (Closed): Python error on startup (Windows 64-bit)
Fixed in the latest version of the installer. Paolo Cavallini
03:34 AM Bug report #8615 (Feedback): Python error on startup (Windows 64-bit)
Just tested on a fresh Windows 7 installation and I cannot confirm. Giovanni Manghi

2013-09-16

01:43 AM Feature request #8045 (Resolved): add unit test for startup options (pluginpath, configpath)
Thanks Larry for the fix and the improvements ! It works fine on Linux here.
Still Windows to test
Hugo Mercier
08:42 PM Feature request #8621 (Closed): The expression text box in the expression builder window should b...
Subject is self-explanatory. As the number of expression functions and possibilities are increasing, users a bound to... Mathieu Pellerin - nIRV
06:28 PM Bug report #8620 (Closed): Quantum GIS 1.8 removed after updates in Debian Wheezy
Hi. After an update on qgis packages (provided by Quantum GIS stable repository), the Quantum GIS has been removed fr... Guilherme Ferrari
05:23 PM Bug report #7327: dxf export drops elevation data
Sorry, actually I don't know if this issue is still around - My shape file was actually 2D so I had to use ogr2ogr wi... Alister Hood
01:19 PM Bug report #7327: dxf export drops elevation data
Can anyone get rid of the feedback tag?
This issue is still around, but #4381 isn't.
Alister Hood
12:59 PM Bug report #8619 (Closed): Raster Calculator does not handle decimal values
Using the raster calculator rarely, i'm not an expert, but I can't believe that this intended behavior:
Trying to mak...
Bernd Vogelgesang
04:14 AM Bug report #8617 (Closed): Crashes when switching layers
Since changing to
QGIS version 1.9.0-Master QGIS code revision ab6a232
Compiled against Qt 4.7.1 Running against Qt 4...
Patrick Dunford

2013-09-15

01:12 AM Bug report #8613: wrong .qgis2 permissions in ubuntu 13.04
It also happens on Ubuntu 12.04. Deleting ~/.qgis2 and running QGIS from the command line by typing "qgis" stops QGIS... Filipe Dias
04:18 AM Bug report #8613: wrong .qgis2 permissions in ubuntu 13.04
this is common issues on ubuntu installations, the .qgis2 is created with the wrong permissions. Giovanni Manghi
07:21 PM Bug report #8599 (Closed): QGIS trunk failed to build with PostgreSQL 9.3.0
I can confirm that this is no longer an issue as an updated package from Arch added back the required header file. Xavier Fung
03:28 PM Feature request #8045: add unit test for startup options (pluginpath, configpath)
Hi Hugo,
I have made some changes to the test. See "pull request":https://github.com/qgis/Quantum-GIS/pull/898 ("as ...
Larry Shaffer
03:51 AM Feature request #8045 (Feedback): add unit test for startup options (pluginpath, configpath)
It has been merged by Tim (commit:64c947b2f05da81d8a3a119132c8ba95669076f6
The only missing part is whether this new...
Hugo Mercier
03:51 AM Feature request #8045 (Feedback): add unit test for startup options (pluginpath, configpath)
It has been merged by Tim (commit:64c947b2f05da81d8a3a119132c8ba95669076f6
The only missing part is whether this new...
Hugo Mercier
01:01 PM Bug report #8615 (Closed): Python error on startup (Windows 64-bit)
The latest Windows 64-bit download fom "http://qgis.org/downloads/QGIS-OSGeo4W-2.0.1-Setup-x86_64.exe" has problems u... Steven Horner
07:09 AM Bug report #5861: Vector menu and Sextante -> ftools behaving inconsistently
Any feedback? Alexander Bruy
06:17 AM Bug report #7643: Empty console Output on R, under SEXTANTE
Alexander Bruy wrote:
> Closed for lack of feedback. Please reopen if necessary
so I tested both R 2.15.x and 3.x on...
Giovanni Manghi
04:21 AM Bug report #8371 (Closed): Change of the layer CRS not immediately applied on canvas
This issue seems fixed/gone. Giovanni Manghi
04:21 AM Bug report #8371 (Closed): Change of the layer CRS not immediately applied on canvas
This issue seems fixed/gone. Giovanni Manghi
02:10 AM Bug report #6483: Qgis crashes when trying to classify huge vector (postgis db) with Natural Brea...
Bug fixed thanks to fundings from Agence de l'Eau Adour-Garonne. Vincent Mora

2013-09-14

12:26 AM Bug report #8613: wrong .qgis2 permissions in ubuntu 13.04
Who owns @~torsten/.qgis2@? Jürgen Fischer
11:32 PM Bug report #8613 (Closed): wrong .qgis2 permissions in ubuntu 13.04
After an upgrade of qgis in ubuntu 13.04 qgis does not start normal.
At first there is the message:...
Torsten Eckart
12:18 AM Bug report #6483 (Closed): Qgis crashes when trying to classify huge vector (postgis db) with Nat...
Fixed in changeset commit:"7e171ef7b0eec2101c60671e7625cfea52688a7e". Tim Sutton
10:22 AM Feature request #8508 (Closed): QGIS Server: make nr of layers in layer cache configurable
Andreas Neumann
10:22 AM Feature request #8508: QGIS Server: make nr of layers in layer cache configurable
fixed in commit:7c9d8591e6f92671766a79ae2a21793a1782b1ea Andreas Neumann
09:33 AM Bug report #6018 (Open): fTools:Select by location is confusing, especially with an empty selection
Ok, now I see it. Giovanni Manghi
09:33 AM Bug report #6018 (Open): fTools:Select by location is confusing, especially with an empty selection
Ok, now I see it. Giovanni Manghi
09:33 AM Bug report #6018 (Open): fTools:Select by location is confusing, especially with an empty selection
Ok, now I see it. Giovanni Manghi
09:17 AM Feature request #8610 (Feedback): Add the possibility to create several styles for one layer
have you already explored the feature that allows you to write style for PostGIS layers into the DB, and change them ... Giovanni Manghi
02:27 AM Feature request #8610 (Closed): Add the possibility to create several styles for one layer
one user could create a style for one layer, give it a name and add another one. User can switch from one style to an... Yves Jacolin
08:38 AM Bug report #7643 (Reopened): Empty console Output on R, under SEXTANTE
We confirmed this yesterday. I will send the log to Victor and/or attach it here together with few details. Giovanni Manghi
08:14 AM Bug report #7643 (Closed): Empty console Output on R, under SEXTANTE
Closed for lack of feedback. Please reopen if necessary Alexander Bruy
08:25 AM Bug report #8443 (Closed): CRS for new layers
It works now! Lene Fischer
07:22 AM Bug report #8443: CRS for new layers
I can't reproduce the bug on the latest master, is it still an issue? Leyan Ouyang
07:33 AM Bug report #8371: Change of the layer CRS not immediately applied on canvas
Is it still the case for you? With latest Master the changes I make to the CRS are directly visible in the canvas, bo... Leyan Ouyang
03:38 AM Feature request #7719 (Closed): add GML response to GetFeatureInfo in qgis mapserver
thanks! Giovanni Manghi
03:38 AM Feature request #7719 (Closed): add GML response to GetFeatureInfo in qgis mapserver
thanks! Giovanni Manghi
03:35 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
Can be closed ?
since 040e9d54cb4a08a19ee47226ead6beee5888f4ce
commit:040e9d54cb4a08a19ee47226ead6beee5888f4ce
René-Luc ReLuc
03:35 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
Can be closed ?
since 040e9d54cb4a08a19ee47226ead6beee5888f4ce
commit:040e9d54cb4a08a19ee47226ead6beee5888f4ce
René-Luc ReLuc
03:35 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
Can be closed ?
since 040e9d54cb4a08a19ee47226ead6beee5888f4ce
commit:040e9d54cb4a08a19ee47226ead6beee5888f4ce
René-Luc ReLuc
03:35 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
Can be closed ?
since 040e9d54cb4a08a19ee47226ead6beee5888f4ce
commit:040e9d54cb4a08a19ee47226ead6beee5888f4ce
René-Luc ReLuc

2013-09-13

01:22 AM Bug report #6018: fTools:Select by location is confusing, especially with an empty selection
Sorry, I forgot to provide feedback about this bug. Here is a screencast of what I mean.
Leyan Ouyang
01:00 AM Bug report #8609: HTML Annotation does not display HTML
They work for me here however you have to have a active layer before you add it otherwise it doesn't render.
Shoul...
Nathan Woodrow
12:38 AM Bug report #8609 (Closed): HTML Annotation does not display HTML
Using master / 2.1 setting the html page for an html annotation has no effect, the box remains white. I tested using ... Tim Sutton
10:53 AM Bug report #8607 (Feedback): saga grid volume algorithm
that is, the module produces as output just a value, printing it on screen. Try it from the command line. I don't kno... Giovanni Manghi
05:08 AM Bug report #8607 (Closed): saga grid volume algorithm
No output produced (only visible in the results dialog). matteo ghetta
08:43 AM Bug report #8601: sip: QgsFieldValidator::fixup has versioned and unversioned overloads
Hi, I've experienced the same error on ArchLinux... The attached patch should work for the sip 4.15.1, however due to... Dražen Odobašić
06:23 AM Bug report #8608 (Closed): Wrong information in UI for min and max Scale denominator
Label for the form to setup Maximum and minimum scale denominator (general tab in properties dialog of the layer) hav... Yves Jacolin
05:24 AM Feature request #8602: Clipper for multiple rasters
Perfect.
Thank you!
Luca Congedo
02:09 AM Feature request #8602 (Closed): Clipper for multiple rasters
Fixed in changeset commit:"9ce316dbd3359e5ba0ffd468b666be35b7360318". Alexander Bruy
04:32 AM Bug report #8593 (Closed): python-qgis removes QGIS
by the way the original issue was invalid, so I'm closing this. If something is wrong with sextante (but I doubt) ano... Giovanni Manghi
04:32 AM Bug report #8593 (Closed): python-qgis removes QGIS
by the way the original issue was invalid, so I'm closing this. If something is wrong with sextante (but I doubt) ano... Giovanni Manghi
04:29 AM Bug report #8593: python-qgis removes QGIS
Steven Horner wrote:
> Grass in QGIS works without any problems. Much faster in Ubuntu compared to Windows version.
>...
Giovanni Manghi
02:19 AM Bug report #4835 (Closed): Add watermarks to QGIS-server
Yes, it is implemented, so I'm closing the ticket. Marco Hugentobler
02:15 AM Bug report #4835: Add watermarks to QGIS-server
Is that was done for Version 2 ? René-Luc ReLuc
02:18 AM Bug report #4799: QGIS Server - GetMap URI inconsistency
I think this issues can be closed, isn't it ? René-Luc ReLuc

2013-09-12

01:28 AM Feature request #8602: Clipper for multiple rasters
It sounds good to me.
I have written the script for the Processing framework in attachment. I have also added the opt...
Luca Congedo
01:28 AM Feature request #8602: Clipper for multiple rasters
It sounds good to me.
I have written the script for the Processing framework in attachment. I have also added the opt...
Luca Congedo
10:32 AM Feature request #8602: Clipper for multiple rasters
I suggest to add it to Processing instead: it should be much easier and more flexible. Paolo Cavallini
02:45 AM Feature request #8602 (Closed): Clipper for multiple rasters
Hello everybody,
I have written a Python script for clippling multiple rasters at once using gdal_translate (see htt...
Luca Congedo
02:03 PM Bug report #8593: python-qgis removes QGIS
Grass in QGIS works without any problems. Much faster in Ubuntu compared to Windows version.
Still can't get GRASS t...
Steven Horner
01:34 PM Bug report #8593: python-qgis removes QGIS

