Activity
From 2007-01-25 to 2007-02-23
2007-02-23
-
06:04 PM Bug report #503 (Closed): GUI messages completely illegible
- Reading the messages above you seem to have the issue resolved. I am closing this bug - please reopen if the problem ...
-
- Reading the messages above you seem to have the issue resolved. I am closing this bug - please reopen if the problem ...
-
- This can be done using layer groups. Marco can all of the above requests be catered for by layer groups? Perhaps we n...
-
- I will need to check the NSIS option for this if it exists. I will try to have it resolved for the soon to be release...
-
- Head builds without warnings now - we need to check if this report can be closed now. I reset the milestone to 0.9 si...
-
- There is no further work on 0.7 branch. There is no further work on automake build system as we are moving to cmake i...
-
- There is no further work on 0.7 branch. There is no further work on automake build system as we are moving to cmake i...
-
03:05 PM Bug report #611 (Closed): Allow user to disable snap tolerance warning
- The "Could not snap segment. Have you set the tolerance in Settings > Project Properties > General?" warning is good ...
-
- I have build gdal with pg support for the upcoming release of qgis 0.8.1. I will release a preview of the win build l...
-
- I have build gdal with pg support for the upcoming release of qgis 0.8.1. I will release a preview of the win build l...
-
- I have put all the qt plugins under a plugins/ folder in the install dir. I tested here on my machine and was able to...
-
- I have put all the qt plugins under a plugins/ folder in the install dir. I tested here on my machine and was able to...
2007-02-22
-
09:46 PM Feature request #244: Add Metadata for PostGIS Layer
- Column comments are now visible in the metadata tab as of
-
07:04 AM Bug report #503: GUI messages completely illegible
- Hi all,
I've got the same problem, the "editing of fonts.conf" solution proposed worked pretty well!!!
Thanks a lot...
2007-02-21
-
10:50 PM Bug report #610 (Closed): attribute table with asian letters on a german qgis 0.8-win xp-environment
- hi
on a german win xp-machine (sp2) i've installed with the windows installer (german language selscted) qgis versio... -
- GRASS external layers created with v.external don't work in QGIS. They show up, but can't be added since they lack an...
-
08:47 AM Bug report #608 (Closed): QGIS and Assertion failed
- I have a pc with [[WindowsXP]] + SP2 and all updates. Hardware: Sempron 3100+, Ati Xpress 200M, When I try change Pro...
2007-02-20
-
03:56 PM Bug report #586: Qgis 0.8.0 Crash on opening existing project using PostGis layer
- Extra.
It only occurs if you also view the Metadata Page of a postgis layer properties. You actually dont need to c... -
- I think that the problem is due to the maplayer method publicSource, which removes the password=xxx out of the dataso...
2007-02-19
-
10:26 AM Feature request #607 (Closed): WMS layer uses the Connection's name instead of the one in mapfile
- Hi to all!
Try to add a WMS layer; once added, the name shown in the layer list, is the one used for the WMS connect...
2007-02-18
-
- The "show only matching" selection in the attribute table doesn't seem to do anything and results in unexpected behav...
-
- Hmm. It's actually slower :(
-
07:36 AM Bug report #571: Grass raster will not load or display
- Just downloaded 0.8 to Vista .. GRASS Rasters load and display!
2007-02-17
-
- Building pyramids segfaults. Image size was 8192x4096.
Backtrace:... -
- The summary says it all. Set any band to not set and click Apply or Ok. QGIS crashes.
This also happens in 0.9 and t... -
10:55 AM Bug report #531: Add multiple selection in map legend
- For me, the group still exists. The missing layer does not get added to the group, however, even if you find it.
-
- Need more info to fix this.
-
-
- Added in /. The i18n zealots applaude you!
-
01:43 AM Feature request #603 (Closed): Added tr() wrappers for i18n
- Added tr() wrappers for i18n
-
02:51 AM Bug report #600 (Closed): Renaming layer in legend doesn't stick
- Fixed in commit:2e85c735 (SVN r6616)
-
- Fixed in commit:2e85c735 (SVN r6616)
-
- Fixed in svn head () and 0.8 branch ()
-
- Fixed in svn head () and 0.8 branch ()
2007-02-16
-
- A potential speed-up has been committed to head (commit:2a35478a (SVN r6611)). Please test if you can. If it works, I...
-
- The graduated symbol dialog is pretty much unusable on OS X at screen resolution of 1024x768. The dialog also can't b...
