Activity
From 2014-08-23 to 2014-09-21
2014-09-21
-
11:51 PM Bug report #11194 (Closed): QGIS 2.4 crashes when adding >1 column in a PostGIS table
- Fixed in changeset commit:"35936084ff9c6ff912611bab471a3ddf20aa906b".
-
- Fixed in changeset commit:"35936084ff9c6ff912611bab471a3ddf20aa906b".
-
07:45 PM Bug report #11219: Couldn't load PyQGIS
- Thank you very much!
-
04:43 PM Bug report #11243 (Closed): Data corruption with feature simplification.
- QGIS can corrupt data badly during feature simplification. This is demonstrated by the attached files which render a...
-
12:14 PM Bug report #11242 (Closed): Unit settings not available on Ellipse Marker
-
- I managed to test with QGIS master exported again (Xubuntu 14.04, 64bit VM Box) and everything works fine.
You are r... -
09:12 AM Bug report #10747: Cannot copy/paste points features
- Me too! Copying a point from one layer to another should just work as it has for many releases. In my case they are b...
-
08:41 AM Bug report #11237: Shapefile polygon layer not showing certain polygons
- It had worked in a previous version of QGIS (2.2) but then stopped working when I upgraded. Apparently doing a "save ...
-
- It had worked in a previous version of QGIS (2.2) but then stopped working when I upgraded. Apparently doing a "save ...
2014-09-20
-
01:41 PM Bug report #11242: Unit settings not available on Ellipse Marker
- I'm fairly certain this is fixed in master. Are you able to test with a current snapshot and confirm?
-
- Every marker type has several options to set map units / screen units (mm) for e.g. line width, symbol height, offset...
-
01:07 PM Bug report #8332 (Reopened): QGIS uses comma as decimal separator for shapefile attribute data
- Same issue for me under Debian testing.
QGIS 2.4.0-Chugiak
Compiled against GDAL/OGR 1.10.1 Running against GDAL/OGR ... -
- Same issue for me under Debian testing.
QGIS 2.4.0-Chugiak
Compiled against GDAL/OGR 1.10.1 Running against GDAL/OGR ... -
12:58 PM Bug report #11237 (Feedback): Shapefile polygon layer not showing certain polygons
- Please attach sample data to allow try replicate the issue.
Does it happens with *any* vector?
Is your layer topolog... -
- When I scroll around the map, the layer on my map that contains my lakes displays certain polygons from that layer bu...
-
04:40 AM Bug report #11219 (Closed): Couldn't load PyQGIS
-
- In current master child features are not shown in the browser when the browser is in the form display mode. The featu...
-
03:15 AM Bug report #11235 (Closed): Postgis integer field with null values
- When I'm editing PostGIS tables (they are actually related tables) in QGIS, if I leave an 'integer' field of this tab...
-
- Nyall Dawson wrote:
> Adding a column also results in a similar crash.
Yes, this was already reported and happens b...
2014-09-19
-
-
- Closed due to lack of feedback
-
- Closed due to lack of feedback
-
- This is all implemented in current master - holding ctrl while zooming using the mouse wheel results in a finer zoom....
-
- This is all implemented in current master - holding ctrl while zooming using the mouse wheel results in a finer zoom....
-
-
- Closed due to lack of feedback - please reopen with a sample project if you still experience this issue.
-
- Closed due to lack of feedback - please reopen with a sample project if you still experience this issue.
-
-
- Adding a column also results in a similar crash.
-
11:56 AM Bug report #11229: Crash when deleting a column from attribute table
- same thing under Win
-
03:39 AM Bug report #11229 (Closed): Crash when deleting a column from attribute table
- When I try to delete attribute from layer attribute table QGIS crashes. Tested in latest master (11be64d) with shapef...
-
04:28 PM Feature request #11234 (Closed): Optionally embed SVG symbols into style definition
- When exporting styles using the Style Manager, the user should be able to embed the source of any SVG markers directl...
-
- "Save as..." functionality for rasters is broken in master. To reproduce load any raster layer and try to save it via...
-
- Confirmed. After loading there are no visible features on map, but map extent is correct, attribute table is correct ...
-
- Confirmed. After loading there are no visible features on map, but map extent is correct, attribute table is correct ...
-
- Confirmed. After loading there are no visible features on map, but map extent is correct, attribute table is correct ...
-
- Confirmed. After loading there are no visible features on map, but map extent is correct, attribute table is correct ...
-
- Fixed in changeset commit:"cc307578eb83bd454b389d0e5f8c3e68021cc4fe".
-
06:17 AM Bug report #11215: "Random points inside polygons (variable)" progress error halts algorithm
- Alexander Bruy wrote:
> Please provide sample dataset, I can't reproduce this with my test data.
I've attached an ex... -
- On a spatialite layer, creating a new field with the field calculator and the expression "rand( 100000, 5000000 )" gi...
-
- another use case: labelling property boundaries with bearing above the line and distance below the line. At the momen...
-
- Olá Bruno,
o tickets no QGIS bug tracker são para serem criados em Ingles.
O erro que está a relatar é de um plugin... -
- Olá Bruno,
o tickets no QGIS bug tracker são para serem criados em Ingles.
O erro que está a relatar é de um plugin... -
02:15 AM Bug report #11207: attributeEditorElements behavior in pyqgis
- I solved the problem in this way. Can you explain me what happen ? I let the status as feedback, just if you want to ...
2014-09-18
-
01:58 AM Bug report #11228 (Closed): resolution problem with the rule rendering dialog window
- The upper part of the rule-based dialog window doesn't fit in the screen: it is just to big and the only chance is to...
-
- Warning: uint DBusMenuExporterDBus::GetLayout(int, int, const QStringList&, DBusMenuLayoutItem&): Condition failed: m...
-
- Ok, i've checked and it's working well in the console. However, it's crashing when using this code in a plugin. I'm n...
-
- I have executed your code in the python console and opened the form by adding a new feature.
What system are you runn... -
- Please provide sample dataset, I can't reproduce this with my test data.
-
- Please provide sample dataset, I can't reproduce this with my test data.
-
- Please provide sample dataset, I can't reproduce this with my test data.
-
- Perhaps a "better" solution is:
@total = (pointCount / 100.0) * 100@
This appears to avoid the issue with dividing ... -
12:12 AM Bug report #9612: Web view doesn't work with specific URL in feature form
- Apparently it stil does not work, both on Debian and on Windows
-
02:42 PM Bug report #10746: Buzzer sound when the map is refreshing
- I had the same problem at my job but I thought at the time that it was a hardware problem (Old computer with windows ...