> I could be on the wrong track.
it does not seems the issue to me, I use sextante/grass on several qgis master mac...
Giovanni Manghi
01:33 PM Bug report #8593: python-qgis removes QGIS
Steven Horner wrote:
> I have just tested a few more of the tools in the Processing Toolbox.
> I can run any QGIS geo...
Giovanni Manghi
01:56 PM Bug report #8605: Plugin installer: name column too narrow
It's name, not description. Let's fix the maximum width of name, description and about (the third tag to be probably ... Borys Jurgiel
01:47 PM Bug report #8605 (Closed): Plugin installer: name column too narrow
See attached image. Please note the incomplete description (in blue). Probably trivial to fix. Paolo Cavallini
01:51 PM Bug report #8606 (Closed): Data browser: all vector icons shown as polygons
Lines and points are shown incorrectly. Either use a more generic "vector" icon, or (better, but maybe more costly to... Paolo Cavallini
01:45 PM Bug report #8604 (Closed): Repeated number of elements in legend
In 1.8 the number is shown besides the symbol, in 2.0 both there and besides the name. Better remove one of the two.
...
Paolo Cavallini
01:36 PM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
Bernd Vogelgesang wrote:
> just to clarify: there was nothing to reproject. The layer and the project was in the same...
Giovanni Manghi
11:57 AM Bug report #3991: WFS 1.1 data is not displayed
http://www.xml.com/pub/a/1999/09/expat/?page=2
There are four built-in encodings in expat:
UTF-8
UTF-16
ISO-8859-1
U...
Evgeniy Nikulin
07:27 AM Bug report #3991: WFS 1.1 data is not displayed
If request is GetFeature (not GetCapabilities?!?!?) and xml encoding is not "utf-8", then data handler write error:
...
Evgeniy Nikulin
09:56 AM Feature request #6707: "Save as" - Allow to specify field names when they need to be shortened
Partial fix for this issue for joined fields available as https://github.com/qgis/Quantum-GIS/pull/888 Alexander Bruy
09:56 AM Feature request #6707: "Save as" - Allow to specify field names when they need to be shortened
Partial fix for this issue for joined fields available as https://github.com/qgis/Quantum-GIS/pull/888 Alexander Bruy
09:56 AM Feature request #6707: "Save as" - Allow to specify field names when they need to be shortened
Partial fix for this issue for joined fields available as https://github.com/qgis/Quantum-GIS/pull/888 Alexander Bruy
09:41 AM Bug report #6063 (Closed): ftools "Convex hull(s)": wrong attributes in output
Fixed in changeset commit:"033440fcfe9e9c46a0fa75de7c76561e1864f282". Alexander Bruy
06:52 AM Bug report #8590 (Closed): Copy and paste for rule based rendering
Fixed in changeset commit:"4a95d35606c087580f4737126b1a4c79e3361ea8". Nathan Woodrow
04:49 AM Bug report #8591: else condition for rules
Logic implemented in commit:02ed712b03de18a3
Not closing until the UI is cleaner. Just added ELSE to the expression...
Nathan Woodrow
04:25 AM Bug report #8598: pasting a group of composer items results in elements losing relative positioni...
Does this happen even if you paste objects with ctrl+shift+v? The object should mantain there orginal position with c... Alessandro Ciali
04:07 AM Feature request #2086: Topology level simplify tool
didn't someone do this in a plugin ? What was the name ? The feature request may be considered closed by such plugin... Sandro Santilli
04:07 AM Feature request #2086: Topology level simplify tool
didn't someone do this in a plugin ? What was the name ? The feature request may be considered closed by such plugin... Sandro Santilli

2013-09-11

12:34 AM Bug report #8601 (Closed): sip: QgsFieldValidator::fixup has versioned and unversioned overloads
Compiling trunk with sip 4.15 got this error.... Xavier Fung
12:31 AM Bug report #8600 (Closed): QGIS 2.0 not working with NTLM proxy
When using the python plugin installer with QGIS 1.8 I could authenticate using our corporate NTLM proxy server by en... Jeremy Palmer
11:32 PM Bug report #8599 (Closed): QGIS trunk failed to build with PostgreSQL 9.3.0
Cannot build QGIS trunk version with PostgreSQL 9.3.0. The header file location has changed.
Scanning dependencies o...
Xavier Fung
11:04 PM Bug report #8591: else condition for rules
Work in progress
!else.png!
Nathan Woodrow
07:01 PM Bug report #8598 (Closed): pasting a group of composer items results in elements losing relative ...
In the Composer, if the user copies and then pastes a group of items (i.e. three labels), the pasted items will _all_... Mathieu Pellerin - nIRV
02:43 PM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
just to clarify: there was nothing to reproject. The layer and the project was in the same CRS. The difference was ma... Bernd Vogelgesang
11:24 AM Bug report #8592 (Open): Field Calculator: Nonsense values for $area and $perimeter

> So... in QGIS 1.8 works as expected even when reprojecting?
oh yes... so this is a BAD BAD regression...
Giovanni Manghi
11:24 AM Bug report #8592 (Open): Field Calculator: Nonsense values for $area and $perimeter

> So... in QGIS 1.8 works as expected even when reprojecting?
oh yes... so this is a BAD BAD regression...
Giovanni Manghi
11:24 AM Bug report #8592 (Open): Field Calculator: Nonsense values for $area and $perimeter

> So... in QGIS 1.8 works as expected even when reprojecting?
oh yes... so this is a BAD BAD regression...
Giovanni Manghi
11:19 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter

> So, it definately doesn't work with on-the-fly transformation for this shape!
ok confirmed.
So... in QGIS 1.8 ...
Giovanni Manghi
07:28 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
On my computer at home, this didn't happen as well. Today reinstalled QGIS from scratch, loaded the project and tried... Bernd Vogelgesang
02:22 PM Bug report #8593: python-qgis removes QGIS
Apologies for all these posts but checking /usr/share/qgis/python/plugins/processing/grass
It looks like files could...
Steven Horner
01:53 PM Bug report #8593: python-qgis removes QGIS
I have just tested a few more of the tools in the Processing Toolbox.
I can run any QGIS geoalgorithms, Geoserver/Pos...
Steven Horner
01:46 PM Bug report #8593: python-qgis removes QGIS
Thank you for the help.
Followed all your instructions but when I launch QGIS I got the following error when the spl...
Steven Horner
11:02 AM Bug report #8593: python-qgis removes QGIS
Ok, you have mixed up things, a common mistake but nothing serious.
First the Sextante plugin for qgis 1.8 is comple...
Giovanni Manghi
09:15 AM Bug report #8593: python-qgis removes QGIS
Thanks,
I followed the instructions on: [[https://issues.qgis.org/projects/quantum-gis/wiki/Download#26-Ubuntu]]
I ...
Steven Horner
04:54 AM Bug report #8593: python-qgis removes QGIS
Steven Horner wrote:
> I'm a Ubuntu newbie and using raring but I can't for the life of me get a version where it all...
Giovanni Manghi
07:27 AM Bug report #8597: model of composition made in 1.8 incompatible with composer in 2.1
I add a modele of composer made with Qgis 1.8. Benoît Couillet
07:24 AM Bug report #8597 (Closed): model of composition made in 1.8 incompatible with composer in 2.1
Hi,
I load composition modele (.qpt) made with QGIS 1.8 in the composer of Qgis 2.1 but it seems there are some bug...
Benoît Couillet
04:29 AM Bug report #8596 (Closed): Debian build problem with Master
The following has appeared in the past two days when building for Debian. All is well with compilation and testing t... Andy Wood

2013-09-10

11:51 PM Feature request #8595 (Closed): WMTS connections with authentification fails
I’m trying to establish a WMTS connection with authentification having the following url:
http://kortforsyningen.kms...
Lene Fischer
10:08 PM Feature request #8594 (Open): executeQuery on data provider
It would be handy to be able to do @executeQuery@ which would just pass the query to the provider and return a iterat... Nathan Woodrow
11:55 AM Bug report #8593: python-qgis removes QGIS
I'm a Ubuntu newbie and using raring but I can't for the life of me get a version where it all works. Not sure how to... Steven Horner
11:49 AM Bug report #8593: python-qgis removes QGIS
Steven Horner wrote:
> Have you ever tried batch processing with r.los, it always crashes for me and which QGIS versi...
Giovanni Manghi
11:37 AM Bug report #8593: python-qgis removes QGIS
Have you ever tried batch processing with r.los, it always crashes for me and which QGIS version are you using?
Steven Horner
11:34 AM Bug report #8593: python-qgis removes QGIS
trust me :) batch processing in sextante (now just "processing") works ok, I use it on both Linux and Windows Giovanni Manghi
11:32 AM Bug report #8593 (Closed): python-qgis removes QGIS
When installing python-qgis from the nightly build it removes qgis. Trying to install python support so I can get the... Steven Horner
11:32 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
I tested your vector with qgis 1.9 on linux a few days old, and with qgis 2.1 on Windows: I cannot confirm this issue... Giovanni Manghi
10:38 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
Here my simple layer:
2nd field is $area in 1.8
3rd field is $area in 2.1
4th field is $peremiter in 2.1
5th field is...
Bernd Vogelgesang
10:23 AM Bug report #8592 (Feedback): Field Calculator: Nonsense values for $area and $perimeter
Giovanni Manghi
10:23 AM Bug report #8592: Field Calculator: Nonsense values for $area and $perimeter
can you please attach sample data? This issue surfaced recently or it was already there in previous master/dev releas... Giovanni Manghi
10:21 AM Bug report #8592 (Closed): Field Calculator: Nonsense values for $area and $perimeter
Calculating an area field for a polygon layer in todays 2.1-dev from osegeo4w, the field is filled with strange 9-dig... Bernd Vogelgesang
05:13 AM Feature request #6707: "Save as" - Allow to specify field names when they need to be shortened
A feature to remap column names would be useful besides shortening column names for shape export. At the same time it... Andreas Neumann
04:49 AM Bug report #8591: else condition for rules
I'll have a look into this Nathan Woodrow