-
02:36 PM Bug report #601 (Closed): Georeferencer plugin incorrectly handles PNG files
- I tried 0.8 on Ubuntu and Windows XP with the same result: when the georeferencer plugin is used with a PNG file, the...
-
- Excellent error report!:-)
Should be fixed in . -
- Excellent error report!:-)
Should be fixed in . -
- If you rename a layer by right-clicking on it and choosing "Rename" it will change its name. If you open the vector l...
-
- The legend label set from the vector layer properties dialog is not retained on subsequent openings of the dialog. Th...
-
05:29 AM Bug report #595: SnapDistance:
- Marco, you got me!
I thought the distance were pixels (as in GRASS)... Setting a larger snapdistance the snapping t... -
- Hi Stephan,
Snapping for adding vertices works for me in 0.8. Are you sure you set the snapping tolerance in map uni... -
- HI Marco, sorry for beeing unprecise. I had problems to add new vertices on my postgis-layer which was not reprojecte...
-
- The double pop-up is removed now.
Could you give a more detailed description of when and how the snapping does not wo... -
01:40 AM Feature request #598 (Closed): Update projection values fo French NTF in srs.db
- Hello,
As discussed "here":http://www.nabble.com/Projection-parameters-for-french-NTF-tf2345054.html, Qgis ship with...
2007-02-15
-
- Hamish,
The 180 degree line is a problem for most gis packages, qgis included.
A work-around that I use a lot is t... -
07:24 PM Bug report #597: lat/lon maps should wrap around 180 longitude
- test data: shapefile of New Zealand and offshore islands; extracted from the NOAA GSHHS dataset. (520k)
http://bam... -
- In that screenshot, the Chatham Islands on the far left should be within the grid (~176W). The grid runs from 160 to ...
-
- Hi,
lat/lon maps which cross 180 longitude don't wrap.
This should at least happen when only one of -180,+180 is in... -
- Now checking allocation result. See .
-
- Now checking allocation result. See .
-
10:10 AM Bug report #514: WMS requested image size out of range error
- Hi, using 0.8.0 Final on Windows, get a similar error with another server:
(Unknown error code from a post-1.3 WMS s... -
- The fact that all features appeared in the same color after removing the query is a bug and should be fixed now (in t...
-
- The fact that all features appeared in the same color after removing the query is a bug and should be fixed now (in t...
-
- GRASS toolbox: The module-name should be prompted somewhere on the
tab, perhaps directly over the first entry-fields ... -
- The snapdistance does not work as expected when moving vertices on postgis-layers.
Furthermore the window with the hi... -
- The Win32-Binary does not contain Postgresql-support for OGR. It would be nice to have this availabel, so that GRASS ...
-
- SPIT: once starting the import of a shapefile the 'cancel'-button
does not work anymore. It would be nice to cover th... -
03:25 AM Bug report #592 (Closed): WMS projection 27591
- I use Mapserver and my map use the projection 27591 (North of France).
I can access the WMS without problem with Ga...
2007-02-14
-
11:31 PM Bug report #522: Major shapefile display error
- I also have a wrong display with one huge object with islands which is always black like in one of the attached files...
2007-02-13
-
- The following link was generated by quantum GIS 0.8.0, running on windows 2000 server
http://wms.jpl.nasa.gov/wms.cg... -
- SVN 6540, QT 4.2.2
As the title reads. See the linked screendumps.
that's how the project looks, and how I'd like i... -
- I have upgraded gdal 1.3.2 with the 1.4.0 version and the measuring tool now works fine. Proj is in version 4.5.0, qg...
2007-02-12
-
- A third party shapefile, loaded into postgis (successfully), causes qgis to crash when viewed.
The layer is 53 polyg... -
- Request for a "zoom to scale" feature. A user can manually specify to which scale factor, e.g. 1:50,000, he wants the...
-
05:13 AM Feature request #587 (Closed): Render Output Image at Arbitrary Resolution
- It would be useful to be able to render an output image file at any arbitrary resolution. The desired resolution woul...
2007-02-11
-
- I think from a user’s point of view it is very annoying having to wait a long period just to load a layer - especiall...
-
- Unfortunately, many parts of qgis require the feature count to be accurate at all times, and if not causes subtle err...
-
05:53 PM Feature request #581 (Closed): POSTGIS Layer feature count methodology
- Currently in the win32 0.8 release (and any release that does not define the POSTGRESQL_THREADS macro) the POSTGIS da...
