Activity

From 2010-10-03 to 2010-11-01

2010-11-01

06:27 PM Feature request #3118: GdalTools (warp): add support for ntv2 grid and +towgs84 transformations
How is this bug fix progressing? I haven't seen any updates for a long time. badams -
06:27 PM Bug report #3099: Projection Failure

How is this bug fix progressing? I haven't seen any updates for a long time.
badams -
12:46 PM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied in commit:47056460 (SVN r14486) - thanks Markus Paolo Cavallini
12:46 PM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied in commit:47056460 (SVN r14486) - thanks Markus Paolo Cavallini
11:01 AM Feature request #2832: rule-based renderer in symbology-ng should show rules in legend
Thank you wonder for putting it in the trunk!
Here are some thoughts about how to deal with the symbol levels.
IMHO,...
Mayeul Kauffmann
10:48 AM Feature request #3178 (Closed): Additional operators for raster calculator
Commited, because otherwise it will be hard to fix the remaining raster calc bugs in trac. Marco Hugentobler
10:48 AM Feature request #3178 (Closed): Additional operators for raster calculator
Commited, because otherwise it will be hard to fix the remaining raster calc bugs in trac. Marco Hugentobler
08:38 AM Feature request #3178 (Closed): Additional operators for raster calculator
The following patch adds additional comparison operators for the raster calculator. If the condition evaluates to tru... Marco Hugentobler
10:33 AM Feature request #3179 (Open): File Filter on load dialogs
Seems like there's a need for a file filter that is the concatenation of the providers available. So that the default... Alex Mandel
09:36 AM Bug report #3054 (Closed): QGIS crashes in MapServer plugin
Seems to be fixed. dr -
09:36 AM Bug report #3054 (Closed): QGIS crashes in MapServer plugin
Seems to be fixed. dr -
09:07 AM Bug report #3054: QGIS crashes in MapServer plugin
Can't reproduce here... Borys Jurgiel
08:57 AM Bug report #3054: QGIS crashes in MapServer plugin
was this fixed? can you please give it a try? thanks Giovanni Manghi
09:24 AM Bug report #3126: Sliver holes remain after dissolve
Nevertheless I agree that at least QGIS should warn that the attached polygon (1.zip) does have geometry errors. Actu... Giovanni Manghi
04:56 AM Bug report #3126 (Closed): Sliver holes remain after dissolve
Hi gislab,
here the following.
The vector "1.zip" is topologically unclean, no way you can change/correct this in...
Giovanni Manghi
04:56 AM Bug report #3126 (Closed): Sliver holes remain after dissolve
Hi gislab,
here the following.
The vector "1.zip" is topologically unclean, no way you can change/correct this in...
Giovanni Manghi
09:22 AM Feature request #3176 (Closed): change "keyhole markup language" to KML
fixed in commit:7e5a9cb4 (SVN r14483). Jürgen Fischer
09:22 AM Feature request #3176 (Closed): change "keyhole markup language" to KML
fixed in commit:7e5a9cb4 (SVN r14483). Jürgen Fischer
02:36 AM Feature request #3176 (Closed): change "keyhole markup language" to KML
in the "save as..." dialogs.
Not every users sees that "keyhole markup language" is actually KML.
Giovanni Manghi
09:14 AM Feature request #3175 (Closed): remeber last format choosen in the "add vector dialog"
probably a duplicate of #2298 Jürgen Fischer
09:14 AM Feature request #3175 (Closed): remeber last format choosen in the "add vector dialog"
probably a duplicate of #2298 Jürgen Fischer
02:34 AM Feature request #3175 (Closed): remeber last format choosen in the "add vector dialog"
in order to avoid see the dialog always open with "shapefile". Giovanni Manghi
03:16 AM Bug report #3154 (Feedback): SVG Patterns: References to SVG files should start with pattern/symb...
I tested this fix on Linux. It works with paths relative from the default system (/usr/local/share/qgis/svg) but not ... Andreas Neumann
03:16 AM Bug report #3154 (Feedback): SVG Patterns: References to SVG files should start with pattern/symb...
I tested this fix on Linux. It works with paths relative from the default system (/usr/local/share/qgis/svg) but not ... Andreas Neumann
02:39 AM Feature request #3177 (Closed): field calculator improvements: functions for strings
it would be nice to have:
*) a function for search/replace
*) a function to change everything to uppercase/lowerca...
Giovanni Manghi
01:25 AM Bug report #3174 (Closed): Raster Calculator: apparently incoherent results
The following calculations do not return expected results on the attached raster:
w[email protected] * 100
the resulting r...
Paolo Cavallini
01:18 AM Feature request #3173 (Closed): add a "Clear" button to Raster Calculator
Please add a "Clear" button to the Raster Calculator interface, to make it easier to restart with new calculations. Paolo Cavallini
01:16 AM Bug report #3172 (Closed): raster calculator does not work with RasterLite?
Testing the new raster calculator, I discovered that apparently it does not work with valid [[RasterLite]] layers (or... Paolo Cavallini
01:09 AM Bug report #3143: New Label Engine: ony integer values allowed for font-size in map units
can confirm that it works now - thanks a lot! Andreas Neumann
01:04 AM Bug report #3114: Digitizing issue whith attribute updates when "Avoid intersection" and "shared ...
I can confirm that this bug is now fixed - thank you! Andreas Neumann

2010-10-31

11:42 PM Bug report #3171 (Closed): Offline editing plugin: fails with MULTI geometries
The offline editing plugin does not detect the Multi-geometry types correctly.
It tries to import MULTIPOLYGON geome...
Paolo Cavallini
11:29 AM Bug report #3126: Sliver holes remain after dissolve
damn breaks, sorry :( and I meant "note" not "not" in problem 1, point 2.
Maxim Dubinin
11:27 AM Bug report #3126: Sliver holes remain after dissolve
ok, problem 1: extra holes
1. Download isolated sample, http://gis-lab.info/share/1.zip
2. Dissolve in fTools by FED...
Maxim Dubinin
11:03 AM Bug report #3126 (Feedback): Sliver holes remain after dissolve
I may have misunderstand the problem, but you can always reopen the ticket ;)
Back to the beginning: I'm just saying...
Giovanni Manghi
11:03 AM Bug report #3126 (Feedback): Sliver holes remain after dissolve
I may have misunderstand the problem, but you can always reopen the ticket ;)
Back to the beginning: I'm just saying...
Giovanni Manghi
11:00 AM Bug report #3126: Sliver holes remain after dissolve
Thank you for your time, but I didn't ask about GRASS.
I asked why dissolve isn't working correctly in _QGIS_ and ga...
Maxim Dubinin
10:06 AM Bug report #3126 (Closed): Sliver holes remain after dissolve
Replying to [comment:4 gislab]:
> I don't have grass.
>
Ok. Try Install it and import your vector, you'll see tha...
Giovanni Manghi
10:06 AM Bug report #3126 (Closed): Sliver holes remain after dissolve
Replying to [comment:4 gislab]:
> I don't have grass.
>
Ok. Try Install it and import your vector, you'll see tha...
Giovanni Manghi
07:18 AM Bug report #3126: Sliver holes remain after dissolve
I don't have grass.
Did you check out my picture above?
Here is more, if you convert source polygons to nodes and a...
Maxim Dubinin
03:06 AM Bug report #3126: Sliver holes remain after dissolve
Replying to [comment:2 gislab]:
> any chance to see the proof for "slivers"?
this question is a reply to me?
if yes...
Giovanni Manghi
10:43 AM Bug report #3167 (Closed): calculation of ruggedness
Ruggedness index is calculated according to Riley et al. 1999 (see corrected formula in http://www.fw.msu.edu/~rileys... Marco Hugentobler
10:43 AM Bug report #3167 (Closed): calculation of ruggedness
Ruggedness index is calculated according to Riley et al. 1999 (see corrected formula in http://www.fw.msu.edu/~rileys... Marco Hugentobler
10:17 AM Feature request #782: color ramps for raster layers
See also #3127 Markus Neteler
10:17 AM Feature request #3127: support GRASS color rules
See also #782 Markus Neteler
10:13 AM Bug report #3154 (Closed): SVG Patterns: References to SVG files should start with pattern/symbol...
Fixed in commit:2ba62274 (SVN r14464) Marco Hugentobler
10:13 AM Bug report #3154 (Closed): SVG Patterns: References to SVG files should start with pattern/symbol...
Fixed in commit:2ba62274 (SVN r14464) Marco Hugentobler
09:37 AM Feature request #3097: Add preference to set/override environment variables
Specific example: [[GdalTools]]. It does have a path configuration option, for where the GDAL programs are, but it's... William Kyngesburye
09:32 AM Bug report #3170 (Closed): many GDAL Tools don't work in OS X standalone
On OS X standalone Qgis, the GDAL python extension is in the Qgis python folder in the application, but this is not p... William Kyngesburye
09:18 AM Bug report #3034: new symbology: quite slow at opening Symbol properties
Tested, it works, thanks.
BTW: how could check which SVG symbol causes problems? Perhaps we should automatically chec...
Paolo Cavallini
05:48 AM Bug report #3034 (Closed): new symbology: quite slow at opening Symbol properties
Now everything seems to work. Only opening the SVG marker list for adding one of them as a symbol level takes about a... Borys Jurgiel
05:48 AM Bug report #3034 (Closed): new symbology: quite slow at opening Symbol properties
Now everything seems to work. Only opening the SVG marker list for adding one of them as a symbol level takes about a... Borys Jurgiel
06:11 AM Feature request #3169 (Closed): The fTools' geometry validity check could zoom to the invalid fea...
Zooming to the invalid feature directly from the plugin window would be great usability improvement. Borys Jurgiel

