Activity
From 2009-03-02 to 2009-03-31
2009-03-31
-
06:59 PM Bug report #1608 (Closed): Segmentation fault Fedora Core 10 rpm qgis-1.0.1-1.fc10.i386 exit code...
- Hi,
I'm getting a Segmentation fault before I see anything happen, starting from the command line.
I get exit code... -
06:04 PM Feature request #1603: WMS Basic Authentication
- That shouldn't be too hard to add, there is already a setUser() method in the QHttp class that could be used to pass ...
-
12:33 PM Bug report #1605 (Closed): QgsGeometry().fromPolygon([[]]) crashes Qgis
- Fixed in (trunk) and (1.0)
Martin
-
- Fixed in (trunk) and (1.0)
Martin
-
07:11 AM Bug report #1605 (Closed): QgsGeometry().fromPolygon([[]]) crashes Qgis
- I can make a geometry like this:
>>> pol = [ [[QgsPoint]](0,0),QgsPoint(0,1),QgsPoint(1,1)]
>>> [[QgsGeometry]].from... -
10:47 AM Bug report #1607 (Closed): v.in.ogr.qgis does not recognize loaded point vectors
- Lines and polygons are seen correctly by the module once loaded, but points are not
-
- If I delete a geographical object, and as a consequence also its record on the table, then I try to ask to delete the...
-
05:57 AM Bug report #1604 (Closed): Projection recognition fails when a .qml file exists
- I have two shape files showing graticules, both projected in EPSG:4326 and both shapefiles provide a .prj file with t...
2009-03-30
-
09:08 PM Feature request #1603 (Closed): WMS Basic Authentication
- Add basic HTTP authentication to the WMS provider to allow adding password protected services.
-
10:44 AM Bug report #1269 (Closed): DXF converter creates a corrupted Shapefile
- FWIW the DXF converter output based on the attached DXF doesn'r crash QGIS anymore, thus closing the ticket.
-
- FWIW the DXF converter output based on the attached DXF doesn'r crash QGIS anymore, thus closing the ticket.
2009-03-29
-
12:09 AM Bug report #1588: invoking ZoomToSelected() on a single point feature puts map at scale 2:1
- Replying to [comment:1 pcav]:
> It is not clear which the minimum zoom level would be, but I agree that 2:1 is zoomin... -
09:18 PM Feature request #1602 (Closed): Superfluous entries in the Plugin menu
- Every plugin in QGIS currently resides in its own submenu under "Plugins". This is a usability problem, which might b...
-
- Tested, and apparently there are two areas in the file: to one in the north is ok (and imported well); the one in the...
-
- Closing the ticket as it seems fixed now. Please re-open if still something's wrong.
-
- Closing the ticket as it seems fixed now. Please re-open if still something's wrong.
-
- Replying to "j03lar50n":/issues/show/1554:
> Shapefile data with proper projection attribution (EPSG: 2229, NAD83 / C... -
03:35 AM Bug report #1576: wms: no way to set width and height, but no error message when beyond max
- Replying to [comment:3 mhugent]:
> > 1) No way to set max values other then by resizing window.
>
> the min-max pixe... -
03:17 AM Bug report #1576: wms: no way to set width and height, but no error message when beyond max
- > 1) No way to set max values other then by resizing window.
the min-max pixel values are a property of the server, ... -
- For an example polygon from http://www.countyofsb.org/itd/gis/default.aspx?id=2802:...
-
- Is there a public server instance available to test? It might be a problem with the crs format delivered by the server.
2009-03-28
-
08:19 PM Bug report #1203: QGIS segfaults when an Action with capture output has an invalid path to execut...
- I don't see the other bug that reports the capture output bug (so I modified the summary), but this report is still v...
-
- I'm still certain that this issue (in regards to not working on Windows) was fixed for version 1.x. You might have th...
-
07:10 AM Bug report #1315 (Feedback): "Actions" in qgis do not work on MS windows
- I got this trouble using 1.0.1; clicking an action make Qgis crash.
Using windows vista 64bit
Thanks
Luca -
- I got this trouble using 1.0.1; clicking an action make Qgis crash.
Using windows vista 64bit
Thanks
Luca -
- Correction: the file does show up (you just have to zoom a lot). Zooming does not crash for me. Please reopen it if n...
-
- Correction: the file does show up (you just have to zoom a lot). Zooming does not crash for me. Please reopen it if n...