-
11:34 AM Bug report #11227: projections in 2.4.0
- It worked!! .... for a second. Then I zoomed in and got the rectangles again.
-
- Having trouble projecting into Robinson, or really any projection. My CRS on the fly is enabled. Have tried setting p...
-
08:35 AM Bug report #11226 (Closed): Removing a Join from layer properties is completed even when user can...
- *Problem Description:*
Removing a Join from layer properties is completed even when user cancels the property window.... -
06:41 AM Bug report #11225 (Closed): Processing tools don't work without opening the configuration
- Scripts, GRASS and R scripts don't run after QGIS is first opened. Scripts give an error when run:
@Algorithm Regula... -
- Closed due to lack of feedback.
Please re-open this issue with the information requested by Giovanni. -
- seems to be the case under both Win and Linux
-
- It works fine in 2.2, but in latest master after opening VRT vector features don't show up.
Table opens fine, ogr2og... -
02:32 AM Feature request #11222 (Open): make it possible to deactivate tips popup by command line option
- since it might be of use to see the tips when starting in interactive mode,
but undesired if QGIS is started in batch...
2014-09-17
-
02:21 PM Feature request #11221 (Open): Marker offset for arrow in Composer
- At present, a custom SVG for an arrow is placed by Composer with no ability to offset the marker (see attachment for ...
-
- If I add a custom SVG marker to my composer there is no way to remove it again without permanently moving to the defa...
-
12:44 PM Bug report #8518: OWS tab - Abstract field of service capabilities adds additional new lines at p...
- Seems to be a Windows issue. Maybe related to #8267?
I often edit my projects on Windows and deploy on Linux. -
- This bug is just got back, I cannot use windows version anymore.
It seems it started with 2.5.0-77
Below is the mes... -
08:18 AM Bug report #4051: Cannot display SpatiaLite views based on tables with spatial index
- I am using QGIS 2.4.0. If I use the info tool, I can see the attributes; if I use the DB Manager, I can see the attri...
-
08:06 AM Bug report #11218 (Closed): Erro de execução do código Python Traceback
- Olá,
Eu uso o QGis para manipular dados SRTM na empresa onde trabalho e ao me deparar com a necessidade de colocar
o... -
- When i apply this code on one layer, my qgis crash. Not when it's applied, but the when i try to open the properties,...
-
- This works perfectly fine here on latest master (opened the feature form by adding a new feature).
Can you share the... -
07:00 AM Bug report #11217 (Closed): crash / bad alloc when loading raster with only nodata values
- When loading a geotiff with only nodata values (e.g. the nodata value is set to 0, and the tif is full of 0's), qgis ...
-
- Fixed in changeset commit:"2d24b322e949a326b114535a9ae3ab0548ef23a2".
-
- Implemented in master.
-
- Implemented in master.
-
- Yes - if I set visibility off for all except one layer, QGIS does not crash. If I then change visibility state to vis...
-
04:56 AM Bug report #11191: Start of QGIS Desktop delayed (1–2 min.)
- No, there are no network drives defined at all.
The startup delay is still present after uninstalling QGIS completely... -
- Random guess: Are there any unavailable network drives?
-
- Fixed in changeset commit:"e6a259d1806b756cb2a9d91d6c5546ce6d04e710".
-
- Fixed in changeset commit:"e6a259d1806b756cb2a9d91d6c5546ce6d04e710".
2014-09-16
-
01:18 AM Bug report #11141: Parallel multi-core rendering crashes QGIS
- Hi Andreas,
my workaround is to have one PostGIS layer (with one feature) visible in the project so the connection ge... -
- Hi,
I have very similar problems like Bernhard. The difference is that in my case the crash already happens at the e... -
05:45 PM Bug report #11216 (Closed): License issue - removal of GDAL MIT/X copyright notice from third par...
- The QGIS "python/plugins/processing/tools/raster.py" module contains the invertGeoTransform function which was ported...
-
- Shapefile with ~3000 rows contains field column containing the number of samples per polygon: "SAMP300" (integer). Al...
-
12:48 PM Bug report #11188 (Closed): ImportError: No module named sip
- Well, I reinstalled Ubuntu trusty entirely and used the official repositories from the QGis website again... and it w...
-
12:31 PM Bug report #11214 (Closed): Symlinks added as layer sources: QGIS unexpectedly rewrites source lo...
- Behavior:
A symlink to a source file (such as a raster image) can easily be added as a layer to a QGIS project. In l... -
- Crash dump shared via Dropbox since it's too large to attach:
https://www.dropbox.com/s/j616tf17wqfxlti/qgis-20140916... -
- I just experienced a crash while saving a map. I opened the map, removed a few layers, and then saved resulting in th...
-
08:16 AM Bug report #11212 (Closed): Processing model - v.db.select
- Grass module v.db.select doesn't work if inserted in a model, warning about a missing or invalid parameter value even...
-
03:48 AM Bug report #11211: Save QGIS project on VPN connection is very slow
- Using Windows 8.1 and QGIS 2.4. VPN issue also a problem in previous version of Windows and QGIS.
-
- Saving a project on a VPN connection is very slow. A 0.5 MB project file can take up to 1 minute to save. The same qg...
2014-09-15
-
- The function layer.listStylesInDatabase returns empty string lists in pyqgis. I have my style in database (checked), ...
-
- Hi,
This bug is back! Now in version 2.5.0-77 or 78... -
08:08 PM Bug report #11209 (Closed): Bad Allocation when opening properties of a VRT file created with the...
- When creating a hillshade with a virtual raster output, based upon an existing virtual raster, the process completed ...
-
01:03 PM Bug report #11208 (Closed): QGIS 2.4 cannot save MSSQL spatial layer
- Recently I upgraded to QGis 2.4 and noticed that it cannot save edits that were done to MSSQL spatial data layer. I d...
-
10:47 AM Bug report #11197: Poor (or non) performance when moving features
- Any thoughts on this issue?
-
10:22 AM Feature request #9890: Show "Nearest neighbor analysis" in results viewer when running from modeller
- Thanks! It would be nice if the results would be visible in the results viewer as well, in case no dialog is displayed.
-
- In modeler this algorithm produces several numeric outputs, you can use this values as inputs in another algs. Of cou...
-
- Just checked and seems almost all algorithms now available via Processing, only few missed. But there is a question: ...
-
- Hi
Something similar is happening to me, with shapefiles. The steps to reproduce:
1. Load or create a shapefile;
2.... -
- Following code make the programm doesn't make anything and crash the programm when attributeEditorElements is used (e...
-
- Also affected by this issue.
