Activity
From 2012-07-17 to 2012-08-15
2012-08-15
-
11:48 PM Bug report #6200: Label direction does not take scale-dependent average to determin line orientation
- This would be most likely fixed with introduction of on-the-fly simplification in the labeling engine. The simplifica...
-
03:40 PM Bug report #6200 (Closed): Label direction does not take scale-dependent average to determin line...
- This is a simple problem.
The new label interface in QGIS 1.9.0 is excellent and dynamic labelling capabilities impr... -
10:51 PM Bug report #6194: QgsRectangle expand uses wrong factor
- There were two functions in QgsRectangle, scale() and expand(). The only difference is that expand() used scalefactor...
-
07:56 PM Bug report #6194: QgsRectangle expand uses wrong factor
- Hi
So just one issue - the qgsrect.sip expand method is missing.... -
- I'm testing your patch and will apply afterwards. Thanks!
Tim -
-
- Here's a patch with test case, someone please review and commit?
-
- Here's a patch with test case, someone please review and commit?
-
- Here's a patch with test case, someone please review and commit?
-
10:31 PM Feature request #5899: Duplicate layer
- Should this be merged with #1483?
N.B. copy and paste (#1483) would be slightly better than duplicate, as you could p... -
- Bernd Vogelgesang wrote:
> put those layers in a group within the TOC for quick on/off of the features.
Ah, OK. Tha... -
- Olivier redlead wrote:
> Often you want to display one Shapefile with several layers (example : for the shapefile Lan... -
- Yes, there are a lot of issues with the tracker configuration. But they should be filed under https://issues.qgis.or...
-
07:12 AM Bug report #6199 (Closed): Tracker bugs
- Two bugs with this web-tracker:
(a) If I change "tracker" from "Bug" to "Feature", most of the bug stuff disappears. ... -
- Sorry, I forgot the attachment, and then the server went offline :(
-
- Even better: add a software-centre style user rating system.
May be over-complex solution, acknowledged.
If so, woul... -
08:14 AM Bug report #4543 (Feedback): New diagrams: option "Show all" missing
- I added a link to "PAL engine settings" to the diagram tab. It's still not as intuitive as it could be, but it's some...
-
- I added a link to "PAL engine settings" to the diagram tab. It's still not as intuitive as it could be, but it's some...
-
- Fixed on my repo:
https://github.com/matthias-kuhn/Quantum-GIS/commit/97a542750cb5c0afac04d3c7d824db4ceb233bfa
Draw... -
07:26 AM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- Problem fixed!
-
- Okay, tried to install from repository. Ubuntu 12.04. Updated GDAL... Still received this message
@$ qgis
Warning:... -
- Ah, that makes sense. Didn't realise there was a difference, but FME does say "SQLite Spatial (FDO)" under the writer...
-
07:15 AM Bug report #6196: QGIS not opening SQLIte file generated by FME
- This file is not a Spatialite DB, but a SQLite DB with a table organization and geometries in FGF (FDO Geometry Forma...
-
- I have a SpatiaLite file I created in FME. It looks valid in SQLiteStudio, but when I try and "connect" to it in QGIS...
-
- It would be nice to be able to make an entire group transparent at once by setting the group itself transparent which...
-
- The SpatiaLite database reader only looks for two filetype extensions. I believe all of the following can also be use...
-
- It doesn't crash QGIS (per #4053), just makes the entire QGIS interface go /incredibly/ slowly despite not actually d...
2012-08-14
-
08:58 AM Bug report #6195 (Closed): Scalebar in print composer always set to last-added map
- Should be fixed in master branch (778e7d735ba8156d6fae55cd1faed77f01f09642)
-
06:56 AM Bug report #6195 (Closed): Scalebar in print composer always set to last-added map
- If a print composer in QGIS has several maps (e.g. a main map and one or several inset maps) and one scalebar (usuall...
-
08:19 AM Feature request #5899: Duplicate layer
- I already found several past feature requests which weren't processed or where the relevance of the topic didn't get ...
-
- The expand( scaleFactor ) function in QgsRectangle does not work as expected with a scale factor. Patch and test case...
2012-08-13
-
- Attached is a small example zip.
Don't extract it - use the new ability in QGIS (since 1.8) to load the shp layers fr... -
- Yes, sorry, it is a regression, although I'm not sure if it has regressed since 1.8 or 1.7 or what.
Note: I'm not ab... -
08:32 AM Bug report #6181 (Feedback): Crash when trying to load a composer template
- if it is a regression please tag this as "blocker".
-
- Yes, sorry, it is a regression, although I'm not sure if it has regressed since 1.8 or 1.7 or what.
Note: I'm not ab... -
- if it is a regression please tag this as "blocker".
-
- Installed from source, using synaptic GUI, all relevant dependencies updated from a nightly build, i.e.
@deb htt... -
11:58 AM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
- Jason Matney wrote:
> @$ qgis
> Warning: loading of qgis translation failed [/usr/share/qgis/i18n//qgis_en_US]
> Warn... -
- @$ qgis
Warning: loading of qgis translation failed [/usr/share/qgis/i18n//qgis_en_US]
Warning: loading of qt transla... -
11:16 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
- Giovanni Manghi wrote:
> Maximilian L. wrote:
> > Salvatore Larosa wrote:
> > > Giovanni Manghi wrote:
> > > > postgi... -
- Maximilian L. wrote:
> Salvatore Larosa wrote:
> > Giovanni Manghi wrote:
> > > postgis manager uses shp2pgsql so it ... -
- Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > postgis manager uses shp2pgsql so it should work
>
> You're rig... -
> Also, I guess there is a redundance between PostGIS Manager, Spatialite Manager and
> RT_SQL Layer plugins. I do n...-
- Giovanni Manghi wrote:
> > I think Maximilian was referring to shp2pgsql-gui importer!
> > Unfortunately, no QGIS plu... -
> I think Maximilian was referring to shp2pgsql-gui importer!
> Unfortunately, no QGIS plugin at the moment works!
...-
- Giovanni Manghi wrote:
> Maximilian L. wrote:
>
> > I know but this is no solution for me...seems that I have to use... -
- Maximilian L. wrote:
> I know but this is no solution for me...seems that I have to use the PostGIS Shapefile Loader... -
- Nikos Ves wrote:
> checked against latested git build as well with qgis 1.8.
>
> PostgreSQL 9.1.4 with (POSTGIS="2.... -
- Nikos Ves wrote:
> checked against latested git build as well with qgis 1.8.
