QGIS Application: Issues
https://issues.qgis.org/
https://issues.qgis.org/favicon.ico
2019-05-24T06:08:29Z
QGIS Issue Tracking
Redmine
Bug report #22134 (Open): Unable to copy selected rows from attibute table while it is docked
https://issues.qgis.org/issues/22134
2019-05-24T06:08:29Z
URIIT URIIT
kupr@uriit.ru
<p>While the “Dock Attribute Table” button is pressed, it is not possible to copy all selected lines in the attribute table using the “Ctrl + c” key combination.<br />After undocking the attribute table, everything works fine.</p>
<p><img src="https://issues.qgis.org/attachments/download/14979/1.png" alt="" /></p>
Bug report #22133 (Feedback): form not loaded properly from qml file
https://issues.qgis.org/issues/22133
2019-05-23T15:22:48Z
Robin Rotsaert
robin.rotsaert@limburgs-landschap.be
<p>when saving the form-information from one geopackage-layer as a qml-file and trying to load it to another geopackage-layer (both have some entirely equal columns) only the "general" form setup is loaded. The widget type isn't, the defaults neither (haven't checked on the constraints).</p>
Bug report #22132 (Feedback): Slow Vector Layer Line Rendering Speed
https://issues.qgis.org/issues/22132
2019-05-23T12:20:15Z
David MacNeil
david_macneil@hotmail.com
<p>I've had layer rendering speed issues since going from 3.2 to 3.4 which continued on up to 3.6.3. The GPS traces in an 820 MB spatialite database take many times as long to draw as they used to.</p>
<p>Today I stumbled across a workaround for it by accident. When I reduced the line width from the default to 0.03 in order to render a high resolution png, the old performance level was restored. I could increase the line width to 0.13 without a performance hit, but 0.14 or higher and back to molasses.</p>
<p>I'm unsure if there is something special in general about the transition between line thickness at those numbers, or if it maybe be the thickness in my data at which the many parallel lines become wide enough to start overlapping.</p>
Bug report #22131 (Closed): SAGA raster calculator loads more grids than selected when a sdat is ...
https://issues.qgis.org/issues/22131
2019-05-23T10:48:11Z
Pedro Venâncio
pedrongvenancio@gmail.com
<p>SAGA raster calculator loads more grids than selected, when a raster is supplied in .sdat format in XGRIDS.</p>
<p>The formula is</p>
<pre>
{ 'FORMULA' : 'a+b+c', 'GRIDS' : 'D:/Testes/saga/Z_top_res.tif', 'RESAMPLING' : 0, 'RESULT' : 'C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat', 'TYPE' : 7, 'USE_NODATA' : False, 'XGRIDS' : ['D:/Testes/saga/c.sdat','D:/Testes/saga/t_top_res.tif'] }
</pre>
<p>So, 1 raster as GRIDS (<strong>D:/Testes/saga/Z_top_res.tif</strong>), and 2 rasters as XGRIDS (<strong>D:/Testes/saga/c.sdat</strong> and <strong>D:/Testes/saga/t_top_res.tif</strong>).</p>
<p>However, it seems that Processing is importing the sdat raster to the SAGA format:</p>
<pre>
io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd" -FILES "D:\Testes\saga\c.sdat"
</pre>
<p>but as it is already in SAGA format, Processing uses both in raster calculator:</p>
<pre>
grid_calculus "Grid Calculator" -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd" -XGRIDS "D:\Testes\saga\c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd" -FORMULA "a+b+c" -RESAMPLING 0 -USE_NODATA false -TYPE 7 -RESULT "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat"
</pre>
<p>And obviously, the result is wrong, as the identifiers in the formula (b, c, ...) becomes a mess.</p>
<p>This happens in QGIS 3.4.8, 3.6.3, 3.7 (master), but not in QGIS 3.18.28. So this seems a regression.</p>
