Activity
From 2009-02-24 to 2009-03-25
2009-03-25
-
12:54 PM Bug report #1596 (Closed): Action tab in vector layer properties does not warn you, if action nam...
- If you are adding some action to the vector file and do not set the action name (from whatever reason), the action is...
-
- While loading large vector (postgis) data, it is possible to switch the layers off, while the data are beeing rendere...
-
04:52 AM Bug report #1594 (Closed): QGIS does not start due to GRASS libraries
- If You compile anything against GRASS 6.4 or newer it will NOT run with pre-6.4 GRASS libs. Remove pre-6.4 GRASS from...
-
- If You compile anything against GRASS 6.4 or newer it will NOT run with pre-6.4 GRASS libs. Remove pre-6.4 GRASS from...
-
- hi,
while starting QGIS, I get:... -
02:32 AM Bug report #1310 (Feedback): Saving/Loading Unicode data in shapefiles
- Replying to [comment:5 zachariahyoder]:
> I have repeated the steps described by cdavilam and it works for me in both... -
- Replying to [comment:5 zachariahyoder]:
> I have repeated the steps described by cdavilam and it works for me in both...
2009-03-24
-
12:25 AM Feature request #1593: Oracle GeoRaster Plugin
- Please go ahead and built on top my code. It is currently unmaintained so I am happy if it will be reused and helpful...
-
08:29 PM Feature request #1593 (Closed): Oracle GeoRaster Plugin
- This plugin depends only on GDAL to compile.
It is basically a UI similar to the [[PostGIS]] UI. It manages the Ora... -
06:34 PM Feature request #1591: Coordinate capture plugin: lat/long reversed?
- Is the same order in the status bar?
-
06:02 PM Feature request #1591 (Closed): Coordinate capture plugin: lat/long reversed?
- Latitude and longitude seem to be listed in reverse in the CRS field of the plugin.
MA is at 42,-71 not -71,42 as the... -
- Are you sure the layer CRS is properly declared and reprojection on the fly is enabled? Why not to set the project CR...
-
- What does the projection capture selection button do?
The only effect it seems to have is:
a) if set a geographic co... -
- It's because QGIS doesn't save properly geometry of some docked widgets when QGIS window is maximized. I still can't ...
-
- Would it be possible to make this panel a little denser? There's an awful lot of empty space between rows of fields t...
-
- Seems to work fine now in 1.0.1.
-
- Seems to work fine now in 1.0.1.
-
02:29 PM Bug report #1585: add missing svg image sources
- Can you be more specific? I've already committed any SVG sources I have. Any other images were done with the GIMP pro...
-
02:04 AM Bug report #1585 (Open): add missing svg image sources
- Most svg images are missing from source code (only derived png are there). Please add them.
-
- Just a note - ir you add an 'r' in front of revision numbers, trac automatically will create a link to the change set...
-
01:47 PM Bug report #1589 (Closed): problem visualizing WMS defined with a EPSG:NONE srs
- Hello all !
We have small problem, with our WMS service and qGis.
We expose some data in WMS, but we have a customi... -
08:16 AM Bug report #1588 (Closed): invoking ZoomToSelected() on a single point feature puts map at scale 2:1
- Hi,
I wrote a python plugin and I use [[ZoomToSelected]]() to zoom to a point feature.
The problem is that QGIS zoo... -
- Note that I have uncommitted changes to the table UI so please hold off making changes until they are committed. I wi...
-
05:55 AM Feature request #3928: Case sensitivity checkbox
- The implementation itself should be indeed simple, there's just a UI design decision needed - whether to put it direc...
-
- I agree this is an useful improvement, and it appears trivial to fix: can someone deal with it?
-
- Is this still true?
-
- This has been fixed in .
Frank - to explain the inner working of the CRS recognition: given a proj4 string, qgis tri... -
- This has been fixed in .
Frank - to explain the inner working of the CRS recognition: given a proj4 string, qgis tri... -
02:53 AM Bug report #1489: GRASS Plugin: Map name input field not working correctly for modules that take ...
- I have tried:...
-
- Replying to [comment:3 pcav]:
> Also, I do not understand why having both db.connect and db.connect.schema (the secon... -
- The idea is having in the same window both connection parameters and
login credentials. The current situation is quit... -
- WMS and WFS services of Sardinia Region:
WFS service (geoserver)
http://webgis.regione.sardegna.it/geoserver/wfs?