>
> PostgreSQL 9.1.4 with (POSTGIS="2.... -
10:39 AM Bug report #3828: dissolve tool very slow
- Giovanni Manghi wrote:
> seems still very slow, even with this patch
>
> https://github.com/qgis/Quantum-GIS/pull/17... -
- Giovanni Manghi wrote:
> Alexander Bruy wrote:
>
> > Giovanni, it doesn't works for me.
>
> try here
>
> http://ub... -
- isn't this a duplicate of #4053?
I changed the priority because "blockers" is used to tag regressions. This (unfort... -
- isn't this a duplicate of #4053?
I changed the priority because "blockers" is used to tag regressions. This (unfort... -
- If I enable this plugin, even if every other plugin is disabled and this plugin is doing nothing, it will bring QGIS ...
-
-
-
08:16 AM Bug report #5235: Link to SQL server spatial view fails
- This appears to now work in 1.9-0 Master
QGIS code revision
829f672
Thanks -
07:41 AM Bug report #6191 (Closed): QWebFrame / QWebPage not found
- Fixed in changeset commit:"981ea2831618142dad29a98a4ee012459a3bba9d".
-
07:24 AM Bug report #6191 (Closed): QWebFrame / QWebPage not found
- When compiling master WITH_DESKTOP OFF (and WITH_MAPSERVER ON and WITH_BINDINGS ON) compile (make) crashes on src/cor...
-
06:39 AM Bug report #6187: Raster disappears when bands change
- How can a raster be buggy? ;)
Yes, it seems that the problem is in how QGIS handles rasters that are not georeferenc... -
- I'm not sure if this is a configuration issue - but when I have a multipoint object in the SQL database (displays as ...
-
- Now in master it is possible to easy populate the x/y columns with the "pin labels" tool, and so have the labels auto...
-
- Now in master it is possible to easy populate the x/y columns with the "pin labels" tool, and so have the labels auto...
-
- Larry Shaffer wrote:
> Giovanni Manghi wrote:
>
> > It seems to me that you already committed this changes into mast... -
- Larry Shaffer wrote:
> Giovanni Manghi wrote:
>
> > It seems to me that you already committed this changes into mast... -
> Can you tell me how you found it so quickly, I do not see it mentioned in the bugreport?
because of #5809
Your ...-
> Can you tell me how you found it so quickly, I do not see it mentioned in the bugreport?
because of #5809
Your ...-
04:26 AM Bug report #6189: Project crash after update on an openSUSE 11.4
- Giovanni, of course you are right. That particular layer was missing.
Can you tell me how you found it so quickly, ... -
- seems duplicate of #5809 that was already fixed in qgis-master.
-
- the layer "capef.wkt" is still in the same path defined in the project file?
If I remove it the project opens with n... -
- Version of the project file: 1.7.4-Wroclaw
Current version of QGIS: 1.8.0-Lisboa
See attached files -
02:09 AM Feature request #6188 (Closed): Let the user fine tune stretching values in raster properties/style
- When the user selects Use standard deviation and selects
a value for the sd, the calculated min,max values are greyed...
2012-08-12
-
- This raster works after decomposing to separate bands and then merging them into single file.
-
- Seems your raster is buggy. With any another multiband file all works
-
- 1. Add http://gis-lab.info/forum/download/file.php?id=4783 --> All fine
2. Go to raster properties, switch any band ... -
- > I already filed this ticket #5547!
Thank you!
> It is occurs because your polygon dataset has some multipolygon g... -
- Maximilian L. wrote:
> Thank you for this information. But trying to import SHP into PostGIS with DB Manager brings m... -
- Salvatore Larosa wrote:
> Actually there is not any solution for that, the better way to import SHP into PostGIS is w... -
- Load a jpeg into QGIS.
Right-click the jpeg layer in the TOC.
Choose Properties>Pyramids.
Select the option "Build py... -
- Make a jpeg file read-only.
Load the jpeg into QGIS.
Right-click the jpeg layer in the TOC
Choose Properties>Pyram... -
- Right-click on a vector layer in the TOC and click "copy style".
Right-click on another vector layer in the TOC and c... -
- e.g. 1 - copy and paste style:
- Right-click on a polygon layer in the TOC and click "Copy style"
- ("accidentally") ... -
- I don't see anything useful in DebugView or the msys terminal if I start QGIS from that. This is the error signature...
-
- With current master on Windows (at least - I haven't tested other platforms yet), QGIS crashes when I try to print wi...
-
- I don't see anything useful in DebugView or the msys terminal if I start QGIS from that. This is the error signature...
-
- With current master on Windows (at least - I haven't tested other platforms yet), QGIS crashes when I try to load a t...
-
08:45 PM Bug report #2249: Font size in label preview should not changes when "Font size units: Map units"...
- Should be fixed with commit:547a05a
Map units now default to sample at 24 pts. Could be better with actual preview w... -
- Nathan Woodrow wrote:
> I have also thought about a Update from Template which checks the name of each item vs the na... -
- Have a look at:
commit:2fbc98e66f62a3c1324654a5957258ed29849f44
and
commit:3dd05e6842757a8e466375ac062aefb072b09d9c
... -
- Any updates? Can we close this?
-
05:10 PM Bug report #6176: When adding postgis layer the build query feature doesn't work
- checked against latested git build as well with qgis 1.8.
PostgreSQL 9.1.4 with (POSTGIS="2.1.0SVN" GEOS="3.3.4-CAP... -
- what version of QGIS? what platform? what PostGIS version?
-
- When adding a postgis layer the build query test always returns 0 (rows). The same where clause from inside postgis r...
-
- moved from https://trac.faunalia.it/qgis_plugins/ticket/4
It will be also useful to add geotagged photos, extracting... -
- If it is a regression please tag this as blocker.
-
12:36 PM Bug report #6175 (Closed): Open file with QGIS when not running closes new project
- if QGIS is not running, and you double-click/drag-n-drop/open-with a file (ie a shapefile), this normally starts up Q...
-
- I can't reproduce this in master.
-
- patch attached
2012-08-11
-
- Does it happens also on master?
-
- Alister Hood wrote:
> The category for this should possibly be "labelling".
> But is there even a reason this ticket ... -
- Alister Hood wrote:
> The category for this should possibly be "labelling".
> But is there even a reason this ticket ... -
- John Tull wrote:
> Perhaps #6114 is a duplicate of this, or a different, possibly better, explanation of the same pro... -
- alicebtoklas - wrote:
> What's up? It is still impossible to draw a good map with diagrams in QGIS!
work is being ma...