<p><strong>QGIS 3.4.8</strong><br /><pre>
Processing algorithm…
Algorithm 'Raster calculator' starting…
Input parameters:
{ 'FORMULA' : 'a+b+c', 'GRIDS' : 'D:/Testes/saga/Z_top_res.tif', 'RESAMPLING' : 0, 'RESULT' : 'C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat', 'TYPE' : 7, 'USE_NODATA' : False, 'XGRIDS' : ['D:/Testes/saga/c.sdat','D:/Testes/saga/t_top_res.tif'] }
io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd" -FILES "D:\Testes\saga\Z_top_res.tif"
io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd" -FILES "D:\Testes\saga\c.sdat"
io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd" -FILES "D:\Testes\saga\t_top_res.tif"
grid_calculus "Grid Calculator" -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd" -XGRIDS "D:\Testes\saga\c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd" -FORMULA "a+b+c" -RESAMPLING 0 -USE_NODATA false -TYPE 7 -RESULT "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat"
C:\OSGeo4W64\bin>set SAGA=C:/OSGEO4~1/apps\saga-ltr
C:\OSGeo4W64\bin>set SAGA_MLB=C:/OSGEO4~1/apps\saga-ltr\modules
C:\OSGeo4W64\bin>PATH=C:\OSGEO4~1\apps\qgis-ltr-dev\bin;C:\OSGEO4~1\apps\grass\grass76\lib;C:\OSGEO4~1\apps\grass\grass76\bin;C:\OSGEO4~1\apps\Python37;C:\OSGEO4~1\apps\Python37\Scripts;C:\OSGEO4~1\apps\qt5\bin;C:\OSGEO4~1\apps\Python27\Scripts;C:\OSGEO4~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBem;C:\OSGEO4~1\apps\msys\bin;C:\Program Files\RStudio\bin;C:\OSGEO4~1\apps\Python37\lib\site-packages\numpy\.libs;C:\OSGEO4~1\apps\Python37\lib\site-packages\scipy\extra-dll;C:/OSGEO4~1/apps\saga-ltr;C:/OSGEO4~1/apps\saga-ltr\modules
C:\OSGeo4W64\bin>call saga_cmd io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd" -FILES "D:\Testes\saga\Z_top_res.tif"
____________________________
##### ## ##### ##
### ### ## ###
### # ## ## #### # ##
### ##### ## # #####
##### # ## ##### # ##
____________________________
SAGA Version: 2.3.2 (64 bit)
____________________________
library path: C:\OSGEO4~1\apps\saga-ltr\modules\
library name: io_gdal
library : GDAL/OGR
tool : Import Raster
author : O.Conrad (c) 2007 (A.Ringeler)
processors : 8 [8]
____________________________
Parameters
Grids: No objects
Files: "D:\Testes\saga\Z_top_res.tif"
Select from Multiple Bands:
Alphanumeric Sorting: yes
Transformation: yes
Resampling: B-Spline Interpolation
loading: D:\Testes\saga\Z_top_res.tif
Driver: GTiff
Bands: 1
Rows: 15
Columns: 15
loading: Z_top_res
C:\OSGeo4W64\bin>call saga_cmd io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd" -FILES "D:\Testes\saga\c.sdat"
____________________________
##### ## ##### ##
### ### ## ###
### # ## ## #### # ##
### ##### ## # #####
##### # ## ##### # ##
____________________________
SAGA Version: 2.3.2 (64 bit)
____________________________
library path: C:\OSGEO4~1\apps\saga-ltr\modules\
library name: io_gdal
library : GDAL/OGR
tool : Import Raster
author : O.Conrad (c) 2007 (A.Ringeler)
processors : 8 [8]
____________________________
Parameters
Grids: No objects
Files: "D:\Testes\saga\c.sdat"
Select from Multiple Bands:
Alphanumeric Sorting: yes
Transformation: yes
Resampling: B-Spline Interpolation
loading: D:\Testes\saga\c.sdat
Driver: SAGA
Bands: 1
Rows: 15
Columns: 15
loading: c
C:\OSGeo4W64\bin>call saga_cmd io_gdal 0 -TRANSFORM 1 -RESAMPLING 3 -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd" -FILES "D:\Testes\saga\t_top_res.tif"
____________________________
##### ## ##### ##
### ### ## ###
### # ## ## #### # ##
### ##### ## # #####
##### # ## ##### # ##
____________________________
SAGA Version: 2.3.2 (64 bit)
____________________________
library path: C:\OSGEO4~1\apps\saga-ltr\modules\
