Activity

From 2014-12-02 to 2014-12-31

2014-12-31

07:57 PM Bug report #10392 (Closed): Ellipsoid for measurement keeps getting reset
Fixed in changeset commit:"c5b5eee183dbc690767cce2ad4cda5b06d328f8d". Nathan Woodrow
07:43 PM Bug report #11713: Measure tool ellipsoid defaults to 'None/Planametric' regardless of previous e...
As a side note: Does the ellipsoide picker even belong there. I would say something like that should be in the measu... Nathan Woodrow
07:32 PM Bug report #11713 (Closed): Measure tool ellipsoid defaults to 'None/Planametric' regardless of p...
This is a duplicate of #10392 so lets just keep that one open for now. Nathan Woodrow
07:32 PM Bug report #11713 (Closed): Measure tool ellipsoid defaults to 'None/Planametric' regardless of p...
This is a duplicate of #10392 so lets just keep that one open for now. Nathan Woodrow
12:03 PM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
For those who still want to keep system wide native rendering but have latest Qgis working properly you can create a ... Bogdan Hlevca
11:28 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Blending is disabled in native mode
[[http://doc.qt.digia.com/4.6/qpainter.html#beginNativePainting]]
you obviously...
Bogdan Hlevca
10:43 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
My worst suspicions were confirmed. Well, I guess in the end it is a QT bug and I found this based on you last commen... Bogdan Hlevca

2014-12-30

02:24 PM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
I'm stumped - do you have hardware acceleration available? I can't think of any other reason why Qt wouldn't support ... Nyall Dawson
08:50 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Actually I get this message in 2.4 as well, but it happens earlier ... Bogdan Hlevca
07:45 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
I get this error that appears when I switch to Zebra.... Bogdan Hlevca
07:35 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Of course I set it to Render, with Rectangle the map does not get drawn. And this project was creates in 2.6.1 which ... Bogdan Hlevca
02:08 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Works fine here too (Ubuntu 14.10). Did you change the render method for the map item from "Rectangle" to "Render" or... Nyall Dawson
08:07 AM Bug report #11910: in case of rotation zoom by rectangle shows artifacts
I've a fix for this issue, but it builds on the workaround to limitation of QgsMapCanvasItem::setRect which was repor... Sandro Santilli
07:38 AM Bug report #11317 (Closed): PostGIS views not handled correctly
Harry Clarke wrote:
> So what are you supposed to do in a view that has no unique column?
Change the view.
> Why do...
Jürgen Fischer
07:38 AM Bug report #11317 (Closed): PostGIS views not handled correctly
Harry Clarke wrote:
> So what are you supposed to do in a view that has no unique column?
Change the view.
> Why do...
Jürgen Fischer
07:38 AM Bug report #11317 (Closed): PostGIS views not handled correctly
Harry Clarke wrote:
> So what are you supposed to do in a view that has no unique column?
Change the view.
> Why do...
Jürgen Fischer
07:38 AM Bug report #11317 (Closed): PostGIS views not handled correctly
Harry Clarke wrote:
> So what are you supposed to do in a view that has no unique column?
Change the view.
> Why do...
Jürgen Fischer
07:13 AM Bug report #11930: Selection in rotated maps does not work always as expected
Nevermind, I tried myself and confirm it works with rotation non-active. While the "Coordinate" widget shows the _sam... Sandro Santilli
06:59 AM Bug report #11930: Selection in rotated maps does not work always as expected
Did you verify those "unselectable" polygons to be selectable while rotation is not active ? Sandro Santilli
05:27 AM Bug report #11930 (Closed): Selection in rotated maps does not work always as expected
see attached screencast Giovanni Manghi
03:01 AM Bug report #11816 (Closed): Panning from the overview map reduces the scale (zooms out) when map ...
Fixed with commit 5a1df4a2d5827252e2513a66d028af58cce1216f
Sandro Santilli
03:01 AM Bug report #11816 (Closed): Panning from the overview map reduces the scale (zooms out) when map ...
Fixed with commit 5a1df4a2d5827252e2513a66d028af58cce1216f
Sandro Santilli
02:24 AM Bug report #11815: Feature highlight from Identify features misplaced on rotation
Giovanni please file another ticket if the selection tool does not work correctly.
My observation was about the highl...
Sandro Santilli
01:27 AM Bug report #11815: Feature highlight from Identify features misplaced on rotation
Sandro Santilli wrote:
> Note that the feature selection highlight (from select features tool) renders correctly (in ...
Giovanni Manghi
02:21 AM Feature request #11923: output in 3D pdf
See this example . On adobe pro page , is a special PDF output for 3d info -
the format is U3D third edition or PRC...
BRUNO BELLAZZI
02:11 AM Bug report #11899: Coordinates issue in print composer
Try changing the coordinate format. You shouldn't be using degrees/minutes with projected coordinates. Nyall Dawson
02:02 AM Feature request #11929 (Closed): Show feature selection into Composer
Showing a selection in composer was a bug which was fixed for 2.4 - which is why that stackexchange method no longer ... Nyall Dawson
02:02 AM Feature request #11929 (Closed): Show feature selection into Composer
Showing a selection in composer was a bug which was fixed for 2.4 - which is why that stackexchange method no longer ... Nyall Dawson
01:45 AM Feature request #11929: Show feature selection into Composer
For some users (who using a GIS like a simple viewer) is really useful. He didn't want explore symbology. Loïc BARTOLETTI
01:23 AM Feature request #11929: Show feature selection into Composer
The map selection (not the identify highlighting as described in that stackexchange post) did show in the composer un... Giovanni Manghi

2014-12-29

12:08 AM Feature request #11929 (Closed): Show feature selection into Composer
I don't know why, but i can't reproduce this (http://gis.stackexchange.com/questions/95498/how-to-bring-feature-selec... Loïc BARTOLETTI
12:06 AM Bug report #11713: Measure tool ellipsoid defaults to 'None/Planametric' regardless of previous e...
Hi Leme
Lene Fischer wrote:
> Hi Giovanni,
> I don´t understand the other ticket you refer to.
>
> The problem is t...
Giovanni Manghi
06:31 PM Bug report #11713: Measure tool ellipsoid defaults to 'None/Planametric' regardless of previous e...
Hi Giovanni,
I don´t understand the other ticket you refer to.
The problem is that all area calculation is incorrect...
Lene Fischer
11:58 PM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Bogdan Hlevca wrote:
> Attached is a small project the show the problem.
>
> The only grid frame that works is the ...
Giovanni Manghi
05:53 PM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Attached is a small project the show the problem.
The only grid frame that works is the rectangle, Zebra and the ot...
Bogdan Hlevca
12:07 PM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
I'll try to do it by tomorrow Bogdan Hlevca
11:28 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
Can you please attach a project file which demonstrates this issue? Nyall Dawson
09:55 AM Bug report #11924: Composer compatibility issues between 2.4 and 2.6
I updated the bug but it created another one, sorry Can you please remove the duplicate?
it is 2.6.1
Bogdan Hlevca
09:45 AM Bug report #11924 (Feedback): Composer compatibility issues between 2.4 and 2.6
Does it happens with qgis 2.6.1 or master? Giovanni Manghi
09:45 AM Bug report #11924 (Feedback): Composer compatibility issues between 2.4 and 2.6
Does it happens with qgis 2.6.1 or master? Giovanni Manghi
09:43 AM Bug report #11924 (Closed): Composer compatibility issues between 2.4 and 2.6
I have a project created in 2.4 and when I open the Composer the frame is not displayed. Moreover, the coordinates ar... Bogdan Hlevca
07:09 PM Bug report #11928 (Closed): LAStools miss "import subprocess, os" in LAStoolsUtils.py
Fixed in changeset commit:"9d76247ac3923bada471ea9d24a5be95aecedec3". Nathan Woodrow
06:36 PM Bug report #11928 (Closed): LAStools miss "import subprocess, os" in LAStoolsUtils.py
> I have LAStools running in 2.4 – but in 2.6.1 it gives at an error:
> global name 'os' is not defined See log for ...
Lene Fischer
09:58 AM Bug report #11927 (Closed): Composer compatibility issues between 2.4 and 2.6
Bogdan Hlevca
09:57 AM Bug report #11927: Composer compatibility issues between 2.4 and 2.6
Sorry for the duplicate. Closing Bogdan Hlevca
09:57 AM Bug report #11927: Composer compatibility issues between 2.4 and 2.6
Sorry for the duplicate. Closing Bogdan Hlevca
09:53 AM Bug report #11927 (Closed): Composer compatibility issues between 2.4 and 2.6
I have a project created in 2.4 and when I open the Composer the frame is not displayed. Moreover, the coordinates ar... Bogdan Hlevca
09:57 AM Bug report #11925 (Closed): Change the configuration directory location to the new standard
Sorry I made a duplicate. I am closing this one. Bogdan Hlevca
09:52 AM Bug report #11925 (Closed): Change the configuration directory location to the new standard
Currently QGIS stores its configuration and history settings in $HOME/.qgis2 directory.
This is an obsolete standard...
Bogdan Hlevca
09:52 AM Bug report #11926 (Closed): Change the configuration directory location to the new standard
Currently QGIS stores its configuration and history settings in $HOME/.qgis2 directory.
This is an obsolete standard...
Bogdan Hlevca
09:49 AM Feature request #11923: output in 3D pdf
BRUNO BELLAZZI wrote:
> Sorry im new in this ...the title should be OUTPUT IN 3D PDF from map composer.
> Thanks
wh...
Giovanni Manghi
09:29 AM Feature request #11923: output in 3D pdf
Sorry im new in this ...the title should be OUTPUT IN 3D PDF from map composer.
Thanks
BRUNO BELLAZZI
09:09 AM Feature request #11923 (Feedback): output in 3D pdf
is this a different feature request than #11922 ?
if yes, why the title is the same? Please leave feedback.
Giovanni Manghi
09:09 AM Feature request #11923 (Feedback): output in 3D pdf
is this a different feature request than #11922 ?
if yes, why the title is the same? Please leave feedback.
Giovanni Manghi
09:09 AM Feature request #11923 (Feedback): output in 3D pdf
is this a different feature request than #11922 ?
if yes, why the title is the same? Please leave feedback.
Giovanni Manghi
08:53 AM Feature request #11923 (Feedback): output in 3D pdf
I follow to previous issue posted to ask if possible to have in future releases an output of elevation data in out 3D... BRUNO BELLAZZI
09:46 AM Bug report #10966 (Open): with OTFR on $area is always computed in square meters even if the CRS ...
it turns to be a regression as it worked as expected at least until 2.0.1 Giovanni Manghi
09:46 AM Bug report #10966 (Open): with OTFR on $area is always computed in square meters even if the CRS ...
it turns to be a regression as it worked as expected at least until 2.0.1 Giovanni Manghi
09:46 AM Bug report #10966 (Open): with OTFR on $area is always computed in square meters even if the CRS ...
it turns to be a regression as it worked as expected at least until 2.0.1 Giovanni Manghi
09:40 AM Bug report #10931: no zebra frame in print composer
OK, I'll open a new bug report Bogdan Hlevca
09:19 AM Bug report #10931 (Closed): no zebra frame in print composer
Bogdan Hlevca wrote:
> Sorry to reopen it but it does not work in 2.6.1.
>
> I have a project created in 2.4 and whe...
Giovanni Manghi
09:19 AM Bug report #10931 (Closed): no zebra frame in print composer
Bogdan Hlevca wrote:
> Sorry to reopen it but it does not work in 2.6.1.
>
> I have a project created in 2.4 and whe...
Giovanni Manghi
08:59 AM Bug report #10931 (Reopened): no zebra frame in print composer
Sorry to reopen it but it does not work in 2.6.1.
I have a project created in 2.4 and when I open the Composer the f...
Bogdan Hlevca
09:14 AM Feature request #8771: Export print layouts in geospatial pdf format
see also #11922 Giovanni Manghi
09:13 AM Feature request #11922 (Closed): OUTPUT FROM MAP COMPOSER
duplicate of #8771 Giovanni Manghi
09:13 AM Feature request #11922 (Closed): OUTPUT FROM MAP COMPOSER
duplicate of #8771 Giovanni Manghi
08:42 AM Feature request #11922 (Closed): OUTPUT FROM MAP COMPOSER
It should be fine if (as requested by other users) the PDF output can be Georeferenced (GEOPDF) and with layered leve... BRUNO BELLAZZI
09:06 AM Bug report #11919 (Feedback): Calculation of areas in feet off by a factor of 10 in Illinois east...
it seems to me that this issue is duplicate of #10966, please leave feedback. Giovanni Manghi
09:06 AM Bug report #11919 (Feedback): Calculation of areas in feet off by a factor of 10 in Illinois east...
it seems to me that this issue is duplicate of #10966, please leave feedback. Giovanni Manghi
09:06 AM Bug report #11919 (Feedback): Calculation of areas in feet off by a factor of 10 in Illinois east...
it seems to me that this issue is duplicate of #10966, please leave feedback. Giovanni Manghi
09:06 AM Bug report #11919 (Feedback): Calculation of areas in feet off by a factor of 10 in Illinois east...
it seems to me that this issue is duplicate of #10966, please leave feedback. Giovanni Manghi
05:17 AM Bug report #11921 (Closed): Legend initially displayed wrong size
When opening Print Composer with a map that has the Legend with item units specified in Map Units, the Legend is inco... Harry Clarke
05:07 AM Bug report #11920 (Open): Scale inconsistently changes when adjusting map extent
Within Print Composer, SCALE changes when changing XMIN or YMIN for a map, which makes it difficult to accurately dra... Harry Clarke

2014-12-28

03:05 PM Bug report #11317: PostGIS views not handled correctly
This is a user interface bug. The problem is that we are not informed of the problem before we hit the *Add* button i... Aren Cambre

2014-12-26

05:17 PM Bug report #11919: Calculation of areas in feet off by a factor of 10 in Illinois east projection
Using area calculation measurement tool in toolbar gives correct area in meters. Doug Newcomb
05:15 PM Bug report #11919: Calculation of areas in feet off by a factor of 10 in Illinois east projection
WMS service for background imagery to see field digitized http://gis.apfo.usda.gov/arcgis/services/NAIP/Illinois_2014... Doug Newcomb
04:41 PM Bug report #11919 (Closed): Calculation of areas in feet off by a factor of 10 in Illinois east p...
When digitizing in EPSG:3435 ( Illinois East (ftUS)) and calculating areas from the $area value in the field calculat... Doug Newcomb

2014-12-25

06:59 AM Bug report #9444: WFS client not requesting new features when not-cached
The issue is not that server would send incomplete response. This discussion handles the case when the requested BBOX... Jukka Rahkonen

2014-12-24

08:05 AM Bug report #11832: Rotation value retain when new project created
Rotation value reset with commit:11f73e791c501fda975f23c2d3daa5d54f02eb84 Sandro Santilli
07:24 AM Bug report #11916 (Closed): No way to update
Paolo Cavallini
06:16 AM Bug report #11916: No way to update
please remove this ticket! Evgeniy Nikulin
06:10 AM Bug report #11916 (Closed): No way to update
Evgeniy Nikulin
06:15 AM Bug report #11917 (Closed): No way to update scales list from python interface
QgsApp no one method/ref_to_obj for update scales list in main window.
Control mScaleEdit - private.
Evgeniy Nikulin
01:39 AM Bug report #11915 (Closed): QgsScaleUtils need more pythonic wrapper
QgsScaleUtils has only c-style methods. Now noway to use loadScaleList and saveScaleList. Evgeniy Nikulin