-
- Hi msieczka. It is unclear if the issue is still valid: the sample data are missing one of the necessary files (.dbf)...
-
- New table manager does not have this function, so the ticket seems not to apply anymore; please reopen it if appropriate
-
- New table manager does not have this function, so the ticket seems not to apply anymore; please reopen it if appropriate
-
- Apparently a duplicate of #1417
-
- See also #1545 (now closed as it's a duplicate)
-
- I assume (no such large data at hand) it does solve it; please test and reopen it if appropriate
-
- I assume (no such large data at hand) it does solve it; please test and reopen it if appropriate
-
03:22 PM Bug report #1017: QGIS crashes X session (Ubuntu Gutsy) if too many polygons are loaded
- I have not tested this lately. It is _not_ a QGIS bug. It is a bug in the Xserver. I have generated a backtrace and f...
-
- See also #1430 (may be a duplicate)
-
- Is this related to #1537 ? Can be closed as well?
-
- See also #377 and #1079, all probably related
-
- This is also related to #1079
-
- Still a serious bug: see also #377
-
- See also #1017 (may be a duplicate)
-
03:00 PM Feature request #1354 (Closed): Ambiguous GUI label "Capture" for map editing tools
- Closing this. Changing the english version will cause unneeded disruption to existing documentation and tutorials whe...
-
- Closing this. Changing the english version will cause unneeded disruption to existing documentation and tutorials whe...
-
- Even if the display is wrong, data are not corrupted, and no crash happens AFAIK
-
- It is indeed a duplicate of #1475; please check that ticket for additional info
-
- Duplicate of #1371
-
- Duplicate of #1371
-
- It is not clear which the minimum zoom level would be, but I agree that 2:1 is zooming really too close: can this be ...
-
- eg in https://trac.osgeo.org/qgis/browser/trunk/qgis/src/plugins/grass/themes I see only png, not svg. I couldn't fin...
-
- db.connect is a simplified version of db.connect.schema, not to bother users with an extra option, so it can stay as ...
-
04:29 AM Bug report #1601 (Closed): qgis crashes when "zooming out"
- I have a project with reprojection active. If I "zoom out" enough I can make qgis crash. The bug is reproducible on m...
-
04:21 AM Bug report #1598: New Attribute Table Suppresses PostGIS Table Column
- Replying to [comment:2 jef]:
> Replying to [comment:1 jef]:
> > should be fixed in .
>
> commit:8688c0e6 (SVN r10430... -
- I am trying to georeference a scanned map in TIFF format with linear method, but the Georeferencer plugin fails to ge...
-
- A test WMS server is at: http://www.lucamorandini.it/geoserver/wms , while
the WFS one is at:http://www.lucamorandini...
2009-03-27
-
10:44 AM Bug report #1598: New Attribute Table Suppresses PostGIS Table Column
- Replying to [comment:1 jef]:
> should be fixed in .
commit:8688c0e6 (SVN r10430) that is. -
- should be fixed in .
-
- should be fixed in .
-
- After open a [[PostGIS]] layer attribute table not all columns are displayed. Always the last defined column from tab...
-
04:53 AM Bug report #1582: osgeo4w qgis-grass plugin crashes on Windows Vista
- Sorry, I meant dbf.exe, obviously :)
-
02:37 AM Bug report #1485: crashes when playing with symbology - GDAL issue
- The dataset was too large to upload. It is the california dataset on http://www.plantsciences.ucdavis.edu/plant/qgisl...
-
- I already had the above version of libgdal installed on Ubuntu Intrepid Ibex but downloaded and installed the above v...
-
- I already had the above version of libgdal installed on Ubuntu Intrepid Ibex but downloaded and installed the above v...
2009-03-26
-
06:54 PM Bug report #1542 (Closed): opening .shp file created by pgsql2shp crashes QGIS and entire system
-
- My projects use multiple geometry columns for each table, and I've noticed the geometry column having different sorti...
-
- My projects use multiple geometry columns for each table, and I've noticed the geometry column having different sorti...
-
02:24 PM Bug report #1537 (Closed): Units unknown in GRASS mapset creation for EPSG 26745
-
- Presently, feature data are not sorted by QGIS. Also, databases do not return data in any particular order, unless ex...
2009-03-25
-
12:54 PM Bug report #1596 (Closed): Action tab in vector layer properties does not warn you, if action nam...
- If you are adding some action to the vector file and do not set the action name (from whatever reason), the action is...
