Activity

From 2011-10-21 to 2011-11-19

2011-11-19

07:01 PM Bug report #4288: Mac OSX Lion GDAL Plugin
Thanks to Chris Kahler (probably the original submitter of this bug, "CK") who contacted me via email, after installi... Alexandre Leroux
06:54 PM Bug report #4471: OpenLayers classFactory Error on QGIS 1.7.1 Launch on MacOS X Lion
Giovanni Manghi wrote:
> The openlayers plugin is not a core QGIS feature, is a 3rd party tool. Report the issue to t...
Alexandre Leroux
05:48 PM Bug report #4537: Unfilled Selected polygons not shown: boundaries not highlighted
Agus,
a couple of dumb questions.
1. Does this problem only occur in some of the polygons on your layer, or all of t...
ramon .
02:54 PM Feature request #4553: Selection color/border size for polygons (with solid fill, no fill, semi-t...
FWIW I think it's differrent to #1509 too.
I had presumed that the "bug" here was the "feature" solution to #1509
B...
ramon .
02:39 PM Bug report #4555 (Closed): Rendering of symbols when exporting to pdf
There is a mismatch in symbol size between the in-program rendered symbol size and the exported .pdf size. In progra... Martin Zand

2011-11-18

11:03 AM Bug report #4550: Improvements to projection widget
I've more or less implemented above: by using the a (over all columns).
I need some input for the dialogs. I've hidd...
Richard Duivenvoorde
11:03 AM Bug report #4550: Improvements to projection widget
I've more or less implemented above: by using the a (over all columns).
I need some input for the dialogs. I've hidd...
Richard Duivenvoorde
09:59 AM Bug report #3550: Labels scale dependency not saved
Roger Diercks wrote:
> I am experiencing the issue with layer label scale dependencies not being saved to the project...
Giovanni Manghi
09:59 AM Bug report #3550: Labels scale dependency not saved
Roger Diercks wrote:
> I am experiencing the issue with layer label scale dependencies not being saved to the project...
Giovanni Manghi
09:22 AM Bug report #3550: Labels scale dependency not saved
I am experiencing the issue with layer label scale dependencies not being saved to the project file in both 1.7.1. an... Roger Diercks
09:08 AM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...
Alister Hood wrote:
> Is there any reason Bill's patch can't be applied?
> It works fine.
I agree, and the bug is re...
Giovanni Manghi
09:04 AM Feature request #4528 (Feedback): Join does not consolidate the new table
I believe that after Marco explanation it should be possible to change subject and description of this ticket, eventu... Giovanni Manghi
09:04 AM Feature request #4528 (Feedback): Join does not consolidate the new table
I believe that after Marco explanation it should be possible to change subject and description of this ticket, eventu... Giovanni Manghi
09:03 AM Feature request #4553: Selection color/border size for polygons (with solid fill, no fill, semi-t...
Alexander Bruy wrote:
> Duplicate #1509.
> Use new symbology, where this bug already was fixed. Old symbology is depr...
elcuco -
09:03 AM Feature request #4553: Selection color/border size for polygons (with solid fill, no fill, semi-t...
Alexander Bruy wrote:
> Duplicate #1509.
> Use new symbology, where this bug already was fixed. Old symbology is depr...
elcuco -
08:34 AM Feature request #4553 (Closed): Selection color/border size for polygons (with solid fill, no fil...
Duplicate #1509.
Use new symbology, where this bug already was fixed. Old symbology is deprecated.
Alexander Bruy
08:34 AM Feature request #4553 (Closed): Selection color/border size for polygons (with solid fill, no fil...
Duplicate #1509.
Use new symbology, where this bug already was fixed. Old symbology is deprecated.
Alexander Bruy
06:29 AM Feature request #4553: Selection color/border size for polygons (with solid fill, no fill, semi-t...
Giovanni Manghi wrote:
> there is already a ticket for this kind of issue. I have no time to check myself now, please...
elcuco -
04:53 AM Feature request #4553: Selection color/border size for polygons (with solid fill, no fill, semi-t...
there is already a ticket for this kind of issue. I have no time to check myself now, please have a look and eventual... Giovanni Manghi
03:27 AM Feature request #4553 (Open): Selection color/border size for polygons (with solid fill, no fill,...
Hi!
When selecting polygons with no fill, is it possible to just put the yellow color on the border, and not in the f...
elcuco -
08:59 AM Bug report #4035: Print Composer shape combo box not refecting current shape
Some can review and eventually commit this patch? thanks. Giovanni Manghi
08:57 AM Bug report #3109: switching layers does not work
With caching OFF: load a layer, then a second one; switch off and on the top layer, ok; switch off and on the bottom ... Paolo Cavallini
08:50 AM Bug report #3109: switching layers does not work
Paolo Cavallini wrote:
> It seems to have reappeared. If I switch cache off it is ok, when on the problem is still th...
Giovanni Manghi
08:57 AM Feature request #4247: Legend - setting for group spacing
cab anyone review and eventually commit this patch? thanks. Giovanni Manghi
08:55 AM Bug report #4505 (Feedback): Open ESRI Personal Geodatabase (mdb)
There are a number of tickets open in this tracker to report problems with cyrillic/japanese/etc. characters in the p... Giovanni Manghi
08:53 AM Bug report #4504: QGIS fails to print ecw image in composer
Nathan Woodrow wrote:
> This seems to be related to memory.
I have also evidence that such problems (not only with e...
Giovanni Manghi
08:49 AM Bug report #4502 (Closed): Crash - QspatiaLite Upload Table - Use VirtualShape Import ON
qspatialite is a 3rd party plugin. Ask the author to open a project for the plugin in this very same redmine tracker,... Giovanni Manghi
08:49 AM Bug report #4502 (Closed): Crash - QspatiaLite Upload Table - Use VirtualShape Import ON
qspatialite is a 3rd party plugin. Ask the author to open a project for the plugin in this very same redmine tracker,... Giovanni Manghi
08:48 AM Bug report #4499 (Closed): Multiple selection of vertices during editing does not work
It's ok now. Possibly a local problem. Paolo Cavallini
08:48 AM Bug report #4499 (Closed): Multiple selection of vertices during editing does not work
It's ok now. Possibly a local problem. Paolo Cavallini
08:47 AM Bug report #4499 (Feedback): Multiple selection of vertices during editing does not work
cannot confirm, please leave feedback Giovanni Manghi
08:43 AM Bug report #4487 (Feedback): Crash when splitting polygons in shp file
sorry, the described procedure is not clear.
all steps other the first seems to be related to adding new features wi...
Giovanni Manghi
08:43 AM Bug report #4487 (Feedback): Crash when splitting polygons in shp file
sorry, the described procedure is not clear.
all steps other the first seems to be related to adding new features wi...
Giovanni Manghi
08:24 AM Feature request #3387: let the user select the color map extreme colors
Giovanni Allegri wrote:
> AFAICS, this feature has not been implemented yet.
> Are there other ways to select first/l...
Giovanni Manghi
06:59 AM Bug report #4552 (Closed): patch for v.what.vect
Fixed in commit 8f33367ffde55e3f8e81e7d7a7c2aaa5d727b26c Giuseppe Sucameli
06:59 AM Bug report #4552 (Closed): patch for v.what.vect
Fixed in commit 8f33367ffde55e3f8e81e7d7a7c2aaa5d727b26c Giuseppe Sucameli
05:37 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
Giuseppe Sucameli wrote:
> Anyone confirm that it works fine when clipping the raster with a rectangular region?
> I...
Giovanni Manghi
05:30 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
Anyone confirm that it works fine when clipping the raster with a rectangular region?
If yes, in my opinion is a GDA...
Giuseppe Sucameli
01:47 AM Feature request #4530 (Feedback): GdalTools Clipper: make "-crop_to_cutline" a separate option
Oh gosh, what a mess.
I was sure that I made pretty precise tests, then found a pattern (the gdal version) so I file...
Giovanni Manghi
01:47 AM Feature request #4530 (Feedback): GdalTools Clipper: make "-crop_to_cutline" a separate option
Oh gosh, what a mess.
I was sure that I made pretty precise tests, then found a pattern (the gdal version) so I file...
Giovanni Manghi
01:47 AM Feature request #4530 (Feedback): GdalTools Clipper: make "-crop_to_cutline" a separate option
Oh gosh, what a mess.
I was sure that I made pretty precise tests, then found a pattern (the gdal version) so I file...
Giovanni Manghi

2011-11-17

12:26 AM Bug report #1978 (Feedback): QGIS take ages to open big (or just complex) vectors
Giovanni Manghi
05:15 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Martin Dobias wrote:
> Giovanni Manghi wrote:
> > Here is an interesting vector
> >
> > http://www.faunalia.pt/downl...
Giovanni Manghi
12:17 AM Bug report #4552 (Closed): patch for v.what.vect
in src/plugins/grass/modules/v.what.vect.qgm
line
<field key="qcolumn" layer="qvector" type="string"/>
must be rep...
Giovanni Manghi
05:56 PM Feature request #4551 (Closed): Expression parser: automatic conversion to string should be consi...
In the following expression the $AREA is automatically converted into a string:
@'AREA = '||$AREA||' m²'@
Users will ...
Alister Hood
10:14 AM Bug report #4550 (Closed): Improvements to projection widget
I think the projection widget should be improved, by
** having the search filtering the projections rather than movin...
Paolo Cavallini
10:07 AM Bug report #4549 (Closed): Spatialite and Shapefile new layer dialog: CRS selection non standard ...
The dialog for creating a new SpatiaLite layer is quite different from the standard QGIS stuff: selecting a CRS does ... Paolo Cavallini
09:45 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
alobo - wrote:
> I meant the GDALtools developer team...
I filed a ticket in the GDAL trac
http://trac.osgeo.org/gd...
Giovanni Manghi
02:09 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
Giuseppe (the gdal tools developer), what do you think about? Do you confirm is a gdal issue? Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
01:38 AM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
> 1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the console.
Hi Ag...
Giovanni Manghi
09:35 AM Bug report #4469: Postgis connection lost forever on backend restart.
Then I cannot confirm the problem here Giovanni Manghi
09:32 AM Bug report #4469: Postgis connection lost forever on backend restart.
A simple test with b6852f1 still shows the problem of things disappearing on backend restart.
Test:
- Open qgis
- S...
Sandro Santilli
04:19 AM Bug report #4469: Postgis connection lost forever on backend restart.
Sandro Santilli wrote:
> Same with a single layer (edge_data) and no styling.
it seems to me that is either not conf...
Giovanni Manghi
08:53 AM Bug report #4302: Can't use 'Geostationary Satellite View' projection
Sorry that I was away from this discussion... I assumed that no one had replied since I didn't receive any e-mails...... Ricardo Silva
08:37 AM Bug report #4548 (Closed): "Add delimited text layer" Plugin does not work with QGIS v 1.9.90-Alpha
I'm using the very same qgis version in the very same operating system/version. The plugin does not have a menu entry... Giovanni Manghi
08:37 AM Bug report #4548 (Closed): "Add delimited text layer" Plugin does not work with QGIS v 1.9.90-Alpha
I'm using the very same qgis version in the very same operating system/version. The plugin does not have a menu entry... Giovanni Manghi
08:34 AM Bug report #4548 (Closed): "Add delimited text layer" Plugin does not work with QGIS v 1.9.90-Alpha
Despite being active in the "Manage Plugins" window, the "Add delimited text layer" Plugin does not appear in the plu... Jeff Watkins
07:43 AM Bug report #4465 (Closed): patch to update the GRASS plugin to make it cope correctly with the ne...
Fixed in commit a9f82d1e77cf5dc2c8ae380a14c70a847d5b278a Giuseppe Sucameli
07:43 AM Bug report #4465 (Closed): patch to update the GRASS plugin to make it cope correctly with the ne...
Fixed in commit a9f82d1e77cf5dc2c8ae380a14c70a847d5b278a Giuseppe Sucameli
07:43 AM Bug report #4465 (Closed): patch to update the GRASS plugin to make it cope correctly with the ne...
Fixed in commit a9f82d1e77cf5dc2c8ae380a14c70a847d5b278a Giuseppe Sucameli
05:30 AM Bug report #4547 (Closed): Garbled Japanese characters in GRASS plugin
In Japan if we try to use GRASS plugin with Japanese, we can not find correct japanese leter because of the Garbring ... Masaru Narazaki Narazaki
05:21 AM Bug report #4466 (Closed): Fixes for "v.what.vect" and "v.generalize" modules in the GRASS plugin
Fixed in r0a17ad5. Giuseppe Sucameli
05:21 AM Bug report #4466 (Closed): Fixes for "v.what.vect" and "v.generalize" modules in the GRASS plugin
Fixed in r0a17ad5. Giuseppe Sucameli
05:21 AM Bug report #4466 (Closed): Fixes for "v.what.vect" and "v.generalize" modules in the GRASS plugin
Fixed in r0a17ad5. Giuseppe Sucameli
05:05 AM Bug report #4540: Garbled field names in newly created Shapefiles
pfoo, this is what Google Translate makes of it... not very clear yet. But I think we need someone able to check this... Richard Duivenvoorde