library name: io_gdal
library : GDAL/OGR
tool : Import Raster
author : O.Conrad (c) 2007 (A.Ringeler)
processors : 8 [8]
____________________________
Parameters
Grids: No objects
Files: "D:\Testes\saga\t_top_res.tif"
Select from Multiple Bands:
Alphanumeric Sorting: yes
Transformation: yes
Resampling: B-Spline Interpolation
loading: D:\Testes\saga\t_top_res.tif
Driver: GTiff
Bands: 1
Rows: 15
Columns: 15
loading: t_top_res
C:\OSGeo4W64\bin>call saga_cmd grid_calculus "Grid Calculator" -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd" -XGRIDS "D:\Testes\saga\c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd" -FORMULA "a+b+c" -RESAMPLING 0 -USE_NODATA false -TYPE 7 -RESULT "C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat"
____________________________
##### ## ##### ##
### ### ## ###
### # ## ## #### # ##
### ##### ## # #####
##### # ## ##### # ##
____________________________
SAGA Version: 2.3.2 (64 bit)
____________________________
library path: C:\OSGEO4~1\apps\saga-ltr\modules\
library name: grid_calculus
library : Calculus
tool : Grid Calculator
author : A.Ringeler (c) 2003
processors : 8 [8]
____________________________
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/240dff11e1314783baa2a5dab944de47/Ztopres.sgrd...
Load grid: D:\Testes\saga\c.sgrd...
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/b876b2b72535404b883a06d0fdedb4a0/c.sgrd...
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/9a1d1134e6ca4ad68ee59e5424d627b8/ttopres.sgrd...
Parameters
Grid system: 1000; 15x 15y; 472000x 4740000y
Grids: 1 object (Ztopres)
Grids from different Systems: 3 objects (c, c, ttopres)
Resampling: Nearest Neighbour
Result: Result
Formula: a+b+c
Name: Calculation
Take Formula: no
Use NoData: no
Data Type: 4 byte floating point number
Warning: The number of supplied grids exceeds the number of variables in formula. (4 > 3)
C:\OSGeo4W64\bin>exit
Execution completed in 20.79 seconds
Results:
{'RESULT': 'C:/Users/pedro.venancio/AppData/Local/Temp/processing_87ca241799e54598a3ff48cbb44bb515/bbebbd5d3a774a8890c3295a40ce2bde/RESULT.sdat'}
Loading resulting layers
Algorithm 'Raster calculator' finished
</pre></p>
<p><strong>QGIS 3.6.3</strong><br /><pre>
QGIS version: 3.6.3-Noosa
QGIS code revision: 0c5774c068
Qt version: 5.11.2
GDAL version: 2.4.1
GEOS version: 3.7.2-CAPI-1.11.0 b55d2125
PROJ version: 520
Processing algorithm…
Algorithm 'Raster calculator' starting…
Input parameters:
{ 'FORMULA' : '((c-b)/a)*1000', 'GRIDS' : 'D:/Testes/saga/Z_top_res.tif', 'RESAMPLING' : 0, 'RESULT' : 'D:/Testes/saga/d.sdat', 'TYPE' : 7, 'USE_NODATA' : False, 'XGRIDS' : ['D:/Testes/saga/c.sdat','D:/Testes/saga/t_top_res.tif'] }
grid_calculus "Grid Calculator" -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/00c571a7d64f4b32b11eca2358b66db2/Ztopres.sgrd" -XGRIDS "D:\Testes\saga\c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/4c2d1f3a6ac74f2fa23aa3366da7f0a5/c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/dceb5630dc704f7cab4c29ccdd82266b/ttopres.sgrd" -FORMULA "((c-b)/a)*1000" -RESAMPLING 0 -USE_NODATA false -TYPE 7 -RESULT "D:/Testes/saga/d.sdat"
C:\WINDOWS\system32>set SAGA=C:/OSGEO4~1/apps\saga-ltr
C:\WINDOWS\system32>set SAGA_MLB=C:/OSGEO4~1/apps\saga-ltr\modules
C:\WINDOWS\system32>PATH=C:\OSGEO4~1\apps\qgis-rel-dev\bin;C:\OSGEO4~1\apps\grass\grass76\lib;C:\OSGEO4~1\apps\grass\grass76\bin;C:\OSGEO4~1\apps\Python37;C:\OSGEO4~1\apps\Python37\Scripts;C:\OSGEO4~1\apps\qt5\bin;C:\OSGEO4~1\apps\Python27\Scripts;C:\OSGEO4~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBem;C:\OSGEO4~1\apps\msys\bin;C:\Program Files\RStudio\bin;C:\OSGEO4~1\apps\Python37\lib\site-packages\numpy\.libs;C:\OSGEO4~1\apps\Python37\lib\site-packages\scipy\extra-dll;C:/OSGEO4~1/apps\saga-ltr;C:/OSGEO4~1/apps\saga-ltr\modules