-
- While loading large vector (postgis) data, it is possible to switch the layers off, while the data are beeing rendere...
-
04:52 AM Bug report #1594 (Closed): QGIS does not start due to GRASS libraries
- If You compile anything against GRASS 6.4 or newer it will NOT run with pre-6.4 GRASS libs. Remove pre-6.4 GRASS from...
-
- If You compile anything against GRASS 6.4 or newer it will NOT run with pre-6.4 GRASS libs. Remove pre-6.4 GRASS from...
-
- hi,
while starting QGIS, I get:... -
02:32 AM Bug report #1310 (Feedback): Saving/Loading Unicode data in shapefiles
- Replying to [comment:5 zachariahyoder]:
> I have repeated the steps described by cdavilam and it works for me in both... -
- Replying to [comment:5 zachariahyoder]:
> I have repeated the steps described by cdavilam and it works for me in both...
2009-03-24
-
12:25 AM Feature request #1593: Oracle GeoRaster Plugin
- Please go ahead and built on top my code. It is currently unmaintained so I am happy if it will be reused and helpful...
-
08:29 PM Feature request #1593 (Closed): Oracle GeoRaster Plugin
- This plugin depends only on GDAL to compile.
It is basically a UI similar to the [[PostGIS]] UI. It manages the Ora... -
06:34 PM Feature request #1591: Coordinate capture plugin: lat/long reversed?
- Is the same order in the status bar?
-
06:02 PM Feature request #1591 (Closed): Coordinate capture plugin: lat/long reversed?
- Latitude and longitude seem to be listed in reverse in the CRS field of the plugin.
MA is at 42,-71 not -71,42 as the... -
- Are you sure the layer CRS is properly declared and reprojection on the fly is enabled? Why not to set the project CR...
-
- What does the projection capture selection button do?
The only effect it seems to have is:
a) if set a geographic co... -
- It's because QGIS doesn't save properly geometry of some docked widgets when QGIS window is maximized. I still can't ...
-
- Would it be possible to make this panel a little denser? There's an awful lot of empty space between rows of fields t...
-
- Seems to work fine now in 1.0.1.
-
- Seems to work fine now in 1.0.1.
-
- Can you be more specific? I've already committed any SVG sources I have. Any other images were done with the GIMP pro...
-
- Most svg images are missing from source code (only derived png are there). Please add them.
-
- Just a note - ir you add an 'r' in front of revision numbers, trac automatically will create a link to the change set...
-
01:47 PM Bug report #1589 (Closed): problem visualizing WMS defined with a EPSG:NONE srs
- Hello all !
We have small problem, with our WMS service and qGis.
We expose some data in WMS, but we have a customi... -
- Hi,
I wrote a python plugin and I use [[ZoomToSelected]]() to zoom to a point feature.
The problem is that QGIS zoo... -
- Note that I have uncommitted changes to the table UI so please hold off making changes until they are committed. I wi...
-
- The implementation itself should be indeed simple, there's just a UI design decision needed - whether to put it direc...
-
- I agree this is an useful improvement, and it appears trivial to fix: can someone deal with it?
-
- Is this still true?
-
- This has been fixed in .
Frank - to explain the inner working of the CRS recognition: given a proj4 string, qgis tri... -
- This has been fixed in .
Frank - to explain the inner working of the CRS recognition: given a proj4 string, qgis tri... -
02:53 AM Bug report #1489: GRASS Plugin: Map name input field not working correctly for modules that take ...
- I have tried:...
-
- Replying to [comment:3 pcav]:
> Also, I do not understand why having both db.connect and db.connect.schema (the secon... -
- The idea is having in the same window both connection parameters and
login credentials. The current situation is quit... -
- WMS and WFS services of Sardinia Region:
WFS service (geoserver)
http://webgis.regione.sardegna.it/geoserver/wfs?
Im... -
- On the basis of a brief discussion about Qgis 1.0.x libraries this is
the current point of view by Debian packagers a... -
- It would be good to make the plugins (mapserver and ftools) available through the standard repo,
so everybody could u... -
- There is a problem in PROJ4: there are several datum for EPSG 3003 (and
others), but in PROJ4 the epsg file does not ... -
- Adding WFS-T support would be an important addition to QGIS
2009-03-23
-
- I forgot an important thing: the crash happens whenever db.exe is invoked
-
- Whenever I try to use the qgis-grass plugin (osgeo4w stack) on Windows Vista, I receive a complete crash of QGis. It ...