2012-08-10
-
- The work to add the color ramps for rasters is ongoing but I think we can definitely close this ticket. A lot of colo...
-
- The work to add the color ramps for rasters is ongoing but I think we can definitely close this ticket. A lot of colo...
-
- The work to add the color ramps for rasters is ongoing but I think we can definitely close this ticket. A lot of colo...
-
- A lot of color ramps (the ones available for vectors plus the ones available on CPT CITY, including the GRASS ones) f...
-
- A lot of color ramps (the ones available for vectors plus the ones available on CPT CITY, including the GRASS ones) f...
-
- A lot of color ramps (the ones available for vectors plus the ones available on CPT CITY, including the GRASS ones) f...
-
- A lot of color ramps (the ones available for vectors plus the ones available on CPT CITY, including the GRASS ones) f...
-
- Agus,
rasters are under heavy development in qgis-master. I guess soon we must check every raster related ticket and... -
- Confirmed the problem of the erroneous stats in the GTif files with several
examples.
These files are created in R th... -
02:24 AM Feature request #5381: Info panel or tab for user feedback
- Ok. I have implemented something like I imagined. See attachment. Also errors are just shown in the log (in red): no ...
2012-08-09
-
- Fixed.
See #4011 -
- Fixed.
See #4011 -
-
06:46 PM Bug report #6173: load SLD symbology issue
- Still the same issue. Here's what I did:
* I got the MASTER installed. Loaded the test shapefile and the QML style (... -
- Hi,
you must test qgis-master, there have been fixes about SLD support after qgis 1.8 was released. Please test agai... -
- I have produced a rule based style that includes line patterns. I've saved the style as both SLD and QML. When I use ...
-
-
- Fixed on master
New config option in Settings=>Options=>Rendering=>Enable backbuffer
(Only X11 / Linux )
If enabled... -
11:26 AM Bug report #6038: Forward Transform Error of GPS data...
- Only workaround seems to be use basemaps in WGS84 4326.
-
- Giovanni Manghi wrote:
> It seems to me that you already committed this changes into master, right? I will give it a... -
- Hi Larry,
Larry Shaffer wrote:
> Giovanni Manghi wrote:
> > ... But what about if the user mistakenly does map also ... -
- Maximilian L. wrote:
> I tested 1.7.4 and 1.8 on Windows 7 but got the same error-message in SPIT. :( How can I fix t... -
- Salvatore Larosa wrote:
> I also tried the version 1.7.4 is working correctly on Windows!
> The problem seems to be p... -
> michele zanolli wrote:
> > Affected version: master and 1.8
> >
> > With 1.7.4 it was working correctly!
sorry, I...-
02:33 AM Bug report #6164: postgis layer: duplicate primary key
- Giovanni Manghi wrote:
> Did you tested qgis-master? please give it a try and report back, thanks.
michele zanolli w... -
- Did you tested qgis-master? please give it a try and report back, thanks.
-
02:13 AM Bug report #6172: QGIS freezes when deleting features from big PostGIS table
- Thank you, jef
Everything works great!
2012-08-08
-
- Fixed in changeset commit:"2ab022184d377d1f50614b2887e18cef05eb38e1".
-
- Not a postgres provider problem. After features are deleted, the layer extents are recalculated by iterating all not...
-
- Hi,
I have PostGIS table with 10e6 features. "Scale dependent" is set to display only 100-500 features. All work ver... -
- Fixed in changeset commit:"928da6e3bb435da0112bb373096871597012e212".
-
- My debugger (VS2008) was complaining about a heap corruption. After some investigation I could locate the following:
... -
- duplicate #5256 #4634
https://github.com/qgis/Quantum-GIS/pull/201 -
04:03 AM Bug report #4634: [PATCH] New labelling engine: wrong label placement with both "around centroid"...
- see https://github.com/qgis/Quantum-GIS/pull/201
-
- Since qgis 1.8 there is the new "Run feature action" tool, but this is empty by default. There is always an action av...
-
- There is a possibility to show all diagrams, but it's rather a side-effect than a feature.
Enable labels for this la...
2012-08-07
-
- Giovanni Manghi wrote:
> ... But what about if the user mistakenly does map also the rotation field before freezing? ... -
- Larry Shaffer wrote:
> Giovanni,
>
> Interesting. I had not anticipated such predefined rotation-only, though this i... -
- See https://github.com/qgis/Quantum-GIS/pull/199
-
-
08:42 AM Bug report #5790: fTool Check geometry tools gives an error when you close the window
- fixed in #5976
-
- > But will there still be a problem on someone else's machine due to their QT theme or font size settings
Maybe the ... -
- On my Linux system the function list label in the expression builder dialogue overlaps with the search box, as you ca...
-
- When I try to copy one feature from a postgis layer to another (or to the same layer), the value of the primary key (...
-
- it happens (very very often) that after filling fields of dbf table by means of field calculator or typing directly, ...
-
- Anyone affected by this issue please give a try to this fork/branch
https://github.com/matthias-kuhn/Quantum-GIS/tre...
2012-08-06
-
01:56 AM Bug report #6162 (Closed): Incorrect placement of ABC labels
- When trying to label a polygon layer I wanted to place the label over the polygon centroids.
This should be possible ... -
07:13 PM Feature request #5945: Point displacement labels adjustable offsets
- Perhaps #6114 is a duplicate of this, or a different, possibly better, explanation of the same problem. This bug repo...
-
- I think this is really a duplicate of #6114
-
- There is an upper() function, which is what I initially thought this ticket was about, in at least master (not sure a...
-
- There is an upper() function, which is what I initially thought this ticket was about, in at least master (not sure a...
-
- The category for this should possibly be "labelling".
But is there even a reason this ticket is still open? It is fi... -
- Note that while the "old labelling" tab on the layer properties does nothing when using "point displacement", the "ne...
-
- I guess the category should be either "labelling" or "Printing".
-
- I guess the category should be either "labelling" or "Printing".
-
- I guess the category should be either "labelling" or "Printing".
-
- I guess the category should be either "labelling" or "Printing".
-
- If I read correctly, this is a problem with "old labelling", so will not be applicable when "old labelling" is removed.
-
- If I read correctly, this is a problem with "old labelling", so will not be applicable when "old labelling" is removed.
-
- If I read correctly, this is a problem with "old labelling", so will not be applicable when "old labelling" is removed.
-
- If I read correctly, this is a problem with "old labelling", so will not be applicable when "old labelling" is removed.
-
- If I read correctly, this is a problem with "old labelling", so will not be applicable when "old labelling" is removed.
