Activity

From 2012-03-08 to 2012-04-06

2012-04-06

01:26 PM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
Thank you for clarifying further. I guess we can close this ticket. Volker Fröhlich
05:49 AM Bug report #5330 (Closed): Join: Null data handling different for a joint column than for a norma...
Using the attached data (data is from GADM, I hope using it here does not violate redissemination rules...):
* Load ...
mlennert -
03:37 AM Bug report #5329 (Closed): wrong ellipsoid semi-minor axis calculation inside QgsDistanceArea
Fixed in commit:55d92681d7eef2
Thanks
Nathan Woodrow
03:37 AM Bug report #5329 (Closed): wrong ellipsoid semi-minor axis calculation inside QgsDistanceArea
Fixed in commit:55d92681d7eef2
Thanks
Nathan Woodrow
03:20 AM Bug report #5329 (Closed): wrong ellipsoid semi-minor axis calculation inside QgsDistanceArea
In Qgis the semi-minor axis of the ellipsoid is calculated [1] with:
b = a - (f/a)
where
b = semi-minor axis
a = se...
Giovanni Allegri

2012-04-05

01:00 AM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
Jef is right. We cannot get around it without some terrible hack, like checking version of installed GRASS and then c... Radim Blazek
10:04 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
I think you both are right. jef technically, Giovanni from user viewpoint. But the 'confusion' comes from the fact th... Richard Duivenvoorde
01:14 PM Bug report #5326 (Feedback): Checking "on the fly CRS transformation" changes silently the select...
I'll tag this as feedback for myself, to remember me to leave feedback or close after studying the other ticket. Giovanni Manghi
01:13 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...

> The project CRS defines which CRS the canvas shows - but only if OTFR is on. Otherwise it's not used, IOW meaning...
Giovanni Manghi
12:40 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
Giovanni Manghi wrote:
> > Without OTFR the project CRS is meaningless

> sorry, I don't understand this statement
...
Jürgen Fischer
12:27 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
Hi Jurgen
Jürgen Fischer wrote:
> Without OTFR the project CRS is meaningless
sorry, I don't understand this statem...
Giovanni Manghi
12:16 PM Bug report #5326: Checking "on the fly CRS transformation" changes silently the selected CRS (usu...
Without OTFR the project CRS is meaningless and without any layers there nothing else and WGS84 is just the default C... Jürgen Fischer
12:01 PM Bug report #5326 (Closed): Checking "on the fly CRS transformation" changes silently the selected...
Tested on QGIS master on both Linux and Windows.
Richard, I'll give the ticket to you because if I'm not wrong you ...
Giovanni Manghi
01:56 PM Bug report #5328 (Closed): SPIT - Geometry type does not match column type
If I use the SPIT plugin to import polygon features in PostGIS I get this:... Salvatore Larosa
12:13 PM Bug report #5327 (Closed): Nodetool partially broken on qgis-master
in this video, strange behavior nodetool: http://youtu.be/Z4cUn3-xx6E... Alexander Novoselov
12:12 PM Bug report #5169 (Closed): QGIS crashes on startup on 64 bit Ubuntu
Marco and nirvn, if you have still evidence of this issue please reopen. Giovanni Manghi
12:12 PM Bug report #5169 (Closed): QGIS crashes on startup on 64 bit Ubuntu
Marco and nirvn, if you have still evidence of this issue please reopen. Giovanni Manghi
12:10 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
This seems to have resolved itself. I tried logging in with Unity2D rather than normal Unity and QGIS worked. Then ... Simon Coffey
11:38 AM Bug report #5323: WMS issues on QGIS Master
I tested packages of self compiled qgis-master from 3/4 days ago and it works as expected. Giovanni Manghi
09:57 AM Bug report #5323: WMS issues on QGIS Master
I confirm this "erratic" behaviour also on Windows/osgeo4w. Giovanni Manghi
09:20 AM Bug report #5323 (Closed): WMS issues on QGIS Master
Just installed/updated qgis-master on two Ubuntu 11.10 machines.
When adding a WMS layer it doesn't show anymore how...
Giovanni Manghi
11:33 AM Bug report #5325 (Closed): Adding a new layer to a project makes QGIS zoom to full extent
Tested on QGIS master on both Windows and Linux (with vectors). Giovanni Manghi
11:30 AM Bug report #5317 (Feedback): Layers not turning off in layer control when multiple layers selected
I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it... Giovanni Manghi
11:30 AM Bug report #5317 (Feedback): Layers not turning off in layer control when multiple layers selected
I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it... Giovanni Manghi
11:30 AM Bug report #5317 (Feedback): Layers not turning off in layer control when multiple layers selected
I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it... Giovanni Manghi
11:30 AM Bug report #5317 (Feedback): Layers not turning off in layer control when multiple layers selected
I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it... Giovanni Manghi
11:30 AM Bug report #5317 (Feedback): Layers not turning off in layer control when multiple layers selected
I can confirm the issue just on Windows. On Linux works as expected. Can you give it a try on linux and confirm if it... Giovanni Manghi
03:10 AM Bug report #5317 (Closed): Layers not turning off in layer control when multiple layers selected
If I select multiple layers in layer control, it will not turn them all off. It seems to be unpredictable as to which... James Stott
11:08 AM Bug report #5318: Snapping options dialog broken
Confirmed also on linux. No layers do show in the "snapping options" dialog. Giovanni Manghi
11:08 AM Bug report #5318: Snapping options dialog broken
Confirmed also on linux. No layers do show in the "snapping options" dialog. Giovanni Manghi
11:08 AM Bug report #5318: Snapping options dialog broken
Confirmed also on linux. No layers do show in the "snapping options" dialog. Giovanni Manghi
11:08 AM Bug report #5318: Snapping options dialog broken
Confirmed also on linux. No layers do show in the "snapping options" dialog. Giovanni Manghi
03:17 AM Bug report #5318 (Closed): Snapping options dialog broken
When accessing the snapping options menu, the vector layers from the project are not shown in the dialog so I cannot ... James Stott
07:32 AM Feature request #5315 (Closed): allow a layer to have relative coordinates
aperi2007 -
07:13 AM Bug report #5322: ODBC connection window queries all database content
partially answering to myself , ogr does support odbc SQLTables() : [http://www.osgeo.org/pipermail/gdal-dev/2009-Oct... Regis Haubourg
07:04 AM Bug report #5322: ODBC connection window queries all database content
I forgot to check "causes crach" checkbox.. Not true, but freezes Qgis until OGR as read every single line in all dat... Regis Haubourg
07:02 AM Bug report #5322 (Closed): ODBC connection window queries all database content
Hi all,
odbc interface in QGis does "SELECT * from mytable" for *ALL* tables when trying to collect table list, jus...
Regis Haubourg
06:28 AM Bug report #5303: SQL Server new provider , select fails
The problem comes from a column in uniqueIdentifier. The only format for the key seems to be integer. Eric Mariage
06:13 AM Feature request #4124: Add support for wfs 1.1.0
Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat...
Anita Graser
06:13 AM Feature request #4124: Add support for wfs 1.1.0
Some work seems to have happened in trunk, but WFS 1.1.0 layers still don't display.
e.g. http://data.wien.gv.at/dat...
Anita Graser
05:11 AM Bug report #5321 (Closed): Inserting geometries using a WFS-T of ArcGIS Server
If point geometries are inserted, which results in an error: "Error: An object is not inserted"
*Error response:*
<ow...
Falk Strobach
04:35 AM Feature request #5319 (Feedback): Performance issues with new symbology and levels
sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information... Giovanni Manghi
04:35 AM Feature request #5319 (Feedback): Performance issues with new symbology and levels
sorry I didn't see that #3388 was already closed. Anyway you will need to provide sample data and further information... Giovanni Manghi
04:32 AM Feature request #5319 (Closed): Performance issues with new symbology and levels
duplicate of #3388 Giovanni Manghi
04:32 AM Feature request #5319 (Closed): Performance issues with new symbology and levels
duplicate of #3388 Giovanni Manghi
04:29 AM Feature request #5319 (Closed): Performance issues with new symbology and levels
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbology with levels, QGis gets...
cremat0rio -
04:33 AM Bug report #3388: Performance issue with new symbology

> QGis gets very slow and only uses one thread (it seems so), wich is strange nowadays with multicore processors.
f...
Giovanni Manghi
04:26 AM Bug report #3388: Performance issue with new symbology
I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog...
cremat0rio -
04:26 AM Bug report #3388: Performance issue with new symbology
I have the same problem.
I'm using QGis 1.7.3 (the same happens on 1.7.1).
With a polygon layer, and the new symbolog...
cremat0rio -
03:16 AM Bug report #5133: Error in high resolution exports with transparent rasters
I haven't test on win XP with v1.7.4. I prefer you wait (as soon as possible).
Thx
Alexis Viaud
03:07 AM Bug report #5133 (Feedback): Error in high resolution exports with transparent rasters
Alexis Viaud wrote:
> Up!
> The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels ...
Giovanni Manghi
03:00 AM Bug report #5133: Error in high resolution exports with transparent rasters
Up!
The new LTS version is the 1.7.4. Tested on ubuntu 10.10 pc64 it work. No line of pixels anymore, but still betwe...
Alexis Viaud
02:41 AM Bug report #5316 (Closed): MS SQL should return default values from provider
The provider should return the default value for a column using QgsVectorDataProvider::defaultValue(int).
See Postgr...
Nathan Woodrow
02:23 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Even I guess this is an error in the vector provider.
I tested the operation in other GIS software and the result is ...
Salvatore Larosa

2012-04-04

01:31 AM Bug report #5241: WFS client does not work anymore with Geoserver
Thanks Bill! Giovanni Manghi
01:31 AM Bug report #5241: WFS client does not work anymore with Geoserver
Thanks Bill! Giovanni Manghi
03:59 PM Bug report #5241: WFS client does not work anymore with Geoserver
This error was introduced by the patch for bug 4604, which sends a DescribeFeatureType request that contains extraneo... Bill Clay
12:18 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Probably the problem lies in the vector provider Paolo Cavallini
10:55 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Alexander Bruy wrote:
> Not sure that this is fTools problem. As I said before, Field Calculator (core functionality)...
Giovanni Manghi
10:31 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Not sure that this is fTools problem. As I said before, Field Calculator (core functionality) also don't work with su... Alexander Bruy
03:37 PM Bug report #5157 (Closed): Areas should be in expressed as m² or km², not m2 or km2"
fixed in commit:25988d67 Jürgen Fischer
03:37 PM Bug report #5157 (Closed): Areas should be in expressed as m² or km², not m2 or km2"
fixed in commit:25988d67 Jürgen Fischer
03:12 PM Bug report #5284 (Closed): MS SQL features disappear if SQL errors on insert
Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789. Jürgen Fischer
03:12 PM Bug report #5284 (Closed): MS SQL features disappear if SQL errors on insert
Fixed in changeset commit:4a9e8ccb862225b73b89297d6467caf9f1bc0789. Jürgen Fischer
02:10 PM Bug report #5284: MS SQL features disappear if SQL errors on insert
Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511 Tamas Szekeres
03:11 PM Bug report #5283 (Closed): MS SQL provider doesn't save data or datetime
Fixed in changeset commit:"4a9e8ccb862225b73b89297d6467caf9f1bc0789". Tamas Szekeres
02:09 PM Bug report #5283: MS SQL provider doesn't save data or datetime
Fixed in https://github.com/szekerest/Quantum-GIS/commit/4fea2c7047cc4fbf0ce5a4da37e584de3dedd511 Tamas Szekeres
01:39 PM Feature request #5315 (Closed): allow a layer to have relative coordinates
I guess a useful enhancement could be the option for the layers in the properties to choose the coordinate of the
ge...
aperi2007 -
01:23 PM Feature request #5314 (Open): Add the acetate layer to qgis and qgis-server
A really useful enhancement for qgis (and obviously qgis-server)
could be the capability to define an "Acetate Layer"...
aperi2007 -
12:19 PM Bug report #5311 (Closed): remove the "-s" option (used silently) in "r.to.vect.area" and/or add ...
"-s Smooth corners of area features" Giovanni Manghi
12:16 PM Bug report #5310 (Closed): Allow the nviz module to select more than one raster map (for elevation)
The native GRASS gui/module allows it and the elevation maps can be viewed at the same time in the nviz interface. Giovanni Manghi
12:14 PM Bug report #5308 (Closed): Add the r.info module
it returns interesting/useful infos on raster maps Giovanni Manghi
12:13 PM Bug report #5307 (Closed): r.patch do not allow selecting multiple raster maps as input
Subject says it all. Without this option the module is useless. Giovanni Manghi
12:07 PM Bug report #5306 (Closed): r.lake.xy does not allow pasting coordinate into the "seed coordinate ...
Tested with the coordinate capture point tool, on both Windows and Linux. In the similar r.los module pasting the coo... Giovanni Manghi
10:40 AM Bug report #5305 (Closed): svg fill symbols are presented in a wrong way
See the attached image. Does not happen for point symbols. Tested on master. Giovanni Manghi
09:25 AM Bug report #5304 (Rejected): Google layers plugin won't load
Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b... Giovanni Manghi
09:25 AM Bug report #5304 (Rejected): Google layers plugin won't load
Google layers plugin is a 3rd party one (so in any case you be needed to file a ticket in the proper section of the b... Giovanni Manghi
09:22 AM Bug report #5304 (Rejected): Google layers plugin won't load
I updated to 1.7.4 and the first time I ran it gave me the following error (see screen shot).
pope965176 -
08:59 AM Bug report #5303 (Closed): SQL Server new provider , select fails
Using the new SQL server provider with geometry table, it's not possible to have the attribut datas in the window 'at... Eric Mariage
08:21 AM Bug report #5302 (Closed): SQL Server new provider doesn't work with geography table
The new provider is able to adress geometry Sql server 2008 tables.
No features is loaded when we try to use geograph...
Eric Mariage
06:00 AM Feature request #4918: Bring out of raster properties the "contrast enhancement" and "standard de...
I withdraw my comment: the problem with the 0,0 range resulting
from applying the STD option is not related to the nu...
alobo -
05:33 AM Feature request #4918: Bring out of raster properties the "contrast enhancement" and "standard de...
According to what I'm seeing, is not only that the "save" (disquette) button is not
present for single band raster la...
alobo -
04:03 AM Bug report #5240 (Closed): Show all layers/Hide all layers changed behaviour in QGIS master
fixed with the same fix for #5013 Giovanni Manghi
04:03 AM Bug report #5240 (Closed): Show all layers/Hide all layers changed behaviour in QGIS master
fixed with the same fix for #5013 Giovanni Manghi
02:47 AM Feature request #5301 (Closed): Save as image do not export text annotations
When you use "Save as Image" dialog to export your map as an image file, text annotations are not incorporated in the... Médéric RIBREUX