2011-11-16

09:23 PM Feature request #4080: Html formatted labels
I'd also like to see a WYSIWYG(what you see is what you get) editor like the Redmine editor I'm typing in now. Then ... cgsbob -
02:26 PM Bug report #4538 (Closed): Line decoration (direction arrow) broke (again?)
Giovanni Manghi
02:24 PM Bug report #4538: Line decoration (direction arrow) broke (again?)
It didn't broke, zooming in revealed last segment to be really going up. Sorry for the noise. Great to see QGis getti... Sandro Santilli
05:06 AM Bug report #4538: Line decoration (direction arrow) broke (again?)
The tarball contains all data required to reproduce the problem Sandro Santilli
04:57 AM Bug report #4538 (Closed): Line decoration (direction arrow) broke (again?)
Not sure if this is an old or new bug.
QGis 1.9.90-Alpha (built from the HF) shows an arrow at the left of a line, bu...
Sandro Santilli
08:15 AM Bug report #4544: graduated classification
if it is a bug (and should be) you have to wait for a fix. If it is critical for you then it is suggested to support ... Giovanni Manghi
08:04 AM Bug report #4544 (Closed): graduated classification
I joined a shape file with a dbf file and wanted to do a classification of one of the columns. When I used a "catego... Rosario Alfaro
07:48 AM Bug report #4543 (Closed): New diagrams: option "Show all" missing
Currently new diagrams use the PAL overlap avoidance, so too close pies are not shown. Better add an option to show t... Paolo Cavallini
07:43 AM Feature request #4542 (Open): ColorBrewer color ramps: better GUI organization
ColorBrewer ramps belong to 3 different types: sequential, diverging and qualitative. In the current GUI they are all... Paolo Cavallini
07:37 AM Bug report #4541 (Closed): Change interface of SVG symbols list: tree
The current layout of SVG symbol list (preview of all symbols in a single box) is ok for up to 20-30 symbols. Now tha... Paolo Cavallini
07:36 AM Bug report #4539 (Feedback): ジオレファレンサープラグインの日本語対応
Please file the tickets in English :) Giovanni Manghi
06:46 AM Bug report #4539 (Closed): ジオレファレンサープラグインの日本語対応
ジオレファレンサープラグインで、位置を設定後、保存するファイル名のパスに日本語があると、エラーが発生します。
すべて英語だと正常に変換、保存されます。
kouichi kita
07:36 AM Bug report #4540 (Feedback): Garbled field names in newly created Shapefiles
Please file the tickets in English :) Giovanni Manghi
07:01 AM Bug report #4540 (Closed): Garbled field names in newly created Shapefiles
In QGIS 1.7.1, when I have created a new shapefile with Japanese characters on the field names, the field names are g... kouichi kita
07:32 AM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
OK, so the dynamic lookup only partially works. Loading GRASS data works, but running GRASS commands crashes QGIS wi... William Kyngesburye
07:32 AM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
OK, so the dynamic lookup only partially works. Loading GRASS data works, but running GRASS commands crashes QGIS wi... William Kyngesburye
06:41 AM Bug report #4469: Postgis connection lost forever on backend restart.
With Qgis 1.8.0 8422a9d (16/11/2011 with osgeow), 2*postgres 9/ postgis 1.5 /1 pgpool2, when we stop one database, pg... Regis Haubourg
01:29 AM Bug report #4451: (regression) Inconsistent behavior in the table of attributes after digitizing ...
Update;
it is a *regression*, in QGIS 1.6 there isn't this issue.
I noticed also that after adding a feature and se...
Giovanni Manghi
01:29 AM Bug report #4451: (regression) Inconsistent behavior in the table of attributes after digitizing ...
Update;
it is a *regression*, in QGIS 1.6 there isn't this issue.
I noticed also that after adding a feature and se...
Giovanni Manghi

2011-11-15

10:48 PM Bug report #4537 (Closed): Unfilled Selected polygons not shown: boundaries not highlighted
If the style of the vector layer consists of unfilled polygons,
selected polygons do not show up: boundaries of selec...
alobo -
04:00 PM Bug report #4500 (Closed): Simplify tool freezes QGIS
Giovanni Manghi
04:00 PM Bug report #4535 (Closed): qgis freezes when simplyfing (tool "simplify feature") any kind of pol...
Richard Duivenvoorde wrote:
> I would think this is a duplicate of #4500 for which we applied a patch on 13th novembe...
Giovanni Manghi
04:00 PM Bug report #4535 (Closed): qgis freezes when simplyfing (tool "simplify feature") any kind of pol...
Richard Duivenvoorde wrote:
> I would think this is a duplicate of #4500 for which we applied a patch on 13th novembe...
Giovanni Manghi
07:23 AM Bug report #4535: qgis freezes when simplyfing (tool "simplify feature") any kind of polygon made...
I would think this is a duplicate of #4500 for which we applied a patch on 13th november
Did you test it with this v...
Richard Duivenvoorde
03:38 AM Bug report #4535: qgis freezes when simplyfing (tool "simplify feature") any kind of polygon made...
it freezes also with very simple features, like a square (then just 4 nodes). Giovanni Manghi
03:24 AM Bug report #4535 (Closed): qgis freezes when simplyfing (tool "simplify feature") any kind of pol...
subject says it all Giovanni Manghi
01:32 PM Bug report #4511 (Closed): Refresh button doesn't work in QGis Browser for PostgreSQL
Fixed in commit:09fc7f4 Martin Dobias
01:32 PM Bug report #4511 (Closed): Refresh button doesn't work in QGis Browser for PostgreSQL
Fixed in commit:09fc7f4 Martin Dobias
03:01 AM Bug report #4534 (Closed): "Split vector layer" freezes QGIS
It was tested on master and 1.7.1 on both Debian and Ubuntu. On OsX gives an error message but eventually finishes th... Giovanni Manghi

2011-11-14

12:26 AM Bug report #4523: QGIS hangs when selecting a feature with the "Node Tool"
Martin Dobias wrote:
> Actually we could remove the validation procedures from QGIS and use GEOSIsValidDetail from GE...
Giovanni Manghi
09:54 AM Bug report #4523: QGIS hangs when selecting a feature with the "Node Tool"
Actually we could remove the validation procedures from QGIS and use GEOSIsValidDetail from GEOS (available from vers... Martin Dobias
01:51 AM Bug report #4523: QGIS hangs when selecting a feature with the "Node Tool"
Most of the time is spent for validating the geometries. We discussed the possibility of having an option for turning... Marco Hugentobler
05:09 PM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
I have a new view of the problem - it's not hung up on anything really, but the Enter Map Coordinates dialog is hidde... William Kyngesburye
02:50 PM Bug report #4167: multi-band gray-scale raster style forgets band selection on edit
The Classify option under the Colormap tab does not reflect the selected band either (QGIS1.7.1), no closing & openin... Thaddeus -
02:01 PM Bug report #4167: multi-band gray-scale raster style forgets band selection on edit
Only the problem on the "style" tab is a duplicate.
Bill provided a patch on #4138 to fix "the selected band number o...
Alister Hood
02:37 PM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
I get different (QGIS1.7.1) initial Handles (0 or 20000) when exporting, depending if the source file is VRT or SHP: ... Thaddeus -
01:55 PM Bug report #4138: After selecting a specific band in raster properties, the dropdown in the style...
Is there any reason Bill's patch can't be applied?
It works fine.
Alister Hood
10:41 AM Bug report #4533 (Closed): Checkbox "only look in geometry_columns table" is misworded
The checkbox in postgresql provider connection "Edit" GUI is inaccurate for a few reasons:
1. We look in both geometr...
Sandro Santilli
10:40 AM Feature request #4532 (Closed): Lookup spatial type of TopoGeometry columns from metadata table
As done for GEOMETRY and GEOGRAPHY type, we should also look at metadata tables for TOPOGEOMETRY types.
Doing so woul...
Sandro Santilli
09:47 AM Bug report #4519 (Closed): Changing color of a layer causes crash
This is a duplicate of #4439 Martin Dobias
09:47 AM Bug report #4519 (Closed): Changing color of a layer causes crash
This is a duplicate of #4439 Martin Dobias
02:45 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
I meant the GDALtools developer team... alobo -
02:45 AM Feature request #4530: GdalTools Clipper: make "-crop_to_cutline" a separate option
Hi Giovanni,
1. I confirm this is a problem in GDAL as the same result is produced by the command pasted on the cons...
alobo -
02:03 AM Feature request #4528: Join does not consolidate the new table
The join function does not write joined tables to the original tables intentionally.
However, it should probably not...
Marco Hugentobler

2011-11-13

03:06 PM Feature request #4530 (Feedback): GdalTools Clipper: make "-crop_to_cutline" a separate option
Hi Agus,
if there is a problem it should be in gdal, not the tools. Please give it a try from the command line.
In ...
Giovanni Manghi
02:46 PM Feature request #4530 (Closed): GdalTools Clipper: make "-crop_to_cutline" a separate option
I get a shifted result if clipping a raster layer with a vector layer.
Raster to be clipped:
South East Asia_2007_del...
alobo -
10:19 AM Feature request #4529 (Open): Improve "select" of TopoGeometry objects for postgresql provider
See http://trac.osgeo.org/postgis/ticket/1290 for a supposedly transparent way to handle this.
But it probably makes ...
Sandro Santilli
10:15 AM Feature request #4528 (Closed): Join does not consolidate the new table
After joining a dbf table to the attribute table of a vector layer and
leaving "Cache join layer in virtual memory" *...
alobo -
09:36 AM Bug report #4396: (fTools) - Check geometry Validity raises exception clicking on errors with no ...
The absence of coordinates in the error message was due to the PostGIS geometries being NULL.
I attach a simple scri...
Luca Sigfrido Percich
08:12 AM Bug report #4396: (fTools) - Check geometry Validity raises exception clicking on errors with no ...
Please provide sample dataset Alexander Bruy
09:28 AM Bug report #4500: Simplify tool freezes QGIS
a patch is accepted, please test current master
commit:cf849875a2b9edadb91166c82e733173b6a7a27d
Richard Duivenvoorde
08:17 AM Bug report #4500: Simplify tool freezes QGIS
tested this, but I'm not sure it is related to the Rectangle plugin.
I can reproduce it though, with the attached da...
Richard Duivenvoorde
08:47 AM Feature request #4527 (Closed): Datatype column in the postgresql source select dialog
Since postgresql provider now supports geometry, geography and topogeometry, it'd be helpful to have the indication a... Sandro Santilli
08:21 AM Bug report #4386 (Closed): ftools: raster layers are shown as possible input layers
Raster layers are shown only in several tools (Random points, Regular points, Vector grid and Polygon from layer exte... Alexander Bruy
08:21 AM Bug report #4386 (Closed): ftools: raster layers are shown as possible input layers
Raster layers are shown only in several tools (Random points, Regular points, Vector grid and Polygon from layer exte... Alexander Bruy
07:36 AM Bug report #4526 (Closed): Empty Attribute Table if layer in different CRS than project
Having On the Fly Reprojection activated, the Attribute Table of a
layer that is on a different CRS than the project ...
alobo -
06:24 AM Bug report #3581: Ftools: union tool leave holes in output
There is no need to pay bounty. Please direct this money to support QGIS Alexander Bruy
04:57 AM Bug report #3581 (Bounty paid): Ftools: union tool leave holes in output
Paolo Cavallini
03:57 AM Bug report #3581: Ftools: union tool leave holes in output
Paolo Cavallini
03:57 AM Bug report #3581 (Fixed for bounty): Ftools: union tool leave holes in output
Paolo Cavallini
03:57 AM Bug report #3581: Ftools: union tool leave holes in output
Fixed, thanks Alex. The behaviour has changed: the warning of different/missing CRS is issued at the end of the analy... Paolo Cavallini
06:22 AM Bug report #4525 (Closed): Composer map rotation / items
Composer map printing wrong if rotation is set and canvas items are used Marco Hugentobler
06:15 AM Bug report #4519: Changing color of a layer causes crash
also tried a clean build 1.7.2 now. Also no crashes.
Some extra info about our build environment:
bison2.5
qmake 4...
Richard Duivenvoorde
04:18 AM Bug report #4519: Changing color of a layer causes crash
we did a hand build install on the machine of the issuer using master (ce8c75f) during the hackfest in Zurich.
In th...
Richard Duivenvoorde
03:20 AM Bug report #4376 (Closed): QGIS doesn't ask for the CRS when loading GPX files, but it does when ...
Giovanni Manghi
03:20 AM Feature request #4524 (Closed): Document that GPX files are always supposed to be in WGS84
This is a follow up of #4376
Long story short:
* users can add GPX like any other vector
* if "Options -> CRS -> c...
Giovanni Manghi
02:59 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors

> That's a nasty layer :-) Really, the shape data file itself has a size of 500MB, the polygons consist of lots of v...
Giovanni Manghi
02:40 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors

> This looks like a completely different problem, a separate ticket would be appropriate.
done #4523
Giovanni Manghi
02:40 AM Bug report #4523 (Closed): QGIS hangs when selecting a feature with the "Node Tool"
Sample data here:
http://www.faunalia.pt/downloads/test_slow_vector.zip
Toggling editing and try use the node tool ...
Giovanni Manghi
02:30 AM Feature request #4153 (Closed): Add fillnodata util
Added in commit:f8bbe8fb70 Alexander Bruy
02:30 AM Feature request #4153 (Closed): Add fillnodata util
Added in commit:f8bbe8fb70 Alexander Bruy
02:25 AM Feature request #4522: Customize Value Tool graphics
Hi, Yes please add this request to the valuetool issues.
And could you please add some information about an usecase ...
Richard Duivenvoorde
02:00 AM Feature request #4522 (Closed): Customize Value Tool graphics
Hi Agus,
the plugin is a 3rd party one and now has his "own" trac here on Redmine (we are opening plugins subprojects...
Giovanni Manghi
02:00 AM Feature request #4522 (Closed): Customize Value Tool graphics
Hi Agus,
the plugin is a 3rd party one and now has his "own" trac here on Redmine (we are opening plugins subprojects...
Giovanni Manghi
01:46 AM Feature request #4522 (Closed): Customize Value Tool graphics
The user should be able to customize axes, in particular set
the min and max values for the Y-axis.
For the X-axis, ...
alobo -
02:12 AM Bug report #4521: Map Tips does not work with on the fly CRS transformation
In my qgis-master installation maptips are broken regardless the CRS of the layer, the CRS of the project or if OTFR ... Giovanni Manghi

2011-11-12

12:24 AM Bug report #4521 (Closed): Map Tips does not work with on the fly CRS transformation
Map tips do not show up if a given layer has a different CRS than the project with
on the fly CRS transformation act...
alobo -
12:24 PM Bug report #3581: Ftools: union tool leave holes in output
Should be fixed in commit:7cd2850da5
Please check and report if any problems remains.
Alexander Bruy
09:23 AM Bug report #4519: Changing color of a layer causes crash
I tested on linux here (be9bdeb), but cannot reproduce the crash.
Assigning to William, hopefully he can reproduce (...
Richard Duivenvoorde
09:03 AM Bug report #4519 (Feedback): Changing color of a layer causes crash
I really think that this should be a duplicate of an older ticket, can you please check and report back? thanks Giovanni Manghi
09:01 AM Bug report #4519 (Closed): Changing color of a layer causes crash
When applying another color to a QGIS layer, QGIS crashes every other time, i. e. about 1 in 3 times applying the col... Robert Huber
09:22 AM Bug report #4520 (Closed): QGIS mapserver: Spaces in GetFeatureInfo filter string values are reje...
WMS request:... Mathias Walker
08:05 AM Bug report #4368 (Closed): Union tool creates shapefile with missing polygons
Paolo Cavallini
06:18 AM Feature request #3284: Wrapping long labels
I wouldn't close it just yet as the expression labeling thing doesn't really expose a function to wrap strings. It's... Nathan Woodrow
06:18 AM Feature request #3284: Wrapping long labels
I wouldn't close it just yet as the expression labeling thing doesn't really expose a function to wrap strings. It's... Nathan Woodrow
06:13 AM Feature request #3284: Wrapping long labels
I think this request if no longer needed since the implementation of expression based labelling : http://woostuff.wor... Michael Douchin
05:59 AM Bug report #4518 (Closed): Rotation of labels and symbols should be in the same direction
Currently, rotation of labels is counterclockwise, whereas rotation of symbols is clockwise. This gives unexpected re... Paolo Cavallini
05:56 AM Feature request #4517 (Closed): Add rotation option to PAL labelling
Currently, rotation of labels based on a table field is only possible if fixed position is activated (x,y fields are ... Paolo Cavallini
05:08 AM Bug report #3696 (Closed): classification keeps remembering a removed feature class
is working in new symbology, so future is saved :-) Richard Duivenvoorde
05:08 AM Bug report #3696 (Closed): classification keeps remembering a removed feature class
is working in new symbology, so future is saved :-) Richard Duivenvoorde
05:08 AM Bug report #3696 (Closed): classification keeps remembering a removed feature class
is working in new symbology, so future is saved :-) Richard Duivenvoorde
05:08 AM Bug report #3696 (Closed): classification keeps remembering a removed feature class
is working in new symbology, so future is saved :-) Richard Duivenvoorde
05:02 AM Bug report #4039 (Closed): wms layerorder dialog missing icons and wrong tooltips
Close it: A patch like this is applied, button icons not preferred, because this needs QgisApp code which is not avai... Richard Duivenvoorde
05:02 AM Bug report #4039 (Closed): wms layerorder dialog missing icons and wrong tooltips
Close it: A patch like this is applied, button icons not preferred, because this needs QgisApp code which is not avai... Richard Duivenvoorde
05:02 AM Bug report #4039 (Closed): wms layerorder dialog missing icons and wrong tooltips
Close it: A patch like this is applied, button icons not preferred, because this needs QgisApp code which is not avai... Richard Duivenvoorde
04:53 AM Bug report #4253 (Bounty paid): Fix "value tool" issue with GRASS rasters (and make the plugin) core
Ok Richard has said no need to pay him Tim Sutton
04:53 AM Bug report #4253: Fix "value tool" issue with GRASS rasters (and make the plugin) core
Ok it really is fixed Tim Sutton
04:52 AM Bug report #4253 (Fixed for bounty): Fix "value tool" issue with GRASS rasters (and make the plug...
This is fixed please confirm and pay the bounty. Tim Sutton
04:52 AM Bug report #4253 (Fixed for bounty): Fix "value tool" issue with GRASS rasters (and make the plug...
This is fixed please confirm and pay the bounty. Tim Sutton
04:50 AM Bug report #4253: Fix "value tool" issue with GRASS rasters (and make the plugin) core
Giovanni Manghi
03:16 AM Feature request #3628 (Closed): Densify features
New tool added in commit:ad1a4e2cde Alexander Bruy
03:16 AM Feature request #3628 (Closed): Densify features
New tool added in commit:ad1a4e2cde Alexander Bruy
03:14 AM Feature request #4318 (Closed): "Union": after adding the result to TOC/project, the output layer...
Should be fixed in commit:d3fe1941fd Alexander Bruy
03:14 AM Feature request #4318 (Closed): "Union": after adding the result to TOC/project, the output layer...
Should be fixed in commit:d3fe1941fd Alexander Bruy
02:53 AM Feature request #2779 (Closed): batch creation of spatial index (.qix)
New tool added to fTools in commit:48112cc1bc Alexander Bruy
02:53 AM Feature request #2779 (Closed): batch creation of spatial index (.qix)
New tool added to fTools in commit:48112cc1bc Alexander Bruy
02:53 AM Feature request #2779 (Closed): batch creation of spatial index (.qix)
New tool added to fTools in commit:48112cc1bc Alexander Bruy
02:53 AM Feature request #2779 (Closed): batch creation of spatial index (.qix)
New tool added to fTools in commit:48112cc1bc Alexander Bruy
02:25 AM Bug report #4515: Rendering issue with almost cohincident lines
Now that we know the shape of the input, it turns out this is _NOT_ a bug.
Thanks for listening ;P
Sandro Santilli
02:20 AM Bug report #4515: Rendering issue with almost cohincident lines
The actual input shape (was different than I thought)
!https://issues.qgis.org/attachments/3542/topotest.png!
Sandro Santilli
01:46 AM Bug report #4515 (Closed): Rendering issue with almost cohincident lines
The following WKT has a few rendering problems.
It is a V shaped figure. One element is the full V, the other two are...
Sandro Santilli
02:19 AM Bug report #4514: New symbology fails to render "problematic" lines at high zoom levels
!topotest.png! Sandro Santilli
02:13 AM Bug report #4514: New symbology fails to render "problematic" lines at high zoom levels
I was wrong about the actual shape.
Now made a drawing to represent it.
Sandro Santilli
01:44 AM Bug report #4514 (Closed): New symbology fails to render "problematic" lines at high zoom levels
The following WKT has a few rendering problems.
It is a V shaped figure. One element is the full V, the other two are...
Sandro Santilli

2011-11-11

11:08 AM Feature request #4070: copy and paste in map composer
In this patch, copy and paste is implemented, feel free to improve it. It was tested on Ubuntu only. Anna Kratochvilova
08:32 AM Feature request #4321: New tab in raster properties: rasters stats as table
A nice addon to the table of values would be to have also the chance to select a particular raster value and have the... Giovanni Manghi
07:19 AM Bug report #4511: Refresh button doesn't work in QGis Browser for PostgreSQL
Confirmed here, on debian testing Paolo Cavallini
06:38 AM Bug report #4511 (Closed): Refresh button doesn't work in QGis Browser for PostgreSQL
When adding new tables in a PostgreSQL schema I don't see it in the qgis browser. Clicking on "Refresh" doesn't help.... Sandro Santilli
06:47 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Giovanni Manghi wrote:
> Here is an interesting vector
>
> http://www.faunalia.pt/downloads/test_slow_vector.zip
>
...
Martin Dobias
06:43 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Giovanni Manghi wrote:
> The link to that shapefile is no more available, use this instead
>
> http://www.iucnredlis...
Martin Dobias
06:30 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Thaddeus - wrote:
> Load on demand: sounds like the best optimization to me!
>
> I get an eight-time slower performa...
Martin Dobias
02:54 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Here is an interesting vector
http://www.faunalia.pt/downloads/test_slow_vector.zip
it is a (multi)polygon one, jus...
Giovanni Manghi
02:54 AM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Here is an interesting vector
http://www.faunalia.pt/downloads/test_slow_vector.zip
it is a (multi)polygon one, jus...
Giovanni Manghi
05:25 AM Bug report #4381: Saving a shape as DXF ("save as...") leads to corrupted files
From Mick F.
"In regards to Bug #4381 for the Quantum GIS Desktop, the issue is to due with the handle ID created fo...
Giovanni Manghi
03:03 AM Bug report #3842 (Feedback): Missing Icons all element QGIS
Please try a more recent release and leave feedback. Giovanni Manghi
03:03 AM Bug report #3842 (Feedback): Missing Icons all element QGIS
Please try a more recent release and leave feedback. Giovanni Manghi
03:03 AM Bug report #3842 (Feedback): Missing Icons all element QGIS
Please try a more recent release and leave feedback. Giovanni Manghi

2011-11-10

01:45 PM Bug report #1978: QGIS take ages to open big (or just complex) vectors
Load on demand: sounds like the best optimization to me!
I get an eight-time slower performance factor when activati...
Thaddeus -
11:16 AM Bug report #4035: Print Composer shape combo box not refecting current shape
I can reproduce it in 1.7.1 on Ubuntu. The signal @currentIndexChanged@ is connected to 2 slots. I tried to remove co... Anna Kratochvilova
05:15 AM Feature request #4247: Legend - setting for group spacing
Here is the patch for this feature. Please review it, I'm a newbie here. Anna Kratochvilova

