Activity
From 2006-07-21 to 2006-08-19
2006-08-19
-
03:58 PM Bug report #224 (Closed): name of layer can't be seen when it's created
- Looks to be fixed - reopen if it's still a problem for you.
-
- Looks to be fixed - reopen if it's still a problem for you.
-
- This behaviour contributes to the problem in ticket #8.
-
- This is the same problem as ticket #214
-
- This is the same problem as ticket #214
-
- Done in SVN commit:c6d88ade (SVN r5711). A make, make install, or make all in the toplevel directory will cause qgis ...
-
- Done in SVN commit:c6d88ade (SVN r5711). A make, make install, or make all in the toplevel directory will cause qgis ...
2006-08-18
-
- Brendan,
The problem here is that the wms provider does not have the proxy information set. The temporary wms provid... -
12:29 PM Bug report #240 (Closed): error in documentation or missing script
- Use the autogen.sh script instead and pass your configure parameters to it. At release, a configure script will be in...
-
- Use the autogen.sh script instead and pass your configure parameters to it. At release, a configure script will be in...
-
09:08 AM Bug report #240 (Closed): error in documentation or missing script
- The file INSTALL, in source for qgis 0.8.0 preview 1, refers to ./configure script that is missing in the package. Th...
-
02:10 AM Bug report #179: Transparent WMS Layer aren't shown transparent.
- Over the next few days I'll grab the latest Qt (4.1.4) and see if I can reproduce the error. This may be a low-prior...
2006-08-17
-
12:10 AM Bug report #179: Transparent WMS Layer aren't shown transparent.
- I'm in doubt about the relation between the two QT bugs and our problem. 1. They were discovered at version 4.1.2, th...
-
- We're in a bit of a sticky situation here. Versions of Qt prior to 4.1.4 have other problems that have caused bugs in...
-
- Ups... Of course it's my mistake. 4.1.3 throws the messages.
Your suggested solution sounds like ESRI Support. Long ... -
- Is it 4.1.0 that throws up all those warnings or 4.1.3?
I think the resolution to this is to add a release note to a... -
- Works for me as of today, and I'm not sure how would have broken it ...
If somebody else can reproduce this behavio... -
- Works for me as of today, and I'm not sure how would have broken it ...
If somebody else can reproduce this behavio... -
- Fixed in commit:b61cda32 (SVN r5703). It was "only" broken in .
-
- Fixed in commit:b61cda32 (SVN r5703). It was "only" broken in .
-
- Fixed in SVN commit:336ae2a8 (SVN r5706)
-
- Fixed in SVN commit:336ae2a8 (SVN r5706)
-
- A further fix for this problem is in SVN commit:f5433e85 (SVN r5705)
2006-08-16
-
- In QGIS 0.8.0pr2 if I select multiple polygons all them are filled with selection color (correct), but they boundarie...
-
- This problem has been fixed in qgis 0.8 preview versions (see ticket #3933).
-
- This problem has been fixed in qgis 0.8 preview versions (see ticket #3933).
-
- Fixed in svn commit:fce66036 (SVN r5704).
If there are no command line arguments, the extent is -1,-1,1,1, but if t... -
- Fixed in svn commit:fce66036 (SVN r5704).
If there are no command line arguments, the extent is -1,-1,1,1, but if t... -
- My fault. Will fix soon.
-
05:28 AM Bug report #238 (Closed): Zoom to map fails on startup
- [QGIS-SVN recompiled from scratch today]
When loading a SHAPE file into QGIS, such as:
qgis italy_state_LL.shp
it ... -
-
-
- after commit #5694 (fix for bugs 131 and 134), default fields are no longer shown
-
11:52 AM Bug report #120 (Closed): Click a shape in a shapefile, QGIS crashes
- RPM version. rpm -q returns:
geos-2.2.1-4.fc5
Obviously, I have the devel package, too, same version.
Could it be d... -
- RPM version. rpm -q returns:
geos-2.2.1-4.fc5
Obviously, I have the devel package, too, same version.
Could it be d... -
07:16 AM Bug report #120: Click a shape in a shapefile, QGIS crashes
- I have had the same problem before on 32 bit platform. I believe its an issue with GEOS. Which exact version of GEOS ...
-
- Further testing confirms the bug.
It seems to be related to the complexity of the image: with only a greyscale grass ... -
- As a side note, its worth building a spatial index on your shapefiles - it should offer significant performance impro...
