Activity

From 2009-09-08 to 2009-10-07

2009-10-07

10:10 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
This is not OS dependent, it is caused by a change of API between SIP 4.8 and 4.9. The version of SIP should be tested. vince -
09:02 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
Replying to [comment:5 vince]:
> Ah, apologies, I just cut/pasted out of a tcl script (Macports), where some characte...
John Tull
02:13 PM Bug report #1972: Font size for labels is limited to 99
I would say that this bug is the same of #1942, just on the other end.
If you agree I will close this as duplicate a...
Giovanni Manghi
12:11 PM Bug report #1969: Measure tools and scale give wrong readings with OTFR disabled
Replying to [comment:6 lutra]:
> Hi,
> did you made any further test?
> Can you relate your problem with the behaviou...
vince -
11:56 AM Bug report #1969: Measure tools and scale give wrong readings with OTFR disabled
Replying to [comment:4 vince]:
> You're right, it does only happen for a single layer and a single projection. Bad lu...
Giovanni Manghi
10:49 AM Bug report #1980 (Closed): Print composer print an A0 pdf as A4
Fixed in commit:48402812 (SVN r11767) Marco Hugentobler
10:49 AM Bug report #1980 (Closed): Print composer print an A0 pdf as A4
Fixed in commit:48402812 (SVN r11767) Marco Hugentobler
09:55 AM Bug report #1961 (Closed): Relative path with spatialite driver
should be fixed in commit:4ed28f36 (SVN r11763) Jürgen Fischer
09:55 AM Bug report #1961 (Closed): Relative path with spatialite driver
should be fixed in commit:4ed28f36 (SVN r11763) Jürgen Fischer
05:52 AM Bug report #1971: print composer crashes when adding image path
>If I add an image to a map composer, the icon remains pressed, and nothing happens until I click on the page
Yes, t...
Marco Hugentobler

2009-10-06

01:01 AM Bug report #1758 (Feedback): Tools (Ftools): clip and difference tools give the same results
Now clip and difference seem to give the same result Paolo Cavallini
01:01 AM Bug report #1758 (Feedback): Tools (Ftools): clip and difference tools give the same results
Now clip and difference seem to give the same result Paolo Cavallini
12:05 AM Bug report #1917: [Vista] GRASS module v.out.* crashes
All the module belonging to the v.out.* category seem to give the same result.
This is still valid with the lastest ...
Giovanni Manghi
11:56 PM Bug report #1981 (Closed): Print composer print an A0 pdf as A4
I don't know why the trac replicated 3 times this ticket opened by me Giovanni Manghi
11:56 PM Bug report #1981 (Closed): Print composer print an A0 pdf as A4
I don't know why the trac replicated 3 times this ticket opened by me Giovanni Manghi
11:55 PM Bug report #1982 (Closed): Print composer print an A0 pdf as A4
I don't know why the trac replicated 3 times this ticket opened by me Giovanni Manghi
11:55 PM Bug report #1982 (Closed): Print composer print an A0 pdf as A4
I don't know why the trac replicated 3 times this ticket opened by me Giovanni Manghi
11:53 PM Bug report #1916: (windows) : "Access violation - No RTTI Data!"
I have seen this popping out on a Vista machine of a friend... just once while working in the legend, without annoyin... Giovanni Manghi
11:21 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
Ah, apologies, I just cut/pasted out of a tcl script (Macports), where some characters must be escaped. The right com... vince -
11:40 AM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
I tried the above suggestion, but got an error with the sed command. My sed knowledge is not enough to sort out the i... John Tull
03:56 AM Bug report #1984 (Closed): QGIS Doesn't send VERSION parameter on WMS getCapabilities request
Hi,
Althought not mandatory in WMS specs, the VERSION parameter has become important since most WMS servers now offer...
guillaume -
02:34 AM Feature request #1983 (Closed): Visual notice of scale-based layer visibility
It would be nice if the layer/legend manager gave a visual representation
of scale-based layer visibility.
For exa...
Sandro Santilli

2009-10-05

09:08 PM Bug report #1959: Trunk build fails with sip-4.9 and PyQt-4.6
Try this on the python/core directory:... vince -
12:38 PM Bug report #1982 (Closed): Print composer print an A0 pdf as A4
Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then...
Giovanni Manghi
12:21 PM Bug report #1981 (Closed): Print composer print an A0 pdf as A4
Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then...
Giovanni Manghi
12:14 PM Bug report #1980 (Closed): Print composer print an A0 pdf as A4
Tested on qgis trunk on Debian and Ubuntu.
Open the print composer, choose A0 as paper size, compse the map and then...
Giovanni Manghi
09:17 AM Bug report #1977: spatialite layers disappear when enabling reprojection
Right - if I do the same in a different projection, this does not appear. Paolo Cavallini
09:07 AM Bug report #1977: spatialite layers disappear when enabling reprojection
not reproducable here. Are you projecting to the same CRS your data is in? Jürgen Fischer
09:00 AM Bug report #1977 (Closed): spatialite layers disappear when enabling reprojection
Load a [[SpatiaLite]] layer; enable on the fly reprojection; the layer is no longer shown on the canvas. If you load ... Paolo Cavallini
09:06 AM Bug report #1979 (Closed): ILWIS raster map filter not working
When loading a raster, if you select the ILWIS filter for file names (*.mpr/mpl), files with extension mpr are not sh... Paolo Cavallini
09:02 AM Bug report #1976 (Closed): print composer: menu bar can be removed, not put back
duplicate of #1668 Giovanni Manghi
09:02 AM Bug report #1976 (Closed): print composer: menu bar can be removed, not put back
duplicate of #1668 Giovanni Manghi
08:56 AM Bug report #1976 (Closed): print composer: menu bar can be removed, not put back
In the print composer window, if you right-click on the menu bar, you can make the menu bar disappear. I did not find... Paolo Cavallini
09:00 AM Bug report #1978 (Closed): QGIS take ages to open big (or just complex) vectors
Hi,
I noticed that while trying open a quite big shapefile
http://www.iucnredlist.org/resources/spatial/mammals/cet...
Giovanni Manghi
06:40 AM Feature request #1975: ability to create legend groups via the QGis api
This feature was already requested already in the middle of some discussion here in the Trac :) very useful indeed +1 Giovanni Manghi
06:35 AM Feature request #1975 (Closed): ability to create legend groups via the QGis api
Using the QGis API it is possible to add layers to the currently opened project using the function addMapLayer() of t... leaffan -
06:10 AM Feature request #1974 (Closed): Enable render caching where possible
User story 1:
Joe is reordering layers, each of which points back to a postgis database with thousands of records. E...
Tim Sutton