Im... -
- On the basis of a brief discussion about Qgis 1.0.x libraries this is
the current point of view by Debian packagers a... -
- It would be good to make the plugins (mapserver and ftools) available through the standard repo,
so everybody could u... -
- There is a problem in PROJ4: there are several datum for EPSG 3003 (and
others), but in PROJ4 the epsg file does not ... -
- Adding WFS-T support would be an important addition to QGIS
2009-03-23
-
01:11 PM Bug report #1582: osgeo4w qgis-grass plugin crashes on Windows Vista
- I forgot an important thing: the crash happens whenever db.exe is invoked
-
- Whenever I try to use the qgis-grass plugin (osgeo4w stack) on Windows Vista, I receive a complete crash of QGis. It ...
-
- fixed in 10403 and 10411
-
- fixed in 10403 and 10411
-
11:20 AM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- I just updated to and can confirm that QGIS-GRASS plugin creates a new mapset with the correct units.
-
08:14 AM Bug report #1581 (Closed): fTools crash
- Fixed in trunk...
Carson -
- Fixed in trunk...
Carson -
- From the shell:
Warning: QMetaObject::connectSlotsByName: No matching signal for on_btnHelp_clicked()
Warning: QPixm... -
- When calculating basic statistics on a field with all 0s, I get a python error (division by 0), and qgis crashes
-
- Is this still true for qgis 1.0.x?
2009-03-22
-
- Idealy, one should, from within QGIS, be able to create a tile index (just a frontend to gdaltindex) and load this in...
-
- In addition, it would be good to apply the same style to all tiles.
-
- In fact, icons do change, but only after restarting qgis, whereas core icons change in real time. It would be good to...
-
11:33 AM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- The text associated with the foot units is not significant, it is just a clue for the user. The proper value is asso...
-
10:14 AM Bug report #1534: Cannot Select Custom Projection (CRS)
- I'm also attachinbg updated qgis.db and srs.db for convenience.
-
- I have added '--qgis' switch to script http://www.sieczka.org/prog/qgis/qgis_srs.sh so that it's also able to create ...
-
- I think it's a reasonable requirement for packagers to add "depends: python" statement for the package for qgis pytho...
2009-03-21
-
06:54 PM Feature request #1518: python binding does not link with libpython
- well, if it is not directly linked against libpython, then there is no signal that python bindings is using python. i...
-
- Replying to [comment:1 pcav]:
> Is this still true for 1.0.1?
yes. -
- Is this still true for 1.0.1?
-
- Replying to [comment:1 pcav]:
> Distnces in latlong projections do not have much sense.
Distances in latlon is only ... -
- Distnces in latlong projections do not have much sense.
-
10:37 AM Bug report #1470: Build error in 1.0.0 (linguist problem in French translation), Qt 4.5.0 beta1
- Oh I am such a knucklehead. Sorry, forgot to work around it and run cmake again. Here are some more;
qgis_mn.ts
qgis... -
- Unfortunately does not appear to be. But your almost there. Here is the only one giving me trouble;
Updating '/usr/s... -
- Still true?
-
- This bug has now been duplicated (with supplied patch) here: https://trac.osgeo.org/qgis/ticket/1522
-
- This bug has now been duplicated (with supplied patch) here: https://trac.osgeo.org/qgis/ticket/1522
-
- This is fixed (new implementation) in trunk (rev.10338)
This will not be backported due to significant changes to th... -
- This is fixed (new implementation) in trunk (rev.10338)
This will not be backported due to significant changes to th... -
- What QGIS version do you use?
-
- What is the current state of this?
-
- Does recently added Better Table by Martin solve this?
-
- Is this still valid? Many things are changed, please test it again and close it if appropriate.
-
- In absence of a reply, I'm closing it. Please reopen it if appropriate.
-
- In absence of a reply, I'm closing it. Please reopen it if appropriate.
-
- See also #1341
-
- See also #1341
-
- laurent01, could you please add more detail? Many OSX users are using QGIS, apparently without problems. Please test ...
-
- There is now a warning that measuring in latlong CRS gives not-so-reasonable results. This is inherent to the project...
-
- There is now a warning that measuring in latlong CRS gives not-so-reasonable results. This is inherent to the project...
