Activity

From 2009-01-05 to 2009-02-03

2009-02-03

05:14 PM Bug report #1524 (Closed): fTools resultant shape doesn't overwrite existing shape
Fixed in revision 10102.
Should also be available from the repositories as of fTools version 0.5.5
-carson
cfarmer -
05:14 PM Bug report #1524 (Closed): fTools resultant shape doesn't overwrite existing shape
Fixed in revision 10102.
Should also be available from the repositories as of fTools version 0.5.5
-carson
cfarmer -
03:41 AM Bug report #1524 (Closed): fTools resultant shape doesn't overwrite existing shape
During the definition of a geoprocessing analysis you will be asked for a resultant shape file name. When you define ... Horst Düster
04:28 PM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
I'm terribly sorry Moritz, I didn't realise that setting the ticket to worksforme, closed the ticket (though in hinds... cfarmer -
03:30 PM Bug report #1479 (Feedback): map composer: adding scalebar when view is added crashes qgis
Replying to [comment:7 cfarmer]:
> Tested following the steps outlined above. I am unable to reproduce using Ubuntu 8...
mlennert -
03:30 PM Bug report #1479 (Feedback): map composer: adding scalebar when view is added crashes qgis
Replying to [comment:7 cfarmer]:
> Tested following the steps outlined above. I am unable to reproduce using Ubuntu 8...
mlennert -
01:26 PM Bug report #1526: QgsVectorFileWriter() throws error by Postgres columns of type bigint
Replying to [comment:3 hdus]:
> mmmm....

> The export of bigint columned layer works without error message. But unf...
Jürgen Fischer
07:50 AM Bug report #1526 (Feedback): QgsVectorFileWriter() throws error by Postgres columns of type bigint
mmmm....
The export of bigint columned layer works without error message. But unfortunately the saved shape file is ...
Horst Düster
07:50 AM Bug report #1526 (Feedback): QgsVectorFileWriter() throws error by Postgres columns of type bigint
mmmm....
The export of bigint columned layer works without error message. But unfortunately the saved shape file is ...
Horst Düster
07:16 AM Bug report #1526: QgsVectorFileWriter() throws error by Postgres columns of type bigint
Replying to [comment:1 jef]:
> implemented in
Thank you very much for your lightspeedfix. Would you please commit th...
Horst Düster
07:10 AM Bug report #1526 (Closed): QgsVectorFileWriter() throws error by Postgres columns of type bigint
implemented in Jürgen Fischer
07:10 AM Bug report #1526 (Closed): QgsVectorFileWriter() throws error by Postgres columns of type bigint
implemented in Jürgen Fischer
06:36 AM Bug report #1526 (Closed): QgsVectorFileWriter() throws error by Postgres columns of type bigint
The [[QgsVectorFileWriter]]()-Method throws an error when a [[PostGIS]]-Layer contains columns of type bigint. I know... Horst Düster
05:45 AM Feature request #59 (Feedback): copy to clipboard support
Markus Neteler
05:43 AM Feature request #59: copy to clipboard support
I take liberty to reopen:
When querying a map with the identify tool, I have no clue how to copy field values from t...
Markus Neteler
05:44 AM Feature request #1078: Filtered identifiy feature
Sounds to be very useful. Adding myself. Markus Neteler
05:38 AM Bug report #1525 (Closed): graticule creator: don't use reserved SQL words as column names
The changeset r8183 introduced the use of a reserved SQL word ('Column') as column name which renders the import of a... Markus Neteler

2009-02-02

03:54 PM Feature request #1073: Recurrent search of missing layers in given directory
While I think this would be a very useful enhancement, I am changing the type to: enhancement.
-carson
cfarmer -
03:45 PM Bug report #1212 (Closed): "spatial operation on vector layer" dialog shows operatio instead of o...
This plugin is no longer available at QGIS version 1.0.0...
Suggest we close this ticket.
-carson
cfarmer -
03:45 PM Bug report #1212 (Closed): "spatial operation on vector layer" dialog shows operatio instead of o...
This plugin is no longer available at QGIS version 1.0.0...
Suggest we close this ticket.
-carson
cfarmer -
03:21 PM Bug report #1260 (Closed): graticule creator: fields "Row", "Col", "RowCol" all NULL
The graticule creator is no longer in main trunk. This is no longer an issue.
In future, please use fTools 'Vector g...
cfarmer -
03:21 PM Bug report #1260 (Closed): graticule creator: fields "Row", "Col", "RowCol" all NULL
The graticule creator is no longer in main trunk. This is no longer an issue.
In future, please use fTools 'Vector g...
cfarmer -
03:18 PM Bug report #1479 (Closed): map composer: adding scalebar when view is added crashes qgis
Tested following the steps outlined above. I am unable to reproduce using Ubuntu 8.10.
-carson
cfarmer -
03:18 PM Bug report #1479 (Closed): map composer: adding scalebar when view is added crashes qgis
Tested following the steps outlined above. I am unable to reproduce using Ubuntu 8.10.
-carson
cfarmer -
03:04 PM Bug report #1508 (Closed): fTools Geoprocessing Dissolve Crashes QGIS
problem fixed in rev. 10095
-carson
cfarmer -
03:04 PM Bug report #1508 (Closed): fTools Geoprocessing Dissolve Crashes QGIS
problem fixed in rev. 10095
-carson
cfarmer -
12:51 PM Bug report #1241 (Closed): SPIT & Identify Features crashes
fixed in commit:f6bda8b0 (SVN r10095) Jürgen Fischer
12:51 PM Bug report #1241 (Closed): SPIT & Identify Features crashes
fixed in commit:f6bda8b0 (SVN r10095) Jürgen Fischer
12:48 PM Bug report #1523 (Closed): QGIS crashes when I try to export a shapefile into PostGIS
fixed in commit:f6bda8b0 (SVN r10095) Jürgen Fischer
12:48 PM Bug report #1523 (Closed): QGIS crashes when I try to export a shapefile into PostGIS
fixed in commit:f6bda8b0 (SVN r10095) Jürgen Fischer
06:32 AM Bug report #883: Zoom to various previous extents
guys from gis-lab modified this patch for more functionality,so [email protected] better to use new version of patch attached to ... Dorofeev -
05:23 AM Bug report #883: Zoom to various previous extents
patch for this feature added Dorofeev -