2014-12-23

08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
08:04 PM Feature request #3797: Specify joint style for Simple Markers
In recent versions, QGIS has gotten real good at offering the user to modify the join style throughout symbology and ... Mathieu Pellerin - nIRV
11:09 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
Not a regression (tested down until qgis 2.0.1). Giovanni Manghi
11:09 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
Not a regression (tested down until qgis 2.0.1). Giovanni Manghi
11:09 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
Not a regression (tested down until qgis 2.0.1). Giovanni Manghi
11:09 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
Not a regression (tested down until qgis 2.0.1). Giovanni Manghi
11:09 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
Not a regression (tested down until qgis 2.0.1). Giovanni Manghi
09:13 AM Bug report #11914: "Rule-based renderer": refine current rules doesn't apply on the subset of fea...
I've found an use-case where it may be useful to keep categorization (and other refinings?) on all features instead o... Harrissou Santanna
08:22 AM Bug report #11914 (Closed): "Rule-based renderer": refine current rules doesn't apply on the subs...
Steps to reproduce:
- Layer Properties > Style < Rule-based
- Enter a valid expression. ok
- Enter a second rule (or ...
Harrissou Santanna
07:01 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
Victor Olaya wrote:
> Ok now I understand the problem. Doesn't look easy to fix.
>
> The problem is that, when you s...
Giovanni Manghi
03:35 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
The warning you propose seems reasonable to me. Something like this could be shown: "The CRS of the input layer does ... Filipe Dias
06:49 AM Bug report #11908 (Closed): Polygon shapefile not displaying at small scales
you have corrupted spatial indexes. Delete the sbn/qix files, and then eventually regenerate the index (in vector pro... Giovanni Manghi
06:49 AM Bug report #11908 (Closed): Polygon shapefile not displaying at small scales
you have corrupted spatial indexes. Delete the sbn/qix files, and then eventually regenerate the index (in vector pro... Giovanni Manghi
06:43 AM Bug report #11762 (Closed): Modeller: wrong input files and forgets paths
Giovanni Manghi
03:59 AM Feature request #11913 (Closed): Add "data defined override button to legend columns number
Hi,
Adding "Data defined override" option to map composer has opened a new world of map automation and offered great ...
Harrissou Santanna
03:28 AM Bug report #11910: in case of rotation zoom by rectangle shows artifacts
Sandro Santilli wrote:
> Please add "in case of rotation" in the title, as that's the condition for the artifacts to ...
Giovanni Manghi
02:30 AM Bug report #11910: in case of rotation zoom by rectangle shows artifacts
Please add "in case of rotation" in the title, as that's the condition for the artifacts to show up (it's important t... Sandro Santilli
02:04 AM Bug report #11910 (Closed): in case of rotation zoom by rectangle shows artifacts
The zooming rectangle is broken. See attached image. zicke -
02:34 AM Feature request #11912 (Closed): rotation: the composer map item should rely on the new map rotat...
Right now, the newly coded rotation feature is only useable on qgis' main canvas, meaning composer sheets can't make ... Mathieu Pellerin - nIRV
02:31 AM Bug report #11911: rotation: inverted polygon renderer broken with non-zero rotation value
How do you enable the inverted polygon renderer ? Sandro Santilli
02:18 AM Bug report #11911 (Closed): rotation: inverted polygon renderer broken with non-zero rotation value
Inverted polygon renderer is broken when a non-zero rotation value is used. See the attached screenshots which should... Mathieu Pellerin - nIRV
02:29 AM Bug report #11909: Pre-rendered map display does not respect rotation
IMO, this shouldn't be a feature request. It's an implementation issue. But that's all semantic :) it however would h... Mathieu Pellerin - nIRV
01:49 AM Bug report #11909 (Closed): Pre-rendered map display does not respect rotation
The map shown on zoom/pan events as a placeholder while renderer completes his work in a thread does not take rotatio... Sandro Santilli
01:42 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
Thanks for review, patch pushed as commit:32079ed3cf7cf851515c63ed01cb994169f45963 -- not sure if this is worth backp... Sandro Santilli
01:42 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
Thanks for review, patch pushed as commit:32079ed3cf7cf851515c63ed01cb994169f45963 -- not sure if this is worth backp... Sandro Santilli
01:35 AM Bug report #11900: Plugin layers do not work correctly with rotation
It might be easier to split this into one ticket for each non-working plugin as I'm afraid it needs special handling ... Sandro Santilli

2014-12-22

11:24 PM Bug report #11762 (Feedback): Modeller: wrong input files and forgets paths
should be fixed now. Can you check? Victor Olaya
11:15 PM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
Ok now I understand the problem. Doesn't look easy to fix.
The problem is that, when you set the CRS like that, and ...
Victor Olaya
06:52 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
*it is* a general issue, eventually only for some backends like GRASS (where it surely happens, probably also R), but... Giovanni Manghi
12:12 PM Bug report #11908 (Closed): Polygon shapefile not displaying at small scales
When zooming into a shape file polygon, certain polygons disappear as you zoom in. The polygons that disappear also ... Matt Dallaire
12:04 PM Bug report #11891: crash dump on exit - win32
Another plugin, Raster Bender, has the same issue. Has been reported to plugin tracker Mikhail Tchernychev
10:08 AM Bug report #11738: Select by location does not work anymore if the intersection layer is a point ...
Just tried it with the new update (2.6.1-2) and it still seems to be an issue. It's not always returning a blank laye... Jon Duckworth
08:37 AM Bug report #11904: "Save As" on json layer leads to segfault
Johannes Kroeger wrote:
> Yes, I meant a fresh checkout from git, sorry for not being clear. I used https://aur.archl...
Giovanni Manghi
07:52 AM Bug report #11904: "Save As" on json layer leads to segfault
Yes, I meant a fresh checkout from git, sorry for not being clear. I used https://aur.archlinux.org/packages/qgis/ an... Johannes Kroeger
05:20 AM Bug report #11904 (Feedback): "Save As" on json layer leads to segfault
I assume you are using QGIS master, as you say "I tried with the latest GIT version at the time of writing", anyway I... Giovanni Manghi
05:20 AM Bug report #11904 (Feedback): "Save As" on json layer leads to segfault
I assume you are using QGIS master, as you say "I tried with the latest GIT version at the time of writing", anyway I... Giovanni Manghi
05:20 AM Bug report #11904 (Feedback): "Save As" on json layer leads to segfault
I assume you are using QGIS master, as you say "I tried with the latest GIT version at the time of writing", anyway I... Giovanni Manghi
05:20 AM Bug report #11904 (Feedback): "Save As" on json layer leads to segfault
I assume you are using QGIS master, as you say "I tried with the latest GIT version at the time of writing", anyway I... Giovanni Manghi
04:15 AM Bug report #11904 (Closed): "Save As" on json layer leads to segfault
QGIS segfaults when I try to rightclick > "Save As" a JSON layer (geo- or topojson).
To reproduce:
1. Copy the exam...
Johannes Kroeger
08:35 AM Bug report #10908: SVG Markers are White
see also #11907 Giovanni Manghi
08:35 AM Bug report #10908: SVG Markers are White
see also #11907 Giovanni Manghi
08:35 AM Bug report #10908: SVG Markers are White
see also #11907 Giovanni Manghi
08:35 AM Bug report #10908: SVG Markers are White
see also #11907 Giovanni Manghi
08:35 AM Bug report #11907 (Closed): SVG marker bug
duplicate of #10908 Giovanni Manghi
08:35 AM Bug report #11907 (Closed): SVG marker bug
duplicate of #10908 Giovanni Manghi
08:12 AM Bug report #11907 (Closed): SVG marker bug
Take a look at the attachment picture. Henning Rekvik
08:18 AM Bug report #11906: QGIS crash on edit grass vector layer
the GRASS plugin is unmantained and I'm not sure what will be the policy about the issues of this component. Giovanni Manghi
07:41 AM Bug report #11906 (Closed): QGIS crash on edit grass vector layer
Hi QGIS crash when I edit a grass vector layer using the specific tool on the grass toolbox.
If I delete a boundary a...
pierluigi de rosa
08:12 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
The patch looks good from a quick look. The other beginInsertRows() call handles addition of layer tree nodes, not le... Martin Dobias
08:00 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
The following patch fixes the crash indeed, but I see beginInsertRows being also called from other places... Sandro Santilli
07:51 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
Legend node embedded in parent means that the legend node will be not displayed in the view as a separate item under ... Martin Dobias
07:39 AM Bug report #11905: QgsLayerTreeModel: presence of embedded legend breaks ModelTest
Whaht does it mean exactly for a legend node to be embedded in parent's node ? It's not documented here:
https://gith...
Sandro Santilli
07:14 AM Bug report #11905 (Closed): QgsLayerTreeModel: presence of embedded legend breaks ModelTest
A single project with an embedded legend fails an assertion in ModelTester.
Ho to reproduce:
1. Build with -DENABLE...
Sandro Santilli
06:55 AM Bug report #11713 (Feedback): Measure tool ellipsoid defaults to 'None/Planametric' regardless of...
this ticket should be duplicate of #10392 that is alreasy a blocker. Please leave feedback. Giovanni Manghi
06:55 AM Bug report #11713 (Feedback): Measure tool ellipsoid defaults to 'None/Planametric' regardless of...
this ticket should be duplicate of #10392 that is alreasy a blocker. Please leave feedback. Giovanni Manghi
06:55 AM Bug report #11713 (Feedback): Measure tool ellipsoid defaults to 'None/Planametric' regardless of...
this ticket should be duplicate of #10392 that is alreasy a blocker. Please leave feedback. Giovanni Manghi
06:55 AM Bug report #11713 (Feedback): Measure tool ellipsoid defaults to 'None/Planametric' regardless of...
this ticket should be duplicate of #10392 that is alreasy a blocker. Please leave feedback. Giovanni Manghi
06:55 AM Bug report #11713 (Feedback): Measure tool ellipsoid defaults to 'None/Planametric' regardless of...
this ticket should be duplicate of #10392 that is alreasy a blocker. Please leave feedback. Giovanni Manghi
06:38 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Benjamin Warr wrote:
> Hi Giovanni, my apologies for a newbie question, but I am not sure how to "support the fix".
>...
Giovanni Manghi
06:01 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Hi Giovanni, my apologies for a newbie question, but I am not sure how to "support the fix".
Ben
Benjamin Warr
05:22 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
Benjamin Warr wrote:
> I repeat the plea made by Dewey. The standard or 'default' encoding for csv imports appears to...
Giovanni Manghi
01:14 AM Bug report #8421: "import delimited text layer" does not work with files created on excel/osx
I repeat the plea made by Dewey. The standard or 'default' encoding for csv imports appears to be UTF-8, please can s... Benjamin Warr
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
06:36 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Peter Drexel wrote:
> Hi Giovanni,
> it hapens with New Shapefiles with UTF-8-Encoding.
> Create New Shapefile with U...
Giovanni Manghi
05:33 AM Feature request #11888: Warn the user when OGR "stretched" the column width to accommodate values
Hi Giovanni,
it hapens with New Shapefiles with UTF-8-Encoding.
Create New Shapefile with UTF-8 Encoding, add a textf...
Peter Drexel
05:26 AM Bug report #11902 (Closed): Sorting layers in legend using python in QGIS 2.6
Please post questions in the users/developers mailing list, then if eventually an issue is confirmed file a ticket he... Giovanni Manghi
05:26 AM Bug report #11902 (Closed): Sorting layers in legend using python in QGIS 2.6
Please post questions in the users/developers mailing list, then if eventually an issue is confirmed file a ticket he... Giovanni Manghi
02:55 AM Bug report #9801: Map rotation in print composer: make behaviour more uniform
Does core map rotation in 2.7+ make this report outdated ? Sandro Santilli
02:51 AM Bug report #11811 (Closed): rotation regression: zoom to mouse cursor using mouse wheel is broken
PR merged by @wonder-sk with commit:1d9eb8f66d3616b91d1fdb9927fa35f898028daa Sandro Santilli

2014-12-21

12:51 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
It seems the problem is different than the one I reported, sorry. The custom CRS of this shapefile is ETRS89 without ... Filipe Dias
11:44 PM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
IF I open that layer, i do not see it as having the EPSG 3763 CRS. Instead, it has user defined one
If I set the CRS...
Victor Olaya
12:43 AM Bug report #11903 (Closed): Configure Shortcuts problem on Mac
I'm running QGIS 2.6.0-Brighton under Mac OS X 10.9.5 on a
Mac Mini (late 2009) 2.26 GHz Intel Core 2 Duo with 4 GB ...
Garth Fletcher
12:33 AM Bug report #8923: SpatiaLite 4: added attributes disappear
In loadFieldsAbstractInterface there is a PRAGMA table_info() call and a gaiaVectorLayerPtr is checked.
I think the s...
Matthias Kuhn
11:40 PM Bug report #11902 (Closed): Sorting layers in legend using python in QGIS 2.6
In QGIS 2.2 , I was able to sort in alphabetical order the layers simply using this:
self.maplegendtree = iface.main...
Mohanakarthick Balan
11:24 PM Bug report #11713: Measure tool ellipsoid defaults to 'None/Planametric' regardless of previous e...
I have just found the same error.
Starting to show my students the difference between calculating an area with planim...
Lene Fischer
02:02 PM Bug report #11899: Coordinates issue in print composer
Hello,
I am sending screenshots ... they are self-explanatory. Pls let me know if additional info is needed.
mira
Jaromir Mikes
02:02 PM Bug report #11899: Coordinates issue in print composer
Hello,
I am sending screenshots ... they are self-explanatory. Pls let me know if additional info is needed.
mira
Jaromir Mikes
12:20 PM Bug report #11899 (Feedback): Coordinates issue in print composer
We need more info. Can you please provide more detail? Screenshots of what you see versus what you expect would be us... Nyall Dawson
05:52 AM Bug report #11899 (Closed): Coordinates issue in print composer
While I had set CRS to WGS 84 for my project I could have coordinates displayed as expected in print composer.
Then I...
Jaromir Mikes
10:49 AM Bug report #11891: crash dump on exit - win32
Done. Mikhail Tchernychev
05:59 AM Bug report #11900 (Closed): Plugin layers do not work correctly with rotation
Plugin layers are not drawn correctly when rotation is non-zero. (Tried with Crayfish, probably OpenLayers will have ... Martin Dobias