2010-10-30

08:50 PM Bug report #3126: Sliver holes remain after dissolve
any chance to see the proof for "slivers"?
here is mine that's something is wrong and artifacts appear where they sh...
Maxim Dubinin
03:13 PM Bug report #3168 (Closed): Log out is canceled, when project is not saved
What's happening:
* Try to log out with changes not saved
* The saving dialog appears
* No matter what you pick, the...
Volker Fröhlich
11:41 AM Bug report #3141: Georeferencer transformation type dropdown menu is incorrect
The reason of this bug is wrong place of the Projective transformation in the Transformation [[ComboBox]]. I have att... lynxID -
10:43 AM Bug report #3167 (Closed): calculation of ruggedness
In browsing the code for ruggedness I found something odd.
The formula is missing division by n prior to the executi...
Trevor Wiens
09:37 AM Feature request #1022: delimited text layer plugin: robustness
I have recollections of that the fix was not as simple as I first thought. Have you tested it with umlauts and utf-8?... Magnus Homann
04:23 AM Bug report #3006 (Closed): Crash when negative symbol level value is defined
fixed in commit:1494e42f (SVN r14455) Martin Dobias
04:23 AM Bug report #3006 (Closed): Crash when negative symbol level value is defined
fixed in commit:1494e42f (SVN r14455) Martin Dobias
03:50 AM Bug report #3034: new symbology: quite slow at opening Symbol properties
Recently (cca 2 weeks ago) I have improved the loading time of the symbol properties dialog. Is it acceptable now?
A...
Martin Dobias
03:45 AM Feature request #3023 (Closed): labeling plugin: misses the field for data driven label angle (li...
Marco has added this functionality recently.
btw. in order to use data-defined rotation, you have to set data-define...
Martin Dobias
03:45 AM Feature request #3023 (Closed): labeling plugin: misses the field for data driven label angle (li...
Marco has added this functionality recently.
btw. in order to use data-defined rotation, you have to set data-define...
Martin Dobias
03:05 AM Bug report #2995: segfault using Style Manager
Can you please test again? I think the problems have been fixed some time ago. Martin Dobias
03:03 AM Bug report #3079 (Closed): Labeling buffer issue
This should be fixed by the above mentioned patch. Martin Dobias
03:03 AM Bug report #3079 (Closed): Labeling buffer issue
This should be fixed by the above mentioned patch. Martin Dobias
03:00 AM Bug report #3150 (Closed): OpenStreetMap plugin - error downloading .osm data
fixed in commit:b21f5e6e (SVN r14454). Martin Dobias
03:00 AM Bug report #3150 (Closed): OpenStreetMap plugin - error downloading .osm data
fixed in commit:b21f5e6e (SVN r14454). Martin Dobias
02:33 AM Feature request #3160 (Closed): Add projectRead() and newProjectCreated() signals to QgsInterface
applied in commit:1fbf5eea (SVN r14453) Martin Dobias
02:33 AM Feature request #3160 (Closed): Add projectRead() and newProjectCreated() signals to QgsInterface
applied in commit:1fbf5eea (SVN r14453) Martin Dobias

2010-10-29

03:14 PM Feature request #3157 (Closed): Load an editable layer as a readonly one
applied from commit:519f1206 (SVN r14452) Giuseppe Sucameli
03:14 PM Feature request #3157 (Closed): Load an editable layer as a readonly one
applied from commit:519f1206 (SVN r14452) Giuseppe Sucameli
03:10 PM Feature request #3151 (Closed): Enable "Source SRS" when SRS available
fixed from commit:6253fb72 (SVN r14451) Giuseppe Sucameli
03:10 PM Feature request #3151 (Closed): Enable "Source SRS" when SRS available
fixed from commit:6253fb72 (SVN r14451) Giuseppe Sucameli
12:31 PM Feature request #3151 (In Progress): Enable "Source SRS" when SRS available
The new patch gets the crs using the [[GdalTools]]_utils' related function.
Some layers have a CRS that QGis doesn't...
Giuseppe Sucameli
01:59 PM Feature request #1022 (Closed): delimited text layer plugin: robustness
fixed in commit:4afb7293 (SVN r14449) Jürgen Fischer
01:59 PM Feature request #1022 (Closed): delimited text layer plugin: robustness
fixed in commit:4afb7293 (SVN r14449) Jürgen Fischer
01:32 PM Bug report #3165 (Closed): Strange "Remove Layer(s)" toolbar action changing the selected layer
fixed in commit:5291238d (SVN r14448) Jürgen Fischer
01:32 PM Bug report #3165 (Closed): Strange "Remove Layer(s)" toolbar action changing the selected layer
fixed in commit:5291238d (SVN r14448) Jürgen Fischer
11:56 AM Feature request #3166 (Closed): Delimited Text Plugin doesn't import files using Mac encoding
duplicate of #1022 Jürgen Fischer
11:56 AM Feature request #3166 (Closed): Delimited Text Plugin doesn't import files using Mac encoding
duplicate of #1022 Jürgen Fischer
11:42 AM Feature request #3166 (Closed): Delimited Text Plugin doesn't import files using Mac encoding
The plugin does not to recognize Mac end-of-line characters. Files have to be converted into MS or Unix encoding. The... Anita Graser
05:55 AM Bug report #3058: print composer: exporting to PDF does not resize correctly vectors if symbology...
I tested on several machines, and the printer output was usually close to 15 mm. On screen, I had different results, ... Marco Hugentobler
05:39 AM Bug report #3143 (Closed): New Label Engine: ony integer values allowed for font-size in map units
Fixed in commit:030f658c (SVN r14447) Marco Hugentobler
05:39 AM Bug report #3143 (Closed): New Label Engine: ony integer values allowed for font-size in map units
Fixed in commit:030f658c (SVN r14447) Marco Hugentobler

2010-10-28

06:19 PM Bug report #3165: Strange "Remove Layer(s)" toolbar action changing the selected layer
Confirm on Windows XP. dr -
02:45 PM Bug report #3165 (Closed): Strange "Remove Layer(s)" toolbar action changing the selected layer
There is a strange behavior selecting layers in the legend.
If I select only layers, the "Remove Layer(s)" action is...
Giuseppe Sucameli
03:55 PM Feature request #2348: Overview map in composer
What might be a more clear solution would be to have an overview map option in the composer that uses those layers th... John Tull
02:17 PM Bug report #3114 (Closed): Digitizing issue whith attribute updates when "Avoid intersection" and...
commit:fb48cc0c (SVN r14445) should fix this. Please test and reopen if not. Marco Hugentobler
02:17 PM Bug report #3114 (Closed): Digitizing issue whith attribute updates when "Avoid intersection" and...
commit:fb48cc0c (SVN r14445) should fix this. Please test and reopen if not. Marco Hugentobler
11:17 AM Bug report #3153 (Closed): Query builder window too wide due to long layer data source name
Jürgen Fischer
11:16 AM Bug report #3153: Query builder window too wide due to long layer data source name
fixed in commit:5cb3ae73 (SVN r14434). Jürgen Fischer
09:53 AM Bug report #3131: GRASS toolbox: v.in.ogr.qgis.loc shows 100% while still creating topology
I confirm this on v.in.ogr module. dr -
09:46 AM Bug report #3164 (Closed): Gibberish in output tab of GRASS tools
See attachment. dr -
09:41 AM Bug report #3163 (Closed): GRASS Options tab use system locale
GRASS Options tab use system locale even if set "Override system locale" in QGIS options to "en_US". dr -
09:28 AM Bug report #3162 (Closed): GRASS raster display inaccurate
A GRASS raster displayed in QGIS changes it's position relative to other layers when the map is moved with the mouse.... grasslandtom -
09:04 AM Bug report #3155: Zoom to layer works incorrectly while layer editing
5-7. I confirm, the extent looks wrong.
http://gis-lab.info/images/screenshots/20101028-69a-65kb.jpg
9. I confirm, a...
Maxim Dubinin

2010-10-27

04:25 PM Feature request #2348: Overview map in composer
It would also be nice to show different layers and symbology in the overview.
I often reduce the level of detail in s...
timmie -
04:24 PM Feature request #2348: Overview map in composer
See also:
http://thread.gmane.org/gmane.comp.gis.qgis.user/9573
http://thread.gmane.org/gmane.comp.gis.qgis.user/9581
timmie -
11:23 AM Bug report #3161 (Closed): Crash with Window Resize
duplicate of #2714 Jürgen Fischer
11:23 AM Bug report #3161 (Closed): Crash with Window Resize
duplicate of #2714 Jürgen Fischer
10:52 AM Bug report #3161 (Closed): Crash with Window Resize
Appears to be a problem with the canvas size updater. Observed two symptoms of the problem-
When opening a saved pr...
glennvorhes -
06:12 AM Feature request #3160 (Closed): Add projectRead() and newProjectCreated() signals to QgsInterface
Proposed patch add to the [[QgsInterface]] two new signals: projectRead() and newProjectCreated(). This will be usefu... Alexander Bruy
05:57 AM Bug report #3159 (Closed): invalid geometry in python console crashes qgis
Open Qgis
Start python Console
Enter and execute this code: ...
Alessandro Pasotti

2010-10-26

01:01 AM Bug report #2204 (Closed): Crashing QGIS when add new raster layer ecw
now it works with latest DLLS of ECW 4.1.
I've put them into:
%OSGEO4W_ROOT%\\bin
luca76 -
01:01 AM Bug report #2204 (Closed): Crashing QGIS when add new raster layer ecw
now it works with latest DLLS of ECW 4.1.
I've put them into:
%OSGEO4W_ROOT%\\bin
luca76 -
11:56 PM Bug report #3158 (Closed): Query tool doesn't work on GeoJSON layer
Seems to be an OGR problem. Issue forwarded as [[GDAL #3803]] Jürgen Fischer
11:56 PM Bug report #3158 (Closed): Query tool doesn't work on GeoJSON layer
Seems to be an OGR problem. Issue forwarded as [[GDAL #3803]] Jürgen Fischer
10:57 PM Bug report #3158 (Closed): Query tool doesn't work on GeoJSON layer
[[GeoJSON]] layer in attachment. dr -
01:03 PM Bug report #2870 (Closed): mapserverexportplugin: qgis segfault when plugin used with unsaved pro...
fixed by code from Martin in commit:752bad8d (SVN r14435)
see mail thread: http://lists.osgeo.org/pipermail/qgis-dev...
Richard Duivenvoorde
01:03 PM Bug report #2870 (Closed): mapserverexportplugin: qgis segfault when plugin used with unsaved pro...
fixed by code from Martin in commit:752bad8d (SVN r14435)
see mail thread: http://lists.osgeo.org/pipermail/qgis-dev...
Richard Duivenvoorde
12:06 PM Bug report #2339: QGis crashes when moving border between map canvas and overview map and "use re...
tested again with trunk, on ubuntu 10.04 and 10.10 (different libqt4 versions), render caching on and off and it is a... Giovanni Manghi
11:11 AM Bug report #2884: crash when resizing vertically the overview window
it crashes also on ubuntu 10.10, qgis trunk and libqtcore4 4:4.7.0-0 Giovanni Manghi
03:58 AM Bug report #2884: crash when resizing vertically the overview window
still true on trunk/ubuntu and libqtcore4 4:4.6.2-0 Giovanni Manghi
04:42 AM Feature request #3157 (Closed): Load an editable layer as a readonly one
Would be very useful for plugins developer the possibility to add a layer in canvas disabling its editing capabilitie... Giuseppe Sucameli
02:01 AM Feature request #3139 (Closed): [Patch] Custom query for the spatialite provider
I've applied the patch suggested by brushtyler
Committed in r.14435
Sandro Furieri
02:01 AM Feature request #3139 (Closed): [Patch] Custom query for the spatialite provider
I've applied the patch suggested by brushtyler
Committed in r.14435
Sandro Furieri