2013-09-09

11:45 PM Bug report #8587: Show/Hide labels command doesn't work any more
Hi all,
I have to apologise about the bug I opened. Now I undestand: I was clicking on the feature with Ctrl Key. Qt ...
Alessandro Ciali
10:47 AM Bug report #8587 (Closed): Show/Hide labels command doesn't work any more
Fixed in changeset commit:"5f61dd12feafe5d0a8634a819813fa5cc7cd5f4f". Larry Shaffer
10:40 AM Bug report #8587: Show/Hide labels command doesn't work any more
Hi Alessandro,
I can not verify on Mac either. However, I was able to reproduce the logging of the 'QUndoStack::endM...
Larry Shaffer
10:40 AM Bug report #8587: Show/Hide labels command doesn't work any more
Hi Alessandro,
I can not verify on Mac either. However, I was able to reproduce the logging of the 'QUndoStack::endM...
Larry Shaffer
04:49 AM Bug report #8587 (Feedback): Show/Hide labels command doesn't work any more
Works fine here, tested on master on both Linux and Windows. Can you attach sample data? Giovanni Manghi
11:21 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
Installed grass 6.4.3-3, I confirm that Qgis 64bit on win7 now is working fine.
Thanks
Alessandro Ciali
03:14 PM Bug report #8588 (Closed): problems with grass plug-in on QGIS 64bit
Try grass-6.4.3-3. Still this is a packaging problem in OSGeo4W (probably due to mingw64 being able to link .lib fil... Jürgen Fischer
03:14 PM Bug report #8588 (Closed): problems with grass plug-in on QGIS 64bit
Try grass-6.4.3-3. Still this is a packaging problem in OSGeo4W (probably due to mingw64 being able to link .lib fil... Jürgen Fischer
01:34 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
Gerhard Spieles wrote:
> Path in qgis-dev.bat leads to directory OSGEO4W --> = 32 bit.
> The standard path for 64bit ...
Giovanni Manghi
01:32 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
Path in qgis-dev.bat leads to directory OSGEO4W --> = 32 bit.
The standard path for 64bit is "OSGEO4W64".
Maybe, that...
Gerhard Spieles
12:54 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
I'm not sure if this is any help but when running the nightly build 64bit under Ubuntu.
If I try to run r.los under p...
Steven Horner
12:25 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
Can you add debug output from DebugView here? Everything it prints after you click OK in open mapset dialog until it ... Radim Blazek
12:22 PM Bug report #8588: problems with grass plug-in on QGIS 64bit
I get the same problem when trying to run a GRASS module from within Sextante (r.los) in my case. This happens on bot... Steven Horner
11:32 AM Bug report #8588: problems with grass plug-in on QGIS 64bit
Radim Blazek wrote:
> What exactly does not work?
> * GRASS layers visualization?
> * GRASS modules from plugin GUI?...
Giovanni Manghi
11:06 AM Bug report #8588: problems with grass plug-in on QGIS 64bit
What exactly does not work?
* GRASS layers visualization?
* GRASS modules from plugin GUI?
* GRASS modules from QGIS...
Radim Blazek
06:02 AM Bug report #8588: problems with grass plug-in on QGIS 64bit
I can confirm the issue on QGIS 64bit/osgeo4w. GRASS itself works, so it should really be a QGIS issue. Hopefully is ... Giovanni Manghi
11:14 PM Bug report #8507 (Closed): QGIS trunk failed to compile with sip 4.15
Fixed in changeset commit:"641359d3cb70706f367014648cd961e905bca2dd". Christian Urich
07:35 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
Run into the same issue (OSX 10.8 and sip 4.15.1)... Christian Urich
06:16 PM Bug report #8591: else condition for rules
Assigning to you Martin but I would like to chat about it at the HF. Nathan Woodrow
06:15 PM Bug report #8591 (Closed): else condition for rules
We really need a else rule for rule based rendering. Top level else should be a final fallback if no rules are true,... Nathan Woodrow
06:05 PM Bug report #8590 (Closed): Copy and paste for rule based rendering
If you need to make rules that all the same expression with slight changes it should be possible tot copy and paste a... Nathan Woodrow
03:18 PM Bug report #5944: Fail to build with SIP older than 4.10
Reminder Volker Fröhlich
08:55 AM Bug report #8589: QGIS not saving relative path correctly
If there in no common ancestor as in your setup (i.e. the only common part of the path is root '/') then there is no ... Matthias Kuhn
08:24 AM Bug report #8589: QGIS not saving relative path correctly
did some further testing, removed also .qgis and .config/QuantumGis dirs
But still absolute paths, if I just open a ...
Richard Duivenvoorde
08:10 AM Bug report #8589: QGIS not saving relative path correctly
yes, I removed .qgis2 dir AND .config/QGIS
in properties I set 'relative paths'. In debug I see this:...
Richard Duivenvoorde
06:51 AM Bug report #8589: QGIS not saving relative path correctly
fresh .qgis2 folder too?
Richard Duivenvoorde wrote:
> I do confirm.
>
> I do have a fresh build release_2_0 here,...
Giovanni Manghi
06:38 AM Bug report #8589: QGIS not saving relative path correctly
I do confirm.
I do have a fresh build release_2_0 here, and I'm not able to save relative paths.
BUT: neither with...
Richard Duivenvoorde
06:11 AM Bug report #8589 (Feedback): QGIS not saving relative path correctly
I cannot confirm, tested on both Linux and Windows with qgis master. Giovanni Manghi
06:11 AM Bug report #8589 (Feedback): QGIS not saving relative path correctly
I cannot confirm, tested on both Linux and Windows with qgis master. Giovanni Manghi
03:07 AM Bug report #8589 (Closed): QGIS not saving relative path correctly
Working with the 1.9 version nightly build when on the project properties I have saved paths to be relative but when ... Admire Nyakudya
06:18 AM Feature request #8537 (Feedback): snap when measuring
AFAIK this is already the case Paolo Cavallini
06:08 AM Bug report #6461 (Feedback): Help about functions missing
From a quick spot check, functions appear documented now: can this be closed? Paolo Cavallini
05:46 AM Feature request #1728 (Open): add r.li module
Paolo Cavallini
05:45 AM Bug report #1631 (Open): v.db.addcol: table not updated
Paolo Cavallini
05:45 AM Bug report #2718 (Open): selecting too large symbol size takes ages to display
Paolo Cavallini
05:44 AM Bug report #4415 (Open): Centroid in fTools different form centroid fill
This can be closed when properly documented. Paolo Cavallini
05:44 AM Bug report #4415 (Open): Centroid in fTools different form centroid fill
This can be closed when properly documented. Paolo Cavallini
05:43 AM Bug report #4586 (Open): Raster calculator: fails if file name has spaces
Paolo Cavallini
05:41 AM Bug report #7439: RGB spinbox not updated for borders
Could you please report it upstream? Thanks. Paolo Cavallini
02:19 AM Bug report #8429: WMS requests for maps that were never asked for.
These requests are GetMap requests, a legend is a GetLegendGraphic. Jonathan Moules

2013-09-08

01:48 AM Bug report #8588 (Closed): problems with grass plug-in on QGIS 64bit
On 64bit version of QGIS under windows, grass plugin doesn't work. Program crashes and a minidump is generated. Also ... Alessandro Ciali
01:43 AM Bug report #8587 (Closed): Show/Hide labels command doesn't work any more
Selecting Show/Hide label tool and clicking on a labeled feature results in no change and the following message log u... Alessandro Ciali
02:25 PM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
Stéphane Brunner wrote:
> I just see that QgsHttpRequestHandler hasn't any dependencies on QGis components than I thi...
Giovanni Manghi
11:50 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
I just see that QgsHttpRequestHandler hasn't any dependencies on QGis components than I think that's almost content o... Stéphane Brunner
10:10 AM Feature request #7719: add GML response to GetFeatureInfo in qgis mapserver
We also needs this feature than I start to work on it, but I see some design issue to implement it:
The method QgsWM...
Stéphane Brunner
06:30 AM Bug report #8586 (Closed): Too much titles in the Legend from QGIS-server when single-symbol rend...
Hi,
Actually qgis-server, when the render is single-symbol will return too much or noone label .
Infact actually th...
aperi2007 -

2013-09-07

01:29 PM Bug report #8585 (Closed): Converting from Raster to Vector > New CRS
isn't this duplicate of #8579 ?
Giovanni Manghi
01:29 PM Bug report #8585 (Closed): Converting from Raster to Vector > New CRS
isn't this duplicate of #8579 ?
Giovanni Manghi

2013-09-06

10:49 PM Bug report #8585 (Closed): Converting from Raster to Vector > New CRS
While converting a raster layer to Vector (Raster>Conversion>Polygonice) the program changes the CRS from ERTS 89 / U... Lene Fischer
12:38 PM Bug report #8579: Raster to vector create new CRS
Lene Fischer wrote:
> But I run it from the Rastermenu. And here it gives this result.
all the tools formerly known ...
Giovanni Manghi
06:56 AM Bug report #8579: Raster to vector create new CRS
But I run it from the Rastermenu. And here it gives this result. Has you transfered the bug to gdal/ogr?
regards
Lene
Lene Fischer
05:54 AM Bug report #8579 (Closed): Raster to vector create new CRS
if you run the process from the command line
gdal_polygonize.py /home/giovanni/Desktop/Raster1 -f "ESRI Shapefile" /...
Giovanni Manghi
05:54 AM Bug report #8579 (Closed): Raster to vector create new CRS
if you run the process from the command line
gdal_polygonize.py /home/giovanni/Desktop/Raster1 -f "ESRI Shapefile" /...
Giovanni Manghi
05:37 AM Bug report #8579: Raster to vector create new CRS
The file was too large.
Now raster and vector in a zip.
Regards
Lene
Lene Fischer
05:28 AM Bug report #8579: Raster to vector create new CRS
The raster missed - comming right now Lene Fischer
05:26 AM Bug report #8579: Raster to vector create new CRS
Lene Fischer wrote:
> Sample data Raster Diffe_Over5m.tif
> Differ_Over5mVektor.zip
in the zip there is only the vec...
Giovanni Manghi
05:25 AM Bug report #8579: Raster to vector create new CRS
Sample data Raster Diffe_Over5m.tif
Differ_Over5mVektor.zip
Lene Fischer
05:19 AM Bug report #8579 (Feedback): Raster to vector create new CRS
please attach sample data Giovanni Manghi
12:33 PM Bug report #8584: WFS 1.0.0 Client requests with FILTER fails against Geoserver
if it is a regression then is a blocker... for the next release (2.1). Giovanni Manghi
12:33 PM Bug report #8584: WFS 1.0.0 Client requests with FILTER fails against Geoserver
if it is a regression then is a blocker... for the next release (2.1). Giovanni Manghi
12:33 PM Bug report #8584: WFS 1.0.0 Client requests with FILTER fails against Geoserver
if it is a regression then is a blocker... for the next release (2.1). Giovanni Manghi
09:09 AM Bug report #8584 (Closed): WFS 1.0.0 Client requests with FILTER fails against Geoserver
The supposed bug concerns 1.0.0 WFS Client of QGIS 2.0 : WFS requests with filters fails against Geoserver (tested ve... Bernd Deckert
10:46 AM Feature request #7211 (Closed): New splashscreen for QGIS
we have got a new splash screen for the 2.0 release!
Thanks Anita and congrats for the new role!
refs: http://lists....
Salvatore Larosa
07:45 AM Feature request #8583 (Closed): No label "out of frame" in print composer option
Hello, this would be a very nice feature:
In the print composer, labels are not restricted by the frame of my comp...
Arthur Vignacq
07:30 AM Bug report #8580 (Closed): QGIS 1.9 Alpha - GeoJSON-Export problems with german interface
Fixed in changeset commit:"029927f08e748f829285a9e1806a9814e3995c71". Jürgen Fischer
07:23 AM Bug report #8582 (Closed): QGis 1.9 d2af494 - Problem loading a style
Jürgen Fischer
07:21 AM Bug report #8582: QGis 1.9 d2af494 - Problem loading a style
Duplicate of #3775
Can someone raise the priority of #3775? because it comes often in the lists and work around is n...
Regis Haubourg
06:01 AM Bug report #8582 (Closed): QGis 1.9 d2af494 - Problem loading a style
Problem loading a style categorized created earlier.
If you create a style and loads, has the problem that first, tha...
Nelson Ugalde Araya
03:51 AM Bug report #8429: WMS requests for maps that were never asked for.
I think this may be for the legend icon. Goyo D

2013-09-05

11:56 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
With this versions of packages makepkg works regulary
python-sip 4.14.7-1
python2-sip 4.14.7-1
sip 4.14.7-1
python-qs...
Jan Michalek
10:51 PM Bug report #8580 (Closed): QGIS 1.9 Alpha - GeoJSON-Export problems with german interface
Exporting a SHP to GeoJSON results with german interface in the following error:
@Export in Vektordatei schlug fehl.
...
Flo Ju
08:19 PM Bug report #8579 (Closed): Raster to vector create new CRS
Converting a rasterlayer with crs EPSG:25832 - ETRS89 / UTM zone 32N to a vectorlayer. The vectorlayer crs transform ... Lene Fischer
11:57 AM Bug report #8577 (Closed): Build error with testqgisappclipboard
Larry Shaffer
11:55 AM Bug report #8577 (Resolved): Build error with testqgisappclipboard
Larry Shaffer
11:55 AM Bug report #8577: Build error with testqgisappclipboard
Hi Radim,
Yes, that compiled and the following passed:...
Larry Shaffer
11:36 AM Bug report #8577 (Feedback): Build error with testqgisappclipboard
Please try with commit:9ebf1fe, I added the same what is used for main app. Radim Blazek
11:35 AM Bug report #8577 (Closed): Build error with testqgisappclipboard
Fixed in changeset commit:"9ebf1feea1c443cc34b3caf5a419e007f5a97923". Radim Blazek
10:36 AM Bug report #8577 (Closed): Build error with testqgisappclipboard
... Larry Shaffer
11:45 AM Bug report #8578 (Closed): qgis_qgisappclippboard test crashes with CPL_DEBUG=on
qgis_qgisappclipboard test does not pass if CPL_DEBUG environment variable is set on.
It was not happening when qgis...
Radim Blazek
09:31 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...