-
- I tested on linux and the file loads fine for me too - I will test on mac and see if I can reproduce the issue.
-
-
- I tried your example shapefile with QGIS 0.8 SVN trunk as of 16 August 2006, Ubuntu linux, gdal 1.2.6. The file opene...
-
- OK I changed from QT4.1.3 to QT4.1.0 and the transparency works without rebuild QGIS!! It looks like QT4.1.3 is the c...
-
- Concerning your second point (couldn't open any .qgs files that was created in 0.7.3), this is normal (format of qgs ...
-
- Fixed in SVN commit:fa43c9d3 (SVN r5702)
-
- Fixed in SVN commit:fa43c9d3 (SVN r5702)
2006-08-15
-
- No it is not possible to try it with QT4.1.0 due to some bugs of QT which will have influence to the stability of QGI...
-
- I suppose the same opaque effect could be had for you when the background colour is set to non-white (through the Set...
-
- Delimited text layers don't select properly - select some points, and various points outside the selection rectangle ...
-
- Now it works, thanks.
Markus -
- That pins the problem right down. It is fixed in SVN commit:c62dbcd4 (SVN r5700). A svn update in the georeferencer d...
-
- That pins the problem right down. It is fixed in SVN commit:c62dbcd4 (SVN r5700). A svn update in the georeferencer d...
-
- Hi,
I found something:
cd /usr/local/qgis_devel/lib/qgis
ls -l | grep ref
-rwxr-xr-x 1 neteler ssi 1807886 Aug 1... -
- Note. This only occurs when one starts editing, doesn't edit anything, then stops editing. This particular mode may h...
-
- Recently, qgis has stopped allowing one to stop editing:
1. load a editable layer
2. click on the start editing bu... -
- With SVN commit:07a42c17 (SVN r5698), access to a wms server through a proxy now works for me. I get a list of availa...
-
- Speculative fix in commit:07a42c17 (SVN r5698).
Can somebody please test with a proxy for me and report back, or bui... -
- Tested the HEAD version, WMS proxy is not working at all, and gives a sparse error message.
-
- Tested the HEAD version, WMS proxy is not working at all, and gives a sparse error message.
-
- better close it? I do not think it is still valid, and has general meaning.
-
- better close it? I do not think it is still valid, and has general meaning.
-
- Fixed in SVN commit:80c49f64 (SVN r5699).
-
- Fixed in SVN commit:80c49f64 (SVN r5699).
-
- Potential fix in commit:52e80e90 (SVN r5697).
Can somebody with access to a compiler for the Windows version please ...
2006-08-14
-
- QToolButton::setPaletteBackgroundColor() is being used to colour the buttons, but appears to be a Qt3 idiom. While t...
-
- With qgis-0-8.0-win32-060724 it works for me. But my [[RedHat]] QGIS does not work. If you like to see the spatial Da...
-
- With qgis-0-8.0-win32-060724 it works for me. But my [[RedHat]] QGIS does not work. If you like to see the spatial Da...
2006-08-13
-
- should fix this, I have put a full writeup on the commit message to .
-
- should fix this, I have put a full writeup on the commit message to .
-
- Further to my commentary on 07/14/06, I got to test it out and it was found wanting. should really fix it, I have p...
-
02:38 AM Bug report #235: crash loading shape files
- Yes, I can. I attached one as example (it happens with all my shapes). The version is 0.6.0, the one avaliable for Ma...
-
- Is this shapefile something you can make available to the QGIS developers?
Which version of QGIS are you using? -
02:08 AM Bug report #235 (Closed): crash loading shape files
- Everytime I try to load a shapefile (created with [[ArcView]] 3.1) the QGis crashes. Actually the first time I launch...
2006-08-12
-
- That circular dependency warning occurs with other plugins too, for example, the scale bar. Are you sure that the geo...
2006-08-11
-
01:29 AM Feature request #234: ISO C++ forbids casting between pointer-to-function and pointer-to-object
- I noticed this problem when building *Lib_Refactoring-branch* branch.
BTW, is this possible to add branches selectio... -
- In file _src/core/gsproviderregistry.cpp_ compiler reports following interesting warnings:...
-
-
-
- The second method fails because when it commits, it tries to commit all attributes of a changed feature instead of ju...
-
- I think I've worked out the "spirit" of this bug, at least with regards to SVN HEAD.