2011-11-09

09:55 PM Bug report #1978: QGIS take ages to open big (or just complex) vectors
I suspect, and I might be wrong, that some of the reason that it's slow to open large ogr based layers is because QGI... Nathan Woodrow
01:26 PM Bug report #4509 (Closed): Crash on SPARC when opening vector layer
QGIS crashes with "signal BUS (invalid address alignment)" on Sparc Solaris when opening a shape file. I have tracked... Sam Gillingham
07:39 AM Feature request #4055: Enhancement: display SVG symbols in themed collections instead of all toge...
See also #1066 Alexander Bruy
07:24 AM Feature request #4275 (Closed): Strip off file extension for layer name when adding via the Brows...
Works fine in QGIS 09f98fc
Alexander Bruy
07:24 AM Feature request #4275 (Closed): Strip off file extension for layer name when adding via the Brows...
Works fine in QGIS 09f98fc
Alexander Bruy
07:23 AM Bug report #4507: GEOS spatialindex.h conflicts with SpatialIndex.h
Ah, the OS X framework has geos_c.h along with the C++ headers. This is so that the framework include method works f... William Kyngesburye
07:18 AM Feature request #2972 (Closed): Save and load queries in the provider query builder
Duplicate #2767 Alexander Bruy
07:18 AM Feature request #2972 (Closed): Save and load queries in the provider query builder
Duplicate #2767 Alexander Bruy
07:18 AM Feature request #2972 (Closed): Save and load queries in the provider query builder
Duplicate #2767 Alexander Bruy
07:18 AM Feature request #2972 (Closed): Save and load queries in the provider query builder
Duplicate #2767 Alexander Bruy
07:13 AM Feature request #2072 (Closed): Treeview-GUI for SVG symbol choice
Probably duplicate #1066 Alexander Bruy
07:13 AM Feature request #2072 (Closed): Treeview-GUI for SVG symbol choice
Probably duplicate #1066 Alexander Bruy
07:13 AM Feature request #2072 (Closed): Treeview-GUI for SVG symbol choice
Probably duplicate #1066 Alexander Bruy
06:57 AM Feature request #4058 (Closed): Multi column sort - Attribute table
Seems duplicate #1137 Alexander Bruy
06:57 AM Feature request #4058 (Closed): Multi column sort - Attribute table
Seems duplicate #1137 Alexander Bruy
06:57 AM Feature request #4058 (Closed): Multi column sort - Attribute table
Seems duplicate #1137 Alexander Bruy
05:36 AM Bug report #3786: in the composer, map labels and symbols defined in points/mm should be scaled o...
regis regis wrote:
> I'm interested in contributing to it, i'm not a developper, but I have a budget to have someone ...
Giovanni Manghi
05:36 AM Bug report #3786: in the composer, map labels and symbols defined in points/mm should be scaled o...
regis regis wrote:
> I'm interested in contributing to it, i'm not a developper, but I have a budget to have someone ...
Giovanni Manghi
05:31 AM Bug report #3786: in the composer, map labels and symbols defined in points/mm should be scaled o...
Hi All, users in my company are very annoyed with this problem. We often print A0 posters, and this missing feature i... Regis Haubourg

2011-11-08

08:57 PM Bug report #4504: QGIS fails to print ecw image in composer
Attached is the log file for both A4 and A0.
Seems that createNextPartImage() and readBlock() are called a lot but m...
Nathan Woodrow
08:57 PM Bug report #4504: QGIS fails to print ecw image in composer
Attached is the log file for both A4 and A0.
Seems that createNextPartImage() and readBlock() are called a lot but m...
Nathan Woodrow
07:55 PM Bug report #4504: QGIS fails to print ecw image in composer
I haven't tested it with Linux yet but I'm not sure it is related to being 32bit. I'm only running 32bit XP and uDig... Nathan Woodrow
07:52 AM Bug report #4504: QGIS fails to print ecw image in composer
Does it work on Linux? If yes, then it might be a 32bit issue. My experience is that large scale printing works with ... Marco Hugentobler
05:43 PM Bug report #4507 (Closed): GEOS spatialindex.h conflicts with SpatialIndex.h
When compiling qgsspatialindex.cpp, the there are a lot of parsing errors after the SpatialIndex namespace declaratio... William Kyngesburye
02:56 PM Bug report #4377: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
It seems a more general behavior, see #4379 Giuseppe Sucameli
02:51 PM Bug report #4437 (Closed): DB-Manager: python error
DB Manager plugin is not a core QuantumGIS python plugin so this isn't the right place to open tickets.
I planned to ...
Giuseppe Sucameli
02:51 PM Bug report #4437 (Closed): DB-Manager: python error
DB Manager plugin is not a core QuantumGIS python plugin so this isn't the right place to open tickets.
I planned to ...
Giuseppe Sucameli
02:51 PM Bug report #4437 (Closed): DB-Manager: python error
DB Manager plugin is not a core QuantumGIS python plugin so this isn't the right place to open tickets.
I planned to ...
Giuseppe Sucameli
12:08 PM Bug report #4427: Disable options for interpretation of above/below and distancing when online la...
Sandro Santilli wrote:
> Note that I'm intentionally avoiding the "github way" as I belive it's a bad habit to rely o...
Martin Dobias
07:32 AM Bug report #4427: Disable options for interpretation of above/below and distancing when online la...
Martin Dobias wrote:
> Applied in commit:627d25c6
>
> btw. the easiest way how to provide patches (when you host you...
Sandro Santilli
07:20 AM Bug report #4427 (Closed): Disable options for interpretation of above/below and distancing when ...
Martin Dobias
07:20 AM Bug report #4427: Disable options for interpretation of above/below and distancing when online la...
Applied in commit:627d25c6
btw. the easiest way how to provide patches (when you host your fork on github) is to do ...
Martin Dobias
11:58 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Fixed in commit:c37b63a, better variable naming and added some comments Martin Dobias
11:58 AM Bug report #3643 (Closed): wrong direction of label direction symbol
Fixed in commit:c37b63a, better variable naming and added some comments Martin Dobias
07:34 AM Bug report #3643: wrong direction of label direction symbol
I'm not seeing that from the logs ?
Unless the commit log is broken:
https://issues.qgis.org/projects/quantum-gis/rep...
Sandro Santilli
07:23 AM Bug report #3643 (Open): wrong direction of label direction symbol
Reopening: the fix in commit:697b35a disables the option to set the orientation of the label to be dependent on line ... Martin Dobias
07:23 AM Bug report #3643 (Open): wrong direction of label direction symbol
Reopening: the fix in commit:697b35a disables the option to set the orientation of the label to be dependent on line ... Martin Dobias
10:26 AM Bug report #4506 (Closed): Possible Malformation/redundancy on that PS code inside exported PDF f...
I got into this time ago after noticing a extremely slow-to-render exported PDF file: maybe this has something to do ... Thaddeus -
10:10 AM Bug report #3466: Extremely Bloated PDF Vector Export under Win.
I tried 1.7.1 under Win2k and got a real nice output with a vector trace out of the SHP and everything in place: my ... Thaddeus -
06:00 AM Bug report #4410 (Closed): "forward transform of... failed with error: latitude or longitude exce...
The culprit is the "value tool" plugin. Giovanni Manghi
06:00 AM Bug report #4410 (Closed): "forward transform of... failed with error: latitude or longitude exce...
The culprit is the "value tool" plugin. Giovanni Manghi

2011-11-07

12:17 AM Bug report #4505: Open ESRI Personal Geodatabase (mdb)
please file bugs in English. Jürgen Fischer
12:02 AM Bug report #4505 (Closed): Open ESRI Personal Geodatabase (mdb)
German umlauts (ä, ö, ü) in the path of a ESRI pdgb produce the error message:
invalid datasource
(in German "Ungülti...
Michael Ruckstuhl
07:33 PM Bug report #4504: QGIS fails to print ecw image in composer
This seems to be related to memory.
I can print using a A4 and A3 with nothing else running but anything above A3 an...
Nathan Woodrow
04:36 PM Bug report #4504 (Closed): QGIS fails to print ecw image in composer
I can't seem to print any ecw raster images.
* Export to PDF only exports vector layers.
* Printing to the normal p...
Nathan Woodrow
02:24 PM Bug report #4503 (Closed): Using latest qgis-master, PyQGIS fails to load on Debian wheezy
PyQGIS fails to load when starting QGIS and all of the related PyQGIS plugins are disabled. Seems similar to the reso... poupou -

2011-11-06

02:00 PM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
Haven't heard of any problems with my dynamic lookup fix (it's in my 1.7.1 and dev packages). So, added to master 59... William Kyngesburye
02:00 PM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
Haven't heard of any problems with my dynamic lookup fix (it's in my 1.7.1 and dev packages). So, added to master 59... William Kyngesburye

2011-11-05

06:22 PM Bug report #4426: Add a number_format() function to the QgsExpression
Yes, that's why I said "might" and "something like this". Alister Hood
02:13 PM Bug report #4502 (Closed): Crash - QspatiaLite Upload Table - Use VirtualShape Import ON
The following BUG CRASH of QGIS reports
Using Mac OS X QGIS 1.7.1 - William Kyng.’s Frameworks (Also occurs on QGIS ...
Mars Sjoden

2011-11-04

11:42 PM Bug report #4426: Add a number_format() function to the QgsExpression
Alister, the expression above only adds one thousands separator, it's not recursive.
I.E. the number 12345 properly ...
Mathieu Pellerin - nIRV
01:49 PM Bug report #4426: Add a number_format() function to the QgsExpression
Alister Hood wrote:
> EDIT - there seems to be some bug which stops that exact expression from working (it works OK i...
Alister Hood
07:08 AM Bug report #4495 (Closed): Expression labels fail to show expressions with no field
applied in commit:eb48501 Martin Dobias
07:08 AM Bug report #4495 (Closed): Expression labels fail to show expressions with no field
applied in commit:eb48501 Martin Dobias
03:47 AM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
Opened a new ticket at #4495 and supplied a patch. Nathan Woodrow
03:23 AM Bug report #4501 (Closed): outline of the basic shapes too thick
In the print composer, the outline of the basic shapes is always too thick, even when value is set at 0,00.
1.7.1.
alicebtoklas -
03:00 AM Bug report #4486: Diagrams: export to image or pdf (or direct printing) doesn't respect Print Com...
Same problem for me on ubuntu, only when I use millimeters as unit.
Really annoying.
alicebtoklas -
02:31 AM Bug report #4500 (Closed): Simplify tool freezes QGIS
If I apply the simplify tool form advanced digitizing to an ellipse made with the new Rectangle digitizing plugin, QG... Paolo Cavallini
02:31 AM Bug report #4499 (Closed): Multiple selection of vertices during editing does not work
It is no longer possible to select multiple nodes by Crtl-click during editing Paolo Cavallini
02:16 AM Bug report #4498 (Closed): Add a "deprecated" tag
We should decide a way to deal with buggy plugins. I think fixing most of small issues is a trivial task, but if we c... Paolo Cavallini
02:11 AM Bug report #4497 (Closed): Make list of translators uniform across manuals
Some translations provide a list of translators in the Preamble, while others (it seems the majority) don't. Better u... Paolo Cavallini

2011-11-03

04:37 PM Feature request #4496: Simplify user interface in composer table widget
Also, it might be good to simplify the ui by removing the "show only visible features" checkbox, changing the label b... Alister Hood
04:32 PM Feature request #4496 (Closed): Simplify user interface in composer table widget
(Bug fixed in 8a98069194136c7fd5459971e89935fc2317b9c6)
Also, it might be good to simplify the ui by removing the "s...
Alister Hood
02:40 PM Feature request #4490: World file and Georeferencer
You might want to see #2673
The description seems to indicate that the code is there, but disabled.
Alister Hood
02:11 AM Feature request #4490 (Open): World file and Georeferencer
I often need a world file including rotation, would it be possible
that the Georeferencer plugin had the option of wr...
alobo -
02:26 PM Bug report #4495: Expression labels fail to show expressions with no field
Patch attached Nathan Woodrow
02:26 PM Bug report #4495: Expression labels fail to show expressions with no field
Patch attached Nathan Woodrow
02:26 PM Bug report #4495: Expression labels fail to show expressions with no field
Patch attached Nathan Woodrow
01:54 PM Bug report #4495 (Closed): Expression labels fail to show expressions with no field
Details taken from #4441
Expression labels evaluate expressions like 1+1 in the widget OK but fail to show it on the...
Nathan Woodrow
11:37 AM Bug report #4494 (Closed): SVG icons preview not shown
On two OSX (qgis 1.7.1 and trunk) when adding icons to a print layout, they are not shown in the object properties wi... Paolo Cavallini
07:57 AM Bug report #4479 (Closed): New color ramp... missing at second hit
fixed in commit:8e5aa03 Martin Dobias
07:57 AM Bug report #4479 (Closed): New color ramp... missing at second hit
fixed in commit:8e5aa03 Martin Dobias
07:01 AM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
Confirmed with current development snapshot Paolo Cavallini
01:06 AM Bug report #4487: Crash when splitting polygons in shp file
Sorry. I've now attached the shp I am working on. Ellie Cox

