Bug report #21926

"with interval" value of marker line symbology always reverts to "0" when saving the style to SLD

Added by Navid Taheri over 5 years ago. Updated over 5 years ago.

Status:Open
Priority:Normal
Assignee:-
Category:Symbology
Affected QGIS version:3.6.2 Regression?:No
Operating System: Easy fix?:No
Pull Request or Patch supplied:No Resolution:
Crashes QGIS or corrupts data:No Copied to github as #:29741

Description

I did create SLD files for each vector layers I tested them they were fine when I call them from PostGIS or even path on my system,
I did add a vector layer from GeoServer(WFS) service When I'd try load style from Properties > Load Style I'd surprised because only scale was correct! symbol changed to line with high width, How I can fix this issue?

I should mention my QGIS version is 3.4.7 but I didn't find this version in Affected QGIS version section, therefore I deiced type here

sld_01.png - Add From WMS (161 KB) Navid Taheri, 2019-04-24 08:47 PM

sld_02.png - Add From WFS and Load saved style (167 KB) Navid Taheri, 2019-04-24 08:47 PM

Rail_Road.sld - These are SLD files (2.16 KB) Navid Taheri, 2019-05-02 05:38 PM

Fault.sld - SLD Files (2.11 KB) Navid Taheri, 2019-05-02 05:38 PM

Screenshot_20190502_172748.png (172 KB) Giovanni Manghi, 2019-05-02 06:27 PM

Offset along line.png (99.9 KB) Navid Taheri, 2019-05-02 06:52 PM

History

#1 Updated by Giovanni Manghi over 5 years ago

  • Status changed from Open to Feedback
  • Affected QGIS version changed from 3.4.6 to 3.4.7

Please attach the symbol/style file and a sample of the data you are applying it to.

#2 Updated by Navid Taheri over 5 years ago

Giovanni Manghi wrote:

Please attach the symbol/style file and a sample of the data you are applying it to.

MyDB: http://s9.picofile.com/file/8356844692/zigmamap_backup.7z.html

Pass:T3hr@n_9901

OS:LMDE 3 X64, PostgreSQL 11.2, QGIS 3.4.7

#3 Updated by Giovanni Manghi over 5 years ago

Navid Taheri wrote:

Giovanni Manghi wrote:

Please attach the symbol/style file and a sample of the data you are applying it to.

MyDB: http://s9.picofile.com/file/8356844692/zigmamap_backup.7z.html

Pass:T3hr@n_9901

OS:LMDE 3 X64, PostgreSQL 11.2, QGIS 3.4.7

this is how your SLD style looks like applied to your postgis layer here:

looks like pretty much the same as your image when you have applied it to the WFS layer. The vertical markers in your style have 0 spacing between them, so it is normal it does not look like as you want. It seems that when exporting the style to sld with this specific parameter this is always set to 0.

You may want then to change the subject and description for this ticket, anwyway please look at the others already existing about exporting symbols to SLD, there could be already one covering this case.

#4 Updated by Navid Taheri over 5 years ago

Giovanni Manghi wrote:

Navid Taheri wrote:

Giovanni Manghi wrote:

Please attach the symbol/style file and a sample of the data you are applying it to.

MyDB: http://s9.picofile.com/file/8356844692/zigmamap_backup.7z.html

Pass:T3hr@n_9901

OS:LMDE 3 X64, PostgreSQL 11.2, QGIS 3.4.7

this is how your SLD style looks like applied to your postgis layer here:

looks like pretty much the same as your image when you have applied it to the WFS layer. The vertical markers in your style have 0 spacing between them, so it is normal it does not look like as you want. It seems that when exporting the style to sld with this specific parameter this is always set to 0.

You may want then to change the subject and description for this ticket, anwyway please look at the others already existing about exporting symbols to SLD, there could be already one covering this case.

May I ask you refer me to correct SLD Export Issue?, Because I did search in the middle of Issues but I didn't find same my problem in there moreover It would be helpful if you help me find out specific distance cause to create problem, you mean was offset along line in below image? I must enter non zero number in window and the I can save and load SLD everywhere even without any problem?

#5 Updated by Giovanni Manghi over 5 years ago

Navid Taheri wrote:

May I ask you refer me to correct SLD Export Issue?, Because I did search in the middle of Issues but I didn't find same my problem in there moreover It would be helpful if you help me find out specific distance cause to create problem, you mean was offset along line in below image? I must enter non zero number in window and the I can save and load SLD everywhere even without any problem?

the properties that is reset to 0 (when saving a QGIS style to SLD) is the "with interval" in the last image you posted.

The fact that QGIS styles cannot be translated 100% to SLD is a known "limitation" of QGIS. QGIS style are very advanced so it is not an easy task. If you want to keep your QGIS Desktop symbology in your services then use QGIS Server, and you don't need to worry with SLDs or another style format.

#6 Updated by Navid Taheri over 5 years ago

Giovanni Manghi wrote:

Navid Taheri wrote:

May I ask you refer me to correct SLD Export Issue?, Because I did search in the middle of Issues but I didn't find same my problem in there moreover It would be helpful if you help me find out specific distance cause to create problem, you mean was offset along line in below image? I must enter non zero number in window and the I can save and load SLD everywhere even without any problem?

the properties that is reset to 0 (when saving a QGIS style to SLD) is the "with interval" in the last image you posted.

The fact that QGIS styles cannot be translated 100% to SLD is a known "limitation" of QGIS. QGIS style are very advanced so it is not an easy task. If you want to keep your QGIS Desktop symbology in your services then use QGIS Server, and you don't need to worry with SLDs or another style format.

Than you for your answer,

Hmmm, That's too bad QGIS has this kind of limitation :(, SLD is so important it is face of map,I hope QGIS developer

want remove this limitation in near future, until that I'll run QGIS server beside GeoServer :)

Thank you so much and Thank for your attention.

#7 Updated by Giovanni Manghi over 5 years ago

  • Operating System deleted (LMDE 3 (Linux Mint Debian 9) X64, PostgreSQL 11.2)
  • Subject changed from SLD file saved already without any problem, can't load again properly! to "with interval" value of marker line symbology always reverts to "0" when saving the style to SLD
  • Status changed from Feedback to Open
  • Affected QGIS version changed from 3.4.7 to 3.6.2

Also available in: Atom PDF