-
- Apparently a duplicate of #1393
-
- Apparently a duplicate of #1393
-
- I tried to reproduce the bug on Debian 64bit, but I cannot. Please test again and let us know the specific conditions...
-
- See also #1575
-
- I do not think this may be called a bug, but a difficulty in programming. Please post your question to the dev list.
... -
- I do not think this may be called a bug, but a difficulty in programming. Please post your question to the dev list.
... -
- jared, could you please post the shp that causes the crash? without it it is very difficult to reproduce the problem,...
-
- Running attached WKT file through "testepsg" returns the same problem ("Foot_US" only recognised in the ESRified part...
-
- Indeed it looks to be OGR problem as Markus suggested. From my tests - the proj4 string for this projection (epsg 267...
-
-
05:32 AM Bug report #1350: WMS connection don't work through proxy
- I think this bug should be closed now. It works fine for me.
Andreas -
- this is now addressed with the proxy exceptions, available in trunk.
-
- this is now addressed with the proxy exceptions, available in trunk.
-
- I confirm this bug is still present on Debian too, as outlined in comment:10.
Very annoying, long lasting (2 years!)... -
- Seems to be implemented now
-
- Seems to be implemented now
-
- seems to work now in current trunk
Thanks! -
- seems to work now in current trunk
Thanks! -
- It would be nice if we could have a status indicator when loading a
qgis-project. Some of my project have 20+ layers ...
2009-03-19
-
09:09 PM Feature request #699: problem when moving quickly a layer trough the legend
- I last saw this in version 0.11, but am unable to test it in version 1.0 under Windows as I don't see an executable I...
-
08:57 PM Feature request #699: problem when moving quickly a layer trough the legend
- This is still a problem. I do not recall this being an issue for me up to, perhaps including, version 1.0.0. With tru...
-
03:23 AM Feature request #1579 (Closed): switching back to the prior view/extend is only possible one step
- IMHO it would be very useful to have the "back to prior zoom"-button switching back to more of the foremer views7exte...
-
02:03 AM Feature request #1578 (Closed): Basic shapes in map composer
- It would be great if developers add ability to draw basic shapes such as polygons circles lines in map composer. If ...
2009-03-17
-
09:34 AM Bug report #1576: wms: no way to set width and height, but no error message when beyond max
- As images speak more than words, here's a "screencast":http://geog-pc40.ulb.ac.be/qgis/wms_bug.gif of the problem.
A... -
- This is really a GDAL issue, to be soved by packagers, and depending on legal rather than technical issues
-
- This is really a GDAL issue, to be soved by packagers, and depending on legal rather than technical issues
-
- Fixed in #10282
-
- Fixed in #10282
-
05:01 AM Bug report #1350: WMS connection don't work through proxy
- Replying to [comment:6 jef]:
> Replying to [comment:5 jef]:
> > Perhaps it helps when you switch from [[HttpProxy]] t...
2009-03-16
-
10:45 PM Bug report #1537: Units unknown in GRASS mapset creation for EPSG 26745
- I can confirm this in OSX as well from an install of all the latest frameworks etc from http://www.kyngchaos.com as o...
-
- I am able to export a composed map to SVG, but the result is unusable.
Quick print's a bit better, but not ideal, so ... -
- Replying to [comment:2 pcav]:
> Please use the GRASS plugin to load GRASS raster
That's not the point. QGIS is (and ... -
- Please use the GRASS plugin to load GRASS raster
-
- Please use the GRASS plugin to load GRASS raster
-
- In the current implementation of the wms client, there is no way to set a max width and height. Trying to access a se...
-
- Presumably solved in the latest versions of the installer. Reopen it if appropriate.
-
- Presumably solved in the latest versions of the installer. Reopen it if appropriate.
-
- Probably invalid with newer versions. Please reopen it if appropriate.
-
- Probably invalid with newer versions. Please reopen it if appropriate.
2009-03-14
-
12:43 PM Bug report #1567: Wrong band order in "Identify Features"
- fixed in commit:23f865a5 (SVN r10279)
-
12:21 PM Bug report #1567 (Closed): Wrong band order in "Identify Features"
-
- I will let this stay in the trunk for a couple of days before merging into the v1.0 branch.
2009-03-13
-
11:45 PM Bug report #1569: Untranslatable "Close" button in QGIS 1.1.0
- The same applies to all dialog buttons (like "Save", etc.) for QGIS 1.1.0. Perhaps an updated qt_ru.ts is required.