2011-11-02

12:54 AM Bug report #4489 (Feedback): GPS Tracking: segfault on add feature
Jürgen Fischer
12:54 AM Bug report #4489: GPS Tracking: segfault on add feature
Which version did you try? master has some improvements on this - see #4071 Jürgen Fischer
10:28 PM Bug report #4489 (Closed): GPS Tracking: segfault on add feature
Adding a feature to a layer frequently causes QGIS to segfault. I have most often noticed this issue when using the L... Brylie Oxley
10:25 PM Bug report #4488 (Closed): GPS Tracking: blocking
When using the Live GPS Tracking feature, the UI becomes inaccessible whenever new GPS coordinates are being updated.... Brylie Oxley
04:10 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I noticed this too. I think I know what might be causing the issue.
My guess is that how I'm using QgsExpression::e...
Nathan Woodrow
03:53 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
Actually, it seems like the labelling doesn't work with any expression except a field name. e.g. no labels are shown... Alister Hood
03:50 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I guess I should maybe open a new ticket - there is still be a problem for labelling.
As far as I can tell, the fiel...
Alister Hood
06:26 AM Bug report #4441 (Closed): Expression parser: some expressions evaluate to NULL when they shouldn't
Fixed in commit:699694 Martin Dobias
06:26 AM Bug report #4441 (Closed): Expression parser: some expressions evaluate to NULL when they shouldn't
Fixed in commit:699694 Martin Dobias
11:03 AM Bug report #4487: Crash when splitting polygons in shp file
can you attach (a sample of) the offending vector? Giovanni Manghi
10:38 AM Bug report #4487 (Closed): Crash when splitting polygons in shp file
I have noticed that when splitting polygons from a large polygon, then editing the attributes of the new polygons in ... Ellie Cox
10:16 AM Bug report #2669: Empty map composer on reopen project
This bug should be reopened. It still happens in 1.7.1. I also use GNOME environment. alicebtoklas -
09:55 AM Bug report #2205: Symbology size field should not be limited to 4 numbers with 2 decimals
Hi Moritz,
I'm using QGIS v1.8 and v.1.7.1.
I would lie to use your patch there but I don't know how to use it. May...
Alban P
09:48 AM Bug report #4486 (Closed): Diagrams: export to image or pdf (or direct printing) doesn't respect ...
Hi,
I noticed something wired when I'm using diagrams in QGIS(Overlays work great).
In fact, when I'm using diagrams...
Alban P
09:17 AM Bug report #4485 (Closed): Item scale jumps randomly when panning around the map content on the c...
I've come across this a few times and it disappears by itself after using the QGS file for a while: I think this time... Thaddeus -
07:49 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
julie - wrote:
> Hi,
> The idea is to get only a few example of symbols with different sizes in the legend. You usual...
Giovanni Manghi
02:06 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
Hi,
The idea is to get only a few example of symbols with different sizes in the legend. You usually get three, but b...
julie -
06:27 AM Bug report #4483 (Closed): QBrowser: can't enable toolbar after turning it off
fixed in commit:650605 Martin Dobias
06:27 AM Bug report #4483 (Closed): QBrowser: can't enable toolbar after turning it off
fixed in commit:650605 Martin Dobias
01:57 AM Bug report #4483 (Closed): QBrowser: can't enable toolbar after turning it off
QBrowser has single toolbar, which can be turned off from context menu. But there is no way in GUI to turn it on. Use... Alexander Bruy
06:06 AM Feature request #3387: let the user select the color map extreme colors
AFAICS, this feature has not been implemented yet.
Are there other ways to select first/last colors for the ramp?
Giovanni Allegri
06:06 AM Feature request #3387: let the user select the color map extreme colors
AFAICS, this feature has not been implemented yet.
Are there other ways to select first/last colors for the ramp?
Giovanni Allegri
06:06 AM Feature request #3387: let the user select the color map extreme colors
AFAICS, this feature has not been implemented yet.
Are there other ways to select first/last colors for the ramp?
Giovanni Allegri
04:32 AM Feature request #4435: extent snapping options
Hello Paolo,
Ok, thanks! I've checked it out and in fact it works!
Paolo Cavallini wrote:
> AFAIK it is already poss...
elcuco -

2011-11-01

11:45 AM Feature request #4482 (Closed): New feature: show raster values on screen when zoomed-in enough.
Oops, do not know what happened here: created twice the same report #4481: this one is a duplicate and invalid one. Thaddeus -
11:45 AM Feature request #4482 (Closed): New feature: show raster values on screen when zoomed-in enough.
Oops, do not know what happened here: created twice the same report #4481: this one is a duplicate and invalid one. Thaddeus -
11:35 AM Feature request #4482 (Closed): New feature: show raster values on screen when zoomed-in enough.
Please see attached images. Thaddeus -
11:34 AM Feature request #4481 (Open): New feature: show raster values on screen when zoomed-in enough.
Please see attached images. Thaddeus -
11:24 AM Bug report #4472: Single-band Colormap color wrong on one end of color scale.
Well, IMHO, this behavior of the color is very confusing and misleading, enough to be called a bug instead of a new f... Thaddeus -
09:48 AM Feature request #4435 (Closed): extent snapping options
AFAIK it is already possible. Paolo Cavallini
09:48 AM Feature request #4435 (Closed): extent snapping options
AFAIK it is already possible. Paolo Cavallini
09:46 AM Bug report #4480 (Closed): Increase/decrease priority in rule-based rendering
The buttons Increase/decrease priority in rule-based rendering do not work Paolo Cavallini
09:45 AM Bug report #4479 (Closed): New color ramp... missing at second hit
In Vector properties, categorized and graduated styles, if I click on New color ramp..., then cancel, I cannot get th... Paolo Cavallini
09:00 AM Bug report #4478 (Closed): Actions using %% do not work from identify results
Actions that use two percent signs work fine from the attribute table but do not work properly from the identify resu... Gary Sherman
06:52 AM Bug report #4477: Export of xml file containing the list of wms servers is not working
Confirmed also with Ubuntu 11.10 and UbuntuGis Unstable ppa. Luca Casagrande
06:32 AM Bug report #4477 (Closed): Export of xml file containing the list of wms servers is not working
I checked in more than one installation of qgis 1.7.1 under winxp the impossibility to save or import a list of wms s... stefano campus
05:08 AM Feature request #4476 (Feedback): Add a 2 cases if() command to Raster Calculator
An if() command with 2 cases output would be most useful:
if(condition, result1, result2)
where the output valu...
alobo -
05:04 AM Feature request #4475 (Closed): Add Data Type to Raster Calculator
The former plugin Raster Calc had the option of selecting a given Data Type (i.e Int16, Float32 etc)
for the output....
alobo -
04:58 AM Bug report #4474: Raster Calculator makes QGIS crash if output file exists
I mean Raster Calculator makes QGIS crash alobo -
04:56 AM Bug report #4474 (Closed): Raster Calculator makes QGIS crash if output file exists
Instead of prompting whether the file has to be overwritten,
Raster Calculator crashes if output file exists.
Agus
alobo -
03:31 AM Bug report #4215: Abfragen auf Layer aufheben
I can reproduce the behaviour.
Put a query on a vector layer and accept.
Now open the query window again and select ...
peppo -
02:33 AM Bug report #4410: "forward transform of... failed with error: latitude or longitude exceeded limi...
This is confirmed on Linux and Windows, using master, but I think that also happens on 1.7.1 Giovanni Manghi

2011-10-31

12:32 AM Bug report #4473 (Closed): Form annotations broken in master and 1.7.1
The form annotation element does not work anymore in master / 1.7.1 and there are frequent crashes when moving a form... Marco Hugentobler
12:03 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
> I would expect to have the different sizes represented in the legend of the print composer, but this doesn't work.
...
Marco Hugentobler
02:35 PM Bug report #4440 (Closed): Old project message references trac, not redmine
Hi
Ok I have committed your patch with commit:e9ee865f
Thanks!
Regards
Tim
Tim Sutton
06:31 AM Bug report #4440: Old project message references trac, not redmine
I think this should fix it - but note, non-coder and attacking this without a lot of understanding...
-custard
ramon .
11:09 AM Bug report #4472 (Closed): Single-band Colormap color wrong on one end of color scale.
On the raster layer, the value of 10 should have no color, just like the way it is handled on the other end -- 70 val... Thaddeus -
08:47 AM Bug report #4288: Mac OSX Lion GDAL Plugin
I have this error message and another similar one related to OpenLayers classFactory, see Issue #4471.
I'm using Kyn...
Alexandre Leroux
08:46 AM Bug report #4471 (Feedback): OpenLayers classFactory Error on QGIS 1.7.1 Launch on MacOS X Lion
The openlayers plugin is not a core QGIS feature, is a 3rd party tool. Report the issue to the developer of the plugin. Giovanni Manghi
08:44 AM Bug report #4471 (Closed): OpenLayers classFactory Error on QGIS 1.7.1 Launch on MacOS X Lion
Using KyngChaos's QGIS version 1.7.1-3, I get this error on launch, in addition to the error described in bug report ... Alexandre Leroux
08:16 AM Bug report #4439: Crash when changing style in Layer Properties
Martin Dobias wrote:
> btw. when deleting resulution "fixed" change also the status, otherwise the bug will stay mark...
Ivan Mincik
07:54 AM Bug report #4439: Crash when changing style in Layer Properties
btw. when deleting resulution "fixed" change also the status, otherwise the bug will stay marked as closed Martin Dobias
07:50 AM Bug report #4439: Crash when changing style in Layer Properties
oops. commit:50f20c2 should take care of it. Martin Dobias
07:29 AM Bug report #4439: Crash when changing style in Layer Properties
Martin Dobias wrote:
> I can replicate the crash when double clicking layer's symbology items in legend.
>
> Should ...
Ivan Mincik
06:01 AM Bug report #4439 (Closed): Crash when changing style in Layer Properties
I can replicate the crash when double clicking layer's symbology items in legend.
Should be fixed in commit:ed20ff3
Martin Dobias
06:01 AM Bug report #4439 (Closed): Crash when changing style in Layer Properties
I can replicate the crash when double clicking layer's symbology items in legend.
Should be fixed in commit:ed20ff3
Martin Dobias
01:01 AM Bug report #4439: Crash when changing style in Layer Properties
Mars Sjoden wrote:
> Ivan, How are you invoking the Properties Window?
>
> By Double Clicking the TOC Layer or
> Ri...
Ivan Mincik
07:53 AM Bug report #4468 (Closed): Properties Window selecting OK/APPLY randomly Crashes QGIS
This looks like a duplicate of #4439 Martin Dobias
07:53 AM Bug report #4468 (Closed): Properties Window selecting OK/APPLY randomly Crashes QGIS
This looks like a duplicate of #4439 Martin Dobias
02:30 AM Bug report #4468: Properties Window selecting OK/APPLY randomly Crashes QGIS
I cannot confirm such fragility on qgis-master on Ubuntu 64 bit. Would you mind test qgis-master on OsX?
I also fee...
Giovanni Manghi
06:19 AM Bug report #4444 (Closed): Error when loading Python plugins
Martin Dobias
06:19 AM Bug report #4444: Error when loading Python plugins
Patch applied in commit:d8dc04f - thanks for contributing it.
Robin: your problem is unrelated, your installation ma...
Martin Dobias
06:05 AM Bug report #4454 (Closed): multiline labels overlap in the labeling-ng engine
Pull request merged! Martin Dobias
06:05 AM Bug report #4454 (Closed): multiline labels overlap in the labeling-ng engine
Pull request merged! Martin Dobias
05:15 AM Bug report #4470 (Closed): cursor states lost with identify tool on postgis layer
Trying to identify a feature from a postgis layer I get a message:
Warning: Query: CLOSE qgisf2 returned 7 [ERROR: c...
Sandro Santilli
04:42 AM Bug report #4469: Postgis connection lost forever on backend restart.
Same with a single layer (edge_data) and no styling. Sandro Santilli
04:40 AM Bug report #4469: Postgis connection lost forever on backend restart.
My logs:... Sandro Santilli
04:11 AM Bug report #4469: Postgis connection lost forever on backend restart.
Sandro Santilli wrote:
> Still being a problem as 7297b23
> This is against postgresql 8.4
Works fine here - althou...
Jürgen Fischer
03:40 AM Bug report #4469 (Feedback): Postgis connection lost forever on backend restart.
Giovanni Manghi
03:09 AM Bug report #4469: Postgis connection lost forever on backend restart.
Still being a problem as 7297b23
This is against postgresql 8.4
Sandro Santilli
02:53 AM Bug report #4469: Postgis connection lost forever on backend restart.
I'm pretty sure I was using a later version.
Anyway, I'm rebuilding current master and will give it a try.
PS: would...
Sandro Santilli
02:45 AM Bug report #4469 (Closed): Postgis connection lost forever on backend restart.
qgis now reconnects in case of failure (see commit:b86243ed9f6be9766284bc2e8ea82e7d4c0fbb5e) Jürgen Fischer
02:45 AM Bug report #4469 (Closed): Postgis connection lost forever on backend restart.
qgis now reconnects in case of failure (see commit:b86243ed9f6be9766284bc2e8ea82e7d4c0fbb5e) Jürgen Fischer
01:38 AM Bug report #4469 (Closed): Postgis connection lost forever on backend restart.
Restarting the PostgreSQL server puts a QGis instance with PostGIS layers (bound to that specific server) into a sile... Sandro Santilli
02:44 AM Feature request #1810 (Closed): PostGIS connections keepalive
qgis now reconnects in case of failure (see commit:b86243ed9f6be9766284bc2e8ea82e7d4c0fbb5e) Jürgen Fischer
02:44 AM Feature request #1810 (Closed): PostGIS connections keepalive
qgis now reconnects in case of failure (see commit:b86243ed9f6be9766284bc2e8ea82e7d4c0fbb5e) Jürgen Fischer
02:44 AM Feature request #1810 (Closed): PostGIS connections keepalive
qgis now reconnects in case of failure (see commit:b86243ed9f6be9766284bc2e8ea82e7d4c0fbb5e) Jürgen Fischer