2009-02-01

09:56 AM Feature request #1518: python binding does not link with libpython
Hi,
[[PyQGIS]] bindings are generated using makefiles produced by SIP. Looking at output of ldd, niether [[PyQt]]4 n...
Martin Dobias
08:59 AM Feature request #1516 (Closed): qgis 1.0.0 does not build with CXXFLAGS="-Werror=format-security"
... Jürgen Fischer
08:59 AM Feature request #1516 (Closed): qgis 1.0.0 does not build with CXXFLAGS="-Werror=format-security"
... Jürgen Fischer
08:21 AM Bug report #1523 (Closed): QGIS crashes when I try to export a shapefile into PostGIS
It connects to the database, it adds the shapefile but it crashes when I click on OK (on Intrepid AMD64). Here is the... Ilija Milicevic -

2009-01-31

12:04 AM Feature request #991 (Closed): user guide relating to on-the-fly projection indicator
added information about the projector icon change to the manual in svn trunk Otto Dassau
12:04 AM Feature request #991 (Closed): user guide relating to on-the-fly projection indicator
added information about the projector icon change to the manual in svn trunk Otto Dassau
05:22 PM Feature request #1522: Zoom to Next functionality
sip.zip - patch for C++ and python bindings, please check. Maxim Dubinin
03:18 PM Feature request #1522 (Closed): Zoom to Next functionality
we've developed a patch to add Zoom to Next functionality and extend
current Zoom to Last, basically it adds new butt...
Maxim Dubinin
03:03 PM Feature request #243: Add a feature to calculate field values in attribut tables
Exactly. It's on very hign position on my TODO list, but I haven't touch it yet. I'll do my best to implement it in F... Borys Jurgiel
11:54 AM Feature request #243: Add a feature to calculate field values in attribut tables
No, it has a _Calculate_ button, but currently not functional (to be implemented...) cdavilam -
02:48 AM Feature request #243: Add a feature to calculate field values in attribut tables
Table Manager, by Borys. Please check whether it has the functions you need. Paolo Cavallini
12:14 PM Feature request #1413: Add multi-layer selection in the legend
See ticket #783 cdavilam -
10:05 AM Bug report #1470: Build error in 1.0.0 (linguist problem in French translation), Qt 4.5.0 beta1
Apparently stable version compiles well. Please check and close the bug if appropriate Paolo Cavallini
10:03 AM Bug report #1454: Open Dialog behaves erratically on Mac: loses place, jumps around, complains of...
Still true with 1.0 final? Paolo Cavallini
09:32 AM Bug report #768: A few lib paths wrong in OSX
qgis_help is OK now.
But the Qgis Python libs are still a problem.
No word from Tom - I wonder if he's seen this? ...
William Kyngesburye
02:31 AM Bug report #768: A few lib paths wrong in OSX
Has this been fixed in 1.0? If so, please close it. Paolo Cavallini
08:53 AM Feature request #1473: 3dz/3dm/4d support
Replying to [comment:4 jef]:
> I uploaded it to http://buten.norbit.de/~jef/2d+.diff.
updated the patch to commit:dd...
Jürgen Fischer
08:06 AM Feature request #767 (Closed): Only one KML vector layer loaded
Florian, the patch looks fine. I've done some modifications to it and applied to trunk in commit:0f0f3817 (SVN r10066... Martin Dobias
08:06 AM Feature request #767 (Closed): Only one KML vector layer loaded
Florian, the patch looks fine. I've done some modifications to it and applied to trunk in commit:0f0f3817 (SVN r10066... Martin Dobias
03:15 AM Feature request #1406: psycopg2 should be added to QGIS distributions on Windows and OSX
yes, on Windows and Linux its not a big problem. It is still a problem on OS X.
as far as I know it isn't yet solved...
Andreas Neumann
02:34 AM Feature request #1406: psycopg2 should be added to QGIS distributions on Windows and OSX
Solved in OSGeo win installer. Is it the same for Mac? Paolo Cavallini
03:04 AM Feature request #879 (Closed): Add 'Help contents' in different languages
It works, at least in Italian. Please reopen it if it doesn't in other languages Paolo Cavallini
03:04 AM Feature request #879 (Closed): Add 'Help contents' in different languages
It works, at least in Italian. Please reopen it if it doesn't in other languages Paolo Cavallini
02:51 AM Feature request #1437: improve dxf plugin
In general, it is difficult to use dxf files in a GIS without conversion, because of the deeply different data model Paolo Cavallini
02:44 AM Bug report #1510 (Closed): download section in website links to tarball of 0.11 instead of 1.0.0
Paolo Cavallini
02:42 AM Bug report #1336 (Closed): loading gpx files
It seems to work. Please reopen it is still valid for qgis 1.0 Paolo Cavallini
02:42 AM Bug report #1336 (Closed): loading gpx files
It seems to work. Please reopen it is still valid for qgis 1.0 Paolo Cavallini
02:33 AM Feature request #1028: Debian package on life support
Frankie, I believe now debian files are in good shape. We are just waiting Lenny release to package qgis 1.0, aren't we? Paolo Cavallini
02:29 AM Bug report #1299 (Closed): Incomplete loading of 11.0 after using 10.0 on Intel iMac
I assume this has been fixed with new (1.0) installer. Please check with that version and reopen it if necessary. Paolo Cavallini
02:29 AM Bug report #1299 (Closed): Incomplete loading of 11.0 after using 10.0 on Intel iMac
I assume this has been fixed with new (1.0) installer. Please check with that version and reopen it if necessary. Paolo Cavallini
02:28 AM Bug report #1367 (Closed): Launch of 1.0 Preview 1 fails on Vista x64 SP1
I assume this is fixed with the new installer. Reopen it if appropriate. Paolo Cavallini
02:28 AM Bug report #1367 (Closed): Launch of 1.0 Preview 1 fails on Vista x64 SP1
I assume this is fixed with the new installer. Reopen it if appropriate. Paolo Cavallini
02:24 AM Bug report #831 (Closed): Correction to page 38 of QGIS user guide
Closed wit rev #10064 Paolo Cavallini
02:24 AM Bug report #831 (Closed): Correction to page 38 of QGIS user guide
Closed wit rev #10064 Paolo Cavallini

