Activity
From 2006-08-06 to 2006-09-04
2006-09-04
-
11:49 PM Bug report #257 (Closed): Usability: Some UI widgets too wide or too small or badly placed
- Some QGIS dialogs have bad looking widgets mainly due being too small or too large.
"Create new WMS connection" all ... -
02:47 AM Bug report #253 (Closed): crash when using the *Identify Features* tool
- Fixed in SVN commit:15bde541 (SVN r5759). All it took was that last clue...
-
- Fixed in SVN commit:15bde541 (SVN r5759). All it took was that last clue...
-
02:02 AM Bug report #253: crash when using the *Identify Features* tool
- My QGIS has the same behavior only when I close the "Identify Features" window with the x Button at the UR window cor...
2006-09-02
-
- Fixed in SVN commit:6a136c17 (SVN r5754). This commit also includes lots of other fixes and improvements to the geore...
-
- Fixed in SVN commit:6a136c17 (SVN r5754). This commit also includes lots of other fixes and improvements to the geore...
2006-09-01
-
- A speculative fix for this is in SVN commit:7c7acf52 (SVN r5750). Please try it out Tim.
-
- Are you able to do some more debugging to find out where in the [[QgsMapToolIdentify]]::identifyVectorLayer function ...
-
04:49 AM Bug report #253: crash when using the *Identify Features* tool
- I hope it could help:
(gdb) bt
#0 0xa75e5dc0 in QWidget::raise () from /usr/lib/libQtGui.so.4
#3905 0xa6b34a6a in [... -
- version
------------------------------------------------------------------------------------------------------------... -
- version
------------------------------------------------------------------------------------------------------------... -
- That table definition works for me - see attachment. What version of postgres are you using? I can't think of much el...
-
- CREATE TABLE fix (
cat integer DEFAULT nextval('cat_fix'::regclass) NOT NULL,
id_radio smallint,
data dat... -
- Works for me. What is the definition of your table?
-
- I tried resizing, open/closing the dialog box but nothing appened.
I'm sorry.
-
- Beats me. Is there anything you can do to the dialog box to make the operator appear? Could you try resizing the dial...
-
- # On the box where QGIS was compiled:
lia@helo:~$ dpkg --list | grep qt | grep dev
ii libqt4-dev ... -
- What version of qt is your version of qgis compiled against?
-
Can you provide a gdb backtrace for when it crashes please. Perhaps it is related to ticket #155?
2006-08-31
-
- Further testing: samples values are showed (correctly) when I choose the column name. Operators instead are not showe...
-
- It shows them for me. Can you attach a screenshot to illustrate?
-
- Can you provide a gdb backtrace please.
-
- This is a problem in Qt. Change to Qt 4.1.4 and it should go away (see ticket #51).
-
- This is a problem in Qt. Change to Qt 4.1.4 and it should go away (see ticket #51).
-
- When I click "Add vector/raster layer" and it opens directory WITHOUT any vector or raster layer in it, also no direc...
-
- On Linux version it just opens empty window with QGIS in title and then waits forever without any activity (no output...
-
- I fixed problem with 'rm -r ~/.config/QuantumGIS/'
I leave it open, as there still should be no segfault due old con... -
- 2 bugs in one:
1) if GISBASE is undefined, user gets prompted for GISBASE at QGIS start. Those, who are unfamiliar ...
2006-08-30
-
- Trying to open existing GRASS mapset results in QGIS crash.
Steps to reproduce:
1 Start qgis ;)
2 Select Plugi... -
02:17 AM Bug report #3912: WMS Proxy username and password not working
- Hi,
proxy works now, great & thanks.
But strangely you have to add 'http://' into
the WMS URL (while not needed else...
2006-08-29
-
10:11 PM Bug report #221 (Closed): can't connect wms server
- I think this is fixed in latest SVN
-
- I think this is fixed in latest SVN
-
- Fixed by Radim
-
- Fixed by Radim
-
- At the second identification of a feature (postgis layers in our case), qgis regularly segfaults. r5742
-
- The (very useful) query builder for [[PostGIS]] layers does no longer show operators and examples. Only textual SQL q...