2014-12-20

10:47 PM Bug report #11891 (Rejected): crash dump on exit - win32
Please file a ticket on plugin bug tracker. Paolo Cavallini
10:47 PM Bug report #11891 (Rejected): crash dump on exit - win32
Please file a ticket on plugin bug tracker. Paolo Cavallini
10:41 PM Bug report #11891: crash dump on exit - win32
I think I figured it out. The plugin which causes the crash is GarminCustomMap (this is unfortunate)
I started adding...
Mikhail Tchernychev
10:16 PM Bug report #11891: crash dump on exit - win32
Yes, right. Re-naming .qgis2 fixes it. All plugins also gone - but it is clear.
So it is plugin. I'll try to figure o...
Mikhail Tchernychev
08:15 AM Bug report #11891: crash dump on exit - win32
I am using OsGeo4W. It happens almost all time (was couple of times when it closed normally).
I will re-name .qgis2 l...
Mikhail Tchernychev
08:12 AM Bug report #11891: crash dump on exit - win32
Yes crash appeared after update. It's a few days already.
I think gdal 1.1.1.-5 is responsible. My other laptop where...
Mikhail Tchernychev
01:55 AM Bug report #11891 (Feedback): crash dump on exit - win32
Does the crash appeared after an update? what installer are you using, standalone or osgeo4w? it happens all the time... Giovanni Manghi
01:55 AM Bug report #11891 (Feedback): crash dump on exit - win32
Does the crash appeared after an update? what installer are you using, standalone or osgeo4w? it happens all the time... Giovanni Manghi
01:55 AM Bug report #11891 (Feedback): crash dump on exit - win32
Does the crash appeared after an update? what installer are you using, standalone or osgeo4w? it happens all the time... Giovanni Manghi
03:22 AM Bug report #9489: Copy/Paste issue with explicit primary keys
rmercer - wrote:
> Gavin, thank you for putting in that tip. It was very frustrating to be having this same issue wi...
Giovanni Manghi
02:37 AM Feature request #11888: Warn the user when OGR "stretched" the column width to accommodate values
Peter Drexel wrote:
> Hi Giovanni,
> I just tried Version 2.6.1 (Windows 7 64 bit), issues are the same.
> Specialy t...
Giovanni Manghi
02:35 AM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
it does not uses always "EPSG:4326 - WGS 84" by default, it is supposed to use what is configured in
settings -> opt...
Giovanni Manghi
02:35 AM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
it does not uses always "EPSG:4326 - WGS 84" by default, it is supposed to use what is configured in
settings -> opt...
Giovanni Manghi
02:35 AM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
it does not uses always "EPSG:4326 - WGS 84" by default, it is supposed to use what is configured in
settings -> opt...
Giovanni Manghi
02:35 AM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
it does not uses always "EPSG:4326 - WGS 84" by default, it is supposed to use what is configured in
settings -> opt...
Giovanni Manghi
02:35 AM Bug report #11889: Setting "use project CRS" in "settings -> options -> CRS > CRS for new layers"...
it does not uses always "EPSG:4326 - WGS 84" by default, it is supposed to use what is configured in
settings -> opt...
Giovanni Manghi
01:58 AM Feature request #3717 (Closed): allow loading vector legend from text file
data defined symbology exists since long ago now. Giovanni Manghi
01:58 AM Feature request #3717 (Closed): allow loading vector legend from text file
data defined symbology exists since long ago now. Giovanni Manghi
01:51 AM Feature request #11797: Save group of layers as layer definition (.qlr) file
If you need this functionality please consider supporting its development. Giovanni Manghi

2014-12-19

10:17 AM Feature request #11797: Save group of layers as layer definition (.qlr) file
Hi,
"Layer menu > Embed Layers and Groups" already offers the possibility to add at once many layers that are used in...
Harrissou Santanna
07:34 AM Feature request #11797: Save group of layers as layer definition (.qlr) file
Such as Joe I consider this tool very useful and necessary. Sandra Lopes
09:01 AM Bug report #11891: crash dump on exit - win32
Apparently GDAL111 is responsible. I opened dump with VC++ Studio and below is what I see.
I don't have gdal code, bu...
Mikhail Tchernychev
08:22 AM Feature request #10737: Easier loading of qlr files
The new layer definition files added recently ist's really great.
But it’s only possible to add .qrl file to a QGIS p...
Sandra Lopes
08:05 AM Feature request #11890: Close without Saving lacks a keyboard shortcut
I get 3 options, but only 2 of them have one letter of the button text underlined. A letter that, when pressed, execu... Sandro Santilli
05:42 AM Bug report #9444: WFS client not requesting new features when not-cached
Hi,
Just dropping in on this discussion, my apologies if this remark has already been made elsewhere.
> QGIS cannot...
Maarten Vermeyen
04:21 AM Feature request #3717: allow loading vector legend from text file
duplicate of #859 mlennert -

2014-12-18

12:00 AM Bug report #11897 (Open): In Print composer, menu Setting should open only Composer options
Currently the menu is a shortcut to the whole Options, which is confusing for the user, as also tabs for non relevant... Paolo Cavallini
11:58 PM Bug report #11896 (Open): Messy label backgrounds
When using curved labels with a background, a separate background (e.g. a rectangle, svg) is drawn for each character... Paolo Cavallini
11:54 PM Bug report #10392 (Reopened): Ellipsoid for measurement keeps getting reset
Still true. It seems to happen only if you open project properties from menu. When project properties open using CRS ... Paolo Cavallini
11:54 PM Bug report #10392 (Reopened): Ellipsoid for measurement keeps getting reset
Still true. It seems to happen only if you open project properties from menu. When project properties open using CRS ... Paolo Cavallini
08:01 PM Bug report #9489: Copy/Paste issue with explicit primary keys
Gavin, thank you for putting in that tip. It was very frustrating to be having this same issue with no clue how to g... rmercer -
02:43 PM Bug report #11893 (Closed): QgsVectorJoinInfo in Windows doesn't work but works fine in Linux for...
A programmatic join in 2.6.x using the following:
joinIdx = joinLyr.fieldNameIndex('siteid')
targetIdx = pamLyr.fiel...
Jeff Cavner
10:51 AM Feature request #11890: Close without Saving lacks a keyboard shortcut
Do you mean that you are missing the third "close without saving" option when pressing alt-F4?
In general, of course...
Anita Graser
09:28 AM Feature request #11890 (Open): Close without Saving lacks a keyboard shortcut
I cannot close qgis from the keyboard. alt-F4 prompts me but I can only pick "Cancel" or "Save", while "Close without... Sandro Santilli
09:51 AM Bug report #11891: crash dump on exit - win32
I disabled them all by hand and but crash is still here. Mikhail Tchernychev
09:46 AM Bug report #11891: crash dump on exit - win32
No. In fact I was looking for way to do it without manually removing them all.
Is there a switch somewhere?
Thank yo...
Mikhail Tchernychev
09:33 AM Bug report #11891: crash dump on exit - win32
Have you tried removing all the user plugins? Paolo Cavallini
09:32 AM Bug report #11891 (Closed): crash dump on exit - win32
Hi,
QGIS developed recently crash on exit under Win32 (win 7)
steps to re-produce
1. start QGIS master or QGIS 2.61
...
Mikhail Tchernychev
09:39 AM Feature request #11892 (Open): Save to last used directory, not home, when entering filename dire...
If you enter a filename directly in the "Save as" field of the layer Save As dialog, QGIS will save the file to the h... Johannes Kroeger
09:14 AM Bug report #11889 (Closed): Setting "use project CRS" in "settings -> options -> CRS > CRS for ne...
If you have a project open and create a new layer, QGIS will always use "EPSG:4326 - WGS 84" by default.
Please chan...
Johannes Kroeger
08:52 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
I've taken the QgsWmsRasterProvider internal caching road for now.
It will emit a QgsCachedImageFetcher object when a...
Sandro Santilli
07:33 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
I've the async downloader used by WMSLegendNode and it works very nicely.
This required exposing a new virtual metho...
Sandro Santilli
07:35 AM Feature request #11888: Warn the user when OGR "stretched" the column width to accommodate values
Hi Giovanni,
I just tried Version 2.6.1 (Windows 7 64 bit), issues are the same.
Specialy the second one is really ba...
Peter Drexel
07:22 AM Feature request #11888 (Feedback): Warn the user when OGR "stretched" the column width to accommo...
about the first issue:
I filed a ticket while a ogr with the same description, and it turns out that is a new ogr fe...
Giovanni Manghi
06:54 AM Feature request #11888 (Open): Warn the user when OGR "stretched" the column width to accommodate...
Hi all,
i stumble over 2 Issues editing Attributes:
First:
Step 1: I create a new Shapefile, then add 2 attribute co...
Peter Drexel
06:38 AM Bug report #11887 (Closed): minimumValue() in 2.6.x for Windows different than Linux for NULL
minimumValue() against the data provider or a vector layer object in Windows if a NULL value is present in the attrib... Jeff Cavner
06:17 AM Bug report #11886 (Closed): DBManager always shows password to PostGIS connection in clear text i...
Hi,
Click on "Add PostGIS table" button
Then create a new connection without saving username nor password. OK.
Connec...
Harrissou Santanna
06:13 AM Bug report #11880 (Closed): Toggling editing and saving edits becomes slow and freezes after time
Giovanni Manghi
05:18 AM Bug report #11880: Toggling editing and saving edits becomes slow and freezes after time
Removing digitising-related plugins seems to have fixed the problem. Thanks for pointing me in the right direction. Charles Krolik-Root
04:18 AM Bug report #11880: Toggling editing and saving edits becomes slow and freezes after time
Have you tried to run it with --noplugins?
This has previously been tracked back to plugins.
See #9229
Matthias Kuhn
05:08 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
Filipe Dias wrote:
> There was a similar ticket specific to GRASS and R but it was closed
>
> #10137
it was a regre...
Giovanni Manghi
05:08 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
Filipe Dias wrote:
> There was a similar ticket specific to GRASS and R but it was closed
>
> #10137
it was a regre...
Giovanni Manghi
05:08 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
Filipe Dias wrote:
> There was a similar ticket specific to GRASS and R but it was closed
>
> #10137
it was a regre...
Giovanni Manghi
03:42 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
There was a similar ticket #10137 specific to GRASS and R but it was closed. Filipe Dias
03:38 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
It is not a specific issue of one tool, is a general issue in processing (it strips always the towgs parameter in out... Giovanni Manghi
03:38 AM Bug report #11884: Processing generates outputs with no "+towgs84" parameters
It is not a specific issue of one tool, is a general issue in processing (it strips always the towgs parameter in out... Giovanni Manghi
03:17 AM Bug report #11884 (Closed): Processing generates outputs with no "+towgs84" parameters
Run "split vector layer" with the attached shapefile which is in ETRS89 PT TM06 (EPSG 3763). The resulting output has... Filipe Dias
04:20 AM Bug report #11885 (Closed): Add WMS layer throw python console -> QGIS Crash
I try to add wms layer to the map:
...
Evgeniy Nikulin
03:02 AM Bug report #11883 (Closed): text annotation with fixed map position moves
Fixed in changeset commit:"f81d48368765a54ac2a5191326210b993f43fdfa". Jürgen Fischer
02:32 AM Bug report #11883 (Closed): text annotation with fixed map position moves
When adding a text annotation and using the setting "fixed map position", QGIS rounds or truncates the map position w... Jochen Huber
02:28 AM Bug report #11882 (Closed): QGIS Server returns 500 if only embedded layers are present
QGIS Server returns 500 if only embedded layers are present.
To reproduce:
1. Create a new project
2. Embed group f...
luca76 -
02:17 AM Bug report #8923: SpatiaLite 4: added attributes disappear
Hi,
Thanks for the workaround.
There is still a problem when loading a corrupted sqlite file right ? (I stumbled upo...
Hugo Mercier

2014-12-17

11:48 PM Bug report #11878 (Closed): Processing: selecting the "GRASS region extent" does not work anymore...
Fixed in changeset commit:"c800a8cd74272458b9a2965078b6dcb4b229b0c7". Alexander Bruy
05:35 AM Bug report #11878 (Closed): Processing: selecting the "GRASS region extent" does not work anymore...
It used to work until QGIS 2.4, now in 2.6.* and master the user cannot use anymore the option "select extent on canv... Giovanni Manghi
11:22 PM Bug report #11877 (Closed): Processing/master: default parameters are not retained in batch mode
Should be fixed now Alexander Bruy
11:22 PM Bug report #11877 (Closed): Processing/master: default parameters are not retained in batch mode
Should be fixed now Alexander Bruy
11:19 PM Bug report #11877: Processing/master: default parameters are not retained in batch mode
Probably related to #11876 Alexander Bruy
05:10 AM Bug report #11877 (Closed): Processing/master: default parameters are not retained in batch mode
In QGIS master when running modules in batch mode, there are default parameters that are not automatically filled (as... Giovanni Manghi
11:21 PM Bug report #11439 (Feedback): r.covar GRASS command (and possibly others) in Processing does not ...
Should be fixed in master Alexander Bruy
11:19 PM Bug report #11879 (Closed): Processing: batch mode columns width in QGIS master seems not optimal
Fixed in changeset commit:"e42e1053e88b14d3f6847ce6e878ef95fcf13e2a". Alexander Bruy
05:40 AM Bug report #11879 (Closed): Processing: batch mode columns width in QGIS master seems not optimal
The default columns width in the GUI of batch mode in QGIS master seems sub-optimal if compared to what used to be un... Giovanni Manghi
11:19 PM Bug report #11876 (Closed): Processing: python error in batch mode GUI (QGIS master)
Fixed in changeset commit:"e31027c8401ce6bb48f65736b260da1d51c7d270". Alexander Bruy
05:07 AM Bug report #11876 (Closed): Processing: python error in batch mode GUI (QGIS master)
When double clicking the column names in the batch mode GUI, in QGIS master now a python error shows
Traceback (mos...
Giovanni Manghi
11:18 PM Bug report #11875 (Closed): Processing: saving to memory layer returns an error
Fixed in changeset commit:"69fe922a5403d84e28857959903e473afa7f19e5". Alexander Bruy
04:41 AM Bug report #11875 (Closed): Processing: saving to memory layer returns an error
VectorWriter instance has no attribute 'GEOM_TYPE_MAP' See log for more details
it used to work in previous (QGIS <...
Giovanni Manghi
11:08 PM Bug report #11872 (Closed): Edit button toggles after copy/paste and deselect on PostGIS layers
Fixed in changeset commit:"d288a53c0de20191f25656e860c8cfbb5174d194". Denis Rouzaud
10:24 PM Feature request #9960 (Closed): Add or document SCR input type for scripts
Already available and documented Alexander Bruy
10:24 PM Feature request #9960 (Closed): Add or document SCR input type for scripts
Already available and documented Alexander Bruy
09:25 AM Bug report #11880: Toggling editing and saving edits becomes slow and freezes after time
I've only been using Shapefiles so I have only experienced this problem with them. Can't speak for other datasources. Charles Krolik-Root
09:12 AM Bug report #11880 (Feedback): Toggling editing and saving edits becomes slow and freezes after time
Does this happen with any layer? of any type of datasource (shapes, postgis, etc.)? Giovanni Manghi
09:12 AM Bug report #11880 (Feedback): Toggling editing and saving edits becomes slow and freezes after time
Does this happen with any layer? of any type of datasource (shapes, postgis, etc.)? Giovanni Manghi
09:12 AM Bug report #11880 (Feedback): Toggling editing and saving edits becomes slow and freezes after time
Does this happen with any layer? of any type of datasource (shapes, postgis, etc.)? Giovanni Manghi
09:12 AM Bug report #11880 (Feedback): Toggling editing and saving edits becomes slow and freezes after time
Does this happen with any layer? of any type of datasource (shapes, postgis, etc.)? Giovanni Manghi
08:36 AM Bug report #11880: Toggling editing and saving edits becomes slow and freezes after time
Causes crash or corruption should be set to 'Yes'
Apologies, unsure how to change this.
Charles Krolik-Root
07:37 AM Bug report #11880 (Closed): Toggling editing and saving edits becomes slow and freezes after time
After toggling editing on and off a number of times the button stays held down and toggling takes longer and longer w... Charles Krolik-Root
09:07 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
Finally I've started refactoring legend downloading to allow for async loading. For now it's only used internally by ... Sandro Santilli
06:51 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
The experiments to lazily load the legend from Model::data() ended up being full of peril in that the implementation ... Sandro Santilli
08:12 AM Bug report #11881 (Closed): Processing: python error when loading a model that uses SAGA modules ...
If I create a model (that includes at least 1 SAGA tool) in a QGIS installation that uses SAGA 2.0.8 and then this mo... Giovanni Manghi
07:26 AM Bug report #11869 (Closed): MapInfo layer error when loaded from zipfile
Paolo Cavallini
03:50 AM Bug report #11869: MapInfo layer error when loaded from zipfile
I guess this should be closed as fixed upstream
http://lists.osgeo.org/pipermail/qgis-developer/2014-December/036070...
Giovanni Manghi
01:25 AM Bug report #11869: MapInfo layer error when loaded from zipfile