2012-04-03

08:37 PM Bug report #5257: fTools 'Define current projection' problem
Confirmed (Fedora 14 x 64 / 1.9.90-Alpha, 927dcbd). The configuration files were removed before opening QGIS (~/.qgis... zirneklitis -
07:31 AM Bug report #5257: fTools 'Define current projection' problem
Confirmed here, current trunk on debian testing Paolo Cavallini
02:34 PM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
Jürgen Fischer wrote:
> But that might also be an issue for different versions of gcc on Linux - waiting for the nigh...
Jürgen Fischer
11:19 AM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
The project file loading optimization was not working anymore. I suppose commit c0b720805b5f21b4fc8cb108682b8e8a325e4... Marco Hugentobler
10:44 AM Bug report #5285 (Closed): NoData value should not be considered when classifying a raster
Paolo Cavallini
10:42 AM Bug report #5285: NoData value should not be considered when classifying a raster
You're right, sorry 'bout that. I evidently don't have permission to close it, can someone go ahead and do that? mattwigway .
08:28 AM Bug report #5285 (Feedback): NoData value should not be considered when classifying a raster
probably duplicate of #1380. Please check and confirm. Giovanni Manghi
10:24 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
The file comes from a geoMedia export, so this may be the root of the problem. Paolo Cavallini
10:23 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Apparently, the error occurs when the SHP is 3D MultiPoint.
If you convert SHP geometries from 3DMultiPoint to Point,...
Paolo Cavallini
08:50 AM Bug report #5293: fTools doesn't work properly on MultiPoint geometry
Field Calculator also can't create columns with X and Y for this dataset Alexander Bruy
08:48 AM Bug report #5293 (Closed): fTools doesn't work properly on MultiPoint geometry
Add geometry columns command does not work, as it returns two columns filled with 0s. See attached sample. Paolo Cavallini

2012-04-02

12:27 AM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
William Kyngesburye wrote:
> That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX...
Jürgen Fischer
05:01 PM Bug report #3999: [OsX] GRASS provider doesn't load on OS X
That --no-undefined flag is causing trouble. The OS X ld does not have that option (OSX ld is a custom job), but it ... William Kyngesburye
01:30 PM Bug report #3999 (Feedback): [OsX] GRASS provider doesn't load on OS X
does commit:9e57e20f61d help on OSX? Jürgen Fischer
01:29 PM Bug report #3999 (Closed): [OsX] GRASS provider doesn't load on OS X
Fixed in changeset commit:"9e57e20f61d025132f5b44f60a892e7263043661". Jürgen Fischer
11:46 PM Bug report #5272: Symbol level dialog causes QGIS crash
Hi,
I renamed .qgis folder but never has changed. I think the problem is not depending on some plugin.
Under Qgis 1.7...
Alessandro Ciali
09:18 AM Bug report #5272: Symbol level dialog causes QGIS crash

> Perhaps some other conditions or global setting on qgis to do it ?
please check if there is any 3rd party plugin ...
Giovanni Manghi
11:24 PM Bug report #5285 (Closed): NoData value should not be considered when classifying a raster
When classifying a raster or when calculating min and max, the NoData value (on the transparency tab) should be ignor... mattwigway .
09:59 PM Bug report #5284 (Closed): MS SQL features disappear if SQL errors on insert
If you are saving a feature and the database fails to insert due to a SQL error the feature will disappear with no er... Nathan Woodrow
09:50 PM Bug report #5283 (Closed): MS SQL provider doesn't save data or datetime
When using a table with a date field, trying to save the record back the feature is removed from the map canvas and t... Nathan Woodrow
04:42 PM Bug report #5282: crssync not executed in debian postinst nor when "make install" is run
Jurgen - thanks
please consider this patch which adds CRS_SYNC[=TRUE] option. After installing *.db files, crssync i...
Etienne Tourigny
03:28 PM Bug report #5282 (Closed): crssync not executed in debian postinst nor when "make install" is run
- call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r...
Jürgen Fischer
03:28 PM Bug report #5282 (Closed): crssync not executed in debian postinst nor when "make install" is run
- call in postinst added in commit:1011198 and commit:520e488.
- AFAIK there won't be another release of 1.7
- only r...
Jürgen Fischer
02:51 PM Bug report #5282 (Closed): crssync not executed in debian postinst nor when "make install" is run
the new crssync utility is not run in key moments - debian installs and 'make install'. It is important that it be ex... Etienne Tourigny
02:35 PM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
Marco Hugentobler wrote:
> This is probably related to the optimizations I did about a month ago (speed up of loading...
Giovanni Manghi
02:28 PM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
Fix ok!
Thanks!
Salvatore Larosa
01:13 PM Bug report #5013 (Closed): Unchecking a group in TOC unchecks all layers in it, but layers are no...
Should be fixed in master 9e15906f063a4947324b68c94ff65e1e9c4e05c1. Please test and reopen if not. Marco Hugentobler
06:52 AM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
This is probably related to the optimizations I did about a month ago (speed up of loading projects). Marco Hugentobler
12:35 PM Bug report #5161: Updating GEOS library to 3.3 on OSGeo4w
gespiel - wrote:
> Hello,
>
> in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
> QGI...
Giovanni Manghi
10:41 AM Bug report #5161: Updating GEOS library to 3.3 on OSGeo4w

Hello,
in the OSGeo4W online installer under libs, version 3.2.1 is shown as installed.
QGIS-Master reports under "...
Gerhard Spieles
09:16 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
Jürgen Fischer wrote:
> a bit vague. Did you check that the source and destination CRSes are picked up correctly?
H...
Giovanni Manghi
08:25 AM Bug report #5257: fTools 'Define current projection' problem
Giovanni Manghi wrote:
> > Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows ...
elcuco -
08:02 AM Bug report #5257: fTools 'Define current projection' problem

> Well, this error occurred in several new and clean installations of QGIS 1.7.4 in windows computers.
it depends o...
Giovanni Manghi
07:58 AM Bug report #5257: fTools 'Define current projection' problem
Giovanni Manghi wrote:
> I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis ...
elcuco -
07:53 AM Bug report #5257: fTools 'Define current projection' problem
I have noticed that sometimes some old "configuration" of ftools remain stored in the .qgis folder, and removing it m... Giovanni Manghi
07:51 AM Bug report #5257: fTools 'Define current projection' problem
elcuco - wrote:
> Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The ...
Alexander Bruy
07:43 AM Bug report #5257: fTools 'Define current projection' problem
Here it goes the shapefile that i'm trying to get fTools 'Define current projection' to work. The CRS that I whant i... elcuco -
07:20 AM Bug report #5257: fTools 'Define current projection' problem
Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
Not reproducible here with lat...
Alexander Bruy
07:04 AM Bug report #5257 (Feedback): fTools 'Define current projection' problem
Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample...
Giovanni Manghi
07:04 AM Bug report #5257 (Feedback): fTools 'Define current projection' problem
Filipe Dias wrote:
> This is not fixed in QGIS 1.7 and QGIS Master (downloaded today)
can you please attach a sample...
Giovanni Manghi
02:23 AM Bug report #5257: fTools 'Define current projection' problem
This is not fixed in QGIS 1.7 and QGIS Master (downloaded today) Filipe Dias
05:43 AM Bug report #5259: moving polygon individual nodes broken in qgis master, end up moving two nodes ...
Confirmed! And same laziness here....
In the same vein, still in "node tool" mode, click on the polygon to select it...
Benoit de Cabissole

2012-04-01

12:59 AM Feature request #5278 (Open): Please add WPS backend
See the WPS client plugin Paolo Cavallini
12:19 AM Bug report #5273 (Closed): Trunk doesn't build with gcc 4.7
fixed in commit:c29fb5a and commit:8ae7651 Jürgen Fischer
12:19 AM Bug report #5273 (Closed): Trunk doesn't build with gcc 4.7
fixed in commit:c29fb5a and commit:8ae7651 Jürgen Fischer
02:37 PM Bug report #5252: MSSQL Estimated table parameter is not used
Thanks. Can this stuff be backported to 1.8? Jeremy Palmer
01:10 PM Bug report #5252 (Closed): MSSQL Estimated table parameter is not used
Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77". Tamas Szekeres
12:57 PM Bug report #5252: MSSQL Estimated table parameter is not used
Fixed in [email protected]:szekerest/Quantum-GIS.git Tamas Szekeres
01:10 PM Bug report #5227 (Closed): Can't read linstring table from new MSSQL provider
Fixed in changeset commit:"51011559c4d7cdb5a11e50cae23a20b688df2b77". Tamas Szekeres
12:57 PM Bug report #5227: Can't read linstring table from new MSSQL provider
Fixed in [email protected]:szekerest/Quantum-GIS.git Tamas Szekeres
05:23 AM Feature request #5276 (Closed): New Symbology: allow transparency separately for fill and border ...
Hi,
actually the transparency il allowed to set in the main layer propertier for all the layer.
This chhose is ok whe...
aperi2007 -
05:09 AM Bug report #5272: Symbol level dialog causes QGIS crash
I try using the
qgis-dev commit:157541e (01/04/2012)
(very nice the
Using the shapefile given opening the propertie...
aperi2007 -

2012-03-31

12:14 AM Bug report #5272: Symbol level dialog causes QGIS crash
step 1: load data with legend loaded as default in QGIS Master
step2: open properties dialog for layer RU_st018poly
s...
Alessandro Ciali
07:42 AM Bug report #5272 (Feedback): Symbol level dialog causes QGIS crash
cannot replicate here, can you please attach sample data and exact steps? thanks. Giovanni Manghi
06:44 AM Bug report #5272 (Closed): Symbol level dialog causes QGIS crash
Attemping to access to symbol level dialog from layer properties of a polygon shape layer causes QGIS crash.
Alessandro Ciali
07:24 PM Bug report #5183: Scale bar has wrong units for GeoJSON layer
This is not a bug--please close. Layers must be transformed/reprojected via Layer:Save As...
Adding this note as an...
Tony Bigbee
02:15 PM Bug report #5274: QGIS rebuild really necessary for new GRASS release?
The GRASS library checks itself. It probably has good reason not to trust its own ABI. Jürgen Fischer
01:48 PM Bug report #5274 (Closed): QGIS rebuild really necessary for new GRASS release?
I shipped a version of QGIS, that was built using GRASS 6.4.1. After updating to GRASS 6.4.2 without rebuilding QGIS,... Volker Fröhlich
12:37 PM Bug report #5235: Link to SQL server spatial view fails
James Perrins wrote:
> I don't think the join makes it non unique - as I say - it definitely works in map server - wo...
Tamas Szekeres
07:04 AM Bug report #5273 (Closed): Trunk doesn't build with gcc 4.7
Trunk doesn't build with gcc 4.7, but builds with 4.6.
In the first case it complains:
/builddir/build/BUILD/qgis-1...
Volker Fröhlich
04:15 AM Bug report #5264: Spatialite Provider / fTools Select by Location does not find intersections
I've uploaded a project for others to test. Liam Veitch