2010-10-25

01:41 AM Bug report #3156 (Closed): wms getmap request with unknown epsg
duplicate of #1589 Jürgen Fischer
01:41 AM Bug report #3156 (Closed): wms getmap request with unknown epsg
duplicate of #1589 Jürgen Fischer
01:17 AM Bug report #3156 (Closed): wms getmap request with unknown epsg
Hello all,
we noticed that qgis in not able to build the WMS getMap Request if an EPSG is not recognized by qgis (mea...
francesco -
01:40 AM Bug report #1589 (Feedback): problem visualizing WMS defined with a EPSG:NONE srs
see also #3156 Jürgen Fischer
01:40 AM Bug report #1589 (Feedback): problem visualizing WMS defined with a EPSG:NONE srs
see also #3156 Jürgen Fischer
11:28 PM Bug report #3155 (Closed): Zoom to layer works incorrectly while layer editing
# Open raster layer (http://gis-lab.info/share/DR/modis.7z 404)
# Add new polygonal vector layer
# Draw little polyg...
dr -
05:27 PM Feature request #3118: GdalTools (warp): add support for ntv2 grid and +towgs84 transformations
I loaded . The 4 vector projections now import in the correct location so thats a good start.
Projections are not st...
badams -
08:49 AM Bug report #3154 (Closed): SVG Patterns: References to SVG files should start with pattern/symbol...
For SVG pattern fills, currently, the paths are stored relatively to the project file and not relatively to the symbo... Andreas Neumann
07:42 AM Bug report #3153 (Closed): Query builder window too wide due to long layer data source name
When making a query for layer with looong data source name i.e. Shapefile + SQL query, query builder window gets auto... marisn -
07:21 AM Bug report #2655: QuickPrint elements missing
Duplicated in #3152 Paolo Cavallini
07:21 AM Bug report #3152 (Closed): Export PDF print Layout
Duplicate of #2655 Paolo Cavallini
07:21 AM Bug report #3152 (Closed): Export PDF print Layout
Duplicate of #2655 Paolo Cavallini
02:37 AM Bug report #3152 (Closed): Export PDF print Layout
When I try to export the map to pdf in Layout Session, in the .pdf created disapper the legenda point symbol piazzic -
02:02 AM Feature request #3151 (Closed): Enable "Source SRS" when SRS available
When raster is georeferenced it's SRS displayed in "Source SRS" field of the [[GdalTools]] Warp dialog. But by defaul... Alexander Bruy

2010-10-24

12:40 AM Bug report #3150: OpenStreetMap plugin - error downloading .osm data
oh yes, seeing it again too. Giovanni Manghi
05:21 AM Bug report #3150: OpenStreetMap plugin - error downloading .osm data
Yeah, I'm using Qgis 1.6 (rev. 14431), built yesterday (24th October 2010) and I get the above described error. I'm o... Ricardo Silva
05:08 AM Bug report #3150: OpenStreetMap plugin - error downloading .osm data
Ricardo did you tested trunk. I used to get the same error, but now in trunk seems to be gone. Giovanni Manghi
03:56 AM Bug report #3150 (Closed): OpenStreetMap plugin - error downloading .osm data
When trying to download .osm data into Qgis a python error is thrown and nothing gets added to the canvas, even thoug... Ricardo Silva
09:16 AM Bug report #2204: Crashing QGIS when add new raster layer ecw
the dlls are not redistributable: go to the erdas site, sign up, download the new sdk, accept the licence, install in... Giovanni Manghi
08:24 AM Bug report #2204: Crashing QGIS when add new raster layer ecw
Can you send me the new ecw-dlls to [email protected]?
Thanks
Gerhard
Gerhard Spieles

2010-10-23

05:53 AM Bug report #3146: Erase button always disabled
the problem IS NOT qgis, is OGR. The patch to allow OGR delete shapes colums has already been filed a long ago, but n... Giovanni Manghi
05:47 AM Bug report #3146: Erase button always disabled
This bug is set as duplicate of #1446 (which appears to be fixed 21 months ago), the bug is still present in 1.5.0 te... Alessandro Pasotti
02:50 AM Bug report #3065 (Closed): Curved labels not printed if fontsize small
Should be fixed with commit:4c9b6b20 (SVN r14431) Marco Hugentobler
02:50 AM Bug report #3065 (Closed): Curved labels not printed if fontsize small
Should be fixed with commit:4c9b6b20 (SVN r14431) Marco Hugentobler

2010-10-22

01:59 AM Bug report #2558 (Closed): JPEG2000 images display as black under Windows (QGIS 1.4.0)
Not reproducible here. Closing it, pending user feedback. Please reopen it if necessary. Paolo Cavallini
01:59 AM Bug report #2558 (Closed): JPEG2000 images display as black under Windows (QGIS 1.4.0)
Not reproducible here. Closing it, pending user feedback. Please reopen it if necessary. Paolo Cavallini
01:50 AM Bug report #2283: node tool/select features tool do not have effects on a shapefile
So probably the shapefile has topological errors. Not sure how should we deal with buggy shp, though. Paolo Cavallini
01:40 AM Bug report #1343: dxf2shp plugin does not distinguish between polygon and polyline correctly
Please note that DXF support is being incorporated in GDAL >=1.7, so the plugin will be probably dropped as soon as i... Paolo Cavallini
01:37 AM Bug report #2482: Interpolation plugin causes seg fault
I can provide the data again. Marco has it in any case. The crash was confirmed but I don't know if anything has been... Giovanni Manghi
01:33 AM Bug report #2482: Interpolation plugin causes seg fault
Duplicated in #2988 Paolo Cavallini
01:21 AM Bug report #2482: Interpolation plugin causes seg fault
Data are no longer available. Any hope of having this fixed? Paolo Cavallini
01:37 AM Bug report #896: Quickprint Plugin scaling issues
Please note taht [[QuickPrint]] plugin will probably be removed from future versions of QGIS, as better options are a... Paolo Cavallini
01:34 AM Bug report #3054: QGIS crashes in MapServer plugin
See also #2870 Paolo Cavallini
01:32 AM Bug report #2988 (Closed): segfaults on making interpolation
Duplicate of #2482 Paolo Cavallini
01:32 AM Bug report #2988 (Closed): segfaults on making interpolation
Duplicate of #2482 Paolo Cavallini
01:27 AM Bug report #2884: crash when resizing vertically the overview window
I cannot reproduce it with libqtcore4 4:4.6.3-4 on Debian unstable Paolo Cavallini
01:25 AM Bug report #2870: mapserverexportplugin: qgis segfault when plugin used with unsaved project
Duplicated in #2966 Paolo Cavallini
01:24 AM Bug report #2966 (Closed): QGIS crashes when in Mapserver Export
Duplicate of #2870 Paolo Cavallini
01:24 AM Bug report #2966 (Closed): QGIS crashes when in Mapserver Export
Duplicate of #2870 Paolo Cavallini
01:23 AM Bug report #2842 (Closed): OSX Print Composer Crash
Closing it pending user feedback. Please reopen it if necessary. Paolo Cavallini
01:23 AM Bug report #2842 (Closed): OSX Print Composer Crash
Closing it pending user feedback. Please reopen it if necessary. Paolo Cavallini
01:15 AM Bug report #2339: QGis crashes when moving border between map canvas and overview map and "use re...
Might be due to Qt? Could you please try again with current trunk, and report which Qt version you use? Paolo Cavallini
01:11 AM Bug report #1944: Cannot upload more than one changed node with OSM provider
No further reports: is this confirmed? Paolo Cavallini
01:10 AM Bug report #2960 (Closed): Qgis crashes when building pyramids
Closing it, pending user feedback. Please reopen it if still true. Paolo Cavallini
01:10 AM Bug report #2960 (Closed): Qgis crashes when building pyramids
Closing it, pending user feedback. Please reopen it if still true. Paolo Cavallini
01:07 AM Bug report #2204: Crashing QGIS when add new raster layer ecw
Could you please test it again with new gdal ecw driver? Paolo Cavallini
04:40 PM Feature request #1899: Nested Grouping in Layer Tree
Thanks, the nested groups are great.
Personally I think the behaviour suggested by Michele is more useful and more i...
Alister Hood
01:01 PM Bug report #3144 (Closed): Line decorations (arrow heads) turn out too big in printing/exporting ...
Fixed in commit:8ca991c0 (SVN r14429) Martin Dobias
01:01 PM Bug report #3144 (Closed): Line decorations (arrow heads) turn out too big in printing/exporting ...
Fixed in commit:8ca991c0 (SVN r14429) Martin Dobias
12:46 PM Bug report #3147 (Closed): QGIS crashes when set pen width
fixed in commit:9f7ed1ec (SVN r14428) (there must be always at least one symbol layer for a valid symbol) Martin Dobias
12:46 PM Bug report #3147 (Closed): QGIS crashes when set pen width
fixed in commit:9f7ed1ec (SVN r14428) (there must be always at least one symbol layer for a valid symbol) Martin Dobias
11:29 AM Bug report #3145: Dash in plugin name causes unhelpful error message
Replying to [comment:2 rehakv1]:
> Yes, I figured this out and renamed my plugin folder. I also removed the version n...
Giuseppe Sucameli
10:59 AM Bug report #3145: Dash in plugin name causes unhelpful error message
> You should rename your plugin folder and package to "dash_test" because the chars after the dash in the package nam... Václav Řehák
10:53 AM Feature request #3138: Add plugin autopackaging script
I would add:
* we need cooperative platform to let one or more maintainer group plugins under a reasonable number of ...
Paolo Cavallini
08:08 AM Bug report #3149 (Closed): 3D coordinates export fails with ftools
I had some problems with a shapefile in qgis. This shape includes 3D GPS points. When using :
Vector/Geometry Tools/E...
estelle -
05:32 AM Bug report #3148 (Closed): ftools, buffering: error in shapefile writing
this is a more general issue, because QGIS fails to save shapefiles when there are conflicts in field names after DBF... Alessandro Pasotti