> Maybe better make them gray and not draggable.
this would not solve entirely the issue as the zip layer can be dr...
Giovanni Manghi
04:41 AM Feature request #6804: Add statistics to the dissolve tool
That would be great ! I'll wait for it. julie -
03:48 AM Feature request #6804: Add statistics to the dissolve tool
Hi Julie,
I'm aware of your plugin, thanks for it, is indeed very useful. I would like to suggest to evaluate the po...
Giovanni Manghi
03:27 AM Feature request #6804: Add statistics to the dissolve tool
I don't know if it's relevant but I made a plugin which does just this, it's called "dissolve with stats". It's still... julie -
04:28 AM Bug report #11874: NTv2 transformation not used in Print Composer
Added example files (two shapes in different CRS, project file with map layout) Jochen Huber
03:29 AM Bug report #11874 (Closed): NTv2 transformation not used in Print Composer
In a QGIS project with project coordinate system EPSG:4647 (UTM) and some layers in EPSG:4647, some in EPSG:31466 (ol... Jochen Huber
01:22 AM Feature request #1075: Enhance Classify feature in vector's Gradient Symbol and Continuous Color ...
Nathan Woodrow wrote:
> I'm not sure what is being asked here.
I guess the request is to allow define manually, in t...
Giovanni Manghi
01:22 AM Feature request #1075: Enhance Classify feature in vector's Gradient Symbol and Continuous Color ...
Nathan Woodrow wrote:
> I'm not sure what is being asked here.
I guess the request is to allow define manually, in t...
Giovanni Manghi

2014-12-16

12:07 AM Bug report #11869: MapInfo layer error when loaded from zipfile
In fact it is not supported by OGR, see:
http://trac.osgeo.org/gdal/wiki/UserDocs/ReadInZip
http://lists.osgeo.org/pi...
Paolo Cavallini
01:17 AM Bug report #11869 (Feedback): MapInfo layer error when loaded from zipfile
is a QGIS problem or a OGR one?
here the following test fails with ogr
giovanni@sibirica:~/Desktop > ogrinfo -ro -a...
Giovanni Manghi
06:26 PM Feature request #1075: Enhance Classify feature in vector's Gradient Symbol and Continuous Color ...
I'm not sure what is being asked here. Nathan Woodrow
06:26 PM Feature request #1075: Enhance Classify feature in vector's Gradient Symbol and Continuous Color ...
I'm not sure what is being asked here. Nathan Woodrow
06:00 PM Feature request #1075: Enhance Classify feature in vector's Gradient Symbol and Continuous Color ...
Based on the comment about new symbology - I dont think that this option exists in the vector styling unless someone ... John Floyd -
08:56 AM Feature request #11873: Add option (-segmentize) to "save as..." to allow densification of geomet...
Giovanni Manghi wrote:
> see also
>
> http://lists.osgeo.org/pipermail/grass-dev/2014-December/072422.html
Giovanni Manghi
08:56 AM Feature request #11873: Add option (-segmentize) to "save as..." to allow densification of geomet...
see also
http://lists.osgeo.org/pipermail/grass-dev/2014-December/072422.html
Giovanni Manghi
07:49 AM Feature request #11873 (Closed): Add option (-segmentize) to "save as..." to allow densification ...
ogr2ogr has an option
-segmentize
that allow densification of geometries.
This can be useful/important in many dif...
Giovanni Manghi
07:43 AM Bug report #11872 (Closed): Edit button toggles after copy/paste and deselect on PostGIS layers
Steps to reproduce:
Open two PostGIS linestring layers in a map document
Select a line feature from one layer
Click t...
Spencer Gardner
05:59 AM Bug report #11871 (Closed): QGIS master crashes while trying load any zipped vector layer
Subject says it all.
Does not happen on QGIS 2.6.1
Giovanni Manghi
03:35 AM Bug report #11834: qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>::clear()
Alexander Novoselov wrote:
> Giovanni Manghi wrote:
>
> >
> > *) can you remove layers, simplify the project and le...
Giovanni Manghi

2014-12-15

11:53 PM Bug report #11869 (Closed): MapInfo layer error when loaded from zipfile
Loading a shp form a zipfile works smoothly. On the contrary, a MapInfo file (.tab) throws an error (Layer not valid). Paolo Cavallini
08:59 PM Bug report #11834: qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>::clear()
Giovanni Manghi wrote:
>
> *) can you remove layers, simplify the project and leave with 1 or a
> few layers that w...
Alexander Novoselov
05:38 PM Bug report #11834: qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>::clear()
Also, does it still crash if you disable parallel rendering? (Options > Rendering > Render layers in parallel using m... Martin Dobias
08:24 PM Bug report #11868 (Closed): qgis composer legend item wrongly clips polygon symbols with large bo...
Hmm, well, whatever happened which led to legend symbol clipping, it isn't straightforward. Martin (and I using a bla... Mathieu Pellerin - nIRV
08:07 PM Bug report #11868 (Closed): qgis composer legend item wrongly clips polygon symbols with large bo...
I've just noticed that the composer legend item wrongly clips polygon symbols featuring large border width values. Th... Mathieu Pellerin - nIRV
02:51 PM Bug report #11867 (Closed): WFS-T request failure for GeoServer/PostGIS
When editing a PostGIS database through a GeoSever WFS - the server response comes back as empty.
However when editi...
Liam Grimmett
11:00 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
For the record, I've pushed an experimental version of the suggested approach here:
https://github.com/strk/QGIS/tree...
Sandro Santilli
02:49 AM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
Thanks for the insights Martin, I'll make this enhancement part of the work for #11859 then. Work is in progress Sandro Santilli
10:22 AM Bug report #11857: batching of rasterize function
fixed here
https://github.com/qgis/QGIS/pull/1737
is a trivial patch, you can modify the file yourself by adding t...
Giovanni Manghi
08:56 AM Bug report #11857: batching of rasterize function
sorry I forgot the screencast.. Marcel Gangwisch
08:38 AM Bug report #11857: batching of rasterize function
I saw your screencast, I think it does not work for me...
I also made you a screencast.
Marcel Gangwisch
08:13 AM Bug report #11857: batching of rasterize function
Marcel Gangwisch wrote:
> of cause I also receive this error message if I fill both lines
see attached screencast, d...
Giovanni Manghi
07:51 AM Bug report #11857: batching of rasterize function
of cause I also receive this error message if I fill both lines Marcel Gangwisch
07:08 AM Bug report #11857 (Closed): batching of rasterize function

> This time I attached again a screenshot showing that I did not check the button for "write values into an existing...
Giovanni Manghi
07:08 AM Bug report #11857 (Closed): batching of rasterize function

> This time I attached again a screenshot showing that I did not check the button for "write values into an existing...
Giovanni Manghi
05:47 AM Bug report #11857: batching of rasterize function
Giovanni Manghi wrote:
> Marcel Gangwisch wrote:
> > Yes I know what you mean, but in QGIS 2.4 it was also possible t...
Marcel Gangwisch
05:00 AM Bug report #11857: batching of rasterize function
Marcel Gangwisch wrote:
> Yes I know what you mean, but in QGIS 2.4 it was also possible to use the rasterize functio...
Giovanni Manghi
04:26 AM Bug report #11857: batching of rasterize function
Yes I know what you mean, but in QGIS 2.4 it was also possible to use the rasterize function without having existing ... Marcel Gangwisch
02:36 AM Bug report #11857: batching of rasterize function
I think there is a misunderstanding here: the tools does not ask for an output folder, is asks for output files. In c... Giovanni Manghi
08:03 AM Bug report #11805 (Closed): Alignment by expression not working after using “wordwrap” instead of...
Fixed in changeset commit:"d28619da07b1eca60d412ef60d422731f949252a". Salvatore Larosa
07:47 AM Bug report #11865: Select by rectangle tool and rotation
I agree and had already commented about this on github. Giovanni Manghi
07:11 AM Bug report #11865 (Closed): Select by rectangle tool and rotation
When map canvas rotated "Select by rectangle" tool consider rotation. I think it should not consider rotation.
Alexander Bruy
07:39 AM Bug report #11866 (Closed): Globo
duplicate of #9818
Giovanni Manghi
07:39 AM Bug report #11866 (Closed): Globo
duplicate of #9818
Giovanni Manghi
07:39 AM Bug report #11866 (Closed): Globo
duplicate of #9818
Giovanni Manghi
07:19 AM Bug report #11866 (Closed): Globo
Hi,
Qgis crash when i click on globo.
Process: QGIS [4765]
Path: /Applications/QGIS.app/Conten...
emiliano manzo
07:29 AM Bug report #11862: Overview map does not follow map rotation
To be honest I tought it would have been nicer to NOT rotate the overview map but rather the indicator of the viewpor... Sandro Santilli
07:07 AM Bug report #11862: Overview map does not follow map rotation
I was sure that this is evident. When main map is rotated overview is not rotated, but it should Alexander Bruy
05:34 AM Bug report #11862: Overview map does not follow map rotation
Could you be more specific about what you'd like to see happen ?
See also #11816 for an example of specific bug.
Do w...
Sandro Santilli
04:27 AM Bug report #11862 (Closed): Overview map does not follow map rotation
Subject says it all Alexander Bruy
06:33 AM Bug report #11864 (Closed): wfs parsing of decimal value results in QString
When opening a (gml) WFS layer from geoserver with values such as:
0.01206198041412
the resulting field seen in th...
Maarten Pronk
06:26 AM Bug report #11849: Zonal stats plugin not working with spatialite layer
I don't recall this ever working in my experience (>1.8). I have confirmed it does not work with 2.4. Would be nice... Mitchell Weier
05:58 AM Bug report #11863 (Closed): invalid sld for graduated style on field with negative values
When creating a graduated style on a field with negative values, the resulting sld file has the following xml:
...
Maarten Pronk
05:36 AM Bug report #11861 (Closed): $area calculation
The "AREA" field in the shape you attached is of type double with length 19 with 16 of those spaces for the decimal p... Giovanni Manghi
05:36 AM Bug report #11861 (Closed): $area calculation
The "AREA" field in the shape you attached is of type double with length 19 with 16 of those spaces for the decimal p... Giovanni Manghi
05:07 AM Bug report #11861: $area calculation
here the shp file. I've the same error with +all+ layer.
lorenzo potè
lorenzo pote
05:06 AM Bug report #11861: $area calculation
here the shp file. I've the same error with +all+ layer.
lorenzo potè
lorenzo pote
03:54 AM Bug report #11861 (Feedback): $area calculation
please attach the vector. Giovanni Manghi
03:54 AM Bug report #11861 (Feedback): $area calculation
please attach the vector. Giovanni Manghi
03:54 AM Bug report #11861 (Feedback): $area calculation
please attach the vector. Giovanni Manghi
03:45 AM Bug report #11861 (Closed): $area calculation
Goodmorning,
in qgis 2.6 the $area calculation from field calculator returns errors for every record: it returns alwa...
lorenzo pote
05:19 AM Bug report #11845: QGIS startup is slow on windows with --configpath option
New tests today, problem is back..
I found several things:
- Microsoft CSC cache is due to offline sync of some fil...
Regis Haubourg
02:12 AM Bug report #10762 (Closed): 2.4 build failure with old gcc
Merged in commit:581cac7
Thank you very much
Matthias Kuhn
01:04 AM Bug report #11858: Map Composer and QGIS crash when trying to print or export using raster layers
Soren Lindqvist wrote:
> No I have not tried on 64bit version, I will try with Mac in the coming days. I do not have ...
Giovanni Manghi

2014-12-14

11:42 PM Bug report #11857: batching of rasterize function
Hm after reinstall, I get the same problem, that there is no field to type the output directory.
See attached screens...
Marcel Gangwisch
11:25 PM Bug report #11857: batching of rasterize function
I'm using QGIS 2.6.0 - Brighton 64 Bit on Windows 7 also 64 Bit...
And my version is compiled against GDAL 1.11.0...
...
Marcel Gangwisch
03:22 AM Bug report #11857 (Feedback): batching of rasterize function
are you sure you are using the latest Processing version and you don't have a old update masking the latest code? It ... Giovanni Manghi
03:22 AM Bug report #11857 (Feedback): batching of rasterize function
are you sure you are using the latest Processing version and you don't have a old update masking the latest code? It ... Giovanni Manghi
06:11 AM Bug report #11858: Map Composer and QGIS crash when trying to print or export using raster layers
No I have not tried on 64bit version, I will try with Mac in the coming days. I do not have other platforms available... Soren Lindqvist
03:24 AM Bug report #11858 (Feedback): Map Composer and QGIS crash when trying to print or export using ra...
Have you tested on QGIS 64bit? and on another platform (like Linux)? Can you share a sample project and data? Giovanni Manghi
03:24 AM Bug report #11858 (Feedback): Map Composer and QGIS crash when trying to print or export using ra...
Have you tested on QGIS 64bit? and on another platform (like Linux)? Can you share a sample project and data? Giovanni Manghi
04:13 AM Bug report #6113: Selection of features does not work correctly with "point displacement" renderer
see also #11840 Giovanni Manghi
04:13 AM Bug report #11840 (Closed): Point displacement and selection
duplicate of #6113 Giovanni Manghi
04:13 AM Bug report #11840 (Closed): Point displacement and selection
duplicate of #6113 Giovanni Manghi
04:09 AM Bug report #11839 (Feedback): add WxS layer from browser defaults to first projection instead of ...
I just tested and here on qgis 2.6.1 works exactly as you propose. Giovanni Manghi
04:09 AM Bug report #11839 (Feedback): add WxS layer from browser defaults to first projection instead of ...
I just tested and here on qgis 2.6.1 works exactly as you propose. Giovanni Manghi
04:03 AM Bug report #11808: [2.6.1] problem upload in the attribute table with $x $y
cannot replicate with the data you attached either. Giovanni Manghi
03:58 AM Bug report #11849: Zonal stats plugin not working with spatialite layer
Confirmed also on Linux. Should be interesting to check if it ever worked in past qgis releases. Giovanni Manghi
03:58 AM Bug report #11849: Zonal stats plugin not working with spatialite layer
Confirmed also on Linux. Should be interesting to check if it ever worked in past qgis releases. Giovanni Manghi
03:45 AM Bug report #11850 (Feedback): Can't classify based on joined column
It works fine here, please attach sample data, it may depend on what formats you are using. Giovanni Manghi
03:45 AM Bug report #11850 (Feedback): Can't classify based on joined column
It works fine here, please attach sample data, it may depend on what formats you are using. Giovanni Manghi
03:45 AM Bug report #11850 (Feedback): Can't classify based on joined column
It works fine here, please attach sample data, it may depend on what formats you are using. Giovanni Manghi
03:42 AM Bug report #11851: On-the-fly projection shift for EPSG:3375 on QGIS 2.6.1 Brighton for Mac OS X
is Ok on Linux too. Giovanni Manghi
02:11 AM Feature request #3856: Extents of print composer maps are not updated when the project CRS changes
Oliver Story wrote:
> This seems like a bug to me.
>
> I would describe it as "Extents of print composer maps are no...
Giovanni Manghi
02:11 AM Feature request #3856: Extents of print composer maps are not updated when the project CRS changes
Oliver Story wrote:
> This seems like a bug to me.
>
> I would describe it as "Extents of print composer maps are no...
Giovanni Manghi
02:11 AM Feature request #3856: Extents of print composer maps are not updated when the project CRS changes
Oliver Story wrote:
> This seems like a bug to me.
>
> I would describe it as "Extents of print composer maps are no...
Giovanni Manghi
02:08 AM Bug report #2947: GRASS plugin mapset permission blocks use if user doesn't own PERMANENT
Andrea Pacifici wrote:
> This issue is still present in QGIS 2.6 for Mac OS X downloaded from the KyngChaos page. Usi...
Giovanni Manghi