2012-03-30

01:54 PM Bug report #4977 (Closed): Wrong interpretation of Gauss-Krüger .prj files
Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap...
Jürgen Fischer
01:54 PM Bug report #4977 (Closed): Wrong interpretation of Gauss-Krüger .prj files
Etienne Tourigny wrote:
> The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not ap...
Jürgen Fischer
01:14 PM Bug report #4977: Wrong interpretation of Gauss-Krüger .prj files
The same patch applied to release-1_7_4 branch fixes the problem (the last hunk does not apply).
crssync must be cal...
Etienne Tourigny
12:51 PM Bug report #4977: Wrong interpretation of Gauss-Krüger .prj files
There is a problem in Master with the queries for the crs lookup, they return the deprecated value first, so that one... Etienne Tourigny
01:53 PM Feature request #4355: Performing deletion on layer with feature counts turned on should not cont...
ouch, 4355 is the attachment number of the patch to #4977 - so the association with this ticket is wrong. Jürgen Fischer
01:49 PM Feature request #4355 (Open): Performing deletion on layer with feature counts turned on should n...
Jürgen Fischer
01:43 PM Feature request #4355 (Closed): Performing deletion on layer with feature counts turned on should...
Etienne Tourigny
01:49 PM Bug report #5239: TIN interpolation causes crash
Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal...
Thomas Arnold
01:49 PM Bug report #5239: TIN interpolation causes crash
Hi,
could anybody check this solution?
I think it was a numerical problem. The value of the leftOfTresh was too smal...
Thomas Arnold
12:40 PM Bug report #5269: New fields created by "table join" are limited to 80 characters when it should ...
Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile. Giovanni Manghi
12:40 PM Bug report #5269: New fields created by "table join" are limited to 80 characters when it should ...
Confirmed (on Linux). Joined text field (tested with a csv) are truncated at 80 chars when (re)saving the shapefile. Giovanni Manghi
03:44 AM Bug report #5269 (Closed): New fields created by "table join" are limited to 80 characters when i...
I tried to join a field that had cells with up to 220 characters to a shapefile. However when I saved the new shapefi... Filipe Dias
06:09 AM Bug report #5013: Unchecking a group in TOC unchecks all layers in it, but layers are not removed...
I confirm that the issue still persists! Salvatore Larosa
05:48 AM Feature request #1442: system specific location of qgis settings
Hi all,
my admin sys asks me to deport .qgis under Application Data to comply with Windows profile replication tools...
Regis Haubourg
03:53 AM Bug report #5235: Link to SQL server spatial view fails
I don't think the join makes it non unique - as I say - it definitely works in map server - wouldn't that have the sa... James Perrins
03:20 AM Bug report #5235: Link to SQL server spatial view fails
Are you sure the left outer join on the view definition doesn't affect the uniqueness of the MI_PRINX column?
If you ...
Tamas Szekeres
03:00 AM Bug report #5235: Link to SQL server spatial view fails
OK - a bit more...
This view works:
SELECT SiteCode, Geom AS MyGeom, MI_PRINX
FROM dbo.SitesGeom
In my...
James Perrins
02:31 AM Bug report #5235: Link to SQL server spatial view fails
James Perrins wrote:
> Yes - unique integer field is present.
>
> Same view works well in your mapserver sql2008 plu...
Tamas Szekeres
02:48 AM Bug report #5102: query ["field" != 'NULL'] works while ["field" = 'NULL'] doesn't
Hi
in my case (qgis 1.7.4.5 8058b22) I was trying to select non null features, values coming from a joined table fiel...
Pietro Rossin
02:39 AM Bug report #5264 (Closed): Spatialite Provider / fTools Select by Location does not find intersec...
fTools 'Select by Location' tool does not find intersecting geometry when using a Spatialite Layer.
Tested working f...
Liam Veitch

2012-03-29

01:37 AM Bug report #5235: Link to SQL server spatial view fails
Yes - unique integer field is present.
Same view works well in your mapserver sql2008 plugin
CREATE TABLE [dbo].[...
James Perrins
01:29 AM Bug report #5260 (Closed): Georeferencer causes QGIS to crash on exit
How to replicate:
Open QGIS (keep default CRS, WGS84 LatLon)
Open Georeferencer (Raster|Georeferencer)
Load an image ...
Benoit de Cabissole
09:27 PM Bug report #5259 (Closed): moving polygon individual nodes broken in qgis master, end up moving t...
Simple steps to reproduce the "disease":
1/ open qgis
2/ create a new (shapefile) vector layer
3/ switch the vector l...
Mathieu Pellerin - nIRV
11:19 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
Alexander Bruy wrote:
> Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization o...
Giovanni Manghi
11:18 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
Ok, but IMHO this is not an fTools issue. As I can see crash occurred during initialization of QgsVectorLayer object Alexander Bruy
10:52 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
Alexander Bruy wrote:
> So I think we can close this ticket and maybe open another about restoring previous default s...
Giovanni Manghi
07:55 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
When you choose the whole directory (default) the CRS selector dialog popups well for each shapefile in the directory... Aníbal Pacheco
07:10 AM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
Well, the problem is not in Merge shapefiles to one. And not in the lack of .prj file (at least this is not main issu... Alexander Bruy
11:07 AM Bug report #5257 (Closed): fTools 'Define current projection' problem
Fixed in changeset commit:"2abd900ed6f73d93866283c9c3dce191d451a686". Alexander Bruy
07:51 AM Bug report #5257 (Closed): fTools 'Define current projection' problem
Hi,
In QGIS 1.7.4, after I loaded a shapefile without a .prj file, I tried to use the fTools 'Define current projecti...
elcuco -
10:21 AM Feature request #5254: Support 3D GRASS vectors
Partly fixed with commit:287bebe961a9a0a91781a0cf4f7b4a034f75edc4
Thanks Radim.
Paolo Cavallini
08:17 AM Bug report #5258 (Closed): WMS layer properties should be updated upon visiting the 'layer proper...
I have a WMS server that is changing its data on an hourly basis and I'd like to always know what data is being shown... Ricardo Silva
07:20 AM Bug report #5256: QGIS polygon Centroid (NewLabeling bug etc)
I think the patch should work, but I have no way to verify this.
Does anyone can help with verification?
Serge Dikiy
07:15 AM Bug report #5256: QGIS polygon Centroid (NewLabeling bug etc)
See also #4634 Alexander Bruy
04:01 AM Bug report #5256 (Closed): QGIS polygon Centroid (NewLabeling bug etc)
In QGIS Core I find code looks like this:
http://pastebin.com/qRcAa9GC
I think it code must be
http://pastebin.com/k...
Serge Dikiy
07:14 AM Bug report #4634: [PATCH] New labelling engine: wrong label placement with both "around centroid"...
See also #5256 Alexander Bruy
03:18 AM Bug report #5255: Wrong codepage of shapefile
This is because 1.7.4 and master now compiled against GDAL 1.9.0. Alexander Bruy
03:09 AM Bug report #5255 (Closed): Wrong codepage of shapefile
When opening shapefiles, it doesn't matters what codepage You choose, it is always UTF-8 in QGIS 1.74, so polish lett... Stanislaw Kapustka

2012-03-28

12:58 AM Feature request #5254 (Closed): Support 3D GRASS vectors
Currently, 3D GRASS vectors cannot be loaded in QGIS. It would be useful to add a support to it, even if the results ... Paolo Cavallini
12:31 AM Bug report #5253 (Closed): labels min scale and max scale display
On shp layers, i setup the scale for label displaying.
It works, so i save my project
I quit the project, I quit Qg...
herve colas
10:55 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
FYI, I'm seeing the same crash as described by Marco on a 32-bit machine using the master ppa build. Mathieu Pellerin - nIRV
06:02 PM Bug report #5252 (Closed): MSSQL Estimated table parameter is not used
When loading the "Add MS Tables(s)" Dialog and connecting to a MSSQL database, determining the geometry type is very ... Jeremy Palmer
05:52 PM Bug report #5227: Can't read linstring table from new MSSQL provider
HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre...
Jeremy Palmer
05:52 PM Bug report #5227: Can't read linstring table from new MSSQL provider
HI Tamas,
Thanks for the fix on the PK.
I still seems to be having problem with this linestring dataset (http://cre...
Jeremy Palmer
05:54 AM Bug report #5227: Can't read linstring table from new MSSQL provider
should be working for now Tamas Szekeres
05:54 AM Bug report #5227: Can't read linstring table from new MSSQL provider
should be working for now Tamas Szekeres
03:53 PM Bug report #5251: if "Options -> CRS -> coordinate reference system for new layers" is set "promp...
Yes, it worked well for me too after setting the projection Aníbal Pacheco
02:51 PM Bug report #5251 (Feedback): if "Options -> CRS -> coordinate reference system for new layers" is...
The cause can be the lack of .prj files. I tested on Windows and it crashed at the first attempt, then I fixed the sh... Giovanni Manghi
11:45 AM Bug report #5251 (Closed): if "Options -> CRS -> coordinate reference system for new layers" is s...
Using master installed following https://issues.qgis.org/projects/quantum-gis/wiki/Download
Platform and platform ver...
Aníbal Pacheco
02:35 PM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
I can perform the operation you show in the video without any major issue, also selecting many features at one time. ... Giovanni Manghi
02:53 AM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
The sample data are in the ticket (https://issues.qgis.org/attachments/4348/shapefiles_merge_crashes.zip). That's my ... Gerald Fringeli
02:36 AM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
Gerald Fringeli wrote:
> This video shows a crash after a merging of 2 features.
> NB: In the video, qgis seems to re...
Giovanni Manghi
02:23 AM Bug report #5243: Shapefile - merging cause crashes in 1.7.4
This video shows a crash after a merging of 2 features.
NB: In the video, qgis seems to remain open, in reality it cl...
Gerald Fringeli
08:24 AM Feature request #5250 (Closed): Vector Style for Categorized and Graduated Legends
Hi,
When we want to make a legend of a graduated or categorized vector, we choose the option Graduated or Categorized...
elcuco -
08:13 AM Feature request #5249 (Open): No default Point geometry when creating a new Vector layer
Several times I have created a new *Point* layer (after setting 10 attributes) while what I wanted was to create a *P... Richard Duivenvoorde
07:39 AM Feature request #5248 (Closed): Blending modes (composition modes)
It would be a great addition to add blending modes for colors/layers. Blending modes such as multiply, color dodge, e... Pierre-Luc Auclair
07:14 AM Bug report #4945: Missing Krovak East North 102067 projection
I can confirm this for the version 1.7.4. It is a serious issue since it is not possible to force custom projections ... Jan Valenta
05:51 AM Bug report #5230 (Closed): qgis server: set the mssql driver ON/OFF with cmake configuration
Nathan Woodrow
02:12 AM Bug report #5235: Link to SQL server spatial view fails
James Perrins wrote:
> Same error with your latest build I'm afraid
Do you have an integer column with unique values...
Tamas Szekeres
02:08 AM Bug report #5247: setting the project to "google mercator" causes QGIS to crash
Giovanni Manghi wrote:
> I can replicate the issue also with the standalone version, but not with a simple project ma...
Giovanni Manghi

2012-03-27

01:13 AM Bug report #5247: setting the project to "google mercator" causes QGIS to crash
I can replicate the issue also with the standalone version, but not with a simple project made of one or few layers. ... Giovanni Manghi
01:05 AM Bug report #5247 (Closed): setting the project to "google mercator" causes QGIS to crash
It happens only on 1.7.4/osgeo4w, not with the standalone nor with master/osgeo4w.
Add a vector and set the project ...
Giovanni Manghi
12:37 AM Feature request #5246 (Open): When loading a project avoid loading of non active WFS layers
As it is now in both master and 1.7.4 if a project is saved with unchecked WFS layers, those are loaded anyway when t... Giovanni Manghi
11:36 PM Bug report #5223 (Closed): ftools Intersection fails to gathering all shapes

> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...
Giovanni Manghi
11:36 PM Bug report #5223 (Closed): ftools Intersection fails to gathering all shapes