-
- New link for that map:
https://issues.qgis.org/attachments/3102/asia_map.jpg -
- New link for that map:
https://issues.qgis.org/attachments/3102/asia_map.jpg -
- New link for that map:
https://issues.qgis.org/attachments/3102/asia_map.jpg -
- New link for that map:
https://issues.qgis.org/attachments/3102/asia_map.jpg -
- Hi Liana,
Please give more information:
* What OS X version?
* Which QGIS version?
* Sample data to test with.
* St... -
02:30 PM Bug report #6161 (Closed): Zoom to layer/Zoom to selection bug with the Mac version
- Using the Mac version, in view layer, the zoom to layer or zoom to selection do not work under some undefined situati...
-
- BTW buffered labels with old labeling can also cause the print output to explode.
-
- Would be useful add the support to store settings for recently used algs, especially for FieldPyculator alg and other...
-
05:00 AM Bug report #6155: SLD Export fails to write out LineSymbolizer Stroke information
- Evening Giuseppe.
Nathan and myself were at a code sprint this weekend trying a bit of SLD interoperability. I am in... -
03:31 AM Bug report #6155: SLD Export fails to write out LineSymbolizer Stroke information
- Jody Garnett wrote:
> Related GeoTools bug report is here: https://jira.codehaus.org/browse/GEOT-4220
Is it a QGis b... -
- QGis export styles to SLD 1.1 only, and the @version="1.1.0"@ attribute is present in the root tag.
I doesn't unders... -
- Okay I got trapped on the SLD 1.0 vs SE 1.1 divide:
A bit of progress here manually taking things back to an SLD 1.0... -
04:17 AM Feature request #6159 (Closed): WMS provider: retrieve the legend with a getLegendGraphic call
- I guess when available should be very useful retrieve the legend from the WMS with a GetLegendGraphics Call.
An exma...
2012-08-05
-
01:49 AM Feature request #6059: add the ability to select character code when creating a new shape file
- The encoding selectbox you wish is in the QgsEncodingFileDialog. It is displayed next to the "New Vector Layer" dialo...
-
09:28 AM Bug report #4398: diagrams do not superpose
- What's up? It is still impossible to draw a good map with diagrams in QGIS!
-
-
- mescal72 - wrote:
> I test it on ubuntu 12.04 and it works.
> The problem remains on win 7. I have to try with a fres... -
2012-08-04
-
- Looks to be just a interoperability fail, SLD 1.0 version SLD 1.1 etc...
For examples of the different files: http:/... -
- To reproduced using master:
1. natural earth quickstart dataset
2. qgis "new symbology" styles from under dark (tha... -
- Fixed in changeset commit:"136a65c7b455ae0d0e1fbcc7c351ebe57ddd45d0".
-
- Andrea Aime wrote:
> in order to support proper legend generations in GeoServer it should use Title, not Abstract
I ... -
09:15 AM Bug report #6152: SLD export saves a schema invalid file
- Ok, with QGis master things look better, the document is valid, but it will still won't work 100% good with SLD based...
-
- Andrea Aime wrote:
> I've just found the same behavior on the Windows release of QGIS 1.8.0 Lisboa, so it's not OS or... -
- I've just found the same behavior on the Windows release of QGIS 1.8.0 Lisboa, so it's not OS or package specific
-
- Andrea Aime wrote:
> Btw, this is on Ubuntu 10.04, QGIS 1.8.0 - Lisboa, coming from the UbuntuGIS apt
there is a rep... -
- Btw, this is on Ubuntu 10.04, QGIS 1.8.0 - Lisboa, coming from the UbuntuGIS apt
-
- please give a try to qgis master, there have been fixes ablut SLD support after the relase of qgis 1.8
-
- please give a try to qgis master, there have been fixes ablut SLD support after the relase of qgis 1.8
-
- The rules generated by QGIS contain schema invalid output, here is a sample:...
-
- Tested with trunk, it works fine there
-
- Exporting a graduated style with 5 classes for a polygon layer results in a SLD with 5 rules, but none of them having...
-
> This is more important on Linux, where the old symbology seems to be the default, while on Windows XP I'm getting ...-
- If this is the case the "export to SLD" functionality should at least be hidden or disabled when using the old symbol...
-
- Btw, the bug happens on release 1.8.0 Lisboa on both Ubuntu 10.04 and Windows XP
-
- Hi,
old symbology is not supported anymore, it will dropped in QGIS 2.0 and it is still in QGIS 1.x for retro-compab... -
- Trying to export a 5 classes graduated symbology using the "old symbology" as SLD results in an incomplete error mess...
-
- If default LDID of OGR Shapefile Driver dataset creation was changed to zero, the encoding problem of shapefiles gene...
2012-08-03
-
11:21 PM Bug report #6135: Node tool fails on first selected point
- I test it on ubuntu 12.04 and it works.
The problem remains on win 7. I have to try with a fresh installation ? -
- I cannot reproduce it.
Does the issue occur with every vector layer you edit? -
- mescal72 - wrote:
> in 1.8 it works fine !
then it is a regression and so it is a blocker issue -
- mescal72 - wrote:
> in 1.8 it works fine !
then it is a regression and so it is a blocker issue -
- mescal72 - wrote:
> in 1.8 it works fine !
then it is a regression and so it is a blocker issue -
- mescal72 - wrote:
> in 1.8 it works fine !
then it is a regression and so it is a blocker issue -
- I rechecked it and the Delaunay tool seem works fine!
Only the Convex Hull tool is affected! -
- I rechecked it and the Delaunay tool seem works fine!
Only the Convex Hull tool is affected! -
- I rechecked it and the Delaunay tool seem works fine!
Only the Convex Hull tool is affected! -
- It seems persist yet!
-
-
- Fixed in changeset commit:"3305ccda50c3e64ed85ffc6d90ecc6f74f553b74".
-
10:17 AM Bug report #6151 (Closed): fTools crashes when trying to display an error message
- fTools crashes when trying to display the error message below:
File tools/doMergeShapes.py, line 130, in accept
QMe... -
- Confirmed!
If "create convex hulls based on input field" is checked the tool write the values in the first three f...
2012-08-02
-
- in 1.8 it works fine !
-
- is this a regression in master since 1.8?
-
- See also http://trac.osgeo.org/gdal/ticket/4739
-
04:36 PM Bug report #6125: Restoring print composer panels
- It is probably a permissions setting...
-
- This is how to edit your issue: http://www.redmine.org/projects/redmine/wiki/RedmineIssues#Updating-an-existing-issue...
