QGIS » QGIS Application

2018-05-06

11:46 PM Bug report #18919: QGIS 3.0.1 crashes when opening project last saved in QGIS 2.18.11-1

Error on form: Crashes QGIS David Lane

11:43 PM Bug report #18919 (Closed): QGIS 3.0.1 crashes when opening project last saved in QGIS 2.18.11-1

h2. User Feedback
h2. Report Details
*Crash ID*: 6c2deabe7e75f17c31a694cf41ea09265f52f937
*Stack Trace... David Lane

10:26 PM Bug report #18918 (Open): Improve CMake error messages when libraries are missing.

Hello,
I am just building QGIS from scratch and noticed that while some libraries are included in the cmake files ... Tobias Watzl

09:32 PM Bug report #18917 (Open): QGIS 3 "Meters at Scale" incorrect behavior

I tried using "Meters at Scale" to set the sizes of symbols in layer styles. I don't find "Meters at Scale" documente... Mark Newbold

09:31 PM Bug report #18916 (Feedback): QGIS crashes with no geometry tables

That was fixed recently - what build are you using? Nyall Dawson

12:37 PM Bug report #18916: QGIS crashes with no geometry tables

The only error I get is `QGIS died on signal 11Aborted` (from terminal) matteo ghetta

12:32 PM Bug report #18916 (Closed): QGIS crashes with no geometry tables

It seems that it doesn't matter if the table is saved as `dbf` or in a geopackage file. When trying to open the table... matteo ghetta

07:06 PM Feature request #11323: Allow editing gdal commands in processing

Nyall Dawson wrote:
> I'd be inclined to close this as a "won't-fix". The command line is shown only as a shortcut f... Nicolas Cadieux

09:36 AM Feature request #11323: Allow editing gdal commands in processing

I understand well your point. Same thing applies to other backends (grass, saga).
However, good old GDALTools made t... Paolo Cavallini

03:27 AM Feature request #11323 (Feedback): Allow editing gdal commands in processing

Nyall Dawson

03:27 AM Feature request #11323: Allow editing gdal commands in processing

I'd be inclined to close this as a "won't-fix". The command line is shown only as a shortcut for people developing ba... Nyall Dawson

07:04 PM Bug report #18597: Layer reprojection from EPSG:3844 to EPSG:4326 has offset since QGIS 2.18.8

Someone sent me a set of parameters:
towgs84=2.3283,-147.0416,-92.0802,-0.30924979,0.32482188,0.49730012,5.68907711
... L Sz

04:49 PM Bug report #18896: "Hide deprecated CRSs" functionality not working properly in the Coordinate Re...

Hope this will back ported to 2.18. Andrea Giudiceandrea

03:09 PM Bug report #18680: [Processing]"Contains" and "Does not contain" operators do no work with not st...

Please read again my message; i'm aware of that and as i wrote, if the predicates do not match the type of field, the... Harrissou Santanna

01:02 PM Bug report #18680 (Rejected): [Processing]"Contains" and "Does not contain" operators do no work ...

Please read how "contains" and "does not contain" operators work. They can not be applied to numeric data. Alexander Bruy

01:02 PM Bug report #18680 (Rejected): [Processing]"Contains" and "Does not contain" operators do no work ...

Please read how "contains" and "does not contain" operators work. They can not be applied to numeric data. Alexander Bruy

02:15 PM Bug report #18905: Deprecated CRSs: inconsistencies in srs.db and in its update process

See also (about the last sentence of the bug report):
[gdal-dev] About deprecated CRS and the different behavior of ... Andrea Giudiceandrea

01:03 PM Bug report #18730 (Feedback): GRASS Batch Processing - v.distance

Please provide more information and test data Alexander Bruy

01:03 PM Bug report #18730 (Feedback): GRASS Batch Processing - v.distance

Please provide more information and test data Alexander Bruy

01:00 PM Bug report #18658 (Closed): PyQGIS Developer Cookbook and the modules

Please file documenation related issues in the corresponding bugtracker https://github.com/qgis/QGIS-Documentation/is... Alexander Bruy

01:00 PM Bug report #18658 (Closed): PyQGIS Developer Cookbook and the modules

Please file documenation related issues in the corresponding bugtracker https://github.com/qgis/QGIS-Documentation/is... Alexander Bruy

01:00 PM Bug report #18658 (Closed): PyQGIS Developer Cookbook and the modules

Please file documenation related issues in the corresponding bugtracker https://github.com/qgis/QGIS-Documentation/is... Alexander Bruy

01:00 PM Bug report #18658 (Closed): PyQGIS Developer Cookbook and the modules

Please file documenation related issues in the corresponding bugtracker https://github.com/qgis/QGIS-Documentation/is... Alexander Bruy

12:57 PM Bug report #18657 (Rejected): error after used SCP plugin

Please contact author or the SCP plugin about this issue. Alexander Bruy

12:57 PM Bug report #18657 (Rejected): error after used SCP plugin

Please contact author or the SCP plugin about this issue. Alexander Bruy

12:57 PM Bug report #18657 (Rejected): error after used SCP plugin

Please contact author or the SCP plugin about this issue. Alexander Bruy

12:57 PM Bug report #18657 (Rejected): error after used SCP plugin

Please contact author or the SCP plugin about this issue. Alexander Bruy

12:45 PM Bug report #18876 (Closed): Bad/malformed command string when launching TauDem script (2.18.17)

Alexander Bruy

12:43 PM Bug report #11656 (Closed): Inconsistent icons

Seems addressed in 3.0 Alexander Bruy

12:43 PM Bug report #11656 (Closed): Inconsistent icons

Seems addressed in 3.0 Alexander Bruy

12:43 PM Bug report #11656 (Closed): Inconsistent icons

Seems addressed in 3.0 Alexander Bruy

12:42 PM Bug report #4762 (Closed): Inconsistent behavior of legend groups

Works as expected in 3.0 Alexander Bruy

12:42 PM Bug report #4762 (Closed): Inconsistent behavior of legend groups

Works as expected in 3.0 Alexander Bruy

12:42 PM Feature request #14547 (Closed): Legend group checkbox should honour visibility of layers in the ...

Works as expected in 3.0 Alexander Bruy

12:41 PM Feature request #14641 (Closed): Allow to select layers and files in ParameterMultipleInput

Fixed in 3.0 Alexander Bruy

12:41 PM Feature request #14641 (Closed): Allow to select layers and files in ParameterMultipleInput

Fixed in 3.0 Alexander Bruy

12:41 PM Bug report #18734: Matrix parameter can not be used in the Graphical Modeler

Pull-request https://github.com/qgis/QGIS/pull/6936 Alexander Bruy

12:40 PM Bug report #18913 (Closed): Union tool gives completly unpredictive results

Fixed in 3.2 Alexander Bruy

12:40 PM Bug report #18913 (Closed): Union tool gives completly unpredictive results

Fixed in 3.2 Alexander Bruy

11:14 AM Bug report #18913: Union tool gives completly unpredictive results

Thank you Nyall for pointing this, the new union tool now works correctly, in this example I get the same result as S... Dominique Lyszczarz

11:19 AM Bug report #18748 (Closed): gdal rasterize error

Applied in changeset commit:qgis|bddcb7dc42285c97a360cce3b505efca2339f1eb. Nyall Dawson

11:19 AM Bug report #18748 (Closed): gdal rasterize error

Applied in changeset commit:qgis|bddcb7dc42285c97a360cce3b505efca2339f1eb. Nyall Dawson

08:44 AM Bug report #18914: [macOS] Plugin list corrupted by wrongly placed checkboxes on Mac

Looks like all the checkboxes overlap in one place. I believe it affects all the plugin tabs on the left (not just in... Borys Jurgiel

08:38 AM Bug report #18877: Maximum recursion depth exceeded after adding a model or script to the Process...

It looks very similar to #18807, but that bug was introduced *after 2.18.18*. Hopefully that fix helped here as well.... Borys Jurgiel

07:53 AM Bug report #12479: gdal 2.0.0

Are you sure this has been corrected?
fdef.GetGeomFieldCount() will return the amount, thus a loop should exist fr... Mark Johnson

03:23 AM Bug report #12479 (Closed): gdal 2.0.0

Fixed in QGIS 3 Nyall Dawson

03:23 AM Bug report #12479 (Closed): gdal 2.0.0

Fixed in QGIS 3 Nyall Dawson

03:24 AM Feature request #18911 (Closed): Incomplet GUI dialogue box for GDAL processing tools (like Build...

Duplicate of #11323 Nyall Dawson

03:24 AM Feature request #18911 (Closed): Incomplet GUI dialogue box for GDAL processing tools (like Build...

Duplicate of #11323 Nyall Dawson

03:21 AM Feature request #18911: Incomplet GUI dialogue box for GDAL processing tools (like Build Virtual ...

Help button was fixed by commit:b3288192ee2cd216b936dda98fc6600f27993d39 Nyall Dawson

03:20 AM Bug report #18065 (Closed): Processing Modeler UI input widgets do not resize

Duplicate of #16428 Nyall Dawson

03:20 AM Bug report #18065 (Closed): Processing Modeler UI input widgets do not resize

Duplicate of #16428 Nyall Dawson

2018-05-05

11:15 PM Bug report #18915 (Closed): pyQGIS - new_point.transform(tr) Exception: unknown

I believe that this worked in 3.0.0 and 3.0.1 (once I converted the API calls to 3.0)
Call to transform dies with ... Russell Fulton

11:13 PM Bug report #18896 (Closed): "Hide deprecated CRSs" functionality not working properly in the Coor...

Applied in changeset commit:qgis|a022ad21d4ff5ede1800c8605b8bcae730c80da4. Nyall Dawson

11:13 PM Bug report #18896 (Closed): "Hide deprecated CRSs" functionality not working properly in the Coor...

Applied in changeset commit:qgis|a022ad21d4ff5ede1800c8605b8bcae730c80da4. Nyall Dawson

11:03 PM Bug report #18914 (Closed): [macOS] Plugin list corrupted by wrongly placed checkboxes on Mac

Working on a Mac (if it matters)
I am developing a new plugin for qgis 3 on a Mac using plugin builder following i... Russell Fulton

09:54 PM Bug report #18913 (Feedback): Union tool gives completly unpredictive results

Please check with a nightly release - the union tool has been rewritten from scratch for 3.2 Nyall Dawson

12:34 PM Bug report #18913 (Closed): Union tool gives completly unpredictive results

I've attached 2 shapefiles that illustrate the issue. The result of the union gives 79 features and lot of them are o... Dominique Lyszczarz

05:51 PM Bug report #18874: QGIS 3D map viewer crashes on WCS/WMTS layers in 3.0.2

Update 05-May-2018: if I deselect the rendering of the WCS elevation layer, the 3-D view does not crash. JW van Aalst

04:23 AM Bug report #18900 (Closed): [Oracle] Mixing SDO_GEOMETRY Point definition

Applied in changeset commit:qgis|849278a2d6701ac94f05ce5dcafc11223dc2980d. René-Luc ReLuc

04:23 AM Bug report #18900 (Closed): [Oracle] Mixing SDO_GEOMETRY Point definition

Applied in changeset commit:qgis|849278a2d6701ac94f05ce5dcafc11223dc2980d. René-Luc ReLuc

04:05 AM Bug report #13435 (Closed): Default diagram placement

Applied in changeset commit:qgis|bf22b88ad93d16369f4f56ca646fabdd9be69497. Harrissou Santanna

04:05 AM Bug report #13435 (Closed): Default diagram placement

Applied in changeset commit:qgis|bf22b88ad93d16369f4f56ca646fabdd9be69497. Harrissou Santanna

2018-05-04

01:57 AM Bug report #18807 (Closed): Enabling/disabling algorithm providers as well as creating/removing p...

Applied in changeset commit:qgis|d8e39fa9940f82ad54c7fcbf9c54fe53405f3ff6. Jürgen Fischer

01:57 AM Bug report #18807 (Closed): Enabling/disabling algorithm providers as well as creating/removing p...

Applied in changeset commit:qgis|d8e39fa9940f82ad54c7fcbf9c54fe53405f3ff6. Jürgen Fischer

08:49 PM Bug report #18807: Enabling/disabling algorithm providers as well as creating/removing preconfigu...

The same after enabling or disabling algorithm providers in the Processing options dialog. Borys Jurgiel

11:37 PM Feature request #18912 (Open): Georeferencer run in the background

It would be great if the Georeferencer could work in the background without blocking the whole QGis interface.
The t... Antoine Lafranchis

07:20 PM Bug report #17523 (Reopened): Raster calculator cannot handle huge raster files

Hi,
I see the problem is still present in Qgis3... Any plans on fixing this issue?
Nicolas Nicolas Cadieux

07:16 PM Feature request #18911 (Closed): Incomplet GUI dialogue box for GDAL processing tools (like Build...

In QGis 3, it is no longer possible to modify the GDAL/OGR console call or to see the list and order of files being u... Nicolas Cadieux

05:48 PM Bug report #18557: Layout Setup of Page not working

Same problem when running QGIS 3.0.2 under Mac OS X 10.12.6.
Using Ctrl-click (right-click) on page seems to be only... Garth Fletcher

04:52 PM Bug report #18910 (Open): Geopackage converts 8 bit raster in 4 band rgb

8 bit (256 greyscale) rasters are converted in 4 bands rgb images during the importing in an existing geopackage. Thi... matteo ghetta

02:31 PM Bug report #18909 (Closed): QGIS crashed

h2. User Feedback
QGIS 3.0 crashed when I adjusted some layer properties (symbology)
I just followed the hint at... Christoph Aberle

02:15 PM Bug report #18908 (Closed): SAGA algorithms not usable in Processing Modeler

All the SAGA algorithms seems not usable in Processing Modeler. The same algorithms with the same data runs fine outs... matteo ghetta

12:41 PM Bug report #18900: [Oracle] Mixing SDO_GEOMETRY Point definition

The PR https://github.com/qgis/QGIS/pull/6923 provides a fix that needs to be tested.
The fix comes from MapServer... René-Luc ReLuc

10:22 AM Bug report #18907: QGIS 3 crashed after duplicating a layout

Hi,
I'm not sure a crash should be of a low priority. Harrissou Santanna

10:22 AM Bug report #18907: QGIS 3 crashed after duplicating a layout

Hi,
I'm not sure a crash should be of a low priority. Harrissou Santanna

10:22 AM Bug report #18907: QGIS 3 crashed after duplicating a layout

Hi,
I'm not sure a crash should be of a low priority. Harrissou Santanna

08:46 AM Bug report #18064: QGIS3 QtSqlDatabase 'QSPATIALITE' driver crash

I've done with same workaround as you thinking - works for now.... Jakub Kosik

07:59 AM Bug report #18894: Qgis crashes on deleting auxiliary storage

demo project
Johannes Metzler

07:59 AM Bug report #18894: Qgis crashes on deleting auxiliary storage

demo project
Johannes Metzler

2018-05-03

11:48 PM Bug report #18907 (Closed): QGIS 3 crashed after duplicating a layout

QGIS 3 crashed after duplicating a layout
h2. User Feedback
I duplikatet a layout.
h2. Report Details
*Cr... Torsten Hase

08:44 PM Bug report #18628 (Closed): QGIS 3: vertex editor highlights features in non-visible layers

Should be fixed by https://github.com/qgis/QGIS/pull/6657
Please reopen if necessary Regis Haubourg

08:44 PM Bug report #18628 (Closed): QGIS 3: vertex editor highlights features in non-visible layers

Should be fixed by https://github.com/qgis/QGIS/pull/6657
Please reopen if necessary Regis Haubourg

07:52 PM Bug report #18064: QGIS3 QtSqlDatabase 'QSPATIALITE' driver crash

Hello, I have the very same problem porting my plugin.
Maybe the following helps somehow (not sure if is it approp... Johannes Liem

06:30 PM Bug report #18906 (Closed): GDAL Geo-referencer no longer opens

I cannot re-create this issue.
At some point when modifying settings in the 'default' user profile I was not longe... Matthew Bodnar

05:39 PM Bug report #18905 (Closed): Deprecated CRSs: inconsistencies in srs.db and in its update process