2011-10-30

11:46 PM Bug report #4227: Vector layer query fails if SQL text contains not ascii characters (but works i...
I encountered a quite similar issue. When the query on a shape layer (on windows with system encoding) contains speci... peppo -
08:21 PM Bug report #4468 (Closed): Properties Window selecting OK/APPLY randomly Crashes QGIS
Some curious findings just now after reviewing several hours of Screen recordings of using QGIS on various operating ... Mars Sjoden
06:12 PM Bug report #4439: Crash when changing style in Layer Properties
Ivan, How are you invoking the Properties Window?
By Double Clicking the TOC Layer or
Right Clicking and selecting ...
Mars Sjoden
03:50 PM Bug report #4439: Crash when changing style in Layer Properties

> Also, I am able to crash with 'new symbology' just by changing colors (values 'Categorized' by TYPE)
here seems r...
Giovanni Manghi
03:04 PM Bug report #4439: Crash when changing style in Layer Properties
> I have downloaded '110m-admin-0-countries.zip' and did 'unique value' classification by 'TYPE'. Than after few time... Ivan Mincik
03:00 PM Bug report #4439: Crash when changing style in Layer Properties
Mars Sjoden wrote:
> Hello Ivan, if possible to somewhat standardize your debuging of our similar crashing issue, tr...
Ivan Mincik
02:48 PM Bug report #4439: Crash when changing style in Layer Properties
Hello Ivan, if possible to somewhat standardize your debuging of our similar crashing issue, try using the publicly ... Mars Sjoden
02:31 PM Bug report #4439: Crash when changing style in Layer Properties
Giovanni Manghi wrote:
> Hi Ivan, I tried again and again but no crashes. This can be something related to a specific...
Ivan Mincik
02:24 PM Bug report #4439: Crash when changing style in Layer Properties
Hi Ivan, I tried again and again but no crashes. This can be something related to a specific vector?
By the way, whe...
Giovanni Manghi
01:05 PM Bug report #4439: Crash when changing style in Layer Properties
Giovanni Manghi wrote:
> > 1. Launch QGIS
> > 2. Load Vector Layer
> > 3. _*Double Click*_ TOC Layer to Invoke *Prop...
Ivan Mincik
12:52 PM Bug report #4439: Crash when changing style in Layer Properties

> 1. Launch QGIS
> 2. Load Vector Layer
> 3. _*Double Click*_ TOC Layer to Invoke *Properties Window* - ( VS _*Rig...
Giovanni Manghi
12:36 PM Bug report #4439: Crash when changing style in Layer Properties
Another test to try that I have found on Mac OS X.6.8 with QGIS 1.7.1-2 William Kyng's build
And after watching hours...
Mars Sjoden
02:47 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
Gerhardus Geldenhuis wrote:
> I have not used any of the other software packages mentioned so would unfortunetly have...
Giovanni Manghi
02:34 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
I have not used any of the other software packages mentioned so would unfortunetly have no idea. On the whole so far ... Gerhardus Geldenhuis
02:28 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
Gerhardus Geldenhuis wrote:
> I will explain with an example the first image is midway through editing and the second...
Giovanni Manghi
01:19 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
I will explain with an example the first image is midway through editing and the second image is the result. It is pe... Gerhardus Geldenhuis
01:19 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
I will explain with an example the first image is midway through editing and the second image is the result. It is pe... Gerhardus Geldenhuis
01:02 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
Gerhardus Geldenhuis wrote:
> I should have been clearer. The screenshot is in mid-edit so the edit is not finished. ...
Giovanni Manghi
01:00 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
I should have been clearer. The screenshot is in mid-edit so the edit is not finished. I would certainly agree that y... Gerhardus Geldenhuis
05:13 AM Bug report #4462 (Feedback): When drawing a new polygon it inverts existing parts of the polygon
The overlapped part it hasn't a "reverted color" it is (it becomes) a *hole*. The simple features model does not allo... Giovanni Manghi
05:13 AM Bug report #4462 (Feedback): When drawing a new polygon it inverts existing parts of the polygon
The overlapped part it hasn't a "reverted color" it is (it becomes) a *hole*. The simple features model does not allo... Giovanni Manghi
12:56 PM Feature request #4467: Imported GPS data should be automatically grouped
Gerhardus Geldenhuis wrote:
> In what way could I support development of this feature?
http://www.qgis.org/wiki/Bugs...
Giovanni Manghi
12:48 PM Feature request #4467: Imported GPS data should be automatically grouped
The suggestion is not critical to my work it is merely a suggestion from a new user perspective. I believe such a fea... Gerhardus Geldenhuis
05:17 AM Feature request #4467: Imported GPS data should be automatically grouped
I agree that the request is very specific, as for a general use you can already create a group, name it as you want, ... Giovanni Manghi
12:54 PM Feature request #4464: Selection colour could be above polygon points
Turning off editing would defy the point. When I submitted this suggestion I was trying to merge a number of polygons... Gerhardus Geldenhuis
03:50 AM Feature request #4464 (Feedback): Selection colour could be above polygon points
Giovanni Manghi
05:28 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
Marco Hugentobler wrote:
> Not sure what you mean.
> If the size comes from a field, the symbol size will be differe...
Giovanni Manghi
03:48 AM Feature request #4457: Editable "Identify Results< window when Editing
Nathan Woodrow wrote:
> I think we should reopen this as I think this would be a good feature for QGIS. The current ...
Giovanni Manghi

2011-10-29

12:23 AM Feature request #4450: Legend symbols (in print composer) are ignoring the "scale size field" opt...
Not sure what you mean.
If the size comes from a field, the symbol size will be different for every feature. How sho...
Marco Hugentobler
06:49 PM Feature request #4464: Selection colour could be above polygon points
IMO making the polygon edit points below the selection is impractical as it would make editing hard.
This is simply ...
Nathan Woodrow
03:34 PM Feature request #4464 (Closed): Selection colour could be above polygon points
When using the "Select Single Feature" button on a map that is zoomed out it is almost impossible in some case to see... Gerhardus Geldenhuis
06:15 PM Bug report #4454: multiline labels overlap in the labeling-ng engine
Agreed. Now part of pull request. Nathan Woodrow
07:27 AM Bug report #4454: multiline labels overlap in the labeling-ng engine
Hey Nathan, thanks, that was quick :)
It might be good to add this patch to your enable multiline per default pull r...
Mathieu Pellerin - nIRV
06:07 PM Feature request #4457: Editable "Identify Results< window when Editing
I think we should reopen this as I think this would be a good feature for QGIS. The current attribute edit behavior ... Nathan Woodrow
11:53 AM Feature request #4457: Editable "Identify Results< window when Editing
Yah, sorry.
I should have been much much more specific.
To be able to EDIT the attribute values WITHIN the "Identif...
Mars Sjoden
11:40 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing
It is already possible. In the identify window click on "actions", then "edit feature form". Giovanni Manghi
11:40 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing
It is already possible. In the identify window click on "actions", then "edit feature form". Giovanni Manghi
10:59 AM Feature request #4457 (Closed): Editable "Identify Results< window when Editing
Idea
Allow the attribute values within the >Identify Results< window to be editable WHEN editing selected feature.
...
Mars Sjoden
04:58 PM Feature request #4467 (Open): Imported GPS data should be automatically grouped
When I import data from my Garmin GPS I get:
track points
route points
tracks
routes
way points
All of these are sep...
Gerhardus Geldenhuis
03:59 PM Bug report #4466 (Closed): Fixes for "v.what.vect" and "v.generalize" modules in the GRASS plugin
In the GUI files of the two cited modules are needed two simple changes.
For v.what.vect the line
<option key="qvec...
Giovanni Manghi
03:56 PM Bug report #4465 (Closed): patch to update the GRASS plugin to make it cope correctly with the ne...
In the next GRASS release 6.4.2RC2 it will not be allowed anymore to have commands with incomplete or non-sense param... Giovanni Manghi
03:11 PM Feature request #4463 (Closed): Missing Large Icon in Ubuntu Package
I created a shortcut for QGIS in the top panel but the icons appears very pixelated. I suspect it is because there is... Gerhardus Geldenhuis
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...

> When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto...
Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...

> When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto...
Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...

> When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto...
Giovanni Manghi
03:08 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...

> When you right click you get a dialog box showing the attributes that you have defined for the layer and two butto...
Giovanni Manghi
03:04 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
I am suggesting the following:
When you right click you get a dialog box showing the attributes that you have defined...
Gerhardus Geldenhuis
02:58 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
I'm asking because the summary of this ticket need to be changed, seems to me wrong and do not describe well the situ... Giovanni Manghi
02:57 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
Gerhardus Geldenhuis wrote:
> Hi
> Yes, I am aware that the node tool can add new nodes, well I just learned it when...
Giovanni Manghi
02:54 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
Hi
Yes, I am aware that the node tool can add new nodes, well I just learned it when first typing this request. Howe...
Gerhardus Geldenhuis
02:49 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
Gerhardus Geldenhuis wrote:
> It is possible to edit it with the node tool but painful. Yes I can add new nodes and m...
Giovanni Manghi
02:47 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
Gerhardus Geldenhuis wrote:
> It is possible to edit it with the node tool but painful. Yes I can add new nodes and m...
Giovanni Manghi
02:43 PM Feature request #4461: Add a button "continue editing" after right clicking the mouse when digiti...
It is possible to edit it with the node tool but painful. Yes I can add new nodes and manipulate them but I can't get... Gerhardus Geldenhuis
02:34 PM Feature request #4461 (Feedback): Add a button "continue editing" after right clicking the mouse ...
Sorry, one question. After the involuntary right click, which stops editing a geomtery, but not remove it, what is st... Giovanni Manghi
02:18 PM Feature request #4461 (Open): Add a button "continue editing" after right clicking the mouse when...
When you are adding a new polygon and have just painstakingly traced out a new feature and you accidentally right cli... Gerhardus Geldenhuis
02:45 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
Apologies must have missed off the image. Hope it helps to clarify what I mean. Gerhardus Geldenhuis
02:36 PM Bug report #4462: When drawing a new polygon it inverts existing parts of the polygon
can't see any attached image. It would be useful to understand better what do you mean. Giovanni Manghi
02:21 PM Bug report #4462 (Closed): When drawing a new polygon it inverts existing parts of the polygon
When you draw a new polygon it inverts already drawn parts of the polygon back to the layer underneath. I would have ... Gerhardus Geldenhuis
02:35 PM Bug report #4456 (Feedback): Segfault in Ubuntu 11.10 Oneiric Ocelot
Giovanni Manghi
07:43 AM Bug report #4444: Error when loading Python plugins
Robin Lovelace wrote:
> P.S. I'm running Oneric 64 bit.
There are no problems under Oneiric 64bit (I'm using it too)...
Giovanni Manghi
06:23 AM Bug report #4444: Error when loading Python plugins
P.S. I'm running Oneric 64 bit.
Robin Lovelace
06:21 AM Bug report #4444: Error when loading Python plugins
I'm having a similar problem in 1.7.1 (updated just now): when qgis loads I get this complaint:... Robin Lovelace
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...
Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...
Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi
03:06 AM Feature request #3212 (Feedback): Add to the action the choice of Python but getting the code fro...
Please leave feedback after checking if it works already as commented by Cyrus Hiatt Giovanni Manghi

2011-10-28

03:53 PM Feature request #3212: Add to the action the choice of Python but getting the code from a file
If I understand correctly, I think this can already be done. I use the following action in QGIS 1.7.0 to call a pytho... Cyrus Hiatt
03:16 PM Feature request #3136: Update NZ projections for grid transformation support
BTW: I've looked at this issue before and it does seem like there isn't an easy fix.
As far as I can see the proj4 e...
Jeremy Palmer
01:45 PM Feature request #3136: Update NZ projections for grid transformation support
Hi Alister,
I think the best option is to patch NZGD49 based proj.4 and gdal definitions upstream so that the nzgd2k...
Jeremy Palmer
07:53 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
you may want to try a Virtual Machine first ;) there are plenty already available made with different Linux distribut... Giovanni Manghi
06:35 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
It started today, and it doesn't go away. My ubuntu is 11.10 amd64 and I installed qgis both from the ubuntugis ppa (... Matteo Fortini
06:13 AM Bug report #4456: Segfault in Ubuntu 11.10 Oneiric Ocelot
I am running QGIS-master on Ubuntu 11.10 (on different machines) and I don't see this problem. Clean install? from th... Giovanni Manghi
06:11 AM Bug report #4456 (Closed): Segfault in Ubuntu 11.10 Oneiric Ocelot
QGis randomly segfaults, for example while switching back to "old symbols" for a layer, or reopening a project.
While...
Matteo Fortini
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine
Patch for fix. Nathan Woodrow
06:25 AM Bug report #4454: multiline labels overlap in the labeling-ng engine
Patch for fix. Nathan Woodrow
05:46 AM Bug report #4011: Map canvas flickers when content is dragged
I see it too... but I am almost sure that until a few days ago (qgis master on Ubuntu) it wasn't doing it.
Tim Sutt...
Giovanni Manghi
05:42 AM Bug report #4011: Map canvas flickers when content is dragged
I can replicate on ubuntu 11.10 running xfce4
see
http://www.youtube.com/watch?v=w3xO21xXxeI
Tim Sutton
05:27 AM Bug report #4439: Crash when changing style in Layer Properties
marsofearth - wrote:
> Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a...
Ivan Mincik