Seems like QGIS uses a system default encoding for all Processing toolbox outputs. So fo... -
- Please submit bug to plugin bugtracker http://github.com/volaya/qgis-ol3/issues
-
- Please submit bug to plugin bugtracker http://github.com/volaya/qgis-ol3/issues
-
- Please submit bug to plugin bugtracker http://github.com/volaya/qgis-ol3/issues
-
06:23 AM Bug report #10745 (Reopened): "Dizzy" new feature in QGIS 2.4 does not function
- Unless someone uploads a youtube video of getting dizzy while staring at canvas, the ticket should remain open.
-
06:19 AM Bug report #10745: "Dizzy" new feature in QGIS 2.4 does not function
- @Alex I think you missed the joke ;)
-
- Works as expected in master
-
- Please submit bug to plugin bugtracker http://github.com/volaya/qgis-ol3/issues
-
- Please submit bug to plugin bugtracker http://github.com/volaya/qgis-ol3/issues
-
- Fixed in master. Please reopen if necessary
-
- Fixed in master. Please reopen if necessary
-
- Second pull-request applied too. Please reopen if necessary.
-
- Second pull-request applied too. Please reopen if necessary.
-
- Both pull requests applied.
-
- Both pull requests applied.
-
- Bug is not in script itself, but in underlying mmqgisx algorithm
-
- Bug is not in script itself, but in underlying mmqgisx algorithm
-
04:58 AM Bug report #11206 (Closed): QGIS Server crashes on GetLegendGraphic and GetFeatureInfo requests w...
- When I send GetLegendGraphic or GetFeatureInfo requests I get a 500 internal server error.
Here is my error_log for a... -
- No you didn't write that code. I did, and it was committed to the metageta repo back in March 2010 - https://code.goo...
2014-09-14
-
- Fixed in changeset commit:"8502d11f11605225cad8b0eedba2ce0eff14ee75".
-
12:22 PM Bug report #10873: Select by location: does not work as expected
- That seems to be a design error in the algorithm. These selection algs should not use only the selction, but the whol...
-
- This is because Processing considers existing selection in input layers. If there is a selection, only this selected ...
-
-
- Per this GISSE question - http://gis.stackexchange.com/a/113784/2856 - there appears to be a small bug in Extract_ras...
-
- This is completely unfounded charge. This my own code and it was published much earlier than metageta files. So I can...
-
- This is completely unfounded charge. This my own code and it was published much earlier than metageta files. So I can...
-
- Alex, you added this, can you confirm?
-
- In the QGIS "python/plugins/processing/tools/raster.py" module, the following functions appear to be taken with minor...
-
04:27 AM Bug report #11200 (Closed): Symbology changes of a layer aren't reflected in overview panel
- Fixed in changeset commit:"8d0424188cfe178148bb035d58a1ed9a06d4c94f".
-
- Fixed in GDAL 1.11.1 / trunk (will be 2.0)
-
- Fixed in GDAL 1.11.1 / trunk (will be 2.0)
-
- Duplicates #9859
-
- Duplicates #9859
-
- I would suggest adding functionality to check/uncheck multiple layers to the newly added visibility button within lay...
-
- Martin any ideas on this one?
-
- Please provide sample data
2014-09-13
-
01:41 AM Bug report #10767: Simplified rendering causing boxes to appear instead
- Hi Martin, the problem is there. The simplification logic has not changed from this PR was implemented.
!Issue10767_... -
- Hmm... I have just tested with latest master and I cannot replicate the problem anymore (with the given shapefile). W...
-
- Fixed in changeset commit:"e52c1232a8e6c844a9aa5893236cb37672e7679e".
-
- Fixed in changeset commit:"e52c1232a8e6c844a9aa5893236cb37672e7679e".
-
- Fixed in changeset commit:"e52c1232a8e6c844a9aa5893236cb37672e7679e".
-
03:02 PM Bug report #11202: Invalid SLD generated
- This seems to be related to #10076 as both seem to report the incorrect wrapping of a literal expression in a filter.
-
- see user report at http://gis.stackexchange.com/questions/113723/qgis-sld-in-geoserver - once the user copy and paste...
-
10:54 AM Bug report #11201 (Closed): New Shapefile and attribute table: QGIS allows illegal characters in ...
- Hi all,
Some time ago I had to create a new shapefile with alot of attributes. I used comma (,), full stop (.) and s...
2014-09-12
-
11:58 PM Bug report #11200 (Closed): Symbology changes of a layer aren't reflected in overview panel
- Symbology changes of a layer that is shown in the overview aren't reflected in the overview panel (i.e. old style is ...
-
- The on-the-fly reprojection fails to automatically activate itself when a project has layers with multiple CRS as a r...
-
- Text (and other types of) annotations are not rendered when saving the map canvas as an image through QGIS' Project -...
-
06:57 PM Bug report #4087: Split Features tool: lines are split also at every self-intersection
- I am setting up Mac OS X 10.9.4 to do QGIS development. I could use a tip or two on where to look to try fixing this ...
-
- QGIS 2.4 and master exhibit extremely poor performance (or total failure) when moving a moderate number of features i...
-
- * please use meaningful subjects
* in the description you *must* write about what operation you are doing and tools ... -
08:14 AM Bug report #11195: Minidump
- It looks like that it is not possible to attache the dump. The file is about 27 MB
-
- Hello,
QGIS wrote following minidump:
Started logging at Tue Sep 02 2014 11:20:53
ERROR|Tue Sep 02 2014 11:20:54|Cou... -
08:20 AM Feature request #3121: print composer: allow generating the legend classes of only the visibile f...
- +1 From myself, would love to see this feature. Especially useful with all the other great updates to the print compo...
-
- From Juergen:
Filtered shape file layers are not editable. But there's currently no way for a OGR provider to propa... -
- Should be a regression.
Steps:
* open a postgis table
* toggle editing
* open field calculator
* create a new field... -
03:06 AM Feature request #11193 (Closed): allow CRS selection for map frame in composer
- At this moment it is not possible to have map composer with two (or more) map frames with different CRS (coordinate r...
-
03:03 AM Feature request #11149 (Closed): Checkbox to active/deactivate all plugins
- Done. It's why I wasn't sure, though people should be able to close tickets they opened :)
-
02:54 AM Feature request #11149: Checkbox to active/deactivate all plugins
- Please close it for me. I don't see any button to change the status in my update box.
Perhaps i don't have permissio... -
- If you agree with me, yes please, you can close it. I assume, you're able (as the ticket author) to change the Status...
2014-09-11
-
- The problem most likely is introduced by the fact, that each feature is deleted with a separate call to @QgsVectorLay...
-
- Tens of minutes for a PostGIS table with 200k records, with qgis taking 100% of CPU. The issue was apparently fixed s...