-
10:18 PM Bug report #1575 (Closed): QGIS crashes while attempting to change symbology to continous color
I'm running QGIS 1.0.1 under 64-bit Ubuntu 8.10. When doing this, I get the following errors:-
08:19 AM Bug report #1572: new features will not display before spatial index is recreated/QGIS restarted
- same thing happens again today, after a restart, with the same layers. Newly added features will only show up after (...
2009-03-12
-
- Hi,
I have QGIS 1.0.1 for windows installed from OSGEO4W.
If I try to open a simple ECW (67 MB), QGIS is taking too... -
01:58 PM Bug report #1573 (Closed): lines/frames of items remain in map composer after moving or deleting ...
- After moving or removing items in the map composer - using qGIS 1.0.1 under Windows XP - SP3, it seems old frames are...
-
- I noticed a similar thing on Windows couple of versions ago.
-
- I confirm. I observed the same issue several times.
-
- I've imported some shapefile-exports (Geomedia) and added line-features in QGIS. The lines were showing up nicely, un...
-
- Steps to reproduce:
0) in the legend window, create groups and drop different layers to different groups (to keep eve... -
- Replying to [comment:17 pcav]:
> The problem seems still there:
>
> Warning: Object::disconnect: Unexpected null par... -
- Replying to [comment:17 pcav]:
> The problem seems still there:
>
> Warning: Object::disconnect: Unexpected null par...
2009-03-11
-
-
- It is was I expected, a problem comparing doubles. Even thought -1.196483 was in the ascii grid and the color map the...
-
- It is was I expected, a problem comparing doubles. Even thought -1.196483 was in the ascii grid and the color map the...
-
06:25 AM Bug report #1479: map composer: adding scalebar when view is added crashes qgis
- Note that you can avoid the problem by working with the english version:
in the QGIS options, "locale" tab ("paramètr... -
- The problem seems still there:
Warning: Object::disconnect: Unexpected null parameter
Fatal: ASSERT failure in QList... -
- The problem seems still there:
Warning: Object::disconnect: Unexpected null parameter
Fatal: ASSERT failure in QList... -
- When snapping is active, it seems that moving individual vertices immediately after a vertex was added with "add vert...
2009-03-10
-
- Replying to [comment:5 jef]:
> Perhaps it helps when you switch from [[HttpProxy]] to [[HttpCachingProxy]] (but I thi... -
- Replying to [comment:4 marchesinivan]:
> Warning: UNEXPECTED RESPONSE: [HTTP/1.1 502 Proxy Error ( The specified Secu... -
- The button "Close" in all dialogs (like file opening) in 1.1.0 appears untranslated, (when built and started with Qt ...
2009-03-09
-
06:10 AM Feature request #1568 (Closed): some properties menu items do nothing if certain legend elements ...
- Load a vector layer. Make sure the legend element is expanded so you can see the symbolism.
Click on the symbolism s... -
- The list of bands,values on "Identify Features"/"Identify Results" should not use alphabetic sorting.
See what happ... -
01:25 AM Bug report #1566: Fix install paths on 64 bit linux
- You are right, changing the path for windows is probably bogus, replacing patch. Should be ok now.
2009-03-08
-
- Replying to "hanno":/issues/show/1566:
> On 64 bit linux, libraries should go to /usr/lib64, not /usr/lib. Attached p... -
- On 64 bit linux, libraries should go to /usr/lib64, not /usr/lib. Attached patch will fix this.
-
- Ok, so that was the problem. I had previous day's version, and the packages didn't automatically upgrade even when as...
-
- Ok, so that was the problem. I had previous day's version, and the packages didn't automatically upgrade even when as...
2009-03-07
-
02:55 PM Bug report #1565: grass vector attributes are not available in qgis
- I loaded the *spearfish60* mapset, added the *landcover* vector layer, clicked on "Open Attribute Table": I see a thr...
-
01:13 PM Bug report #1565: grass vector attributes are not available in qgis
- I have made a test with both the 1.0 and the 1.0.1 (installed using the official repository) under Ubuntu 8.10 and wi...
-
- Replying to [comment:1 msieczka]:
> What is the output of 'v.info -c' for your GRASS vector map?
v.info -c geologica... -
- What is the output of 'v.info -c' for your GRASS vector map?
2009-03-06
-
- When I try to load a Grass vector data in Qgis, the attributes are not available. Only the cat column.