2009-01-30

08:29 AM Feature request #1512 (Closed): plugins/analyses menu appears twice
Borys Jurgiel
03:04 AM Feature request #1521 (Closed): add column function misses an option to define the length for str...
Adding a new string type column to the attributes of an OGR layer the default string length is 80 characters. There i... Horst Düster
03:00 AM Feature request #1520 (Closed): After adding a column for OGR-Layer, column doesn't appear in att...
When I add a column to an OGR layer it is nessecary to drop
and reload the layer from the legend to see the new column.
Horst Düster

2009-01-29

09:56 AM Feature request #767: Only one KML vector layer loaded
Hi.
I have posted the third version of my patch in bug767_090129.diff.
The dialog is now part of src/app. Therefore...
falahdab -

2009-01-28

08:32 PM Bug report #1519 (Closed): Raster image doesn't load/Georeferencing tool doesn't load raster imag...
I'm running the Windows version of QGIS 1.0 on an Intel Mac with VMFusionware and Windows XP propfessional. The prev... alyeskia -
05:25 PM Feature request #767: Only one KML vector layer loaded
Florian,
I like the changes, good work! There are some small things I would like to resolve before commiting to trun...
Martin Dobias

2009-01-27

12:20 AM Bug report #1466 (Closed): composer map has wrong resolution after reading of project file
Fixed in Marco Hugentobler
12:20 AM Bug report #1466 (Closed): composer map has wrong resolution after reading of project file
Fixed in Marco Hugentobler
03:28 PM Feature request #767: Only one KML vector layer loaded
Hi all.
wonder, thanks to your comments on my previous work.
I've posted my new work as bug767_090128.tar.gz.
The a...
falahdab -
05:58 AM Feature request #1518 (Closed): python binding does not link with libpython
python binding of qgis does not have any direct link references to libpython, which will cause undefined references w... fundawang -
05:55 AM Feature request #1517 (Closed): Wrong man page ext for qgis 1.0.0
qgis install a file named qgis.man into /usr/share/man/man1, which is wrong as it should be named as qgis.1
Please c...
fundawang -
05:52 AM Feature request #1516 (Closed): qgis 1.0.0 does not build with CXXFLAGS="-Werror=format-security"
-Werror=format-security is used to detect format string of functions like printf(), QDebug(), to ensure that the form... fundawang -
02:43 AM Bug report #1315 (Closed): "Actions" in qgis do not work on MS windows
Paolo Cavallini
02:23 AM Bug report #1315: "Actions" in qgis do not work on MS windows
I'm pretty sure this is fixed in version 1.0 and this ticket can be closed. See also #1203 which I just reopened. Mike Taves
02:26 AM Bug report #1203: QGIS segfaults when an Action with capture output has an invalid path to execut...
Note that I only have this crashing behaviour with Capture output enabled.
With Capture output disabled, everything ...
Mike Taves
02:10 AM Bug report #1203 (Feedback): QGIS segfaults when an Action with capture output has an invalid pat...
I have this issue with my Windows XP version of QGIS 1.0.0.
According to my "About" dialog, I have: "QGIS version 1....
Mike Taves
02:10 AM Bug report #1203 (Feedback): QGIS segfaults when an Action with capture output has an invalid pat...
I have this issue with my Windows XP version of QGIS 1.0.0.
According to my "About" dialog, I have: "QGIS version 1....
Mike Taves

2009-01-26

02:23 PM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
Thanks to and commit:071f3cc5 (SVN r10026) it is now blue with white font (and no longer blue with black font). Markus Neteler
11:52 AM Bug report #1515 (Closed): wms layer is added even if the the request fails
When a WMS layer is added and the requests fails, the layer is added anyway in the legend. The result is that if the ... Giovanni Manghi
10:23 AM Feature request #767: Only one KML vector layer loaded
Florian,
I've tried your plugin and it seems to work with one test layer I have.
While it does its job, I have some...
Martin Dobias
09:44 AM Feature request #1514 (Closed): Request: Default web browser action "openurl"
The most common function for a layer action is to open a particular web site in a browser. However, the present solut... Mike Taves
05:38 AM Bug report #1513 (Closed): project background color do not changes when clicking "apply"
Project background color do not changes when clicking "apply" in the "project properties menu". If the project is tha... Giovanni Manghi
05:29 AM Feature request #1512: plugins/analyses menu appears twice
Replying to [comment:3 borysiasty]:
> Sure, I'm just wondering wchich one we should leave.
It seems that the majorit...
Giovanni Manghi
05:24 AM Feature request #1512: plugins/analyses menu appears twice
Sure, I'm just wondering wchich one we should leave. Borys Jurgiel
05:19 AM Feature request #1512: plugins/analyses menu appears twice
Shortcut or not, my opinion is that it would be better to have just one menu to mantain things as clean as possible. Giovanni Manghi
05:13 AM Feature request #1512: plugins/analyses menu appears twice
It's because one of them contains a shortcut (the underlined letter "A"), while the second doesn't. I think we should... Borys Jurgiel
05:02 AM Feature request #1512 (Closed): plugins/analyses menu appears twice
Once installed the Point Sampling tool, Terrain profile and Scattergram plugins the menu plugins --> analyses appears... Giovanni Manghi

2009-01-25

12:32 PM Bug report #1511: Buffer overload when classifying ArcGIS created shapefiles
Bug may be related to "#1485":https://trac.osgeo.org/qgis/ticket/1485
matter -
12:24 PM Bug report #1511 (Closed): Buffer overload when classifying ArcGIS created shapefiles
On several shapefiles that I have tried to import the system is hard-crashing while trying to classify the values in ... matter -
10:30 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
In my case, a typical 'winbuntu' solution - I've unchecked (sic!) the 'Apply colors to non-KDE4 applications' chceckb... Borys Jurgiel
09:38 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
Aha. While Skype looks ok, also qstardict (just installed now, v0.12.9-2mdv2009.0, x86_64) suffers from that color pr... Markus Neteler
09:31 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
At mine it was affecting all qt4, but not-kde applications, so it was just a problem with passing the current KDE pal... Borys Jurgiel
09:23 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
It is not the case here, only QGIS is affected. Markus Neteler
09:11 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
Please chech whether other Qt apps have the same problem; in this case, please close the bug. Paolo Cavallini
09:17 AM Feature request #767: Only one KML vector layer loaded
Hello guys.
I've juste posted a patch to this ticket.
This patch includes:
- a modified ogrprovider which impleme...
falahdab -
05:06 AM Feature request #767: Only one KML vector layer loaded
Hi.
I started a discussion about S57 support in this thread:
http://lists.osgeo.org/pipermail/qgis-user/2009-January...
falahdab -
08:35 AM Bug report #1510 (Closed): download section in website links to tarball of 0.11 instead of 1.0.0
the page http://qgis.org/download/sources.html
contains link only to the tarball of 0.11, should instead contain the ...
oz123 -
01:28 AM Bug report #1508: fTools Geoprocessing Dissolve Crashes QGIS
Unfortunately I can't reproduce it too. But my QGIS crashes always when I try to dissolve the same layer as [[PostGIS... Horst Düster