-
- Further testing: the situation is already much better than before, but in my view the correct behaviour would be for ...
-
- Further testing: the situation is already much better than before, but in my view the correct behaviour would be for ...
-
- Further testing: the default values are actually committed (which is good), they're just not shown in the dialog wind...
-
- We confirm that it is not working: default fields are not pre-filled (r 5742).
-
- We confirm that it is not working: default fields are not pre-filled (r 5742).
-
04:53 AM Bug report #251 (Closed): Installing on to Ubuntu Dapper Drake 6.06
- When attempting to install _qgis0.74_, a number of libraries where also required to be installed,
but the show stoppe...
2006-08-28
-
- Load a shapefile, open the attribute table, and then click the Close button in the attribute dialog. OS X crashes aft...
-
07:49 PM Bug report #249 (Closed): Attribute search fails when using non ascii search string
- When I search using a non ascii phrase such as 'Barão Geraldo' QGIS throws an error.
-
07:24 AM Bug report #200: QGIS crashes on broken SHP file
- As we talked with Tim and Frank on the #gdal, the problem is that attached jrline.shp file includes truncated feature...
-
06:26 AM Bug report #246: QGIS 0.8.0 Preview 1 crashes on loading a shapefile
- Tried to attach file - response it is to big, also tried to email to qgisATqgisDOTcom as compressed file - response d...
2006-08-27
-
- When using Qgis, it crashes out with a seg fault when I'm loading a large shapefile. The file contains all the 911 r...
2006-08-25
-
- I've tried all sorts of things to try to reproduce this problem but no luck. Feel free to reopen it if it still exists.
-
- I've tried all sorts of things to try to reproduce this problem but no luck. Feel free to reopen it if it still exists.
-
- Since the original reporter has stopped trying to resolve this problem (see earlier comment), and no one else appears...
-
- Since the original reporter has stopped trying to resolve this problem (see earlier comment), and no one else appears...
-
- What works for me is libtoolize 1.5.12, autoheader 2.59, automake 1.95., and autoconf 2.59, although what you have s...
-
- They are the standard (at this moment) versions in Debian stable:...
-
- The srs.db is installed in the proper place, however the path to it is not being set right in code. This results in a...
-
- I've not used makefiles for windows (nor have a compilation environment for windows), so if someone with such experie...
-
03:06 AM Bug report #232: can't identify qgis version with precision
- Hello,
I just updated my winbuild jail and found out, that this change does not affect the Makefile.win (which resul...
2006-08-24
-
- Yes, the problem is fixed in 0.8. Sorry for the false alarm.
-
- Yes, the problem is fixed in 0.8. Sorry for the false alarm.
-
- You can attach a file once the ticket has been created, i.e., now.
-
- PS. Existing projects can be fixed by finding the <layers> line, then editing any subsequent <layer_...> lines and re...
-
- Fixed in SVN .
There were several characters that the XML didn't like in a node name, but which postgres layers had... -
- Fixed in SVN .
There were several characters that the XML didn't like in a node name, but which postgres layers had...
2006-08-23
-
- Please attach one of the shapefiles (preferably the smallest one) so it can be used for testing.
-
- QGIS crashes on loading certain shapefiles in Windows XP Pro. Here is a report generated in XP: - also would like to ...
-
- Is this problem occuring under release 0.8, as that is where the fix was done
-
- I don't think this is completly fixed.
When I try to print, only raster layers are printed. The legend shows the diff... -
- I don't think this is completly fixed.
When I try to print, only raster layers are printed. The legend shows the diff... -
12:41 PM Bug report #247 (Closed): custom projection definition
- Hallo,
maybe i do something wrong, but:
I would like to define my custom projection "Krovak S-JTSK" with
following... -
- I reported this issue to GDAL and Frank Warmerdam will include some better error handling in the next release of gdal...