2009-10-04

02:52 PM Bug report #1959 (Feedback): Trunk build fails with sip-4.9 and PyQt-4.6
Replying to [comment:1 jctull]:
> With qt-4.5.3, this appears to be fixed.
I jumped the gun. Still unable to build w...
John Tull
02:52 PM Bug report #1959 (Feedback): Trunk build fails with sip-4.9 and PyQt-4.6
Replying to [comment:1 jctull]:
> With qt-4.5.3, this appears to be fixed.
I jumped the gun. Still unable to build w...
John Tull
12:34 PM Bug report #1959 (Closed): Trunk build fails with sip-4.9 and PyQt-4.6
With qt-4.5.3, this appears to be fixed. John Tull
12:34 PM Bug report #1959 (Closed): Trunk build fails with sip-4.9 and PyQt-4.6
With qt-4.5.3, this appears to be fixed. John Tull

2009-10-03

01:50 AM Bug report #1969: Measure tools and scale give wrong readings with OTFR disabled
I found a way to easy replicate the behaviour. I guess.
Open a new project, in my case by default it opens in wgs84...
Giovanni Manghi
03:26 AM Bug report #1969: Measure tools and scale give wrong readings with OTFR disabled
You're right, it does only happen for a single layer and a single projection. Bad luck, the layer is not free so I ca... vince -
01:45 PM Feature request #1973 (Closed): Projet name has to be separate of the QGIS version in the title b...
Fixed with r commit:943a3122 (SVN r11747) Tim Sutton
01:45 PM Feature request #1973 (Closed): Projet name has to be separate of the QGIS version in the title b...
Fixed with r commit:943a3122 (SVN r11747) Tim Sutton
08:15 AM Feature request #1973 (Closed): Projet name has to be separate of the QGIS version in the title b...
In the title bar of the main window, title of the project (or name of the project file) appear just after the name of... mav -
08:00 AM Feature request #1276: Allow for smaller icon display
As you can see on the capture, toolbar buttons are note resized to match icons size. There's always a lot of unused p... mav -
03:31 AM Bug report #1972 (Closed): Font size for labels is limited to 99
I cannot set the size of labels to more than 99 units. While it seems crazy to print labels of 1000 font point size, ... vince -

2009-10-02

12:16 AM Bug report #1971: print composer crashes when adding image path
Furthermore, adding a valid path does not persiste across images (if I add a second image, I have to add my path again) Paolo Cavallini
12:11 AM Bug report #1971 (Closed): print composer crashes when adding image path
If I add an image to a map composer, the icon remains pressed, and nothing happens until I click on the page. If I tr... Paolo Cavallini
12:00 AM Bug report #1955 (Closed): QGis segfaults unless I am root
This should be related to your GRASS version (too old) - please try with a grass64. Thanks. Paolo Cavallini
12:00 AM Bug report #1955 (Closed): QGis segfaults unless I am root
This should be related to your GRASS version (too old) - please try with a grass64. Thanks. Paolo Cavallini
11:39 PM Bug report #1969: Measure tools and scale give wrong readings with OTFR disabled
Not replicable here. Can you check in which condition does this happen? Only with particular data or projections mayb... Paolo Cavallini
09:57 AM Bug report #1969 (Closed): Measure tools and scale give wrong readings with OTFR disabled
In 1.3.0, the area measurement tool sometimes goes daft. Proof on the attached screenshot. vince -
11:36 PM Feature request #1970: label placement
It does not work as expected, but given that there is a simple workaround, I would classify this as minor Paolo Cavallini
09:48 PM Feature request #1970 (Closed): label placement
When using the placement option from a Data Field the left and right are swapped.
ie, a field that says left puts th...
Alex Mandel
12:48 PM Bug report #1921 (Closed): Unexpected clearing of QgsApplication::mPkgDataPath
Maxim Dubinin
06:21 AM Bug report #1966: qgis don't start after grass upgrade
Replying to "torstenosgeo":/issues/show/1966:
> Hallo,
Auch Hallo ;)
> it is temporarely possible to install grass6...
Jürgen Fischer
02:27 AM Bug report #1966 (Closed): qgis don't start after grass upgrade
Not a QGIS issue: the package is not aligned to testing. Please note that the package is not official, and until we'l... Paolo Cavallini
02:27 AM Bug report #1966 (Closed): qgis don't start after grass upgrade
Not a QGIS issue: the package is not aligned to testing. Please note that the package is not official, and until we'l... Paolo Cavallini
02:36 AM Bug report #1964 (Closed): qgis crashes after start
See #1966 Paolo Cavallini
02:36 AM Bug report #1964 (Closed): qgis crashes after start
See #1966 Paolo Cavallini