2009-01-24

08:35 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
qtconfig -> change style to something else -> file->save
Works just fine here. Gentoo ~x86, KDE 3.5.10, Qt 4.4.2
Is ...
marisn -
02:36 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
Sure:... Markus Neteler
02:01 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
Works fro me, on Debian testing/Xfce. Could you provide more details? Paolo Cavallini
08:28 AM Bug report #1507 (Closed): fTool dissolve crashes QGIS
This is a duplicate of #1508 cfarmer -
08:28 AM Bug report #1507 (Closed): fTool dissolve crashes QGIS
This is a duplicate of #1508 cfarmer -
01:03 AM Bug report #1507 (Closed): fTool dissolve crashes QGIS
Use the attached shape for the following steps:
1. Load Shape gem_poly.shp
2. Select tools->Geoprocessing Tools->d...
Horst Düster
08:22 AM Bug report #1509 (Closed): Polygon border color is not changed for selected polygons
If polygons are set to be displayed without fill, it's impossible to see which one is selected, as border color is no... marisn -
06:36 AM Bug report #1508 (In Progress): fTools Geoprocessing Dissolve Crashes QGIS
Unable to reproduce above crash.
Tested following above steps and provided shapefile using Linux Ubuntu 8.04.
Will a...
cfarmer -
01:15 AM Bug report #1508 (Closed): fTools Geoprocessing Dissolve Crashes QGIS
Use the shape from http://www.sogis1.so.ch/sogis/dl/gempoly.zip for the following steps:
1. Load Shape gem_poly.shp...
Horst Düster

2009-01-23

12:05 AM Bug report #1506: QGIS 1.0.0: ugly blue bars making selections almost unreadable
The same in Ubuntu Intrepid/KDE 4.2. QGIS just ignores the system qt palette. In [email protected] Hardy the system colours... Borys Jurgiel
02:59 PM Bug report #1506 (Closed): QGIS 1.0.0: ugly blue bars making selections almost unreadable
Attached screenshots shows that recently (or with new QT?) menu bars and selectors have an unwanted dark-blue color. ... Markus Neteler
11:08 AM Feature request #1505 (Closed): Column wrapping in Composer Legend
The ability to force long legend lists to wrap based on the vertical dimension of the legend box would be a nice feat... John Tull
03:09 AM Bug report #1504 (Closed): WMS fails to offer CRS change for large CRS lists
By default [[GeoServer]] offers WMS with more than 3000 CRS options. When adding such WMS layer, QGIS correctly displ... marisn -
02:53 AM Feature request #259 (Feedback): Remember WMS GetCapabilities response during work session
As multiple selected layers are added to QGIS as single layer, it's common use case to add single/multiple WMS layers... marisn -
02:53 AM Feature request #259 (Feedback): Remember WMS GetCapabilities response during work session
As multiple selected layers are added to QGIS as single layer, it's common use case to add single/multiple WMS layers... marisn -

2009-01-22

03:49 PM Feature request #1503 (Closed): Impose color gradient on unique vector symbol classification
It would be good to have the Unique Value symbology assignments have the option of producing a color gradient in addi... John Tull
03:35 PM Feature request #1502 (Open): Allow vector symbol classification to affect outline color
It would be useful to have the ability to randomize outline color (or have outline color match random fill color) whe... John Tull
09:04 AM Feature request #1501 (Closed): OSX Mounted Drives Not Showing Up
I was trying to use QGIS 0.11 and 1.00 on a OS X 10.4 machine and I noticed that I cannot get to any of the drives th... justincole -

2009-01-21

10:24 PM Bug report #1500 (Closed): Blank fieldnames in new vector layers
It is possible to create a new field of any type with empty name when creating a shapefile, guess this should not be ... Maxim Dubinin
02:27 AM Bug report #1495: Add island cannot find original geometry if not on screen
I think it needs to be fixed in Milestone Ver. 1.0.1.
Am I right?
vitomeuli -
02:14 AM Feature request #1499 (Closed): improvement to WMS error handling
Applied with slight modifications in .
Thanks!
Marco
Marco Hugentobler
02:14 AM Feature request #1499 (Closed): improvement to WMS error handling
Applied with slight modifications in .
Thanks!
Marco
Marco Hugentobler
01:52 AM Feature request #1498 (Closed): Switch pop-up attributes window on and off
Applied to trunk in commit:e030ff32 (SVN r9996).
Thanks!
Marco
Marco Hugentobler
01:52 AM Feature request #1498 (Closed): Switch pop-up attributes window on and off
Applied to trunk in commit:e030ff32 (SVN r9996).
Thanks!
Marco
Marco Hugentobler