If the attributes are edited vi... -
- I tried your http://www.sogis1.so.ch/cgi-bin/sogis/sogis_uep.wms WMS URL today;
It comes up with one layer (Übersic... -
- I tried your http://www.sogis1.so.ch/cgi-bin/sogis/sogis_uep.wms WMS URL today;
It comes up with one layer (Übersic... -
- Can you give the URL you are trying?
And also, just to confirm, you are not using a username nor password? -
- Hi,
on my Mandriva box I have the georeferencer, but not
on RHEL4 Linux. probably due to this problem:
Making all i... -
- Appled to head
-
- Appled to head
-
2006-08-10
-
01:11 AM Bug report #232 (Closed): can't identify qgis version with precision
- I send only some tickets and I think not very OK to do that.
I've load 3 differentes versions of windows qgis that I ... -
- Hi,
apparently the input field for rows,cols in v.mkgrid is overzealously checked.
The comma separator cannot be ent... -
- Fixed in revision 5686.
Radim -
- Fixed in revision 5686.
Radim -
- I cannot reproduce this on Linux.
Can you try with other databases (DBF,SQLite,Postgres) to see if it is
realy relat... -
- This is enhancement, not defect.
-
- Fixed in revision 5685.
Radim -
- Fixed in revision 5685.
Radim -
- I think that you mean the message:
"Orphan record was left in attribute table. Delete the record?"
That is correct. ... -
- I think that you mean the message:
"Orphan record was left in attribute table. Delete the record?"
That is correct. ... -
- I cannot reproduce this. You can reopen the ticket if
you can still reproduce the problem. In that case please
spec... -
- I cannot reproduce this. You can reopen the ticket if
you can still reproduce the problem. In that case please
spec... -
- Currently I dont work on Win build, assigned to Gary.
-
- I have assigned this ticket to Martin as I dont know even what it is
about. I just see 'canvas' ...
Radim
-
- Currently I am not working on Win build. AFAIK Gary
is making Win build so I assigned it to him.
Sorry Gary, I kn... -
- I tried with various corrupted vector files but I cannot get such error. I thought
that if the vector directory is p... -
- I tried with various corrupted vector files but I cannot get such error. I thought
that if the vector directory is p... -
- Done in SVN
-
- Done in SVN
-
- Unfortunately v.surf.idw parameter in GRASS was changed from col to column.
This has broken QGIS. I have changed the ... -
- Unfortunately v.surf.idw parameter in GRASS was changed from col to column.
This has broken QGIS. I have changed the ... -
- Fixed in revision 5680.
Radim -
- Fixed in revision 5680.
Radim -
- Fixed in SVN commit:6e48f228 (SVN r5680).
-
- Fixed in SVN commit:6e48f228 (SVN r5680).
2006-08-09
-
- After some tests I can't reproduce this issue. I'll set the ticket to invalid until I can report further informations...
-
- After some tests I can't reproduce this issue. I'll set the ticket to invalid until I can report further informations...
-
- Fixed in SVN commit:12fff4ce (SVN r5678)
-
- Fixed in SVN commit:12fff4ce (SVN r5678)
2006-08-08
-
- Fixed in revision revision 5676.
BTW, map tool handling must be enhanced somehow, especially switching between stand... -
- Fixed in revision revision 5676.
BTW, map tool handling must be enhanced somehow, especially switching between stand... -
- Fixed in revision 5675.
Radim -
- Fixed in revision 5675.
Radim -
- The commit:1cc1c875 (SVN r5672) commit may also help when trying to digitise on a blank map and no other layers loaded.
2006-08-07
-
03:30 PM Bug report #230 (Closed): zoom to all button not picking up changes to the extent of PostGIS laye...
- Oeen a single [[PostGIS]] layer. Initially the zoom to layer extent within the layer properties menu does the same as...
2006-08-06
-
- Applied to head as SVN commit:a247aa52 (SVN r5671)
-
- Applied to head as SVN commit:a247aa52 (SVN r5671)
-
- FYI, I applied this small patch to configure.in from the branch called "Lib_Refactoring-branch":https://svn.qgis.org/...
-
- This is a tiny enhancement that prints compilation flag values in the configuration summary at the end of ./configure...
-
- I'm not sure what's the idea behind conditional statements in qgsproject.cpp file, in lines: 126, 204 and 274 where f...
-
- Additional patterns to be ignored:...
-
- I'd like to ask for setting *svn:ignore* property on the non-versioned files and folders in the QGIS repository.
Here...
2006-08-05
-
- Upgrading to gdal 1.3.2 fixes the problem.