Trying to investigate the bug #18896, I've found some *inconsistencies in srs.db* (in both QGIS *3.0.2* and *2.18.19*... Andrea Giudiceandrea

05:36 PM Bug report #18904 (Open): [Layer properties] Weird resizing of widgets in Attribute forms tab

When resizing the layer properties dialog or when its size is small and you switch to drag-and-drop designer mode in ... Harrissou Santanna

02:56 PM Bug report #18903 (Closed): QGIS Crashed

h2. User Feedback
h2. Report Details
*Crash ID*: f0d81525c9390201866659f81ae44f7d47a4fa3a
*Stack Trace... Abbie Reynolds-Beer

01:41 PM Bug report #18902 (Closed): Snapping and tracing inconsistent behaviour

According to this PR:
https://github.com/qgis/QGIS/pull/6750
Snapping is disabled on hidden features. But when tr... Saber Razmjooei

12:53 PM Bug report #17957 (Closed): [DB Manager] Gui texts not available to translation

Applied in changeset commit:qgis|e2da696ab633fd066245828b7e884886cd5da83b. Harrissou Santanna

12:53 PM Bug report #17957 (Closed): [DB Manager] Gui texts not available to translation

Applied in changeset commit:qgis|e2da696ab633fd066245828b7e884886cd5da83b. Harrissou Santanna

12:32 PM Bug report #18901 (Open): Scale dependent visibility and snapping

According to this fix:
https://github.com/qgis/QGIS/pull/6750
Features "not visible" should not be available for ... Saber Razmjooei

12:28 PM Bug report #18900 (Closed): [Oracle] Mixing SDO_GEOMETRY Point definition

If a layer has mixed *SDO_GEOMETRY* Point definition, *SDO_POINT_TYPE* or *SDO_ELEM_INFO_ARRAY* and *SDO_ORDINATE_ARR... René-Luc ReLuc

12:10 PM Bug report #18801 (Closed): QGIS project containing mesh layer fails to open the ML

Applied in changeset commit:qgis|12183e98db47aa788cf53b34ca7069afbd93b83a. Peter Petrik

12:10 PM Bug report #18801 (Closed): QGIS project containing mesh layer fails to open the ML

Applied in changeset commit:qgis|12183e98db47aa788cf53b34ca7069afbd93b83a. Peter Petrik

11:14 AM Bug report #18794: QGIS 3.0.2 crash on startup

Are there any virus scanners active?
Sometimes, Anti-Virus software is screwing up other software.
Also, some p... Andreas Neumann

11:10 AM Bug report #18794: QGIS 3.0.2 crash on startup

Hi,
We run QGIS 3.0.2 (OSGeo4W64) or standalone just fine on Windows 7, Service Pack 1.
Andreas Andreas Neumann

10:55 AM Bug report #18794: QGIS 3.0.2 crash on startup

I have QGIS 3.0.2 (OSGeo4W64) running on a Windows 7 machine without a problem. Michel Stuyts

10:35 AM Bug report #18794: QGIS 3.0.2 crash on startup

Mmm, I do not have Windows 7 machine anymore...
Are you able to try on another Win7 machine?
Or a clean one?
... Richard Duivenvoorde

08:47 AM Bug report #18679 (Open): Cannot insert decimal separator to field

David Pavlicek

08:14 AM Bug report #18679: Cannot insert decimal separator to field

Hi again,
i suppose that this issue is specific for Wondows OS and locale with comma as decimal separator. I was abl... David Pavlicek

06:39 AM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....

> > Giovanni Manghi wrote:
> I understand and agree. QGIS Server 2.18 should work on Windows as it did the previous ... Uroš Preložnik

04:22 AM Bug report #18899 (Closed): Sorting an attribute table with Actions enabled hides the values in t...

If I enable an Action to 'Show in Attribute Table', Open the Attribute Table and then sort by any column in the table... Alex Mackenzie

04:10 AM Bug report #18896 (In Progress): "Hide deprecated CRSs" functionality not working properly in the...

PR https://github.com/qgis/QGIS/pull/6921 Nyall Dawson

04:10 AM Bug report #18896 (In Progress): "Hide deprecated CRSs" functionality not working properly in the...

PR https://github.com/qgis/QGIS/pull/6921 Nyall Dawson

04:05 AM Bug report #18895 (Closed): Translate (convert format) ignores nodata value of zero

Nyall Dawson

02:47 AM Bug report #18895 (In Progress): Translate (convert format) ignores nodata value of zero

PR: https://github.com/qgis/QGIS/pull/6920 Nyall Dawson

03:19 AM Bug report #18894: Qgis crashes on deleting auxiliary storage

Same issue here, Mac 10.13.3. Nathan Perry

02:21 AM Bug report #18781 (Closed): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Ah - these are multipolyline geometries in 3.0, not polylines.
So your code needs to be:
for lineaMT in line... Nyall Dawson

02:12 AM Bug report #18898 (Closed): Problem using processing dissolve from pyqgis

This was fixed by commit:78484c10a0e9609b5300d3cb7929e7acd71c3d6c.
Until 3.0.3 the solution is to modify your pro... Nyall Dawson

02:12 AM Bug report #18898 (Closed): Problem using processing dissolve from pyqgis

This was fixed by commit:78484c10a0e9609b5300d3cb7929e7acd71c3d6c.
Until 3.0.3 the solution is to modify your pro... Nyall Dawson

2018-05-02

12:50 AM Bug report #18898 (Closed): Problem using processing dissolve from pyqgis

Hi,
I'm trying to dissolve district polygons to state level using pyqgis. The code worked well in a previous versi... José Miguel Pascual

11:36 PM Bug report #18897 (Closed): can't see layers on canvas loaded from XYZ Tiles in QGIS 3 on Mac

I am trying to load background map from OSM and having problems. The data source browser->XYZ Tile comes 'pre loaded'... Russell Fulton

09:48 PM Bug report #18885 (Closed): Processing native Clip algorithm does not copy the attribute table

Applied in changeset commit:qgis|9809f9394b3b0e1d8392add4cc2a7c380dd33eca. Nyall Dawson

09:48 PM Bug report #18885 (Closed): Processing native Clip algorithm does not copy the attribute table

Applied in changeset commit:qgis|9809f9394b3b0e1d8392add4cc2a7c380dd33eca. Nyall Dawson

08:21 PM Bug report #18794: QGIS 3.0.2 crash on startup

Thanks for following up.
- I'm using 64 bit Windows 7 Professional Service Pack 1.
- I use the stand alone instal... Ben Neely

06:46 PM Bug report #17980 (Reopened): "resources/data/world_map.shp" should be only accessed read-only

Harmless but: annoying and confusing in the terminal. Johannes Kroeger

12:36 PM Bug report #17980: "resources/data/world_map.shp" should be only accessed read-only

This is harmless - OGR tries to open r/w and falls back to r/o after that. But this is just for the map display in th... Jürgen Fischer

12:31 PM Bug report #17980 (Closed): "resources/data/world_map.shp" should be only accessed read-only

Jürgen Fischer

06:36 PM Bug report #18894: Qgis crashes on deleting auxiliary storage

Working here in Linux. you can share a demo project for testing? Nelson José Silva

11:53 AM Bug report #18894 (Closed): Qgis crashes on deleting auxiliary storage

h2. User Feedback
h2. Report Details
*Crash ID*: 8d048721aaa72ca66312f112144c1a969d77a058
*Stack Trace... Johannes Metzler

05:09 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....

Uroš Preložnik wrote:
> Giovanni Manghi wrote:
> > No one (as far as I understand) will look at this because a) on ... Giovanni Manghi

04:37 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....

Giovanni Manghi wrote:
> No one (as far as I understand) will look at this because a) on Linux has a clear "workarou... Uroš Preložnik

04:36 PM Bug report #18896 (Closed): "Hide deprecated CRSs" functionality not working properly in the Coor...

The *"Hide deprecated CRSs"* functionality in the Coordinate Reference System Selector dialog (Project Properties | C... Andrea Giudiceandrea

04:24 PM Bug report #18895 (Closed): Translate (convert format) ignores nodata value of zero

When using the "Translate (convert format)" processing tool in QGIS 3.0.2, it is not possible to specify a NODATA val... Keith Jenkins

04:02 PM Bug report #18558: QGIS crash with SQL Server layer

Richard Duivenvoorde wrote:
> You should be able to do that yourself, I always forget though how to open all this pr... Antony Zonato

03:38 PM Bug report #18558: QGIS crash with SQL Server layer

You should be able to do that yourself, I always forget though how to open all this properties again. But I'm almost ... Richard Duivenvoorde

03:22 PM Bug report #18558: QGIS crash with SQL Server layer

Hi Francisco. I wrote to Richard so that the regression status could be changed. Antony Zonato

08:08 AM Bug report #18558: QGIS crash with SQL Server layer

I'm sorry Antony Zonato but I don't know how to make that modification, how to change the issue? Francisco Jose Campos Menendez

03:23 PM Bug report #18781: QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Nyall Dawson wrote:
> Can you share your data?
Sure, here is it
And this is the necessary code... Roger Gonzalez

03:23 PM Bug report #18781: QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Nyall Dawson wrote:
> Can you share your data?
Sure, here is it
And this is the necessary code... Roger Gonzalez

12:22 PM Bug report #16428 (Open): Processing UI forms not rendering properly

Still true in current master.
Renaming the qgis_customwidgets.py works for me. Regis Haubourg

12:06 PM Bug report #18227: GeoReferencer crash

OK found one here: https://github.com/qgis/QGIS/pull/6626
It has been merged in master. Any chance to have this ba... Regis Haubourg

12:04 PM Bug report #18227: GeoReferencer crash

Can you point a link to the relevant PR please? Regis Haubourg

11:17 AM Bug report #18557: Layout Setup of Page not working

I think the "Page Setup" does not work at all (Windows 10). Page properties shows the correct settings!
Right know p... Thomas HG

03:10 AM Bug report #18893 (Closed): Error when trying to search New Zealand (LINZ Data Service) CSW

Hi
Using QGIS 3.0.1 and MetaSearch 0.3.5. In the MetaSearch 'search' dialog, I get an error when selecting "New Ze... Bill Nelson

2018-05-01

10:30 PM Bug report #18892 (Closed): Scale jump from mouse tremor

Previously reported for 2.18.15 but closed as having been fixed for QGIS 3, but unfortunately has not been fixed.
... Garth Fletcher

10:18 PM Bug report #18891 (Open): Changed Ruler distance units do not "stick" - instead always revert to ...

The "Ruler" (Interactive Measuring Tool) distance units always reverts to Meters when another tool (e.g., Pan) is sel... Garth Fletcher

08:56 PM Bug report #18886 (Closed): ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

Applied in changeset commit:qgis|c63260e109411b3bcdc547c462212e3a5141e6b7. Nyall Dawson

08:56 PM Bug report #18886 (Closed): ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

Applied in changeset commit:qgis|c63260e109411b3bcdc547c462212e3a5141e6b7. Nyall Dawson

08:55 PM Bug report #18870 (Closed): SAGA ... Channel Network and Drainage Basins fails due to Threshold ...

Applied in changeset commit:qgis|c2f224b4462887bcc252a48b2c3c602bf5aee6bc. Nyall Dawson

08:55 PM Bug report #18870 (Closed): SAGA ... Channel Network and Drainage Basins fails due to Threshold ...

Applied in changeset commit:qgis|c2f224b4462887bcc252a48b2c3c602bf5aee6bc. Nyall Dawson

08:55 PM Bug report #18871 (Closed): Matrix parameter does not respect default value

Applied in changeset commit:qgis|c68262da7fa19906411bf76c26a698b9758a0c90. Nyall Dawson

08:55 PM Bug report #18871 (Closed): Matrix parameter does not respect default value

Applied in changeset commit:qgis|c68262da7fa19906411bf76c26a698b9758a0c90. Nyall Dawson

08:55 PM Bug report #18790 (Closed): [Layout] drag-and-drop a layout template from file browser can create...

Applied in changeset commit:qgis|b63733ed96636e8b064550597c23196b84b88b53. Nyall Dawson

08:55 PM Bug report #18790 (Closed): [Layout] drag-and-drop a layout template from file browser can create...

Applied in changeset commit:qgis|b63733ed96636e8b064550597c23196b84b88b53. Nyall Dawson

04:00 AM Bug report #18790 (In Progress): [Layout] drag-and-drop a layout template from file browser can c...

Nyall Dawson

05:50 PM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

When and if the compile is completed without error.
I can do the "make install"
After this I have in /usr/local/inc... aperi2007 -

05:45 PM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

Do you have qgis headers installed in /usr/local/include?
Jürgen Fischer

03:48 PM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

done.
I attach the log result from cmake.
aperi2007 -

03:30 PM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

aperi2007 - wrote:
> The configuration are these:
> After the second time I press the "g" to generate and exit from... Jürgen Fischer

02:57 PM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

The configuration are these:
After download the package:
I explode it in the QGIS-final-2_18_19 folder.
Afte... aperi2007 -

02:07 PM Bug report #18888 (Feedback): QGIS 2.18 branch 2.18 release 2.18 and over don't compile

Please also include the configuration step (esp. important as you are not using stretch's dependencies) Jürgen Fischer

10:06 AM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

I try newly.
I download
https://github.com/qgis/QGIS/archive/final-2_18_19.tar.gz
After do these steps:... aperi2007 -

09:05 AM Bug report #18888: QGIS 2.18 branch 2.18 release 2.18 and over don't compile

aperi2007 - wrote:
> Hi,
> I see the QGS-Server section of QGIS branch 2_18 release 2.19 or 2.18 don't compile at a... Jürgen Fischer

09:11 AM Bug report #18065: Processing Modeler UI input widgets do not resize

I am also seeing this. Installing QGIS nightly builds on Ubuntu 17.10 VM with not much else on it. Behaviour is dif... Chris Crook

08:16 AM Bug report #18890 (Closed): 3D map view crashes when enabling 3d rendering on vector layers

h2. User Feedback
- Added DEM layer, local tiff
- Opened 3D view
- Used DEM layer as terrain
- Hid DEM layer
-... Michael Hewett

07:05 AM Bug report #18781 (Feedback): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Can you share your data? Nyall Dawson

03:30 AM Bug report #18791 (Closed): Diagrams: Histogram - Bar width limited to 99.99 but units linked bar...

Applied in changeset commit:qgis|3228654e5bf99523c273b2e2cb10f66eb0d70bd8. Nyall Dawson

03:30 AM Bug report #18791 (Closed): Diagrams: Histogram - Bar width limited to 99.99 but units linked bar...