-
- fixed in 10403 and 10411
-
- fixed in 10403 and 10411
-
11:20 AM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- I just updated to and can confirm that QGIS-GRASS plugin creates a new mapset with the correct units.
-
08:14 AM Bug report #1581 (Closed): fTools crash
- Fixed in trunk...
Carson -
- Fixed in trunk...
Carson -
- From the shell:
Warning: QMetaObject::connectSlotsByName: No matching signal for on_btnHelp_clicked()
Warning: QPixm... -
- When calculating basic statistics on a field with all 0s, I get a python error (division by 0), and qgis crashes
-
- Is this still true for qgis 1.0.x?
2009-03-22
-
- Idealy, one should, from within QGIS, be able to create a tile index (just a frontend to gdaltindex) and load this in...
-
- In addition, it would be good to apply the same style to all tiles.
-
- In fact, icons do change, but only after restarting qgis, whereas core icons change in real time. It would be good to...
-
11:33 AM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- The text associated with the foot units is not significant, it is just a clue for the user. The proper value is asso...
-
- I'm also attachinbg updated qgis.db and srs.db for convenience.
-
- I have added '--qgis' switch to script http://www.sieczka.org/prog/qgis/qgis_srs.sh so that it's also able to create ...
-
- I think it's a reasonable requirement for packagers to add "depends: python" statement for the package for qgis pytho...
2009-03-21
-
06:54 PM Feature request #1518: python binding does not link with libpython
- well, if it is not directly linked against libpython, then there is no signal that python bindings is using python. i...
-
- Replying to [comment:1 pcav]:
> Is this still true for 1.0.1?
yes. -
- Is this still true for 1.0.1?
-
- Replying to [comment:1 pcav]:
> Distnces in latlong projections do not have much sense.
Distances in latlon is only ... -
- Distnces in latlong projections do not have much sense.
-
10:37 AM Bug report #1470: Build error in 1.0.0 (linguist problem in French translation), Qt 4.5.0 beta1
- Oh I am such a knucklehead. Sorry, forgot to work around it and run cmake again. Here are some more;
qgis_mn.ts
qgis... -
- Unfortunately does not appear to be. But your almost there. Here is the only one giving me trouble;
Updating '/usr/s... -
- Still true?
-
- This bug has now been duplicated (with supplied patch) here: https://trac.osgeo.org/qgis/ticket/1522
-
- This bug has now been duplicated (with supplied patch) here: https://trac.osgeo.org/qgis/ticket/1522
-
- This is fixed (new implementation) in trunk (rev.10338)
This will not be backported due to significant changes to th... -
- This is fixed (new implementation) in trunk (rev.10338)
This will not be backported due to significant changes to th... -
- What QGIS version do you use?
-
- What is the current state of this?
-
- Does recently added Better Table by Martin solve this?
-
- Is this still valid? Many things are changed, please test it again and close it if appropriate.
-
- In absence of a reply, I'm closing it. Please reopen it if appropriate.
-
- In absence of a reply, I'm closing it. Please reopen it if appropriate.
-
- See also #1341
-
- See also #1341
-
- laurent01, could you please add more detail? Many OSX users are using QGIS, apparently without problems. Please test ...
-
- There is now a warning that measuring in latlong CRS gives not-so-reasonable results. This is inherent to the project...
-
- There is now a warning that measuring in latlong CRS gives not-so-reasonable results. This is inherent to the project...
-
- Apparently a duplicate of #1393
-
- Apparently a duplicate of #1393
-
- I tried to reproduce the bug on Debian 64bit, but I cannot. Please test again and let us know the specific conditions...
-
- See also #1575
-
- I do not think this may be called a bug, but a difficulty in programming. Please post your question to the dev list.
... -
- I do not think this may be called a bug, but a difficulty in programming. Please post your question to the dev list.
... -
- jared, could you please post the shp that causes the crash? without it it is very difficult to reproduce the problem,...
-
- Running attached WKT file through "testepsg" returns the same problem ("Foot_US" only recognised in the ESRified part...
-
- Indeed it looks to be OGR problem as Markus suggested. From my tests - the proj4 string for this projection (epsg 267...
-
-
05:32 AM Bug report #1350: WMS connection don't work through proxy
- I think this bug should be closed now. It works fine for me.