2009-01-20

12:38 AM Feature request #1496 (Closed): Setting the encoding type on new shapefiles
Err... that's embarrassing :)
I wonder how long that has been implemented? Surely it wasn't in 0.10.0? But that r...
zachariahyoder -
12:38 AM Feature request #1496 (Closed): Setting the encoding type on new shapefiles
Err... that's embarrassing :)
I wonder how long that has been implemented? Surely it wasn't in 0.10.0? But that r...
zachariahyoder -
07:54 PM Feature request #1496: Setting the encoding type on new shapefiles
Once you have defined the geometry type and attributes, then click OK, you can choose the encoding in the file save d... Steven Mizuno
03:04 AM Feature request #1496: Setting the encoding type on new shapefiles
Following cdavilam in #1310, I think Internationalisation is a better Component that Vectors in this case. zachariahyoder -
03:00 AM Feature request #1496 (Closed): Setting the encoding type on new shapefiles
It appears that the user is currently not given a choice regarding which encoding they would like to use for new shap... zachariahyoder -
11:21 PM Bug report #1495: Add island cannot find original geometry if not on screen
Tested on Windows XP and Ubuntu 8.04, same problem. vitomeuli -
05:41 PM Feature request #1499 (Closed): improvement to WMS error handling
I recently encountered an error return from a WMS service that essentially reported "file not found". This is not rep... Steven Mizuno
05:15 PM Feature request #1498 (Closed): Switch pop-up attributes window on and off
Imagine you need to digitize 1000 points without entering any attributes, just
points. If after a while pressing ok o...
Maxim Dubinin
01:06 PM Feature request #1493: Impossible to use internal ID field to label features
sorry for being not descriptive enough
I'm working with shape-files and I was hoping to be able to use internal ID fi...
Maxim Dubinin
10:55 AM Feature request #1493: Impossible to use internal ID field to label features
What data format?
Are you reffering to the IDs that QGIS applies internally to features, visible e.g. when you brows...
Maciej Sieczka -
04:25 AM Bug report #1497 (Closed): colormap edge case handling wrong for negative valued rasters
I have a single-band floating-point raster. It's 20x20 so I can see the cells.
From layer properties choose 'Colorma...
barryrowlingson -
03:02 AM Bug report #1310 (Closed): Saving/Loading Unicode data in shapefiles
I have repeated the steps described by cdavilam and it works for me in both 0.11.0 and 1.0.0 preview II (which is cal... zachariahyoder -
03:02 AM Bug report #1310 (Closed): Saving/Loading Unicode data in shapefiles
I have repeated the steps described by cdavilam and it works for me in both 0.11.0 and 1.0.0 preview II (which is cal... zachariahyoder -
02:22 AM Bug report #1310: Saving/Loading Unicode data in shapefiles
While implementing saving the encoding of a file...
Please add an option in New Vector Layer dialog to choose the en...
zachariahyoder -

2009-01-19

12:09 AM Bug report #1495 (Closed): Add island cannot find original geometry if not on screen
If I pan far enough not to have the original geometry on screen, then I cannot add the island, it says "Selected geom... vitomeuli -
11:41 PM Bug report #1469 (Closed): English Workbook won't open in Acrobat 7
I checked the english workbook link here: http://qgis.osgeo.org/documentation/workshops.html and the file http://down... Otto Dassau
11:41 PM Bug report #1469 (Closed): English Workbook won't open in Acrobat 7
I checked the english workbook link here: http://qgis.osgeo.org/documentation/workshops.html and the file http://down... Otto Dassau
10:19 AM Bug report #1469: English Workbook won't open in Acrobat 7
Please check again with the upcoming win 1.0 release and close the ticket if solved Paolo Cavallini
05:47 PM Bug report #1494 (Closed): for shapefiles: save/load of project has two problems with character ...
For shapefiles (OGR), on project save and load, there are two problems:
1. no encoding information is saved to the...
Steven Mizuno
05:25 PM Bug report #1492 (Closed): error when starting PostGIS manager
Should be fixed in version 0.4.6.
Btw. it's better to send bugreports from [[PostGIS]] manager directly to me than t...
Martin Dobias
05:25 PM Bug report #1492 (Closed): error when starting PostGIS manager
Should be fixed in version 0.4.6.
Btw. it's better to send bugreports from [[PostGIS]] manager directly to me than t...
Martin Dobias
02:19 PM Bug report #1492 (Closed): error when starting PostGIS manager
Bactktrace (lso note corrupted translation string in the first line):... Maciej Sieczka -
05:13 PM Bug report #1427 (Closed): GRASS vectors support: memory leak?
I can replicate with a large grid layer that qgis slowly leaks memory.
Fixed in (trunk) and (branch 1.0)
Martin Dobias
05:13 PM Bug report #1427 (Closed): GRASS vectors support: memory leak?
I can replicate with a large grid layer that qgis slowly leaks memory.
Fixed in (trunk) and (branch 1.0)
Martin Dobias
02:10 PM Bug report #1427 (Feedback): GRASS vectors support: memory leak?
Replying to [comment:6 pcav]:
> Please check if this still applies - I tested extensively, without problems.
> If it ...
Maciej Sieczka -
02:10 PM Bug report #1427 (Feedback): GRASS vectors support: memory leak?
Replying to [comment:6 pcav]:
> Please check if this still applies - I tested extensively, without problems.
> If it ...
Maciej Sieczka -
09:51 AM Bug report #1427 (Closed): GRASS vectors support: memory leak?
Please check if this still applies - I tested extensively, without problems.
If it still holds true, please reopen th...
Paolo Cavallini
09:51 AM Bug report #1427 (Closed): GRASS vectors support: memory leak?
Please check if this still applies - I tested extensively, without problems.
If it still holds true, please reopen th...
Paolo Cavallini
03:47 PM Feature request #1493 (Closed): Impossible to use internal ID field to label features
It is impossible to use ID to label features, which otherwise would be quite handy for just assigning numbers. Maxim Dubinin
03:01 PM Feature request #1473: 3dz/3dm/4d support
I was about to update the patch - but it has grown to large to attach.
I uploaded it to http://buten.norbit.de/~jef/2...
Jürgen Fischer
10:11 AM Feature request #1473: 3dz/3dm/4d support
Would this be the right time to apply this patch to svn? Paolo Cavallini
12:39 PM Bug report #1048 (Closed): Mapserver export writes file in wrong encoding
Fixed in (trunk) and (1.0 branch) Martin Dobias
12:39 PM Bug report #1048 (Closed): Mapserver export writes file in wrong encoding
Fixed in (trunk) and (1.0 branch) Martin Dobias
10:30 AM Bug report #1048: Mapserver export writes file in wrong encoding
The plugin has been replaced by a new one, written in python.
However, essentially the same problem seems to occur, a...
Paolo Cavallini
11:16 AM Feature request #1446 (Closed): implement add/del field for Shapefiles
Replying to [comment:6 pcav]:
> Would this be the right time to apply it to trunk?
applied in commit:98d9d513 (SVN r...
Jürgen Fischer
11:16 AM Feature request #1446 (Closed): implement add/del field for Shapefiles
Replying to [comment:6 pcav]:
> Would this be the right time to apply it to trunk?
applied in commit:98d9d513 (SVN r...
Jürgen Fischer
10:08 AM Feature request #1446: implement add/del field for Shapefiles
Would this be the right time to apply it to trunk? Paolo Cavallini
10:13 AM Bug report #1299: Incomplete loading of 11.0 after using 10.0 on Intel iMac
Does this solve the problem? Should the installer be patched, or it is enough to document the issue in the manual? Paolo Cavallini
09:56 AM Bug report #1429 (Closed): Qgis crashes when attempting to acces "Properties" of Vector Layers
Seems a local, temporary problem.
Please reopen it if it still applies to a recent version
Paolo Cavallini
09:56 AM Bug report #1429 (Closed): Qgis crashes when attempting to acces "Properties" of Vector Layers
Seems a local, temporary problem.
Please reopen it if it still applies to a recent version
Paolo Cavallini
09:54 AM Bug report #1398 (Closed): ver QGIS-0.11.0-2-Setup win installer fails
Many reports of successful installations have been reported for recent versions. The problem is therefore probably a ... Paolo Cavallini
09:54 AM Bug report #1398 (Closed): ver QGIS-0.11.0-2-Setup win installer fails
Many reports of successful installations have been reported for recent versions. The problem is therefore probably a ... Paolo Cavallini
09:37 AM Bug report #1372 (Closed): Crash when using postgis layers with symbology "continous colors"
Does this still apply with a recent version? If so, please reopen the bug Paolo Cavallini
09:37 AM Bug report #1372 (Closed): Crash when using postgis layers with symbology "continous colors"
Does this still apply with a recent version? If so, please reopen the bug Paolo Cavallini
09:32 AM Bug report #1392: Map Composer Stalls on png export
If it's only slowness, it seems appropriate to downgrade its importance Paolo Cavallini
09:27 AM Bug report #1272 (Closed): adding a GRASS raster crashes QGIS
Tested with spearfish, and it works. Please check whether it is a local problem on your computer and reopen it if nec... Paolo Cavallini
09:27 AM Bug report #1272 (Closed): adding a GRASS raster crashes QGIS
Tested with spearfish, and it works. Please check whether it is a local problem on your computer and reopen it if nec... Paolo Cavallini
06:51 AM Bug report #1310: Saving/Loading Unicode data in shapefiles
If I select utf-8 encoding when I load a shapefile into a qgis project, non ASCII characters are correctly displayed,... cdavilam -