2011-10-27

01:06 AM Feature request #3742: Save extent after reprojection
N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:06 AM Feature request #3742: Save extent after reprojection
N.B. As well as being a more generally user friendly behaviour, this would fix what I suspect is the most common caus... Alister Hood
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
Duplicate #3742 Alexander Bruy
01:04 AM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
Duplicate #3742 Alexander Bruy
11:40 PM Feature request #4455: Feature: update map extent when changing project CRS
Sorry, I'm not sure whether the right category is Gui or Projection Support or what. Alister Hood
11:39 PM Feature request #4455 (Closed): Feature: update map extent when changing project CRS
(I thought there was already a ticket for this, but I can't find it)
Currently, if on-the-fly CRS conversion is enab...
Alister Hood
12:19 AM Feature request #3136: Update NZ projections for grid transformation support
Hi Jeremy,
Are you aware that when QGIS is installed now (unless installing from source) the srs.db is automatically ...
Alister Hood
12:09 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
If anyone is coming to this cold, some of the history of the syncing can be found at #3645 Alister Hood
09:06 PM Bug report #4454: multiline labels overlap in the labeling-ng engine
The code should be:... Mathieu Pellerin - nIRV
08:52 PM Bug report #4454: multiline labels overlap in the labeling-ng engine
I'm pretty sure I found the problem.
The multiline label's width is determined in the void QgsPalLayerSettings::calc...
Mathieu Pellerin - nIRV
08:24 PM Bug report #4454 (Closed): multiline labels overlap in the labeling-ng engine
The recently added expression-based label feature exposed an issue with multiline support in the labeling-ng engine.
...
Mathieu Pellerin - nIRV
08:05 PM Bug report #4453 (Closed): Relative symbol angle overridden by layer angle
When I create a symbol with different symbol layers, I can put a relative angle between them (say, two triangles with... Leyan Ouyang
07:59 PM Bug report #4452 (Closed): Encoding issue in Metadata tab
If path to file contains cyrillic symbols then in metadata tab it looks gibberish. dr -
07:45 PM Bug report #4133: Identify results - previous state (location, docked status, size) is not saved
Possibly also related to #4019. Alister Hood
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...
Seems duplicates #206 Alexander Bruy
10:40 AM Bug report #4133 (Closed): Identify results - previous state (location, docked status, size) is n...
Seems duplicates #206 Alexander Bruy
04:38 PM Bug report #4439: Crash when changing style in Layer Properties
Out of curiosity, Are you able to replicate this if you Only open the Properties Window for a selected shapefile, do... Mars Sjoden
04:18 PM Bug report #4451 (Closed): (regression) Inconsistent behavior in the table of attributes after di...
The issue is rather easy to replicate but I can't find the proper words to describe it briefly, so I'll list instead ... Giovanni Manghi
01:31 PM Bug report #4293: QGIS crashes when applying Graduated Symbol symbology.
added debug output
Also finding similar issues on Ubuntu 11.04 with 1.7.1, Fedora 15 with 1.7.1, and OpenSUSE 11. Ra...
Mars Sjoden
12:52 PM Bug report #3497: [OsX] Crash when changing font and color in Style manager on OS X
jeronimo diaz wrote:
> Hello ! This is my first time here, I'm not english native speaker but I'm willing to enter t...
Mars Sjoden
11:36 AM Bug report #4171 (Closed): outline width of ellipse marker not properly rendered when printing to...
Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:34 AM Bug report #3817 (Closed): NULLifying raster does not work anymore
Duplicate #3840 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:24 AM Bug report #3348 (Closed): GDAL TIFF dataset masking not fully supported
Duplicate #2491 Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel
Applied in commit:b0112f1c42. Alexander Bruy
11:19 AM Bug report #2491 (Closed): Raster transparency doesn't handle alpha channel
Applied in commit:b0112f1c42. Alexander Bruy
11:15 AM Feature request #1609: QGIS4INSPIRE
Seems that we already have several plugins related to metadata: MetaEdit, Metatools and CSWClient Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS
There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
11:14 AM Feature request #1399: Metadata management in QGIS
There is also Metatools plugin developed be NextGIS (see http://gis-lab.info/qa/metatools-eng.html) Alexander Bruy
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size
see also #4133 Giovanni Manghi
10:43 AM Bug report #206: Various dialog boxes don't remember their location and size
see also #4133 Giovanni Manghi
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin
Yes, thanks. Paolo Cavallini
09:57 AM Feature request #3382 (Closed): Include Orfeo Toolbox plugin
Yes, thanks. Paolo Cavallini
09:54 AM Feature request #3382: Include Orfeo Toolbox plugin
Can we close this ticket? Orfeo Toolbox modules now available with as ProcessingFramework module Alexander Bruy
06:45 AM Feature request #4450 (Open): Legend symbols (in print composer) are ignoring the "scale size fie...
As result all the symbols do show of the same size. Giovanni Manghi

2011-10-26

08:31 PM Bug report #4011: Map canvas flickers when content is dragged
Just wanted to update this issue as it is still a big problem on Ubuntu. The MapCanvas still flickers constantly as t... sowelu -
05:39 PM Bug report #4449: strange behaviour of piechart function of QGIS
I can confirm. The pink one at the top should have nothing, or at least see though.
!http://i.imgur.com/RymUg.png!
...
Nathan Woodrow
08:15 AM Bug report #4449: strange behaviour of piechart function of QGIS
Giovanni Manghi wrote:
> Can you please attach a small sample of your data?
I can give it to you tomorrow morning, b...
lokheart _
08:06 AM Bug report #4449: strange behaviour of piechart function of QGIS
Can you please attach a small sample of your data? Giovanni Manghi
08:04 AM Bug report #4449 (Closed): strange behaviour of piechart function of QGIS
I am using QGIS to visual health status of elderly in an elderly home, whether they have medical devices or not is on... lokheart _
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
07:47 AM Feature request #3200: Feature cache
Tagged to 2.0
I would like to underline, without boring anyone :), that improving QGIS performances with large vecto...
Giovanni Manghi
06:36 AM Feature request #3200: Feature cache
I would change the expected version for this patch to 2.0.0, waiting to include it along the multi threaded rendering Giovanni Allegri
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
07:44 AM Bug report #4433: Edit vertex tool very slow
This is easily confirmed and the reason seems to be something related to the (pseudo)topological editing features. In... Giovanni Manghi
06:46 AM Bug report #4442: Multi line labels render on one line with curved labels
The curved placement is not really meant to draw multiline labels: each character of the text is rotated to have base... Martin Dobias
04:26 AM Feature request #4448 (Open): add resample option/tool to gdal tools
I suggest to add another option to those listed in #2930, to let users create a resampled raster setting the output p... Giovanni Allegri
02:22 AM Bug report #4447 (Closed): basic statistics not available for joined attributes
* Load a vector file.
* Load a dbf with attributes
* Join the dbf to the vector file
* Use Vector->Analysis tools->Ba...
mlennert -

2011-10-25

12:56 AM Bug report #1389: The config file (/grass/config/default.qgc) not found
I have recently downloaded qgis from git and compiled and I can confirm this behaviour on my computer too. When I try... Anna Kratochvilova
12:49 AM Bug report #4444 (Closed): Error when loading Python plugins
On QGIS start-up Python error has occurred.
Message from Python error window:...
Vaclav Petras
11:57 PM Bug report #4443 (Closed): WMS 1.3.0 axis order
In WMS 1.3.0 the axis order of a lot of SRS has changed.
Several GIS Packages have been modified to correctly implem...
Jeff Konnen
07:29 PM Feature request #3200: Feature cache
+1 to this
This patch plus the multi-threaded rendering could add some good speed to QGIS.
Nathan Woodrow
04:12 PM Bug report #2352 (Closed): map is drawn twice on toggling a layer's visibility
Giovanni Manghi
04:02 PM Bug report #4442 (Closed): Multi line labels render on one line with curved labels
If you have a multi line label and use curved labeling the label will be rendered on one line ignoring the multi line... Nathan Woodrow
03:51 PM Bug report #4393: Rasterlite layers on Windows as 0,0,0
Confirmed with the laster trunk/osgeo4w. Works fine on trunk/Linux (Ubuntu) Giovanni Manghi

2011-10-24

01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
01:56 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
Behavior changed by Marco in fecb0de028a83bcd6768cbb5663f2439bd2f920f Thanks! Giovanni Manghi
04:49 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...
http://lists.osgeo.org/pipermail/qgis-user/2011-October/013940.html
7 feedback, all positive, until now.
Giovanni Manghi
03:54 AM Feature request #4432: changing the default behavior for "coordinate reference system of new laye...
The issue has been discussed in the QGIS-USERS mailing list and all the feedback have been in favor of this change. Giovanni Manghi
03:53 AM Feature request #4432 (Closed): changing the default behavior for "coordinate reference system of...
My point of view, after giving many training courses, is that the default option should be changed to "prompt for CRS... Giovanni Manghi
12:54 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Jürgen Fischer wrote:
> Alister Hood wrote:
> > I have spent some more time trying to understand this.
> > For the re...
Alister Hood
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:58 PM Bug report #4441: Expression parser: some expressions evaluate to NULL when they shouldn't
I have just changed the title because it's related to the underlying expression parser more then anything else. Nathan Woodrow
11:49 PM Bug report #4441 (Closed): Expression parser: some expressions evaluate to NULL when they shouldn't
example 1:
I can create a string attribute field called "test1" and fill it using @$perimeter@
I can then fill it usi...
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
11:28 PM Feature request #2225 (Closed): Regular expressions support for field calculator
regexp_replace() was implemented a few months back - see #4099.
Alister Hood
10:59 PM Bug report #4425: Add a capitalize() function to the expression based labeling engine
Martin,
Seems that MS SQL doesn't have a function. You have to define your own :S I suggest we follow postgresql an...
Nathan Woodrow
10:58 PM Bug report #4440 (Closed): Old project message references trac, not redmine
When opening a project file from a previous version of QGIS a message is displayed.
As at 1.8.0-116 this still refe...
ramon .
10:52 PM Bug report #4426: Add a number_format() function to the QgsExpression
Just changed the header as it's more related to the expression parser itself rather than the labeling per sa Nathan Woodrow
10:41 PM Bug report #4426: Add a number_format() function to the QgsExpression
Also note that there is a "formatted numbers" section in the main labelling dialogue under "label settings", and:
1) ...
Alister Hood
10:37 PM Bug report #4426: Add a number_format() function to the QgsExpression
This would be an important feature. In the meantime you might be able to achieve what you need using something like ... Alister Hood
02:32 PM Bug report #4439 (Closed): Crash when changing style in Layer Properties
My QGIS is frequently crashing when changing Styles in Layer Properties.
I see many possibly related issues to this o...
Ivan Mincik
12:36 PM Bug report #4409 (Closed): Weird behaviour on Mac OS
Giovanni Manghi
12:31 PM Bug report #4409: Weird behaviour on Mac OS
You are right thanks. It just didn't come to my mind, sorry.
Thanks again
Dejan Gambin
08:14 AM Bug report #4409: Weird behaviour on Mac OS
That's full-screen mode. You must have hit apple-F at some point. Apple-F again should return you to windowed mode. William Kyngesburye
07:04 AM Bug report #4409: Weird behaviour on Mac OS
Unfortunatelly I have only one Mac. Maybe I can ask someone to give it a try, but not sure :-( Dejan Gambin
07:01 AM Bug report #4409: Weird behaviour on Mac OS
Dejan Gambin wrote:
> Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
>...
Giovanni Manghi
06:53 AM Bug report #4409: Weird behaviour on Mac OS
Yes, I have recently installed 1.8 developer version from Kyngchaos and 1.7 also before that.
One possible related t...
Dejan Gambin
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS
Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal...
Giovanni Manghi
06:42 AM Bug report #4409 (Feedback): Weird behaviour on Mac OS
Did you installed QGIS with the packages available here?
http://www.qgis.org/wiki/Download#MacOS_X
I made an instal...
Giovanni Manghi
12:31 PM Feature request #4365: Add log/ln functions to the field calculator
Nathan's new expression builder (developed for expression-based labeling) should be integrated into field calculator ... Martin Dobias
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator
They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
08:25 AM Feature request #4365 (Open): Add log/ln functions to the field calculator
They should be exposed somehow in the GUI, otherwise will remain hidden to the user. Paolo Cavallini
11:19 AM Feature request #4438 (Closed): Option to add datasources icons beside layer names in the TOC
QGIS can use a large number of datasources: file based rasters, shapes, spatialite, postgis, postgis rasters, grass, ... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
11:15 AM Feature request #2389 (Closed): function to create simple geometries, square, rectangle, triangle
There are now 2 3rd party plugins that allow to digitize simple geometries: "rectangles, ovals and diamonds" and "rec... Giovanni Manghi
10:33 AM Bug report #4437 (Closed): DB-Manager: python error
Hi,
opening the db-manager plugin and try-ing to open a postgis connection,
I see this python error:...
aperi2007 -
08:44 AM Feature request #4436 (Closed): snapping when moving
Snapping doesn't work when moving a feature. For example, if I move a feature towards another, it doesn't snapp even ... elcuco -
08:37 AM Feature request #4435 (Closed): extent snapping options
hello!
It would be a great feature if the "Avoid intersection" in the "Snapping Options" could work even between diff...
elcuco -
08:23 AM Bug report #4433: Edit vertex tool very slow
Also on Debian, and Windows 7 and Vista, apparently Paolo Cavallini
03:56 AM Bug report #4433 (Closed): Edit vertex tool very slow
Dear developers,
we noticed that the tool for the vertex edit since the version 1.5 is very slow.
When we try to edit...
Marica Landini bulma
08:18 AM Bug report #4420 (Closed): Editing label properties makes labels disappear
Paolo Cavallini
06:17 AM Bug report #4420 (Feedback): Editing label properties makes labels disappear
I cannot confirm on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
08:03 AM Bug report #4421: Raster are very slow to load when calculating stats
The raster has a colour table, so stretching does not apply Paolo Cavallini
08:00 AM Bug report #4421: Raster are very slow to load when calculating stats
Maybe this is because in one PC contrast enhancement is set to something different than "No Stretch" (see #3867). Try... Alexander Bruy
07:06 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats
Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:03 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:59 AM Bug report #4421: Raster are very slow to load when calculating stats
Verified: on one machine it is slow, on another is fast. It might depend on some setting, still to understand which Paolo Cavallini
06:09 AM Bug report #4421 (Feedback): Raster are very slow to load when calculating stats
Not confirmed here with qgis-trunk on Ubuntu 11.10, the linked sample data is still lightning fast to open. Please le... Giovanni Manghi
07:07 AM Bug report #4422 (Closed): Tileslider not working
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
07:07 AM Bug report #4422 (Closed): Tileslider not working
I remember it was working with OSM layers, but I may be wrong Paolo Cavallini
06:06 AM Bug report #4422 (Feedback): Tileslider not working
Not confirmed here. It works only if the WMS server is a tiled one, like a tileache one. Try this:
http://tilecache...
Giovanni Manghi
06:39 AM Bug report #4415 (Feedback): Centroid in fTools different form centroid fill
The explanation of the different behavior has benn given in the dev mailing list, closing? Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:53 AM Bug report #4428: Diagram overlays not displaying when render caching is on
Confirmed on qgis-trunk on Ubuntu 11.10 Giovanni Manghi
05:49 AM Feature request #4430: Zonal statistics: please add more variables
These are the methods available in GRASS for zonal statistics
http://grass.fbk.eu/grass64/manuals/html64_user/r.stat...
Giovanni Manghi
04:19 AM Bug report #4434 (Closed): "project properties" and menu icons missing from QGIS when using UNITY...
"project properties" misses from both the "file" and the "settings" menus.
The icons problem surfaced on Ubuntu als...
Giovanni Manghi