Applied in changeset commit:qgis|3228654e5bf99523c273b2e2cb10f66eb0d70bd8. Nyall Dawson

2018-04-30

12:53 AM Bug report #18886 (In Progress): ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

PR: https://github.com/qgis/QGIS/pull/6898 Nyall Dawson

12:53 AM Bug report #18886 (In Progress): ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

PR: https://github.com/qgis/QGIS/pull/6898 Nyall Dawson

12:59 PM Bug report #18886: ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

For an example of a recursive Group Layer structure, see layer 'Jersey Gas' on the same server (a Group Layer). It ha... Bruce Steedman

12:51 PM Bug report #18886 (Closed): ArcGIS 'Group Layer' incorrectly added by ArcGisFeatureServer

I have added a connection to following Feature Server url: http://dcw7.digimap.je/arcgis/rest/services/JerseyUtilitie... Bruce Steedman

12:41 AM Bug report #18885 (In Progress): Processing native Clip algorithm does not copy the attribute table

Caused by memory provider rejecting the field with the "/" in its name Nyall Dawson

12:32 PM Bug report #18885: Processing native Clip algorithm does not copy the attribute table

Forgot to say: if the output of Processing is treated as temporary. If it is saved on the disk it works nice matteo ghetta

12:31 PM Bug report #18885 (Closed): Processing native Clip algorithm does not copy the attribute table

Even if the tool work fine (even with different CRS) the attribute of the original layer is not copied to the final o... matteo ghetta

10:14 PM Bug report #18887 (Closed): qgis-bin-g7.4.0.exe stopped working (python console)

Solution is not to use print outside of console applications - use the safer QgsMessageLog class instead. Nyall Dawson

10:14 PM Bug report #18887 (Closed): qgis-bin-g7.4.0.exe stopped working (python console)

Solution is not to use print outside of console applications - use the safer QgsMessageLog class instead. Nyall Dawson

12:52 PM Bug report #18887 (Closed): qgis-bin-g7.4.0.exe stopped working (python console)

I got a crash when I used the python console to test some code. I attach below the code, simplified as much as possib... Antoine Lafranchis

10:11 PM Bug report #18881 (In Progress): QGIS cannot recognise CRS from ESRI wkt on ArcGIS Feature Server

PR at
https://github.com/qgis/QGIS/pull/6888 Nyall Dawson

10:11 PM Bug report #18881 (In Progress): QGIS cannot recognise CRS from ESRI wkt on ArcGIS Feature Server

PR at
https://github.com/qgis/QGIS/pull/6888 Nyall Dawson

01:29 PM Bug report #18881: QGIS cannot recognise CRS from ESRI wkt on ArcGIS Feature Server

Update: I found a workaround; if I add the layer, edit the properties/Source and change the Coordinate reference syst... Bruce Steedman

06:29 PM Bug report #18889 (Open): Clipping feature errors trying to clip raster file on Mac (QGIS 3.0.2)

When using feature RASTER > EXTRACTION > CLIP RASTER BY MASK LAYER
Mask is a vector file
QGIS fails with messag... Robert Catherman

05:48 PM Bug report #18888 (Closed): QGIS 2.18 branch 2.18 release 2.18 and over don't compile

Hi,
I see the QGS-Server section of QGIS branch 2_18 release 2.19 or 2.18 don't compile at all.
It return this erro... aperi2007 -

01:36 PM Bug report #18873: XYZ Tile Server with custom CRS not working in 2.18 LTS

Related to #18881 re incorrect crs parsed from ESRI wkt on server.
Also, problem still exists in QGIS v3.02 on Ubu... Bruce Steedman

11:58 AM Bug report #18882: Attempting to add layer using site-wide WFS get capabilities URL in QGIS 3 err...

See updated conversation here: https://github.com/qgis/QGIS/commit/ccb4c80f8a6d2bb179258f1ffec0dc9a447ca465#commitco... Jeremy Palmer

06:10 AM Bug report #18882: Attempting to add layer using site-wide WFS get capabilities URL in QGIS 3 err...

Not this server is using geoserver in the backend as they implement TYPENAME. So I assume TYPENAMES is getting ignore... Jeremy Palmer

05:59 AM Bug report #18882: Attempting to add layer using site-wide WFS get capabilities URL in QGIS 3 err...

When you change TYPENAMES to TYPENAME it return straight away.
I think the commit is the reason why it works in 2.... Jeremy Palmer

04:05 AM Bug report #18882 (Feedback): Attempting to add layer using site-wide WFS get capabilities URL in...

Seems to get stuck on requesting
https://data.linz.govt.nz/services;key=KEY/wfs?SERVICE=WFS&REQUEST=DescribeFeatur... Nyall Dawson

11:06 AM Bug report #18740: is a WFS layer is large enough then identifying a feature in QGIS with the "au...

Even Rouault wrote:
> I didn't do significant changes in the WFS provider in months, so if this is a regression, per... Giovanni Manghi

08:33 AM Bug report #18884 (Open): Add option to log URL requests

Add an new feature to log QGIS HTTP(s) URL calls in QGIS logging network tab. This should available as a debugging op... Jeremy Palmer

2018-04-29

01:46 AM Bug report #18883 (Closed): Rename "WMS" in Data Source Manager to "WMS/WMTS"

To be more clear "WMS" in the Data Source Manager should be renamed to "WMS/WMTS" or "WM(T)S" as it is in QGIS 2.18.
... Ian Harrison

01:23 AM Bug report #18882 (Closed): Attempting to add layer using site-wide WFS get capabilities URL in Q...

Attempted to add a WFS layer using a site-wide get capabilites: https://data.linz.govt.nz/services;key=API_KEY/wfs?se... Ian Harrison

10:39 PM Bug report #18796 (Open): PNG8 image encoding radio button for WMS is duplicated

Yes it's: https://data.linz.govt.nz/services;key=API_KEY/wms/layer-50767?service=WMS&version=1.1.1&request=GetCapabil... Ian Harrison

10:38 PM Bug report #18267: QGIS 3.0 WFS 2.0 not working

Is this provider generating storedQueries or using complex features? If so then it won't work, the QGIS WFS 2.0 provi... Jeremy Palmer

10:34 PM Bug report #18740: is a WFS layer is large enough then identifying a feature in QGIS with the "au...

I didn't do significant changes in the WFS provider in months, so if this is a regression, perhaps a "git bisect" exe... Even Rouault

10:16 PM Bug report #18740: is a WFS layer is large enough then identifying a feature in QGIS with the "au...

I also get this problem for large layers, but only for QGIS 3.0. When I load a layer with restrictToRequestBBOX='1' i... Jeremy Palmer

09:00 PM Bug report #18881 (Closed): QGIS cannot recognise CRS from ESRI wkt on ArcGIS Feature Server

I am using ArcGisFeatureServer to read Feature Layers from an ArcGIS server url:
https://roadworks.gov.je/arcgis/r... Bruce Steedman

07:52 PM Bug report #18880 (Open): [Processing] "Extract layer extent" should not blindly trust layer exte...

I have a PostgreSQL layer with a wrong extent (not all the features are shown when zooming to layer - see #18879).
... Harrissou Santanna

07:40 PM Bug report #18879 (Open): [Layers Properties] "Update extents" button does not work

I have a postgreSQL layer whose extent is wrong (zoom to layer command only shows partial data, however coherent with... Harrissou Santanna

07:16 PM Bug report #18878 (Open): Unable to paste a layer in an empty project

Open a project, select a layer in the Layers panel, right-click and Copy layer
Open a new instance of QGIS and go to... Harrissou Santanna

12:07 PM Bug report #18877 (Closed): Maximum recursion depth exceeded after adding a model or script to th...

When I edit "Providers option" or I add a new model/script to the Processing list, i receive "Maximum recursion dept... Oki Sir

12:02 PM Bug report #18876 (Closed): Bad/malformed command string when launching TauDem script (2.18.17)

When i try to launch a TauDem script, the corresponding command string is malformed (i think that path parsing/escapi... Oki Sir

11:58 AM Bug report #18875 (Closed): Bad/malformed command string when launching TauDem script

When i try to launch a TauDem script, the corresponding command string is malformed (all words are splitted in single... Oki Sir

2018-04-28

11:53 PM Feature request #18800: Enhanced filter handling

Patrick, have you seen the changes introduced by https://github.com/qgis/QGIS/pulls/6057? Also, you may be interested... Harrissou Santanna

10:03 PM Bug report #13203: When opening Shapefile the .cpg file is ignored in Windows 8.1

+1, same problem here on Windows... Quan Tum

09:00 PM Bug report #18872: Symbol Selector Window 'overflows' the screen on small resolutions

I think this issue should be fixed by https://github.com/qgis/QGIS/pulls/5976 (switching from a widget to a real resi... Harrissou Santanna

02:37 PM Bug report #18872 (Closed): Symbol Selector Window 'overflows' the screen on small resolutions

At a resolution of 1280x720, the symbol selector window tends to be larger than the screen when the symbol fill type ... Bien Carlos Manazares

05:07 PM Bug report #18874 (Open): QGIS 3D map viewer crashes on WCS/WMTS layers in 3.0.2

When loading a WCS elevation model plus WMTS aerial photography and then opening a new 3D map, QGIS 3.0.2 repeatedly ... JW van Aalst

04:38 PM Bug report #18080: Vector Fixed Distance Buffer

As already stated, I think this is a duplicate of #17291, which was closed with Resolution "wontfix" with the recomme... Steve Lowman

04:33 AM Bug report #18080 (Reopened): Vector Fixed Distance Buffer

I am requesting to reopen this case. Please accept my apologies for my procrastination on the matter.
I have tri... Douglas Alderman

02:35 AM Bug report #18080: Vector Fixed Distance Buffer

Yes, the SAGA "Fixed Distance Buffer" works. The QGIS "Fixed Distance Buffer" did not work several times for me, lea... Douglas Alderman

03:41 PM Bug report #18873 (Open): XYZ Tile Server with custom CRS not working in 2.18 LTS

I have added the following URL pattern as an XYZ Tile Server connection:
http://dcw7.digimap.je/arcgis/rest/servic... Bruce Steedman

11:35 AM Bug report #18871 (Closed): Matrix parameter does not respect default value

When matrix parameter defined with some default value, this value does not apply. For example,... Alexander Bruy

10:51 AM Bug report #18774 (Closed): master does not build in fedora 28 after final freeze using buildrpms...

Seems to be fixed in commit:1af0f4c7cb87cb64c157b5de5f4b5dc72ba78102 Basil Eric Rabi

2018-04-27

08:32 PM Bug report #18870 (Closed): SAGA ... Channel Network and Drainage Basins fails due to Threshold ...

Processing > SAGA > Terrain Analysis - Channels > "Channel Network and Drainage Basins" requires only 2 inputs: Eleva... Garth Fletcher

07:42 PM Bug report #18869 (Open): 2.18 Raster Style qml's not applying correctly in QGIS 3.4

New Description: After loading a .qml raster layer style in QGIS 3.0,3.2,3.4 that was created in 2.18, the raster sty... Sarah Popov

05:59 PM Bug report #18867 (Open): Georeferencer incorrectly shows last image when reopened

*Steps to reproduce:*
* Open Georeferencer
* Open raster .tif image
* Add some GCP points
* In the options, choos... Antoine Lafranchis

05:11 PM Bug report #18558: QGIS crash with SQL Server layer

Tested with 3.0.2, and it still crashes. Francisco, can you change the issue to "Regression = yes"? It worked with 2.... Antony Zonato

04:41 PM Bug report #18866 (Closed): 1:n relation: "On map identification" relation widget does not update...

With 2 geometric layers, with the "On map identification" option of Reference Widget enabled, when clicked on a new f... matteo ghetta

2018-04-26

11:21 PM Bug report #18812 (Closed): QGIS 3.0.1 crashes after attempting to remove a virtual field from a ...

h2. User Feedback
QGIS crashed when I tried to delete a virtual field from a shapefile.
I experienced two other... Carolyn Krause

01:31 PM Bug report #18811 (Open): F7 shortcut does not open the Layers styling panel if the Layers panel ...

If you press F7 when the Layers panel is closed, nothing (open nor close) happens to the Layer styling panel.
Enable... Harrissou Santanna

01:28 PM Bug report #18810 (Open): Two different default shortcuts for the Layer styling panel (F7 vs Ctrl+3)

Right-click over panels or View --> Panels show that the Layer Styling panel can be enabled using Ctrl+3 shortcut
Fr... Harrissou Santanna

11:16 AM Bug report #18809 (Open): GeoReferencer - wrong projection referance

I put map to referance. Set epsg:3395 for file and map window.
Check points on file and map. Click <Begin> and... fi... Andrew Shanin

2018-04-25

10:21 PM Bug report #18808 (Closed): Expression builder dialog shows by default an output preview value (1...

Open an expression builder dialog
Bottom left: _preview output: 123232_ is shown.
This information does not make s... Harrissou Santanna

09:30 PM Bug report #18806 (Feedback): Cursor is misaligned when drawing new vectors

Hi Steven
No image attached. Harrissou Santanna

07:43 PM Bug report #18806 (Closed): Cursor is misaligned when drawing new vectors

When adding a new feature the target cross-hair is misaligned with the actual shape being drawn. Please see attached ... Steven Bernard

09:08 PM Bug report #18807: Enabling/disabling algorithm providers as well as creating/removing preconfigu...

It happens when the algorithm list is refreshed after adding or removing a preconfigred algorithm (and probably any o... Borys Jurgiel

08:58 PM Bug report #18807 (Closed): Enabling/disabling algorithm providers as well as creating/removing p...

Since commit:c83261395476b62f6, adding or removing preconfigured algorithms leads to a loop that causes an exception:... Borys Jurgiel

07:17 PM Bug report #18805 (Open): [Layer properties] Text on symbols group not updated when the layer sym...

Open layer properties
in symbology tab, apply a new symbology
Click Apply to render the changes in the map canvas a... Harrissou Santanna

03:31 PM Bug report #15600: Selecting features feature in spatial views and virtual layers leads to wrong ...

Problem still persists in 3 as well with PostGIS layers. Ordinary file based layers are ok though Leon van der Meulen

01:43 PM Bug report #18804 (Closed): Crashed on build raster pyramid.

h2. User Feedback
Crashed on build raster pyramid from 5.3GB tiff file.
Judging from the fact that the prog... Jeongyong Park

01:14 PM Bug report #18803 (Closed): Flip order of lower and upper class values for graduated symbology

In the graduated symbology 'Class' column, one can manually set the upper and lower range of the class.
Doing so ope... Harel Dan

11:53 AM Bug report #18802 (Closed): Mesh layer with unknown CRS

This is related to:
https://github.com/qgis/QGIS/pull/6820
I have set my QGIS to Prompt for layers with unknown C... Saber Razmjooei

11:50 AM Bug report #18801 (Closed): QGIS project containing mesh layer fails to open the ML

This is related to:
https://github.com/qgis/QGIS/pull/6820
Open QGIS
Add a mesh layer (in my case 2dm).
Save th... Saber Razmjooei

10:31 AM Bug report #18769 (Closed): Matrix Input of Processing Modeler does not have columns

Duplicates https://issues.qgis.org/issues/18734 Alexander Bruy

10:31 AM Bug report #18769 (Closed): Matrix Input of Processing Modeler does not have columns

Duplicates https://issues.qgis.org/issues/18734 Alexander Bruy

10:31 AM Bug report #18769 (Closed): Matrix Input of Processing Modeler does not have columns

Duplicates https://issues.qgis.org/issues/18734 Alexander Bruy

10:26 AM Bug report #18762 (Rejected): Raster > Conversion > Rasterize error

There is nothing wrong here, you have set horizontal resolution to 10.0 and leave vertical resolution as zero. Alexander Bruy

10:26 AM Bug report #18762 (Rejected): Raster > Conversion > Rasterize error

There is nothing wrong here, you have set horizontal resolution to 10.0 and leave vertical resolution as zero. Alexander Bruy

10:26 AM Bug report #18762 (Rejected): Raster > Conversion > Rasterize error

There is nothing wrong here, you have set horizontal resolution to 10.0 and leave vertical resolution as zero. Alexander Bruy

10:26 AM Bug report #18762 (Rejected): Raster > Conversion > Rasterize error

There is nothing wrong here, you have set horizontal resolution to 10.0 and leave vertical resolution as zero. Alexander Bruy

08:43 AM Bug report #18110: Unable to create a tempory raster when calling IDW SAGA from python ('NoneType...

I had un-assigned by error.
Thanks for any help Jean Hemmi

2018-04-24

12:43 AM Feature request #18800 (Open): Enhanced filter handling

The following capabilities would be useful in respect of filters as I use them a lot and often with a number of layer... Patrick Dunford

10:55 PM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

Also, I can't really understand why I can print PDF with map, legend and scale and if I want to print simple text box... Uroš Preložnik

02:28 PM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

Please don't leave this issue as fixed already. We need full instructions on DISPLAY variable and fake xserver, becau... Uroš Preložnik

09:45 PM Bug report #15440 (Feedback): QGIS Server: GetPrint crashes on Windows when there are advanced e...