> One quick question before I close out the ticket (or should I move it elsewhere?). I have never used GRASS but it ...
Giovanni Manghi
03:57 PM Bug report #5223: ftools Intersection fails to gathering all shapes
Thank you Giovanni. I just created a ticket http://trac.osgeo.org/geos/ticket/521 on the GEO web site. I hope I put ... John Lortscher
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
06:57 AM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi John
John Lortscher wrote:
> Hi Giovanni,
>
> I apologize ...
It is ok, now I also understand better the issu...
Giovanni Manghi
04:02 PM Bug report #5235: Link to SQL server spatial view fails
Same error with your latest build I'm afraid James Perrins
01:58 PM Bug report #5235: Link to SQL server spatial view fails
James Perrins wrote:
> I can try - is there a Windows build in there somewhere - or is it just source ?
>
> In which...
Tamas Szekeres
05:37 AM Bug report #5235: Link to SQL server spatial view fails
I can try - is there a Windows build in there somewhere - or is it just source ?
In which case presumably I need to ...
James Perrins
05:17 AM Bug report #5235: Link to SQL server spatial view fails
James Perrins wrote:
> A bit more information - hope this helps:
>
> OK - I set up a really simple view - I have a t...
Tamas Szekeres
03:57 AM Bug report #5235: Link to SQL server spatial view fails
A bit more information - hope this helps:
OK - I set up a really simple view - I have a table SitesGeom that is disp...
James Perrins
03:24 AM Bug report #5235: Link to SQL server spatial view fails
The error message should have of course been:
dbname='CMSI' host=JAMESP-THINK srid=27700 type=POLYGON table="dbo"."v...
James Perrins
02:33 PM Bug report #4063 (Reopened): georeferencer crash
Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated. Volker Fröhlich
02:33 PM Bug report #4063 (Reopened): georeferencer crash
Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated. Volker Fröhlich
02:33 PM Bug report #4063 (Reopened): georeferencer crash
Paolo, are you referring to the patch I mention? From what I see in the Git log, the root cause was not investigated. Volker Fröhlich
02:06 PM Bug report #2790: Python error moving nodes with OSM plugin
Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms. Mike Evans
02:06 PM Bug report #2790: Python error moving nodes with OSM plugin
Seems worse with 1.7.4, at least I can do some editing with 1.7.1. Both from Fedora rpms. Mike Evans
12:52 PM Bug report #5244 (Closed): Expressions: tostring() does not work as expected when the argument is...
As far as expression uses 3 logic states (true, false, null) the only way to print strings concatenated to a field is... Giuseppe Sucameli
09:27 AM Bug report #5243 (Feedback): Shapefile - merging cause crashes in 1.7.4
Hi, in the zip file there is only ONE shape. Giovanni Manghi
09:27 AM Bug report #5243 (Feedback): Shapefile - merging cause crashes in 1.7.4
Hi, in the zip file there is only ONE shape. Giovanni Manghi
09:27 AM Bug report #5243 (Feedback): Shapefile - merging cause crashes in 1.7.4
Hi, in the zip file there is only ONE shape. Giovanni Manghi
08:59 AM Bug report #5243 (Closed): Shapefile - merging cause crashes in 1.7.4
Crash when merging polygons. No warnings, no error message. The first mergers do not cause crashes. This only happens... Gerald Fringeli
06:02 AM Feature request #5242 (Closed): Open KMZ without needing to unzip
It would be awfully nice if we could import KMZ files directly, without needing to unzip and import the KML files. Andrew DeMerchant
03:57 AM Bug report #4567 (Closed): Ftools - Union returns Wrong Table of Attributes
Giovanni Manghi
03:44 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
I try to reinstall and update Qgis, both 1.7.4 and 1.9.90, and the problem presisted.
I uninstalled QGIS completly, ...
Alexandre Neto

2012-03-26

12:58 AM Bug report #5237: Update r.mapcalc to be compatible with the GRASS 7 new syntax
It may well work out of the box. It has to be checked when GRASS7 hits major distros. Paolo Cavallini
01:32 PM Bug report #5237 (Closed): Update r.mapcalc to be compatible with the GRASS 7 new syntax
http://pvanb.wordpress.com/2012/03/21/changes-in-the-r-mapcalc-syntax-in-grass-gis-7/
Giovanni Manghi
07:23 PM Bug report #5223: ftools Intersection fails to gathering all shapes
Hi Giovanni,
I apologize ... I accidentally switched "Counties" and "Places" in lines 4 and 5 of my description (cor...
John Lortscher
05:06 PM Bug report #5223 (Feedback): ftools Intersection fails to gathering all shapes
I'm sorry but if you select a feature in a layer and you do not mark "use only selected features" then is like using ... Giovanni Manghi
04:54 PM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
Etienne Tourigny wrote:
> adding a note that Jurgen added a fix for this in commit:c065736b71f856c22814d2f29f248b88e4...
Giovanni Manghi
04:47 PM Bug report #5241 (Closed): WFS client does not work anymore with Geoserver
Recently there have been reports of issues with WFS/Geoserver (there is another ticket that report a freezewith geose... Giovanni Manghi
03:54 PM Bug report #5240 (Closed): Show all layers/Hide all layers changed behaviour in QGIS master
Yet in QGIS 1.7.4 Show all layers/Hide all layers is fast lightining as all layers are switched off and on at the sam... Giovanni Manghi
03:48 PM Bug report #5239 (Closed): TIN interpolation causes crash
Tested on master and 1.7.4 on both linux and windows.
The attached layer "3763" causes qgis to crash if interpolatin...
Giovanni Manghi
03:32 PM Bug report #5230: qgis server: set the mssql driver ON/OFF with cmake configuration
fix was applied in qgis/master commit:04e826881a0d7d35605b8c3399e27fe3993e8a30 Tamas Szekeres
07:32 AM Bug report #5230: qgis server: set the mssql driver ON/OFF with cmake configuration
Issue now is fixed in szekerest/master (https://github.com/szekerest) should be merged back to qgis Tamas Szekeres
03:21 PM Bug report #5238: ecw support in qgis-dev is broken since gdal 1.9
Hallo Giovanni
ecw is listed (see attached file). I will wait for the update.
Thank you
Gerhard
Gerhard Spieles
03:13 PM Bug report #5238: ecw support in qgis-dev is broken since gdal 1.9
gespiel - wrote:
> Hallo Giovanni,
>
> i reinstalled the gedal ecw package, but ecw is not recognized.
>
> Picture ...
Giovanni Manghi
03:10 PM Bug report #5238: ecw support in qgis-dev is broken since gdal 1.9
Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install...
Gerhard Spieles
03:10 PM Bug report #5238: ecw support in qgis-dev is broken since gdal 1.9
Hallo Giovanni,
i reinstalled the gedal ecw package, but ecw is not recognized.
Picture from osgeo4w online install...
Gerhard Spieles
02:38 PM Bug report #5238 (Closed): ecw support in qgis-dev is broken since gdal 1.9
please install the package gdal-ecw. Reopen if necessary. Giovanni Manghi
02:38 PM Bug report #5238 (Closed): ecw support in qgis-dev is broken since gdal 1.9
please install the package gdal-ecw. Reopen if necessary. Giovanni Manghi
02:36 PM Bug report #5238 (Closed): ecw support in qgis-dev is broken since gdal 1.9
Hello,
trying to laod an ecw raster, qgis-dev reports, that ecw is not a supported raster format.
The problem occurs...
Gerhard Spieles
03:03 PM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s... Giovanni Manghi
03:03 PM Bug report #3743: [OsX] Georeferencer: can't set map coords from map canvas, and other odd behavior
At a recent training course the issue still confirmed on a Snow Leopard Mac and QGIS 1.7.4: the georeferencer can't s... Giovanni Manghi
05:46 AM Bug report #5235: Link to SQL server spatial view fails
Tested on version 1.9.90-Alpha James Perrins
05:17 AM Bug report #5235 (Closed): Link to SQL server spatial view fails
Trying to link to a SQL view that contains geometry.
I get offered the table in the list of possible layers.
Invalid...
James Perrins
05:11 AM Feature request #5234 (Closed): Add ring + automatic "fill hole" tool
It would be very useful to have an option to have the carved holes automatically filled with a new polygon. Giovanni Manghi
05:06 AM Bug report #5233 (Feedback): Segmentation fault (on linux) with INTERLIS data
Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver...
Giovanni Manghi
05:06 AM Bug report #5233 (Feedback): Segmentation fault (on linux) with INTERLIS data
Salvatore Larosa wrote:
> Giovanni Manghi wrote:
> > > I'm using Debian/wheezy 64 bit and it works fine in master ver...
Giovanni Manghi
04:14 AM Bug report #5233: Segmentation fault (on linux) with INTERLIS data
Giovanni Manghi wrote:
> > I'm using Debian/wheezy 64 bit and it works fine in master version!
>
> what version of g...
Salvatore Larosa
04:07 AM Bug report #5233: Segmentation fault (on linux) with INTERLIS data

> I'm using Debian/wheezy 64 bit and it works fine in master version!
what version of gdal/ogr?
Giovanni Manghi
04:04 AM Bug report #5233: Segmentation fault (on linux) with INTERLIS data
Giovanni Manghi wrote:
> PS
>
> I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms...
Salvatore Larosa
03:44 AM Bug report #5233: Segmentation fault (on linux) with INTERLIS data
PS
I'm using Ubuntu 11.10 64 bit. There have been reports that on other linux platforms seems to work fine.
Giovanni Manghi
03:37 AM Bug report #5233 (Closed): Segmentation fault (on linux) with INTERLIS data
Opening this
http://www.interlis.ch/interlis2/docs23/test23_20080410.zip
causes seg fault on Linux (qgis 1.7.4 and ...
Giovanni Manghi
04:41 AM Feature request #5211 (Feedback): Calculator - add 10^
Giovanni Manghi
03:56 AM Bug report #4673: Rasterizer: let the user choose resolution, not number of rows & columns
The same applies for the "grid" tool. Giovanni Manghi
03:56 AM Bug report #4673: Rasterizer: let the user choose resolution, not number of rows & columns
The same applies for the "grid" tool. Giovanni Manghi

2012-03-25

01:16 AM Bug report #5231 (Feedback): QGis crashes on Gradual styling
Giovanni Manghi
01:14 AM Bug report #5231: QGis crashes on Gradual styling
Hi, thanks for the sample.
It works fine here as both shape and postgis layer, using qgis-development version.
Ca...
Giovanni Manghi
12:45 AM Bug report #5231: QGis crashes on Gradual styling
It seems my ZIPPED datafile is too large to attach. I will send it to you with a service. Victor Mensing
12:42 AM Bug report #5231: QGis crashes on Gradual styling
I use QGis 1.7.4 on Windows XP. The attached file is an export from the theme I used. I *can't* reproduce the crash w... Victor Mensing
12:21 AM Bug report #5231: QGis crashes on Gradual styling
on what platform? can you please post a sample dataset that causes the issue? thanks. Giovanni Manghi
12:17 AM Bug report #5231 (Closed): QGis crashes on Gradual styling
There are made significant improvements on saving styling on legends in QGis 1.7.4 vs 1.7.3, but if when chosen for s... Victor Mensing
12:33 AM Bug report #5232 (Open): "add direction symbol" does not work with curved labels
Subject says it all. If I switch to "parallel", it shows fine. Tested on 1.7.4 and master. Giovanni Manghi
12:29 AM Bug report #5226 (Closed): Unable to select multiple features in new symbology
Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32...
Giovanni Manghi
12:29 AM Bug report #5226 (Closed): Unable to select multiple features in new symbology
Nathan Woodrow wrote:
> Can you try a nightly build as this has already been added.
This thicket is duplicate of #32...
Giovanni Manghi
12:05 AM Bug report #4583: Raster reprojection error (plus QGIS freeze)
Hi Jurgen, we owe you a bounty? Bill Williamson
09:17 AM Bug report #5230 (Closed): qgis server: set the mssql driver ON/OFF with cmake configuration
Hi,
compiling qgis-server , with last revision of trunk, I have
no error in configuring phase, but this error in comp...
aperi2007 -
06:31 AM Bug report #5109 (Closed): ERROR: Geometry type Poly not match MultiPoly
Salvatore Larosa wrote:
> One more thing, Might it solve the problem very like with the SPIT plugin?
> Worth to file ...
Jürgen Fischer
06:31 AM Bug report #5109 (Closed): ERROR: Geometry type Poly not match MultiPoly
Salvatore Larosa wrote:
> One more thing, Might it solve the problem very like with the SPIT plugin?
> Worth to file ...
Jürgen Fischer
06:04 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Jürgen Fischer wrote:
> commit:49456116 should fix this.
Yes, solved!
Thanks!
I can't change the status ticket to cl...
Salvatore Larosa
03:50 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
commit:49456116 should fix this. Jürgen Fischer
03:20 AM Bug report #5227: Can't read linstring table from new MSSQL provider
Yes, if you specify a primary key and identity - a layer is added. Thank. Sergey M
03:16 AM Bug report #5229 (Closed): SQL Server type of geography: Latitude and Longitude are swapped.
When connecting to SQL Server (new native driver) to the table with the type of *geography* - longitude and latitude ... Sergey M

2012-03-24

11:48 PM Bug report #5227: Can't read linstring table from new MSSQL provider
Ok this is related to the int column *not* being a primary key and also *not* being a identity spec.
Create the tabl...
Nathan Woodrow
11:48 PM Bug report #5227: Can't read linstring table from new MSSQL provider
Ok this is related to the int column *not* being a primary key and also *not* being a identity spec.
Create the tabl...
Nathan Woodrow
08:08 PM Bug report #5227: Can't read linstring table from new MSSQL provider
Seems to be related to a primary key issue. Looking into it now. Nathan Woodrow
08:02 PM Bug report #5227: Can't read linstring table from new MSSQL provider
I can connect to the server and list the tables. But as per Sergey M, I get an invalid layer error message when I try... Jeremy Palmer
12:46 PM Bug report #5227: Can't read linstring table from new MSSQL provider
The same problem
SQL:...
Sergey M
01:41 AM Bug report #5227: Can't read linstring table from new MSSQL provider
Do you get any errors?
Can you open line and polygon tables correctly?
Are you able to supply and sample set so I...
Nathan Woodrow
03:17 PM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
I also tried the version 1.7.4 is working correctly on Windows!
The problem seems to be present only in the master ve...
Salvatore Larosa
09:45 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Something terrible has happened! :-)
I tried to edit and save with QGIS 1.7.3 (on the PC of a friend, but after that...
Salvatore Larosa
08:55 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Salvatore Larosa wrote:
> I noticed that it happens only if the geometry is identified as a 'MULTI[LINESTRING,POINT,P...
Jürgen Fischer
08:48 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
I noticed that it happens only if the geometry is identified as a 'MULTI[LINESTRING,POINT,POLYGON]'
Salvatore Larosa
08:32 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Jürgen Fischer wrote:
> The constraint is the problem (or QGIS' ignorance about it, if you like). Changing it to
>
...
Salvatore Larosa
08:17 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Salvatore Larosa wrote:
> I did try to add some constraints:
> CONSTRAINT enforce_dims CHECK (st_ndims(geom) = 2),
> ...
Jürgen Fischer
10:15 AM Feature request #4591 (Closed): Add option to allow avoid copying WKT geometry when copying/pasti...
Fixed in changeset commit:"0ee37699a7d87e0d260f14e7b89db70662245ecf". Alexander Bruy
03:32 AM Bug report #5220: Query builder uses strings as numbers?
Jürgen Fischer wrote:
> Giovanni Manghi wrote:
> > How @>@ works for strings?
>
> Um, isn't that obvious?
frankly...
Giovanni Manghi
03:29 AM Bug report #5220 (Closed): Query builder uses strings as numbers?
Giovanni Manghi
03:26 AM Bug report #5220: Query builder uses strings as numbers?
Giovanni Manghi wrote:
> How @>@ works for strings?
Um, isn't that obvious? E.g. in an ordered list of (unique) nam...
Jürgen Fischer
03:07 AM Feature request #5211: Calculator - add 10^
What's wrong with the available @^@ operator? Jürgen Fischer
01:55 AM Feature request #5228 (Closed): MSSQL spatial provider enhancements
Tamas Szekeres