-
- When starting QGIS Desktop (2.4.0), there is a delay in loading the GUI for 1 to 2 minutes. The splash screen shows "...
-
- Fixed in changeset commit:"b1a2bef1fc9e1b2b323855aa252338d0ed2912f9".
-
- Seems to be fixed.
If there is a reason to reopen: Please state which entries are missing! -
01:07 PM Bug report #11187: 2.4 install on Ubuntu 14.04. Vector menu missing many items.
- Installing via ppa:ubuntugis/ubuntugis-unstable seems to fix problem...
-
- Vector menu no longer had geoprocessing tools. Raster menu also seems to be missing elements.
Has there been a GUI ... -
- +1 with a side of heck yeah for something like this :)
-
- No objections from me to add shortcuts :-)
Regarding implementation - groups are currently alphabetically ordered, s... -
08:06 PM Feature request #11190: Remember last selected format type for WMS/WMT-S for identify results
- Note this should be a feature rather than a bug.
-
- Would be really good if the identify results remembered the last selected "format" type (i.e feature/HTML) for WMS/WM...
-
- See also http://lists.osgeo.org/pipermail/qgis-developer/2014-September/034609.html ff
-
- Unfortunately this is a limitation with the OGR driver. Once you set a filter on a layer we loose edit ability.
-
- Unfortunately this is a limitation with the OGR driver. Once you set a filter on a layer we loose edit ability.
-
03:43 PM Bug report #11189 (Closed): No shp edit mode when query used?
- I am using a feature subset query that i can't edit via the query builder. I am using rule based layers as well, but ...
-
- Hi Borys,
thank you for your feedback.
And i understand perfectly your point of view.
I'm giving first steps in P... -
- Hi all,
I'm running QGIS 2.4.0 on Ubuntu trusty but the Python support is missing due to the following error:
Trace... -
08:05 AM Feature request #10731: html formatted text boxes do not create links in pdf outputs
- Hi,
it seems there was a bug in QT 4.7 , solved in 4.8.. I guess we just have to wire that feature:
see [[http://sta... -
- Paolo Cavallini wrote:
> d d please be kind with people who work hard everyday to bring you the best possible GIS, fr... -
03:55 AM Feature request #10036: lock scale and extents in composer
- This should really make it into the next release. Can somebody give it a "log hanging fruit" tag?
-
02:01 AM Bug report #11184 (Closed): When storing only the username of a protected WMS connection, then QG...
- *New description:*
When storing only the username of a protected WMS connection, then QGIS asks for the password on ...
2014-09-10
-
01:11 AM Bug report #11181: scaling range for line widths not persistent
- I think I narrowed the problem to the source file
[[https://github.com/qgis/QGIS/blob/master/src/core/symbology-ng/qg... -
- Same issue with QGIS weekly (2.5.0-Master code revision commit:4291337).
-
- I style a line layer, giving the line width in map units, and defining min and/or max scales (button near the words "...
-
- d d please be kind with people who work hard everyday to bring you the best possible GIS, free for you to use
-
- Fixed in changeset commit:"890f921e06267d7bf2c0029bd0dedf014e5b5a49".
-
- Jürgen Fischer wrote:
> d d wrote:
> > This is clearly a bug and should be a high priority update for a future releas... -
- d d wrote:
> This is clearly a bug and should be a high priority update for a future release (e.g., 2.6). I wasted se... -
- This is clearly a bug and should be a high priority update for a future release (e.g., 2.6). I wasted several hours o...
-
- The new layer groups functionality is great - it's really handy for quickly comparing data. Something that would real...
-
07:16 PM Feature request #11179: Allow to define a tolerance for point selection
- Currently, selection uses a hardcoded 10*10 pixel square to select lines and points. It would be quite easy to change...
-
07:20 AM Feature request #11179: Allow to define a tolerance for point selection
- What about big symbols for a point ? You may want to select it by clicking on the symbol, not on their centres. The b...
-
- I'm not sure that would be a very good solution as you would have to change it all the time depending on the project....
-
- When using the single-click selection tool to select a point of a points layer, the symbol representing the point mus...
-
- Do you mean activate and deactivate all plugins INITIALLY ACTIVE I hope? :) I don't see any use in enabling all INSTA...
-
- Hi Mathias, sorry for my delay in the answer.
I think the purpose of --noplugins don't load the plugins and you need... -
01:03 PM Bug report #11178 (Closed): WPS client not working
- the ticket was moved to own bug tracker: #11180
-
- the ticket was moved to own bug tracker: #11180
-
04:50 AM Bug report #11178 (Closed): WPS client not working
- I'm looking forward this problem between Qgis and WPS, see for more detail here:
http://osgeo-org.1560.x6.nabble.com/... -
- d d wrote:
> It looks like this was discussed previously, but never resolved: #5153
That's the intended behaviour. ... -
- d d wrote:
> It looks like this was discussed previously, but never resolved: #5153
That's the intended behaviour. ... -
- It looks like this was discussed previously, but never resolved: #5153
-
- Affected function: under Layer Properties --> Style --> Graduated --> Expression
Issue: writing an expression that ... -
04:43 AM Bug report #11177 (Closed): hot keys configuration problem
- 1. In previous versions of QGIS it was OK, but in ver. 2.4 I can't pernament change hot keys profile :(
I have prepar... -
02:16 AM Bug report #9606 (Closed): QWC fails silently if project doesn't have "service capabilities" checked
- Ok, I've digged into the code and I can conclude that this problem is not related to the server: it's more like a QWC...
-
- Ok, I've digged into the code and I can conclude that this problem is not related to the server: it's more like a QWC...
2014-09-09
-
- In my case it was some different plugin, unfortunately I am not able to track which one - I had too many of them and ...
-
02:01 PM Bug report #10756: Minidump on closing QGIS 2.4
- Closed?
The same error here. LecoS plugin is not installed. Procedure: Open QGIS, disable all plugins. Close QGIS. Ge... -
12:57 AM Bug report #11176 (Closed): Memory layer saver fails in 2.5.0-Master
- Moved to plugin tracker: https://github.com/ccrook/QGIS-MemoryLayerSaver-Plugin/issues/2
-
- Moved to plugin tracker: https://github.com/ccrook/QGIS-MemoryLayerSaver-Plugin/issues/2
-
- An error has occured while executing Python code:
Traceback (most recent call last):
File "/home/strk/.qgis2/pyth... -
- I just got stroke by this once again, using master.
It would have been much better if I was warned at "save" time, ra... -
- Reading the docs http://docs.qgis.org/2.0/en/docs/user_manual/working_with_ogc/ogc_server_support.html it is not clea...