-
- Crashes on opening an existing project with segmentation error after changing properties on layer in a previous sessi...
-
- Currently in the 0.8 win32 build of QGIS the legend border box and layer name text overlap. The issue seems to go all...
-
- ops a duplicate somehow got created!
-
- ops a duplicate somehow got created!
-
- QGIS has problems with rendering some polygons. To fix some of these drawing issues turning on anti-aliasing seems to...
-
- QGIS has problems with rendering some polygons. To fix some of these drawing issues turning on anti-aliasing seems to...
-
- Currently the POSTGIS data provider use the "extents" function to determine the layers spatial extents. This can take...
-
- This is a follow on from ticket 399. Currently when using the layer property dialog with POSTGIS layers, the user may...
-
- No problem.
-
- No problem.
2007-02-10
-
06:27 PM Bug report #553: Qgis 0.8 (MacOSX) crashes when loading raster file from WMS
- A workaround is to hide the toolbar or just resize it so that the WMS icon is hidden. It is then possble to open a WM...
-
- i gave up & deleted the linux partition - there's no point using software that's this difficult to get up & running; ...
2007-02-09
-
- It *is* a defect.
-
- We need more info, I'm afraid.
-
- Sounds like the wrong Qt runtime libraries got picked up. Not a bug in Qgis, but glad to help! :-)
-
- Sounds like the wrong Qt runtime libraries got picked up. Not a bug in Qgis, but glad to help! :-)
-
- Replying to [comment:4 homann]:
> Hmm...
>
> It crashes while loading plugins/providers/widgets from /usr/lib/qgis/... -
- Excellent! Tim will include this in future win32 builds.
-
- Yessssss !!! it works perfectly well and fast.
Thank you very much.
So the process is:
1) In the directory where qgis...
2007-02-08
-
- Could it be faulty DLL:s?
Download http://www.dependencywalker.com/ and try to run qgis through it. Please include a... -
- Please provide a log. See also #573
-
- forgot to say that I asked for help on IRC: http://logs.qgis.org/slogs/%23qgis.2007-02-06.log around 09:30:49. There ...
-
- Hi, I am on Ubuntu Feisty Fawn (all updates shining and running)
I'm trying to compile QGIS from SVN:6551.
At the e... -
- Hmm...
It crashes while loading plugins/providers/widgets from /usr/lib/qgis/. It loads them in alphabetical order,... -
01:52 AM Bug report #573: upgrade to titan but it won't start as I get a segmentation fault
- I have progressed a little: configure now completes and config log is attached. Make also completes withour error an...
-
- Compiling 0.8 branch with proj 4.4.9 and gdal 1.3.1, the proj4 string was not recognized as valid.
Compiling 0.8 bra... -
- Compiling 0.8 branch with proj 4.4.9 and gdal 1.3.1, the proj4 string was not recognized as valid.
Compiling 0.8 bra...
2007-02-07
-
- I've added .zip file containing the DLL. Download, and unzip with [[WinZip]] as per instructions above. See if that h...
-
- Closing it means that we have a fix for it. Please, we have many more bugs without any fix at all to worry about.
-
-
- Replying to [comment:12 homann]:
> It's #574, that's right. I don't think it will ge backported, projection implement... -
- Replying to [comment:12 homann]:
> It's #574, that's right. I don't think it will ge backported, projection implement... -
- It's #574, that's right. I don't think it will ge backported, projection implementation has changed for 0.9, and we d...
-
- It's #574, that's right. I don't think it will ge backported, projection implementation has changed for 0.9, and we d...
-
06:51 AM Bug report #578 (Closed): Application quitting on adding data
- I recently loaded and installed QGIS on my work machine. Whenever I try to "add data" the application immediately qu...
-
05:16 AM Bug report #577 (Closed): Error reading ArcGIS Binary Float Grid files (FLT)
- Quantum 0.8.0 (Titan) crashes when I try to load a FLT file created in [[LandSerf]] or Oasis Montaj Viewer. The previ...
-
- I've build the qgis 0.8 on a fc6 system and I've encountered the same problems with measuring tool as described in th...
2007-02-06
-
- Replying to [comment:1 homann]:
> When you run ./configure, a file named config.log is automatically created. This is... -
- When you run ./configure, a file named config.log is automatically created. This is my config.log which doesn't look ...