2012-03-23

12:26 AM Bug report #5227 (Closed): Can't read linstring table from new MSSQL provider
I can't seem to read any line-string spatial tables from MSSQL 2008 R2 Jeremy Palmer
05:09 PM Bug report #5226: Unable to select multiple features in new symbology
Can you try a nightly build as this has already been added. Nathan Woodrow
01:48 PM Bug report #5226 (Closed): Unable to select multiple features in new symbology
Using old symbology, holding down the Apple key I can select multiple features and apply the same line or fill styles... Kenton Ngo
07:06 AM Bug report #5225 (Closed): Error for labeling with rule based renderer
Hi,
I have a point shape layer with street names. The field 'name' often only contains the word "Weg" and I don't wa...
Otto Dassau
05:10 AM Bug report #5224 (Closed): 'Merge selected features' tool creates invalid MULTIPOLYGON instead of...
In some cases, 'Merge selected feature' tool creates invalid MULTIPOLYGON instead of possible single POLYGON geometry... Ivan Mincik
02:44 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Hi, my table is:... Salvatore Larosa
02:17 AM Bug report #5220: Query builder uses strings as numbers?
Hi Jurgen, thanks for the feedback.
Jürgen Fischer wrote:
> Do you mean "shouldn't make any sense"?
yes sorry
> ...
Giovanni Manghi

2012-03-22

12:42 AM Bug report #5109: ERROR: Geometry type Poly not match MultiPoly
Hi,
what are the constraints in the table in Postgis. The error message sounds like a Postgis problem - not like a Q...
Andreas Neumann
02:53 PM Bug report #5220: Query builder uses strings as numbers?
Do you mean "shouldn't make any sense"? But even then I don't understand what the problem with @"NUM_F" > '175'@ is ... Jürgen Fischer
02:31 AM Bug report #5220 (Closed): Query builder uses strings as numbers?
I just noticed in qgis 1.7.4 and master that if I build a query like "DISTRITO" > 'FARO' or "NUM_F" > '175' (where "N... Giovanni Manghi
02:47 PM Bug report #5203 (Closed): Attribute editor can not insert numbers into fields of type numeric(pr...
Fixed in changeset commit:"587b33821dde8343d188d5683d5b9e153528c963". Jürgen Fischer
12:52 PM Bug report #5223 (Closed): ftools Intersection fails to gathering all shapes
In both 1.7.1 (which I used until yesterday) and 1.7.4, when I use vector:geoprocessing tools:intersect, known shapes... John Lortscher
11:23 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
adding a note that Jurgen added a fix for this in commit:c065736b71f856c22814d2f29f248b88e442ae6e
Full fix could be ...
Etienne Tourigny
10:03 AM Bug report #5222 (Closed): finding custom svg from project file assumes only on level of director...
I've tested it in 1.7.4 and master.
In order to use a custom svg file I've dropped it into ~homedir/.qgis/svg/<custo...
Gabriele Monfardini
06:25 AM Feature request #5221 (Closed): Write QPJ file when defining CRS for layer
If a layer is loaded that doesn't have an assigned CRS (eg a Shapefile without a PRJ) then depending on program optio... Andy Harfoot
02:57 AM Bug report #5210: QGIS freezes when editing via WFS-T
No, I don´t. I use a fresh installation of GeoServer 2.1.3. I tried with a few of the standard layers and got the sam... Magnus Nilsson
02:19 AM Bug report #5210: QGIS freezes when editing via WFS-T
johnrobot - wrote:
> I use http://localhost:8080/geoserver/wfs from GeoServer 2.1.3, so it isn´t a public URL.
do yo...
Giovanni Manghi
02:18 AM Feature request #5218 (Closed): Coordinate reference system for multiple shp file open
duplicate of #5219 Giovanni Manghi
02:18 AM Feature request #5218 (Closed): Coordinate reference system for multiple shp file open
duplicate of #5219 Giovanni Manghi
02:17 AM Feature request #5219 (Feedback): Coordinate reference system for multiple shp file open
I believe you may want to look at the "CRS" tab in the general options, in particular the "coordinate reference syste... Giovanni Manghi

2012-03-21

06:39 PM Feature request #5219 (Closed): Coordinate reference system for multiple shp file open
Hi team,
first of all thank you so much to provide such a great tool in open source world!
QGIS 1.7.4 on window wan...
Bernard park
06:35 PM Feature request #5218 (Closed): Coordinate reference system for multiple shp file open
Hi team,
first of all thank you so much to provide such a great tool in open source world!
QGIS 1.7.4 on window wan...
Bernard park
02:38 PM Feature request #5217 (Open): Rendering Symbol level: merge the boundary when the level is the same
Hi, I guess in the rule rendering, using the symbol level, when two feature are touching on a portion each-other and ... aperi2007 -
01:07 PM Feature request #5215: Save text annotations as shapefile
Yes this is really interesting.
Some the shapefile has max 255 chars and don't allow carriage returns.
I guess a si...
aperi2007 -
08:26 AM Feature request #5215 (Open): Save text annotations as shapefile
It would be very useful to allow save text annotation as shapefile (point layer) where the text of the annotations is... Giovanni Manghi
12:51 PM Bug report #5210: QGIS freezes when editing via WFS-T
I use http://localhost:8080/geoserver/wfs from GeoServer 2.1.3, so it isn´t a public URL. Magnus Nilsson
12:47 PM Bug report #5210: QGIS freezes when editing via WFS-T
can you post a public URL that causes the issue? Giovanni Manghi
12:42 PM Bug report #5210: QGIS freezes when editing via WFS-T
I have tried with 1.9.90-alpha (qgis-dev) and I can confirm that the same problem occurs here as well. In fact, when ... Magnus Nilsson
09:25 AM Feature request #5216 (Open): Modify default options in QGIS
It would be nice if we could change default QGIS options.
For example, the default font used by QGIS composer on my ...
Simon Georget
08:11 AM Feature request #5214 (Closed): field-calculator: a new function to fill a string of repeated chars
Hi,
in the field-calculator to fill a field of the attribute-table,
should be really useful a function like the
"rep...
aperi2007 -

2012-03-20

01:35 PM Bug report #5176: Wrong projections for custom CRS
I can confirm this issue. It's well-described above. It has been around since at least June 2011. Layers shouldn't be... Gavin Fleming
01:13 PM Bug report #5212 (Closed): Proxy settings ignored for layers
Proxy settings are ignored when trying to add a vector layer that is on the web, ie:
http://geonb.snb.ca/ArcGIS/re...
Andrew DeMerchant
12:15 PM Feature request #5211 (Closed): Calculator - add 10^
In the qgis calculator I notice miss the 10^ as invert of
log10.
aperi2007 -
11:48 AM Bug report #5210: QGIS freezes when editing via WFS-T
Can you please give a try to qgis-dev using osgeo4w? thanks. Giovanni Manghi
11:46 AM Bug report #5210 (Closed): QGIS freezes when editing via WFS-T
I add a WFS and go into edit mode. QGIS freezes when I edit a node in a line from a GeoServer localhost WFS and try t... Magnus Nilsson
09:00 AM Bug report #4567 (Feedback): Ftools - Union returns Wrong Table of Attributes
Hi Alexandre,
the resulting table of attributes looks like the attached image (I'm using master on both linux and wi...
Giovanni Manghi
09:00 AM Bug report #4567 (Feedback): Ftools - Union returns Wrong Table of Attributes
Hi Alexandre,
the resulting table of attributes looks like the attached image (I'm using master on both linux and wi...
Giovanni Manghi
07:17 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
Giovanni Manghi wrote:
> Can you please detail what should be the expected result with the attached sample data? tha...
Giovanni Manghi
07:16 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
Can you please detail what should be the expected result with the attached sample data? thanks.
Alexandre Neto wrote...
Giovanni Manghi
07:14 AM Bug report #4567: Ftools - Union returns Wrong Table of Attributes
Is there any news about this problem?
I'm trying Union both in 1.7.4 and 1.9.90-Alpha QGIS code revision
f3b78ef, in...
Alexandre Neto
08:46 AM Bug report #5209 (Closed): Print layout: Image item properties panel too wide
In the Print Layout window, the right panel for images is much wider than others, and not resizable, so it does not f... Paolo Cavallini
08:27 AM Bug report #4053: QGIS Globe crashes on launch
Globe plugin is regularly crashing also my qgis (master, self packaged on debian, both testing and unstable):
warnin...
Paolo Cavallini
07:07 AM Feature request #5094 (Closed): QGIS Server Web Feature Service capabilities
Added to master branch in commit c27c89045c172ae1afc68a5571552e145d426f15. Thank you René-Luc for this nice work!
To...
Marco Hugentobler
02:28 AM Feature request #5094: QGIS Server Web Feature Service capabilities

> We, at 3Liz, would like to have WFS directly in QGIS Server like MapServer has, because we don't want to
> instal...
Vincent Picavet
03:21 AM Bug report #4050: GPSD Server WATCH request

> Quantum GIS - 1.7.4-Wroclaw 'Wroclaw' (exported)
>
> It doesn't have the fix.
if the fix was not backported to ...
Giovanni Manghi
03:20 AM Bug report #5207 (Rejected): Error handling null values (numeric, decimal)
The issue has been fixed, but if the fix was not backported then is available only in qgis-master. Giovanni Manghi
03:20 AM Bug report #5207 (Rejected): Error handling null values (numeric, decimal)
The issue has been fixed, but if the fix was not backported then is available only in qgis-master. Giovanni Manghi

2012-03-19

03:14 PM Bug report #4050: GPSD Server WATCH request
I've been using the RPM version for Fedora 15:
Quantum GIS - 1.7.4-Wroclaw 'Wroclaw' (exported)
It doesn't have the...
Joseph Wolf
12:14 PM Bug report #4050: GPSD Server WATCH request
Joseph Wolf wrote:
> Is this fix applied yet?
if it wasn't backported you will need to install qgis-master
Giovanni Manghi
12:13 PM Bug report #4050: GPSD Server WATCH request
Is this fix applied yet?
Joseph Wolf
12:13 PM Bug report #4050: GPSD Server WATCH request
Is this fix applied yet?
Joseph Wolf
02:49 PM Bug report #5207 (Rejected): Error handling null values (numeric, decimal)
If postgres numeric, decimal fields are empty users can't enter number. Bug #4089 was closed but still exists in vers... Jože Detečnik
01:12 PM Bug report #4106: Error in join
Dan - I encountered a similar issue. Windows doesn't like non-Admins to save things to the C:\\Program Files\\ direct... Jeff Meyer
12:35 PM Bug report #4521: Map Tips does not work with on the fly CRS transformation
MapTips also displays the message "Maptips require an active layer" after user has selected a layer: the warning mess... Thaddeus -
11:11 AM Bug report #5176: Wrong projections for custom CRS
I can confirm this issue. Wish I'd seen this before I spend my morning tracking it down! Not only is this a display... Brian Freed
10:54 AM Bug report #5205 (Closed): PCT to RGB not working.
Works randomly with errors like "IndexError: index out of range for array" or the resulting tiff has the wrong refere... Thaddeus -
09:33 AM Bug report #5204 (Closed): Create grid: wrong extent with OTF
* Activate OTF reprojection
* Create a grid based on the extent of a layer that is in a different SRS from that of th...
Paolo Cavallini
08:05 AM Bug report #5195 (Closed): Add saved file to the map requires the file extension
Duplicate #5014 Alexander Bruy
08:05 AM Bug report #5195 (Closed): Add saved file to the map requires the file extension
Duplicate #5014 Alexander Bruy
07:13 AM Bug report #5203 (Closed): Attribute editor can not insert numbers into fields of type numeric(pr...
If I have an attribute of type numeric (precision, scale) I can't insert a new field - simply put, no letters appear ... Gissur Þórhallsson
05:47 AM Feature request #5094: QGIS Server Web Feature Service capabilities
Hey it's opensource,
We, at 3Liz, would like to have WFS directly in QGIS Server like MapServer has, because we don'...
René-Luc ReLuc
05:17 AM Feature request #5094: QGIS Server Web Feature Service capabilities
Hi,
> TinyOWS only works with PostGIS and does not use QDOM. Having WFS capabilities in Qgis brings more supported v...
Vincent Picavet
04:52 AM Feature request #5094: QGIS Server Web Feature Service capabilities
The new patch attached (wfs-server-V4.patch) adds the capability to select the published layer in the WFS Service via... Michael Douchin
04:10 AM Bug report #5202 (Closed): "random points" tool create points all in the same place if a raster (...
subject says it all Giovanni Manghi