2009-10-01

12:45 AM Bug report #1965: qgis crashes after start
Replying to [comment:1 lutra]:
> is this duplicate of #1965? reopen if necessary
I meant #1964
Giovanni Manghi
12:44 AM Bug report #1965 (Closed): qgis crashes after start
is this duplicate of #1965? reopen if necessary Giovanni Manghi
12:44 AM Bug report #1965 (Closed): qgis crashes after start
is this duplicate of #1965? reopen if necessary Giovanni Manghi
12:12 AM Bug report #1965 (Closed): qgis crashes after start
Package: qgis
Version: 1.3.0~gfossit20090914-1
Severity: important
Hallo,
qgis crashes after start. On the console I...
torstenosgeo -
12:43 AM Feature request #62: Qgis only supports postgres keys of type int
What prevents us from applying this patch? Paolo Cavallini
12:39 AM Feature request #1968 (Closed): change icon for OGR Layer Converter plugin
Currently the plugin OGR Layer Converter is presented with the "GDAL" icon. Perhaps it is better to change it so it d... nikos -
12:29 AM Feature request #1563 (Closed): Raster: tile indexes
Done with buildvrt, in GDAL tools plugin https://trac.faunalia.it/GdalTools-plugin Paolo Cavallini
12:29 AM Feature request #1563 (Closed): Raster: tile indexes
Done with buildvrt, in GDAL tools plugin https://trac.faunalia.it/GdalTools-plugin Paolo Cavallini
12:15 AM Bug report #1967 (Closed): no version information available for some libs
Package: grass
Version: 6.4.0~rc4-3
Severity: normal
Hallo,
I get the error/warning messages:
v.label: /usr/lib/libi...
torstenosgeo -
12:14 AM Bug report #1966 (Closed): qgis don't start after grass upgrade
Package: qgis
Version: 1.1.0~gfossit20090602-1
Severity: normal
Hallo,
it is temporarely possible to install grass6....
torstenosgeo -
11:38 PM Bug report #1964 (Closed): qgis crashes after start
Hallo,
qgis crashes after start. On the console I get the following messeges:
qgis
/usr/bin/qgis.bin: /usr/lib/libidn...
torstenosgeo -
11:46 AM Bug report #1963 (Closed): "Ghost Lines" when using Anti-aliasing, polygons with shared boundarie...
QT's anti-aliasing output exhibits an inherent limitation of AA, where polygon edges are drawn/feathered twice and th... springmeyer -
08:02 AM Feature request #1960: more icon sets
I dont think these are a good candidate - the icons are tiny and there are no 'source' files in order to allow us to ... Tim Sutton
07:04 AM Feature request #1962 (Closed): bigint types in graduated or continuos color symbology are not co...
Applied in commit:77c03ad4 (SVN r11741). Many thanks. Tim Sutton
07:04 AM Feature request #1962 (Closed): bigint types in graduated or continuos color symbology are not co...
Applied in commit:77c03ad4 (SVN r11741). Many thanks. Tim Sutton
06:55 AM Feature request #1962: bigint types in graduated or continuos color symbology are not considered ...
int8_classify.patch fixes the problem in both 'graduated' and 'continuos' thematizations.
reviews welcome.
Sandro Santilli
05:52 AM Feature request #1962: bigint types in graduated or continuos color symbology are not considered ...
additional note, the type query returns 'int8' as looks to be expected by code in qgspostgresprovider.cpp constructor. Sandro Santilli
05:35 AM Feature request #1962: bigint types in graduated or continuos color symbology are not considered ...
Sorry, another thing I haven't specified is that data access is trough postgres.
That's where 'bigint' and 'numeric' ...
Sandro Santilli
05:26 AM Feature request #1962: bigint types in graduated or continuos color symbology are not considered ...
Forgot to mention the dataset source:
ftp://ftp.gwdg.de/pub/linux/intevation/freegis/worlddata/
Sandro Santilli
05:25 AM Feature request #1962 (Closed): bigint types in graduated or continuos color symbology are not co...
While playing a bit with freegis country data r1 I found that qgis symbology manager
doesn't allow to use fields of t...
Sandro Santilli

2009-09-30

11:46 AM Bug report #1961 (Closed): Relative path with spatialite driver
Hi all,
On the qgis 1.4.0 trunk (windows Vista).
I see the option to save project with relative path don't work wit...
aperi2007 -
10:27 AM Feature request #1960 (Closed): more icon sets
It would seem appropriate adding these sets of icons:
http://projects.opengeo.org/geosilk
http://blog.opengeo.org/2...
Paolo Cavallini
06:38 AM Feature request #243 (Closed): Add a feature to calculate field values in attribut tables
A field calculator is available from
commit:59a486bd (SVN r11736) on (more operators will follow)
Marco
Marco Hugentobler
06:38 AM Feature request #243 (Closed): Add a feature to calculate field values in attribut tables
A field calculator is available from
commit:59a486bd (SVN r11736) on (more operators will follow)
Marco
Marco Hugentobler
02:57 AM Bug report #1796: Multi-line text in a SVG file is not drawn correctly in Print Composer
Replying to [comment:6 mhugent]:
> This is most likely a bug in the Qt svg code
Marco, are you able to report this o...
craigleat -
02:31 AM Bug report #1796: Multi-line text in a SVG file is not drawn correctly in Print Composer
This is most likely a bug in the Qt svg code Marco Hugentobler

2009-09-29

02:16 PM Bug report #1959 (Closed): Trunk build fails with sip-4.9 and PyQt-4.6
Build errors out on OS X using latest sip and pyqt releases (also qt-4.5.2-cocoa):
...
Creating qgisconfig.py...
Don...
John Tull
11:38 AM Bug report #1914: Relative paths aren't stored for GRASS layers
again sorry for the noise, I tought it was already solved in a previous revision. Giovanni Manghi
10:55 AM Bug report #1914 (Closed): Relative paths aren't stored for GRASS layers
Replying to [comment:4 lutra]:
> I have to reopen this after having done the same for #1864.
right, and I close this...
Jürgen Fischer
10:55 AM Bug report #1914 (Closed): Relative paths aren't stored for GRASS layers
Replying to [comment:4 lutra]:
> I have to reopen this after having done the same for #1864.
right, and I close this...
Jürgen Fischer
10:18 AM Bug report #1914 (Feedback): Relative paths aren't stored for GRASS layers
I have to reopen this after having done the same for #1864.
Add a GRASS layer, uncheck "save relative paths" and sav...
Giovanni Manghi
10:18 AM Bug report #1914 (Feedback): Relative paths aren't stored for GRASS layers
I have to reopen this after having done the same for #1864.
Add a GRASS layer, uncheck "save relative paths" and sav...
Giovanni Manghi
11:37 AM Bug report #1864: Saving projects with relative paths
right, I didn't compiled in the last days and I tought it was already solved. Thanks. Giovanni Manghi
10:52 AM Bug report #1864 (Closed): Saving projects with relative paths
Replying to [comment:2 lutra]:
> Sorry to have to reopen this ticket, but saving with relative paths seems not work a...
Jürgen Fischer
10:52 AM Bug report #1864 (Closed): Saving projects with relative paths
Replying to [comment:2 lutra]:
> Sorry to have to reopen this ticket, but saving with relative paths seems not work a...
Jürgen Fischer
10:13 AM Bug report #1864 (Open): Saving projects with relative paths
Giovanni Manghi
10:13 AM Bug report #1864 (Feedback): Saving projects with relative paths
Sorry to have to reopen this ticket, but saving with relative paths seems not work any more, at least under Linux (te... Giovanni Manghi
10:13 AM Bug report #1864 (Feedback): Saving projects with relative paths
Sorry to have to reopen this ticket, but saving with relative paths seems not work any more, at least under Linux (te... Giovanni Manghi
10:24 AM Bug report #1900 (Feedback): Qgis crashes after closing a GRASS mapset and removing a GRASS layer...
I have to reopen this ticket because I'm seeing this behaviour again (under Ubuntu 9.04, both qgis 1.3 from repo and ... Giovanni Manghi
10:24 AM Bug report #1900 (Feedback): Qgis crashes after closing a GRASS mapset and removing a GRASS layer...
I have to reopen this ticket because I'm seeing this behaviour again (under Ubuntu 9.04, both qgis 1.3 from repo and ... Giovanni Manghi