C:\WINDOWS\system32>call saga_cmd grid_calculus "Grid Calculator" -GRIDS "C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/00c571a7d64f4b32b11eca2358b66db2/Ztopres.sgrd" -XGRIDS "D:\Testes\saga\c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/4c2d1f3a6ac74f2fa23aa3366da7f0a5/c.sgrd;C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/dceb5630dc704f7cab4c29ccdd82266b/ttopres.sgrd" -FORMULA "((c-b)/a)*1000" -RESAMPLING 0 -USE_NODATA false -TYPE 7 -RESULT "D:/Testes/saga/d.sdat"
____________________________
##### ## ##### ##
### ### ## ###
### # ## ## #### # ##
### ##### ## # #####
##### # ## ##### # ##
____________________________
SAGA Version: 2.3.2 (64 bit)
____________________________
library path: C:\OSGEO4~1\apps\saga-ltr\modules\
library name: grid_calculus
library : Calculus
tool : Grid Calculator
author : A.Ringeler (c) 2003
processors : 8 [8]
____________________________
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/00c571a7d64f4b32b11eca2358b66db2/Ztopres.sgrd...
Load grid: D:\Testes\saga\c.sgrd...
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/4c2d1f3a6ac74f2fa23aa3366da7f0a5/c.sgrd...
Load grid: C:/Users/pedro.venancio/AppData/Local/Temp/processing_6202d43c755f430da81bf61495949469/dceb5630dc704f7cab4c29ccdd82266b/ttopres.sgrd...
Parameters
Grid system: 1000; 15x 15y; 472000x 4740000y
Grids: 1 object (Ztopres)
Grids from different Systems: 3 objects (c, c, ttopres)
Resampling: Nearest Neighbour
Result: Result
Formula: ((c-b)/a)*1000
Name: Calculation
Take Formula: no
Use NoData: no
Data Type: 4 byte floating point number
Warning: The number of supplied grids exceeds the number of variables in formula. (4 > 3)
C:\WINDOWS\system32>exit
Execution completed in 5.87 seconds
Results:
{'RESULT': 'D:/Testes/saga/d.sdat'}
Loading resulting layers
Algorithm 'Raster calculator' finished
</pre></p>
Bug report #22130 (Feedback): qgis crashed in the background
https://issues.qgis.org/issues/22130
2019-05-23T06:30:13Z
Karsten Tebling
karsten.tebling@gmail.com
<a name="User-Feedback"></a>
<h2 >User Feedback<a href="#User-Feedback" class="wiki-anchor">¶</a></h2>
<p>qgis crashed in the background while I was using Firefox, I had one shapefile open, one non-permanent output and one WMS. I recently made a fresh install of qgis with purging all profiles, so this should somewhat be a clean install, I only have one plugin installed by now.</p>
<a name="Report-Details"></a>
<h2 >Report Details<a href="#Report-Details" class="wiki-anchor">¶</a></h2>
<p><strong>Crash ID</strong>: 7d29924f4829425ab791f7ff594e8177cc850b2c</p>
<p><strong>Stack Trace</strong><br /><pre>
QMapDataBase::freeNodeAndRebalance :
QgsAuthMethodRegistry::operator= :
QMetaObject::activate :
QThread::finished :
QThread::currentThreadId :
QThread::start :
BaseThreadInitThunk :
RtlUserThreadStart :
</pre></p>
<p><strong>QGIS Info</strong><br />QGIS Version: 3.6.3-Noosa<br />QGIS code revision: <a class="changeset" href="https://issues.qgis.org/projects/qgis/repository/revisions/0c5774c0685d4b6f3e92a086234455708d1cd427" title="Release of 3.6.3">0c5774c068</a><br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p><strong>System Info</strong><br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 6.1.7601</p>
Bug report #22129 (Feedback): QGIS crashes when opening a new project
https://issues.qgis.org/issues/22129
2019-05-23T04:54:23Z
Neil Bombardier
nbombardier@svc.nsw.gov.au