2012-03-18

12:27 AM Bug report #5121 (Closed): (regression) qgis crashes if select a serial port and push the connect...
Thomas Arnold wrote:
> is that file ok?
Yes. Thanks. Applied in commit:6972cfa
Jürgen Fischer
12:27 AM Bug report #5121 (Closed): (regression) qgis crashes if select a serial port and push the connect...
Thomas Arnold wrote:
> is that file ok?
Yes. Thanks. Applied in commit:6972cfa
Jürgen Fischer
12:17 AM Bug report #5121: (regression) qgis crashes if select a serial port and push the connect button i...
Hi,
is that file ok?
Thomas Arnold
05:24 PM Bug report #5200 (Closed): RT_Sql_layer: error python on startup
QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr...
Giuseppe Sucameli
05:24 PM Bug report #5200 (Closed): RT_Sql_layer: error python on startup
QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr...
Giuseppe Sucameli
05:24 PM Bug report #5200 (Closed): RT_Sql_layer: error python on startup
QGis trac is the wrong place to open ticket for non-core plugins.
I moved your ticket to the RT_Sql_layer plugin tr...
Giuseppe Sucameli
05:08 PM Bug report #5200 (Closed): RT_Sql_layer: error python on startup
Hi,
When I choose, in the RT_Sql_Layer a db-connection on postgis,
I have this python error:...
aperi2007 -
03:40 PM Feature request #5199 (Rejected): Relative paths for qgis server
Jürgen Fischer
03:25 PM Feature request #5199: Relative paths for qgis server
I was reading old tutorial perhaps.
Relative paths are working fine, thank you
bradypus -
09:56 AM Feature request #5199: Relative paths for qgis server
Relative paths are already supported. What version/pla
tform are you using?
Giovanni Manghi
09:52 AM Feature request #5199 (Rejected): Relative paths for qgis server
Hello all,
this is a feature request for qgis server. It wuold be very useful to have relative paths in qgis server i...
bradypus -
06:07 AM Bug report #5198 (Closed): qgis-server: under Windows shapes and tiffs are not rendered (with rel...
Hi,
I just tested qgis-server (master) under Windows/Osgeo4w.
I noticed that works all ok when using absolute paths...
Giovanni Manghi
03:37 AM Bug report #5197: Feature connectivity breaks in "project on the fly" editing
I'm not sure what this mean and how I would try to replicate the issue. Can you try explain better (a step by step pr... Giovanni Manghi
03:15 AM Bug report #5197 (Closed): Feature connectivity breaks in "project on the fly" editing
There are micro-breaks into geometry connectivity when non-projected data edited in "project on the fly" and "snappin... Oleg Seliverstov
03:06 AM Bug report #5174: 'Label field' based on joined table lost when reopening project (old labelling)
I experienced a similar behaviour.
I have a DXF added as layer, I joined a table, I used a joined field as label size...
Alessandro Ciali
01:17 AM Bug report #4972 (Closed): Zonal statistics: wrong IN and OUT files
Fixed in master branch (commit 9f57650eafec1bfa2d66c76e174d0a6b90a0726a ). Marco Hugentobler

2012-03-17

02:48 PM Bug report #5196 (Closed): QGIS crashes on style > categorized
I'm having this problem with QGIS 1.7.4 on MacOS 1.6.8. The bug was not present on 1.7.3 build.
Having a vector layer...
bradypus -
01:55 PM Bug report #5174: 'Label field' based on joined table lost when reopening project (old labelling)
Yes, I can confirm this. It is only using the old labeling in layers properties.
A similar problem occurs in this ca...
Gerhard Spieles
12:39 PM Bug report #5174: 'Label field' based on joined table lost when reopening project (old labelling)
Seems to me this is only with old labelling, not with the new one. Do you confirm? Marco Hugentobler

2012-03-16

01:10 PM Bug report #4521: Map Tips does not work with on the fly CRS transformation
The Hotlink plug-in suffers the same fate: ¿ would this be related or a different ticket ? Thaddeus -
01:07 PM Feature request #1591: Coordinate capture plugin: lat/long reversed?
Adding the x,y info. seems a good idea: the pointer tips, when hovering on the edit boxes, would be a handy place. No... Thaddeus -
07:52 AM Feature request #1591: Coordinate capture plugin: lat/long reversed?
I see there's been no movement on this :-(
It's a simple matter of usability it seems.
The user does not really care ...
belg4mit -
11:44 AM Bug report #5195 (Closed): Add saved file to the map requires the file extension
If I Save as... a shp with another name (without the shp extension), and I check the option Add saved file to the map... Paolo Cavallini
09:06 AM Bug report #5193 (Closed): rasterize misses the -of parameter (output format)
subject says it all Giovanni Manghi
08:56 AM Bug report #5191 (Closed): Missing Filter exporting to SLD from CategorizedRenderV2
Fixed in changeset commit:"c5769bf3799c785ab90d4f37fa1a0c7fe88cfc3f". Giuseppe Sucameli
07:47 AM Bug report #5191 (Closed): Missing Filter exporting to SLD from CategorizedRenderV2
Exporting a Categorized style (new symbology) to SLD results in a sld document with a missing Filter tag. Giuseppe Sucameli
08:12 AM Bug report #5190: Scroll wheel only moves lists down
I've had this issue since 1.4 on XP and still with 1.7.4 on Win 7. Will see if I can find a way to record a video, th... belg4mit -
07:55 AM Bug report #5190: Scroll wheel only moves lists down
Can not confirm, on Windows or Linux. Have never had this issue.
Can you upload a video?
Nathan Woodrow
07:37 AM Bug report #5190 (Closed): Scroll wheel only moves lists down
In GUI lists, like the list of layer styles, a scroll wheel only scrolls the list down, regardless of the direction t... belg4mit -
07:58 AM Bug report #5189: Ability to select & remove multiple symbologies in Syle panel of Properties
Nathan Woodrow wrote:
> Giovanni Manghi wrote:
> > sorry, I misunderstood the problem (well, I still do not understan...
Giovanni Manghi
07:56 AM Bug report #5189: Ability to select & remove multiple symbologies in Syle panel of Properties
Giovanni Manghi wrote:
> sorry, I misunderstood the problem (well, I still do not understand, by I obviously believe ...
Nathan Woodrow
07:54 AM Bug report #5189 (Reopened): Ability to select & remove multiple symbologies in Syle panel of Pro...
Nathan Woodrow wrote:
> Giovanni don't be so hasty, this is related to deleting items not multiple styling of items. ...
Giovanni Manghi
07:52 AM Bug report #5189: Ability to select & remove multiple symbologies in Syle panel of Properties
Giovanni don't be so hasty, this is related to deleting items not multiple styling of items.
Deleting more one item...
Nathan Woodrow
07:37 AM Bug report #5189 (Rejected): Ability to select & remove multiple symbologies in Syle panel of Pro...
multiple style classes selection and context menu (to change transparency,colour and unit) is available in qgis-master. Giovanni Manghi
07:37 AM Bug report #5189 (Rejected): Ability to select & remove multiple symbologies in Syle panel of Pro...
multiple style classes selection and context menu (to change transparency,colour and unit) is available in qgis-master. Giovanni Manghi
07:31 AM Bug report #5189 (Closed): Ability to select & remove multiple symbologies in Syle panel of Prope...
Barring the existence of a QUERY panel that would allow one to write SQL to select the correct records, one's best op... belg4mit -
07:39 AM Bug report #5188 (Closed): SPIT to carry over default privileges
Patrick Rickles wrote:
> Hi Giovanni,
>
> Could you notify the DB Manager developer about this issue (or let me know...
Giovanni Manghi
07:39 AM Bug report #5188 (Closed): SPIT to carry over default privileges
Patrick Rickles wrote:
> Hi Giovanni,
>
> Could you notify the DB Manager developer about this issue (or let me know...
Giovanni Manghi
06:15 AM Bug report #5188: SPIT to carry over default privileges
Hi Giovanni,
I've just downloaded PostGIS Manager (nice plugin!), but can verify the same issue with default access ...
Patrick Rickles
05:23 AM Bug report #5188: SPIT to carry over default privileges
Patrick Rickles wrote:
> Will the DB Manager carry over default access privileges? When will the DB Manager be availa...
Giovanni Manghi
05:20 AM Bug report #5188: SPIT to carry over default privileges
Will the DB Manager carry over default access privileges? When will the DB Manager be available with a stable release... Patrick Rickles
05:15 AM Bug report #5188: SPIT to carry over default privileges
SPIT is not mantained and it will be discontinued as soon as DB Manager (that is also a replacement of PostGIS Manage... Giovanni Manghi
05:12 AM Bug report #5188 (Closed): SPIT to carry over default privileges
I am trying to set up a postgres/postgis database for multiple users (roles) to import shapefiles into and view/edit.... Patrick Rickles
03:30 AM Bug report #5121: (regression) qgis crashes if select a serial port and push the connect button i...
Hi Thomas,
can you attach a patch made with "diff"?
Thomas Arnold wrote:
> Hi,
> can anybody check the following so...
Giovanni Manghi
03:28 AM Bug report #5121: (regression) qgis crashes if select a serial port and push the connect button i...
Hi,
can anybody check the following solution for this problem?
QgsGPSInformationWidget::connectGps(){
...
//replace ...
Thomas Arnold
03:04 AM Bug report #5187 (Closed): Intersect tool should inform the user if both layers have a similar at...
Currently the intersect tool does not check whether the the two layers have a similar fieldname title. In one case, ... maning sambale
02:54 AM Feature request #5185 (Closed): 'Select All' command in core
A select all command is available from the SelectPlus plugin developed by Barry Rowlingson. Most of the other feature... Andy Harfoot

2012-03-15

11:18 PM Bug report #4821: Can't print in A0 size, used to work in QGIS 1.6
I tested the qgis 1.7.4 BAD allocation problem on winxp with a collegue of mine. She frequently has this bad allocati... bis nulama
11:18 PM Bug report #4821: Can't print in A0 size, used to work in QGIS 1.6
I tested the egis 1.7.4 BAD allocation problem on winxp with a collegue of mine. She frequently has this bad allocati... bis nulama
01:47 PM Bug report #5184 (Rejected): GoogleLayersPlugin 0.7.2 crash with 1.74 and QGIS-master
GoogleLayers plugin crash when QGIS strarts.
Content of the Python window report is attached
Gerhard Spieles
01:38 PM Bug report #4521: Map Tips does not work with on the fly CRS transformation
This is still not working on my QGIS version 1.7.4 Wroclaw: only works if on-the-fly CRS is off or set the same as da... Thaddeus -
11:11 AM Bug report #5183 (Closed): Scale bar has wrong units for GeoJSON layer
If I import a GeoJSON file as a layer in a new project, the scale bar shows units as "CM" and the bar length/distance... Tony Bigbee
09:28 AM Bug report #5151 (Closed): OSGEO4W_ROOT not set correctly in Windows 2000
Jürgen Fischer
09:17 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
Success! Your suggestion works. Thank you for helping me to continue to run the very very ancient Windows 2000. Steve Hartley
05:31 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
Steve Hartley wrote:
> Sorry - my programming ignorance. I thought %cd% meant the current dir.
> When I open qgis.ba...
Jürgen Fischer
05:13 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
Sorry - my programming ignorance. I thought %cd% meant the current dir.
When I open qgis.bat I get the echo:
OSGEO...
Steve Hartley
04:32 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
Steve Hartley wrote:
> qgis.bat (in C:\\OSGeo4W\\bin) sets the root dir to C:\\OSGeo4W, but then calls o4w_env.bat (a...
Jürgen Fischer
03:37 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
Forgot to say, I now get the same problem installing trunk, but haven't had this problem installing previous (1.7.3 &... Steve Hartley
03:34 AM Bug report #5151: OSGEO4W_ROOT not set correctly in Windows 2000
qgis.bat (in C:\\OSGeo4W\\bin) sets the root dir to C:\\OSGeo4W, but then calls o4w_env.bat (also in C:\\OSGeo4W\\bin... Steve Hartley
09:11 AM Bug report #5182 (Closed): fTools Merge Shapefiles command object type checking
This error already fixed. You can use master or wait for 1.7.5/1.8.0 Alexander Bruy
09:11 AM Bug report #5182 (Closed): fTools Merge Shapefiles command object type checking
This error already fixed. You can use master or wait for 1.7.5/1.8.0 Alexander Bruy
08:50 AM Bug report #5182: fTools Merge Shapefiles command object type checking
My mistake - the original error was obtained using QGIS 1.7.3 (standalone install) on Win 7 64 bit. I can't reproduce... Andy Harfoot
08:11 AM Bug report #5182 (Feedback): fTools Merge Shapefiles command object type checking
Not reproducible here with master and latest release-1_7. Please try and report Alexander Bruy
04:36 AM Bug report #5182 (Closed): fTools Merge Shapefiles command object type checking
Using the merge shapefiles command from fTools, if the 'Select by layers in the folder' option is checked, then despi... Andy Harfoot
06:56 AM Bug report #5163 (Closed): points in polygon: does not count points on boundaries
Fixed in changeset commit:"9151fd583b5062a4e085bba70364cd3c0a0c4885". Alexander Bruy
04:50 AM Bug report #4911: Query Builder + MySQL syntax error
It's working fine now that a new dev build is released.
One have still to remove double quotes from field name, but i...
bradypus -
04:37 AM Bug report #5081: QGIS server raster problem
Updating QGIS to 1.7.4-4 (MacOS) solved my problem.
I'm correctly visualizing rasters now. No need to change FcgidIOT...
bradypus -