Andreas -
- this is now addressed with the proxy exceptions, available in trunk.
-
- this is now addressed with the proxy exceptions, available in trunk.
-
- I confirm this bug is still present on Debian too, as outlined in comment:10.
Very annoying, long lasting (2 years!)... -
- Seems to be implemented now
-
- Seems to be implemented now
-
- seems to work now in current trunk
Thanks! -
- seems to work now in current trunk
Thanks! -
- It would be nice if we could have a status indicator when loading a
qgis-project. Some of my project have 20+ layers ...
2009-03-19
-
09:09 PM Feature request #699: problem when moving quickly a layer trough the legend
- I last saw this in version 0.11, but am unable to test it in version 1.0 under Windows as I don't see an executable I...
-
- This is still a problem. I do not recall this being an issue for me up to, perhaps including, version 1.0.0. With tru...
-
03:23 AM Feature request #1579 (Closed): switching back to the prior view/extend is only possible one step
- IMHO it would be very useful to have the "back to prior zoom"-button switching back to more of the foremer views7exte...
-
02:03 AM Feature request #1578 (Closed): Basic shapes in map composer
- It would be great if developers add ability to draw basic shapes such as polygons circles lines in map composer. If ...
2009-03-17
-
- As images speak more than words, here's a "screencast":http://geog-pc40.ulb.ac.be/qgis/wms_bug.gif of the problem.
A... -
- This is really a GDAL issue, to be soved by packagers, and depending on legal rather than technical issues
-
- This is really a GDAL issue, to be soved by packagers, and depending on legal rather than technical issues
-
- Fixed in #10282
-
- Fixed in #10282
-
05:01 AM Bug report #1350: WMS connection don't work through proxy
- Replying to [comment:6 jef]:
> Replying to [comment:5 jef]:
> > Perhaps it helps when you switch from [[HttpProxy]] t...
2009-03-16
-
10:45 PM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- I can confirm this in OSX as well from an install of all the latest frameworks etc from http://www.kyngchaos.com as o...
-
- I am able to export a composed map to SVG, but the result is unusable.
Quick print's a bit better, but not ideal, so ... -
- Replying to [comment:2 pcav]:
> Please use the GRASS plugin to load GRASS raster
That's not the point. QGIS is (and ... -
- Please use the GRASS plugin to load GRASS raster
-
- Please use the GRASS plugin to load GRASS raster
-
- In the current implementation of the wms client, there is no way to set a max width and height. Trying to access a se...
-
- Presumably solved in the latest versions of the installer. Reopen it if appropriate.
-
- Presumably solved in the latest versions of the installer. Reopen it if appropriate.
-
- Probably invalid with newer versions. Please reopen it if appropriate.
-
- Probably invalid with newer versions. Please reopen it if appropriate.
2009-03-14
-
- fixed in commit:23f865a5 (SVN r10279)
-
12:21 PM Bug report #1567 (Closed): Wrong band order in "Identify Features"
-
- I will let this stay in the trunk for a couple of days before merging into the v1.0 branch.
2009-03-13
-
- The same applies to all dialog buttons (like "Save", etc.) for QGIS 1.1.0. Perhaps an updated qt_ru.ts is required.
-
10:18 PM Bug report #1575 (Closed): QGIS crashes while attempting to change symbology to continous color
I'm running QGIS 1.0.1 under 64-bit Ubuntu 8.10. When doing this, I get the following errors:-
08:19 AM Bug report #1572: new features will not display before spatial index is recreated/QGIS restarted
- same thing happens again today, after a restart, with the same layers. Newly added features will only show up after (...
2009-03-12
-
- Hi,
I have QGIS 1.0.1 for windows installed from OSGEO4W.
If I try to open a simple ECW (67 MB), QGIS is taking too... -
01:58 PM Bug report #1573 (Closed): lines/frames of items remain in map composer after moving or deleting ...
- After moving or removing items in the map composer - using qGIS 1.0.1 under Windows XP - SP3, it seems old frames are...
-
- I noticed a similar thing on Windows couple of versions ago.
-
- I confirm. I observed the same issue several times.
-
- I've imported some shapefile-exports (Geomedia) and added line-features in QGIS. The lines were showing up nicely, un...
-
- Steps to reproduce:
0) in the legend window, create groups and drop different layers to different groups (to keep eve... -
- Replying to [comment:17 pcav]:
> The problem seems still there:
>
> Warning: Object::disconnect: Unexpected null par... -
- Replying to [comment:17 pcav]:
> The problem seems still there:
>
> Warning: Object::disconnect: Unexpected null par...