2010-10-21

01:58 AM Bug report #3099: Projection Failure
I loaded . The 4 vector projections now import in the correct location so thats a good start.
Projections are not st...
badams -
01:25 AM Bug report #3147: QGIS crashes when set pen width
confirmed under Ubuntu 10.04/trunk Giovanni Manghi
11:20 PM Bug report #3147 (Closed): QGIS crashes when set pen width
1. Open any vector line layer;
2. Properties - New Symbology - Single Symbol - Properties;
3. Remove all symbol lay...
dr -
03:19 PM Bug report #3146 (Closed): Erase button always disabled
um, this still a duplicate of #1446 - just like #3070. Jürgen Fischer
03:19 PM Bug report #3146 (Closed): Erase button always disabled
um, this still a duplicate of #1446 - just like #3070. Jürgen Fischer
02:41 PM Bug report #3146 (Closed): Erase button always disabled
In the property layer, in the attribute window the
icon (button) remove column is always disabled.
So is impossible t...
aperi2007 -
01:24 PM Bug report #3145: Dash in plugin name causes unhelpful error message
Replying to "rehakv1":/issues/show/3145:
> I encountered a problem with using a '-' sign (dash) in python plugin in 1...
Giuseppe Sucameli
12:48 PM Bug report #3145 (Closed): Dash in plugin name causes unhelpful error message
I encountered a problem with using a '-' sign (dash) in python plugin in 1.6 r14423. When I add my custom repository ... Václav Řehák
12:20 PM Feature request #3135: GRASS analyses on the fly
Addition: the point is that the GRASS toolbox is only accessible when running
a GRASS session. Each GRASS installatio...
Markus Neteler
09:01 AM Bug report #3142: ubuntu grass dependency (Ubuntu Maverick)
you could make it depend of grass640+42329 OR grass (>= 6.4.0) olivier -
05:58 AM Bug report #3142 (Closed): ubuntu grass dependency (Ubuntu Maverick)
The nightly builds only use the "official" repositories from debian and ubuntu - mainly to test if qgis builds there.... Jürgen Fischer
05:58 AM Bug report #3142 (Closed): ubuntu grass dependency (Ubuntu Maverick)
The nightly builds only use the "official" repositories from debian and ubuntu - mainly to test if qgis builds there.... Jürgen Fischer
02:14 AM Bug report #3142 (Closed): ubuntu grass dependency (Ubuntu Maverick)
The qgis-plugin-grass package from http://qgis.org/debian-nightly depends on GRASS 6.4.0 RC6 (grass640+42329) while t... olivier -
08:12 AM Feature request #3138: Add plugin autopackaging script
I will list here some of my expectations regarding the new centralized plugin repository - and related to it - some e... Andreas Neumann
04:22 AM Bug report #3144 (Closed): Line decorations (arrow heads) turn out too big in printing/exporting ...
Arrow heads turn out much bigger in print/exported PDF than they appeared in print composer. Anita Graser
03:19 AM Bug report #3143 (Closed): New Label Engine: ony integer values allowed for font-size in map units
In the new label engine one can choose between font-size in points or in map units. For font-sizes in map units it is... Andreas Neumann

2010-10-20

12:24 AM Feature request #879 (Feedback): Add 'Help contents' in different languages
I confirm, it does not work in other languages than English. Care should be taken to keep the index pages upadted, th... Paolo Cavallini
12:24 AM Feature request #879 (Feedback): Add 'Help contents' in different languages
I confirm, it does not work in other languages than English. Care should be taken to keep the index pages upadted, th... Paolo Cavallini
12:21 AM Feature request #1468: Inconsistency in Attribute table tools
Seems an useful patch. Any reasons not to apply it for 1.6? Paolo Cavallini
01:25 PM Feature request #2991 (Closed): Patch for data defined label position in new labeling
Marco,
finally I've looked at the patch and it looks fine. As I don't know when exactly you return from your holiday...
Martin Dobias
01:25 PM Feature request #2991 (Closed): Patch for data defined label position in new labeling
Marco,
finally I've looked at the patch and it looks fine. As I don't know when exactly you return from your holiday...
Martin Dobias
10:25 AM Feature request #782: color ramps for raster layers
The plugin improved REALLY MUCH, thanks Benoit.
I really hope that someone can step in and help because this would r...
Giovanni Manghi
10:16 AM Bug report #3141 (Closed): Georeferencer transformation type dropdown menu is incorrect
If choose Polynomial 3 type and press OK, message "Polynomial 3 requires at least 1 GCPs. Please define more" appears... dr -
07:25 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
Apparently the problem has been solved in GDAL 1.7. The method in QGIS should then be updated. See http://trac.osgeo.... Paolo Cavallini
06:26 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
http://trac.osgeo.org/gdal/ticket/3796 Paolo Cavallini
05:57 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
If this is fixed in OGR we need to keep in mind to adapt http://trac.osgeo.org/qgis/browser/trunk/qgis/src/core/qgsve... Jürgen Fischer
05:53 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
If the ticket is filed against GDAL, I can have Chaitanya look into clean logic for disambiguation for shortened names. Frank Warmerdam -
05:27 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
I mean: the lack of a proper truncation method, adding a serial in case of too long field names, may be a limitation ... Paolo Cavallini
04:59 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
Replying to "pcav":/issues/show/3137:
> and export fails. It seems a limitation of OGR, but perhaps we could be smart...
Jürgen Fischer
07:17 AM Bug report #3140 (Closed): Download data from GPS doesn't work
I try to download my data from GPS through GPS tool and get an error "The layer is not a valid layer and can not be a... dr -
05:12 AM Bug report #3134 (Closed): Coordinate Reference System Selector dialog box should indicate which ...
Giovanni Manghi
04:18 AM Feature request #3139 (Closed): [Patch] Custom query for the spatialite provider
This patch enhances the spatialite provider capabilities allowing users to load a spatialite layer using a custom que... Giuseppe Sucameli

2010-10-19

01:38 AM Bug report #3137: Save as shapefile fails if field names are longer than 10 characters
BTW, the external plugin Table Manager fails to rename the fields, hanging QGIS Paolo Cavallini
12:36 AM Bug report #3137 (Closed): Save as shapefile fails if field names are longer than 10 characters
If I try to save the attached [[MapInfo]] file, I get:... Paolo Cavallini
12:47 AM Feature request #3138 (Closed): Add plugin autopackaging script
The current situation with plugins is rather confusing for the user: many repos, not all of them available all the ti... Paolo Cavallini
09:38 PM Feature request #3136 (Closed): Update NZ projections for grid transformation support
applied in . Thanks Jeremy. Jürgen Fischer
09:38 PM Feature request #3136 (Closed): Update NZ projections for grid transformation support
applied in . Thanks Jeremy. Jürgen Fischer
04:45 PM Feature request #3136 (Closed): Update NZ projections for grid transformation support
This SQL update script modifies the srs.db proj4 parameters so that the NZGD49<->NZGD2000 transformation grid is used... Jeremy Palmer
10:26 AM Bug report #3132 (Feedback): Field calculator cannot calculates area of polygon
I've tried use real field but get the same negative result. dr -
10:26 AM Bug report #3132 (Feedback): Field calculator cannot calculates area of polygon
I've tried use real field but get the same negative result. dr -
10:11 AM Bug report #3132 (Closed): Field calculator cannot calculates area of polygon
That's what you get when you try to save 2849751229.32861 in a 32bit integer. Use a real field. Jürgen Fischer
10:11 AM Bug report #3132 (Closed): Field calculator cannot calculates area of polygon
That's what you get when you try to save 2849751229.32861 in a 32bit integer. Use a real field. Jürgen Fischer
08:48 AM Bug report #3132: Field calculator cannot calculates area of polygon
I'm afraid I have to take it back, I do have negatives too, please check this video:
http://screencast.com/t/58exsAG3vz
Maxim Dubinin
08:02 AM Bug report #3132: Field calculator cannot calculates area of polygon
commit:0c31b555 (SVN r14411), tried new and existing AREA field - all seems normal (result is correct) Maxim Dubinin
07:32 AM Bug report #3132: Field calculator cannot calculates area of polygon
um, I get 2849751229.32861 - just like in the identify results. And the earlier problem wasn't that the area wasn't c... Jürgen Fischer
06:25 AM Bug report #3132 (Feedback): Field calculator cannot calculates area of polygon
Now area of this polygon is negative value. dr -
06:25 AM Bug report #3132 (Feedback): Field calculator cannot calculates area of polygon
Now area of this polygon is negative value. dr -
06:52 AM Bug report #2950 (Closed): Qgis crashes opening attribute form if the layer has no attributes
fixed in . Jürgen Fischer
06:52 AM Bug report #2950 (Closed): Qgis crashes opening attribute form if the layer has no attributes
fixed in . Jürgen Fischer
06:34 AM Bug report #2965 (Closed): error message initializing Qgis 1.5.0
Known issue. Please try again with the new standalone installer, and reopn the ticket if necessary. Paolo Cavallini
06:34 AM Bug report #2965 (Closed): error message initializing Qgis 1.5.0
Known issue. Please try again with the new standalone installer, and reopn the ticket if necessary. Paolo Cavallini
06:32 AM Bug report #2960: Qgis crashes when building pyramids
Still true? Which version of GDAL? Paolo Cavallini
06:06 AM Feature request #3135 (Closed): GRASS analyses on the fly
It would be good to have another option for running GRASS analyses on the fly:
* creating a location on the basis of ...
Paolo Cavallini

2010-10-18

12:29 AM Bug report #3134: Coordinate Reference System Selector dialog box should indicate which layer it ...
fixed in commit:6b375425 (SVN r14413). Jürgen Fischer
04:01 PM Bug report #3134 (Closed): Coordinate Reference System Selector dialog box should indicate which ...
If you have set up qgis to "Prompt for CRS" when the CRS is unknown to qgis and you select several files, you will be... cgsbob -
01:11 PM Feature request #2832: rule-based renderer in symbology-ng should show rules in legend
I have partially applied the patch in - show rules in legend. I've kept back the part regarding the symbol levels. T... Martin Dobias
12:45 PM Feature request #3104: New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Replying to [comment:6 lutra]:
> Hi,
>
> the browse button if the "name of new location to create" seems does not al...
Markus Neteler
12:45 PM Bug report #3099: Projection Failure
commit:6308416a (SVN r14400) add the possibility for user defined proj.4 paths and updates the srs.db to include refe... Jürgen Fischer
12:00 PM Feature request #2963 (Closed): Fix crash using the quantile function in v2 symbol renderer
Applied in commit:9b287cef (SVN r14399). Thanks for contributing! Martin Dobias
12:00 PM Feature request #2963 (Closed): Fix crash using the quantile function in v2 symbol renderer
Applied in commit:9b287cef (SVN r14399). Thanks for contributing! Martin Dobias
10:06 AM Bug report #3133: Menus too large for small screens
some here in Dell mini 9. Qgis works really fine, it would just need menu windows to be resized in order to fit small... Giovanni Manghi
10:02 AM Bug report #3133 (Closed): Menus too large for small screens
I'm using QGIS with an HP 110c mini netbook (because GIS should be portable too), with a screen resolution 1024x600. ... Bill Morris
02:25 AM Feature request #2987: Auto GCP detection library
Just to clarify, I meant cross-referencing and not georeferencing in my previous reply. Sorry goocreations -
02:21 AM Feature request #2987: Auto GCP detection library
Replying to [comment:12 jamesm6162]:
> Hi Tim
>
> Thanks for the feedback. We are working on getting all the crashes...
Tim Sutton
02:08 AM Feature request #2987: Auto GCP detection library
Regarding the error received from georeferencing the images, I will have a look into this. As far as I can see now, t... goocreations -
02:04 AM Feature request #2987: Auto GCP detection library
The version from the repository and the about dialog are now in sync. Sorry about that. goocreations -