No one (as far as I understand) will look at this because a) on Linux has a clear "workaround" and b) on QGIS 3 does ... Giovanni Manghi

09:43 PM Bug report #18295 (Closed): PostGIS Data Loads Extemely Slow

I cannot see this anymore, at least on master. Reopen of necessary. Giovanni Manghi

09:43 PM Bug report #18295 (Closed): PostGIS Data Loads Extemely Slow

I cannot see this anymore, at least on master. Reopen of necessary. Giovanni Manghi

09:41 PM Bug report #18781 (Reopened): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Roger Gonzalez

04:30 PM Bug report #18799 (Feedback): Crash on exit from qgis 3.0.2

Crash ID: f4aadb7776eb6d3dfe9d269cf1e0d87d6650dde0
Stack Trace
GDALAllRegister :
GDALAllRegister :
GDALRa... Andrew Shanin

04:28 PM Bug report #18798 (Rejected): Polygon Shapefile loaded as Multipolygon

If a polygon shapefile is loaded in QGIS 3, the geometries are of type MULTIPOLYGON whereas in older Versions of QGIS... Peter Gipper

06:46 AM Bug report #18796 (Feedback): PNG8 image encoding radio button for WMS is duplicated

Can you share the wms url used? Nyall Dawson

03:37 AM Bug report #18796 (Closed): PNG8 image encoding radio button for WMS is duplicated

PNG8 image encoding radio button for WMS is duplicated.
There are two PNG8 radio buttons side by side in the add WMS... Ian Harrison

2018-04-23

11:10 PM Bug report #16809 (Closed): QGIS silently fails to draw Oracle features with a curve in it

Applied in changeset commit:qgis|92a80894ac5e79e023b7be502afd2b84fec44483. Nyall Dawson

11:10 PM Bug report #16809 (Closed): QGIS silently fails to draw Oracle features with a curve in it

Applied in changeset commit:qgis|92a80894ac5e79e023b7be502afd2b84fec44483. Nyall Dawson

11:10 PM Feature request #12675 (Closed): Arcs are not displayed from an Oracle spatial layer

Applied in changeset commit:qgis|92a80894ac5e79e023b7be502afd2b84fec44483. Nyall Dawson

11:10 PM Feature request #12675 (Closed): Arcs are not displayed from an Oracle spatial layer

Applied in changeset commit:qgis|92a80894ac5e79e023b7be502afd2b84fec44483. Nyall Dawson

10:41 PM Bug report #18794: QGIS 3.0.2 crash on startup

Hi Ben, can you add some more details so we can try to reproduce:
- what Windows version are you using?
- which i... Richard Duivenvoorde

07:53 PM Bug report #18794 (Closed): QGIS 3.0.2 crash on startup

I'm having the same issue on 3.0.2 as I did on 3.0.1 and 3.0.0. I can download the program just fine, but I get a cra... Ben Neely

09:52 PM Bug report #18793 (Open): QGis V3.0.2 crashes on use of plugin

Jürgen Fischer

09:17 PM Bug report #18793: QGis V3.0.2 crashes on use of plugin

Jürgen Fischer wrote:
> Which plugin are you referring to?
It is a plugin i wrote myself and convert it from Qgis... N. Veenstra

09:17 PM Bug report #18793: QGis V3.0.2 crashes on use of plugin

Jürgen Fischer wrote:
> Which plugin are you referring to?
It is a plugin i wrote myself and convert it from Qgis... N. Veenstra

01:26 PM Bug report #18793 (Feedback): QGis V3.0.2 crashes on use of plugin

Which plugin are you referring to? Jürgen Fischer

12:59 PM Bug report #18793 (Open): QGis V3.0.2 crashes on use of plugin

Afher update QGIS is crashed on running a plugin.
Before the update no problem (3.0.1)
Below the report:... N. Veenstra

09:36 PM Bug report #18795 (Closed): Crashed on saving a project

h2. User Feedback
h2. Report Details
*Crash ID*: 869047353095a6d6b8174b0f04014bb526cbbfb5
*Stack Trace... Saleh Babazadeh

09:08 PM Bug report #18477: QGIS 3 "unable to save auxiliary storage"

I also have experienced this issue. Running Mac OS 10.13.3 on Early 2015 MacBook Pro Retina. Brendan Heberlein

07:55 PM Bug report #18792 (Feedback): Simplify for Polyline does not work

Can you provide more details? What does it do/not do? Nyall Dawson

07:23 AM Bug report #18792 (Closed): Simplify for Polyline does not work

The core function Simplify does not work for Polyline Features (Douglas-Peuker Alg) Thang Quach

07:25 PM Bug report #17156 (Closed): Some features not drawn using Oracle as data source

Nyall Dawson

08:21 AM Bug report #17156: Some features not drawn using Oracle as data source

Nyall Dawson wrote:
> Can you attach WKT or the Oracle geoemtry definition for the features which are missing?
Hi... Casper Børgesen

07:11 PM Feature request #9473 (Closed): Migrate point diplacement style to new labelling engine

Harrissou Santanna

03:28 PM Bug report #18781: QgsProject.instance().geometry().asPolyline() not working on QGIS 3

Nyall Dawson wrote:
> That's 2.x API - you need to change your code to use the 3 API
That code uses 3 API... Roger Gonzalez

11:50 AM Bug report #14448 (Reopened): Offset curve tools duplicate lines

Set as regression given that it seems to work in 2.8 Harrissou Santanna

11:50 AM Bug report #14448 (Reopened): Offset curve tools duplicate lines

Set as regression given that it seems to work in 2.8 Harrissou Santanna

11:50 AM Bug report #14448 (Reopened): Offset curve tools duplicate lines

Set as regression given that it seems to work in 2.8 Harrissou Santanna

11:50 AM Bug report #14448 (Reopened): Offset curve tools duplicate lines

Set as regression given that it seems to work in 2.8 Harrissou Santanna

10:17 AM Bug report #14448: Offset curve tools duplicate lines

We found the problem in QGIS 2.18.19 and it is related to saving:
We use two layers, we do not create the offset-v... Damiano Geppini

02:26 AM Bug report #18791 (Closed): Diagrams: Histogram - Bar width limited to 99.99 but units linked bar...

In version 3.0.2 the units for bar width are linked the units for bar length, but the upper limit for bar width is 99... Les Dowling

2018-04-22

12:10 AM Feature request #18693 (Closed): include python3-pypiwin32 in windows standalone installer

Jürgen Fischer

03:25 PM Bug report #18601 (Open): QGIS3: texts with leading zero get integers

Jürgen Fischer

01:18 PM Bug report #18789: Import of CSV-Data

Not sure on what basis QGIS decides the column type, but you could use a csvt file:
https://anitagraser.com/2011/0... Richard Duivenvoorde

10:58 AM Bug report #18789 (Closed): Import of CSV-Data

Hello everyone,
I'm not sure if it's actually a bug or just me.
Yesterday I tried to import a csv-file with numero... Christian Brechler

12:41 PM Bug report #18790 (Closed): [Layout] drag-and-drop a layout template from file browser can create...

Drag-and-drop a layout template from file browser onto QGIS canvas
You'll be asked to select a name for the layout
... Harrissou Santanna

12:27 PM Bug report #18786: Test button in rule based styling returns wrong number of features when calcul...

Had a short look:
- confirmed that apparently the renderer solves the expressions... Richard Duivenvoorde

09:00 AM Bug report #18786: Test button in rule based styling returns wrong number of features when calcul...

Oh, forgot to mention, but the behaviour of the test button was correct in 2.18. Erik Meerburg

08:39 AM Bug report #18786 (Open): Test button in rule based styling returns wrong number of features when...

Hi,
When making a rule based legend using a calculation, I ran into this one.
I've got two fields, both Integers.... Erik Meerburg

11:00 AM Feature request #18776: Geometry generator save to layer

"Geometry by expression" algorithm is a QGIS 3.0 feature (so not available in 2.18) Harrissou Santanna

08:53 AM Feature request #18776: Geometry generator save to layer

Please tell how to do it? I can't find this tool in 2.18.
Processing module installed.
Or add this feature to rigth... Andrew Shanin

10:39 AM Feature request #18788 (Open): [Layout] Allow to change properties of grouped items all together

In a print layout, group a selection of items
Select the group, enable the item properties panel: it's empty.
It c... Harrissou Santanna

10:30 AM Bug report #18787 (Open): [Layout] no way to identify/interact with a group when it's another gro...

In a print layout add a couple of items, select them and right-click, group them (groupA)
Selecting the group shows ... Harrissou Santanna

08:29 AM Feature request #18785 (Open): [Layout] Increment layout items ID by default

In print layout window, creating map items increments their ID, making it unique by default, eg, "Map 1", "Map 2", "M... Harrissou Santanna

2018-04-21

11:31 PM Bug report #18784 (Closed): «Feature has too many attributes» warning with virtual field

The error message «Feature has too many attributes (expecting 1, received 2)» appears when adding elements to a layer... Antoine Lafranchis

03:52 PM Feature request #18693: include python3-pypiwin32 in windows standalone installer

some own plugins which use windows wm_copydata messages. do you need more details? Jan Lippmann

03:17 PM Feature request #18693: include python3-pypiwin32 in windows standalone installer

What requires the extension? Jürgen Fischer

02:16 PM Bug report #18601: QGIS3: texts with leading zero get integers

Sorry, it's often very hard to find the correct category. I don't have have a clue, which is the right one this time.... Tobias Wendorff

02:09 PM Bug report #18601 (Feedback): QGIS3: texts with leading zero get integers

Is this using the delimited text provider? Or ogr? You've marked it as the delimited text provider yet only ogr suppo... Nyall Dawson

01:50 PM Bug report #10374 (Closed): moving object function disabled with Oracle provider

Appears not to be a qgis issue Nyall Dawson

01:50 PM Bug report #10374 (Closed): moving object function disabled with Oracle provider

Appears not to be a qgis issue Nyall Dawson

01:50 PM Bug report #10374 (Closed): moving object function disabled with Oracle provider

Appears not to be a qgis issue Nyall Dawson

01:45 PM Bug report #16761 (Closed): QGIS randomly crashing when writing vector from Oracle sdo layer

Answers were provided on stackexchange Nyall Dawson

01:45 PM Bug report #16761 (Closed): QGIS randomly crashing when writing vector from Oracle sdo layer

Answers were provided on stackexchange Nyall Dawson

01:43 PM Bug report #17156 (Feedback): Some features not drawn using Oracle as data source

Can you attach WKT or the Oracle geoemtry definition for the features which are missing? Nyall Dawson

01:23 PM Feature request #18783 (Open): switch to turn off GPKG filename in layers tree

Right now, the complete filename of a GPKG file is shown in front of each layer name.
If you now have explanatory fi... Tobias Wendorff

01:10 PM Feature request #18782 (Open): charset dialog window

QGIS parses shapefiles with or without a CPG file to UTF-8 by default.
You can override this manually, but this ofte... Tobias Wendorff

2018-04-20

01:47 AM Bug report #18779 (Closed): Crash on editing a vector layer

Duplicate of #14752 Nyall Dawson

01:47 AM Bug report #18779 (Closed): Crash on editing a vector layer

Duplicate of #14752 Nyall Dawson

05:52 PM Bug report #18779 (Closed): Crash on editing a vector layer

h2. User Feedback
Editing a vector layer, removing duplicate vertices, object snapping and topologic editing activ... Thomas Claaßen

12:39 AM Bug report #18781 (Closed): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

That's 2.x API - you need to change your code to use the 3 API Nyall Dawson

12:39 AM Bug report #18781 (Closed): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

That's 2.x API - you need to change your code to use the 3 API Nyall Dawson

07:39 PM Bug report #18781 (Closed): QgsProject.instance().geometry().asPolyline() not working on QGIS 3

The next code only works on 2.xx versions of QGIS, returning empty list when it should export Polylines coordinates l... Roger Gonzalez

06:36 PM Bug report #18780 (Open): Hang on editing vector layer

ENVIRONMENT:
QGIS 3.0.1 on Fedora 26
DATA:
GeoPackage or Shapefile, vector layer, ~70,000 features (US Censu... Nick Judd

05:35 PM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

I finally was able to test QGIS Server (master) on a Desktop Ubuntu installation, and this "issue" is not anymore. Mu... Giovanni Manghi

02:32 AM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

Giovanni Manghi wrote:
> > I have just tested on a VM (Ubuntu Desktop 12.04 installed from scratch) and GetPrint wor... Giovanni Manghi

05:17 PM Bug report #18778 (Open): [Layout] The layout canvas size is not refreshed when a page is removed

Add two pages to a layout
Zoom full in order to view all the pages
Right-click on one of the pages -> Remove Page
... Harrissou Santanna

04:47 PM Bug report #18249 (Closed): QGIS Server 2.18 much slower than 2.14 (at least for WFS getfeature r...

Roberto Marzocchi wrote:
> Now it works fine! Confgratulation to René-Luc ReLuc! In my opinion we can close this tic... Giovanni Manghi

04:47 PM Bug report #18249 (Closed): QGIS Server 2.18 much slower than 2.14 (at least for WFS getfeature r...

Roberto Marzocchi wrote:
> Now it works fine! Confgratulation to René-Luc ReLuc! In my opinion we can close this tic... Giovanni Manghi

02:11 PM Bug report #18197 (Closed): MetadataURL isn't required but his type is required

Applied in changeset commit:qgis|0edb0d9858fd05491b5dd6ece9a9859e8d4730d5. Paul Blottiere

02:11 PM Bug report #18197 (Closed): MetadataURL isn't required but his type is required

Applied in changeset commit:qgis|0edb0d9858fd05491b5dd6ece9a9859e8d4730d5. Paul Blottiere

11:46 AM Bug report #18773: Geometry generator inside Point Cluster style uses project CRS instead of laye...

In the project I attached, the red features are non-clustered geometry generators, and have the correct appearance - ... Tom Chadwin

11:25 AM Feature request #18777 (Open): [Processing] Mention layer name when algorithm fails due to invali...

I'm doing some spatial join and it fails due to invalid geometry. In the Log panel, the message is
> Feature (36802... Harrissou Santanna

11:20 AM Bug report #18515: QGIS 3.0 Can't Connect to PostgreSQL from DB Manager: PermissionError

I have the same issue. Also the Toolbox -> Database -> Import into PostGIS function gives the same error.... Jkr Da

10:28 AM Feature request #18776 (Closed): Geometry generator save to layer

You can use the processing "geometry from expression" algorithm to do this - just copy your generator expression. Nyall Dawson

10:28 AM Feature request #18776 (Closed): Geometry generator save to layer

You can use the processing "geometry from expression" algorithm to do this - just copy your generator expression. Nyall Dawson

08:21 AM Feature request #18776 (Closed): Geometry generator save to layer

Geometry generator is very cool feature.
Please add function to save this geometry to layer. It could be usefull f... Andrew Shanin

10:26 AM Feature request #16290 (Closed): Processing: warn user when units are in degrees

Applied in changeset commit:qgis|6a2625664e341f676808fb39fa40347d843aa955. Nyall Dawson

10:26 AM Feature request #16290 (Closed): Processing: warn user when units are in degrees

Applied in changeset commit:qgis|6a2625664e341f676808fb39fa40347d843aa955. Nyall Dawson

08:49 AM Bug report #18775 (Closed): Permission denied error when connecting to PostGIS DB with auth confi...

Jürgen Fischer

08:45 AM Bug report #18766: QGIS crash when opening a layout

Nyall Dawson wrote:
> It's the same underlying cause - an instability in the geos library on windows. When one is fi... Marjorie FANGAIN

02:37 AM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....

With QGIS Server 3 there is no crash on GetPrint... but it seems to suffer of several other issues (regressions) comp... Giovanni Manghi

2018-04-19

12:00 AM Bug report #18775 (Closed): Permission denied error when connecting to PostGIS DB with auth confi...

When trying to connect to a postgresql database with DB Manager with basic auth everything runs ok.
But when using ... Nikolay Lebedev

10:18 PM Bug report #18766 (Closed): QGIS crash when opening a layout

It's the same underlying cause - an instability in the geos library on windows. When one is fixed the other will also... Nyall Dawson

03:52 PM Bug report #18766 (Reopened): QGIS crash when opening a layout

Nyall Dawson wrote:
> Duplicate of #14752
Hi,
I'm sorry, but it seems that the 2 problems are quit different, no... Marjorie FANGAIN

01:57 PM Bug report #18766 (Closed): QGIS crash when opening a layout

Duplicate of #14752 Nyall Dawson

01:57 PM Bug report #18766 (Closed): QGIS crash when opening a layout

Duplicate of #14752 Nyall Dawson

12:04 PM Bug report #18766 (Feedback): QGIS crash when opening a layout

Can you please attach the crashing project with some (minimal) test data? Alessandro Pasotti

11:34 AM Bug report #18766 (Closed): QGIS crash when opening a layout

Hi,
I've started to use QGIS 3.0.1 since last week. I've created the project with QGIS 2.18. There are about 50 la... Marjorie FANGAIN

09:49 PM Bug report #11897: In Print composer, menu Setting should open only Composer options

Cannot test on 3.1 now. On 3.0 it was as in 2.18.
Thanks. Paolo Cavallini

09:41 PM Bug report #18773: Geometry generator inside Point Cluster style uses project CRS instead of laye...