2011-10-23

05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:37 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
That documentation page is obsolete, see the QGIS manual page 93. QGIS-Server only implements wms 1.3 Giovanni Manghi
05:29 AM Bug report #4431 (Closed): QGIS maoserver doesn't provide WMS Version 1.1.1
It's said about QGIS mapserver that it implements WMS 1.3 as well as 1.1.1 [1]. But the GetCapabilities XML always se... Marco Lechner

2011-10-22

12:56 AM Feature request #4430 (Closed): Zonal statistics: please add more variables
e.g.
MAJORITY
MAXIMUM
MEDIAN
MINIMUM
MINORITY
RANGE
STD
VARIETY
See:
http://resource...
Paolo Cavallini
12:52 AM Feature request #4429 (Closed): Zonal statistics: please add checkbox
It would be good to have checkboxes to select only the stats of interest, not being forced to calculate them all Paolo Cavallini
09:14 PM Bug report #4428 (Closed): Diagram overlays not displaying when render caching is on
Diagram layers do not display when "Use render caching where possible to speed up redraws" is checked.
Issue is in bo...
Jesse Sheffield
02:34 PM Bug report #4427 (Closed): Disable options for interpretation of above/below and distancing when ...
The following changes since commit:a2a6e78675833a4db0286a85354bf168032d2b49:
Juergen E. Fischer (1):
more c...
Sandro Santilli
08:24 AM Bug report #4425: Add a capitalize() function to the expression based labeling engine
A little bit of research on function name in other SQL databases:
postgresql, oracle: initcap( x )
mysql, ms sql: no...
Martin Dobias
03:41 AM Bug report #4425 (Closed): Add a capitalize() function to the expression based labeling engine
This probably doesn't require a long description. It'd be useful for the expression based labeling engine to have a c... Mathieu Pellerin - nIRV
08:12 AM Bug report #3643: wrong direction of label direction symbol
Fix pushed to master as r697b35a4.
Sandro Santilli
06:21 AM Bug report #3643: wrong direction of label direction symbol
My "dirsym" branch implements solution 2 of Mayeul (as per this ticket subject).
For solution 1 see bug #4424
Sandro Santilli
06:19 AM Bug report #3643: wrong direction of label direction symbol
The following changes since commit 59be561a4d9100fb2084006c2acc7df5798c52fc:
Juergen E. Fischer (1):
fix wa...
Sandro Santilli
06:12 AM Bug report #3643: wrong direction of label direction symbol
I don't really get the meaning of "Map" vs. "Line" orientation, btw Sandro Santilli
06:07 AM Bug report #3643: wrong direction of label direction symbol
How do we reopen this bug ? I personally can't change the "Status" field. Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol
Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not...
Sandro Santilli
02:55 AM Bug report #3643: wrong direction of label direction symbol
Gah. I confirm this is still broken.
First of all direction symbol is only shown with with "parallel" placement (not...
Sandro Santilli
02:51 AM Bug report #3643: wrong direction of label direction symbol
Mayeul: I've filed #4424 for your request. This bug was specifically about the "Add direction symbol".
By the way, n...
Sandro Santilli
05:52 AM Bug report #4284 (Closed): error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Giuseppe Sucameli
05:49 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Pushed to master by Jef (thanks!).
926b3888a15a25eb4f15d5b3fdc62a08016b20c3
d7b106fed347c4d7dcae546cb65a9a2dd6619ab0
Sandro Santilli
05:32 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Here (Ubuntu 11.04 and QT 4.7.2) the compilation still works fine and ends without errors before and after your fix. Giuseppe Sucameli
05:19 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
Branch updated to include a version check:
The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd...
Sandro Santilli
05:07 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
The following changes since commit 232f1617614678115e6c42431a5976fc21f1dd4e:
marco (1):
Fix for ticket #441...
Sandro Santilli
04:25 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
4.6.2-0ubuntu5.3 is the version in here Sandro Santilli
04:22 AM Bug report #4284: error: ‘qt_metatype_id’ is not a member of ‘QMetaTypeId<QVariant>’
It may be a QT bug (QT < 4.7.1), see https://bugreports.qt.nokia.com/browse/QTBUG-8549 Giuseppe Sucameli
03:47 AM Feature request #3488: Expression based labeling
Nathan, good idea.
Bug #4425: capitalize() function
Bug #4426: number_format() function
Cheers.
Mathieu Pellerin - nIRV
03:15 AM Feature request #3488: Expression based labeling
nirvn, no worries, Hopefully people find it useful. I would open a ticket if you want some other functions added.
M...
Nathan Woodrow
03:45 AM Bug report #4426 (Closed): Add a number_format() function to the QgsExpression
It'd be very useful for have a number_format() function to allow formatting of numbers with grouped thousands. For ex... Mathieu Pellerin - nIRV
02:58 AM Bug report #4424: Label orientation is limited in the left-to-right range
The reference link didn't show up properly, here it is again: #3643 Sandro Santilli
02:49 AM Bug report #4424 (Closed): Label orientation is limited in the left-to-right range
Labels (new symbology, aka ABC) can't be forced to follow line orientation, specifically written upside-down when a l... Sandro Santilli

2011-10-21

01:24 AM Feature request #3843: Rule based labeling
Also, in order for this to be satisfying for the need expressed in #3796, every label "class" will need to be configu... Sandro Santilli
01:16 AM Feature request #3843: Rule based labeling
The cherry-on-cake would then be associating "rules" to "legend items" so that you can toggle visibility of single cl... Sandro Santilli
12:51 AM Bug report #4413: Generating SVG preview takes very long
Wouldn't it be more appropriate to generate the previews during compilation? In my case it takes several minutes to g... Paolo Cavallini
01:51 PM Bug report #4413: Generating SVG preview takes very long
Well, the tmore preview directories / files you have, the longer it takes (with only the standard svg dirs enabled, i... Marco Hugentobler
02:10 AM Bug report #4413 (Closed): Generating SVG preview takes very long
When adding an image to a print layout, the generation of preview from SVG takes a very long time Paolo Cavallini
12:35 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown
Fixed in 232f1617614678115e6c42431a5976fc21f1dd4e Marco Hugentobler
02:11 AM Bug report #4414 (Closed): SVG indicators for arrows are not shown
If I choose an svg indicator for the beginning and end of an arrow, nothing is shown Paolo Cavallini
11:30 PM Feature request #3488: Expression based labeling
Nathan, IMO a capitalize('string') function would be really, really useful alongside uppercase / lowercase. Mathieu Pellerin - nIRV
10:58 PM Feature request #3488: Expression based labeling
Nathan, thanks a gazillion times for this. Mathieu Pellerin - nIRV
08:11 AM Feature request #3488 (Closed): Expression based labeling
The pull request merged. Good work, Nathan! Martin Dobias
08:11 AM Feature request #3488 (Closed): Expression based labeling
The pull request merged. Good work, Nathan! Martin Dobias
10:20 AM Feature request #3483: Unified topological editing
FYI: I've started a project on github for postgis topology editing. At least will serve for brainstorming.
https://g...
Sandro Santilli
03:38 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
Alister Hood wrote:
> I have spent some more time trying to understand this.
> For the record:
> - srs.db is not sync...
Jürgen Fischer
03:09 AM Bug report #4423 (Closed): "Invert colour map" checkbox loses the right state
Invert colour map checkbox (in raster properties) option is bugged: the flag is unchecked when re-opening the raster ... Paolo Cavallini
03:07 AM Bug report #4422 (Closed): Tileslider not working
The tile scale apparently does not work Paolo Cavallini
03:04 AM Bug report #4421 (Closed): Raster are very slow to load when calculating stats
Rasterlite layers, e.g. http://download.gfoss.it/TrueMarble/TrueMarble-2km.sqlite are extremely slow to open (I remem... Paolo Cavallini
03:02 AM Bug report #4420 (Closed): Editing label properties makes labels disappear
If I edit label properties with the button (close to rotate label), the label disappears Paolo Cavallini
03:01 AM Bug report #4419 (Closed): Improve random colour ramps
The random colour ramps are generally ugly, and often colours are repeated Paolo Cavallini
03:00 AM Bug report #4418 (Closed): Random colour ramp: randomize missing
A button "Randomize" is missing for random colour ramps (currently one has to change the number of classes to have a ... Paolo Cavallini
02:59 AM Bug report #4417 (Closed): editing widgets: "slider range" and "dial range" do not show any value...
In the editing widgets, the "slider range" and "dial range" widgets do not show any value when moving or rotating (by... Paolo Cavallini
02:59 AM Bug report #4416 (Closed): Measure area wrong if ellipsoid off
The measure area tool seems to be wrong when started with the ellipsoid off (measures are doubled); switching ellipso... Paolo Cavallini
02:57 AM Bug report #4415: Centroid in fTools different form centroid fill
From the ML (thanks cfarmer):
IIRC, the centroid as returned by fTools is based on the GEOS centroid
calculation, wh...
Paolo Cavallini
02:56 AM Bug report #4415 (Closed): Centroid in fTools different form centroid fill
the centroid, as calculated by fTools, is not in the same location as the centroid shown by the centroid fill. The di... Paolo Cavallini

2011-10-20

01:40 AM Bug report #4404: NZMG and other NZGD49 based CRSs are wrong
I have spent some more time trying to understand this.
For the record:
- srs.db is not synced when installing from so...
Alister Hood
 

Also available in: Atom