2012-03-14

02:43 PM Bug report #5181 (Closed): fTools python error with option k=1 on 'Distance Matrix'
When using the fTools plugin, 'Vector -> Analysis Tools -> Distance Matrix', if 'Summary Distance Matrix' is chosen w... David Quinn
12:34 PM Bug report #2465 (Feedback): Georeferencer: does not correctly handle files with existing georefe...
Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG...
Giovanni Manghi
12:09 PM Bug report #5163: points in polygon: does not count points on boundaries
This is because it isn't programmed to test for intersections :-p The tool checks for containment: It uses QgsGeometr... cfarmer -
11:32 AM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
Alister Hood wrote:
> I don't have QGIS here to test, but I'm wondering:
> - what happens if you divide two fields wi...
Martin Dobias
10:58 AM Bug report #4011 (Feedback): Map canvas flickers when content is dragged
jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys...
Giovanni Manghi
10:58 AM Bug report #4011 (Feedback): Map canvas flickers when content is dragged
jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys...
Giovanni Manghi
10:58 AM Bug report #4011 (Feedback): Map canvas flickers when content is dragged
jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys...
Giovanni Manghi
10:58 AM Bug report #4011 (Feedback): Map canvas flickers when content is dragged
jekhor - wrote:
> Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my sys...
Giovanni Manghi
10:56 AM Bug report #5158 (Feedback): QGIS 1.7.4 with fTools : polygon centroids errors
can you please attach a sample of the data that is causing the issue? thanks. Giovanni Manghi
10:54 AM Bug report #3652: labels buffer: wrong results if data defined setting is used for size
Martin Dobias wrote:
> What property is data-defined - font size or buffer size?
buffer size
> Please note that Qt ...
Giovanni Manghi
10:25 AM Bug report #5159 (Closed): QGIS 1.7.4 with fTools : polygon centroids errors
Giovanni Manghi
07:33 AM Bug report #5176: Wrong projections for custom CRS
Let's suppose an another user uses the third PC. He has never used unrecognised CRS and he has no customised CRS. If ... zirneklitis -
05:43 AM Bug report #5176 (Closed): Wrong projections for custom CRS
+*Background:*+
Any unrecognised CRS from maps are registered as a new Custom CRS with a new ID (starting from 10000...
zirneklitis -
07:12 AM Bug report #5133: Error in high resolution exports with transparent rasters
No because ECW raster don't work with both Win and Linux version up to 1.7.1!
My solution for the moment : I export p...
Alexis Viaud
06:40 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
Hi Jurgen
> Does that mean you checked if the CRS is found correctly in the database and the PROJ.4 string is what i...
Giovanni Manghi
06:00 AM Bug report #5146: Shapefile merge crashes in 1.7.4

> P.S.: damn redmine, can't change ticket status to "Feedback".
try now
Giovanni Manghi
05:30 AM Bug report #4909: qgis hang when postgres close the connection

> I use postgres 9.1.3 and postgis 2.0 beta2.
> Also I use qgis-dev (for windows ) 3a2c0e9.
>
> Andrea.
This may...
Giovanni Manghi
05:09 AM Feature request #5175 (Closed): Add render caching also for extent changes
Not sure how hard it would be implementing such feature, but it would result in a huge improvement in vector renderin... Giovanni Manghi
04:53 AM Feature request #4103: "Snap Tolerance" dialogue text needs to be updated
An enhancement in this message window is a button to open the Snapping Options dialog directly. maning sambale
04:47 AM Bug report #5162: points in polygon never ends
Confirmed, and causes a complete freeze here. Giovanni Manghi
04:47 AM Bug report #5162: points in polygon never ends
Confirmed, and causes a complete freeze here. Giovanni Manghi
04:47 AM Bug report #5162: points in polygon never ends
Confirmed, and causes a complete freeze here. Giovanni Manghi
04:47 AM Bug report #5162: points in polygon never ends
Confirmed, and causes a complete freeze here. Giovanni Manghi
04:47 AM Bug report #5162: points in polygon never ends
Confirmed, and causes a complete freeze here. Giovanni Manghi
03:32 AM Bug report #5174: 'Label field' based on joined table lost when reopening project (old labelling)
Tested on latest 'release-1_7' branch. Ivan Mincik
03:26 AM Bug report #5174 (Closed): 'Label field' based on joined table lost when reopening project (old l...
'Field containing label' setting is lost each time when reopening project in case if label field is set from joined t... Ivan Mincik
03:23 AM Feature request #5126 (Closed): "Run feature action" tool should run the action for all matching ...
Fixed in changeset commit:"db1c401dd90e0e7ef6c7dc4e76113427dcfa32f1". Giuseppe Sucameli

2012-03-13

05:11 PM Bug report #4210 (Closed): Layer actions: "capture output" option is forgotten when selecting an ...
This was fixed in master in January (see commit:764e85b2b)
Giuseppe Sucameli
05:11 PM Bug report #4210 (Closed): Layer actions: "capture output" option is forgotten when selecting an ...
This was fixed in master in January (see commit:764e85b2b)
Giuseppe Sucameli
05:11 PM Bug report #4210 (Closed): Layer actions: "capture output" option is forgotten when selecting an ...
This was fixed in master in January (see commit:764e85b2b)
Giuseppe Sucameli
05:11 PM Bug report #4210 (Closed): Layer actions: "capture output" option is forgotten when selecting an ...
This was fixed in master in January (see commit:764e85b2b)
Giuseppe Sucameli
05:11 PM Bug report #4210 (Closed): Layer actions: "capture output" option is forgotten when selecting an ...
This was fixed in master in January (see commit:764e85b2b)
Giuseppe Sucameli
03:31 PM Bug report #5173 (Closed): Shape file field precision includes the . when saving, but not when ed...
e.g. if an attribute field in a shapefile has precision = 2, when I edit it I can input values like 2.12, but when I ... Alister Hood
03:11 PM Bug report #5172 (Closed): When a memory layer is "saved as" a shapefile, any null values in the ...
What the subject says. I don't know if this is really a data provider plugin, or what.
I haven't tested if the same ...
Alister Hood
02:46 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
> If I do this the results are shown with many decimal places, regardless of the precision of the output field!^:
> $...
Alister Hood
02:42 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
Alister Hood wrote:
> I don't have QGIS here to test, but I'm wondering:
> - what happens if you divide two fields wi...
Alister Hood
05:18 AM Bug report #5171 (Feedback): Qgis 1.7.4 (and 1.9.9) crashes on GPS bluetooth connection
Giovanni Manghi
05:18 AM Bug report #5171: Qgis 1.7.4 (and 1.9.9) crashes on GPS bluetooth connection
related/duplicated of #5121 ? Giovanni Manghi
05:18 AM Bug report #5171: Qgis 1.7.4 (and 1.9.9) crashes on GPS bluetooth connection
related/duplicated of #5121 ? Giovanni Manghi
04:10 AM Bug report #5171 (Closed): Qgis 1.7.4 (and 1.9.9) crashes on GPS bluetooth connection
Hello
I just installed Qgis on my laptop running Win7 32bit Home Premium (amd c-60 apu)
After the creation of a bluet...
Pietro Rossin

2012-03-12

02:50 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
I don't have QGIS here to test, but I'm wondering:
- what happens if you divide two fields with precision 0 by each o...
Alister Hood
02:42 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
Say the help for this (not currently implemented in Nathan's expression builder) is "a/b : a divided by b", change it... Alister Hood
12:54 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
I am fine with the current behavior.
What do you suggest to make it more obvious to the user?
Martin Dobias
01:09 PM Bug report #5169: QGIS crashes on startup on 64 bit Ubuntu
I m on a Pangolin nightly/live trying to run qgis and on top of what you get, i get
@
qgis.bin: /build/buildd/sip4-4....
Marco Bernasocchi
01:06 PM Bug report #5169 (Closed): QGIS crashes on startup on 64 bit Ubuntu
I am running QGIS version 1.7.4-1 on 64 bit Ubuntu 11.10. When I try to start QGIS the splash screen appears and the... Simon Coffey
12:34 PM Bug report #5168: Grass plugin is disappeared
Hi,
reinstalling msys the grass plugin is become available,
thx,
Andrea.
aperi2007 -
10:21 AM Bug report #5168 (Rejected): Grass plugin is disappeared
Seems to be bug "OSGeo4W # 269":http://trac.osgeo.org/osgeo4w/ticket/269 for some reason a reinstall of msys is needed. Jürgen Fischer
10:21 AM Bug report #5168 (Rejected): Grass plugin is disappeared
Seems to be bug "OSGeo4W # 269":http://trac.osgeo.org/osgeo4w/ticket/269 for some reason a reinstall of msys is needed. Jürgen Fischer
09:52 AM Bug report #5168 (Rejected): Grass plugin is disappeared
Hi,
in the osgeo4w version of qgis-dev (r213138e) the plugin Gass is disappeared.
aperi2007 -
10:53 AM Bug report #4867: drag and drop fails
Paolo Cavallini wrote:
> The attachment seems to have only a .prj file.
http://thematicmapping.org/downloads/TM_WORL...
Giovanni Manghi
09:41 AM Bug report #4867: drag and drop fails
The attachment seems to have only a .prj file. Paolo Cavallini
10:47 AM Bug report #2465: Georeferencer: does not correctly handle files with existing georeferencing inf...
Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG...
Giovanni Manghi
10:47 AM Bug report #2465: Georeferencer: does not correctly handle files with existing georeferencing inf...
Luiz Motta wrote:
> Concluded the step 3 (Add the raster toolbar with histogram stretch functions) and added the EPSG...
Giovanni Manghi
02:36 AM Bug report #2465: Georeferencer: does not correctly handle files with existing georeferencing inf...
I ran into this problem several times. This bug is a big problem for my work (planetary geology) and forces me to use... Andrea Pacifici
09:26 AM Feature request #4782: GUI to import/export data
I mean importing DBF. Already possible through drag&drop? Paolo Cavallini
09:25 AM Feature request #4778: Import of multiple shapefiles in PostGIS
Already possible, by dragging & dropping multiple files, and also from file system. Only limitation: from file system... Paolo Cavallini
05:57 AM Bug report #5135: Spurious "Password" field in some GRASS modules
OK, got it: it is useful to add a password for database layers. It is OK as it stands. Thanks. Paolo Cavallini
05:18 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
Giovanni Manghi wrote:
> Jürgen Fischer wrote:
> > a bit vague. Did you check that the source and destination CRSes ...
Jürgen Fischer
04:12 AM Bug report #5081: QGIS server raster problem
Hi,
try to change the FcgidIOTimeout parameter (is a fastcgi modul parameter; see http://httpd.apache.org/mod_fcgid/m...
Thomas Arnold
03:40 AM Bug report #5163 (Closed): points in polygon: does not count points on boundaries
Results from points in polygon
are different than those obtained from R.
Results from qgis are always equal to or lo...
alobo -
03:34 AM Bug report #5162 (Closed): points in polygon never ends
Vector/Analysis tools/Points in Polygon never ends for moderately complex
polygon layers such as the one provided as ...
alobo -
02:17 AM Bug report #5161: Updating GEOS library to 3.3 on OSGeo4w
Paolo Cavallini wrote:
> Please open a ticket on the osgeo4w trac
there is already "OSGeo4W !#232":http://trac.osgeo...
Giovanni Manghi
02:14 AM Bug report #5161 (Rejected): Updating GEOS library to 3.3 on OSGeo4w
Please open a ticket on the osgeo4w trac Paolo Cavallini
02:14 AM Bug report #5161 (Rejected): Updating GEOS library to 3.3 on OSGeo4w
Please open a ticket on the osgeo4w trac Paolo Cavallini
02:11 AM Bug report #5161 (Closed): Updating GEOS library to 3.3 on OSGeo4w
Can anyone udate the GEOS lib to 3.3 version in OSGeo4w? Actually the available version is 3.2.
Thanks to all
Alessandro Ciali
02:13 AM Bug report #5145 (Closed): Segmentation fault when exiting qgis in master
Marco Hugentobler