2010-10-17

01:22 AM Feature request #2987: Auto GCP detection library
Hi Tim
Thanks for the feedback. We are working on getting all the crashes fixed adn we'll get to all your recommende...
jamesm6162 -
01:02 AM Feature request #2987: Auto GCP detection library
Hi
I upgraded both the lib parts and the plugin parts. A couple of new comments:
- it would be nice to persist the ...
Tim Sutton
12:47 AM Feature request #2987: Auto GCP detection library
Hi
I grabbed the new version thanks. The plugin help->about version shows as 0.4, while the listing on http://pyqgis...
Tim Sutton
12:39 AM Feature request #3067: Support DBF table as datasource
Replying to [comment:5 jef]:
> It's just that the delimited *text* provider doesn't.
yes, this is what I meant. Do...
Giovanni Manghi
12:25 PM Feature request #3067: Support DBF table as datasource
Replying to [comment:4 neteler]:
> I hope that the unfortunate decision of Microsoft to drop DBF from MS Office 2007 ...
Jürgen Fischer
09:30 AM Feature request #3067: Support DBF table as datasource
I hope that the unfortunate decision of Microsoft to drop DBF from MS Office 2007 is not
dictating what QGIS offers -...
Markus Neteler
03:50 AM Feature request #3067: Support DBF table as datasource
DBFs can be added as geometryless layers. Jürgen Fischer
02:52 AM Feature request #3067 (Closed): Support DBF table as datasource
Also DBF has been dropped from Ms Office already in MS Office 2007. Reopen if necessary. Giovanni Manghi
02:52 AM Feature request #3067 (Closed): Support DBF table as datasource
Also DBF has been dropped from Ms Office already in MS Office 2007. Reopen if necessary. Giovanni Manghi
12:36 AM Bug report #3116 (Closed): QGis makes X crash and go back to login screen
Yep, same problem with another QT apps.
Closing this one..
Luca Casagrande
12:36 AM Bug report #3116 (Closed): QGis makes X crash and go back to login screen
Yep, same problem with another QT apps.
Closing this one..
Luca Casagrande
12:35 AM Bug report #3131: GRASS toolbox: v.in.ogr.qgis.loc shows 100% while still creating topology
this happens in many modules. Giovanni Manghi
09:37 AM Bug report #3131 (Closed): GRASS toolbox: v.in.ogr.qgis.loc shows 100% while still creating topology
v.in.ogr.qgis.loc shows 100% while still creating topology. However,
the "Interrupt" ("Interrompi" in italiano) butto...
Markus Neteler
12:16 AM Feature request #1899: Nested Grouping in Layer Tree
Unsure: to me the current behaviour seems correct Paolo Cavallini
12:06 AM Feature request #1899: Nested Grouping in Layer Tree
Thanks, very nice and useful feature!
Let me suggest a little improvement:
If I check (set visible=yes) a group of...
michele zanolli
05:14 PM Feature request #1899: Nested Grouping in Layer Tree
applied in commit:0c5ebf7c (SVN r14395). Jürgen Fischer
05:40 PM Bug report #3132 (Closed): Field calculator cannot calculates area of polygon
fixed in commit:650abbb9 (SVN r14396). Jürgen Fischer
05:40 PM Bug report #3132 (Closed): Field calculator cannot calculates area of polygon
fixed in commit:650abbb9 (SVN r14396). Jürgen Fischer
04:23 PM Bug report #3132 (Closed): Field calculator cannot calculates area of polygon
I have vector layer, which contains one polygon. When I try to calculate their area with field calculator I get NULL ... dr -
07:19 AM Bug report #3130 (Closed): Internal SVG resources not selectable on OS X
When asked to choose an SVG file for symbology (one place I ran into this, there may be others), it's a normal file c... William Kyngesburye
03:57 AM Bug report #2544 (Closed): shape export with custom CRS
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:57 AM Bug report #2544 (Closed): shape export with custom CRS
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:49 AM Feature request #3124: Add 'Apply' button to the layer's query function
Replying to [comment:3 jef]:
> Sorry, I wasn't able to reproduce that problem. The only problem there was, was that ...
Jean-Roc Morreale
02:55 AM Feature request #3124 (Closed): Add 'Apply' button to the layer's query function
Replying to [comment:2 jrm]:
> sorry I've not been clear, the problem is that if you want to extend your query beyond...
Jürgen Fischer
02:55 AM Feature request #3124 (Closed): Add 'Apply' button to the layer's query function
Replying to [comment:2 jrm]:
> sorry I've not been clear, the problem is that if you want to extend your query beyond...
Jürgen Fischer
02:25 AM Feature request #3124 (Feedback): Add 'Apply' button to the layer's query function
Hi Jef,
sorry I've not been clear, the problem is that if you want to extend your query beyond an existing queried ...
Jean-Roc Morreale
02:25 AM Feature request #3124 (Feedback): Add 'Apply' button to the layer's query function
Hi Jef,
sorry I've not been clear, the problem is that if you want to extend your query beyond an existing queried ...
Jean-Roc Morreale
03:42 AM Bug report #3049: GdalTools: merging images with different colormaps
see also
http://trac.osgeo.org/gdal/ticket/3707
Giovanni Manghi
03:31 AM Bug report #3126: Sliver holes remain after dissolve
The original shapefile has already slivers, do you expect the dissolve tool to fix them? It seems to be so geometrica... Giovanni Manghi
03:10 AM Bug report #3034: new symbology: quite slow at opening Symbol properties
I can confirm it too. +1 for removing it before the 1.6 release, as it makes the new symbology usage extremaly painfu... Borys Jurgiel
03:02 AM Bug report #3034: new symbology: quite slow at opening Symbol properties
it is possible to reomove this symbol? on slow computers the lag is very annoying. Giovanni Manghi
03:09 AM Bug report #3007 (Closed): Unstable Qgis 1.5
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:09 AM Bug report #3007 (Closed): Unstable Qgis 1.5
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:01 AM Bug report #3037 (Closed): Installer bug: QGIS-OSGeo4W-1.5.0-14109-Setup (Windows)
closing for lack of feedback, reopen if necessary. Giovanni Manghi
03:01 AM Bug report #3037 (Closed): Installer bug: QGIS-OSGeo4W-1.5.0-14109-Setup (Windows)
closing for lack of feedback, reopen if necessary. Giovanni Manghi
02:48 AM Bug report #3078: Scotese's shapefiles causes Tethys to crash
it is confirmed, the shapefile is pretty "dirty", you can confirm by importing it in GRASS and you'll see a lot of sl... Giovanni Manghi
02:22 AM Bug report #3125 (Closed): Problems outputing a layout with small labels to PDF
This seems to me duplicate of #3058.
If you set the font units in map units you can get the labels printed correctly...
Giovanni Manghi
02:22 AM Bug report #3125 (Closed): Problems outputing a layout with small labels to PDF
This seems to me duplicate of #3058.
If you set the font units in map units you can get the labels printed correctly...
Giovanni Manghi
02:21 AM Bug report #3058: print composer: exporting to PDF does not resize correctly vectors if symbology...
see also #3125 Giovanni Manghi
02:13 AM Bug report #3025 (Closed): OSM Plugin: error adding a layer
Hi,
I had the same problem/message (see #3076) but I've just recompiled and now it all works fine. Reopen if necessary.
Giovanni Manghi
02:13 AM Bug report #3025 (Closed): OSM Plugin: error adding a layer
Hi,
I had the same problem/message (see #3076) but I've just recompiled and now it all works fine. Reopen if necessary.
Giovanni Manghi
02:11 AM Bug report #3076 (Closed): OSM plugin: python error clicking on "load OSM from file"
Just recompiled from source and this error seems to be gone. Giovanni Manghi
02:11 AM Bug report #3076 (Closed): OSM plugin: python error clicking on "load OSM from file"
Just recompiled from source and this error seems to be gone. Giovanni Manghi

2010-10-16

01:53 AM Feature request #3129 (Closed): new symbology: add option for data driven colors
See also the first part of #3127
The column could store a R:G:B string.
Giovanni Manghi
12:19 AM Feature request #3128 (Open): support for vertical datum
Hi,
vertical datum support has recently been added to the trunk versions of most of the PROJ.4/GDAL/libLAS/etc toolc...
hamish -
12:15 AM Feature request #3127 (Open): support GRASS color rules
I see qgis has just got some better graduated symbol/color improvements,
great! that's been lacking for a long time. ...
hamish -
04:11 PM Bug report #3126 (Closed): Sliver holes remain after dissolve
1. Open shapefile
http://gis-lab.info/forum/download/file.php?id=1794
2. Vector\\Geoprocessing\\Dissolve
Results...
Maxim Dubinin
03:47 PM Bug report #3125 (Closed): Problems outputing a layout with small labels to PDF
1. Open attached project. http://gis-lab.info/forum/download/file.php?id=1836
2. Print to PDF
3. Open PDF
Resulting ...
Maxim Dubinin
03:10 PM Feature request #3124 (Closed): Add 'Apply' button to the layer's query function
With commit:be8ab616 (SVN r14387) is now left in the last successfully tested state. Jürgen Fischer
03:10 PM Feature request #3124 (Closed): Add 'Apply' button to the layer's query function
With commit:be8ab616 (SVN r14387) is now left in the last successfully tested state. Jürgen Fischer
01:57 PM Feature request #3124 (Closed): Add 'Apply' button to the layer's query function
The use of the layer's 'Query' function is difficult when used frequently : if you make a query than choose to modify... Jean-Roc Morreale
10:51 AM Bug report #3116: QGis makes X crash and go back to login screen
So I would say the problem it's outside QGIS: does this happen with other Qt apps that use graphical acceleration? If... Paolo Cavallini
10:33 AM Bug report #3116: QGis makes X crash and go back to login screen
* The same thing happens using QGis 1.4.0 from official repository with a fresh new install.
* Removing ATI driver s...
Luca Casagrande
03:27 AM Bug report #3116: QGis makes X crash and go back to login screen
This might be due to qt 4.7.
Did you compile it by hand, anginst the proper qt-dev?
Paolo Cavallini
02:08 AM Bug report #3116 (Closed): QGis makes X crash and go back to login screen
Just start QGis and use the zoom tool to draw some rectangle (also with no layers).
X crashes and goes back to login ...
Luca Casagrande
09:37 AM Feature request #3123 (Closed): add wildfire modeling commands to the GRASS toobox
r.ros
r.spreadpath
r.spread
Giovanni Manghi
09:34 AM Feature request #3122 (Closed): show map units in the field calculator
summary says it all. Giovanni Manghi
09:30 AM Feature request #3104 (Feedback): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
So, reopening it for further testing and improvements Paolo Cavallini
09:30 AM Feature request #3104 (Feedback): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
So, reopening it for further testing and improvements Paolo Cavallini
09:05 AM Feature request #3104: New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Hi,
the browse button if the "name of new location to create" seems does not allows to select folders (as expected) ...
Giovanni Manghi
06:27 AM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied in commit:eb6d1b3d (SVN r14384) Paolo Cavallini
06:27 AM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied in commit:eb6d1b3d (SVN r14384) Paolo Cavallini
09:27 AM Feature request #3121 (Closed): print composer: allow generating the legend classes of only the v...
this is like the "show only visible features" in the table of attributes object. Giovanni Manghi
09:25 AM Bug report #3027: print composer: "show only visibile features" doesn't work when unchecked?
I notice also the following.
When adding a table of attributes in the composer the object is always added with the "...
Giovanni Manghi
09:01 AM Bug report #3119: actions not working if local OS is not "en" and "override system locale" (to en...
It is reproducable at least with qgis installed on windows in portuguese. We used shapefiles, regardless the column n... Giovanni Manghi
07:20 AM Bug report #3119: actions not working if local OS is not "en" and "override system locale" (to en...
no reproducable with trunk.
Although I noticed that %column is case-sensitive and the attribute of my test shape wer...
Jürgen Fischer
05:34 AM Bug report #3119 (Closed): actions not working if local OS is not "en" and "override system local...
take an OS not in english, and install QGIS localized as the OS.
Actions will not work, as the value of the %column ...
Giovanni Manghi
05:41 AM Bug report #3120 (Closed): Replace list of donors with link
The list of donors has been replaced with the link: http://qgis.org/en/sponsorship/donors.html
So the formatting shou...
Paolo Cavallini
03:45 AM Bug report #3099: Projection Failure
see also #3118 Giovanni Manghi
03:08 AM Bug report #3099: Projection Failure
Hi Brett, I'm resuming what would be needed for both the vector and raster dialogs. see here
https://trac.osgeo.org/...
Giovanni Manghi
03:44 AM Feature request #2913: add support for ntv2 grids and +towgs84 parameters in the "save as..." dia...
see also #3118 Giovanni Manghi
03:05 AM Feature request #2913: add support for ntv2 grids and +towgs84 parameters in the "save as..." dia...
Follow up description, more resumed and clear (I hope):
I would like to resume better what would be needed to ad...
Giovanni Manghi
03:44 AM Feature request #3118 (Closed): GdalTools (warp): add support for ntv2 grid and +towgs84 transfor...
Hi Giuseppe, this is the new description for the old ticket available in the gdal tools tracker.
https://trac.faunal...
Giovanni Manghi
03:34 AM Bug report #3117: GPS live tracking does not work for me
quick googling seems to indicate that the mtk uses a proprietary binary protocol. Have you tried using the unit thro... Jürgen Fischer
03:24 AM Bug report #3117 (Closed): GPS live tracking does not work for me
Attaching a mtk data logger, I get from dmesg:
usb 2-1: cp210x converter now attached to ttyUSB0
but I cannot con...
Paolo Cavallini