Confirmed. This results in geometry expression functions operating differently on a clustered layer to an unclustered... Tom Chadwin

04:28 PM Bug report #18773 (Open): Geometry generator inside Point Cluster style uses project CRS instead ...

This problem occurs when the project CRS is different from the point layer CRS.
* If a geometry generator with onl... Michel Stuyts

07:05 PM Bug report #18774 (Closed): master does not build in fedora 28 after final freeze using buildrpms...

After the final freeze in fedora 28, master fails to build. A few days ago, master successfully builds. Basil Eric Rabi

04:01 PM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

> I have just tested on a VM (Ubuntu Desktop 12.04 installed from scratch) and GetPrint works without needing to in... Giovanni Manghi

03:59 PM Bug report #18747: QGIS Server GetPrint issue on Desktop Linux installations

Alessandro Pasotti wrote:
> I cannot reproduce on 2.18 if running the server with my current user inside an xterm.
... Giovanni Manghi

02:28 PM Bug report #18747 (Rejected): QGIS Server GetPrint issue on Desktop Linux installations

I cannot reproduce on 2.18 if running the server with my current user inside an xterm.
Btw I'd be surprised if it ... Alessandro Pasotti

02:28 PM Bug report #18747 (Rejected): QGIS Server GetPrint issue on Desktop Linux installations

I cannot reproduce on 2.18 if running the server with my current user inside an xterm.
Btw I'd be surprised if it ... Alessandro Pasotti

03:45 PM Bug report #18772 (Closed): improving a paragraph about 1:n relations

done. Giovanni Manghi

03:45 PM Bug report #18772 (Closed): improving a paragraph about 1:n relations

done. Giovanni Manghi

03:40 PM Bug report #18772: improving a paragraph about 1:n relations

Hi Giovanni,
This should be reported in "github repo":https://github.com/qgis/QGIS-Documentation/issues instead, whe... Harrissou Santanna

03:29 PM Bug report #18772 (Closed): improving a paragraph about 1:n relations

Because of #18771 Giovanni Manghi

03:12 PM Feature request #18771 (Open): 1:n relations: new entries in child layer when child has geometries

https://docs.qgis.org/2.18/en/docs/user_manual/working_with_vector/attribute_table.html#id25
If the child layer is... Giovanni Manghi

02:08 PM Bug report #18770: [Layout] Using an item variable to change its own properties dynamically does ...

I could have bet that I tried the refresh button unsuccessfully but i'd have lost... So yes, my list was not complete... Harrissou Santanna

01:56 PM Bug report #18770: [Layout] Using an item variable to change its own properties dynamically does ...

Other actions trigger a refresh too - e.g. clicking refresh, changing to a new atlas feature, exporting the layout.
Nyall Dawson

01:36 PM Bug report #18770 (Open): [Layout] Using an item variable to change its own properties dynamicall...

Let's add a map item and try to change its position using data-defined properties.
If I write expression like @case ... Harrissou Santanna

01:58 PM Bug report #18325 (Closed): Feature form is not remmebering last configuration

That's already fixed in 3.0.1 Nyall Dawson

01:58 PM Bug report #18325 (Closed): Feature form is not remmebering last configuration

That's already fixed in 3.0.1 Nyall Dawson

11:25 AM Bug report #18325: Feature form is not remmebering last configuration

Francisco Pérez Sampayo wrote:
> Actually, qgis3 remember the size and position at feature level. Maybe it could be ... Dan Isaacs

12:54 PM Bug report #18769 (Closed): Matrix Input of Processing Modeler does not have columns

Matrix input in model seems to have only rows and not columns. matteo ghetta

12:43 PM Bug report #18768: Nodata issue with TIN interpolation's cubic method

Here's a simple test dataset. To replicate the above screenshot, use the "temp" field against a TIN interpolation alg... Mathieu Pellerin - nIRV

12:41 PM Bug report #18768 (Feedback): Nodata issue with TIN interpolation's cubic method

I've just spotted an interesting issue with the TIN interpolation code.
With the TIN interpolation "linear" method... Mathieu Pellerin - nIRV

12:00 PM Bug report #18767 (Closed): Help button for Processing Modeller outdated

From QGIS 3 the Modeler has changed a while. The old help button allows to add information about the algorithm and ea... matteo ghetta

11:34 AM Bug report #18765 (Open): Join layer without custom prefix shifts the fields along

If one layer is joined to another and no prefix is selected (by selecting custom field name prefix and then just blan... Dan Isaacs

11:29 AM Bug report #18764 (Closed): Raster calculator (native and SAGA) not usable in Processing Modeller

While both raster calculators works fine when used in Processing, within a modeler both fail even with one single lay... matteo ghetta

11:18 AM Bug report #18198 (Closed): Gdal Help button in Processing gives annoying error

works fine now matteo ghetta

11:12 AM Bug report #18363: Missing dependencies in Kubuntu 16.04 and KDE Neon

on Ubuntu:18.04 qgis3[ debian-nightly + debian] - I have similar QT5 problem.... Imre Samu

10:52 AM Bug report #18763 (Closed): BUG round function crash

round(0+y(centroid( $geometry )),2) || ' '|| round(x(centroid( $geometry )) ,2) - work OK : 5869069.18 2313414.94... Andrew Shanin

10:41 AM Bug report #18762 (Rejected): Raster > Conversion > Rasterize error

The GDAL Rasterize processing tool is not converting the 'Width/Horizontal resolution' entered value to the two-part ... Paul Day

09:57 AM Feature request #18761 (Open): Add a "Apply page size to other pages" button to page item properties

Use case: let's say you have a multipage A4 layout (for an atlas eg) and realize at some point that you should instea... Harrissou Santanna

09:09 AM Bug report #18760 (Open): DXF export loses symbol and point heights

two cases has been tried:
when exporting the whole view with file->dxf export all point the points and symbols get... Kepes Ádám

07:39 AM Feature request #17816 (Feedback): Conditional formatting is not displayed in an Attribute Table ...

Hi Etienne,
Should this not be a feature request, instead? Harrissou Santanna

07:37 AM Bug report #17908 (Feedback): It doesn't open

Is it still the case with newer builds (ie, 3.1)? Harrissou Santanna

07:20 AM Bug report #18548: QGIS 3.0.1 crash on startup

> same as #18260?
I can see that the crash report is a little different (i don't know if it's relevant though) Harrissou Santanna

07:16 AM Bug report #18570 (Closed): QGIS 3.0.1 crash on startup

Closing as it duplicates #18548 (Better focus on a single report). Harrissou Santanna

07:16 AM Bug report #18570 (Closed): QGIS 3.0.1 crash on startup

Closing as it duplicates #18548 (Better focus on a single report). Harrissou Santanna

07:04 AM Bug report #18557: Layout Setup of Page not working

I think the "Page setup" is for direct print paper size. Harrissou Santanna

06:34 AM Bug report #14978 (Closed): Join attributes in Processing works in a slightly different way compa...

Fixed in 3 - the join algorithm allows manual selection of fields to include Nyall Dawson

06:34 AM Bug report #14978 (Closed): Join attributes in Processing works in a slightly different way compa...

Fixed in 3 - the join algorithm allows manual selection of fields to include Nyall Dawson

06:33 AM Feature request #15261 (Closed): Add multiple column selection to Processing/OGR tools

PR was merged Nyall Dawson

06:33 AM Feature request #15261 (Closed): Add multiple column selection to Processing/OGR tools

PR was merged Nyall Dawson

06:31 AM Feature request #17380 (Closed): Add sort option to processing "incremental field" algorithm

Fixed in 3.2 Nyall Dawson

06:31 AM Feature request #17380 (Closed): Add sort option to processing "incremental field" algorithm

Fixed in 3.2 Nyall Dawson

06:29 AM Bug report #17586 (Closed): Intersects from Select by Location not working for points/lines when ...

Fixed in 3.0.2 Nyall Dawson

06:29 AM Bug report #17586 (Closed): Intersects from Select by Location not working for points/lines when ...

Fixed in 3.0.2 Nyall Dawson

2018-04-18

01:17 AM Feature request #17677: Ability to place labels below features

BTW MapInfo had this feature from earlier versions. Nikolay Lebedev

01:13 AM Bug report #18713: Virtual layer with spaces in layer name not created

Virtual layer is being chosen from layer list and doesn't have quotes by default. Check button returns an error (see ... Nikolay Lebedev

10:56 PM Bug report #18759 (Feedback): QGIS Crash when setting South Africa Lo and kml layers (wgs84)

Nyall Dawson

10:56 PM Bug report #18759: QGIS Crash when setting South Africa Lo and kml layers (wgs84)

Can you share data and the epsg code? Nyall Dawson

09:57 PM Bug report #18759 (Closed): QGIS Crash when setting South Africa Lo and kml layers (wgs84)

h2. User Feedback
trying to use ZA projection with kml files (wgs84)
h2. Report Details
*Crash ID*: 90cda499... Paulo Cardoso

09:18 PM Bug report #18756 (Rejected): crash opening a map with UTF-8 character type

This bug is in the qgis cloud plugin and needs to be filed with that plugin's author. Nyall Dawson

09:18 PM Bug report #18756 (Rejected): crash opening a map with UTF-8 character type

This bug is in the qgis cloud plugin and needs to be filed with that plugin's author. Nyall Dawson

06:26 PM Bug report #18756 (Rejected): crash opening a map with UTF-8 character type

Using a layer I noticed that the characters in the attribute table display incorrectly, so I set the character type f... Alden Nascimento

08:57 PM Bug report #18758 (Open): QGIS3: mysteric QByteArray display in dvanced Settings Editor

Experienced on QGIS3, GIT build 6e3d879544, OSGeo4W 64-bit.
settings > options > advanced (Advanced Settings Edito... Tobias Wendorff

08:14 PM Bug report #18757 (Open): WFS SQL Query Composer

When I attempt to create an SQL query for a WFS layer the text in the SQL statement box is scrunched together and I c... Eric Berkowitz

05:18 PM Feature request #18755 (Closed): Embedded forms with n:m relations: delete action should ask for ...

It would be good if the relation reference widget (in embedded form mode) could ask for confirmation, prior to deleti... Andreas Neumann

04:51 PM Bug report #18290 (Closed): Embedded form (relation) disappears when changing configuration of a ...

Seems to work fine now. Closing the issue. Andreas Neumann

04:51 PM Bug report #18290 (Closed): Embedded form (relation) disappears when changing configuration of a ...

Seems to work fine now. Closing the issue. Andreas Neumann

04:41 PM Bug report #18754 (Closed): Embedded form: data stays in form when last feature in relation is re...

In an embedded form of a n:m relation - if one deletes the last linked feature (with Delete Feature), the data of the... Andreas Neumann

03:38 PM Feature request #15589 (Closed): Duplicate record function

is now available in QGIS 3.x Andreas Neumann

03:38 PM Feature request #15589 (Closed): Duplicate record function

is now available in QGIS 3.x Andreas Neumann

12:08 PM Feature request #15589 (Feedback): Duplicate record function

@Andreas, is this fixed with https://github.com/qgis/QGIS/pull/5925 or https://github.com/qgis/QGIS/pull/5922? Harrissou Santanna

03:36 PM Bug report #18753 (Feedback): QGIS crashed

h2. User Feedback
QGIS crashed overnight.
It was last seen displaying about 12 layers of mostly SHP files on an... Craig Allan

02:55 PM Bug report #17315: 3D Viewer: QGIS Crash when activating 3D Map view and 3D renderer

This now seems to work with version 3.0.1-Girona. At least, upgrading to this version solved the problem I reported i... Umberto Minora

02:37 PM Bug report #18748: gdal rasterize error

I see, I messed up some configuration, sorry. What do you think to add a warning (or even set some default values) fo... matteo ghetta

02:13 PM Bug report #18748 (Feedback): gdal rasterize error

Not reproducible on latest master under Linux and Windows. Everything works fine with several different layers.
Lo... Alexander Bruy

02:13 PM Bug report #18748 (Feedback): gdal rasterize error

Not reproducible on latest master under Linux and Windows. Everything works fine with several different layers.
Lo... Alexander Bruy

02:13 PM Bug report #18748 (Feedback): gdal rasterize error

Not reproducible on latest master under Linux and Windows. Everything works fine with several different layers.
Lo... Alexander Bruy

01:59 PM Bug report #18748 (Closed): gdal rasterize error

when running gdal rasterize the algorithm stops with this error:
ERROR 1: Wrong value for -outsize parameter.
s... matteo ghetta

02:31 PM Feature request #18752 (Open): Implement a Command Palette into QGis

Hi maintainers, and thank you for this outstanding software.
Although not new to map making, I am more of a website ... Stephen Sinclair

02:27 PM Bug report #18751 (Closed): SAGA raster calculator additional layer is not treated as optional

When performing a calculation on just one single raster layer the following error shows up:... matteo ghetta

02:17 PM Bug report #18750 (Closed): Reclassify grid values in SAGA broken

This the error in the log file:... matteo ghetta

02:16 PM Bug report #18749 (Closed): 3.0.1-Girona crashes when Adding ArcGIS Feature Layer

It figures, I go to the trouble to submit a bug report...and now it is working.
Jay Cummins

02:12 PM Bug report #18749 (Closed): 3.0.1-Girona crashes when Adding ArcGIS Feature Layer

h2. User Feedback
I was attempting to add layers from a Feature Service. The initial connection to the service an... Jay Cummins

01:19 PM Bug report #15440: QGIS Server: GetPrint crashes on Windows when there are advanced elements (i....

After some discussion with one of the main QGIS Server developers (Alessandro) I updated the description. Giovanni Manghi

01:18 PM Bug report #18747 (Rejected): QGIS Server GetPrint issue on Desktop Linux installations

This may or *may not* be related to #15440
At some point in 2.18 development it seems that QGIS Server, in the con... Giovanni Manghi

12:28 PM Feature request #12698 (Closed): Add "crop" function to Printing layout

Harrissou Santanna

12:26 PM Feature request #10036 (Feedback): lock scale and extents in composer

Isn't this a duplicate of #3865? One may be worth closed... Harrissou Santanna

12:04 PM Feature request #10556 (Feedback): Legend and scale bar - do not refresh the size of the box

Can we consider this as fixed (legend has a resize option and scale bar has fit segment option)? Harrissou Santanna

12:04 PM Feature request #10556 (Feedback): Legend and scale bar - do not refresh the size of the box

Can we consider this as fixed (legend has a resize option and scale bar has fit segment option)? Harrissou Santanna

12:01 PM Feature request #7775 (Feedback): Add option to see feature count by default

@Giovanni, you mean something different to the right-click > Show Feature Count? Harrissou Santanna

11:28 AM Feature request #8505 (Feedback): Add option to suppress feature form for new features to project...

This feature is available in the layer properties dialog : 2.x (bottom of the Fields tab) and in 3.x (top right of th... Harrissou Santanna

11:28 AM Feature request #8505 (Feedback): Add option to suppress feature form for new features to project...

This feature is available in the layer properties dialog : 2.x (bottom of the Fields tab) and in 3.x (top right of th... Harrissou Santanna

11:12 AM Bug report #18746 (Closed): QGIS 3 crashed

Following instructions on the ":( QGIS Crashed" dialog, the crash report is attached...
Occurred when trying to remo... Benoit de Cabissole

10:08 AM Bug report #17525 (Closed): subform in automatic generated relation referende widget is not visib...

Applied in changeset commit:qgis|84ec10eeb86edf14af518339f8167b8bac7f894a. Anonymous

10:08 AM Bug report #17525 (Closed): subform in automatic generated relation referende widget is not visib...