2009-09-28

01:59 AM Bug report #1958 (Closed): [OS X] crash when digitizing on MacOS X Leopard with snapping toleranc...
When adding points on a vector layer with the toggle editing mode, Qgis 1.3 crashes on Mac OS X if snapping is not se... ayepri -
01:36 AM Feature request #1957 (Closed): Use right-click drag for panning and center on mouse pointer on w...
I use Josm for OpenSteetMap editing and I find two mouse behaviour very useful:
* Use the right-click and drag to pa...
Niccolo Rigacci
01:25 AM Bug report #1956 (Closed): Sample data GPX file should be in WGS84
As far I know, GPX files should use the WGS84 spatial reference system, as stated here:
http://www.topografix.com/GPX...
Niccolo Rigacci
12:24 AM Feature request #1936 (Closed): SpatiaLite: support subset string
applied in commit:4b87fbff (SVN r11732). Thanks. Jürgen Fischer
12:24 AM Feature request #1936 (Closed): SpatiaLite: support subset string
applied in commit:4b87fbff (SVN r11732). Thanks. Jürgen Fischer
04:18 PM Bug report #1955 (Closed): QGis segfaults unless I am root
QGis Stable(qgis-1.0.2-1.fc11.i586) on Fedora 11 with Grass 6.3.0-12.fc11.i586 will run as root but segfaults at star... rnolde -
02:39 PM Feature request #1954 (Closed): Save SpatiaLite connections in QGIS projects
added in commit:ed34b139 (SVN r11730) Jürgen Fischer
02:39 PM Feature request #1954 (Closed): Save SpatiaLite connections in QGIS projects
added in commit:ed34b139 (SVN r11730) Jürgen Fischer
09:41 AM Feature request #1954 (Closed): Save SpatiaLite connections in QGIS projects
QGIS works great on opening projects with relative paths to datasources. But this does not work for [[SpatiaLite]] la... Alexander Bruy
10:52 AM Bug report #1911: Postgis Manager errors when "loading from" or "dumping to" shapefiles
Confirmed on Debian unstable with commit:e2beee91 (SVN r11721) Paolo Cavallini

2009-09-27

07:57 AM Bug report #1953 (Closed): Missing copyright in CMake modules
Most of the [source:trunk/qgis/cmake@11650 [[FindXXX]] modules] for CMake include neither copyright notice nor refer ... Mateusz Loskot -
05:58 AM Bug report #1952 (Closed): Impossible to open a Grass dataset
Ok, this is caused by a Grass problem. Sorry for the noise. vince -
05:58 AM Bug report #1952 (Closed): Impossible to open a Grass dataset
Ok, this is caused by a Grass problem. Sorry for the noise. vince -
03:05 AM Bug report #1952: Impossible to open a Grass dataset
Er, no, but where is that supposed to be? Also, can a lock file lock a fresh new dataset? vince -
02:48 AM Bug report #1952: Impossible to open a Grass dataset
hi,
did you checked if you have a lock file?
Giovanni Manghi
02:39 AM Bug report #1952 (Closed): Impossible to open a Grass dataset
There is no way I can open a Grass database, even when created in Qgis. I get the message "Already opened", and nothi... vince -

2009-09-26

12:07 PM Bug report #1938: Deleted features in shapefile reappear with "ERROR" in attribute table.
I cannot replicate the problem under ubuntu 32 bit with qgis trunk. Can you post a sample to be tested by others? Giovanni Manghi
07:45 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
I'm just reclosing this to apply a more meaningful resolution, as the issues were all outside of Qgis. William Kyngesburye
07:45 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
I'm just reclosing this to apply a more meaningful resolution, as the issues were all outside of Qgis. William Kyngesburye
07:43 AM Bug report #1950 (Feedback): Python binary choice on OS X (10.6) / Building bug
William Kyngesburye
02:13 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
Well, I found the trick. There was two problems at stake:
1. The python Framework installed by Macports is incomplet...
vince -
02:13 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
Well, I found the trick. There was two problems at stake:
1. The python Framework installed by Macports is incomplet...
vince -