> it is anyway a issue so bad that should be treated like one :)
if it is a qgis issue, of course.
Giovanni Manghi
09:31 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
Sandro Santilli wrote:
> I see crashers not marked as "blockers", I think they should take precedence over this one.
...
Giovanni Manghi
09:15 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
I see crashers not marked as "blockers", I think they should take precedence over this one. Sandro Santilli
08:53 AM Bug report #8575 (Reopened): undefined references building master
Not yet completely fixed, call to qgisCrashDump() from QgisApp is still disabled. Radim Blazek
08:14 AM Bug report #8575 (Closed): undefined references building master
Giovanni Manghi
08:13 AM Bug report #8575: undefined references building master
Yep, that fixed it. Thanks Sandro Santilli
08:13 AM Bug report #8575: undefined references building master
Yep, that fixed it. Thanks Sandro Santilli
07:00 AM Bug report #8575: undefined references building master
Try with commit:0b1895463 Radim Blazek
06:38 AM Bug report #8575: undefined references building master
Still not completely fixed as of commit:2c2d6757 I still get:... Sandro Santilli
05:58 AM Bug report #8575: undefined references building master
Thanks Jef and sorry for problems.
Should I move qgisCrashDump() from main.cpp to static QgisApp::qgisCrashDump()?
Radim Blazek
05:40 AM Bug report #8575: undefined references building master
Radim Blazek wrote:
> I know probably, src/app/main.cpp must be excluded from that lib.
commit:2c2d675 fixes it, by ...
Jürgen Fischer
05:33 AM Bug report #8575: undefined references building master
I know probably, src/app/main.cpp must be excluded from that lib. Radim Blazek
05:32 AM Bug report #8575: undefined references building master
I have added shared lib for classes used in main app, so that they can be used in tests. At this moment however, the ... Radim Blazek
05:25 AM Bug report #8575: undefined references building master
I suspect it's related to the new shared lib.
At least reverting commit:250df51994ab7c938d5f2a27f2be843b89d97803 mak...
Matthias Kuhn
05:17 AM Bug report #8575: undefined references building master
For me it compiles, Jenkins also says last successful 135ef365693f http://jenkins.linfiniti.com/job/QGIS/lastSuccess... Radim Blazek
05:05 AM Bug report #8575 (Closed): undefined references building master
... Sandro Santilli
06:09 AM Bug report #8576 (Closed): PostGIS literal special character not escaped
When commiting a change to a PostGIS data source, for a text field, the "\\" special character is not escaped when tr... Vincent Picavet
03:25 AM Bug report #8002 (Reopened): Voronoi Polygons tool makes overlapped polygons
Hi I managed to reproduce this issue with a very small data set of 14 points on the master version today (QGIS-OSGeo4... Giles Collingwood
03:25 AM Bug report #8002 (Reopened): Voronoi Polygons tool makes overlapped polygons
Hi I managed to reproduce this issue with a very small data set of 14 points on the master version today (QGIS-OSGeo4... Giles Collingwood
03:25 AM Bug report #8002 (Reopened): Voronoi Polygons tool makes overlapped polygons
Hi I managed to reproduce this issue with a very small data set of 14 points on the master version today (QGIS-OSGeo4... Giles Collingwood

2013-09-04

12:35 PM Bug report #8572 (Closed): PostGIS Geography Type, ERROR: Invalid geography
Loading geography types in Master by adding a PostGIS Layer, nothing is displayed and the following log is given:
@Q...
Denver Pierce
08:52 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Nathan Woodrow wrote:
> I would use it even if the estimated bug is fixed. It is much faster then QGIS having to che...
Mike Gates
08:19 AM Bug report #8438: WMT-S Crashes when loading layer
Jeremy Palmer wrote:
> I managed to get it to crash with the back buffer disabled.
strange, enabling back buffer I g...
Salvatore Larosa
07:38 AM Bug report #7673 (Closed): Layer order not respected when embedding groups from a different project
Fixed in changeset commit:"e6a4f2f808709fc7a7daa4bac18d847333ce834c". Jürgen Fischer
06:58 AM Feature request #8570: Zoom map to the selected row from attributes table
Yes I know, of course. I think it's a matter of habit.
But we often select a feature by clicking on the margin, so i...
Rémi Bovard
06:26 AM Feature request #8570: Zoom map to the selected row from attributes table
You that there is the zoom to selected button in the table?
Is there much difference?
Andreas Neumann
02:39 AM Bug report #8569: Renaming a layer with features count
Yes I understand the meaning of the number displayed.
What I was pointing it's that when renaming the layer, this nu...
Rémi Bovard
02:18 AM Bug report #8569 (Feedback): Renaming a layer with features count
This seems to be the intended behaviour, beside the layer name there is the *total* number of features, beside the sy... Giovanni Manghi
02:18 AM Bug report #8569 (Feedback): Renaming a layer with features count
This seems to be the intended behaviour, beside the layer name there is the *total* number of features, beside the sy... Giovanni Manghi
02:28 AM Bug report #8484 (Closed): QGIS Server: Exclude composers in OWS tab does not work
Works nicely, pushed to master branch. Thanks, René-Luc! Marco Hugentobler

2013-09-03

01:34 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Pull request made :
https://github.com/qgis/Quantum-GIS/pull/867
René-Luc ReLuc
01:34 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Pull request made :
https://github.com/qgis/Quantum-GIS/pull/867
René-Luc ReLuc
01:29 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
>OK, can I propose a patch or directly update master ?
Could you make a pull request on github?
Marco Hugentobler
01:24 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Hi,
Yes - the blacklist behaviour was already in place before this bug appeared. Also, I think the blacklist is what...
Andreas Neumann
01:03 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
OK, can I propose a patch or directly update master ? René-Luc ReLuc
01:00 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Hi René-Luc
My preference is to change the element name and the behaviour (currently whitelist -> blacklist). I thin...
Marco Hugentobler
12:27 AM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Hi Marco,
I have threw a glance at the code and the list of excluded composers is stored in the element WMSComposerL...
René-Luc ReLuc
11:50 PM Bug report #8484: QGIS Server: Exclude composers in OWS tab does not work
Will this bug be closed before QGIS 2 branching ? René-Luc ReLuc
12:20 AM Feature request #8570 (Open): Zoom map to the selected row from attributes table
Zoom map to the selected row from attributes table when double click on the row number (left margin).
This is really...
Rémi Bovard
12:14 AM Bug report #8569 (Closed): Renaming a layer with features count
When renaming a layer with features count turned on, the number is part of the layer name. Rémi Bovard
04:50 PM Bug report #8487: manual CRS being overwritten by QGIS
commit:14f639d Adds the above CRS's Tim Sutton
04:19 PM Bug report #8487: manual CRS being overwritten by QGIS
Further to this, I have will insert the following CRS definitions into the srs.db. Due to the last minute nature of t... Tim Sutton
06:07 AM Bug report #8487: manual CRS being overwritten by QGIS
I mistakenly downgraded this earlier - the original bug this Issue describes is still a blocker until resolved. Gavin Fleming
05:26 AM Bug report #8487: manual CRS being overwritten by QGIS
Let's hang five on Tim's "Incorrect project definitions" above. Technically they are correct according to the EPSG bu... Gavin Fleming
04:10 PM Bug report #8567: SLD : an invalid sld is generated when exporting a polygon with fill styles
The patch is applied, thanks!
Please, the next time create a pull request on GitHub.
Giuseppe Sucameli
04:07 PM Bug report #8567 (Closed): SLD : an invalid sld is generated when exporting a polygon with fill s...
Fixed in changeset commit:"4bc1beb844cef09b5b58570a4e402a5c422bc32c". Giuseppe Sucameli
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:19 AM Bug report #8567 (Feedback): SLD : an invalid sld is generated when exporting a polygon with fill...
Hi, thanks for the patch. Would you mind make a pull request on github? here patches are likely to be overlooked. Giovanni Manghi
09:17 AM Bug report #8567 (Closed): SLD : an invalid sld is generated when exporting a polygon with fill s...
This was initially reported on the mailing list:
- http://lists.osgeo.org/pipermail/qgis-user/2013-August/023650.h...
Yewondwossen Assefa
03:52 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
I would use it even if the estimated bug is fixed. It is much faster then QGIS having to check the type each time yo... Nathan Woodrow
03:48 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
That's great. That will be useful until the bug gets fixed.
Thanks, Nathan.
Mike Gates
03:36 PM Bug report #8561: Node tool does not work well when change the active layer
Fix confirmed!
Thank you Nathan!
Pedro Venâncio
05:03 AM Bug report #8561 (Closed): Node tool does not work well when change the active layer
Fixed in changeset commit:"510f5cb037351e5b19e312457e5f684faac37746". Nathan Woodrow
02:07 AM Bug report #8561: Node tool does not work well when change the active layer
Then is a blocker. Giovanni Manghi
01:14 PM Feature request #8568 (Open): Mac trackpad functionality
How to steal a huge march on Google Earth and Maps? Handle Mac trackpad gestures! The Mac (iMac, MacBook) trackpad us... Charles Rethman
09:56 AM Bug report #8558: Switching CRS On The Fly messes up area calculations
Looking at #4564, my issue is similar, although more specific to 1.9 (2.0 alpha) because the Field Calculator is now ... Charles Rethman
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
07:37 AM Bug report #8558 (Feedback): Switching CRS On The Fly messes up area calculations
it seems duplicate of #4564 - please leave feedback. Giovanni Manghi
06:58 AM Bug report #8564 (Closed): context_help strings huge
The context help is very difficult to translate, as the whole text is in large blocks. Much of the same info is repea... Paolo Cavallini
06:02 AM Bug report #8311 (Closed): Layer display choice should default to "Field", not "HTML"
Fixed in changeset commit:"88d3adeafa7d088a3a9dafe898d4feac6aeaf652". Nathan Woodrow
05:07 AM Bug report #8473: Cannot rename layers in composer legend
I've tested a today compliation on Ubuntu, qgis is named fef175b, and it works. René-Luc ReLuc
04:40 AM Bug report #8473: Cannot rename layers in composer legend
Hi Lene,
Which is the revision code ?
The fix has been introduced in commit:7f8b259, so I think the last weekly shou...
Salvatore Larosa
04:27 AM Bug report #8473: Cannot rename layers in composer legend
Lene Fischer wrote:
> I have just downloaded weekly (03-09-13) Still the same problem. Is the correction not in the w...
Giovanni Manghi
04:05 AM Bug report #8473: Cannot rename layers in composer legend
I have just downloaded weekly (03-09-13) Still the same problem. Is the correction not in the weekly yet?
Regards
Len...
Lene Fischer
04:55 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Bug fixed thanks to fundings from Agence de l'Eau Adour-Garonne. Vincent Mora
04:35 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Thank you very much for this fix, Vincent Matthias Kuhn
04:35 AM Bug report #7441 (Closed): Measurements in degrees even when meters are chosen as map units
Fixed in changeset commit:"5329ad5896d5b23189f9603f11793c79fb147672". Vincent Mora
04:16 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Matthias, I updated the PR 778 and it fixes both what Regis observed and what you observed. Can you plz try it and co... Vincent Mora
03:00 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
On it, doing my best to have something in early afternoon. Vincent Mora
02:17 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Tim is going to branch for release today, any chance to have at least a temporary solution committed? Giovanni Manghi
04:51 AM Bug report #8551 (Feedback): QGIS-generated WKT CRS flooring real number coordinates
I just tested on qgis master (on Linux) with a projection that I know
+proj=tmerc +lat_0=39.66666666666666 +lon_0=-8...
Giovanni Manghi
04:51 AM Bug report #8551 (Feedback): QGIS-generated WKT CRS flooring real number coordinates
I just tested on qgis master (on Linux) with a projection that I know
+proj=tmerc +lat_0=39.66666666666666 +lon_0=-8...
Giovanni Manghi
02:37 AM Bug report #8562 (Closed): Crash when saving .qml file from the Style tab of Properties
fixed in commit:a2a2d7ac545e55fdc0b818afa3da43a3ec70d464
Please reopen if need !
Salvatore Larosa
02:19 AM Bug report #8562 (Closed): Crash when saving .qml file from the Style tab of Properties
When saving a new classified style as a qml file with different fill colours, QGIS 1.9 (build cae90cd) crashes. Previ... Charles Rethman
02:08 AM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Trevor Wiens wrote:
> Thanks for letting me know Salvatore. It is too bad however that for users not using the master...
Giovanni Manghi
02:08 AM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Trevor Wiens wrote:
> Thanks for letting me know Salvatore. It is too bad however that for users not using the master...
Giovanni Manghi
02:07 AM Bug report #8552 (Feedback): unavailable WMS url blocking project load
Have you tested qgis master? I recall that this may have been fixed there. Giovanni Manghi
02:07 AM Bug report #8552 (Feedback): unavailable WMS url blocking project load
Have you tested qgis master? I recall that this may have been fixed there. Giovanni Manghi