2010-10-15

01:23 AM Feature request #3104: New GRASS Location creator from .prj (WKT) file in QGIS (patch)
to be committed asap as 1.6 is shipping soon as stated here
http://lists.osgeo.org/pipermail/qgis-developer/2010-Oc...
Giovanni Manghi
02:29 AM Feature request #3104: New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Wish: since these patches are rather trivial, please also update the 1.5 release
branch since I cannot use trunk in ...
Markus Neteler
02:27 AM Feature request #3104 (Feedback): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
I have attached some missing r.external icons - please fix.
Furthermore, I have made a series of improvements to the...
Markus Neteler
02:27 AM Feature request #3104 (Feedback): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
I have attached some missing r.external icons - please fix.
Furthermore, I have made a series of improvements to the...
Markus Neteler
09:12 AM Feature request #2987: Auto GCP detection library
Sorry about this. We never uploaded version 0.2 to the online repository.
The new version (0.3) is now up to date on ...
goocreations -
07:18 AM Feature request #2987: Auto GCP detection library
Can you verify that the current python plugin version is 0.3? The plugin manager shows only 0.2 available, but the ve... Tim Sutton
05:45 AM Bug report #3115 (Closed): Old project layer got lost after installing plug ins and updating
My old project file rastar layer is not appering after installing plug ins and updating the program, i can open the s... candane -
04:48 AM Bug report #3114 (Closed): Digitizing issue whith attribute updates when "Avoid intersection" and...
It appears that if
* shared (topological) editing and
* avoid intersection is active in a polygon layer
and the use...
Andreas Neumann
04:45 AM Bug report #3057: Attribute Index out of sync with data source when datasource was modified outsi...
It appears that attributes get reread correctly, but the aliases can get out of sync. I may need to do more investiga... Andreas Neumann

2010-10-14

06:08 AM Feature request #3113 (Closed): GDAL Tools: enable Clipper also for WMS layers
GDAL supports WMS layers: http://www.gdal.org/frmt_wms.html.
It would be good to enable clipping also for these layers.
Paolo Cavallini
04:15 AM Bug report #3109: switching layers does not work
same for me - the bug still exists on Windows OSGeo build commit:12a404a6 (SVN r14379).
On Ubuntu Lucid 64bit, the p...
Andreas Neumann
04:07 AM Bug report #3099: Projection Failure
Hi Lutra,
Sorry for the slow response. Needed to run some trials.
The 1.3m variation between your conversion and min...
badams -
03:20 AM Feature request #62: Qgis only supports postgres keys of type int
> The feature ids are necessary to identify which feature is to be deleted or updated. The table/view is not only qu... willfurnass -

2010-10-13

01:19 AM Bug report #3112 (Open): Plugin Offline editing: warn if copying views
[[PostgreSQL]] views can be synced for offline use, but obviously the syncing back to [[PostgreSQL]] fails: I think t... Paolo Cavallini
01:08 AM Bug report #3109 (Feedback): switching layers does not work
It still happens in commit:12a404a6 (SVN r14379) (possibly less often than before) Paolo Cavallini
01:08 AM Bug report #3109 (Feedback): switching layers does not work
It still happens in commit:12a404a6 (SVN r14379) (possibly less often than before) Paolo Cavallini
01:54 PM Bug report #3109 (Closed): switching layers does not work
fixed in commit:1684936b (SVN r14378). Jürgen Fischer
01:54 PM Bug report #3109 (Closed): switching layers does not work
fixed in commit:1684936b (SVN r14378). Jürgen Fischer
10:38 AM Bug report #3109 (Closed): switching layers does not work
Deactivating a layer often does not result in the layer being switched off from the canvas
Paolo Cavallini
12:21 AM Bug report #3111 (Closed): filtering of shapefile with query builder not working when using 'excl...
Wow, turns out the shapefile had - unknown to me until now - duplicates of a number of polygons, including the one I ... Mathieu Pellerin - nIRV
12:21 AM Bug report #3111 (Closed): filtering of shapefile with query builder not working when using 'excl...
Wow, turns out the shapefile had - unknown to me until now - duplicates of a number of polygons, including the one I ... Mathieu Pellerin - nIRV
12:06 AM Bug report #3111: filtering of shapefile with query builder not working when using 'excluding' query
Please include a shapefile and report the OGR version you are using. Jürgen Fischer
09:36 PM Bug report #3111: filtering of shapefile with query builder not working when using 'excluding' query
Sorry, first query should be:
id = 1 OR id = 2 OR id = 3
Need some sleep...
Mathieu Pellerin - nIRV
09:35 PM Bug report #3111 (Closed): filtering of shapefile with query builder not working when using 'excl...
Let's say you have 4 polygons in a shapefile
|| id || name ||
|| 0 || polygon-a ||
|| 1 || polygon-b ||
|| 2 || p...
Mathieu Pellerin - nIRV
01:52 PM Bug report #3110 (Closed): Missing colours from layers list
fixed in commit:ec7117f2 (SVN r14377). Jürgen Fischer
01:52 PM Bug report #3110 (Closed): Missing colours from layers list
fixed in commit:ec7117f2 (SVN r14377). Jürgen Fischer
10:40 AM Bug report #3110 (Closed): Missing colours from layers list
The colours of the layers do not show on the layers list. See attached. Paolo Cavallini
09:01 AM Feature request #3108 (Closed): Add to gdal 1.7 support for MrSID
oops ,sorry
uncorrect place.
This was to add to osgeo bug-list.
aperi2007 -
09:01 AM Feature request #3108 (Closed): Add to gdal 1.7 support for MrSID
oops ,sorry
uncorrect place.
This was to add to osgeo bug-list.
aperi2007 -
08:55 AM Feature request #3108 (Closed): Add to gdal 1.7 support for MrSID

The qgis-dev version don't support [[MrSid]] rasters.
I try using a version of gdal 1.7 with the "gdal_MrSID.dll",
...
aperi2007 -

2010-10-12

12:05 AM Bug report #3107 (Closed): Color Scale Bar does not find the colour table or QML file
This trac covers internal plugins only. We're thinking about third party plugins trac :) Borys Jurgiel
12:05 AM Bug report #3107 (Closed): Color Scale Bar does not find the colour table or QML file
This trac covers internal plugins only. We're thinking about third party plugins trac :) Borys Jurgiel
09:15 AM Bug report #3107 (Closed): Color Scale Bar does not find the colour table or QML file
1. It seems that the plugin requires a *.tbl or *.qml file for the "Open a colour table or QML file" dialog, yet the ... alobo -
08:10 AM Bug report #1752: Font label settings not working on OS X
More:
Also happens with trunk, OSX 10.6.
OSX 10.5 PPC Qt 4.6 Carbon: uses Qgis/Qt font dialog and font selection se...
William Kyngesburye
07:41 AM Bug report #1752 (Feedback): Font label settings not working on OS X
Either it wasn't really fixed, or it's back. Reported in #3105. It goes beyond vectors (maybe this originally did, ... William Kyngesburye
07:41 AM Bug report #1752 (Feedback): Font label settings not working on OS X
Either it wasn't really fixed, or it's back. Reported in #3105. It goes beyond vectors (maybe this originally did, ... William Kyngesburye
07:41 AM Bug report #3105 (Closed): Fonts in Composer not able to be changed from default (mac)
This appears to be a duplicate and expansion of #1752. William Kyngesburye
07:41 AM Bug report #3105 (Closed): Fonts in Composer not able to be changed from default (mac)
This appears to be a duplicate and expansion of #1752. William Kyngesburye
04:22 AM Bug report #3106 (Closed): bug by running Quantum GIS
probably a duplicate of [[osgeo4w #3938]] Jürgen Fischer
04:22 AM Bug report #3106 (Closed): bug by running Quantum GIS
probably a duplicate of [[osgeo4w #3938]] Jürgen Fischer
04:17 AM Bug report #3106 (Closed): bug by running Quantum GIS
Error message by running Quantum GIS (translation from German):
qgis.exe - "Order number 3109 has not been found in "...
delucis -

2010-10-11

01:52 AM Feature request #2987: Auto GCP detection library
Please also make sure to download the updated [[AutoGCP]] plugin from the repository http://pyqgis.org/repo/contribut... jamesm6162 -
09:23 PM Bug report #3105 (Closed): Fonts in Composer not able to be changed from default (mac)
Hi,
using Tethys 1.5.0 on mac OS10.6.4 Macbook with 2GHz Intel I find I'm not able to change the font in the Map Comp...
CK -
03:48 PM Feature request #62: Qgis only supports postgres keys of type int
Replying to [comment:17 willfurnass]:
> It would also be nice if [[PostGIS]] sequences could be used for layer keys. ...
Jürgen Fischer
08:07 AM Feature request #62: Qgis only supports postgres keys of type int
It would also be nice if [[PostGIS]] sequences could be used for layer keys.
I frequently wish to view the result ...
willfurnass -