-
- I reported this issue to GDAL and Frank Warmerdam will include some better error handling in the next release of gdal...
-
-
- The problem seems to be with the '=' character on line 349. This is probably conflicting with XML's use of '=' as a r...
-
- Fixed in SVN commit:866694f3 (SVN r5728)
-
- Fixed in SVN commit:866694f3 (SVN r5728)
-
- Fixed in SVN commit:a1b9be05 (SVN r5727). Hopefully the fix doesn't cause problems elsewhere (the srs code is a bit c...
-
- Fixed in SVN commit:a1b9be05 (SVN r5727). Hopefully the fix doesn't cause problems elsewhere (the srs code is a bit c...
2006-08-22
-
- What version of aclocal, automake, and autoconf are you using?
The autogen.sh script should be warning you if qgis r... -
- Running autogen.sh script is not enought for building qgis 0.8 from the sources as it throws several errors (undefine...
-
- Running autogen.sh script is not enought for building qgis 0.8 from the sources as it throws several errors (undefine...
-
- I had a more detailed look at this....
-
- I was able to replicate this bug (on OSX). It produces the following stacktrace (see below). It looks like there is n...
-
- Open Georeferencer, load image, add point and at window "Enter X, Y", press cancel button. Nothing happens. No reacti...
-
- Now I can reproduce the mentioned bug.
1. I create a mapcomposition with some layers an a legend
2. Save the project... -
- Now I can reproduce the mentioned bug.
1. I create a mapcomposition with some layers an a legend
2. Save the project... -
- For better layer description it would be nice when all available metadata of [[PostGIS]] layers like table comment an...
-
- Make shure that your .shp is writeable. Than it works for me too.
-
- This appears to have been fixed in SVN commit:e5076060 (SVN r5710) (or at least I can edit attribute data in .shp lay...
-
- This appears to have been fixed in SVN commit:e5076060 (SVN r5710) (or at least I can edit attribute data in .shp lay...
-
- Seems to work fine now. Tested both with and without a proxy.
-
- Seems to work fine now. Tested both with and without a proxy.
2006-08-21
-
- Often I need to calculate new field values based on existing layer attribute table fields. For this issue it would be...
-
- Can you provide some more details on what you mean?
-
- Add a feature to calculate field values in attribut tables
-
- More changes in SVN commit:c14a0207 (SVN r5724) that should fix the problem. Needs a bit of testing though...
-
02:52 AM Bug report #3912: WMS Proxy username and password not working
- Correction: commit:18d27449 (SVN r5717) not 5715.
-
- Potential fix in commit:d04ea690 (SVN r5716) based on Gavin's comment of 08/19/06 06:33:52. Please have a test of it...
-
- In many cases it would be very helpful to set a user defined mapscale of the mapview.
-
- I'm having issues getting 4.1.4 but in the meantime this may be another Qt bug that simulates this problem: http://ww...
-
- Done in svn commit:d04ea690 (SVN r5716)
-
- configure now accepts an optional --with-projlibdir option to specify the directory where the proj library is.
-
- configure now accepts an optional --with-projlibdir option to specify the directory where the proj library is.
2006-08-20
-
- Hi,
when creating a new vector map using the GRASS toolsbox (e.g. buffer of
archsites in Spearfish dataset) or when...
2006-08-19
-
- Looks to be fixed - reopen if it's still a problem for you.
-
- Looks to be fixed - reopen if it's still a problem for you.
-
- This behaviour contributes to the problem in ticket #8.
-
- This is the same problem as ticket #214
-
- This is the same problem as ticket #214
-
- Done in SVN commit:c6d88ade (SVN r5711). A make, make install, or make all in the toplevel directory will cause qgis ...
-
- Done in SVN commit:c6d88ade (SVN r5711). A make, make install, or make all in the toplevel directory will cause qgis ...
2006-08-18
-
- Brendan,
The problem here is that the wms provider does not have the proxy information set. The temporary wms provid... -
- Use the autogen.sh script instead and pass your configure parameters to it. At release, a configure script will be in...