Applied in changeset commit:qgis|84ec10eeb86edf14af518339f8167b8bac7f894a. Anonymous

08:36 AM Bug report #18745 (Open): Move labels on rotated view

It is not possible to move or rotate labels on a rotated view because the label pin boxes are not rotated accordingly... Johannes Metzler

08:19 AM Bug report #18737: GRASS error when parameter is "pick coordinate" type

It seems only Windows related, here the complete log of Processing:... matteo ghetta

07:41 AM Bug report #18744 (Closed): text export

DXF Export in 3.0.1 is not handling text as in 2.14
rotaions/positions are not traslateted properly, in some cases t... Johannes Metzler

04:10 AM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.

Should be fixed in http://github.com/qgis/QGIS/pull/4390 Harrissou Santanna

04:10 AM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.

Should be fixed in http://github.com/qgis/QGIS/pull/4390 Harrissou Santanna

04:10 AM Feature request #9338 (Closed): Allow to select size of export image in Project > Save as Image.

Should be fixed in http://github.com/qgis/QGIS/pull/4390 Harrissou Santanna

03:30 AM Feature request #8226 (Feedback): Provide export settings ability

Is this possible now? Harrissou Santanna

03:30 AM Feature request #8226 (Feedback): Provide export settings ability

Is this possible now? Harrissou Santanna

03:27 AM Feature request #7975 (Feedback): Meaning of scale field not explained in Print Composer

Close? Harrissou Santanna

03:27 AM Feature request #7975 (Feedback): Meaning of scale field not explained in Print Composer

Close? Harrissou Santanna

03:23 AM Feature request #7813 (Feedback): QGIS Blend Mode - Cut

Close? Harrissou Santanna

03:23 AM Feature request #7813 (Feedback): QGIS Blend Mode - Cut

Close? Harrissou Santanna

2018-04-17

10:28 PM Bug report #18743 (Feedback): Vector / Geometry tools / lines to Polygons

Is this also an issue in 3.0? Nyall Dawson

09:37 PM Bug report #18743 (Closed): Vector / Geometry tools / lines to Polygons

The GUI "lines to polygons" calls "polygons to lines" process.
When a layer with linestring geometry is selected as... olivier gaquiere

08:40 PM Bug report #18363: Missing dependencies in Kubuntu 16.04 and KDE Neon

Same problem here. I even tried the "build your own set of packages" option linked to at qgis.org/en/site/forusers/a... Jason Paul Joines

08:26 PM Bug report #18732: Crash when closing QGIS

Other log from identical crash
Crash ID: 343a3fb6096cb1965ad4055a0e4b7e6e18c3bbf4
Stack Trace
QListData:... Antoine Lafranchis

06:56 PM Bug report #18742 (Closed): [Layout] In multisize pages layout, exporting to PDF does not behave ...

Create a 2 pages layout (first page A4, the other A3)
Add items on them
Export the layout to PDF: you get a PDF wit... Harrissou Santanna

05:56 PM Bug report #18741: No TIFF image encoding radio button for WMS

WMS service: https://erma.noaa.gov/maps/wms/37806 dr -

05:55 PM Bug report #18741 (Open): No TIFF image encoding radio button for WMS

No TIFF image encoding radio button amongst supported formats for WMS layer.
Ubuntu 16.04 (latest ubuntugis-nightl... dr -

05:51 PM Feature request #10024: Drag and Drop CSV file

From http://www.gdal.org/drv_csv.html
> "Starting with GDAL 2.1, it is possible to directly specify the potential ... Andy Harfoot

03:44 PM Bug report #18740 (Closed): is a WFS layer is large enough then identifying a feature in QGIS wit...

This happens regardless the server used (I tested QGIS Server and Mapserver).
If you load one of those WFS layers ... Giovanni Manghi

03:42 PM Bug report #18739 (Closed): QGIS Server: GML invalid, loss of data

In this service
http://www.naturalgis.pt/cgi-bin/opendata/qgis_mapserv.fcgi?service=WFS&request=GetCapabilities
t... Giovanni Manghi

01:59 PM Feature request #18738 (Open): Very slow geometry/topology fix

The "fix with default action" function of the Geometry checker is very slow for large shapefiles (6500 polygons). App... Antoine Lafranchis

01:33 PM Bug report #18737 (Closed): GRASS error when parameter is "pick coordinate" type

in algorithms as r.drain, r.viewshed when choosing the coordinates from the map with the "pick coordinate" tool, the ... matteo ghetta

01:14 PM Bug report #18736 (Closed): Crash when aborting geometry check

h2. User Feedback
I clicked Abort on a geometry check
h2. Report Details
*Crash ID*: 9bd4be657063fe6452ffb95... Antoine Lafranchis

11:02 AM Bug report #18702: Save map image

Sorry I can't Andrew Shanin

11:00 AM Bug report #18735 (Open): saving uint16 layer to netCDF crashed

Import a Geotiff file as Uint16 Format, and save the layer to NetCDF, QGIS crashes everytime.
========= crash... nuitlejour nuitlejour

10:46 AM Bug report #18734 (Closed): Matrix parameter can not be used in the Graphical Modeler

There is a Matrix parameter in the Graphical Modeler, but it does not allow to perform any configuration and can not ... Alexander Bruy

10:10 AM Bug report #17138: wrong SRS identification of shapefile

Robert Nuske wrote:
>
> As far as i understood the only difference between 25832 and 3044 should be the axis orderi... Tobias Wendorff

09:58 AM Bug report #17138: wrong SRS identification of shapefile

Having imported data with CRS 25832, which gets magnled to 3044 by QGIS,
one has to pay close attention to switch th... Robert Nuske

2018-04-16

01:26 AM Bug report #18733 (Closed): Legend not matching map with "lock style for layers" option

Steps to reproduce
1: Create a project with some polygons and a make a new layout.
2: In the layout editor, add a m... Antoine Lafranchis

12:24 AM Bug report #18732 (Closed): Crash when closing QGIS

h2. User Feedback
I just closed QGIS. Project was already saved. It happened all 3 times since I installed v3.0.1.... Antoine Lafranchis

10:16 PM Bug report #18731 (Open): [Layouts] Removing a page of the layout moves its content to first page...

Select a multi page layout with items added here and there.
Select page two, right-click… remove page
The page is ... Harrissou Santanna

09:55 PM Bug report #18679: Cannot insert decimal separator to field

I don't how or whether this is linked (sorry if it is not) but in another context, i have issues with dot being recog... Harrissou Santanna

05:51 PM Bug report #18679: Cannot insert decimal separator to field

Sorry: I tested this again but I wasn't able to reproduce it on Linux with latest master: I also have "," as a decima... Alessandro Pasotti

05:51 PM Bug report #18679: Cannot insert decimal separator to field

Sorry: I tested this again but I wasn't able to reproduce it on Linux with latest master: I also have "," as a decima... Alessandro Pasotti

08:47 PM Bug report #18730 (Closed): GRASS Batch Processing - v.distance

Hi,
I want to repport a non fonctional Batch Processing for the GRASS fonction v.distance.
It only calculate the... Sarane Sterckx

06:58 PM Bug report #18711 (Closed): Unit change when saving style in database

Saber Razmjooei

06:31 PM Bug report #15215 (Closed): Cannot set value to NULL in value map

Applied in changeset commit:qgis|73f7bd3e8bb9361ea72fc6035564db5c9d54d1c1. Daan Goedkoop

06:31 PM Bug report #15215 (Closed): Cannot set value to NULL in value map

Applied in changeset commit:qgis|73f7bd3e8bb9361ea72fc6035564db5c9d54d1c1. Daan Goedkoop

05:32 PM Bug report #18729 (Open): [Layout] Locking map item xmin/ymin with data-defined button is not tak...

_Use case: I have a map item i exported and used in a graphic editor software; but the extent used is not enough so I... Harrissou Santanna

03:37 PM Feature request #4900 (Feedback): Have 1 (non-hidden) QGIS folder with a fixed set of subdirs for...

Richard, Is this still valid?
Does the "Layout paths" section in settings --> Options --> Layouts (as well as the se... Harrissou Santanna

03:37 PM Feature request #4900 (Feedback): Have 1 (non-hidden) QGIS folder with a fixed set of subdirs for...

Richard, Is this still valid?
Does the "Layout paths" section in settings --> Options --> Layouts (as well as the se... Harrissou Santanna

03:32 PM Bug report #11897 (Feedback): In Print composer, menu Setting should open only Composer options

Cannot reproduce with 3.0-rel-dev nor master(3.1) on windows.
Can you confirm, Paolo? Harrissou Santanna

02:06 PM Bug report #18720: QGIS 3.0.1 crashes on Mac

I have the same problem; have tried uninstalling and reinstalling all GIS libraries, and updating to 3.0.1_20180410. ... Chris Mutel

12:21 PM Feature request #12689: Add option for "Save as Image" to create a georeferenced file

@Nyall, correct me if i'm wrong but isn't this fixed in commit:bae8a0e5e0b8b86f5eeed94c323a4fffac846c46 (or I misunde... Harrissou Santanna

11:41 AM Bug report #17854 (Closed): View form with relations does not work

Duplicate of #17525 Nyall Dawson

11:41 AM Bug report #17854 (Closed): View form with relations does not work

Duplicate of #17525 Nyall Dawson

09:46 AM Bug report #18649: Crash on startup on Debian Stretch

Attaching a log of an attempt with latest nightly (nothing new, just the addresses and times change but I realized th... Jérôme L

09:19 AM Bug report #18728: All image format except TIF, lay on map with dispasment and errors

Problem have with world files too: for bmp, jpg, png.
Andrew Shanin

09:00 AM Bug report #18728 (Closed): All image format except TIF, lay on map with dispasment and errors

Just check it out.
See appendix Andrew Shanin

07:10 AM Bug report #18727 (Closed): Save As kml crashes with sybology

Fixed in 3.0.2 Nyall Dawson

07:10 AM Bug report #18727 (Closed): Save As kml crashes with sybology

Fixed in 3.0.2 Nyall Dawson

06:35 AM Bug report #18727 (Closed): Save As kml crashes with sybology

Saving an object, imported to QGis as a delimited text file, as a kml causes QGis to crash if anything other than No ... Kim Frankcombe

2018-04-15

11:30 PM Bug report #18726 (Closed): geopackage: real values displayed wrong in table

1. create a new geopackage layer with an attribute of type "real"
2. insert some point with decimal value
3. open ... Luca Lanteri

10:42 PM Bug report #18132 (Closed): Dpi resolution of images exported from composer is wrong

Nyall Dawson

01:20 PM Bug report #18132: Dpi resolution of images exported from composer is wrong

Pull request https://github.com/qgis/QGIS/pull/6524 with commit that fixes the bug
Applied in changeset commit:qgis|... Andrea Giudiceandrea

07:04 PM Feature request #4212: Data types for csv

This is a problem that comes up all the time when dealing with users from data analysis, journalism and similar backg... Johannes Kroeger

11:33 AM Feature request #5606: Defining column types for CSV imports

Ultimately this is a dupe of #4212 Johannes Kroeger

11:33 AM Feature request #13038: Add ability to choose field type in CSV plugin provider import

This is a dupe of #4212 and #5606 Johannes Kroeger

11:27 AM Bug report #18725 (Closed): Rotated vector grid lost in QGIS 2.18

In QGIS 2.14, the ftools plugin provided the ability to create a rotated vector grid.
This option was not moved to... Andre Joost

11:12 AM Bug report #18724 (Closed): GRASS 7 r.viewshed fails

Fixed in master, will be included on 3.0.2 Nyall Dawson

11:12 AM Bug report #18724 (Closed): GRASS 7 r.viewshed fails

Fixed in master, will be included on 3.0.2 Nyall Dawson

09:12 AM Bug report #18724 (Closed): GRASS 7 r.viewshed fails

Testing QGIS 3.0, KyngChaos QGIS 3.0.0-3 (because MacPorts QGIS 3.1 crashes under OSX))
Have DEM and using GRASS ... Garth Fletcher

2018-04-14

11:07 PM Bug report #18045 (Closed): Python function for expression is not loaded automaticaly

Nyall Dawson

01:37 PM Bug report #18045: Python function for expression is not loaded automaticaly

You need to press the load button to reload the function after reediting it!
It's in the "Function editor" window, o... Tudor Bărăscu

11:07 PM Bug report #18723 (Closed): Adding a new function expression that also prints in the console halt...

This isn't safe to do - better to use the thread safe qgis logger classes, e.g. QgsLogger, QgsMessageLog Nyall Dawson

11:07 PM Bug report #18723 (Closed): Adding a new function expression that also prints in the console halt...

This isn't safe to do - better to use the thread safe qgis logger classes, e.g. QgsLogger, QgsMessageLog Nyall Dawson

02:16 PM Bug report #18723 (Closed): Adding a new function expression that also prints in the console halt...

I have a point layer with 3 points.
I created the following function:... Tudor Bărăscu

03:44 PM Bug report #18457: Relationship one_to_many

in qgis 3 :
i have this problem too
my layer and table are stored in postgis
this feature had worked well in prev ... nagi hekmati

03:38 PM Bug report #17525: subform in automatic generated relation referende widget is not visible in 2.9...

in qgis 3 :
i have this problem too
my layer and table are stored in postgis
this feature had worked well in prev ... nagi hekmati

02:12 PM Bug report #18658: PyQGIS Developer Cookbook and the modules

Hi, the cookbook is not fully updated to QGIS 3. The effort of updating it is made by volunteers so.. you'll just hav... Tudor Bărăscu

10:32 AM Bug report #18597: Layer reprojection from EPSG:3844 to EPSG:4326 has offset since QGIS 2.18.8

(give it a try, if you want:)
- Download the polyline shapefile of Romania’s national boundary (Frontieră România po... L Sz

10:06 AM Bug report #18722 (Closed): crash when i trying to load a wfs layer

h2. User Feedback
trying to load a wfs layer
h2. Report Details
*Crash ID*: 8886fa07fa66259dfaea3ebce46f7f... Raúl Vigueras

06:32 AM Bug report #18302: QGIS2+: values shown in scientific notation

On some places it has been fixed, on many it hasn't. See attachment.
I'm on QGIS3, GIT build af8d9eb1a6 Tobias Wendorff

06:29 AM Bug report #18601: QGIS3: texts with leading zero get integers

Could a mod please edit my first post? Actually, it is destroying data. I missed to add this. Tobias Wendorff

2018-04-13

10:47 PM Bug report #18649: Crash on startup on Debian Stretch

I just tried on another machine. It is a Debian Stretch as well, although this one is not a virtual machine.
I ins... Jérôme L

07:38 PM Bug report #18721 (Closed): Menus

Hello,
I've been a user of QGIS for geologic mapping purposes for a few years now. Recently I've switched my prima... Zachariah Fleming

07:03 PM Bug report #18720 (Closed): QGIS 3.0.1 crashes on Mac

I have installed QGIS 3.0.1 on my mac using Macports. Since upgrading to 3.0.1 it crashes any time I try to open a f... Adam Dershowitz

05:36 PM Bug report #18719 (Feedback): Missing options in GPS Information Panel

Missing the Polar Graphic of Satellites and the button of internal gps option.
See attachment:
Left image -> QGI... João Gaspar

04:37 PM Bug report #18718 (Open): Extra line feed in table using "Wrap text"

- Insert a table in composer
- Set fixed size for a text column
- Set Oversized text properties to "Wrap text"
T... Luca Lanteri

11:55 AM Bug report #17331: new node tool topological editing

same reported in #18192 and #18046 Jakub Kosik

10:00 AM Bug report #18679: Cannot insert decimal separator to field

There are screenshots of my system settings, QGIS settings, Layer definition and its Feature form where i try to put ... David Pavlicek

10:00 AM Bug report #18679: Cannot insert decimal separator to field

There are screenshots of my system settings, QGIS settings, Layer definition and its Feature form where i try to put ... David Pavlicek

10:00 AM Bug report #18679: Cannot insert decimal separator to field

There are screenshots of my system settings, QGIS settings, Layer definition and its Feature form where i try to put ... David Pavlicek

10:00 AM Bug report #18679: Cannot insert decimal separator to field

There are screenshots of my system settings, QGIS settings, Layer definition and its Feature form where i try to put ... David Pavlicek

08:51 AM Bug report #18679: Cannot insert decimal separator to field

Thanks for the feedback,
So, basically, the problem looks like that the default editor widget for numeric does not... Alessandro Pasotti

08:45 AM Bug report #18679: Cannot insert decimal separator to field

I have tested this against latest nightly build from OSGeo (3.1.0-master 4c8b1595a9) with same results...
BUT, af... David Pavlicek

07:16 AM Bug report #18717 (Feedback): Crashes when digitising shp files

h2. User Feedback
Editing shp file
h2. Report Details
*Crash ID*: ee8ccc8a9144e3c72737ee26b4f351cca85a3bf3
... Damien Smith

02:59 AM Bug report #18716 (Closed): Crash when using a geopackage and clicked on float selected record to...

h2. User Feedback
I reduced the number of visible fields in the attribute table using the dialog. I then selected... Andrew Mitchell

2018-04-12

01:55 AM Bug report #18691 (Closed): Triggering atlas preview needlessly refreshes map canvas

Actually this is intentional - it's so that any symbology rules which are dependent on atlas feature are correctly ap... Nyall Dawson

01:55 AM Bug report #18691 (Closed): Triggering atlas preview needlessly refreshes map canvas

Actually this is intentional - it's so that any symbology rules which are dependent on atlas feature are correctly ap... Nyall Dawson

10:50 PM Feature request #18715 (Closed): netcdf browser

Nyall Dawson

07:16 PM Feature request #18715: netcdf browser

Plugins are maintained by the community. Please ask the NetCDF Browser's author if he's interested in upgrading it. I... Borys Jurgiel

05:33 PM Feature request #18715 (Closed): netcdf browser

Please quickly upgrade netcdf browser or build another plugin to load netcdf files in version 3 Abou Sarr

10:50 PM Bug report #18155 (Closed): ImportError: QtWebEngineWidgets must be imported before a QCoreApplic...