2009-09-25

01:16 AM Bug report #1945: [Vista] Qgis crashes removing GRASS raster layer from map canvas
confirmed on Vista 32 bit with the lastest dev version available with the osgeo4w installer. Should we file the "Vist... Giovanni Manghi
12:43 AM Bug report #1951 (Closed): Dragging tif/shape layer to QGIS canvas produces an error
fixed Jürgen Fischer
12:43 AM Bug report #1951 (Closed): Dragging tif/shape layer to QGIS canvas produces an error
fixed Jürgen Fischer
08:53 PM Bug report #1951 (Closed): Dragging tif/shape layer to QGIS canvas produces an error
If I drag a tif file from the file manager to open QGIS - it produces an error.
http://gis-lab.info/images/screensho...
Maxim Dubinin
10:31 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Replying to [comment:13 kyngchaos]:... vince -
10:00 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
> On the other hand, similarly to what I did with Grass, I can use install_name_tool to change the reference inside t... William Kyngesburye
09:49 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
BTW, there is maybe another solution to the Python framework problem. With -framework Python, ld accepts also -F {FRA... vince -
09:35 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Replying to [comment:10 kyngchaos]:
> I looked into the cmake python detection, and it's two separate steps - the lib...
vince -
06:59 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
I looked into the cmake python detection, and it's two separate steps - the library and the executable. The executab... William Kyngesburye
06:42 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
I got it, and you were right:... vince -
06:24 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Replying to [comment:7 kyngchaos]:
> But, is it _configured_ and compiled with your python in the PATH? At runtime, ...
vince -
06:11 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
> That's what I did. In my .cshrc, /usr/pkg/bin is leading in the path, so:
But, is it _configured_ and compiled wit...
William Kyngesburye
05:26 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Replying to [comment:3 vince]:
> Ok, I've got that. The LC_ID_DYLIB field in the various Grass libs is wrong (points...
vince -
06:19 AM Bug report #1924 (Closed): QGIS 1.1.0-3 (dmg) and Mac OS X 10.5.8 : a crash a launch - Sept. 11, ...
From offlist, fixed by installing current frameworks. non-issue. William Kyngesburye
06:19 AM Bug report #1924 (Closed): QGIS 1.1.0-3 (dmg) and Mac OS X 10.5.8 : a crash a launch - Sept. 11, ...
From offlist, fixed by installing current frameworks. non-issue. William Kyngesburye

2009-09-24

10:53 PM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Replying to [comment:4 kyngchaos]:
> As I said: add your Python bin folder to the PATH before configuring Qgis.
Tha...
vince -
05:34 PM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
> Okay, so let me put it another way: I have two Python frameworks. One is the Apple default, the other is the new 2.... William Kyngesburye
01:29 PM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
> > Otherwise, I don't get the Grass plugin, but maybe it's because I lack gdal-grass.
> Qgis uses the GRASS librari...
vince -
12:40 PM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
Thanks for that quick answer.
Replying to [comment:1 kyngchaos]:
> Works fine in the Xcode project build. locale_ch...
vince -
11:35 AM Bug report #1950: Python binary choice on OS X (10.6) / Building bug
> First, the build fails in spatialite.c. It appears that OS X 10.6, or my configuration, does not like the call to "... William Kyngesburye
10:32 AM Bug report #1950 (Closed): Python binary choice on OS X (10.6) / Building bug
As usual, and after a summer break, I'm back on porting Qgis to Macports. I selected the new release 1.3.0.
First, t...
vince -
04:14 PM Feature request #1949: Ability to select features by polygon
Thanks for the help, I didn't see that option. However that option also uses intersects to select the features. Plus ... Jeremy Palmer
04:02 PM Feature request #1949: Ability to select features by polygon
Hi,
did you tested the "select by location" tool in the "tools -> research tools" menu?
Giovanni Manghi
04:33 AM Feature request #1949 (Feedback): Ability to select features by polygon
I tried the select plus plugin, but it does not have the function to select features that lie fully within a polygon.... Jeremy Palmer
04:33 AM Feature request #1949 (Feedback): Ability to select features by polygon
I tried the select plus plugin, but it does not have the function to select features that lie fully within a polygon.... Jeremy Palmer
11:11 AM Bug report #1176: Transverse mercator south orientated projections not supported
Replying to [comment:10 halfhaggis]:
> I'm not sure what the right approach to fixing this in qgis is, but using the ...
garyrsa -
08:41 AM Bug report #1945: [Vista] Qgis crashes removing GRASS raster layer from map canvas
Hi pcav,
with 1.4.0 (dev) it works fine on XP now, thanks.
On Vista32 and Vista64 it still crashes.
juanelz -

2009-09-23

01:51 AM Feature request #1948: Ability to deselect features
Oh thanks for the plugin hint. But yes very strange that these features are not in core, or at least bundled with the... Jeremy Palmer
11:02 PM Feature request #1948: Ability to deselect features
Maybe it would be better to have the [[PlugIn]] Functions in the QGIS Core?
I think lots of users don't know much abo...
bjpfei -
10:33 PM Feature request #1948 (Closed): Ability to deselect features
use the "select plus" plugin Giovanni Manghi
10:33 PM Feature request #1948 (Closed): Ability to deselect features
use the "select plus" plugin Giovanni Manghi
09:55 PM Feature request #1948 (Closed): Ability to deselect features
Having the ability to deselect all selected features would be nice. Jeremy Palmer
10:38 PM Feature request #1949 (Closed): Ability to select features by polygon
the "select by polygon" feature already exist. Giovanni Manghi
10:38 PM Feature request #1949 (Closed): Ability to select features by polygon
the "select by polygon" feature already exist. Giovanni Manghi
09:58 PM Feature request #1949 (Closed): Ability to select features by polygon
The ability to select vector features that are "fully" contained within a user defined polygon. Jeremy Palmer
09:52 PM Feature request #1947 (Closed): Ability to create vector scratch layer for editing purposes
I would like the ability to create a vector scratch layer for storing temporary features that are in the process of b... Jeremy Palmer
09:26 PM Feature request #1946 (Closed): Numerical vertex edit not available in undo/redo stack
When performing a numerical vertex edit on a shape polygon the action does not get registered in the undo/redo stack.... Jeremy Palmer
08:33 AM Bug report #1945: [Vista] Qgis crashes removing GRASS raster layer from map canvas
Please test with a very recent version (dev): this should have been fixed Paolo Cavallini
07:51 AM Bug report #1935 (Closed): Crash when setting edit widget in layer properties dialogue/attribute ...
Replying to [comment:2 neumann]:
> Further investigation shows that it has to do with the Postgis provider and the_ge...
Jürgen Fischer
07:51 AM Bug report #1935 (Closed): Crash when setting edit widget in layer properties dialogue/attribute ...
Replying to [comment:2 neumann]:
> Further investigation shows that it has to do with the Postgis provider and the_ge...
Jürgen Fischer
07:16 AM Bug report #1935: Crash when setting edit widget in layer properties dialogue/attribute tab to im...
Further investigation shows that it has to do with the Postgis provider and the_geom column. Attributes/columns befor... Andreas Neumann