-
- Use the autogen.sh script instead and pass your configure parameters to it. At release, a configure script will be in...
-
- The file INSTALL, in source for qgis 0.8.0 preview 1, refers to ./configure script that is missing in the package. Th...
-
- Over the next few days I'll grab the latest Qt (4.1.4) and see if I can reproduce the error. This may be a low-prior...
2006-08-17
-
- I'm in doubt about the relation between the two QT bugs and our problem. 1. They were discovered at version 4.1.2, th...
-
- We're in a bit of a sticky situation here. Versions of Qt prior to 4.1.4 have other problems that have caused bugs in...
-
- Ups... Of course it's my mistake. 4.1.3 throws the messages.
Your suggested solution sounds like ESRI Support. Long ... -
- Is it 4.1.0 that throws up all those warnings or 4.1.3?
I think the resolution to this is to add a release note to a... -
- Works for me as of today, and I'm not sure how would have broken it ...
If somebody else can reproduce this behavio... -
- Works for me as of today, and I'm not sure how would have broken it ...
If somebody else can reproduce this behavio... -
- Fixed in commit:b61cda32 (SVN r5703). It was "only" broken in .
-
- Fixed in commit:b61cda32 (SVN r5703). It was "only" broken in .
-
- Fixed in SVN commit:336ae2a8 (SVN r5706)
-
- Fixed in SVN commit:336ae2a8 (SVN r5706)
-
- A further fix for this problem is in SVN commit:f5433e85 (SVN r5705)
2006-08-16
-
- In QGIS 0.8.0pr2 if I select multiple polygons all them are filled with selection color (correct), but they boundarie...
-
- This problem has been fixed in qgis 0.8 preview versions (see ticket #3933).
-
- This problem has been fixed in qgis 0.8 preview versions (see ticket #3933).
-
- Fixed in svn commit:fce66036 (SVN r5704).
If there are no command line arguments, the extent is -1,-1,1,1, but if t... -
- Fixed in svn commit:fce66036 (SVN r5704).
If there are no command line arguments, the extent is -1,-1,1,1, but if t... -
- My fault. Will fix soon.
-
- [QGIS-SVN recompiled from scratch today]
When loading a SHAPE file into QGIS, such as:
qgis italy_state_LL.shp
it ... -
-
-
- after commit #5694 (fix for bugs 131 and 134), default fields are no longer shown
-
11:52 AM Bug report #120 (Closed): Click a shape in a shapefile, QGIS crashes
- RPM version. rpm -q returns:
geos-2.2.1-4.fc5
Obviously, I have the devel package, too, same version.
Could it be d... -
- RPM version. rpm -q returns:
geos-2.2.1-4.fc5
Obviously, I have the devel package, too, same version.
Could it be d... -
- I have had the same problem before on 32 bit platform. I believe its an issue with GEOS. Which exact version of GEOS ...
-
- Further testing confirms the bug.
It seems to be related to the complexity of the image: with only a greyscale grass ... -
- As a side note, its worth building a spatial index on your shapefiles - it should offer significant performance impro...
-
- I tested on linux and the file loads fine for me too - I will test on mac and see if I can reproduce the issue.
-
-
- I tried your example shapefile with QGIS 0.8 SVN trunk as of 16 August 2006, Ubuntu linux, gdal 1.2.6. The file opene...
-
- OK I changed from QT4.1.3 to QT4.1.0 and the transparency works without rebuild QGIS!! It looks like QT4.1.3 is the c...
-
- Concerning your second point (couldn't open any .qgs files that was created in 0.7.3), this is normal (format of qgs ...
-
- Fixed in SVN commit:fa43c9d3 (SVN r5702)
-
- Fixed in SVN commit:fa43c9d3 (SVN r5702)
2006-08-15
-
- No it is not possible to try it with QT4.1.0 due to some bugs of QT which will have influence to the stability of QGI...