2013-09-02

01:39 AM Bug report #8561 (Closed): Node tool does not work well when change the active layer
Please see the screencast:
https://www.dropbox.com/s/ubn20f6fywrrtod/node_tool.avi
It happens in Windows and Linux, ...
Pedro Venâncio
01:09 AM Feature request #8560 (Open): Creating User-defined CRS codes --save them in PostGIS or SpatiaLit...
I am busy making a whole lot of Albers EA and Lambert CC customs projections for countries in Africa. I need them for... Charles Rethman
01:02 AM Feature request #8559 (Open): Doing calculations with CRS projections set "On The Fly"
If you have data in a certain projection--say long-lat WGS84--and you want to do a calculation that can only be done ... Charles Rethman
12:07 AM Bug report #8558 (Closed): Switching CRS On The Fly messes up area calculations
My data covers whole Southern Africa region -- South Africa up to DRC-- therefore it is stored in Long-Lat WGS84. How... Charles Rethman
12:06 AM Bug report #8557 (Closed): Untranslatable strings in Processing
Several Processing (AKA Sextante) strings are untranslatable.
Even in completed translations we still have:
Run, Edit...
Paolo Cavallini
12:01 AM Bug report #8553: Diagrams: Automated placement settings are not saved or loaded in the project file
There is a (rather unintuitive) checkbox "save settings to project" at the bottom.
IMO this could be totally removed...
Matthias Kuhn
01:28 PM Bug report #8553 (Closed): Diagrams: Automated placement settings are not saved or loaded in the ...
Steps to reproduce:
1.
Set "automated placement settings" (Diagrams --> Position tab --> Automated Placement Setting...
Andreas Neumann
11:56 PM Bug report #8554 (Closed): Diagrams: pie charts are sometimes scaled non-uniform
Fixed in changeset commit:"fef175b618dc5d7bc56008faeb648ea5d9bd7fc1". Matthias Kuhn
01:49 PM Bug report #8554: Diagrams: pie charts are sometimes scaled non-uniform
You can download a sample project here: http://www.carto.net/neumann/temp/diagramproject.zip Andreas Neumann
01:37 PM Bug report #8554 (Closed): Diagrams: pie charts are sometimes scaled non-uniform
When setting a minimum size for pie charts and printing or exporting to PDF some smaller diagrams (those at or below ... Andreas Neumann
11:35 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
Have the same problem on arch linux. There is an problem with new SIP API. I had try some older sip versions, but thi... Jan Michalek
09:48 PM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Providing zipped file containing both shapefiles used in testing for comment 34.
Thanks Vincent. Your explanation ma...
Neil Bower
02:45 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
That was unintended, indeed. I just tried with 2154, but it still gives me a city diameter of 2.5 cm, when switching ... Matthias Kuhn
02:22 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Matthias: can you my PR and try switching to 2154 instead of 2145? Vincent Mora
02:23 PM Bug report #8555: ftools 0.6.2 Intersection of points with polygons fails to produce output
Thanks for letting me know Salvatore. It is too bad however that for users not using the master, these bugs persist. ... Trevor Wiens
02:07 PM Bug report #8555: ftools 0.6.2 Intersection of points with polygons fails to produce output
Hi, this has been fixed in master (almost 2.0 version) a long time ago, getGeomType checks the wkbType == 1 [0]
You c...
Salvatore Larosa
01:55 PM Bug report #8555 (Closed): ftools 0.6.2 Intersection of points with polygons fails to produce output
Intersecting a points layer with a polygon layer does not produce any output.
line 978 of doGeoprocessing.py reads a...
Trevor Wiens
08:46 AM Bug report #8552 (Closed): unavailable WMS url blocking project load
I open a project that has a WMS layer defined, but I am offline. The project loads till it gets to the WMS layer then... Gavin Fleming
08:41 AM Bug report #8551 (Closed): QGIS-generated WKT CRS flooring real number coordinates
define a custom CRS (e.g. aea) with decimal parameters when saving as a shapefile, the prj and qpj files generated by... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
08:06 AM Bug report #8487: manual CRS being overwritten by QGIS
@craigleat: no, Tim is correct - we are proposing a new set of north-facing (or NO=north-oriented) definitions in add... Gavin Fleming
02:31 AM Bug report #8487: manual CRS being overwritten by QGIS
Tim,
For your proposed schema did you mean the following, as you appear to have them switched around?
Lo Hartebeesho...
craigleat -
02:00 AM Bug report #8487: manual CRS being overwritten by QGIS
There are a complex of issues, here I try to outline a roadmap to address them:
h1. Incorrect Proj4 definitions
/us...
Tim Sutton
05:34 AM Feature request #3121: print composer: allow generating the legend classes of only the visibile f...
+1. I didn't find this feature demand and created another topic. It is indeed a very useful fonction as deleting mult... Arthur Vignacq
05:23 AM Bug report #8550 (Closed): Huge icons on buttons in browser panel
See the attached screenshot. Do the buttons in the browser always have such huge icons, or is it only on my system? Alister Hood

2013-09-01

01:54 AM Bug report #8534: Unable to uninstall the Qgis
Dear Team,
Thanks for the update.
I am not noticed any error message during installation and I wrote that due to unin...
Thaha Ibrahimkutty
01:43 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
@Vincent,
Sorry, I'm a bit confused. I was under the impression, that your pull request fixes the behavior Régis o...
Matthias Kuhn
01:17 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units

Matthias: I'm not sure about the utility of this canvas unit selection. My best guess is that it allows the user to ...
Vincent Mora
11:31 PM Bug report #8487: manual CRS being overwritten by QGIS
Frank Sokolic wrote:
> For me, the issue is that the proj4 definitions in SRS.db for these South African CRSs are not...
craigleat -
07:46 AM Bug report #8487: manual CRS being overwritten by QGIS
I found a simpler solution though it wasn't easily apparent. It you specify +axis=enu explicitly (the normal north-or... Gavin Fleming
04:13 PM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
I agree with Giovanni, it would be important to have this problem solved to 2.0. Pedro Venâncio
12:00 PM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
sorry for the overzealous approach, forget my note! Salvatore Larosa
11:22 AM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
Hi Salvatore,
Not sure how that signal relates to the *@QgsVectorLayerEditBuffer.addedFeatures()@* public function.
...
Larry Shaffer
11:11 AM Bug report #8543: QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8 causes c...
Hi Larry,
this should not be hard to solve, I haven't a build environment under windows.
Anyone could try the follow...
Salvatore Larosa
10:41 AM Bug report #8543 (Closed): QgsVectorLayerEditBuffer.addedFeatures() function binding on Windows 8...
Repeatable steps:
# Put a vector layer into edit mode
# Add a feature
# Run commands in console...
Larry Shaffer
11:57 AM Bug report #8542: Plugin Manager initial sorting indicates 'by name' but it is not
Looks good here on Mac, too. Thanks Borys! Larry Shaffer
11:07 AM Bug report #8542: Plugin Manager initial sorting indicates 'by name' but it is not
Thanks a lot, fixed! Borys Jurgiel
11:07 AM Bug report #8542 (Closed): Plugin Manager initial sorting indicates 'by name' but it is not
Fixed in changeset commit:"43372c0eee7b5184907c0f56fb26af39815a468d". Borys Jurgiel
10:26 AM Bug report #8542 (Closed): Plugin Manager initial sorting indicates 'by name' but it is not
After initial Plugin Manager opening, contextual menu of plugin listing shows 'sort by name' checked, but it is not s... Larry Shaffer
11:53 AM Bug report #8536 (Feedback): copy from existing CRS does not copy
probably the same issue as here #8298 Please leave feedback. Giovanni Manghi
08:42 AM Bug report #8536 (Closed): copy from existing CRS does not copy
when created a new custom CRS, choose Add new CRS. Then Copy existing CRS. If you choose a CRS from the Recently Used... Gavin Fleming
11:10 AM Bug report #8548 (Closed): symbol level defaults not sequential
enable symbol levels when there are two levels and they default to 0 and 1. Enable symbols levels when there are thre... Gavin Fleming
11:05 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
duplicate of #4419
see also
https://issues.qgis.org/wiki/quantum-gis/Switching_from_Old_to_New_Symbology_and_Labeling
Giovanni Manghi
11:05 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
duplicate of #4419
see also
https://issues.qgis.org/wiki/quantum-gis/Switching_from_Old_to_New_Symbology_and_Labeling
Giovanni Manghi
11:01 AM Feature request #8547 (Closed): Unique value renderer needs improvement to make it as nice as it ...
It's nice having a unique value renderer available in master but it's still lots of clicks away and not intuitive to ... Gavin Fleming
10:52 AM Bug report #8546: default maximum scale shows nonsense value
just click the button "current" and you are good to go... Giovanni Manghi
10:49 AM Bug report #8546 (Closed): default maximum scale shows nonsense value
Open layer properties and set scale dependent visibility for the first time on that layer and the maximum scale appea... Gavin Fleming
10:47 AM Bug report #8545 (Feedback): rule-based style list does not show scale ranges in Linux
I can see it also on linux. Please post a screenshot. Giovanni Manghi
10:47 AM Bug report #8545 (Feedback): rule-based style list does not show scale ranges in Linux
I can see it also on linux. Please post a screenshot. Giovanni Manghi
10:44 AM Bug report #8545 (Closed): rule-based style list does not show scale ranges in Linux
In windows there is a column showing scale ranges of each rule but this is missing in Linux Gavin Fleming
10:41 AM Feature request #8544 (Closed): toggle each class in TOC
In the TOC view, it would be useful to be able to toggle a class on or off to assist with visualisation or data explo... Gavin Fleming
10:26 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
please post questions on the mailing lists, IRC or gis.stackexchange.com
anyway the answer is yes, qgis 2.0 will sup...
Giovanni Manghi
10:26 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
please post questions on the mailing lists, IRC or gis.stackexchange.com
anyway the answer is yes, qgis 2.0 will sup...
Giovanni Manghi
10:25 AM Feature request #8541 (Closed): are mrSID and ecw going to be available in Windows builds?
I've just done a QGIS course at a government agency where all their imagery is ecw or MrSID. If QGIS 2 ships with MrS... Gavin Fleming
10:20 AM Bug report #8540 (Feedback): 1.9 does not render the workshop van der Grinten
can you post a link to the workshops? Giovanni Manghi
10:20 AM Bug report #8540 (Feedback): 1.9 does not render the workshop van der Grinten
can you post a link to the workshops? Giovanni Manghi
10:18 AM Bug report #8540 (Closed): 1.9 does not render the workshop van der Grinten
In the linfiniti workshop, an exercise is to create the van der Grinten CRS as a custom CRS using Anita Graser's blog... Gavin Fleming
10:04 AM Bug report #8539 (Feedback): geometry collapsing due to intersection avoidance when filling polygons
are you on master? it is a regression since 1.8? Giovanni Manghi
10:04 AM Bug report #8539 (Feedback): geometry collapsing due to intersection avoidance when filling polygons
are you on master? it is a regression since 1.8? Giovanni Manghi
10:01 AM Bug report #8539 (Closed): geometry collapsing due to intersection avoidance when filling polygons
Edit a polygon layer with island rings. Set snapping such that digitising a new polygon around the ring fills the rin... Gavin Fleming
09:49 AM Bug report #8538: SVG symbols greyed out
Hi,
This is a known graphical bug in the way Windows renders (or doesn't in this case) SVGs. The new symbols are _in...
Larry Shaffer
09:39 AM Bug report #8538 (Closed): SVG symbols greyed out
In the layer style tab and elsewhere where available SVG symbols are shown,many of them appear greyed out. You can ju... Gavin Fleming
09:24 AM Feature request #8537 (Closed): snap when measuring
having the option to snap when measuring would enabling more accurate measurement when desired. If the measure tool c... Gavin Fleming
03:56 AM Bug report #8521 (Closed): DB Manager is not able to delete raster table
Fixed in changeset commit:"3ac0759b048504037174f48cfc70fb7f8d519cba". Salvatore Larosa

2013-08-31

01:46 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...