-
- Upgrading to gdal 1.3.2 fixes the problem.
-
- Ahhhhhhhhhhhh! I've spent hours tracking this bug down, and it's exactly the same as ticket #3933!
I'll try gdal 1.... -
07:31 AM Bug report #219: layer point (.shp) become invisible on qgis-0.8.0-win32-060724
- This looks like ticket #3933.
-
- Saved project is not reloadable when it contains a [[MapComposition]] with legend
2006-08-04
-
- People are regularily asking questions on how to use attribute actions to do the same thing to a selection of feature...
2006-08-03
-
- I add it was possible with qgis-0.8.0_pre1 on windows
-
- on GQIS-0.8.0_preview-1_source working on linux
we can't see name of vector layer at its creation in "légende". it a... -
08:07 AM Bug report #223 (Closed): selection is not updated when changing selection by clicking on row hea...
- The selection of vector features does not change if the attribute table selection is changed by clicking on the row h...
-
- Applied in SVN
-
- Applied in SVN
2006-08-02
-
- Hi,
a trivial cosmetics fix attached... for consistency
in the plugin manager.
Markus -
- I want to connect to a wms server of my network (directly without proxy, logon passwd)
on all windows version qgis s... -
- error "could not open SRS database /resources/srs.db error (14) : unable to open database file" when we create vector...
-
- layer points (.shp) seem be create but when we stop edition, points become invisible.
after the layer has been delete... -
- can't create polygon on my postgis database with qgis-0.8.0-win32-060724
2006-08-01
-
- Fixed in SVN commit:58e78448 (SVN r5658)
-
- Fixed in SVN commit:58e78448 (SVN r5658)
-
- *Ubuntu distros have two automake versions - 1.4 and 1.9. If system is set to use olde one (as my Kubuntu per default...
-
- This is probably necessary when the geos includes are in a different directory to the gdal include files. Change appl...
-
- This is probably necessary when the geos includes are in a different directory to the gdal include files. Change appl...
2006-07-31
-
09:36 AM Bug report #216 (Closed): spit plugin needs GEOS headers
- I have the various library dependencies isolated in separate folders. In building the spit plugin, it couldn't find ...
-
- The save as svg option in the map composer doesn't include any of the text from the composer items (e.g., legend text...
-
- I can explain why this is happening, but don't have a solution for 0.8.
If an item is visible on the map, even just ... -
- I tried the windows release and it doesn't seem to install the srs.db database in a place where qgis can find it, whi...
-
- Fixed in SVN commit:b9850de2 (SVN r5653). The 'Not Set' option now only appears if there are more or less than 1 othe...
-
- Fixed in SVN commit:b9850de2 (SVN r5653). The 'Not Set' option now only appears if there are more or less than 1 othe...
2006-07-30
-
- Doing anything related to projection selection results in crash.
OS: [[WinXP]] Home
QGIS: 0.8 preview 1 and 060724.
... -
09:11 PM Feature request #213 (Closed): Display Raster Image at 100%
- When working with raster images, it is necessary to be able to display them at their native resolution, meaning displ...
-
- Fixed in SVN commit:cc3255c3 (SVN r5652). Was easier than it appeared.
-
- Fixed in SVN commit:cc3255c3 (SVN r5652). Was easier than it appeared.
-
- If, when placing a scalebar, legend, or label on the map composer, one presses the mouse button, moves the mouse, the...
-
- Fixed in SVN commit:a60d85ad (SVN r5650). I fixed this, but clearly didn't commit it... Thanks mhugent
-
- Fixed in SVN commit:a60d85ad (SVN r5650). I fixed this, but clearly didn't commit it... Thanks mhugent
-
10:31 AM Bug report #211 (Closed): Broken buliding process
- Buliding porcess of current svn stops with " ./.libs/libqgis_gui.so: undefined reference to @vtable for [[QgsMapToolI...
2006-07-28
-
- Fixed in SVN commit:05433ca8 (SVN r5647).
Problem was that under Xwin32, showing a hidden dialog box didn't work. W... -
- Fixed in SVN commit:05433ca8 (SVN r5647).
Problem was that under Xwin32, showing a hidden dialog box didn't work. W... -
2006-07-27
-
- ppp
-
01:47 AM Bug report #210 (Closed): xxx
- xxx
-
- SVN version when the change was done is commit:5c2d41dc (SVN r5646)
-
- There was request on the developer mailing list to update the parameter fields for some srs's (see below).