-
12:03 AM Bug report #9142: "format_number" function error in label expression
- can you please provide some test data, and the steps we have to do to see this problem?
-
11:50 AM Bug report #9142 (Reopened): "format_number" function error in label expression
- It still is problematic to me. It runs fine in the field calculator, also when I save it, but when I hit the toggle e...
-
- It still is problematic to me. It runs fine in the field calculator, also when I save it, but when I hit the toggle e...
-
- It seems it's still an issue in master. Can you confirm that?
-
- I'm not sure if this is a problem with QString only or if this affects other types too. It seems that that string is ...
-
- In the end I was able to replicate when reloading a previously loaded project - fixed now.
-
10:17 PM Bug report #11169 (Closed): toggling symbol visibility does not trigger map refresh
- Hmmm, sorry for this. I cannot replicate either. Sorry for the noise. I hesitated at doing a video at first, I should...
-
- I cannot replicate - if I add a layer and set its symbology to rule-based and check/uncheck a rulue, the map is refre...
-
- toggling a symbol visiblity (of a rule based symbology) in the legend does not trigger the map refresh so it doesn't ...
-
- Fixed in changeset commit:"95f4a30e7bbe35959b210d824d24648a51d7b17e".
-
- might require a take 3, sorry...
I am still having trouble. I suspect this is related to rule based symbols visibili... -
- Fixed in changeset commit:"7fe45db70c7e5d583703b9e022e9c666237305a5".
-
11:15 AM Bug report #11174 (Rejected): Qgis processing toolbox is breaking encoding of output shapefile
- I' m using "Distance to nearest hub" in Qgis processing toolbox. The input layers have utf-8 data source encoding and...
-
10:46 AM Bug report #11173 (Rejected): OpenLayers3 not showing nothing when Style is Rule-Based
- I have around 1000 different values, so i decided to use a Rule-Based approach
When i save the OL3 map, i don`t see ... -
- When i try and use this formula in the Labels of one vector field, and i try to save with OL3, i get a crash and a mi...
-
- Using Qgis 2.4
When i open in preview, in qgis, it loads the basemap
When i open in firefox, it does not
In Google... -
- ...
-
- Martin Dobias wrote:
> Thanks for further testing.
Thanks for your patience
>
> Will you still get a crash if you r... -
- Fixed in changeset commit:"071a5ec0c528f886bc7875c43c9e2260191a432c".
-
- Oh... what a coincidence :-)
Sorry - I am sometimes a bit loosing track of the pull requests... I will try to have a ... -
- Hi Martin,
The following pull request solves the issue here as well as it integrates it with editing mode/undo (wait... -
- After having added an expression field to a vector layer, I am unable to remove it. Clicking "delete column" crashes ...
-
- I cannot reproduce the issue with current master.
Can you please confirm that the current master still has the proble... -
- I cannot reproduce the issue with current master.
Can you please confirm that the current master still has the proble... -
- I cannot reproduce on current master.
Can you please provide a sample project and the query string that fails?
-
- I cannot reproduce on current master.
Can you please provide a sample project and the query string that fails?
-
- What is the use-case?
There is also the option --noplugins. -
02:36 AM Bug report #11145: Large format export/printing (with transparencies and blending modes) crashes ...
- My machine at work is Windows 32bit. Is seems I have to switch. On my Mac (10.9, 64bit) the file export works just fi...
2014-09-08
-
01:07 AM Bug report #11163: Saving changed edit widgets not possible
- Thanks for closing. I of course did search for duplicates respective solutions for the problem but didn't find the ti...
-
- Closed as duplicate of #11123
-
- Closed as duplicate of #11123
-
- After doing changes in edit widgets of a layer (.shp) an saving eather with "save style" (.qml) or "save as default" ...
-
- I think that the problem can be solved (as Juergen suggested) by pointing the server to a copy of a working QGIS2.ini...
-
- I think that the problem can be solved (as Juergen suggested) by pointing the server to a copy of a working QGIS2.ini...
-
- Thanks for further testing.
Will you still get a crash if you reduce the group to 5-10 layers? If yes, would replaci... -
- Jürgen Fischer wrote:
>
> Can you really reproduce it reliably? I was unable to reproduce this kind of crashes so f... -
- Bernhard Ströbl wrote:
> # the crash is reproducible:
> * it only happens when setting the group to visible immediate... -
- Hi Martin,
I tested a lot this morning, results:
# the modulo operator is not the cause of the crashes
# the rule-bas... -
05:05 AM Bug report #10907: Mac OSX: unable to save on a network samba volume
- I have tried to modified in all possible ways the file permissions in the Win machine, but the problem still persists...
-
- Fixed in changeset commit:"c04127eccd2b6d32b66dff4222eedab2756e0386".
-
- Hi Ross,
ARM fixes are highly welcome as they are required for android as well. The pull request looks fine for me, ... -
- Closing as duplicate of #9229.
Please identify the responsible plugin as described in #9229.
If it is not an issue ...
2014-09-07
-
01:26 AM Feature request #11159 (Closed): Save Ogr VRT files from vector layers
- it would be useful to have a function to save a VRT file containing the QGIS layers in <OGRVRTDataSource> format defi...
-
- Old visibility groups are still not checked after loading them.
Hence I can't remove them. -
- Actually, in the Browser panel *.qgs files are not visible.
Instead, it would be very useful to be able to choose ... -
- Right now, the background color of the overview panel's canvas is set to the default OS window background color (on w...
2014-09-06
-
- When label's placement is set to "around point" / "around cendroid", the visual quickly degrades for multiline labels...
-
- Fixed in changeset commit:"429133738ffd073360909b1ffa369b08ba06feb4".
-
- Hi, i'm wondering if it's possible to add a type of checkbox to activate and deactivate all plugins.
In this way we ...
2014-09-05
-
05:19 PM Bug report #9526: File based layer edits and posts taking extremely long time
- The problem plugin seems to be the Rectangles Ovals plugin. I just updated to 2.4.0 and have just reinstalled the ver...
-
- Are you using a 64bit build? If not, I'd suggest you make the switch - 64 bit builds have much better support for lar...
-
12:20 PM Bug report #11147: Saving table more and more slowly
- Same behavior reported in ticket #9229
Gerhard
-
07:51 AM Bug report #11147 (Closed): Saving table more and more slowly
- When i open the attribute table, modify it and save it, it's ok at the beginning but with time it's spend more and mo...
-
12:02 PM Feature request #11148: Supporting arm architectures in Debian - FTBFS on armel and armhf due to ...
- No problems!
https://github.com/qgis/QGIS/pull/1577 -
- Could you please rework this as a pull req? This will make it much more visible, and easier to merge.