2010-10-10

11:39 PM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied with slight change in commit:f7bf1a58 (SVN r14364). Thank you Markus! Paolo Cavallini
11:39 PM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
Applied with slight change in commit:f7bf1a58 (SVN r14364). Thank you Markus! Paolo Cavallini
11:30 AM Feature request #3104 (Closed): New GRASS Location creator from .prj (WKT) file in QGIS (patch)
This patch enables QGIS users to more easily generate new
GRASS locations. It should lower the barrier to use GRASS
...
Markus Neteler
09:52 PM Bug report #2880: makefiles not parallel building proof
The 1.5.0 source won't build with anything above -j1 for me. Makes development work a bit tedious as it takes a good... sharpie -
07:20 AM Bug report #3099: Projection Failure
Lutra,
I'll need some time to digest this but I'll have a go.
The proposed projections are correct. I've been playin...
badams -
04:35 AM Feature request #3103 (Closed): interpolation plugin could have better documentation
It would be very helpful to improve the qgis documentation regarding the interpolation plugins - what's the meaning o... andre mano

2010-10-09

01:39 AM Bug report #3099: Projection Failure
Supposing that the grids you linked are the right ones for the the geographic area of your interest (amg zone 51, but... Giovanni Manghi
06:52 PM Bug report #3099: Projection Failure
Sorry Lutra, I don't know how the transformation process works. Can't help you with that.
badams -
09:10 AM Bug report #3099: Projection Failure
Ok, this is a start. Now I just miss to know what kind of transformation are supposed to do the grids (the gsb files)... Giovanni Manghi
09:07 AM Bug report #3099: Projection Failure
Lutra, I think these are the codes your chasing
EPSG codes as listed in QGIS are as follows;
AGD66 / AMG zone51: 20...
badams -
03:54 AM Bug report #3099: Projection Failure
> The projections already exist in QGIS, you don't need to change anything. Forget about the srs.db and gsb files fo... Giovanni Manghi
02:41 AM Bug report #3099: Projection Failure
Sorry Lutra, I actually have no idea what your talking about. I'm way out of my depth here.
The test is simple. The ...
badams -
11:00 AM Feature request #3102 (Open): GRASS extension: Add "Update to current QGIS region" button to GRAS...
It would be nice to have a button in the upper N/S/W/E subwindow
which updates these values to the current QGIS view....
Markus Neteler
06:30 AM Bug report #3100 (In Progress): GDAL tools crash QGIS when a layer is removed from the canvas
Confirmed on Ubuntu 9.10/trunk
After you come back to the plugin window, select a different input file (select butto...
Giuseppe Sucameli
02:54 AM Bug report #3100: GDAL tools crash QGIS when a layer is removed from the canvas
Confirmed on Ubuntu/trunk - not immediately after coming back to the plugin window, but after some clicking it crashes. Borys Jurgiel
02:28 AM Bug report #3100: GDAL tools crash QGIS when a layer is removed from the canvas
Confirmed on both Debian Unstable @amd64 and Debian Testing @i386 Paolo Cavallini
02:05 AM Bug report #3100: GDAL tools crash QGIS when a layer is removed from the canvas
no seg fault under Ubuntu/trunk Giovanni Manghi

2010-10-08

01:59 AM Feature request #3101 (Closed): let the user select a standard folder for all data produced
During analyses, many new files are often produced. They can confuse user, and it can be annoying reselectin a folder... Paolo Cavallini
01:53 AM Bug report #3100 (Closed): GDAL tools crash QGIS when a layer is removed from the canvas
* Load a raster
* Open Contour from Raster menu
* Go to canvas and remove the loaded raster
* Go to the plugin
* Segf...
Paolo Cavallini
01:28 AM Bug report #3099: Projection Failure
a ntv2 grid is appropriate for just one kind of transformation, from one specific datum to another specific one. I'll... Giovanni Manghi
01:20 AM Bug report #3099: Projection Failure
Additional Projection information
Universal Transverse Mercator
AGD66 / AMG zone51
AGD84 / AMG zone51
GDA94 / MGA...
badams -
12:58 AM Bug report #3099: Projection Failure

> Additional information "Geocentric Datum of Australia
> Technical Manual"
> http://www.icsm.gov.au/gda/gdatm/gdav2...
Giovanni Manghi
12:56 AM Bug report #3099: Projection Failure
Can you attach data so I can make a test? Giovanni Manghi
12:55 AM Bug report #3099: Projection Failure
Sorry, Remaining files are too big to attach. They can be downloaded at;
http://dl.dropbox.com/u/9546967/srs.db
http...
badams -
12:41 AM Bug report #3099: Projection Failure
Did you created the necessary custom CRSs in order to make the ntv2 grid transformation?
the source SRS must include...
Giovanni Manghi
12:31 AM Bug report #3099 (Closed): Projection Failure
QGIS does not operate with Australian Datums AGD66, AGD84 and GDA94. Although it will allow the selection of these da... badams -
10:51 AM Bug report #3098 (Closed): slider and dial not working in table widgets
In Layer properties>Attributes, the widget Range does not work if Slider or dial is selected Paolo Cavallini
10:17 AM Feature request #3097 (Closed): Add preference to set/override environment variables
This is mainly for OS X, maybe Windows is similar? Could still be useful on *nix.
On OS X, _applications_ don't get...
William Kyngesburye
04:49 AM Bug report #3096 (Closed): Silent install is not possible when used to upgrade QGIS
When running the windows standalone installer with the silent switch (/S) on a system with an earlier version of QGIS... asgerpetersen -
04:42 AM Feature request #3095 (Closed): Gdal-tools: create virtual catalog with recurse scan of dirs
Actually to create a virtual catalog (vrt) is needed to select one by one all the rasters.
Would be a nice enhancemen...
aperi2007 -
02:58 AM Bug report #3094 (Closed): In Composer, save as image doesn't show existing files
In Composer, when I want to export my layout to an image, the save as dialog doesn't show existing files in the chose... Hien TRAN-QUANG

2010-10-07

01:34 AM Feature request #2991: Patch for data defined label position in new labeling
Patch updated to apply cleanly with current trunk Marco Hugentobler
01:30 AM Bug report #3093 (Closed): Labeling: Buffers in Curved Labels only partially drawn
http://trac.osgeo.org/qgis/ticket/3079 dr -
01:30 AM Bug report #3093 (Closed): Labeling: Buffers in Curved Labels only partially drawn
http://trac.osgeo.org/qgis/ticket/3079 dr -
01:21 AM Bug report #3093 (Closed): Labeling: Buffers in Curved Labels only partially drawn
If the labeling of linestring features is set to curved, only parts of the buffers are drawn. In the screenshot provi... Andreas Neumann
12:16 AM Bug report #3092 (Closed): Gdal Tools Merge tool fails to read extents
Using GDAL Tools, Warp tool I was getting a Python message that an index was out of range. The problem was in this co... sowelu -
12:24 PM Bug report #3091 (Closed): Stretch is canceled after calculating pyramids
1. Add image
2. Properties
3. Choose 2 standard deviations and min-max strech, Apply
4. Go to pyramids
5. Select all ...
Maxim Dubinin
03:57 AM Bug report #3090 (Closed): No GRASS man pages in GRASS Toolbox
When installing QGIS 1.5 or 1.6 with the OSGEO4W installer, the man pages for GRASS modules are not available, even t... Micha Silver

2010-10-06

01:48 AM Bug report #3089 (Closed): Problem with On-the-fly CRS transformation
Dear all,
I have data in a [[PostGIS]] database (1.4.2) that I access through Qgis 1.5.
All my data is in CRS 32642...
shenriod -
02:55 PM Bug report #3082 (Closed): Start Menu is cluttered
fixed in commit:4c055b9f (SVN r14351). Jürgen Fischer
02:55 PM Bug report #3082 (Closed): Start Menu is cluttered
fixed in commit:4c055b9f (SVN r14351). Jürgen Fischer
12:26 PM Bug report #3088 (Closed): QgisMapServer: trimmed xml
fixed in commit:2e43a95e (SVN r14346). Jürgen Fischer
12:26 PM Bug report #3088 (Closed): QgisMapServer: trimmed xml
fixed in commit:2e43a95e (SVN r14346). Jürgen Fischer
08:34 AM Bug report #3088 (Closed): QgisMapServer: trimmed xml
OSGeo4W / qgis build 14343
Sometimes (not always) xml-answers are trimed.
*Example 1:*
Q:...
Mavka -
12:25 PM Bug report #3087: QgisMapServer: Could not create output CRS
commit:2e43a95e (SVN r14346) also fixes the truncation issue. Jürgen Fischer
09:56 AM Bug report #3087 (Closed): QgisMapServer: Could not create output CRS
Replying to [comment:2 Mavka]:
> Related ticket in osgeo4w "#184":http://trac.osgeo.org/osgeo4w/ticket/184.
closes t...
Jürgen Fischer
09:56 AM Bug report #3087 (Closed): QgisMapServer: Could not create output CRS
Replying to [comment:2 Mavka]:
> Related ticket in osgeo4w "#184":http://trac.osgeo.org/osgeo4w/ticket/184.
closes t...
Jürgen Fischer
08:43 AM Bug report #3087: QgisMapServer: Could not create output CRS
Related ticket in osgeo4w "#184":http://trac.osgeo.org/osgeo4w/ticket/184. Mavka -
08:18 AM Bug report #3087: QgisMapServer: Could not create output CRS
Note. OSGeo4W installed in... Mavka -
08:15 AM Bug report #3087 (Closed): QgisMapServer: Could not create output CRS
OSGeo4W / qgis build 14343
Request:...
Mavka -
03:23 AM Feature request #2666: Improve the select
Replying to [comment:6 lutra]:
> oh! how I did miss that!? ;) how long have been there the NB for debian/ubuntu?
I s...
Jürgen Fischer
02:52 AM Feature request #2666: Improve the select

> No need for extra Ubuntu packages. We already provide nightly builds for Debian Lenny, Squeeze, Unstable and Ubu...
Giovanni Manghi
02:46 AM Feature request #2666: Improve the select
Replying to [comment:4 lutra]:
> I believe all but 5) are already implemented features in qgis-dev. Please install it...
Jürgen Fischer