2009-09-22

01:14 AM Bug report #1945 (Closed): [Vista] Qgis crashes removing GRASS raster layer from map canvas
I installed QGIS Mimas 1.3.0 (OSGeo4W setup, advanced installation with qgis-grass-plugin 1.0.2-2 and grass 6.4.0svn3... juanelz -
04:27 PM Bug report #1933 (Closed): Fix PostGIS dataprovider to check for unique data with SQL where clause
Replying to [comment:3 jpalmer]:
> How about modifying the [[QgsPostgresProvider]]::setSubsetString method to recheck...
Jürgen Fischer
04:27 PM Bug report #1933 (Closed): Fix PostGIS dataprovider to check for unique data with SQL where clause
Replying to [comment:3 jpalmer]:
> How about modifying the [[QgsPostgresProvider]]::setSubsetString method to recheck...
Jürgen Fischer
03:03 PM Bug report #1933 (Feedback): Fix PostGIS dataprovider to check for unique data with SQL where clause
The case I was wanting to implement already involves a view. It would be useful to use the where cause to show differ... Jeremy Palmer
03:03 PM Bug report #1933 (Feedback): Fix PostGIS dataprovider to check for unique data with SQL where clause
The case I was wanting to implement already involves a view. It would be useful to use the where cause to show differ... Jeremy Palmer
10:33 AM Bug report #1933: Fix PostGIS dataprovider to check for unique data with SQL where clause
s/to/so/ Jürgen Fischer
10:33 AM Bug report #1933 (Closed): Fix PostGIS dataprovider to check for unique data with SQL where clause
the where clause can be changed later, to the id needs to be unique even without the where clause. An alternative wo... Jürgen Fischer
10:33 AM Bug report #1933 (Closed): Fix PostGIS dataprovider to check for unique data with SQL where clause
the where clause can be changed later, to the id needs to be unique even without the where clause. An alternative wo... Jürgen Fischer
02:06 PM Bug report #1944 (Closed): Cannot upload more than one changed node with OSM provider
After having downloaded a small area of [[OpenStreetMap]] data (about 100 features), making one change (say a polygon... morb -
08:07 AM Bug report #1931 (Closed): file extension missing when saving an image from map composer
Fixed in Marco Hugentobler
08:07 AM Bug report #1931 (Closed): file extension missing when saving an image from map composer
Fixed in Marco Hugentobler
06:49 AM Feature request #1943: ftools/buffer produce result shape with wrong crs parameters
This is weird.
I'm using qgis 1.3 and 1.4 trunk under Ubuntu 9.04
I apparently see no problems (with or without OTF...
Giovanni Manghi
05:50 AM Feature request #1943: ftools/buffer produce result shape with wrong crs parameters
Replying to [comment:1 lutra]:
> Hi,
>
> what version of qgis are you using?
>
> Here on 1.3 seems to have no probl...
cmoe -
05:46 AM Feature request #1943: ftools/buffer produce result shape with wrong crs parameters
Hi,
what version of qgis are you using?
Here on 1.3 seems to have no problems.
Giovanni Manghi
04:56 AM Feature request #1943 (Closed): ftools/buffer produce result shape with wrong crs parameters
When buffering a shapefile that has epsg 21781 (CH1903) with ftools buffer, the resulting shapefile is lacking the to... cmoe -

2009-09-21

05:14 PM Bug report #1942 (Closed): Allow more decimal/integer places in the labels font size selector
In order to create labels on a feature in geographic CRS, you must have a font size >= 0.01 degrees (which is about 8... cgsbob -
12:53 PM Bug report #1941 (Closed): save as shapefile leads to disordered attributes (PostGIS)
Replying to [comment:3 cmoe]:
> The layers that I tested, have the geometry column on second place, maybe there is so...
Jürgen Fischer
12:53 PM Bug report #1941 (Closed): save as shapefile leads to disordered attributes (PostGIS)
Replying to [comment:3 cmoe]:
> The layers that I tested, have the geometry column on second place, maybe there is so...
Jürgen Fischer
10:08 AM Bug report #1941: save as shapefile leads to disordered attributes (PostGIS)
Replying to [comment:2 jef]:
> Is it just a different order of attributes or do fieldnames and content get mixed up?
...
cmoe -
09:48 AM Bug report #1941: save as shapefile leads to disordered attributes (PostGIS)
Is it just a different order of attributes or do fieldnames and content get mixed up? Jürgen Fischer
07:21 AM Bug report #1941 (Closed): save as shapefile leads to disordered attributes (PostGIS)
1. load a postgis layer
2. save the loaded layer as shapefile
3. open attribute table

=> the resultant attribut...
Horst Düster
08:00 AM Bug report #1937 (Closed): SpatiaLite provider broken
Apparently fixed in Paolo Cavallini
08:00 AM Bug report #1937 (Closed): SpatiaLite provider broken
Apparently fixed in Paolo Cavallini
04:20 AM Bug report #1574: Displaying ECW raster images is very slow
confirmed, 1.3.0: now it's MUCH faster! luca76 -