I'm using Debi...
2009-03-05
-
09:05 PM Feature request #515: Thoroughly use OGR
- Hi Tim:
I added a combo to openvectordialog and removed it from the file selector. This way the encoding can be app... -
- Hi Godofredo
I tested your patch here. The dialog has some layout issues making the upper frame impossible to see he... -
- should be fixed in /
-
- should be fixed in /
-
06:18 AM Bug report #1564 (Closed): Crash when changing edit widgets for vector layer attribute tables
- Go to the vector layer properties, then the attributes tab. Change any of the comboboxes for the edit widgets and the...
-
03:18 AM Feature request #1563 (Closed): Raster: tile indexes
- Load multiple images as one layer. Like in "MapServer":http://mapserver.org/:
[http://mapserver.org/optimization/til...
2009-03-04
-
- I have been working in a patch for open vector layer dialog to improve it and extend it to support database, protoco...
2009-03-03
-
10:00 PM Bug report #1562 (Closed): Unable to Open one or more project layer
- Hi All,
I am loadin a qgs project to my own QGIS application in qt.
it shows an error like unable to open one or more... -
- Replying to [comment:3 neteler]:
> OK, but I am on Version 1.0.x... cannot find it there.
but in 1.0 it's still ther... -
- I'm using debian testing
I have just installed qgis 1.0.1
We have a proxy of this type: 192.168.10.13 - port: 80
I ...
2009-03-01
-
- When you have a missing layer when opening a qgs project file, you have the option to find the missing reference file...
2009-02-27
-
06:12 AM Bug report #1484 (Closed): qgis crashes while editing a layer in a project with missing layers
- Hi Marco
I can not reproduce the error with commit:bc0826af (SVN r10244) as well. I close the ticket.
regards
Cédric -
- Hi Marco
I can not reproduce the error with commit:bc0826af (SVN r10244) as well. I close the ticket.
regards
Cédric -
- OK, but I am on Version 1.0.x... cannot find it there.
-
- fTools is in trunk:
https://trac.osgeo.org/qgis/browser/trunk/qgis/python/plugins/fTools -
- fTools is in trunk:
https://trac.osgeo.org/qgis/browser/trunk/qgis/python/plugins/fTools -
- Graticule plugin has been removed and replaced with fTools
-
- Graticule plugin has been removed and replaced with fTools
-
- OK, my bad (or say, of shpdump): the source code analysis of shpdump.c reveils that the precision loss is in shpdump....
-
- OK, my bad (or say, of shpdump): the source code analysis of shpdump.c reveils that the precision loss is in shpdump....
2009-02-25
-
10:47 AM Bug report #1479 (Closed): map composer: adding scalebar when view is added crashes qgis
- Fixed in 1.0 branch. Thanks for pasting the backtrace. The problem was visible only in connection with some translati...
-
- Fixed in 1.0 branch. Thanks for pasting the backtrace. The problem was visible only in connection with some translati...
-
- I could reproduce it both on Windows 2000 and Mac OSX (10.5.5)
Alice -
- Please submit the patch also to the 1_0 stability branch.
-
- Apparently the graticule creator no longer exists and is replaced with the (external only?) ftools.
Personally I fee... -
- Replying to "braindamage":/issues/show/1560:
> Trend Micro Internet Security has informed me that the file wxpython-2... -
- Replying to "braindamage":/issues/show/1560:
> Trend Micro Internet Security has informed me that the file wxpython-2...
2009-02-24
-
07:08 PM Bug report #1560 (Closed): virus
- Trend Micro Internet Security has informed me that the file wxpython-2.8.9.1-2tar.bz2
has a virus. This was download... -
11:14 AM Bug report #1559 (Closed): WMS-Error on QGis 1.0.0 (Kore)
- the "wms_onlineresource" in the mapfile was the problem.
Thanks, it works.
-
- the "wms_onlineresource" in the mapfile was the problem.
Thanks, it works.
-
- If possible check the "wms_onlineresource" value in the meta data of the WEB section of the mapfile (or the response ...
-
- The problem is since update to v1.0.0 (KORE). The WMS-URL, wich I type was: http://itcgeoservices01/cgi-bin/mapserv?m...
-
- bump...
Could anyone knowledgable in these things have a look at the gdb output ?
And can anyone else reproduce this...
Also available in: Atom