-
04:28 AM Bug report #573 (Closed): upgrade to titan but it won't start as I get a segmentation fault
- I have upgraded to titan but QGIS will no longer start - I get a segmentation fault on start up. I was able to use t...
-
- The attached file is a .exe and not a . dll (properties = C++ application development framework). May be i do somethi...
-
-
- There were missing libraries with the program dsitribution. In the mean time, try this:
1) In the directory where qg... -
- There were missing libraries with the program dsitribution. In the mean time, try this:
1) In the directory where qg... -
- [[GuyDLL]].odt: The first 5 dll have an error but two exist:Grassplugin.dll and Grassprovider.dll and 3 doesn't exist...
-
- Replying to [comment:10 homann]:
> 1) The crash is something you might see, but not directly related to this (see #57... -
- Okay, a couple of things:
1) The crash is something you might see, but not directly related to this (see #571).
2... -
- Replying to [comment:8 homann]:
> Thanks! Using Prompt for projection, qgis crashes for me (which I'll look into).
F... -
- Thanks! Using Prompt for projection, qgis crashes for me (which I'll look into). Can you repeat with using 'Global' s...
-
- Thanks for the instruction.
1. built QGIS 6540 with debug
2. run QGIS, set Settings->Options->Projection->Prompt fo... -
- Thanks for the instruction.
1. built QGIS 6540 with debug
2. run QGIS, set Settings->Options->Projection->Prompt fo... -
09:32 AM Feature request #575 (Closed): API Feature Request: Concrete subclass of QgsVectorDataProvider wi...
- Implementing a new [[QgsDataProvider]] class can be difficult.
So I would like to suggest adding a new class to the ... -
-
-
- Also crashes trunk. The view becomes a VERY zoomed in version of the raster. The raster reading algorithm scales the ...
-
- 1) Start qgis
2) Turn on projection with default WGS84
3) Load topo.tif (see #561)
4) Out of memory abort
2007-02-05
-
- This is not necessary, and happens to be diturbing - I have to re-collapse the layer each time I change it's transpar...
-
- I have proj 4.4.9 and gdal 1.3.1. Edgy eft standard installation I believe. It also works on my win32 machine with sv...
-
- Replying to [comment:4 homann]:
> With 0.8 and 0.9 (trunk) I get the following result, which is QGIS SRSID 2267.
>
... -
-
-
-
- If you could attach the GRASS vectors, I will have a look.
-
- SYSTEM
QGIS 0.8 Linux [[OpenSuse]]10.2 Spearfish60 dataset
Files used to create my QGIS system are
gdal-1.3.2-1suse... -
- This is the same defect as Ticket 423 but on Suse10.2 Linux
-
- With commit:df2b8b28 (SVN r6535), planimetric measurements are available as an option (for 0.9)
-
-
- OK, I looked a bit at GRASS. You can calculate the area either as planimetric or ellipsoidal. In qgis 0.9, planimetri...
-
- Downloaded the full_circle.shp and tested it in trunk . With projections off, the areas were close enough (> 10 digit...
-
- Length measurment errror should be fixed in trunk now ().
-
04:43 AM Bug report #523: Georeference tool
- Thanks!
2007-02-04
-
- QGIS crashes when adding a wms layer.
-
-
- It also works in latest svn for 0.8, rev 6524.
-
- With 0.8 and 0.9 (trunk) I get the following result, which is QGIS SRSID 2267.
"+proj=utm +zone=33 +ellps=WGS84 +da... -
- With 0.8 and 0.9 (trunk) I get the following result, which is QGIS SRSID 2267.
"+proj=utm +zone=33 +ellps=WGS84 +da... -
- Replying to [comment:2 homann]:
> Qgus can only handle projections that are defined in its database. Please define yo... -
07:31 AM Bug report #569 (Closed): GPS device editor broken
- List with devices is wrongly connected to device properties dialog. I will attach screenshot with step by step instru...
-
- See #560 / #523. World file is corrupt.
-
- See #560 / #523. World file is corrupt.
-
- I have a tiff file, used regularly as a learning tool. The tiff loads fine in .8 for windows, but after using the geo...
-
- I have a tiff file, used regularly as a learning tool. The tiff loads fine in .8 for windows, but after using the ge...
2007-02-03
-
- It was a problem with malformed lines, such as an extra line break at the end of dataset. If any line has less than 2...