<p>QGIS 3.6.2 crashed when opening a new project</p>
<a name="User-Feedback"></a>
<h2 >User Feedback<a href="#User-Feedback" class="wiki-anchor">¶</a></h2>
<p>trying to open a different project</p>
<a name="Report-Details"></a>
<h2 >Report Details<a href="#Report-Details" class="wiki-anchor">¶</a></h2>
<p><strong>Crash ID</strong>: d89364a0253e3b92c7eb9e4bc5327eee1e254b05</p>
<p><strong>Stack Trace</strong><br /><pre>
QList<QItemSelectionRange>::empty :
QUndoStack::canRedo :
QgsUndoWidget::indexChanged :
QMetaObject::activate :
QUndoStack::clear :
QUndoStack::~QUndoStack :
QgsProjectFileTransform::operator= :
QObjectPrivate::deleteChildren :
QObject::~QObject :
QgsVectorLayerUndoCommandRenameAttribute::~QgsVectorLayerUndoCommandRenameAttribute :
QgsMapLayerStore::removeMapLayers :
QgsMapLayerStore::removeMapLayers :
QgsMapLayerStore::removeAllMapLayers :
QgsProject::clear :
QgisApp::closeProject :
QgisApp::addProject :
QgisApp::openProject :
QMetaObject::activate :
QMenu::~QMenu :
QMetaObject::activate :
QAction::activate :
QMenu::actionGeometry :
QMenu::actionGeometry :
QMenu::mouseReleaseEvent :
QWidget::event :
QMenu::event :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QApplicationPrivate::sendMouseEvent :
QSizePolicy::QSizePolicy :
QSizePolicy::QSizePolicy :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QGuiApplicationPrivate::processMouseEvent :
QWindowSystemInterface::sendWindowSystemEvents :
QEventDispatcherWin32::processEvents :
TranslateMessageEx :
TranslateMessage :
QEventDispatcherWin32::processEvents :
qt_plugin_query_metadata :
QEventLoop::exec :
QCoreApplication::exec :
main :
BaseThreadInitThunk :
RtlUserThreadStart :
</pre></p>
<p><strong>QGIS Info</strong><br />QGIS Version: 3.6.1-Noosa<br />QGIS code revision: <a class="changeset" href="https://issues.qgis.org/projects/qgis/repository/revisions/2468226bc97b78ef3b193ac2883b7d3de9e3b4d1" title="osgeo4w: updates for grass 7.6.1 (cherry picked from commit a19fc89e5fb71b9e30de7196494b247f243a...">2468226bc9</a><br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p><strong>System Info</strong><br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 6.1.7601</p>
Bug report #22128 (Feedback): Error
https://issues.qgis.org/issues/22128
2019-05-23T02:19:37Z
Jorge Suarez
jasscorp2015@gmail.com
<a name="User-Feedback"></a>
<h2 >User Feedback<a href="#User-Feedback" class="wiki-anchor">¶</a></h2>
<p>only, close the software and show the crash</p>
<a name="Report-Details"></a>
<h2 >Report Details<a href="#Report-Details" class="wiki-anchor">¶</a></h2>
<p><strong>Crash ID</strong>: 92c4d99fcfbe624f97eac76818dd383dafab23aa</p>
<p><strong>Stack Trace</strong><br /><pre>
QgsRubberBand::QgsRubberBand :
QgsRubberBand::asGeometry :
QgsRubberBand::reset :
version :
QMetaObject::activate :
QDockWidget::visibilityChanged :
QDockWidget::event :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QWidgetPrivate::hideChildren :
QWidgetPrivate::hide_helper :
QWidget::setVisible :
QWidgetPrivate::close_helper :
QWidget::~QWidget :
CPLStringList::List :
main :
BaseThreadInitThunk :
RtlUserThreadStart :
</pre></p>
<p><strong>QGIS Info</strong><br />QGIS Version: 3.6.2-Noosa<br />QGIS code revision: <a class="changeset" href="https://issues.qgis.org/projects/qgis/repository/revisions/656500e0c4a7f044ae3b1678e8b512c33640207f" title="Release of 3.6.2">656500e0c4</a><br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p><strong>System Info</strong><br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 10.0.17134</p>
Bug report #22127 (Feedback): When clearing a field, default value is not applied, instead QGIS a...