> Giovanni, could you also test the other providers, that the changes did not introduce any errors which have been m...
Giovanni Manghi
01:35 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Here is the create script for it:... Nathan Woodrow
07:12 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Woodrow wrote:
> Adding one of those will help with the table listing times in the dialog. Once you have one it wil...
Mike Gates
06:58 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Adding one of those will help with the table listing times in the dialog. Once you have one it will list all the tab... Nathan Woodrow
06:55 AM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Nathan Woodrow wrote:
> Do you have a geometry_columns table in your database?
No, I don't.
Mike Gates
01:27 AM Bug report #8174: Polygons digitized in Postgis layer with "Avoid Intersections" turned on still ...
I don't see anyone fixing this before the 2.0 release, I don't anyway understand how this issue does not raise more a... Giovanni Manghi
03:36 PM Bug report #8467: (OsX) Raster>Projection>Warp dies after one run
Hi,
I can not reproduce this with latest master on Mac OS X 10.7.5. Recently, the handling of QPyNullVariant return ...
Larry Shaffer
01:53 PM Bug report #8367: "missing font text" red message on layer labeling settings
Please verify if commit commit:4c402731 fixes the issue. Larry Shaffer
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
12:58 PM Bug report #8534 (Feedback): Unable to uninstall the Qgis
Plase give more details. Did you used the "standalone" installer? why you say that "qgis is not installed correctly"? Giovanni Manghi
09:32 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
... Neil Bower
03:59 AM Feature request #8535 (Open): SAGA Supervised Classification: add option "Get class statistics from"
Hello everybody,
it would be good (at least for the Semi-Automatic Classification Plugin) to allow for the selection...
Luca Congedo

2013-08-30

11:02 PM Bug report #8534 (Closed): Unable to uninstall the Qgis
Dear Team,
My PC Qgis is not installed properly,so i was trying to uninstall the program but i am getting the followi...
Thaha Ibrahimkutty
10:02 PM Bug report #8525: MSSQL spatial layer bug with estimated metadata
Do you have a geometry_columns table in your database? Nathan Woodrow
01:27 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
Whith update pacman I get the next error:... Samuel Fernando Mesa Giraldo
06:51 AM Bug report #8531: Raster trasparency setting not saved in the project
I cannot confirm with both Linux and Windows and (as example) the attached 8bit tiff. Giovanni Manghi
04:00 AM Bug report #8531: Raster trasparency setting not saved in the project
No, it doesn't work in the last 3 weeks of the master release.
leolami -
03:54 AM Bug report #8531: Raster trasparency setting not saved in the project
Yes, it works in 1.8. leolami -
03:54 AM Bug report #8531: Raster trasparency setting not saved in the project
I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013). leolami -
03:52 AM Bug report #8531 (Feedback): Raster trasparency setting not saved in the project
Giovanni Manghi
03:52 AM Bug report #8531: Raster trasparency setting not saved in the project
on qgis master? it used to work ok in previous master releases? Giovanni Manghi
03:49 AM Bug report #8531 (Closed): Raster trasparency setting not saved in the project
I have a project with several 8-bit TIFF.
I set a trasparency (100%) for one value of this TIFF and I save the proje...
leolami -
06:00 AM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Minoru Akagi
05:47 AM Bug report #8532 (Feedback): Problem to print as image a big map
Can you please test with qgis 64bit?
http://trac.osgeo.org/osgeo4w/
thanks!
Giovanni Manghi
03:57 AM Bug report #8532 (Closed): Problem to print as image a big map
Hi
I'm working with Qgis 1.9 dev - 8c4c57b (OsGeo4W 30/08/2013).
I'm tring to print (as png image) a A0 composer wi...
leolami -

2013-08-29

12:35 AM Bug report #7871 (Closed): The SVG marker window has several bugs related to SVG parameters
René-Luc ReLuc
09:07 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Good catch!
Will fix that now.
Nathan Woodrow
09:02 PM Bug report #8258 (Reopened): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Great works! Thanks, Matthias and Nathan!!
Now the evaluation of the following conditional expression is True.
<pre...
Minoru Akagi
08:32 PM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
This is as fixed as we are going to be able to do.... Nathan Woodrow
08:32 PM Bug report #8258 (Closed): QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
This is as fixed as we are going to be able to do.... Nathan Woodrow
01:09 PM Bug report #8438: WMT-S Crashes when loading layer
I managed to get it to crash with the back buffer disabled. Jeremy Palmer
02:28 AM Bug report #8438: WMT-S Crashes when loading layer
*More info:*
The crash here occurs by using any WMS/WMS-T on my laptop following the below steps:
* add WMS and clos...
Salvatore Larosa
12:19 PM Bug report #8093 (Closed): IGNF:LAMB1, 1C, 2, 2C, 2E, 3, C, 4, 4C error message
Bug has been fixed with issue #7941: there's a typo in env.bat from Grass package.
Hien TRAN-QUANG
12:08 PM Bug report #8487: manual CRS being overwritten by QGIS
I did a pull request [[https://github.com/qgis/Quantum-GIS/pull/838]]
Now createFromProj4 only checks for same parame...
Hien TRAN-QUANG
07:39 AM Bug report #8521: DB Manager is not able to delete raster table
I think here is enough a @DROP TABLE schema.tablename@.
it also removes the references to _raster_columns_ table.
Salvatore Larosa
07:27 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Fixed the trivial ones in commit:a9c05d7
Remaining problems are:
* Postgres: Field length and precision are not corr...
Matthias Kuhn
07:01 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Matthias Kuhn wrote:
> Giovanni Manghi wrote:
> > In SL I get the error also when creating integer fields even when l...
Giovanni Manghi
06:32 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Giovanni Manghi wrote:
> In SL I get the error also when creating integer fields even when leaving 0 as width, does t...
Matthias Kuhn
06:23 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Hi Matthias
> For now: As long as you don't change them (i.e. leave them set to 0) you should not get any warnings.
...
Giovanni Manghi
05:50 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
commit:2f2e088 solves this partially
The other half of the problem is, that the [qgis] spatialite provider indicates...
Matthias Kuhn
02:25 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
Giovanni Manghi wrote:
> For what it can matter I noticed that on a postgis layer there is no error just when adding ...
Giovanni Manghi
02:22 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
For what it can matter I noticed that on a postgis layer there is no error just when adding "numeric" and "decimal" f... Giovanni Manghi
04:31 AM Bug report #8480 (Closed): "The attribute could not be inserted. The name already exists in the t...
Fixed in changeset commit:"22eec4afe831f75f50b19e2c8de9082b76fce662". Matthias Kuhn
02:08 AM Bug report #8526 (Closed): complex/big geometry crashes qgis 32bit on load. Works ok on qgis 64 b...
Offending geometry here:
https://www.dropbox.com/s/nvn2xwe5b4er3xi/crash_win_qgis32.zip
Tested on master.
Giovanni Manghi

2013-08-28

12:12 AM Bug report #8438: WMT-S Crashes when loading layer
I can confirm this crash only seems to happen on layers that span the anti-meridian line. Could it be that the render... Jeremy Palmer
06:35 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
We can just do this:... Nathan Woodrow
06:29 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
You would think so but it's not the case.
We should be able to fix that by overloading the __eq__ method. Hold tight.
Nathan Woodrow
06:26 PM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
The evaluation of (None &#61;&#61; None) is True. But the evaluation of the following conditional expression is Fals... Minoru Akagi
04:35 AM Bug report #8258: QgsVectorDataProvider.uniqueValues returns not None but QPyNullVariant
Will now be:... Matthias Kuhn
02:10 PM Bug report #8524: Raster tiling offset in composer output from zoomed in resampling
I stand corrected. The offset is not visible in the main map canvas, but it does show up in the composer preview in a... John Tull
02:07 PM Bug report #8524: Raster tiling offset in composer output from zoomed in resampling
I repeated printing without the affected layer (sans heat map tif layer), and the tiling offset does not occur. I can... John Tull
11:10 AM Bug report #8524 (Closed): Raster tiling offset in composer output from zoomed in resampling
The composer is creating raster artifacts that appear to be from some form of tiling in both pdf and png outputs. See... John Tull
01:31 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
I made a Pull request for this blocker : [[https://github.com/qgis/Quantum-GIS/pull/836]]
Hien TRAN-QUANG
11:56 AM Bug report #8525 (Closed): MSSQL spatial layer bug with estimated metadata
It looks like there is a bug when connecting to MSSQL databases to add a spatial layer when using estimated table par... Mike Gates
10:22 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
It seems to be also a problem not related to QGIS/SEXTANTE, in fact I can replicate issues with the enconding just us... Giovanni Manghi
06:30 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
I can't download sample file, mentioned in previous comments, but this issue not reproducible here (Linux, GDAL 1.10.... Alexander Bruy
05:12 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Giovanni Manghi wrote:
> This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on...
Giovanni Manghi
04:41 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
This seems to be platform dependent, in fact I made a few tests now based on #6299-4 and on Windows I can always see ... Giovanni Manghi
07:55 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Yes, that fixes it.
Does it make sense to leave the option "meters" allowed in a case like this?
Matthias Kuhn
07:43 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
I can reproduce.
Apparently, when switching to 2154 (Regis initial choice), the canvas units (in project->prop->gene...
Vincent Mora
02:25 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
Hi Vincent,
I tested PR778, but I can still reproduce the behavior Régis described.
# Open attached project(mapunits...
Matthias Kuhn
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:56 AM Bug report #6918 (Reopened): qgis:dissolve - "dissolve all" does not dissolve attributes

> do rows in attributes table are dissolved too ?
no :(
Giovanni Manghi
06:33 AM Bug report #6918: qgis:dissolve - "dissolve all" does not dissolve attributes
Giovanni Manghi wrote:
> I also cannot confirm this, tested with different datasets on both Linux and Windows. Please...
Salvatore Larosa
05:45 AM Bug report #6918 (Closed): qgis:dissolve - "dissolve all" does not dissolve attributes
Anita Graser wrote:
> It's really odd, because if I run Dissolve directly in the toolbox and select "dissolve all" NO...
Giovanni Manghi
06:07 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Pedro Venâncio wrote:
> Hi Giovanni,
>
> Yes, I agree, it really isn't a regression. However, the use of r.quantile ...
Giovanni Manghi
06:00 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Hi Giovanni,
Yes, I agree, it really isn't a regression. However, the use of r.quantile with r.recode can lead to er...
Pedro Venâncio
04:08 AM Bug report #6379: HTML output does not work for Processing/GRASS modules
Pedro Venâncio wrote:
> Hi,
>
> As suspected, we can not directly use the output of r.quantile in r.recode. See this...
Giovanni Manghi
05:49 AM Bug report #4185 (Closed): Globe and zonal statistics plugins do not properly unload
Fixed in changeset commit:"bc63fcd374f1ad4d707bbe5eadfe59222366d37c". Alexander Bruy
04:52 AM Bug report #4011: Map canvas flickers when content is dragged
Good catch! Thank you very much.
The easiest thing is to start with the environment variable QT_GRAPHICSSYSTEM=X11, s...
Matthias Kuhn
04:42 AM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
Looks like duplicate of #2218. Please check before submitting new issue. Alexander Bruy
04:42 AM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
Looks like duplicate of #2218. Please check before submitting new issue. Alexander Bruy
04:40 AM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
Seems duplicates #4011 Alexander Bruy
04:40 AM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
Seems duplicates #4011 Alexander Bruy
02:16 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if I'm not wrong when can close this again... reopen if otherwise. Giovanni Manghi

2013-08-27

01:33 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
(OTF on/off) has been added to the title of the measurement dialog in PR778. Vincent Mora
01:02 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
*OGR Provider : DateTime* Blacklisted this datatype for ShapeFile in commit:a8a1090. Please help to extend the list f... Matthias Kuhn
08:45 AM Bug report #8481: "Errors: SUCCESS: 6 attribute(s) added. ERROR: field with index 4 is not the sa...
This is related to definitions of field types in the QGIS provider implementation which do not match the field type w... Matthias Kuhn
12:57 AM Bug report #8522: QGIS just shift operation, but the scale is changing, this is a bug!
If I understand, the complaint is:
In the map window, panning the map causes a change in the scale of the map.
If th...
ramon .
06:59 PM Bug report #8522 (Closed): QGIS just shift operation, but the scale is changing, this is a bug!
QGIS just shift operation, but the scale is changing, this is a bug! huaijun zuo
10:12 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
Hi,
Thank you for working on fixing this bug.
Regarding the preview: I would not change the initial symbol in the p...
Andreas Neumann
05:31 PM Bug report #7871: The SVG marker window has several bugs related to SVG parameters
Before I do a pull request, here is what I have done so far :
- SVG marker fill-color and pen-outline are correctly ...
Hien TRAN-QUANG
07:00 PM Bug report #8523 (Closed): When qgis map drag when very flicker , can optimize the solution under ?
When qgis map drag when very flicker , can optimize the solution under ? huaijun zuo
12:55 PM Bug report #8487: manual CRS being overwritten by QGIS
From what Leyan said, it seems that the error occurs when the custom CRS has too few parameters, compared to the foun... Hien TRAN-QUANG
09:47 AM Bug report #8521 (Closed): DB Manager is not able to delete raster table
When attempts to delete a raster table the following error raises:... Salvatore Larosa
09:11 AM Feature request #8520 (Open): data defined symbol levels
many styling parameters can be data defined. It would be really useful to be able to data-define symbol levels as wel... Gavin Fleming
07:59 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
> Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat ...
Benoit Laurent
07:06 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Launching QGIS is in fact calling qgis.bat (or qgis-dev.bat) which calls o4w.bat then grass\\etc\\env.bat.
o4w.bat s...
Hien TRAN-QUANG
05:36 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
> env.bat is automatically executed on start
It's time for the stupid question: when you write "on start", you mean ...
Benoit Laurent
04:35 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
so I guess we can re-close this one? Giovanni Manghi
04:30 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Hien TRAN-QUANG wrote:
> Ok, found the problem :
>
> Grass sets wrongly environment variable :
>
> in %OSGEO4W_ROOT...
Jürgen Fischer
04:27 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Grass' env.bat is called automaticaly after setting other setenv (python, gdal, and so on) and that typo overwrote th... Hien TRAN-QUANG
04:26 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Benoit Laurent wrote:
> Does executing the env.bat file after the correction you suggest solve temporarily the proble...
Jürgen Fischer
04:18 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Does executing the env.bat file after the correction you suggest solve temporarily the problem ? Is it more complicat... Benoit Laurent
03:56 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Ok, found the problem :
Grass sets wrongly environment variable :
in %OSGEO4W_ROOT%\\apps\\grass\\grass-6.4.3\\etc\...
Hien TRAN-QUANG
03:41 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Yes. Its content is:
@SET PROJ_LIB=%OSGEO4W_ROOT%\\share\\proj@
It seems ok, doesn't it ?
Benoit Laurent
03:37 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Benoit Laurent wrote:
> @os.getenv("PROJ_LIB")
> 'C:\\\\Program Files\\\\QGIS Weekly2\\\\proj'
> @
>
> That may expl...
Jürgen Fischer
03:29 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
In my case, PROJ_LIB does not point to .../share/proj but directly to .../proj which does not exist.
@os.getenv("PRO...
Benoit Laurent
03:16 AM Bug report #7941 (Reopened): IGNF:LAMBE -- not reprojecting
Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"... Jürgen Fischer
03:16 AM Bug report #7941 (Reopened): IGNF:LAMBE -- not reprojecting
Does the @PROJ_LIB@ point to @.../share/proj@? That can be checked by running @import os@ and @os.getenv("PROJ_LIB"... Jürgen Fischer
07:41 AM Bug report #8519 (Closed): "layer stack" option in raster->miscellaneous->merge is badly named
Problem statement:
The "layer stack" option in raster->miscellaneous->merge should probably have a different name.
...
Daniel Araujo Miranda
07:39 AM Bug report #8518 (Closed): OWS tab - Abstract field of service capabilities adds additional new l...
In the OWS Server tab of the project properties one can add an abstract.
If one uses new lines in the input field, Q...
Andreas Neumann
07:28 AM Bug report #7879: Automatic creation of warped VRT is incompatible with pyramid (overview) supports
any update? Rashad Kanavath
04:00 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Bernhard Ströbl wrote:
> _fill spaces_ will be finished today and called _fill gaps_; wait for the next version of th...
Giovanni Manghi
03:38 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
_fill spaces_ will be finished today and called _fill gaps_; wait for the next version of the plugin :-)
_open hole/r...
Bernhard Ströbl
03:27 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries

> [1] http://osgeo-org.1560.x6.nabble.com/more-advanced-editing-tools-td5019552.html
I get a lot of feedback from ...
Giovanni Manghi
03:45 AM Bug report #4761 (Closed): Distance matrix: k becomes k-1 when working with one layer.
Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2". Borys Jurgiel
03:45 AM Bug report #5181 (Closed): fTools python error with option k=1 on 'Distance Matrix'
Fixed in changeset commit:"580b947498c615ab6e740e539ccfa50067baa6c2". Borys Jurgiel
03:28 AM Feature request #4933: Add a "fill hole" (and "fill space") tool in the core digitizing toolbar
Bernhard Ströbl wrote:
> Hi Giovanni,
>
> I just finished work on the _fill ring_ tool in DigitizingTools plugin. Pl...
Giovanni Manghi

2013-08-26

01:50 PM Bug report #7791: QGIS master crash while printing large format (A1, A0) from map composer
Tested print with qgis-dev 1.9.0.3, 64 bit OSGeo4W from Jürgen Fischer
Print Raster A1 at 600dpi is ok.
Confirm solut...
Gerhard Spieles
05:48 AM Bug report #7791 (Closed): QGIS master crash while printing large format (A1, A0) from map composer
This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess...
Giovanni Manghi
05:48 AM Bug report #7791 (Closed): QGIS master crash while printing large format (A1, A0) from map composer
This issue seems really fixed in the new QGIS 64bit
http://trac.osgeo.org/osgeo4w/
please test and reopen if necess...
Giovanni Manghi
05:54 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Bernhard Ströbl wrote:
> That will need C++ skills, won't it? I am afraid I am glad to get my things done in Python :...
Nathan Woodrow
05:49 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Nathan Woodrow wrote:
>
> We should just aim to make them core features, ignore the core plugin idea.
That will nee...
Bernhard Ströbl
05:46 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
I would say create a ticket called something like "Advanced editing tools" and create a new ticket for each edit tool... Nathan Woodrow
05:40 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Giovanni Manghi wrote:
> Nathan Woodrow wrote:
> > Can we reopen this. I think should be a core feature not somethin...
Bernhard Ströbl
04:19 AM Feature request #5342 (Open): Add a tool to allow continue editing of already existing line geome...
Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi...
Giovanni Manghi
04:19 AM Feature request #5342 (Open): Add a tool to allow continue editing of already existing line geome...
Nathan Woodrow wrote:
> Can we reopen this. I think should be a core feature not something we have to get in a plugi...
Giovanni Manghi
04:16 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Can we reopen this. I think should be a core feature not something we have to get in a plugin. Nathan Woodrow
04:13 AM Feature request #5342 (Closed): Add a tool to allow continue editing of already existing line geo...
Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta...
Giovanni Manghi
04:13 AM Feature request #5342 (Closed): Add a tool to allow continue editing of already existing line geo...
Bernhard Ströbl wrote:
> Giovanni,
>
> please check if the prolong line tool in digitizing tools plugin (experimenta...
Giovanni Manghi
05:44 AM Feature request #4933: Add a "fill hole" (and "fill space") tool in the core digitizing toolbar
Hi Giovanni,
I just finished work on the _fill ring_ tool in DigitizingTools plugin. Please update to version 0.2.1
...
Bernhard Ströbl
05:39 AM Bug report #4821 (Closed): Can't print in A0 size, used to work in QGIS 1.6
I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able...
Giovanni Manghi
05:39 AM Bug report #4821 (Closed): Can't print in A0 size, used to work in QGIS 1.6
I have done some extensive test with the new QGIS 64 bit for Windows.
http://trac.osgeo.org/osgeo4w/
and I was able...
Giovanni Manghi
04:07 AM Feature request #8517 (Feedback): Possibility to use field for auto offset (for use in conjunctio...
Giovanni Manghi
04:06 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary.
Giovanni Manghi
04:06 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Yves NEDELEC wrote:
> the problem seems to have been fixed between these versions...
please reopen if necessary.
Giovanni Manghi
04:00 AM Bug report #8487: manual CRS being overwritten by QGIS
For me, the issue is that the proj4 definitions in SRS.db for these South African CRSs are not correct and shouldn't ... Frank Sokolic
03:52 AM Bug report #8487: manual CRS being overwritten by QGIS
Yes, on my system (Ubuntu 13.04, QGIS Master) if I create a custom CRS, e.g:
+proj=tmerc +lat_0=0 +lon_0=31 +k=1 +x_...
Frank Sokolic
03:40 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> What exactly happens?
you create the custom CRS with
+proj=tmerc +lat_0=0 +lon_0=21 +k=...
Giovanni Manghi
02:56 AM Bug report #8487: manual CRS being overwritten by QGIS
It is due to the changes I made in the custom CRS handling. Previously, it was all manual, then I changed it to make ... Leyan Ouyang
02:47 AM Bug report #8487: manual CRS being overwritten by QGIS
Giovanni Manghi wrote:
> it is a custom crs, I tested and qgis does indeed overwrite the crs string.
What exactly ha...
Jürgen Fischer
02:38 AM Bug report #8487: manual CRS being overwritten by QGIS
I've been able to solve this bug on my system (Ubuntu 13.04, QGIS master): If I open /usr/share/qgis/reources/srs.db ... Frank Sokolic
03:43 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
regis Haubourg wrote:
> same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is...
Jürgen Fischer
03:38 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if the problem is upstream I will close this ticket, please reopen if necessary. Giovanni Manghi
03:38 AM Bug report #7941 (Closed): IGNF:LAMBE -- not reprojecting
So if the problem is upstream I will close this ticket, please reopen if necessary. Giovanni Manghi
03:07 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
same bug occurs when trying to export to file and reproject from LAM93 to LAMB2C. So proj4 is the problem. ... Regis Haubourg
02:37 AM Bug report #7941: IGNF:LAMBE -- not reprojecting
Hi, google indicates that the error seems to come from proj4 gdal. Anyone confirms? Regis Haubourg

2013-08-25

12:18 AM Feature request #5342: Add a tool to allow continue editing of already existing line geometries
Giovanni,
please check if the prolong line tool in digitizing tools plugin (experimental) solves this issue.
Bernhard Ströbl
12:13 AM Feature request #8517: Possibility to use field for auto offset (for use in conjunction with size...
Have you tried the latest dev versions because I'm pretty sure you can already do this.
!http://i.imgur.com/V1kDFdc....
Nathan Woodrow
12:10 AM Feature request #8517: Possibility to use field for auto offset (for use in conjunction with size...
An example of a traffic volume map in Inro Emme: !http://www.inrosoftware.com/images/emme4/standard_toolbox/bridge_tr... Jonas Malaco Filho
12:09 AM Feature request #8517 (Feedback): Possibility to use field for auto offset (for use in conjunctio...
Especially when trying to view data on roads (such as vehicle counts per hour per segment), it's already very helpful... Jonas Malaco Filho
11:29 PM Bug report #8507: QGIS trunk failed to compile with sip 4.15
I pulled the latest GIT but still got error.... Xavier Fung
04:27 PM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
I'll try again at my office but I installed tonight at home the version 1.9.0 weekly (n°33 I think it was).
With the ...
Yves NEDELEC
10:49 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
... as soon as possible, I just can't do it right now.
Thanks again.
Yves
Yves NEDELEC
10:47 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
Thank you for you quick answer...I'll write a full list of steps.
Yves
Yves NEDELEC
10:45 AM Bug report #8516: Postgis layer - Feature edit form is empty when feature is pasted from another ...
I send another view with a right editor window on a created point Yves NEDELEC
10:43 AM Bug report #8516 (Feedback): Postgis layer - Feature edit form is empty when feature is pasted fr...
Hi,
*) have you tested qgis master?
*) as the description is not very clear, can you supply a list of detailed step...
Giovanni Manghi
10:38 AM Bug report #8516 (Closed): Postgis layer - Feature edit form is empty when feature is pasted from...
Hi,
My QGis version is 1.8.0
I can populate the_geom field of geometryless records (created by a web application -a w...
Yves NEDELEC
05:58 AM Bug report #7441: Measurements in degrees even when meters are chosen as map units
From the explanations above, there seem to be valid reasons to turn off OTF, but it should only be disabled for speci... Matthias Kuhn
02:39 AM Bug report #8514 (Closed): SEXTANTE plugins stopped working
Following the rename of the plugin, its subplugins stopped working, e.g.:... Paolo Cavallini

2013-08-24

01:18 PM Bug report #8440 (Closed): Encoding problems that occur when a shapefile layer is saved as a new ...
Fixed in changeset commit:"b05abdf81d6a552570f3ecb69fac12698b279b75". Marco Hugentobler
03:29 AM Bug report #8512 (Closed): when using the batch mode cannot look for "any type" of input files
*New description:*
The *.* wildcard it is not available, the user can only look for files of 1 certain type (and ext...
Giovanni Manghi
03:21 AM Bug report #8511 (Closed): Iterations: autofill mode fills the output name in a wrong way under L...
when using the batch mode the autofill mode "with parameters values" seems that does not work as expected but just un... Giovanni Manghi