-
- Thank you for your Help, Larry. I am waiting for feedback to confirm that your solution worked. Meanwhile I don't s...
-
- I have come across recent instances where I sometimes want to see a subset of a layer through the use of the query bu...
-
- Giovanni,
Regarding your question:
> "The above is quite counter-intuitive and for polygons (and also lines I guess... -
- Giovanni,
Interesting. I had not anticipated such predefined rotation-only, though this issue certainly is concerned... -
- Fixed in changeset commit:"5988a9c9dc5898ea2fe7463e65e854189e07b16f".
-
- That behavior depends on the provider, there's a check that allows @SELECT@ queries only.
Removing that check was dis... -
- That behavior depends on the provider, there's a check that allows @SELECT@ queries only.
Removing that check was dis... -
- That behavior depends on the provider, there's a check that allows @SELECT@ queries only.
Removing that check was dis... -
- That behavior depends on the provider, there's a check that allows @SELECT@ queries only.
Removing that check was dis... -
03:07 AM Bug report #6142 (Closed): problem with 'WITH' query in DB Manager to create new layer from query...
- When using DB Manager, and the SQL Windows,
When using a 'WITH' in a SQL query the result rows are properly shown and... -
- * pick a postgis layer
* put it in off-line mode
* start editing
* QGIS won't auto-increment the primary key
* if no ... -
- Giovanni Manghi wrote:
> Editing capabilities of this layer: Add Features, Delete Features, Change Attribute Values, ... -
- > Why? The capabilities are listed in the layer properties meta data tab. With that and the comments above it shoul...
-
- Fixed in changeset commit:"28b8ab09add47914ebd2c678baf769160d65ee37".
-
- Giovanni Manghi wrote:
> But as a mere user I can't say if it is a bug in the provider or in the FC.
Why? The capab... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > the important issue is that a non owner user, with the proper perm... -
> That's outside of the scope of the field calculator. If the provider reports that the layer supports @ChangeAttri...-
- Giovanni Manghi wrote:
> the important issue is that a non owner user, with the proper permissions, should still be a... -
- Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > I'm not sure the new title reflects correctly the issue that non o... -
- Giovanni Manghi wrote:
> I'm not sure the new title reflects correctly the issue that non owner users are not allowed... -
- Hi Jurgen,
I'm not sure the new title reflects correctly the issue that non owner users are not allowed to update fi... -
- Otherwise core tools like eVis won't work out of the box under Linux.
-
- invalid as I missed
libqt4-sql-psql
libqt4-sql-sqlite -
- invalid as I missed
libqt4-sql-psql
libqt4-sql-sqlite -
- There is a new patch here
http://lists.osgeo.org/pipermail/qgis-developer/2012-August/021444.html -
- There is a new patch here
http://lists.osgeo.org/pipermail/qgis-developer/2012-August/021444.html -
- duplicate of #6120
-
- duplicate of #6120
-
03:23 AM Bug report #6143 (Closed): Field Calculator - No update existing field option available for PostG...
- There is no update existing field option available for a postgis vector layer when not logged on as the table owner. ...
-
- Brian Fitzgerald wrote:
> Yes, QGIS becomes unresponsive and crashes hard.
-
- Brian Fitzgerald wrote:
> Yes, QGIS becomes unresponsive and crashes hard.
-
- Brian Fitzgerald wrote:
> Yes, QGIS becomes unresponsive and crashes hard.
2012-08-01
-
- Damien,
Using 1.8.0, I hid all panels and the toolbar in Print Composer and could not find a way to retrieve them wi... -
- Thank you Larry. Forgive me for not putting the missing details in right away, but I need to contact the student who...
-
- Damien,
Control-clicking the toolbar (not menu bar) in Mac and selecting the panel that is missing does the trick in... -
- Damien,
Control-clicking the toolbar (not menu bar) in Mac and selecting the panel that is missing does the trick in... -
- I attach a patch for solution number 3.
-
- I show three solutions:
1. Create a mapping which converts the MIBenum to text of cpg file(or LDID value). @QTextCode... -
07:42 PM Bug report #6117: Eckert projections not available as User Defined CRS once created as Custom CRS
- Jürgen--thanks for your help! I have found EPSG:53015 in QGIS-dev master as you mentioned, but I still encounter the ...
-
- implemented in commit:539b7cb7
-
- implemented in commit:539b7cb7
-
- Hi.
I discovered an interesting fact.
The link now work.
The explanation is that my test was made all behind a proxy.... -
- This url callable from a browser show what is the response of a WMS to a GetFeatureInfo.
[http://web.regione.toscana... -
- Could you update issue info on platform please. Also, do you have a test URL for the WMS server used?
-
- I guess the more useful solution was if the link was follow opening a browser windows.
-
- Alexandre,
The _New Shapefile Layer..._ action uses a subclassed QFileDialog, and shows a Qt, instead of Mac OS X na... -
- The attached shapefile contains some features marked for deletion but not really removed from the file.
If you try to... -
- I am not sure that solve the issue!
In attached there are 2 images, the first image as shown the layer in gvSIG and s... -
- I am not sure that solve the issue!
In attached there are 2 images, the first image as shown the layer in gvSIG and s... -
- Fixed in commit:ec87f7f8eb
BTW, the problem is due to the character @ñ@ in the filename.
Until you update QGis to th... -
- Fixed in commit:ec87f7f8eb
BTW, the problem is due to the character @ñ@ in the filename.
Until you update QGis to th... -
- No it's different:
with the first click I select the polygon, now I try to move the vertex with another click but wh... -
- The supposed working behavior is:
the first click selects the polygon you'll work on (red squares are displayed over... -
- Yes, QGIS becomes unresponsive and crashes hard.
-
- Fixed in changeset commit:"40c01ad1828def0b602766544a75b92a8661d050".
-
04:31 AM Bug report #6116: QGIS WFS server doesn't work with uDIG and Arcgis as clients
- Moving FeatureTyepList element to WFS_Capabilities
-
04:06 AM Bug report #6138 (Closed): Cannot specify encoding for compressed Shapefiles
- Using new file browser panel, it is possible to load compressed Shapefiles. But I don't see a way to specify the attr...
2012-07-31
-
01:25 AM Feature request #6136 (Closed): allow for user to change the line height of qgis composer label e...
- Similarly to how a user can modify space in between legend items, it'd be nice to have a spin box to set the line hei...
-
- The node tool fails to move the first selected node.
1. Start editing session with toggle editing
2. select node too... -
- from a series of GPS surveys, I have merged them into a single shape file.