2009-09-20

11:29 PM Bug report #1940 (Closed): OpenStreetMap plugin - getMainWindow
... Jürgen Fischer
11:29 PM Bug report #1940 (Closed): OpenStreetMap plugin - getMainWindow
... Jürgen Fischer
10:12 PM Bug report #1940 (Closed): OpenStreetMap plugin - getMainWindow
I would like to test the [[OpenStreetMap]] plugin with QGis 1.3.0 (11643:11644) . It occurs the following python erro... enzopolo polo
04:32 PM Bug report #1916: (windows) : "Access violation - No RTTI Data!"
Replying to "lutra":/issues/show/1916:
> This is the message that appears under windows (Vista, Xp) when clicking (ev...
Jürgen Fischer
04:13 PM Bug report #1916 (Closed): (windows) : "Access violation - No RTTI Data!"
Replying to [comment:2 lutra]:
> Replying to [comment:1 jef]:
> > Just left clicking doesn't do it here.
>
> Here to...
Jürgen Fischer
04:13 PM Bug report #1916 (Closed): (windows) : "Access violation - No RTTI Data!"
Replying to [comment:2 lutra]:
> Replying to [comment:1 jef]:
> > Just left clicking doesn't do it here.
>
> Here to...
Jürgen Fischer
04:27 PM Bug report #1934 (Closed): Unable to remove shapefile field in Attribute table
QGIS queries the provider, if I can delete attributes. Depending on it's response the buttons are enabled or disable... Jürgen Fischer
04:27 PM Bug report #1934 (Closed): Unable to remove shapefile field in Attribute table
QGIS queries the provider, if I can delete attributes. Depending on it's response the buttons are enabled or disable... Jürgen Fischer
02:29 PM Feature request #1939 (Closed): Use ${CMAKE_DL_LIBS} instead of dl for library dependencies
applied in commit:0e4c5229 (SVN r11693). Thanks. Jürgen Fischer
02:29 PM Feature request #1939 (Closed): Use ${CMAKE_DL_LIBS} instead of dl for library dependencies
applied in commit:0e4c5229 (SVN r11693). Thanks. Jürgen Fischer
02:18 PM Feature request #1939 (Closed): Use ${CMAKE_DL_LIBS} instead of dl for library dependencies
All platforms do not require linking against libdl; [[NetBSD]] is one example. Therefore, it is incorrect to hardcod... brook -
10:18 AM Bug report #1938: Deleted features in shapefile reappear with "ERROR" in attribute table.
I should add that when I try to deleted the records that have "ERROR", qgis becomes unresponsive. CTRL-C does not wo... cgsbob -
10:07 AM Bug report #1938 (Closed): Deleted features in shapefile reappear with "ERROR" in attribute table.
I am using r11960 on Ubuntu amd64.
I selected several features in the "Open Attribute Table" window and clicked on...
cgsbob -

2009-09-18

10:08 AM Bug report #1937: SpatiaLite provider broken
Internal [[SpatiaLite]], yes. Patch underway (thanks Alessandro Furieri!). Paolo Cavallini
09:47 AM Bug report #1937: SpatiaLite provider broken
Replying to "pcav":/issues/show/1937:
> A [[SpatiaLite]] db cannot be opened - when opening it throws an error.
Work...
Jürgen Fischer
09:41 AM Bug report #1937 (Closed): SpatiaLite provider broken
A [[SpatiaLite]] db cannot be opened - when opening it throws an error. Paolo Cavallini
07:30 AM Feature request #1936 (Closed): SpatiaLite: support subset string
This patch adds support for subset strings (SQL where clause) in [[SpatiaLite]] layers to limit the dataset.... Mathias Walker

2009-09-17

09:56 AM Bug report #1929: transparency of 0 value do not apply to GDAL virtual rasters (vrt)
An interesting note from Giovanni Pasini:
With a single band raster map (eg. topographical black/white map) if there...
Paolo Cavallini
06:40 AM Bug report #1934: Unable to remove shapefile field in Attribute table
Seems that this problem is OGR-related. OGR can't delete fields Alexander Bruy
03:54 AM Bug report #1934: Unable to remove shapefile field in Attribute table
Confirmed on Windows XP Pro SP3: I can create a new field but can't delete any existing field - Delete button is disa... Alexander Bruy
02:53 AM Bug report #1935 (Closed): Crash when setting edit widget in layer properties dialogue/attribute ...
If one opens the layer properties dialogue --> Attribute Tab --> Edit Widget --> Separate Dialogue --> choose "immuta... Andreas Neumann

2009-09-16

11:53 PM Bug report #1934 (Closed): Unable to remove shapefile field in Attribute table
I compiled latest SVN trunk on Ubuntu amd64.
Steps to reproduce:
1) open vector layer
2) open layer properties
3) g...
luca76 -
05:21 PM Bug report #1933 (Closed): Fix PostGIS dataprovider to check for unique data with SQL where clause
The method [[QgsPostgresProvider]]::uniqueData within qgspostgresprovider.cpp should be updated to use the SQL where ... Jeremy Palmer
10:38 AM Bug report #1932 (Closed): file extension missing when saving a mapfile from mapserver export plu...
looks an easy fix Paolo Cavallini
10:34 AM Bug report #1931 (Closed): file extension missing when saving an image from map composer
if you compose a map in the map composer, the file produced misses a png or jpg etc. extension. Looks an easy fix Paolo Cavallini
08:40 AM Bug report #1904: GRASS plugin crashes QGIS trying to open location from folder with cyrillics
ah, and btw I'm using 11659 Maxim Dubinin
08:38 AM Bug report #1904: GRASS plugin crashes QGIS trying to open location from folder with cyrillics
sorry, it is a mess with those [BR]s, still don't understand why simple <enter> doesn't work as a new line in trac Maxim Dubinin
08:36 AM Bug report #1904: GRASS plugin crashes QGIS trying to open location from folder with cyrillics
Now it doesn't crash, but if you choose such location
http://gis-lab.info/images/screenshots/20090916--13kb.jpg
it ...
Maxim Dubinin
07:04 AM Bug report #1929: transparency of 0 value do not apply to GDAL virtual rasters (vrt)
Replying to [comment:2 pcav]:
> See the attached image: I set up 100% transparency on 0 value, but the white collars ...
ersts -
03:51 AM Bug report #1929: transparency of 0 value do not apply to GDAL virtual rasters (vrt)
Hi,
I tested also a different tiff/vrt on ubuntu 9.04 with qgis 1.3 installed from the ubuntugis repositories. Trans...
Giovanni Manghi
04:19 AM Bug report #1926: QGIS Daphnis doesn't run
it works fine here with sp3, but I install only trough osego4w, not standalone. Giovanni Manghi

2009-09-15

12:19 AM Bug report #1904: GRASS plugin crashes QGIS trying to open location from folder with cyrillics
Please chack again after commit:43408110 (SVN r11561), which might fix it Paolo Cavallini
11:12 PM Bug report #1929: transparency of 0 value do not apply to GDAL virtual rasters (vrt)
See the attached image: I set up 100% transparency on 0 value, but the white collars are still shown.
Debian, QGIS co...
Paolo Cavallini
01:18 PM Bug report #1929 (In Progress): transparency of 0 value do not apply to GDAL virtual rasters (vrt)
Paolo,
I just fired up your vrt dataset on a linux box (Ubuntu 9.04 - stock GDAL) running QGIS trunk .
In the col...
ersts -
03:19 AM Bug report #1929 (Closed): transparency of 0 value do not apply to GDAL virtual rasters (vrt)
If I load a virtual raster (BW, TIFF) and I apply full transparency to value 0 (to remove collars),
the areas=0 remai...
Paolo Cavallini
08:29 PM Bug report #1926: QGIS Daphnis doesn't run
I just installed Daphnis in Win XP2 and it is running perfectly. Some one knows if Daphnis doesn't run in Win XP SP3 carfog81 -
04:36 AM Bug report #1930 (Closed): OSM layer has missing road