2009-01-18

12:03 AM Bug report #1310 (Feedback): Saving/Loading Unicode data in shapefiles
Please try it again with a Unicode encoding, such as UTF-8.
Here are some examples you can cut and paste to try:
ポイ...
zachariahyoder -
12:03 AM Bug report #1310 (Feedback): Saving/Loading Unicode data in shapefiles
Please try it again with a Unicode encoding, such as UTF-8.
Here are some examples you can cut and paste to try:
ポイ...
zachariahyoder -
11:30 PM Bug report #1402 (Closed): Open attribute table hangs when a ShapeFile layer has usaved changes
Thanks! It works in 1.0.0-Kore-preview1. zachariahyoder -
11:30 PM Bug report #1402 (Closed): Open attribute table hangs when a ShapeFile layer has usaved changes
Thanks! It works in 1.0.0-Kore-preview1. zachariahyoder -
06:16 PM Bug report #1491 (Closed): Continuous Color symbology may classify on wrong field for PostGIS layers
For [[PostGIS]] layers where the attribute columns are not first and contiguous the Continuous Color symbolizer may c... Steven Mizuno
05:25 PM Bug report #981 (Closed): Attribute Table sorting not working as expected
Testing with
For number types, I have tried a mix of standard numeric notation and scientific notation and find tha...
Steven Mizuno
05:25 PM Bug report #981 (Closed): Attribute Table sorting not working as expected
Testing with
For number types, I have tried a mix of standard numeric notation and scientific notation and find tha...
Steven Mizuno

2009-01-17

02:30 AM Feature request #1411: ecw support
Replying to "gespiel":/issues/show/1411:
> I found a gdal win32 with ecw support lib on http://download.osgeo.org/gda...
Gerhard Spieles

2009-01-16

06:31 PM Bug report #1485: crashes when playing with symbology - GDAL issue
I can verify this issue on Intrepid 32bit, and believe it revolves around dbf field types.
When you try to run the cl...
Alex Mandel
01:10 PM Bug report #1490 (Closed): typo: 'actioMoveVertex' throughout code
fixed in commit:7cd83173 (SVN r9978). It also fixes actionDelerteVertex() and two other typos in comments Jürgen Fischer
01:10 PM Bug report #1490 (Closed): typo: 'actioMoveVertex' throughout code
fixed in commit:7cd83173 (SVN r9978). It also fixes actionDelerteVertex() and two other typos in comments Jürgen Fischer
10:13 AM Bug report #1490 (Closed): typo: 'actioMoveVertex' throughout code
if you do dir(iface) you'll see "actioMoveVertex" instead of "actionMoveVertex". Seems to be a search/replace gone wr... barryrowlingson -
09:26 AM Bug report #1487: QGIS fails to recognise Shapefile projection
Tim,
It was suggested you are a QGIS CRS guru of sorts, and I have taken the liberty of adding you to the cc list. ...
Frank Warmerdam -
06:06 AM Bug report #1489 (Closed): GRASS Plugin: Map name input field not working correctly for modules t...
E.g.: open the "r.patch" module dialog. You will see the
"Type in map names .." field, which works just fine.
But the...
benducke -
05:06 AM Bug report #1488 (Closed): print composer: cannot change background colour of the map
The colour of the frame can be changed, as well as the background of the legend, but not that of the background for t... Paolo Cavallini

2009-01-15

08:51 PM Bug report #1487: QGIS fails to recognise Shapefile projection
No match is found because the EPSG:3059 entry in the srs.db includes a towgs84 parameter lacking in the ESRI .prj fil... Frank Warmerdam -
10:39 AM Bug report #1487: QGIS fails to recognise Shapefile projection
I have confirmed on my machine that the SRS does not appear in the vector layer metadata properties dialog. The debu... Frank Warmerdam -
10:27 AM Bug report #1487 (Closed): QGIS fails to recognise Shapefile projection
When loading shapefile with defined projection into QGIS 1.0.0 pr2, it shows up as layer without coordinate informati... marisn -
02:36 AM Feature request #1354: Ambiguous GUI label "Capture" for map editing tools
As Spanish speaker and translator, I also find "Create" or "New" would be better terms than "Capture", but if it is O... cdavilam -
02:28 AM Feature request #748: Edit vertices within a polygon, polyline vector layers
QGIS 1.0.0 still lacks this feature that would be really a big improvement for digitizing. Maybe adding the possibili... cdavilam -