From this shape file I have selected some ... -
-
10:01 AM Bug report #6119: EVIS: invalid layer in project
- Hello,
I agree that the change done in the revision #23a34121 on src/providers/delimitedtext/qgsdelimitedtextprovide... -
08:43 AM Bug report #6131 (Closed): New layer creation file browser doesn't resolve aliases in MacOS
- In QGIS 1.8.0-2 for MacOS X from KyngChaos, aliases don't get resolved in the layer creation file browser when creati...
-
- likely a duplicate of #5809
-
- likely a duplicate of #5809
-
07:33 AM Bug report #6129 (Closed): QGIS 1.8.0 crashes when trying to open older File
- When opening an older file in QGIS 1.73, it properly starts (by displaying a dialogue with missing raster- and shape-...
-
- Identify.ing from a wms with a text/html response, qgis will produce a perfect window with html tags.
It build also t... -
- Jürgen Fischer wrote:
> You mean the user can change attributes in the attribute table, but cannot update existing fi... -
- You mean the user can change attributes in the attribute table, but cannot update existing fields using the field cal...
2012-07-30
-
-
- Issue #6042 was dismissed quickly as a non-issue, but the problem is not solved in the case of 1.8.0 for the mac, whe...
-
- This bug should not be closed - the solution is not possible for the mac version. The panels don't seem recoverable.
-
11:19 AM Bug report #6124 (Closed): Vector Grid does not respect exact coordinates
- h2. How to reproduce:
Try to create a reference grid as that given at http://hydro1.sci.gsfc.nasa.gov/dods/NLDAS_FOR... -
- On current master, self packaged on Debian, I cannot find the OWS entry
in the browser. A colleague is seeing it on W... -
- I'm not sure this will be seen as a bug from the dev point of view, but it is certainly and inconsistency from the us...
-
- duplicate of #5832 (I assume the temporary file is gone).
-
- duplicate of #5832 (I assume the temporary file is gone).
-
- Configuration:
Windows XP SP3
QGIS Version 1.8.0-Lisboa
Code Revision: 6416f38
I created some projects and for ...
2012-07-29
-
01:11 PM Bug report #6118 (Closed): New Labeling, Rotation over Point is not enabled
- New Labeling, section advanced, Placement: "over point" let appear the label midth of the point.
Set y, y and rotatio... -
- Jürgen Fischer wrote:
> Fixed in changeset commit:"12106b8b8b638f3543e49807334f6dd7bbbb7480".
"projection entries" a... -
- Fixed in changeset commit:"12106b8b8b638f3543e49807334f6dd7bbbb7480".
-
- Some historical projections, specifically the Max Eckert series (Eckert I-VI) can be successfully defined in the Cust...
2012-07-28
-
- Fixed in changeset commit:"ad9cb9d19440c8f95516f1bbeb10ddb03178d949".
-
- After a few tests with WFS clients other than QGIS (gvSIG, uDIG and Arcgis 10/9.3) that the only working WFS client f...
-
- Larry Shaffer wrote:
> Giovanni, the new Freeze/Thaw label tool will handle the need for populating the attribute tab... -
- subject says it all. Actually the options for labels in this specific renderer are limited to font size, type and col...
-
- Steps to replicate:
* open a point layer and set the symbology to "point displacement"
* zoom to a cluster of point... -
> LC_ALL=C ogr2ogr -f KML censo-ap2.kml 16SEE250GC_SIR.shp
> LC_ALL=pt_BR.UTF-8 ogr2ogr -f KML censo-ap3.kml 16SEE25...-
- Rodrigo Hjort wrote:
> I don't know. Yes, I'm on *1.8.0*.
Not reproducable here. What's your platform and GDAL vers... -
- seems very similar to #5895. Does this error makes QGIS not responding anymore?
-
- seems very similar to #5895. Does this error makes QGIS not responding anymore?
2012-07-27
-
- then is a qgis issue.
> I've just tested *ogr2ogr* as you suggested. It generates proper KML files regardless the lo... -
- then is a qgis issue.
> I've just tested *ogr2ogr* as you suggested. It generates proper KML files regardless the lo... -
02:22 PM Bug report #6110: KML export is generating decimal separators depending on system locale
- _Giovanni Manghi wrote:_
> Tickets are tagged as blockers only if are regressions. Is this a regression since 1.7.4 (... -
- Tickets are tagged as blockers only if are regressions. Is this a regression since 1.7.4 (are you using 1.8, right?)?...
-
- Tickets are tagged as blockers only if are regressions. Is this a regression since 1.7.4 (are you using 1.8, right?)?...
-
- Tickets are tagged as blockers only if are regressions. Is this a regression since 1.7.4 (are you using 1.8, right?)?...
-
- I'm using Quantum GIS on Linux with *locales set to pt-BR* (Brazilian Portuguese).
When I *export to KML*, it produc... -
- h2. How to reproduce:
# Start QGIS with no project or layers
# Go to Vector→ Research Tools→ Vector grid
# set up ex... -
- Qt 4.8.1 is also still affected (see "![Qgis-developer] Map canvas flickers":http://lists.osgeo.org/pipermail/qgis-de...
-
- Matthias Kuhn wrote:
> Looking at Marcos update for Issue #2714 it could be reproduced with at least Qt 4.6.2 and 4.7... -
- Looking at Marcos update for Issue #2714 it could be reproduced with at least Qt 4.6.2 and 4.7.
Regarding the fact t... -
- what value did you used (for the distance) to make a 10km buffer in a lat/lon layer?
-
- what value did you used (for the distance) to make a 10km buffer in a lat/lon layer?
-
03:37 AM Bug report #6107 (Closed): Crash with buffer
- -open shape file
-vector->buffer
want to create a 10km buffer on a EPSG:4326 vector file
-QGIs freez... -
-
- To arrange info in a tabular look, it is common to use tab-stops. Inside the Print Composer, when adding a label it i...
-
- src/plugins/plugin_template/README says this:
@Please visit: http://wiki.qgis.org/qgiswiki/DevelopingPlugins@
@
For ...
2012-07-26
-
- Nathaniel Kale wrote:
> However, if you duplicate the steps up to adding or deleting characters, then end the editin... -
- Nathaniel Kale wrote:
> However, if you duplicate the steps up to adding or deleting characters, then end the editin... -
- Nathaniel Kale wrote:
> However, if you duplicate the steps up to adding or deleting characters, then end the editin... -
- Nathaniel Kale wrote:
> However, if you duplicate the steps up to adding or deleting characters, then end the editin... -
- Nathaniel Kale wrote:
> However, if you duplicate the steps up to adding or deleting characters, then end the editin... -
04:20 PM Bug report #6102: Clicking save when actively editing attribute doesn't save changes.