2012-03-11

05:27 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
Do you think it should stay like that?
Things like this should at least be made really obvious to the user...
Alister Hood
01:28 PM Bug report #5153: Unexpected rounding in field calculator (documentation needed)
If both numbers in division are integers, then integer division is used. If any of those numbers is a floating point ... Martin Dobias
11:21 AM Bug report #3652: labels buffer: wrong results if data defined setting is used for size
What property is data-defined - font size or buffer size?
Please note that Qt has problems drawing bigger buffers - ...
Martin Dobias
11:05 AM Bug report #4634: [PATCH] New labelling engine: wrong label placement with both "around centroid"...
Confirmed. The PAL library calculates centroids by itself (not using GEOS) and apparently that code is suspectible to... Martin Dobias
09:46 AM Bug report #5160 (Closed): Error when checking for updates
When I click 'Help' -> 'Check QGIS Version' I get a windows that tells me the version I am using. Even if it is the m... David Quinn
08:49 AM Bug report #5159 (Closed): QGIS 1.7.4 with fTools : polygon centroids errors
Hi,
I have upgrade QGIS from 1.7.3 to 1.7.4.
I was working on a project and I had to use the "polygon centroids" ...
Merenguey Merenguey
08:49 AM Bug report #5158 (Closed): QGIS 1.7.4 with fTools : polygon centroids errors
Hi,
I have upgrade QGIS from 1.7.3 to 1.7.4.
I was working on a project and I had to use the "polygon centroids" ...
Merenguey Merenguey
01:34 AM Bug report #4011 (Reopened): Map canvas flickers when content is dragged
Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my system. Confirmations? jekhor -
01:34 AM Bug report #4011 (Reopened): Map canvas flickers when content is dragged
Reopen bug, because I didn't found any fixes in code. Probably bug is not reproduced only at my system. Confirmations? jekhor -
01:20 AM Bug report #4011 (Closed): Map canvas flickers when content is dragged
Seems be fixed in current master (91da6af5acf4ea09218a495a1ea85dc0ccae267e). jekhor -
01:20 AM Bug report #4011 (Closed): Map canvas flickers when content is dragged
Seems be fixed in current master (91da6af5acf4ea09218a495a1ea85dc0ccae267e). jekhor -

2012-03-10

10:03 PM Bug report #5157: Areas should be in expressed as m² or km², not m2 or km2"
(Sorry - It seems I hit the wrong key combination and submitted by mistake, before filling in the bug report)
When u...
Alister Hood
09:58 PM Bug report #5157 (Closed): Areas should be in expressed as m² or km², not m2 or km2"
Alister Hood
09:55 PM Bug report #5156 (Closed): Measure tool lines should be erased when switching to another measure ...
When you switch to another tool after using a measure tool, the grey lines that showed what you measured are erased f... Alister Hood
09:36 PM Bug report #5155 (Closed): memory layer attribute fields are combined when a memory layer or colu...
I guess this is a problem with the "Memory layer" data provider, but I could be wrong.
1) When I use the "Profile fr...
Alister Hood
09:22 PM Feature request #4252: different built-in tools calculate inconsistent polygon areas
Also see #3296 I think. Alister Hood
09:19 PM Bug report #5154 (Closed): Need to check that precision<field width when adding a column
The "New Column" button in the attribute table window allows you to add a column even if you specify a precision grea... Alister Hood
09:13 PM Bug report #5153 (Closed): Unexpected rounding in field calculator (documentation needed)
(possibly related to #3395)
If I do this I get the expected result: @4/[email protected]
If I do this I get the expected result: @0....
Alister Hood
08:50 PM Feature request #5152 (Open): ability to temporarily override or toggle all snapping
(previously #660)
It would be good if there was a way to temporarily override snapping, rather than having to turn it...
Alister Hood
10:12 AM Bug report #5151 (Feedback): OSGEO4W_ROOT not set correctly in Windows 2000
The standalone installer is based on the OSGeo4W packages, so the file layout is the same. QGIS is started with the... Jürgen Fischer
10:12 AM Bug report #5151 (Feedback): OSGEO4W_ROOT not set correctly in Windows 2000
The standalone installer is based on the OSGeo4W packages, so the file layout is the same. QGIS is started with the... Jürgen Fischer
10:12 AM Bug report #5151 (Feedback): OSGEO4W_ROOT not set correctly in Windows 2000
The standalone installer is based on the OSGeo4W packages, so the file layout is the same. QGIS is started with the... Jürgen Fischer
07:44 AM Bug report #5151 (Closed): OSGEO4W_ROOT not set correctly in Windows 2000
Installing 1.7.4 using the standalone puts the .dll files into C:\\Program Files\\QuantumGISWroclaw\\bin but the prog... Steve Hartley
06:48 AM Bug report #4952: Auto-incremental keys should not be left editable in SpatiaLite
Added patch. Skips pkuid for spatialite layers. Arunmozhi P
02:24 AM Bug report #5146 (Closed): Shapefile merge crashes in 1.7.4
andre - wrote:
> I tested now with Master and I confirm it works fine. (Win 7 Home 32bit). The problem persists in 1....
Alexander Bruy
02:24 AM Bug report #5146 (Closed): Shapefile merge crashes in 1.7.4
andre - wrote:
> I tested now with Master and I confirm it works fine. (Win 7 Home 32bit). The problem persists in 1....
Alexander Bruy
02:20 AM Bug report #5146: Shapefile merge crashes in 1.7.4
I tested now with Master and I confirm it works fine. (Win 7 Home 32bit). The problem persists in 1.7.4. andre mano

2012-03-09

11:47 PM Bug report #5146: Shapefile merge crashes in 1.7.4
This already fixed in master, 1_8 and 1_7 branches. Please check.
P.S.: damn redmine, can't change ticket status to ...
Alexander Bruy
11:47 PM Bug report #5146: Shapefile merge crashes in 1.7.4
This already fixed in master, 1_8 and 1_7 branches. Please check.
P.S.: damn redmine, can't change ticket status to ...
Alexander Bruy
12:39 PM Bug report #5146: Shapefile merge crashes in 1.7.4
it works fine in qgis-master/Linux. Can you give it a try on Windows? Giovanni Manghi
12:34 PM Bug report #5146 (Closed): Shapefile merge crashes in 1.7.4
When trying to merge shapefiles through Vector -> Data Management -> Merge Shapefiles to One, it returns error messag... andre mano
02:05 PM Bug report #5145: Segmentation fault when exiting qgis in master
for me too!
thanks!
Salvatore Larosa
01:26 PM Bug report #5145: Segmentation fault when exiting qgis in master
fix ok Etienne Tourigny
12:27 PM Bug report #5145 (Resolved): Segmentation fault when exiting qgis in master
Should be fixed now in master, commit 3e0fb86ccea4669865696f8ab0ea527b9334db95
Please test (and reopen the ticket if ...
Marco Hugentobler
09:07 AM Bug report #5145: Segmentation fault when exiting qgis in master
Sorry, the preformatted text did not work! Salvatore Larosa
09:03 AM Bug report #5145: Segmentation fault when exiting qgis in master
the same for me (that user is me! ;-)):
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff2abc4d3 in ?...
Salvatore Larosa
08:34 AM Bug report #5145 (Closed): Segmentation fault when exiting qgis in master
this has also been confirmed by another user
debug output and gdb stacktrace:...
Etienne Tourigny
12:34 PM Bug report #5133: Error in high resolution exports with transparent rasters
Ok, I see. Do you have the chance to try with a newer version (1.7.4 or current master)? Marco Hugentobler
07:03 AM Bug report #5133: Error in high resolution exports with transparent rasters
Thx.
But this line of pixel don't appears at the place where there is 2 differents slabs on the raster. It's at the s...
Alexis Viaud
05:30 AM Bug report #5133: Error in high resolution exports with transparent rasters
This is because the raster parts are drawn with a small overlap. There was a good technical for this in versions <= 1... Marco Hugentobler
10:25 AM Bug report #5135: Spurious "Password" field in some GRASS modules
Paolo Cavallini wrote:
> It is still there for me - I admit it is not a serious issue, but annoying nonetheless.
Wha...
Jürgen Fischer
10:17 AM Bug report #5135: Spurious "Password" field in some GRASS modules
It is still there for me - I admit it is not a serious issue, but annoying nonetheless. Paolo Cavallini
08:52 AM Bug report #5135 (Closed): Spurious "Password" field in some GRASS modules
Jürgen Fischer
09:13 AM Feature request #5127: Actions: add default/sample/templates
So far I have used actions in this three ways
Windows type
Open program (browser)
"PATH_PROG...
Diego Mo
08:53 AM Bug report #5134 (Closed): Expression builder: missing help message is incomplete for some operators
fixed in commit:5e2f96cd3 Jürgen Fischer
08:53 AM Bug report #5134 (Closed): Expression builder: missing help message is incomplete for some operators
fixed in commit:5e2f96cd3 Jürgen Fischer
08:46 AM Bug report #5066 (Closed): (regression) QGIS 1.7.* misdetects EPSG::25884 datasets as EPSG::2100
Fixed in changeset commit:"2f135c1d630f0f96422547c31a05c38d41997470". Jürgen Fischer
05:25 AM Bug report #5066: (regression) QGIS 1.7.* misdetects EPSG::25884 datasets as EPSG::2100
I don't know when (and why) +datum was removed from gdal output of proj.4 strings, but the problem here is that .prj ... Etienne Tourigny
07:08 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
see also #5143 Giovanni Manghi
07:04 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
Jürgen Fischer wrote:
> a bit vague. Did you check that the source and destination CRSes are picked up correctly?
H...
Giovanni Manghi
04:44 AM Bug report #5142: reprojection with towg84 parameters is broken in qgis-master
a bit vague. Did you check that the source and destination CRSes are picked up correctly? Jürgen Fischer
04:37 AM Bug report #5142 (Closed): reprojection with towg84 parameters is broken in qgis-master
While it works fine in qgis 1.7.x, it seems that in master towg84 parameters are not taken into account anymore.
I w...
Giovanni Manghi
07:08 AM Bug report #5143 (Closed): Qgis not using '+towgs' proj parameters when OTF reprojection
duplicate of #5142 Giovanni Manghi
07:08 AM Bug report #5143 (Closed): Qgis not using '+towgs' proj parameters when OTF reprojection
duplicate of #5142 Giovanni Manghi
07:07 AM Bug report #5143 (Closed): Qgis not using '+towgs' proj parameters when OTF reprojection
Latest 'release-1_7' build and current master is
not using '+towgs' proj parameters when using on-the-fly reprojectio...
Ivan Mincik

2012-03-08

12:47 AM Bug report #5097 (Closed): Dialog in Merge Shape Files
Fixed in changeset commit:"91da6af5acf4ea09218a495a1ea85dc0ccae267e". Alexander Bruy
12:10 AM Bug report #5097: Dialog in Merge Shape Files
This also affects older versions and master Alexander Bruy
12:10 AM Bug report #5097: Dialog in Merge Shape Files
This also affects older versions and master Alexander Bruy
12:02 PM Bug report #5141 (Closed): Error when reading metadata of plugin osm
I have encountere the following error several times when a startup QGIS
Error message: "Error when reading metadata ...
Zakaria Ngereja
11:40 AM Bug report #5140 (Closed): Georeferencer demands unneeded filename
Duplicate #3407 Alexander Bruy
11:40 AM Bug report #5140 (Closed): Georeferencer demands unneeded filename
Duplicate #3407 Alexander Bruy
10:08 AM Bug report #5140 (Closed): Georeferencer demands unneeded filename
When only world file should be created (linear transformation), transformation setting dialog could not be completed ... zirneklitis -
09:42 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
With current master (commit:e71494a) I haven't used "topological editing" tool, still I see MULTIPOLYGON features in ... marisn -
09:42 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
With current master (commit:e71494a) I haven't used "topological editing" tool, still I see MULTIPOLYGON features in ... marisn -
09:42 AM Bug report #2921: Avoid intersection of new polygons.. IS BROKEN
With current master (commit:e71494a) I haven't used "topological editing" tool, still I see MULTIPOLYGON features in ... marisn -
09:35 AM Bug report #4880: "add feature" tool (for polygons) + "avoid intersection" is inconsistent when i...
With current workaround in place, instead of getting annoying message, now I get crashes on saving edits. When I reve... marisn -
08:38 AM Feature request #5138 (Feedback): A window should display a message about D&D feature
I think that would be good to have a reference about the drag and drop feature; something like an info window (with a... Luca Casagrande
05:24 AM Feature request #5137 (Closed): Allow save results from RoadGraph plugin as an OGR datasource (ot...
The layer to which data is exported should be at least saved after the successful export, for further analysis. Milena Nowotarska
05:00 AM Bug report #5136 (Closed): Styles saved as QML if filename don't have .sld suffix
Saving style to SLD only possible if I manually add suffix .sld to filename in save dialog. When file type selected f... Alexander Bruy
01:28 AM Bug report #5135 (Closed): Spurious "Password" field in some GRASS modules
Recently in the interface of the following modules:
v.in.ogr.qgis
v.in.ogr.qgis.loc
r.in.gdal.qgis
r.in.gdal.qgis.lo...
Paolo Cavallini
 

Also available in: Atom