https://issues.qgis.org/issues/22127
2019-05-23T00:52:36Z
Cory Albrecht
<p>Instead of generating a new default value, QGIS tries to insert the hint used to show what will be generated.</p>
<pre>
2019-05-22T20:47:09 WARNING Erroneous query: UPDATE "Balance of Power"."timeline-countries" SET "feature_uuid"='uuid_generate_v4()',"country_uuid"='uuid_generate_v4()',"alternate_name"=E'{}',"full_name"=E'{}' WHERE "feature_uuid"::text='59f16d38-2b77-4b3f-8cad-436026d3b5e7' returned 7 [ERROR: invalid input syntax for uuid: "uuid_generate_v4()"
LINE 1: ...of Power"."timeline-countries" SET "feature_uuid"='uuid_gene...
^
]
</pre>
<p>Noosa 3.6.2-6f76857</p>
Bug report #22126 (Feedback): Qgis crashes when try to identify a layer
https://issues.qgis.org/issues/22126
2019-05-22T19:47:54Z
KYLE FELIPE VIEIRA ROBERTO
kylefelipe@gmail.com
<a name="User-Feedback"></a>
<h2 >User Feedback<a href="#User-Feedback" class="wiki-anchor">¶</a></h2>
<p>Trying to use identify</p>
<a name="Report-Details"></a>
<h2 >Report Details<a href="#Report-Details" class="wiki-anchor">¶</a></h2>
<p><strong>Crash ID</strong>: 2b12b3653d5ad5dafac8dd1f7b04fa880dcc89d2</p>
<p><strong>Stack Trace</strong><br /><pre>
QgsFilledMarkerSymbolLayerWidget::symbolLayer :
QgsEditorWidgetWrapper::field :
QgsAttributeFormEditorWidget::QgsAttributeFormEditorWidget :
QgsAttributeForm::createWidgetFromDef :
QgsAttributeForm::createWidgetFromDef :
QgsAttributeForm::init :
QgsAttributeForm::QgsAttributeForm :
QgsDualView::init :
QgsRelationEditorWidget::updateUi :
QMetaObject::activate :
QgsCollapsibleGroupBoxBasic::collapsedStateChanged :
QgsCollapsibleGroupBoxBasic::showEvent :
QWidget::event :
QGroupBox::event :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QWidgetPrivate::showChildren :
QWidgetPrivate::show_helper :
QWidget::setVisible :
QDialog::setVisible :
QgsAttributeDialog::show :
QgsFeatureAction::viewFeatureForm :
QgsIdentifyResultsDialog::featureForm :
QgsIdentifyResultsDialog::show :
QgsMapToolIdentifyAction::identifyFromGeometry :
QMetaObject::activate :
QgsMapToolSelect::qt_static_metacall :
QgsMapToolSelect::setSelectionMode :
QgsMapToolIdentifyAction::canvasReleaseEvent :
QgsMapCanvas::mouseReleaseEvent :
QWidget::event :
QFrame::event :
QGraphicsView::viewportEvent :
QCoreApplicationPrivate::sendThroughObjectEventFilters :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QApplicationPrivate::sendMouseEvent :
QSizePolicy::QSizePolicy :
QSizePolicy::QSizePolicy :
QApplicationPrivate::notify_helper :
QApplication::notify :
QgsApplication::notify :
QCoreApplication::notifyInternal2 :
QGuiApplicationPrivate::processMouseEvent :
QWindowSystemInterface::sendWindowSystemEvents :
QEventDispatcherWin32::processEvents :
TranslateMessageEx :
TranslateMessage :
QEventDispatcherWin32::processEvents :
qt_plugin_query_metadata :
QEventLoop::exec :
QCoreApplication::exec :
main :
BaseThreadInitThunk :
RtlUserThreadStart :
</pre></p>
<p><strong>QGIS Info</strong><br />QGIS Version: 3.4.7-Madeira<br />QGIS code revision: <a class="changeset" href="https://issues.qgis.org/projects/qgis/repository/revisions/5c56989325ae651486e12a0c457cea973a78999d" title="Release of 3.4.7">5c56989325</a><br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p><strong>System Info</strong><br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 6.1.7601</p>
Bug report #22125 (Feedback): Plugin processing: The plugin will be disabled because it crashed Q...