2010-10-05

01:39 AM Feature request #2666: Improve the select
I believe all but 5) are already implemented features in qgis-dev. Please install it (under windows using osgeo4w, I ... Giovanni Manghi
01:28 AM Feature request #2666: Improve the select
I would also vote for selection improvement. At least "Invert selection" would be very useful as sometimes is easier ... Jhelebrant -
01:37 AM Feature request #3086 (Closed): Wish List - vector symbology improvement
yes, you can. Use the style manager, you can create ramps with intermediate color stops. Giovanni Manghi
01:37 AM Feature request #3086 (Closed): Wish List - vector symbology improvement
yes, you can. Use the style manager, you can create ramps with intermediate color stops. Giovanni Manghi
01:35 AM Feature request #3086 (Closed): Wish List - vector symbology improvement
Hi.
I need a possibility to change a colour ramp in point layer. If continuous ramp I can choose only between two col...
espiritocz -
08:24 PM Bug report #3085 (Closed): Wrong histogram builds over Int16 rasters
Subj. See attachment.
Example of raster: [http://gis-lab.info/data/samples/int16-tif-ndvi.7z]
dr -
01:18 PM Feature request #2786: Live GPS tracking: add support for garmin USB devices
another problem: without removing first the _garmin_gps_ kernel module the connection with gpsbabel (and the gps tool... Giovanni Manghi
01:12 PM Feature request #2786: Live GPS tracking: add support for garmin USB devices
ok, got it finally. Thanks a lot for the hint.
Just one question: I cannot see any info about the position of the s...
Giovanni Manghi
11:40 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:18 lutra]:
> Ok, I see now the kind of possibilities that gpsd offers, but I still cannot make i...
Jürgen Fischer
10:08 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices

> Ok, I see now the kind of possibilities that gpsd offers, but I still cannot make it work. I checked the gpsd docs...
Giovanni Manghi
10:07 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices

> No, you need to setup gpsd first - which works with my hcx. I suppose it does with the 60c, too. With gpsd you c...
Giovanni Manghi
05:53 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:16 lutra]:
> > GPSD doesn't support windows.

> I never mentioned windows, in fact I use Linu...
Jürgen Fischer
05:49 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:15 jef]:
> Replying to [comment:13 lutra]:
> > I would like to see if it works with my Garmin un...
Giovanni Manghi
05:44 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:13 lutra]:
> I would like to see if it works with my Garmin unit, but I'm not sure what has to b...
Jürgen Fischer
05:36 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:11 lutra]:
> I can bring my 60c too.
Unfortunatly my etrex legend hcx doesn't work with spanner...
Jürgen Fischer
12:46 PM Bug report #3080: Tiresome message when searching CRS
Yes, I agree as well! It's the only place to enter the id directly. I didn't think about that. Volker Fröhlich
10:21 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
I'm using Ubuntu 10.04 with the ubuntugis repository, that ships geos 3.2.2, any chance to test it, maybe in a VM? Giovanni Manghi
10:18 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
Replying to [comment:4 lutra]:
> weird. What geos version are you using under both systems?
Under Linux - geos-3.1.1,...
Alexander Bruy
09:11 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
weird. What geos version are you using under both systems? Giovanni Manghi
09:05 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
Can't reproduce under Windows and Linux with my own test files and with attached files Alexander Bruy
07:42 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
So it happens at least under trunk/linux (ubuntu) with this shapes (lines)
http://mapserver.uevora.pt/~mapserver/sh...
Giovanni Manghi
07:27 AM Bug report #3077: ftools (merge shapefiles tool): QGIS crashes if shapes are missing the .prj file
I've tried on 2 point shapefiles with prj/qprj removed - all normal. I'm on Windows, latest trunk.
My example: http:...
Maxim Dubinin
07:01 AM Feature request #3084: Rule-based renderer should allow reordering after rules have been created
It would be nice if one would have "up/down" arrows, just like in the symbol properties dialogue of the new symbology... Andreas Neumann
06:56 AM Feature request #3084 (Closed): Rule-based renderer should allow reordering after rules have been...
If rules are created in the rule-based renderer one cannot change the order after the rule creation. Often one discov... Andreas Neumann
06:54 AM Bug report #3083 (Closed): actions broken in trunk
fixed in . Jürgen Fischer
06:54 AM Bug report #3083 (Closed): actions broken in trunk
fixed in . Jürgen Fischer
04:11 AM Bug report #3083 (Closed): actions broken in trunk
Seems that with trunk (ate least under debian and ubuntu linux) actions are broken.
For example in a shape with a fi...
Giovanni Manghi
05:21 AM Bug report #3076: OSM plugin: python error clicking on "load OSM from file"
works fine under trunk/osgeo4w Giovanni Manghi
05:02 AM Bug report #3076: OSM plugin: python error clicking on "load OSM from file"
the same message shows when clicking on "download" in the "download osm data" dialog. Giovanni Manghi
02:05 AM Feature request #679 (Closed): delay recording of changes to PostGIS (for laptops and other offli...
fixed in #14335 Giovanni Manghi
02:05 AM Feature request #679 (Closed): delay recording of changes to PostGIS (for laptops and other offli...
fixed in #14335 Giovanni Manghi

2010-10-04

01:30 AM Bug report #3080: Tiresome message when searching CRS

> For a future discussion: -1 for the Name as default.
agree
Giovanni Manghi
01:20 AM Bug report #3080: Tiresome message when searching CRS
Seems JEF implemented the first part only, what makes me happy.
For a future discussion: -1 for the Name as default...
Borys Jurgiel
04:34 PM Bug report #3080 (Closed): Tiresome message when searching CRS
fixed in commit:bc1966b2 (SVN r14333). Jürgen Fischer
04:34 PM Bug report #3080 (Closed): Tiresome message when searching CRS
fixed in commit:bc1966b2 (SVN r14333). Jürgen Fischer
04:17 PM Bug report #3080 (Closed): Tiresome message when searching CRS
How to reproduce:
- Open Project Properties
- Start typing in the find field
- Stop typing and try to change any ...
Volker Fröhlich
01:11 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:12 jef]:
> commit:7b1fc1bf (SVN r14332) adds gpsd support. My garmin etrex HCx now works via GP...
Giovanni Manghi
02:55 PM Feature request #2786: Live GPS tracking: add support for garmin USB devices
commit:7b1fc1bf (SVN r14332) adds gpsd support. My garmin etrex HCx now works via GPSD (using the garmin_gps kernel ... Jürgen Fischer
03:50 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
I can bring my 60c too. Giovanni Manghi
03:41 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Hi!
I can provide a Garmin 60CSx for the Hackfest. I have easy access to one - I guess if the 60CSx is working all ot...
Werner Macho
03:31 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices

> Serial devices (including usbserial devices and serial bluetooth) speaking NMEA are supported. Garmin use an othe...
Giovanni Manghi
03:28 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
Replying to [comment:7 lutra]:
> It seems that usb devices are not supported by design(?) Nevertheless the usb device...
Jürgen Fischer
03:23 AM Feature request #2786: Live GPS tracking: add support for garmin USB devices
It seems that usb devices are not supported by design(?) Nevertheless the usb devices work fine (out of the box) with... Giovanni Manghi
08:43 PM Bug report #3082 (Closed): Start Menu is cluttered
Please remove the uninstaller and web site shortcuts from the Start Menu.
Best practices for Windows applications me...
Aren Cambre
08:40 PM Feature request #2832: rule-based renderer in symbology-ng should show rules in legend
Any chance the devs can get this landed soon? Thanks Mathieu Pellerin - nIRV
04:42 PM Bug report #3081: On-the-Fly-projection crashes QGIS, but not in Windows
The real link from the archived mail: http://www.archivum.info/[email protected]/2009-09/00531/%28Qt-interest... Jürgen Fischer
04:40 PM Bug report #3081 (Closed): On-the-Fly-projection crashes QGIS, but not in Windows
This is probably a Qt problem. The Qt in OSGeo4W is patched with the attached patch. See also http://lists.osgeo.or... Jürgen Fischer
04:40 PM Bug report #3081 (Closed): On-the-Fly-projection crashes QGIS, but not in Windows
This is probably a Qt problem. The Qt in OSGeo4W is patched with the attached patch. See also http://lists.osgeo.or... Jürgen Fischer
04:31 PM Bug report #3081 (Closed): On-the-Fly-projection crashes QGIS, but not in Windows
How to reproduce:
- Download this 0.7 MB shapefile: http://geocommons.com/overlays/5603.zip
- Open the shapefile a...
Volker Fröhlich
02:47 AM Bug report #3075: OSM Plugin: OSM Import Data from Layer problem.
Related forum thread: [http://forum.qgis.org/viewtopic.php?f=2&t=7238] Anita Graser

2010-10-03

12:49 AM Bug report #3079: Labeling buffer issue
This will be fixed by applying the last version of patch #2991 Marco Hugentobler
12:45 AM Bug report #3079: Labeling buffer issue
At mine, all buffer sizes are affected (also < 1) Borys Jurgiel
12:18 AM Bug report #3079 (Closed): Labeling buffer issue
1. Open line vector layer;
2. Run Labeling tool and set follow settings:
a) label this layer and set labeling field...
dr -
12:00 AM Bug report #3078: Scotese's shapefiles causes Tethys to crash
please attach sample data Giovanni Manghi
06:06 PM Bug report #3078 (Closed): Scotese's shapefiles causes Tethys to crash
Qgis 1.5.0 crashes everytime I try to load a shapefile from the Earth System History GIS collection from C. R. Scotes... asierra -
11:15 PM Feature request #3039 (Closed): symbol levels ignored for rule based rendering
This is addressed in patch #2832 Marco Hugentobler
11:15 PM Feature request #3039 (Closed): symbol levels ignored for rule based rendering
This is addressed in patch #2832 Marco Hugentobler
04:35 PM Feature request #3067: Support DBF table as datasource
In OO you can easily change the separator symbol and don't use the '"' to wrap values.
When saving to CSV just check...
Giovanni Manghi
04:22 PM Bug report #3058: print composer: exporting to PDF does not resize correctly vectors if symbology...
I'm using the new symbology. If I set a point as a circle symbol with 15mm of diameter, on screen (in the canvas and ... Giovanni Manghi
04:00 PM Bug report #3076: OSM plugin: python error clicking on "load OSM from file"
It's caused by the line 19: from [[PyQt]]4 import *
>>> from [[PyQt]]4.QtCore import *
>>> Qt
<class 'PyQt4.QtCore.Q...
Borys Jurgiel
03:49 PM Bug report #3076 (Closed): OSM plugin: python error clicking on "load OSM from file"
This happens on trunk under Ubuntu 10.04. Under trunk/osgeo4w does not seems to happen:... Giovanni Manghi
03:58 PM Bug report #3077 (Closed): ftools (merge shapefiles tool): QGIS crashes if shapes are missing the...
This is true also for the standalone plugin (by the way, what is the difference between the two?).
Console message i...
Giovanni Manghi
06:57 AM Feature request #2985 (Closed): qgis broken with new py-sip
... Jürgen Fischer
06:57 AM Feature request #2985 (Closed): qgis broken with new py-sip
... Jürgen Fischer
 

Also available in: Atom