2009-01-14

11:50 AM Feature request #266 (Closed): Some wishes for enhancing printing functionality
This is all done with the print composer enhancements. Marco Hugentobler
11:50 AM Feature request #266 (Closed): Some wishes for enhancing printing functionality
This is all done with the print composer enhancements. Marco Hugentobler
10:05 AM Feature request #1444 (Closed): Null labels display as "Label"
If you delete the default text from the combo box, "label" does not appear. This option is meant to let people specif... Paolo Cavallini
10:05 AM Feature request #1444 (Closed): Null labels display as "Label"
If you delete the default text from the combo box, "label" does not appear. This option is meant to let people specif... Paolo Cavallini
10:02 AM Bug report #1401 (Closed): open saved project in preview 1 with release preview 2, qgis crash
Known issue: project files are not back compatible until version 1.0 stable. Paolo Cavallini
10:02 AM Bug report #1401 (Closed): open saved project in preview 1 with release preview 2, qgis crash
Known issue: project files are not back compatible until version 1.0 stable. Paolo Cavallini
09:43 AM Bug report #1389 (Closed): The config file (/grass/config/default.qgc) not found
I think this is a local problem on your machine. Paolo Cavallini
09:43 AM Bug report #1389 (Closed): The config file (/grass/config/default.qgc) not found
I think this is a local problem on your machine. Paolo Cavallini
07:25 AM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
Step-by-step:
using a shape of the administrative boundaries of Belgium (you can download it on "launch qgis[[BR":h...
alicebtoklas -
02:58 AM Bug report #1486 (Closed): "cannot find key r" when opening v.in.ogr. modules
Should be fixed in rev. #9970. Please check, and backport to 1.0 Paolo Cavallini
02:58 AM Bug report #1486 (Closed): "cannot find key r" when opening v.in.ogr. modules
Should be fixed in rev. #9970. Please check, and backport to 1.0 Paolo Cavallini
02:26 AM Bug report #1486 (Closed): "cannot find key r" when opening v.in.ogr. modules
opening modules v.in.ogr.qgm and v.in.ogr.all.qgm
a message box "cannot find key r" appears;
only 3d check is shown;...
enricogallo -

2009-01-13

04:24 PM Bug report #1485 (Closed): crashes when playing with symbology - GDAL issue
When I open the dataset, change the symbology to graduated and try to create 5 classes, it crashes on me.
This does n...
Ilija Milicevic -
07:01 AM Feature request #1016 (Closed): mysterious white box obscures data in the map window
Marco Hugentobler
06:58 AM Feature request #1016: mysterious white box obscures data in the map window
Applied to trunk and to 1.0 branch.
Thanks!
Marco
Marco Hugentobler
03:14 AM Bug report #1484 (Closed): qgis crashes while editing a layer in a project with missing layers
1. open a new project
2. load a vector layer (shape file)
3. save the project
4. move the shape file to an other loca...
cmoe -

2009-01-12

10:44 PM Feature request #1483: Possibility to copy and paste a layer
I thought of duplicating the layer on the layer's list.
But maybe creating a duplicate shapefile in this way is also ...
bjpfei -
10:50 AM Feature request #1483: Possibility to copy and paste a layer
What is the purpose of this functionality - to actually create a duplicate Shapefile, or to duplicate the layer on th... Maciej Sieczka -
04:06 AM Feature request #1483 (Closed): Possibility to copy and paste a layer
It would be great to have the possibility to copy and paste a layer in the legend.
1.) right mouse click on the lay...
bjpfei -
08:13 PM Feature request #859: Assign vector colors from column
That format was exactly my thinking. I really hope to see this sometime. Otherwise, going from a raster to a vector A... John Tull
05:05 PM Feature request #859: Assign vector colors from column
Hi all!
Any news with respect to assigning colors from an RGB list (=column in a vector map's attribute table)? And ...
nikos -

2009-01-11

10:06 AM Bug report #915 (Closed): Importing MIF polygon does not work in 0.9.1
The attached file does not appear a valid resource. I regularly open [[MapInfo]] files without problems, so it may be... Paolo Cavallini
10:06 AM Bug report #915 (Closed): Importing MIF polygon does not work in 0.9.1
The attached file does not appear a valid resource. I regularly open [[MapInfo]] files without problems, so it may be... Paolo Cavallini

2009-01-10

11:24 PM Bug report #1198 (Closed): Open attribute table hangs when a postGIS layer has pending copy from ...
Checked, it seems to work on 1.0. I'm closing it, please check wioth latest QGIS (1.0) and reopen it if necessary. Th... Paolo Cavallini
11:24 PM Bug report #1198 (Closed): Open attribute table hangs when a postGIS layer has pending copy from ...
Checked, it seems to work on 1.0. I'm closing it, please check wioth latest QGIS (1.0) and reopen it if necessary. Th... Paolo Cavallini
11:05 PM Feature request #480: clip based on extent of other dataset(s)
Seems a good task for a python plugin. Paolo Cavallini
10:57 PM Bug report #1002 (Closed): SIP-related Compile errors
So closing it for now. Reopen it if necessary. Paolo Cavallini
10:57 PM Bug report #1002 (Closed): SIP-related Compile errors
So closing it for now. Reopen it if necessary. Paolo Cavallini
09:13 AM Bug report #1002: SIP-related Compile errors
For me (Mandriva Linux 2009.0, 64bit) it is fixed. Markus Neteler
08:36 AM Bug report #1002: SIP-related Compile errors
Is this still valid? I cannot see these errors on my debian boxes. Paolo Cavallini
05:53 PM Feature request #1016 (Feedback): mysterious white box obscures data in the map window
I reopen this ticket as I now have a good explanation of why the problem occurs and a further patch to fix it.
After...
Steven Mizuno
05:53 PM Feature request #1016 (Feedback): mysterious white box obscures data in the map window
I reopen this ticket as I now have a good explanation of why the problem occurs and a further patch to fix it.
After...
Steven Mizuno
08:47 AM Bug report #1268: crash due to an unhandled GEOSException
I confirm: the sample file loads without errors, but nothing is shown. On file (.dbf) of the three canonicals is miss... Paolo Cavallini
05:05 AM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
I cannot reproduce this crash on my kubuntu 8.10 system, both with 1.0 branch and head. Is it possible that you attac... Marco Hugentobler
03:54 AM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
Also on Debian leolami -
05:04 AM Bug report #1452: crash loading big shapefile
I have isolated the smalest single polygon that crashes Xorg when loaded to QGIS. It's 2.5 MB. You can download it at... Maciej Sieczka -
04:29 AM Feature request #566: Load multiple GRASS maps into QGIS
See also #1195 and #1326 (duplicates of this one, now closed) Paolo Cavallini
04:28 AM Feature request #1326 (Closed): multiple selection for GRASS vector/raster
Duplicate of #566 Paolo Cavallini
04:28 AM Feature request #1326 (Closed): multiple selection for GRASS vector/raster
Duplicate of #566 Paolo Cavallini
04:28 AM Feature request #1195 (Closed): Option to load multiple grass rasters
Duplicate of #566 Paolo Cavallini
04:28 AM Feature request #1195 (Closed): Option to load multiple grass rasters
Duplicate of #566 Paolo Cavallini