The OSM plugin seems to have missed a road in Lancaster. It's a roundabout. I can't get home if it's not there :)
...
barryrowlingson -

2009-09-14

05:09 AM Bug report #1928 (Closed): Custom CRS def'n fails if name contains an apostrophe
Hi,
Using 1.2.0 I am trying to define a custom CRS. In this case it is [[OpenStreetMap]] data which uses the infamou...
hamish -

2009-09-12

07:56 AM Bug report #1926: QGIS Daphnis doesn't run
Replying to [comment:3 carfog81]:
> Replying to [comment:1 lutra]:
> > This you used the standalone installer or the ...
carfog81 -
07:49 AM Bug report #1926: QGIS Daphnis doesn't run
Replying to [comment:1 lutra]:
> This you used the standalone installer or the osgeo4w one? Did you had any previous ...
carfog81 -

2009-09-11

01:16 AM Bug report #1926 (Closed): QGIS Daphnis doesn't run
Replying to "carfog81":/issues/show/1926:
> (Could not start the application because the configuration is incorrect. ...
Jürgen Fischer
01:16 AM Bug report #1926 (Closed): QGIS Daphnis doesn't run
Replying to "carfog81":/issues/show/1926:
> (Could not start the application because the configuration is incorrect. ...
Jürgen Fischer
12:56 AM Bug report #1926: QGIS Daphnis doesn't run
This you used the standalone installer or the osgeo4w one? Did you had any previous version already installed? Giovanni Manghi
07:19 PM Bug report #1926 (Closed): QGIS Daphnis doesn't run
After install QGIS Daphnis on Win XP SP3 in Spanish, it doesn't run, it shows the follow error:
"C:\\Archivos de p...
carfog81 -
08:31 PM Feature request #1927 (Closed): Some possible improvements about row selection on attribute table
I think the row selection on attribute table can be improved in some ways:
1. Dragging the vertical header should se...
gcarrillo -
11:41 AM Feature request #1925 (Closed): GDAL raster import does not see *.dt1 or *.dt2 DTED files
GDAL seems to support DTED files with DT1 & DT2 extension but the QGIS file extension selection filter only shows fil... DRNewcomb -
07:03 AM Bug report #1924: QGIS 1.1.0-3 (dmg) and Mac OS X 10.5.8 : a crash a launch - Sept. 11, 2009
First, make sure you installed the correct Qgis for your system - Leopard.
There was possibly a problem in the SQLit...
William Kyngesburye
06:28 AM Bug report #1924 (Closed): QGIS 1.1.0-3 (dmg) and Mac OS X 10.5.8 : a crash a launch - Sept. 11, ...
Dear Sir :
Please find enclosed a PDF file concerning my issue to alunch QGIS in the1.1.0-3 version.
SQLite3 not fo...
Laurennt Delphin -

2009-09-10

12:49 AM Bug report #1923 (Closed): Missing Print Composer toolbar
duplicate of #1668 Giovanni Manghi
12:49 AM Bug report #1923 (Closed): Missing Print Composer toolbar
duplicate of #1668 Giovanni Manghi
10:48 PM Bug report #1923 (Closed): Missing Print Composer toolbar
I have a user who did a right click on the Print Composer toolbar and then clicked on the checkbox (which has no desc... cgsbob -

2009-09-08

01:26 AM Feature request #1824 (Feedback): Make the Ctrl++ Ctrl+- shortcuts to zoom, not just change the tool
I'm re-opening this because
I find the current behavior (just changing the
cursor icon to + or - but not actually doi...
alobo -
01:26 AM Feature request #1824 (Feedback): Make the Ctrl++ Ctrl+- shortcuts to zoom, not just change the tool
I'm re-opening this because
I find the current behavior (just changing the
cursor icon to + or - but not actually doi...
alobo -
01:15 AM Feature request #782: color ramps for raster layers
Please note the important point of having a colorbar
indicating the meaning of the colors. Not sure if this sugggesti...
alobo -
03:29 PM Bug report #1922: Vertices too large in editing mode
Jef: perfect! Marker size 3-5 looks very good. Without asking too much, could it be backported to the latest stable b... Markus Neteler
02:26 PM Bug report #1922 (Closed): Vertices too large in editing mode
fixed in commit:0a083f59 (SVN r11600) Jürgen Fischer
02:26 PM Bug report #1922 (Closed): Vertices too large in editing mode
fixed in commit:0a083f59 (SVN r11600) Jürgen Fischer
11:53 AM Bug report #1922: Vertices too large in editing mode
Amen. I asked too a similar thing. See #1768 Giovanni Manghi
11:48 AM Bug report #1922 (Closed): Vertices too large in editing mode
The vertex symbols are drawn too large in editing mode which renders it difficult/impossible to realize if a vector o... Markus Neteler
04:05 AM Bug report #1816: GRASS color tables not applied correctly
See also the thread:
http://lists.osgeo.org/pipermail/grass-user/2009-September/052171.html
Paolo Cavallini
03:03 AM Bug report #963: The project Save? dialog does not appear when expected.
I can confirm the defect: if you add a layer to an existing project, you are not asked to save it when closing. Paolo Cavallini

2009-09-07

12:53 AM Bug report #1761 (Closed): Shapefiles: in "attributes -> add attribute -> type string" the precis...
Seems to have been solved in 1.2, thanks. Giovanni Manghi
12:53 AM Bug report #1761 (Closed): Shapefiles: in "attributes -> add attribute -> type string" the precis...
Seems to have been solved in 1.2, thanks. Giovanni Manghi
 

Also available in: Atom