Thanks a lot. -
- The Debian GIS team are working to support the various ARM architectures in Debian. Earlier in the year, a pull reque...
-
- So, do I understand correctly that in your case the crash happens only when modulo operator is used in rule-based ren...
-
- I just realized that the position of the input lines for min/max scale was exchanged since 2.2, that's while it looke...
-
- ok I fixed the layer in question by duplicating it and using the modulo in the filter instead of the rule-based rende...
-
- Hi Martin,
Martin Dobias wrote:
> In order to track down the likely source of the problem, I would need some more inf... -
- In order to track down the likely source of the problem, I would need some more information regarding what kind of fu...
-
-
- the visibility on the symbol level (in a rule base renderer) in not saved properly.
see http://youtu.be/rDRXpd9DR04 -
- Fixed in changeset commit:"854730bb59caa2d4267aa4addd236d120c790981".
2014-09-04
-
- I have a project I need to export as an DIN A0 map. The map contains shapeburst fills, transparencies and objects wit...
-
- Fixed in changeset commit:"fd5669cf8372916fb9be14988a4f35a22200363f".
-
- if you enable a group, of which some layers were previously deleted, it is not marked as in use (group is not checked...
-
- Please ask on the offending plugin's issue tracker / contact the author.
Two hints that may work:
* Create a matpl... -
- Please ask on the offending plugin's issue tracker / contact the author.
Two hints that may work:
* Create a matpl... -
03:23 AM Bug report #11133: QGIS crashes with segfault in libc.so
- Bingo! I switched between normal loading and --noplugins, uninstalling plugins until it worked. The culprit was the S...
-
01:26 PM Bug report #11142 (Closed): Adding three shapefile layers when I add just one for QGIS 2.4.0
- Hey,
When I add a shapefile vector layer to my map, it adds three copies instead of just one. Why is that? I'm using... -
- seems the minidump file was to large to upload. I can provide it if someone needs it to analyze teh problem.
-
- We rolled out QGIS 2.4 recently and face regular crashes when setting a group containing many layers visible. All vec...
-
08:42 AM Bug report #10790: OpenStreetMap plugin only loads 32 bits numbers ID, then start with negative n...
- Confirmed here, with data recently added to the OSM database. The .osm file is correct, and when I look into the spat...
-
07:10 AM Feature request #11140 (Closed): Update attributes of a joined layer automatically
- Layer_A is joined with Layer_B.
If you change some attributes of Layer_B and save the edits, it would be ideal for t... -
05:18 AM Feature request #11139 (Closed): A show/hide option to quickly manage the symbology of a categori...
- Make a categorized symbology on a vector layer and let's say you have many resulting rows.
In the current master, it ... -
- Installing "python-qt4-dev" package fixed the build issue for me.
I guess cmake should complain about the missing dep... -
- Installing "python-qt4-dev" package fixed the build issue for me.
I guess cmake should complain about the missing dep... -
- I'm getting a build failure in the 2.2 branch:...
-
- Installing "python-qt4-dev" package fixed the build issue for me.
I guess cmake should complain about the missing dep... -
- Installing "python-qt4-dev" package fixed the build issue for me.
I guess cmake should complain about the missing dep... -
- I'm getting this error trying to build qgis from the master branch:
sip: Unable to find file "QtCore/QtCoremod.sip"
... -
- When adding an attribute table in the print composer, there are some options to symbolize how will appear the heading...
2014-09-03
-
- Qgis loads some Qt5 modules despite being compiled against Qt4.
Can you try to run it with --noplugins?
And specify... -
- When I launch QGIS, I get the splash screen, two python errors (for the plugins SelectTools and statist), then it cra...
-
12:01 AM Bug report #11135 (Closed): Zonal Statistics is calculating wrong mean values
- Hello,
the Zonal Statistics tool doesn't work correctly (wrong MEAN value). Here is a link to the Forum-question: [[... -
02:39 PM Bug report #11134 (Closed): QGIS confuse EPSG:3857 with EPSG:54004
- After reprojecting a layer with @ogr2ogr@ to SRS *EPSG:3857*, QGIS think it's SRS is *EPSG:54004*.
To try, you can d... -
- Hi, I would raise it to high priority and not as a feature, but an issue. It used to work in 1.x and I miss it. Régis
-
02:11 AM Feature request #11130 (Closed): Support memory layer joins
- Hello,
in QGis 2.4, it seems to be impossible to join two memory layers together.
When I try to add a new join on th... -
- Fixed in changeset commit:"53fa30f1bb103f6d398b5c486717aa9eeaa667bd".
-
04:32 AM Bug report #11131 (Closed): GPX plugin always saves absolute path
- A project with a GPX file that I opened with the GPS plugin will save that layer with an absolute path, even if the p...
-
- Implemented in master
-
- Implemented in master
-
- Hello,
I can report that showing attributes of an in-memory layer works well under QGis 2.4 (at least on MS-Windows)...
2014-09-02
-
12:57 AM Bug report #11129 (Closed): QgsMapRenderer does not respect DPI
- The dpi parameter is not respected when exporting an image with QgsMapRenderer code below. Same code works with QGIS ...
-
- The mup/down buttons work for reordering of legend nodes within a layer - I guess what is missing is reordering of la...
-
05:55 PM Bug report #3400 (Closed): On project load the Selection color is not properly set.
-
08:48 AM Bug report #11128 (Closed): Edition in attribute table (form view) empties multiline text edit ty...
- I just tested with last master, and I cannot reproduce the issue. Let's close it !
Sorry for the noise, I should hav... -
- I just tested with last master, and I cannot reproduce the issue. Let's close it !
Sorry for the noise, I should hav... -
- I just tested with last master, and I cannot reproduce the issue. Let's close it !
Sorry for the noise, I should hav... -
- Not reproducible on recent master. Did you try with a nightly?
-
- A user reported a bug during edition of an attribute table under QGIS2.4.
To reproduce :
* create a vector layer wi... -
- If it's opened non-modal (that is not via exec() but via show()) control returns immediately to the caller. That mean...
-
07:54 AM Bug report #11115: ui form issues in qgis 2.4
- Ok, I tried "Value Map" and "Value relation" and neither of them worked either. In the past the "line edit" was the ...
-
- Duplicate of #10747
-
02:50 AM Bug report #11119: Wrong scale display
- Reinstalled QGIS.... now it's working.
Bye
2014-09-01
-
11:38 PM Bug report #11127 (Closed): "add feature" icon changes on opening option panel during editing
- During the editing, if you add a feature, save it, and then open the options panel, the "add feature" icon will chang...