2009-01-08

03:13 PM Feature request #1482 (Closed): Add accessors to QgsVectorLayer
I think it will be useful to add accessors in the [[QgsVectorLayer]] class for private members. For instance :
con...
oliviert -
08:43 AM Bug report #1481 (Closed): markers in point symbology dialog are draggable
create a vector layer of points, go Properties, Symbology tab, then you can drag n drop the various markers around (c... barryrowlingson -
07:37 AM Bug report #1480 (In Progress): Strange behavior of set default qml style for indexed rasters
I actually see several problems and I am surprised they have not come up before...
Part of the back trace:...
ersts -

2009-01-07

01:56 PM Bug report #1480 (Closed): Strange behavior of set default qml style for indexed rasters
- Load indexed raster
- Open properties
- Color table
- Change a couple of colors
- Save as default
- Ok
- Try to loa...
Maxim Dubinin
12:44 PM Feature request #1478 (Closed): Coordinate Capture plugin - fixes and enhancements
I dont think using QGIS internal CRS is a concern here since this plugin is being used in an internal context.
SMizu...
Tim Sutton
12:44 PM Feature request #1478 (Closed): Coordinate Capture plugin - fixes and enhancements
I dont think using QGIS internal CRS is a concern here since this plugin is being used in an internal context.
SMizu...
Tim Sutton
11:17 AM Bug report #1402: Open attribute table hangs when a ShapeFile layer has usaved changes
Please test with 1.0 preview release from QGIS download page and report back here. Maciej Sieczka -
05:29 AM Bug report #1479 (Closed): map composer: adding scalebar when view is added crashes qgis
In the map composer, when the map is already added, adding the scalebar crashes QGIS. The following error message is ... alicebtoklas -
02:46 AM Bug report #1450 (Closed): Adding the Attribute Table DockWidget doesn't update canvas extent
Replying to [comment:4 borysiasty]:
> Yes, now is fine. Can we patch also the 1.0.x branch?
applied in
Jürgen Fischer
02:46 AM Bug report #1450 (Closed): Adding the Attribute Table DockWidget doesn't update canvas extent
Replying to [comment:4 borysiasty]:
> Yes, now is fine. Can we patch also the 1.0.x branch?
applied in
Jürgen Fischer
02:02 AM Bug report #981: Attribute Table sorting not working as expected
does fix this? Jürgen Fischer

2009-01-06

09:57 PM Feature request #1478: Coordinate Capture plugin - fixes and enhancements
Replying to "smizuno":/issues/show/1478:
> I have changed the overall handling of the user selected CRS to use QGIS ...
Maciej Sieczka -
08:07 PM Feature request #1478 (Closed): Coordinate Capture plugin - fixes and enhancements
I have found the Coordinate Capture tool very useful, but have found the following deficiencies:
1. the projection s...
Steven Mizuno
01:52 PM Bug report #1477 (Closed): make install fails an doc/cmake_install.cmake:36
fixed in Jürgen Fischer
01:52 PM Bug report #1477 (Closed): make install fails an doc/cmake_install.cmake:36
fixed in Jürgen Fischer
11:23 AM Bug report #1477 (Closed): make install fails an doc/cmake_install.cmake:36
... Maciej Sieczka -
03:19 AM Bug report #1467 (Closed): In QML and QGS saved labels will not be reloaded to a layer
I think this is fixed in . The problem was that the label class assumed the attribute indices from 0 to number of att... Marco Hugentobler
03:19 AM Bug report #1467 (Closed): In QML and QGS saved labels will not be reloaded to a layer
I think this is fixed in . The problem was that the label class assumed the attribute indices from 0 to number of att... Marco Hugentobler
02:34 AM Bug report #1467: In QML and QGS saved labels will not be reloaded to a layer
I made some tests and it looks that the problem appears only with [[PostGIS]] layer. When I save and reload a project... Horst Düster

2009-01-05

07:10 PM Bug report #996: Re: [Quantum GIS] #996: QGIS corrupts JPEG2000 colors
Regarding http://trac.osgeo.org/gdal/ticket/2732#comment:14
The color display problem with GDAL Kakadu based JP2KAK ...
coatman -
08:31 AM Bug report #996: Re: [Quantum GIS] #996: QGIS corrupts JPEG2000 colors
Replying to [comment:56 jef]:
> The jasper support in GDAL was fixed (see "GDAL Ticket #2399":http://trac.osgeo.org/g...
Jürgen Fischer
11:42 AM Bug report #1476 (Closed): Repeated click on Unique Value's Classify button produces extraneous c...
Repeated clicks on Classify button in Layer Property>Symbology>Unique Value produces extraneous classes when dealing ... cgsbob -
10:44 AM Feature request #1475 (Closed): Crash on opening project after moving GRASS-GISDBASE
Dear QGIS developers,
When opening a QGIS project which contains GRASS layers which have been moved, QGIS gives an e...
grasslandtom -
08:20 AM Feature request #1474 (Closed): make GDAL driver selectable

This is a duplicate of ticket #182
In summary, GDAL uses the first appropriate driver it comes to. You can use the ...
ersts -
08:20 AM Feature request #1474 (Closed): make GDAL driver selectable

This is a duplicate of ticket #182
In summary, GDAL uses the first appropriate driver it comes to. You can use the ...
ersts -
03:23 AM Bug report #1467: In QML and QGS saved labels will not be reloaded to a layer
Replying to [comment:1 jef]:
> not reproducable here. maybe fixed with commit:270fe71f (SVN r9748) and/or ?
No this...
Horst Düster
 

Also available in: Atom