https://issues.qgis.org/issues/22125
2019-05-22T14:11:43Z
Shamsuddeen Abdullahi
sabdullahi10@yahoo.com
<p>Plugin processing: The plugin will be disabled because it crashed QGIS during last startup. Please report an issue and re-enable the plugin when the problem has been solved. <strong>Vector</strong> option not working as a result of this</p>
Bug report #22124 (Rejected): proj 6 support in 3.6.x ?
https://issues.qgis.org/issues/22124
2019-05-22T13:14:00Z
landry Landry Breuil
<p>I've upgraded to proj 6.0.0 and since then 3.6.2 fails to load any WMS, messagebox shows:<br /><pre>
CRITICAL Couche non valide : WMS provider Impossible de calculer l'emprise
</pre></p>
<p>on stderr, theres a lot of:<br /><pre>
ERROR 1: PROJ: proj_create: Error -9: unknown elliptical parameter name
ERROR 1: PROJ: proj_create: Error -9: unknown elliptical parameter name
ERROR 1: PROJ: proj_create_from_database: crs not found
ERROR 1: PROJ: proj_create: Error -9: unknown elliptical parameter name
ERROR 1: PROJ: proj_create: Error -9: unknown elliptical parameter name
</pre></p>
<p>it seems the only available proj is 900913, while the server advertises a bunch of EPSG projections.</p>
<p>i can open vector data but i only have "custom" projections.</p>
<p>of course i know proj6 is very new, but cmake machinery is fine building against proj 6, so if it's not supported at all and packagers should stay at proj 5 for now, cmake should complain loudly :)</p>
<p>will try 3.6.3 & proj 6.1.0 but i doubt it'll help, iirc some work was happening in 3.8 for proj 6 support.</p>
Bug report #22120 (Open): Field_name in actions
https://issues.qgis.org/issues/22120
2019-05-22T07:16:59Z
Alessandro Perego
alsper78@gmail.com
<p>(tested on QGIS 3.4.8 on Windows 10)</p>
<p>Actions in field scope have three variables: field_index, field_name, field_value.<br />Field_name doesn’t work when actions run from attribute table.</p>
<p>For example the following python action (in field scope):</p>
<p>from qgis.PyQt import QtWidgets<br />expr = '"[% @field_name <span>]"' + ' = ' + "'[</span> @field_value <span>]'" <br />QtWidgets.QMessageBox.information(None, "[</span> @field_name %]", expr)</p>
<p>works good from Identify Result panel, but when the action run from the attribute table it doesn’t show the name of the field.</p>
<p>A workaround is using the field index:<br />layer = QgsProject.instance().mapLayer('[% @layer_id <span>]')<br />field_name = layer.fields().field([</span> @field_index %]).name()</p>
Bug report #22119 (Open): crashed when saving a few changes
https://issues.qgis.org/issues/22119
2019-05-22T04:32:07Z
Alonso Acuna
acuna007@gmail.com
<a name="User-Feedback"></a>
<h2 >User Feedback<a href="#User-Feedback" class="wiki-anchor">¶</a></h2>
<p>crashed when saving a few changes</p>
<a name="Report-Details"></a>
<h2 >Report Details<a href="#Report-Details" class="wiki-anchor">¶</a></h2>
<p><strong>Crash ID</strong>: e3e9dc422a6d2f320711ed5f0a10ac180d98d1ed</p>
<p><strong>Stack Trace</strong><br /><pre>
memcmp :
VSICreateCachedFile :
SASetupDefaultHooks :
SHPReadObject :
SHPPartTypeName :
SHPPartTypeName :
wildcards :
QgsAbstractFeatureIterator::nextFeature :