-
- Since the latest (very nice!) legend changes have landed, the up and down buttons in the composer legend item panel n...
-
03:19 PM Feature request #11125 (Open): Use bold text in QGIS font marker symbol
- When symbolizing features (point) in QGIS 2.4 using the FONT MARKER symbol type, it would be useful to enable BOLD te...
-
- I think there are good reasons for maintaining the file load ability of the GPS Tools plugin...
but as a workaround, ... -
01:44 PM Bug report #11124 (Closed): Double-clicking layer checkbox opens Layer Properies
- Double-clicking on a layer's name in the layers panel opens the Layer Properties dialog box. This is normal and expec...
-
- Could you do your data editing in a Spatialite layer, then at the end save it as a Shapefile? Spatialite supports mul...
-
- A field widget (e.g. Hidden) is saved in a project, but not in a style. It seems more intuitive if this would be save...
-
03:08 AM Bug report #10904: postgresql table shows only 500 features when adding from "add vector layer" a...
- Joachim Deutmann wrote:
> Jürgen Fischer wrote:
> > Not reproducable here either - are there any messages in the log?... -
- Jürgen Fischer wrote:
> Not reproducable here either - are there any messages in the log?
Hello,
in the protocol i ... -
- Fixed in changeset commit:"a4377ae0297dfffb721a1e2ee44132adf855b99d".
2014-08-31
-
01:27 AM Bug report #11020: freeze when setting offset
- Damien PERRET wrote:
> Jürgen Fischer wrote:
> > Please share a dataset you're experiencing this with.
>
> Hi,
>
> ... -
- Jürgen Fischer wrote:
> Please share a dataset you're experiencing this with.
Hi,
Please find attached an example.
... -
12:47 AM Feature request #11122 (Open): Pdf auto-open
- I would appreciate an option to auto-open pdf files after they are generated.
-
- Fixed in changeset commit:"d994e0a1b31a38ed1a82628ac913d74624ceba79".
2014-08-30
-
- Implemented in master
-
- Implemented in master
-
- After getting used to the new color picker GUI, I sorely missed it when trying to style a raster layer (singleband ps...
-
-
- Fixed in changeset commit:"793db5f53ff99891a297ee4c7dcda6861cc0a09e".
2014-08-29
-
- Not reproducable here either - are there any messages in the log?
-
- Fixed in changeset commit:"acf1f70f137f5bbb374479eaf81cb4aeebeae5d2".
-
- Fixed in changeset commit:"00ca017defb336e46cf773246b1ccb92aaf8540e".
-
- closing for the lack of feedback.
-
- Fixed in changeset commit:"a35138508c06f84cbe374fdb32bf77946b8cfa4f".
-
- Please share a dataset you're experiencing this with.
-
- Please share a dataset you're experiencing this with.
-
- Despite the @/Transfer/@ annotation on @QgsRendererV2Registry::addRenderer@ the @LayerMetadata@ instance is deleted. ...
-
- The underlying issue relates to python subclasses of C++ classes. When the python object is saved in C++ code (eg in...
-
- I've just upgraded Ubuntu to version 14.04 and this issue is now present on Ubuntu as well. So it occurs in 64 bit e...
-
- I've just upgraded Ubuntu to version 14.04 and this issue is now present on Ubuntu as well. So it occurs in 64 bit e...
-
08:33 AM Bug report #10747: Cannot copy/paste points features
- Is there a workaround for this? I've got unprocessed data accumulating for more than a month now, because I can not e...
-
06:48 AM Bug report #11120 (Closed): Can't save legend in postgres when using charater simbol
- When I try to save a legend that contain charather simbol in postgres Qgis return thin error:
[0] Interrogazione er... -
- Also needs to
import traceback
.. or drop " + s " entirely. -
- Hello, I've recently installed QGIS 2.4 on Windows 7 (64bit). Before installing, I disintalled the previous version a...
-
02:36 AM Bug report #11111 (Closed): Some features not displayed in spatialite layer
- I am now sure this was not fault of QGIS but a deficiency of spatialite, so I am retracting it.
2014-08-28
-
- https://github.com/qgis/QGIS/blob/master/python/plugins/processing/algs/grass/GrassUtils.py#L387
fix: insert @L387
s... -
- Hi,
The "Line Edit" has been merged into "Text Edit" which now supports QLineEdit, QTextEdit and QPlainTextEdit.
Fo... -
- We developed a bunch of attribute entry forms for qgis using QTcreator to generate ui files. We set them up in 2.0.1...
-
-
- Added Michael to the list of contributors (commit:cded7c)
-
- Fixed in changeset commit:"4a675734581448869f65a8304a9e11a731fccecb".
-
- Pull request proposed : https://github.com/qgis/QGIS/pull/1566
-
10:50 PM Bug report #11090 (Closed): Unable to display WMTS layer from ArcGIS
- On further investigation, it appears the problem is caused by errors in the WMTS GetCapabilities response from the Ar...
-
- Médéric RIBREUX wrote:
> I've written "an implementation of DBManager for Oracle":https://github.com/medspx/dbmanager... -
- Hello,
I've written "an implementation of DBManager for Oracle":https://github.com/medspx/dbmanager-oracle . It need... -
- Hello,
since QGis 2.4, we can load our own queries (sub-queries) instead of tables.
The queries can be added in a Q... -
- https://github.com/mapbox/maki
-
03:30 AM Bug report #11099: iface.openFeatureForm() does not update feature
- I have been testing the changes in master. openFeatureForm() now changes the input features attributes in modal mode,...
2014-08-27
-
01:48 AM Feature request #11113 (Open): Eraser or rubber tool
- Is it possible to add an "Eraser/rubber tool" like the Rubber tool in e.g. "Paint" or the Eraser tool in Gimp (which ...
-
11:21 PM Bug report #11112 (Closed): Large Format Printing (A1, A0)
- If you print to an external device A2 Prints OK, A1 prints with the Composer content A2 sized at the top left of the ...
-
- Symbols in the "prova" project are huge if the legend is not connected to any composer map (because then it is assume...
-
06:07 AM Bug report #11006: wrong size of item in print composer legend when high values of map unit are used
- I test the patch, retrieving the qgis from wonder repo and compiling it on a debian machine.
It seem dont resolve it.... -
05:05 PM Feature request #11103: Support for retina displays (HiDPI)
- It looks like the backport that adds support for the hidpi pixmaps (required for nice looking icons) hasn't made it i...
-
- Hm, now I tried dropping and recreating the whole database and it seems to display correctly now.
It might be that t... -
- I have spatialite database with two layers that contain close to 2 million rows each (1.83 mil and 1.93 mil). When I ...