-
- I suppose the same opaque effect could be had for you when the background colour is set to non-white (through the Set...
-
- Delimited text layers don't select properly - select some points, and various points outside the selection rectangle ...
-
- Now it works, thanks.
Markus -
- That pins the problem right down. It is fixed in SVN commit:c62dbcd4 (SVN r5700). A svn update in the georeferencer d...
-
- That pins the problem right down. It is fixed in SVN commit:c62dbcd4 (SVN r5700). A svn update in the georeferencer d...
-
- Hi,
I found something:
cd /usr/local/qgis_devel/lib/qgis
ls -l | grep ref
-rwxr-xr-x 1 neteler ssi 1807886 Aug 1... -
- Note. This only occurs when one starts editing, doesn't edit anything, then stops editing. This particular mode may h...
-
- Recently, qgis has stopped allowing one to stop editing:
1. load a editable layer
2. click on the start editing bu... -
- With SVN commit:07a42c17 (SVN r5698), access to a wms server through a proxy now works for me. I get a list of availa...
-
- Speculative fix in commit:07a42c17 (SVN r5698).
Can somebody please test with a proxy for me and report back, or bui... -
- Tested the HEAD version, WMS proxy is not working at all, and gives a sparse error message.
-
- Tested the HEAD version, WMS proxy is not working at all, and gives a sparse error message.
-
- better close it? I do not think it is still valid, and has general meaning.
-
- better close it? I do not think it is still valid, and has general meaning.
-
- Fixed in SVN commit:80c49f64 (SVN r5699).
-
- Fixed in SVN commit:80c49f64 (SVN r5699).
-
- Potential fix in commit:52e80e90 (SVN r5697).
Can somebody with access to a compiler for the Windows version please ...
2006-08-14
-
- QToolButton::setPaletteBackgroundColor() is being used to colour the buttons, but appears to be a Qt3 idiom. While t...
-
- With qgis-0-8.0-win32-060724 it works for me. But my [[RedHat]] QGIS does not work. If you like to see the spatial Da...
-
- With qgis-0-8.0-win32-060724 it works for me. But my [[RedHat]] QGIS does not work. If you like to see the spatial Da...
2006-08-13
-
- should fix this, I have put a full writeup on the commit message to .
-
- should fix this, I have put a full writeup on the commit message to .
-
- Further to my commentary on 07/14/06, I got to test it out and it was found wanting. should really fix it, I have p...
-
02:38 AM Bug report #235: crash loading shape files
- Yes, I can. I attached one as example (it happens with all my shapes). The version is 0.6.0, the one avaliable for Ma...
-
- Is this shapefile something you can make available to the QGIS developers?
Which version of QGIS are you using? -
02:08 AM Bug report #235 (Closed): crash loading shape files
- Everytime I try to load a shapefile (created with [[ArcView]] 3.1) the QGis crashes. Actually the first time I launch...
2006-08-12
-
- That circular dependency warning occurs with other plugins too, for example, the scale bar. Are you sure that the geo...
2006-08-11
-
- I noticed this problem when building *Lib_Refactoring-branch* branch.
BTW, is this possible to add branches selectio... -
- In file _src/core/gsproviderregistry.cpp_ compiler reports following interesting warnings:...
-
-
-
- The second method fails because when it commits, it tries to commit all attributes of a changed feature instead of ju...
-
- I think I've worked out the "spirit" of this bug, at least with regards to SVN HEAD.
If the attributes are edited vi... -
- I tried your http://www.sogis1.so.ch/cgi-bin/sogis/sogis_uep.wms WMS URL today;
It comes up with one layer (Übersic... -
- I tried your http://www.sogis1.so.ch/cgi-bin/sogis/sogis_uep.wms WMS URL today;
It comes up with one layer (Übersic... -
- Can you give the URL you are trying?