2014-12-13

11:54 PM Bug report #2947: GRASS plugin mapset permission blocks use if user doesn't own PERMANENT
This issue is still present in QGIS 2.6 for Mac OS X downloaded from the KyngChaos page. Using the GRASS plugin I try... Andrea Pacifici
10:49 PM Bug report #11848 (Closed): Memory errors in QgsComposerLabel
Fixed in changeset commit:"e568493653a8cd5921ad1835df7911d252f00940". Nyall Dawson
05:27 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
This looks to me like a new feature rather than a bug :)
I would suggest to have a new QgsMapLayerLegend implementat...
Martin Dobias
03:31 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
isExpanded() could be used to check for legend being visible, but we can't just skip to create legend node as otherwi... Sandro Santilli
03:02 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
BTW, I tried to find code setting the ShowLegend flag but all I found was it being set in the constructor for QgsLaye... Sandro Santilli
02:44 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
I've found that the call also happen if the whole layer visibility is off, not only if the legend is invisible, but e... Sandro Santilli
02:42 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
Taking it back, showLegend flag is always 1 when the legend is "collapsed" Sandro Santilli
02:33 PM Feature request #11860: getLegendGraphic called for WMS layer while legend is not visible
Hint:
if ( !testFlag( ShowLegend ) )
Sandro Santilli
02:17 PM Feature request #11860 (Closed): getLegendGraphic called for WMS layer while legend is not visible
The getLegendGraphic method of WMS provider is called when map content legend filtering is active, even if the legend... Sandro Santilli
01:38 PM Feature request #11859: Add support for contextual WMS legend graphics
PR (in progress): https://github.com/qgis/QGIS/pull/1735 Sandro Santilli
10:44 AM Feature request #11859: Add support for contextual WMS legend graphics
Related QEP: https://github.com/qgis/QGIS-Enhancement-Proposals/pull/15 Sandro Santilli
07:21 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Giovanni, Mathieu, could you please test https://github.com/qgis/QGIS/pull/1734 ? Sandro Santilli
05:41 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Another attempt at fixing the regression w/out breaking the rendering of rotated map:
https://github.com/qgis/QGIS/pu...
Sandro Santilli
03:52 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
So the "fix" was reverted with fd15a168b23a1d05531e65281d786f65e52be8d4 and I'm now looking at how to better implemen... Sandro Santilli
02:53 AM Bug report #11814 (Reopened): PAL line label placement does not consider map rotation
Reopening to try the pre-rotation approach. Sandro Santilli
02:53 AM Bug report #11814 (Reopened): PAL line label placement does not consider map rotation
Reopening to try the pre-rotation approach. Sandro Santilli
01:40 AM Feature request #3856: Extents of print composer maps are not updated when the project CRS changes
This seems like a bug to me.
I would describe it as "Extents of print composer maps are not updated when the project...
Oliver Story

2014-12-12

10:33 AM Feature request #11859 (Closed): Add support for contextual WMS legend graphics
WMS legend can be dependent on visible extent, when server supports that.
See http://www.mapserver.org/development/rf...
Sandro Santilli
10:26 AM Bug report #11811 (Reopened): rotation regression: zoom to mouse cursor using mouse wheel is broken
Actually the fix is invalid in that it breaks proper rendering of rotation :( Sandro Santilli
09:00 AM Bug report #11811 (Closed): rotation regression: zoom to mouse cursor using mouse wheel is broken
Merged as 40e0d78b42474c698cc66e549bfb18d9867167b2 Sandro Santilli
09:00 AM Bug report #11811 (Closed): rotation regression: zoom to mouse cursor using mouse wheel is broken
Merged as 40e0d78b42474c698cc66e549bfb18d9867167b2 Sandro Santilli
04:42 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
A more hackish approach is in test (by Travis, already tested locally) here: https://github.com/qgis/QGIS/pull/1732 Sandro Santilli
04:36 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Alright the problem is in the assumption made in QgsMapCanvasMap::paint that a different size between item and image ... Sandro Santilli
04:20 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
The bogus "item" size is obtained via boundingRect, which is a QT standard method:
http://qt-project.org/doc/qt-4.8/q...
Sandro Santilli
04:15 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
In-between there's the ::setContent call, but it is like the item size is lost on next ::paint:
src/gui/qgsmapcanvas...
Sandro Santilli
04:06 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Example output on zoom out:
src/gui/qgsmapcanvasmap.cpp: 51: (paint) [4ms] XXXXX QgsMapCanvasMap::paint, img 781,819 ...
Sandro Santilli
03:57 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
I've found that QgsMapCanvasMap::pain gets called twice on every zoom-wheel event.
The first time it gets called with...
Sandro Santilli
09:00 AM Bug report #11858 (Closed): Map Composer and QGIS crash when trying to print or export using rast...
Hello!
I have been trying with both winXP and win2003 server SP2 Enterprise 32 bit to print or export to pdf file and...
Soren Lindqvist
06:27 AM Bug report #11857: batching of rasterize function
see also the reference for the function:
http://docs.qgis.org/2.6/de/docs/user_manual/processing_algs/gdalogr/gdal_co...
Marcel Gangwisch
06:25 AM Bug report #11857 (Closed): batching of rasterize function
This bug is only concerning the new version 2.6... It works on 2.4.
If you try to convert several shapes to raster u...
Marcel Gangwisch
05:26 AM Bug report #11196 (Closed): Filtered layers editing misbehaving
Jürgen Fischer
02:44 AM Bug report #11814 (Closed): PAL line label placement does not consider map rotation
Label placement (for horizontal and parallel) is supported as of commit 917cee0510cdba4a52cae4a785a974808ecb7a56
I've...
Sandro Santilli
02:44 AM Bug report #11814 (Closed): PAL line label placement does not consider map rotation
Label placement (for horizontal and parallel) is supported as of commit 917cee0510cdba4a52cae4a785a974808ecb7a56
I've...
Sandro Santilli
02:44 AM Bug report #11814 (Closed): PAL line label placement does not consider map rotation
Label placement (for horizontal and parallel) is supported as of commit 917cee0510cdba4a52cae4a785a974808ecb7a56
I've...
Sandro Santilli
02:43 AM Feature request #11856 (Open): Refactor PAL labeling to work on device coordinate space
Pre scaling, translating and rotating vector input would make label placement algorithms fully support rotation and p... Sandro Santilli
02:35 AM Bug report #11855 (Closed): pre-set DPI not equal to painter's DPI (96 vs 72)
Running the testsuite in master (pre 2.8.0) I get this assertion failure:
112: -- Running /usr/bin/python /usr/src/q...
Sandro Santilli
02:19 AM Feature request #11854 (Closed): Symbol size definition : width and heigth
I would like to set the size of symbol with height en width properties (see capture).
We can do that only with Elli...
Herve Christol
02:17 AM Bug report #11853 (Closed): Segfault on exit running test PyQgsPalLabelingCanvas
It looks like a thread is not being waited for completion:... Sandro Santilli
01:47 AM Feature request #4749 (Closed): editable option for combo box in value relation editor cannot be ...
Denis Rouzaud
01:44 AM Bug report #11852 (Closed): Removing linked feature doesn't clear the embed form
In the relation reference widget, with embed form, if you clear the linked feature --i.e. select row "NULL (no select... Denis Rouzaud

2014-12-11

12:57 AM Bug report #11845: QGIS startup is slow on windows with --configpath option
I am confuzed, I run the same tests as yesterday, and I have no more that file creation error.
Everything goes well ...
Regis Haubourg
05:55 PM Bug report #11845 (Feedback): QGIS startup is slow on windows with --configpath option
Not sure if this is really QGIS problem. If you use --configpath to an ordinary path on your local disk, would it be ... Martin Dobias
06:29 AM Bug report #11845 (Closed): QGIS startup is slow on windows with --configpath option
Hi all,
we experience very slow startup (from 1 to 5 minutes) on windows with QGIS 2.x (last test with 2.6.1) when ...
Regis Haubourg
06:05 PM Bug report #11851 (Closed): On-the-fly projection shift for EPSG:3375 on QGIS 2.6.1 Brighton for ...
I'm using QGIS 2.6.1 Brighton (Kyngchaos) on a newly installed Mac OS X Yosemite. There's an apparent shift (hundreds... Nizar Damis
03:48 PM Bug report #11850 (Closed): Can't classify based on joined column
Cannot seem to classify based on joined column. If classify instead using concat("<column name>") works just fine.
S...
Christopher Young
02:52 PM Bug report #11849 (Closed): Zonal stats plugin not working with spatialite layer
It appears that the zonal stats plugin will add the max, min, and mean columns to a spatialite layer, but they are no... Mitchell Weier
02:10 PM Bug report #11848: Memory errors in QgsComposerLabel
The memory error is still there as of commit cee539aae8d0ee3e11edb06f845c84f75566ad96 :
src/core/qgscoordinaterefere...
Sandro Santilli
01:51 PM Bug report #11848 (Closed): Memory errors in QgsComposerLabel
Running qgs_atlascompositiontest under valgrind shows (among qt-internal issues) a memory error which seems to be our... Sandro Santilli
01:25 PM Bug report #11814: PAL line label placement does not consider map rotation
The vectors are not pre-rotated by the provider, but the MapSetting's matrix (QgsMapToPixel) would be able to both ro... Sandro Santilli
12:50 PM Bug report #11814: PAL line label placement does not consider map rotation
Hi Sandro,
Correct me if I am wrong (have not had time to review your map rotation committed changes), but unless th...
Larry Shaffer
02:03 AM Bug report #11814: PAL line label placement does not consider map rotation
Some support for map rotation in labels rendering is been pushed here:
https://github.com/qgis/QGIS/pull/1729
Larry ...
Sandro Santilli
11:42 AM Bug report #11846 (Closed): Commit errors dialogue font causes misleading information due to non-...
Commit errors dialogue font causes misleading information due to non-monospaced font. See caret location in attached ... Drew Nix
08:36 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
I've tested b774853 (right before rotation change) and the problem does not occur. So this is really related to the r... Sandro Santilli
08:07 AM Bug report #11808: [2.6.1] problem upload in the attribute table with $x $y
Hi,
Attached with this message, a shapefile with the problem explained.
Thanks,
pi se
07:54 AM Bug report #11843 (Closed): Oracle provider is not able to handle non-geometric tables correctly
Fixed in changeset commit:"e5e85a5445b469de99b7bfc7c70fe2534ce76482". Jürgen Fischer
02:54 AM Bug report #11843 (Closed): Oracle provider is not able to handle non-geometric tables correctly
Hello,
it seems that the Oracle provider of QGis is not able to handle non-geometric tables correctly.
Under Python...
Médéric RIBREUX
05:50 AM Bug report #9325 (Feedback): Saving as Spatialite saves as SQLite that allows setting width of th...
This is because in this case layer loaded via OGR data provider, not native SpatiaLite. If you open this layer using ... Alexander Bruy
05:39 AM Bug report #9259 (Closed): SpatiaLite new column issue
Closing, as original issue was fixed. Alexander Bruy
05:39 AM Bug report #9259 (Closed): SpatiaLite new column issue
Closing, as original issue was fixed. Alexander Bruy
05:27 AM Bug report #11841 (Closed): settings atlas feature leads to NaNs for scale and coordinates
Fixed in changeset commit:"7f8006f93bf924588ebbb3def0c8609f066bc2fe". Denis Rouzaud
02:16 AM Bug report #11841 (Closed): settings atlas feature leads to NaNs for scale and coordinates
Using the action "set atlas feature for...", correctly opens the composer and sets the correct feature but the map is... Denis Rouzaud
05:19 AM Bug report #11475: bad bracket simplification in expression
https://github.com/qgis/QGIS/pull/1730 Denis Rouzaud
04:40 AM Bug report #7946 (Closed): Move raster Thumbnails, Legend, and Palette from General to Style tab
Alexander Bruy
04:38 AM Bug report #11842 (Closed): Python error shown after clicking "Run" on an algorithm in an empty p...
Fixed in commit:c8b90186b1 Alexander Bruy
04:38 AM Bug report #11842 (Closed): Python error shown after clicking "Run" on an algorithm in an empty p...
Fixed in commit:c8b90186b1 Alexander Bruy
02:38 AM Bug report #11842 (Closed): Python error shown after clicking "Run" on an algorithm in an empty p...
Open an empty project - > Click "run" on any algorithm - > Python error. Either a message should be shown or the "Run... Filipe Dias
04:29 AM Bug report #11736 (Closed): Processing "Join atributes by location" ignored the option "only keep...
Alexander Bruy
02:46 AM Bug report #11736 (In Progress): Processing "Join atributes by location" ignored the option "only...
Alexander Bruy
02:45 AM Bug report #11736 (Closed): Processing "Join atributes by location" ignored the option "only keep...
Fixed in changeset commit:"0d8cb3c1a942d5886117eb4c5b4f3156370f6d13". Alexander Bruy
01:55 AM Bug report #10762: 2.4 build failure with old gcc
https://github.com/qgis/QGIS/pull/1728 landry Landry Breuil
01:55 AM Bug report #10762: 2.4 build failure with old gcc
https://github.com/qgis/QGIS/pull/1728 landry Landry Breuil
01:55 AM Bug report #10762: 2.4 build failure with old gcc
https://github.com/qgis/QGIS/pull/1728 landry Landry Breuil
01:46 AM Bug report #10445 (Closed): Batch Processing - Select from open layers - number of rows
Works as expected in master Alexander Bruy
01:46 AM Bug report #10445 (Closed): Batch Processing - Select from open layers - number of rows
Works as expected in master Alexander Bruy
01:32 AM Bug report #11738: Select by location does not work anymore if the intersection layer is a point ...
Found the issue. This was caused by old pull-request https://github.com/qgis/QGIS/pull/1495. Alexander Bruy
01:29 AM Bug report #9110 (Closed): Empty SAGA help
Loading help from online copy of User Guide now implemented. Please reopen if necessary. Alexander Bruy
01:29 AM Bug report #9110 (Closed): Empty SAGA help
Loading help from online copy of User Guide now implemented. Please reopen if necessary. Alexander Bruy
01:27 AM Bug report #9867 (Closed): Advanced Python field calculator needs documentation
Now Processing used help from User Guide. Reopen if necessary Alexander Bruy
01:27 AM Bug report #9867 (Closed): Advanced Python field calculator needs documentation
Now Processing used help from User Guide. Reopen if necessary Alexander Bruy
01:27 AM Bug report #11840 (Closed): Point displacement and selection
I use Point displacement style since I have some points sharing the same coordinates.
When opening the Attribute tabl...
Davide Continanza
01:25 AM Bug report #11839 (Closed): add WxS layer from browser defaults to first projection instead of pr...
When adding a WMS layer from the browser, it will default to the first EPSG code listed in the getcapabilities docume... landry Landry Breuil
01:25 AM Bug report #11725 (Closed): qgis "convex hull" by classes does not work in Processing (but is ok ...
Alexander Bruy
01:20 AM Feature request #5387 (Closed): Add GDAL help pages to Processing
Processing now loads help from online User Guide. Please reopen if necessary. Alexander Bruy
01:20 AM Feature request #5387 (Closed): Add GDAL help pages to Processing
Processing now loads help from online User Guide. Please reopen if necessary. Alexander Bruy
01:15 AM Bug report #9857 (Closed): Hub lines tool needs documentation
Now tool used documentation from online User Guide. Please reopen if necessary. Alexander Bruy
01:15 AM Bug report #9857 (Closed): Hub lines tool needs documentation
Now tool used documentation from online User Guide. Please reopen if necessary. Alexander Bruy
01:07 AM Bug report #10636 (Feedback): Translation for command description and help in Processing: GRASS a...
As algorithm help now part of the User Guide and translated with it, and Processing itself also i18n capable can we c... Alexander Bruy
01:05 AM Bug report #10660 (Closed): Empty HTML results
Alexander Bruy