-
- It was a problem with malformed lines, such as an extra line break at the end of dataset. If any line has less than 2...
-
- Fixed in / . Uninitialized variables made win32 behave differently.
-
- Fixed in / . Uninitialized variables made win32 behave differently.
-
- Fixed in / .
-
- Fixed in / .
-
- What version of windows do you have?
Download http://www.dependencywalker.com/ and run qgis from within that program,... -
- What version of windows do you have?
Download http://www.dependencywalker.com/ and run qgis from within that program,... -
- Qgus can only handle projections that are defined in its database. Please define your own projection with the values...
-
- Thank you for this patch. I applied it to svn (). I will also make similar changes to svn head where this change is a...
-
- Thank you for this patch. I applied it to svn (). I will also make similar changes to svn head where this change is a...
2007-02-02
-
11:52 AM Bug report #567 (Closed): Shapefile editing oddities and errors
- I have been tinkering with QGIS 0.8 editing some shapefiles. I have found a couple of problems. First, when finishi...
-
02:39 AM Feature request #566 (Closed): Load multiple GRASS maps into QGIS
- Hi,
when loading e.g. SHAPE files, I can select multiple maps and they will be imported in one step. It would be ver...
2007-02-01
-
- A duplicate of #556. I must have hit submit too soon. Sorry.
Maciek
-
- A duplicate of #556. I must have hit submit too soon. Sorry.
Maciek
-
- Confirmed in 0.8 release. Works in unstable (HEAD) version.
-
02:31 PM Bug report #252 (Closed): query builder missing for PostGIS
- Should be fixed in 6483 (0.8 branch) and 6484 (trunk).
-
- Should be fixed in 6483 (0.8 branch) and 6484 (trunk).
-
12:42 PM Feature request #565 (Closed): Do not render features or their labels if their classification val...
- [[QgsVectorLayer]] calls the renderer to have it determine the pen, brush and/or marker to use to draw the feature. T...
-
- Fixed by , 12 digits precision.
-
- Fixed by , 12 digits precision.
-
- Did you compile from source, or download the qgis-0.8.0 version?
-
- I installed it on others computers. Same stuff.
I uninstall/download qgis-0.8.0_setup.exe and install it, same stuf... -
- I installed it on others computers. Same stuff.
I uninstall/download qgis-0.8.0_setup.exe and install it, same stuf...
2007-01-31
-
- Hi wonder,
I interpreted the first comment from morb_au in that way, that his local copy of HEAD (probably outdated ... -
- There's no such improvement yet... attribute table needs to be redesigned to use Qt model/view architecture and that'...
-
- Hello,
is this improvement already included in current trunk of QGIS? I would like to see this included soon since t... -
- Still happens with the 0.8.0 release (binary from qgis.org).
I find if I use a lower resolution vector polygon (NOAA... -
- Hi,
it still crashes with the 0.8.0 release, uploading latest crash info as bug attachment and reopening the bug.
(... -
- Hi,
it still crashes with the 0.8.0 release, uploading latest crash info as bug attachment and reopening the bug.
(... -
09:18 PM Bug report #564 (Closed): gpx provider saves coordinates to low precision
- After creating a new GPX layer then adding and saving waypoints, the precision of the waypoint coordinates are reduce...
-
- The points in the .points file are in an internal format, and we do not use GDAL to generate world file. Have you tri...
-
- I can go back and check, but I as I recall using negative line numbers with GCPs caused the image to flip upside down...
-
- We had some issues where if proejction was turned on when you entered georeference tools, it wouldn't work. have you ...
-
12:37 PM Bug report #563 (Closed): qgis on opensuse 10.2 64-bit version
- i can't get it to install
-
- getFeatureInfo requests only work correctly if the map window is full, i.e. there is no additional white space above,...
-
- QGIS fails to recognize a valid projection info in rasters and vectors and defaults to WGS84. Please see that the ras...
-
- Please attach the .tif and the .points file to speed debugging.
-
- Please try either of:
1) Turn off projection.
2) Update to the latest SVN snapshot from 0.8 or trunk (requires comp... -
06:14 AM Bug report #560 (Closed): georeferencing tool
- Dear List,
i tried to georeference a *.tif with qgis 0.8 and the following *.tfw File was written:
0.126227
0
0
-0.... -
- Hi Martin,
excellent! The button works again.
thanks,
Markus -
- Should be fixed in commit:99a0d05e (SVN r6475).