- Tough to say if it's a regression. My 1.7.4 on my Windows XP computer at home doesn't have a save button on the attr...
-
- Is this a regression since 1.7.4 ?
-
- To reproduce - open a shapefile (not tested on other feature class types). Open the attribute table and start an edi...
-
- Chris Crook wrote:
> Indeed it is ... I tried searching for a matching issue, but missed it :-(
no problem.
Closin... -
- Chris Crook wrote:
> Indeed it is ... I tried searching for a matching issue, but missed it :-(
no problem.
Closin... -
03:13 PM Bug report #6101: User not warned of uncommited edits when closing
- Indeed it is ... I tried searching for a matching issue, but missed it :-(
-
- isn't this a duplicate of #6054 ?
-
- Steps to reproduce:
1) Open a new project
2) Add an editable layer (I've tried memory and shapefile).
3) Save the p... -
12:18 PM Bug report #6100 (Closed): Missing python binding for QgsExpressionBuilderDialog
- Hi
There is no SIP file for QgsExpressionBuilderDialog class. It'd be helpful to use Expression Builder window in pyt... -
07:01 AM Bug report #5954 (Feedback): v.distance does not list existing columns, possibly broken?
- it works here (the algorithm executes), although the results are empty... One of the things this algorithm does is to...
-
- v.distance still does not work for me
-
- v.distance.toattr is not available from the list of modules
-
-
- The file saved misses the file extension (e.g. .tif); it has to be entered by hand
2012-07-25
-
- Wouter Boasson wrote:
> Excellent! It is working again, the combination of 'estimated metadata' and 'geometry_columns... -
- Wouter Boasson wrote:
> Excellent! It is working again, the combination of 'estimated metadata' and 'geometry_columns... -
09:56 AM Bug report #6097 (Closed): Getting wrong attribute values from a feature in qgis
- This scenario shows the bug:
I make two polylines features(in my example both consists of two points) with the add fe... -
09:54 AM Bug report #6096: Negative values are classified incorrectly using new symbology
- Giovanni Manghi wrote:
> Can you check if this is a regression since 1.7.4?
Short answer: no. I never upgraded from ... -
- Can you check if this is a regression since 1.7.4?
-
- Can you check if this is a regression since 1.7.4?
-
- In the new symbology mode, at least in 1.8.0, several classification modes render negative real values as though they...
-
- fixed in r309. I have splitted the algorithm, since one of the params only applies when using the to_attr option
2012-07-24
-
01:43 AM Bug report #4303: Plugin installer: error if high-ASCII in path
- Still doesn't work in the 1.8.0 version (and MASTER version)
-
- Subject says it all!
-
01:21 PM Bug report #4076: Hanging on trying to use --snapshot option from command line
- Today, I tried to generate snapshots on two different computers, both with Windows XP and QGIS 1.8.0 installed. On bo...
-
- In the old labeling engine, it is possible to set the rotation field without having x and y fields in the attribute t...
-
- Giovanni, the new Freeze/Thaw label tool will handle the need for populating the attribute tables with x, y and rotat...
-
- This is a problem on gnome, the composer does not receive a show event when visible (because to make project loading ...
-
03:47 AM Feature request #6088 (Open): Allow selected rows only when running the Interpolation plugin
- no data rows influence the interpolation result. In some cases there are data points that have NULL values that shou...
2012-07-23
-
- Nathan, loving all of the new functions you've recently added in the expression builder. The CASE / CASE ELSE additio...
-
- If I save a composer, close the project and then open it again, it forgets the settings for render preview - cache.
I... -
- seems duplicate of #4806 (?)
-
06:43 AM Bug report #6084 (Closed): Raster Min Max Value Error
- I start my analysis with a raster (GeoTIFF) that derives from SAGA Kernel Density tools (min:5.37148e-11 max: 0.07829...
-
06:27 AM Bug report #6082: QGis download Malicious Virus check result
- Like all antivirus sites, it is quite vague about what maliciousness is present, but it reports 2 warnings.
One for t... -
- Dieter De Paepe wrote:
> You misunderstand, it is the site garyshood.com itself that is being reported as malicious b... -
- You misunderstand, it is the site garyshood.com itself that is being reported as malicious by Trendmicro, not the ins...
-
- probably false positive: http://www.garyshood.com/virus/results.php?r=dea6d81b0f15768d7ccca95f1b5f9e18
-
- probably false positive: http://www.garyshood.com/virus/results.php?r=dea6d81b0f15768d7ccca95f1b5f9e18
-
- This is not a bug per se, but it felt important enough to report.
The "Virus check results" link found on the "downl... -
- When editing a shapefile containing edges, the resulting datastore cannot be read completely by the Geotools java lib...
-
- Maxim, can you confirm if in your case it is a matter of having labels enabled or not?
-
- Maxim, can you confirm if in your case it is a matter of having labels enabled or not?
-
2012-07-22
-
01:03 AM Feature request #6081: Allow manually change project CRS from project properties when OTFR is OFF
- Sorry for the typo in the title: "preocious" -> "previous"
-
- It's not easy to explain :)
I have EPSG:4326 as default CRS, with OTFR activated. I change the CRS (e.g. select EPSG:... -
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- fixed in commit:d66c3072
-
- Fixed in changeset commit:"d66c3072a8e15db20cb47fd1bf8dfe540d6ce31e".
-
- Fixed in changeset commit:"d66c3072a8e15db20cb47fd1bf8dfe540d6ce31e".
-
- Agus,
See if you can just change the title a bit for the issue. I tested on 10.7.4 with Kyngchaos.com 1.8.0-2 and co... -
- implemented in commit:fe4026a
-
- implemented in commit:fe4026a
-
- On qgis-dev,
the WMS provider allow to define the feature_count as the max number of information retrieval with a Get... -
04:14 AM Bug report #4211: Enhancement: make "actions" tab more consistent and less confusing
- I agree the action UI still feels cluttered. I like New_mockup_1 the most as it is a clean and removes the cluttered...
-
- Fixed in changeset commit:"7a9074f8fc7c708019de90ca546aa68ca9508177".
2012-07-21
-
- I have the same problem when I try to generate snapshots of a series of vector maps from a batch file (and also with ...
-
- Unselecting OfflineEditing in Plugins/Manage Plugins solves the problem.