I have do...
2006-07-26
-
12:00 PM Bug report #208 (Closed): AC Macro for proj/sqlite gives wrong lib dir on x86_64 for the 0.8 preview
- The autoconf macro for checking for the proj and sqlite3 libs in file 'configure.in' only looks for the existance of ...
-
- Applied in SVN commit:44585e57 (SVN r5642)
-
- Applied in SVN commit:44585e57 (SVN r5642)
-
- Fixed in SVN commit:541b054d (SVN r5641).
I don't have OS X to try it out on, but I'm fairly confident that it's fi... -
- Fixed in SVN commit:541b054d (SVN r5641).
I don't have OS X to try it out on, but I'm fairly confident that it's fi...
2006-07-25
-
- This problem appears to be resolved. Reopen if not...
-
- This problem appears to be resolved. Reopen if not...
-
- The syntax error problem has been fixed in SVN commit:986ea537 (SVN r5638). Was a problem with blank data fields.
-
- The syntax error problem has been fixed in SVN commit:986ea537 (SVN r5638). Was a problem with blank data fields.
-
- Is it possible to attach the problem file?
-
- When one quits qgis, a box pops up asking if you want to save the project. I find this annoying most of the time, so ...
-
- Quite a few of the dialog boxes in qgis don't remember their location and size - I think that they should. Culprits i...
2006-07-24
-
- Since the problem seems to be caused by malformed URLs, I've added some information in the latest QGIS User Guide (re...
-
- Since the problem seems to be caused by malformed URLs, I've added some information in the latest QGIS User Guide (re...
-
- Hi,
apparently this is sufficient:
http://www2.demis.nl/wms/wms.asp
etc.
Now it works.
thanks
Markus -
- It would be great to be able to chose a data column in order to display point symbols in a size which is proportionat...
2006-07-23
-
- Using the following URLs worked:
DEMIS: http://www2.demis.nl/wms/wms.asp?wms=WorldMap&
QGIS: http://qgis.org/cgi-bi... -
- This is easier to read:...
-
- OUTPUT FROM ATTEMPT TO LOAD DEMIS COUNTRY LAYER
gsHttpTransaction::getSynchronously: Using 'http://www2.demis.nl/maps... -
- It would help if you could attach to this ticket, QGIS's output to the console during one of these episodes. Even be...
-
- I'll close as it was a theoretical bug. In fact, I looked a little further and realised that the assumption made in ...
-
- I'll close as it was a theoretical bug. In fact, I looked a little further and realised that the assumption made in ...
-
- Fixed in commit:e57f22e0 (SVN r5628). There is a followup issue in #204 but that can be addressed in a post-0.8 time...
-
- Fixed in commit:e57f22e0 (SVN r5628). There is a followup issue in #204 but that can be addressed in a post-0.8 time...
-
- If a map canvas has 2 or more rasters added to it, in different projections, only the first projection is honoured. ...
-
- The import fails with a message:
Field count for the delimited text file is 20
Fatal: ASSERT failure in QList<T>::op... -
- Applied in SVN .
-
- Applied in SVN .
2006-07-22
-
- The request for a usb entry can be an enhancement for the next version of qgis...
What is the qgpbabel command line ... -
- I've worked out why drap and drops seem inconsistent - they only happen if the source layer has the same underlying d...
2006-07-21
-
- Resolving as duplicate of #3906.
-
- Resolving as duplicate of #3906.
-
- this seems the same as #3906. Better merge the two?
-
- #169 is a duplicate of this. Paolo says:
It would be very useful to have the possibility of saving layer properties ... -
- this seems the same as #169. Better merge the two?
-
- the report is misplaced. I think the good name should refer to GPS USB port, and I think this is an useful (probably ...
-
02:00 AM Feature request #201 (Closed): Support usb connections to GPS's
- Dear Sir / Madam
First a comment on a brilliant package.
Second I have a New Garmin that uses USB connection and th... -
- By the way, I see that qgsmaplayerset.cpp file has not set svn:keywords property so $Id$ keyword is not expanded.
-
- I've forgot to provide version of my compiler:
mloskot:~$ gcc --version
gcc (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
ins... -
- Today, I updated my QGIS sandbox and tried to do complete rebuild.
I got following error and compilation stopped:
<p...
2006-07-20
-
- I was a bit rash in assigning this bug to myself - my version of qgis running on Linux loads and displays the shp fil...
Also available in: Atom