2009-03-11
-
-
- It is was I expected, a problem comparing doubles. Even thought -1.196483 was in the ascii grid and the color map the...
-
- It is was I expected, a problem comparing doubles. Even thought -1.196483 was in the ascii grid and the color map the...
-
06:25 AM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
- Note that you can avoid the problem by working with the english version:
in the QGIS options, "locale" tab ("paramètr... -
- The problem seems still there:
Warning: Object::disconnect: Unexpected null parameter
Fatal: ASSERT failure in QList... -
- The problem seems still there:
Warning: Object::disconnect: Unexpected null parameter
Fatal: ASSERT failure in QList... -
- When snapping is active, it seems that moving individual vertices immediately after a vertex was added with "add vert...
2009-03-10
-
- Replying to [comment:5 jef]:
> Perhaps it helps when you switch from [[HttpProxy]] to [[HttpCachingProxy]] (but I thi... -
- Replying to [comment:4 marchesinivan]:
> Warning: UNEXPECTED RESPONSE: [HTTP/1.1 502 Proxy Error ( The specified Secu... -
- The button "Close" in all dialogs (like file opening) in 1.1.0 appears untranslated, (when built and started with Qt ...
2009-03-09
-
- Load a vector layer. Make sure the legend element is expanded so you can see the symbolism.
Click on the symbolism s... -
- The list of bands,values on "Identify Features"/"Identify Results" should not use alphabetic sorting.
See what happ... -
01:25 AM Bug report #1566: Fix install paths on 64 bit linux
- You are right, changing the path for windows is probably bogus, replacing patch. Should be ok now.
2009-03-08
-
- Replying to "hanno":/issues/show/1566:
> On 64 bit linux, libraries should go to /usr/lib64, not /usr/lib. Attached p... -
- On 64 bit linux, libraries should go to /usr/lib64, not /usr/lib. Attached patch will fix this.
-
- Ok, so that was the problem. I had previous day's version, and the packages didn't automatically upgrade even when as...
-
- Ok, so that was the problem. I had previous day's version, and the packages didn't automatically upgrade even when as...
2009-03-07
-
02:55 PM Bug report #1565: grass vector attributes are not available in qgis
- I loaded the *spearfish60* mapset, added the *landcover* vector layer, clicked on "Open Attribute Table": I see a thr...
-
01:13 PM Bug report #1565: grass vector attributes are not available in qgis
- I have made a test with both the 1.0 and the 1.0.1 (installed using the official repository) under Ubuntu 8.10 and wi...
-
- Replying to [comment:1 msieczka]:
> What is the output of 'v.info -c' for your GRASS vector map?
v.info -c geologica... -
- What is the output of 'v.info -c' for your GRASS vector map?
2009-03-06
-
- When I try to load a Grass vector data in Qgis, the attributes are not available. Only the cat column.
I'm using Debi...
2009-03-05
-
09:05 PM Feature request #515: Thoroughly use OGR
- Hi Tim:
I added a combo to openvectordialog and removed it from the file selector. This way the encoding can be app... -
- Hi Godofredo
I tested your patch here. The dialog has some layout issues making the upper frame impossible to see he... -
- should be fixed in /
-
- should be fixed in /
-
06:18 AM Bug report #1564 (Closed): Crash when changing edit widgets for vector layer attribute tables
- Go to the vector layer properties, then the attributes tab. Change any of the comboboxes for the edit widgets and the...
-
03:18 AM Feature request #1563 (Closed): Raster: tile indexes
- Load multiple images as one layer. Like in "MapServer":http://mapserver.org/:
[http://mapserver.org/optimization/til...
2009-03-04
-
- I have been working in a patch for open vector layer dialog to improve it and extend it to support database, protoco...
2009-03-03
-
10:00 PM Bug report #1562 (Closed): Unable to Open one or more project layer
- Hi All,
I am loadin a qgs project to my own QGIS application in qt.
it shows an error like unable to open one or more... -
- Replying to [comment:3 neteler]:
> OK, but I am on Version 1.0.x... cannot find it there.
but in 1.0 it's still ther... -
- I'm using debian testing
I have just installed qgis 1.0.1
We have a proxy of this type: 192.168.10.13 - port: 80
I ...
Also available in: Atom