2014-12-10

12:49 AM Bug report #11837 (Open): FILTER parameter not working
then I'll tag this as blocker. Giovanni Manghi
12:49 AM Bug report #11837 (Open): FILTER parameter not working
then I'll tag this as blocker. Giovanni Manghi
12:49 AM Bug report #11837 (Open): FILTER parameter not working
then I'll tag this as blocker. Giovanni Manghi
11:17 PM Bug report #11837: FILTER parameter not working
No it used to work (if I recall correctly) in 2.6.0
The FILTER parameter is a feature that has been introduced in QGI...
Bernhard Ströbl
09:56 AM Bug report #11837 (Feedback): FILTER parameter not working
this was an issue in previous qgis server releases? Giovanni Manghi
05:09 AM Bug report #11837 (Closed): FILTER parameter not working
The FILTER parameter has no effect on the features returned by the WMS GetMap request.
Affected are at least versions...
Bernhard Ströbl
11:55 PM Bug report #11836: "Drag and drop designer" crashes QGIS when a text edit, multiline field is rep...
The problem is in "edit widget" when selected "Multiline". No crashes when marking "Multiline" removed. I've tried to... Giedrius Vaivilavičius
11:55 PM Bug report #11836: "Drag and drop designer" crashes QGIS when a text edit, multiline field is rep...
The problem is in "edit widget" when selected "Multiline". No crashes when marking "Multiline" removed. I've tried to... Giedrius Vaivilavičius
11:53 AM Bug report #11836 (Feedback): "Drag and drop designer" crashes QGIS when a text edit, multiline f...
I just tested with data of my own (PostGIS), on Linux and Windows, and cannot replicate, even duplicating on purpose ... Giovanni Manghi
11:53 AM Bug report #11836 (Feedback): "Drag and drop designer" crashes QGIS when a text edit, multiline f...
I just tested with data of my own (PostGIS), on Linux and Windows, and cannot replicate, even duplicating on purpose ... Giovanni Manghi
03:35 AM Bug report #11836 (Closed): "Drag and drop designer" crashes QGIS when a text edit, multiline fie...
*New description:*
Add a layer
use D&D design to add into two different tabs the same text field with a multiline t...
Giedrius Vaivilavičius
01:35 PM Bug report #11223: Vector layer VRT stopped working in master
Confirmed. Bug still present. dr -
12:56 PM Bug report #11223 (Reopened): Vector layer VRT stopped working in master
I am afraid this is still not fixed. Confirmed on Windows, Ubuntu and Fedora on two different machines, latest trunk. Maxim Dubinin
12:56 PM Bug report #11223 (Reopened): Vector layer VRT stopped working in master
I am afraid this is still not fixed. Confirmed on Windows, Ubuntu and Fedora on two different machines, latest trunk. Maxim Dubinin
11:28 AM Bug report #11835 (Feedback): Print layout not saved within project file on Mac OSX
sounds weird it does not work as expected on Mac. can you try qgis 2.6.1 ? thanks Giovanni Manghi
11:28 AM Bug report #11835 (Feedback): Print layout not saved within project file on Mac OSX
sounds weird it does not work as expected on Mac. can you try qgis 2.6.1 ? thanks Giovanni Manghi
02:13 AM Bug report #11835 (Closed): Print layout not saved within project file on Mac OSX
Working on a QGIS project on Windows I am used to the print layout/composer being saved with the project, however whe... Michael Dunne
11:27 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Sandro Santilli wrote:
> I've seen the effect of first zooming to center too, but I saw it also before the rotation c...
Giovanni Manghi
03:24 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
I've seen the effect of first zooming to center too, but I saw it also before the rotation change, can anyone confirm... Sandro Santilli
02:00 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
ok, I see there is a painting artefact. I can reproduce that here by the way, best with a simple vector layer.
It see...
Richard Duivenvoorde
01:30 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Giovanni, excellent video, it does a much better job than my video at showing what's wrong.
Mathieu Pellerin - nIRV
11:24 AM Bug report #11834: qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>::clear()
Alexander Novoselov wrote:
> Giovanni Manghi wrote:
> > please attach a project (and a sample of data) to allow us te...
Giovanni Manghi
02:13 AM Bug report #11834: qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>::clear()
Giovanni Manghi wrote:
> please attach a project (and a sample of data) to allow us test locally.
all layers - postg...
Alexander Novoselov
10:55 AM Bug report #8760: Custom Form from .ui File crashes QGIS on Ubuntu
Searching the internet brought me to these possibly related reports:
https://bugs.kde.org/show_bug.cgi?id=182810
whi...
Matthias Kuhn
10:01 AM Bug report #11814: PAL line label placement does not consider map rotation
@dakarto: am I right that candidate label boxes are NOT stored as rotated, when being parallel to lines ?
as per:
...
Sandro Santilli
09:56 AM Bug report #10976: attribute table refresh problems after edits
Filipe Dias wrote:
> I received reports from users that thought Field Calculator was not working because of this bug....
Giovanni Manghi
03:47 AM Bug report #10976: attribute table refresh problems after edits
I received reports from users that thought Field Calculator was not working because of this bug. It is very annoying ... Filipe Dias
09:55 AM Bug report #11822: Unable to install on Windows 7, 64bit
Fredrik Blom wrote:
> Installed as admin: Yes
> Anti-virus installed: Microsoft Security Essentials free version. Not...
Giovanni Manghi
05:19 AM Bug report #11822: Unable to install on Windows 7, 64bit
Installed as admin: Yes
Anti-virus installed: Microsoft Security Essentials free version. Not very picky, and nothing...
Fredrik Blom
03:45 AM Feature request #11328: Increase the font size in the Modeller and in the Script editor
I'm attaching a screenshot as an example. In this piece of code, the user has to be very careful with the "( )" and i... Filipe Dias
03:01 AM Bug report #11832: Rotation value retain when new project created
But after loading any layer to this new project extent and scale adjusted to match layer extent. IMO getting rotated ... Alexander Bruy
02:22 AM Bug report #11832: Rotation value retain when new project created
Center (extent) and scale are also retained, why should rotation not be ? Sandro Santilli
02:18 AM Bug report #11829: rotation spin box should be moved to project properties
-1 for hiding it. I do think it belongs in the status bar. A more improved version in the future could be a small wh... Nathan Woodrow
01:59 AM Bug report #11829: rotation spin box should be moved to project properties
Hey thanks for the keyboardTracking property, I didn't know about it. I saw you added that with commit 21c4cbbe1a600a... Sandro Santilli
01:38 AM Bug report #11833 (Closed): Inconsistent behavior of rotation spinbox
Fixed in changeset commit:"21c4cbbe1a600a4b3a1d5313bc07feafe2901aea". Nyall Dawson

2014-12-09

12:19 AM Bug report #11834 (Feedback): qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule...
please attach a project (and a sample of data) to allow us test locally. Giovanni Manghi
10:57 PM Bug report #11834 (Closed): qgis.bin crashed with SIGABRT in QList<QgsRuleBasedRendererV2::Rule*>...
Crash after simple zooming and panning map
parallel rendering - OFF...
Alexander Novoselov
12:16 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Richard Duivenvoorde wrote:
> yes, I have seen that behaviour, that it is not exactly centering on your cursor, but I...
Giovanni Manghi
11:49 PM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
yes, I have seen that behaviour, that it is not exactly centering on your cursor, but I also tried it in 2.4 and 2.2 ... Richard Duivenvoorde
10:25 PM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Here's a video recording of the regression. The map canvas does actually get zoomed to the mouse cursor, the regressi... Mathieu Pellerin - nIRV
03:09 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Also not confirmed here... Matthias Kuhn
02:39 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
I cannot reproduce this too. I've tried it with current master and qgis 2.6 here. To me they behave the same? Richard Duivenvoorde
12:01 AM Bug report #11269: can't access in Python to new features added to editBuffer
I can't understand.
2.6.1 Brighton remains affected to this issue. And Only on XP systems. In all other platform I te...
enrico ferreguti
10:51 PM Bug report #11833 (Closed): Inconsistent behavior of rotation spinbox
Map canvas rotate each time I enter digit in rotation spinbox. For example, I want to rotate canvas by 120 degrees, w... Alexander Bruy
10:44 PM Bug report #11832 (Closed): Rotation value retain when new project created
Subject says it all. Alexander Bruy
09:56 PM Feature request #6988: Print Composer - Centered map
Got some answer saying that it has been fixed in latest api version. But i am also facing the same issue. I tried usi... Mohanakarthick Balan
09:48 PM Feature request #6988: Print Composer - Centered map
Hi
"Not able to center map in map canvas" through coding - Reference (Feature request #6988 - facing same problem )
...
Balaji S R
09:41 PM Bug report #11831 (Closed): Feature request #6988 - Facing same problem
Please just comment on the original ticket not open a new one. Nathan Woodrow
09:41 PM Bug report #11831 (Closed): Feature request #6988 - Facing same problem
Please just comment on the original ticket not open a new one. Nathan Woodrow
09:35 PM Bug report #11831 (Closed): Feature request #6988 - Facing same problem
Hi
"Not able to center map in map canvas" through coding - Reference (Feature request #6988 - facing same problem )
...
Balaji S R
03:15 PM Bug report #11830 (Closed): QgsMapRendererSequentialJob is truncating text.
I've been using the following python code for rendering, however it causes text to get partially displayed at the ima... Michael gledhill
03:09 PM Bug report #11829: rotation spin box should be moved to project properties
-1 for me. As an hidden option, it will go unnoticed, and will be more difficult to use interactively. Paolo Cavallini
12:08 PM Bug report #11829 (Closed): rotation spin box should be moved to project properties
Given that it will mostly be set just once for a project, the rotation spin box should be moved to project properties... Nyall Dawson
01:15 PM Bug report #11822 (Feedback): Unable to install on Windows 7, 64bit
are you installing as admin? maybe a very tight anti-something? Did you try install on another system to rule out loc... Giovanni Manghi
01:15 PM Bug report #11822 (Feedback): Unable to install on Windows 7, 64bit
are you installing as admin? maybe a very tight anti-something? Did you try install on another system to rule out loc... Giovanni Manghi
01:15 PM Bug report #11822 (Feedback): Unable to install on Windows 7, 64bit
are you installing as admin? maybe a very tight anti-something? Did you try install on another system to rule out loc... Giovanni Manghi
06:05 AM Bug report #11822 (Closed): Unable to install on Windows 7, 64bit
I've tried to install QGIS 2.6.1 on my Windows 7, x64 machine, but the installer keeps on stopping when it is about 8... Fredrik Blom
10:11 AM Feature request #11828 (In Progress): Add visual changelog entries as QGIS startup tooltips
QGIS tips could be made richer by adding individual visual changelog entries as separate tips. In this way, user will... Paolo Cavallini
10:09 AM Bug report #11809 (Open): Datatype of computed columns falls back to text
Samuel Ingarfield wrote:
> Have just now tested in 2.2 and 2.4, am experiencing the same behaviour in both versions.
...
Giovanni Manghi
04:24 AM Bug report #11809: Datatype of computed columns falls back to text
Have just now tested in 2.2 and 2.4, am experiencing the same behaviour in both versions. Samuel Ingarfield
03:33 AM Bug report #11809: Datatype of computed columns falls back to text
Matthias Kuhn wrote:
> Can you provide the python code you use and a test dataset?
See attached.
Giovanni Manghi w...
Samuel Ingarfield
03:33 AM Bug report #11809: Datatype of computed columns falls back to text
Matthias Kuhn wrote:
> Can you provide the python code you use and a test dataset?
See attached.
Giovanni Manghi w...
Samuel Ingarfield
03:28 AM Bug report #11809: Datatype of computed columns falls back to text
Samuel Ingarfield wrote:
> Yep, I've just now reproduced this behaviour in 2.6.1
the import bit here (to say if it i...
Giovanni Manghi
03:11 AM Bug report #11809: Datatype of computed columns falls back to text
Can you provide the python code you use and a test dataset? Matthias Kuhn
01:42 AM Bug report #11809: Datatype of computed columns falls back to text
Yep, I've just now reproduced this behaviour in 2.6.1 Samuel Ingarfield
01:10 AM Bug report #11809: Datatype of computed columns falls back to text
Samuel Ingarfield wrote:
> This happens both when
> a) Using the 'Load as New Layer' function of DB Manager; and
> b)...
Giovanni Manghi
01:10 AM Bug report #11809: Datatype of computed columns falls back to text
Samuel Ingarfield wrote:
> This happens both when
> a) Using the 'Load as New Layer' function of DB Manager; and
> b)...
Giovanni Manghi
01:10 AM Bug report #11809: Datatype of computed columns falls back to text
Samuel Ingarfield wrote:
> This happens both when
> a) Using the 'Load as New Layer' function of DB Manager; and
> b)...
Giovanni Manghi
01:02 AM Bug report #11809: Datatype of computed columns falls back to text
Note that I have also just reproduced this on Linux (latest nightly) so we're not dealing with some weird windows onl... Samuel Ingarfield
09:30 AM Bug report #11814: PAL line label placement does not consider map rotation
QgsPalLayerSettings::calculateLabelSize is the earlier point of failure I've found for today.
It does indeed looks li...
Sandro Santilli
09:09 AM Bug report #11814: PAL line label placement does not consider map rotation
And, when rotation is active, the height and the width are wrong.
Sandro Santilli
08:53 AM Bug report #11814: PAL line label placement does not consider map rotation
Debugging prints confirm, pal::LabelPosition getX(), getY(), getWidth() and getHeight() all return map (geographical)... Sandro Santilli
08:12 AM Bug report #11814: PAL line label placement does not consider map rotation
Am I reading the code correctly that the PAL library does all its work in geographical units rather than device units... Sandro Santilli
04:12 AM Bug report #11814 (Closed): PAL line label placement does not consider map rotation
Labels placement for lines does not properly consider map rotation.
With "horizontal" placement all labels are horizo...
Sandro Santilli
09:29 AM Bug report #11827 (Closed): Converting offline permanently removes edit types (field ui widgets) ...
Converting offline permanently removes edit types (field ui widgets) from layer.
Steps to reproduce:
Add postgis lay...
Drew Nix
07:50 AM Bug report #11825: fill with centroid draws symbol outside the polygons
Apparently a regression Paolo Cavallini
06:38 AM Bug report #11825 (Closed): fill with centroid draws symbol outside the polygons
In a certain scale range (1:250,000 - 1:5,000) the *fill with centroid* style behavior appears weird.
Centroids are d...
matteo ghetta
07:48 AM Bug report #11826 (Closed): North arrow decoration doesn't consider canvas rotation
Duplicate of #11818 Sandro Santilli
07:48 AM Bug report #11826 (Closed): North arrow decoration doesn't consider canvas rotation
Duplicate of #11818 Sandro Santilli
07:32 AM Bug report #11826 (Closed): North arrow decoration doesn't consider canvas rotation
North arrow decoration doesn't consider canvas rotation Jürgen Fischer
07:30 AM Bug report #11526: Vector layer "Save as..." fails with GDAL 1.11.1
Just to let you know, tested again in Arch Linux with gdal 1.11.1-3 and I still get the same error. Waiting for versi... Daniel Sánchez Pillot Gutiérrez
04:31 AM Bug report #11815: Feature highlight from Identify features misplaced on rotation
Note that the feature selection highlight (from select features tool) renders correctly (in yellow), so this is speci... Sandro Santilli
04:15 AM Bug report #11815 (Closed): Feature highlight from Identify features misplaced on rotation
The rendered feature highlight from identify features gets misplaced on map rotation. Sandro Santilli
04:21 AM Bug report #11818 (Closed): North arrow decoration doesn't follow map rotation
The decoration keeps indicating North being up, reguardless of map rotation. Sandro Santilli
04:19 AM Bug report #11817 (Closed): Grid decoration meaningless with rotated map
When map is rotated the grid decoration is still vertical and horizontal lines but irregular.
I guess it should be ro...
Sandro Santilli
04:17 AM Bug report #11816 (Closed): Panning from the overview map reduces the scale (zooms out) when map ...
When the map is rotated, panning from the overview map results in scale diminishing (zooming out). Sandro Santilli
01:05 AM Feature request #11812 (Closed): Add compression options for outputs ("-co") in gdal tools for Pr...
Giovanni Manghi