Confirmed that selecting it again causes the... -
- alobo, *please give more details*. From the crash report it looks like you were using the 'Offline Editing' plugin. C...
-
- QGIS 1.8 crashes upon exit on Mac OS 10.7.4
crash report attached -
- Hi,
I guess the field calculator are two useful function that actually miss from field-calculator.
I know there is s... -
- But the issues occur when using built-in features of QGIS, not when using the plugin.
-
04:01 AM Bug report #5155: memory layer attribute fields are combined when a memory layer or columns in a ...
- Maybe it does not identify correctly layers (not using id but name for example.. )
2012-07-20
-
05:58 AM Bug report #2947 (Reopened): GRASS plugin mapset permission blocks use if user doesn't own PERMANENT
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- I redid the test from a few months ago (then on 1.7.4), and I still get a warning window (screen shot attached) as fo...
-
- > I tried to reproduce with new memory layers from "new memory layer plugin" and I could not reproduce
Ah, yes. I d... -
- I tried to reproduce with new memory layers from "new memory layer plugin" and I could not reproduce. Could this be a...
-
- with empty tables that don't have a specific geometry type and/or you have to specify the expected geometry type with...
-
- with empty tables that don't have a specific geometry type and/or you have to specify the expected geometry type with...
-
04:17 AM Bug report #6074 (Closed): Using QgsDataSourceURI to load a PostGIS table causes error if query r...
- I am using the following code to load a vector layer from a PostGIS table:...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
- Rasters are being overhauled in master, do not expect to things work (at least for a while). Tagging this a regressio...
-
02:57 AM Bug report #6072 (Closed): QGIS Master crashes when adding a raster from a GRASS Mapset
- QGIS-dev crashes everytime I try to add a raster map from any Mapset. (tried with 5 different Mapsets and Locations t...
-
- Patch supplied only deals with WIN32. SInce we Have Win 64 also, is that patch OK for all windows versions?
2012-07-19
-
11:10 PM Bug report #6071: Projection EPSG: 3909 isn't available in projections database
- WKT Specification for MGI 1901 / Balkans zone 7
http://georepository.com/crs/wkt/id/3909
-
- Projection EPSG: 3909 isn't available in projections database. Same projection is available vio OSGEO4W shell with gd...
-
- with new version of Qgis 'Master' I have an similar error with message as in in atachment( also error with qgis_core....
-
- Click on the button "Add values from display" to transparent pixellist, Qgis lost focus as the active program.
Return... -
08:57 AM Bug report #6068 (Closed): User speficied settings not portable with [--configpath] boot option u...
- There seems to be a bug with the [--configpath] boot option when porting QGIS 1.8 to a flash drive. QGIS can be start...
-
07:19 AM Bug report #6065: labelling font size selector does not work plus the size always revert to 8
- reproduced the issue with QGIS sample data (grassland.shp)
additional windows info:
> windows 7 professional, servi... -
- Can't confirm on Linux Mint, Windows 7, or Windows 8
-
- This issue is similar to #4981 in 1.7.4.
In labelling, the size of the font can be selected in two places, in the "l... -
- Slight improvement again.
Note: this is kind of modelled on the symbol properties dialog, so if that changed signific... -
- On another note, there's an inconsistency that in other parts of the gui a "..." button is used to open the expressio...
-
- Fixed for composer map id in b299e0893c84eccc66116c898f2508eb9adc8b6e including unit test.
For the sting ids, it curr...
2012-07-18
-
- slightly better version
-
- > it's partially fixed.
For the benefit of future readers: the more confusing aspects of this dialog have been elim... -
- > it's partially fixed.
For the benefit of future readers: the more confusing aspects of this dialog have been elim... -
- Fixed in changeset commit:"cb1e7d3f6b0864d1b448b52e7ccb49faaad20f63".
-
05:07 AM Bug report #6060 (Closed): QGIS 1.8 Split Features doesn't work as in 1.7
- Hi,
I have a postgres table of lines (see attachment).
In QGIS 1.7 I can split them perfectly.
In QGIS 1.8 I can d... -
09:03 AM Feature request #6064 (Open): define new or edit existing colorbrewer schemes
- Hi,
to define new colorbrewer schemes, like Spectral, Set2, etc it is currently necessary to edit /src/core/symbolog... -
08:11 AM Bug report #6063 (Closed): ftools "Convex hull(s)": wrong attributes in output
- When creating convex hulls from a point layer (.shp) based on a common attribute ("create convex hulls based on input...
-
- Do this:
* select a map on composer
* ctrl-c
* ctrl-v
Add a new map and set try to set it as an overview map. You w... -
06:35 AM Bug report #6056: Cannot load WCS layers
- To clarify: the gvSIG test was without authentication. As far as I know gvSIG does not support authentication.
2012-07-17
-
- Available starting from commit:fe2252de5e
-
- Available starting from commit:fe2252de5e
-
-
12:22 AM Bug report #6057: QGIS 1.8 Encoding problem with Bulgarian characters CP1251
- QGIS build from NextGIS (http://nextgis.ru/en/nextgis-qgis/) works correctly.
-
-
- Seems duplicates #5255
-
- With new QGIS version - 1.8 all Bulgarian users have a problem to read attribute data encoded with Bulgarian characte...
-
03:11 PM Bug report #6036: sub-menu item is sometimes not avalaible
- I'm using unity 3D. I'm off this week but I'll try with unity-2d later and let you know
-
01:24 PM Feature request #6059 (Closed): add the ability to select character code when creating a new shap...
- When creating new shape file, we can't select character code set.
We must create all new files in the UTF-8 .
There ... -
12:14 PM Bug report #6058 (Closed): GPS Tools freeze QGIS
- I'm trying to download data from a Garmin GPSMAP 60CS with the GPS Tools and I'm faced with a strange and erratic beh...
-
09:41 AM Bug report #5269: New fields created by "table join" are limited to 80 characters when it should ...
- This bug remains in QGIS 1.8 and think it's urgent to fix it.
-
- This bug remains in QGIS 1.8 and think it's urgent to fix it.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- I have also seen this issue using Mapserver. If I remove authentication (basic http auth) it works as expected.
-
- When trying to load WCS layers from the server, I always get the "The layer is not a valid layer and can not be added...
-
- Yes, it's a regression. QGIS <= 1.7 used to warn at exit, if there were any unsaved changes in layers (I mean the lay...
-
- Hi Borys, is this a regression? If yes please tag the ticket as blocker.
2012-07-16
-
- The title is self-explaining
Also available in: Atom