2013-08-23

05:02 PM Bug report #8482 (Closed): Public keys expired for Ubuntu repositories
Jürgen Fischer
02:52 PM Bug report #8438: WMT-S Crashes when loading layer
ok, I hadn't read your note-2 above, so crash confirmed here! Salvatore Larosa
02:43 PM Bug report #8438: WMT-S Crashes when loading layer
Try ensuring that your map canvas size is at least 850x750 Jeremy Palmer
01:58 PM Bug report #8438: WMT-S Crashes when loading layer
I don't see any crash here (debian with latest master), should I follow any particular procedure to get the crash or ... Salvatore Larosa
01:39 PM Bug report #8438: WMT-S Crashes when loading layer
ANy chance to get this looked at before 2.0 is released. Would be a pity that QGIS is released with WMT-S that crashes. Jeremy Palmer
12:44 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec...
Giovanni Manghi
12:44 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
Salvatore Larosa wrote:
> with 200 tables I don't see this issue, do you think we can close the issue or at least dec...
Giovanni Manghi
12:42 PM Bug report #5811: dbmanager freezes when the schema has a lot of tables
with 200 tables I don't see this issue, do you think we can close the issue or at least decrease the priority? Salvatore Larosa
11:05 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
fixed in commit:c9cf74526 Jürgen Fischer
11:05 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
fixed in commit:c9cf74526 Jürgen Fischer
08:45 AM Bug report #8489: Removing a DB table from DB manager does not work
It should be fixed on master. Paolo Cavallini
10:40 AM Bug report #6299: Sextante output do not have the same Encoding as the inputs
Although QGIS works properly with and without "Ignore Shapefile encoding" now, please remember there is one unresolva... Borys Jurgiel
05:40 AM Bug report #5181: fTools python error with option k=1 on 'Distance Matrix'
below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769
vinayan Parameswaran
05:39 AM Bug report #4761: Distance matrix: k becomes k-1 when working with one layer.
below pull request should fix it..
https://github.com/qgis/Quantum-GIS/pull/769
vinayan Parameswaran
04:44 AM Bug report #8506 (Closed): In the Label Section- option Type case - Capitalize first letter don't...
Ok,
more probably is a question of my windows.
Also I found an easy workaround defining on my dbms a view with case...
aperi2007 -
02:57 AM Bug report #8506 (Feedback): In the Label Section- option Type case - Capitalize first letter don...
just tested on qgis master and cannot confirm this issue. Giovanni Manghi
02:57 AM Bug report #8506 (Feedback): In the Label Section- option Type case - Capitalize first letter don...
just tested on qgis master and cannot confirm this issue. Giovanni Manghi
02:38 AM Bug report #8503 (Feedback): Postgis query test returns all rows, not query result
seems really duplicate of #7780 please close this. Giovanni Manghi
02:32 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in...
Giovanni Manghi
02:32 AM Bug report #8487: manual CRS being overwritten by QGIS
Jürgen Fischer wrote:
> Is that a custom crs or did you modify srs.db?
it is a custom crs, I tested and qgis does in...
Giovanni Manghi
02:29 AM Bug report #8504 (Closed): Attribute table: QGIS crashes when field is removed (only in dual view)
Fixed in changeset commit:"6f574b41aedd9f7d00a9854bdbbd9b5209ef4e40". Matthias Kuhn
02:25 AM Feature request #8508 (Closed): QGIS Server: make nr of layers in layer cache configurable
Reminder of discussion with Marco H.
It would be good if, for larger QGIS server installations, the nr of layers to ...
Andreas Neumann

2013-08-22

01:15 AM Bug report #6892 (Closed): setDirty error when displaying DB Manager previews
Fixed in changeset commit:"d100628da299ded9edcba4dcd52051deef8fcbcb". Giuseppe Sucameli
07:05 PM Bug report #8507 (Closed): QGIS trunk failed to compile with sip 4.15
Upgraded to sip 4.15 from Arch and trunk cannot be compiled with this error message.... Xavier Fung
04:38 PM Bug report #8506 (Closed): In the Label Section- option Type case - Capitalize first letter don't...
as repeorted.
In the label properties, when choose to set the "Type case" ,
the option "Capitalize first letters" do...
aperi2007 -
04:15 PM Feature request #8505 (Feedback): Add option to suppress feature form for new features to project...
Currently, this is an app-wide option, but should be pretty straightforward to implement for project and layer proper... Larry Shaffer
01:47 PM Bug report #8504 (Closed): Attribute table: QGIS crashes when field is removed (only in dual view)
With the attribute table in dual view if I remove some field and
commit the changes (save button or toggle editing a...
Salvatore Larosa
12:22 PM Bug report #8487: manual CRS being overwritten by QGIS
Is that a custom crs or did you modify srs.db? Jürgen Fischer
11:55 AM Bug report #8379 (Closed): Symbology: Get rid of duplicate functionality "line decoration"
Fixed in changeset commit:"aaef9478004e27d3b77c356deca0091bcb86b249". Jürgen Fischer
11:51 AM Bug report #8503: Postgis query test returns all rows, not query result
John Tull wrote:
> Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, n...
Jürgen Fischer
10:44 AM Bug report #8503: Postgis query test returns all rows, not query result
Yes, and turning that off in the connection settings "fixes" the query count issue. As I recall, not using the estima... John Tull
10:02 AM Bug report #8503: Postgis query test returns all rows, not query result
Are you using the "estimated metadata" option? Jürgen Fischer
09:52 AM Bug report #8503 (Closed): Postgis query test returns all rows, not query result
For layers added from a postgis database, the query builder does not return the number of rows that a query expressio... John Tull
09:01 AM Bug report #8473 (Closed): Cannot rename layers in composer legend
The changes are fine and the patch is applied in master branch. Thanks rldhont for fixing this issue! Marco Hugentobler
06:18 AM Bug report #8473: Cannot rename layers in composer legend
Ok, in that case the ticket is assigned to me. Marco Hugentobler
06:15 AM Bug report #8473: Cannot rename layers in composer legend
I am offline until September 3, please ask someone else to apply the patch. Radim Blazek
02:29 AM Bug report #8473: Cannot rename layers in composer legend
Hi Radim,
I assigne this issue to you for reviewing my patch.
Marco wrote that you did a lot of work on composer leg...
René-Luc ReLuc
03:05 AM Feature request #8500 (Open): Add the ability to get the original GetfeatureInfo and GetLegendGra...
I've originally posted this issue here #8491
When you add a WMS layer in a QGIS project to use it in QGIS server, yo...
Nicolas Boisteault
03:02 AM Bug report #8493: "Save as Image" defaults to archaic media type
+1 this bothered me since years. Not a big deal - only annoying. BMP is really the worst choice. Andreas Neumann
03:01 AM Bug report #8499 (Closed): OWS tab - adding CRS restrictions not reliable
In Project Properties, OWS tab: when adding CRS to the CRS restrictions sometimes I only get empty entries. Try to ad... Andreas Neumann
02:44 AM Bug report #8497 (Closed): python console can't open anymore if special character has been writte...
yes, you're right, everything's ok.!!!
thanks!
Denis Rouzaud
02:31 AM Bug report #8497: python console can't open anymore if special character has been written in prev...
Hi Denis,
it looks like you have an old code in your fork, that encoding problem has already been fixed recently
ple...
Salvatore Larosa

2013-08-21

01:56 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
Hi Wiliam, thanks for updating the archive page.
I have a suggestion to change your http://www.kyngchaos.com/software...
Rik De Vreese
07:45 PM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
done. William Kyngesburye
07:45 PM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
done. William Kyngesburye
03:26 PM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
I did update the archive recently, but it looks like my host lost those changes when they moved my site to new hardwa... William Kyngesburye
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
02:58 PM Bug report #8492 (Feedback): OSX - GRASS tools not longer available in Plugin menu
Hi Rik,
Yes, I do not find it on "the downloads archive page":http://www.kyngchaos.com/software/archive either.
I h...
Larry Shaffer
05:15 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
Unfortunately GRASS 6.4.2 isn't longer available for Mac on Kyngchaos.com. Rik De Vreese
05:01 AM Bug report #8492: OSX - GRASS tools not longer available in Plugin menu
QGIS 1.8 requires GRASS 6.4.2. If you want to use GRASS 6.4.3 then you will need the QGIS 2.0 nightly build from http... rcline -
11:57 PM Bug report #8497 (Closed): python console can't open anymore if special character has been writte...
If you have an accent (é in my case) present in console_history.txt, the console can't be open and an error occurs at... Denis Rouzaud
08:57 PM Feature request #8495 (Closed): lat-long graticule on projected map
It's great having the grids available in the Composer and now in View decorations, but it's still not possible to gen... Gavin Fleming
03:40 PM Feature request #8494 (Open): Georeferencer and rectifier
*When georeferencing*: Now you see the rasterimage in a separate window but I think it would be better if the rasteri... Goran Wertwein
08:45 AM Bug report #8482: Public keys expired for Ubuntu repositories
Mathew Topper wrote:
> I have the same problem with the debian wheezy Release repository.
>
> I've imported the new ...
Jürgen Fischer
08:39 AM Bug report #8482: Public keys expired for Ubuntu repositories
I have the same problem with the debian wheezy Release repository.
I've imported the new key, but for some reason th...
Mathew Topper
07:15 AM Bug report #8493 (Closed): "Save as Image" defaults to archaic media type
If I do *File* > *Save as Image*, the default is BMP, an archaic media type that generally should only be used when m... Aren Cambre
02:32 AM Bug report #8489: Removing a DB table from DB manager does not work
Jürgen Fischer wrote:
> Jürgen Fischer wrote:
> > Talk is cheap. Fix your translation ;)
>
> @Really delete table/v...
Giovanni Manghi

2013-08-20

01:40 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
off road and wrong conclusion, sorry! Salvatore Larosa
12:26 PM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
I think of having (almost) track out the issue. :-)
I noticed that applying the following patch fix the problem:
<p...
Salvatore Larosa
02:24 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
I forgot to say....
For me the message is simply "Attribute Error: The attribute could not be added to the layer".
Salvatore Larosa
02:17 AM Bug report #8480: "The attribute could not be inserted. The name already exists in the table." wh...
it looks like if precision (mPrec) is not set properly when not visible and reverting the commit:69c656e solves the i... Salvatore Larosa
01:32 AM Bug report #8490: Index shift in check geometry validity tool
The problem was identified using mapinfo file. It doesn't show up with ESRI shapefile. Olivier Monod
12:54 AM Bug report #8490 (Closed): Index shift in check geometry validity tool
Small issue with the "check geometry validity" tool in QGIS in menu "Vector=> Geometry Tools".
The tool identify geo...
Olivier Monod
01:31 AM Bug report #8492 (Closed): OSX - GRASS tools not longer available in Plugin menu
System: OSX 10.6.8, QGIS 1.8.0 (with GDAL1.9), GRASS 4.6.3 (with GDAL 1.10).
(Upgraded through clean install from QGI...
Rik De Vreese
01:23 AM Bug report #8489: Removing a DB table from DB manager does not work
Jürgen Fischer wrote:
> Talk is cheap. Fix your translation ;)
@Really delete table/view %s?@ is translated as @Eli...
Jürgen Fischer
08:55 AM Bug report #8489: Removing a DB table from DB manager does not work
Paolo Cavallini wrote:
> Seem a trivial issue to fix.
Talk is cheap. Fix your translation ;)
Jürgen Fischer
08:49 AM Bug report #8489: Removing a DB table from DB manager does not work
Confirmed on Debian, with a different server Paolo Cavallini
07:59 AM Bug report #8489 (Feedback): Removing a DB table from DB manager does not work
not confirmed here too. Giovanni Manghi
07:50 AM Bug report #8489: Removing a DB table from DB manager does not work
Not confirmed here on linux, I can delete tables without any issue! Salvatore Larosa
07:20 AM Bug report #8489 (Closed): Removing a DB table from DB manager does not work
Seem a trivial issue to fix.... Paolo Cavallini
09:49 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
Marco Hugentobler wrote:
> The small gaps appear because of numerical problems, see geos-devel list (http://lists.osg...
Giovanni Manghi
09:47 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
Salvatore Larosa wrote:
> better solution, but the fix seems incomplete :-)
Why? QgsMimeDataUtils does the colon es...
Jürgen Fischer
09:09 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
better solution, but the fix seems incomplete :-) Salvatore Larosa
08:33 AM Bug report #8488 (Closed): "Unable to load the layer <built-in method name of QgsVectorLayer obje...
Fixed in changeset commit:"b9b8a03905e0a0482e05bec99d4f021b1f54644c". Jürgen Fischer
07:33 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
I don't know if we can fix this directly from browser code, but it look like if on Windows the shp path is wrong:
@C...
Salvatore Larosa
03:31 AM Bug report #8488: "Unable to load the layer <built-in method name of QgsVectorLayer object at 0x0...
See also http://lists.osgeo.org/pipermail/qgis-developer/2013-August/027876.html Jürgen Fischer
03:28 AM Bug report #8488 (Closed): "Unable to load the layer <built-in method name of QgsVectorLayer obje...
On Windows, not on Linux (apparently). Giovanni Manghi
05:22 AM Bug report #8473: Cannot rename layers in composer legend
I have completed my patch and I proposed it through this pull request
https://github.com/qgis/Quantum-GIS/pull/824
René-Luc ReLuc
 

Also available in: Atom