2014-12-08

12:20 AM Bug report #11811: rotation regression: zoom to mouse cursor using mouse wheel is broken
Actually it works correctly for me, what could I be missing ? I'm testing with 2 layers, a vector one and a raster on... Sandro Santilli
10:31 PM Bug report #11811 (Closed): rotation regression: zoom to mouse cursor using mouse wheel is broken
The map rotation feature commit introduced a serious regression. When zooming in and out using the mouse wheel over t... Mathieu Pellerin - nIRV
11:40 PM Bug report #5153 (Closed): Unexpected rounding in field calculator (documentation needed)
Fixed in changeset commit:"232aaaca66114e69b9ac2b201c65a26e7379f475". Nyall Dawson
11:33 PM Bug report #11809: Datatype of computed columns falls back to text
This happens both when
a) Using the 'Load as New Layer' function of DB Manager; and
b) Adding layer through Python (u...
Samuel Ingarfield
03:55 PM Bug report #11809 (Feedback): Datatype of computed columns falls back to text
I believe do you refer to the "load as new layer" function of DB Manager, correct? Giovanni Manghi
03:55 PM Bug report #11809 (Feedback): Datatype of computed columns falls back to text
I believe do you refer to the "load as new layer" function of DB Manager, correct? Giovanni Manghi
03:55 PM Bug report #11809 (Feedback): Datatype of computed columns falls back to text
I believe do you refer to the "load as new layer" function of DB Manager, correct? Giovanni Manghi
05:58 AM Bug report #11809 (Closed): Datatype of computed columns falls back to text
When loading SpatiaLite layers, types of computed columns are incorrect. For example, consider a table with an intege... Samuel Ingarfield
03:38 PM Feature request #11103: Support for retina displays (HiDPI)
Please reopen this issue. It is not a duplicate. #11337 is one of several issues related to overall compatibility wit... Joshua Arnott
04:08 AM Feature request #11103 (Closed): Support for retina displays (HiDPI)
duplicate of #11337 Giovanni Manghi
04:08 AM Feature request #11103 (Closed): Support for retina displays (HiDPI)
duplicate of #11337 Giovanni Manghi
02:42 PM Bug report #11800: documentation error in qgis:creategrid and associated errors it Hex grid from ...
Thanks.
I presumed, that since it was part of processing it lived in here somewhere...
At least I know where to put...
ramon .
01:22 PM Bug report #11800 (Closed): documentation error in qgis:creategrid and associated errors it Hex g...
will be fixed when this PR will be committed
https://github.com/qgis/QGIS-Processing/pull/6
but closing because any...
Giovanni Manghi
01:22 PM Bug report #11800 (Closed): documentation error in qgis:creategrid and associated errors it Hex g...
will be fixed when this PR will be committed
https://github.com/qgis/QGIS-Processing/pull/6
but closing because any...
Giovanni Manghi
01:52 PM Bug report #11805: Alignment by expression not working after using “wordwrap” instead of “wrap on...
it seems there is a PR to fix this
https://github.com/qgis/QGIS/pull/1724
Giovanni Manghi
02:03 AM Bug report #11805 (Closed): Alignment by expression not working after using “wordwrap” instead of...
Alignment by expression is not working after using “wordwrap” instead of “wrap on character”:
!http://i.stack.imgur....
Martin Höpke
01:49 PM Bug report #11808 (Feedback): [2.6.1] problem upload in the attribute table with $x $y
I cannot replicate here with any of my data. What data format are you using? what data type are you using for the col... Giovanni Manghi
05:00 AM Bug report #11808 (Closed): [2.6.1] problem upload in the attribute table with $x $y
Hi,
There is some problem when I want to use the function $x or $y of field calculator to upload an existant column...
pi se
01:36 PM Bug report #11810 (Closed): Ok Button not showing when they are a lot of errors in Eliminate Silv...
this is a highly improbable bug, but i have found it today and i decided to share it.
You can Enter Ok and be gone ...
baditaflorin -
05:00 AM Bug report #11807 (Closed): Make "timestamp" datatype available for PostGIS vectors
If you use the "date/time" edit widget to try save date *and* time in a "date" postgis column, then the time is disca... Giovanni Manghi
04:44 AM Bug report #11801 (Feedback): 'Rotate Label' freezes
I cannot replicate using projects/data of my own. This could be something that is data-related, so better if you can ... Giovanni Manghi
04:23 AM Feature request #11069: Add snapping and avoid intersection support for the reshape tool
see also #11802 Giovanni Manghi
04:23 AM Bug report #11802: reshape tool 'avoid intersections' snapping not working as expected
I agree that at least core tools should be work as expected regarding the "avoid intersection". This should also be e... Giovanni Manghi
04:17 AM Bug report #11666: Processing graphical modeler can't open previously saved .model files.
Yes, I saved the model with 2.6. In the toolbox I can find it, but I cant open from the modeler. Major Balazs
04:14 AM Bug report #11666: Processing graphical modeler can't open previously saved .model files.

> But older models are incompatible as far as I know.
I believe that Victor or Alexander made something to allow im...
Giovanni Manghi
03:52 AM Bug report #11666: Processing graphical modeler can't open previously saved .model files.
Are you trying to open a model created using Processing 2.6? I cannot reproduce any issues testing that.
But older m...
Anita Graser
03:46 AM Bug report #11666: Processing graphical modeler can't open previously saved .model files.
The join issue was addressed and fixed in #11694 Anita Graser
04:08 AM Bug report #11337: Attribute Table does not show correctly on high resolution (2880x1620) monitors
see also #11103 Giovanni Manghi
04:08 AM Bug report #11337: Attribute Table does not show correctly on high resolution (2880x1620) monitors
see also #11780 Giovanni Manghi
04:07 AM Feature request #11780 (Closed): QGIS and UHD (4K) monitors
duplicate of #11337 Giovanni Manghi
04:07 AM Feature request #11780 (Closed): QGIS and UHD (4K) monitors
duplicate of #11337 Giovanni Manghi
03:36 AM Bug report #11206 (Open): QGIS Server crashes on GetLegendGraphic and GetFeatureInfo requests wit...
Giovanni Manghi
02:06 AM Bug report #11206: QGIS Server crashes on GetLegendGraphic and GetFeatureInfo requests with master
Similar problem here, with qgis-server 2.6.1.1 on Ubuntu Server 14.04.1 LTS, a clean install. When a GetLegendRequest... Simon Bowyer
02:30 AM Bug report #9920: Add link to sample data
Fine to me, thanks. Paolo Cavallini
02:25 AM Bug report #9920 (Closed): Add link to sample data
I think the text is already better:
http://docs.qgis.org/testing/en/docs/training_manual/processing/intro.html
and ...
Richard Duivenvoorde
02:28 AM Bug report #11804: Settings>Options>Map Tools>Identify: wrong units
Also the search area should be reported in the info window, so to make it explicit to the user what is the area the i... Paolo Cavallini
01:14 AM Bug report #11804 (Closed): Settings>Options>Map Tools>Identify: wrong units
In the spinbox, the parameter is indicated in mm, whereas in the note it is clarified it is in % of map extent. This ... Paolo Cavallini
02:21 AM Feature request #11806 (Open): Server Search in WMS dialog does not give feedback for empty searc...
In the Add Layer from WMS Server there is a tab 'Server Search' which uses the following service:
http://geopole.org...
Richard Duivenvoorde

2014-12-07

01:47 PM Bug report #11800: documentation error in qgis:creategrid and associated errors it Hex grid from ...
I see in this thread http://lists.osgeo.org/pipermail/qgis-community-team/2014-December/004001.html that the document... ramon .
12:32 PM Feature request #11803 (Rejected): Plugins and lack of character encoding.
Paolo Cavallini
11:47 AM Feature request #11803: Plugins and lack of character encoding.
How to close it? Henning Rekvik
11:11 AM Feature request #11803: Plugins and lack of character encoding.
Please open tickets on all relevant plugins, and close this one, as I do not believe this is a general QGIS issue. Paolo Cavallini
10:53 AM Feature request #11803: Plugins and lack of character encoding.
<MMQGIS - Combine - Merge Layers>. I used <Vector - Data Mamangement Tools - Merge Shapefiles to One..> instead. I al... Henning Rekvik
09:38 AM Feature request #11803: Plugins and lack of character encoding.
Which plugin? Paolo Cavallini
08:57 AM Feature request #11803 (Rejected): Plugins and lack of character encoding.
Plugins are useless for others that uses special characters in their language. In Scandinavia we have the same englis... Henning Rekvik
07:32 AM Feature request #9330: Rotate Rendered Map Canvas
Core support added with commit:ce8a9ba4afed849e7d85e9c0773fbc029b24bd15
HUB is open for further issues about rotation
Sandro Santilli
05:35 AM Bug report #11802 (Closed): reshape tool 'avoid intersections' snapping not working as expected
I have two polygon layers, both with snapping on and both with 'avoid intersections' ticked.
I expect that when I...
Gavin Fleming
05:01 AM Bug report #11738: Select by location does not work anymore if the intersection layer is a point ...
Lene Fischer wrote:
> Same problem for function Vector Overlay tool >Intersection
shouldn't be enough to make inters...
Giovanni Manghi

2014-12-06

01:52 PM Bug report #11800: documentation error in qgis:creategrid and associated errors it Hex grid from ...
I notice I've not been clear about which docs I'm talking about.
The documentation in the user guide is correct.
It'...
ramon .
03:47 AM Bug report #11800 (Closed): documentation error in qgis:creategrid and associated errors it Hex g...
Running the "Hex grid from layer" script gives this error:
----
Oooops! The following output layers could not be open...
ramon .
01:40 PM Bug report #11131: GPX plugin always saves absolute path
Jürgen, thanks for fixing this.
Giovanni, one of the main reasons that I don't use the "normal" dialoge is that the ...
ramon .
04:02 AM Bug report #11801 (Closed): 'Rotate Label' freezes
'Rotate Label' freezes after working with it (together with 'Move Feature(s)') a short period of time. I've tried eve... Henning Rekvik

2014-12-05

11:36 PM Feature request #11780: QGIS and UHD (4K) monitors
Including a screenshot of the attribute table from Windows 8.1. James Stott
11:17 PM Feature request #11780: QGIS and UHD (4K) monitors
I have problems on Linux Mint 17.1 as well. Screen resolution is 3200 x 1800. QGIS is by no means the only program wi... James Stott
11:17 PM Feature request #11780: QGIS and UHD (4K) monitors
I have problems on Linux Mint 17.1 as well. Screen resolution is 3200 x 1800. QGIS is by no means the only program wi... James Stott
11:24 AM Feature request #9676: Do not refresh canvas when selecting features
Couldn't this be solved by showing selected features using the same technique as is used for the Identify tool? When ... Spencer Gardner
11:12 AM Bug report #11738: Select by location does not work anymore if the intersection layer is a point ...
Same problem for function Vector Overlay tool >Intersection Lene Fischer
10:50 AM Bug report #11738: Select by location does not work anymore if the intersection layer is a point ...
The problem is a regression - same problem from earlier versions. Lene Fischer
09:38 AM Bug report #11425: make check: 12 tests failed out of 113
As of current master (commit:26e06e6881760103c6d2f005dc15cb26fa221767) 3 tests failed out of 119:
The following tests...
Sandro Santilli
08:02 AM Bug report #11775: Crash after simple zooming and panning map
Alexander Novoselov wrote:
> Giovanni Manghi wrote:
> > probably this should be closed as duplicate of #11141
>
> No...
Giovanni Manghi
07:43 AM Bug report #11775: Crash after simple zooming and panning map
Giovanni Manghi wrote:
> probably this should be closed as duplicate of #11141
No! This bug associated with parallel...
Alexander Novoselov
06:37 AM Bug report #11775: Crash after simple zooming and panning map
probably this should be closed as duplicate of #11141 Giovanni Manghi
05:50 AM Bug report #11775: Crash after simple zooming and panning map
Matthias Kuhn wrote:
> Are you using joins?
No
Alexander Novoselov
05:43 AM Bug report #11775: Crash after simple zooming and panning map
Are you using joins?
Is caching enabled for these joins?
Matthias Kuhn
04:13 AM Bug report #8628: DB Manager does not load PostGIS rasters using QGIS-master for Debian
Now it seems to work, except for -r (out of db) rasters, that crash QGIS Paolo Cavallini
03:21 AM Feature request #11795: SQL windows - execute only selected part of a query.
add to it the possibility to stop a query is running, like pgadmin does. Giovanni Manghi
03:12 AM Feature request #11795: SQL windows - execute only selected part of a query.
+ 1 would be really helpfull! Regis Haubourg
02:16 AM Bug report #11654 (Closed): qgis 2.6/master always saves shapefiles as "multi"
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > so it this to be considered fixed/invalid?
>
> yes, unless you ve...
Giovanni Manghi
02:16 AM Bug report #11654 (Closed): qgis 2.6/master always saves shapefiles as "multi"
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > so it this to be considered fixed/invalid?
>
> yes, unless you ve...
Giovanni Manghi
01:59 AM Feature request #11796 (Closed): Support for .qlr files in QGIS Browser
duplicate of #10737 Giovanni Manghi
01:59 AM Feature request #11796 (Closed): Support for .qlr files in QGIS Browser
duplicate of #10737 Giovanni Manghi
01:38 AM Feature request #11796 (Closed): Support for .qlr files in QGIS Browser
Would be nice if QGIS Layer Definition files (.qlr) were supported in QGIS Browser (both standalone application and p... Joe Mitchell
01:58 AM Feature request #11797 (Closed): Save group of layers as layer definition (.qlr) file
Would be helpful to be able to save a group of layers as a layer definition (.qlr) file so that the same group of lay... Joe Mitchell