Martin -
- Should be fixed in commit:99a0d05e (SVN r6475).
Martin -
04:09 AM Bug report #559 (Closed): Error connecting to SGU source in Sweden
- Got an error message from Quantum asking me to report this:
(Unknown error code from a post-1.3 WMS server)
The WMS ...
2007-01-30
-
- Now release 0.8 is released and I want to ask for the state of solution. My DB has more than 300 Geo-Layers and much ...
-
- WMS support is working well inside version 0.80beta2. Broken only in final release.
-
- Allow the user to create layers on the fly where the layer shows a circular or rectangular area. These areas can eith...
-
- Allow the selection of multiple layers for editing of the same layer properties. eg setting the projection visibility...
-
- 0.8 SVN 6453
Please update all the occurences of "Field" term in relation to GRASS vectors to "Layer". These are two... -
- 0.8 SVN 6453
Please update all the occurences of "Field" term in relation to GRASS vectors to "Layer". These are two...
2007-01-29
-
- Tried to add the original jpeg file, but was too large at 3.2 MB
2007-01-27
-
- This should be implemented in trunk now, with km2, ha and m2 for area units. commit:51087d3a (SVN r6447) / commit:b6b...
-
- This should be implemented in trunk now, with km2, ha and m2 for area units. commit:51087d3a (SVN r6447) / commit:b6b...
-
- Measurements have changed a bit in trunk. I don't think it makes any difference, bu it's worth a check. I'm not GRASS...
-
- I can't reproduce this. It works for me both in trunk (compiled on win2k) and 0.8 (windows binary download).
-
- I can't reproduce this. It works for me both in trunk (compiled on win2k) and 0.8 (windows binary download).
-
- Measurement units are now selectable in trunk.
-
- Is it possible to supply the image?
-
- Duplicate of #450. Fixed in 0.8.1 ()
-
- Duplicate of #450. Fixed in 0.8.1 ()
-
- I can reproduce this with opening a raster layer and projection 2673.
Works for me in trunk (compiled on win2k).
No p... -
- I can reproduce this with this input file:
----
X;Y
0;0
----
It works with 10.000 lines of similar data in trunk, h... -
- Worksforme in 0.8.1 ( / commit:b6b92c9b (SVN r6451)). If any more info is available, I'm glad to re-open (see above).
-
- Worksforme in 0.8.1 ( / commit:b6b92c9b (SVN r6451)). If any more info is available, I'm glad to re-open (see above).
-
- Worksforme in trunk on win32 commit:51087d3a (SVN r6447) / commit:b6b92c9b (SVN r6451). If any more info is available...
-
- Worksforme in trunk on win32 commit:51087d3a (SVN r6447) / commit:b6b92c9b (SVN r6451). If any more info is available...
-
- Worksforme in 0.9 on win32. If any more info is available, I'm glad to re-open (see above).
-
- Worksforme in 0.9 on win32. If any more info is available, I'm glad to re-open (see above).
2007-01-26
-
- A fix is in for 0.8 branch and in development branch.
Please test and reopen this bug if there is still a problem.
... -
- A fix is in for 0.8 branch and in development branch.
Please test and reopen this bug if there is still a problem.
... -
- This problem is not reproducible with all GRASS vectors - usually a correct key is reported.
To reproduce it use the... -
- When I'm querying a GRASS vector I get a strange result that a varchar column (which is not the key column) is mentio...
-
- I have also observed this behaviour.
Are you trying to draw a polygon with holes by inserting extra segments from t...
2007-01-25
-
- whenever I load a WMS with QGIS 0.8 (MacOSX) version, I can do the lookup of the [[GetCapabilities]] but when I selec...
-
- I would love QGIS be able to visualize vector lines directions. Like GRASS does.
It would be usefull eg. for hydrolo... -
05:43 AM Bug report #551 (Closed): QGIS does not allow to load themes which were created in GRASS using v....
- It is not possible to load GRASS-layers into QGIS, which were created using v.external. These layers can be loaded in...
-
- P.S.
Using 0.8 SVN 6453. -
- 1. add a GRASS vector
2. open it in GRASS Edit
3. select one of the tools:
Move vertex
Add vertex
Delete verte... -
- P.S.
I'm reffering to 0.8 SVN 6453.
Maciek
-
- 0.8 SVN 6453
If a layer is missing from the project being opened, all the layer groups in the project are lost and a...
Also available in: Atom