Actually qt upstream backtracked on the decision to deprecate the WebKit classes (hooray!), which is a great thing be... Nyall Dawson

10:50 PM Bug report #18155 (Closed): ImportError: QtWebEngineWidgets must be imported before a QCoreApplic...

Actually qt upstream backtracked on the decision to deprecate the WebKit classes (hooray!), which is a great thing be... Nyall Dawson

08:48 PM Bug report #18155: ImportError: QtWebEngineWidgets must be imported before a QCoreApplication ins...

Nyall Dawson wrote:
> Use QWebPage/QWebFrame/QWebView instead of QWebEngine
Thank you Nyall, guess I reported too... Daniel Sánchez Pillot Gutiérrez

03:47 PM Bug report #18712 (Closed): Relative path for projects is broken

Saber Razmjooei

10:55 AM Bug report #17809: Rendering performance issues

I did some research with Saber's and my projects: Both run smoothly when stored on a local path. However when loaded ... mr twister

10:41 AM Bug report #18521 (Closed): Conditional formatting rules do not apply to relation reference widge...

Applied in changeset commit:qgis|4d984793e91f7429b38a8af90d741e25d6834f5a. David Signer

10:41 AM Bug report #18521 (Closed): Conditional formatting rules do not apply to relation reference widge...

Applied in changeset commit:qgis|4d984793e91f7429b38a8af90d741e25d6834f5a. David Signer

07:05 AM Bug report #17851: Top or bottom context menu item is selected and clicked when right clicking a ...

My testing leads me to conclude this is application specific rather than a particular desktop environment for Linux.
... Patrick Dunford

06:57 AM Bug report #18692: Layer list problems with ordering layers

I tested with XFCE against KDE. Ultimately, there was no difference found between the two desktop environments, and c... Patrick Dunford

2018-04-11

01:56 AM Bug report #18155: ImportError: QtWebEngineWidgets must be imported before a QCoreApplication ins...

Use QWebPage/QWebFrame/QWebView instead of QWebEngine Nyall Dawson

12:34 AM Bug report #18155: ImportError: QtWebEngineWidgets must be imported before a QCoreApplication ins...

I'm getting the same error when trying to import the QWebEngineView. For what I understand QtwebEngineWidgets can't b... Daniel Sánchez Pillot Gutiérrez

01:55 AM Bug report #18713 (Feedback): Virtual layer with spaces in layer name not created

No error here - are you enclosing the table name in double quotes? Can you post more info? Nyall Dawson

01:06 AM Bug report #18713 (Open): Virtual layer with spaces in layer name not created

If you try to create a virtual layer from existing project layer that has spaces in layer name (like “My layer”) you'... Nikolay Lebedev

01:12 AM Bug report #18714 (Open): QGIS crashes when opening a project having joined layers with spaces in...

Steps to reproduce:
Add two layers to the project.
Add a space in layer name for one layer (i.e. "my layer").
Join... Nikolay Lebedev

11:47 PM Bug report #18696 (Closed): libdxfrw doesn’t honor the "DEBUG" flag

Fixed in commit:222e45b838ebf8a2df43c6ef888047182fba5cb2 Jürgen Fischer

11:47 PM Bug report #18696 (Closed): libdxfrw doesn’t honor the "DEBUG" flag

Fixed in commit:222e45b838ebf8a2df43c6ef888047182fba5cb2 Jürgen Fischer

11:47 PM Bug report #18698 (Closed): qgsgml.cpp and gdal 2.4.4 incompatibility? (DEBUG build)

Fixed in commit:222e45b838ebf8a2df43c6ef888047182fba5cb2 Jürgen Fischer

11:47 PM Bug report #18698 (Closed): qgsgml.cpp and gdal 2.4.4 incompatibility? (DEBUG build)

Fixed in commit:222e45b838ebf8a2df43c6ef888047182fba5cb2 Jürgen Fischer

10:59 PM Bug report #18709 (Closed): Installation of QGIS-Server 2.14 on Debian 9.1/stretch

Jürgen Fischer

05:13 PM Bug report #18709: Installation of QGIS-Server 2.14 on Debian 9.1/stretch

2.14 is no longer supported by qgis.org. Try 2.18 (LTR) or 3.0 (see "Debian/Ubuntu":https://qgis.org/en/site/foruser... Jürgen Fischer

04:31 PM Bug report #18709 (Closed): Installation of QGIS-Server 2.14 on Debian 9.1/stretch

Hello everyone, I start with the use of QGIS-server, I am on debian 9.1 (stretch), and I need to use lizmap with. Dur... miadana joy

09:03 PM Bug report #18703 (Closed): QGIS will not complete rendering zoomed-out labels

Nyall Dawson

07:02 PM Bug report #18703: QGIS will not complete rendering zoomed-out labels

I can confirm that it is not a problem on 3.01 for Linux, not sure how to test 3.01 on OSX. Dewey Dunnington

07:39 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

No problem with a Load button that doesn't exist, provided that there is a way to change from a manually entered min/... Dewey Dunnington

07:30 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

ok, got it.
The load button is gone.
Apparently by design:
commit 407991ed35049ec267c4641751841b4631f9c05e
A... Alessandro Pasotti

06:56 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

This is not an OSX issue, this is a QGIS 3 issue. Updating the min/max values manually will automatically change the ... Dewey Dunnington

06:56 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

This is not an OSX issue, this is a QGIS 3 issue. Updating the min/max values manually will automatically change the ... Dewey Dunnington

03:05 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

Small update testing on Linux, if I manually change Min or Max values this is what happens:
- User defined is auto... Alessandro Pasotti

02:25 PM Bug report #18705: Updating raster single-band min/max method does not update actual min/max

Can you please check how (and if) it was working in 2.x?
If this is a regression introduced in 3.x, please flag it... Alessandro Pasotti

06:27 PM Bug report #18712 (Closed): Relative path for projects is broken

Relative path is broken and it saves all layers with their absoloute paths. Saber Razmjooei

06:22 PM Bug report #18711 (Closed): Unit change when saving style in database

If I try to set my styles using Map Units and save it in a database as default style (tested in geopackage), when loa... Saber Razmjooei

06:02 PM Bug report #18710 (Closed): SAGA Kriging defaults wrong and missing options

When using any of the Kriging functions The default Max Distance is set to -1.000, which creates layers made up of Na... Nicole Morgan

03:31 PM Bug report #18679 (Feedback): Cannot insert decimal separator to field

I cannot reproduce in current master, would you be able to test a nightly build?
If that still does not work, plea... Alessandro Pasotti

03:31 PM Bug report #18679 (Feedback): Cannot insert decimal separator to field

I cannot reproduce in current master, would you be able to test a nightly build?
If that still does not work, plea... Alessandro Pasotti

03:07 PM Bug report #18702 (Feedback): Save map image

Can you please add a step-by-step procedure and example QGIS project+data to reproduce the crash? Alessandro Pasotti

02:45 PM Bug report #18708 (Closed): GPS Info

The GPSInfo box doesn't see my usb-com3 port (QGIS 3.0)
Was OK with QGIS 2.12 Martin Fafard

02:10 PM Bug report #18700: QGIS crash removing table from Layers

Can you please attach a minimal QGIS project and data to reproduce the issue? Alessandro Pasotti

11:59 AM Bug report #18687 (Closed): Duplicate features: attribute values with boolean data types are not ...

Found out that this has nothing to do with "boolean" data types, but rather the fact that these attributes had defaul... Andreas Neumann

11:59 AM Bug report #18687 (Closed): Duplicate features: attribute values with boolean data types are not ...

Found out that this has nothing to do with "boolean" data types, but rather the fact that these attributes had defaul... Andreas Neumann

11:34 AM Bug report #18422: Data Source Manager window not vertically-resizable

Hey guys, I am having identical issue with symbol selector window. Toshiba Satellite laptop 1366 X 768 screen res. OS... Patrick Connellan

08:31 AM Bug report #18302: QGIS2+: values shown in scientific notation

I currently have the issue that QGIS 2.18.18 displays an ID as 1385998 (Identify Tool) whereas QGIS 3.0.1 shows that ... Andreas Wicht

2018-04-10

10:39 PM Bug report #18703 (Feedback): QGIS will not complete rendering zoomed-out labels

This was likely fixed by a patch in 3.0.1. Can you upgrade and test? Nyall Dawson

09:12 PM Bug report #18703 (Closed): QGIS will not complete rendering zoomed-out labels

This particular issue occurs when rendering labels for contour lines, but may also affect other types of labels. The ... Dewey Dunnington

10:29 PM Bug report #18418: Scroll zoom erratic on Mac trackpad

Yes, I can confirm that the jump in scale only occurs with the Pan tool. With other tools, however, the other part of... Nathan Perry

10:04 PM Bug report #18418: Scroll zoom erratic on Mac trackpad

I only have this problem (map zooming out upon completing zoom with the trackpad) in OSX when on the "Pan" tool...whe... Dewey Dunnington

10:12 PM Bug report #18706 (Closed): QGIS 3 refuses to load on fresh OSGEO64 install on Windows 7 Pro

h2. User Feedback
after several times uninstalling and installing with osgeo4w-setup-x86_64, QGIS will not progres... Rob Willson

09:57 PM Bug report #18705 (Open): Updating raster single-band min/max method does not update actual min/max

When updating the min/max method for single band (pseudocolor and grayscale), updating the manual min/max values will... Dewey Dunnington

09:46 PM Bug report #18704 (Closed): No GDAL/GRASS functionality on OSX in QGIS3

I cannot get the processing toolbox GDAL or GRASS functions to work in QGIS3 on OSX. The error for GDAL functions is:... Dewey Dunnington

09:23 PM Bug report #18622: Mouse pointer displacement

I have noticed this as well. The Select, Zoom (in and out), and Digitizing (crosshairs) pointers are twice as big (is... Dewey Dunnington

08:32 PM Bug report #18702 (Closed): Save map image

Crash ID: e1815805c53fd4fc5dfa809539887b484b7310d7
Stack Trace
QWidgetPrivate::create_sys :
QWidget::creat... Andrew Shanin

06:54 PM Bug report #18701 (Open): [Layout] Scale bar fill colors should be disabled for "not a box style"...

In print layout, add a scale bar.
In its item properties panel, Fonts and colors group, the Fill and secondary fill ... Harrissou Santanna

06:12 PM Bug report #18700 (Open): QGIS crash removing table from Layers

h2. User Feedback
I had just removed a no-geometry csv table from the layers. The table was joined to another lay... Mike Bannister

06:00 PM Bug report #18698: qgsgml.cpp and gdal 2.4.4 incompatibility? (DEBUG build)

This is a DEBUG build, and it fails because of that line in ogr_api.h... vince -

05:13 PM Bug report #18698 (Closed): qgsgml.cpp and gdal 2.4.4 incompatibility? (DEBUG build)

When I try to compile QGIS master (commit c625f95) with the new version of gdal, I get this compilation error:
<pr... vince -

05:21 PM Bug report #18687: Duplicate features: attribute values with boolean data types are not duplicate...

I tried to replicate with a smaller example - but failed.
Perhaps there is something special in our project config... Andreas Neumann

02:29 PM Bug report #18687 (Closed): Duplicate features: attribute values with boolean data types are not ...

When "duplicating features with digitize", the attribute values of boolean values as "true" are not correctly duplica... Andreas Neumann

05:13 PM Bug report #18699 (Open): [Layout] Data-defined attribute table source layer does not update stru...

In a project let's add 3 layers: 'layerA', 'layerB', 'layerC'
In a Print layout, enable atlas generation on 'layerA'... Harrissou Santanna

05:10 PM Bug report #18697 (Open): [Layout] Data-defined attribute table source layer has some limitations

In a Print layout, Add an attribute table, and in its properties set 'layerA' as layer source
In the layer source da... Harrissou Santanna

05:08 PM Bug report #18696 (Closed): libdxfrw doesn’t honor the "DEBUG" flag

Libdxfrw uses DEBUG as a symbolic name for an enum, which causes a conflict when doing a DEBUG type build of Qgis.
T... vince -

05:07 PM Bug report #18695 (Open): [Layout] Attribute table: deactivating layer source dd button is revert...

In print layout, add an attribute table and use a working expression to set the layer source to use.
Then deactivate... Harrissou Santanna

05:06 PM Bug report #18694 (Closed): [Layout] Data-defined options not updated in items properties when mo...

I think the issue of DD buttons not being reset when moving from a picture item to another picture item (#18637) appl... Harrissou Santanna

04:50 PM Bug report #18678: System crash/logout with temp layer in Layers panel

Nyall Dawson wrote:
> Can't reproduce on Linux - may be another OSX specific issue
I believe there are known issu... Nathan Perry

06:33 AM Bug report #18678: System crash/logout with temp layer in Layers panel

Can't reproduce on Linux - may be another OSX specific issue Nyall Dawson

04:11 AM Bug report #18678 (Closed): System crash/logout with temp layer in Layers panel

When a temporary memory layer is present in the map legend (Layers panel), hovering the mouse over the temp layer's n... Nathan Perry

04:29 PM Feature request #18693 (Closed): include python3-pypiwin32 in windows standalone installer

hello jürgen,
would it be possible, that you include the python3-pypiwin32 site package in the qgis standalone ins... Jan Lippmann

04:19 PM Bug report #18692 (Closed): Layer list problems with ordering layers

Generally there are two issues noted with the layer list in Qgis 2.18:
1. Drag and drop of items where the trigger... Patrick Dunford

04:04 PM Bug report #18597: Layer reprojection from EPSG:3844 to EPSG:4326 has offset since QGIS 2.18.8

If you delete the .qpj files from your zip, create a custom CRS with the parameters from #1 and assign that to your 3... Andre Joost

03:38 PM Bug report #18691 (Closed): Triggering atlas preview needlessly refreshes map canvas

Open a project and add a layout
Place the layout dialog so that you can view the map canvas
Check in the print layo... Harrissou Santanna

03:25 PM Feature request #18690 (Open): GeoReferencer - set crop zone for referenced image.

Tool for cropping useless part of images. Andrew Shanin

03:19 PM Bug report #18689 (Closed): QGIS 3.0.1 crashes when zoomed to 1:2,721

Using OS VectorMap. When I zoom in to 1:2,721 QGIS crashes. I was trying to zoom to 1:2,000 and I identified this as ... Peter Brooks

03:05 PM Feature request #18688 (Closed): Add function Scale_View for Map Composer

Sometimes I need to show scale for View Window in text field.
For expample: Масштаб 1:[% Scale_View ("name of window... Andrew Shanin

02:21 PM Bug report #18686 (Open): [Layouts] Delete the map assigned to a scale bar item does not "invalid...