And also, just to confirm, you are not using a username nor password? -
- Hi,
on my Mandriva box I have the georeferencer, but not
on RHEL4 Linux. probably due to this problem:
Making all i... -
- Appled to head
-
- Appled to head
-
2006-08-10
-
01:11 AM Bug report #232 (Closed): can't identify qgis version with precision
- I send only some tickets and I think not very OK to do that.
I've load 3 differentes versions of windows qgis that I ... -
- Hi,
apparently the input field for rows,cols in v.mkgrid is overzealously checked.
The comma separator cannot be ent... -
- Fixed in revision 5686.
Radim -
- Fixed in revision 5686.
Radim -
- I cannot reproduce this on Linux.
Can you try with other databases (DBF,SQLite,Postgres) to see if it is
realy relat... -
- This is enhancement, not defect.
-
- Fixed in revision 5685.
Radim -
- Fixed in revision 5685.
Radim -
- I think that you mean the message:
"Orphan record was left in attribute table. Delete the record?"
That is correct. ... -
- I think that you mean the message:
"Orphan record was left in attribute table. Delete the record?"
That is correct. ... -
- I cannot reproduce this. You can reopen the ticket if
you can still reproduce the problem. In that case please
spec... -
- I cannot reproduce this. You can reopen the ticket if
you can still reproduce the problem. In that case please
spec... -
- Currently I dont work on Win build, assigned to Gary.
-
- I have assigned this ticket to Martin as I dont know even what it is
about. I just see 'canvas' ...
Radim
-
- Currently I am not working on Win build. AFAIK Gary
is making Win build so I assigned it to him.
Sorry Gary, I kn... -
- I tried with various corrupted vector files but I cannot get such error. I thought
that if the vector directory is p... -
- I tried with various corrupted vector files but I cannot get such error. I thought
that if the vector directory is p... -
- Done in SVN
-
- Done in SVN
-
- Unfortunately v.surf.idw parameter in GRASS was changed from col to column.
This has broken QGIS. I have changed the ... -
- Unfortunately v.surf.idw parameter in GRASS was changed from col to column.
This has broken QGIS. I have changed the ... -
- Fixed in revision 5680.
Radim -
- Fixed in revision 5680.
Radim -
- Fixed in SVN commit:6e48f228 (SVN r5680).
-
- Fixed in SVN commit:6e48f228 (SVN r5680).
2006-08-09
-
- After some tests I can't reproduce this issue. I'll set the ticket to invalid until I can report further informations...
-
- After some tests I can't reproduce this issue. I'll set the ticket to invalid until I can report further informations...
-
- Fixed in SVN commit:12fff4ce (SVN r5678)
-
- Fixed in SVN commit:12fff4ce (SVN r5678)
2006-08-08
-
- Fixed in revision revision 5676.
BTW, map tool handling must be enhanced somehow, especially switching between stand... -
- Fixed in revision revision 5676.
BTW, map tool handling must be enhanced somehow, especially switching between stand... -
- Fixed in revision 5675.
Radim -
- Fixed in revision 5675.
Radim -
- The commit:1cc1c875 (SVN r5672) commit may also help when trying to digitise on a blank map and no other layers loaded.
2006-08-07
-
03:30 PM Bug report #230 (Closed): zoom to all button not picking up changes to the extent of PostGIS laye...
- Oeen a single [[PostGIS]] layer. Initially the zoom to layer extent within the layer properties menu does the same as...
2006-08-06
-
- Applied to head as SVN commit:a247aa52 (SVN r5671)
-
- Applied to head as SVN commit:a247aa52 (SVN r5671)
-
- FYI, I applied this small patch to configure.in from the branch called "Lib_Refactoring-branch":https://svn.qgis.org/...
-
- This is a tiny enhancement that prints compilation flag values in the configuration summary at the end of ./configure...
-
- I'm not sure what's the idea behind conditional statements in qgsproject.cpp file, in lines: 126, 204 and 274 where f...
-
- Additional patterns to be ignored:...
-
- I'd like to ask for setting *svn:ignore* property on the non-versioned files and folders in the QGIS repository.
Here...
Also available in: Atom