QgsVectorLayerFeatureIterator::fetchFeature :
QgsAbstractFeatureIterator::nextFeature :
QgsVectorLayerLabelProvider::registerFeature :
QgsVectorLayerLabelProvider::registerFeature :
QgsMapRendererCustomPainterJob::doRender :
QgsMapRendererCustomPainterJob::staticRender :
QgsMapRendererJob::renderingTime :
QThreadPoolPrivate::reset :
QThread::start :
BaseThreadInitThunk :
RtlUserThreadStart :
</pre></p>
<p><strong>QGIS Info</strong><br />QGIS Version: 3.6.2-Noosa<br />QGIS code revision: <a class="changeset" href="https://issues.qgis.org/projects/qgis/repository/revisions/656500e0c4a7f044ae3b1678e8b512c33640207f" title="Release of 3.6.2">656500e0c4</a><br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p><strong>System Info</strong><br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 6.3.9600</p>
Bug report #22118 (Closed): Majority filter (SAGA) returns erroneous results if input is .tif
https://issues.qgis.org/issues/22118
2019-05-21T19:57:21Z
andre mano
andre.s.mano@gmail.com
<p>When using the majority filter from SAGA, the results seem to be wrong (open attached project for example). This problem occurs if the input raster has the .tif extension. If the extension is .sdat the results are correct (just like in SAGA native). I did not test if this problem occurs with other raster extensions.</p>
<p>I did test it in QGIS 2.8 and the problem is there too (no regression)</p>
Bug report #22117 (Feedback): crashes at start
https://issues.qgis.org/issues/22117
2019-05-21T16:14:05Z
stefano loddo
<p>as soon as I launch QGIS 3.4 Madeira, it crashes at startup, every single time.<br />I tried uninstall it and manually delete remaining keys containing QGis in it</p>
<p>This is the log fiel:</p>
<p>Crash ID: 61546722bd614632fe6392e62f31b92e76e4daf9</p>
<p>Stack Trace</p>
<p>RtlFreeHeap :<br />free :<br />DllUnregisterServer :<br />DllUnregisterServer :<br />CoGetTreatAsClass :<br />CoInitializeEx :<br />CoGetTreatAsClass :<br />CoGetTreatAsClass :<br />CoGetTreatAsClass :<br />CoGetTreatAsClass :<br />CoGetTreatAsClass :<br />CoGetTreatAsClass :<br />CoInitializeEx :<br />CoInitializeEx :<br />CoInitializeEx :<br />CoTaskMemRealloc :<br />CoTaskMemRealloc :<br />SHBindToParent :<br />Ordinal866 :<br />AssocCreateForClasses :<br />SHCreateQueryCancelAutoPlayMoniker :<br />SHCreateQueryCancelAutoPlayMoniker :<br />SHCreateQueryCancelAutoPlayMoniker :<br />SHCreateQueryCancelAutoPlayMoniker :<br />SHCreateQueryCancelAutoPlayMoniker :<br />Ordinal893 :<br />Ordinal211 :<br />SHILCreateFromPath :<br />Ordinal904 :<br />OpenRegStream :<br />OpenRegStream :<br />ILFree :<br />DllCanUnloadNow :<br />RtlGetNtProductType :<br />RtlFreeUnicodeString :<br />BaseThreadInitThunk :<br />RtlUserThreadStart :</p>
<p>QGIS Info<br />QGIS Version: 3.4.8-Madeira<br />QGIS code revision: 04ee8e0761<br />Compiled against Qt: 5.11.2<br />Running against Qt: 5.11.2<br />Compiled against GDAL: 2.4.1<br />Running against GDAL: 2.4.1</p>
<p>System Info<br />CPU Type: x86_64<br />Kernel Type: winnt<br />Kernel Version: 6.3.9600</p>
<p>QGis is stand-alone installed and Windows 8.1 is on my PC</p>
<p>Thank you</p>