-
01:43 PM Bug report #7671: SVG symbols not correctly exported to svg and pdf via print composer
- Hi guys,
I'm experiencing the same issue on _Ubuntu 14.04 LTS_ using _QGIS 2.0.1_.
Confirming that running the Mapb... -
12:53 PM Feature request #9527: Large icons for touch based tablets
- *Thank You* Matthias - And I will share the result, when I - using customization - have made a decent user interface ...
-
- For removing unnecessary menus and icons, please resort to customization (It would be nice if you could share if you ...
-
- Fixed in changeset commit:"b1ce532dfd890cfb548066a317c41bf16b0245a3".
-
- Please post your bug in plugin bugtracker https://issues.qgis.org/projects/semi-automatic-class
-
- Please post your bug in plugin bugtracker https://issues.qgis.org/projects/semi-automatic-class
-
07:32 AM Bug report #11108 (Rejected): Semi-Automatic Classification Plugin error
- I am trying to use the Semi-Automatic Classification Plugin tutorial and cannot get the first step to work correctly....
-
- When using "Translate (convert format)" from the GUI (@gdal_translate@), the export format in batch mode always outpu...
-
- To reproduce :
* Create a "parent" project
* add some groups, sub-groups and layers
* save
* create a "son" project
... -
06:49 AM Feature request #11107 (Closed): Multiple Selection: Two areas for improvement.
- Hi,
1: In almost all the software out there, the "Shift" key is associated with multiple selection. In Qgis, it is al...
2014-08-26
-
- I am having this exact issue in version 2.4.0
-
- I am having this exact issue in version 2.4.0
-
- I am having this exact issue in version 2.4.0
-
- I am having this exact issue in version 2.4.0
-
- I am having this exact issue in version 2.4.0
-
01:42 PM Feature request #11103: Support for retina displays (HiDPI)
- I am also highly interested in this.
I might not be able to help with the coding (I'm a web programmer) but can hel... -
- Currently QGIS does not support Retina displays (HiDPI), such as on the current MacBook Pro. The application loads, b...
-
- Is there any progress on this?
Just seen this which looks similar
http://gis.stackexchange.com/questions/111429/qgis... -
08:38 AM Feature request #11105 (Open): Feedback for reading large comma separated value files
- There is no feedback whilst reading very large delimited text files (e.g., files with several million points). When ...
-
08:33 AM Feature request #11104 (Closed): Advanced digitizing, Offset curve, Edition of the offset
- Hello all,
Actually the offset distance from tool "Offse curve" is made by mouse dragging.
It is possible to intr... -
- Can be closed now, as it's fixed in changeset commit:88b13e89
-
- Indeed with a "graduated" symbology it is much harder to fix as you have to go in each and every class, and the defau...
-
- I shall also mention that for me the artifacts are also visible with "Make lines appear less jagged at the expense of...
-
- Maybe there could be an option to make the border style follow the fill style.
-
- Fixed in changeset commit:"4b8288c026e1cb7d6e1bd30eab6c09aec9b06404".
-
- The default for showModal is True, and it does not change the attributes. Setting it to False will not wait for ok, a...
-
- The issue with the attribute dialog was, that it would always open in modal mode. That means, no map interaction is p...
-
- In QGIS 2.2, the iface.openFeatureForm(layer,feature) would change the features attributes but would not update the f...
-
- Right click on a polygon vector layer > Save as... delimited text file
keep "avoid attribute creation" unchecked
chec... -
03:03 AM Feature request #11100 (Open): Launch Atlas composer via command Line
- Hya,
I would like to launch atlas generation every day.
It would be very useful to be able to launch Atlas compose...
2014-08-25
-
- Right click on a vector layer > save as... and choose "delimited text value" as output format.
The "Export symbology... -
- Right click on a vector layer > save as... and choose shapefile as output format.
There is an useless frame "Layer op... -
- Klas - Isn't your second request already covered by #9292?
-
- This is the same bug as #11006
-
- This is the same bug as #11006
-
- The fix for the problem is in legend-refactoring-part2 branch:
https://github.com/wonder-sk/QGIS/commit/8bc2f8a96b4a3... -
- "this":https://github.com/qgis/QGIS/pull/1561 may fix it
-
- Open a layer Properties Dialog
Go to General Tab and click on the button to specify the right CRS of the layer
In the... -
- Fixed in changeset commit:"7b84ccc9b1d6bf897eae3c0f062c63278b00fc21".
-
- Hi Nyall
In the Composer Manager, when you click on the Rename button, you can't give it an existing name. But that i... -
- How are you renaming the composer to a duplicate name? This should not be possible, so if you can posts the steps you...
-
05:44 AM Bug report #11091 (Closed): Moving SQL Server geodata layer causes crash of OS
- Seems to be a local problem. Other people here don't have the problem. Could be because I have installed 2.2 also and...
-
- Seems to be a local problem. Other people here don't have the problem. Could be because I have installed 2.2 also and...
-
- Ok, this seems to solve the issue.
Thanx! -
- Ok, this seems to solve the issue.
Thanx! -
- Is GWP unique?
Make sure it is, or at least add a int primary key column with IDENTITY. QGIS 2.4 requires there to ... -
- When trying to add certain simple SQL Server-tables in 2.4, like one as added file, QGis tells me it is an invalid la...
-
- Fixed in changeset commit:"d70235ffbe0e2c2710c95778de97369933248ecb".
-
04:41 AM Bug report #10472 (Closed): The "Save" button in "Style" tab is not enough wide for some languages
- Fixed in changeset commit:"f1aafe06c8fe3badccb4d617172a027a7f7d2dd6".
2014-08-24
-
01:58 AM Feature request #11093 (Open): WFS caching and non caching
- The default behaviour for QGIS is to bring in cached wfs layers (ie from geoserver) but with a user limiting the numb...
-
- Open a project
Add a vector layer
Right-click > Save as
1/ choose output format as MID/MIF for e.g.. Don't choose out... -
- Leyan, screenshot?
-
- I can't reproduce it with Windows 7. I tried with different styles, different font sizes, but it is always correctly ...
-
- Even with empty SQL-geodatalayer. Example added.
-
- When I add a SQL Server geodatalayer in a 2.4-project (even a new project, only with one other layer) and I dare to m...
-
- Neither can I anymore
-
- Neither can I anymore
-
- Fixed in changeset commit:"709c285338413adb5f55f1c05781c21027c21cb3".
-
- Fixed in changeset commit:"8230521f5aad204b073f0bd4ec18b3d9894c2d39".
-
- Fixed in changeset commit:"add188b51940f1c673d4a6f7e06da65129e50f9d".
Also available in: Atom