2014-12-04

11:58 PM Bug report #10489 (Closed): QGIS Server getcapabilites response is not WMS compliant
Fixed in changeset commit:"072c1e573179727f8d1092f3c9b37d0e99c855a2". Marco Hugentobler
11:25 AM Feature request #11795 (Closed): SQL windows - execute only selected part of a query.
In the sql windows is it possible to execute only selected part of a query, in the same way of pgadmin?
It could be v...
Luca Lanteri
11:15 AM Feature request #11794 (Closed): spatialite connection custom name
now its' impossible to load two spatialite db with the same name beacause the connection name is the same of db name.... Luca Lanteri
10:42 AM Feature request #11793 (Open): multiple layer import
If dbmanager can import multiple layer it could be a nice improvement. Luca Lanteri
10:39 AM Feature request #11792 (Feedback): import - primary key option as combobox
when import change the primary key option from text to combobox and allow to choose only from existing field. Luca Lanteri
08:39 AM Bug report #11654: qgis 2.6/master always saves shapefiles as "multi"
Giovanni Manghi wrote:
> so it this to be considered fixed/invalid?
yes, unless you verified the problem in 2.6.1 or...
Jürgen Fischer
05:46 AM Bug report #11654: qgis 2.6/master always saves shapefiles as "multi"
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > As QGIS now saves all shapes as multipart many tools are basically...
Giovanni Manghi
05:20 AM Bug report #11654: qgis 2.6/master always saves shapefiles as "multi"
Giovanni Manghi wrote:
> As QGIS now saves all shapes as multipart many tools are basically broken with such shapes, ...
Jürgen Fischer
04:42 AM Bug report #11654: qgis 2.6/master always saves shapefiles as "multi"
As QGIS now saves all shapes as multipart many tools are basically broken with such shapes, including editing tools (... Giovanni Manghi
07:12 AM Bug report #11337 (Open): Attribute Table does not show correctly on high resolution (2880x1620) ...
see also #11791 Giovanni Manghi
07:12 AM Bug report #11337 (Open): Attribute Table does not show correctly on high resolution (2880x1620) ...
see also #11791 Giovanni Manghi
07:12 AM Bug report #11337 (Open): Attribute Table does not show correctly on high resolution (2880x1620) ...
see also #11791 Giovanni Manghi
07:12 AM Bug report #11791 (Closed): Font size too large for high res screen
duplicate of #11337 Giovanni Manghi
07:12 AM Bug report #11791 (Closed): Font size too large for high res screen
duplicate of #11337 Giovanni Manghi
06:50 AM Bug report #11791: Font size too large for high res screen
Same issues on QGis 2.6.1.
Andrea Danamaita
06:09 AM Bug report #11791 (Closed): Font size too large for high res screen
I have a laptop with an high res screen (3200x1800) and when I open some dialogs or all table views the characters ex... Andrea Danamaita
05:55 AM Bug report #11790 (Closed): Python bindings for QgsDxfExport.addLayers causes crash
I try to use QgsDxfExport from python but failed adding vector layers using addLayers method. I tried passing argumen... Laurent debomy
05:43 AM Bug report #11573: Int images with floating point gain not displayed properly
Matthew Hanson wrote:
> I would like to request that the "feature" of applying Gain and Offset be reverted until this...
Giovanni Manghi
05:41 AM Bug report #11785: WFS issue (one element as large square box) since 2.0
Confirmed that it started to happen since 2.0.1, so the simplification is not the source of the problem as it wasn't ... Giovanni Manghi
05:37 AM Bug report #11786: Qgis categorized style classification interprets null as zero from Postgis table
This was working as expected in previous QGIS releases (like 2.0.1). Giovanni Manghi
05:37 AM Bug report #11786: Qgis categorized style classification interprets null as zero from Postgis table
This was working as expected in previous QGIS releases (like 2.0.1). Giovanni Manghi
05:37 AM Bug report #11786: Qgis categorized style classification interprets null as zero from Postgis table
This was working as expected in previous QGIS releases (like 2.0.1). Giovanni Manghi
05:37 AM Bug report #11786: Qgis categorized style classification interprets null as zero from Postgis table
This was working as expected in previous QGIS releases (like 2.0.1). Giovanni Manghi
05:13 AM Bug report #11742 (Feedback): Band jumps back to Band 1 each time properties are made on a layer
should be solved with
https://issues.qgis.org/projects/quantum-gis/repository/revisions/e887d075aa4fb27c20f27e60025d...
Giovanni Manghi
01:30 AM Bug report #11499: Style manager fails to load XML from Github URL
Possible to get this fixed. Maybe backport the fix to the 4.7 code for OSGEO4W? Jeremy Palmer

2014-12-03

05:01 PM Bug report #11788 (Closed): core.so: undefined symbol: _ZTI18QgsHeatmapRenderer
Sorry, this was fixed by defining LD_LIBRARY_PATH pointing to the lib folder
like
export LD_LIBRARY_PATH=/home/mish...
Mikhail Tchernychev
04:58 PM Bug report #11788 (Closed): core.so: undefined symbol: _ZTI18QgsHeatmapRenderer
Hi,
I followed instruction and got master version of QGIS. Everything compiles fine, but when I start I got message...
Mikhail Tchernychev
01:25 PM Feature request #11787 (Open): Map Composer: More export options
hi,
It would be nice to be able to export the layout in geotif because it have the advantage of containing the coordi...
Marc-André Saia
11:55 AM Bug report #11786 (Closed): Qgis categorized style classification interprets null as zero from Po...
I realize this is similar to an issue from over seven years ago that was closed #962, but i don't understand the solu... Rob Flemming
07:20 AM Bug report #11785 (Closed): WFS issue (one element as large square box) since 2.0
Since 2.0 some WFS-services anymore couldn't be used anymore.
With 1.8 everything was fine
http://fbinter.stadt-berl...
sitondorf -
07:09 AM Bug report #11573: Int images with floating point gain not displayed properly
I would like to request that the "feature" of applying Gain and Offset be reverted until this bug is fix. As it sta... Matthew Hanson
07:04 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...
Although I would try track this one down if I could, I have neither means to nor experience in Windows development. T... Nicklas Larsson
04:57 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...
Nicklas Larsson wrote:
> Originally I could find the problem in xp and vista 32bit (didn't test on 64 bit). Now I tes...
Giovanni Manghi
03:36 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...
Originally I could find the problem in xp and vista 32bit (didn't test on 64 bit). Now I tested only on xp again with... Nicklas Larsson
03:20 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...
Nicklas Larsson wrote:
> I can now confirm that the described problem occurs using release version 2.6.1 (on xp/32) t...
Giovanni Manghi
03:09 AM Bug report #10141: Setting data defined properties "Pen width" and "Dash pattern" causes freeze o...
I can now confirm that the described problem occurs using release version 2.6.1 (on xp/32) too. Nicklas Larsson
06:31 AM Bug report #11784 (Closed): Measure Line behaviour when "On the fly" enabled
Measure Line fails to locate points to measure from if "on the fly" transformations are enabled under Project Proper... Andrew Mercer
05:20 AM Bug report #11775: Crash after simple zooming and panning map
Giovanni Manghi wrote:
> Alexander Novoselov wrote:
> > After disabling parallel rendering - while not crashing!
>
>...
Alexander Novoselov
04:58 AM Bug report #11775: Crash after simple zooming and panning map
Alexander Novoselov wrote:
> After disabling parallel rendering - while not crashing!
no crash after disabling paral...
Giovanni Manghi
03:37 AM Bug report #11775: Crash after simple zooming and panning map
After disabling parallel rendering - while not crashing! Alexander Novoselov
03:27 AM Bug report #11775: Crash after simple zooming and panning map
No a decrease from 8 to 4 fall happened. Now disable the parallel rendering. Waiting for the fall. Alexander Novoselov
03:24 AM Bug report #11775: Crash after simple zooming and panning map
Alexander Novoselov wrote:
> CPU - i7 8 core (hypertrending)
> increase to 4 - crash
>
>
> turn off at all, is exp...
Giovanni Manghi
02:53 AM Bug report #11775: Crash after simple zooming and panning map
CPU - i7 8 core (hypertrending)
increase to 4 - crash...
Alexander Novoselov
01:12 AM Bug report #11775: Crash after simple zooming and panning map
Alexander Novoselov wrote:
> Uses a complex map of 18 layers. All layers postgis. Each layer uses filters. Many symbo...
Giovanni Manghi
04:55 AM Bug report #11782 (Closed): To change the coordinate system of the project after you add any plug...
Jarost Dudek wrote:
> When I add any layer from the OpenLayers plugin
that is how the plugin works.
Giovanni Manghi
04:55 AM Bug report #11782 (Closed): To change the coordinate system of the project after you add any plug...
Jarost Dudek wrote:
> When I add any layer from the OpenLayers plugin
that is how the plugin works.
Giovanni Manghi
04:08 AM Bug report #11782: To change the coordinate system of the project after you add any plugins from ...
When I add any layer from the OpenLayers plugin Jarost Dudek
03:22 AM Bug report #11782 (Feedback): To change the coordinate system of the project after you add any pl...
do you mean that it happens when you install a plugin, or by any chance do you mean when you add a layer (google, bin... Giovanni Manghi
03:00 AM Bug report #11782 (Closed): To change the coordinate system of the project after you add any plug...
When I add any of the plug-ins from the Internet, it automatically changes the coordinate system of the project on th... Jarost Dudek
02:26 AM Feature request #11781 (Closed): Processing - Add missing input parameters (e.g. CRS or folder) t...
Currently, scripts support more parameters than the modeler does (see doc http://docs.qgis.org/testing/en/docs/user_m... Anita Graser
02:08 AM Bug report #11760: QGIS Debian upgrade throws an error
Another workaround to avoid complete uninstall/reinstall:
sudo aptitude purge libqgis-customwidgets2.6.0
- apply sol...
Axel Schaefer
01:23 AM Bug report #11779 (Feedback): number of spatial objects don't update
where does this happen? in the "show feature count" option? else? Giovanni Manghi
01:23 AM Bug report #11779 (Feedback): number of spatial objects don't update
where does this happen? in the "show feature count" option? else? Giovanni Manghi

2014-12-02

09:37 PM Bug report #11775: Crash after simple zooming and panning map
Uses a complex map of 18 layers. All layers postgis. Each layer uses filters. Many symbols.
Fall is irregular, but c...
Alexander Novoselov
12:12 PM Bug report #11775 (Feedback): Crash after simple zooming and panning map
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
12:12 PM Bug report #11775 (Feedback): Crash after simple zooming and panning map
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
12:12 PM Bug report #11775 (Feedback): Crash after simple zooming and panning map
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
08:38 PM Bug report #11049: Wrong properties statistics and style minimum and maximum for grids
Still the same issue in master. Any chance to get this updated? It has obviously to do something with wrong handling ... Miroslav Umlauf
06:15 PM Feature request #8845: PDF output types & placement.
It would be nice to see this support happen, but if anyone else has this placement issue, I have improved my process ... James Harvey
12:26 PM Bug report #11777: PostGIS: 0 is wrote instead of "null"
confirmed here as a regression. Giovanni Manghi
12:26 PM Bug report #11777: PostGIS: 0 is wrote instead of "null"
confirmed here as a regression. Giovanni Manghi
12:26 PM Bug report #11777: PostGIS: 0 is wrote instead of "null"
confirmed here as a regression. Giovanni Manghi
12:26 PM Bug report #11777: PostGIS: 0 is wrote instead of "null"
confirmed here as a regression. Giovanni Manghi
12:26 PM Bug report #11777: PostGIS: 0 is wrote instead of "null"
confirmed here as a regression. Giovanni Manghi
12:12 PM Bug report #11776 (Feedback): Crash after delete single line
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
12:12 PM Bug report #11776 (Feedback): Crash after delete single line
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
12:12 PM Bug report #11776 (Feedback): Crash after delete single line
any layer type? it happens in all projects? or just some? Please attach sample data.
the same questions apply for #1...
Giovanni Manghi
11:47 AM Bug report #11778 (Feedback): Multiple feature geometry
is this a QGIS issue or a ogr one, seems to me the latter. Giovanni Manghi
07:28 AM Bug report #11778 (Closed): Multiple feature geometry
GML files allows data producer to include more geometries within one feature (e.g. polygon of parcel and reference po... Michal Med
09:14 AM Feature request #11780: QGIS and UHD (4K) monitors
Can't make the fonts smaller because they are default and very small allready.. Henning Rekvik
09:10 AM Feature request #11780 (Closed): QGIS and UHD (4K) monitors
Some dialog windows looks bad and text are too big for textarea among other things. In attribute table the cell heigh... Henning Rekvik
08:42 AM Bug report #11779 (Closed): number of spatial objects don't update
If you make a query in order to filter your data then the number of spatial objects don't update correctly, only the ... ricardo pando
03:51 AM Bug report #11750 (Closed): Can't assign parent algorithms in Graphical Modeller due to Python error
Please open separate tickets for different issues.
Regarding your problem, it seems that you updated Processing only...
Alexander Bruy
01:49 AM Bug report #11181: scaling range for line widths not persistent
Thank you very much! Kai Borgolte

2014-12-01

12:39 AM Bug report #11750 (Reopened): Can't assign parent algorithms in Graphical Modeller due to Python ...
I reopened the ticket because another problem still occurs. Jouko Jarnefelt
12:14 AM Bug report #11719: Oracle Data Provider Multiline gap
Nicholas Latham wrote:
> Jürgen Fischer wrote:
> > Please provide a test case.
>
> How should I do this? I have foun...
Jürgen Fischer
12:10 AM Bug report #11716 (Closed): core dump on startup
Fixed in commit:4fde34a Radim Blazek
12:06 AM Bug report #11777 (Closed): PostGIS: 0 is wrote instead of "null"
Hi.
While working with QGIS 2.6 and Postgres/Postgis 9.3/2.1 on Ubuntu (or 9.1/1.5 on Windows) I found a bug.
I have ...
Seb Radzimski
 

Also available in: Atom