I don't quite know what would be the right behavior but...
Create a map item and an associated scale bar.
Now, dele... Harrissou Santanna

02:15 PM Bug report #18684 (Closed): inserting fields in expression generator uses double quotes instead o...

right, of course.
sorry for the noise Denis Rouzaud

02:15 PM Bug report #18684 (Closed): inserting fields in expression generator uses double quotes instead o...

right, of course.
sorry for the noise Denis Rouzaud

01:46 PM Bug report #18684: inserting fields in expression generator uses double quotes instead of simple ...

That's because it's adding the "object_id" attribute for the atlas feature, not the string literal 'object_id'. I.e. ... Nyall Dawson

01:40 PM Bug report #18684 (Closed): inserting fields in expression generator uses double quotes instead o...

In layout composer, in atlas, when adding a field for an expression as `attribute( @atlasfeature, 'myfield' )` myfiel... Denis Rouzaud

02:10 PM Bug report #18685 (Open): [Layout] Adding a scale bar before any map item makes it unusable

The title is a bit wrong but...
In a new print layout, add a scale bar, its "map" property is empty and it only show... Harrissou Santanna

12:01 PM Bug report #18683 (Open): Wrong argument references in aggregate function help

In the expression builder, select the aggregate function, the examples at the bottom of the help section use an *expr... Harrissou Santanna

11:44 AM Bug report #18671 (Closed): Can't export to tiff in layout composer

Nyall Dawson

10:00 AM Bug report #18671: Can't export to tiff in layout composer

That's the culprit...installed and everything is like is supposed to be!
I didn't have it installed...weird this d... Hugo Santos

11:34 AM Feature request #18682 (Closed): [Processing] Allow "select by attribute" algorithm output to alt...

"Select by location" and "select by expression" algorithms can alter current selection: add to current, remove from s... Harrissou Santanna

11:31 AM Feature request #18681 (Closed): [Processing] Allow "select by ..." algorithms to work with selec...

The "select by attribute", "select by expression" "select by location" (and maybe their random friends, but i'm not s... Harrissou Santanna

11:17 AM Bug report #18680 (Rejected): [Processing]"Contains" and "Does not contain" operators do no work ...

In select by attribute algorithm, trying to select features where _"gid" contains 1_ result in an error stating that ... Harrissou Santanna

10:37 AM Bug report #18679 (Closed): Cannot insert decimal separator to field

Hi, I have PostGIS based layer with numeric field. When i try to edit this field, it is not posible to insert (copy n... David Pavlicek

08:55 AM Bug report #18038 (Closed): Select by Location not working when data is in PostGIS

Applied in changeset commit:qgis|1357a4716ab14168c72a7ba1d41685f6dea11877. Nyall Dawson

08:55 AM Bug report #18038 (Closed): Select by Location not working when data is in PostGIS

Applied in changeset commit:qgis|1357a4716ab14168c72a7ba1d41685f6dea11877. Nyall Dawson

07:57 AM Bug report #18038: Select by Location not working when data is in PostGIS

https://github.com/qgis/QGIS/pull/6775 Nyall Dawson

07:53 AM Bug report #18038 (In Progress): Select by Location not working when data is in PostGIS

Nyall Dawson

03:09 AM Bug report #18038: Select by Location not working when data is in PostGIS

OK - finally got a file to upload. I had to use some stuff that wasn't client sensitive. The data was something I mad... Randal Hale

2018-04-09

12:47 AM Bug report #18671: Can't export to tiff in layout composer

Have you got the qt5-image-formats-plugins package installed? Nyall Dawson

09:44 PM Bug report #18671: Can't export to tiff in layout composer

Hi Nyall
I've tested in my machine at work and one of my home pc, both ubuntu based 16.04 (linux mint 18.3, haven'... Hugo Santos

09:44 PM Bug report #18671: Can't export to tiff in layout composer

Hi Nyall
I've tested in my machine at work and one of my home pc, both ubuntu based 16.04 (linux mint 18.3, haven'... Hugo Santos

09:24 PM Bug report #18671 (Feedback): Can't export to tiff in layout composer

Works fine here, and in multiple unit tests. You'll need to provide more info. Nyall Dawson

03:09 PM Bug report #18671 (Closed): Can't export to tiff in layout composer

Can't export to tiff in layout composer (qgis 3.0.1), like in 2.18. In windows with version 3.0.0 allows the image ex... Hugo Santos

12:45 AM Bug report #18677 (Feedback): Crashes - Attempting to Save ESRI Shapefile after running "Point to...

Can you share your data and the setting used in the algorithm? Nyall Dawson

10:51 PM Bug report #18677 (Closed): Crashes - Attempting to Save ESRI Shapefile after running "Point to P...

When I attempt to save a copy of the 'path' created QGIS crashes and provided the following report:
h2. User Feedb... Eric Berkowitz

09:48 PM Feature request #18676 (Open): Allow Map Themes to Optionally Store Spatial Bookmarks

Allow a saved map theme to also store the geospatial extent (i.e., spatial bookmark), this could be an option, check ... Rob Willson

09:41 PM Feature request #18675 (Open): Rename Map Themes directly in Map Theme Dropdown Menu

Map themes (formerly presets) are one of the most valuable and useful tools in QGIS but it is hard to organize or re-... Rob Willson

09:23 PM Bug report #18672 (Feedback): QGIS Crashing when Importing DEM data

You'll need to provide a link to the data Nyall Dawson

05:09 PM Bug report #18672 (Closed): QGIS Crashing when Importing DEM data

Good morning,
I am trying to import DEM data and QGIS keeps on crashing every time I place "Disc Image File", whi... Vincent Racine

07:23 PM Bug report #18521: Conditional formatting rules do not apply to relation reference widget combobo...

Am I right with the suppose that the order (sort) has no influence. It's only in case you have a Display Expression t... David Signer

06:05 PM Bug report #18674 (Closed): Display of NULL values of attributes of type INTEGER not correct when...

NULL Values of attributes of type INT are incorrectly displayed as "0" instead of the representation for NULL values ... Manuel K

05:19 PM Bug report #17851: Top or bottom context menu item is selected and clicked when right clicking a ...

At the moment I am attempting to nail down that this might be a XFCE specific issue, along with a drag and drop prob... Patrick Dunford

05:16 PM Bug report #18673 (Open): Value relation widget: Multiple selections, not null attribute

In case of multiple selections of a NOT NULL attribute in a value selection widget, the green tick mark is displayed ... Manuel K

04:41 PM Bug report #18656: Print Layout: unable to manually modify the X and Y coordinates in the map Ite...

Did something change in that area in the underlying libraries? Because it works pretty well in 2.18: i can type x and... Harrissou Santanna

02:05 PM Bug report #16790: QGIS fails to start on Ubuntu 16.10

Chris Barrington-Leigh wrote:
> SOLVED / workaround:
> Here is what restored QGIS for me: (after reverting to the... marisn -

01:29 PM Feature request #18670 (Open): Map extent based on atlas feature attribute

I am using Atlas on QGIS 2.18.17. The city I am working on is divided by wards and these wards are divided by blocks.... Maxime RIOU

12:10 PM Bug report #18669 (Closed): Crashed after changing the UI theme

h2. User Feedback
When I change the UI theme to Night Mapping.
h2. Report Details
*Crash ID*: 531d1e3749f3e5... YiJie Wu

12:07 PM Bug report #18668 (Open): integrated document viewer not working

I'm using integrated document viewer in the attachment widget, the photo doesn't show up properly only showing small ... Imaduddin Idris

11:03 AM Feature request #18667 (Open): Ability to remove QGIS projects saved in Postgres from Browser Panel

Currently you can only remove QGIS projects saved in Postgres from Save to window. It will be great to be able to rem... Saber Razmjooei

09:42 AM Bug report #18290: Embedded form (relation) disappears when changing configuration of a layer

Merged https://github.com/qgis/QGIS/pull/6716 David Signer

09:06 AM Bug report #18597: Layer reprojection from EPSG:3844 to EPSG:4326 has offset since QGIS 2.18.8

Thank you for interest. L Sz

08:41 AM Bug report #18666 (Open): QGIS 3 lost CRS for some QGIS 2 project

An example, using the QWAT "project":https://github.com/qwat/QWAT/tree/master/qgis-project
Loïc BARTOLETTI

04:48 AM Bug report #17350 (Closed): In distance matrix a point is its own neighbour

Applied in changeset commit:qgis|7fa9d4120a01effa68e3a6fd83cbbf5686784a97. Nyall Dawson

04:48 AM Bug report #17350 (Closed): In distance matrix a point is its own neighbour

Applied in changeset commit:qgis|7fa9d4120a01effa68e3a6fd83cbbf5686784a97. Nyall Dawson

04:42 AM Bug report #18504 (Closed): Qgis crash when info over geometry was cliccked

Applied in changeset commit:qgis|45c400c25c128061923b0aded682557653ad1c6a. Nyall Dawson

04:42 AM Bug report #18504 (Closed): Qgis crash when info over geometry was cliccked

Applied in changeset commit:qgis|45c400c25c128061923b0aded682557653ad1c6a. Nyall Dawson

02:58 AM Bug report #18218 (Closed): Processing: use selected features no more avaiable for GRASS tools?

Applied in changeset commit:qgis|3dec1755b64ee564aca26defdf3aec8b0a416bc4. Nyall Dawson

02:58 AM Bug report #18218 (Closed): Processing: use selected features no more avaiable for GRASS tools?

Applied in changeset commit:qgis|3dec1755b64ee564aca26defdf3aec8b0a416bc4. Nyall Dawson

02:58 AM Bug report #18662 (Closed): grass algorithms don't work inside modeler?

Applied in changeset commit:qgis|8ba762a630672437e4df6dcd377cb0c9413b8a13. Nyall Dawson

02:58 AM Bug report #18662 (Closed): grass algorithms don't work inside modeler?

Applied in changeset commit:qgis|8ba762a630672437e4df6dcd377cb0c9413b8a13. Nyall Dawson

02:52 AM Bug report #18038: Select by Location not working when data is in PostGIS

Can you provide a sql dump of the postgis tables used? Nyall Dawson

02:41 AM Bug report #18038: Select by Location not working when data is in PostGIS

I went back and did some more testing. If I run the test with the current 2.18.17 (windows/linux) it works fine - sel... Randal Hale

2018-04-08

10:27 PM Bug report #18587 (Rejected): Problem adding ArcGIS MapServer with proxy url

Sandro Mani

09:33 PM Feature request #18665 (Feedback): Layer styling labels wrap on character has no way to display c...

In layer styling for labels, in the formatting tab there is the option to wrap multiple lines on a specified characte... Patrick Dunford

05:47 PM Feature request #18664: UCS - 2000 coordinate systems - correct params towgs84

The usual workflow for datum shifts is:
# report the parameters at the EPSG database
# GDAL imports the data fr... Andre Joost

04:29 PM Feature request #18664 (Open): UCS - 2000 coordinate systems - correct params towgs84

Some time ago, the transition parameters from the UCS2000 datum to ETRS89 were published.
http://dgm.gki.com.ua/fil... Denys Dudko

12:31 PM Bug report #18663 (Closed): QGIS 3.0.1 crashed

h2. User Feedback
Just deleted a couple of columns in a table, after calculating the area of polygons.
h2. Repo... Ricardo Gonzalez

10:40 AM Bug report #18454 (Closed): Newer builds (with proj 5?) can't reproject XYZ layers (and other wor...

Ok, definitely not a QGIS issue. Gdalwarp 2.2.3 @ proj 4.9.3 is able to transform a worldwide geotiff to epsg:2180 de... Borys Jurgiel

10:40 AM Bug report #18454 (Closed): Newer builds (with proj 5?) can't reproject XYZ layers (and other wor...

Ok, definitely not a QGIS issue. Gdalwarp 2.2.3 @ proj 4.9.3 is able to transform a worldwide geotiff to epsg:2180 de... Borys Jurgiel

09:11 AM Bug report #18597: Layer reprojection from EPSG:3844 to EPSG:4326 has offset since QGIS 2.18.8

According to http://epsg.io/3844-1645, the shift parameters of datum Pulkovo 1942(58) are different for Poland and Ro... Andre Joost

2018-04-07

12:46 AM Bug report #17555 (Closed): Problem with GRASS in Processing plugin

Fixed in master/3.0 Nyall Dawson

12:46 AM Bug report #17555 (Closed): Problem with GRASS in Processing plugin

Fixed in master/3.0 Nyall Dawson

12:46 AM Bug report #18662 (Open): grass algorithms don't work inside modeler?

6760 relates only to GDAL provider, a separate fix is required here Nyall Dawson

09:17 PM Bug report #18662 (Feedback): grass algorithms don't work inside modeler?

Should be fixed thanks to https://github.com/qgis/QGIS/pull/6760 so try the next dev build and let us know. Harrissou Santanna

08:57 PM Bug report #18662 (Closed): grass algorithms don't work inside modeler?

Apparently grass algorithms are unable to read as input temporary layers from previous algorithms. I tried on two PCs... Luca Ongaro

08:04 PM Bug report #18454: Newer builds (with proj 5?) can't reproject XYZ layers (and other world-wide r...

After some more tests I can precise the issue: *Raster* layers (tested XYZ, WMS and GeoTiffs) with a world-wide exten... Borys Jurgiel

11:41 AM Bug report #18421: Attribute Table refresh issue when deleting features from shapefile

More useful details using any shapefile:
deleting the first N features and saving the editing, in the attribute tabl... Geo Dev

11:25 AM Feature request #18645: Layout arrow item: allow arrow direction to be set

> I think this should be a feature request, allowing the arrow direction to be set. It's not possible to change the e... Harrissou Santanna

11:25 AM Feature request #18645: Layout arrow item: allow arrow direction to be set

> I think this should be a feature request, allowing the arrow direction to be set. It's not possible to change the e... Harrissou Santanna

10:54 AM Bug report #18656: Print Layout: unable to manually modify the X and Y coordinates in the map Ite...

Ah, in that case I'm clueless - I have no idea about localisation and comma/decimal handling, and an impromptu qa hel... Nyall Dawson

08:38 AM Bug report #18656 (Open): Print Layout: unable to manually modify the X and Y coordinates in the ...

No more steps than what is described above.
Investigating a bit, i find that it has to do with conversion of decima... Harrissou Santanna

04:44 AM Bug report #18656 (Feedback): Print Layout: unable to manually modify the X and Y coordinates in ...

Works fine here - can you confirm the steps required to reproduce this? Nyall Dawson

10:12 AM Bug report #18661 (Closed): DWG files flag as invalid data source in QGIS 3.0.1

I am trying to import a DWG file from Autodesk. With a new project holding no data, either importing via Project, Im... Peter Archdale

10:06 AM Bug report #18659: Symbol levels reset when changing style settings

Update!
It seems like I can "lock" the symbol levels by switching to a different layer in the style panel and then... Klas Karlsson

09:59 AM Bug report #18659 (Open): Symbol levels reset when changing style settings

A line layer with a symbol layer order that is +not+ in the default order will apply properly, but when a style prope... Klas Karlsson

10:01 AM Feature request #18660 (Open): Layout map item: use crs selector widget for map grid

Layout map item properties -> grid -> modify grid
In the map grid properties, the crs parameter does not use the adh... Harrissou Santanna

09:17 AM Bug report #18658 (Closed): PyQGIS Developer Cookbook and the modules

Dear members of QGIS,
first of all I want to thank you big time for the efforts you made, make and will make by p... Moritz Langer

05:04 AM Bug report #18655: "Too many attributes" error when saving layer with auxiliary fields

Alessandro Pasotti wrote:
> The attached project contains a lot of unavailable layers, can you please attach a proje... Nathan Perry

05:04 AM Bug report #18655: "Too many attributes" error when saving layer with auxiliary fields

Alessandro Pasotti wrote:
> The attached project contains a lot of unavailable layers, can you please attach a proje... Nathan Perry

2018-04-06

12:49 AM Bug report #18657 (Rejected): error after used SCP plugin

Crash ID: ab7ba4a817fc805558b7a63924bf59e1ca603145
Stack Trace
memset :
GDALRegister_GTiff :
GDALRegister... Rolando Bustillo

« Previous

Next »